summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorBart Van Assche <bvanassche@acm.org>2022-05-11 23:25:52 +0200
committerMartin K. Petersen <martin.petersen@oracle.com>2022-05-20 02:27:37 +0200
commitdd11376b9f1b73aca3f8c6eb541486bbb6996f05 (patch)
tree2837cc2e56ad980cb69ee2a6d362920e631814ca /drivers
parentscsi: qla1280: Remove redundant variable (diff)
downloadlinux-dd11376b9f1b73aca3f8c6eb541486bbb6996f05.tar.xz
linux-dd11376b9f1b73aca3f8c6eb541486bbb6996f05.zip
scsi: ufs: Split the drivers/scsi/ufs directory
Split the drivers/scsi/ufs directory into 'core' and 'host' directories under the drivers/ufs/ directory. Move shared header files into the include/ufs/ directory. This separation makes it clear which header files UFS drivers are allowed to include (include/ufs/*.h) and which header files UFS drivers are not allowed to include (drivers/ufs/core/*.h). Update the MAINTAINERS file. Add myself as a UFS reviewer. Link: https://lore.kernel.org/r/20220511212552.655341-1-bvanassche@acm.org Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bean Huo <beanhuo@micron.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Keoseong Park <keosung.park@samsung.com> Tested-by: Bean Huo <beanhuo@micron.com> Tested-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Acked-by: Avri Altman <avri.altman@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/Kconfig2
-rw-r--r--drivers/Makefile1
-rw-r--r--drivers/scsi/Kconfig1
-rw-r--r--drivers/scsi/Makefile1
-rw-r--r--drivers/scsi/ufs/ufs.h623
-rw-r--r--drivers/scsi/ufs/ufs_quirks.h116
-rw-r--r--drivers/scsi/ufs/ufshcd.h1230
-rw-r--r--drivers/scsi/ufs/ufshci.h510
-rw-r--r--drivers/scsi/ufs/unipro.h316
-rw-r--r--drivers/ufs/Kconfig30
-rw-r--r--drivers/ufs/Makefile5
-rw-r--r--drivers/ufs/core/Kconfig60
-rw-r--r--drivers/ufs/core/Makefile10
-rw-r--r--drivers/ufs/core/ufs-debugfs.c (renamed from drivers/scsi/ufs/ufs-debugfs.c)2
-rw-r--r--drivers/ufs/core/ufs-debugfs.h (renamed from drivers/scsi/ufs/ufs-debugfs.h)0
-rw-r--r--drivers/ufs/core/ufs-fault-injection.c (renamed from drivers/scsi/ufs/ufs-fault-injection.c)0
-rw-r--r--drivers/ufs/core/ufs-fault-injection.h (renamed from drivers/scsi/ufs/ufs-fault-injection.h)0
-rw-r--r--drivers/ufs/core/ufs-hwmon.c (renamed from drivers/scsi/ufs/ufs-hwmon.c)2
-rw-r--r--drivers/ufs/core/ufs-sysfs.c (renamed from drivers/scsi/ufs/ufs-sysfs.c)2
-rw-r--r--drivers/ufs/core/ufs-sysfs.h (renamed from drivers/scsi/ufs/ufs-sysfs.h)0
-rw-r--r--drivers/ufs/core/ufs_bsg.c (renamed from drivers/scsi/ufs/ufs_bsg.c)2
-rw-r--r--drivers/ufs/core/ufs_bsg.h (renamed from drivers/scsi/ufs/ufs_bsg.h)0
-rw-r--r--drivers/ufs/core/ufshcd-crypto.c (renamed from drivers/scsi/ufs/ufshcd-crypto.c)2
-rw-r--r--drivers/ufs/core/ufshcd-crypto.h (renamed from drivers/scsi/ufs/ufshcd-crypto.h)4
-rw-r--r--drivers/ufs/core/ufshcd-priv.h (renamed from drivers/scsi/ufs/ufshcd-priv.h)2
-rw-r--r--drivers/ufs/core/ufshcd.c (renamed from drivers/scsi/ufs/ufshcd.c)4
-rw-r--r--drivers/ufs/core/ufshpb.c (renamed from drivers/scsi/ufs/ufshpb.c)2
-rw-r--r--drivers/ufs/core/ufshpb.h (renamed from drivers/scsi/ufs/ufshpb.h)0
-rw-r--r--drivers/ufs/host/Kconfig (renamed from drivers/scsi/ufs/Kconfig)75
-rw-r--r--drivers/ufs/host/Makefile (renamed from drivers/scsi/ufs/Makefile)12
-rw-r--r--drivers/ufs/host/cdns-pltfrm.c (renamed from drivers/scsi/ufs/cdns-pltfrm.c)0
-rw-r--r--drivers/ufs/host/tc-dwc-g210-pci.c (renamed from drivers/scsi/ufs/tc-dwc-g210-pci.c)2
-rw-r--r--drivers/ufs/host/tc-dwc-g210-pltfrm.c (renamed from drivers/scsi/ufs/tc-dwc-g210-pltfrm.c)0
-rw-r--r--drivers/ufs/host/tc-dwc-g210.c (renamed from drivers/scsi/ufs/tc-dwc-g210.c)4
-rw-r--r--drivers/ufs/host/tc-dwc-g210.h (renamed from drivers/scsi/ufs/tc-dwc-g210.h)0
-rw-r--r--drivers/ufs/host/ti-j721e-ufs.c (renamed from drivers/scsi/ufs/ti-j721e-ufs.c)0
-rw-r--r--drivers/ufs/host/ufs-exynos.c (renamed from drivers/scsi/ufs/ufs-exynos.c)6
-rw-r--r--drivers/ufs/host/ufs-exynos.h (renamed from drivers/scsi/ufs/ufs-exynos.h)0
-rw-r--r--drivers/ufs/host/ufs-hisi.c (renamed from drivers/scsi/ufs/ufs-hisi.c)8
-rw-r--r--drivers/ufs/host/ufs-hisi.h (renamed from drivers/scsi/ufs/ufs-hisi.h)0
-rw-r--r--drivers/ufs/host/ufs-mediatek-trace.h (renamed from drivers/scsi/ufs/ufs-mediatek-trace.h)2
-rw-r--r--drivers/ufs/host/ufs-mediatek.c (renamed from drivers/scsi/ufs/ufs-mediatek.c)6
-rw-r--r--drivers/ufs/host/ufs-mediatek.h (renamed from drivers/scsi/ufs/ufs-mediatek.h)0
-rw-r--r--drivers/ufs/host/ufs-qcom-ice.c (renamed from drivers/scsi/ufs/ufs-qcom-ice.c)0
-rw-r--r--drivers/ufs/host/ufs-qcom.c (renamed from drivers/scsi/ufs/ufs-qcom.c)8
-rw-r--r--drivers/ufs/host/ufs-qcom.h (renamed from drivers/scsi/ufs/ufs-qcom.h)2
-rw-r--r--drivers/ufs/host/ufshcd-dwc.c (renamed from drivers/scsi/ufs/ufshcd-dwc.c)4
-rw-r--r--drivers/ufs/host/ufshcd-dwc.h (renamed from drivers/scsi/ufs/ufshcd-dwc.h)2
-rw-r--r--drivers/ufs/host/ufshcd-pci.c (renamed from drivers/scsi/ufs/ufshcd-pci.c)2
-rw-r--r--drivers/ufs/host/ufshcd-pltfrm.c (renamed from drivers/scsi/ufs/ufshcd-pltfrm.c)4
-rw-r--r--drivers/ufs/host/ufshcd-pltfrm.h (renamed from drivers/scsi/ufs/ufshcd-pltfrm.h)2
-rw-r--r--drivers/ufs/host/ufshci-dwc.h (renamed from drivers/scsi/ufs/ufshci-dwc.h)0
52 files changed, 146 insertions, 2920 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 8d6cd5d08722..a7ec388e1848 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -107,6 +107,8 @@ source "drivers/usb/Kconfig"
source "drivers/mmc/Kconfig"
+source "drivers/ufs/Kconfig"
+
source "drivers/memstick/Kconfig"
source "drivers/leds/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 020780b6b4d2..8b4b90202e58 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -128,6 +128,7 @@ obj-$(CONFIG_PM_OPP) += opp/
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_CPU_IDLE) += cpuidle/
obj-y += mmc/
+obj-y += ufs/
obj-$(CONFIG_MEMSTICK) += memstick/
obj-$(CONFIG_NEW_LEDS) += leds/
obj-$(CONFIG_INFINIBAND) += infiniband/
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 6e3a04107bb6..a9fe5152addd 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -500,7 +500,6 @@ source "drivers/scsi/megaraid/Kconfig.megaraid"
source "drivers/scsi/mpt3sas/Kconfig"
source "drivers/scsi/mpi3mr/Kconfig"
source "drivers/scsi/smartpqi/Kconfig"
-source "drivers/scsi/ufs/Kconfig"
config SCSI_HPTIOP
tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 19814c26c908..2ad3bc052531 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -101,7 +101,6 @@ obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
obj-$(CONFIG_MEGARAID_SAS) += megaraid/
obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/
obj-$(CONFIG_SCSI_MPI3MR) += mpi3mr/
-obj-$(CONFIG_SCSI_UFSHCD) += ufs/
obj-$(CONFIG_SCSI_ACARD) += atp870u.o
obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o
obj-$(CONFIG_SCSI_INITIO) += initio.o
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
deleted file mode 100644
index 1bba3fead2ce..000000000000
--- a/drivers/scsi/ufs/ufs.h
+++ /dev/null
@@ -1,623 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Universal Flash Storage Host controller driver
- * Copyright (C) 2011-2013 Samsung India Software Operations
- *
- * Authors:
- * Santosh Yaraganavi <santosh.sy@samsung.com>
- * Vinayak Holikatti <h.vinayak@samsung.com>
- */
-
-#ifndef _UFS_H
-#define _UFS_H
-
-#include <linux/mutex.h>
-#include <linux/types.h>
-#include <uapi/scsi/scsi_bsg_ufs.h>
-
-#define GENERAL_UPIU_REQUEST_SIZE (sizeof(struct utp_upiu_req))
-#define QUERY_DESC_MAX_SIZE 255
-#define QUERY_DESC_MIN_SIZE 2
-#define QUERY_DESC_HDR_SIZE 2
-#define QUERY_OSF_SIZE (GENERAL_UPIU_REQUEST_SIZE - \
- (sizeof(struct utp_upiu_header)))
-#define UFS_SENSE_SIZE 18
-
-#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
- cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
- (byte1 << 8) | (byte0))
-/*
- * UFS device may have standard LUs and LUN id could be from 0x00 to
- * 0x7F. Standard LUs use "Peripheral Device Addressing Format".
- * UFS device may also have the Well Known LUs (also referred as W-LU)
- * which again could be from 0x00 to 0x7F. For W-LUs, device only use
- * the "Extended Addressing Format" which means the W-LUNs would be
- * from 0xc100 (SCSI_W_LUN_BASE) onwards.
- * This means max. LUN number reported from UFS device could be 0xC17F.
- */
-#define UFS_UPIU_MAX_UNIT_NUM_ID 0x7F
-#define UFS_MAX_LUNS (SCSI_W_LUN_BASE + UFS_UPIU_MAX_UNIT_NUM_ID)
-#define UFS_UPIU_WLUN_ID (1 << 7)
-#define UFS_RPMB_UNIT 0xC4
-
-/* WriteBooster buffer is available only for the logical unit from 0 to 7 */
-#define UFS_UPIU_MAX_WB_LUN_ID 8
-
-/*
- * WriteBooster buffer lifetime has a limit setted by vendor.
- * If it is over the limit, WriteBooster feature will be disabled.
- */
-#define UFS_WB_EXCEED_LIFETIME 0x0B
-
-/* Well known logical unit id in LUN field of UPIU */
-enum {
- UFS_UPIU_REPORT_LUNS_WLUN = 0x81,
- UFS_UPIU_UFS_DEVICE_WLUN = 0xD0,
- UFS_UPIU_BOOT_WLUN = 0xB0,
- UFS_UPIU_RPMB_WLUN = 0xC4,
-};
-
-/*
- * UFS Protocol Information Unit related definitions
- */
-
-/* Task management functions */
-enum {
- UFS_ABORT_TASK = 0x01,
- UFS_ABORT_TASK_SET = 0x02,
- UFS_CLEAR_TASK_SET = 0x04,
- UFS_LOGICAL_RESET = 0x08,
- UFS_QUERY_TASK = 0x80,
- UFS_QUERY_TASK_SET = 0x81,
-};
-
-/* UTP UPIU Transaction Codes Initiator to Target */
-enum {
- UPIU_TRANSACTION_NOP_OUT = 0x00,
- UPIU_TRANSACTION_COMMAND = 0x01,
- UPIU_TRANSACTION_DATA_OUT = 0x02,
- UPIU_TRANSACTION_TASK_REQ = 0x04,
- UPIU_TRANSACTION_QUERY_REQ = 0x16,
-};
-
-/* UTP UPIU Transaction Codes Target to Initiator */
-enum {
- UPIU_TRANSACTION_NOP_IN = 0x20,
- UPIU_TRANSACTION_RESPONSE = 0x21,
- UPIU_TRANSACTION_DATA_IN = 0x22,
- UPIU_TRANSACTION_TASK_RSP = 0x24,
- UPIU_TRANSACTION_READY_XFER = 0x31,
- UPIU_TRANSACTION_QUERY_RSP = 0x36,
- UPIU_TRANSACTION_REJECT_UPIU = 0x3F,
-};
-
-/* UPIU Read/Write flags */
-enum {
- UPIU_CMD_FLAGS_NONE = 0x00,
- UPIU_CMD_FLAGS_WRITE = 0x20,
- UPIU_CMD_FLAGS_READ = 0x40,
-};
-
-/* UPIU Task Attributes */
-enum {
- UPIU_TASK_ATTR_SIMPLE = 0x00,
- UPIU_TASK_ATTR_ORDERED = 0x01,
- UPIU_TASK_ATTR_HEADQ = 0x02,
- UPIU_TASK_ATTR_ACA = 0x03,
-};
-
-/* UPIU Query request function */
-enum {
- UPIU_QUERY_FUNC_STANDARD_READ_REQUEST = 0x01,
- UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST = 0x81,
-};
-
-/* Flag idn for Query Requests*/
-enum flag_idn {
- QUERY_FLAG_IDN_FDEVICEINIT = 0x01,
- QUERY_FLAG_IDN_PERMANENT_WPE = 0x02,
- QUERY_FLAG_IDN_PWR_ON_WPE = 0x03,
- QUERY_FLAG_IDN_BKOPS_EN = 0x04,
- QUERY_FLAG_IDN_LIFE_SPAN_MODE_ENABLE = 0x05,
- QUERY_FLAG_IDN_PURGE_ENABLE = 0x06,
- QUERY_FLAG_IDN_RESERVED2 = 0x07,
- QUERY_FLAG_IDN_FPHYRESOURCEREMOVAL = 0x08,
- QUERY_FLAG_IDN_BUSY_RTC = 0x09,
- QUERY_FLAG_IDN_RESERVED3 = 0x0A,
- QUERY_FLAG_IDN_PERMANENTLY_DISABLE_FW_UPDATE = 0x0B,
- QUERY_FLAG_IDN_WB_EN = 0x0E,
- QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN = 0x0F,
- QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8 = 0x10,
- QUERY_FLAG_IDN_HPB_RESET = 0x11,
- QUERY_FLAG_IDN_HPB_EN = 0x12,
-};
-
-/* Attribute idn for Query requests */
-enum attr_idn {
- QUERY_ATTR_IDN_BOOT_LU_EN = 0x00,
- QUERY_ATTR_IDN_MAX_HPB_SINGLE_CMD = 0x01,
- QUERY_ATTR_IDN_POWER_MODE = 0x02,
- QUERY_ATTR_IDN_ACTIVE_ICC_LVL = 0x03,
- QUERY_ATTR_IDN_OOO_DATA_EN = 0x04,
- QUERY_ATTR_IDN_BKOPS_STATUS = 0x05,
- QUERY_ATTR_IDN_PURGE_STATUS = 0x06,
- QUERY_ATTR_IDN_MAX_DATA_IN = 0x07,
- QUERY_ATTR_IDN_MAX_DATA_OUT = 0x08,
- QUERY_ATTR_IDN_DYN_CAP_NEEDED = 0x09,
- QUERY_ATTR_IDN_REF_CLK_FREQ = 0x0A,
- QUERY_ATTR_IDN_CONF_DESC_LOCK = 0x0B,
- QUERY_ATTR_IDN_MAX_NUM_OF_RTT = 0x0C,
- QUERY_ATTR_IDN_EE_CONTROL = 0x0D,
- QUERY_ATTR_IDN_EE_STATUS = 0x0E,
- QUERY_ATTR_IDN_SECONDS_PASSED = 0x0F,
- QUERY_ATTR_IDN_CNTX_CONF = 0x10,
- QUERY_ATTR_IDN_CORR_PRG_BLK_NUM = 0x11,
- QUERY_ATTR_IDN_RESERVED2 = 0x12,
- QUERY_ATTR_IDN_RESERVED3 = 0x13,
- QUERY_ATTR_IDN_FFU_STATUS = 0x14,
- QUERY_ATTR_IDN_PSA_STATE = 0x15,
- QUERY_ATTR_IDN_PSA_DATA_SIZE = 0x16,
- QUERY_ATTR_IDN_REF_CLK_GATING_WAIT_TIME = 0x17,
- QUERY_ATTR_IDN_CASE_ROUGH_TEMP = 0x18,
- QUERY_ATTR_IDN_HIGH_TEMP_BOUND = 0x19,
- QUERY_ATTR_IDN_LOW_TEMP_BOUND = 0x1A,
- QUERY_ATTR_IDN_WB_FLUSH_STATUS = 0x1C,
- QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE = 0x1D,
- QUERY_ATTR_IDN_WB_BUFF_LIFE_TIME_EST = 0x1E,
- QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE = 0x1F,
