Merge branch 'earlycon-dt' into for-next

32 files changed, 3461 insertions, 845 deletions

diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index f1fbf4f1e5be..e00f8f5b5c8e 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -118,10 +118,6 @@ static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
 
 int hci_uart_tx_wakeup(struct hci_uart *hu)
 {
-	struct tty_struct *tty = hu->tty;
-	struct hci_dev *hdev = hu->hdev;
-	struct sk_buff *skb;
-
 	if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) {
 		set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
 		return 0;
@@ -129,6 +125,22 @@ int hci_uart_tx_wakeup(struct hci_uart *hu)
 
 	BT_DBG("");
 
+	schedule_work(&hu->write_work);
+
+	return 0;
+}
+
+static void hci_uart_write_work(struct work_struct *work)
+{
+	struct hci_uart *hu = container_of(work, struct hci_uart, write_work);
+	struct tty_struct *tty = hu->tty;
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+
+	/* REVISIT: should we cope with bad skbs or ->write() returning
+	 * and error value ?
+	 */
+
 restart:
 	clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
 
@@ -153,7 +165,6 @@ restart:
 		goto restart;
 
 	clear_bit(HCI_UART_SENDING, &hu->tx_state);
-	return 0;
 }
 
 static void hci_uart_init_work(struct work_struct *work)
@@ -282,6 +293,7 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	tty->receive_room = 65536;
 
 	INIT_WORK(&hu->init_ready, hci_uart_init_work);
+	INIT_WORK(&hu->write_work, hci_uart_write_work);
 
 	spin_lock_init(&hu->rx_lock);
 
@@ -319,6 +331,8 @@ static void hci_uart_tty_close(struct tty_struct *tty)
 	if (hdev)
 		hci_uart_close(hdev);
 
+	cancel_work_sync(&hu->write_work);
+
 	if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
 		if (hdev) {
 			if (test_bit(HCI_UART_REGISTERED, &hu->flags))
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index fffa61ff5cb1..12df101ca942 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -68,6 +68,7 @@ struct hci_uart {
 	unsigned long		hdev_flags;
 
 	struct work_struct	init_ready;
+	struct work_struct	write_work;
 
 	struct hci_uart_proto	*proto;
 	void			*priv;
diff --git a/drivers/clk/rockchip/clk-rockchip.c b/drivers/clk/rockchip/clk-rockchip.c
index 967c141b1a20..4cf838d52ef6 100644
--- a/drivers/clk/rockchip/clk-rockchip.c
+++ b/drivers/clk/rockchip/clk-rockchip.c
@@ -24,8 +24,7 @@ static DEFINE_SPINLOCK(clk_lock);
  * Gate clocks
  */
 
-static void __init rk2928_gate_clk_init(struct device_node *node,
-					 void *data)
+static void __init rk2928_gate_clk_init(struct device_node *node)
 {
 	struct clk_onecell_data *clk_data;
 	const char *clk_parent;
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index bd7dc733c1ca..9eddf22d56a4 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -1278,8 +1278,7 @@ static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_mat
 	const struct of_device_id *match;
 	void (*setup_function)(struct device_node *, const void *) = function;
 
-	for_each_matching_node(np, clk_match) {
-		match = of_match_node(clk_match, np);
+	for_each_matching_node_and_match(np, clk_match, &match) {
 		data = match->data;
 		setup_function(np, data);
 	}
@@ -1310,7 +1309,7 @@ static void __init sunxi_clock_protect(void)
 	}
 }
 
-static void __init sunxi_init_clocks(void)
+static void __init sunxi_init_clocks(struct device_node *np)
 {
 	/* Register factor clocks */
 	of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup);
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
index 3e2999d11d15..58734817d502 100644
--- a/drivers/clk/ti/gate.c
+++ b/drivers/clk/ti/gate.c
@@ -221,7 +221,7 @@ static void __init of_ti_gate_clk_setup(struct device_node *node)
 {
 	_of_ti_gate_clk_setup(node, &omap_gate_clk_ops, NULL);
 }
-CLK_OF_DECLARE(ti_gate_clk, "ti,gate-clock", of_ti_gate_clk_setup)
+CLK_OF_DECLARE(ti_gate_clk, "ti,gate-clock", of_ti_gate_clk_setup);
 
 static void __init of_ti_wait_gate_clk_setup(struct device_node *node)
 {
diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
index ae2e4278c42a..0093a8e49e14 100644
--- a/drivers/clocksource/clksrc-of.c
+++ b/drivers/clocksource/clksrc-of.c
@@ -27,7 +27,7 @@ void __init clocksource_of_init(void)
 {
 	struct device_node *np;
 	const struct of_device_id *match;
-	clocksource_of_init_fn init_func;
+	of_init_fn_1 init_func;
 	unsigned clocksources = 0;
 
 	for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
index 63b3d4eb0ef7..4044ff287663 100644
--- a/drivers/irqchip/irq-mxs.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -96,7 +96,7 @@ static struct irq_domain_ops icoll_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
-static void __init icoll_of_init(struct device_node *np,
+static int __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
 	icoll_base = of_iomap(np, 0);
@@ -110,6 +110,6 @@ static void __init icoll_of_init(struct device_node *np,
 
 	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
 					     &icoll_irq_domain_ops, NULL);
-	WARN_ON(!icoll_domain);
+	return icoll_domain ? 0 : -ENODEV;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c
index bbcc944ed94f..78a6accd205f 100644
--- a/drivers/irqchip/irq-s3c24xx.c
+++ b/drivers/irqchip/irq-s3c24xx.c
@@ -1323,8 +1323,7 @@ static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = {
 };
 
 int __init s3c2410_init_intc_of(struct device_node *np,
-			struct device_node *interrupt_parent,
-			struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl)
+			struct device_node *interrupt_parent)
 {
 	return s3c_init_intc_of(np, interrupt_parent,
 				s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl));
@@ -1346,8 +1345,7 @@ static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = {
 };
 
 int __init s3c2416_init_intc_of(struct device_node *np,
-			struct device_node *interrupt_parent,
-			struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl)
+			struct device_node *interrupt_parent)
 {
 	return s3c_init_intc_of(np, interrupt_parent,
 				s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl));
diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c
index cad3e2495552..0fe2f718d81c 100644
--- a/drivers/irqchip/irqchip.c
+++ b/drivers/irqchip/irqchip.c
@@ -19,11 +19,11 @@
  * special section.
  */
 static const struct of_device_id
-irqchip_of_match_end __used __section(__irqchip_of_end);
+irqchip_of_match_end __used __section(__irqchip_of_table_end);
 
-extern struct of_device_id __irqchip_begin[];
+extern struct of_device_id __irqchip_of_table[];
 
 void __init irqchip_init(void)
 {
-	of_irq_init(__irqchip_begin);
+	of_irq_init(__irqchip_of_table);
 }
diff --git a/drivers/irqchip/irqchip.h b/drivers/irqchip/irqchip.h
index e445ba2d6add..0f6486d4f1b0 100644
--- a/drivers/irqchip/irqchip.h
+++ b/drivers/irqchip/irqchip.h
@@ -11,6 +11,8 @@
 #ifndef _IRQCHIP_H
 #define _IRQCHIP_H
 
+#include <linux/of.h>
+
 /*
  * This macro must be used by the different irqchip drivers to declare
  * the association between their DT compatible string and their
@@ -21,9 +23,6 @@
  * @compstr: compatible string of the irqchip driver
  * @fn: initialization function
  */
-#define IRQCHIP_DECLARE(name,compstr,fn)				\
-	static const struct of_device_id irqchip_of_match_##name	\
-	__used __section(__irqchip_of_table)				\
-	= { .compatible = compstr, .data = fn }
+#define IRQCHIP_DECLARE(name, compat, fn) OF_DECLARE_2(irqchip, name, compat, fn)
 
 #endif
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 9891232f999e..099b1fb00af4 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -1,5 +1,6 @@
 obj-y = base.o device.o platform.o
 obj-$(CONFIG_OF_FLATTREE) += fdt.o
+obj-$(CONFIG_OF_EARLY_FLATTREE) += fdt_address.o
 obj-$(CONFIG_OF_PROMTREE) += pdt.o
 obj-$(CONFIG_OF_ADDRESS)  += address.o
 obj-$(CONFIG_OF_IRQ)    += irq.o
@@ -12,3 +13,4 @@ obj-$(CONFIG_OF_MTD)	+= of_mtd.o
 obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o
 
 CFLAGS_fdt.o = -I$(src)/../../scripts/dtc/libfdt
+CFLAGS_fdt_address.o = -I$(src)/../../scripts/dtc/libfdt
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 17be90f5445f..c4cddf0cd96d 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -21,6 +21,7 @@
 #include <linux/slab.h>
 #include <linux/libfdt.h>
 #include <linux/debugfs.h>
+#include <linux/serial_core.h>
 
 #include <asm/setup.h>  /* for COMMAND_LINE_SIZE */
 #include <asm/page.h>
@@ -696,6 +697,61 @@ static inline void early_init_dt_check_for_initrd(unsigned long node)
 }
 #endif /* CONFIG_BLK_DEV_INITRD */
 
+#ifdef CONFIG_SERIAL_EARLYCON
+extern struct of_device_id __earlycon_of_table[];
+
+int __init early_init_dt_scan_chosen_serial(void)
+{
+	int offset;
+	const char *p;
+	int l;
+	const struct of_device_id *match = __earlycon_of_table;
+	const void *fdt = initial_boot_params;
+
+	offset = fdt_path_offset(fdt, "/chosen");
+	if (offset < 0)
+		offset = fdt_path_offset(fdt, "/chosen@0");
+	if (offset < 0)
+		return -ENOENT;
+
+	p = fdt_getprop(fdt, offset, "stdout-path", &l);
+	if (!p)
+		p = fdt_getprop(fdt, offset, "linux,stdout-path", &l);
+	if (!p || !l)
+		return -ENOENT;
+
+	/* Get the node specified by stdout-path */
+	offset = fdt_path_offset(fdt, p);
+	if (offset < 0)
+		return -ENODEV;
+
+	while (match->compatible) {
+		unsigned long addr;
+		if (fdt_node_check_compatible(fdt, offset, match->compatible)) {
+			match++;
+			continue;
+		}
+
+		addr = fdt_translate_address(fdt, offset);
+		if (!addr)
+			return -ENXIO;
+
+		of_setup_earlycon(addr, match->data);
+		return 0;
+	}
+	return -ENODEV;
+}
+
+static int __init setup_of_earlycon(char *buf)
+{
+	if (buf)
+		return 0;
+
+	return early_init_dt_scan_chosen_serial();
+}
+early_param("earlycon", setup_of_earlycon);
+#endif
+
 /**
  * early_init_dt_scan_root - fetch the top level address and size cells
  */
diff --git a/drivers/of/fdt_address.c b/drivers/of/fdt_address.c
new file mode 100644
index 000000000000..8d3dc6fbdb7a
--- /dev/null
+++ b/drivers/of/fdt_address.c
@@ -0,0 +1,241 @@
+/*
+ * FDT Address translation based on u-boot fdt_support.c which in turn was
+ * based on the kernel unflattened DT address translation code.
+ *
+ * (C) Copyright 2007
+ * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/sizes.h>
+
+/* Max address size we deal with */
+#define OF_MAX_ADDR_CELLS	4
+#define OF_CHECK_COUNTS(na, ns)	((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
+			(ns) > 0)
+
+/* Debug utility */
+#ifdef DEBUG
+static void __init of_dump_addr(const char *s, const __be32 *addr, int na)
+{
+	pr_debug("%s", s);
+	while(na--)
+		pr_cont(" %08x", *(addr++));
+	pr_debug("\n");
+}
+#else
+static void __init of_dump_addr(const char *s, const __be32 *addr, int na) { }
+#endif
+
+/* Callbacks for bus specific translators */
+struct of_bus {
+	void		(*count_cells)(const void *blob, int parentoffset,
+				int *addrc, int *sizec);
+	u64		(*map)(__be32 *addr, const __be32 *range,
+				int na, int ns, int pna);
+	int		(*translate)(__be32 *addr, u64 offset, int na);
+};
+
+/* Default translator (generic bus) */
+static void __init fdt_bus_default_count_cells(const void *blob, int parentoffset,
+					       int *addrc, int *sizec)
+{
+	const __be32 *prop;
+
+	if (addrc) {
+		prop = fdt_getprop(blob, parentoffset, "#address-cells", NULL);
+		if (prop)
+			*addrc = be32_to_cpup(prop);
+		else
+			*addrc = dt_root_addr_cells;
+	}
+
+	if (sizec) {
+		prop = fdt_getprop(blob, parentoffset, "#size-cells", NULL);
+		if (prop)
+			*sizec = be32_to_cpup(prop);
+		else
+			*sizec = dt_root_size_cells;
+	}
+}
+
+static u64 __init fdt_bus_default_map(__be32 *addr, const __be32 *range,
+				      int na, int ns, int pna)
+{
+	u64 cp, s, da;
+
+	cp = of_read_number(range, na);
+	s  = of_read_number(range + na + pna, ns);
+	da = of_read_number(addr, na);
+
+	pr_debug("FDT: default map, cp=%llx, s=%llx, da=%llx\n",
+	    cp, s, da);
+
+	if (da < cp || da >= (cp + s))
+		return OF_BAD_ADDR;
+	return da - cp;
+}
+
+static int __init fdt_bus_default_translate(__be32 *addr, u64 offset, int na)
+{
+	u64 a = of_read_number(addr, na);
+	memset(addr, 0, na * 4);
+	a += offset;
+	if (na > 1)
+		addr[na - 2] = cpu_to_fdt32(a >> 32);
+	addr[na - 1] = cpu_to_fdt32(a & 0xffffffffu);
+
+	return 0;
+}
+
+/* Array of bus specific translators */
+static const struct of_bus of_busses[] __initconst = {
+	/* Default */
+	{
+		.count_cells = fdt_bus_default_count_cells,
+		.map = fdt_bus_default_map,
+		.translate = fdt_bus_default_translate,
+	},
+};
+
+static int __init fdt_translate_one(const void *blob, int parent,
+				    const struct of_bus *bus,
+				    const struct of_bus *pbus, __be32 *addr,
+				    int na, int ns, int pna, const char *rprop)
+{
+	const __be32 *ranges;
+	int rlen;
+	int rone;
+	u64 offset = OF_BAD_ADDR;
+
+	ranges = fdt_getprop(blob, parent, rprop, &rlen);
+	if (!ranges)
+		return 1;
+	if (rlen == 0) {
+		offset = of_read_number(addr, na);
+		memset(addr, 0, pna * 4);
+		pr_debug("FDT: empty ranges, 1:1 translation\n");
+		goto finish;
+	}
+
+	pr_debug("FDT: walking ranges...\n");
+
+	/* Now walk through the ranges */
+	rlen /= 4;
+	rone = na + pna + ns;
+	for (; rlen >= rone; rlen -= rone, ranges += rone) {
+		offset = bus->map(addr, ranges, na, ns, pna);
+		if (offset != OF_BAD_ADDR)
+			break;
+	}
+	if (offset == OF_BAD_ADDR) {
+		pr_debug("FDT: not found !\n");
+		return 1;
+	}
+	memcpy(addr, ranges + na, 4 * pna);
+
+ finish:
+	of_dump_addr("FDT: parent translation for:", addr, pna);
+	pr_debug("FDT: with offset: %llx\n", offset);
+
+	/* Translate it into parent bus space */
+	return pbus->translate(addr, offset, pna);
+}
+
+/*
+ * Translate an address from the device-tree into a CPU physical address,
+ * this walks up the tree and applies the various bus mappings on the
+ * way.
+ *
+ * Note: We consider that crossing any level with #size-cells == 0 to mean
+ * that translation is impossible (that is we are not dealing with a value
+ * that can be mapped to a cpu physical address). This is not really specified
+ * that way, but this is traditionally the way IBM at least do things
+ */
+u64 __init fdt_translate_address(const void *blob, int node_offset)
+{
+	int parent, len;
+	const struct of_bus *bus, *pbus;
+	const __be32 *reg;
+	__be32 addr[OF_MAX_ADDR_CELLS];
+	int na, ns, pna, pns;
+	u64 result = OF_BAD_ADDR;
+
+	pr_debug("FDT: ** translation for device %s **\n",
+		 fdt_get_name(blob, node_offset, NULL));
+
+	reg = fdt_getprop(blob, node_offset, "reg", &len);
+	if (!reg) {
+		pr_err("FDT: warning: device tree node '%s' has no address.\n",
+			fdt_get_name(blob, node_offset, NULL));
+		goto bail;
+	}
+
+	/* Get parent & match bus type */
+	parent = fdt_parent_offset(blob, node_offset);
+	if (parent < 0)
+		goto bail;
+	bus = &of_busses[0];
+
+	/* Cound address cells & copy address locally */
+	bus->count_cells(blob, parent, &na, &ns);
+	if (!OF_CHECK_COUNTS(na, ns)) {
+		pr_err("FDT: Bad cell count for %s\n",
+		       fdt_get_name(blob, node_offset, NULL));
+		goto bail;
+	}
+	memcpy(addr, reg, na * 4);
+
+	pr_debug("FDT: bus (na=%d, ns=%d) on %s\n",
+		 na, ns, fdt_get_name(blob, parent, NULL));
+	of_dump_addr("OF: translating address:", addr, na);
+
+	/* Translate */
+	for (;;) {
+		/* Switch to parent bus */
+		node_offset = parent;
+		parent = fdt_parent_offset(blob, node_offset);
+
+		/* If root, we have finished */
+		if (parent < 0) {
+			pr_debug("FDT: reached root node\n");
+			result = of_read_number(addr, na);
+			break;
+		}
+
+		/* Get new parent bus and counts */
+		pbus = &of_busses[0];
+		pbus->count_cells(blob, parent, &pna, &pns);
+		if (!OF_CHECK_COUNTS(pna, pns)) {
+			pr_err("FDT: Bad cell count for %s\n",
+				fdt_get_name(blob, node_offset, NULL));
+			break;
+		}
+
+		pr_debug("FDT: parent bus (na=%d, ns=%d) on %s\n",
+			 pna, pns, fdt_get_name(blob, parent, NULL));
+
+		/* Apply bus translation */
+		if (fdt_translate_one(blob, node_offset, bus, pbus,
+					addr, na, ns, pna, "ranges"))
+			break;
+
+		/* Complete the move up one level */
+		na = pna;
+		ns = pns;
+		bus = pbus;
+
+		of_dump_addr("FDT: one level translation:", addr, na);
+	}
+ bail:
+	return result;
+}
diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
index e420eb52e5c9..632aae861375 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
@@ -188,7 +188,7 @@ static int __init __reserved_mem_init_node(struct reserved_mem *rmem)
 		if (!of_flat_dt_is_compatible(rmem->fdt_node, compat))
 			continue;
 
-		if (initfn(rmem, rmem->fdt_node, rmem->name) == 0) {
+		if (initfn(rmem) == 0) {
 			pr_info("Reserved memory: initialized node %s, compatible id %s\n",
 				rmem->name, compat);
 			return 0;
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 2d4bd3929e50..053c2007b054 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1926,13 +1926,8 @@ static void serial8250_put_poll_char(struct uart_port *port,
 	wait_for_xmitr(up, BOTH_EMPTY);
 	/*
 	 *	Send the character out.
-	 *	If a LF, also do CR...
 	 */
 	serial_port_out(port, UART_TX, c);
-	if (c == 10) {
-		wait_for_xmitr(up, BOTH_EMPTY);
-		serial_port_out(port, UART_TX, 13);
-	}
 
 	/*
 	 *	Finally, wait for transmitter to become empty
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index ed3113576740..51b307aab75e 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -62,6 +62,70 @@ struct dw8250_data {
 	struct uart_8250_dma	dma;
 };
 
+struct dw8250_acpi_desc {
+	void (*set_termios)(struct uart_port *p, struct ktermios *termios,
+			    struct ktermios *old);
+};
+
+#define BYT_PRV_CLK			0x800
+#define BYT_PRV_CLK_EN			(1 << 0)
+#define BYT_PRV_CLK_M_VAL_SHIFT		1
+#define BYT_PRV_CLK_N_VAL_SHIFT		16
+#define BYT_PRV_CLK_UPDATE		(1 << 31)
+
+static void byt_set_termios(struct uart_port *p, struct ktermios *termios,
+			    struct ktermios *old)
+{
+	unsigned int baud = tty_termios_baud_rate(termios);
+	unsigned int m, n;
+	u32 reg;
+
+	/*
+	* For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the
+	* dividers must be adjusted.
+	*
+	* uartclk = (m / n) * 100 MHz, where m <= n
+	*/
+	switch (baud) {
+	case 500000:
+	case 1000000:
+	case 2000000:
+	case 4000000:
+		m = 64;
+		n = 100;
+		p->uartclk = 64000000;
+		break;
+	case 3500000:
+		m = 56;
+		n = 100;
+		p->uartclk = 56000000;
+		break;
+	case 1500000:
+	case 3000000:
+		m = 48;
+		n = 100;
+		p->uartclk = 48000000;
+		break;
+	case 2500000:
+		m = 40;
+		n = 100;
+		p->uartclk = 40000000;
+		break;
+	default:
+		m = 2304;
+		n = 3125;
+		p->uartclk = 73728000;
+	}
+
+	/* Reset the clock */
+	reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT);
+	writel(reg, p->membase + BYT_PRV_CLK);
+	reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
+	writel(reg, p->membase + BYT_PRV_CLK);
+
+	serial8250_do_set_termios(p, termios, old);
+}
+
 static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
 {
 	struct dw8250_data *d = p->private_data;
@@ -278,6 +342,7 @@ static int dw8250_probe_acpi(struct uart_8250_port *up,
 {
 	const struct acpi_device_id *id;
 	struct uart_port *p = &up->port;
+	struct dw8250_acpi_desc *acpi_desc;
 
 	dw8250_setup_port(up);
 
@@ -290,14 +355,18 @@ static int dw8250_probe_acpi(struct uart_8250_port *up,
 	p->serial_out = dw8250_serial_out32;
 	p->regshift = 2;
 
-	if (!p->uartclk)
-		p->uartclk = (unsigned int)id->driver_data;
-
 	up->dma = &data->dma;
 
 	up->dma->rxconf.src_maxburst = p->fifosize / 4;
 	up->dma->txconf.dst_maxburst = p->fifosize / 4;
 
+	acpi_desc = (struct dw8250_acpi_desc *)id->driver_data;
+	if (!acpi_desc)
+		return 0;
+
+	if (acpi_desc->set_termios)
+		p->set_termios = acpi_desc->set_termios;
+
 	return 0;
 }
 
@@ -445,12 +514,16 @@ static const struct of_device_id dw8250_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, dw8250_of_match);
 
+static struct dw8250_acpi_desc byt_8250_desc = {
+	.set_termios = byt_set_termios,
+};
+
 static const struct acpi_device_id dw8250_acpi_match[] = {
 	{ "INT33C4", 0 },
 	{ "INT33C5", 0 },
 	{ "INT3434", 0 },
 	{ "INT3435", 0 },
-	{ "80860F0A", 0 },
+	{ "80860F0A", (kernel_ulong_t)&byt_8250_desc},
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index c100d6343d50..cfef801a49d4 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -35,18 +35,8 @@
 #include <linux/serial_8250.h>
 #include <asm/io.h>
 #include <asm/serial.h>
-#ifdef CONFIG_FIX_EARLYCON_MEM
-#include <asm/pgtable.h>
-#include <asm/fixmap.h>
-#endif
 
-struct early_serial8250_device {
-	struct uart_port port;
-	char options[16];		/* e.g., 115200n8 */
-	unsigned int baud;
-};
-
-static struct early_serial8250_device early_device;
+static struct earlycon_device *early_device;
 
 unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset)
 {
@@ -100,7 +90,7 @@ static void __init serial_putc(struct uart_port *port, int c)
 static void __init early_serial8250_write(struct console *console,
 					const char *s, unsigned int count)
 {
-	struct uart_port *port = &early_device.port;
+	struct uart_port *port = &early_device->port;
 	unsigned int ier;
 
 	/* Save the IER and disable interrupts */
@@ -129,7 +119,7 @@ static unsigned int __init probe_baud(struct uart_port *port)
 	return (port->uartclk / 16) / quot;
 }
 
-static void __init init_port(struct early_serial8250_device *device)
+static void __init init_port(struct earlycon_device *device)
 {
 	struct uart_port *port = &device->port;
 	unsigned int divisor;
@@ -148,128 +138,42 @@ static void __init init_port(struct early_serial8250_device *device)
 	serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
 }
 
-static int __init parse_options(struct early_serial8250_device *device,
-								char *options)
+static int __init early_serial8250_setup(struct earlycon_device *device,
+					 const char *options)
 {
-	struct uart_port *port = &device->port;
-	int mmio, mmio32, length;
-
-	if (!options)
-		return -ENODEV;
-
-	port->uartclk = BASE_BAUD * 16;
-
-	mmio = !strncmp(options, "mmio,", 5);
-	mmio32 = !strncmp(options, "mmio32,", 7);
-	if (mmio || mmio32) {
-		port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32);
-		port->mapbase = simple_strtoul(options + (mmio ? 5 : 7),
-					       &options, 0);
-		if (mmio32)
-			port->regshift = 2;
-#ifdef CONFIG_FIX_EARLYCON_MEM
-		set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
-					port->mapbase & PAGE_MASK);
-		port->membase =
-			(void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
-		port->membase += port->mapbase & ~PAGE_MASK;
-#else
-		port->membase = ioremap_nocache(port->mapbase, 64);
-		if (!port->membase) {
-			printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
-				__func__,
-			       (unsigned long long) port->mapbase);
-			return -ENOMEM;
-		}
-#endif
-	} else if (!strncmp(options, "io,", 3)) {
-		port->iotype = UPIO_PORT;
-		port->iobase = simple_strtoul(options + 3, &options, 0);
-		mmio = 0;
-	} else
-		return -EINVAL;
-
-	options = strchr(options, ',');
-	if (options) {
-		options++;
-		device->baud = simple_strtoul(options, NULL, 0);
-		length = min(strcspn(options, " ") + 1,
-			     (size_t)(sizeof(device->options)));
-		strlcpy(device->options, options, length);
-	} else {
-		device->baud = probe_baud(port);
-		snprintf(device->options, sizeof(device->options), "%u",
-			device->baud);
-	}
-
-	if (mmio || mmio32)
-		printk(KERN_INFO
-		       "Early serial console at MMIO%s 0x%llx (options '%s')\n",
-			mmio32 ? "32" : "",
-			(unsigned long long)port->mapbase,
-			device->options);
-	else
-		printk(KERN_INFO
-		      "Early serial console at I/O port 0x%lx (options '%s')\n",
-			port->iobase,
-			device->options);
-
-	return 0;
-}
-
-static struct console early_serial8250_console __initdata = {
-	.name	= "uart",
-	.write	= early_serial8250_write,
-	.flags	= CON_PRINTBUFFER | CON_BOOT,
-	.index	= -1,
-};
-
-static int __init early_serial8250_setup(char *options)
-{
-	struct early_serial8250_device *device = &early_device;
-	int err;
-
-	if (device->port.membase || device->port.iobase)
+	if (!(device->port.membase || device->port.iobase))
 		return 0;
 
-	err = parse_options(device, options);
-	if (err < 0)
-		return err;
+	if (!device->baud)
+		device->baud = probe_baud(&device->port);
 
 	init_port(device);
+
+	early_device = device;
+	device->con->write = early_serial8250_write;
 	return 0;
 }
+EARLYCON_DECLARE(uart8250, early_serial8250_setup);
+EARLYCON_DECLARE(uart, early_serial8250_setup);
 
 int __init setup_early_serial8250_console(char *cmdline)
 {
-	char *options;
-	int err;
+	char match[] = "uart8250";
 
-	options = strstr(cmdline, "uart8250,");
-	if (!options) {
-		options = strstr(cmdline, "uart,");
-		if (!options)
-			return 0;
-	}
+	if (cmdline && cmdline[4] == ',')
+		match[4] = '\0';
 
-	options = strchr(cmdline, ',') + 1;
-	err = early_serial8250_setup(options);
-	if (err < 0)
-		return err;
-
-	register_console(&early_serial8250_console);
-
-	return 0;
+	return setup_earlycon(cmdline, match, early_serial8250_setup);
 }
 
 int serial8250_find_port_for_earlycon(void)
 {
-	struct early_serial8250_device *device = &early_device;
-	struct uart_port *port = &device->port;
+	struct earlycon_device *device = early_device;
+	struct uart_port *port = device ? &device->port : NULL;
 	int line;
 	int ret;
 
-	if (!device->port.membase && !device->port.iobase)
+	if (!port || (!port->membase && !port->iobase))
 		return -ENODEV;
 
 	line = serial8250_find_port(port);
@@ -284,5 +188,3 @@ int serial8250_find_port_for_earlycon(void)
 
 	return ret;
 }
-
-early_param("earlycon", setup_early_serial8250_console);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 23329918f229..349ee598b34c 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -61,6 +61,7 @@ config SERIAL_8250_CONSOLE
 	bool "Console on 8250/16550 and compatible serial port"
 	depends on SERIAL_8250=y
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
 	---help---
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
@@ -90,11 +91,6 @@ config SERIAL_8250_CONSOLE
 
 	  If unsure, say N.
 
