Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-05-28

Here's a set of patches intended for 4.2. The majority of the changes
are on the 802.15.4 side of things rather than Bluetooth related:

 - All sorts of cleanups & fixes to ieee802154 and related drivers
 - Rework of tx power support in ieee802154 and its drivers
 - Support for setting ieee802154 tx power through nl802154
 - New IDs for the btusb driver
 - Various cleanups & smaller fixes to btusb
 - New btrtl driver for Realtec devices
 - Fix suspend/resume for Realtek devices

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

19 files changed, 1733 insertions, 782 deletions

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index ed5c2738bea2..2e777071e1dc 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -9,6 +9,10 @@ config BT_BCM
 	tristate
 	select FW_LOADER
 
+config BT_RTL
+	tristate
+	select FW_LOADER
+
 config BT_HCIBTUSB
 	tristate "HCI USB driver"
 	depends on USB
@@ -32,6 +36,17 @@ config BT_HCIBTUSB_BCM
 
 	  Say Y here to compile support for Broadcom protocol.
 
+config BT_HCIBTUSB_RTL
+	bool "Realtek protocol support"
+	depends on BT_HCIBTUSB
+	select BT_RTL
+	default y
+	help
+	  The Realtek protocol support enables firmware and configuration
+	  download support for Realtek Bluetooth controllers.
+
+	  Say Y here to compile support for Realtek protocol.
+
 config BT_HCIBTSDIO
 	tristate "HCI SDIO driver"
 	depends on MMC
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index dd0d9c40b999..f40e194e7080 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_BT_MRVL)		+= btmrvl.o
 obj-$(CONFIG_BT_MRVL_SDIO)	+= btmrvl_sdio.o
 obj-$(CONFIG_BT_WILINK)		+= btwilink.o
 obj-$(CONFIG_BT_BCM)		+= btbcm.o
+obj-$(CONFIG_BT_RTL)		+= btrtl.o
 
 btmrvl-y			:= btmrvl_main.o
 btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 4bba86677adc..728fce38a5a2 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -55,12 +55,6 @@ int btbcm_check_bdaddr(struct hci_dev *hdev)
 	}
 
 	bda = (struct hci_rp_read_bd_addr *)skb->data;
-	if (bda->status) {
-		BT_ERR("%s: BCM: Device address result failed (%02x)",
-		       hdev->name, bda->status);
-		kfree_skb(skb);
-		return -bt_to_errno(bda->status);
-	}
 
 	/* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
 	 * with no configured address.
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 2d43d4279b00..828f2f8d1568 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -53,12 +53,6 @@ int btintel_check_bdaddr(struct hci_dev *hdev)
 	}
 
 	bda = (struct hci_rp_read_bd_addr *)skb->data;
-	if (bda->status) {
-		BT_ERR("%s: Intel device address result failed (%02x)",
-		       hdev->name, bda->status);
-		kfree_skb(skb);
-		return -bt_to_errno(bda->status);
-	}
 
 	/* For some Intel based controllers, the default Bluetooth device
 	 * address 00:03:19:9E:8B:00 can be found. These controllers are
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 01d6da577eeb..b9a811900f6a 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -1217,7 +1217,7 @@ static void btmrvl_sdio_dump_firmware(struct btmrvl_private *priv)
 	unsigned int reg, reg_start, reg_end;
 	enum rdwr_status stat;
 	u8 *dbg_ptr, *end_ptr, *fw_dump_data, *fw_dump_ptr;
-	u8 dump_num, idx, i, read_reg, doneflag = 0;
+	u8 dump_num = 0, idx, i, read_reg, doneflag = 0;
 	u32 memory_size, fw_dump_len = 0;
 
 	/* dump sdio register first */
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
new file mode 100644
index 000000000000..84288938f7f2
--- /dev/null
+++ b/drivers/bluetooth/btrtl.c
@@ -0,0 +1,390 @@
+/*
+ *  Bluetooth support for Realtek devices
+ *
+ *  Copyright (C) 2015 Endless Mobile, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <asm/unaligned.h>
+#include <linux/usb.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btrtl.h"
+
+#define VERSION "0.1"
+
+#define RTL_EPATCH_SIGNATURE	"Realtech"
+#define RTL_ROM_LMP_3499	0x3499
+#define RTL_ROM_LMP_8723A	0x1200
+#define RTL_ROM_LMP_8723B	0x8723
+#define RTL_ROM_LMP_8821A	0x8821
+#define RTL_ROM_LMP_8761A	0x8761
+
+static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version)
+{
+	struct rtl_rom_version_evt *rom_version;
+	struct sk_buff *skb;
+
+	/* Read RTL ROM version command */
+	skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: Read ROM version failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->len != sizeof(*rom_version)) {
+		BT_ERR("%s: RTL version event length mismatch", hdev->name);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	rom_version = (struct rtl_rom_version_evt *)skb->data;
+	BT_INFO("%s: rom_version status=%x version=%x",
+		hdev->name, rom_version->status, rom_version->version);
+
+	*version = rom_version->version;
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
+				   const struct firmware *fw,
+				   unsigned char **_buf)
+{
+	const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 };
+	struct rtl_epatch_header *epatch_info;
+	unsigned char *buf;
+	int i, ret, len;
+	size_t min_size;
+	u8 opcode, length, data, rom_version = 0;
+	int project_id = -1;
+	const unsigned char *fwptr, *chip_id_base;
+	const unsigned char *patch_length_base, *patch_offset_base;
+	u32 patch_offset = 0;
+	u16 patch_length, num_patches;
+	const u16 project_id_to_lmp_subver[] = {
+		RTL_ROM_LMP_8723A,
+		RTL_ROM_LMP_8723B,
+		RTL_ROM_LMP_8821A,
+		RTL_ROM_LMP_8761A
+	};
+
+	ret = rtl_read_rom_version(hdev, &rom_version);
+	if (ret)
+		return ret;
+
+	min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
+	if (fw->size < min_size)
+		return -EINVAL;
+
+	fwptr = fw->data + fw->size - sizeof(extension_sig);
+	if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) {
+		BT_ERR("%s: extension section signature mismatch", hdev->name);
+		return -EINVAL;
+	}
+
+	/* Loop from the end of the firmware parsing instructions, until
+	 * we find an instruction that identifies the "project ID" for the
+	 * hardware supported by this firwmare file.
+	 * Once we have that, we double-check that that project_id is suitable
+	 * for the hardware we are working with.
+	 */
+	while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) {
+		opcode = *--fwptr;
+		length = *--fwptr;
+		data = *--fwptr;
+
+		BT_DBG("check op=%x len=%x data=%x", opcode, length, data);
+
+		if (opcode == 0xff) /* EOF */
+			break;
+
+		if (length == 0) {
+			BT_ERR("%s: found instruction with length 0",
+			       hdev->name);
+			return -EINVAL;
+		}
+
+		if (opcode == 0 && length == 1) {
+			project_id = data;
+			break;
+		}
+
+		fwptr -= length;
+	}
+
+	if (project_id < 0) {
+		BT_ERR("%s: failed to find version instruction", hdev->name);
+		return -EINVAL;
+	}
+
+	if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) {
+		BT_ERR("%s: unknown project id %d", hdev->name, project_id);
+		return -EINVAL;
+	}
+
+	if (lmp_subver != project_id_to_lmp_subver[project_id]) {
+		BT_ERR("%s: firmware is for %x but this is a %x", hdev->name,
+		       project_id_to_lmp_subver[project_id], lmp_subver);
+		return -EINVAL;
+	}
+
+	epatch_info = (struct rtl_epatch_header *)fw->data;
+	if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) {
+		BT_ERR("%s: bad EPATCH signature", hdev->name);
+		return -EINVAL;
+	}
+
+	num_patches = le16_to_cpu(epatch_info->num_patches);
+	BT_DBG("fw_version=%x, num_patches=%d",
+	       le32_to_cpu(epatch_info->fw_version), num_patches);
+
+	/* After the rtl_epatch_header there is a funky patch metadata section.
+	 * Assuming 2 patches, the layout is:
+	 * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2
+	 *
+	 * Find the right patch for this chip.
+	 */
+	min_size += 8 * num_patches;
+	if (fw->size < min_size)
+		return -EINVAL;
+
+	chip_id_base = fw->data + sizeof(struct rtl_epatch_header);
+	patch_length_base = chip_id_base + (sizeof(u16) * num_patches);
+	patch_offset_base = patch_length_base + (sizeof(u16) * num_patches);
+	for (i = 0; i < num_patches; i++) {
+		u16 chip_id = get_unaligned_le16(chip_id_base +
+						 (i * sizeof(u16)));
+		if (chip_id == rom_version + 1) {
+			patch_length = get_unaligned_le16(patch_length_base +
+							  (i * sizeof(u16)));
+			patch_offset = get_unaligned_le32(patch_offset_base +
+							  (i * sizeof(u32)));
+			break;
+		}
+	}
+
+	if (!patch_offset) {
+		BT_ERR("%s: didn't find patch for chip id %d",
+		       hdev->name, rom_version);
+		return -EINVAL;
+	}
+
+	BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i);
+	min_size = patch_offset + patch_length;
+	if (fw->size < min_size)
+		return -EINVAL;
+
+	/* Copy the firmware into a new buffer and write the version at
+	 * the end.
+	 */
+	len = patch_length;
+	buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4);
+
+	*_buf = buf;
+	return len;
+}
+
+static int rtl_download_firmware(struct hci_dev *hdev,
+				 const unsigned char *data, int fw_len)
+{
+	struct rtl_download_cmd *dl_cmd;
+	int frag_num = fw_len / RTL_FRAG_LEN + 1;
+	int frag_len = RTL_FRAG_LEN;
+	int ret = 0;
+	int i;
+
+	dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL);
+	if (!dl_cmd)
+		return -ENOMEM;
+
+	for (i = 0; i < frag_num; i++) {
+		struct sk_buff *skb;
+
+		BT_DBG("download fw (%d/%d)", i, frag_num);
+
+		dl_cmd->index = i;
+		if (i == (frag_num - 1)) {
+			dl_cmd->index |= 0x80; /* data end */
+			frag_len = fw_len % RTL_FRAG_LEN;
+		}
+		memcpy(dl_cmd->data, data, frag_len);
+
+		/* Send download command */
+		skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd,
+				     HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			BT_ERR("%s: download fw command failed (%ld)",
+			       hdev->name, PTR_ERR(skb));
+			ret = -PTR_ERR(skb);
+			goto out;
+		}
+
+		if (skb->len != sizeof(struct rtl_download_response)) {
+			BT_ERR("%s: download fw event length mismatch",
+			       hdev->name);
+			kfree_skb(skb);
+			ret = -EIO;
+			goto out;
+		}
+
+		kfree_skb(skb);
+		data += RTL_FRAG_LEN;
+	}
+
+out:
+	kfree(dl_cmd);
+	return ret;
+}
+
+static int btrtl_setup_rtl8723a(struct hci_dev *hdev)
+{
+	const struct firmware *fw;
+	int ret;
+
+	BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name);
+	ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &hdev->dev);
+	if (ret < 0) {
+		BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name);
+		return ret;
+	}
+
+	if (fw->size < 8) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Check that the firmware doesn't have the epatch signature
+	 * (which is only for RTL8723B and newer).
+	 */
+	if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) {
+		BT_ERR("%s: unexpected EPATCH signature!", hdev->name);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = rtl_download_firmware(hdev, fw->data, fw->size);
+
+out:
+	release_firmware(fw);
+	return ret;
+}
+
+static int btrtl_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver,
+				const char *fw_name)
+{
+	unsigned char *fw_data = NULL;
+	const struct firmware *fw;
+	int ret;
+
+	BT_INFO("%s: rtl: loading %s", hdev->name, fw_name);
+	ret = request_firmware(&fw, fw_name, &hdev->dev);
+	if (ret < 0) {
+		BT_ERR("%s: Failed to load %s", hdev->name, fw_name);
+		return ret;
+	}
+
+	ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data);
+	if (ret < 0)
+		goto out;
+
+	ret = rtl_download_firmware(hdev, fw_data, ret);
+	kfree(fw_data);
+	if (ret < 0)
+		goto out;
+
+out:
+	release_firmware(fw);
+	return ret;
+}
+
+static struct sk_buff *btrtl_read_local_version(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != sizeof(struct hci_rp_read_local_version)) {
+		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
+		       hdev->name);
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+int btrtl_setup_realtek(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	struct hci_rp_read_local_version *resp;
+	u16 lmp_subver;
+
+	skb = btrtl_read_local_version(hdev);
+	if (IS_ERR(skb))
+		return -PTR_ERR(skb);
+
+	resp = (struct hci_rp_read_local_version *)skb->data;
+	BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
+		"lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev,
+		resp->lmp_ver, resp->lmp_subver);
+
+	lmp_subver = le16_to_cpu(resp->lmp_subver);
+	kfree_skb(skb);
+
+	/* Match a set of subver values that correspond to stock firmware,
+	 * which is not compatible with standard btusb.
+	 * If matched, upload an alternative firmware that does conform to
+	 * standard btusb. Once that firmware is uploaded, the subver changes
+	 * to a different value.
+	 */
+	switch (lmp_subver) {
+	case RTL_ROM_LMP_8723A:
+	case RTL_ROM_LMP_3499:
+		return btrtl_setup_rtl8723a(hdev);
+	case RTL_ROM_LMP_8723B:
+		return btrtl_setup_rtl8723b(hdev, lmp_subver,
+					    "rtl_bt/rtl8723b_fw.bin");
+	case RTL_ROM_LMP_8821A:
+		return btrtl_setup_rtl8723b(hdev, lmp_subver,
+					    "rtl_bt/rtl8821a_fw.bin");
+	case RTL_ROM_LMP_8761A:
+		return btrtl_setup_rtl8723b(hdev, lmp_subver,
+					    "rtl_bt/rtl8761a_fw.bin");
+	default:
+		BT_INFO("rtl: assuming no firmware upload needed.");
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(btrtl_setup_realtek);
+
+MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>");
+MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
new file mode 100644
index 000000000000..38ffe4890cd1
--- /dev/null
+++ b/drivers/bluetooth/btrtl.h
@@ -0,0 +1,52 @@
+/*
+ *  Bluetooth support for Realtek devices
+ *
+ *  Copyright (C) 2015 Endless Mobile, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ */
+
+#define RTL_FRAG_LEN 252
+
+struct rtl_download_cmd {
+	__u8 index;
+	__u8 data[RTL_FRAG_LEN];
+} __packed;
+
+struct rtl_download_response {
+	__u8 status;
+	__u8 index;
+} __packed;
+
+struct rtl_rom_version_evt {
+	__u8 status;
+	__u8 version;
+} __packed;
+
+struct rtl_epatch_header {
+	__u8 signature[8];
+	__le32 fw_version;
+	__le16 num_patches;
+} __packed;
+
+#if IS_ENABLED(CONFIG_BT_RTL)
+
+int btrtl_setup_realtek(struct hci_dev *hdev);
+
+#else
+
+static inline int btrtl_setup_realtek(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+
+#endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 3c10d4dfe9a7..94c6c048130f 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -31,13 +31,14 @@
 
