Merge tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-cricitical bug fixes from Arnd Bergmann:
 "These are various bug fixes that were not considered important enough
  for merging into 3.10.

  The majority of the ARM fixes are for the OMAP and at91 platforms, and
  there is another set of bug fixes for device drivers that resolve
  'randconfig' build errors and that the subsystem maintainers either
  did not pick up or preferred to get merged through the arm-soc tree."

* tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  ARM: at91/PMC: use at91_usb_rate() for UTMI PLL
  ARM: at91/PMC: fix at91sam9n12 USB FS init
  ARM: at91/PMC: at91sam9n12 family has a PLLB
  ARM: at91/PMC: sama5d3 family doesn't have a PLLB
  ARM: tegra: fix section mismatch in tegra_pmc_parse_dt
  ARM: mxs: don't select HAVE_PWM
  ARM: mxs: stub out mxs_pm_init for !CONFIG_PM
  cpuidle: calxeda: select ARM_CPU_SUSPEND
  ARM: mvebu: fix length of ethernet registers in mv78260 dtsi
  ARM: at91: cpuidle: Fix target_residency
  ARM: at91: fix at91_extern_irq usage for non-dt boards
  ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessary
  clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change
  X.509: do not emit any informational output
  mtd: omap2: allow bulding as a module
  [SCSI] nsp32: use mdelay instead of large udelay constants
  hwrng: bcm2835: fix MODULE_LICENSE tag
  ARM: at91: Change the internal SRAM memory type MT_MEMORY_NONCACHED
  ARM: at91: Fix link breakage when !CONFIG_PHYLIB
  MAINTAINERS: Add exynos filename match to ARM/S5P EXYNOS ARM ARCHITECTURES
  ...

12 files changed, 16 insertions, 21 deletions

diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c
index eb7f14725ebd..43577ca780e3 100644
--- a/drivers/char/hw_random/bcm2835-rng.c
+++ b/drivers/char/hw_random/bcm2835-rng.c
@@ -110,4 +110,4 @@ module_platform_driver(bcm2835_rng_driver);
 
 MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
 MODULE_DESCRIPTION("BCM2835 Random Number Generator (RNG) driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 137d3e730f86..f0e46997bb12 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_ARCH_SOCFPGA)	+= socfpga/
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
 obj-$(CONFIG_ARCH_U300)		+= clk-u300.o
 obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
-obj-$(CONFIG_ARCH_PRIMA2)	+= clk-prima2.o
+obj-$(CONFIG_ARCH_SIRF)		+= clk-prima2.o
 obj-$(CONFIG_PLAT_ORION)	+= mvebu/
 ifeq ($(CONFIG_COMMON_CLK), y)
 obj-$(CONFIG_ARCH_MMP)		+= mmp/
diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
index 350f49356458..ba3d85904c9a 100644
--- a/drivers/clocksource/bcm_kona_timer.c
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -103,16 +103,10 @@ static const struct of_device_id bcm_timer_ids[] __initconst = {
 	{},
 };
 
-static void __init kona_timers_init(void)
+static void __init kona_timers_init(struct device_node *node)
 {
-	struct device_node *node;
 	u32 freq;
 
-	node = of_find_matching_node(NULL, bcm_timer_ids);
-
-	if (!node)
-		panic("No timer");
-
 	if (!of_property_read_u32(node, "clock-frequency", &freq))
 		arch_timer_rate = freq;
 	else
@@ -199,13 +193,12 @@ static struct irqaction kona_timer_irq = {
 	.handler = kona_timer_interrupt,
 };
 
-static void __init kona_timer_init(void)
+static void __init kona_timer_init(struct device_node *node)
 {
-	kona_timers_init();
+	kona_timers_init(node);
 	kona_timer_clockevents_init();
 	setup_irq(timers.tmr_irq, &kona_timer_irq);
 	kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
 }
 
-CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer",
-	kona_timer_init);
+CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer", kona_timer_init);
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index c4cc27e5c8a5..e21cdfa4002a 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -36,6 +36,7 @@ if CPU_IDLE
 config CPU_IDLE_CALXEDA
 	bool "CPU Idle Driver for Calxeda processors"
 	depends on ARCH_HIGHBANK
+	select ARM_CPU_SUSPEND
 	help
 	  Select this to enable cpuidle on Calxeda processors.
 