-config FIX_EARLYCON_MEM
-	bool
-	depends on X86
-	default y
-
 config SERIAL_8250_GSC
 	tristate
 	depends on SERIAL_8250 && GSC
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 5d9b01aa54f4..64c565945ac3 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -7,6 +7,13 @@ if TTY
 menu "Serial drivers"
 	depends on HAS_IOMEM
 
+config SERIAL_EARLYCON
+	bool
+	help
+	  Support for early consoles with the earlycon parameter. This enables
+	  the console before standard serial driver is probed. The console is
+	  enabled when early_param is processed.
+
 source "drivers/tty/serial/8250/Kconfig"
 
 comment "Non-8250 serial port support"
@@ -53,6 +60,7 @@ config SERIAL_AMBA_PL011_CONSOLE
 	bool "Support for console on AMBA serial port"
 	depends on SERIAL_AMBA_PL011=y
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
 	---help---
 	  Say Y here if you wish to use an AMBA PrimeCell UART as the system
 	  console (the system console is the device which receives all kernel
@@ -65,6 +73,16 @@ config SERIAL_AMBA_PL011_CONSOLE
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
+config SERIAL_EARLYCON_ARM_SEMIHOST
+	bool "Early console using ARM semihosting"
+	depends on ARM64 || ARM
+	select SERIAL_EARLYCON
+	help
+	  Support for early debug console using ARM semihosting. This enables
+	  the console before standard serial driver is probed. This is enabled
+	  with "earlycon=smh" on the kernel command line. The console is
+	  enabled when early_param is processed.
+
 config SERIAL_SB1250_DUART
 	tristate "BCM1xxx on-chip DUART serial support"
 	depends on SIBYTE_SB1xxx_SOC=y
@@ -1160,6 +1178,16 @@ config SERIAL_SCCNXP_CONSOLE
 	help
 	  Support for console on SCCNXP serial ports.
 
+config SERIAL_SC16IS7XX
+	tristate "SC16IS7xx serial support"
+	depends on I2C
+	select SERIAL_CORE
+	select REGMAP_I2C if I2C
+	help
+	  This selects support for SC16IS7xx serial ports.
+	  Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
+	  SC16IS760 and SC16IS762.
+
 config SERIAL_BFIN_SPORT
 	tristate "Blackfin SPORT emulate UART"
 	depends on BLACKFIN
@@ -1369,18 +1397,19 @@ config SERIAL_MXS_AUART_CONSOLE
 	  Enable a MXS AUART port to be the system console.
 
 config SERIAL_XILINX_PS_UART
-	tristate "Xilinx PS UART support"
+	tristate "Cadence (Xilinx Zynq) UART support"
 	depends on OF
 	select SERIAL_CORE
 	help
-	  This driver supports the Xilinx PS UART port.
+	  This driver supports the Cadence UART. It is found e.g. in Xilinx
+	  Zynq.
 
 config SERIAL_XILINX_PS_UART_CONSOLE
-	bool "Xilinx PS UART console support"
+	bool "Cadence UART console support"
 	depends on SERIAL_XILINX_PS_UART=y
 	select SERIAL_CORE_CONSOLE
 	help
-	  Enable a Xilinx PS UART port to be the system console.
+	  Enable a Cadence UART port to be the system console.
 
 config SERIAL_AR933X
 	tristate "AR933X serial port support"
@@ -1508,6 +1537,16 @@ config SERIAL_ST_ASC_CONSOLE
 	depends on SERIAL_ST_ASC=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_MEN_Z135
+	tristate "MEN 16z135 Support"
+	depends on MCB
+	help
+	  Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
+	  on a MCB carrier.
+
+	  This driver can also be build as a module. If so, the module will be called
+	  men_z135_uart.ko
+
 endmenu
 
 endif # TTY
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 3680854fef41..712732b43917 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -5,6 +5,9 @@
 obj-$(CONFIG_SERIAL_CORE) += serial_core.o
 obj-$(CONFIG_SERIAL_21285) += 21285.o
 
+obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
+obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
+
 # These Sparc drivers have to appear before others such as 8250
 # which share ttySx minor node space.  Otherwise console device
 # names change and other unplesantries.
@@ -48,6 +51,7 @@ obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
 obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
 obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
 obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
+obj-$(CONFIG_SERIAL_SC16IS7XX) += sc16is7xx.o
 obj-$(CONFIG_SERIAL_JSM) += jsm/
 obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
 obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
@@ -87,3 +91,4 @@ obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
 obj-$(CONFIG_SERIAL_ARC)	+= arc_uart.o
 obj-$(CONFIG_SERIAL_RP2)	+= rp2.o
 obj-$(CONFIG_SERIAL_FSL_LPUART)	+= fsl_lpuart.o
+obj-$(CONFIG_SERIAL_MEN_Z135)	+= men_z135_uart.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index dacf0a09ab24..908a6e3142a2 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -303,7 +303,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *
 
 	/* Optionally make use of an RX channel as well */
 	chan = dma_request_slave_channel(dev, "rx");
-	
+
 	if (!chan && plat->dma_rx_param) {
 		chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
 
@@ -2045,6 +2045,35 @@ static struct console amba_console = {
 };
 