-};
-
-/* Descriptor idn for Query requests */
-enum desc_idn {
- QUERY_DESC_IDN_DEVICE = 0x0,
- QUERY_DESC_IDN_CONFIGURATION = 0x1,
- QUERY_DESC_IDN_UNIT = 0x2,
- QUERY_DESC_IDN_RFU_0 = 0x3,
- QUERY_DESC_IDN_INTERCONNECT = 0x4,
- QUERY_DESC_IDN_STRING = 0x5,
- QUERY_DESC_IDN_RFU_1 = 0x6,
- QUERY_DESC_IDN_GEOMETRY = 0x7,
- QUERY_DESC_IDN_POWER = 0x8,
- QUERY_DESC_IDN_HEALTH = 0x9,
- QUERY_DESC_IDN_MAX,
-};
-
-enum desc_header_offset {
- QUERY_DESC_LENGTH_OFFSET = 0x00,
- QUERY_DESC_DESC_TYPE_OFFSET = 0x01,
-};
-
-/* Unit descriptor parameters offsets in bytes*/
-enum unit_desc_param {
- UNIT_DESC_PARAM_LEN = 0x0,
- UNIT_DESC_PARAM_TYPE = 0x1,
- UNIT_DESC_PARAM_UNIT_INDEX = 0x2,
- UNIT_DESC_PARAM_LU_ENABLE = 0x3,
- UNIT_DESC_PARAM_BOOT_LUN_ID = 0x4,
- UNIT_DESC_PARAM_LU_WR_PROTECT = 0x5,
- UNIT_DESC_PARAM_LU_Q_DEPTH = 0x6,
- UNIT_DESC_PARAM_PSA_SENSITIVE = 0x7,
- UNIT_DESC_PARAM_MEM_TYPE = 0x8,
- UNIT_DESC_PARAM_DATA_RELIABILITY = 0x9,
- UNIT_DESC_PARAM_LOGICAL_BLK_SIZE = 0xA,
- UNIT_DESC_PARAM_LOGICAL_BLK_COUNT = 0xB,
- UNIT_DESC_PARAM_ERASE_BLK_SIZE = 0x13,
- UNIT_DESC_PARAM_PROVISIONING_TYPE = 0x17,
- UNIT_DESC_PARAM_PHY_MEM_RSRC_CNT = 0x18,
- UNIT_DESC_PARAM_CTX_CAPABILITIES = 0x20,
- UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1 = 0x22,
- UNIT_DESC_PARAM_HPB_LU_MAX_ACTIVE_RGNS = 0x23,
- UNIT_DESC_PARAM_HPB_PIN_RGN_START_OFF = 0x25,
- UNIT_DESC_PARAM_HPB_NUM_PIN_RGNS = 0x27,
- UNIT_DESC_PARAM_WB_BUF_ALLOC_UNITS = 0x29,
-};
-
-/* Device descriptor parameters offsets in bytes*/
-enum device_desc_param {
- DEVICE_DESC_PARAM_LEN = 0x0,
- DEVICE_DESC_PARAM_TYPE = 0x1,
- DEVICE_DESC_PARAM_DEVICE_TYPE = 0x2,
- DEVICE_DESC_PARAM_DEVICE_CLASS = 0x3,
- DEVICE_DESC_PARAM_DEVICE_SUB_CLASS = 0x4,
- DEVICE_DESC_PARAM_PRTCL = 0x5,
- DEVICE_DESC_PARAM_NUM_LU = 0x6,
- DEVICE_DESC_PARAM_NUM_WLU = 0x7,
- DEVICE_DESC_PARAM_BOOT_ENBL = 0x8,
- DEVICE_DESC_PARAM_DESC_ACCSS_ENBL = 0x9,
- DEVICE_DESC_PARAM_INIT_PWR_MODE = 0xA,
- DEVICE_DESC_PARAM_HIGH_PR_LUN = 0xB,
- DEVICE_DESC_PARAM_SEC_RMV_TYPE = 0xC,
- DEVICE_DESC_PARAM_SEC_LU = 0xD,
- DEVICE_DESC_PARAM_BKOP_TERM_LT = 0xE,
- DEVICE_DESC_PARAM_ACTVE_ICC_LVL = 0xF,
- DEVICE_DESC_PARAM_SPEC_VER = 0x10,
- DEVICE_DESC_PARAM_MANF_DATE = 0x12,
- DEVICE_DESC_PARAM_MANF_NAME = 0x14,
- DEVICE_DESC_PARAM_PRDCT_NAME = 0x15,
- DEVICE_DESC_PARAM_SN = 0x16,
- DEVICE_DESC_PARAM_OEM_ID = 0x17,
- DEVICE_DESC_PARAM_MANF_ID = 0x18,
- DEVICE_DESC_PARAM_UD_OFFSET = 0x1A,
- DEVICE_DESC_PARAM_UD_LEN = 0x1B,
- DEVICE_DESC_PARAM_RTT_CAP = 0x1C,
- DEVICE_DESC_PARAM_FRQ_RTC = 0x1D,
- DEVICE_DESC_PARAM_UFS_FEAT = 0x1F,
- DEVICE_DESC_PARAM_FFU_TMT = 0x20,
- DEVICE_DESC_PARAM_Q_DPTH = 0x21,
- DEVICE_DESC_PARAM_DEV_VER = 0x22,
- DEVICE_DESC_PARAM_NUM_SEC_WPA = 0x24,
- DEVICE_DESC_PARAM_PSA_MAX_DATA = 0x25,
- DEVICE_DESC_PARAM_PSA_TMT = 0x29,
- DEVICE_DESC_PARAM_PRDCT_REV = 0x2A,
- DEVICE_DESC_PARAM_HPB_VER = 0x40,
- DEVICE_DESC_PARAM_HPB_CONTROL = 0x42,
- DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP = 0x4F,
- DEVICE_DESC_PARAM_WB_PRESRV_USRSPC_EN = 0x53,
- DEVICE_DESC_PARAM_WB_TYPE = 0x54,
- DEVICE_DESC_PARAM_WB_SHARED_ALLOC_UNITS = 0x55,
-};
-
-/* Interconnect descriptor parameters offsets in bytes*/
-enum interconnect_desc_param {
- INTERCONNECT_DESC_PARAM_LEN = 0x0,
- INTERCONNECT_DESC_PARAM_TYPE = 0x1,
- INTERCONNECT_DESC_PARAM_UNIPRO_VER = 0x2,
- INTERCONNECT_DESC_PARAM_MPHY_VER = 0x4,
-};
-
-/* Geometry descriptor parameters offsets in bytes*/
-enum geometry_desc_param {
- GEOMETRY_DESC_PARAM_LEN = 0x0,
- GEOMETRY_DESC_PARAM_TYPE = 0x1,
- GEOMETRY_DESC_PARAM_DEV_CAP = 0x4,
- GEOMETRY_DESC_PARAM_MAX_NUM_LUN = 0xC,
- GEOMETRY_DESC_PARAM_SEG_SIZE = 0xD,
- GEOMETRY_DESC_PARAM_ALLOC_UNIT_SIZE = 0x11,
- GEOMETRY_DESC_PARAM_MIN_BLK_SIZE = 0x12,
- GEOMETRY_DESC_PARAM_OPT_RD_BLK_SIZE = 0x13,
- GEOMETRY_DESC_PARAM_OPT_WR_BLK_SIZE = 0x14,
- GEOMETRY_DESC_PARAM_MAX_IN_BUF_SIZE = 0x15,
- GEOMETRY_DESC_PARAM_MAX_OUT_BUF_SIZE = 0x16,
- GEOMETRY_DESC_PARAM_RPMB_RW_SIZE = 0x17,
- GEOMETRY_DESC_PARAM_DYN_CAP_RSRC_PLC = 0x18,
- GEOMETRY_DESC_PARAM_DATA_ORDER = 0x19,
- GEOMETRY_DESC_PARAM_MAX_NUM_CTX = 0x1A,
- GEOMETRY_DESC_PARAM_TAG_UNIT_SIZE = 0x1B,
- GEOMETRY_DESC_PARAM_TAG_RSRC_SIZE = 0x1C,
- GEOMETRY_DESC_PARAM_SEC_RM_TYPES = 0x1D,
- GEOMETRY_DESC_PARAM_MEM_TYPES = 0x1E,
- GEOMETRY_DESC_PARAM_SCM_MAX_NUM_UNITS = 0x20,
- GEOMETRY_DESC_PARAM_SCM_CAP_ADJ_FCTR = 0x24,
- GEOMETRY_DESC_PARAM_NPM_MAX_NUM_UNITS = 0x26,
- GEOMETRY_DESC_PARAM_NPM_CAP_ADJ_FCTR = 0x2A,
- GEOMETRY_DESC_PARAM_ENM1_MAX_NUM_UNITS = 0x2C,
- GEOMETRY_DESC_PARAM_ENM1_CAP_ADJ_FCTR = 0x30,
- GEOMETRY_DESC_PARAM_ENM2_MAX_NUM_UNITS = 0x32,
- GEOMETRY_DESC_PARAM_ENM2_CAP_ADJ_FCTR = 0x36,
- GEOMETRY_DESC_PARAM_ENM3_MAX_NUM_UNITS = 0x38,
- GEOMETRY_DESC_PARAM_ENM3_CAP_ADJ_FCTR = 0x3C,
- GEOMETRY_DESC_PARAM_ENM4_MAX_NUM_UNITS = 0x3E,
- GEOMETRY_DESC_PARAM_ENM4_CAP_ADJ_FCTR = 0x42,
- GEOMETRY_DESC_PARAM_OPT_LOG_BLK_SIZE = 0x44,
- GEOMETRY_DESC_PARAM_HPB_REGION_SIZE = 0x48,
- GEOMETRY_DESC_PARAM_HPB_NUMBER_LU = 0x49,
- GEOMETRY_DESC_PARAM_HPB_SUBREGION_SIZE = 0x4A,
- GEOMETRY_DESC_PARAM_HPB_MAX_ACTIVE_REGS = 0x4B,
- GEOMETRY_DESC_PARAM_WB_MAX_ALLOC_UNITS = 0x4F,
- GEOMETRY_DESC_PARAM_WB_MAX_WB_LUNS = 0x53,
- GEOMETRY_DESC_PARAM_WB_BUFF_CAP_ADJ = 0x54,
- GEOMETRY_DESC_PARAM_WB_SUP_RED_TYPE = 0x55,
- GEOMETRY_DESC_PARAM_WB_SUP_WB_TYPE = 0x56,
-};
-
-/* Health descriptor parameters offsets in bytes*/
-enum health_desc_param {
- HEALTH_DESC_PARAM_LEN = 0x0,
- HEALTH_DESC_PARAM_TYPE = 0x1,
- HEALTH_DESC_PARAM_EOL_INFO = 0x2,
- HEALTH_DESC_PARAM_LIFE_TIME_EST_A = 0x3,
- HEALTH_DESC_PARAM_LIFE_TIME_EST_B = 0x4,
-};
-
-/* WriteBooster buffer mode */
-enum {
- WB_BUF_MODE_LU_DEDICATED = 0x0,
- WB_BUF_MODE_SHARED = 0x1,
-};
-
-/*
- * Logical Unit Write Protect
- * 00h: LU not write protected
- * 01h: LU write protected when fPowerOnWPEn =1
- * 02h: LU permanently write protected when fPermanentWPEn =1
- */
-enum ufs_lu_wp_type {
- UFS_LU_NO_WP = 0x00,
- UFS_LU_POWER_ON_WP = 0x01,
- UFS_LU_PERM_WP = 0x02,
-};
-
-/* bActiveICCLevel parameter current units */
-enum {
- UFSHCD_NANO_AMP = 0,
- UFSHCD_MICRO_AMP = 1,
- UFSHCD_MILI_AMP = 2,
- UFSHCD_AMP = 3,
-};
-
-/* Possible values for dExtendedUFSFeaturesSupport */
-enum {
- UFS_DEV_LOW_TEMP_NOTIF = BIT(4),
- UFS_DEV_HIGH_TEMP_NOTIF = BIT(5),
- UFS_DEV_EXT_TEMP_NOTIF = BIT(6),
- UFS_DEV_HPB_SUPPORT = BIT(7),
- UFS_DEV_WRITE_BOOSTER_SUP = BIT(8),
-};
-#define UFS_DEV_HPB_SUPPORT_VERSION 0x310
-
-#define POWER_DESC_MAX_ACTV_ICC_LVLS 16
-
-/* Attribute bActiveICCLevel parameter bit masks definitions */
-#define ATTR_ICC_LVL_UNIT_OFFSET 14
-#define ATTR_ICC_LVL_UNIT_MASK (0x3 << ATTR_ICC_LVL_UNIT_OFFSET)
-#define ATTR_ICC_LVL_VALUE_MASK 0x3FF
-
-/* Power descriptor parameters offsets in bytes */
-enum power_desc_param_offset {
- PWR_DESC_LEN = 0x0,
- PWR_DESC_TYPE = 0x1,
- PWR_DESC_ACTIVE_LVLS_VCC_0 = 0x2,
- PWR_DESC_ACTIVE_LVLS_VCCQ_0 = 0x22,
- PWR_DESC_ACTIVE_LVLS_VCCQ2_0 = 0x42,
-};
-
-/* Exception event mask values */
-enum {
- MASK_EE_STATUS = 0xFFFF,
- MASK_EE_DYNCAP_EVENT = BIT(0),
- MASK_EE_SYSPOOL_EVENT = BIT(1),
- MASK_EE_URGENT_BKOPS = BIT(2),
- MASK_EE_TOO_HIGH_TEMP = BIT(3),
- MASK_EE_TOO_LOW_TEMP = BIT(4),
- MASK_EE_WRITEBOOSTER_EVENT = BIT(5),
- MASK_EE_PERFORMANCE_THROTTLING = BIT(6),
-};
-#define MASK_EE_URGENT_TEMP (MASK_EE_TOO_HIGH_TEMP | MASK_EE_TOO_LOW_TEMP)
-
-/* Background operation status */
-enum bkops_status {
- BKOPS_STATUS_NO_OP = 0x0,
- BKOPS_STATUS_NON_CRITICAL = 0x1,
- BKOPS_STATUS_PERF_IMPACT = 0x2,
- BKOPS_STATUS_CRITICAL = 0x3,
- BKOPS_STATUS_MAX = BKOPS_STATUS_CRITICAL,
-};
-
-/* UTP QUERY Transaction Specific Fields OpCode */
-enum query_opcode {
- UPIU_QUERY_OPCODE_NOP = 0x0,
- UPIU_QUERY_OPCODE_READ_DESC = 0x1,
- UPIU_QUERY_OPCODE_WRITE_DESC = 0x2,
- UPIU_QUERY_OPCODE_READ_ATTR = 0x3,
- UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4,
- UPIU_QUERY_OPCODE_READ_FLAG = 0x5,
- UPIU_QUERY_OPCODE_SET_FLAG = 0x6,
- UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7,
- UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8,
-};
-
-/* bRefClkFreq attribute values */
-enum ufs_ref_clk_freq {
- REF_CLK_FREQ_19_2_MHZ = 0,
- REF_CLK_FREQ_26_MHZ = 1,
- REF_CLK_FREQ_38_4_MHZ = 2,
- REF_CLK_FREQ_52_MHZ = 3,
- REF_CLK_FREQ_INVAL = -1,
-};
-
-/* Query response result code */
-enum {
- QUERY_RESULT_SUCCESS = 0x00,
- QUERY_RESULT_NOT_READABLE = 0xF6,
- QUERY_RESULT_NOT_WRITEABLE = 0xF7,
- QUERY_RESULT_ALREADY_WRITTEN = 0xF8,
- QUERY_RESULT_INVALID_LENGTH = 0xF9,
- QUERY_RESULT_INVALID_VALUE = 0xFA,
- QUERY_RESULT_INVALID_SELECTOR = 0xFB,
- QUERY_RESULT_INVALID_INDEX = 0xFC,
- QUERY_RESULT_INVALID_IDN = 0xFD,
- QUERY_RESULT_INVALID_OPCODE = 0xFE,
- QUERY_RESULT_GENERAL_FAILURE = 0xFF,
-};
-
-/* UTP Transfer Request Command Type (CT) */
-enum {
- UPIU_COMMAND_SET_TYPE_SCSI = 0x0,
- UPIU_COMMAND_SET_TYPE_UFS = 0x1,
- UPIU_COMMAND_SET_TYPE_QUERY = 0x2,
-};
-
-/* UTP Transfer Request Command Offset */
-#define UPIU_COMMAND_TYPE_OFFSET 28
-
-/* Offset of the response code in the UPIU header */
-#define UPIU_RSP_CODE_OFFSET 8
-
-enum {
- MASK_SCSI_STATUS = 0xFF,
- MASK_TASK_RESPONSE = 0xFF00,
- MASK_RSP_UPIU_RESULT = 0xFFFF,
- MASK_QUERY_DATA_SEG_LEN = 0xFFFF,
- MASK_RSP_UPIU_DATA_SEG_LEN = 0xFFFF,
- MASK_RSP_EXCEPTION_EVENT = 0x10000,
- MASK_TM_SERVICE_RESP = 0xFF,
- MASK_TM_FUNC = 0xFF,
-};
-
-/* Task management service response */
-enum {
- UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00,
- UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04,
- UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED = 0x08,
- UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05,
- UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09,
-};
-
-/* UFS device power modes */
-enum ufs_dev_pwr_mode {
- UFS_ACTIVE_PWR_MODE = 1,
- UFS_SLEEP_PWR_MODE = 2,
- UFS_POWERDOWN_PWR_MODE = 3,
- UFS_DEEPSLEEP_PWR_MODE = 4,
-};
-
-#define UFS_WB_BUF_REMAIN_PERCENT(val) ((val) / 10)
-
-/**
- * struct utp_cmd_rsp - Response UPIU structure
- * @residual_transfer_count: Residual transfer count DW-3
- * @reserved: Reserved double words DW-4 to DW-7
- * @sense_data_len: Sense data length DW-8 U16
- * @sense_data: Sense data field DW-8 to DW-12
- */
-struct utp_cmd_rsp {
- __be32 residual_transfer_count;
- __be32 reserved[4];
- __be16 sense_data_len;
- u8 sense_data[UFS_SENSE_SIZE];
-};
-
-struct ufshpb_active_field {
- __be16 active_rgn;
- __be16 active_srgn;
-};
-#define HPB_ACT_FIELD_SIZE 4
-
-/**
- * struct utp_hpb_rsp - Response UPIU structure
- * @residual_transfer_count: Residual transfer count DW-3
- * @reserved1: Reserved double words DW-4 to DW-7
- * @sense_data_len: Sense data length DW-8 U16
- * @desc_type: Descriptor type of sense data
- * @additional_len: Additional length of sense data
- * @hpb_op: HPB operation type
- * @lun: LUN of response UPIU
- * @active_rgn_cnt: Active region count
- * @inactive_rgn_cnt: Inactive region count
- * @hpb_active_field: Recommended to read HPB region and subregion
- * @hpb_inactive_field: To be inactivated HPB region and subregion
- */
-struct utp_hpb_rsp {
- __be32 residual_transfer_count;
- __be32 reserved1[4];
- __be16 sense_data_len;
- u8 desc_type;
- u8 additional_len;
- u8 hpb_op;
- u8 lun;
- u8 active_rgn_cnt;
- u8 inactive_rgn_cnt;
- struct ufshpb_active_field hpb_active_field[2];
- __be16 hpb_inactive_field[2];
-};
-#define UTP_HPB_RSP_SIZE 40
-
-/**
- * struct utp_upiu_rsp - general upiu response structure
- * @header: UPIU header structure DW-0 to DW-2
- * @sr: fields structure for scsi command DW-3 to DW-12
- * @qr: fields structure for query request DW-3 to DW-7
- */
-struct utp_upiu_rsp {
- struct utp_upiu_header header;
- union {
- struct utp_cmd_rsp sr;
- struct utp_hpb_rsp hr;
- struct utp_upiu_query qr;
- };
-};
-
-/**
- * struct ufs_query_req - parameters for building a query request
- * @query_func: UPIU header query function
- * @upiu_req: the query request data
- */
-struct ufs_query_req {
- u8 query_func;
- struct utp_upiu_query upiu_req;
-};
-
-/**
- * struct ufs_query_resp - UPIU QUERY
- * @response: device response code
- * @upiu_res: query response data
- */
-struct ufs_query_res {
- u8 response;
- struct utp_upiu_query upiu_res;
-};
-
-/*
- * VCCQ & VCCQ2 current requirement when UFS device is in sleep state
- * and link is in Hibern8 state.
