ath6kl: convert ar6004 hardware flags to firmware feature flags

The functionality defined through these flags were actually firmware features
which can change between firmware versions. To make it possible to support
different firmware versions with the same driver, convert the flags to firmware
feature flags.

For backwards compatibility support for old ar6004 firmware FW
API 3 or smaller images we forcefully set the feature bits in the driver.
Starting from FW API 5 the firmware image needs to set them.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

6 files changed, 42 insertions, 17 deletions

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 0e26f4a34fda..d139f2a7160a 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -2899,7 +2899,8 @@ static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev,
 	if (info->inactivity_timeout) {
 		inactivity_timeout = info->inactivity_timeout;
 
-		if (ar->hw.flags & ATH6KL_HW_AP_INACTIVITY_MINS)
+		if (test_bit(ATH6KL_FW_CAPABILITY_AP_INACTIVITY_MINS,
+			     ar->fw_capabilities))
 			inactivity_timeout = DIV_ROUND_UP(inactivity_timeout,
 							  60);
 
@@ -3782,7 +3783,8 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 		ath6kl_band_5ghz.ht_cap.ht_supported = false;
 	}
 
-	if (ar->hw.flags & ATH6KL_HW_64BIT_RATES) {
+	if (test_bit(ATH6KL_FW_CAPABILITY_64BIT_RATES,
+		     ar->fw_capabilities)) {
 		ath6kl_band_2ghz.ht_cap.mcs.rx_mask[0] = 0xff;
 		ath6kl_band_5ghz.ht_cap.mcs.rx_mask[0] = 0xff;
 		ath6kl_band_2ghz.ht_cap.mcs.rx_mask[1] = 0xff;
diff --git a/drivers/net/wireless/ath/ath6kl/core.c b/drivers/net/wireless/ath/ath6kl/core.c
index b0b652042760..0df74b245af4 100644
--- a/drivers/net/wireless/ath/ath6kl/core.c
+++ b/drivers/net/wireless/ath/ath6kl/core.c
@@ -123,6 +123,22 @@ int ath6kl_core_init(struct ath6kl *ar, enum ath6kl_htc_type htc_type)
 
 	/* FIXME: we should free all firmwares in the error cases below */
 
+	/*
+	 * Backwards compatibility support for older ar6004 firmware images
+	 * which do not set these feature flags.
+	 */
+	if (ar->target_type == TARGET_TYPE_AR6004 &&
+	    ar->fw_api <= 4) {
+		__set_bit(ATH6KL_FW_CAPABILITY_64BIT_RATES,
+			  ar->fw_capabilities);
+		__set_bit(ATH6KL_FW_CAPABILITY_AP_INACTIVITY_MINS,
+			  ar->fw_capabilities);
+
+		if (ar->hw.id == AR6004_HW_1_3_VERSION)
+			__set_bit(ATH6KL_FW_CAPABILITY_MAP_LP_ENDPOINT,
+				  ar->fw_capabilities);
+	}
+
 	/* Indicate that WMI is enabled (although not ready yet) */
 	set_bit(WMI_ENABLED, &ar->flag);
 	ar->wmi = ath6kl_wmi_init(ar);
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 26b0f92424e1..bd91c4465580 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -136,6 +136,15 @@ enum ath6kl_fw_capability {
 	 */
 	ATH6KL_FW_CAPABILITY_HEART_BEAT_POLL,
 
+	/* WMI_SET_TX_SELECT_RATES_CMDID uses 64 bit size rate table */
+	ATH6KL_FW_CAPABILITY_64BIT_RATES,
+
+	/* WMI_AP_CONN_INACT_CMDID uses minutes as units */
+	ATH6KL_FW_CAPABILITY_AP_INACTIVITY_MINS,
+
+	/* use low priority endpoint for all data */
+	ATH6KL_FW_CAPABILITY_MAP_LP_ENDPOINT,
+
 	/* this needs to be last */
 	ATH6KL_FW_CAPABILITY_MAX,
 };
@@ -149,9 +158,6 @@ struct ath6kl_fw_ie {
 };
 
 enum ath6kl_hw_flags {
-	ATH6KL_HW_64BIT_RATES		= BIT(0),
-	ATH6KL_HW_AP_INACTIVITY_MINS	= BIT(1),
-	ATH6KL_HW_MAP_LP_ENDPOINT	= BIT(2),
 	ATH6KL_HW_SDIO_CRC_ERROR_WAR	= BIT(3),
 };
 
diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index 6e1e6995a634..ed086ead2601 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -93,8 +93,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.board_addr			= 0x433900,
 		.refclk_hz			= 26000000,
 		.uarttx_pin			= 11,
-		.flags				= ATH6KL_HW_64BIT_RATES |
-						  ATH6KL_HW_AP_INACTIVITY_MINS,
+		.flags				= 0,
 