 #define AMBA_CONSOLE	(&amba_console)
+
+static void pl011_putc(struct uart_port *port, int c)
+{
+	while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF)
+		;
+	writeb(c, port->membase + UART01x_DR);
+	while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY)
+		;
+}
+
+static void pl011_early_write(struct console *con, const char *s, unsigned n)
+{
+	struct earlycon_device *dev = con->data;
+
+	uart_console_write(&dev->port, s, n, pl011_putc);
+}
+
+static int __init pl011_early_console_setup(struct earlycon_device *device,
+					    const char *opt)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->con->write = pl011_early_write;
+	return 0;
+}
+EARLYCON_DECLARE(pl011, pl011_early_console_setup);
+OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
+
 #else
 #define AMBA_CONSOLE	NULL
 #endif
diff --git a/drivers/tty/serial/earlycon-arm-semihost.c b/drivers/tty/serial/earlycon-arm-semihost.c
new file mode 100644
index 000000000000..383db10fbb49
--- /dev/null
+++ b/drivers/tty/serial/earlycon-arm-semihost.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Adapted for ARM and earlycon:
+ * Copyright (C) 2014 Linaro Ltd.
+ * Author: Rob Herring <robh@kernel.org>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define SEMIHOST_SWI	"0xab"
+#else
+#define SEMIHOST_SWI	"0x123456"
+#endif
+
+/*
+ * Semihosting-based debug console
+ */
+static void smh_putc(struct uart_port *port, int c)
+{
+#ifdef CONFIG_ARM64
+	asm volatile("mov  x1, %0\n"
+		     "mov  x0, #3\n"
+		     "hlt  0xf000\n"
+		     : : "r" (&c) : "x0", "x1", "memory");
+#else
+	asm volatile("mov  r1, %0\n"
+		     "mov  r0, #3\n"
+		     "svc  " SEMIHOST_SWI "\n"
+		     : : "r" (&c) : "r0", "r1", "memory");
+#endif
+}
+
+static void smh_write(struct console *con, const char *s, unsigned n)
+{
+	struct earlycon_device *dev = con->data;
+	uart_console_write(&dev->port, s, n, smh_putc);
+}
+
+int __init early_smh_setup(struct earlycon_device *device, const char *opt)
+{
+	device->con->write = smh_write;
+	return 0;
+}
+EARLYCON_DECLARE(smh, early_smh_setup);
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
new file mode 100644
index 000000000000..5131b5ee6164
--- /dev/null
+++ b/drivers/tty/serial/earlycon.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ * Author: Rob Herring <robh@kernel.org>
+ *
+ * Based on 8250 earlycon:
+ * (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/sizes.h>
+#include <linux/mod_devicetable.h>
+
+#ifdef CONFIG_FIX_EARLYCON_MEM
+#include <asm/fixmap.h>
+#endif
+
+#include <asm/serial.h>
+
+static struct console early_con = {
+	.name =		"earlycon",
+	.flags =	CON_PRINTBUFFER | CON_BOOT,
+	.index =	-1,
+};
+
+static struct earlycon_device early_console_dev = {
+	.con = &early_con,
+};
+
+static const struct of_device_id __earlycon_of_table_sentinel
+	__used __section(__earlycon_of_table_end);
+
+static void __iomem * __init earlycon_map(unsigned long paddr, size_t size)
+{
+	void __iomem *base;
+#ifdef CONFIG_FIX_EARLYCON_MEM
+	set_fixmap_io(FIX_EARLYCON_MEM_BASE, paddr & PAGE_MASK);
+	base = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+	base += paddr & ~PAGE_MASK;
+#else
+	base = ioremap(paddr, size);
+#endif
+	if (!base)
+		pr_err("%s: Couldn't map 0x%llx\n", __func__,
+		       (unsigned long long)paddr);
+
+	return base;
+}
+
+static int __init parse_options(struct earlycon_device *device,
+				char *options)
+{
+	struct uart_port *port = &device->port;
+	int mmio, mmio32, length;
+	unsigned long addr;
+
+	if (!options)
+		return -ENODEV;
+
+	mmio = !strncmp(options, "mmio,", 5);
+	mmio32 = !strncmp(options, "mmio32,", 7);
+	if (mmio || mmio32) {
+		port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32);
+		options += mmio ? 5 : 7;
+		addr = simple_strtoul(options, NULL, 0);
+		port->mapbase = addr;
+		if (mmio32)
+			port->regshift = 2;
+	} else if (!strncmp(options, "io,", 3)) {
+		port->iotype = UPIO_PORT;
+		options += 3;
+		addr = simple_strtoul(options, NULL, 0);
+		port->iobase = addr;
+		mmio = 0;
+	} else if (!strncmp(options, "0x", 2)) {
+		port->iotype = UPIO_MEM;
+		addr = simple_strtoul(options, NULL, 0);
+		port->mapbase = addr;
+	} else {
+		return -EINVAL;
+	}
+
+	port->uartclk = BASE_BAUD * 16;
+
+	options = strchr(options, ',');
+	if (options) {
+		options++;
+		device->baud = simple_strtoul(options, NULL, 0);
+		length = min(strcspn(options, " ") + 1,
+			     (size_t)(sizeof(device->options)));
+		strlcpy(device->options, options, length);
+	}
+
+	if (mmio || mmio32)
+		pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n",
+			mmio32 ? "32" : "",
+			(unsigned long long)port->mapbase,
+			device->options);
+	else
+		pr_info("Early serial console at I/O port 0x%lx (options '%s')\n",
+			port->iobase,
+			device->options);
+
+	return 0;
+}
+
+int __init setup_earlycon(char *buf, const char *match,
+			  int (*setup)(struct earlycon_device *, const char *))
+{
+	int err;
+	size_t len;
+	struct uart_port *port = &early_console_dev.port;
+
+	if (!buf || !match || !setup)
+		return 0;
+
+	len = strlen(match);
+	if (strncmp(buf, match, len))
+		return 0;
+	if (buf[len] && (buf[len] != ','))
+		return 0;
+
+	buf += len + 1;
+
+	err = parse_options(&early_console_dev, buf);
+	/* On parsing error, pass the options buf to the setup function */
+	if (!err)
+		buf = NULL;
+
+	if (port->mapbase)
+		port->membase = earlycon_map(port->mapbase, 64);
+
+	early_console_dev.con->data = &early_console_dev;
+	err = setup(&early_console_dev, buf);
+	if (err < 0)
+		return err;
+	if (!early_console_dev.con->write)
+		return -ENODEV;
+
+	register_console(early_console_dev.con);
+	return 0;
+}
+
+int __init of_setup_earlycon(unsigned long addr,
+			     int (*setup)(struct earlycon_device *, const char *))
+{
+	int err;
+	struct uart_port *port = &early_console_dev.port;
+
+	port->iotype = UPIO_MEM;
+	port->mapbase = addr;
+	port->uartclk = BASE_BAUD * 16;
+	port->membase = earlycon_map(addr, SZ_4K);
+
+	early_console_dev.con->data = &early_console_dev;
+	err = setup(&early_console_dev, NULL);
+	if (err < 0)
+		return err;
+	if (!early_console_dev.con->write)
+		return -ENODEV;
+
+
+	register_console(early_console_dev.con);
+	return 0;
+}
diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c
new file mode 100644
index 000000000000..d08eb5d8330d
--- /dev/null
+++ b/drivers/tty/serial/men_z135_uart.c
@@ -0,0 +1,866 @@
+/*
+ * MEN 16z135 High Speed UART
+ *
+ * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
+ * Author: Johannes Thumshirn <johannes.thumshirn@men.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/tty_flip.h>
+#include <linux/bitops.h>
+#include <linux/mcb.h>
+
+#define MEN_Z135_MAX_PORTS		12
+#define MEN_Z135_BASECLK		29491200
+#define MEN_Z135_FIFO_SIZE		1024
+#define MEN_Z135_NUM_MSI_VECTORS	2
+#define MEN_Z135_FIFO_WATERMARK		1020
+
+#define MEN_Z135_STAT_REG		0x0
+#define MEN_Z135_RX_RAM			0x4
+#define MEN_Z135_TX_RAM			0x400
+#define MEN_Z135_RX_CTRL		0x800
+#define MEN_Z135_TX_CTRL		0x804
+#define MEN_Z135_CONF_REG		0x808
+#define MEN_Z135_UART_FREQ		0x80c
+#define MEN_Z135_BAUD_REG		0x810
+#define MENZ135_TIMEOUT			0x814
+
+#define MEN_Z135_MEM_SIZE		0x818
+
+#define IS_IRQ(x) ((x) & 1)
+#define IRQ_ID(x) (((x) >> 1) & 7)
+
+#define MEN_Z135_IER_RXCIEN BIT(0)		/* TX Space IRQ */
+#define MEN_Z135_IER_TXCIEN BIT(1)		/* RX Space IRQ */
+#define MEN_Z135_IER_RLSIEN BIT(2)		/* Receiver Line Status IRQ */
+#define MEN_Z135_IER_MSIEN  BIT(3)		/* Modem Status IRQ */
+#define MEN_Z135_ALL_IRQS (MEN_Z135_IER_RXCIEN		\
+				| MEN_Z135_IER_RLSIEN	\
+				| MEN_Z135_IER_MSIEN	\
+				| MEN_Z135_IER_TXCIEN)
+
+#define MEN_Z135_MCR_DTR	BIT(24)
+#define MEN_Z135_MCR_RTS	BIT(25)
+#define MEN_Z135_MCR_OUT1	BIT(26)
+#define MEN_Z135_MCR_OUT2	BIT(27)
+#define MEN_Z135_MCR_LOOP	BIT(28)
+#define MEN_Z135_MCR_RCFC	BIT(29)
+
+#define MEN_Z135_MSR_DCTS	BIT(0)
+#define MEN_Z135_MSR_DDSR	BIT(1)
+#define MEN_Z135_MSR_DRI	BIT(2)
+#define MEN_Z135_MSR_DDCD	BIT(3)
+#define MEN_Z135_MSR_CTS	BIT(4)
+#define MEN_Z135_MSR_DSR	BIT(5)
+#define MEN_Z135_MSR_RI		BIT(6)
+#define MEN_Z135_MSR_DCD	BIT(7)
+
+#define MEN_Z135_LCR_SHIFT 8	/* LCR shift mask */
+
+#define MEN_Z135_WL5 0		/* CS5 */
+#define MEN_Z135_WL6 1		/* CS6 */
+#define MEN_Z135_WL7 2		/* CS7 */
+#define MEN_Z135_WL8 3		/* CS8 */
+
+#define MEN_Z135_STB_SHIFT 2	/* Stopbits */
+#define MEN_Z135_NSTB1 0
+#define MEN_Z135_NSTB2 1
+
+#define MEN_Z135_PEN_SHIFT 3	/* Parity enable */
+#define MEN_Z135_PAR_DIS 0
+#define MEN_Z135_PAR_ENA 1
+
+#define MEN_Z135_PTY_SHIFT 4	/* Parity type */
+#define MEN_Z135_PTY_ODD 0
+#define MEN_Z135_PTY_EVN 1
+
+#define MEN_Z135_LSR_DR BIT(0)
+#define MEN_Z135_LSR_OE BIT(1)
+#define MEN_Z135_LSR_PE BIT(2)
+#define MEN_Z135_LSR_FE BIT(3)
+#define MEN_Z135_LSR_BI BIT(4)
+#define MEN_Z135_LSR_THEP BIT(5)
+#define MEN_Z135_LSR_TEXP BIT(6)
+#define MEN_Z135_LSR_RXFIFOERR BIT(7)
+
+#define MEN_Z135_IRQ_ID_MST 0
+#define MEN_Z135_IRQ_ID_TSA 1
+#define MEN_Z135_IRQ_ID_RDA 2
+#define MEN_Z135_IRQ_ID_RLS 3
+#define MEN_Z135_IRQ_ID_CTI 6
+
+#define LCR(x) (((x) >> MEN_Z135_LCR_SHIFT) & 0xff)
+
+#define BYTES_TO_ALIGN(x) ((x) & 0x3)
+
+static int line;
+
+static int txlvl = 5;
+module_param(txlvl, int, S_IRUGO);
+MODULE_PARM_DESC(txlvl, "TX IRQ trigger level 0-7, default 5 (128 byte)");
+
+static int rxlvl = 6;
+module_param(rxlvl, int, S_IRUGO);
+MODULE_PARM_DESC(rxlvl, "RX IRQ trigger level 0-7, default 6 (256 byte)");
+
+static int align;
+module_param(align, int, S_IRUGO);
+MODULE_PARM_DESC(align, "Keep hardware FIFO write pointer aligned, default 0");
+
+struct men_z135_port {
+	struct uart_port port;
+	struct mcb_device *mdev;
+	unsigned char *rxbuf;
+	u32 stat_reg;
+	spinlock_t lock;
+};
+#define to_men_z135(port) container_of((port), struct men_z135_port, port)
+
+/**
+ * men_z135_reg_set() - Set value in register
+ * @uart: The UART port
+ * @addr: Register address
+ * @val: value to set
+ */
+static inline void men_z135_reg_set(struct men_z135_port *uart,
+				u32 addr, u32 val)
+{
+	struct uart_port *port = &uart->port;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&uart->lock, flags);
+
+	reg = ioread32(port->membase + addr);
+	reg |= val;
+	iowrite32(reg, port->membase + addr);
+
+	spin_unlock_irqrestore(&uart->lock, flags);
+}
+
+/**
+ * men_z135_reg_clr() - Unset value in register
+ * @uart: The UART port
+ * @addr: Register address
+ * @val: value to clear
+ */
+static inline void men_z135_reg_clr(struct men_z135_port *uart,
+				u32 addr, u32 val)
+{
+	struct uart_port *port = &uart->port;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&uart->lock, flags);
+
+	reg = ioread32(port->membase + addr);
+	reg &= ~val;
+	iowrite32(reg, port->membase + addr);
+
+	spin_unlock_irqrestore(&uart->lock, flags);
+}
+
+/**
+ * men_z135_handle_modem_status() - Handle change of modem status
+ * @port: The UART port
+ *
+ * Handle change of modem status register. This is done by reading the "delta"
+ * versions of DCD (Data Carrier Detect) and CTS (Clear To Send).
+ */
+static void men_z135_handle_modem_status(struct men_z135_port *uart)
+{
+	if (uart->stat_reg & MEN_Z135_MSR_DDCD)
+		uart_handle_dcd_change(&uart->port,
+				uart->stat_reg & ~MEN_Z135_MSR_DCD);
+	if (uart->stat_reg & MEN_Z135_MSR_DCTS)
+		uart_handle_cts_change(&uart->port,
+				uart->stat_reg & ~MEN_Z135_MSR_CTS);
+}
+
+static void men_z135_handle_lsr(struct men_z135_port *uart)
+{
+	struct uart_port *port = &uart->port;
+	u8 lsr;
+
+	lsr = (uart->stat_reg >> 16) & 0xff;
+
+	if (lsr & MEN_Z135_LSR_OE)
+		port->icount.overrun++;
+	if (lsr & MEN_Z135_LSR_PE)
+		port->icount.parity++;
+	if (lsr & MEN_Z135_LSR_FE)
+		port->icount.frame++;
+	if (lsr & MEN_Z135_LSR_BI) {
+		port->icount.brk++;
+		uart_handle_break(port);
+	}
+}
+
+/**
+ * get_rx_fifo_content() - Get the number of bytes in RX FIFO
+ * @uart: The UART port
+ *
+ * Read RXC register from hardware and return current FIFO fill size.
+ */
+static u16 get_rx_fifo_content(struct men_z135_port *uart)
+{
+	struct uart_port *port = &uart->port;
+	u32 stat_reg;
+	u16 rxc;
+	u8 rxc_lo;
+	u8 rxc_hi;
+
+	stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
+	rxc_lo = stat_reg >> 24;
+	rxc_hi = (stat_reg & 0xC0) >> 6;
+
+	rxc = rxc_lo | (rxc_hi << 8);
+
+	return rxc;
+}
+
+/**
+ * men_z135_handle_rx() - RX tasklet routine
+ * @arg: Pointer to struct men_z135_port
+ *
+ * Copy from RX FIFO and acknowledge number of bytes copied.
+ */
+static void men_z135_handle_rx(struct men_z135_port *uart)
+{
+	struct uart_port *port = &uart->port;
+	struct tty_port *tport = &port->state->port;
+	int copied;
+	u16 size;
+	int room;
+
+	size = get_rx_fifo_content(uart);
+
+	if (size == 0)
+		return;
+
+	/* Avoid accidently accessing TX FIFO instead of RX FIFO. Last
+	 * longword in RX FIFO cannot be read.(0x004-0x3FF)
+	 */
+	if (size > MEN_Z135_FIFO_WATERMARK)
+		size = MEN_Z135_FIFO_WATERMARK;
+
+	room = tty_buffer_request_room(tport, size);
+	if (room != size)
+		dev_warn(&uart->mdev->dev,
+			"Not enough room in flip buffer, truncating to %d\n",
+			room);
+
+	if (room == 0)
+		return;
+
+	memcpy_fromio(uart->rxbuf, port->membase + MEN_Z135_RX_RAM, room);
+	/* Be sure to first copy all data and then acknowledge it */
+	mb();
+	iowrite32(room, port->membase +  MEN_Z135_RX_CTRL);
+
+	copied = tty_insert_flip_string(tport, uart->rxbuf, room);
+	if (copied != room)
+		dev_warn(&uart->mdev->dev,
+			"Only copied %d instead of %d bytes\n",
+			copied, room);
+
+	port->icount.rx += copied;
+
+	tty_flip_buffer_push(tport);
+
+}
+
+/**
+ * men_z135_handle_tx() - TX tasklet routine
+ * @arg: Pointer to struct men_z135_port
+ *
+ */
+static void men_z135_handle_tx(struct men_z135_port *uart)
+{
+	struct uart_port *port = &uart->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	u32 txc;
+	u32 wptr;
+	int qlen;
+	int n;
+	int txfree;
+	int head;
+	int tail;
+	int s;
+
+	if (uart_circ_empty(xmit))
+		goto out;
+
+	if (uart_tx_stopped(port))
+		goto out;
+
+	if (port->x_char)
+		goto out;
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	/* calculate bytes to copy */
+	qlen = uart_circ_chars_pending(xmit);
+	if (qlen <= 0)
+		goto out;
+
+	wptr = ioread32(port->membase + MEN_Z135_TX_CTRL);
+	txc = (wptr >> 16) & 0x3ff;
+	wptr &= 0x3ff;
+
+	if (txc > MEN_Z135_FIFO_WATERMARK)
+		txc = MEN_Z135_FIFO_WATERMARK;
+
+	txfree = MEN_Z135_FIFO_WATERMARK - txc;
+	if (txfree <= 0) {
+		pr_err("Not enough room in TX FIFO have %d, need %d\n",
+			txfree, qlen);
+		goto irq_en;
+	}
+
+	/* if we're not aligned, it's better to copy only 1 or 2 bytes and
+	 * then the rest.
+	 */
+	if (align && qlen >= 3 && BYTES_TO_ALIGN(wptr))
+		n = 4 - BYTES_TO_ALIGN(wptr);
+	else if (qlen > txfree)
+		n = txfree;
+	else
+		n = qlen;
+
+	if (n <= 0)
+		goto irq_en;
+
+	head = xmit->head & (UART_XMIT_SIZE - 1);
+	tail = xmit->tail & (UART_XMIT_SIZE - 1);
+
+	s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail;
+	n = min(n, s);
+
+	memcpy_toio(port->membase + MEN_Z135_TX_RAM, &xmit->buf[xmit->tail], n);
+	xmit->tail = (xmit->tail + n) & (UART_XMIT_SIZE - 1);
+	mmiowb();
+
+	iowrite32(n & 0x3ff, port->membase + MEN_Z135_TX_CTRL);
+
+	port->icount.tx += n;
+
+irq_en:
+	if (!uart_circ_empty(xmit))
+		men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
+	else
+		men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
+
+out:
+	return;
+
+}
+
+/**
+ * men_z135_intr() - Handle legacy IRQs
+ * @irq: The IRQ number
+ * @data: Pointer to UART port
+ *
+ * Check IIR register to see which tasklet to start.
+ */
+static irqreturn_t men_z135_intr(int irq, void *data)
+{
+	struct men_z135_port *uart = (struct men_z135_port *)data;
+	struct uart_port *port = &uart->port;
+	int irq_id;
+
+	uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
+	/* IRQ pending is low active */
+	if (IS_IRQ(uart->stat_reg))
+		return IRQ_NONE;
+
+	irq_id = IRQ_ID(uart->stat_reg);
+	switch (irq_id) {
+	case MEN_Z135_IRQ_ID_MST:
+		men_z135_handle_modem_status(uart);
+		break;
+	case MEN_Z135_IRQ_ID_TSA:
+		men_z135_handle_tx(uart);
+		break;
+	case MEN_Z135_IRQ_ID_CTI:
+		dev_dbg(&uart->mdev->dev, "Character Timeout Indication\n");
+		/* Fallthrough */
+	case MEN_Z135_IRQ_ID_RDA:
+		/* Reading data clears RX IRQ */
+		men_z135_handle_rx(uart);
+		break;
+	case MEN_Z135_IRQ_ID_RLS:
+		men_z135_handle_lsr(uart);
+		break;
+	default:
+		dev_warn(&uart->mdev->dev, "Unknown IRQ id %d\n", irq_id);
+		return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * men_z135_request_irq() - Request IRQ for 16z135 core
+ * @uart: z135 private uart port structure
+ *
+ * Request an IRQ for 16z135 to use. First try using MSI, if it fails
+ * fall back to using legacy interrupts.
+ */
+static int men_z135_request_irq(struct men_z135_port *uart)
+{
+	struct device *dev = &uart->mdev->dev;
+	struct uart_port *port = &uart->port;
+	int err = 0;
+
+	err = request_irq(port->irq, men_z135_intr, IRQF_SHARED,
+			"men_z135_intr", uart);
+	if (err)
+		dev_err(dev, "Error %d getting interrupt\n", err);
+
+	return err;
+}
+
+/**
+ * men_z135_tx_empty() - Handle tx_empty call
+ * @port: The UART port
+ *
+ * This function tests whether the TX FIFO and shifter for the port
+ * described by @port is empty.
+ */
+static unsigned int men_z135_tx_empty(struct uart_port *port)
+{
+	u32 wptr;
+	u16 txc;
+
+	wptr = ioread32(port->membase + MEN_Z135_TX_CTRL);
+	txc = (wptr >> 16) & 0x3ff;
+
+	if (txc == 0)
+		return TIOCSER_TEMT;
+	else
+		return 0;
+}
+
+/**
+ * men_z135_set_mctrl() - Set modem control lines
+ * @port: The UART port
+ * @mctrl: The modem control lines
+ *
+ * This function sets the modem control lines for a port described by @port
+ * to the state described by @mctrl
+ */
+static void men_z135_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+	u32 conf_reg = 0;
+
+	if (mctrl & TIOCM_RTS)
+		conf_reg |= MEN_Z135_MCR_RTS;
+	if (mctrl & TIOCM_DTR)
+		conf_reg |= MEN_Z135_MCR_DTR;
+	if (mctrl & TIOCM_OUT1)
+		conf_reg |= MEN_Z135_MCR_OUT1;
+	if (mctrl & TIOCM_OUT2)
+		conf_reg |= MEN_Z135_MCR_OUT2;
+	if (mctrl & TIOCM_LOOP)
+		conf_reg |= MEN_Z135_MCR_LOOP;
+
+	men_z135_reg_set(uart, MEN_Z135_CONF_REG, conf_reg);
+}
+
+/**
+ * men_z135_get_mctrl() - Get modem control lines
+ * @port: The UART port
+ *
+ * Retruns the current state of modem control inputs.
+ */
+static unsigned int men_z135_get_mctrl(struct uart_port *port)
+{
+	unsigned int mctrl = 0;
+	u32 stat_reg;
+	u8 msr;
+
+	stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
+
+	msr = ~((stat_reg >> 8) & 0xff);
+
+	if (msr & MEN_Z135_MSR_CTS)
+		mctrl |= TIOCM_CTS;
+	if (msr & MEN_Z135_MSR_DSR)
+		mctrl |= TIOCM_DSR;
+	if (msr & MEN_Z135_MSR_RI)
+		mctrl |= TIOCM_RI;
+	if (msr & MEN_Z135_MSR_DCD)
+		mctrl |= TIOCM_CAR;
+
+	return mctrl;
+}
+
+/**
+ * men_z135_stop_tx() - Stop transmitting characters
+ * @port: The UART port
+ *
+ * Stop transmitting characters. This might be due to CTS line becomming
+ * inactive or the tty layer indicating we want to stop transmission due to
+ * an XOFF character.
+ */
+static void men_z135_stop_tx(struct uart_port *port)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+
+	men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
+}
+
+/**
+ * men_z135_start_tx() - Start transmitting characters
+ * @port: The UART port
+ *
+ * Start transmitting character. This actually doesn't transmit anything, but
+ * fires off the TX tasklet.
+ */
+static void men_z135_start_tx(struct uart_port *port)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+
+	men_z135_handle_tx(uart);
+}
+
+/**
+ * men_z135_stop_rx() - Stop receiving characters
+ * @port: The UART port
+ *
+ * Stop receiving characters; the port is in the process of being closed.
+ */
+static void men_z135_stop_rx(struct uart_port *port)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+
+	men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_RXCIEN);
+}
+
+/**
+ * men_z135_enable_ms() - Enable Modem Status
+ * port:
+ *
+ * Enable Modem Status IRQ.
+ */
+static void men_z135_enable_ms(struct uart_port *port)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+
+	men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN);
+}
+
+static int men_z135_startup(struct uart_port *port)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+	int err;
+	u32 conf_reg = 0;
+
+	err = men_z135_request_irq(uart);
+	if (err)
+		return -ENODEV;
+
+	conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG);
+
+	conf_reg |= MEN_Z135_ALL_IRQS;
+	conf_reg &= ~(0xff << 16);
+	conf_reg |= (txlvl << 16);
+	conf_reg |= (rxlvl << 20);
+
+	iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
+
+	return 0;
+}
+
+static void men_z135_shutdown(struct uart_port *port)
+{
+	struct men_z135_port *uart = to_men_z135(port);
+	u32 conf_reg = 0;
+
+	conf_reg |= MEN_Z135_ALL_IRQS;
+
+	men_z135_reg_clr(uart, MEN_Z135_CONF_REG, conf_reg);
+
+	free_irq(uart->port.irq, uart);
+}
+
+static void men_z135_set_termios(struct uart_port *port,
+				struct ktermios *termios,
+				struct ktermios *old)
+{
+	unsigned int baud;
+	u32 conf_reg;
+	u32 bd_reg;
+	u32 uart_freq;
+	u8 lcr;
+
+	conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG);
+	lcr = LCR(conf_reg);
+
+	/* byte size */
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		lcr |= MEN_Z135_WL5;
+		break;
+	case CS6:
+		lcr |= MEN_Z135_WL6;
+		break;
+	case CS7:
+		lcr |= MEN_Z135_WL7;
+		break;
+	case CS8:
+		lcr |= MEN_Z135_WL8;
+		break;
+	}
+
+	/* stop bits */
+	if (termios->c_cflag & CSTOPB)
+		lcr |= MEN_Z135_NSTB2 << MEN_Z135_STB_SHIFT;
+
+	/* parity */
+	if (termios->c_cflag & PARENB) {
+		lcr |= MEN_Z135_PAR_ENA << MEN_Z135_PEN_SHIFT;
+
+		if (termios->c_cflag & PARODD)
+			lcr |= MEN_Z135_PTY_ODD << MEN_Z135_PTY_SHIFT;
+		else
+			lcr |= MEN_Z135_PTY_EVN << MEN_Z135_PTY_SHIFT;
+	} else
+		lcr |= MEN_Z135_PAR_DIS << MEN_Z135_PEN_SHIFT;
+
+	termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
+
+	conf_reg |= lcr << MEN_Z135_LCR_SHIFT;
+	iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
+
+	uart_freq = ioread32(port->membase + MEN_Z135_UART_FREQ);
+	if (uart_freq == 0)
+		uart_freq = MEN_Z135_BASECLK;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, uart_freq / 16);
+
+	spin_lock(&port->lock);
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, baud, baud);
+
+	bd_reg = uart_freq / (4 * baud);
+	iowrite32(bd_reg, port->membase + MEN_Z135_BAUD_REG);
+
+	uart_update_timeout(port, termios->c_cflag, baud);
+	spin_unlock(&port->lock);
+}
+
+static const char *men_z135_type(struct uart_port *port)
+{
+	return KBUILD_MODNAME;
+}
+
+static void men_z135_release_port(struct uart_port *port)
+{
+	iounmap(port->membase);
+	port->membase = NULL;
+
+	release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE);
+}
+
+static int men_z135_request_port(struct uart_port *port)
+{
+	int size = MEN_Z135_MEM_SIZE;
+
+	if (!request_mem_region(port->mapbase, size, "men_z135_port"))
+		return -EBUSY;
+
+	port->membase = ioremap(port->mapbase, MEN_Z135_MEM_SIZE);
+	if (port->membase == NULL) {
+		release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void men_z135_config_port(struct uart_port *port, int type)
+{
+	port->type = PORT_MEN_Z135;
+	men_z135_request_port(port);
+}
+
+static int men_z135_verify_port(struct uart_port *port,
+				struct serial_struct *serinfo)
+{
+	return -EINVAL;
+}
+
+static struct uart_ops men_z135_ops = {
+	.tx_empty = men_z135_tx_empty,
+	.set_mctrl = men_z135_set_mctrl,
+	.get_mctrl = men_z135_get_mctrl,
+	.stop_tx = men_z135_stop_tx,
+	.start_tx = men_z135_start_tx,
+	.stop_rx = men_z135_stop_rx,
+	.enable_ms = men_z135_enable_ms,
+	.startup = men_z135_startup,
+	.shutdown = men_z135_shutdown,
+	.set_termios = men_z135_set_termios,
+	.type = men_z135_type,
+	.release_port = men_z135_release_port,
+	.request_port = men_z135_request_port,
+	.config_port = men_z135_config_port,
+	.verify_port = men_z135_verify_port,
+};
+
+static struct uart_driver men_z135_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = KBUILD_MODNAME,
+	.dev_name = "ttyHSU",
+	.major = 0,
+	.minor = 0,
+	.nr = MEN_Z135_MAX_PORTS,
+};
+
+/**
+ * men_z135_probe() - Probe a z135 instance
+ * @mdev: The MCB device
+ * @id: The MCB device ID
+ *
+ * men_z135_probe does the basic setup of hardware resources and registers the
+ * new uart port to the tty layer.
+ */
+static int men_z135_probe(struct mcb_device *mdev,
+			const struct mcb_device_id *id)
+{
+	struct men_z135_port *uart;
+	struct resource *mem;
+	struct device *dev;
+	int err;
+
+	dev = &mdev->dev;
+
+	uart = devm_kzalloc(dev, sizeof(struct men_z135_port), GFP_KERNEL);
+	if (!uart)
+		return -ENOMEM;
+
+	uart->rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
+	if (!uart->rxbuf)
+		return -ENOMEM;
+
+	mem = &mdev->mem;
+
+	mcb_set_drvdata(mdev, uart);
+
+	uart->port.uartclk = MEN_Z135_BASECLK * 16;
+	uart->port.fifosize = MEN_Z135_FIFO_SIZE;
+	uart->port.iotype = UPIO_MEM;
+	uart->port.ops = &men_z135_ops;
+	uart->port.irq = mcb_get_irq(mdev);
+	uart->port.iotype = UPIO_MEM;
+	uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+	uart->port.line = line++;
+	uart->port.dev = dev;
+	uart->port.type = PORT_MEN_Z135;
+	uart->port.mapbase = mem->start;
+	uart->port.membase = NULL;
+	uart->mdev = mdev;
+
+	spin_lock_init(&uart->port.lock);
+	spin_lock_init(&uart->lock);
+
+	err = uart_add_one_port(&men_z135_driver, &uart->port);
+	if (err)
+		goto err;
+
+	return 0;
+
+err:
+	free_page((unsigned long) uart->rxbuf);
+	dev_err(dev, "Failed to add UART: %d\n", err);
+
+	return err;
+}
+
+/**
+ * men_z135_remove() - Remove a z135 instance from the system
+ *
+ * @mdev: The MCB device
+ */
+static void men_z135_remove(struct mcb_device *mdev)
+{
+	struct men_z135_port *uart = mcb_get_drvdata(mdev);
+
+	line--;
+	uart_remove_one_port(&men_z135_driver, &uart->port);
+	free_page((unsigned long) uart->rxbuf);
+}
+
+static const struct mcb_device_id men_z135_ids[] = {
+	{ .device = 0x87 },
+};
+MODULE_DEVICE_TABLE(mcb, men_z135_ids);
+
+static struct mcb_driver mcb_driver = {
+	.driver = {
+		.name = "z135-uart",
+		.owner = THIS_MODULE,
+	},
+	.probe = men_z135_probe,
+	.remove = men_z135_remove,
+	.id_table = men_z135_ids,
+};
+
+/**
+ * men_z135_init() - Driver Registration Routine
+ *
+ * men_z135_init is the first routine called when the driver is loaded. All it
+ * does is register with the legacy MEN Chameleon subsystem.
+ */
+static int __init men_z135_init(void)
+{
+	int err;
+
+	err = uart_register_driver(&men_z135_driver);
+	if (err) {
+		pr_err("Failed to register UART: %d\n", err);
+		return err;
+	}
+
+	err = mcb_register_driver(&mcb_driver);
+	if  (err) {
+		pr_err("Failed to register MCB driver: %d\n", err);
+		uart_unregister_driver(&men_z135_driver);
+		return err;
+	}
+
+	return 0;
+}
+module_init(men_z135_init);
+
+/**
+ * men_z135_exit() - Driver Exit Routine
+ *
+ * men_z135_exit is called just before the driver is removed from memory.
+ */
+static void __exit men_z135_exit(void)
+{
+	mcb_unregister_driver(&mcb_driver);
+	uart_unregister_driver(&men_z135_driver);
+}
+module_exit(men_z135_exit);
+
+MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MEN 16z135 High Speed UART");
+MODULE_ALIAS("mcb:16z135");
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 7fd6aaaacd8e..be127d0da32c 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -29,7 +29,7 @@
 #include <asm/irq.h>
 #include <asm/parisc-device.h>
 
-#ifdef CONFIG_MAGIC_SYSRQ
+#if defined(CONFIG_SERIAL_MUX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #include <linux/sysrq.h>
 #define SUPPORT_SYSRQ
 #endif
@@ -613,7 +613,7 @@ static void __exit mux_exit(void)
 {
 	/* Delete the Mux timer. */
 	if(port_cnt > 0) {
-		del_timer(&mux_timer);
+		del_timer_sync(&mux_timer);
 #ifdef CONFIG_SERIAL_MUX_CONSOLE
 		unregister_console(&mux_console);
 #endif
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 08b6b9419f0d..d017cec8a34a 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -163,10 +163,6 @@ struct uart_omap_port {
 	u8			wakeups_enabled;
 	u32			features;
 
-	int			DTR_gpio;
-	int			DTR_inverted;
-	int			DTR_active;
-
 	struct serial_rs485	rs485;
 	int			rts_gpio;
 
@@ -184,8 +180,6 @@ static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
 /* Forward declaration of functions */
 static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1);
 
-static struct workqueue_struct *serial_omap_uart_wq;
-
 static inline unsigned int serial_in(struct uart_omap_port *up, int offset)
 {
 	offset <<= up->port.regshift;
@@ -398,11 +392,8 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr)
 			break;
 	} while (--count > 0);
 
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
-		spin_unlock(&up->port.lock);
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(&up->port);
-		spin_lock(&up->port.lock);
-	}
 
 	if (uart_circ_empty(xmit))
 		serial_omap_stop_tx(&up->port);
@@ -697,16 +688,6 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	serial_out(up, UART_MCR, up->mcr);
 	pm_runtime_mark_last_busy(up->dev);
 	pm_runtime_put_autosuspend(up->dev);
-
-	if (gpio_is_valid(up->DTR_gpio) &&
-	    !!(mctrl & TIOCM_DTR) != up->DTR_active) {
-		up->DTR_active = !up->DTR_active;
-		if (gpio_cansleep(up->DTR_gpio))
-			schedule_work(&up->qos_work);
-		else
-			gpio_set_value(up->DTR_gpio,
-				       up->DTR_active != up->DTR_inverted);
-	}
 }
 
 static void serial_omap_break_ctl(struct uart_port *port, int break_state)
@@ -850,9 +831,6 @@ static void serial_omap_uart_qos_work(struct work_struct *work)
 						qos_work);
 
 	pm_qos_update_request(&up->pm_qos_request, up->latency);
-	if (gpio_is_valid(up->DTR_gpio))
-		gpio_set_value_cansleep(up->DTR_gpio,
-					up->DTR_active != up->DTR_inverted);
 }
 
 static void
@@ -1420,7 +1398,7 @@ serial_omap_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
 
 	switch (cmd) {
 	case TIOCSRS485:
-		if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg,
+		if (copy_from_user(&rs485conf, (void __user *) arg,
 					sizeof(rs485conf)))
 			return -EFAULT;
 
@@ -1428,7 +1406,7 @@ serial_omap_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
 		break;
 
 	case TIOCGRS485:
-		if (copy_to_user((struct serial_rs485 *) arg,
+		if (copy_to_user((void __user *) arg,
 					&(to_uart_omap_port(port)->rs485),
 					sizeof(rs485conf)))
 			return -EFAULT;
@@ -1614,7 +1592,7 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
 	/* check for tx enable gpio */
 	up->rts_gpio = of_get_named_gpio_flags(np, "rts-gpio", 0, &flags);
 	if (gpio_is_valid(up->rts_gpio)) {
-		ret = gpio_request(up->rts_gpio, "omap-serial");
+		ret = devm_gpio_request(up->dev, up->rts_gpio, "omap-serial");
 		if (ret < 0)
 			return ret;
 		ret = gpio_direction_output(up->rts_gpio,
@@ -1644,10 +1622,13 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
 
 static int serial_omap_probe(struct platform_device *pdev)
 {
-	struct uart_omap_port	*up;
-	struct resource		*mem, *irq;
 	struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev);
-	int ret, uartirq = 0, wakeirq = 0;
+	struct uart_omap_port *up;
+	struct resource *mem;
+	void __iomem *base;
+	int uartirq = 0;
+	int wakeirq = 0;
+	int ret;
 
 	/* The optional wakeirq may be specified in the board dts file */
 	if (pdev->dev.of_node) {
@@ -1658,48 +1639,19 @@ static int serial_omap_probe(struct platform_device *pdev)
 		omap_up_info = of_get_uart_port_info(&pdev->dev);
 		pdev->dev.platform_data = omap_up_info;
 	} else {
-		irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-		if (!irq) {
-			dev_err(&pdev->dev, "no irq resource?\n");
-			return -ENODEV;
-		}
-		uartirq = irq->start;
-	}
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "no mem resource?\n");
-		return -ENODEV;
-	}
-
-	if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
-				pdev->dev.driver->name)) {
-		dev_err(&pdev->dev, "memory region already claimed\n");
-		return -EBUSY;
-	}
-
-	if (gpio_is_valid(omap_up_info->DTR_gpio) &&
-	    omap_up_info->DTR_present) {
-		ret = gpio_request(omap_up_info->DTR_gpio, "omap-serial");
-		if (ret < 0)
-			return ret;
-		ret = gpio_direction_output(omap_up_info->DTR_gpio,
-					    omap_up_info->DTR_inverted);
-		if (ret < 0)
-			return ret;
+		uartirq = platform_get_irq(pdev, 0);
+		if (uartirq < 0)
+			return -EPROBE_DEFER;
 	}
 
 	up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL);
 	if (!up)
 		return -ENOMEM;
 
-	if (gpio_is_valid(omap_up_info->DTR_gpio) &&
-	    omap_up_info->DTR_present) {
-		up->DTR_gpio = omap_up_info->DTR_gpio;
-		up->DTR_inverted = omap_up_info->DTR_inverted;
-	} else
-		up->DTR_gpio = -EINVAL;
-	up->DTR_active = 0;
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
 
 	up->dev = &pdev->dev;
 	up->port.dev = &pdev->dev;
@@ -1733,14 +1685,7 @@ static int serial_omap_probe(struct platform_device *pdev)
 
 	sprintf(up->name, "OMAP UART%d", up->port.line);
 	up->port.mapbase = mem->start;
-	up->port.membase = devm_ioremap(&pdev->dev, mem->start,
-						resource_size(mem));
-	if (!up->port.membase) {
-		dev_err(&pdev->dev, "can't ioremap UART\n");
-		ret = -ENOMEM;
-		goto err_ioremap;
-	}
-
+	up->port.membase = base;
 	up->port.flags = omap_up_info->flags;
 	up->port.uartclk = omap_up_info->uartclk;
 	if (!up->port.uartclk) {
@@ -1754,12 +1699,12 @@ static int serial_omap_probe(struct platform_device *pdev)
 	up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
 	pm_qos_add_request(&up->pm_qos_request,
 		PM_QOS_CPU_DMA_LATENCY, up->latency);
-	serial_omap_uart_wq = create_singlethread_workqueue(up->name);
 	INIT_WORK(&up->qos_work, serial_omap_uart_qos_work);
 
 	platform_set_drvdata(pdev, up);
 	if (omap_up_info->autosuspend_timeout == 0)
 		omap_up_info->autosuspend_timeout = -1;
+
 	device_init_wakeup(up->dev, true);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev,
@@ -1786,7 +1731,6 @@ static int serial_omap_probe(struct platform_device *pdev)
 err_add_port:
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-err_ioremap:
 err_rs485:
 err_port_line:
 	dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 0931b3fe9edf..0cb6a8e52bd0 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -257,6 +257,8 @@ struct eg20t_port {
 	dma_addr_t			rx_buf_dma;
 
 	struct dentry	*debugfs;
+#define IRQ_NAME_SIZE 17
+	char				irq_name[IRQ_NAME_SIZE];
 
 	/* protect the eg20t_port private structure and io access to membase */
 	spinlock_t lock;
@@ -1343,7 +1345,7 @@ static int pch_uart_startup(struct uart_port *port)
 		return ret;
 
 	ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED,
-			KBUILD_MODNAME, priv);
+			priv->irq_name, priv);
 	if (ret < 0)
 		return ret;
 
@@ -1588,13 +1590,8 @@ static void pch_uart_put_poll_char(struct uart_port *port,
 	wait_for_xmitr(priv, UART_LSR_THRE);
 	/*
 	 * Send the character out.
-	 * If a LF, also do CR...
 	 */
 	iowrite8(c, priv->membase + PCH_UART_THR);
-	if (c == 10) {
-		wait_for_xmitr(priv, UART_LSR_THRE);
-		iowrite8(13, priv->membase + PCH_UART_THR);
-	}
 