- */
-#define UFS_VREG_LPM_LOAD_UA 1000 /* uA */
-
-struct ufs_vreg {
- struct regulator *reg;
- const char *name;
- bool always_on;
- bool enabled;
- int max_uA;
-};
-
-struct ufs_vreg_info {
- struct ufs_vreg *vcc;
- struct ufs_vreg *vccq;
- struct ufs_vreg *vccq2;
- struct ufs_vreg *vdd_hba;
-};
-
-struct ufs_dev_info {
- bool f_power_on_wp_en;
- /* Keeps information if any of the LU is power on write protected */
- bool is_lu_power_on_wp;
- /* Maximum number of general LU supported by the UFS device */
- u8 max_lu_supported;
- u16 wmanufacturerid;
- /*UFS device Product Name */
- u8 *model;
- u16 wspecversion;
- u32 clk_gating_wait_us;
-
- /* UFS HPB related flag */
- bool hpb_enabled;
-
- /* UFS WB related flags */
- bool wb_enabled;
- bool wb_buf_flush_enabled;
- u8 wb_dedicated_lu;
- u8 wb_buffer_type;
-
- bool b_rpm_dev_flush_capable;
- u8 b_presrv_uspc_en;
-};
-
-/*
- * This enum is used in string mapping in include/trace/events/ufs.h.
- */
-enum ufs_trace_str_t {
- UFS_CMD_SEND, UFS_CMD_COMP, UFS_DEV_COMP,
- UFS_QUERY_SEND, UFS_QUERY_COMP, UFS_QUERY_ERR,
- UFS_TM_SEND, UFS_TM_COMP, UFS_TM_ERR
-};
-
-/*
- * Transaction Specific Fields (TSF) type in the UPIU package, this enum is
- * used in include/trace/events/ufs.h for UFS command trace.
- */
-enum ufs_trace_tsf_t {
- UFS_TSF_CDB, UFS_TSF_OSF, UFS_TSF_TM_INPUT, UFS_TSF_TM_OUTPUT
-};
-
-#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h
deleted file mode 100644
index bcb4f004bed5..000000000000
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _UFS_QUIRKS_H_
-#define _UFS_QUIRKS_H_
-
-/* return true if s1 is a prefix of s2 */
-#define STR_PRFX_EQUAL(s1, s2) !strncmp(s1, s2, strlen(s1))
-
-#define UFS_ANY_VENDOR 0xFFFF
-#define UFS_ANY_MODEL "ANY_MODEL"
-
-#define UFS_VENDOR_MICRON 0x12C
-#define UFS_VENDOR_SAMSUNG 0x1CE
-#define UFS_VENDOR_SKHYNIX 0x1AD
-#define UFS_VENDOR_TOSHIBA 0x198
-#define UFS_VENDOR_WDC 0x145
-
-/**
- * ufs_dev_quirk - ufs device quirk info
- * @card: ufs card details
- * @quirk: device quirk
- */
-struct ufs_dev_quirk {
- u16 wmanufacturerid;
- const u8 *model;
- unsigned int quirk;
-};
-
-/*
- * Some vendor's UFS device sends back to back NACs for the DL data frames
- * causing the host controller to raise the DFES error status. Sometimes
- * such UFS devices send back to back NAC without waiting for new
- * retransmitted DL frame from the host and in such cases it might be possible
- * the Host UniPro goes into bad state without raising the DFES error
- * interrupt. If this happens then all the pending commands would timeout
- * only after respective SW command (which is generally too large).
- *
- * We can workaround such device behaviour like this:
- * - As soon as SW sees the DL NAC error, it should schedule the error handler
- * - Error handler would sleep for 50ms to see if there are any fatal errors
- * raised by UFS controller.
- * - If there are fatal errors then SW does normal error recovery.
- * - If there are no fatal errors then SW sends the NOP command to device
- * to check if link is alive.
- * - If NOP command times out, SW does normal error recovery
- * - If NOP command succeed, skip the error handling.
- *
- * If DL NAC error is seen multiple times with some vendor's UFS devices then
- * enable this quirk to initiate quick error recovery and also silence related
- * error logs to reduce spamming of kernel logs.
- */
-#define UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS (1 << 2)
-
-/*
- * Few Toshiba UFS device models advertise RX_MIN_ACTIVATETIME_CAPABILITY as
- * 600us which may not be enough for reliable hibern8 exit hardware sequence
- * from UFS device.
- * To workaround this issue, host should set its PA_TACTIVATE time to 1ms even
- * if device advertises RX_MIN_ACTIVATETIME_CAPABILITY less than 1ms.
- */
-#define UFS_DEVICE_QUIRK_PA_TACTIVATE (1 << 4)
-
-/*
- * It seems some UFS devices may keep drawing more than sleep current
- * (atleast for 500us) from UFS rails (especially from VCCQ rail).
- * To avoid this situation, add 2ms delay before putting these UFS
- * rails in LPM mode.
- */
-#define UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM (1 << 6)
-
-/*
- * Some UFS devices require host PA_TACTIVATE to be lower than device
- * PA_TACTIVATE, enabling this quirk ensure this.
- */
-#define UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE (1 << 7)
-
-/*
- * The max. value PA_SaveConfigTime is 250 (10us) but this is not enough for
- * some vendors.
- * Gear switch from PWM to HS may fail even with this max. PA_SaveConfigTime.
- * Gear switch can be issued by host controller as an error recovery and any
- * software delay will not help on this case so we need to increase
- * PA_SaveConfigTime to >32us as per vendor recommendation.
- */
-#define UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME (1 << 8)
-
-/*
- * Some UFS devices require VS_DebugSaveConfigTime is 0x10,
- * enabling this quirk ensure this.
- */
-#define UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME (1 << 9)
-
-/*
- * Some pre-3.1 UFS devices can support extended features by upgrading
- * the firmware. Enable this quirk to make UFS core driver probe and enable
- * supported features on such devices.
- */
-#define UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES (1 << 10)
-
-/*
- * Some UFS devices require delay after VCC power rail is turned-off.
- * Enable this quirk to introduce 5ms delays after VCC power-off during
- * suspend flow.
- */
-#define UFS_DEVICE_QUIRK_DELAY_AFTER_LPM (1 << 11)
-
-/*
- * Some UFS devices require L2P entry should be swapped before being sent to the
- * UFS device for HPB READ command.
- */
-#define UFS_DEVICE_QUIRK_SWAP_L2P_ENTRY_FOR_HPB_READ (1 << 12)
-
-#endif /* UFS_QUIRKS_H_ */
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
deleted file mode 100644
index 2b0f3441b813..000000000000
--- a/drivers/scsi/ufs/ufshcd.h
+++ /dev/null
@@ -1,1230 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Universal Flash Storage Host controller driver
- * Copyright (C) 2011-2013 Samsung India Software Operations
- * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
- *
- * Authors:
- * Santosh Yaraganavi <santosh.sy@samsung.com>
- * Vinayak Holikatti <h.vinayak@samsung.com>
- */
-
-#ifndef _UFSHCD_H
-#define _UFSHCD_H
-
-#include <linux/bitfield.h>
-#include <linux/blk-crypto-profile.h>
-#include <linux/blk-mq.h>
-#include <linux/devfreq.h>
-#include <linux/pm_runtime.h>
-#include <scsi/scsi_device.h>
-#include "unipro.h"
-#include "ufs.h"
-#include "ufs_quirks.h"
-#include "ufshci.h"
-
-#define UFSHCD "ufshcd"
-
-struct ufs_hba;
-
-enum dev_cmd_type {
- DEV_CMD_TYPE_NOP = 0x0,
- DEV_CMD_TYPE_QUERY = 0x1,
-};
-
-enum ufs_event_type {
- /* uic specific errors */
- UFS_EVT_PA_ERR = 0,
- UFS_EVT_DL_ERR,
- UFS_EVT_NL_ERR,
- UFS_EVT_TL_ERR,
- UFS_EVT_DME_ERR,
-
- /* fatal errors */
- UFS_EVT_AUTO_HIBERN8_ERR,
- UFS_EVT_FATAL_ERR,
- UFS_EVT_LINK_STARTUP_FAIL,
- UFS_EVT_RESUME_ERR,
- UFS_EVT_SUSPEND_ERR,
- UFS_EVT_WL_SUSP_ERR,
- UFS_EVT_WL_RES_ERR,
-
- /* abnormal events */
- UFS_EVT_DEV_RESET,
- UFS_EVT_HOST_RESET,
- UFS_EVT_ABORT,
-
- UFS_EVT_CNT,
-};
-
-/**
- * struct uic_command - UIC command structure
- * @command: UIC command
- * @argument1: UIC command argument 1
- * @argument2: UIC command argument 2
- * @argument3: UIC command argument 3
- * @cmd_active: Indicate if UIC command is outstanding
- * @done: UIC command completion
- */
-struct uic_command {
- u32 command;
- u32 argument1;
- u32 argument2;
- u32 argument3;
- int cmd_active;
- struct completion done;
-};
-
-/* Used to differentiate the power management options */
-enum ufs_pm_op {
- UFS_RUNTIME_PM,
- UFS_SYSTEM_PM,
- UFS_SHUTDOWN_PM,
-};
-
-/* Host <-> Device UniPro Link state */
-enum uic_link_state {
- UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */
- UIC_LINK_ACTIVE_STATE = 1, /* Link is in Fast/Slow/Sleep state */
- UIC_LINK_HIBERN8_STATE = 2, /* Link is in Hibernate state */
- UIC_LINK_BROKEN_STATE = 3, /* Link is in broken state */
-};
-
-#define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE)
-#define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \
- UIC_LINK_ACTIVE_STATE)
-#define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \
- UIC_LINK_HIBERN8_STATE)
-#define ufshcd_is_link_broken(hba) ((hba)->uic_link_state == \
- UIC_LINK_BROKEN_STATE)
-#define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE)
-#define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \
- UIC_LINK_ACTIVE_STATE)
-#define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \
- UIC_LINK_HIBERN8_STATE)
-#define ufshcd_set_link_broken(hba) ((hba)->uic_link_state = \
- UIC_LINK_BROKEN_STATE)
-
-#define ufshcd_set_ufs_dev_active(h) \
- ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE)
-#define ufshcd_set_ufs_dev_sleep(h) \
- ((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE)
-#define ufshcd_set_ufs_dev_poweroff(h) \
- ((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE)
-#define ufshcd_set_ufs_dev_deepsleep(h) \
- ((h)->curr_dev_pwr_mode = UFS_DEEPSLEEP_PWR_MODE)
-#define ufshcd_is_ufs_dev_active(h) \
- ((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE)
-#define ufshcd_is_ufs_dev_sleep(h) \
- ((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE)
-#define ufshcd_is_ufs_dev_poweroff(h) \
- ((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE)
-#define ufshcd_is_ufs_dev_deepsleep(h) \
- ((h)->curr_dev_pwr_mode == UFS_DEEPSLEEP_PWR_MODE)
-
-/*
- * UFS Power management levels.
- * Each level is in increasing order of power savings, except DeepSleep
- * which is lower than PowerDown with power on but not PowerDown with
- * power off.
- */
-enum ufs_pm_level {
- UFS_PM_LVL_0,
- UFS_PM_LVL_1,
- UFS_PM_LVL_2,
- UFS_PM_LVL_3,
- UFS_PM_LVL_4,
- UFS_PM_LVL_5,
- UFS_PM_LVL_6,
- UFS_PM_LVL_MAX
-};
-
-struct ufs_pm_lvl_states {
- enum ufs_dev_pwr_mode dev_state;
- enum uic_link_state link_state;
-};
-
-/**
- * struct ufshcd_lrb - local reference block
- * @utr_descriptor_ptr: UTRD address of the command
- * @ucd_req_ptr: UCD address of the command
- * @ucd_rsp_ptr: Response UPIU address for this command
- * @ucd_prdt_ptr: PRDT address of the command
- * @utrd_dma_addr: UTRD dma address for debug
- * @ucd_prdt_dma_addr: PRDT dma address for debug
- * @ucd_rsp_dma_addr: UPIU response dma address for debug
- * @ucd_req_dma_addr: UPIU request dma address for debug
- * @cmd: pointer to SCSI command
- * @scsi_status: SCSI status of the command
- * @command_type: SCSI, UFS, Query.
- * @task_tag: Task tag of the command
- * @lun: LUN of the command
- * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
- * @issue_time_stamp: time stamp for debug purposes
- * @compl_time_stamp: time stamp for statistics
- * @crypto_key_slot: the key slot to use for inline crypto (-1 if none)
- * @data_unit_num: the data unit number for the first block for inline crypto
- * @req_abort_skip: skip request abort task flag
- */
-struct ufshcd_lrb {
- struct utp_transfer_req_desc *utr_descriptor_ptr;
- struct utp_upiu_req *ucd_req_ptr;
- struct utp_upiu_rsp *ucd_rsp_ptr;
- struct ufshcd_sg_entry *ucd_prdt_ptr;
-
- dma_addr_t utrd_dma_addr;
- dma_addr_t ucd_req_dma_addr;
- dma_addr_t ucd_rsp_dma_addr;
- dma_addr_t ucd_prdt_dma_addr;
-
- struct scsi_cmnd *cmd;
- int scsi_status;
-
- int command_type;
- int task_tag;
- u8 lun; /* UPIU LUN id field is only 8-bit wide */
- bool intr_cmd;
- ktime_t issue_time_stamp;
- ktime_t compl_time_stamp;
-#ifdef CONFIG_SCSI_UFS_CRYPTO
- int crypto_key_slot;
- u64 data_unit_num;
-#endif
-
- bool req_abort_skip;
-};
-
-/**
- * struct ufs_query - holds relevant data structures for query request
- * @request: request upiu and function
- * @descriptor: buffer for sending/receiving descriptor
- * @response: response upiu and response
- */
-struct ufs_query {
- struct ufs_query_req request;
- u8 *descriptor;
- struct ufs_query_res response;
-};
-
-/**
- * struct ufs_dev_cmd - all assosiated fields with device management commands
- * @type: device management command type - Query, NOP OUT
- * @lock: lock to allow one command at a time
- * @complete: internal commands completion
- * @query: Device management query information
- */
-struct ufs_dev_cmd {
- enum dev_cmd_type type;
- struct mutex lock;
- struct completion *complete;
- struct ufs_query query;
-};
-
-/**
- * struct ufs_clk_info - UFS clock related info
- * @list: list headed by hba->clk_list_head
- * @clk: clock node
- * @name: clock name
- * @max_freq: maximum frequency supported by the clock
- * @min_freq: min frequency that can be used for clock scaling
- * @curr_freq: indicates the current frequency that it is set to
- * @keep_link_active: indicates that the clk should not be disabled if
- * link is active
- * @enabled: variable to check against multiple enable/disable
- */
-struct ufs_clk_info {
- struct list_head list;
- struct clk *clk;
- const char *name;
- u32 max_freq;
- u32 min_freq;
- u32 curr_freq;
- bool keep_link_active;
- bool enabled;
-};
-
-enum ufs_notify_change_status {
- PRE_CHANGE,
- POST_CHANGE,
-};
-
-struct ufs_pa_layer_attr {
- u32 gear_rx;
- u32 gear_tx;
- u32 lane_rx;
- u32 lane_tx;
- u32 pwr_rx;
- u32 pwr_tx;
- u32 hs_rate;
-};
-
-struct ufs_pwr_mode_info {
- bool is_valid;
- struct ufs_pa_layer_attr info;
-};
-
-/**
- * struct ufs_hba_variant_ops - variant specific callbacks
- * @name: variant name
- * @init: called when the driver is initialized
- * @exit: called to cleanup everything done in init
- * @get_ufs_hci_version: called to get UFS HCI version
- * @clk_scale_notify: notifies that clks are scaled up/down
- * @setup_clocks: called before touching any of the controller registers
- * @hce_enable_notify: called before and after HCE enable bit is set to allow
- * variant specific Uni-Pro initialization.
