[ARM] 3865/1: AT91RM9200 header updates

This is more preparation for adding support for the new Atmel AT91SAM9
processors.

Changes include:
- Replace AT91_BASE_* with AT91RM9200_BASE_*
- Replace AT91_ID_* with AT91RM9200_ID_*
- ROM, SRAM and UHP address definitions moved to at91rm9200.h.
- The raw AT91_P[ABCD]_* definitions are now depreciated in favour of
the GPIO API.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

4 files changed, 7 insertions, 7 deletions

diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
index 6b7638b84290..4b3d4d637030 100644
--- a/drivers/mmc/at91_mci.c
+++ b/drivers/mmc/at91_mci.c
@@ -850,7 +850,7 @@ static int at91_mci_probe(struct platform_device *pdev)
 	/*
 	 * Allocate the MCI interrupt
 	 */
-	ret = request_irq(AT91_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
+	ret = request_irq(AT91RM9200_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
 	if (ret) {
 		printk(KERN_ERR "Failed to request MCI interrupt\n");
 		clk_disable(mci_clk);
@@ -906,7 +906,7 @@ static int at91_mci_remove(struct platform_device *pdev)
 
 	mmc_remove_host(mmc);
 	at91_mci_disable();
-	free_irq(AT91_ID_MCI, host);
+	free_irq(AT91RM9200_ID_MCI, host);
 	mmc_free_host(mmc);
 
 	clk_disable(mci_clk);				/* Disable the peripheral clock */
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 95b28aa01f4f..3ecf2cc53a7c 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -947,7 +947,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
 		return -ENOMEM;
 
 	dev->base_addr = AT91_VA_BASE_EMAC;
-	dev->irq = AT91_ID_EMAC;
+	dev->irq = AT91RM9200_ID_EMAC;
 	SET_MODULE_OWNER(dev);
 
 	/* Install the interrupt handler */
diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c
index 54c6b2adf7b7..bf4bf103e5a0 100644
--- a/drivers/serial/at91_serial.c
+++ b/drivers/serial/at91_serial.c
@@ -139,7 +139,7 @@ static void at91_set_mctrl(struct uart_port *port, u_int mctrl)
 		 * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
 		 *  We need to drive the pin manually.
 		 */
-		if (port->mapbase == AT91_BASE_US0) {
+		if (port->mapbase == AT91RM9200_BASE_US0) {
 			if (mctrl & TIOCM_RTS)
 				at91_set_gpio_value(AT91_PIN_PA21, 0);
 			else
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index cfebca05ead5..043744f1ab72 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1658,7 +1658,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) {
+	if (!request_mem_region(AT91RM9200_BASE_UDP, SZ_16K, driver_name)) {
 		DBG("someone's using UDC memory\n");
 		return -EBUSY;
 	}
@@ -1720,7 +1720,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
 fail1:
 	device_unregister(&udc->gadget.dev);
 fail0:
-	release_mem_region(AT91_BASE_UDP, SZ_16K);
+	release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
 	DBG("%s probe failed, %d\n", driver_name, retval);
 	return retval;
 }
@@ -1742,7 +1742,7 @@ static int __devexit at91udc_remove(struct platform_device *pdev)
 		free_irq(udc->board.vbus_pin, udc);
 	free_irq(udc->udp_irq, udc);
 	device_unregister(&udc->gadget.dev);
-	release_mem_region(AT91_BASE_UDP, SZ_16K);
+	release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
 
 	clk_put(udc->iclk);
 	clk_put(udc->fclk);