 	/*
 	 * Finally, wait for transmitter to become empty
@@ -1818,6 +1815,10 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	priv->port.line = board->line_no;
 	priv->trigger = PCH_UART_HAL_TRIGGER_M;
 
+	snprintf(priv->irq_name, IRQ_NAME_SIZE,
+		 KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d",
+		 priv->port.line);
+
 	spin_lock_init(&priv->port.lock);
 
 	pci_set_drvdata(pdev, priv);
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index f9f20f383760..9e7ee39f8b2a 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -711,13 +711,8 @@ static void serial_pxa_put_poll_char(struct uart_port *port,
 	wait_for_xmitr(up);
 	/*
 	 *	Send the character out.
-	 *	If a LF, also do CR...
 	 */
 	serial_out(up, UART_TX, c);
-	if (c == 10) {
-		wait_for_xmitr(up);
-		serial_out(up, UART_TX, 13);
-	}
 
 	/*
 	 *	Finally, wait for transmitter to become empty
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
new file mode 100644
index 000000000000..7206a64f3ff7
--- /dev/null
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -0,0 +1,1280 @@
+/*
+ * SC16IS7xx tty serial driver - Copyright (C) 2014 GridPoint
+ * Author: Jon Ringle <jringle@gridpoint.com>
+ *
+ *  Based on max310x.c, by Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/uaccess.h>
+
+#define SC16IS7XX_NAME			"sc16is7xx"
+
+/* SC16IS7XX register definitions */
+#define SC16IS7XX_RHR_REG		(0x00) /* RX FIFO */
+#define SC16IS7XX_THR_REG		(0x00) /* TX FIFO */
+#define SC16IS7XX_IER_REG		(0x01) /* Interrupt enable */
+#define SC16IS7XX_IIR_REG		(0x02) /* Interrupt Identification */
+#define SC16IS7XX_FCR_REG		(0x02) /* FIFO control */
+#define SC16IS7XX_LCR_REG		(0x03) /* Line Control */
+#define SC16IS7XX_MCR_REG		(0x04) /* Modem Control */
+#define SC16IS7XX_LSR_REG		(0x05) /* Line Status */
+#define SC16IS7XX_MSR_REG		(0x06) /* Modem Status */
+#define SC16IS7XX_SPR_REG		(0x07) /* Scratch Pad */
+#define SC16IS7XX_TXLVL_REG		(0x08) /* TX FIFO level */
+#define SC16IS7XX_RXLVL_REG		(0x09) /* RX FIFO level */
+#define SC16IS7XX_IODIR_REG		(0x0a) /* I/O Direction
+						* - only on 75x/76x
+						*/
+#define SC16IS7XX_IOSTATE_REG		(0x0b) /* I/O State
+						* - only on 75x/76x
+						*/
+#define SC16IS7XX_IOINTENA_REG		(0x0c) /* I/O Interrupt Enable
+						* - only on 75x/76x
+						*/
+#define SC16IS7XX_IOCONTROL_REG		(0x0e) /* I/O Control
+						* - only on 75x/76x
+						*/
+#define SC16IS7XX_EFCR_REG		(0x0f) /* Extra Features Control */
+
+/* TCR/TLR Register set: Only if ((MCR[2] == 1) && (EFR[4] == 1)) */
+#define SC16IS7XX_TCR_REG		(0x06) /* Transmit control */
+#define SC16IS7XX_TLR_REG		(0x07) /* Trigger level */
+
+/* Special Register set: Only if ((LCR[7] == 1) && (LCR != 0xBF)) */
+#define SC16IS7XX_DLL_REG		(0x00) /* Divisor Latch Low */
+#define SC16IS7XX_DLH_REG		(0x01) /* Divisor Latch High */
+
+/* Enhanced Register set: Only if (LCR == 0xBF) */
+#define SC16IS7XX_EFR_REG		(0x02) /* Enhanced Features */
+#define SC16IS7XX_XON1_REG		(0x04) /* Xon1 word */
+#define SC16IS7XX_XON2_REG		(0x05) /* Xon2 word */
+#define SC16IS7XX_XOFF1_REG		(0x06) /* Xoff1 word */
+#define SC16IS7XX_XOFF2_REG		(0x07) /* Xoff2 word */
+
+/* IER register bits */
+#define SC16IS7XX_IER_RDI_BIT		(1 << 0) /* Enable RX data interrupt */
+#define SC16IS7XX_IER_THRI_BIT		(1 << 1) /* Enable TX holding register
+						  * interrupt */
+#define SC16IS7XX_IER_RLSI_BIT		(1 << 2) /* Enable RX line status
+						  * interrupt */
+#define SC16IS7XX_IER_MSI_BIT		(1 << 3) /* Enable Modem status
+						  * interrupt */
+
+/* IER register bits - write only if (EFR[4] == 1) */
+#define SC16IS7XX_IER_SLEEP_BIT		(1 << 4) /* Enable Sleep mode */
+#define SC16IS7XX_IER_XOFFI_BIT		(1 << 5) /* Enable Xoff interrupt */
+#define SC16IS7XX_IER_RTSI_BIT		(1 << 6) /* Enable nRTS interrupt */
+#define SC16IS7XX_IER_CTSI_BIT		(1 << 7) /* Enable nCTS interrupt */
+
+/* FCR register bits */
+#define SC16IS7XX_FCR_FIFO_BIT		(1 << 0) /* Enable FIFO */
+#define SC16IS7XX_FCR_RXRESET_BIT	(1 << 1) /* Reset RX FIFO */
+#define SC16IS7XX_FCR_TXRESET_BIT	(1 << 2) /* Reset TX FIFO */
+#define SC16IS7XX_FCR_RXLVLL_BIT	(1 << 6) /* RX Trigger level LSB */
+#define SC16IS7XX_FCR_RXLVLH_BIT	(1 << 7) /* RX Trigger level MSB */
+
+/* FCR register bits - write only if (EFR[4] == 1) */
+#define SC16IS7XX_FCR_TXLVLL_BIT	(1 << 4) /* TX Trigger level LSB */
+#define SC16IS7XX_FCR_TXLVLH_BIT	(1 << 5) /* TX Trigger level MSB */
+
+/* IIR register bits */
+#define SC16IS7XX_IIR_NO_INT_BIT	(1 << 0) /* No interrupts pending */
+#define SC16IS7XX_IIR_ID_MASK		0x3e     /* Mask for the interrupt ID */
+#define SC16IS7XX_IIR_THRI_SRC		0x02     /* TX holding register empty */
+#define SC16IS7XX_IIR_RDI_SRC		0x04     /* RX data interrupt */
+#define SC16IS7XX_IIR_RLSE_SRC		0x06     /* RX line status error */
+#define SC16IS7XX_IIR_RTOI_SRC		0x0c     /* RX time-out interrupt */
+#define SC16IS7XX_IIR_MSI_SRC		0x00     /* Modem status interrupt
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_IIR_INPIN_SRC		0x30     /* Input pin change of state
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_IIR_XOFFI_SRC		0x10     /* Received Xoff */
+#define SC16IS7XX_IIR_CTSRTS_SRC	0x20     /* nCTS,nRTS change of state
+						  * from active (LOW)
+						  * to inactive (HIGH)
+						  */
+/* LCR register bits */
+#define SC16IS7XX_LCR_LENGTH0_BIT	(1 << 0) /* Word length bit 0 */
+#define SC16IS7XX_LCR_LENGTH1_BIT	(1 << 1) /* Word length bit 1
+						  *
+						  * Word length bits table:
+						  * 00 -> 5 bit words
+						  * 01 -> 6 bit words
+						  * 10 -> 7 bit words
+						  * 11 -> 8 bit words
+						  */
+#define SC16IS7XX_LCR_STOPLEN_BIT	(1 << 2) /* STOP length bit
+						  *
+						  * STOP length bit table:
+						  * 0 -> 1 stop bit
+						  * 1 -> 1-1.5 stop bits if
+						  *      word length is 5,
+						  *      2 stop bits otherwise
+						  */
+#define SC16IS7XX_LCR_PARITY_BIT	(1 << 3) /* Parity bit enable */
+#define SC16IS7XX_LCR_EVENPARITY_BIT	(1 << 4) /* Even parity bit enable */
+#define SC16IS7XX_LCR_FORCEPARITY_BIT	(1 << 5) /* 9-bit multidrop parity */
+#define SC16IS7XX_LCR_TXBREAK_BIT	(1 << 6) /* TX break enable */
+#define SC16IS7XX_LCR_DLAB_BIT		(1 << 7) /* Divisor Latch enable */
+#define SC16IS7XX_LCR_WORD_LEN_5	(0x00)
+#define SC16IS7XX_LCR_WORD_LEN_6	(0x01)
+#define SC16IS7XX_LCR_WORD_LEN_7	(0x02)
+#define SC16IS7XX_LCR_WORD_LEN_8	(0x03)
+#define SC16IS7XX_LCR_CONF_MODE_A	SC16IS7XX_LCR_DLAB_BIT /* Special
+								* reg set */
+#define SC16IS7XX_LCR_CONF_MODE_B	0xBF                   /* Enhanced
+								* reg set */
+
+/* MCR register bits */
+#define SC16IS7XX_MCR_DTR_BIT		(1 << 0) /* DTR complement
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MCR_RTS_BIT		(1 << 1) /* RTS complement */
+#define SC16IS7XX_MCR_TCRTLR_BIT	(1 << 2) /* TCR/TLR register enable */
+#define SC16IS7XX_MCR_LOOP_BIT		(1 << 4) /* Enable loopback test mode */
+#define SC16IS7XX_MCR_XONANY_BIT	(1 << 5) /* Enable Xon Any
+						  * - write enabled
+						  * if (EFR[4] == 1)
+						  */
+#define SC16IS7XX_MCR_IRDA_BIT		(1 << 6) /* Enable IrDA mode
+						  * - write enabled
+						  * if (EFR[4] == 1)
+						  */
+#define SC16IS7XX_MCR_CLKSEL_BIT	(1 << 7) /* Divide clock by 4
+						  * - write enabled
+						  * if (EFR[4] == 1)
+						  */
+
+/* LSR register bits */
+#define SC16IS7XX_LSR_DR_BIT		(1 << 0) /* Receiver data ready */
+#define SC16IS7XX_LSR_OE_BIT		(1 << 1) /* Overrun Error */
+#define SC16IS7XX_LSR_PE_BIT		(1 << 2) /* Parity Error */
+#define SC16IS7XX_LSR_FE_BIT		(1 << 3) /* Frame Error */
+#define SC16IS7XX_LSR_BI_BIT		(1 << 4) /* Break Interrupt */
+#define SC16IS7XX_LSR_BRK_ERROR_MASK	0x1E     /* BI, FE, PE, OE bits */
+#define SC16IS7XX_LSR_THRE_BIT		(1 << 5) /* TX holding register empty */
+#define SC16IS7XX_LSR_TEMT_BIT		(1 << 6) /* Transmitter empty */
+#define SC16IS7XX_LSR_FIFOE_BIT		(1 << 7) /* Fifo Error */
+
+/* MSR register bits */
+#define SC16IS7XX_MSR_DCTS_BIT		(1 << 0) /* Delta CTS Clear To Send */
+#define SC16IS7XX_MSR_DDSR_BIT		(1 << 1) /* Delta DSR Data Set Ready
+						  * or (IO4)
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MSR_DRI_BIT		(1 << 2) /* Delta RI Ring Indicator
+						  * or (IO7)
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MSR_DCD_BIT		(1 << 3) /* Delta CD Carrier Detect
+						  * or (IO6)
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MSR_CTS_BIT		(1 << 0) /* CTS */
+#define SC16IS7XX_MSR_DSR_BIT		(1 << 1) /* DSR (IO4)
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MSR_RI_BIT		(1 << 2) /* RI (IO7)
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MSR_CD_BIT		(1 << 3) /* CD (IO6)
+						  * - only on 75x/76x
+						  */
+#define SC16IS7XX_MSR_DELTA_MASK	0x0F     /* Any of the delta bits! */
+
+/*
+ * TCR register bits
+ * TCR trigger levels are available from 0 to 60 characters with a granularity
+ * of four.
+ * The programmer must program the TCR such that TCR[3:0] > TCR[7:4]. There is
+ * no built-in hardware check to make sure this condition is met. Also, the TCR
+ * must be programmed with this condition before auto RTS or software flow
+ * control is enabled to avoid spurious operation of the device.
+ */
+#define SC16IS7XX_TCR_RX_HALT(words)	((((words) / 4) & 0x0f) << 0)
+#define SC16IS7XX_TCR_RX_RESUME(words)	((((words) / 4) & 0x0f) << 4)
+
+/*
+ * TLR register bits
+ * If TLR[3:0] or TLR[7:4] are logical 0, the selectable trigger levels via the
+ * FIFO Control Register (FCR) are used for the transmit and receive FIFO
+ * trigger levels. Trigger levels from 4 characters to 60 characters are
+ * available with a granularity of four.
+ *
+ * When the trigger level setting in TLR is zero, the SC16IS740/750/760 uses the
+ * trigger level setting defined in FCR. If TLR has non-zero trigger level value
+ * the trigger level defined in FCR is discarded. This applies to both transmit
+ * FIFO and receive FIFO trigger level setting.
+ *
+ * When TLR is used for RX trigger level control, FCR[7:6] should be left at the
+ * default state, that is, '00'.
+ */
+#define SC16IS7XX_TLR_TX_TRIGGER(words)	((((words) / 4) & 0x0f) << 0)
+#define SC16IS7XX_TLR_RX_TRIGGER(words)	((((words) / 4) & 0x0f) << 4)
+
+/* IOControl register bits (Only 750/760) */
+#define SC16IS7XX_IOCONTROL_LATCH_BIT	(1 << 0) /* Enable input latching */
+#define SC16IS7XX_IOCONTROL_GPIO_BIT	(1 << 1) /* Enable GPIO[7:4] */
+#define SC16IS7XX_IOCONTROL_SRESET_BIT	(1 << 3) /* Software Reset */
+
+/* EFCR register bits */
+#define SC16IS7XX_EFCR_9BIT_MODE_BIT	(1 << 0) /* Enable 9-bit or Multidrop
+						  * mode (RS485) */
+#define SC16IS7XX_EFCR_RXDISABLE_BIT	(1 << 1) /* Disable receiver */
+#define SC16IS7XX_EFCR_TXDISABLE_BIT	(1 << 2) /* Disable transmitter */
+#define SC16IS7XX_EFCR_AUTO_RS485_BIT	(1 << 4) /* Auto RS485 RTS direction */
+#define SC16IS7XX_EFCR_RTS_INVERT_BIT	(1 << 5) /* RTS output inversion */
+#define SC16IS7XX_EFCR_IRDA_MODE_BIT	(1 << 7) /* IrDA mode
+						  * 0 = rate upto 115.2 kbit/s
+						  *   - Only 750/760
+						  * 1 = rate upto 1.152 Mbit/s
+						  *   - Only 760
+						  */
+
+/* EFR register bits */
+#define SC16IS7XX_EFR_AUTORTS_BIT	(1 << 6) /* Auto RTS flow ctrl enable */
+#define SC16IS7XX_EFR_AUTOCTS_BIT	(1 << 7) /* Auto CTS flow ctrl enable */
+#define SC16IS7XX_EFR_XOFF2_DETECT_BIT	(1 << 5) /* Enable Xoff2 detection */
+#define SC16IS7XX_EFR_ENABLE_BIT	(1 << 4) /* Enable enhanced functions
+						  * and writing to IER[7:4],
+						  * FCR[5:4], MCR[7:5]
+						  */
+#define SC16IS7XX_EFR_SWFLOW3_BIT	(1 << 3) /* SWFLOW bit 3 */
+#define SC16IS7XX_EFR_SWFLOW2_BIT	(1 << 2) /* SWFLOW bit 2
+						  *
+						  * SWFLOW bits 3 & 2 table:
+						  * 00 -> no transmitter flow
+						  *       control
+						  * 01 -> transmitter generates
+						  *       XON2 and XOFF2
+						  * 10 -> transmitter generates
+						  *       XON1 and XOFF1
+						  * 11 -> transmitter generates
+						  *       XON1, XON2, XOFF1 and
+						  *       XOFF2
+						  */
+#define SC16IS7XX_EFR_SWFLOW1_BIT	(1 << 1) /* SWFLOW bit 2 */
+#define SC16IS7XX_EFR_SWFLOW0_BIT	(1 << 0) /* SWFLOW bit 3
+						  *
+						  * SWFLOW bits 3 & 2 table:
+						  * 00 -> no received flow
+						  *       control
+						  * 01 -> receiver compares
+						  *       XON2 and XOFF2
+						  * 10 -> receiver compares
+						  *       XON1 and XOFF1
+						  * 11 -> receiver compares
+						  *       XON1, XON2, XOFF1 and
+						  *       XOFF2
+						  */
+
+/* Misc definitions */
+#define SC16IS7XX_FIFO_SIZE		(64)
+#define SC16IS7XX_REG_SHIFT		2
+
+struct sc16is7xx_devtype {
+	char	name[10];
+	int	nr_gpio;
+	int	nr_uart;
+};
+
+struct sc16is7xx_one {
+	struct uart_port		port;
+	struct work_struct		tx_work;
+	struct work_struct		md_work;
+
+	struct serial_rs485		rs485;
+};
+
+struct sc16is7xx_port {
+	struct uart_driver		uart;
+	struct sc16is7xx_devtype	*devtype;
+	struct regmap			*regmap;
+	struct mutex			mutex;
+	struct clk			*clk;
+#ifdef CONFIG_GPIOLIB
+	struct gpio_chip		gpio;
+#endif
+	struct sc16is7xx_one		p[0];
+};
+
+#define to_sc16is7xx_one(p,e)	((container_of((p), struct sc16is7xx_one, e)))
+
+static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	unsigned int val = 0;
+
+	regmap_read(s->regmap,
+		    (reg << SC16IS7XX_REG_SHIFT) | port->line, &val);
+
+	return val;
+}
+
+static void sc16is7xx_port_write(struct uart_port *port, u8 reg, u8 val)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+
+	regmap_write(s->regmap,
+		     (reg << SC16IS7XX_REG_SHIFT) | port->line, val);
+}
+
+static void sc16is7xx_port_update(struct uart_port *port, u8 reg,
+				  u8 mask, u8 val)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+
+	regmap_update_bits(s->regmap,
+			   (reg << SC16IS7XX_REG_SHIFT) | port->line,
+			   mask, val);
+}
+
+
+static void sc16is7xx_power(struct uart_port *port, int on)
+{
+	sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
+			      SC16IS7XX_IER_SLEEP_BIT,
+			      on ? 0 : SC16IS7XX_IER_SLEEP_BIT);
+}
+
+static const struct sc16is7xx_devtype sc16is74x_devtype = {
+	.name		= "SC16IS74X",
+	.nr_gpio	= 0,
+	.nr_uart	= 1,
+};
+
+static const struct sc16is7xx_devtype sc16is750_devtype = {
+	.name		= "SC16IS750",
+	.nr_gpio	= 8,
+	.nr_uart	= 1,
+};
+
+static const struct sc16is7xx_devtype sc16is752_devtype = {
+	.name		= "SC16IS752",
+	.nr_gpio	= 8,
+	.nr_uart	= 2,
+};
+
+static const struct sc16is7xx_devtype sc16is760_devtype = {
+	.name		= "SC16IS760",
+	.nr_gpio	= 8,
+	.nr_uart	= 1,
+};
+
+static const struct sc16is7xx_devtype sc16is762_devtype = {
+	.name		= "SC16IS762",
+	.nr_gpio	= 8,
+	.nr_uart	= 2,
+};
+
+static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg >> SC16IS7XX_REG_SHIFT) {
+	case SC16IS7XX_RHR_REG:
+	case SC16IS7XX_IIR_REG:
+	case SC16IS7XX_LSR_REG:
+	case SC16IS7XX_MSR_REG:
+	case SC16IS7XX_TXLVL_REG:
+	case SC16IS7XX_RXLVL_REG:
+	case SC16IS7XX_IOSTATE_REG:
+		return true;
+	default:
+		break;
+	}
+
+	return false;
+}
+
+static bool sc16is7xx_regmap_precious(struct device *dev, unsigned int reg)
+{
+	switch (reg >> SC16IS7XX_REG_SHIFT) {
+	case SC16IS7XX_RHR_REG:
+		return true;
+	default:
+		break;
+	}
+
+	return false;
+}
+
+static int sc16is7xx_set_baud(struct uart_port *port, int baud)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	u8 lcr;
+	u8 prescaler = 0;
+	unsigned long clk = port->uartclk, div = clk / 16 / baud;
+
+	if (div > 0xffff) {
+		prescaler = SC16IS7XX_MCR_CLKSEL_BIT;
+		div /= 4;
+	}
+
+	lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG);
+
+	/* Open the LCR divisors for configuration */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
+			     SC16IS7XX_LCR_CONF_MODE_B);
+
+	/* Enable enhanced features */
+	regcache_cache_bypass(s->regmap, true);
+	sc16is7xx_port_write(port, SC16IS7XX_EFR_REG,
+			     SC16IS7XX_EFR_ENABLE_BIT);
+	regcache_cache_bypass(s->regmap, false);
+
+	/* Put LCR back to the normal mode */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
+
+	sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
+			      SC16IS7XX_MCR_CLKSEL_BIT,
+			      prescaler);
+
+	/* Open the LCR divisors for configuration */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
+			     SC16IS7XX_LCR_CONF_MODE_A);
+
+	/* Write the new divisor */
+	regcache_cache_bypass(s->regmap, true);
+	sc16is7xx_port_write(port, SC16IS7XX_DLH_REG, div / 256);
+	sc16is7xx_port_write(port, SC16IS7XX_DLL_REG, div % 256);
+	regcache_cache_bypass(s->regmap, false);
+
+	/* Put LCR back to the normal mode */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
+
+	return DIV_ROUND_CLOSEST(clk / 16, div);
+}
+
+static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen,
+				unsigned int iir)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	unsigned int lsr = 0, ch, flag, bytes_read, i;
+	u8 buf[port->fifosize];
+	bool read_lsr = (iir == SC16IS7XX_IIR_RLSE_SRC) ? true : false;
+
+	if (unlikely(rxlen >= port->fifosize)) {
+		dev_warn_ratelimited(port->dev,
+				     "Port %i: Possible RX FIFO overrun: %d\n",
+				     port->line, rxlen);
+		port->icount.buf_overrun++;
+		/* Ensure sanity of RX level */
+		rxlen = port->fifosize;
+	}
+
+	while (rxlen) {
+		/* Only read lsr if there are possible errors in FIFO */
+		if (read_lsr) {
+			lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
+			if (!(lsr & SC16IS7XX_LSR_FIFOE_BIT))
+				read_lsr = false; /* No errors left in FIFO */
+		} else
+			lsr = 0;
+
+		if (read_lsr) {
+			buf[0] = sc16is7xx_port_read(port, SC16IS7XX_RHR_REG);
+			bytes_read = 1;
+		} else {
+			regcache_cache_bypass(s->regmap, true);
+			regmap_raw_read(s->regmap, SC16IS7XX_RHR_REG,
+					buf, rxlen);
+			regcache_cache_bypass(s->regmap, false);
+			bytes_read = rxlen;
+		}
+
+		lsr &= SC16IS7XX_LSR_BRK_ERROR_MASK;
+
+		port->icount.rx++;
+		flag = TTY_NORMAL;
+
+		if (unlikely(lsr)) {
+			if (lsr & SC16IS7XX_LSR_BI_BIT) {
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					continue;
+			} else if (lsr & SC16IS7XX_LSR_PE_BIT)
+				port->icount.parity++;
+			else if (lsr & SC16IS7XX_LSR_FE_BIT)
+				port->icount.frame++;
+			else if (lsr & SC16IS7XX_LSR_OE_BIT)
+				port->icount.overrun++;
+
+			lsr &= port->read_status_mask;
+			if (lsr & SC16IS7XX_LSR_BI_BIT)
+				flag = TTY_BREAK;
+			else if (lsr & SC16IS7XX_LSR_PE_BIT)
+				flag = TTY_PARITY;
+			else if (lsr & SC16IS7XX_LSR_FE_BIT)
+				flag = TTY_FRAME;
+			else if (lsr & SC16IS7XX_LSR_OE_BIT)
+				flag = TTY_OVERRUN;
+		}
+
+		for (i = 0; i < bytes_read; ++i) {
+			ch = buf[i];
+			if (uart_handle_sysrq_char(port, ch))
+				continue;
+
+			if (lsr & port->ignore_status_mask)
+				continue;
+
+			uart_insert_char(port, lsr, SC16IS7XX_LSR_OE_BIT, ch,
+					 flag);
+		}
+		rxlen -= bytes_read;
+	}
+
+	tty_flip_buffer_push(&port->state->port);
+}
+
+static void sc16is7xx_handle_tx(struct uart_port *port)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	struct circ_buf *xmit = &port->state->xmit;
+	unsigned int txlen, to_send, i;
+	u8 buf[port->fifosize];
+
+	if (unlikely(port->x_char)) {
+		sc16is7xx_port_write(port, SC16IS7XX_THR_REG, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+		return;
+
+	/* Get length of data pending in circular buffer */
+	to_send = uart_circ_chars_pending(xmit);
+	if (likely(to_send)) {
+		/* Limit to size of TX FIFO */
+		txlen = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG);
+		to_send = (to_send > txlen) ? txlen : to_send;
+
+		/* Add data to send */
+		port->icount.tx += to_send;
+
+		/* Convert to linear buffer */
+		for (i = 0; i < to_send; ++i) {
+			buf[i] = xmit->buf[xmit->tail];
+			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		}
+		regcache_cache_bypass(s->regmap, true);
+		regmap_raw_write(s->regmap, SC16IS7XX_THR_REG, buf, to_send);
+		regcache_cache_bypass(s->regmap, false);
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+}
+
+static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
+{
+	struct uart_port *port = &s->p[portno].port;
+
+	do {
+		unsigned int iir, msr, rxlen;
+
+		iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG);
+		if (iir & SC16IS7XX_IIR_NO_INT_BIT)
+			break;
+
+		iir &= SC16IS7XX_IIR_ID_MASK;
+
+		switch (iir) {
+		case SC16IS7XX_IIR_RDI_SRC:
+		case SC16IS7XX_IIR_RLSE_SRC:
+		case SC16IS7XX_IIR_RTOI_SRC:
+		case SC16IS7XX_IIR_XOFFI_SRC:
+			rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG);
+			if (rxlen)
+				sc16is7xx_handle_rx(port, rxlen, iir);
+			break;
+
+		case SC16IS7XX_IIR_CTSRTS_SRC:
+			msr = sc16is7xx_port_read(port, SC16IS7XX_MSR_REG);
+			uart_handle_cts_change(port,
+					       !!(msr & SC16IS7XX_MSR_CTS_BIT));
+			break;
+		case SC16IS7XX_IIR_THRI_SRC:
+			mutex_lock(&s->mutex);
+			sc16is7xx_handle_tx(port);
+			mutex_unlock(&s->mutex);
+			break;
+		default:
+			dev_err_ratelimited(port->dev,
+					    "Port %i: Unexpected interrupt: %x",
+					    port->line, iir);
+			break;
+		}
+	} while (1);
+}
+
+static irqreturn_t sc16is7xx_ist(int irq, void *dev_id)
+{
+	struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id;
+	int i;
+
+	for (i = 0; i < s->uart.nr; ++i)
+		sc16is7xx_port_irq(s, i);
+
+	return IRQ_HANDLED;
+}
+
+static void sc16is7xx_wq_proc(struct work_struct *ws)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(ws, tx_work);
+	struct sc16is7xx_port *s = dev_get_drvdata(one->port.dev);
+
+	mutex_lock(&s->mutex);
+	sc16is7xx_handle_tx(&one->port);
+	mutex_unlock(&s->mutex);
+}
+
+static void sc16is7xx_stop_tx(struct uart_port* port)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+	struct circ_buf *xmit = &one->port.state->xmit;
+
+	/* handle rs485 */
+	if (one->rs485.flags & SER_RS485_ENABLED) {
+		/* do nothing if current tx not yet completed */
+		int lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
+		if (!(lsr & SC16IS7XX_LSR_TEMT_BIT))
+			return;
+
+		if (uart_circ_empty(xmit) &&
+		    (one->rs485.delay_rts_after_send > 0))
+			mdelay(one->rs485.delay_rts_after_send);
+	}
+
+	sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
+			      SC16IS7XX_IER_THRI_BIT,
+			      0);
+}
+
+static void sc16is7xx_stop_rx(struct uart_port* port)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+	one->port.read_status_mask &= ~SC16IS7XX_LSR_DR_BIT;
+	sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
+			      SC16IS7XX_LSR_DR_BIT,
+			      0);
+}
+
+static void sc16is7xx_start_tx(struct uart_port *port)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+	/* handle rs485 */
+	if ((one->rs485.flags & SER_RS485_ENABLED) &&
+	    (one->rs485.delay_rts_before_send > 0)) {
+		mdelay(one->rs485.delay_rts_before_send);
+	}
+
+	if (!work_pending(&one->tx_work))
+		schedule_work(&one->tx_work);
+}
+
+static unsigned int sc16is7xx_tx_empty(struct uart_port *port)
+{
+	unsigned int lvl, lsr;
+
+	lvl = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG);
+	lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
+
+	return ((lsr & SC16IS7XX_LSR_THRE_BIT) && !lvl) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int sc16is7xx_get_mctrl(struct uart_port *port)
+{
+	/* DCD and DSR are not wired and CTS/RTS is handled automatically
+	 * so just indicate DSR and CAR asserted
+	 */
+	return TIOCM_DSR | TIOCM_CAR;
+}
+
+static void sc16is7xx_md_proc(struct work_struct *ws)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(ws, md_work);
+
+	sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG,
+			      SC16IS7XX_MCR_LOOP_BIT,
+			      (one->port.mctrl & TIOCM_LOOP) ?
+				      SC16IS7XX_MCR_LOOP_BIT : 0);
+}
+
+static void sc16is7xx_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+	schedule_work(&one->md_work);
+}
+
+static void sc16is7xx_break_ctl(struct uart_port *port, int break_state)
+{
+	sc16is7xx_port_update(port, SC16IS7XX_LCR_REG,
+			      SC16IS7XX_LCR_TXBREAK_BIT,
+			      break_state ? SC16IS7XX_LCR_TXBREAK_BIT : 0);
+}
+
+static void sc16is7xx_set_termios(struct uart_port *port,
+				  struct ktermios *termios,
+				  struct ktermios *old)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	unsigned int lcr, flow = 0;
+	int baud;
+
+	/* Mask termios capabilities we don't support */
+	termios->c_cflag &= ~CMSPAR;
+
+	/* Word size */
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		lcr = SC16IS7XX_LCR_WORD_LEN_5;
+		break;
+	case CS6:
+		lcr = SC16IS7XX_LCR_WORD_LEN_6;
+		break;
+	case CS7:
+		lcr = SC16IS7XX_LCR_WORD_LEN_7;
+		break;
+	case CS8:
+		lcr = SC16IS7XX_LCR_WORD_LEN_8;
+		break;
+	default:
+		lcr = SC16IS7XX_LCR_WORD_LEN_8;
+		termios->c_cflag &= ~CSIZE;
+		termios->c_cflag |= CS8;
+		break;
+	}
+
+	/* Parity */
+	if (termios->c_cflag & PARENB) {
+		lcr |= SC16IS7XX_LCR_PARITY_BIT;
+		if (!(termios->c_cflag & PARODD))
+			lcr |= SC16IS7XX_LCR_EVENPARITY_BIT;
+	}
+
+	/* Stop bits */
+	if (termios->c_cflag & CSTOPB)
+		lcr |= SC16IS7XX_LCR_STOPLEN_BIT; /* 2 stops */
+
+	/* Set read status mask */
+	port->read_status_mask = SC16IS7XX_LSR_OE_BIT;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= SC16IS7XX_LSR_PE_BIT |
+					  SC16IS7XX_LSR_FE_BIT;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		port->read_status_mask |= SC16IS7XX_LSR_BI_BIT;
+
+	/* Set status ignore mask */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNBRK)
+		port->ignore_status_mask |= SC16IS7XX_LSR_BI_BIT;
+	if (!(termios->c_cflag & CREAD))
+		port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK;
+
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
+			     SC16IS7XX_LCR_CONF_MODE_B);
+
+	/* Configure flow control */
+	regcache_cache_bypass(s->regmap, true);
+	sc16is7xx_port_write(port, SC16IS7XX_XON1_REG, termios->c_cc[VSTART]);
+	sc16is7xx_port_write(port, SC16IS7XX_XOFF1_REG, termios->c_cc[VSTOP]);
+	if (termios->c_cflag & CRTSCTS)
+		flow |= SC16IS7XX_EFR_AUTOCTS_BIT |
+			SC16IS7XX_EFR_AUTORTS_BIT;
+	if (termios->c_iflag & IXON)
+		flow |= SC16IS7XX_EFR_SWFLOW3_BIT;
+	if (termios->c_iflag & IXOFF)
+		flow |= SC16IS7XX_EFR_SWFLOW1_BIT;
+
+	sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, flow);
+	regcache_cache_bypass(s->regmap, false);
+
+	/* Update LCR register */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
+
+	/* Get baud rate generator configuration */
+	baud = uart_get_baud_rate(port, termios, old,
+				  port->uartclk / 16 / 4 / 0xffff,
+				  port->uartclk / 16);
+
+	/* Setup baudrate generator */
+	baud = sc16is7xx_set_baud(port, baud);
+
+	/* Update timeout according to new baud rate */
+	uart_update_timeout(port, termios->c_cflag, baud);
+}
+
+#if defined(TIOCSRS485) && defined(TIOCGRS485)
+static void sc16is7xx_config_rs485(struct uart_port *port,
+				   struct serial_rs485 *rs485)
+{
+	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+	one->rs485 = *rs485;
+
+	if (one->rs485.flags & SER_RS485_ENABLED) {
+		sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
+				      SC16IS7XX_EFCR_AUTO_RS485_BIT,
+				      SC16IS7XX_EFCR_AUTO_RS485_BIT);
+	} else {
+		sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
+				      SC16IS7XX_EFCR_AUTO_RS485_BIT,
+				      0);
+	}
+}
+#endif
+
+static int sc16is7xx_ioctl(struct uart_port *port, unsigned int cmd,
+			   unsigned long arg)
+{
+#if defined(TIOCSRS485) && defined(TIOCGRS485)
+	struct serial_rs485 rs485;
+
+	switch (cmd) {
+	case TIOCSRS485:
+		if (copy_from_user(&rs485, (void __user *)arg, sizeof(rs485)))
+			return -EFAULT;
+
+		sc16is7xx_config_rs485(port, &rs485);
+		return 0;
+	case TIOCGRS485:
+		if (copy_to_user((void __user *)arg,
+				 &(to_sc16is7xx_one(port, port)->rs485),
+				 sizeof(rs485)))
+			return -EFAULT;
+		return 0;
+	default:
+		break;
+	}
+#endif
+
+	return -ENOIOCTLCMD;
+}
+
+static int sc16is7xx_startup(struct uart_port *port)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	unsigned int val;
+
+	sc16is7xx_power(port, 1);
+
+	/* Reset FIFOs*/
+	val = SC16IS7XX_FCR_RXRESET_BIT | SC16IS7XX_FCR_TXRESET_BIT;
+	sc16is7xx_port_write(port, SC16IS7XX_FCR_REG, val);
+	udelay(5);
+	sc16is7xx_port_write(port, SC16IS7XX_FCR_REG,
+			     SC16IS7XX_FCR_FIFO_BIT);
+
+	/* Enable EFR */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
+			     SC16IS7XX_LCR_CONF_MODE_B);
+
+	regcache_cache_bypass(s->regmap, true);
+
+	/* Enable write access to enhanced features and internal clock div */
+	sc16is7xx_port_write(port, SC16IS7XX_EFR_REG,
+			     SC16IS7XX_EFR_ENABLE_BIT);
+
+	/* Enable TCR/TLR */
+	sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
+			      SC16IS7XX_MCR_TCRTLR_BIT,
+			      SC16IS7XX_MCR_TCRTLR_BIT);
+
+	/* Configure flow control levels */
+	/* Flow control halt level 48, resume level 24 */
+	sc16is7xx_port_write(port, SC16IS7XX_TCR_REG,
+			     SC16IS7XX_TCR_RX_RESUME(24) |
+			     SC16IS7XX_TCR_RX_HALT(48));
+
+	regcache_cache_bypass(s->regmap, false);
+
+	/* Now, initialize the UART */
+	sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_WORD_LEN_8);
+
+	/* Enable the Rx and Tx FIFO */
+	sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
+			      SC16IS7XX_EFCR_RXDISABLE_BIT |
+			      SC16IS7XX_EFCR_TXDISABLE_BIT,
+			      0);
+
+	/* Enable RX, TX, CTS change interrupts */
+	val = SC16IS7XX_IER_RDI_BIT | SC16IS7XX_IER_THRI_BIT |
+	      SC16IS7XX_IER_CTSI_BIT;
+	sc16is7xx_port_write(port, SC16IS7XX_IER_REG, val);
+
+	return 0;
+}
+
+static void sc16is7xx_shutdown(struct uart_port *port)
+{
+	/* Disable all interrupts */
+	sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0);
+	/* Disable TX/RX */
+	sc16is7xx_port_write(port, SC16IS7XX_EFCR_REG,
+			     SC16IS7XX_EFCR_RXDISABLE_BIT |
+			     SC16IS7XX_EFCR_TXDISABLE_BIT);
+
+	sc16is7xx_power(port, 0);
+}
+
+static const char *sc16is7xx_type(struct uart_port *port)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+
+	return (port->type == PORT_SC16IS7XX) ? s->devtype->name : NULL;
+}
+
+static int sc16is7xx_request_port(struct uart_port *port)
+{
+	/* Do nothing */
+	return 0;
+}
+
+static void sc16is7xx_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE)
+		port->type = PORT_SC16IS7XX;
+}
+
+static int sc16is7xx_verify_port(struct uart_port *port,
+				 struct serial_struct *s)
+{
+	if ((s->type != PORT_UNKNOWN) && (s->type != PORT_SC16IS7XX))
+		return -EINVAL;
+	if (s->irq != port->irq)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void sc16is7xx_pm(struct uart_port *port, unsigned int state,
+			 unsigned int oldstate)
+{
+	sc16is7xx_power(port, (state == UART_PM_STATE_ON) ? 1 : 0);
+}
+
+static void sc16is7xx_null_void(struct uart_port *port)
+{
+	/* Do nothing */
+}
+
+static const struct uart_ops sc16is7xx_ops = {
+	.tx_empty	= sc16is7xx_tx_empty,
+	.set_mctrl	= sc16is7xx_set_mctrl,
+	.get_mctrl	= sc16is7xx_get_mctrl,
+	.stop_tx	= sc16is7xx_stop_tx,
+	.start_tx	= sc16is7xx_start_tx,
+	.stop_rx	= sc16is7xx_stop_rx,
+	.enable_ms	= sc16is7xx_null_void,
+	.break_ctl	= sc16is7xx_break_ctl,
+	.startup	= sc16is7xx_startup,
+	.shutdown	= sc16is7xx_shutdown,
+	.set_termios	= sc16is7xx_set_termios,
+	.type		= sc16is7xx_type,
+	.request_port	= sc16is7xx_request_port,
+	.release_port	= sc16is7xx_null_void,
+	.config_port	= sc16is7xx_config_port,
+	.verify_port	= sc16is7xx_verify_port,
+	.ioctl		= sc16is7xx_ioctl,
+	.pm		= sc16is7xx_pm,
+};
+
+#ifdef CONFIG_GPIOLIB
+static int sc16is7xx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned int val;
+	struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
+						gpio);
+	struct uart_port *port = &s->p[0].port;
+
+	val = sc16is7xx_port_read(port, SC16IS7XX_IOSTATE_REG);
+
+	return !!(val & BIT(offset));
+}
+
+static void sc16is7xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
+						gpio);
+	struct uart_port *port = &s->p[0].port;
+
+	sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset),
+			      val ? BIT(offset) : 0);
+}
+
+static int sc16is7xx_gpio_direction_input(struct gpio_chip *chip,
+					  unsigned offset)
+{
+	struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
+						gpio);
+	struct uart_port *port = &s->p[0].port;
+
+	sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), 0);
+
+	return 0;
+}
+
+static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
+					   unsigned offset, int val)
+{
+	struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
+						gpio);
+	struct uart_port *port = &s->p[0].port;
+
+	sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset),
+			      val ? BIT(offset) : 0);
+	sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset),
+			      BIT(offset));
+
+	return 0;
+}
+#endif
+
+static int sc16is7xx_probe(struct device *dev,
+			   struct sc16is7xx_devtype *devtype,
+			   struct regmap *regmap, int irq, unsigned long flags)
+{
+	unsigned long freq, *pfreq = dev_get_platdata(dev);
+	struct clk *clk;
+	int i, ret;
+	struct sc16is7xx_port *s;
+
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	/* Alloc port structure */
+	s = devm_kzalloc(dev, sizeof(*s) +
+			 sizeof(struct sc16is7xx_one) * devtype->nr_uart,
+			 GFP_KERNEL);
+	if (!s) {
+		dev_err(dev, "Error allocating port structure\n");
+		return -ENOMEM;
+	}
+
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk)) {
+		if (pfreq)
+			freq = *pfreq;
+		else
+			return PTR_ERR(clk);
+	} else {
+		freq = clk_get_rate(clk);
+	}
+
+	s->regmap = regmap;
+	s->devtype = devtype;
+	dev_set_drvdata(dev, s);
+
+	/* Register UART driver */
+	s->uart.owner		= THIS_MODULE;
+	s->uart.dev_name	= "ttySC";
+	s->uart.nr		= devtype->nr_uart;
+	ret = uart_register_driver(&s->uart);
+	if (ret) {
+		dev_err(dev, "Registering UART driver failed\n");
+		goto out_clk;
+	}
+
+#ifdef CONFIG_GPIOLIB
+	if (devtype->nr_gpio) {
+		/* Setup GPIO cotroller */
+		s->gpio.owner		 = THIS_MODULE;
+		s->gpio.dev		 = dev;
+		s->gpio.label		 = dev_name(dev);
+		s->gpio.direction_input	 = sc16is7xx_gpio_direction_input;
+		s->gpio.get		 = sc16is7xx_gpio_get;
+		s->gpio.direction_output = sc16is7xx_gpio_direction_output;
+		s->gpio.set		 = sc16is7xx_gpio_set;
+		s->gpio.base		 = -1;
+		s->gpio.ngpio		 = devtype->nr_gpio;
+		s->gpio.can_sleep	 = 1;
+		ret = gpiochip_add(&s->gpio);
+		if (ret)
+			goto out_uart;
+	}
+#endif
+
+	mutex_init(&s->mutex);
+
+	for (i = 0; i < devtype->nr_uart; ++i) {
+		/* Initialize port data */
+		s->p[i].port.line	= i;
+		s->p[i].port.dev	= dev;
+		s->p[i].port.irq	= irq;
+		s->p[i].port.type	= PORT_SC16IS7XX;
+		s->p[i].port.fifosize	= SC16IS7XX_FIFO_SIZE;
+		s->p[i].port.flags	= UPF_FIXED_TYPE | UPF_LOW_LATENCY;
+		s->p[i].port.iotype	= UPIO_PORT;
+		s->p[i].port.uartclk	= freq;
+		s->p[i].port.ops	= &sc16is7xx_ops;
+		/* Disable all interrupts */
+		sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0);
+		/* Disable TX/RX */
+		sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_EFCR_REG,
+				     SC16IS7XX_EFCR_RXDISABLE_BIT |
+				     SC16IS7XX_EFCR_TXDISABLE_BIT);
+		/* Initialize queue for start TX */
+		INIT_WORK(&s->p[i].tx_work, sc16is7xx_wq_proc);
+		/* Initialize queue for changing mode */
+		INIT_WORK(&s->p[i].md_work, sc16is7xx_md_proc);
+		/* Register port */
+		uart_add_one_port(&s->uart, &s->p[i].port);
+		/* Go to suspend mode */
+		sc16is7xx_power(&s->p[i].port, 0);
+	}
+
+	/* Setup interrupt */
+	ret = devm_request_threaded_irq(dev, irq, NULL, sc16is7xx_ist,
+					IRQF_ONESHOT | flags, dev_name(dev), s);
+	if (!ret)
+		return 0;
+
+	mutex_destroy(&s->mutex);
+
+#ifdef CONFIG_GPIOLIB
+	if (devtype->nr_gpio)
+		WARN_ON(gpiochip_remove(&s->gpio));
+
+out_uart:
+#endif
+	uart_unregister_driver(&s->uart);
+
+out_clk:
+	if (!IS_ERR(s->clk))
+		clk_disable_unprepare(s->clk);
+
+	return ret;
+}
+
+static int sc16is7xx_remove(struct device *dev)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(dev);
+	int i, ret = 0;
+
+#ifdef CONFIG_GPIOLIB
+	if (s->devtype->nr_gpio) {
+		ret = gpiochip_remove(&s->gpio);
+		if (ret)
+			return ret;
+	}
+#endif
+
+	for (i = 0; i < s->uart.nr; i++) {
+		cancel_work_sync(&s->p[i].tx_work);
+		cancel_work_sync(&s->p[i].md_work);
+		uart_remove_one_port(&s->uart, &s->p[i].port);
+		sc16is7xx_power(&s->p[i].port, 0);
+	}
+
+	mutex_destroy(&s->mutex);
+	uart_unregister_driver(&s->uart);
+	if (!IS_ERR(s->clk))
+		clk_disable_unprepare(s->clk);
+
+	return ret;
+}
+
+static const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = {
+	{ .compatible = "nxp,sc16is740",	.data = &sc16is74x_devtype, },
+	{ .compatible = "nxp,sc16is741",	.data = &sc16is74x_devtype, },
+	{ .compatible = "nxp,sc16is750",	.data = &sc16is750_devtype, },
+	{ .compatible = "nxp,sc16is752",	.data = &sc16is752_devtype, },
+	{ .compatible = "nxp,sc16is760",	.data = &sc16is760_devtype, },
+	{ .compatible = "nxp,sc16is762",	.data = &sc16is762_devtype, },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sc16is7xx_dt_ids);
+
+static struct regmap_config regcfg = {
+	.reg_bits = 7,
+	.pad_bits = 1,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = sc16is7xx_regmap_volatile,
+	.precious_reg = sc16is7xx_regmap_precious,
+};
+
+#ifdef CONFIG_REGMAP_I2C
+static int sc16is7xx_i2c_probe(struct i2c_client *i2c,
+			       const struct i2c_device_id *id)
+{
+	struct sc16is7xx_devtype *devtype;
+	unsigned long flags = 0;
+	struct regmap *regmap;
+
+	if (i2c->dev.of_node) {
+		const struct of_device_id *of_id =
+				of_match_device(sc16is7xx_dt_ids, &i2c->dev);
+
+		devtype = (struct sc16is7xx_devtype *)of_id->data;
+	} else {
+		devtype = (struct sc16is7xx_devtype *)id->driver_data;
+		flags = IRQF_TRIGGER_FALLING;
+	}
+
+	regcfg.max_register = (0xf << SC16IS7XX_REG_SHIFT) |
+			      (devtype->nr_uart - 1);
+	regmap = devm_regmap_init_i2c(i2c, &regcfg);
+
+	return sc16is7xx_probe(&i2c->dev, devtype, regmap, i2c->irq, flags);
+}
+
+static int sc16is7xx_i2c_remove(struct i2c_client *client)
+{
+	return sc16is7xx_remove(&client->dev);
+}
+
+static const struct i2c_device_id sc16is7xx_i2c_id_table[] = {
+	{ "sc16is74x",	(kernel_ulong_t)&sc16is74x_devtype, },
+	{ "sc16is750",	(kernel_ulong_t)&sc16is750_devtype, },
+	{ "sc16is752",	(kernel_ulong_t)&sc16is752_devtype, },
+	{ "sc16is760",	(kernel_ulong_t)&sc16is760_devtype, },
+	{ "sc16is762",	(kernel_ulong_t)&sc16is762_devtype, },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table);
+
+static struct i2c_driver sc16is7xx_i2c_uart_driver = {
+	.driver = {
+		.name		= SC16IS7XX_NAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= of_match_ptr(sc16is7xx_dt_ids),
+	},
+	.probe		= sc16is7xx_i2c_probe,
+	.remove		= sc16is7xx_i2c_remove,
+	.id_table	= sc16is7xx_i2c_id_table,
+};
+module_i2c_driver(sc16is7xx_i2c_uart_driver);
+MODULE_ALIAS("i2c:sc16is7xx");
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jon Ringle <jringle@gridpoint.com>");
+MODULE_DESCRIPTION("SC16IS7XX serial driver");
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index b68550d95a40..9a01ee4dda6d 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2239,6 +2239,9 @@ static void uart_poll_put_char(struct tty_driver *driver, int line, char ch)
 		return;
 