- * @link_startup_notify: called before and after Link startup is carried out
- * to allow variant specific Uni-Pro initialization.
- * @pwr_change_notify: called before and after a power mode change
- * is carried out to allow vendor spesific capabilities
- * to be set.
- * @setup_xfer_req: called before any transfer request is issued
- * to set some things
- * @setup_task_mgmt: called before any task management request is issued
- * to set some things
- * @hibern8_notify: called around hibern8 enter/exit
- * @apply_dev_quirks: called to apply device specific quirks
- * @fixup_dev_quirks: called to modify device specific quirks
- * @suspend: called during host controller PM callback
- * @resume: called during host controller PM callback
- * @dbg_register_dump: used to dump controller debug information
- * @phy_initialization: used to initialize phys
- * @device_reset: called to issue a reset pulse on the UFS device
- * @config_scaling_param: called to configure clock scaling parameters
- * @program_key: program or evict an inline encryption key
- * @event_notify: called to notify important events
- */
-struct ufs_hba_variant_ops {
- const char *name;
- int (*init)(struct ufs_hba *);
- void (*exit)(struct ufs_hba *);
- u32 (*get_ufs_hci_version)(struct ufs_hba *);
- int (*clk_scale_notify)(struct ufs_hba *, bool,
- enum ufs_notify_change_status);
- int (*setup_clocks)(struct ufs_hba *, bool,
- enum ufs_notify_change_status);
- int (*hce_enable_notify)(struct ufs_hba *,
- enum ufs_notify_change_status);
- int (*link_startup_notify)(struct ufs_hba *,
- enum ufs_notify_change_status);
- int (*pwr_change_notify)(struct ufs_hba *,
- enum ufs_notify_change_status status,
- struct ufs_pa_layer_attr *,
- struct ufs_pa_layer_attr *);
- void (*setup_xfer_req)(struct ufs_hba *hba, int tag,
- bool is_scsi_cmd);
- void (*setup_task_mgmt)(struct ufs_hba *, int, u8);
- void (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme,
- enum ufs_notify_change_status);
- int (*apply_dev_quirks)(struct ufs_hba *hba);
- void (*fixup_dev_quirks)(struct ufs_hba *hba);
- int (*suspend)(struct ufs_hba *, enum ufs_pm_op,
- enum ufs_notify_change_status);
- int (*resume)(struct ufs_hba *, enum ufs_pm_op);
- void (*dbg_register_dump)(struct ufs_hba *hba);
- int (*phy_initialization)(struct ufs_hba *);
- int (*device_reset)(struct ufs_hba *hba);
- void (*config_scaling_param)(struct ufs_hba *hba,
- struct devfreq_dev_profile *profile,
- struct devfreq_simple_ondemand_data *data);
- int (*program_key)(struct ufs_hba *hba,
- const union ufs_crypto_cfg_entry *cfg, int slot);
- void (*event_notify)(struct ufs_hba *hba,
- enum ufs_event_type evt, void *data);
-};
-
-/* clock gating state */
-enum clk_gating_state {
- CLKS_OFF,
- CLKS_ON,
- REQ_CLKS_OFF,
- REQ_CLKS_ON,
-};
-
-/**
- * struct ufs_clk_gating - UFS clock gating related info
- * @gate_work: worker to turn off clocks after some delay as specified in
- * delay_ms
- * @ungate_work: worker to turn on clocks that will be used in case of
- * interrupt context
- * @state: the current clocks state
- * @delay_ms: gating delay in ms
- * @is_suspended: clk gating is suspended when set to 1 which can be used
- * during suspend/resume
- * @delay_attr: sysfs attribute to control delay_attr
- * @enable_attr: sysfs attribute to enable/disable clock gating
- * @is_enabled: Indicates the current status of clock gating
- * @is_initialized: Indicates whether clock gating is initialized or not
- * @active_reqs: number of requests that are pending and should be waited for
- * completion before gating clocks.
- * @clk_gating_workq: workqueue for clock gating work.
- */
-struct ufs_clk_gating {
- struct delayed_work gate_work;
- struct work_struct ungate_work;
- enum clk_gating_state state;
- unsigned long delay_ms;
- bool is_suspended;
- struct device_attribute delay_attr;
- struct device_attribute enable_attr;
- bool is_enabled;
- bool is_initialized;
- int active_reqs;
- struct workqueue_struct *clk_gating_workq;
-};
-
-struct ufs_saved_pwr_info {
- struct ufs_pa_layer_attr info;
- bool is_valid;
-};
-
-/**
- * struct ufs_clk_scaling - UFS clock scaling related data
- * @active_reqs: number of requests that are pending. If this is zero when
- * devfreq ->target() function is called then schedule "suspend_work" to
- * suspend devfreq.
- * @tot_busy_t: Total busy time in current polling window
- * @window_start_t: Start time (in jiffies) of the current polling window
- * @busy_start_t: Start time of current busy period
- * @enable_attr: sysfs attribute to enable/disable clock scaling
- * @saved_pwr_info: UFS power mode may also be changed during scaling and this
- * one keeps track of previous power mode.
- * @workq: workqueue to schedule devfreq suspend/resume work
- * @suspend_work: worker to suspend devfreq
- * @resume_work: worker to resume devfreq
- * @min_gear: lowest HS gear to scale down to
- * @is_enabled: tracks if scaling is currently enabled or not, controlled by
- * clkscale_enable sysfs node
- * @is_allowed: tracks if scaling is currently allowed or not, used to block
- * clock scaling which is not invoked from devfreq governor
- * @is_initialized: Indicates whether clock scaling is initialized or not
- * @is_busy_started: tracks if busy period has started or not
- * @is_suspended: tracks if devfreq is suspended or not
- */
-struct ufs_clk_scaling {
- int active_reqs;
- unsigned long tot_busy_t;
- ktime_t window_start_t;
- ktime_t busy_start_t;
- struct device_attribute enable_attr;
- struct ufs_saved_pwr_info saved_pwr_info;
- struct workqueue_struct *workq;
- struct work_struct suspend_work;
- struct work_struct resume_work;
- u32 min_gear;
- bool is_enabled;
- bool is_allowed;
- bool is_initialized;
- bool is_busy_started;
- bool is_suspended;
-};
-
-#define UFS_EVENT_HIST_LENGTH 8
-/**
- * struct ufs_event_hist - keeps history of errors
- * @pos: index to indicate cyclic buffer position
- * @val: cyclic buffer for registers value
- * @tstamp: cyclic buffer for time stamp
- * @cnt: error counter
- */
-struct ufs_event_hist {
- int pos;
- u32 val[UFS_EVENT_HIST_LENGTH];
- ktime_t tstamp[UFS_EVENT_HIST_LENGTH];
- unsigned long long cnt;
-};
-
-/**
- * struct ufs_stats - keeps usage/err statistics
- * @last_intr_status: record the last interrupt status.
- * @last_intr_ts: record the last interrupt timestamp.
- * @hibern8_exit_cnt: Counter to keep track of number of exits,
- * reset this after link-startup.
- * @last_hibern8_exit_tstamp: Set time after the hibern8 exit.
- * Clear after the first successful command completion.
- * @event: array with event history.
- */
-struct ufs_stats {
- u32 last_intr_status;
- ktime_t last_intr_ts;
-
- u32 hibern8_exit_cnt;
- ktime_t last_hibern8_exit_tstamp;
- struct ufs_event_hist event[UFS_EVT_CNT];
-};
-
-/**
- * enum ufshcd_state - UFS host controller state
- * @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command
- * processing.
- * @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process
- * SCSI commands.
- * @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled.
- * SCSI commands may be submitted to the controller.
- * @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail
- * newly submitted SCSI commands with error code DID_BAD_TARGET.
- * @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery
- * failed. Fail all SCSI commands with error code DID_ERROR.
- */
-enum ufshcd_state {
- UFSHCD_STATE_RESET,
- UFSHCD_STATE_OPERATIONAL,
- UFSHCD_STATE_EH_SCHEDULED_NON_FATAL,
- UFSHCD_STATE_EH_SCHEDULED_FATAL,
- UFSHCD_STATE_ERROR,
-};
-
-enum ufshcd_quirks {
- /* Interrupt aggregation support is broken */
- UFSHCD_QUIRK_BROKEN_INTR_AGGR = 1 << 0,
-
- /*
- * delay before each dme command is required as the unipro
- * layer has shown instabilities
- */
- UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS = 1 << 1,
-
- /*
- * If UFS host controller is having issue in processing LCC (Line
- * Control Command) coming from device then enable this quirk.
- * When this quirk is enabled, host controller driver should disable
- * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
- * attribute of device to 0).
- */
- UFSHCD_QUIRK_BROKEN_LCC = 1 << 2,
-
- /*
- * The attribute PA_RXHSUNTERMCAP specifies whether or not the
- * inbound Link supports unterminated line in HS mode. Setting this
- * attribute to 1 fixes moving to HS gear.
- */
- UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP = 1 << 3,
-
- /*
- * This quirk needs to be enabled if the host controller only allows
- * accessing the peer dme attributes in AUTO mode (FAST AUTO or
- * SLOW AUTO).
- */
- UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE = 1 << 4,
-
- /*
- * This quirk needs to be enabled if the host controller doesn't
- * advertise the correct version in UFS_VER register. If this quirk
- * is enabled, standard UFS host driver will call the vendor specific
- * ops (get_ufs_hci_version) to get the correct version.
- */
- UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION = 1 << 5,
-
- /*
- * Clear handling for transfer/task request list is just opposite.
- */
- UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR = 1 << 6,
-
- /*
- * This quirk needs to be enabled if host controller doesn't allow
- * that the interrupt aggregation timer and counter are reset by s/w.
- */
- UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR = 1 << 7,
-
- /*
- * This quirks needs to be enabled if host controller cannot be
- * enabled via HCE register.
- */
- UFSHCI_QUIRK_BROKEN_HCE = 1 << 8,
-
- /*
- * This quirk needs to be enabled if the host controller regards
- * resolution of the values of PRDTO and PRDTL in UTRD as byte.
- */
- UFSHCD_QUIRK_PRDT_BYTE_GRAN = 1 << 9,
-
- /*
- * This quirk needs to be enabled if the host controller reports
- * OCS FATAL ERROR with device error through sense data
- */
- UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR = 1 << 10,
-
- /*
- * This quirk needs to be enabled if the host controller has
- * auto-hibernate capability but it doesn't work.
- */
- UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8 = 1 << 11,
-
- /*
- * This quirk needs to disable manual flush for write booster
- */
- UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL = 1 << 12,
-
- /*
- * This quirk needs to disable unipro timeout values
- * before power mode change
- */
- UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13,
-
- /*
- * This quirk allows only sg entries aligned with page size.
- */
- UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE = 1 << 14,
-
- /*
- * This quirk needs to be enabled if the host controller does not
- * support UIC command
- */
- UFSHCD_QUIRK_BROKEN_UIC_CMD = 1 << 15,
-
- /*
- * This quirk needs to be enabled if the host controller cannot
- * support physical host configuration.
- */
- UFSHCD_QUIRK_SKIP_PH_CONFIGURATION = 1 << 16,
-};
-
-enum ufshcd_caps {
- /* Allow dynamic clk gating */
- UFSHCD_CAP_CLK_GATING = 1 << 0,
-
- /* Allow hiberb8 with clk gating */
- UFSHCD_CAP_HIBERN8_WITH_CLK_GATING = 1 << 1,
-
- /* Allow dynamic clk scaling */
- UFSHCD_CAP_CLK_SCALING = 1 << 2,
-
- /* Allow auto bkops to enabled during runtime suspend */
- UFSHCD_CAP_AUTO_BKOPS_SUSPEND = 1 << 3,
-
- /*
- * This capability allows host controller driver to use the UFS HCI's
- * interrupt aggregation capability.
- * CAUTION: Enabling this might reduce overall UFS throughput.
- */
- UFSHCD_CAP_INTR_AGGR = 1 << 4,
-
- /*
- * This capability allows the device auto-bkops to be always enabled
- * except during suspend (both runtime and suspend).
- * Enabling this capability means that device will always be allowed
- * to do background operation when it's active but it might degrade
- * the performance of ongoing read/write operations.
- */
- UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5,
-
- /*
- * This capability allows host controller driver to automatically
- * enable runtime power management by itself instead of waiting
- * for userspace to control the power management.
- */
- UFSHCD_CAP_RPM_AUTOSUSPEND = 1 << 6,
-
- /*
- * This capability allows the host controller driver to turn-on
- * WriteBooster, if the underlying device supports it and is
- * provisioned to be used. This would increase the write performance.
- */
- UFSHCD_CAP_WB_EN = 1 << 7,
-
- /*
- * This capability allows the host controller driver to use the
- * inline crypto engine, if it is present
- */
- UFSHCD_CAP_CRYPTO = 1 << 8,
-
- /*
- * This capability allows the controller regulators to be put into
- * lpm mode aggressively during clock gating.
- * This would increase power savings.
- */
- UFSHCD_CAP_AGGR_POWER_COLLAPSE = 1 << 9,
-
- /*
- * This capability allows the host controller driver to use DeepSleep,
- * if it is supported by the UFS device. The host controller driver must
- * support device hardware reset via the hba->device_reset() callback,
- * in order to exit DeepSleep state.
- */
- UFSHCD_CAP_DEEPSLEEP = 1 << 10,
-
- /*
- * This capability allows the host controller driver to use temperature
- * notification if it is supported by the UFS device.
- */
- UFSHCD_CAP_TEMP_NOTIF = 1 << 11,
-};
-
-struct ufs_hba_variant_params {
- struct devfreq_dev_profile devfreq_profile;
- struct devfreq_simple_ondemand_data ondemand_data;
- u16 hba_enable_delay_us;
- u32 wb_flush_threshold;
-};
-
-#ifdef CONFIG_SCSI_UFS_HPB
-/**
- * struct ufshpb_dev_info - UFSHPB device related info
- * @num_lu: the number of user logical unit to check whether all lu finished
- * initialization
- * @rgn_size: device reported HPB region size
- * @srgn_size: device reported HPB sub-region size
- * @slave_conf_cnt: counter to check all lu finished initialization
- * @hpb_disabled: flag to check if HPB is disabled
- * @max_hpb_single_cmd: device reported bMAX_DATA_SIZE_FOR_SINGLE_CMD value
- * @is_legacy: flag to check HPB 1.0
- * @control_mode: either host or device
- */
-struct ufshpb_dev_info {
- int num_lu;
- int rgn_size;
- int srgn_size;
- atomic_t slave_conf_cnt;
- bool hpb_disabled;
- u8 max_hpb_single_cmd;
- bool is_legacy;
- u8 control_mode;
-};
-#endif
-
-struct ufs_hba_monitor {
- unsigned long chunk_size;
-
- unsigned long nr_sec_rw[2];
- ktime_t total_busy[2];
-
- unsigned long nr_req[2];
- /* latencies*/
- ktime_t lat_sum[2];
- ktime_t lat_max[2];
- ktime_t lat_min[2];
-
- u32 nr_queued[2];
- ktime_t busy_start_ts[2];
-
- ktime_t enabled_ts;
- bool enabled;
-};
-
-/**
- * struct ufs_hba - per adapter private structure
- * @mmio_base: UFSHCI base register address
- * @ucdl_base_addr: UFS Command Descriptor base address
- * @utrdl_base_addr: UTP Transfer Request Descriptor base address
- * @utmrdl_base_addr: UTP Task Management Descriptor base address
- * @ucdl_dma_addr: UFS Command Descriptor DMA address
- * @utrdl_dma_addr: UTRDL DMA address
- * @utmrdl_dma_addr: UTMRDL DMA address
- * @host: Scsi_Host instance of the driver
- * @dev: device handle
- * @ufs_device_wlun: WLUN that controls the entire UFS device.
- * @hwmon_device: device instance registered with the hwmon core.
- * @curr_dev_pwr_mode: active UFS device power mode.
- * @uic_link_state: active state of the link to the UFS device.
