Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform

Enable initial ARM multi-platform support for highbank, mvebu,
socfpga, picoxcell, and vexpress.

Multi-platform support is dependent on mach/gpio.h removal and
restructuring of DEBUG_LL and dtb build rules included in this branch.

This has been built for all defconfigs, and booted on highbank with
all 5 platforms enabled.

By Rob Herring (18) and Arnd Bergmann (1)
via Rob Herring
* tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux:
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ARM: orion: move custom gpio functions to orion-gpio.h
  ARM: shmobile: move custom gpio functions to sh-gpio.h
  ARM: pxa: use gpio_to_irq for sharppm_sl
  net: pxaficp_ir: add irq resources
  usb: pxa27x_udc: remove IRQ_USB define
  staging: ste_rmi4: remove gpio.h include

Conflicts due to addition of bcm2835 and removal of pnx4008 in:
	arch/arm/Kconfig
	arch/arm/Makefile

Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in:
	arch/arm/mach-imx/Makefile.boot
	arch/arm/mach-mxs/Makefile.boot
	arch/arm/mach-tegra/Makefile.boot

Signed-off-by: Olof Johansson <olof@lixom.net>

4 files changed, 19 insertions, 13 deletions

diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 8d5476707912..cb0a5d3c0b64 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -29,8 +29,8 @@
 
 #include <mach/dma.h>
 #include <mach/irda.h>
-#include <mach/regs-uart.h>
 #include <mach/regs-ost.h>
+#include <mach/regs-uart.h>
 
 #define FICP		__REG(0x40800000)  /* Start of FICP area */
 #define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
@@ -112,6 +112,9 @@ struct pxa_irda {
 	int			txdma;
 	int			rxdma;
 
+	int			uart_irq;
+	int			icp_irq;
+
 	struct irlap_cb		*irlap;
 	struct qos_info		qos;
 
@@ -672,19 +675,19 @@ static int pxa_irda_start(struct net_device *dev)
 
 	si->speed = 9600;
 
-	err = request_irq(IRQ_STUART, pxa_irda_sir_irq, 0, dev->name, dev);
+	err = request_irq(si->uart_irq, pxa_irda_sir_irq, 0, dev->name, dev);
 	if (err)
 		goto err_irq1;
 
-	err = request_irq(IRQ_ICP, pxa_irda_fir_irq, 0, dev->name, dev);
+	err = request_irq(si->icp_irq, pxa_irda_fir_irq, 0, dev->name, dev);
 	if (err)
 		goto err_irq2;
 
 	/*
 	 * The interrupt must remain disabled for now.
 	 */
-	disable_irq(IRQ_STUART);
-	disable_irq(IRQ_ICP);
+	disable_irq(si->uart_irq);
+	disable_irq(si->icp_irq);
 
 	err = -EBUSY;
 	si->rxdma = pxa_request_dma("FICP_RX",DMA_PRIO_LOW, pxa_irda_fir_dma_rx_irq, dev);
@@ -720,8 +723,8 @@ static int pxa_irda_start(struct net_device *dev)
 	/*
 	 * Now enable the interrupt and start the queue
 	 */
-	enable_irq(IRQ_STUART);
-	enable_irq(IRQ_ICP);
+	enable_irq(si->uart_irq);
+	enable_irq(si->icp_irq);
 	netif_start_queue(dev);
 
 	printk(KERN_DEBUG "pxa_ir: irda driver opened\n");
@@ -738,9 +741,9 @@ err_dma_rx_buff:
 err_tx_dma:
 	pxa_free_dma(si->rxdma);
 err_rx_dma:
-	free_irq(IRQ_ICP, dev);
+	free_irq(si->icp_irq, dev);
 err_irq2:
-	free_irq(IRQ_STUART, dev);
+	free_irq(si->uart_irq, dev);
 err_irq1:
 
 	return err;
@@ -760,8 +763,8 @@ static int pxa_irda_stop(struct net_device *dev)
 		si->irlap = NULL;
 	}
 
-	free_irq(IRQ_STUART, dev);
-	free_irq(IRQ_ICP, dev);
+	free_irq(si->uart_irq, dev);
+	free_irq(si->icp_irq, dev);
 
 	pxa_free_dma(si->rxdma);
 	pxa_free_dma(si->txdma);
@@ -851,6 +854,9 @@ static int pxa_irda_probe(struct platform_device *pdev)
 	si->dev = &pdev->dev;
 	si->pdata = pdev->dev.platform_data;
 
+	si->uart_irq = platform_get_irq(pdev, 0);
+	si->icp_irq = platform_get_irq(pdev, 1);
+
 	si->sir_clk = clk_get(&pdev->dev, "UARTCLK");
 	si->fir_clk = clk_get(&pdev->dev, "FICPCLK");
 	if (IS_ERR(si->sir_clk) || IS_ERR(si->fir_clk)) {
diff --git a/drivers/sh/pfc/gpio.c b/drivers/sh/pfc/gpio.c
index 62bca98474a9..038fa071382a 100644
--- a/drivers/sh/pfc/gpio.c
+++ b/drivers/sh/pfc/gpio.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/sh_pfc.h>
 
 struct sh_pfc_chip {
 	struct sh_pfc		*pfc;
diff --git a/drivers/staging/ste_rmi4/board-mop500-u8500uib-rmi4.c b/drivers/staging/ste_rmi4/board-mop500-u8500uib-rmi4.c
index a272e488e5b9..47439c3f7258 100644
--- a/drivers/staging/ste_rmi4/board-mop500-u8500uib-rmi4.c
+++ b/drivers/staging/ste_rmi4/board-mop500-u8500uib-rmi4.c
@@ -5,7 +5,6 @@
 #include <linux/i2c.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 #include "synaptics_i2c_rmi4.h"
 
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 644b4305cb99..7a8713cda945 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -2508,7 +2508,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 			IRQF_SHARED, driver_name, udc);
 	if (retval != 0) {
 		dev_err(udc->dev, "%s: can't get irq %i, err %d\n",
-			driver_name, IRQ_USB, retval);
+			driver_name, udc->irq, retval);
 		goto err_irq;
 	}
 	retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);