 #include "btintel.h"
 #include "btbcm.h"
+#include "btrtl.h"
 
 #define VERSION "0.8"
 
 static bool disable_scofix;
 static bool force_scofix;
 
-static bool reset = 1;
+static bool reset = true;
 
 static struct usb_driver btusb_driver;
 
@@ -330,6 +331,7 @@ static const struct usb_device_id blacklist_table[] = {
 #define BTUSB_FIRMWARE_LOADED	7
 #define BTUSB_FIRMWARE_FAILED	8
 #define BTUSB_BOOTING		9
+#define BTUSB_RESET_RESUME	10
 
 struct btusb_data {
 	struct hci_dev       *hdev;
@@ -1372,378 +1374,6 @@ static int btusb_setup_csr(struct hci_dev *hdev)
 	return ret;
 }
 
-#define RTL_FRAG_LEN 252
-
-struct rtl_download_cmd {
-	__u8 index;
-	__u8 data[RTL_FRAG_LEN];
-} __packed;
-
-struct rtl_download_response {
-	__u8 status;
-	__u8 index;
-} __packed;
-
-struct rtl_rom_version_evt {
-	__u8 status;
-	__u8 version;
-} __packed;
-
-struct rtl_epatch_header {
-	__u8 signature[8];
-	__le32 fw_version;
-	__le16 num_patches;
-} __packed;
-
-#define RTL_EPATCH_SIGNATURE	"Realtech"
-#define RTL_ROM_LMP_3499	0x3499
-#define RTL_ROM_LMP_8723A	0x1200
-#define RTL_ROM_LMP_8723B	0x8723
-#define RTL_ROM_LMP_8821A	0x8821
-#define RTL_ROM_LMP_8761A	0x8761
-
-static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version)
-{
-	struct rtl_rom_version_evt *rom_version;
-	struct sk_buff *skb;
-	int ret;
-
-	/* Read RTL ROM version command */
-	skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		BT_ERR("%s: Read ROM version failed (%ld)",
-		       hdev->name, PTR_ERR(skb));
-		return PTR_ERR(skb);
-	}
-
-	if (skb->len != sizeof(*rom_version)) {
-		BT_ERR("%s: RTL version event length mismatch", hdev->name);
-		kfree_skb(skb);
-		return -EIO;
-	}
-
-	rom_version = (struct rtl_rom_version_evt *)skb->data;
-	BT_INFO("%s: rom_version status=%x version=%x",
-		hdev->name, rom_version->status, rom_version->version);
-
-	ret = rom_version->status;
-	if (ret == 0)
-		*version = rom_version->version;
-
-	kfree_skb(skb);
-	return ret;
-}
-
-static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver,
-				   const struct firmware *fw,
-				   unsigned char **_buf)
-{
-	const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 };
-	struct rtl_epatch_header *epatch_info;
-	unsigned char *buf;
-	int i, ret, len;
-	size_t min_size;
-	u8 opcode, length, data, rom_version = 0;
-	int project_id = -1;
-	const unsigned char *fwptr, *chip_id_base;
-	const unsigned char *patch_length_base, *patch_offset_base;
-	u32 patch_offset = 0;
-	u16 patch_length, num_patches;
-	const u16 project_id_to_lmp_subver[] = {
-		RTL_ROM_LMP_8723A,
-		RTL_ROM_LMP_8723B,
-		RTL_ROM_LMP_8821A,
-		RTL_ROM_LMP_8761A
-	};
-
-	ret = rtl_read_rom_version(hdev, &rom_version);
-	if (ret)
-		return -bt_to_errno(ret);
-
-	min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
-	if (fw->size < min_size)
-		return -EINVAL;
-
-	fwptr = fw->data + fw->size - sizeof(extension_sig);
-	if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) {
-		BT_ERR("%s: extension section signature mismatch", hdev->name);
-		return -EINVAL;
-	}
-
-	/* Loop from the end of the firmware parsing instructions, until
-	 * we find an instruction that identifies the "project ID" for the
-	 * hardware supported by this firwmare file.
-	 * Once we have that, we double-check that that project_id is suitable
-	 * for the hardware we are working with.
-	 */
-	while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) {
-		opcode = *--fwptr;
-		length = *--fwptr;
-		data = *--fwptr;
-
-		BT_DBG("check op=%x len=%x data=%x", opcode, length, data);
-
-		if (opcode == 0xff) /* EOF */
-			break;
-
-		if (length == 0) {
-			BT_ERR("%s: found instruction with length 0",
-			       hdev->name);
-			return -EINVAL;
-		}
-
-		if (opcode == 0 && length == 1) {
-			project_id = data;
-			break;
-		}
-
-		fwptr -= length;
-	}
-
-	if (project_id < 0) {
-		BT_ERR("%s: failed to find version instruction", hdev->name);
-		return -EINVAL;
-	}
-
-	if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) {
-		BT_ERR("%s: unknown project id %d", hdev->name, project_id);
-		return -EINVAL;
-	}
-
-	if (lmp_subver != project_id_to_lmp_subver[project_id]) {
-		BT_ERR("%s: firmware is for %x but this is a %x", hdev->name,
-		       project_id_to_lmp_subver[project_id], lmp_subver);
-		return -EINVAL;
-	}
-
-	epatch_info = (struct rtl_epatch_header *)fw->data;
-	if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) {
-		BT_ERR("%s: bad EPATCH signature", hdev->name);
-		return -EINVAL;
-	}
-
-	num_patches = le16_to_cpu(epatch_info->num_patches);
-	BT_DBG("fw_version=%x, num_patches=%d",
-	       le32_to_cpu(epatch_info->fw_version), num_patches);
-
-	/* After the rtl_epatch_header there is a funky patch metadata section.
-	 * Assuming 2 patches, the layout is:
-	 * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2
-	 *
-	 * Find the right patch for this chip.
-	 */
-	min_size += 8 * num_patches;
-	if (fw->size < min_size)
-		return -EINVAL;
-
-	chip_id_base = fw->data + sizeof(struct rtl_epatch_header);
-	patch_length_base = chip_id_base + (sizeof(u16) * num_patches);
-	patch_offset_base = patch_length_base + (sizeof(u16) * num_patches);
-	for (i = 0; i < num_patches; i++) {
-		u16 chip_id = get_unaligned_le16(chip_id_base +
-						 (i * sizeof(u16)));
-		if (chip_id == rom_version + 1) {
-			patch_length = get_unaligned_le16(patch_length_base +
-							  (i * sizeof(u16)));
-			patch_offset = get_unaligned_le32(patch_offset_base +
-							  (i * sizeof(u32)));
-			break;
-		}
-	}
-
-	if (!patch_offset) {
-		BT_ERR("%s: didn't find patch for chip id %d",
-		       hdev->name, rom_version);
-		return -EINVAL;
-	}
-
-	BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i);
-	min_size = patch_offset + patch_length;
-	if (fw->size < min_size)
-		return -EINVAL;
-
-	/* Copy the firmware into a new buffer and write the version at
-	 * the end.
-	 */
-	len = patch_length;
-	buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4);
-
-	*_buf = buf;
-	return len;
-}
-
-static int rtl_download_firmware(struct hci_dev *hdev,
-				 const unsigned char *data, int fw_len)
-{
-	struct rtl_download_cmd *dl_cmd;
-	int frag_num = fw_len / RTL_FRAG_LEN + 1;
-	int frag_len = RTL_FRAG_LEN;
-	int ret = 0;
-	int i;
-
-	dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL);
-	if (!dl_cmd)
-		return -ENOMEM;
-
-	for (i = 0; i < frag_num; i++) {
-		struct rtl_download_response *dl_resp;
-		struct sk_buff *skb;
-
-		BT_DBG("download fw (%d/%d)", i, frag_num);
-
-		dl_cmd->index = i;
-		if (i == (frag_num - 1)) {
-			dl_cmd->index |= 0x80; /* data end */
-			frag_len = fw_len % RTL_FRAG_LEN;
-		}
-		memcpy(dl_cmd->data, data, frag_len);
-
-		/* Send download command */
-		skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd,
-				     HCI_INIT_TIMEOUT);
-		if (IS_ERR(skb)) {
-			BT_ERR("%s: download fw command failed (%ld)",
-			       hdev->name, PTR_ERR(skb));
-			ret = -PTR_ERR(skb);
-			goto out;
-		}
-
-		if (skb->len != sizeof(*dl_resp)) {
-			BT_ERR("%s: download fw event length mismatch",
-			       hdev->name);
-			kfree_skb(skb);
-			ret = -EIO;
-			goto out;
-		}
-
-		dl_resp = (struct rtl_download_response *)skb->data;
-		if (dl_resp->status != 0) {
-			kfree_skb(skb);
-			ret = bt_to_errno(dl_resp->status);
-			goto out;
-		}
-
-		kfree_skb(skb);
-		data += RTL_FRAG_LEN;
-	}
-
-out:
-	kfree(dl_cmd);
-	return ret;
-}
-
-static int btusb_setup_rtl8723a(struct hci_dev *hdev)
-{
-	struct btusb_data *data = dev_get_drvdata(&hdev->dev);
-	struct usb_device *udev = interface_to_usbdev(data->intf);
-	const struct firmware *fw;
-	int ret;
-
-	BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name);
-	ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &udev->dev);
-	if (ret < 0) {
-		BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name);
-		return ret;
-	}
-
-	if (fw->size < 8) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	/* Check that the firmware doesn't have the epatch signature
-	 * (which is only for RTL8723B and newer).
-	 */
-	if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) {
-		BT_ERR("%s: unexpected EPATCH signature!", hdev->name);
-		ret = -EINVAL;
-		goto out;
-	}
-
-	ret = rtl_download_firmware(hdev, fw->data, fw->size);
-
-out:
-	release_firmware(fw);
-	return ret;
-}
-
-static int btusb_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver,
-				const char *fw_name)
-{
-	struct btusb_data *data = dev_get_drvdata(&hdev->dev);
-	struct usb_device *udev = interface_to_usbdev(data->intf);
-	unsigned char *fw_data = NULL;
-	const struct firmware *fw;
-	int ret;
-
-	BT_INFO("%s: rtl: loading %s", hdev->name, fw_name);
-	ret = request_firmware(&fw, fw_name, &udev->dev);
-	if (ret < 0) {
-		BT_ERR("%s: Failed to load %s", hdev->name, fw_name);
-		return ret;
-	}
-
-	ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data);
-	if (ret < 0)
-		goto out;
-
-	ret = rtl_download_firmware(hdev, fw_data, ret);
-	kfree(fw_data);
-	if (ret < 0)
-		goto out;
-
-out:
-	release_firmware(fw);
-	return ret;
-}
-
-static int btusb_setup_realtek(struct hci_dev *hdev)
-{
-	struct sk_buff *skb;
-	struct hci_rp_read_local_version *resp;
-	u16 lmp_subver;
-
-	skb = btusb_read_local_version(hdev);
-	if (IS_ERR(skb))
-		return -PTR_ERR(skb);
-
-	resp = (struct hci_rp_read_local_version *)skb->data;
-	BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
-		"lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev,
-		resp->lmp_ver, resp->lmp_subver);
-
-	lmp_subver = le16_to_cpu(resp->lmp_subver);
-	kfree_skb(skb);
-
-	/* Match a set of subver values that correspond to stock firmware,
-	 * which is not compatible with standard btusb.
-	 * If matched, upload an alternative firmware that does conform to
-	 * standard btusb. Once that firmware is uploaded, the subver changes
-	 * to a different value.
-	 */
-	switch (lmp_subver) {
-	case RTL_ROM_LMP_8723A:
-	case RTL_ROM_LMP_3499:
-		return btusb_setup_rtl8723a(hdev);
-	case RTL_ROM_LMP_8723B:
-		return btusb_setup_rtl8723b(hdev, lmp_subver,
-					    "rtl_bt/rtl8723b_fw.bin");
-	case RTL_ROM_LMP_8821A:
-		return btusb_setup_rtl8723b(hdev, lmp_subver,
-					    "rtl_bt/rtl8821a_fw.bin");
-	case RTL_ROM_LMP_8761A:
-		return btusb_setup_rtl8723b(hdev, lmp_subver,
-					    "rtl_bt/rtl8761a_fw.bin");
-	default:
-		BT_INFO("rtl: assuming no firmware upload needed.");
-		return 0;
-	}
-}
-
 static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
 						       struct intel_version *ver)
 {
@@ -1951,12 +1581,6 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 	}
 
 	ver = (struct intel_version *)skb->data;
-	if (ver->status) {
-		BT_ERR("%s Intel fw version event failed (%02x)", hdev->name,
-		       ver->status);
-		kfree_skb(skb);
-		return -bt_to_errno(ver->status);
-	}
 
 	BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
 		hdev->name, ver->hw_platform, ver->hw_variant,
@@ -2004,15 +1628,6 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 		return PTR_ERR(skb);
 	}
 
