Merge tag 'acpi-4.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "Rework the handling of the P-unit semaphore on Intel Baytrail and
  Cherrytrail systems to avoid race conditions and excessive overhead
  related to it (Hans de Goede)"

* tag 'acpi-4.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PMIC: xpower: Add depends on IOSF_MBI to Kconfig entry
  i2c: designware: Cleanup bus lock handling
  ACPI / PMIC: xpower: Block P-Unit I2C access during read-modify-write
  x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code

6 files changed, 22 insertions, 155 deletions

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 365e6c1a729e..8f3a444c6ea9 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -512,7 +512,7 @@ config CRC_PMIC_OPREGION
 
 config XPOWER_PMIC_OPREGION
 	bool "ACPI operation region support for XPower AXP288 PMIC"
-	depends on MFD_AXP20X_I2C
+	depends on MFD_AXP20X_I2C && IOSF_MBI
 	help
 	  This config adds ACPI operation region support for XPower AXP288 PMIC.
 
diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c
index aadc86db804c..2579675b7082 100644
--- a/drivers/acpi/pmic/intel_pmic_xpower.c
+++ b/drivers/acpi/pmic/intel_pmic_xpower.c
@@ -8,8 +8,9 @@
 #include <linux/acpi.h>
 #include <linux/init.h>
 #include <linux/mfd/axp20x.h>
-#include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <asm/iosf_mbi.h>
 #include "intel_pmic.h"
 
 #define XPOWER_GPADC_LOW	0x5b
@@ -172,15 +173,21 @@ static int intel_xpower_pmic_get_power(struct regmap *regmap, int reg,
 static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg,
 					  int bit, bool on)
 {
-	int data;
+	int data, ret;
 
 	/* GPIO1 LDO regulator needs special handling */
 	if (reg == XPOWER_GPI1_CTRL)
 		return regmap_update_bits(regmap, reg, GPI1_LDO_MASK,
 					  on ? GPI1_LDO_ON : GPI1_LDO_OFF);
 
-	if (regmap_read(regmap, reg, &data))
-		return -EIO;
+	ret = iosf_mbi_block_punit_i2c_access();
+	if (ret)
+		return ret;
+
+	if (regmap_read(regmap, reg, &data)) {
+		ret = -EIO;
+		goto out;
+	}
 
 	if (on)
 		data |= BIT(bit);
@@ -188,9 +195,11 @@ static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg,
 		data &= ~BIT(bit);
 
 	if (regmap_write(regmap, reg, data))
-		return -EIO;
+		ret = -EIO;
+out:
+	iosf_mbi_unblock_punit_i2c_access();
 
-	return 0;
+	return ret;
 }
 
 /**
diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c
index 9ca1feaba98f..33da07d64494 100644
--- a/drivers/i2c/busses/i2c-designware-baytrail.c
+++ b/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -3,141 +3,15 @@
  * Intel BayTrail PMIC I2C bus semaphore implementaion
  * Copyright (c) 2014, Intel Corporation.
  */
-#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/acpi.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
-#include <linux/pm_qos.h>
 
 #include <asm/iosf_mbi.h>
 
 #include "i2c-designware-core.h"
 