 	port = state->uart_port;
+
+	if (ch == '\n')
+		port->ops->poll_put_char(port, '\r');
 	port->ops->poll_put_char(port, ch);
 }
 #endif
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 90a080b1f9ee..60f49b9d7e39 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -535,13 +535,8 @@ static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
 	wait_for_xmitr(up);
 	/*
 	 *	Send the character out.
-	 *	If a LF, also do CR...
 	 */
 	sio_out(up, TXX9_SITFIFO, c);
-	if (c == 10) {
-		wait_for_xmitr(up);
-		sio_out(up, TXX9_SITFIFO, 13);
-	}
 
 	/*
 	 *	Finally, wait for transmitter to become empty
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index f619ad5b5eae..8809775e2ba3 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1,7 +1,7 @@
 /*
- * Xilinx PS UART driver
+ * Cadence UART driver (found in Xilinx Zynq)
  *
- * 2011 - 2013 (C) Xilinx Inc.
+ * 2011 - 2014 (C) Xilinx Inc.
  *
  * This program is free software; you can redistribute it
  * and/or modify it under the terms of the GNU General Public
@@ -9,6 +9,9 @@
  * either version 2 of the License, or (at your option) any
  * later version.
  *
+ * This driver has originally been pushed by Xilinx using a Zynq-branding. This
+ * still shows in the naming of this file, the kconfig symbols and some symbols
+ * in the code.
  */
 
 #if defined(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -28,16 +31,16 @@
 #include <linux/of.h>
 #include <linux/module.h>
 
-#define XUARTPS_TTY_NAME	"ttyPS"
-#define XUARTPS_NAME		"xuartps"
-#define XUARTPS_MAJOR		0	/* use dynamic node allocation */
-#define XUARTPS_MINOR		0	/* works best with devtmpfs */
-#define XUARTPS_NR_PORTS	2
-#define XUARTPS_FIFO_SIZE	64	/* FIFO size */
-#define XUARTPS_REGISTER_SPACE	0xFFF
+#define CDNS_UART_TTY_NAME	"ttyPS"
+#define CDNS_UART_NAME		"xuartps"
+#define CDNS_UART_MAJOR		0	/* use dynamic node allocation */
+#define CDNS_UART_MINOR		0	/* works best with devtmpfs */
+#define CDNS_UART_NR_PORTS	2
+#define CDNS_UART_FIFO_SIZE	64	/* FIFO size */
+#define CDNS_UART_REGISTER_SPACE	0xFFF
 