-	if (skb->data[0]) {
-		u8 evt_status = skb->data[0];
-
-		BT_ERR("%s enable Intel manufacturer mode event failed (%02x)",
-		       hdev->name, evt_status);
-		kfree_skb(skb);
-		release_firmware(fw);
-		return -bt_to_errno(evt_status);
-	}
 	kfree_skb(skb);
 
 	disable_patch = 1;
@@ -2358,13 +1973,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	}
 
 	ver = (struct intel_version *)skb->data;
-	if (ver->status) {
-		BT_ERR("%s: Intel version command failure (%02x)",
-		       hdev->name, ver->status);
-		err = -bt_to_errno(ver->status);
-		kfree_skb(skb);
-		return err;
-	}
 
 	/* The hardware platform number has a fixed value of 0x37 and
 	 * for now only accept this single value.
@@ -2439,13 +2047,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	}
 
 	params = (struct intel_boot_params *)skb->data;
-	if (params->status) {
-		BT_ERR("%s: Intel boot parameters command failure (%02x)",
-		       hdev->name, params->status);
-		err = -bt_to_errno(params->status);
-		kfree_skb(skb);
-		return err;
-	}
 
 	BT_INFO("%s: Device revision is %u", hdev->name,
 		le16_to_cpu(params->dev_revid));
@@ -2678,13 +2279,6 @@ static void btusb_hw_error_intel(struct hci_dev *hdev, u8 code)
 		return;
 	}
 
-	if (skb->data[0] != 0x00) {
-		BT_ERR("%s: Exception info command failure (%02x)",
-		       hdev->name, skb->data[0]);
-		kfree_skb(skb);
-		return;
-	}
-
 	BT_ERR("%s: Exception info %s", hdev->name, (char *)(skb->data + 1));
 
 	kfree_skb(skb);
@@ -2792,6 +2386,7 @@ struct qca_device_info {
 static const struct qca_device_info qca_devices_table[] = {
 	{ 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
 	{ 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
+	{ 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
 	{ 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
 	{ 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
 	{ 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
@@ -3175,8 +2770,17 @@ static int btusb_probe(struct usb_interface *intf,
 		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
 	}
 
-	if (id->driver_info & BTUSB_REALTEK)
-		hdev->setup = btusb_setup_realtek;
+#ifdef CONFIG_BT_HCIBTUSB_RTL
+	if (id->driver_info & BTUSB_REALTEK) {
+		hdev->setup = btrtl_setup_realtek;
+
+		/* Realtek devices lose their updated firmware over suspend,
+		 * but the USB hub doesn't notice any status change.
+		 * Explicitly request a device reset on resume.
+		 */
+		set_bit(BTUSB_RESET_RESUME, &data->flags);
+	}
+#endif
 
 	if (id->driver_info & BTUSB_AMP) {
 		/* AMP controllers do not support SCO packets */
@@ -3308,6 +2912,14 @@ static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
 	btusb_stop_traffic(data);
 	usb_kill_anchored_urbs(&data->tx_anchor);
 
+	/* Optionally request a device reset on resume, but only when
+	 * wakeups are disabled. If wakeups are enabled we assume the
+	 * device will stay powered up throughout suspend.
+	 */
+	if (test_bit(BTUSB_RESET_RESUME, &data->flags) &&
+	    !device_may_wakeup(&data->udev->dev))
+		data->udev->reset_resume = 1;
+
 	return 0;
 }
 
diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c
index 55c135b7757a..7a722df97343 100644
--- a/drivers/bluetooth/btwilink.c
+++ b/drivers/bluetooth/btwilink.c
@@ -22,7 +22,7 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  */
-#define DEBUG
+
 #include <linux/platform_device.h>
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index dc8e3d4356a0..fc0056a28b81 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -47,8 +47,8 @@
 
 #include "hci_uart.h"
 
-static bool txcrc = 1;
-static bool hciextn = 1;
+static bool txcrc = true;
+static bool hciextn = true;
 
 #define BCSP_TXWINSIZE	4
 
diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig
index 1a3c3e57aa0b..1dd5ab8e5054 100644
--- a/drivers/net/ieee802154/Kconfig
+++ b/drivers/net/ieee802154/Kconfig
@@ -53,3 +53,13 @@ config IEEE802154_CC2520
 
 	  This driver can also be built as a module. To do so, say M here.
 	  the module will be called 'cc2520'.
+
+config IEEE802154_ATUSB
+	tristate "ATUSB transceiver driver"
+	depends on IEEE802154_DRIVERS && MAC802154 && USB
+	---help---
+	  Say Y here to enable the ATUSB IEEE 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so say M here.
+	  The module will be called 'atusb'.
diff --git a/drivers/net/ieee802154/Makefile b/drivers/net/ieee802154/Makefile
index d77fa4d77e27..cf1d2a6db023 100644
--- a/drivers/net/ieee802154/Makefile
+++ b/drivers/net/ieee802154/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_IEEE802154_FAKELB) += fakelb.o
 obj-$(CONFIG_IEEE802154_AT86RF230) += at86rf230.o
 obj-$(CONFIG_IEEE802154_MRF24J40) += mrf24j40.o
 obj-$(CONFIG_IEEE802154_CC2520) += cc2520.o
+obj-$(CONFIG_IEEE802154_ATUSB) += atusb.o
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 67d00fbc2e0e..2f25a5ed8247 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -35,6 +35,8 @@
 #include <net/mac802154.h>
 #include <net/cfg802154.h>
 
+#include "at86rf230.h"
+
 struct at86rf230_local;
 /* at86rf2xx chip depend data.
  * All timings are in us.
@@ -50,7 +52,7 @@ struct at86rf2xx_chip_data {
 	int rssi_base_val;
 
 	int (*set_channel)(struct at86rf230_local *, u8, u8);
-	int (*get_desense_steps)(struct at86rf230_local *, s32);
+	int (*set_txpower)(struct at86rf230_local *, s32);
 };
 
 #define AT86RF2XX_MAX_BUF		(127 + 3)
@@ -102,200 +104,6 @@ struct at86rf230_local {
 	struct at86rf230_state_change tx;
 };
 
-#define RG_TRX_STATUS	(0x01)
-#define SR_TRX_STATUS		0x01, 0x1f, 0
-#define SR_RESERVED_01_3	0x01, 0x20, 5
-#define SR_CCA_STATUS		0x01, 0x40, 6
-#define SR_CCA_DONE		0x01, 0x80, 7
-#define RG_TRX_STATE	(0x02)
-#define SR_TRX_CMD		0x02, 0x1f, 0
-#define SR_TRAC_STATUS		0x02, 0xe0, 5
-#define RG_TRX_CTRL_0	(0x03)
-#define SR_CLKM_CTRL		0x03, 0x07, 0
-#define SR_CLKM_SHA_SEL		0x03, 0x08, 3
-#define SR_PAD_IO_CLKM		0x03, 0x30, 4
-#define SR_PAD_IO		0x03, 0xc0, 6
-#define RG_TRX_CTRL_1	(0x04)
-#define SR_IRQ_POLARITY		0x04, 0x01, 0
-#define SR_IRQ_MASK_MODE	0x04, 0x02, 1
-#define SR_SPI_CMD_MODE		0x04, 0x0c, 2
-#define SR_RX_BL_CTRL		0x04, 0x10, 4
-#define SR_TX_AUTO_CRC_ON	0x04, 0x20, 5
-#define SR_IRQ_2_EXT_EN		0x04, 0x40, 6
-#define SR_PA_EXT_EN		0x04, 0x80, 7
-#define RG_PHY_TX_PWR	(0x05)
-#define SR_TX_PWR		0x05, 0x0f, 0
-#define SR_PA_LT		0x05, 0x30, 4
-#define SR_PA_BUF_LT		0x05, 0xc0, 6
-#define RG_PHY_RSSI	(0x06)
-#define SR_RSSI			0x06, 0x1f, 0
-#define SR_RND_VALUE		0x06, 0x60, 5
-#define SR_RX_CRC_VALID		0x06, 0x80, 7
-#define RG_PHY_ED_LEVEL	(0x07)
-#define SR_ED_LEVEL		0x07, 0xff, 0
-#define RG_PHY_CC_CCA	(0x08)
-#define SR_CHANNEL		0x08, 0x1f, 0
-#define SR_CCA_MODE		0x08, 0x60, 5
-#define SR_CCA_REQUEST		0x08, 0x80, 7
-#define RG_CCA_THRES	(0x09)
-#define SR_CCA_ED_THRES		0x09, 0x0f, 0
-#define SR_RESERVED_09_1	0x09, 0xf0, 4
-#define RG_RX_CTRL	(0x0a)
-#define SR_PDT_THRES		0x0a, 0x0f, 0
-#define SR_RESERVED_0a_1	0x0a, 0xf0, 4
-#define RG_SFD_VALUE	(0x0b)
-#define SR_SFD_VALUE		0x0b, 0xff, 0
-#define RG_TRX_CTRL_2	(0x0c)
-#define SR_OQPSK_DATA_RATE	0x0c, 0x03, 0
-#define SR_SUB_MODE		0x0c, 0x04, 2
-#define SR_BPSK_QPSK		0x0c, 0x08, 3
-#define SR_OQPSK_SUB1_RC_EN	0x0c, 0x10, 4
-#define SR_RESERVED_0c_5	0x0c, 0x60, 5
-#define SR_RX_SAFE_MODE		0x0c, 0x80, 7
-#define RG_ANT_DIV	(0x0d)
-#define SR_ANT_CTRL		0x0d, 0x03, 0
-#define SR_ANT_EXT_SW_EN	0x0d, 0x04, 2
-#define SR_ANT_DIV_EN		0x0d, 0x08, 3
-#define SR_RESERVED_0d_2	0x0d, 0x70, 4
-#define SR_ANT_SEL		0x0d, 0x80, 7
-#define RG_IRQ_MASK	(0x0e)
-#define SR_IRQ_MASK		0x0e, 0xff, 0
-#define RG_IRQ_STATUS	(0x0f)
-#define SR_IRQ_0_PLL_LOCK	0x0f, 0x01, 0
-#define SR_IRQ_1_PLL_UNLOCK	0x0f, 0x02, 1
-#define SR_IRQ_2_RX_START	0x0f, 0x04, 2
-#define SR_IRQ_3_TRX_END	0x0f, 0x08, 3
-#define SR_IRQ_4_CCA_ED_DONE	0x0f, 0x10, 4
-#define SR_IRQ_5_AMI		0x0f, 0x20, 5
-#define SR_IRQ_6_TRX_UR		0x0f, 0x40, 6
-#define SR_IRQ_7_BAT_LOW	0x0f, 0x80, 7
-#define RG_VREG_CTRL	(0x10)
-#define SR_RESERVED_10_6	0x10, 0x03, 0
-#define SR_DVDD_OK		0x10, 0x04, 2
-#define SR_DVREG_EXT		0x10, 0x08, 3
-#define SR_RESERVED_10_3	0x10, 0x30, 4
-#define SR_AVDD_OK		0x10, 0x40, 6
-#define SR_AVREG_EXT		0x10, 0x80, 7
-#define RG_BATMON	(0x11)
-#define SR_BATMON_VTH		0x11, 0x0f, 0
-#define SR_BATMON_HR		0x11, 0x10, 4
-#define SR_BATMON_OK		0x11, 0x20, 5
-#define SR_RESERVED_11_1	0x11, 0xc0, 6
-#define RG_XOSC_CTRL	(0x12)
-#define SR_XTAL_TRIM		0x12, 0x0f, 0
-#define SR_XTAL_MODE		0x12, 0xf0, 4
-#define RG_RX_SYN	(0x15)
-#define SR_RX_PDT_LEVEL		0x15, 0x0f, 0
-#define SR_RESERVED_15_2	0x15, 0x70, 4
-#define SR_RX_PDT_DIS		0x15, 0x80, 7
-#define RG_XAH_CTRL_1	(0x17)
-#define SR_RESERVED_17_8	0x17, 0x01, 0
-#define SR_AACK_PROM_MODE	0x17, 0x02, 1
-#define SR_AACK_ACK_TIME	0x17, 0x04, 2
-#define SR_RESERVED_17_5	0x17, 0x08, 3
-#define SR_AACK_UPLD_RES_FT	0x17, 0x10, 4
-#define SR_AACK_FLTR_RES_FT	0x17, 0x20, 5
-#define SR_CSMA_LBT_MODE	0x17, 0x40, 6
-#define SR_RESERVED_17_1	0x17, 0x80, 7
-#define RG_FTN_CTRL	(0x18)
-#define SR_RESERVED_18_2	0x18, 0x7f, 0
-#define SR_FTN_START		0x18, 0x80, 7
-#define RG_PLL_CF	(0x1a)
-#define SR_RESERVED_1a_2	0x1a, 0x7f, 0
-#define SR_PLL_CF_START		0x1a, 0x80, 7
-#define RG_PLL_DCU	(0x1b)
-#define SR_RESERVED_1b_3	0x1b, 0x3f, 0
-#define SR_RESERVED_1b_2	0x1b, 0x40, 6
-#define SR_PLL_DCU_START	0x1b, 0x80, 7
-#define RG_PART_NUM	(0x1c)
-#define SR_PART_NUM		0x1c, 0xff, 0
-#define RG_VERSION_NUM	(0x1d)
-#define SR_VERSION_NUM		0x1d, 0xff, 0
-#define RG_MAN_ID_0	(0x1e)
-#define SR_MAN_ID_0		0x1e, 0xff, 0
-#define RG_MAN_ID_1	(0x1f)
-#define SR_MAN_ID_1		0x1f, 0xff, 0
-#define RG_SHORT_ADDR_0	(0x20)
-#define SR_SHORT_ADDR_0		0x20, 0xff, 0
-#define RG_SHORT_ADDR_1	(0x21)
-#define SR_SHORT_ADDR_1		0x21, 0xff, 0
-#define RG_PAN_ID_0	(0x22)
-#define SR_PAN_ID_0		0x22, 0xff, 0
-#define RG_PAN_ID_1	(0x23)
-#define SR_PAN_ID_1		0x23, 0xff, 0
-#define RG_IEEE_ADDR_0	(0x24)
-#define SR_IEEE_ADDR_0		0x24, 0xff, 0
-#define RG_IEEE_ADDR_1	(0x25)
-#define SR_IEEE_ADDR_1		0x25, 0xff, 0
-#define RG_IEEE_ADDR_2	(0x26)
-#define SR_IEEE_ADDR_2		0x26, 0xff, 0
-#define RG_IEEE_ADDR_3	(0x27)
-#define SR_IEEE_ADDR_3		0x27, 0xff, 0
-#define RG_IEEE_ADDR_4	(0x28)
-#define SR_IEEE_ADDR_4		0x28, 0xff, 0
-#define RG_IEEE_ADDR_5	(0x29)
-#define SR_IEEE_ADDR_5		0x29, 0xff, 0
-#define RG_IEEE_ADDR_6	(0x2a)
-#define SR_IEEE_ADDR_6		0x2a, 0xff, 0
-#define RG_IEEE_ADDR_7	(0x2b)
-#define SR_IEEE_ADDR_7		0x2b, 0xff, 0
-#define RG_XAH_CTRL_0	(0x2c)
-#define SR_SLOTTED_OPERATION	0x2c, 0x01, 0
-#define SR_MAX_CSMA_RETRIES	0x2c, 0x0e, 1
-#define SR_MAX_FRAME_RETRIES	0x2c, 0xf0, 4
-#define RG_CSMA_SEED_0	(0x2d)
-#define SR_CSMA_SEED_0		0x2d, 0xff, 0
-#define RG_CSMA_SEED_1	(0x2e)
-#define SR_CSMA_SEED_1		0x2e, 0x07, 0
-#define SR_AACK_I_AM_COORD	0x2e, 0x08, 3
-#define SR_AACK_DIS_ACK		0x2e, 0x10, 4
-#define SR_AACK_SET_PD		0x2e, 0x20, 5
-#define SR_AACK_FVN_MODE	0x2e, 0xc0, 6
-#define RG_CSMA_BE	(0x2f)
-#define SR_MIN_BE		0x2f, 0x0f, 0
-#define SR_MAX_BE		0x2f, 0xf0, 4
-
-#define CMD_REG		0x80
-#define CMD_REG_MASK	0x3f
-#define CMD_WRITE	0x40
-#define CMD_FB		0x20
-
-#define IRQ_BAT_LOW	(1 << 7)
-#define IRQ_TRX_UR	(1 << 6)
-#define IRQ_AMI		(1 << 5)
-#define IRQ_CCA_ED	(1 << 4)
-#define IRQ_TRX_END	(1 << 3)
-#define IRQ_RX_START	(1 << 2)
-#define IRQ_PLL_UNL	(1 << 1)
-#define IRQ_PLL_LOCK	(1 << 0)
-
-#define IRQ_ACTIVE_HIGH	0
-#define IRQ_ACTIVE_LOW	1
-
-#define STATE_P_ON		0x00	/* BUSY */
-#define STATE_BUSY_RX		0x01
-#define STATE_BUSY_TX		0x02
-#define STATE_FORCE_TRX_OFF	0x03
-#define STATE_FORCE_TX_ON	0x04	/* IDLE */
-/* 0x05 */				/* INVALID_PARAMETER */
-#define STATE_RX_ON		0x06
-/* 0x07 */				/* SUCCESS */
-#define STATE_TRX_OFF		0x08
-#define STATE_TX_ON		0x09
-/* 0x0a - 0x0e */			/* 0x0a - UNSUPPORTED_ATTRIBUTE */
-#define STATE_SLEEP		0x0F
-#define STATE_PREP_DEEP_SLEEP	0x10
-#define STATE_BUSY_RX_AACK	0x11
-#define STATE_BUSY_TX_ARET	0x12
-#define STATE_RX_AACK_ON	0x16
-#define STATE_TX_ARET_ON	0x19
-#define STATE_RX_ON_NOCLK	0x1C
-#define STATE_RX_AACK_ON_NOCLK	0x1D
-#define STATE_BUSY_RX_AACK_NOCLK 0x1E
-#define STATE_TRANSITION_IN_PROGRESS 0x1F
-
-#define TRX_STATE_MASK		(0x1F)
-
 #define AT86RF2XX_NUMREGS 0x3F
 
