diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-05-07 19:09:55 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-05-07 19:09:55 +0200 |
commit | 23063b378de734383c9f42de770b01cd661cd9b4 (patch) | |
tree | e02c091743d8880e2bc8f37044b280a61714065d /drivers | |
parent | Merge tag 'musb-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ba... (diff) | |
parent | usb: dwc3: define DWC3_EP0_BOUNCE_SIZE (diff) | |
download | linux-23063b378de734383c9f42de770b01cd661cd9b4.tar.xz linux-23063b378de734383c9f42de770b01cd661cd9b4.zip |
Merge tag 'dwc3-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
usb: dwc3: patches for v3.5 merge window
This pull request contains one workaround for a Silicon
Issue found on all RTL releases prior to 2.20a, which
would cause a metastability state on Run/Stop bit.
We also have some patches implementing a few extra Standard
requests introduced by USB3 spec (Set SEL and Set Isoch Delay),
as well as one patch, which has been pending for a long time,
implementing LPM support.
Last, but not least, we are splitting the host address space
out of the dwc3 core driver otherwise xHCI won't be able to
request_mem_region() its own address space. This patch is
only needed because we are (as we should) re-using the xHCI
driver, which is a completely separate module.
Together with these three big changes, come a few extra preparatory
patches which most move code around, define macros and so on, as
well as a fix for Isochronous transfers which hasn't been triggered
before.
[ resolved conflicts and build error in drivers/usb/dwc3/gadget.c - gregkh]
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/dwc3/core.c | 31 | ||||
-rw-r--r-- | drivers/usb/dwc3/core.h | 39 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-omap.c | 32 | ||||
-rw-r--r-- | drivers/usb/dwc3/ep0.c | 155 | ||||
-rw-r--r-- | drivers/usb/dwc3/gadget.c | 114 | ||||
-rw-r--r-- | drivers/usb/dwc3/gadget.h | 1 | ||||
-rw-r--r-- | drivers/usb/dwc3/host.c | 19 | ||||
-rw-r--r-- | drivers/usb/dwc3/io.h | 16 |
8 files changed, 323 insertions, 84 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 99b58d84553a..1040bdb8dc88 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -410,7 +410,6 @@ static int __devinit dwc3_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; int ret = -ENOMEM; - int irq; void __iomem *regs; void *mem; @@ -425,15 +424,28 @@ static int __devinit dwc3_probe(struct platform_device *pdev) dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); dwc->mem = mem; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res) { - dev_err(dev, "missing resource\n"); + dev_err(dev, "missing IRQ\n"); return -ENODEV; } + dwc->xhci_resources[1] = *res; - dwc->res = res; - - res = devm_request_mem_region(dev, res->start, resource_size(res), + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "missing memory resource\n"); + return -ENODEV; + } + dwc->xhci_resources[0] = *res; + dwc->xhci_resources[0].end = dwc->xhci_resources[0].start + + DWC3_XHCI_REGS_END; + + /* + * Request memory region but exclude xHCI regs, + * since it will be requested by the xhci-plat driver. + */ + res = devm_request_mem_region(dev, res->start + DWC3_GLOBALS_REGS_START, + resource_size(res) - DWC3_GLOBALS_REGS_START, dev_name(dev)); if (!res) { dev_err(dev, "can't request mem region\n"); @@ -446,19 +458,12 @@ static int __devinit dwc3_probe(struct platform_device *pdev) return -ENOMEM; } - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(dev, "missing IRQ\n"); - return -ENODEV; - } - spin_lock_init(&dwc->lock); platform_set_drvdata(pdev, dwc); dwc->regs = regs; dwc->regs_size = resource_size(res); dwc->dev = dev; - dwc->irq = irq; if (!strncmp("super", maximum_speed, 5)) dwc->maximum_speed = DWC3_DCFG_SUPERSPEED; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 9c5c73aae4f4..f69c877add09 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -51,7 +51,9 @@ #include <linux/usb/gadget.h> /* Global constants */ +#define DWC3_EP0_BOUNCE_SIZE 512 #define DWC3_ENDPOINTS_NUM 32 +#define DWC3_XHCI_RESOURCES_NUM 2 #define DWC3_EVENT_BUFFERS_SIZE PAGE_SIZE #define DWC3_EVENT_TYPE_MASK 0xfe @@ -75,6 +77,16 @@ #define DWC3_GSNPSID_MASK 0xffff0000 #define DWC3_GSNPSREV_MASK 0xffff +/* DWC3 registers memory space boundries */ +#define DWC3_XHCI_REGS_START 0x0 +#define DWC3_XHCI_REGS_END 0x7fff +#define DWC3_GLOBALS_REGS_START 0xc100 +#define DWC3_GLOBALS_REGS_END 0xc6ff +#define DWC3_DEVICE_REGS_START 0xc700 +#define DWC3_DEVICE_REGS_END 0xcbff +#define DWC3_OTG_REGS_START 0xcc00 +#define DWC3_OTG_REGS_END 0xccff + /* Global Registers */ #define DWC3_GSBUSCFG0 0xc100 #define DWC3_GSBUSCFG1 0xc104 @@ -183,6 +195,7 @@ #define DWC3_GHWPARAMS1_EN_PWROPT_CLK 1 /* Device Configuration Register */ +#define DWC3_DCFG_LPM_CAP (1 << 22) #define DWC3_DCFG_DEVADDR(addr) ((addr) << 3) #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f) @@ -272,12 +285,14 @@ #define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10 +#define DWC3_DGCMD_STATUS(n) (((n) >> 15) & 1) +#define DWC3_DGCMD_CMDACT (1 << 10) + /* Device Endpoint Command Register */ #define DWC3_DEPCMD_PARAM_SHIFT 16 #define DWC3_DEPCMD_PARAM(x) ((x) << DWC3_DEPCMD_PARAM_SHIFT) #define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f) -#define DWC3_DEPCMD_STATUS_MASK (0x0f << 12) -#define DWC3_DEPCMD_STATUS(x) (((x) & DWC3_DEPCMD_STATUS_MASK) >> 12) +#define DWC3_DEPCMD_STATUS(x) (((x) >> 15) & 1) #define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11) #define DWC3_DEPCMD_CMDACT (1 << 10) #define DWC3_DEPCMD_CMDIOC (1 << 8) @@ -560,6 +575,11 @@ struct dwc3_request { * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @needs_fifo_resize: not all users might want fifo resizing, flag it * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes. + * @isoch_delay: wValue from Set Isochronous Delay request; + * @u2sel: parameter from Set SEL request. + * @u2pel: parameter from Set SEL request. + * @u1sel: parameter from Set SEL request. + * @u1pel: parameter from Set SEL request. * @ep0_next_event: hold the next expected event * @ep0state: state of endpoint zero * @link_state: link state @@ -582,7 +602,7 @@ struct dwc3 { struct device *dev; struct platform_device *xhci; - struct resource *res; + struct resource xhci_resources[DWC3_XHCI_RESOURCES_NUM]; struct dwc3_event_buffer **ev_buffs; struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM]; @@ -593,8 +613,6 @@ struct dwc3 { void __iomem *regs; size_t regs_size; - int irq; - u32 num_event_buffers; u32 u1u2; u32 maximum_speed; @@ -608,6 +626,10 @@ struct dwc3 { #define DWC3_REVISION_185A 0x5533185a #define DWC3_REVISION_188A 0x5533188a #define DWC3_REVISION_190A 0x5533190a +#define DWC3_REVISION_200A 0x5533200a +#define DWC3_REVISION_202A 0x5533202a +#define DWC3_REVISION_210A 0x5533210a +#define DWC3_REVISION_220A 0x5533220a unsigned is_selfpowered:1; unsigned three_stage_setup:1; @@ -624,7 +646,14 @@ struct dwc3 { enum dwc3_link_state link_state; enum dwc3_device_state dev_state; + u16 isoch_delay; + u16 u2sel; + u16 u2pel; + u8 u1sel; + u8 u1pel; + u8 speed; + void *mem; struct dwc3_hwparams hwparams; diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index d7d9c0ec9515..479dc047da3a 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -49,7 +49,6 @@ #include <linux/of.h> #include "core.h" -#include "io.h" /* * All these registers belong to OMAP's Wrapper around the @@ -143,6 +142,17 @@ struct dwc3_omap { u32 dma_status:1; }; +static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset) +{ + return readl(base + offset); +} + +static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value) +{ + writel(value, base + offset); +} + + static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) { struct dwc3_omap *omap = _omap; @@ -150,7 +160,7 