- * @rpm_lvl: desired UFS power management level during runtime PM.
- * @spm_lvl: desired UFS power management level during system PM.
- * @pm_op_in_progress: whether or not a PM operation is in progress.
- * @ahit: value of Auto-Hibernate Idle Timer register.
- * @lrb: local reference block
- * @outstanding_tasks: Bits representing outstanding task requests
- * @outstanding_lock: Protects @outstanding_reqs.
- * @outstanding_reqs: Bits representing outstanding transfer requests
- * @capabilities: UFS Controller Capabilities
- * @nutrs: Transfer Request Queue depth supported by controller
- * @nutmrs: Task Management Queue depth supported by controller
- * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock.
- * @ufs_version: UFS Version to which controller complies
- * @vops: pointer to variant specific operations
- * @vps: pointer to variant specific parameters
- * @priv: pointer to variant specific private data
- * @irq: Irq number of the controller
- * @is_irq_enabled: whether or not the UFS controller interrupt is enabled.
- * @dev_ref_clk_freq: reference clock frequency
- * @quirks: bitmask with information about deviations from the UFSHCI standard.
- * @dev_quirks: bitmask with information about deviations from the UFS standard.
- * @tmf_tag_set: TMF tag set.
- * @tmf_queue: Used to allocate TMF tags.
- * @tmf_rqs: array with pointers to TMF requests while these are in progress.
- * @active_uic_cmd: handle of active UIC command
- * @uic_cmd_mutex: mutex for UIC command
- * @uic_async_done: completion used during UIC processing
- * @ufshcd_state: UFSHCD state
- * @eh_flags: Error handling flags
- * @intr_mask: Interrupt Mask Bits
- * @ee_ctrl_mask: Exception event control mask
- * @ee_drv_mask: Exception event mask for driver
- * @ee_usr_mask: Exception event mask for user (set via debugfs)
- * @ee_ctrl_mutex: Used to serialize exception event information.
- * @is_powered: flag to check if HBA is powered
- * @shutting_down: flag to check if shutdown has been invoked
- * @host_sem: semaphore used to serialize concurrent contexts
- * @eh_wq: Workqueue that eh_work works on
- * @eh_work: Worker to handle UFS errors that require s/w attention
- * @eeh_work: Worker to handle exception events
- * @errors: HBA errors
- * @uic_error: UFS interconnect layer error status
- * @saved_err: sticky error mask
- * @saved_uic_err: sticky UIC error mask
- * @ufs_stats: various error counters
- * @force_reset: flag to force eh_work perform a full reset
- * @force_pmc: flag to force a power mode change
- * @silence_err_logs: flag to silence error logs
- * @dev_cmd: ufs device management command information
- * @last_dme_cmd_tstamp: time stamp of the last completed DME command
- * @nop_out_timeout: NOP OUT timeout value
- * @dev_info: information about the UFS device
- * @auto_bkops_enabled: to track whether bkops is enabled in device
- * @vreg_info: UFS device voltage regulator information
- * @clk_list_head: UFS host controller clocks list node head
- * @req_abort_count: number of times ufshcd_abort() has been called
- * @lanes_per_direction: number of lanes per data direction between the UFS
- * controller and the UFS device.
- * @pwr_info: holds current power mode
- * @max_pwr_info: keeps the device max valid pwm
- * @clk_gating: information related to clock gating
- * @caps: bitmask with information about UFS controller capabilities
- * @devfreq: frequency scaling information owned by the devfreq core
- * @clk_scaling: frequency scaling information owned by the UFS driver
- * @is_sys_suspended: whether or not the entire system has been suspended
- * @urgent_bkops_lvl: keeps track of urgent bkops level for device
- * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for
- * device is known or not.
- * @clk_scaling_lock: used to serialize device commands and clock scaling
- * @desc_size: descriptor sizes reported by device
- * @scsi_block_reqs_cnt: reference counting for scsi block requests
- * @bsg_dev: struct device associated with the BSG queue
- * @bsg_queue: BSG queue associated with the UFS controller
- * @rpm_dev_flush_recheck_work: used to suspend from RPM (runtime power
- * management) after the UFS device has finished a WriteBooster buffer
- * flush or auto BKOP.
- * @ufshpb_dev: information related to HPB (Host Performance Booster).
- * @monitor: statistics about UFS commands
- * @crypto_capabilities: Content of crypto capabilities register (0x100)
- * @crypto_cap_array: Array of crypto capabilities
- * @crypto_cfg_register: Start of the crypto cfg array
- * @crypto_profile: the crypto profile of this hba (if applicable)
- * @debugfs_root: UFS controller debugfs root directory
- * @debugfs_ee_work: used to restore ee_ctrl_mask after a delay
- * @debugfs_ee_rate_limit_ms: user configurable delay after which to restore
- * ee_ctrl_mask
- * @luns_avail: number of regular and well known LUNs supported by the UFS
- * device
- * @complete_put: whether or not to call ufshcd_rpm_put() from inside
- * ufshcd_resume_complete()
- */
-struct ufs_hba {
- void __iomem *mmio_base;
-
- /* Virtual memory reference */
- struct utp_transfer_cmd_desc *ucdl_base_addr;
- struct utp_transfer_req_desc *utrdl_base_addr;
- struct utp_task_req_desc *utmrdl_base_addr;
-
- /* DMA memory reference */
- dma_addr_t ucdl_dma_addr;
- dma_addr_t utrdl_dma_addr;
- dma_addr_t utmrdl_dma_addr;
-
- struct Scsi_Host *host;
- struct device *dev;
- struct scsi_device *ufs_device_wlun;
-
-#ifdef CONFIG_SCSI_UFS_HWMON
- struct device *hwmon_device;
-#endif
-
- enum ufs_dev_pwr_mode curr_dev_pwr_mode;
- enum uic_link_state uic_link_state;
- /* Desired UFS power management level during runtime PM */
- enum ufs_pm_level rpm_lvl;
- /* Desired UFS power management level during system PM */
- enum ufs_pm_level spm_lvl;
- int pm_op_in_progress;
-
- /* Auto-Hibernate Idle Timer register value */
- u32 ahit;
-
- struct ufshcd_lrb *lrb;
-
- unsigned long outstanding_tasks;
- spinlock_t outstanding_lock;
- unsigned long outstanding_reqs;
-
- u32 capabilities;
- int nutrs;
- int nutmrs;
- u32 reserved_slot;
- u32 ufs_version;
- const struct ufs_hba_variant_ops *vops;
- struct ufs_hba_variant_params *vps;
- void *priv;
- unsigned int irq;
- bool is_irq_enabled;
- enum ufs_ref_clk_freq dev_ref_clk_freq;
-
- unsigned int quirks; /* Deviations from standard UFSHCI spec. */
-
- /* Device deviations from standard UFS device spec. */
- unsigned int dev_quirks;
-
- struct blk_mq_tag_set tmf_tag_set;
- struct request_queue *tmf_queue;
- struct request **tmf_rqs;
-
- struct uic_command *active_uic_cmd;
- struct mutex uic_cmd_mutex;
- struct completion *uic_async_done;
-
- enum ufshcd_state ufshcd_state;
- u32 eh_flags;
- u32 intr_mask;
- u16 ee_ctrl_mask;
- u16 ee_drv_mask;
- u16 ee_usr_mask;
- struct mutex ee_ctrl_mutex;
- bool is_powered;
- bool shutting_down;
- struct semaphore host_sem;
-
- /* Work Queues */
- struct workqueue_struct *eh_wq;
- struct work_struct eh_work;
- struct work_struct eeh_work;
-
- /* HBA Errors */
- u32 errors;
- u32 uic_error;
- u32 saved_err;
- u32 saved_uic_err;
- struct ufs_stats ufs_stats;
- bool force_reset;
- bool force_pmc;
- bool silence_err_logs;
-
- /* Device management request data */
- struct ufs_dev_cmd dev_cmd;
- ktime_t last_dme_cmd_tstamp;
- int nop_out_timeout;
-
- /* Keeps information of the UFS device connected to this host */
- struct ufs_dev_info dev_info;
- bool auto_bkops_enabled;
- struct ufs_vreg_info vreg_info;
- struct list_head clk_list_head;
-
- /* Number of requests aborts */
- int req_abort_count;
-
- /* Number of lanes available (1 or 2) for Rx/Tx */
- u32 lanes_per_direction;
- struct ufs_pa_layer_attr pwr_info;
- struct ufs_pwr_mode_info max_pwr_info;
-
- struct ufs_clk_gating clk_gating;
- /* Control to enable/disable host capabilities */
- u32 caps;
-
- struct devfreq *devfreq;
- struct ufs_clk_scaling clk_scaling;
- bool is_sys_suspended;
-
- enum bkops_status urgent_bkops_lvl;
- bool is_urgent_bkops_lvl_checked;
-
- struct rw_semaphore clk_scaling_lock;
- unsigned char desc_size[QUERY_DESC_IDN_MAX];
- atomic_t scsi_block_reqs_cnt;
-
- struct device bsg_dev;
- struct request_queue *bsg_queue;
- struct delayed_work rpm_dev_flush_recheck_work;
-
-#ifdef CONFIG_SCSI_UFS_HPB
- struct ufshpb_dev_info ufshpb_dev;
-#endif
-
- struct ufs_hba_monitor monitor;
-
-#ifdef CONFIG_SCSI_UFS_CRYPTO
- union ufs_crypto_capabilities crypto_capabilities;
- union ufs_crypto_cap_entry *crypto_cap_array;
- u32 crypto_cfg_register;
- struct blk_crypto_profile crypto_profile;
-#endif
-#ifdef CONFIG_DEBUG_FS
- struct dentry *debugfs_root;
- struct delayed_work debugfs_ee_work;
- u32 debugfs_ee_rate_limit_ms;
-#endif
- u32 luns_avail;
- bool complete_put;
-};
-
-/* Returns true if clocks can be gated. Otherwise false */
-static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba)
-{
- return hba->caps & UFSHCD_CAP_CLK_GATING;
-}
-static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba)
-{
- return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
-}
-static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba)
-{
- return hba->caps & UFSHCD_CAP_CLK_SCALING;
-}
-static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
-{
- return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
-}
-static inline bool ufshcd_is_rpm_autosuspend_allowed(struct ufs_hba *hba)
-{
- return hba->caps & UFSHCD_CAP_RPM_AUTOSUSPEND;
-}
-
-static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba)
-{
- return (hba->caps & UFSHCD_CAP_INTR_AGGR) &&
- !(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR);
-}
-
-static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba)
-{
- return !!(ufshcd_is_link_hibern8(hba) &&
- (hba->caps & UFSHCD_CAP_AGGR_POWER_COLLAPSE));
-}
-
-static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba)
-{
- return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) &&
- !(hba->quirks & UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8);
-}
-
-static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba)
-{
- return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit);
-}
-
-static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba)
-{
- return hba->caps & UFSHCD_CAP_WB_EN;
-}
-
-#define ufshcd_writel(hba, val, reg) \
- writel((val), (hba)->mmio_base + (reg))
-#define ufshcd_readl(hba, reg) \
- readl((hba)->mmio_base + (reg))
-
-/**
- * ufshcd_rmwl - perform read/modify/write for a controller register
- * @hba: per adapter instance
- * @mask: mask to apply on read value
- * @val: actual value to write
- * @reg: register address
- */
-static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
-{
- u32 tmp;
-
- tmp = ufshcd_readl(hba, reg);
- tmp &= ~mask;
- tmp |= (val & mask);
- ufshcd_writel(hba, tmp, reg);
-}
-
-int ufshcd_alloc_host(struct device *, struct ufs_hba **);
-void ufshcd_dealloc_host(struct ufs_hba *);
-int ufshcd_hba_enable(struct ufs_hba *hba);
-int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int);
-int ufshcd_link_recovery(struct ufs_hba *hba);
-int ufshcd_make_hba_operational(struct ufs_hba *hba);
-void ufshcd_remove(struct ufs_hba *);
-int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
-int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
-void ufshcd_delay_us(unsigned long us, unsigned long tolerance);
-void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk);
-void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val);
-void ufshcd_hba_stop(struct ufs_hba *hba);
-void ufshcd_schedule_eh_work(struct ufs_hba *hba);
-
-static inline void check_upiu_size(void)
-{
- BUILD_BUG_ON(ALIGNED_UPIU_SIZE <
- GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE);
-}
-
-/**
- * ufshcd_set_variant - set variant specific data to the hba
- * @hba: per adapter instance
- * @variant: pointer to variant specific data
- */
-static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant)
-{
- BUG_ON(!hba);
- hba->priv = variant;
-}
-
-/**
- * ufshcd_get_variant - get variant specific data from the hba
- * @hba: per adapter instance
- */
-static inline void *ufshcd_get_variant(struct ufs_hba *hba)
-{
- BUG_ON(!hba);
- return hba->priv;
-}
-
-#ifdef CONFIG_PM
-extern int ufshcd_runtime_suspend(struct device *dev);
-extern int ufshcd_runtime_resume(struct device *dev);
-#endif
-#ifdef CONFIG_PM_SLEEP
-extern int ufshcd_system_suspend(struct device *dev);
-extern int ufshcd_system_resume(struct device *dev);
-#endif
-extern int ufshcd_shutdown(struct ufs_hba *hba);
-extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba,
- int agreed_gear,
- int adapt_val);
-extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
- u8 attr_set, u32 mib_val, u8 peer);
-extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
- u32 *mib_val, u8 peer);
-extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
- struct ufs_pa_layer_attr *desired_pwr_mode);
-
-/* UIC command interfaces for DME primitives */
-#define DME_LOCAL 0
-#define DME_PEER 1
-#define ATTR_SET_NOR 0 /* NORMAL */
-#define ATTR_SET_ST 1 /* STATIC */
-
-static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
- u32 mib_val)
-{
- return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
- mib_val, DME_LOCAL);
-}
-
-static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel,
- u32 mib_val)
-{
- return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
- mib_val, DME_LOCAL);
-}
-
-static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
- u32 mib_val)
-{
- return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
- mib_val, DME_PEER);
-}
-
-static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel,
- u32 mib_val)
-{
- return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
- mib_val, DME_PEER);
-}
-
-static inline int ufshcd_dme_get(struct ufs_hba *hba,
- u32 attr_sel, u32 *mib_val)
-{
- return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
-}
-
-static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
- u32 attr_sel, u32 *mib_val)
-{
- return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
-}
-
-static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info)
-{
- return (pwr_info->pwr_rx == FAST_MODE ||
- pwr_info->pwr_rx == FASTAUTO_MODE) &&
- (pwr_info->pwr_tx == FAST_MODE ||
- pwr_info->pwr_tx == FASTAUTO_MODE);
-}
-
-static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba)
-{
- return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
-}
-
-/* Expose Query-Request API */
-int ufshcd_query_descriptor_retry(struct ufs_hba *hba,
- enum query_opcode opcode,
- enum desc_idn idn, u8 index,
- u8 selector,
- u8 *desc_buf, int *buf_len);
-int ufshcd_read_desc_param(struct ufs_hba *hba,
- enum desc_idn desc_id,
- int desc_index,
- u8 param_offset,
- u8 *param_read_buf,
- u8 param_size);
-int ufshcd_query_attr_retry(struct ufs_hba *hba, enum query_opcode opcode,
- enum attr_idn idn, u8 index, u8 selector,
- u32 *attr_val);
-int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode,