 		.fw = {
 			.dir		= AR6004_HW_1_0_FW_DIR,
@@ -114,8 +113,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.board_addr			= 0x43d400,
 		.refclk_hz			= 40000000,
 		.uarttx_pin			= 11,
-		.flags				= ATH6KL_HW_64BIT_RATES |
-						  ATH6KL_HW_AP_INACTIVITY_MINS,
+		.flags				= 0,
 		.fw = {
 			.dir		= AR6004_HW_1_1_FW_DIR,
 			.fw		= AR6004_HW_1_1_FIRMWARE_FILE,
@@ -134,8 +132,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.board_addr			= 0x435c00,
 		.refclk_hz			= 40000000,
 		.uarttx_pin			= 11,
-		.flags				= ATH6KL_HW_64BIT_RATES |
-						  ATH6KL_HW_AP_INACTIVITY_MINS,
+		.flags				= 0,
 
 		.fw = {
 			.dir		= AR6004_HW_1_2_FW_DIR,
@@ -154,9 +151,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.board_addr			= 0x436400,
 		.refclk_hz                      = 40000000,
 		.uarttx_pin                     = 11,
-		.flags				= ATH6KL_HW_64BIT_RATES |
-						  ATH6KL_HW_AP_INACTIVITY_MINS |
-						  ATH6KL_HW_MAP_LP_ENDPOINT,
+		.flags				= 0,
 
 		.fw = {
 			.dir            = AR6004_HW_1_3_FW_DIR,
@@ -1575,6 +1570,9 @@ static const struct fw_capa_str_map {
 	{ ATH6KL_FW_CAPABILITY_REGDOMAIN, "regdomain" },
 	{ ATH6KL_FW_CAPABILITY_SCHED_SCAN_V2, "sched-scan-v2" },
 	{ ATH6KL_FW_CAPABILITY_HEART_BEAT_POLL, "hb-poll" },
+	{ ATH6KL_FW_CAPABILITY_64BIT_RATES, "64bit-rates" },
+	{ ATH6KL_FW_CAPABILITY_AP_INACTIVITY_MINS, "ap-inactivity-mins" },
+	{ ATH6KL_FW_CAPABILITY_MAP_LP_ENDPOINT, "map-lp-endpoint" },
 };
 
 static const char *ath6kl_init_get_fw_capa_name(unsigned int id)
diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c
index 3afc5a463d06..e5a9e7fe2cea 100644
--- a/drivers/net/wireless/ath/ath6kl/usb.c
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -802,7 +802,8 @@ static int ath6kl_usb_map_service_pipe(struct ath6kl *ar, u16 svc_id,
 		break;
 	case WMI_DATA_VI_SVC:
 
-		if (ar->hw.flags & ATH6KL_HW_MAP_LP_ENDPOINT)
+		if (test_bit(ATH6KL_FW_CAPABILITY_MAP_LP_ENDPOINT,
+			     ar->fw_capabilities))
 			*ul_pipe = ATH6KL_USB_PIPE_TX_DATA_LP;
 		else
 			*ul_pipe = ATH6KL_USB_PIPE_TX_DATA_MP;
@@ -814,7 +815,8 @@ static int ath6kl_usb_map_service_pipe(struct ath6kl *ar, u16 svc_id,
 		break;
 	case WMI_DATA_VO_SVC:
 
-		if (ar->hw.flags & ATH6KL_HW_MAP_LP_ENDPOINT)
+		if (test_bit(ATH6KL_FW_CAPABILITY_MAP_LP_ENDPOINT,
+			     ar->fw_capabilities))
 			*ul_pipe = ATH6KL_USB_PIPE_TX_DATA_LP;
 		else
 			*ul_pipe = ATH6KL_USB_PIPE_TX_DATA_MP;
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 4d7f9e4712e9..6ecc0a419c1a 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -2838,7 +2838,8 @@ int ath6kl_wmi_set_bitrate_mask(struct wmi *wmi, u8 if_idx,
 {
 	struct ath6kl *ar = wmi->parent_dev;
 
-	if (ar->hw.flags & ATH6KL_HW_64BIT_RATES)
+	if (test_bit(ATH6KL_FW_CAPABILITY_64BIT_RATES,
+		     ar->fw_capabilities))
 		return ath6kl_set_bitrate_mask64(wmi, if_idx, mask);
 	else
 		return ath6kl_set_bitrate_mask32(wmi, if_idx, mask);