 static void
@@ -1010,7 +818,7 @@ at86rf230_xmit_start(void *context)
 		if (lp->is_tx_from_off) {
 			lp->is_tx_from_off = false;
 			at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON,
-						     at86rf230_xmit_tx_on,
+						     at86rf230_write_frame,
 						     false);
 		} else {
 			at86rf230_async_state_change(lp, ctx, STATE_TX_ON,
@@ -1076,6 +884,50 @@ at86rf23x_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
 	return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
 }
 
+#define AT86RF2XX_MAX_ED_LEVELS 0xF
+static const s32 at86rf23x_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300,
+	-7100, -6900, -6700, -6500, -6300, -6100,
+};
+
+static const s32 at86rf212_ed_levels_100[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-10000, -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200,
+	-8000, -7800, -7600, -7400, -7200, -7000,
+};
+
+static const s32 at86rf212_ed_levels_98[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000,
+	-7800, -7600, -7400, -7200, -7000, -6800,
+};
+
+static inline int
+at86rf212_update_cca_ed_level(struct at86rf230_local *lp, int rssi_base_val)
+{
+	unsigned int cca_ed_thres;
+	int rc;
+
+	rc = at86rf230_read_subreg(lp, SR_CCA_ED_THRES, &cca_ed_thres);
+	if (rc < 0)
+		return rc;
+
+	switch (rssi_base_val) {
+	case -98:
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_98;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_98);
+		lp->hw->phy->cca_ed_level = at86rf212_ed_levels_98[cca_ed_thres];
+		break;
+	case -100:
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
+		lp->hw->phy->cca_ed_level = at86rf212_ed_levels_100[cca_ed_thres];
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	return 0;
+}
+
 static int
 at86rf212_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
 {
@@ -1098,6 +950,10 @@ at86rf212_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
 	if (rc < 0)
 		return rc;
 
+	rc = at86rf212_update_cca_ed_level(lp, lp->data->rssi_base_val);
+	if (rc < 0)
+		return rc;
+
 	/* This sets the symbol_duration according frequency on the 212.
 	 * TODO move this handling while set channel and page in cfg802154.
 	 * We can do that, this timings are according 802.15.4 standard.
@@ -1193,23 +1049,56 @@ at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw,
 	return 0;
 }
 
+#define AT86RF23X_MAX_TX_POWERS 0xF
+static const s32 at86rf233_powers[AT86RF23X_MAX_TX_POWERS + 1] = {
+	400, 370, 340, 300, 250, 200, 100, 0, -100, -200, -300, -400, -600,
+	-800, -1200, -1700,
+};
+
+static const s32 at86rf231_powers[AT86RF23X_MAX_TX_POWERS + 1] = {
+	300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700,
+	-900, -1200, -1700,
+};
+
+#define AT86RF212_MAX_TX_POWERS 0x1F
+static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = {
+	500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700,
+	-800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700,
+	-1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600,
+};
+
+static int
+at86rf23x_set_txpower(struct at86rf230_local *lp, s32 mbm)
+{
+	u32 i;
+
+	for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) {
+		if (lp->hw->phy->supported.tx_powers[i] == mbm)
+			return at86rf230_write_subreg(lp, SR_TX_PWR_23X, i);
+	}
+
+	return -EINVAL;
+}
+
 static int
-at86rf230_set_txpower(struct ieee802154_hw *hw, s8 db)
+at86rf212_set_txpower(struct at86rf230_local *lp, s32 mbm)
 {
-	struct at86rf230_local *lp = hw->priv;
+	u32 i;
 
-	/* typical maximum output is 5dBm with RG_PHY_TX_PWR 0x60, lower five
-	 * bits decrease power in 1dB steps. 0x60 represents extra PA gain of
-	 * 0dB.
-	 * thus, supported values for db range from -26 to 5, for 31dB of
-	 * reduction to 0dB of reduction.
-	 */
-	if (db > 5 || db < -26)
-		return -EINVAL;
+	for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) {
+		if (lp->hw->phy->supported.tx_powers[i] == mbm)
+			return at86rf230_write_subreg(lp, SR_TX_PWR_212, i);
+	}
 
-	db = -(db - 5);
+	return -EINVAL;
+}
+
+static int
+at86rf230_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct at86rf230_local *lp = hw->priv;
 
-	return __at86rf230_write(lp, RG_PHY_TX_PWR, 0x60 | db);
+	return lp->data->set_txpower(lp, mbm);
 }
 
 static int
@@ -1254,28 +1143,19 @@ at86rf230_set_cca_mode(struct ieee802154_hw *hw,
 	return at86rf230_write_subreg(lp, SR_CCA_MODE, val);
 }
 
-static int
-at86rf212_get_desens_steps(struct at86rf230_local *lp, s32 level)
-{
-	return (level - lp->data->rssi_base_val) * 100 / 207;
-}
-
-static int
-at86rf23x_get_desens_steps(struct at86rf230_local *lp, s32 level)
-{
-	return (level - lp->data->rssi_base_val) / 2;
-}
 
 static int
-at86rf230_set_cca_ed_level(struct ieee802154_hw *hw, s32 level)
+at86rf230_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
 {
 	struct at86rf230_local *lp = hw->priv;
+	u32 i;
 
-	if (level < lp->data->rssi_base_val || level > 30)
-		return -EINVAL;
+	for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) {
+		if (hw->phy->supported.cca_ed_levels[i] == mbm)
+			return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, i);
+	}
 
-	return at86rf230_write_subreg(lp, SR_CCA_ED_THRES,
-				      lp->data->get_desense_steps(lp, level));
+	return -EINVAL;
 }
 
 static int
@@ -1365,7 +1245,7 @@ static struct at86rf2xx_chip_data at86rf233_data = {
 	.t_p_ack = 545,
 	.rssi_base_val = -91,
 	.set_channel = at86rf23x_set_channel,
-	.get_desense_steps = at86rf23x_get_desens_steps
+	.set_txpower = at86rf23x_set_txpower,
 };
 
 static struct at86rf2xx_chip_data at86rf231_data = {
@@ -1378,7 +1258,7 @@ static struct at86rf2xx_chip_data at86rf231_data = {
 	.t_p_ack = 545,
 	.rssi_base_val = -91,
 	.set_channel = at86rf23x_set_channel,
-	.get_desense_steps = at86rf23x_get_desens_steps
+	.set_txpower = at86rf23x_set_txpower,
 };
 
 static struct at86rf2xx_chip_data at86rf212_data = {
@@ -1391,7 +1271,7 @@ static struct at86rf2xx_chip_data at86rf212_data = {
 	.t_p_ack = 545,
 	.rssi_base_val = -100,
 	.set_channel = at86rf212_set_channel,
-	.get_desense_steps = at86rf212_get_desens_steps
+	.set_txpower = at86rf212_set_txpower,
 };
 
 static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim)
@@ -1564,8 +1444,21 @@ at86rf230_detect_device(struct at86rf230_local *lp)
 	}
 
 	lp->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AACK |
-			IEEE802154_HW_TXPOWER | IEEE802154_HW_ARET |
-			IEEE802154_HW_AFILT | IEEE802154_HW_PROMISCUOUS;
+			IEEE802154_HW_CSMA_PARAMS |
+			IEEE802154_HW_FRAME_RETRIES | IEEE802154_HW_AFILT |
+			IEEE802154_HW_PROMISCUOUS;
+
+	lp->hw->phy->flags = WPAN_PHY_FLAG_TXPOWER |
+			     WPAN_PHY_FLAG_CCA_ED_LEVEL |
+			     WPAN_PHY_FLAG_CCA_MODE;
+
+	lp->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+		BIT(NL802154_CCA_CARRIER) | BIT(NL802154_CCA_ENERGY_CARRIER);
+	lp->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
+		BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
+
+	lp->hw->phy->supported.cca_ed_levels = at86rf23x_ed_levels;
+	lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf23x_ed_levels);
 
 	lp->hw->phy->cca.mode = NL802154_CCA_ENERGY;
 
@@ -1573,36 +1466,49 @@ at86rf230_detect_device(struct at86rf230_local *lp)
 	case 2:
 		chip = "at86rf230";
 		rc = -ENOTSUPP;
-		break;
+		goto not_supp;
 	case 3:
 		chip = "at86rf231";
 		lp->data = &at86rf231_data;
-		lp->hw->phy->channels_supported[0] = 0x7FFF800;
+		lp->hw->phy->supported.channels[0] = 0x7FFF800;
 		lp->hw->phy->current_channel = 11;
 		lp->hw->phy->symbol_duration = 16;
+		lp->hw->phy->supported.tx_powers = at86rf231_powers;
+		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf231_powers);
 		break;
 	case 7:
 		chip = "at86rf212";
 		lp->data = &at86rf212_data;
 		lp->hw->flags |= IEEE802154_HW_LBT;
-		lp->hw->phy->channels_supported[0] = 0x00007FF;
-		lp->hw->phy->channels_supported[2] = 0x00007FF;
+		lp->hw->phy->supported.channels[0] = 0x00007FF;
+		lp->hw->phy->supported.channels[2] = 0x00007FF;
 		lp->hw->phy->current_channel = 5;
 		lp->hw->phy->symbol_duration = 25;
+		lp->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
+		lp->hw->phy->supported.tx_powers = at86rf212_powers;
+		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers);
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
 		break;
 	case 11:
 		chip = "at86rf233";
 		lp->data = &at86rf233_data;
-		lp->hw->phy->channels_supported[0] = 0x7FFF800;
+		lp->hw->phy->supported.channels[0] = 0x7FFF800;
 		lp->hw->phy->current_channel = 13;
 		lp->hw->phy->symbol_duration = 16;
+		lp->hw->phy->supported.tx_powers = at86rf233_powers;
+		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf233_powers);
 		break;
 	default:
 		chip = "unknown";
 		rc = -ENOTSUPP;
-		break;
+		goto not_supp;
 	}
 