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) spin_lock(&omap->lock); - reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_1); + reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_1); if (reg & USBOTGSS_IRQ1_DMADISABLECLR) { dev_dbg(omap->dev, "DMA Disable was Cleared\n"); @@ -184,10 +194,10 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL) dev_dbg(omap->dev, "IDPULLUP Fall\n"); - dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg); + dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg); - reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_0); - dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg); + reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0); + dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg); spin_unlock(&omap->lock); @@ -270,7 +280,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) omap->base = base; omap->dwc3 = dwc3; - reg = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); + reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); utmi_mode = of_get_property(node, "utmi-mode", &size); if (utmi_mode && size == sizeof(*utmi_mode)) { @@ -293,10 +303,10 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) } } - dwc3_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg); + dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg); /* check the DMA Status */ - reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG); + reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE); /* Set No-Idle and No-Standby */ @@ -306,7 +316,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) reg |= (USBOTGSS_SYSCONFIG_STANDBYMODE(USBOTGSS_STANDBYMODE_NO_STANDBY) | USBOTGSS_SYSCONFIG_IDLEMODE(USBOTGSS_IDLEMODE_NO_IDLE)); - dwc3_writel(omap->base, USBOTGSS_SYSCONFIG, reg); + dwc3_omap_writel(omap->base, USBOTGSS_SYSCONFIG, reg); ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0, "dwc3-omap", omap); @@ -318,7 +328,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) /* enable all IRQs */ reg = USBOTGSS_IRQO_COREIRQ_ST; - dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg); + dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg); reg = (USBOTGSS_IRQ1_OEVT | USBOTGSS_IRQ1_DRVVBUS_RISE | @@ -330,7 +340,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev) USBOTGSS_IRQ1_DISCHRGVBUS_FALL | USBOTGSS_IRQ1_IDPULLUP_FALL); - dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg); + dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg); ret = platform_device_add_resources(dwc3, pdev->resource, pdev->num_resources); diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 3453ca1f7479..9e8a3dce69fd 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -261,6 +261,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc, { struct dwc3_ep *dep; u32 recip; + u32 reg; u16 usb_status = 0; __le16 *response_pkt; @@ -268,10 +269,18 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc, switch (recip) { case USB_RECIP_DEVICE: /* - * We are self-powered. U1/U2/LTM will be set later - * once we handle this states. RemoteWakeup is 0 on SS + * LTM will be set once we know how to set this in HW. */ usb_status |= dwc->is_selfpowered << USB_DEVICE_SELF_POWERED; + + if (dwc->speed == DWC3_DSTS_SUPERSPEED) { + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (reg & DWC3_DCTL_INITU1ENA) + usb_status |= 1 << USB_DEV_STAT_U1_ENABLED; + if (reg & DWC3_DCTL_INITU2ENA) + usb_status |= 1 << USB_DEV_STAT_U2_ENABLED; + } + break; case USB_RECIP_INTERFACE: @@ -312,6 +321,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, u32 recip; u32 wValue; u32 wIndex; + u32 reg; int ret; wValue = le16_to_cpu(ctrl->wValue); @@ -320,29 +330,43 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, switch (recip) { case USB_RECIP_DEVICE: + switch (wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + break; /* * 9.4.1 says only only for SS, in AddressState only for * default control pipe */ - switch (wValue) { case