-#define xuartps_readl(offset)		ioread32(port->membase + offset)
-#define xuartps_writel(val, offset)	iowrite32(val, port->membase + offset)
+#define cdns_uart_readl(offset)		ioread32(port->membase + offset)
+#define cdns_uart_writel(val, offset)	iowrite32(val, port->membase + offset)
 
 /* Rx Trigger level */
 static int rx_trigger_level = 56;
@@ -49,77 +52,62 @@ static int rx_timeout = 10;
 module_param(rx_timeout, uint, S_IRUGO);
 MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
 
-/********************************Register Map********************************/
-/** UART
- *
- * Register offsets for the UART.
- *
- */
-#define XUARTPS_CR_OFFSET	0x00  /* Control Register [8:0] */
-#define XUARTPS_MR_OFFSET	0x04  /* Mode Register [10:0] */
-#define XUARTPS_IER_OFFSET	0x08  /* Interrupt Enable [10:0] */
-#define XUARTPS_IDR_OFFSET	0x0C  /* Interrupt Disable [10:0] */
-#define XUARTPS_IMR_OFFSET	0x10  /* Interrupt Mask [10:0] */
-#define XUARTPS_ISR_OFFSET	0x14  /* Interrupt Status [10:0]*/
-#define XUARTPS_BAUDGEN_OFFSET	0x18  /* Baud Rate Generator [15:0] */
-#define XUARTPS_RXTOUT_OFFSET	0x1C  /* RX Timeout [7:0] */
-#define XUARTPS_RXWM_OFFSET	0x20  /* RX FIFO Trigger Level [5:0] */
-#define XUARTPS_MODEMCR_OFFSET	0x24  /* Modem Control [5:0] */
-#define XUARTPS_MODEMSR_OFFSET	0x28  /* Modem Status [8:0] */
-#define XUARTPS_SR_OFFSET	0x2C  /* Channel Status [11:0] */
-#define XUARTPS_FIFO_OFFSET	0x30  /* FIFO [15:0] or [7:0] */
-#define XUARTPS_BAUDDIV_OFFSET	0x34  /* Baud Rate Divider [7:0] */
-#define XUARTPS_FLOWDEL_OFFSET	0x38  /* Flow Delay [15:0] */
-#define XUARTPS_IRRX_PWIDTH_OFFSET 0x3C /* IR Minimum Received Pulse
-						Width [15:0] */
-#define XUARTPS_IRTX_PWIDTH_OFFSET 0x40 /* IR Transmitted pulse
-						Width [7:0] */
-#define XUARTPS_TXWM_OFFSET	0x44  /* TX FIFO Trigger Level [5:0] */
-
-/** Control Register
- *
- * The Control register (CR) controls the major functions of the device.
- *
- * Control Register Bit Definitions
- */
-#define XUARTPS_CR_STOPBRK	0x00000100  /* Stop TX break */
-#define XUARTPS_CR_STARTBRK	0x00000080  /* Set TX break */
-#define XUARTPS_CR_TX_DIS	0x00000020  /* TX disabled. */
-#define XUARTPS_CR_TX_EN	0x00000010  /* TX enabled */
-#define XUARTPS_CR_RX_DIS	0x00000008  /* RX disabled. */
-#define XUARTPS_CR_RX_EN	0x00000004  /* RX enabled */
-#define XUARTPS_CR_TXRST	0x00000002  /* TX logic reset */
-#define XUARTPS_CR_RXRST	0x00000001  /* RX logic reset */
-#define XUARTPS_CR_RST_TO	0x00000040  /* Restart Timeout Counter */
-
-/** Mode Register
- *
+/* Register offsets for the UART. */
+#define CDNS_UART_CR_OFFSET		0x00  /* Control Register */
+#define CDNS_UART_MR_OFFSET		0x04  /* Mode Register */
+#define CDNS_UART_IER_OFFSET		0x08  /* Interrupt Enable */
+#define CDNS_UART_IDR_OFFSET		0x0C  /* Interrupt Disable */
+#define CDNS_UART_IMR_OFFSET		0x10  /* Interrupt Mask */
+#define CDNS_UART_ISR_OFFSET		0x14  /* Interrupt Status */
+#define CDNS_UART_BAUDGEN_OFFSET	0x18  /* Baud Rate Generator */
+#define CDNS_UART_RXTOUT_OFFSET		0x1C  /* RX Timeout */
+#define CDNS_UART_RXWM_OFFSET		0x20  /* RX FIFO Trigger Level */
+#define CDNS_UART_MODEMCR_OFFSET	0x24  /* Modem Control */
+#define CDNS_UART_MODEMSR_OFFSET	0x28  /* Modem Status */
+#define CDNS_UART_SR_OFFSET		0x2C  /* Channel Status */
+#define CDNS_UART_FIFO_OFFSET		0x30  /* FIFO */
+#define CDNS_UART_BAUDDIV_OFFSET	0x34  /* Baud Rate Divider */
+#define CDNS_UART_FLOWDEL_OFFSET	0x38  /* Flow Delay */
+#define CDNS_UART_IRRX_PWIDTH_OFFSET	0x3C  /* IR Min Received Pulse Width */
+#define CDNS_UART_IRTX_PWIDTH_OFFSET	0x40  /* IR Transmitted pulse Width */
+#define CDNS_UART_TXWM_OFFSET		0x44  /* TX FIFO Trigger Level */
+
+/* Control Register Bit Definitions */
+#define CDNS_UART_CR_STOPBRK	0x00000100  /* Stop TX break */
+#define CDNS_UART_CR_STARTBRK	0x00000080  /* Set TX break */
+#define CDNS_UART_CR_TX_DIS	0x00000020  /* TX disabled. */
+#define CDNS_UART_CR_TX_EN	0x00000010  /* TX enabled */
+#define CDNS_UART_CR_RX_DIS	0x00000008  /* RX disabled. */
+#define CDNS_UART_CR_RX_EN	0x00000004  /* RX enabled */
+#define CDNS_UART_CR_TXRST	0x00000002  /* TX logic reset */
+#define CDNS_UART_CR_RXRST	0x00000001  /* RX logic reset */
+#define CDNS_UART_CR_RST_TO	0x00000040  /* Restart Timeout Counter */
+
+/*
+ * Mode Register:
  * The mode register (MR) defines the mode of transfer as well as the data
  * format. If this register is modified during transmission or reception,
  * data validity cannot be guaranteed.
- *
- * Mode Register Bit Definitions
- *
  */
-#define XUARTPS_MR_CLKSEL		0x00000001  /* Pre-scalar selection */
-#define XUARTPS_MR_CHMODE_L_LOOP	0x00000200  /* Local loop back mode */
-#define XUARTPS_MR_CHMODE_NORM		0x00000000  /* Normal mode */
+#define CDNS_UART_MR_CLKSEL		0x00000001  /* Pre-scalar selection */
+#define CDNS_UART_MR_CHMODE_L_LOOP	0x00000200  /* Local loop back mode */
+#define CDNS_UART_MR_CHMODE_NORM	0x00000000  /* Normal mode */
 
-#define XUARTPS_MR_STOPMODE_2_BIT	0x00000080  /* 2 stop bits */
-#define XUARTPS_MR_STOPMODE_1_BIT	0x00000000  /* 1 stop bit */
+#define CDNS_UART_MR_STOPMODE_2_BIT	0x00000080  /* 2 stop bits */
+#define CDNS_UART_MR_STOPMODE_1_BIT	0x00000000  /* 1 stop bit */
 
-#define XUARTPS_MR_PARITY_NONE		0x00000020  /* No parity mode */
-#define XUARTPS_MR_PARITY_MARK		0x00000018  /* Mark parity mode */
-#define XUARTPS_MR_PARITY_SPACE		0x00000010  /* Space parity mode */
-#define XUARTPS_MR_PARITY_ODD		0x00000008  /* Odd parity mode */
-#define XUARTPS_MR_PARITY_EVEN		0x00000000  /* Even parity mode */
+#define CDNS_UART_MR_PARITY_NONE	0x00000020  /* No parity mode */
+#define CDNS_UART_MR_PARITY_MARK	0x00000018  /* Mark parity mode */
+#define CDNS_UART_MR_PARITY_SPACE	0x00000010  /* Space parity mode */
+#define CDNS_UART_MR_PARITY_ODD		0x00000008  /* Odd parity mode */
+#define CDNS_UART_MR_PARITY_EVEN	0x00000000  /* Even parity mode */
 
-#define XUARTPS_MR_CHARLEN_6_BIT	0x00000006  /* 6 bits data */
-#define XUARTPS_MR_CHARLEN_7_BIT	0x00000004  /* 7 bits data */
-#define XUARTPS_MR_CHARLEN_8_BIT	0x00000000  /* 8 bits data */
+#define CDNS_UART_MR_CHARLEN_6_BIT	0x00000006  /* 6 bits data */
+#define CDNS_UART_MR_CHARLEN_7_BIT	0x00000004  /* 7 bits data */
+#define CDNS_UART_MR_CHARLEN_8_BIT	0x00000000  /* 8 bits data */
 
-/** Interrupt Registers
- *
+/*
+ * Interrupt Registers:
  * Interrupt control logic uses the interrupt enable register (IER) and the
  * interrupt disable register (IDR) to set the value of the bits in the
  * interrupt mask register (IMR). The IMR determines whether to pass an
@@ -127,65 +115,65 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
  * Writing a 1 to IER Enables an interrupt, writing a 1 to IDR disables an
  * interrupt. IMR and ISR are read only, and IER and IDR are write only.
  * Reading either IER or IDR returns 0x00.
- *
  * All four registers have the same bit definitions.
  */
-#define XUARTPS_IXR_TOUT	0x00000100 /* RX Timeout error interrupt */
-#define XUARTPS_IXR_PARITY	0x00000080 /* Parity error interrupt */
-#define XUARTPS_IXR_FRAMING	0x00000040 /* Framing error interrupt */
-#define XUARTPS_IXR_OVERRUN	0x00000020 /* Overrun error interrupt */
-#define XUARTPS_IXR_TXFULL	0x00000010 /* TX FIFO Full interrupt */
-#define XUARTPS_IXR_TXEMPTY	0x00000008 /* TX FIFO empty interrupt */
-#define XUARTPS_ISR_RXEMPTY	0x00000002 /* RX FIFO empty interrupt */
-#define XUARTPS_IXR_RXTRIG	0x00000001 /* RX FIFO trigger interrupt */
-#define XUARTPS_IXR_RXFULL	0x00000004 /* RX FIFO full interrupt. */
-#define XUARTPS_IXR_RXEMPTY	0x00000002 /* RX FIFO empty interrupt. */
-#define XUARTPS_IXR_MASK	0x00001FFF /* Valid bit mask */
+#define CDNS_UART_IXR_TOUT	0x00000100 /* RX Timeout error interrupt */
+#define CDNS_UART_IXR_PARITY	0x00000080 /* Parity error interrupt */
+#define CDNS_UART_IXR_FRAMING	0x00000040 /* Framing error interrupt */
+#define CDNS_UART_IXR_OVERRUN	0x00000020 /* Overrun error interrupt */
+#define CDNS_UART_IXR_TXFULL	0x00000010 /* TX FIFO Full interrupt */
+#define CDNS_UART_IXR_TXEMPTY	0x00000008 /* TX FIFO empty interrupt */
+#define CDNS_UART_ISR_RXEMPTY	0x00000002 /* RX FIFO empty interrupt */
+#define CDNS_UART_IXR_RXTRIG	0x00000001 /* RX FIFO trigger interrupt */
+#define CDNS_UART_IXR_RXFULL	0x00000004 /* RX FIFO full interrupt. */
+#define CDNS_UART_IXR_RXEMPTY	0x00000002 /* RX FIFO empty interrupt. */
+#define CDNS_UART_IXR_MASK	0x00001FFF /* Valid bit mask */
 
 /* Goes in read_status_mask for break detection as the HW doesn't do it*/
-#define XUARTPS_IXR_BRK		0x80000000
+#define CDNS_UART_IXR_BRK	0x80000000
 
-/** Channel Status Register
- *
+/*
+ * Channel Status Register:
  * The channel status register (CSR) is provided to enable the control logic
  * to monitor the status of bits in the channel interrupt status register,
  * even if these are masked out by the interrupt mask register.
  */
-#define XUARTPS_SR_RXEMPTY	0x00000002 /* RX FIFO empty */
-#define XUARTPS_SR_TXEMPTY	0x00000008 /* TX FIFO empty */
-#define XUARTPS_SR_TXFULL	0x00000010 /* TX FIFO full */
-#define XUARTPS_SR_RXTRIG	0x00000001 /* Rx Trigger */
+#define CDNS_UART_SR_RXEMPTY	0x00000002 /* RX FIFO empty */
+#define CDNS_UART_SR_TXEMPTY	0x00000008 /* TX FIFO empty */
+#define CDNS_UART_SR_TXFULL	0x00000010 /* TX FIFO full */
+#define CDNS_UART_SR_RXTRIG	0x00000001 /* Rx Trigger */
 
 /* baud dividers min/max values */
-#define XUARTPS_BDIV_MIN	4
-#define XUARTPS_BDIV_MAX	255
-#define XUARTPS_CD_MAX		65535
+#define CDNS_UART_BDIV_MIN	4
+#define CDNS_UART_BDIV_MAX	255
+#define CDNS_UART_CD_MAX	65535
 
 /**
- * struct xuartps - device data
- * @port		Pointer to the UART port
- * @refclk		Reference clock
- * @aperclk		APB clock
- * @baud		Current baud rate
- * @clk_rate_change_nb	Notifier block for clock changes
+ * struct cdns_uart - device data
+ * @port:		Pointer to the UART port
+ * @uartclk:		Reference clock
+ * @pclk:		APB clock
+ * @baud:		Current baud rate
+ * @clk_rate_change_nb:	Notifier block for clock changes
  */
-struct xuartps {
+struct cdns_uart {
 	struct uart_port	*port;
-	struct clk		*refclk;
-	struct clk		*aperclk;
+	struct clk		*uartclk;
+	struct clk		*pclk;
 	unsigned int		baud;
 	struct notifier_block	clk_rate_change_nb;
 };
-#define to_xuartps(_nb) container_of(_nb, struct xuartps, clk_rate_change_nb);
+#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \
+		clk_rate_change_nb);
 
 /**
- * xuartps_isr - Interrupt handler
+ * cdns_uart_isr - Interrupt handler
  * @irq: Irq number
  * @dev_id: Id of the port
  *
- * Returns IRQHANDLED
- **/
-static irqreturn_t xuartps_isr(int irq, void *dev_id)
+ * Return: IRQHANDLED
+ */
+static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
 {
 	struct uart_port *port = (struct uart_port *)dev_id;
 	unsigned long flags;
@@ -198,43 +186,42 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 	/* Read the interrupt status register to determine which
 	 * interrupt(s) is/are active.
 	 */
-	isrstatus = xuartps_readl(XUARTPS_ISR_OFFSET);
+	isrstatus = cdns_uart_readl(CDNS_UART_ISR_OFFSET);
 
 	/*
 	 * There is no hardware break detection, so we interpret framing
 	 * error with all-zeros data as a break sequence. Most of the time,
 	 * there's another non-zero byte at the end of the sequence.
 	 */
-
-	if (isrstatus & XUARTPS_IXR_FRAMING) {
-		while (!(xuartps_readl(XUARTPS_SR_OFFSET) &
-					XUARTPS_SR_RXEMPTY)) {
-			if (!xuartps_readl(XUARTPS_FIFO_OFFSET)) {
-				port->read_status_mask |= XUARTPS_IXR_BRK;
-				isrstatus &= ~XUARTPS_IXR_FRAMING;
+	if (isrstatus & CDNS_UART_IXR_FRAMING) {
+		while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+					CDNS_UART_SR_RXEMPTY)) {
+			if (!cdns_uart_readl(CDNS_UART_FIFO_OFFSET)) {
+				port->read_status_mask |= CDNS_UART_IXR_BRK;
+				isrstatus &= ~CDNS_UART_IXR_FRAMING;
 			}
 		}
-		xuartps_writel(XUARTPS_IXR_FRAMING, XUARTPS_ISR_OFFSET);
+		cdns_uart_writel(CDNS_UART_IXR_FRAMING, CDNS_UART_ISR_OFFSET);
 	}
 
 	/* drop byte with parity error if IGNPAR specified */
-	if (isrstatus & port->ignore_status_mask & XUARTPS_IXR_PARITY)
-		isrstatus &= ~(XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT);
+	if (isrstatus & port->ignore_status_mask & CDNS_UART_IXR_PARITY)
+		isrstatus &= ~(CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT);
 
 	isrstatus &= port->read_status_mask;
 	isrstatus &= ~port->ignore_status_mask;
 
-	if ((isrstatus & XUARTPS_IXR_TOUT) ||
-		(isrstatus & XUARTPS_IXR_RXTRIG)) {
+	if ((isrstatus & CDNS_UART_IXR_TOUT) ||
+		(isrstatus & CDNS_UART_IXR_RXTRIG)) {
 		/* Receive Timeout Interrupt */
-		while ((xuartps_readl(XUARTPS_SR_OFFSET) &
-			XUARTPS_SR_RXEMPTY) != XUARTPS_SR_RXEMPTY) {
-			data = xuartps_readl(XUARTPS_FIFO_OFFSET);
+		while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+			CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
+			data = cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
 
 			/* Non-NULL byte after BREAK is garbage (99%) */
 			if (data && (port->read_status_mask &
-						XUARTPS_IXR_BRK)) {
-				port->read_status_mask &= ~XUARTPS_IXR_BRK;
+						CDNS_UART_IXR_BRK)) {
+				port->read_status_mask &= ~CDNS_UART_IXR_BRK;
 				port->icount.brk++;
 				if (uart_handle_break(port))
 					continue;
@@ -258,16 +245,17 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 
 			port->icount.rx++;
 
-			if (isrstatus & XUARTPS_IXR_PARITY) {
+			if (isrstatus & CDNS_UART_IXR_PARITY) {
 				port->icount.parity++;
 				status = TTY_PARITY;
-			} else if (isrstatus & XUARTPS_IXR_FRAMING) {
+			} else if (isrstatus & CDNS_UART_IXR_FRAMING) {
 				port->icount.frame++;
 				status = TTY_FRAME;
-			} else if (isrstatus & XUARTPS_IXR_OVERRUN)
+			} else if (isrstatus & CDNS_UART_IXR_OVERRUN) {
 				port->icount.overrun++;
+			}
 
-			uart_insert_char(port, isrstatus, XUARTPS_IXR_OVERRUN,
+			uart_insert_char(port, isrstatus, CDNS_UART_IXR_OVERRUN,
 					data, status);
 		}
 		spin_unlock(&port->lock);
@@ -276,10 +264,10 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 	}
 
 	/* Dispatch an appropriate handler */
-	if ((isrstatus & XUARTPS_IXR_TXEMPTY) == XUARTPS_IXR_TXEMPTY) {
+	if ((isrstatus & CDNS_UART_IXR_TXEMPTY) == CDNS_UART_IXR_TXEMPTY) {
 		if (uart_circ_empty(&port->state->xmit)) {
-			xuartps_writel(XUARTPS_IXR_TXEMPTY,
-						XUARTPS_IDR_OFFSET);
+			cdns_uart_writel(CDNS_UART_IXR_TXEMPTY,
+						CDNS_UART_IDR_OFFSET);
 		} else {
 			numbytes = port->fifosize;
 			/* Break if no more data available in the UART buffer */
@@ -287,12 +275,12 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 				if (uart_circ_empty(&port->state->xmit))
 					break;
 				/* Get the data from the UART circular buffer
-				 * and write it to the xuartps's TX_FIFO
+				 * and write it to the cdns_uart's TX_FIFO
 				 * register.
 				 */
-				xuartps_writel(
+				cdns_uart_writel(
 					port->state->xmit.buf[port->state->xmit.
-					tail], XUARTPS_FIFO_OFFSET);
+					tail], CDNS_UART_FIFO_OFFSET);
 
 				port->icount.tx++;
 
@@ -300,7 +288,7 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 				 * the buffer if it reaches limit.
 				 */
 				port->state->xmit.tail =
-					(port->state->xmit.tail + 1) & \
+					(port->state->xmit.tail + 1) &
 						(UART_XMIT_SIZE - 1);
 			}
 
@@ -310,7 +298,7 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 		}
 	}
 
-	xuartps_writel(isrstatus, XUARTPS_ISR_OFFSET);
+	cdns_uart_writel(isrstatus, CDNS_UART_ISR_OFFSET);
 
 	/* be sure to release the lock and tty before leaving */
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -319,13 +307,13 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
 }
 
 /**
- * xuartps_calc_baud_divs - Calculate baud rate divisors
+ * cdns_uart_calc_baud_divs - Calculate baud rate divisors
  * @clk: UART module input clock
  * @baud: Desired baud rate
  * @rbdiv: BDIV value (return value)
  * @rcd: CD value (return value)
  * @div8: Value for clk_sel bit in mod (return value)
- * Returns baud rate, requested baud when possible, or actual baud when there
+ * Return: baud rate, requested baud when possible, or actual baud when there
  *	was too much error, zero if no valid divisors are found.
  *
  * Formula to obtain baud rate is
@@ -338,8 +326,8 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
  *			baud rate generate register
  *			baud rate clock divisor register
  */
-static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud,
-		u32 *rbdiv, u32 *rcd, int *div8)
+static unsigned int cdns_uart_calc_baud_divs(unsigned int clk,
+		unsigned int baud, u32 *rbdiv, u32 *rcd, int *div8)
 {
 	u32 cd, bdiv;
 	unsigned int calc_baud;
@@ -347,16 +335,16 @@ static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud,
 	unsigned int bauderror;
 	unsigned int besterror = ~0;
 
-	if (baud < clk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX)) {
+	if (baud < clk / ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX)) {
 		*div8 = 1;
 		clk /= 8;
 	} else {
 		*div8 = 0;
 	}
 
-	for (bdiv = XUARTPS_BDIV_MIN; bdiv <= XUARTPS_BDIV_MAX; bdiv++) {
+	for (bdiv = CDNS_UART_BDIV_MIN; bdiv <= CDNS_UART_BDIV_MAX; bdiv++) {
 		cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1));
-		if (cd < 1 || cd > XUARTPS_CD_MAX)
+		if (cd < 1 || cd > CDNS_UART_CD_MAX)
 			continue;
 
 		calc_baud = clk / (cd * (bdiv + 1));
@@ -381,47 +369,47 @@ static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud,
 }
 
 /**
- * xuartps_set_baud_rate - Calculate and set the baud rate
+ * cdns_uart_set_baud_rate - Calculate and set the baud rate
  * @port: Handle to the uart port structure
  * @baud: Baud rate to set
- * Returns baud rate, requested baud when possible, or actual baud when there
+ * Return: baud rate, requested baud when possible, or actual baud when there
  *	   was too much error, zero if no valid divisors are found.
  */
-static unsigned int xuartps_set_baud_rate(struct uart_port *port,
+static unsigned int cdns_uart_set_baud_rate(struct uart_port *port,
 		unsigned int baud)
 {
 	unsigned int calc_baud;
 	u32 cd = 0, bdiv = 0;
 	u32 mreg;
 	int div8;
-	struct xuartps *xuartps = port->private_data;
+	struct cdns_uart *cdns_uart = port->private_data;
 
-	calc_baud = xuartps_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
+	calc_baud = cdns_uart_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
 			&div8);
 
 	/* Write new divisors to hardware */
-	mreg = xuartps_readl(XUARTPS_MR_OFFSET);
+	mreg = cdns_uart_readl(CDNS_UART_MR_OFFSET);
 	if (div8)
-		mreg |= XUARTPS_MR_CLKSEL;
+		mreg |= CDNS_UART_MR_CLKSEL;
 	else
-		mreg &= ~XUARTPS_MR_CLKSEL;
-	xuartps_writel(mreg, XUARTPS_MR_OFFSET);
-	xuartps_writel(cd, XUARTPS_BAUDGEN_OFFSET);
-	xuartps_writel(bdiv, XUARTPS_BAUDDIV_OFFSET);
-	xuartps->baud = baud;
+		mreg &= ~CDNS_UART_MR_CLKSEL;
+	cdns_uart_writel(mreg, CDNS_UART_MR_OFFSET);
+	cdns_uart_writel(cd, CDNS_UART_BAUDGEN_OFFSET);
+	cdns_uart_writel(bdiv, CDNS_UART_BAUDDIV_OFFSET);
+	cdns_uart->baud = baud;
 
 	return calc_baud;
 }
 
 #ifdef CONFIG_COMMON_CLK
 /**
- * xuartps_clk_notitifer_cb - Clock notifier callback
+ * cdns_uart_clk_notitifer_cb - Clock notifier callback
  * @nb:		Notifier block
  * @event:	Notify event
  * @data:	Notifier data
- * Returns NOTIFY_OK on success, NOTIFY_BAD on error.
+ * Return:	NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error.
  */
-static int xuartps_clk_notifier_cb(struct notifier_block *nb,
+static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
 		unsigned long event, void *data)
 {
 	u32 ctrl_reg;
@@ -429,35 +417,36 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
 	int locked = 0;
 	struct clk_notifier_data *ndata = data;
 	unsigned long flags = 0;
-	struct xuartps *xuartps = to_xuartps(nb);
+	struct cdns_uart *cdns_uart = to_cdns_uart(nb);
 