+	lp->hw->phy->cca_ed_level = lp->hw->phy->supported.cca_ed_levels[7];
+	lp->hw->phy->transmit_power = lp->hw->phy->supported.tx_powers[0];
+
+not_supp:
 	dev_info(&lp->spi->dev, "Detected %s chip version %d\n", chip, version);
 
 	return rc;
diff --git a/drivers/net/ieee802154/at86rf230.h b/drivers/net/ieee802154/at86rf230.h
new file mode 100644
index 000000000000..1e6d1cc677f6
--- /dev/null
+++ b/drivers/net/ieee802154/at86rf230.h
@@ -0,0 +1,220 @@
+/*
+ * AT86RF230/RF231 driver
+ *
+ * Copyright (C) 2009-2012 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Written by:
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ * Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
+ */
+
+#ifndef _AT86RF230_H
+#define _AT86RF230_H
+
+#define RG_TRX_STATUS	(0x01)
+#define SR_TRX_STATUS		0x01, 0x1f, 0
+#define SR_RESERVED_01_3	0x01, 0x20, 5
+#define SR_CCA_STATUS		0x01, 0x40, 6
+#define SR_CCA_DONE		0x01, 0x80, 7
+#define RG_TRX_STATE	(0x02)
+#define SR_TRX_CMD		0x02, 0x1f, 0
+#define SR_TRAC_STATUS		0x02, 0xe0, 5
+#define RG_TRX_CTRL_0	(0x03)
+#define SR_CLKM_CTRL		0x03, 0x07, 0
+#define SR_CLKM_SHA_SEL		0x03, 0x08, 3
+#define SR_PAD_IO_CLKM		0x03, 0x30, 4
+#define SR_PAD_IO		0x03, 0xc0, 6
+#define RG_TRX_CTRL_1	(0x04)
+#define SR_IRQ_POLARITY		0x04, 0x01, 0
+#define SR_IRQ_MASK_MODE	0x04, 0x02, 1
+#define SR_SPI_CMD_MODE		0x04, 0x0c, 2
+#define SR_RX_BL_CTRL		0x04, 0x10, 4
+#define SR_TX_AUTO_CRC_ON	0x04, 0x20, 5
+#define SR_IRQ_2_EXT_EN		0x04, 0x40, 6
+#define SR_PA_EXT_EN		0x04, 0x80, 7
+#define RG_PHY_TX_PWR	(0x05)
+#define SR_TX_PWR_23X		0x05, 0x0f, 0
+#define SR_PA_LT_230		0x05, 0x30, 4
+#define SR_PA_BUF_LT_230	0x05, 0xc0, 6
+#define SR_TX_PWR_212		0x05, 0x1f, 0
+#define SR_GC_PA_212		0x05, 0x60, 5
+#define SR_PA_BOOST_LT_212	0x05, 0x80, 7
+#define RG_PHY_RSSI	(0x06)
+#define SR_RSSI			0x06, 0x1f, 0
+#define SR_RND_VALUE		0x06, 0x60, 5
+#define SR_RX_CRC_VALID		0x06, 0x80, 7
+#define RG_PHY_ED_LEVEL	(0x07)
+#define SR_ED_LEVEL		0x07, 0xff, 0
+#define RG_PHY_CC_CCA	(0x08)
+#define SR_CHANNEL		0x08, 0x1f, 0
+#define SR_CCA_MODE		0x08, 0x60, 5
+#define SR_CCA_REQUEST		0x08, 0x80, 7
+#define RG_CCA_THRES	(0x09)
+#define SR_CCA_ED_THRES		0x09, 0x0f, 0
+#define SR_RESERVED_09_1	0x09, 0xf0, 4
+#define RG_RX_CTRL	(0x0a)
+#define SR_PDT_THRES		0x0a, 0x0f, 0
+#define SR_RESERVED_0a_1	0x0a, 0xf0, 4
+#define RG_SFD_VALUE	(0x0b)
+#define SR_SFD_VALUE		0x0b, 0xff, 0
+#define RG_TRX_CTRL_2	(0x0c)
+#define SR_OQPSK_DATA_RATE	0x0c, 0x03, 0
+#define SR_SUB_MODE		0x0c, 0x04, 2
+#define SR_BPSK_QPSK		0x0c, 0x08, 3
+#define SR_OQPSK_SUB1_RC_EN	0x0c, 0x10, 4
+#define SR_RESERVED_0c_5	0x0c, 0x60, 5
+#define SR_RX_SAFE_MODE		0x0c, 0x80, 7
+#define RG_ANT_DIV	(0x0d)
+#define SR_ANT_CTRL		0x0d, 0x03, 0
+#define SR_ANT_EXT_SW_EN	0x0d, 0x04, 2
+#define SR_ANT_DIV_EN		0x0d, 0x08, 3
+#define SR_RESERVED_0d_2	0x0d, 0x70, 4
+#define SR_ANT_SEL		0x0d, 0x80, 7
+#define RG_IRQ_MASK	(0x0e)
+#define SR_IRQ_MASK		0x0e, 0xff, 0
+#define RG_IRQ_STATUS	(0x0f)
+#define SR_IRQ_0_PLL_LOCK	0x0f, 0x01, 0
+#define SR_IRQ_1_PLL_UNLOCK	0x0f, 0x02, 1
+#define SR_IRQ_2_RX_START	0x0f, 0x04, 2
+#define SR_IRQ_3_TRX_END	0x0f, 0x08, 3
+#define SR_IRQ_4_CCA_ED_DONE	0x0f, 0x10, 4
+#define SR_IRQ_5_AMI		0x0f, 0x20, 5
+#define SR_IRQ_6_TRX_UR		0x0f, 0x40, 6
+#define SR_IRQ_7_BAT_LOW	0x0f, 0x80, 7
+#define RG_VREG_CTRL	(0x10)
+#define SR_RESERVED_10_6	0x10, 0x03, 0
+#define SR_DVDD_OK		0x10, 0x04, 2
+#define SR_DVREG_EXT		0x10, 0x08, 3
+#define SR_RESERVED_10_3	0x10, 0x30, 4
+#define SR_AVDD_OK		0x10, 0x40, 6
+#define SR_AVREG_EXT		0x10, 0x80, 7
+#define RG_BATMON	(0x11)
+#define SR_BATMON_VTH		0x11, 0x0f, 0
+#define SR_BATMON_HR		0x11, 0x10, 4
+#define SR_BATMON_OK		0x11, 0x20, 5
+#define SR_RESERVED_11_1	0x11, 0xc0, 6
+#define RG_XOSC_CTRL	(0x12)
+#define SR_XTAL_TRIM		0x12, 0x0f, 0
+#define SR_XTAL_MODE		0x12, 0xf0, 4
+#define RG_RX_SYN	(0x15)
+#define SR_RX_PDT_LEVEL		0x15, 0x0f, 0
+#define SR_RESERVED_15_2	0x15, 0x70, 4
+#define SR_RX_PDT_DIS		0x15, 0x80, 7
+#define RG_XAH_CTRL_1	(0x17)
+#define SR_RESERVED_17_8	0x17, 0x01, 0
+#define SR_AACK_PROM_MODE	0x17, 0x02, 1
+#define SR_AACK_ACK_TIME	0x17, 0x04, 2
+#define SR_RESERVED_17_5	0x17, 0x08, 3
+#define SR_AACK_UPLD_RES_FT	0x17, 0x10, 4
+#define SR_AACK_FLTR_RES_FT	0x17, 0x20, 5
+#define SR_CSMA_LBT_MODE	0x17, 0x40, 6
+#define SR_RESERVED_17_1	0x17, 0x80, 7
+#define RG_FTN_CTRL	(0x18)
+#define SR_RESERVED_18_2	0x18, 0x7f, 0
+#define SR_FTN_START		0x18, 0x80, 7
+#define RG_PLL_CF	(0x1a)
+#define SR_RESERVED_1a_2	0x1a, 0x7f, 0
+#define SR_PLL_CF_START		0x1a, 0x80, 7
+#define RG_PLL_DCU	(0x1b)
+#define SR_RESERVED_1b_3	0x1b, 0x3f, 0
+#define SR_RESERVED_1b_2	0x1b, 0x40, 6
+#define SR_PLL_DCU_START	0x1b, 0x80, 7
+#define RG_PART_NUM	(0x1c)
+#define SR_PART_NUM		0x1c, 0xff, 0
+#define RG_VERSION_NUM	(0x1d)
+#define SR_VERSION_NUM		0x1d, 0xff, 0
+#define RG_MAN_ID_0	(0x1e)
+#define SR_MAN_ID_0		0x1e, 0xff, 0
+#define RG_MAN_ID_1	(0x1f)
+#define SR_MAN_ID_1		0x1f, 0xff, 0
+#define RG_SHORT_ADDR_0	(0x20)
+#define SR_SHORT_ADDR_0		0x20, 0xff, 0
+#define RG_SHORT_ADDR_1	(0x21)
+#define SR_SHORT_ADDR_1		0x21, 0xff, 0
+#define RG_PAN_ID_0	(0x22)
+#define SR_PAN_ID_0		0x22, 0xff, 0
+#define RG_PAN_ID_1	(0x23)
+#define SR_PAN_ID_1		0x23, 0xff, 0
+#define RG_IEEE_ADDR_0	(0x24)
+#define SR_IEEE_ADDR_0		0x24, 0xff, 0
+#define RG_IEEE_ADDR_1	(0x25)
+#define SR_IEEE_ADDR_1		0x25, 0xff, 0
+#define RG_IEEE_ADDR_2	(0x26)
+#define SR_IEEE_ADDR_2		0x26, 0xff, 0
+#define RG_IEEE_ADDR_3	(0x27)
+#define SR_IEEE_ADDR_3		0x27, 0xff, 0
+#define RG_IEEE_ADDR_4	(0x28)
+#define SR_IEEE_ADDR_4		0x28, 0xff, 0
+#define RG_IEEE_ADDR_5	(0x29)
+#define SR_IEEE_ADDR_5		0x29, 0xff, 0
+#define RG_IEEE_ADDR_6	(0x2a)
+#define SR_IEEE_ADDR_6		0x2a, 0xff, 0
+#define RG_IEEE_ADDR_7	(0x2b)
+#define SR_IEEE_ADDR_7		0x2b, 0xff, 0
+#define RG_XAH_CTRL_0	(0x2c)
+#define SR_SLOTTED_OPERATION	0x2c, 0x01, 0
+#define SR_MAX_CSMA_RETRIES	0x2c, 0x0e, 1
+#define SR_MAX_FRAME_RETRIES	0x2c, 0xf0, 4
+#define RG_CSMA_SEED_0	(0x2d)
+#define SR_CSMA_SEED_0		0x2d, 0xff, 0
+#define RG_CSMA_SEED_1	(0x2e)
+#define SR_CSMA_SEED_1		0x2e, 0x07, 0
+#define SR_AACK_I_AM_COORD	0x2e, 0x08, 3
+#define SR_AACK_DIS_ACK		0x2e, 0x10, 4
+#define SR_AACK_SET_PD		0x2e, 0x20, 5
+#define SR_AACK_FVN_MODE	0x2e, 0xc0, 6
+#define RG_CSMA_BE	(0x2f)
+#define SR_MIN_BE		0x2f, 0x0f, 0
+#define SR_MAX_BE		0x2f, 0xf0, 4
+
+#define CMD_REG		0x80
+#define CMD_REG_MASK	0x3f
+#define CMD_WRITE	0x40
+#define CMD_FB		0x20
+
+#define IRQ_BAT_LOW	BIT(7)
+#define IRQ_TRX_UR	BIT(6)
+#define IRQ_AMI		BIT(5)
+#define IRQ_CCA_ED	BIT(4)
+#define IRQ_TRX_END	BIT(3)
+#define IRQ_RX_START	BIT(2)
+#define IRQ_PLL_UNL	BIT(1)
+#define IRQ_PLL_LOCK	BIT(0)
+
+#define IRQ_ACTIVE_HIGH	0
+#define IRQ_ACTIVE_LOW	1
+
+#define STATE_P_ON		0x00	/* BUSY */
+#define STATE_BUSY_RX		0x01
+#define STATE_BUSY_TX		0x02
+#define STATE_FORCE_TRX_OFF	0x03
+#define STATE_FORCE_TX_ON	0x04	/* IDLE */
+/* 0x05 */				/* INVALID_PARAMETER */
+#define STATE_RX_ON		0x06
+/* 0x07 */				/* SUCCESS */
+#define STATE_TRX_OFF		0x08
+#define STATE_TX_ON		0x09
+/* 0x0a - 0x0e */			/* 0x0a - UNSUPPORTED_ATTRIBUTE */
+#define STATE_SLEEP		0x0F
+#define STATE_PREP_DEEP_SLEEP	0x10
+#define STATE_BUSY_RX_AACK	0x11
+#define STATE_BUSY_TX_ARET	0x12
+#define STATE_RX_AACK_ON	0x16
+#define STATE_TX_ARET_ON	0x19
+#define STATE_RX_ON_NOCLK	0x1C
+#define STATE_RX_AACK_ON_NOCLK	0x1D
+#define STATE_BUSY_RX_AACK_NOCLK 0x1E
+#define STATE_TRANSITION_IN_PROGRESS 0x1F
+
+#define TRX_STATE_MASK		(0x1F)
+
+#endif /* !_AT86RF230_H */
diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
new file mode 100644
index 000000000000..5b6bb9adf9ae
--- /dev/null
+++ b/drivers/net/ieee802154/atusb.c
@@ -0,0 +1,699 @@
+/*
+ * atusb.c - Driver for the ATUSB IEEE 802.15.4 dongle
+ *
+ * Written 2013 by Werner Almesberger <werner@almesberger.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2
+ *
+ * Based on at86rf230.c and spi_atusb.c.
+ * at86rf230.c is
+ * Copyright (C) 2009 Siemens AG
+ * Written by: Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com>
+ *
+ * spi_atusb.c is
+ * Copyright (c) 2011 Richard Sharpe <realrichardsharpe@gmail.com>
+ * Copyright (c) 2011 Stefan Schmidt <stefan@datenfreihafen.org>
+ * Copyright (c) 2011 Werner Almesberger <werner@almesberger.net>
+ *
+ * USB initialization is
+ * Copyright (c) 2013 Alexander Aring <alex.aring@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/usb.h>
+#include <linux/skbuff.h>
+
+#include <net/cfg802154.h>
+#include <net/mac802154.h>
+
+#include "at86rf230.h"
+#include "atusb.h"
+
+#define ATUSB_JEDEC_ATMEL	0x1f	/* JEDEC manufacturer ID */
+
+#define ATUSB_NUM_RX_URBS	4	/* allow for a bit of local latency */
+#define ATUSB_ALLOC_DELAY_MS	100	/* delay after failed allocation */
+#define ATUSB_TX_TIMEOUT_MS	200	/* on the air timeout */
+
+struct atusb {
+	struct ieee802154_hw *hw;
+	struct usb_device *usb_dev;
+	int shutdown;			/* non-zero if shutting down */
+	int err;			/* set by first error */
+
+	/* RX variables */
+	struct delayed_work work;	/* memory allocations */
+	struct usb_anchor idle_urbs;	/* URBs waiting to be submitted */
+	struct usb_anchor rx_urbs;	/* URBs waiting for reception */
+
+	/* TX variables */
+	struct usb_ctrlrequest tx_dr;
+	struct urb *tx_urb;
+	struct sk_buff *tx_skb;
+	uint8_t tx_ack_seq;		/* current TX ACK sequence number */
+};
+
+/* at86rf230.h defines values as <reg, mask, shift> tuples. We use the more
+ * traditional style of having registers and or-able values. SR_REG extracts
+ * the register number. SR_VALUE uses the shift to prepare a value accordingly.
+ */
+
+#define __SR_REG(reg, mask, shift)	(reg)
+#define SR_REG(sr)			__SR_REG(sr)
+
+#define __SR_VALUE(reg, mask, shift, val)	((val) << (shift))
+#define SR_VALUE(sr, val)			__SR_VALUE(sr, (val))
+
+/* ----- USB commands without data ----------------------------------------- */
+
+/* To reduce the number of error checks in the code, we record the first error
+ * in atusb->err and reject all subsequent requests until the error is cleared.
+ */
+
+static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