-#define SEMAPHORE_TIMEOUT	500
-#define PUNIT_SEMAPHORE		0x7
-#define PUNIT_SEMAPHORE_CHT	0x10e
-#define PUNIT_SEMAPHORE_BIT	BIT(0)
-#define PUNIT_SEMAPHORE_ACQUIRE	BIT(1)
-
-static unsigned long acquired;
-
-static u32 get_sem_addr(struct dw_i2c_dev *dev)
-{
-	if (dev->flags & MODEL_CHERRYTRAIL)
-		return PUNIT_SEMAPHORE_CHT;
-	else
-		return PUNIT_SEMAPHORE;
-}
-
-static int get_sem(struct dw_i2c_dev *dev, u32 *sem)
-{
-	u32 addr = get_sem_addr(dev);
-	u32 data;
-	int ret;
-
-	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, addr, &data);
-	if (ret) {
-		dev_err(dev->dev, "iosf failed to read punit semaphore\n");
-		return ret;
-	}
-
-	*sem = data & PUNIT_SEMAPHORE_BIT;
-
-	return 0;
-}
-
-static void reset_semaphore(struct dw_i2c_dev *dev)
-{
-	if (iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, get_sem_addr(dev),
-			    0, PUNIT_SEMAPHORE_BIT))
-		dev_err(dev->dev, "iosf failed to reset punit semaphore during write\n");
-
-	pm_qos_update_request(&dev->pm_qos, PM_QOS_DEFAULT_VALUE);
-
-	iosf_mbi_call_pmic_bus_access_notifier_chain(MBI_PMIC_BUS_ACCESS_END,
-						     NULL);
-	iosf_mbi_punit_release();
-}
-
-static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
-{
-	u32 addr;
-	u32 sem = PUNIT_SEMAPHORE_ACQUIRE;
-	int ret;
-	unsigned long start, end;
-
-	might_sleep();
-
-	if (!dev || !dev->dev)
-		return -ENODEV;
-
-	if (!dev->release_lock)
-		return 0;
-
-	iosf_mbi_punit_acquire();
-	iosf_mbi_call_pmic_bus_access_notifier_chain(MBI_PMIC_BUS_ACCESS_BEGIN,
-						     NULL);
-
-	/*
-	 * Disallow the CPU to enter C6 or C7 state, entering these states
-	 * requires the punit to talk to the pmic and if this happens while
-	 * we're holding the semaphore, the SoC hangs.
-	 */
-	pm_qos_update_request(&dev->pm_qos, 0);
-
-	addr = get_sem_addr(dev);
-
-	/* host driver writes to side band semaphore register */
-	ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, addr, sem);
-	if (ret) {
-		dev_err(dev->dev, "iosf punit semaphore request failed\n");
-		goto out;
-	}
-
-	/* host driver waits for bit 0 to be set in semaphore register */
-	start = jiffies;
-	end = start + msecs_to_jiffies(SEMAPHORE_TIMEOUT);
-	do {
-		ret = get_sem(dev, &sem);
-		if (!ret && sem) {
-			acquired = jiffies;
-			dev_dbg(dev->dev, "punit semaphore acquired after %ums\n",
-				jiffies_to_msecs(jiffies - start));
-			return 0;
-		}
-
-		usleep_range(1000, 2000);
-	} while (time_before(jiffies, end));
-
-	dev_err(dev->dev, "punit semaphore timed out, resetting\n");
-out:
-	reset_semaphore(dev);
-
-	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, addr, &sem);
-	if (ret)
-		dev_err(dev->dev, "iosf failed to read punit semaphore\n");
-	else
-		dev_err(dev->dev, "PUNIT SEM: %d\n", sem);
-
-	WARN_ON(1);
-
-	return -ETIMEDOUT;
-}
-
-static void baytrail_i2c_release(struct dw_i2c_dev *dev)
-{
-	if (!dev || !dev->dev)
-		return;
-
-	if (!dev->acquire_lock)
-		return;
-
-	reset_semaphore(dev);
-	dev_dbg(dev->dev, "punit semaphore held for %ums\n",
-		jiffies_to_msecs(jiffies - acquired));
-}
-
 int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 {
 	acpi_status status;
@@ -162,18 +36,9 @@ int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 		return -EPROBE_DEFER;
 
 	dev_info(dev->dev, "I2C bus managed by PUNIT\n");
-	dev->acquire_lock = baytrail_i2c_acquire;
-	dev->release_lock = baytrail_i2c_release;
+	dev->acquire_lock = iosf_mbi_block_punit_i2c_access;
+	dev->release_lock = iosf_mbi_unblock_punit_i2c_access;
 	dev->shared_with_punit = true;
 
-	pm_qos_add_request(&dev->pm_qos, PM_QOS_CPU_DMA_LATENCY,
-			   PM_QOS_DEFAULT_VALUE);
-
 	return 0;
 }
-
-void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
-{
-	if (dev->acquire_lock)
-		pm_qos_remove_request(&dev->pm_qos);
-}
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 36271cd75342..a4730111d290 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -269,7 +269,7 @@ int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
 	if (!dev->acquire_lock)
 		return 0;
 
-	ret = dev->acquire_lock(dev);
+	ret = dev->acquire_lock();
 	if (!ret)
 		return 0;
 
@@ -281,7 +281,7 @@ int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
 void i2c_dw_release_lock(struct dw_i2c_dev *dev)
 {
 	if (dev->release_lock)
-		dev->release_lock(dev);
+		dev->release_lock();
 }
 
 /*
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 9ec8394f4787..b4a0b2b99a78 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -10,7 +10,6 @@
  */
 
 #include <linux/i2c.h>
-#include <linux/pm_qos.h>
 
 #define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C |			\
 					I2C_FUNC_SMBUS_BYTE |		\
@@ -209,7 +208,6 @@
  * @fp_lcnt: fast plus LCNT value
  * @hs_hcnt: high speed HCNT value
  * @hs_lcnt: high speed LCNT value
- * @pm_qos: pm_qos_request used while holding a hardware lock on the bus
  * @acquire_lock: function to acquire a hardware lock on the bus
  * @release_lock: function to release a hardware lock on the bus
  * @shared_with_punit: true if this bus is shared with the SoCs PUNIT
@@ -263,9 +261,8 @@ struct dw_i2c_dev {
 	u16			fp_lcnt;
 	u16			hs_hcnt;
 	u16			hs_lcnt;
-	struct pm_qos_request	pm_qos;
-	int			(*acquire_lock)(struct dw_i2c_dev *dev);
-	void			(*release_lock)(struct dw_i2c_dev *dev);
+	int			(*acquire_lock)(void);
+	void			(*release_lock)(void);
 	bool			shared_with_punit;
 	void			(*disable)(struct dw_i2c_dev *dev);
 	void			(*disable_int)(struct dw_i2c_dev *dev);
@@ -322,8 +319,6 @@ static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; }
 
 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
 extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev);
-extern void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev);
 #else
 static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; }
-static inline void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev) {}
 #endif
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 997bbb3d925f..9eaac3be1f63 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -418,8 +418,6 @@ static int dw_i2c_plat_remove(struct platform_device *pdev)
 	if (!IS_ERR_OR_NULL(dev->rst))
 		reset_control_assert(dev->rst);
 
-	i2c_dw_remove_lock_support(dev);
-
 	return 0;
 }