- enum attr_idn idn, u8 index, u8 selector, u32 *attr_val);
-int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
- enum flag_idn idn, u8 index, bool *flag_res);
-
-void ufshcd_auto_hibern8_enable(struct ufs_hba *hba);
-void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit);
-void ufshcd_fixup_dev_quirks(struct ufs_hba *hba,
- const struct ufs_dev_quirk *fixups);
-#define SD_ASCII_STD true
-#define SD_RAW false
-int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index,
- u8 **buf, bool ascii);
-
-int ufshcd_hold(struct ufs_hba *hba, bool async);
-void ufshcd_release(struct ufs_hba *hba);
-
-void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value);
-
-void ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id,
- int *desc_length);
-
-u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba);
-
-int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd);
-
-int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
- struct utp_upiu_req *req_upiu,
- struct utp_upiu_req *rsp_upiu,
- int msgcode,
- u8 *desc_buff, int *buff_len,
- enum query_opcode desc_op);
-
-int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable);
-int ufshcd_suspend_prepare(struct device *dev);
-int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm);
-void ufshcd_resume_complete(struct device *dev);
-
-/* Wrapper functions for safely calling variant operations */
-static inline int ufshcd_vops_init(struct ufs_hba *hba)
-{
- if (hba->vops && hba->vops->init)
- return hba->vops->init(hba);
-
- return 0;
-}
-
-static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba)
-{
- if (hba->vops && hba->vops->phy_initialization)
- return hba->vops->phy_initialization(hba);
-
- return 0;
-}
-
-extern struct ufs_pm_lvl_states ufs_pm_lvl_states[];
-
-int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len,
- const char *prefix);
-
-int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask);
-int ufshcd_write_ee_control(struct ufs_hba *hba);
-int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask, u16 *other_mask,
- u16 set, u16 clr);
-
-#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
deleted file mode 100644
index f81aa95ffbc4..000000000000
--- a/drivers/scsi/ufs/ufshci.h
+++ /dev/null
@@ -1,510 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Universal Flash Storage Host controller driver
- * Copyright (C) 2011-2013 Samsung India Software Operations
- *
- * Authors:
- * Santosh Yaraganavi <santosh.sy@samsung.com>
- * Vinayak Holikatti <h.vinayak@samsung.com>
- */
-
-#ifndef _UFSHCI_H
-#define _UFSHCI_H
-
-#include <scsi/scsi_host.h>
-
-enum {
- TASK_REQ_UPIU_SIZE_DWORDS = 8,
- TASK_RSP_UPIU_SIZE_DWORDS = 8,
- ALIGNED_UPIU_SIZE = 512,
-};
-
-/* UFSHCI Registers */
-enum {
- REG_CONTROLLER_CAPABILITIES = 0x00,
- REG_UFS_VERSION = 0x08,
- REG_CONTROLLER_DEV_ID = 0x10,
- REG_CONTROLLER_PROD_ID = 0x14,
- REG_AUTO_HIBERNATE_IDLE_TIMER = 0x18,
- REG_INTERRUPT_STATUS = 0x20,
- REG_INTERRUPT_ENABLE = 0x24,
- REG_CONTROLLER_STATUS = 0x30,
- REG_CONTROLLER_ENABLE = 0x34,
- REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38,
- REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C,
- REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40,
- REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44,
- REG_UIC_ERROR_CODE_DME = 0x48,
- REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C,
- REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50,
- REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54,
- REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58,
- REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C,
- REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60,
- REG_UTP_TASK_REQ_LIST_BASE_L = 0x70,
- REG_UTP_TASK_REQ_LIST_BASE_H = 0x74,
- REG_UTP_TASK_REQ_DOOR_BELL = 0x78,
- REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C,
- REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80,
- REG_UIC_COMMAND = 0x90,
- REG_UIC_COMMAND_ARG_1 = 0x94,
- REG_UIC_COMMAND_ARG_2 = 0x98,
- REG_UIC_COMMAND_ARG_3 = 0x9C,
-
- UFSHCI_REG_SPACE_SIZE = 0xA0,
-
- REG_UFS_CCAP = 0x100,
- REG_UFS_CRYPTOCAP = 0x104,
-
- UFSHCI_CRYPTO_REG_SPACE_SIZE = 0x400,
-};
-
-/* Controller capability masks */
-enum {
- MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F,
- MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000,
- MASK_AUTO_HIBERN8_SUPPORT = 0x00800000,
- MASK_64_ADDRESSING_SUPPORT = 0x01000000,
- MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
- MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000,
- MASK_CRYPTO_SUPPORT = 0x10000000,
-};
-
-#define UFS_MASK(mask, offset) ((mask) << (offset))
-
-/* UFS Version 08h */
-#define MINOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 0)
-#define MAJOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 16)
-
-/*
- * Controller UFSHCI version
- * - 2.x and newer use the following scheme:
- * major << 8 + minor << 4
- * - 1.x has been converted to match this in
- * ufshcd_get_ufs_version()
- */
-static inline u32 ufshci_version(u32 major, u32 minor)
-{
- return (major << 8) + (minor << 4);
-}
-
-/*
- * HCDDID - Host Controller Identification Descriptor
- * - Device ID and Device Class 10h
- */
-#define DEVICE_CLASS UFS_MASK(0xFFFF, 0)
-#define DEVICE_ID UFS_MASK(0xFF, 24)
-
-/*
- * HCPMID - Host Controller Identification Descriptor
- * - Product/Manufacturer ID 14h
- */
-#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0)
-#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16)
-
-/* AHIT - Auto-Hibernate Idle Timer */
-#define UFSHCI_AHIBERN8_TIMER_MASK GENMASK(9, 0)
-#define UFSHCI_AHIBERN8_SCALE_MASK GENMASK(12, 10)
-#define UFSHCI_AHIBERN8_SCALE_FACTOR 10
-#define UFSHCI_AHIBERN8_MAX (1023 * 100000)
-
-/*
- * IS - Interrupt Status - 20h
- */
-#define UTP_TRANSFER_REQ_COMPL 0x1
-#define UIC_DME_END_PT_RESET 0x2
-#define UIC_ERROR 0x4
-#define UIC_TEST_MODE 0x8
-#define UIC_POWER_MODE 0x10
-#define UIC_HIBERNATE_EXIT 0x20
-#define UIC_HIBERNATE_ENTER 0x40
-#define UIC_LINK_LOST 0x80
-#define UIC_LINK_STARTUP 0x100
-#define UTP_TASK_REQ_COMPL 0x200
-#define UIC_COMMAND_COMPL 0x400
-#define DEVICE_FATAL_ERROR 0x800
-#define CONTROLLER_FATAL_ERROR 0x10000
-#define SYSTEM_BUS_FATAL_ERROR 0x20000
-#define CRYPTO_ENGINE_FATAL_ERROR 0x40000
-
-#define UFSHCD_UIC_HIBERN8_MASK (UIC_HIBERNATE_ENTER |\
- UIC_HIBERNATE_EXIT)
-
-#define UFSHCD_UIC_PWR_MASK (UFSHCD_UIC_HIBERN8_MASK |\
- UIC_POWER_MODE)
-
-#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK)
-
-#define UFSHCD_ERROR_MASK (UIC_ERROR |\
- DEVICE_FATAL_ERROR |\
- CONTROLLER_FATAL_ERROR |\
- SYSTEM_BUS_FATAL_ERROR |\
- CRYPTO_ENGINE_FATAL_ERROR)
-
-#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\
- CONTROLLER_FATAL_ERROR |\
- SYSTEM_BUS_FATAL_ERROR |\
- CRYPTO_ENGINE_FATAL_ERROR |\
- UIC_LINK_LOST)
-
-/* HCS - Host Controller Status 30h */
-#define DEVICE_PRESENT 0x1
-#define UTP_TRANSFER_REQ_LIST_READY 0x2
-#define UTP_TASK_REQ_LIST_READY 0x4
-#define UIC_COMMAND_READY 0x8
-#define HOST_ERROR_INDICATOR 0x10
-#define DEVICE_ERROR_INDICATOR 0x20
-#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
-
-#define UFSHCD_STATUS_READY (UTP_TRANSFER_REQ_LIST_READY |\
- UTP_TASK_REQ_LIST_READY |\
- UIC_COMMAND_READY)
-
-enum {
- PWR_OK = 0x0,
- PWR_LOCAL = 0x01,
- PWR_REMOTE = 0x02,
- PWR_BUSY = 0x03,
- PWR_ERROR_CAP = 0x04,
- PWR_FATAL_ERROR = 0x05,
-};
-
-/* HCE - Host Controller Enable 34h */
-#define CONTROLLER_ENABLE 0x1
-#define CONTROLLER_DISABLE 0x0
-#define CRYPTO_GENERAL_ENABLE 0x2
-
-/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
-#define UIC_PHY_ADAPTER_LAYER_ERROR 0x80000000
-#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F
-#define UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK 0xF
-#define UIC_PHY_ADAPTER_LAYER_GENERIC_ERROR 0x10
-
-/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
-#define UIC_DATA_LINK_LAYER_ERROR 0x80000000
-#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0xFFFF
-#define UIC_DATA_LINK_LAYER_ERROR_TCX_REP_TIMER_EXP 0x2
-#define UIC_DATA_LINK_LAYER_ERROR_AFCX_REQ_TIMER_EXP 0x4
-#define UIC_DATA_LINK_LAYER_ERROR_FCX_PRO_TIMER_EXP 0x8
-#define UIC_DATA_LINK_LAYER_ERROR_RX_BUF_OF 0x20
-#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000
-#define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED 0x0001
-#define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002
-
-/* UECN - Host UIC Error Code Network Layer 40h */
-#define UIC_NETWORK_LAYER_ERROR 0x80000000
-#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7
-#define UIC_NETWORK_UNSUPPORTED_HEADER_TYPE 0x1
-#define UIC_NETWORK_BAD_DEVICEID_ENC 0x2
-#define UIC_NETWORK_LHDR_TRAP_PACKET_DROPPING 0x4
-
-/* UECT - Host UIC Error Code Transport Layer 44h */
-#define UIC_TRANSPORT_LAYER_ERROR 0x80000000
-#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F
-#define UIC_TRANSPORT_UNSUPPORTED_HEADER_TYPE 0x1
-#define UIC_TRANSPORT_UNKNOWN_CPORTID 0x2
-#define UIC_TRANSPORT_NO_CONNECTION_RX 0x4
-#define UIC_TRANSPORT_CONTROLLED_SEGMENT_DROPPING 0x8
-#define UIC_TRANSPORT_BAD_TC 0x10
-#define UIC_TRANSPORT_E2E_CREDIT_OVERFOW 0x20
-#define UIC_TRANSPORT_SAFETY_VALUE_DROPPING 0x40
-
-/* UECDME - Host UIC Error Code DME 48h */
-#define UIC_DME_ERROR 0x80000000
-#define UIC_DME_ERROR_CODE_MASK 0x1
-
-/* UTRIACR - Interrupt Aggregation control register - 0x4Ch */
-#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF
-#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8)
-#define INT_AGGR_COUNTER_AND_TIMER_RESET 0x10000
-#define INT_AGGR_STATUS_BIT 0x100000
-#define INT_AGGR_PARAM_WRITE 0x1000000
-#define INT_AGGR_ENABLE 0x80000000
-
-/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
-#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT 0x1
-
-/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
-#define UTP_TASK_REQ_LIST_RUN_STOP_BIT 0x1
-
-/* UICCMD - UIC Command */
-#define COMMAND_OPCODE_MASK 0xFF
-#define GEN_SELECTOR_INDEX_MASK 0xFFFF
-
-#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16)
-#define RESET_LEVEL 0xFF
-
-#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16)
-#define CONFIG_RESULT_CODE_MASK 0xFF
-#define GENERIC_ERROR_CODE_MASK 0xFF
-
-/* GenSelectorIndex calculation macros for M-PHY attributes */
-#define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane)
-#define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane))
-
-#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
- ((sel) & 0xFFFF))
-#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0)
-#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16)
-#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF)
-
-/* Link Status*/
-enum link_status {
- UFSHCD_LINK_IS_DOWN = 1,
- UFSHCD_LINK_IS_UP = 2,
-};
-
-/* UIC Commands */
-enum uic_cmd_dme {
- UIC_CMD_DME_GET = 0x01,
- UIC_CMD_DME_SET = 0x02,
- UIC_CMD_DME_PEER_GET = 0x03,
- UIC_CMD_DME_PEER_SET = 0x04,
- UIC_CMD_DME_POWERON = 0x10,
- UIC_CMD_DME_POWEROFF = 0x11,
- UIC_CMD_DME_ENABLE = 0x12,
- UIC_CMD_DME_RESET = 0x14,
- UIC_CMD_DME_END_PT_RST = 0x15,
- UIC_CMD_DME_LINK_STARTUP = 0x16,
- UIC_CMD_DME_HIBER_ENTER = 0x17,
- UIC_CMD_DME_HIBER_EXIT = 0x18,
- UIC_CMD_DME_TEST_MODE = 0x1A,
-};
-
-/* UIC Config result code / Generic error code */
-enum {
- UIC_CMD_RESULT_SUCCESS = 0x00,
- UIC_CMD_RESULT_INVALID_ATTR = 0x01,
- UIC_CMD_RESULT_FAILURE = 0x01,
- UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02,
- UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03,
- UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04,
- UIC_CMD_RESULT_BAD_INDEX = 0x05,
- UIC_CMD_RESULT_LOCKED_ATTR = 0x06,
- UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07,
- UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08,
- UIC_CMD_RESULT_BUSY = 0x09,
- UIC_CMD_RESULT_DME_FAILURE = 0x0A,
-};
-
-#define MASK_UIC_COMMAND_RESULT 0xFF
-
-#define INT_AGGR_COUNTER_THLD_VAL(c) (((c) & 0x1F) << 8)
-#define INT_AGGR_TIMEOUT_VAL(t) (((t) & 0xFF) << 0)
-
-/* Interrupt disable masks */
-enum {
- /* Interrupt disable mask for UFSHCI v1.0 */
- INTERRUPT_MASK_ALL_VER_10 = 0x30FFF,
- INTERRUPT_MASK_RW_VER_10 = 0x30000,
-
- /* Interrupt disable mask for UFSHCI v1.1 */
- INTERRUPT_MASK_ALL_VER_11 = 0x31FFF,
-
- /* Interrupt disable mask for UFSHCI v2.1 */
- INTERRUPT_MASK_ALL_VER_21 = 0x71FFF,
-};
-
-/* CCAP - Crypto Capability 100h */
-union ufs_crypto_capabilities {
- __le32 reg_val;
- struct {
- u8 num_crypto_cap;
- u8 config_count;
- u8 reserved;
- u8 config_array_ptr;
- };
-};
-
-enum ufs_crypto_key_size {
- UFS_CRYPTO_KEY_SIZE_INVALID = 0x0,
- UFS_CRYPTO_KEY_SIZE_128 = 0x1,
- UFS_CRYPTO_KEY_SIZE_192 = 0x2,
- UFS_CRYPTO_KEY_SIZE_256 = 0x3,
- UFS_CRYPTO_KEY_SIZE_512 = 0x4,
-};
-
-enum ufs_crypto_alg {
- UFS_CRYPTO_ALG_AES_XTS = 0x0,
- UFS_CRYPTO_ALG_BITLOCKER_AES_CBC = 0x1,
- UFS_CRYPTO_ALG_AES_ECB = 0x2,
- UFS_CRYPTO_ALG_ESSIV_AES_CBC = 0x3,
-};
-
-/* x-CRYPTOCAP - Crypto Capability X */
-union ufs_crypto_cap_entry {
- __le32 reg_val;
- struct {
- u8 algorithm_id;
- u8 sdus_mask; /* Supported data unit size mask */
- u8 key_size;
- u8 reserved;
- };
-};
-
-#define UFS_CRYPTO_CONFIGURATION_ENABLE (1 << 7)
-#define UFS_CRYPTO_KEY_MAX_SIZE 64
-/* x-CRYPTOCFG - Crypto Configuration X */
-union ufs_crypto_cfg_entry {
- __le32 reg_val[32];
- struct {
- u8 crypto_key[UFS_CRYPTO_KEY_MAX_SIZE];
- u8 data_unit_size;
- u8 crypto_cap_idx;
- u8 reserved_1;
- u8 config_enable;
- u8 reserved_multi_host;
- u8 reserved_2;
- u8 vsb[2];
- u8 reserved_3[56];
- };
-};
-
-/*
- * Request Descriptor Definitions
- */
-
-/* Transfer request command type */
-enum {
- UTP_CMD_TYPE_SCSI = 0x0,
- UTP_CMD_TYPE_UFS = 0x1,
- UTP_CMD_TYPE_DEV_MANAGE = 0x2,
-};
-
-/* To accommodate UFS2.0 required Command type */
-enum {
- UTP_CMD_TYPE_UFS_STORAGE = 0x1,
-};
-
-enum {
- UTP_SCSI_COMMAND = 0x00000000,
- UTP_NATIVE_UFS_COMMAND = 0x10000000,
- UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000,
- UTP_REQ_DESC_INT_CMD = 0x01000000,
- UTP_REQ_DESC_CRYPTO_ENABLE_CMD = 0x00800000,
-};
-
-/* UTP Transfer Request Data Direction (DD) */
-enum {
- UTP_NO_DATA_TRANSFER = 0x00000000,
- UTP_HOST_TO_DEVICE = 0x02000000,
- UTP_DEVICE_TO_HOST = 0x04000000,
-};
-
-/* Overall command status values */
-enum utp_ocs {
- OCS_SUCCESS = 0x0,
- OCS_INVALID_CMD_TABLE_ATTR = 0x1,
- OCS_INVALID_PRDT_ATTR = 0x2,
- OCS_MISMATCH_DATA_BUF_SIZE = 0x3,
- OCS_MISMATCH_RESP_UPIU_SIZE = 0x4,
- OCS_PEER_COMM_FAILURE = 0x5,
- OCS_ABORTED = 0x6,
- OCS_FATAL_ERROR = 0x7,
- OCS_DEVICE_FATAL_ERROR = 0x8,
- OCS_INVALID_CRYPTO_CONFIG = 0x9,
- OCS_GENERAL_CRYPTO_ERROR = 0xA,
- OCS_INVALID_COMMAND_STATUS = 0x0F,
-};
-
-enum {
- MASK_OCS = 0x0F,
-};
-
-/* The maximum length of the data byte count field in the PRDT is 256KB */
-#define PRDT_DATA_BYTE_COUNT_MAX (256 * 1024)
-/* The granularity of the data byte count field in the PRDT is 32-bit */
-#define PRDT_DATA_BYTE_COUNT_PAD 4
-
-/**
- * struct ufshcd_sg_entry - UFSHCI PRD Entry
- * @addr: Physical address; DW-0 and DW-1.