+			     __u8 request, __u8 requesttype,
+			     __u16 value, __u16 index,
+			     void *data, __u16 size, int timeout)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+
+	if (atusb->err)
+		return atusb->err;
+
+	ret = usb_control_msg(usb_dev, pipe, request, requesttype,
+			      value, index, data, size, timeout);
+	if (ret < 0) {
+		atusb->err = ret;
+		dev_err(&usb_dev->dev,
+			"atusb_control_msg: req 0x%02x val 0x%x idx 0x%x, error %d\n",
+			request, value, index, ret);
+	}
+	return ret;
+}
+
+static int atusb_command(struct atusb *atusb, uint8_t cmd, uint8_t arg)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+
+	dev_dbg(&usb_dev->dev, "atusb_command: cmd = 0x%x\n", cmd);
+	return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
+				 cmd, ATUSB_REQ_TO_DEV, arg, 0, NULL, 0, 1000);
+}
+
+static int atusb_write_reg(struct atusb *atusb, uint8_t reg, uint8_t value)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+
+	dev_dbg(&usb_dev->dev, "atusb_write_reg: 0x%02x <- 0x%02x\n",
+		reg, value);
+	return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
+				 ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+				 value, reg, NULL, 0, 1000);
+}
+
+static int atusb_read_reg(struct atusb *atusb, uint8_t reg)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+	uint8_t value;
+
+	dev_dbg(&usb_dev->dev, "atusb: reg = 0x%x\n", reg);
+	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
+				ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				0, reg, &value, 1, 1000);
+	return ret >= 0 ? value : ret;
+}
+
+static int atusb_get_and_clear_error(struct atusb *atusb)
+{
+	int err = atusb->err;
+
+	atusb->err = 0;
+	return err;
+}
+
+/* ----- skb allocation ---------------------------------------------------- */
+
+#define MAX_PSDU	127
+#define MAX_RX_XFER	(1 + MAX_PSDU + 2 + 1)	/* PHR+PSDU+CRC+LQI */
+
+#define SKB_ATUSB(skb)	(*(struct atusb **)(skb)->cb)
+
+static void atusb_in(struct urb *urb);
+
+static int atusb_submit_rx_urb(struct atusb *atusb, struct urb *urb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	struct sk_buff *skb = urb->context;
+	int ret;
+
+	if (!skb) {
+		skb = alloc_skb(MAX_RX_XFER, GFP_KERNEL);
+		if (!skb) {
+			dev_warn_ratelimited(&usb_dev->dev,
+					     "atusb_in: can't allocate skb\n");
+			return -ENOMEM;
+		}
+		skb_put(skb, MAX_RX_XFER);
+		SKB_ATUSB(skb) = atusb;
+	}
+
+	usb_fill_bulk_urb(urb, usb_dev, usb_rcvbulkpipe(usb_dev, 1),
+			  skb->data, MAX_RX_XFER, atusb_in, skb);
+	usb_anchor_urb(urb, &atusb->rx_urbs);
+
+	ret = usb_submit_urb(urb, GFP_KERNEL);
+	if (ret) {
+		usb_unanchor_urb(urb);
+		kfree_skb(skb);
+		urb->context = NULL;
+	}
+	return ret;
+}
+
+static void atusb_work_urbs(struct work_struct *work)
+{
+	struct atusb *atusb =
+	    container_of(to_delayed_work(work), struct atusb, work);
+	struct usb_device *usb_dev = atusb->usb_dev;
+	struct urb *urb;
+	int ret;
+
+	if (atusb->shutdown)
+		return;
+
+	do {
+		urb = usb_get_from_anchor(&atusb->idle_urbs);
+		if (!urb)
+			return;
+		ret = atusb_submit_rx_urb(atusb, urb);
+	} while (!ret);
+
+	usb_anchor_urb(urb, &atusb->idle_urbs);
+	dev_warn_ratelimited(&usb_dev->dev,
+			     "atusb_in: can't allocate/submit URB (%d)\n", ret);
+	schedule_delayed_work(&atusb->work,
+			      msecs_to_jiffies(ATUSB_ALLOC_DELAY_MS) + 1);
+}
+
+/* ----- Asynchronous USB -------------------------------------------------- */
+
+static void atusb_tx_done(struct atusb *atusb, uint8_t seq)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	uint8_t expect = atusb->tx_ack_seq;
+
+	dev_dbg(&usb_dev->dev, "atusb_tx_done (0x%02x/0x%02x)\n", seq, expect);
+	if (seq == expect) {
+		/* TODO check for ifs handling in firmware */
+		ieee802154_xmit_complete(atusb->hw, atusb->tx_skb, false);
+	} else {
+		/* TODO I experience this case when atusb has a tx complete
+		 * irq before probing, we should fix the firmware it's an
+		 * unlikely case now that seq == expect is then true, but can
+		 * happen and fail with a tx_skb = NULL;
+		 */
+		ieee802154_wake_queue(atusb->hw);
+		if (atusb->tx_skb)
+			dev_kfree_skb_irq(atusb->tx_skb);
+	}
+}
+
+static void atusb_in_good(struct urb *urb)
+{
+	struct usb_device *usb_dev = urb->dev;
+	struct sk_buff *skb = urb->context;
+	struct atusb *atusb = SKB_ATUSB(skb);
+	uint8_t len, lqi;
+
+	if (!urb->actual_length) {
+		dev_dbg(&usb_dev->dev, "atusb_in: zero-sized URB ?\n");
+		return;
+	}
+
+	len = *skb->data;
+
+	if (urb->actual_length == 1) {
+		atusb_tx_done(atusb, len);
+		return;
+	}
+
+	if (len + 1 > urb->actual_length - 1) {
+		dev_dbg(&usb_dev->dev, "atusb_in: frame len %d+1 > URB %u-1\n",
+			len, urb->actual_length);
+		return;
+	}
+
+	if (!ieee802154_is_valid_psdu_len(len)) {
+		dev_dbg(&usb_dev->dev, "atusb_in: frame corrupted\n");
+		return;
+	}
+
+	lqi = skb->data[len + 1];
+	dev_dbg(&usb_dev->dev, "atusb_in: rx len %d lqi 0x%02x\n", len, lqi);
+	skb_pull(skb, 1);	/* remove PHR */
+	skb_trim(skb, len);	/* get payload only */
+	ieee802154_rx_irqsafe(atusb->hw, skb, lqi);
+	urb->context = NULL;	/* skb is gone */
+}
+
+static void atusb_in(struct urb *urb)
+{
+	struct usb_device *usb_dev = urb->dev;
+	struct sk_buff *skb = urb->context;
+	struct atusb *atusb = SKB_ATUSB(skb);
+
+	dev_dbg(&usb_dev->dev, "atusb_in: status %d len %d\n",
+		urb->status, urb->actual_length);
+	if (urb->status) {
+		if (urb->status == -ENOENT) { /* being killed */
+			kfree_skb(skb);
+			urb->context = NULL;
+			return;
+		}
+		dev_dbg(&usb_dev->dev, "atusb_in: URB error %d\n", urb->status);
+	} else {
+		atusb_in_good(urb);
+	}
+
+	usb_anchor_urb(urb, &atusb->idle_urbs);
+	if (!atusb->shutdown)
+		schedule_delayed_work(&atusb->work, 0);
+}
+
+/* ----- URB allocation/deallocation --------------------------------------- */
+
+static void atusb_free_urbs(struct atusb *atusb)
+{
+	struct urb *urb;
+
+	while (1) {
+		urb = usb_get_from_anchor(&atusb->idle_urbs);
+		if (!urb)
+			break;
+		if (urb->context)
+			kfree_skb(urb->context);
+		usb_free_urb(urb);
+	}
+}
+
+static int atusb_alloc_urbs(struct atusb *atusb, int n)
+{
+	struct urb *urb;
+
+	while (n) {
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			atusb_free_urbs(atusb);
+			return -ENOMEM;
+		}
+		usb_anchor_urb(urb, &atusb->idle_urbs);
+		n--;
+	}
+	return 0;
+}
+
+/* ----- IEEE 802.15.4 interface operations -------------------------------- */
+
+static void atusb_xmit_complete(struct urb *urb)
+{
+	dev_dbg(&urb->dev->dev, "atusb_xmit urb completed");
+}
+
+static int atusb_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct atusb *atusb = hw->priv;
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+
+	dev_dbg(&usb_dev->dev, "atusb_xmit (%d)\n", skb->len);
+	atusb->tx_skb = skb;
+	atusb->tx_ack_seq++;
+	atusb->tx_dr.wIndex = cpu_to_le16(atusb->tx_ack_seq);
+	atusb->tx_dr.wLength = cpu_to_le16(skb->len);
+
+	usb_fill_control_urb(atusb->tx_urb, usb_dev,
+			     usb_sndctrlpipe(usb_dev, 0),
+			     (unsigned char *)&atusb->tx_dr, skb->data,
+			     skb->len, atusb_xmit_complete, NULL);
+	ret = usb_submit_urb(atusb->tx_urb, GFP_ATOMIC);
+	dev_dbg(&usb_dev->dev, "atusb_xmit done (%d)\n", ret);
+	return ret;
+}
+
+static int atusb_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct atusb *atusb = hw->priv;
+	int ret;
+
+	/* This implicitly sets the CCA (Clear Channel Assessment) mode to 0,
+	 * "Mode 3a, Carrier sense OR energy above threshold".
+	 * We should probably make this configurable. @@@
+	 */
+	ret = atusb_write_reg(atusb, RG_PHY_CC_CCA, channel);
+	if (ret < 0)
+		return ret;
+	msleep(1);	/* @@@ ugly synchronization */
+	return 0;
+}
+
+static int atusb_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	BUG_ON(!level);
+	*level = 0xbe;
+	return 0;
+}
+
+static int atusb_set_hw_addr_filt(struct ieee802154_hw *hw,
+				  struct ieee802154_hw_addr_filt *filt,
+				  unsigned long changed)
+{
+	struct atusb *atusb = hw->priv;
+	struct device *dev = &atusb->usb_dev->dev;
+	uint8_t reg;
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		u16 addr = le16_to_cpu(filt->short_addr);
+
+		dev_vdbg(dev, "atusb_set_hw_addr_filt called for saddr\n");
+		atusb_write_reg(atusb, RG_SHORT_ADDR_0, addr);
+		atusb_write_reg(atusb, RG_SHORT_ADDR_1, addr >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		u16 pan = le16_to_cpu(filt->pan_id);
+
+		dev_vdbg(dev, "atusb_set_hw_addr_filt called for pan id\n");
+		atusb_write_reg(atusb, RG_PAN_ID_0, pan);
+		atusb_write_reg(atusb, RG_PAN_ID_1, pan >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		u8 i, addr[IEEE802154_EXTENDED_ADDR_LEN];
+
+		memcpy(addr, &filt->ieee_addr, IEEE802154_EXTENDED_ADDR_LEN);
+		dev_vdbg(dev, "atusb_set_hw_addr_filt called for IEEE addr\n");
+		for (i = 0; i < 8; i++)
+			atusb_write_reg(atusb, RG_IEEE_ADDR_0 + i, addr[i]);
+	}
+
+	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+		dev_vdbg(dev,
+			 "atusb_set_hw_addr_filt called for panc change\n");
+		reg = atusb_read_reg(atusb, SR_REG(SR_AACK_I_AM_COORD));
+		if (filt->pan_coord)
+			reg |= SR_VALUE(SR_AACK_I_AM_COORD, 1);
+		else
+			reg &= ~SR_VALUE(SR_AACK_I_AM_COORD, 1);
+		atusb_write_reg(atusb, SR_REG(SR_AACK_I_AM_COORD), reg);
+	}
+
+	return atusb_get_and_clear_error(atusb);
+}
+
+static int atusb_start(struct ieee802154_hw *hw)
+{
+	struct atusb *atusb = hw->priv;
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+
+	dev_dbg(&usb_dev->dev, "atusb_start\n");
+	schedule_delayed_work(&atusb->work, 0);
+	atusb_command(atusb, ATUSB_RX_MODE, 1);
+	ret = atusb_get_and_clear_error(atusb);
+	if (ret < 0)
+		usb_kill_anchored_urbs(&atusb->idle_urbs);
+	return ret;
+}
+
+static void atusb_stop(struct ieee802154_hw *hw)
+{
+	struct atusb *atusb = hw->priv;
+	struct usb_device *usb_dev = atusb->usb_dev;
+
+	dev_dbg(&usb_dev->dev, "atusb_stop\n");
+	usb_kill_anchored_urbs(&atusb->idle_urbs);
+	atusb_command(atusb, ATUSB_RX_MODE, 0);
+	atusb_get_and_clear_error(atusb);
+}
+
+static struct ieee802154_ops atusb_ops = {
+	.owner			= THIS_MODULE,
+	.xmit_async		= atusb_xmit,
+	.ed			= atusb_ed,
+	.set_channel		= atusb_channel,
+	.start			= atusb_start,
