Merge tag 'arm-soc/for-4.13/drivers' of http://github.com/Broadcom/stblinux into next/drivers

This pull request contains Broadcom ARM/ARM64 SoCs specific driver changes for
4.13, please pull the following:

- Doug adds support for the latest generation GISB bus arbiter (v7), he starts by
  fixing two issues in how registers are written, and how 64-bit addresses are captured
  and then he simplifies the error interception by using notifiers, which allows him
  to add support for ARM64

- Markus updates the SOC_BRCMSTB Kconfig depends to cover ARM64 and BMIPS_GENERIC
  systems where this code is now also used

* tag 'arm-soc/for-4.13/drivers' of http://github.com/Broadcom/stblinux:
  soc: brcmstb: enable drivers for ARM64 and BMIPS
  bus: brcmstb_gisb: update to support new revision
  bus: brcmstb_gisb: enable driver for ARM64 architecture
  bus: brcmstb_gisb: remove low-level ARM hooks
  bus: brcmstb_gisb: add notifier handling
  bus: brcmstb_gisb: correct support for 64-bit address output
  bus: brcmstb_gisb: Use register offsets with writes too

Signed-off-by: Olof Johansson <olof@lixom.net>

3 files changed, 74 insertions, 51 deletions

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 0a52da439abf..d2a5f1184022 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -57,7 +57,7 @@ config ARM_CCN
 
 config BRCMSTB_GISB_ARB
 	bool "Broadcom STB GISB bus arbiter"
-	depends on ARM || MIPS
+	depends on ARM || ARM64 || MIPS
 	default ARCH_BRCMSTB || BMIPS_GENERIC
 	help
 	  Driver for the Broadcom Set Top Box System-on-a-chip internal bus
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index 72fe0a5a8bf3..68ac3e93b600 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2014 Broadcom Corporation
+ * Copyright (C) 2014-2017 Broadcom
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -24,11 +24,9 @@
 #include <linux/of.h>
 #include <linux/bitops.h>
 #include <linux/pm.h>
-
-#ifdef CONFIG_ARM
-#include <asm/bug.h>
-#include <asm/signal.h>
-#endif
+#include <linux/kernel.h>
+#include <linux/kdebug.h>
+#include <linux/notifier.h>
 
 #ifdef CONFIG_MIPS
 #include <asm/traps.h>
@@ -37,8 +35,6 @@
 #define  ARB_ERR_CAP_CLEAR		(1 << 0)
 #define  ARB_ERR_CAP_STATUS_TIMEOUT	(1 << 12)
 #define  ARB_ERR_CAP_STATUS_TEA		(1 << 11)
-#define  ARB_ERR_CAP_STATUS_BS_SHIFT	(1 << 2)
-#define  ARB_ERR_CAP_STATUS_BS_MASK	0x3c
 #define  ARB_ERR_CAP_STATUS_WRITE	(1 << 1)
 #define  ARB_ERR_CAP_STATUS_VALID	(1 << 0)
 
@@ -47,7 +43,6 @@ enum {
 	ARB_ERR_CAP_CLR,
 	ARB_ERR_CAP_HI_ADDR,
 	ARB_ERR_CAP_ADDR,
-	ARB_ERR_CAP_DATA,
 	ARB_ERR_CAP_STATUS,
 	ARB_ERR_CAP_MASTER,
 };
@@ -57,17 +52,24 @@ static const int gisb_offsets_bcm7038[] = {
 	[ARB_ERR_CAP_CLR]	= 0x0c4,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x0c8,
-	[ARB_ERR_CAP_DATA]	= 0x0cc,
 	[ARB_ERR_CAP_STATUS]	= 0x0d0,
 	[ARB_ERR_CAP_MASTER]	= -1,
 };
 
+static const int gisb_offsets_bcm7278[] = {
+	[ARB_TIMER]		= 0x008,
+	[ARB_ERR_CAP_CLR]	= 0x7f8,
+	[ARB_ERR_CAP_HI_ADDR]	= -1,
+	[ARB_ERR_CAP_ADDR]	= 0x7e0,
+	[ARB_ERR_CAP_STATUS]	= 0x7f0,
+	[ARB_ERR_CAP_MASTER]	= 0x7f4,
+};
+
 static const int gisb_offsets_bcm7400[] = {
 	[ARB_TIMER]		= 0x00c,
 	[ARB_ERR_CAP_CLR]	= 0x0c8,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x0cc,
-	[ARB_ERR_CAP_DATA]	= 0x0d0,
 	[ARB_ERR_CAP_STATUS]	= 0x0d4,
 	[ARB_ERR_CAP_MASTER]	= 0x0d8,
 };
@@ -77,7 +79,6 @@ static const int gisb_offsets_bcm7435[] = {
 	[ARB_ERR_CAP_CLR]	= 0x168,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x16c,
-	[ARB_ERR_CAP_DATA]	= 0x170,
 	[ARB_ERR_CAP_STATUS]	= 0x174,
 	[ARB_ERR_CAP_MASTER]	= 0x178,
 };
@@ -87,7 +88,6 @@ static const int gisb_offsets_bcm7445[] = {
 	[ARB_ERR_CAP_CLR]	= 0x7e4,
 	[ARB_ERR_CAP_HI_ADDR]	= 0x7e8,
 	[ARB_ERR_CAP_ADDR]	= 0x7ec,
-	[ARB_ERR_CAP_DATA]	= 0x7f0,
 	[ARB_ERR_CAP_STATUS]	= 0x7f4,
 	[ARB_ERR_CAP_MASTER]	= 0x7f8,
 };
@@ -109,9 +109,13 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg)
 {
 	int offset = gdev->gisb_offsets[reg];
 