-	port = xuartps->port;
+	port = cdns_uart->port;
 	if (port->suspended)
 		return NOTIFY_OK;
 
 	switch (event) {
 	case PRE_RATE_CHANGE:
 	{
-		u32 bdiv;
-		u32 cd;
+		u32 bdiv, cd;
 		int div8;
 
 		/*
 		 * Find out if current baud-rate can be achieved with new clock
 		 * frequency.
 		 */
-		if (!xuartps_calc_baud_divs(ndata->new_rate, xuartps->baud,
-					&bdiv, &cd, &div8))
+		if (!cdns_uart_calc_baud_divs(ndata->new_rate, cdns_uart->baud,
+					&bdiv, &cd, &div8)) {
+			dev_warn(port->dev, "clock rate change rejected\n");
 			return NOTIFY_BAD;
+		}
 
-		spin_lock_irqsave(&xuartps->port->lock, flags);
+		spin_lock_irqsave(&cdns_uart->port->lock, flags);
 
 		/* Disable the TX and RX to set baud rate */
-		xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
-				(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
-				XUARTPS_CR_OFFSET);
+		ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+		ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
+		cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
-		spin_unlock_irqrestore(&xuartps->port->lock, flags);
+		spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
 
 		return NOTIFY_OK;
 	}
@@ -467,25 +456,25 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
 		 * frequency.
 		 */
 
-		spin_lock_irqsave(&xuartps->port->lock, flags);
+		spin_lock_irqsave(&cdns_uart->port->lock, flags);
 
 		locked = 1;
 		port->uartclk = ndata->new_rate;
 
-		xuartps->baud = xuartps_set_baud_rate(xuartps->port,
-				xuartps->baud);
+		cdns_uart->baud = cdns_uart_set_baud_rate(cdns_uart->port,
+				cdns_uart->baud);
 		/* fall through */
 	case ABORT_RATE_CHANGE:
 		if (!locked)
-			spin_lock_irqsave(&xuartps->port->lock, flags);
+			spin_lock_irqsave(&cdns_uart->port->lock, flags);
 
 		/* Set TX/RX Reset */
-		xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
-				(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
-				XUARTPS_CR_OFFSET);
+		ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+		ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
+		cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
-		while (xuartps_readl(XUARTPS_CR_OFFSET) &
-				(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
+		while (cdns_uart_readl(CDNS_UART_CR_OFFSET) &
+				(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
 			cpu_relax();
 
 		/*
@@ -493,14 +482,13 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
 		 * enable bit and RX enable bit to enable the transmitter and
 		 * receiver.
 		 */
-		xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
-		ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
-		xuartps_writel(
-			(ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
-			(XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
-			XUARTPS_CR_OFFSET);
+		cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
+		ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+		ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+		ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+		cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
-		spin_unlock_irqrestore(&xuartps->port->lock, flags);
+		spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
 
 		return NOTIFY_OK;
 	default:
@@ -509,40 +497,36 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
 }
 #endif
 
-/*----------------------Uart Operations---------------------------*/
-
 /**
- * xuartps_start_tx -  Start transmitting bytes
+ * cdns_uart_start_tx -  Start transmitting bytes
  * @port: Handle to the uart port structure
- *
- **/
-static void xuartps_start_tx(struct uart_port *port)
+ */
+static void cdns_uart_start_tx(struct uart_port *port)
 {
 	unsigned int status, numbytes = port->fifosize;
 
 	if (uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port))
 		return;
 
-	status = xuartps_readl(XUARTPS_CR_OFFSET);
+	status = cdns_uart_readl(CDNS_UART_CR_OFFSET);
 	/* Set the TX enable bit and clear the TX disable bit to enable the
 	 * transmitter.
 	 */
-	xuartps_writel((status & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN,
-		XUARTPS_CR_OFFSET);
-
-	while (numbytes-- && ((xuartps_readl(XUARTPS_SR_OFFSET)
-		& XUARTPS_SR_TXFULL)) != XUARTPS_SR_TXFULL) {
+	cdns_uart_writel((status & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN,
+		CDNS_UART_CR_OFFSET);
 
+	while (numbytes-- && ((cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+				CDNS_UART_SR_TXFULL)) != CDNS_UART_SR_TXFULL) {
 		/* Break if no more data available in the UART buffer */
 		if (uart_circ_empty(&port->state->xmit))
 			break;
 
 		/* Get the data from the UART circular buffer and
-		 * write it to the xuartps's TX_FIFO register.
+		 * write it to the cdns_uart's TX_FIFO register.
 		 */
-		xuartps_writel(
+		cdns_uart_writel(
 			port->state->xmit.buf[port->state->xmit.tail],
-			XUARTPS_FIFO_OFFSET);
+			CDNS_UART_FIFO_OFFSET);
 		port->icount.tx++;
 
 		/* Adjust the tail of the UART buffer and wrap
@@ -551,94 +535,90 @@ static void xuartps_start_tx(struct uart_port *port)
 		port->state->xmit.tail = (port->state->xmit.tail + 1) &
 					(UART_XMIT_SIZE - 1);
 	}
-	xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_ISR_OFFSET);
+	cdns_uart_writel(CDNS_UART_IXR_TXEMPTY, CDNS_UART_ISR_OFFSET);
 	/* Enable the TX Empty interrupt */
-	xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_IER_OFFSET);
+	cdns_uart_writel(CDNS_UART_IXR_TXEMPTY, CDNS_UART_IER_OFFSET);
 
 	if (uart_circ_chars_pending(&port->state->xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 }
 
 /**
- * xuartps_stop_tx - Stop TX
+ * cdns_uart_stop_tx - Stop TX
  * @port: Handle to the uart port structure
- *
- **/
-static void xuartps_stop_tx(struct uart_port *port)
+ */
+static void cdns_uart_stop_tx(struct uart_port *port)
 {
 	unsigned int regval;
 
-	regval = xuartps_readl(XUARTPS_CR_OFFSET);
-	regval |= XUARTPS_CR_TX_DIS;
+	regval = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+	regval |= CDNS_UART_CR_TX_DIS;
 	/* Disable the transmitter */
-	xuartps_writel(regval, XUARTPS_CR_OFFSET);
+	cdns_uart_writel(regval, CDNS_UART_CR_OFFSET);
 }
 
 /**
- * xuartps_stop_rx - Stop RX
+ * cdns_uart_stop_rx - Stop RX
  * @port: Handle to the uart port structure
- *
- **/
-static void xuartps_stop_rx(struct uart_port *port)
+ */
+static void cdns_uart_stop_rx(struct uart_port *port)
 {
 	unsigned int regval;
 
-	regval = xuartps_readl(XUARTPS_CR_OFFSET);
-	regval |= XUARTPS_CR_RX_DIS;
+	regval = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+	regval |= CDNS_UART_CR_RX_DIS;
 	/* Disable the receiver */
-	xuartps_writel(regval, XUARTPS_CR_OFFSET);
+	cdns_uart_writel(regval, CDNS_UART_CR_OFFSET);
 }
 
 /**
- * xuartps_tx_empty -  Check whether TX is empty
+ * cdns_uart_tx_empty -  Check whether TX is empty
  * @port: Handle to the uart port structure
  *
- * Returns TIOCSER_TEMT on success, 0 otherwise
- **/
-static unsigned int xuartps_tx_empty(struct uart_port *port)
+ * Return: TIOCSER_TEMT on success, 0 otherwise
+ */
+static unsigned int cdns_uart_tx_empty(struct uart_port *port)
 {
 	unsigned int status;
 
-	status = xuartps_readl(XUARTPS_ISR_OFFSET) & XUARTPS_IXR_TXEMPTY;
+	status = cdns_uart_readl(CDNS_UART_ISR_OFFSET) & CDNS_UART_IXR_TXEMPTY;
 	return status ? TIOCSER_TEMT : 0;
 }
 
 /**
- * xuartps_break_ctl - Based on the input ctl we have to start or stop
+ * cdns_uart_break_ctl - Based on the input ctl we have to start or stop
  *			transmitting char breaks
  * @port: Handle to the uart port structure
  * @ctl: Value based on which start or stop decision is taken
- *
- **/
-static void xuartps_break_ctl(struct uart_port *port, int ctl)
+ */
+static void cdns_uart_break_ctl(struct uart_port *port, int ctl)
 {
 	unsigned int status;
 	unsigned long flags;
 
 	spin_lock_irqsave(&port->lock, flags);
 
-	status = xuartps_readl(XUARTPS_CR_OFFSET);
+	status = cdns_uart_readl(CDNS_UART_CR_OFFSET);
 
 	if (ctl == -1)
-		xuartps_writel(XUARTPS_CR_STARTBRK | status,
-					XUARTPS_CR_OFFSET);
+		cdns_uart_writel(CDNS_UART_CR_STARTBRK | status,
+					CDNS_UART_CR_OFFSET);
 	else {
-		if ((status & XUARTPS_CR_STOPBRK) == 0)
-			xuartps_writel(XUARTPS_CR_STOPBRK | status,
-					 XUARTPS_CR_OFFSET);
+		if ((status & CDNS_UART_CR_STOPBRK) == 0)
+			cdns_uart_writel(CDNS_UART_CR_STOPBRK | status,
+					 CDNS_UART_CR_OFFSET);
 	}
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 /**
- * xuartps_set_termios - termios operations, handling data length, parity,
+ * cdns_uart_set_termios - termios operations, handling data length, parity,
  *				stop bits, flow control, baud rate
  * @port: Handle to the uart port structure
  * @termios: Handle to the input termios structure
  * @old: Values of the previously saved termios structure
- *
- **/
-static void xuartps_set_termios(struct uart_port *port,
+ */
+static void cdns_uart_set_termios(struct uart_port *port,
 				struct ktermios *termios, struct ktermios *old)
 {
 	unsigned int cval = 0;
@@ -649,81 +629,79 @@ static void xuartps_set_termios(struct uart_port *port,
 	spin_lock_irqsave(&port->lock, flags);
 
 	/* Empty the receive FIFO 1st before making changes */
-	while ((xuartps_readl(XUARTPS_SR_OFFSET) &
-		 XUARTPS_SR_RXEMPTY) != XUARTPS_SR_RXEMPTY) {
-		xuartps_readl(XUARTPS_FIFO_OFFSET);
+	while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+		 CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
+		cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
 	}
 
 	/* Disable the TX and RX to set baud rate */
-	xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
-			(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
-			XUARTPS_CR_OFFSET);
+	ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+	ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
+	cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
 	/*
 	 * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
 	 * min and max baud should be calculated here based on port->uartclk.
 	 * this way we get a valid baud and can safely call set_baud()
 	 */
-	minbaud = port->uartclk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX * 8);
-	maxbaud = port->uartclk / (XUARTPS_BDIV_MIN + 1);
+	minbaud = port->uartclk /
+			((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX * 8);
+	maxbaud = port->uartclk / (CDNS_UART_BDIV_MIN + 1);
 	baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud);
-	baud = xuartps_set_baud_rate(port, baud);
+	baud = cdns_uart_set_baud_rate(port, baud);
 	if (tty_termios_baud_rate(termios))
 		tty_termios_encode_baud_rate(termios, baud, baud);
 
-	/*
-	 * Update the per-port timeout.
-	 */
+	/* Update the per-port timeout. */
 	uart_update_timeout(port, termios->c_cflag, baud);
 
 	/* Set TX/RX Reset */
-	xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
-			(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
-			XUARTPS_CR_OFFSET);
+	ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+	ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
+	cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
-	ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
-
-	/* Clear the RX disable and TX disable bits and then set the TX enable
+	/*
+	 * Clear the RX disable and TX disable bits and then set the TX enable
 	 * bit and RX enable bit to enable the transmitter and receiver.
 	 */
-	xuartps_writel(
-		(ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS))
-			| (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
-			XUARTPS_CR_OFFSET);
+	ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+	ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+	ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+	cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
-	xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
+	cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
 
-	port->read_status_mask = XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_RXTRIG |
-			XUARTPS_IXR_OVERRUN | XUARTPS_IXR_TOUT;
+	port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG |
+			CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT;
 	port->ignore_status_mask = 0;
 
 	if (termios->c_iflag & INPCK)
-		port->read_status_mask |= XUARTPS_IXR_PARITY |
-		XUARTPS_IXR_FRAMING;
+		port->read_status_mask |= CDNS_UART_IXR_PARITY |
+		CDNS_UART_IXR_FRAMING;
 
 	if (termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= XUARTPS_IXR_PARITY |
-			XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN;
+		port->ignore_status_mask |= CDNS_UART_IXR_PARITY |
+			CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
 
 	/* ignore all characters if CREAD is not set */
 	if ((termios->c_cflag & CREAD) == 0)
-		port->ignore_status_mask |= XUARTPS_IXR_RXTRIG |
-			XUARTPS_IXR_TOUT | XUARTPS_IXR_PARITY |
-			XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN;
+		port->ignore_status_mask |= CDNS_UART_IXR_RXTRIG |
+			CDNS_UART_IXR_TOUT | CDNS_UART_IXR_PARITY |
+			CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
 
-	mode_reg = xuartps_readl(XUARTPS_MR_OFFSET);
+	mode_reg = cdns_uart_readl(CDNS_UART_MR_OFFSET);
 
 	/* Handling Data Size */
 	switch (termios->c_cflag & CSIZE) {
 	case CS6:
-		cval |= XUARTPS_MR_CHARLEN_6_BIT;
+		cval |= CDNS_UART_MR_CHARLEN_6_BIT;
 		break;
 	case CS7:
-		cval |= XUARTPS_MR_CHARLEN_7_BIT;
+		cval |= CDNS_UART_MR_CHARLEN_7_BIT;
 		break;
 	default:
 	case CS8:
-		cval |= XUARTPS_MR_CHARLEN_8_BIT;
+		cval |= CDNS_UART_MR_CHARLEN_8_BIT;
 		termios->c_cflag &= ~CSIZE;
 		termios->c_cflag |= CS8;
 		break;
@@ -731,134 +709,135 @@ static void xuartps_set_termios(struct uart_port *port,
 
 	/* Handling Parity and Stop Bits length */
 	if (termios->c_cflag & CSTOPB)
-		cval |= XUARTPS_MR_STOPMODE_2_BIT; /* 2 STOP bits */
+		cval |= CDNS_UART_MR_STOPMODE_2_BIT; /* 2 STOP bits */
 	else
-		cval |= XUARTPS_MR_STOPMODE_1_BIT; /* 1 STOP bit */
+		cval |= CDNS_UART_MR_STOPMODE_1_BIT; /* 1 STOP bit */
 
 	if (termios->c_cflag & PARENB) {
 		/* Mark or Space parity */
 		if (termios->c_cflag & CMSPAR) {
 			if (termios->c_cflag & PARODD)
-				cval |= XUARTPS_MR_PARITY_MARK;
+				cval |= CDNS_UART_MR_PARITY_MARK;
 			else
-				cval |= XUARTPS_MR_PARITY_SPACE;
+				cval |= CDNS_UART_MR_PARITY_SPACE;
 		} else {
 			if (termios->c_cflag & PARODD)
-				cval |= XUARTPS_MR_PARITY_ODD;
+				cval |= CDNS_UART_MR_PARITY_ODD;
 			else
-				cval |= XUARTPS_MR_PARITY_EVEN;
+				cval |= CDNS_UART_MR_PARITY_EVEN;
 		}
 	} else {
-		cval |= XUARTPS_MR_PARITY_NONE;
+		cval |= CDNS_UART_MR_PARITY_NONE;
 	}
 	cval |= mode_reg & 1;
-	xuartps_writel(cval, XUARTPS_MR_OFFSET);
+	cdns_uart_writel(cval, CDNS_UART_MR_OFFSET);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 /**
- * xuartps_startup - Called when an application opens a xuartps port
+ * cdns_uart_startup - Called when an application opens a cdns_uart port
  * @port: Handle to the uart port structure
  *
- * Returns 0 on success, negative error otherwise
- **/
-static int xuartps_startup(struct uart_port *port)
+ * Return: 0 on success, negative errno otherwise
+ */
+static int cdns_uart_startup(struct uart_port *port)
 {
 	unsigned int retval = 0, status = 0;
 
-	retval = request_irq(port->irq, xuartps_isr, 0, XUARTPS_NAME,
+	retval = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME,
 								(void *)port);
 	if (retval)
 		return retval;
 
 	/* Disable the TX and RX */
-	xuartps_writel(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS,
-						XUARTPS_CR_OFFSET);
+	cdns_uart_writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
+						CDNS_UART_CR_OFFSET);
 
 	/* Set the Control Register with TX/RX Enable, TX/RX Reset,
 	 * no break chars.
 	 */
-	xuartps_writel(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST,
-				XUARTPS_CR_OFFSET);
+	cdns_uart_writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
+				CDNS_UART_CR_OFFSET);
 
-	status = xuartps_readl(XUARTPS_CR_OFFSET);
+	status = cdns_uart_readl(CDNS_UART_CR_OFFSET);
 
 	/* Clear the RX disable and TX disable bits and then set the TX enable
 	 * bit and RX enable bit to enable the transmitter and receiver.
 	 */
-	xuartps_writel((status & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS))
-			| (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN |
-			XUARTPS_CR_STOPBRK), XUARTPS_CR_OFFSET);
+	cdns_uart_writel((status & ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS))
+			| (CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN |
+			CDNS_UART_CR_STOPBRK), CDNS_UART_CR_OFFSET);
 
 	/* Set the Mode Register with normal mode,8 data bits,1 stop bit,
 	 * no parity.
 	 */
-	xuartps_writel(XUARTPS_MR_CHMODE_NORM | XUARTPS_MR_STOPMODE_1_BIT
-		| XUARTPS_MR_PARITY_NONE | XUARTPS_MR_CHARLEN_8_BIT,
-		 XUARTPS_MR_OFFSET);
+	cdns_uart_writel(CDNS_UART_MR_CHMODE_NORM | CDNS_UART_MR_STOPMODE_1_BIT
+		| CDNS_UART_MR_PARITY_NONE | CDNS_UART_MR_CHARLEN_8_BIT,
+		 CDNS_UART_MR_OFFSET);
 
 	/*
 	 * Set the RX FIFO Trigger level to use most of the FIFO, but it
 	 * can be tuned with a module parameter
 	 */
-	xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET);
+	cdns_uart_writel(rx_trigger_level, CDNS_UART_RXWM_OFFSET);
 
 	/*
 	 * Receive Timeout register is enabled but it
 	 * can be tuned with a module parameter
 	 */
-	xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
+	cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
 
 	/* Clear out any pending interrupts before enabling them */
-	xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);
+	cdns_uart_writel(cdns_uart_readl(CDNS_UART_ISR_OFFSET),
+			CDNS_UART_ISR_OFFSET);
 
 	/* Set the Interrupt Registers with desired interrupts */
-	xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY |
-		XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN |
-		XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT, XUARTPS_IER_OFFSET);
+	cdns_uart_writel(CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_PARITY |
+		CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN |
+		CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT,
+		CDNS_UART_IER_OFFSET);
 
 	return retval;
 }
 
 /**
- * xuartps_shutdown - Called when an application closes a xuartps port
+ * cdns_uart_shutdown - Called when an application closes a cdns_uart port
  * @port: Handle to the uart port structure
- *
- **/
-static void xuartps_shutdown(struct uart_port *port)
+ */
+static void cdns_uart_shutdown(struct uart_port *port)
 {
 	int status;
 
 	/* Disable interrupts */
-	status = xuartps_readl(XUARTPS_IMR_OFFSET);
-	xuartps_writel(status, XUARTPS_IDR_OFFSET);
+	status = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+	cdns_uart_writel(status, CDNS_UART_IDR_OFFSET);
 
 	/* Disable the TX and RX */
-	xuartps_writel(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS,
-				 XUARTPS_CR_OFFSET);
+	cdns_uart_writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
+				 CDNS_UART_CR_OFFSET);
 	free_irq(port->irq, port);
 }
 
 /**
- * xuartps_type - Set UART type to xuartps port
+ * cdns_uart_type - Set UART type to cdns_uart port
  * @port: Handle to the uart port structure
  *
- * Returns string on success, NULL otherwise
- **/
-static const char *xuartps_type(struct uart_port *port)
+ * Return: string on success, NULL otherwise
+ */
+static const char *cdns_uart_type(struct uart_port *port)
 {
-	return port->type == PORT_XUARTPS ? XUARTPS_NAME : NULL;
+	return port->type == PORT_XUARTPS ? CDNS_UART_NAME : NULL;
 }
 
 /**
- * xuartps_verify_port - Verify the port params
+ * cdns_uart_verify_port - Verify the port params
  * @port: Handle to the uart port structure
  * @ser: Handle to the structure whose members are compared
  *
- * Returns 0 if success otherwise -EINVAL
- **/
-static int xuartps_verify_port(struct uart_port *port,
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_uart_verify_port(struct uart_port *port,
 					struct serial_struct *ser)
 {
 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_XUARTPS)
@@ -875,187 +854,170 @@ static int xuartps_verify_port(struct uart_port *port,
 }
 
 /**
- * xuartps_request_port - Claim the memory region attached to xuartps port,
- *				called when the driver adds a xuartps port via
+ * cdns_uart_request_port - Claim the memory region attached to cdns_uart port,
+ *				called when the driver adds a cdns_uart port via
  *				uart_add_one_port()
  * @port: Handle to the uart port structure
  *
- * Returns 0, -ENOMEM if request fails
- **/
-static int xuartps_request_port(struct uart_port *port)
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_uart_request_port(struct uart_port *port)
 {
-	if (!request_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE,
-					 XUARTPS_NAME)) {
+	if (!request_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE,
+					 CDNS_UART_NAME)) {
 		return -ENOMEM;
 	}
 
-	port->membase = ioremap(port->mapbase, XUARTPS_REGISTER_SPACE);
+	port->membase = ioremap(port->mapbase, CDNS_UART_REGISTER_SPACE);
 	if (!port->membase) {
 		dev_err(port->dev, "Unable to map registers\n");
-		release_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE);
+		release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
 		return -ENOMEM;
 	}
 	return 0;
 }
 
 /**
- * xuartps_release_port - Release the memory region attached to a xuartps
- *				port, called when the driver removes a xuartps
- *				port via uart_remove_one_port().
+ * cdns_uart_release_port - Release UART port
  * @port: Handle to the uart port structure
  *
- **/
-static void xuartps_release_port(struct uart_port *port)
+ * Release the memory region attached to a cdns_uart port. Called when the
+ * driver removes a cdns_uart port via uart_remove_one_port().
+ */
+static void cdns_uart_release_port(struct uart_port *port)
 {
-	release_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE);
+	release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
 	iounmap(port->membase);
 	port->membase = NULL;
 }
 
 /**
- * xuartps_config_port - Configure xuartps, called when the driver adds a
- *				xuartps port
+ * cdns_uart_config_port - Configure UART port
  * @port: Handle to the uart port structure
  * @flags: If any
- *
- **/
-static void xuartps_config_port(struct uart_port *port, int flags)
+ */
+static void cdns_uart_config_port(struct uart_port *port, int flags)
 {
-	if (flags & UART_CONFIG_TYPE && xuartps_request_port(port) == 0)
+	if (flags & UART_CONFIG_TYPE && cdns_uart_request_port(port) == 0)
 		port->type = PORT_XUARTPS;
 }
 
 /**
- * xuartps_get_mctrl - Get the modem control state
- *
+ * cdns_uart_get_mctrl - Get the modem control state
  * @port: Handle to the uart port structure
  *
- * Returns the modem control state
- *
- **/
-static unsigned int xuartps_get_mctrl(struct uart_port *port)
+ * Return: the modem control state
+ */
+static unsigned int cdns_uart_get_mctrl(struct uart_port *port)
 {
 	return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
 }
 
-static void xuartps_set_mctrl(struct uart_port *port, unsigned int mctrl)
+static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	/* N/A */
 }
 
-static void xuartps_enable_ms(struct uart_port *port)
+static void cdns_uart_enable_ms(struct uart_port *port)
 {
 	/* N/A */
 }
 
 #ifdef CONFIG_CONSOLE_POLL
-static int xuartps_poll_get_char(struct uart_port *port)
+static int cdns_uart_poll_get_char(struct uart_port *port)
 {
 	u32 imr;
 	int c;
 
 	/* Disable all interrupts */
-	imr = xuartps_readl(XUARTPS_IMR_OFFSET);
-	xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+	imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+	cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET);
 
 	/* Check if FIFO is empty */
-	if (xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY)
+	if (cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_RXEMPTY)
 		c = NO_POLL_CHAR;
 	else /* Read a character */
-		c = (unsigned char) xuartps_readl(XUARTPS_FIFO_OFFSET);
+		c = (unsigned char) cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
 
 	/* Enable interrupts */
-	xuartps_writel(imr, XUARTPS_IER_OFFSET);
+	cdns_uart_writel(imr, CDNS_UART_IER_OFFSET);
 
 	return c;
 }
 
-static void xuartps_poll_put_char(struct uart_port *port, unsigned char c)
+static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c)
 {
 	u32 imr;
 
 	/* Disable all interrupts */
-	imr = xuartps_readl(XUARTPS_IMR_OFFSET);
-	xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+	imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+	cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET);
 
 	/* Wait until FIFO is empty */
-	while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY))
+	while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY))
 		cpu_relax();
 
 	/* Write a character */
-	xuartps_writel(c, XUARTPS_FIFO_OFFSET);
+	cdns_uart_writel(c, CDNS_UART_FIFO_OFFSET);
 
 	/* Wait until FIFO is empty */
-	while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY))
+	while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY))
 		cpu_relax();
 