+	.stop			= atusb_stop,
+	.set_hw_addr_filt	= atusb_set_hw_addr_filt,
+};
+
+/* ----- Firmware and chip version information ----------------------------- */
+
+static int atusb_get_and_show_revision(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	unsigned char buffer[3];
+	int ret;
+
+	/* Get a couple of the ATMega Firmware values */
+	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
+				ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0,
+				buffer, 3, 1000);
+	if (ret >= 0)
+		dev_info(&usb_dev->dev,
+			 "Firmware: major: %u, minor: %u, hardware type: %u\n",
+			 buffer[0], buffer[1], buffer[2]);
+	if (buffer[0] == 0 && buffer[1] < 2) {
+		dev_info(&usb_dev->dev,
+			 "Firmware version (%u.%u) is predates our first public release.",
+			 buffer[0], buffer[1]);
+		dev_info(&usb_dev->dev, "Please update to version 0.2 or newer");
+	}
+
+	return ret;
+}
+
+static int atusb_get_and_show_build(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	char build[ATUSB_BUILD_SIZE + 1];
+	int ret;
+
+	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
+				ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0,
+				build, ATUSB_BUILD_SIZE, 1000);
+	if (ret >= 0) {
+		build[ret] = 0;
+		dev_info(&usb_dev->dev, "Firmware: build %s\n", build);
+	}
+
+	return ret;
+}
+
+static int atusb_get_and_show_chip(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	uint8_t man_id_0, man_id_1, part_num, version_num;
+
+	man_id_0 = atusb_read_reg(atusb, RG_MAN_ID_0);
+	man_id_1 = atusb_read_reg(atusb, RG_MAN_ID_1);
+	part_num = atusb_read_reg(atusb, RG_PART_NUM);
+	version_num = atusb_read_reg(atusb, RG_VERSION_NUM);
+
+	if (atusb->err)
+		return atusb->err;
+
+	if ((man_id_1 << 8 | man_id_0) != ATUSB_JEDEC_ATMEL) {
+		dev_err(&usb_dev->dev,
+			"non-Atmel transceiver xxxx%02x%02x\n",
+			man_id_1, man_id_0);
+		goto fail;
+	}
+	if (part_num != 3 && part_num != 2) {
+		dev_err(&usb_dev->dev,
+			"unexpected transceiver, part 0x%02x version 0x%02x\n",
+			part_num, version_num);
+		goto fail;
+	}
+
+	dev_info(&usb_dev->dev, "ATUSB: AT86RF231 version %d\n", version_num);
+
+	return 0;
+
+fail:
+	atusb->err = -ENODEV;
+	return -ENODEV;
+}
+
+/* ----- Setup ------------------------------------------------------------- */
+
+static int atusb_probe(struct usb_interface *interface,
+		       const struct usb_device_id *id)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(interface);
+	struct ieee802154_hw *hw;
+	struct atusb *atusb = NULL;
+	int ret = -ENOMEM;
+
+	hw = ieee802154_alloc_hw(sizeof(struct atusb), &atusb_ops);
+	if (!hw)
+		return -ENOMEM;
+
+	atusb = hw->priv;
+	atusb->hw = hw;
+	atusb->usb_dev = usb_get_dev(usb_dev);
+	usb_set_intfdata(interface, atusb);
+
+	atusb->shutdown = 0;
+	atusb->err = 0;
+	INIT_DELAYED_WORK(&atusb->work, atusb_work_urbs);
+	init_usb_anchor(&atusb->idle_urbs);
+	init_usb_anchor(&atusb->rx_urbs);
+
+	if (atusb_alloc_urbs(atusb, ATUSB_NUM_RX_URBS))
+		goto fail;
+
+	atusb->tx_dr.bRequestType = ATUSB_REQ_TO_DEV;
+	atusb->tx_dr.bRequest = ATUSB_TX;
+	atusb->tx_dr.wValue = cpu_to_le16(0);
+
+	atusb->tx_urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!atusb->tx_urb)
+		goto fail;
+
+	hw->parent = &usb_dev->dev;
+	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
+		    IEEE802154_HW_AACK;
+
+	hw->phy->current_page = 0;
+	hw->phy->current_channel = 11;	/* reset default */
+	hw->phy->supported.channels[0] = 0x7FFF800;
+	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
+
+	atusb_command(atusb, ATUSB_RF_RESET, 0);
+	atusb_get_and_show_chip(atusb);
+	atusb_get_and_show_revision(atusb);
+	atusb_get_and_show_build(atusb);
+	ret = atusb_get_and_clear_error(atusb);
+	if (ret) {
+		dev_err(&atusb->usb_dev->dev,
+			"%s: initialization failed, error = %d\n",
+			__func__, ret);
+		goto fail;
+	}
+
+	ret = ieee802154_register_hw(hw);
+	if (ret)
+		goto fail;
+
+	/* If we just powered on, we're now in P_ON and need to enter TRX_OFF
+	 * explicitly. Any resets after that will send us straight to TRX_OFF,
+	 * making the command below redundant.
+	 */
+	atusb_write_reg(atusb, RG_TRX_STATE, STATE_FORCE_TRX_OFF);
+	msleep(1);	/* reset => TRX_OFF, tTR13 = 37 us */
+
+#if 0
+	/* Calculating the maximum time available to empty the frame buffer
+	 * on reception:
+	 *
+	 * According to [1], the inter-frame gap is
+	 * R * 20 * 16 us + 128 us
+	 * where R is a random number from 0 to 7. Furthermore, we have 20 bit
+	 * times (80 us at 250 kbps) of SHR of the next frame before the
+	 * transceiver begins storing data in the frame buffer.
+	 *
+	 * This yields a minimum time of 208 us between the last data of a
+	 * frame and the first data of the next frame. This time is further
+	 * reduced by interrupt latency in the atusb firmware.
+	 *
+	 * atusb currently needs about 500 us to retrieve a maximum-sized
+	 * frame. We therefore have to allow reception of a new frame to begin
+	 * while we retrieve the previous frame.
+	 *
+	 * [1] "JN-AN-1035 Calculating data rates in an IEEE 802.15.4-based
+	 *      network", Jennic 2006.
+	 *     http://www.jennic.com/download_file.php?supportFile=JN-AN-1035%20Calculating%20802-15-4%20Data%20Rates-1v0.pdf
+	 */
+
+	atusb_write_reg(atusb,
+			SR_REG(SR_RX_SAFE_MODE), SR_VALUE(SR_RX_SAFE_MODE, 1));
+#endif
+	atusb_write_reg(atusb, RG_IRQ_MASK, 0xff);
+
+	ret = atusb_get_and_clear_error(atusb);
+	if (!ret)
+		return 0;
+
+	dev_err(&atusb->usb_dev->dev,
+		"%s: setup failed, error = %d\n",
+		__func__, ret);
+
+	ieee802154_unregister_hw(hw);
+fail:
+	atusb_free_urbs(atusb);
+	usb_kill_urb(atusb->tx_urb);
+	usb_free_urb(atusb->tx_urb);
+	usb_put_dev(usb_dev);
+	ieee802154_free_hw(hw);
+	return ret;
+}
+
+static void atusb_disconnect(struct usb_interface *interface)
+{
+	struct atusb *atusb = usb_get_intfdata(interface);
+
+	dev_dbg(&atusb->usb_dev->dev, "atusb_disconnect\n");
+
+	atusb->shutdown = 1;
+	cancel_delayed_work_sync(&atusb->work);
+
+	usb_kill_anchored_urbs(&atusb->rx_urbs);
+	atusb_free_urbs(atusb);
+	usb_kill_urb(atusb->tx_urb);
+	usb_free_urb(atusb->tx_urb);
+
+	ieee802154_unregister_hw(atusb->hw);
+
+	ieee802154_free_hw(atusb->hw);
+
+	usb_set_intfdata(interface, NULL);
+	usb_put_dev(atusb->usb_dev);
+
+	pr_debug("atusb_disconnect done\n");
+}
+
+/* The devices we work with */
+static const struct usb_device_id atusb_device_table[] = {
+	{
+		.match_flags		= USB_DEVICE_ID_MATCH_DEVICE |
+					  USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor		= ATUSB_VENDOR_ID,
+		.idProduct		= ATUSB_PRODUCT_ID,
+		.bInterfaceClass	= USB_CLASS_VENDOR_SPEC
+	},
+	/* end with null element */
+	{}
+};
+MODULE_DEVICE_TABLE(usb, atusb_device_table);
+
+static struct usb_driver atusb_driver = {
+	.name		= "atusb",
+	.probe		= atusb_probe,
+	.disconnect	= atusb_disconnect,
+	.id_table	= atusb_device_table,
+};
+module_usb_driver(atusb_driver);
+
+MODULE_AUTHOR("Alexander Aring <alex.aring@gmail.com>");
+MODULE_AUTHOR("Richard Sharpe <realrichardsharpe@gmail.com>");
+MODULE_AUTHOR("Stefan Schmidt <stefan@datenfreihafen.org>");
+MODULE_AUTHOR("Werner Almesberger <werner@almesberger.net>");
+MODULE_DESCRIPTION("ATUSB IEEE 802.15.4 Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ieee802154/atusb.h b/drivers/net/ieee802154/atusb.h
new file mode 100644
index 000000000000..0690edcad57b
--- /dev/null
+++ b/drivers/net/ieee802154/atusb.h
@@ -0,0 +1,84 @@
+/*
+ * atusb.h - Definitions shared between kernel and ATUSB firmware
+ *
+ * Written 2013 by Werner Almesberger <werner@almesberger.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2, or
+ * (at your option) any later version.
+ *
+ * This file should be identical for kernel and firmware.
+ * Kernel: drivers/net/ieee802154/atusb.h
+ * Firmware: ben-wpan/atusb/fw/include/atusb/atusb.h
+ */
+
+#ifndef _ATUSB_H
+#define _ATUSB_H
+
+#define ATUSB_VENDOR_ID	0x20b7	/* Qi Hardware*/
+#define ATUSB_PRODUCT_ID 0x1540	/* 802.15.4, device 0 */
+				/*     -- -         - */
+
+#define ATUSB_BUILD_SIZE 256	/* maximum build version/date message length */
+
+/* Commands to our device. Make sure this is synced with the firmware */
+enum atusb_requests {
+	ATUSB_ID			= 0x00,	/* system status/control grp */
+	ATUSB_BUILD,
+	ATUSB_RESET,
+	ATUSB_RF_RESET			= 0x10,	/* debug/test group */
+	ATUSB_POLL_INT,
+	ATUSB_TEST,			/* atusb-sil only */
+	ATUSB_TIMER,
+	ATUSB_GPIO,
+	ATUSB_SLP_TR,
+	ATUSB_GPIO_CLEANUP,
+	ATUSB_REG_WRITE			= 0x20,	/* transceiver group */
+	ATUSB_REG_READ,
+	ATUSB_BUF_WRITE,
+	ATUSB_BUF_READ,
+	ATUSB_SRAM_WRITE,
+	ATUSB_SRAM_READ,
+	ATUSB_SPI_WRITE			= 0x30,	/* SPI group */
+	ATUSB_SPI_READ1,
+	ATUSB_SPI_READ2,
+	ATUSB_SPI_WRITE2_SYNC,
+	ATUSB_RX_MODE			= 0x40, /* HardMAC group */
+	ATUSB_TX,
+};
+
+/* Direction	bRequest		wValue		wIndex	wLength
+ *
+ * ->host	ATUSB_ID		-		-	3
+ * ->host	ATUSB_BUILD		-		-	#bytes
+ * host->	ATUSB_RESET		-		-	0
+ *
+ * host->	ATUSB_RF_RESET		-		-	0
+ * ->host	ATUSB_POLL_INT		-		-	1
+ * host->	ATUSB_TEST		-		-	0
+ * ->host	ATUSB_TIMER		-		-	#bytes (6)
+ * ->host	ATUSB_GPIO		dir+data	mask+p#	3
+ * host->	ATUSB_SLP_TR		-		-	0
+ * host->	ATUSB_GPIO_CLEANUP	-		-	0
+ *
+ * host->	ATUSB_REG_WRITE		value		addr	0
+ * ->host	ATUSB_REG_READ		-		addr	1
+ * host->	ATUSB_BUF_WRITE		-		-	#bytes
+ * ->host	ATUSB_BUF_READ		-		-	#bytes
+ * host->	ATUSB_SRAM_WRITE	-		addr	#bytes
+ * ->host	ATUSB_SRAM_READ		-		addr	#bytes
+ *
+ * host->	ATUSB_SPI_WRITE		byte0		byte1	#bytes
+ * ->host	ATUSB_SPI_READ1		byte0		-	#bytes
+ * ->host	ATUSB_SPI_READ2		byte0		byte1	#bytes
+ * ->host	ATUSB_SPI_WRITE2_SYNC	byte0		byte1	0/1
+ *
+ * host->	ATUSB_RX_MODE		on		-	0
+ * host->	ATUSB_TX		flags		ack_seq	#bytes
+ */
+
+#define ATUSB_REQ_FROM_DEV	(USB_TYPE_VENDOR | USB_DIR_IN)
+#define ATUSB_REQ_TO_DEV	(USB_TYPE_VENDOR | USB_DIR_OUT)
+
+#endif /* !_ATUSB_H */
diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
index f833b8bb6663..84b28a05c5a1 100644
--- a/drivers/net/ieee802154/cc2520.c
+++ b/drivers/net/ieee802154/cc2520.c
@@ -653,7 +653,7 @@ static int cc2520_register(struct cc2520_private *priv)
 	ieee802154_random_extended_addr(&priv->hw->phy->perm_extended_addr);
 