-	/* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
-	if (offset == -1)
-		return 1;
+	if (offset < 0) {
+		/* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
+		if (reg == ARB_ERR_CAP_MASTER)
+			return 1;
+		else
+			return 0;
+	}
 
 	if (gdev->big_endian)
 		return ioread32be(gdev->base + offset);
@@ -119,6 +123,16 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg)
 		return ioread32(gdev->base + offset);
 }
 
+static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev)
+{
+	u64 value;
+
+	value = gisb_read(gdev, ARB_ERR_CAP_ADDR);
+	value |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
+
+	return value;
+}
+
 static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
 {
 	int offset = gdev->gisb_offsets[reg];
@@ -127,9 +141,9 @@ static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
 		return;
 
 	if (gdev->big_endian)
-		iowrite32be(val, gdev->base + reg);
+		iowrite32be(val, gdev->base + offset);
 	else
-		iowrite32(val, gdev->base + reg);
+		iowrite32(val, gdev->base + offset);
 }
 
 static ssize_t gisb_arb_get_timeout(struct device *dev,
@@ -185,7 +199,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
 					const char *reason)
 {
 	u32 cap_status;
-	unsigned long arb_addr;
+	u64 arb_addr;
 	u32 master;
 	const char *m_name;
 	char m_fmt[11];
@@ -197,10 +211,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
 		return 1;
 
 	/* Read the address and master */
-	arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff;
-#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
-	arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
-#endif
+	arb_addr = gisb_read_address(gdev);
 	master = gisb_read(gdev, ARB_ERR_CAP_MASTER);
 
 	m_name = brcmstb_gisb_master_to_str(gdev, master);
@@ -209,7 +220,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
 		m_name = m_fmt;
 	}
 
-	pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n",
+	pr_crit("%s: %s at 0x%llx [%c %s], core: %s\n",
 		__func__, reason, arb_addr,
 		cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R',
 		cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "",
@@ -221,27 +232,6 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
 	return 0;
 }
 
-#ifdef CONFIG_ARM
-static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
-				     struct pt_regs *regs)
-{
-	int ret = 0;
-	struct brcmstb_gisb_arb_device *gdev;
-
-	/* iterate over each GISB arb registered handlers */
-	list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
-		ret |= brcmstb_gisb_arb_decode_addr(gdev, "bus error");
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	*/
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return ret;
-}
-#endif
-
 #ifdef CONFIG_MIPS
 static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup)
 {
@@ -279,6 +269,36 @@ static irqreturn_t brcmstb_gisb_tea_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/*
+ * Dump out gisb errors on die or panic.
+ */
+static int dump_gisb_error(struct notifier_block *self, unsigned long v,
+			   void *p);
+
+static struct notifier_block gisb_die_notifier = {
+	.notifier_call = dump_gisb_error,
+};
+
+static struct notifier_block gisb_panic_notifier = {
+	.notifier_call = dump_gisb_error,
+};
+
+static int dump_gisb_error(struct notifier_block *self, unsigned long v,
+			   void *p)
+{
+	struct brcmstb_gisb_arb_device *gdev;
+	const char *reason = "panic";
+
+	if (self == &gisb_die_notifier)
+		reason = "die";
+
+	/* iterate over each GISB arb registered handlers */
+	list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
+		brcmstb_gisb_arb_decode_addr(gdev, reason);
+
+	return NOTIFY_DONE;
+}
+
 static DEVICE_ATTR(gisb_arb_timeout, S_IWUSR | S_IRUGO,
 		gisb_arb_get_timeout, gisb_arb_set_timeout);
 
@@ -296,6 +316,7 @@ static const struct of_device_id brcmstb_gisb_arb_of_match[] = {
 	{ .compatible = "brcm,bcm7445-gisb-arb", .data = gisb_offsets_bcm7445 },
 	{ .compatible = "brcm,bcm7435-gisb-arb", .data = gisb_offsets_bcm7435 },
 	{ .compatible = "brcm,bcm7400-gisb-arb", .data = gisb_offsets_bcm7400 },
+	{ .compatible = "brcm,bcm7278-gisb-arb", .data = gisb_offsets_bcm7278 },
 	{ .compatible = "brcm,bcm7038-gisb-arb", .data = gisb_offsets_bcm7038 },
 	{ },
 };
@@ -378,14 +399,16 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
 
 	list_add_tail(&gdev->next, &brcmstb_gisb_arb_device_list);
 
-#ifdef CONFIG_ARM
-	hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0,
-			"imprecise external abort");
-#endif
 #ifdef CONFIG_MIPS
 	board_be_handler = brcmstb_bus_error_handler;
 #endif
 
+	if (list_is_singular(&brcmstb_gisb_arb_device_list)) {
+		register_die_notifier(&gisb_die_notifier);
+		atomic_notifier_chain_register(&panic_notifier_list,
+					       &gisb_panic_notifier);
+	}
+
 	dev_info(&pdev->dev, "registered mem: %p, irqs: %d, %d\n",
 			gdev->base, timeout_irq, tea_irq);
 
diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig
index a39b0d58ddd0..49f1e2a75d61 100644
--- a/drivers/soc/bcm/Kconfig
+++ b/drivers/soc/bcm/Kconfig
@@ -11,7 +11,7 @@ config RASPBERRYPI_POWER
 
 config SOC_BRCMSTB
 	bool "Broadcom STB SoC drivers"
-	depends on ARM
+	depends on ARM || ARM64 || BMIPS_GENERIC || COMPILE_TEST
 	select SOC_BUS
 	help
 	  Enables drivers for the Broadcom Set-Top Box (STB) series of chips.