- * @reserved: Reserved for future use DW-2
- * @size: size of physical segment DW-3
- */
-struct ufshcd_sg_entry {
- __le64 addr;
- __le32 reserved;
- __le32 size;
-};
-
-/**
- * struct utp_transfer_cmd_desc - UTP Command Descriptor (UCD)
- * @command_upiu: Command UPIU Frame address
- * @response_upiu: Response UPIU Frame address
- * @prd_table: Physical Region Descriptor
- */
-struct utp_transfer_cmd_desc {
- u8 command_upiu[ALIGNED_UPIU_SIZE];
- u8 response_upiu[ALIGNED_UPIU_SIZE];
- struct ufshcd_sg_entry prd_table[SG_ALL];
-};
-
-/**
- * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
- * @dword0: Descriptor Header DW0
- * @dword1: Descriptor Header DW1
- * @dword2: Descriptor Header DW2
- * @dword3: Descriptor Header DW3
- */
-struct request_desc_header {
- __le32 dword_0;
- __le32 dword_1;
- __le32 dword_2;
- __le32 dword_3;
-};
-
-/**
- * struct utp_transfer_req_desc - UTP Transfer Request Descriptor (UTRD)
- * @header: UTRD header DW-0 to DW-3
- * @command_desc_base_addr_lo: UCD base address low DW-4
- * @command_desc_base_addr_hi: UCD base address high DW-5
- * @response_upiu_length: response UPIU length DW-6
- * @response_upiu_offset: response UPIU offset DW-6
- * @prd_table_length: Physical region descriptor length DW-7
- * @prd_table_offset: Physical region descriptor offset DW-7
- */
-struct utp_transfer_req_desc {
-
- /* DW 0-3 */
- struct request_desc_header header;
-
- /* DW 4-5*/
- __le32 command_desc_base_addr_lo;
- __le32 command_desc_base_addr_hi;
-
- /* DW 6 */
- __le16 response_upiu_length;
- __le16 response_upiu_offset;
-
- /* DW 7 */
- __le16 prd_table_length;
- __le16 prd_table_offset;
-};
-
-/*
- * UTMRD structure.
- */
-struct utp_task_req_desc {
- /* DW 0-3 */
- struct request_desc_header header;
-
- /* DW 4-11 - Task request UPIU structure */
- struct {
- struct utp_upiu_header req_header;
- __be32 input_param1;
- __be32 input_param2;
- __be32 input_param3;
- __be32 __reserved1[2];
- } upiu_req;
-
- /* DW 12-19 - Task Management Response UPIU structure */
- struct {
- struct utp_upiu_header rsp_header;
- __be32 output_param1;
- __be32 output_param2;
- __be32 __reserved2[3];
- } upiu_rsp;
-};
-
-#endif /* End of Header */
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
deleted file mode 100644
index 0521f887e3ac..000000000000
--- a/drivers/scsi/ufs/unipro.h
+++ /dev/null
@@ -1,316 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2013 Samsung Electronics Co., Ltd.
- */
-
-#ifndef _UNIPRO_H_
-#define _UNIPRO_H_
-
-/*
- * M-TX Configuration Attributes
- */
-#define TX_HIBERN8TIME_CAPABILITY 0x000F
-#define TX_MODE 0x0021
-#define TX_HSRATE_SERIES 0x0022
-#define TX_HSGEAR 0x0023
-#define TX_PWMGEAR 0x0024
-#define TX_AMPLITUDE 0x0025
-#define TX_HS_SLEWRATE 0x0026
-#define TX_SYNC_SOURCE 0x0027
-#define TX_HS_SYNC_LENGTH 0x0028
-#define TX_HS_PREPARE_LENGTH 0x0029
-#define TX_LS_PREPARE_LENGTH 0x002A
-#define TX_HIBERN8_CONTROL 0x002B
-#define TX_LCC_ENABLE 0x002C
-#define TX_PWM_BURST_CLOSURE_EXTENSION 0x002D
-#define TX_BYPASS_8B10B_ENABLE 0x002E
-#define TX_DRIVER_POLARITY 0x002F
-#define TX_HS_UNTERMINATED_LINE_DRIVE_ENABLE 0x0030
-#define TX_LS_TERMINATED_LINE_DRIVE_ENABLE 0x0031
-#define TX_LCC_SEQUENCER 0x0032
-#define TX_MIN_ACTIVATETIME 0x0033
-#define TX_PWM_G6_G7_SYNC_LENGTH 0x0034
-#define TX_REFCLKFREQ 0x00EB
-#define TX_CFGCLKFREQVAL 0x00EC
-#define CFGEXTRATTR 0x00F0
-#define DITHERCTRL2 0x00F1
-
-/*
- * M-RX Configuration Attributes
- */
-#define RX_MODE 0x00A1
-#define RX_HSRATE_SERIES 0x00A2
-#define RX_HSGEAR 0x00A3
-#define RX_PWMGEAR 0x00A4
-#define RX_LS_TERMINATED_ENABLE 0x00A5
-#define RX_HS_UNTERMINATED_ENABLE 0x00A6
-#define RX_ENTER_HIBERN8 0x00A7
-#define RX_BYPASS_8B10B_ENABLE 0x00A8
-#define RX_TERMINATION_FORCE_ENABLE 0x00A9
-#define RX_MIN_ACTIVATETIME_CAPABILITY 0x008F
-#define RX_HIBERN8TIME_CAPABILITY 0x0092
-#define RX_REFCLKFREQ 0x00EB
-#define RX_CFGCLKFREQVAL 0x00EC
-#define CFGWIDEINLN 0x00F0
-#define CFGRXCDR8 0x00BA
-#define ENARXDIRECTCFG4 0x00F2
-#define CFGRXOVR8 0x00BD
-#define RXDIRECTCTRL2 0x00C7
-#define ENARXDIRECTCFG3 0x00F3
-#define RXCALCTRL 0x00B4
-#define ENARXDIRECTCFG2 0x00F4
-#define CFGRXOVR4 0x00E9
-#define RXSQCTRL 0x00B5
-#define CFGRXOVR6 0x00BF
-#define RX_HS_G1_SYNC_LENGTH_CAP 0x008B
-#define RX_HS_G1_PREP_LENGTH_CAP 0x008C
-#define RX_HS_G2_SYNC_LENGTH_CAP 0x0094
-#define RX_HS_G3_SYNC_LENGTH_CAP 0x0095
-#define RX_HS_G2_PREP_LENGTH_CAP 0x0096
-#define RX_HS_G3_PREP_LENGTH_CAP 0x0097
-#define RX_ADV_GRANULARITY_CAP 0x0098
-#define RX_MIN_ACTIVATETIME_CAP 0x008F
-#define RX_HIBERN8TIME_CAP 0x0092
-#define RX_ADV_HIBERN8TIME_CAP 0x0099
-#define RX_ADV_MIN_ACTIVATETIME_CAP 0x009A
-
-
-#define is_mphy_tx_attr(attr) (attr < RX_MODE)
-#define RX_ADV_FINE_GRAN_STEP(x) ((((x) & 0x3) << 1) | 0x1)
-#define SYNC_LEN_FINE(x) ((x) & 0x3F)
-#define SYNC_LEN_COARSE(x) ((1 << 6) | ((x) & 0x3F))
-#define PREP_LEN(x) ((x) & 0xF)
-
-#define RX_MIN_ACTIVATETIME_UNIT_US 100
-#define HIBERN8TIME_UNIT_US 100
-
-/*
- * Common Block Attributes
- */
-#define TX_GLOBALHIBERNATE UNIPRO_CB_OFFSET(0x002B)
-#define REFCLKMODE UNIPRO_CB_OFFSET(0x00BF)
-#define DIRECTCTRL19 UNIPRO_CB_OFFSET(0x00CD)
-#define DIRECTCTRL10 UNIPRO_CB_OFFSET(0x00E6)
-#define CDIRECTCTRL6 UNIPRO_CB_OFFSET(0x00EA)
-#define RTOBSERVESELECT UNIPRO_CB_OFFSET(0x00F0)
-#define CBDIVFACTOR UNIPRO_CB_OFFSET(0x00F1)
-#define CBDCOCTRL5 UNIPRO_CB_OFFSET(0x00F3)
-#define CBPRGPLL2 UNIPRO_CB_OFFSET(0x00F8)
-#define CBPRGTUNING UNIPRO_CB_OFFSET(0x00FB)
-
-#define UNIPRO_CB_OFFSET(x) (0x8000 | x)
-
-/*
- * PHY Adapter attributes
- */
-#define PA_ACTIVETXDATALANES 0x1560
-#define PA_ACTIVERXDATALANES 0x1580
-#define PA_TXTRAILINGCLOCKS 0x1564
-#define PA_PHY_TYPE 0x1500
-#define PA_AVAILTXDATALANES 0x1520
-#define PA_AVAILRXDATALANES 0x1540
-#define PA_MINRXTRAILINGCLOCKS 0x1543
-#define PA_TXPWRSTATUS 0x1567
-#define PA_RXPWRSTATUS 0x1582
-#define PA_TXFORCECLOCK 0x1562
-#define PA_TXPWRMODE 0x1563
-#define PA_LEGACYDPHYESCDL 0x1570
-#define PA_MAXTXSPEEDFAST 0x1521
-#define PA_MAXTXSPEEDSLOW 0x1522
-#define PA_MAXRXSPEEDFAST 0x1541
-#define PA_MAXRXSPEEDSLOW 0x1542
-#define PA_TXLINKSTARTUPHS 0x1544
-#define PA_LOCAL_TX_LCC_ENABLE 0x155E
-#define PA_TXSPEEDFAST 0x1565
-#define PA_TXSPEEDSLOW 0x1566
-#define PA_REMOTEVERINFO 0x15A0
-#define PA_TXGEAR 0x1568
-#define PA_TXTERMINATION 0x1569
-#define PA_HSSERIES 0x156A
-#define PA_PWRMODE 0x1571
-#define PA_RXGEAR 0x1583
-#define PA_RXTERMINATION 0x1584
-#define PA_MAXRXPWMGEAR 0x1586
-#define PA_MAXRXHSGEAR 0x1587
-#define PA_RXHSUNTERMCAP 0x15A5
-#define PA_RXLSTERMCAP 0x15A6
-#define PA_GRANULARITY 0x15AA
-#define PA_PACPREQTIMEOUT 0x1590
-#define PA_PACPREQEOBTIMEOUT 0x1591
-#define PA_HIBERN8TIME 0x15A7
-#define PA_LOCALVERINFO 0x15A9
-#define PA_GRANULARITY 0x15AA
-#define PA_TACTIVATE 0x15A8
-#define PA_PACPFRAMECOUNT 0x15C0
-#define PA_PACPERRORCOUNT 0x15C1
-#define PA_PHYTESTCONTROL 0x15C2
-#define PA_PWRMODEUSERDATA0 0x15B0
-#define PA_PWRMODEUSERDATA1 0x15B1
-#define PA_PWRMODEUSERDATA2 0x15B2
-#define PA_PWRMODEUSERDATA3 0x15B3
-#define PA_PWRMODEUSERDATA4 0x15B4
-#define PA_PWRMODEUSERDATA5 0x15B5
-#define PA_PWRMODEUSERDATA6 0x15B6
-#define PA_PWRMODEUSERDATA7 0x15B7
-#define PA_PWRMODEUSERDATA8 0x15B8
-#define PA_PWRMODEUSERDATA9 0x15B9
-#define PA_PWRMODEUSERDATA10 0x15BA
-#define PA_PWRMODEUSERDATA11 0x15BB
-#define PA_CONNECTEDTXDATALANES 0x1561
-#define PA_CONNECTEDRXDATALANES 0x1581
-#define PA_LOGICALLANEMAP 0x15A1
-#define PA_SLEEPNOCONFIGTIME 0x15A2
-#define PA_STALLNOCONFIGTIME 0x15A3
-#define PA_SAVECONFIGTIME 0x15A4
-#define PA_TXHSADAPTTYPE 0x15D4
-
-/* Adpat type for PA_TXHSADAPTTYPE attribute */
-#define PA_REFRESH_ADAPT 0x00
-#define PA_INITIAL_ADAPT 0x01
-#define PA_NO_ADAPT 0x03
-
-#define PA_TACTIVATE_TIME_UNIT_US 10
-#define PA_HIBERN8_TIME_UNIT_US 100
-
-/*Other attributes*/
-#define VS_MPHYCFGUPDT 0xD085
-#define VS_DEBUGOMC 0xD09E
-#define VS_POWERSTATE 0xD083
-
-#define PA_GRANULARITY_MIN_VAL 1
-#define PA_GRANULARITY_MAX_VAL 6
-
-/* PHY Adapter Protocol Constants */
-#define PA_MAXDATALANES 4
-
-#define DL_FC0ProtectionTimeOutVal_Default 8191
-#define DL_TC0ReplayTimeOutVal_Default 65535
-#define DL_AFC0ReqTimeOutVal_Default 32767
-#define DL_FC1ProtectionTimeOutVal_Default 8191
-#define DL_TC1ReplayTimeOutVal_Default 65535
-#define DL_AFC1ReqTimeOutVal_Default 32767
-
-#define DME_LocalFC0ProtectionTimeOutVal 0xD041
-#define DME_LocalTC0ReplayTimeOutVal 0xD042
-#define DME_LocalAFC0ReqTimeOutVal 0xD043
-
-/* PA power modes */
-enum {
- FAST_MODE = 1,
- SLOW_MODE = 2,
- FASTAUTO_MODE = 4,
- SLOWAUTO_MODE = 5,
- UNCHANGED = 7,
-};
-
-#define PWRMODE_MASK 0xF
-#define PWRMODE_RX_OFFSET 4
-
-/* PA TX/RX Frequency Series */
-enum {
- PA_HS_MODE_A = 1,
- PA_HS_MODE_B = 2,
-};
-
-enum ufs_pwm_gear_tag {
- UFS_PWM_DONT_CHANGE, /* Don't change Gear */
- UFS_PWM_G1, /* PWM Gear 1 (default for reset) */
- UFS_PWM_G2, /* PWM Gear 2 */
- UFS_PWM_G3, /* PWM Gear 3 */
- UFS_PWM_G4, /* PWM Gear 4 */
- UFS_PWM_G5, /* PWM Gear 5 */
- UFS_PWM_G6, /* PWM Gear 6 */
- UFS_PWM_G7, /* PWM Gear 7 */
-};
-
-enum ufs_hs_gear_tag {
- UFS_HS_DONT_CHANGE, /* Don't change Gear */
- UFS_HS_G1, /* HS Gear 1 (default for reset) */
- UFS_HS_G2, /* HS Gear 2 */
- UFS_HS_G3, /* HS Gear 3 */
- UFS_HS_G4, /* HS Gear 4 */
-};
-
-enum ufs_unipro_ver {
- UFS_UNIPRO_VER_RESERVED = 0,
- UFS_UNIPRO_VER_1_40 = 1, /* UniPro version 1.40 */
- UFS_UNIPRO_VER_1_41 = 2, /* UniPro version 1.41 */
- UFS_UNIPRO_VER_1_6 = 3, /* UniPro version 1.6 */
- UFS_UNIPRO_VER_1_61 = 4, /* UniPro version 1.61 */
- UFS_UNIPRO_VER_1_8 = 5, /* UniPro version 1.8 */
- UFS_UNIPRO_VER_MAX = 6, /* UniPro unsupported version */
- /* UniPro version field mask in PA_LOCALVERINFO */
- UFS_UNIPRO_VER_MASK = 0xF,
-};
-
-/*
- * Data Link Layer Attributes
- */
-#define DL_TC0TXFCTHRESHOLD 0x2040
-#define DL_FC0PROTTIMEOUTVAL 0x2041
-#define DL_TC0REPLAYTIMEOUTVAL 0x2042
-#define DL_AFC0REQTIMEOUTVAL 0x2043
-#define DL_AFC0CREDITTHRESHOLD 0x2044
-#define DL_TC0OUTACKTHRESHOLD 0x2045
-#define DL_TC1TXFCTHRESHOLD 0x2060
-#define DL_FC1PROTTIMEOUTVAL 0x2061
-#define DL_TC1REPLAYTIMEOUTVAL 0x2062
-#define DL_AFC1REQTIMEOUTVAL 0x2063
-#define DL_AFC1CREDITTHRESHOLD 0x2064
-#define DL_TC1OUTACKTHRESHOLD 0x2065
-#define DL_TXPREEMPTIONCAP 0x2000
-#define DL_TC0TXMAXSDUSIZE 0x2001
-#define DL_TC0RXINITCREDITVAL 0x2002
-#define DL_TC0TXBUFFERSIZE 0x2005
-#define DL_PEERTC0PRESENT 0x2046
-#define DL_PEERTC0RXINITCREVAL 0x2047
-#define DL_TC1TXMAXSDUSIZE 0x2003
-#define DL_TC1RXINITCREDITVAL 0x2004
-#define DL_TC1TXBUFFERSIZE 0x2006
-#define DL_PEERTC1PRESENT 0x2066
-#define DL_PEERTC1RXINITCREVAL 0x2067
-
-/*
- * Network Layer Attributes
- */
-#define N_DEVICEID 0x3000
-#define N_DEVICEID_VALID 0x3001
-#define N_TC0TXMAXSDUSIZE 0x3020
-#define N_TC1TXMAXSDUSIZE 0x3021
-
-/*
- * Transport Layer Attributes
- */
-#define T_NUMCPORTS 0x4000
-#define T_NUMTESTFEATURES 0x4001
-#define T_CONNECTIONSTATE 0x4020
-#define T_PEERDEVICEID 0x4021
-#define T_PEERCPORTID 0x4022
-#define T_TRAFFICCLASS 0x4023
-#define T_PROTOCOLID 0x4024
-#define T_CPORTFLAGS 0x4025
-#define T_TXTOKENVALUE 0x4026
-#define T_RXTOKENVALUE 0x4027
-#define T_LOCALBUFFERSPACE 0x4028
-#define T_PEERBUFFERSPACE 0x4029
-#define T_CREDITSTOSEND 0x402A
-#define T_CPORTMODE 0x402B
-#define T_TC0TXMAXSDUSIZE 0x4060
-#define T_TC1TXMAXSDUSIZE 0x4061
-
-/* CPort setting */
-#define E2EFC_ON (1 << 0)
-#define E2EFC_OFF (0 << 0)
-#define CSD_N_ON (0 << 1)
-#define CSD_N_OFF (1 << 1)
-#define CSV_N_ON (0 << 2)
-#define CSV_N_OFF (1 << 2)
-#define CPORT_DEF_FLAGS (CSV_N_OFF | CSD_N_OFF | E2EFC_OFF)
-
-/* CPort connection state */
-enum {
- CPORT_IDLE = 0,
- CPORT_CONNECTED,
-};
-
-#endif /* _UNIPRO_H_ */
diff --git a/drivers/ufs/Kconfig b/drivers/ufs/Kconfig
new file mode 100644
index 000000000000..90226f72c158
--- /dev/null
+++ b/drivers/ufs/Kconfig
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# UFS subsystem configuration
+#
+
+menuconfig SCSI_UFSHCD
+ tristate "Universal Flash Storage Controller"
+ depends on SCSI && SCSI_DMA
+ select PM_DEVFREQ
+ select DEVFREQ_GOV_SIMPLE_ONDEMAND
+ select NLS
+ help
+ Enables support for UFS (Universal Flash Storage) host controllers.
