diff options
author | Sean Young <sean@mess.org> | 2013-01-06 17:19:43 +0100 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2013-02-05 21:59:23 +0100 |
commit | 6f2627c29f6619ebdbc6de8934b33c23b73be8e6 (patch) | |
tree | 86602ab2d00ca893e25f1be0020c23fab7319e5c /drivers | |
parent | [media] ARM: davinci: da850 evm: pass platform data for adv7343 encoder (diff) | |
download | linux-6f2627c29f6619ebdbc6de8934b33c23b73be8e6.tar.xz linux-6f2627c29f6619ebdbc6de8934b33c23b73be8e6.zip |
[media] winbond-cir: only enable higher sample resolution if needed
A sample resolution of 2us generates more than 300 interrupts per key
and this resolution is not needed unless carrier reports are enabled.
Revert to a resolution of 10us unless carrier reports are needed. This
generates up to a fifth of the interrupts.
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/media/rc/winbond-cir.c | 27 |
1 files changed, 19 insertions, 8 deletions
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c index 85424856ae7f..535a18dccbd0 100644 --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -154,6 +154,8 @@ #define WBCIR_CNTR_R 0x02 /* Invert TX */ #define WBCIR_IRTX_INV 0x04 +/* Receiver oversampling */ +#define WBCIR_RX_T_OV 0x40 /* Valid banks for the SP3 UART */ enum wbcir_bank { @@ -394,7 +396,8 @@ wbcir_irq_rx(struct wbcir_data *data, struct pnp_dev *device) if (data->rxstate == WBCIR_RXSTATE_ERROR) continue; - duration = ((irdata & 0x7F) + 1) * 2; + duration = ((irdata & 0x7F) + 1) * + (data->carrier_report_enabled ? 2 : 10); rawir.pulse = irdata & 0x80 ? false : true; rawir.duration = US_TO_NS(duration); @@ -550,6 +553,17 @@ wbcir_set_carrier_report(struct rc_dev *dev, int enable) wbcir_set_bits(data->ebase + WBCIR_REG_ECEIR_CCTL, WBCIR_CNTR_EN, WBCIR_CNTR_EN | WBCIR_CNTR_R); + /* Set a higher sampling resolution if carrier reports are enabled */ + wbcir_select_bank(data, WBCIR_BANK_2); + data->dev->rx_resolution = US_TO_NS(enable ? 2 : 10); + outb(enable ? 0x03 : 0x0f, data->sbase + WBCIR_REG_SP3_BGDL); + outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH); + + /* Enable oversampling if carrier reports are enabled */ + wbcir_select_bank(data, WBCIR_BANK_7); + wbcir_set_bits(data->sbase + WBCIR_REG_SP3_RCCFG, + enable ? WBCIR_RX_T_OV : 0, WBCIR_RX_T_OV); + data->carrier_report_enabled = enable; spin_unlock_irqrestore(&data->spinlock, flags); @@ -931,8 +945,8 @@ wbcir_init_hw(struct wbcir_data *data) /* prescaler 1.0, tx/rx fifo lvl 16 */ outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2); - /* Set baud divisor to sample every 2 ns */ - outb(0x03, data->sbase + WBCIR_REG_SP3_BGDL); + /* Set baud divisor to sample every 10 us */ + outb(0x0f, data->sbase + WBCIR_REG_SP3_BGDL); outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH); /* Set CEIR mode */ @@ -941,12 +955,9 @@ wbcir_init_hw(struct wbcir_data *data) inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */ inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */ - /* - * Disable RX demod, enable run-length enc/dec, set freq span and - * enable over-sampling - */ + /* Disable RX demod, enable run-length enc/dec, set freq span */ wbcir_select_bank(data, WBCIR_BANK_7); - outb(0xd0, data->sbase + WBCIR_REG_SP3_RCCFG); + outb(0x90, data->sbase + WBCIR_REG_SP3_RCCFG); /* Disable timer */ wbcir_select_bank(data, WBCIR_BANK_4); |