USB_DEVICE_U1_ENABLE: - case USB_DEVICE_U2_ENABLE: - case USB_DEVICE_LTM_ENABLE: if (dwc->dev_state != DWC3_CONFIGURED_STATE) return -EINVAL; if (dwc->speed != DWC3_DSTS_SUPERSPEED) return -EINVAL; - } - /* XXX add U[12] & LTM */ - switch (wValue) { - case USB_DEVICE_REMOTE_WAKEUP: - break; - case USB_DEVICE_U1_ENABLE: + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (set) + reg |= DWC3_DCTL_INITU1ENA; + else + reg &= ~DWC3_DCTL_INITU1ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); break; + case USB_DEVICE_U2_ENABLE: + if (dwc->dev_state != DWC3_CONFIGURED_STATE) + return -EINVAL; + if (dwc->speed != DWC3_DSTS_SUPERSPEED) + return -EINVAL; + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (set) + reg |= DWC3_DCTL_INITU2ENA; + else + reg &= ~DWC3_DCTL_INITU2ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); break; + case USB_DEVICE_LTM_ENABLE: + return -EINVAL; break; case USB_DEVICE_TEST_MODE: @@ -469,6 +493,107 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) return ret; } +static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req) +{ + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + u32 param = 0; + u32 reg; + + struct timing { + u8 u1sel; + u8 u1pel; + u16 u2sel; + u16 u2pel; + } __packed timing; + + int ret; + + memcpy(&timing, req->buf, sizeof(timing)); + + dwc->u1sel = timing.u1sel; + dwc->u1pel = timing.u1pel; + dwc->u2sel = timing.u2sel; + dwc->u2pel = timing.u2pel; + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (reg & DWC3_DCTL_INITU2ENA) + param = dwc->u2pel; + if (reg & DWC3_DCTL_INITU1ENA) + param = dwc->u1pel; + + /* + * According to Synopsys Databook, if parameter is + * greater than 125, a value of zero should be + * programmed in the register. + */ + if (param > 125) + param = 0; + + /* now that we have the time, issue DGCMD Set Sel */ + ret = dwc3_send_gadget_generic_command(dwc, + DWC3_DGCMD_SET_PERIODIC_PAR, param); + WARN_ON(ret < 0); +} + +static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + struct dwc3_ep *dep; + u16 wLength; + u16 wValue; + + if (dwc->dev_state == DWC3_DEFAULT_STATE) + return -EINVAL; + + wValue = le16_to_cpu(ctrl->wValue); + wLength = le16_to_cpu(ctrl->wLength); + + if (wLength != 6) { + dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n", + wLength); + return -EINVAL; + } + + /* + * To handle Set SEL we need to receive 6 bytes from Host. So let's + * queue a usb_request for 6 bytes. + * + * Remember, though, this controller can't handle non-wMaxPacketSize + * aligned transfers on the OUT direction, so we queue a request for + * wMaxPacketSize instead. + */ + dep = dwc->eps[0]; + dwc->ep0_usb_req.dep = dep; + dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket; + dwc->ep0_usb_req.request.buf = dwc->setup_buf; + dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl; + + return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req); +} + +static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + u16 wLength; + u16 wValue; + u16 wIndex; + + wValue = le16_to_cpu(ctrl->wValue); + wLength = le16_to_cpu(ctrl->wLength); + wIndex = le16_to_cpu(ctrl->wIndex); + + if (wIndex || wLength) + return -EINVAL; + + /* + * REVISIT It's unclear from Databook what to do with this + * value. For now, just cache it. + */ + dwc->isoch_delay = wValue; + + return 0; +} + static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) { int ret; @@ -494,6 +619,14 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n"); ret = dwc3_ep0_set_config(dwc, ctrl); break; + case USB_REQ_SET_SEL: + dev_vdbg(dwc->dev, "USB_REQ_SET_SEL\n"); + ret = dwc3_ep0_set_sel(dwc, ctrl); + break; + case USB_REQ_SET_ISOCH_DELAY: + dev_vdbg(dwc->dev, "USB_REQ_SET_ISOCH_DELAY\n"); + ret = dwc3_ep0_set_isoch_delay(dwc, ctrl); + break; default: dev_vdbg(dwc->dev, "Forwarding to gadget driver\n"); ret = dwc3_ep0_delegate_req(dwc, ctrl); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 561625a1284d..3df1a1973b05 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -276,6 +276,33 @@ static const char *dwc3_gadget_ep_cmd_string(u8 cmd) } } +int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param) +{ + u32 timeout = 500; + u32 reg; + + dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param); + dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT); + + do { + reg = dwc3_readl(dwc->regs, DWC3_DGCMD); + if (!