diff --git a/drivers/gpio/gpio-msm-v1.c b/drivers/gpio/gpio-msm-v1.c
index c798585a3fe5..fb2cc90d0134 100644
--- a/drivers/gpio/gpio-msm-v1.c
+++ b/drivers/gpio/gpio-msm-v1.c
@@ -630,7 +630,7 @@ static struct irq_chip msm_gpio_irq_chip = {
 	.irq_set_type  = msm_gpio_irq_set_type,
 };
 
-static int __devinit gpio_msm_v1_probe(struct platform_device *pdev)
+static int gpio_msm_v1_probe(struct platform_device *pdev)
 {
 	int i, j = 0;
 	const struct platform_device_id *dev_id = platform_get_device_id(pdev);
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 631736e2e7ed..73e2e7db2b64 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -685,7 +685,7 @@ config I2C_SIMTEC
 
 config I2C_SIRF
 	tristate "CSR SiRFprimaII I2C interface"
-	depends on ARCH_PRIMA2
+	depends on ARCH_SIRF
 	help
 	  If you say yes to this option, support will be included for the
 	  CSR SiRFprimaII I2C interface.
diff --git a/drivers/irqchip/irq-renesas-irqc.c b/drivers/irqchip/irq-renesas-irqc.c
index 927bff373aac..2f404ba61c6c 100644
--- a/drivers/irqchip/irq-renesas-irqc.c
+++ b/drivers/irqchip/irq-renesas-irqc.c
@@ -248,8 +248,8 @@ static int irqc_probe(struct platform_device *pdev)
 
 	return 0;
 err3:
-	for (; k >= 0; k--)
-		free_irq(p->irq[k - 1].requested_irq, &p->irq[k - 1]);
+	while (--k >= 0)
+		free_irq(p->irq[k].requested_irq, &p->irq[k]);
 
 	irq_domain_remove(p->irq_domain);
 err2:
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a60f6c17f57b..50543f166215 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -95,7 +95,7 @@ config MTD_NAND_OMAP2
 
 config MTD_NAND_OMAP_BCH
 	depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3
-	bool "Enable support for hardware BCH error correction"
+	tristate "Enable support for hardware BCH error correction"
 	default n
 	select BCH
 	select BCH_CONST_PARAMS
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 1e3879dcbdcc..0665f9cfdb02 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -2899,7 +2899,7 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data)
 	 * reset SCSI bus
 	 */
 	nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST);
-	udelay(RESET_HOLD_TIME);
+	mdelay(RESET_HOLD_TIME / 1000);
 	nsp32_write1(base, SCSI_BUS_CONTROL, 0);
 	for(i = 0; i < 5; i++) {
 		intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 92a9345d7a6b..10f99f45a29b 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -404,7 +404,7 @@ config SPI_SH_HSPI
 
 config SPI_SIRF
 	tristate "CSR SiRFprimaII SPI controller"
-	depends on ARCH_PRIMA2
+	depends on ARCH_SIRF
 	select SPI_BITBANG
 	help
 	  SPI driver for CSR SiRFprimaII SoCs
diff --git a/drivers/ssbi/ssbi.c b/drivers/ssbi/ssbi.c
index f32da0258a8e..e561d3be54a5 100644
--- a/drivers/ssbi/ssbi.c
+++ b/drivers/ssbi/ssbi.c
@@ -350,6 +350,7 @@ static struct of_device_id ssbi_match_table[] = {
 	{ .compatible = "qcom,ssbi" },
 	{}
 };
+MODULE_DEVICE_TABLE(of, ssbi_match_table);
 
 static struct platform_driver ssbi_driver = {
 	.probe		= ssbi_probe,
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 46dd1c72feda..5e3d68917ffe 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -251,7 +251,7 @@ config SERIAL_SAMSUNG_CONSOLE
 
 config SERIAL_SIRFSOC
         tristate "SiRF SoC Platform Serial port support"
-        depends on ARCH_PRIMA2
+        depends on ARCH_SIRF
         select SERIAL_CORE
         help
           Support for the on-chip UART on the CSR SiRFprimaII series,