 	/* We do support only 2.4 Ghz */
-	priv->hw->phy->channels_supported[0] = 0x7FFF800;
+	priv->hw->phy->supported.channels[0] = 0x7FFF800;
 	priv->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
 			  IEEE802154_HW_AFILT;
 
diff --git a/drivers/net/ieee802154/fakelb.c b/drivers/net/ieee802154/fakelb.c
index dc2bfb600b4b..9d0da4ec3e8c 100644
--- a/drivers/net/ieee802154/fakelb.c
+++ b/drivers/net/ieee802154/fakelb.c
@@ -27,25 +27,25 @@
 #include <net/mac802154.h>
 #include <net/cfg802154.h>
 
-static int numlbs = 1;
+static int numlbs = 2;
 
-struct fakelb_dev_priv {
-	struct ieee802154_hw *hw;
+static LIST_HEAD(fakelb_phys);
+static DEFINE_SPINLOCK(fakelb_phys_lock);
 
-	struct list_head list;
-	struct fakelb_priv *fake;
+static LIST_HEAD(fakelb_ifup_phys);
+static DEFINE_RWLOCK(fakelb_ifup_phys_lock);
 
-	spinlock_t lock;
-	bool working;
-};
+struct fakelb_phy {
+	struct ieee802154_hw *hw;
+
+	u8 page;
+	u8 channel;
 
-struct fakelb_priv {
 	struct list_head list;
-	rwlock_t lock;
+	struct list_head list_ifup;
 };
 
-static int
-fakelb_hw_ed(struct ieee802154_hw *hw, u8 *level)
+static int fakelb_hw_ed(struct ieee802154_hw *hw, u8 *level)
 {
 	BUG_ON(!level);
 	*level = 0xbe;
@@ -53,78 +53,63 @@ fakelb_hw_ed(struct ieee802154_hw *hw, u8 *level)
 	return 0;
 }
 
-static int
-fakelb_hw_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+static int fakelb_hw_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
 {
-	pr_debug("set channel to %d\n", channel);
+	struct fakelb_phy *phy = hw->priv;
 
+	write_lock_bh(&fakelb_ifup_phys_lock);
+	phy->page = page;
+	phy->channel = channel;
+	write_unlock_bh(&fakelb_ifup_phys_lock);
 	return 0;
 }
 
-static void
-fakelb_hw_deliver(struct fakelb_dev_priv *priv, struct sk_buff *skb)
+static int fakelb_hw_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
 {
-	struct sk_buff *newskb;
+	struct fakelb_phy *current_phy = hw->priv, *phy;
 
-	spin_lock(&priv->lock);
-	if (priv->working) {
-		newskb = pskb_copy(skb, GFP_ATOMIC);
-		ieee802154_rx_irqsafe(priv->hw, newskb, 0xcc);
-	}
-	spin_unlock(&priv->lock);
-}
+	read_lock_bh(&fakelb_ifup_phys_lock);
+	list_for_each_entry(phy, &fakelb_ifup_phys, list_ifup) {
+		if (current_phy == phy)
+			continue;
 
-static int
-fakelb_hw_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
-{
-	struct fakelb_dev_priv *priv = hw->priv;
-	struct fakelb_priv *fake = priv->fake;
-
-	read_lock_bh(&fake->lock);
-	if (priv->list.next == priv->list.prev) {
-		/* we are the only one device */
-		fakelb_hw_deliver(priv, skb);
-	} else {
-		struct fakelb_dev_priv *dp;
-		list_for_each_entry(dp, &priv->fake->list, list) {
-			if (dp != priv &&
-			    (dp->hw->phy->current_channel ==
-			     priv->hw->phy->current_channel))
-				fakelb_hw_deliver(dp, skb);
+		if (current_phy->page == phy->page &&
+		    current_phy->channel == phy->channel) {
+			struct sk_buff *newskb = pskb_copy(skb, GFP_ATOMIC);
+
+			if (newskb)
+				ieee802154_rx_irqsafe(phy->hw, newskb, 0xcc);
 		}
 	}
-	read_unlock_bh(&fake->lock);
+	read_unlock_bh(&fakelb_ifup_phys_lock);
 
+	ieee802154_xmit_complete(hw, skb, false);
 	return 0;
 }
 
-static int
-fakelb_hw_start(struct ieee802154_hw *hw) {
-	struct fakelb_dev_priv *priv = hw->priv;
-	int ret = 0;
+static int fakelb_hw_start(struct ieee802154_hw *hw)
+{
+	struct fakelb_phy *phy = hw->priv;
 
-	spin_lock(&priv->lock);
-	if (priv->working)
-		ret = -EBUSY;
-	else
-		priv->working = 1;
-	spin_unlock(&priv->lock);
+	write_lock_bh(&fakelb_ifup_phys_lock);
+	list_add(&phy->list_ifup, &fakelb_ifup_phys);
+	write_unlock_bh(&fakelb_ifup_phys_lock);
 
-	return ret;
+	return 0;
 }
 
-static void
-fakelb_hw_stop(struct ieee802154_hw *hw) {
-	struct fakelb_dev_priv *priv = hw->priv;
+static void fakelb_hw_stop(struct ieee802154_hw *hw)
+{
+	struct fakelb_phy *phy = hw->priv;
 
-	spin_lock(&priv->lock);
-	priv->working = 0;
-	spin_unlock(&priv->lock);
+	write_lock_bh(&fakelb_ifup_phys_lock);
+	list_del(&phy->list_ifup);
+	write_unlock_bh(&fakelb_ifup_phys_lock);
 }
 
 static const struct ieee802154_ops fakelb_ops = {
 	.owner = THIS_MODULE,
-	.xmit_sync = fakelb_hw_xmit,
+	.xmit_async = fakelb_hw_xmit,
 	.ed = fakelb_hw_ed,
 	.set_channel = fakelb_hw_channel,
 	.start = fakelb_hw_start,
@@ -135,54 +120,54 @@ static const struct ieee802154_ops fakelb_ops = {
 module_param(numlbs, int, 0);
 MODULE_PARM_DESC(numlbs, " number of pseudo devices");
 
-static int fakelb_add_one(struct device *dev, struct fakelb_priv *fake)
+static int fakelb_add_one(struct device *dev)
 {
-	struct fakelb_dev_priv *priv;
-	int err;
 	struct ieee802154_hw *hw;
+	struct fakelb_phy *phy;
+	int err;
 
-	hw = ieee802154_alloc_hw(sizeof(*priv), &fakelb_ops);
+	hw = ieee802154_alloc_hw(sizeof(*phy), &fakelb_ops);
 	if (!hw)
 		return -ENOMEM;
 
-	priv = hw->priv;
-	priv->hw = hw;
+	phy = hw->priv;
+	phy->hw = hw;
 
 	/* 868 MHz BPSK	802.15.4-2003 */
-	hw->phy->channels_supported[0] |= 1;
+	hw->phy->supported.channels[0] |= 1;
 	/* 915 MHz BPSK	802.15.4-2003 */
-	hw->phy->channels_supported[0] |= 0x7fe;
+	hw->phy->supported.channels[0] |= 0x7fe;
 	/* 2.4 GHz O-QPSK 802.15.4-2003 */
-	hw->phy->channels_supported[0] |= 0x7FFF800;
+	hw->phy->supported.channels[0] |= 0x7FFF800;
 	/* 868 MHz ASK 802.15.4-2006 */
-	hw->phy->channels_supported[1] |= 1;
+	hw->phy->supported.channels[1] |= 1;
 	/* 915 MHz ASK 802.15.4-2006 */
-	hw->phy->channels_supported[1] |= 0x7fe;
+	hw->phy->supported.channels[1] |= 0x7fe;
 	/* 868 MHz O-QPSK 802.15.4-2006 */
-	hw->phy->channels_supported[2] |= 1;
+	hw->phy->supported.channels[2] |= 1;
 	/* 915 MHz O-QPSK 802.15.4-2006 */
-	hw->phy->channels_supported[2] |= 0x7fe;
+	hw->phy->supported.channels[2] |= 0x7fe;
 	/* 2.4 GHz CSS 802.15.4a-2007 */
-	hw->phy->channels_supported[3] |= 0x3fff;
+	hw->phy->supported.channels[3] |= 0x3fff;
 	/* UWB Sub-gigahertz 802.15.4a-2007 */
-	hw->phy->channels_supported[4] |= 1;
+	hw->phy->supported.channels[4] |= 1;
 	/* UWB Low band 802.15.4a-2007 */
-	hw->phy->channels_supported[4] |= 0x1e;
+	hw->phy->supported.channels[4] |= 0x1e;
 	/* UWB High band 802.15.4a-2007 */
-	hw->phy->channels_supported[4] |= 0xffe0;
+	hw->phy->supported.channels[4] |= 0xffe0;
 	/* 750 MHz O-QPSK 802.15.4c-2009 */
-	hw->phy->channels_supported[5] |= 0xf;
+	hw->phy->supported.channels[5] |= 0xf;
 	/* 750 MHz MPSK 802.15.4c-2009 */
-	hw->phy->channels_supported[5] |= 0xf0;
+	hw->phy->supported.channels[5] |= 0xf0;
 	/* 950 MHz BPSK 802.15.4d-2009 */
-	hw->phy->channels_supported[6] |= 0x3ff;
+	hw->phy->supported.channels[6] |= 0x3ff;
 	/* 950 MHz GFSK 802.15.4d-2009 */
-	hw->phy->channels_supported[6] |= 0x3ffc00;
+	hw->phy->supported.channels[6] |= 0x3ffc00;
 
-	INIT_LIST_HEAD(&priv->list);
-	priv->fake = fake;
-
-	spin_lock_init(&priv->lock);
+	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
+	/* fake phy channel 13 as default */
+	hw->phy->current_channel = 13;
+	phy->channel = hw->phy->current_channel;
 
 	hw->parent = dev;
 
@@ -190,67 +175,55 @@ static int fakelb_add_one(struct device *dev, struct fakelb_priv *fake)
 	if (err)
 		goto err_reg;
 
-	write_lock_bh(&fake->lock);
-	list_add_tail(&priv->list, &fake->list);
-	write_unlock_bh(&fake->lock);
+	spin_lock(&fakelb_phys_lock);
+	list_add_tail(&phy->list, &fakelb_phys);
+	spin_unlock(&fakelb_phys_lock);
 
 	return 0;
 
 err_reg:
-	ieee802154_free_hw(priv->hw);
+	ieee802154_free_hw(phy->hw);
 	return err;
 }
 
-static void fakelb_del(struct fakelb_dev_priv *priv)
+static void fakelb_del(struct fakelb_phy *phy)
 {
-	write_lock_bh(&priv->fake->lock);
-	list_del(&priv->list);
-	write_unlock_bh(&priv->fake->lock);
+	list_del(&phy->list);
 
-	ieee802154_unregister_hw(priv->hw);
-	ieee802154_free_hw(priv->hw);
+	ieee802154_unregister_hw(phy->hw);
+	ieee802154_free_hw(phy->hw);
 }
 
 static int fakelb_probe(struct platform_device *pdev)
 {
-	struct fakelb_priv *priv;
-	struct fakelb_dev_priv *dp;
-	int err = -ENOMEM;
-	int i;
-
-	priv = devm_kzalloc(&pdev->dev, sizeof(struct fakelb_priv),
-			    GFP_KERNEL);
-	if (!priv)
-		goto err_alloc;
-
-	INIT_LIST_HEAD(&priv->list);
-	rwlock_init(&priv->lock);
+	struct fakelb_phy *phy, *tmp;
+	int err, i;
 
 	for (i = 0; i < numlbs; i++) {
-		err = fakelb_add_one(&pdev->dev, priv);
+		err = fakelb_add_one(&pdev->dev);
 		if (err < 0)
 			goto err_slave;
 	}
 
-	platform_set_drvdata(pdev, priv);
 	dev_info(&pdev->dev, "added ieee802154 hardware\n");
 	return 0;
 
 err_slave:
-	list_for_each_entry(dp, &priv->list, list)
-		fakelb_del(dp);
-err_alloc:
+	spin_lock(&fakelb_phys_lock);
+	list_for_each_entry_safe(phy, tmp, &fakelb_phys, list)
+		fakelb_del(phy);
+	spin_unlock(&fakelb_phys_lock);
 	return err;
 }
 
 static int fakelb_remove(struct platform_device *pdev)
 {
-	struct fakelb_priv *priv = platform_get_drvdata(pdev);
-	struct fakelb_dev_priv *dp, *temp;
-
-	list_for_each_entry_safe(dp, temp, &priv->list, list)
-		fakelb_del(dp);
+	struct fakelb_phy *phy, *tmp;
 
+	spin_lock(&fakelb_phys_lock);
+	list_for_each_entry_safe(phy, tmp, &fakelb_phys, list)
+		fakelb_del(phy);
+	spin_unlock(&fakelb_phys_lock);
 	return 0;
 }
 
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index fba2dfd910f7..f2a1bd122a74 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -750,7 +750,7 @@ static int mrf24j40_probe(struct spi_device *spi)
 
 	devrec->hw->priv = devrec;
 	devrec->hw->parent = &devrec->spi->dev;
-	devrec->hw->phy->channels_supported[0] = CHANNEL_MASK;
+	devrec->hw->phy->supported.channels[0] = CHANNEL_MASK;
 	devrec->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
 			    IEEE802154_HW_AFILT;