(reg & DWC3_DGCMD_CMDACT)) { + dev_vdbg(dwc->dev, "Command Complete --> %d\n", + DWC3_DGCMD_STATUS(reg)); + return 0; + } + + /* + * We can't sleep here, because it's also called from + * interrupt context. + */ + timeout--; + if (!timeout) + return -ETIMEDOUT; + udelay(1); + } while (1); +} + int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, unsigned cmd, struct dwc3_gadget_ep_cmd_params *params) { @@ -929,10 +956,12 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param, } dep->flags |= DWC3_EP_BUSY; - dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc, - dep->number); - WARN_ON_ONCE(!dep->res_trans_idx); + if (start_new) { + dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc, + dep->number); + WARN_ON_ONCE(!dep->res_trans_idx); + } return 0; } @@ -966,28 +995,37 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) list_add_tail(&req->list, &dep->request_list); + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && (dep->flags & DWC3_EP_BUSY)) + dep->flags |= DWC3_EP_PENDING_REQUEST; + /* - * There is one special case: XferNotReady with - * empty list of requests. We need to kick the - * transfer here in that situation, otherwise - * we will be NAKing forever. + * There are two special cases: + * + * 1. XferNotReady with empty list of requests. We need to kick the + * transfer here in that situation, otherwise we will be NAKing + * forever. If we get XferNotReady before gadget driver has a + * chance to queue a request, we will ACK the IRQ but won't be + * able to receive the data until the next request is queued. + * The following code is handling exactly that. * - * If we get XferNotReady before gadget driver - * has a chance to queue a request, we will ACK - * the IRQ but won't be able to receive the data - * until the next request is queued. The following - * code is handling exactly that. + * 2. XferInProgress on Isoc EP with an active transfer. We need to + * kick the transfer here after queuing a request, otherwise the + * core may not see the modified TRB(s). */ if (dep->flags & DWC3_EP_PENDING_REQUEST) { - int ret; - int start_trans; + int ret; + int start_trans = 1; + u8 trans_idx = dep->res_trans_idx; - start_trans = 1; if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && - (dep->flags & DWC3_EP_BUSY)) + (dep->flags & DWC3_EP_BUSY)) { start_trans = 0; + WARN_ON_ONCE(!trans_idx); + } else { + trans_idx = 0; + } - ret = __dwc3_gadget_kick_transfer(dep, 0, start_trans); + ret = __dwc3_gadget_kick_transfer(dep, trans_idx, start_trans); if (ret && ret != -EBUSY) { struct dwc3 *dwc = dep->dwc; @@ -1355,7 +1393,24 @@ static int dwc3_gadget_start(struct usb_gadget *g, reg = dwc3_readl(dwc->regs, DWC3_DCFG); reg &= ~(DWC3_DCFG_SPEED_MASK); - reg |= dwc->maximum_speed; + + /** + * WORKAROUND: DWC3 revision < 2.20a have an issue + * which would cause metastability state on Run/Stop + * bit if we try to force the IP to USB2-only mode. + * + * Because of that, we cannot configure the IP to any + * speed other than the SuperSpeed + * + * Refers to: + * + * STAR#9000525659: Clock Domain Crossing on DCTL in + * USB 2.0 Mode + */ + if (dwc->revision < DWC3_REVISION_220A) + reg |= DWC3_DCFG_SUPERSPEED; + else + reg |= dwc->maximum_speed; dwc3_writel(dwc->regs, DWC3_DCFG, reg); dwc->start_config_issued = false; @@ -1915,6 +1970,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_TSTCTRL_MASK; + reg &= ~(DWC3_DCTL_INITU1ENA | DWC3_DCTL_INITU2ENA); dwc3_writel(dwc->regs, DWC3_DCTL, reg); dwc->test_mode = false; @@ -2262,8 +2318,7 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc) goto err1; } - dwc->setup_buf = kzalloc(sizeof(*dwc->setup_buf) * 2, - GFP_KERNEL); + dwc->setup_buf = kzalloc(DWC3_EP0_BOUNCE_SIZE, GFP_KERNEL); if (!dwc->setup_buf) { dev_err(dwc->dev, "failed to allocate setup buffer\n"); ret = -ENOMEM; @@ -2271,7 +2326,8 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc) } dwc->ep0_bounce = dma_alloc_coherent(dwc->dev, - 512, &dwc->ep0_bounce_addr, GFP_KERNEL); + DWC3_EP0_BOUNCE_SIZE, &dwc->ep0_bounce_addr, + GFP_KERNEL); if (!dwc->ep0_bounce) { dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n"); ret = -ENOMEM; @@ -2312,6 +2368,14 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc) goto err5; } + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg |= DWC3_DCFG_LPM_CAP; + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg |= DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + /* Enable all but Start and End of Frame IRQs */ reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN | DWC3_DEVTEN_EVNTOVERFLOWEN | @@ -2350,8 +2414,8 @@ err5: dwc3_gadget_free_endpoints(dwc); err4: - dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce, - dwc->ep0_bounce_addr); + dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE, + dwc->ep0_bounce, dwc->ep0_bounce_addr); err3: kfree(dwc->setup_buf); @@ -2380,8 +2444,8 @@ void dwc3_gadget_exit(struct dwc3 *dwc) dwc3_gadget_free_endpoints(dwc); - dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce, - dwc->ep0_bounce_addr); + dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE, + dwc->ep0_bounce, dwc->ep0_bounce_addr); kfree(dwc->setup_buf); diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index a8600084348c..95ef6a2f7764 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -111,6 +111,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value); int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, unsigned cmd, struct dwc3_gadget_ep_cmd_params *params); +int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param); /** * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index b108d18fd40d..56a62342884d 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -39,15 +39,6 @@ #include "core.h" -static struct resource generic_resources[] = { - { - .flags = IORESOURCE_IRQ, - }, - { - .flags = IORESOURCE_MEM, - }, -}; - int dwc3_host_init(struct dwc3 *dwc) { struct platform_device *xhci; @@ -68,14 +59,8 @@ int dwc3_host_init(struct dwc3 *dwc) dwc->xhci = xhci; - /* setup resources */ - generic_resources[0].start = dwc->irq; - - generic_resources[1].start = dwc->res->start; - generic_resources[1].end = dwc->res->start + 0x7fff; - - ret = platform_device_add_resources(xhci, generic_resources, - ARRAY_SIZE(generic_resources)); + ret = platform_device_add_resources(xhci, dwc->xhci_resources, + DWC3_XHCI_RESOURCES_NUM); if (ret) { dev_err(dwc->dev, "couldn't add resources to xHCI device\n"); goto err1; diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h index 071d561f3e68..a50f76b9d19b 100644 --- a/drivers/usb/dwc3/io.h +++ b/drivers/usb/dwc3/io.h @@ -41,14 +41,26 @@ #include <linux/io.h> +#include "core.h" + static inline u32 dwc3_readl(void __iomem *base, u32 offset) { - return readl(base + offset); + /* + * We requested the mem region starting from the Globals address + * space, see dwc3_probe in core.c. + * However, the offsets are given starting from xHCI address space. + */ + return readl(base + (offset - DWC3_GLOBALS_REGS_START)); } static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value) { - writel(value, base + offset); + /* + * We requested the mem region starting from the Globals address + * space, see dwc3_probe in core.c. + * However, the offsets are given starting from xHCI address space. + */ + writel(value, base + (offset - DWC3_GLOBALS_REGS_START)); } #endif /* __DRIVERS_USB_DWC3_IO_H */ |