mmc: Add support for JMicron 388 SD/MMC controller

JMicron 388 SD/MMC combo controller supports the 1.8V low-voltage for
SD, but MMC doesn't work with the low-voltage, resulting in an error
at probing.

This patch adds the support for multiple voltage mask per device type,
so that SD works with 1.8V while MMC forces 3.3V.  Here new ocr_avail_*
fields for each device are introduced, so that the actual OCR mask is
switched dynamically.

Also, the restriction of low-voltage in core/sd.c is removed when the
bit is allowed explicitly via ocr_avail_sd mask.

This patch was rewritten from scratch based on Aries' original code.

Signed-off-by: Aries Lee <arieslee@jmicron.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

5 files changed, 67 insertions, 12 deletions

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 77f93c3b8808..76bb621e9aa9 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -745,6 +745,8 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr)
 	WARN_ON(!host->claimed);
 
 	mmc_attach_bus_ops(host);
+	if (host->ocr_avail_mmc)
+		host->ocr_avail = host->ocr_avail_mmc;
 
 	/*
 	 * We need to get OCR a different way for SPI.
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 49da4dffd28e..de062ebd8b26 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -772,6 +772,8 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr)
 	WARN_ON(!host->claimed);
 
 	mmc_sd_attach_bus_ops(host);
+	if (host->ocr_avail_sd)
+		host->ocr_avail = host->ocr_avail_sd;
 
 	/*
 	 * We need to get OCR a different way for SPI.
@@ -795,7 +797,8 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr)
 		ocr &= ~0x7F;
 	}
 
-	if (ocr & MMC_VDD_165_195) {
+	if ((ocr & MMC_VDD_165_195) &&
+	    !(host->ocr_avail_sd & MMC_VDD_165_195)) {
 		printk(KERN_WARNING "%s: SD card claims to support the "
 		       "incompletely defined 'low voltage range'. This "
 		       "will be ignored.\n", mmc_hostname(host));
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index efef5f94ac42..c18810ab6465 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -700,6 +700,8 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
 	WARN_ON(!host->claimed);
 
 	mmc_attach_bus(host, &mmc_sdio_ops);
+	if (host->ocr_avail_sdio)
+		host->ocr_avail = host->ocr_avail_sdio;
 
 	/*
 	 * Sanity check the voltages that the card claims to
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 831cf91b644a..d2638ffc4ed2 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -272,6 +272,7 @@ static int jmicron_pmos(struct sdhci_pci_chip *chip, int on)
 static int jmicron_probe(struct sdhci_pci_chip *chip)
 {
 	int ret;
+	u16 mmcdev = 0;
 
 	if (chip->pdev->revision == 0) {
 		chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR |
@@ -293,12 +294,17 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
 	 * 2. The MMC interface has a lower subfunction number
 	 *    than the SD interface.
 	 */
-	if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD) {
+	if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD)
+		mmcdev = PCI_DEVICE_ID_JMICRON_JMB38X_MMC;
+	else if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_SD)
+		mmcdev = PCI_DEVICE_ID_JMICRON_JMB388_ESD;
+
+	if (mmcdev) {
 		struct pci_dev *sd_dev;
 
 		sd_dev = NULL;
 		while ((sd_dev = pci_get_device(PCI_VENDOR_ID_JMICRON,
-			PCI_DEVICE_ID_JMICRON_JMB38X_MMC, sd_dev)) != NULL) {
+						mmcdev, sd_dev)) != NULL) {
 			if ((PCI_SLOT(chip->pdev->devfn) ==
 				PCI_SLOT(sd_dev->devfn)) &&
 				(chip->pdev->bus == sd_dev->bus))
@@ -358,11 +364,21 @@ static int jmicron_probe_slot(struct sdhci_pci_slot *slot)
 			slot->host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
 	}
 