 	/* Enable interrupts */
-	xuartps_writel(imr, XUARTPS_IER_OFFSET);
+	cdns_uart_writel(imr, CDNS_UART_IER_OFFSET);
 
 	return;
 }
 #endif
 
-/** The UART operations structure
- */
-static struct uart_ops xuartps_ops = {
-	.set_mctrl	= xuartps_set_mctrl,
-	.get_mctrl	= xuartps_get_mctrl,
-	.enable_ms	= xuartps_enable_ms,
-
-	.start_tx	= xuartps_start_tx,	/* Start transmitting */
-	.stop_tx	= xuartps_stop_tx,	/* Stop transmission */
-	.stop_rx	= xuartps_stop_rx,	/* Stop reception */
-	.tx_empty	= xuartps_tx_empty,	/* Transmitter busy? */
-	.break_ctl	= xuartps_break_ctl,	/* Start/stop
-						 * transmitting break
-						 */
-	.set_termios	= xuartps_set_termios,	/* Set termios */
-	.startup	= xuartps_startup,	/* App opens xuartps */
-	.shutdown	= xuartps_shutdown,	/* App closes xuartps */
-	.type		= xuartps_type,		/* Set UART type */
-	.verify_port	= xuartps_verify_port,	/* Verification of port
-						 * params
-						 */
-	.request_port	= xuartps_request_port,	/* Claim resources
-						 * associated with a
-						 * xuartps port
-						 */
-	.release_port	= xuartps_release_port,	/* Release resources
-						 * associated with a
-						 * xuartps port
-						 */
-	.config_port	= xuartps_config_port,	/* Configure when driver
-						 * adds a xuartps port
-						 */
+static struct uart_ops cdns_uart_ops = {
+	.set_mctrl	= cdns_uart_set_mctrl,
+	.get_mctrl	= cdns_uart_get_mctrl,
+	.enable_ms	= cdns_uart_enable_ms,
+	.start_tx	= cdns_uart_start_tx,
+	.stop_tx	= cdns_uart_stop_tx,
+	.stop_rx	= cdns_uart_stop_rx,
+	.tx_empty	= cdns_uart_tx_empty,
+	.break_ctl	= cdns_uart_break_ctl,
+	.set_termios	= cdns_uart_set_termios,
+	.startup	= cdns_uart_startup,
+	.shutdown	= cdns_uart_shutdown,
+	.type		= cdns_uart_type,
+	.verify_port	= cdns_uart_verify_port,
+	.request_port	= cdns_uart_request_port,
+	.release_port	= cdns_uart_release_port,
+	.config_port	= cdns_uart_config_port,
 #ifdef CONFIG_CONSOLE_POLL
-	.poll_get_char	= xuartps_poll_get_char,
-	.poll_put_char	= xuartps_poll_put_char,
+	.poll_get_char	= cdns_uart_poll_get_char,
+	.poll_put_char	= cdns_uart_poll_put_char,
 #endif
 };
 
-static struct uart_port xuartps_port[2];
+static struct uart_port cdns_uart_port[2];
 
 /**
- * xuartps_get_port - Configure the port from the platform device resource
- *			info
+ * cdns_uart_get_port - Configure the port from platform device resource info
+ * @id: Port id
  *
- * Returns a pointer to a uart_port or NULL for failure
- **/
-static struct uart_port *xuartps_get_port(void)
+ * Return: a pointer to a uart_port or NULL for failure
+ */
+static struct uart_port *cdns_uart_get_port(int id)
 {
 	struct uart_port *port;
-	int id;
 
-	/* Find the next unused port */
-	for (id = 0; id < XUARTPS_NR_PORTS; id++)
-		if (xuartps_port[id].mapbase == 0)
-			break;
+	/* Try the given port id if failed use default method */
+	if (cdns_uart_port[id].mapbase != 0) {
+		/* Find the next unused port */
+		for (id = 0; id < CDNS_UART_NR_PORTS; id++)
+			if (cdns_uart_port[id].mapbase == 0)
+				break;
+	}
 
-	if (id >= XUARTPS_NR_PORTS)
+	if (id >= CDNS_UART_NR_PORTS)
 		return NULL;
 
-	port = &xuartps_port[id];
+	port = &cdns_uart_port[id];
 
 	/* At this point, we've got an empty uart_port struct, initialize it */
 	spin_lock_init(&port->lock);
@@ -1065,50 +1027,46 @@ static struct uart_port *xuartps_get_port(void)
 	port->type	= PORT_UNKNOWN;
 	port->iotype	= UPIO_MEM32;
 	port->flags	= UPF_BOOT_AUTOCONF;
-	port->ops	= &xuartps_ops;
-	port->fifosize	= XUARTPS_FIFO_SIZE;
+	port->ops	= &cdns_uart_ops;
+	port->fifosize	= CDNS_UART_FIFO_SIZE;
 	port->line	= id;
 	port->dev	= NULL;
 	return port;
 }
 
-/*-----------------------Console driver operations--------------------------*/
-
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
 /**
- * xuartps_console_wait_tx - Wait for the TX to be full
+ * cdns_uart_console_wait_tx - Wait for the TX to be full
  * @port: Handle to the uart port structure
- *
- **/
-static void xuartps_console_wait_tx(struct uart_port *port)
+ */
+static void cdns_uart_console_wait_tx(struct uart_port *port)
 {
-	while ((xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY)
-				!= XUARTPS_SR_TXEMPTY)
+	while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY)
+				!= CDNS_UART_SR_TXEMPTY)
 		barrier();
 }
 
 /**
- * xuartps_console_putchar - write the character to the FIFO buffer
+ * cdns_uart_console_putchar - write the character to the FIFO buffer
  * @port: Handle to the uart port structure
  * @ch: Character to be written
- *
- **/
-static void xuartps_console_putchar(struct uart_port *port, int ch)
+ */
+static void cdns_uart_console_putchar(struct uart_port *port, int ch)
 {
-	xuartps_console_wait_tx(port);
-	xuartps_writel(ch, XUARTPS_FIFO_OFFSET);
+	cdns_uart_console_wait_tx(port);
+	cdns_uart_writel(ch, CDNS_UART_FIFO_OFFSET);
 }
 
 /**
- * xuartps_console_write - perform write operation
- * @port: Handle to the uart port structure
+ * cdns_uart_console_write - perform write operation
+ * @co: Console handle
  * @s: Pointer to character array
  * @count: No of characters
- **/
-static void xuartps_console_write(struct console *co, const char *s,
+ */
+static void cdns_uart_console_write(struct console *co, const char *s,
 				unsigned int count)
 {
-	struct uart_port *port = &xuartps_port[co->index];
+	struct uart_port *port = &cdns_uart_port[co->index];
 	unsigned long flags;
 	unsigned int imr, ctrl;
 	int locked = 1;
@@ -1119,49 +1077,45 @@ static void xuartps_console_write(struct console *co, const char *s,
 		spin_lock_irqsave(&port->lock, flags);
 
 	/* save and disable interrupt */
-	imr = xuartps_readl(XUARTPS_IMR_OFFSET);
-	xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+	imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+	cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET);
 
 	/*
 	 * Make sure that the tx part is enabled. Set the TX enable bit and
 	 * clear the TX disable bit to enable the transmitter.
 	 */
-	ctrl = xuartps_readl(XUARTPS_CR_OFFSET);
-	xuartps_writel((ctrl & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN,
-		XUARTPS_CR_OFFSET);
+	ctrl = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+	cdns_uart_writel((ctrl & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN,
+		CDNS_UART_CR_OFFSET);
 
-	uart_console_write(port, s, count, xuartps_console_putchar);
-	xuartps_console_wait_tx(port);
+	uart_console_write(port, s, count, cdns_uart_console_putchar);
+	cdns_uart_console_wait_tx(port);
 
-	xuartps_writel(ctrl, XUARTPS_CR_OFFSET);
+	cdns_uart_writel(ctrl, CDNS_UART_CR_OFFSET);
 
-	/* restore interrupt state, it seems like there may be a h/w bug
-	 * in that the interrupt enable register should not need to be
-	 * written based on the data sheet
-	 */
-	xuartps_writel(~imr, XUARTPS_IDR_OFFSET);
-	xuartps_writel(imr, XUARTPS_IER_OFFSET);
+	/* restore interrupt state */
+	cdns_uart_writel(imr, CDNS_UART_IER_OFFSET);
 
 	if (locked)
 		spin_unlock_irqrestore(&port->lock, flags);
 }
 
 /**
- * xuartps_console_setup - Initialize the uart to default config
+ * cdns_uart_console_setup - Initialize the uart to default config
  * @co: Console handle
  * @options: Initial settings of uart
  *
- * Returns 0, -ENODEV if no device
- **/
-static int __init xuartps_console_setup(struct console *co, char *options)
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int __init cdns_uart_console_setup(struct console *co, char *options)
 {
-	struct uart_port *port = &xuartps_port[co->index];
+	struct uart_port *port = &cdns_uart_port[co->index];
 	int baud = 9600;
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';
 
-	if (co->index < 0 || co->index >= XUARTPS_NR_PORTS)
+	if (co->index < 0 || co->index >= CDNS_UART_NR_PORTS)
 		return -EINVAL;
 
 	if (!port->mapbase) {
@@ -1175,55 +1129,53 @@ static int __init xuartps_console_setup(struct console *co, char *options)
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
-static struct uart_driver xuartps_uart_driver;
+static struct uart_driver cdns_uart_uart_driver;
 
-static struct console xuartps_console = {
-	.name	= XUARTPS_TTY_NAME,
-	.write	= xuartps_console_write,
+static struct console cdns_uart_console = {
+	.name	= CDNS_UART_TTY_NAME,
+	.write	= cdns_uart_console_write,
 	.device	= uart_console_device,
-	.setup	= xuartps_console_setup,
+	.setup	= cdns_uart_console_setup,
 	.flags	= CON_PRINTBUFFER,
 	.index	= -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
-	.data	= &xuartps_uart_driver,
+	.data	= &cdns_uart_uart_driver,
 };
 
 /**
- * xuartps_console_init - Initialization call
+ * cdns_uart_console_init - Initialization call
  *
- * Returns 0 on success, negative error otherwise
- **/
-static int __init xuartps_console_init(void)
+ * Return: 0 on success, negative errno otherwise
+ */
+static int __init cdns_uart_console_init(void)
 {
-	register_console(&xuartps_console);
+	register_console(&cdns_uart_console);
 	return 0;
 }
 
-console_initcall(xuartps_console_init);
+console_initcall(cdns_uart_console_init);
 
 #endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
 
-/** Structure Definitions
- */
-static struct uart_driver xuartps_uart_driver = {
-	.owner		= THIS_MODULE,		/* Owner */
-	.driver_name	= XUARTPS_NAME,		/* Driver name */
-	.dev_name	= XUARTPS_TTY_NAME,	/* Node name */
-	.major		= XUARTPS_MAJOR,	/* Major number */
-	.minor		= XUARTPS_MINOR,	/* Minor number */
-	.nr		= XUARTPS_NR_PORTS,	/* Number of UART ports */
+static struct uart_driver cdns_uart_uart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= CDNS_UART_NAME,
+	.dev_name	= CDNS_UART_TTY_NAME,
+	.major		= CDNS_UART_MAJOR,
+	.minor		= CDNS_UART_MINOR,
+	.nr		= CDNS_UART_NR_PORTS,
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
-	.cons		= &xuartps_console,	/* Console */
+	.cons		= &cdns_uart_console,
 #endif
 };
 
 #ifdef CONFIG_PM_SLEEP
 /**
- * xuartps_suspend - suspend event
+ * cdns_uart_suspend - suspend event
  * @device: Pointer to the device structure
  *
- * Returns 0
+ * Return: 0
  */
-static int xuartps_suspend(struct device *device)
+static int cdns_uart_suspend(struct device *device)
 {
 	struct uart_port *port = dev_get_drvdata(device);
 	struct tty_struct *tty;
@@ -1242,23 +1194,24 @@ static int xuartps_suspend(struct device *device)
 	 * Call the API provided in serial_core.c file which handles
 	 * the suspend.
 	 */
-	uart_suspend_port(&xuartps_uart_driver, port);
+	uart_suspend_port(&cdns_uart_uart_driver, port);
 	if (console_suspend_enabled && !may_wake) {
-		struct xuartps *xuartps = port->private_data;
+		struct cdns_uart *cdns_uart = port->private_data;
 
-		clk_disable(xuartps->refclk);
-		clk_disable(xuartps->aperclk);
+		clk_disable(cdns_uart->uartclk);
+		clk_disable(cdns_uart->pclk);
 	} else {
 		unsigned long flags = 0;
 
 		spin_lock_irqsave(&port->lock, flags);
 		/* Empty the receive FIFO 1st before making changes */
-		while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY))
-			xuartps_readl(XUARTPS_FIFO_OFFSET);
+		while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+					CDNS_UART_SR_RXEMPTY))
+			cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
 		/* set RX trigger level to 1 */
-		xuartps_writel(1, XUARTPS_RXWM_OFFSET);
+		cdns_uart_writel(1, CDNS_UART_RXWM_OFFSET);
 		/* disable RX timeout interrups */
-		xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IDR_OFFSET);
+		cdns_uart_writel(CDNS_UART_IXR_TOUT, CDNS_UART_IDR_OFFSET);
 		spin_unlock_irqrestore(&port->lock, flags);
 	}
 
@@ -1266,12 +1219,12 @@ static int xuartps_suspend(struct device *device)
 }
 
 /**
- * xuartps_resume - Resume after a previous suspend
+ * cdns_uart_resume - Resume after a previous suspend
  * @device: Pointer to the device structure
  *
- * Returns 0
+ * Return: 0
  */
-static int xuartps_resume(struct device *device)
+static int cdns_uart_resume(struct device *device)
 {
 	struct uart_port *port = dev_get_drvdata(device);
 	unsigned long flags = 0;
@@ -1289,87 +1242,95 @@ static int xuartps_resume(struct device *device)
 	}
 
 	if (console_suspend_enabled && !may_wake) {
-		struct xuartps *xuartps = port->private_data;
+		struct cdns_uart *cdns_uart = port->private_data;
 
-		clk_enable(xuartps->aperclk);
-		clk_enable(xuartps->refclk);
+		clk_enable(cdns_uart->pclk);
+		clk_enable(cdns_uart->uartclk);
 
 		spin_lock_irqsave(&port->lock, flags);
 
 		/* Set TX/RX Reset */
-		xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
-				(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
-				XUARTPS_CR_OFFSET);
-		while (xuartps_readl(XUARTPS_CR_OFFSET) &
-				(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
+		ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+		ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
+		cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
+		while (cdns_uart_readl(CDNS_UART_CR_OFFSET) &
+				(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
 			cpu_relax();
 
 		/* restore rx timeout value */
-		xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
+		cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
 		/* Enable Tx/Rx */
-		ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
-		xuartps_writel(
-			(ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
-			(XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
-			XUARTPS_CR_OFFSET);
+		ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+		ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+		ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+		cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
 
 		spin_unlock_irqrestore(&port->lock, flags);
 	} else {
 		spin_lock_irqsave(&port->lock, flags);
 		/* restore original rx trigger level */
-		xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET);
+		cdns_uart_writel(rx_trigger_level, CDNS_UART_RXWM_OFFSET);
 		/* enable RX timeout interrupt */
-		xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IER_OFFSET);
+		cdns_uart_writel(CDNS_UART_IXR_TOUT, CDNS_UART_IER_OFFSET);
 		spin_unlock_irqrestore(&port->lock, flags);
 	}
 
-	return uart_resume_port(&xuartps_uart_driver, port);
+	return uart_resume_port(&cdns_uart_uart_driver, port);
 }
 #endif /* ! CONFIG_PM_SLEEP */
 
-static SIMPLE_DEV_PM_OPS(xuartps_dev_pm_ops, xuartps_suspend, xuartps_resume);
+static SIMPLE_DEV_PM_OPS(cdns_uart_dev_pm_ops, cdns_uart_suspend,
+		cdns_uart_resume);
 
-/* ---------------------------------------------------------------------
- * Platform bus binding
- */
 /**
- * xuartps_probe - Platform driver probe
+ * cdns_uart_probe - Platform driver probe
  * @pdev: Pointer to the platform device structure
  *
- * Returns 0 on success, negative error otherwise
- **/
-static int xuartps_probe(struct platform_device *pdev)
+ * Return: 0 on success, negative errno otherwise
+ */
+static int cdns_uart_probe(struct platform_device *pdev)
 {
-	int rc;
+	int rc, id;
 	struct uart_port *port;
 	struct resource *res, *res2;
-	struct xuartps *xuartps_data;
+	struct cdns_uart *cdns_uart_data;
 
-	xuartps_data = devm_kzalloc(&pdev->dev, sizeof(*xuartps_data),
+	cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
 			GFP_KERNEL);
-	if (!xuartps_data)
+	if (!cdns_uart_data)
 		return -ENOMEM;
 
-	xuartps_data->aperclk = devm_clk_get(&pdev->dev, "aper_clk");
-	if (IS_ERR(xuartps_data->aperclk)) {
-		dev_err(&pdev->dev, "aper_clk clock not found.\n");
-		return PTR_ERR(xuartps_data->aperclk);
+	cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(cdns_uart_data->pclk)) {
+		cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "aper_clk");
+		if (!IS_ERR(cdns_uart_data->pclk))
+			dev_err(&pdev->dev, "clock name 'aper_clk' is deprecated.\n");
 	}
-	xuartps_data->refclk = devm_clk_get(&pdev->dev, "ref_clk");
-	if (IS_ERR(xuartps_data->refclk)) {
-		dev_err(&pdev->dev, "ref_clk clock not found.\n");
-		return PTR_ERR(xuartps_data->refclk);
+	if (IS_ERR(cdns_uart_data->pclk)) {
+		dev_err(&pdev->dev, "pclk clock not found.\n");
+		return PTR_ERR(cdns_uart_data->pclk);
 	}
 
-	rc = clk_prepare_enable(xuartps_data->aperclk);
+	cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "uart_clk");
+	if (IS_ERR(cdns_uart_data->uartclk)) {
+		cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "ref_clk");
+		if (!IS_ERR(cdns_uart_data->uartclk))
+			dev_err(&pdev->dev, "clock name 'ref_clk' is deprecated.\n");
+	}
+	if (IS_ERR(cdns_uart_data->uartclk)) {
+		dev_err(&pdev->dev, "uart_clk clock not found.\n");
+		return PTR_ERR(cdns_uart_data->uartclk);
+	}
+
+	rc = clk_prepare_enable(cdns_uart_data->pclk);
 	if (rc) {
-		dev_err(&pdev->dev, "Unable to enable APER clock.\n");
+		dev_err(&pdev->dev, "Unable to enable pclk clock.\n");
 		return rc;
 	}
-	rc = clk_prepare_enable(xuartps_data->refclk);
+	rc = clk_prepare_enable(cdns_uart_data->uartclk);
 	if (rc) {
 		dev_err(&pdev->dev, "Unable to enable device clock.\n");
-		goto err_out_clk_dis_aper;
+		goto err_out_clk_dis_pclk;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1385,15 +1346,19 @@ static int xuartps_probe(struct platform_device *pdev)
 	}
 
 #ifdef CONFIG_COMMON_CLK
-	xuartps_data->clk_rate_change_nb.notifier_call =
-			xuartps_clk_notifier_cb;
-	if (clk_notifier_register(xuartps_data->refclk,
-				&xuartps_data->clk_rate_change_nb))
+	cdns_uart_data->clk_rate_change_nb.notifier_call =
+			cdns_uart_clk_notifier_cb;
+	if (clk_notifier_register(cdns_uart_data->uartclk,
+				&cdns_uart_data->clk_rate_change_nb))
 		dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
 #endif
+	/* Look for a serialN alias */
+	id = of_alias_get_id(pdev->dev.of_node, "serial");
+	if (id < 0)
+		id = 0;
 
 	/* Initialize the port structure */
-	port = xuartps_get_port();
+	port = cdns_uart_get_port(id);
 
 	if (!port) {
 		dev_err(&pdev->dev, "Cannot get uart_port structure\n");
@@ -1407,11 +1372,11 @@ static int xuartps_probe(struct platform_device *pdev)
 		port->mapbase = res->start;
 		port->irq = res2->start;
 		port->dev = &pdev->dev;
-		port->uartclk = clk_get_rate(xuartps_data->refclk);
-		port->private_data = xuartps_data;
-		xuartps_data->port = port;
+		port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
+		port->private_data = cdns_uart_data;
+		cdns_uart_data->port = port;
 		platform_set_drvdata(pdev, port);
-		rc = uart_add_one_port(&xuartps_uart_driver, port);
+		rc = uart_add_one_port(&cdns_uart_uart_driver, port);
 		if (rc) {
 			dev_err(&pdev->dev,
 				"uart_add_one_port() failed; err=%i\n", rc);
@@ -1422,103 +1387,89 @@ static int xuartps_probe(struct platform_device *pdev)
 
 err_out_notif_unreg:
 #ifdef CONFIG_COMMON_CLK
-	clk_notifier_unregister(xuartps_data->refclk,
-			&xuartps_data->clk_rate_change_nb);
+	clk_notifier_unregister(cdns_uart_data->uartclk,
+			&cdns_uart_data->clk_rate_change_nb);
 #endif
 err_out_clk_disable:
-	clk_disable_unprepare(xuartps_data->refclk);
-err_out_clk_dis_aper:
-	clk_disable_unprepare(xuartps_data->aperclk);
+	clk_disable_unprepare(cdns_uart_data->uartclk);
+err_out_clk_dis_pclk:
+	clk_disable_unprepare(cdns_uart_data->pclk);
 
 	return rc;
 }
 
 /**
- * xuartps_remove - called when the platform driver is unregistered
+ * cdns_uart_remove - called when the platform driver is unregistered
  * @pdev: Pointer to the platform device structure
  *
- * Returns 0 on success, negative error otherwise
- **/
-static int xuartps_remove(struct platform_device *pdev)
+ * Return: 0 on success, negative errno otherwise
+ */
+static int cdns_uart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
-	struct xuartps *xuartps_data = port->private_data;
+	struct cdns_uart *cdns_uart_data = port->private_data;
 	int rc;
 
-	/* Remove the xuartps port from the serial core */
+	/* Remove the cdns_uart port from the serial core */
 #ifdef CONFIG_COMMON_CLK
-	clk_notifier_unregister(xuartps_data->refclk,
-			&xuartps_data->clk_rate_change_nb);
+	clk_notifier_unregister(cdns_uart_data->uartclk,
+			&cdns_uart_data->clk_rate_change_nb);
 #endif
-	rc = uart_remove_one_port(&xuartps_uart_driver, port);
+	rc = uart_remove_one_port(&cdns_uart_uart_driver, port);
 	port->mapbase = 0;
-	clk_disable_unprepare(xuartps_data->refclk);
-	clk_disable_unprepare(xuartps_data->aperclk);
+	clk_disable_unprepare(cdns_uart_data->uartclk);
+	clk_disable_unprepare(cdns_uart_data->pclk);
 	return rc;
 }
 
 /* Match table for of_platform binding */
-static struct of_device_id xuartps_of_match[] = {
+static struct of_device_id cdns_uart_of_match[] = {
 	{ .compatible = "xlnx,xuartps", },
+	{ .compatible = "cdns,uart-r1p8", },
 	{}
 };
-MODULE_DEVICE_TABLE(of, xuartps_of_match);
+MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
 
-static struct platform_driver xuartps_platform_driver = {
-	.probe   = xuartps_probe,		/* Probe method */
-	.remove  = xuartps_remove,		/* Detach method */
+static struct platform_driver cdns_uart_platform_driver = {
+	.probe   = cdns_uart_probe,
+	.remove  = cdns_uart_remove,
 	.driver  = {
 		.owner = THIS_MODULE,
-		.name = XUARTPS_NAME,		/* Driver name */
-		.of_match_table = xuartps_of_match,
-		.pm = &xuartps_dev_pm_ops,
+		.name = CDNS_UART_NAME,
+		.of_match_table = cdns_uart_of_match,
+		.pm = &cdns_uart_dev_pm_ops,
 		},
 };
 
-/* ---------------------------------------------------------------------
- * Module Init and Exit
- */
-/**
- * xuartps_init - Initial driver registration call
- *
- * Returns whether the registration was successful or not
- **/
-static int __init xuartps_init(void)
+static int __init cdns_uart_init(void)
 {
 	int retval = 0;
 
-	/* Register the xuartps driver with the serial core */
-	retval = uart_register_driver(&xuartps_uart_driver);
+	/* Register the cdns_uart driver with the serial core */
+	retval = uart_register_driver(&cdns_uart_uart_driver);
 	if (retval)
 		return retval;
 
 	/* Register the platform driver */
-	retval = platform_driver_register(&xuartps_platform_driver);
+	retval = platform_driver_register(&cdns_uart_platform_driver);
 	if (retval)
-		uart_unregister_driver(&xuartps_uart_driver);
+		uart_unregister_driver(&cdns_uart_uart_driver);
 
 	return retval;
 }
 
-/**
- * xuartps_exit - Driver unregistration call
- **/
-static void __exit xuartps_exit(void)
+static void __exit cdns_uart_exit(void)
 {
-	/* The order of unregistration is important. Unregister the
-	 * UART driver before the platform driver crashes the system.
-	 */
-
 	/* Unregister the platform driver */
-	platform_driver_unregister(&xuartps_platform_driver);
+	platform_driver_unregister(&cdns_uart_platform_driver);
 
-	/* Unregister the xuartps driver */
-	uart_unregister_driver(&xuartps_uart_driver);
+	/* Unregister the cdns_uart driver */
+	uart_unregister_driver(&cdns_uart_uart_driver);
 }
 
-module_init(xuartps_init);
-module_exit(xuartps_exit);
+module_init(cdns_uart_init);
+module_exit(cdns_uart_exit);
 
-MODULE_DESCRIPTION("Driver for PS UART");
+MODULE_DESCRIPTION("Driver for Cadence UART");
 MODULE_AUTHOR("Xilinx Inc.");
 MODULE_LICENSE("GPL");