+	/* JM388 MMC doesn't support 1.8V while SD supports it */
+	if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) {
+		slot->host->ocr_avail_sd = MMC_VDD_32_33 | MMC_VDD_33_34 |
+			MMC_VDD_29_30 | MMC_VDD_30_31 |
+			MMC_VDD_165_195; /* allow 1.8V */
+		slot->host->ocr_avail_mmc = MMC_VDD_32_33 | MMC_VDD_33_34 |
+			MMC_VDD_29_30 | MMC_VDD_30_31; /* no 1.8V for MMC */
+	}
+
 	/*
 	 * The secondary interface requires a bit set to get the
 	 * interrupts.
 	 */
-	if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC)
+	if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
+	    slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD)
 		jmicron_enable_mmc(slot->host, 1);
 
 	return 0;
@@ -373,7 +389,8 @@ static void jmicron_remove_slot(struct sdhci_pci_slot *slot, int dead)
 	if (dead)
 		return;
 
-	if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC)
+	if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
+	    slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD)
 		jmicron_enable_mmc(slot->host, 0);
 }
 
@@ -381,7 +398,8 @@ static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state)
 {
 	int i;
 
-	if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) {
+	if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
+	    chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) {
 		for (i = 0;i < chip->num_slots;i++)
 			jmicron_enable_mmc(chip->slots[i]->host, 0);
 	}
@@ -393,7 +411,8 @@ static int jmicron_resume(struct sdhci_pci_chip *chip)
 {
 	int ret, i;
 
-	if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) {
+	if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
+	    chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) {
 		for (i = 0;i < chip->num_slots;i++)
 			jmicron_enable_mmc(chip->slots[i]->host, 1);
 	}
@@ -582,6 +601,22 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 	},
 
 	{
+		.vendor		= PCI_VENDOR_ID_JMICRON,
+		.device		= PCI_DEVICE_ID_JMICRON_JMB388_SD,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_jmicron,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_JMICRON,
+		.device		= PCI_DEVICE_ID_JMICRON_JMB388_ESD,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_jmicron,
+	},
+
+	{
 		.vendor		= PCI_VENDOR_ID_SYSKONNECT,
 		.device		= 0x8000,
 		.subvendor	= PCI_ANY_ID,
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 8a74fcbfe13b..55698864c2cd 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1739,7 +1739,7 @@ EXPORT_SYMBOL_GPL(sdhci_alloc_host);
 int sdhci_add_host(struct sdhci_host *host)
 {
 	struct mmc_host *mmc;
-	unsigned int caps;
+	unsigned int caps, ocr_avail;
 	int ret;
 
 	WARN_ON(host == NULL);
@@ -1893,13 +1893,26 @@ int sdhci_add_host(struct sdhci_host *host)
 	    mmc_card_is_removable(mmc))
 		mmc->caps |= MMC_CAP_NEEDS_POLL;
 
-	mmc->ocr_avail = 0;
+	ocr_avail = 0;
 	if (caps & SDHCI_CAN_VDD_330)
-		mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
+		ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
 	if (caps & SDHCI_CAN_VDD_300)
-		mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31;
+		ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31;
 	if (caps & SDHCI_CAN_VDD_180)
-		mmc->ocr_avail |= MMC_VDD_165_195;
+		ocr_avail |= MMC_VDD_165_195;
+
+	mmc->ocr_avail = ocr_avail;
+	mmc->ocr_avail_sdio = ocr_avail;
+	if (host->ocr_avail_sdio)
+		mmc->ocr_avail_sdio &= host->ocr_avail_sdio;
+	mmc->ocr_avail_sd = ocr_avail;
+	if (host->ocr_avail_sd)
+		mmc->ocr_avail_sd &= host->ocr_avail_sd;
+	else /* normal SD controllers don't support 1.8V */
+		mmc->ocr_avail_sd &= ~MMC_VDD_165_195;
+	mmc->ocr_avail_mmc = ocr_avail;
+	if (host->ocr_avail_mmc)
+		mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
 
 	if (mmc->ocr_avail == 0) {
 		printk(KERN_ERR "%s: Hardware doesn't report any "