+ A UFS host controller is an electronic component that is able to
+ communicate with a UFS card. UFS host controllers occur in
+ smartphones, laptops, digital cameras and also in cars.
+ The kernel module will be called ufshcd.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/ufs.rst>.
+ However, do not compile this as a module if your root file system
+ (the one containing the directory /) is located on a UFS device.
+
+if SCSI_UFSHCD
+
+source "drivers/ufs/core/Kconfig"
+
+source "drivers/ufs/host/Kconfig"
+
+endif
diff --git a/drivers/ufs/Makefile b/drivers/ufs/Makefile
new file mode 100644
index 000000000000..5a199ef18d4c
--- /dev/null
+++ b/drivers/ufs/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# The link order is important here. ufshcd-core must initialize
+# before vendor drivers.
+obj-$(CONFIG_SCSI_UFSHCD) += core/ host/
diff --git a/drivers/ufs/core/Kconfig b/drivers/ufs/core/Kconfig
new file mode 100644
index 000000000000..e11978171403
--- /dev/null
+++ b/drivers/ufs/core/Kconfig
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Kernel configuration file for the UFS Host Controller core.
+#
+# Copyright (C) 2011-2013 Samsung India Software Operations
+#
+# Authors:
+# Santosh Yaraganavi <santosh.sy@samsung.com>
+# Vinayak Holikatti <h.vinayak@samsung.com>
+
+config SCSI_UFS_BSG
+ bool "Universal Flash Storage BSG device node"
+ select BLK_DEV_BSGLIB
+ help
+ Universal Flash Storage (UFS) is SCSI transport specification for
+ accessing flash storage on digital cameras, mobile phones and
+ consumer electronic devices.
+ A UFS controller communicates with a UFS device by exchanging
+ UFS Protocol Information Units (UPIUs).
+ UPIUs can not only be used as a transport layer for the SCSI protocol
+ but are also used by the UFS native command set.
+ This transport driver supports exchanging UFS protocol information units
+ with a UFS device. See also the ufshcd driver, which is a SCSI driver
+ that supports UFS devices.
+
+ Select this if you need a bsg device node for your UFS controller.
+ If unsure, say N.
+
+config SCSI_UFS_CRYPTO
+ bool "UFS Crypto Engine Support"
+ depends on BLK_INLINE_ENCRYPTION
+ help
+ Enable Crypto Engine Support in UFS.
+ Enabling this makes it possible for the kernel to use the crypto
+ capabilities of the UFS device (if present) to perform crypto
+ operations on data being transferred to/from the device.
+
+config SCSI_UFS_HPB
+ bool "Support UFS Host Performance Booster"
+ help
+ The UFS HPB feature improves random read performance. It caches
+ L2P (logical to physical) map of UFS to host DRAM. The driver uses HPB
+ read command by piggybacking physical page number for bypassing FTL (flash
+ translation layer)'s L2P address translation.
+
+config SCSI_UFS_FAULT_INJECTION
+ bool "UFS Fault Injection Support"
+ depends on FAULT_INJECTION
+ help
+ Enable fault injection support in the UFS driver. This makes it easier
+ to test the UFS error handler and abort handler.
+
+config SCSI_UFS_HWMON
+ bool "UFS Temperature Notification"
+ depends on SCSI_UFSHCD=HWMON || HWMON=y
+ help
+ This provides support for UFS hardware monitoring. If enabled,
+ a hardware monitoring device will be created for the UFS device.
+
+ If unsure, say N.
diff --git a/drivers/ufs/core/Makefile b/drivers/ufs/core/Makefile
new file mode 100644
index 000000000000..62f38c5bf857
--- /dev/null
+++ b/drivers/ufs/core/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
+ufshcd-core-y += ufshcd.o ufs-sysfs.o
+ufshcd-core-$(CONFIG_DEBUG_FS) += ufs-debugfs.o
+ufshcd-core-$(CONFIG_SCSI_UFS_BSG) += ufs_bsg.o
+ufshcd-core-$(CONFIG_SCSI_UFS_CRYPTO) += ufshcd-crypto.o
+ufshcd-core-$(CONFIG_SCSI_UFS_HPB) += ufshpb.o
+ufshcd-core-$(CONFIG_SCSI_UFS_FAULT_INJECTION) += ufs-fault-injection.o
+ufshcd-core-$(CONFIG_SCSI_UFS_HWMON) += ufs-hwmon.o
diff --git a/drivers/scsi/ufs/ufs-debugfs.c b/drivers/ufs/core/ufs-debugfs.c
index c10a8f09682b..e3baed6c70bd 100644
--- a/drivers/scsi/ufs/ufs-debugfs.c
+++ b/drivers/ufs/core/ufs-debugfs.c
@@ -4,7 +4,7 @@
#include <linux/debugfs.h>
#include "ufs-debugfs.h"
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#include "ufshcd-priv.h"
static struct dentry *ufs_debugfs_root;
diff --git a/drivers/scsi/ufs/ufs-debugfs.h b/drivers/ufs/core/ufs-debugfs.h
index 97548a3f90eb..97548a3f90eb 100644
--- a/drivers/scsi/ufs/ufs-debugfs.h
+++ b/drivers/ufs/core/ufs-debugfs.h
diff --git a/drivers/scsi/ufs/ufs-fault-injection.c b/drivers/ufs/core/ufs-fault-injection.c
index 7ac7c4e7ff83..7ac7c4e7ff83 100644
--- a/drivers/scsi/ufs/ufs-fault-injection.c
+++ b/drivers/ufs/core/ufs-fault-injection.c
diff --git a/drivers/scsi/ufs/ufs-fault-injection.h b/drivers/ufs/core/ufs-fault-injection.h
index 6d0cd8e10c87..6d0cd8e10c87 100644
--- a/drivers/scsi/ufs/ufs-fault-injection.h
+++ b/drivers/ufs/core/ufs-fault-injection.h
diff --git a/drivers/scsi/ufs/ufs-hwmon.c b/drivers/ufs/core/ufs-hwmon.c
index c38d9d98a86d..4c6a872b7a7c 100644
--- a/drivers/scsi/ufs/ufs-hwmon.c
+++ b/drivers/ufs/core/ufs-hwmon.c
@@ -7,7 +7,7 @@
#include <linux/hwmon.h>
#include <linux/units.h>
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#include "ufshcd-priv.h"
struct ufs_hwmon_data {
diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/ufs/core/ufs-sysfs.c
index 8a3c6442f291..0a088b47d557 100644
--- a/drivers/scsi/ufs/ufs-sysfs.c
+++ b/drivers/ufs/core/ufs-sysfs.c
@@ -6,7 +6,7 @@
#include <linux/bitfield.h>
#include <asm/unaligned.h>
-#include "ufs.h"
+#include <ufs/ufs.h>
#include "ufs-sysfs.h"
#include "ufshcd-priv.h"
diff --git a/drivers/scsi/ufs/ufs-sysfs.h b/drivers/ufs/core/ufs-sysfs.h
index 8d94af3b8077..8d94af3b8077 100644
--- a/drivers/scsi/ufs/ufs-sysfs.h
+++ b/drivers/ufs/core/ufs-sysfs.h
diff --git a/drivers/scsi/ufs/ufs_bsg.c b/drivers/ufs/core/ufs_bsg.c
index 9e9b93867cab..b99e3f3dc4ef 100644
--- a/drivers/scsi/ufs/ufs_bsg.c
+++ b/drivers/ufs/core/ufs_bsg.c
@@ -9,7 +9,7 @@
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include "ufs_bsg.h"
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#include "ufshcd-priv.h"
static int ufs_bsg_get_query_desc_size(struct ufs_hba *hba, int *desc_len,
diff --git a/drivers/scsi/ufs/ufs_bsg.h b/drivers/ufs/core/ufs_bsg.h
index 57712d2656d2..57712d2656d2 100644
--- a/drivers/scsi/ufs/ufs_bsg.h
+++ b/drivers/ufs/core/ufs_bsg.h
diff --git a/drivers/scsi/ufs/ufshcd-crypto.c b/drivers/ufs/core/ufshcd-crypto.c
index 67402baf6fae..198360fe5e8e 100644
--- a/drivers/scsi/ufs/ufshcd-crypto.c
+++ b/drivers/ufs/core/ufshcd-crypto.c
@@ -3,7 +3,7 @@
* Copyright 2019 Google LLC
*/
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#include "ufshcd-crypto.h"
/* Blk-crypto modes supported by UFS crypto */
diff --git a/drivers/scsi/ufs/ufshcd-crypto.h b/drivers/ufs/core/ufshcd-crypto.h
index 9f98f18f9646..504cc841540b 100644
--- a/drivers/scsi/ufs/ufshcd-crypto.h
+++ b/drivers/ufs/core/ufshcd-crypto.h
@@ -7,9 +7,9 @@
#define _UFSHCD_CRYPTO_H
#include <scsi/scsi_cmnd.h>
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#include "ufshcd-priv.h"
-#include "ufshci.h"
+#include <ufs/ufshci.h>
#ifdef CONFIG_SCSI_UFS_CRYPTO
diff --git a/drivers/scsi/ufs/ufshcd-priv.h b/drivers/ufs/core/ufshcd-priv.h
index 38bc77d3dbbd..ffb01fc6de75 100644
--- a/drivers/scsi/ufs/ufshcd-priv.h
+++ b/drivers/ufs/core/ufshcd-priv.h
@@ -4,7 +4,7 @@
#define _UFSHCD_PRIV_H_
#include <linux/pm_runtime.h>
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
static inline bool ufshcd_is_user_access_allowed(struct ufs_hba *hba)
{
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 1fb3a8b9b03e..efe67a381c32 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -26,8 +26,8 @@
#include <scsi/scsi_driver.h>
#include <scsi/scsi_eh.h>
#include "ufshcd-priv.h"
-#include "ufs_quirks.h"
-#include "unipro.h"
+#include <ufs/ufs_quirks.h>
+#include <ufs/unipro.h>
#include "ufs-sysfs.h"
#include "ufs-debugfs.h"
#include "ufs-fault-injection.h"
diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/ufs/core/ufshpb.c
index f1f65383e97d..aee0ec4cee70 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/ufs/core/ufshpb.c
@@ -17,7 +17,7 @@
#include "ufshcd-priv.h"
#include "ufshpb.h"
-#include "../sd.h"
+#include "../../scsi/sd.h"
#define ACTIVATION_THRESHOLD 8 /* 8 IOs */
#define READ_TO_MS 1000
diff --git a/drivers/scsi/ufs/ufshpb.h b/drivers/ufs/core/ufshpb.h
index 0d6e6004d783..0d6e6004d783 100644
--- a/drivers/scsi/ufs/ufshpb.h
+++ b/drivers/ufs/core/ufshpb.h
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/ufs/host/Kconfig
index 393b9a01da36..82590224da13 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/ufs/host/Kconfig
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-# Kernel configuration file for the UFS Host Controller
+# Kernel configuration file for the UFS host controller drivers.
#
# Copyright (C) 2011-2013 Samsung India Software Operations
#
@@ -8,26 +8,6 @@
# Santosh Yaraganavi <santosh.sy@samsung.com>
# Vinayak Holikatti <h.vinayak@samsung.com>
-config SCSI_UFSHCD
- tristate "Universal Flash Storage Controller Driver Core"
- depends on SCSI && SCSI_DMA
- select PM_DEVFREQ
- select DEVFREQ_GOV_SIMPLE_ONDEMAND
- select NLS
- help
- This selects the support for UFS devices in Linux, say Y and make
- sure that you know the name of your UFS host adapter (the card
- inside your computer that "speaks" the UFS protocol, also
- called UFS Host Controller), because you will be asked for it.
- The module will be called ufshcd.
-
- To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/ufs.rst>.
- However, do not compile this as a module if your root file system
- (the one containing the directory /) is located on a UFS device.
-
-if SCSI_UFSHCD
-
config SCSI_UFSHCD_PCI
tristate "PCI bus based UFS Controller support"
depends on PCI
@@ -122,24 +102,6 @@ config SCSI_UFS_TI_J721E
Selects this if you have TI platform with UFS controller.
If unsure, say N.
-config SCSI_UFS_BSG
- bool "Universal Flash Storage BSG device node"
- select BLK_DEV_BSGLIB
- help
- Universal Flash Storage (UFS) is SCSI transport specification for
- accessing flash storage on digital cameras, mobile phones and
- consumer electronic devices.
- A UFS controller communicates with a UFS device by exchanging
- UFS Protocol Information Units (UPIUs).
- UPIUs can not only be used as a transport layer for the SCSI protocol
- but are also used by the UFS native command set.
- This transport driver supports exchanging UFS protocol information units
- with a UFS device. See also the ufshcd driver, which is a SCSI driver
- that supports UFS devices.
-
- Select this if you need a bsg device node for your UFS controller.
- If unsure, say N.
-
config SCSI_UFS_EXYNOS
tristate "Exynos specific hooks to UFS controller platform driver"
depends on SCSI_UFSHCD_PLATFORM && (ARCH_EXYNOS || COMPILE_TEST)
@@ -150,38 +112,3 @@ config SCSI_UFS_EXYNOS
Select this if you have UFS host controller on Samsung Exynos SoC.
If unsure, say N.
-
-config SCSI_UFS_CRYPTO
- bool "UFS Crypto Engine Support"
- depends on BLK_INLINE_ENCRYPTION
- help
- Enable Crypto Engine Support in UFS.
- Enabling this makes it possible for the kernel to use the crypto
- capabilities of the UFS device (if present) to perform crypto
- operations on data being transferred to/from the device.
-
-config SCSI_UFS_HPB
- bool "Support UFS Host Performance Booster"
- help
- The UFS HPB feature improves random read performance. It caches
- L2P (logical to physical) map of UFS to host DRAM. The driver uses HPB
- read command by piggybacking physical page number for bypassing FTL (flash
- translation layer)'s L2P address translation.
-
-config SCSI_UFS_FAULT_INJECTION
- bool "UFS Fault Injection Support"
- depends on FAULT_INJECTION
- help
- Enable fault injection support in the UFS driver. This makes it easier
- to test the UFS error handler and abort handler.
-
-config SCSI_UFS_HWMON
- bool "UFS Temperature Notification"
- depends on SCSI_UFSHCD=HWMON || HWMON=y
- help
- This provides support for UFS hardware monitoring. If enabled,
- a hardware monitoring device will be created for the UFS device.
-
- If unsure, say N.
-
-endif
diff --git a/drivers/scsi/ufs/Makefile b/drivers/ufs/host/Makefile
index 966048875b50..e4be54273c98 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/ufs/host/Makefile
@@ -1,16 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-# UFSHCD makefile
-
-# The link order is important here. ufshcd-core must initialize
-# before vendor drivers.
-obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
-ufshcd-core-y += ufshcd.o ufs-sysfs.o
-ufshcd-core-$(CONFIG_DEBUG_FS) += ufs-debugfs.o
-ufshcd-core-$(CONFIG_SCSI_UFS_BSG) += ufs_bsg.o
-ufshcd-core-$(CONFIG_SCSI_UFS_CRYPTO) += ufshcd-crypto.o
-ufshcd-core-$(CONFIG_SCSI_UFS_HPB) += ufshpb.o
-ufshcd-core-$(CONFIG_SCSI_UFS_FAULT_INJECTION) += ufs-fault-injection.o
-ufshcd-core-$(CONFIG_SCSI_UFS_HWMON) += ufs-hwmon.o
obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o ufshcd-dwc.o tc-dwc-g210.o
obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o
diff --git a/drivers/scsi/ufs/cdns-pltfrm.c b/drivers/ufs/host/cdns-pltfrm.c
index e05c0ae64eea..e05c0ae64eea 100644
--- a/drivers/scsi/ufs/cdns-pltfrm.c
+++ b/drivers/ufs/host/cdns-pltfrm.c
diff --git a/drivers/scsi/ufs/tc-dwc-g210-pci.c b/drivers/ufs/host/tc-dwc-g210-pci.c
index e635c211c783..92b8ad4b58fe 100644
--- a/drivers/scsi/ufs/tc-dwc-g210-pci.c
+++ b/drivers/ufs/host/tc-dwc-g210-pci.c
@@ -7,7 +7,7 @@
* Authors: Joao Pinto <jpinto@synopsys.com>
*/
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#include "ufshcd-dwc.h"
#include "tc-dwc-g210.h"
diff --git a/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c b/drivers/ufs/host/tc-dwc-g210-pltfrm.c
index f15a84d0c176..f15a84d0c176 100644
--- a/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
+++ b/drivers/ufs/host/tc-dwc-g210-pltfrm.c
diff --git a/drivers/scsi/ufs/tc-dwc-g210.c b/drivers/ufs/host/tc-dwc-g210.c
index 7ef67c9fc5b8..deb93dbd83a4 100644
--- a/drivers/scsi/ufs/tc-dwc-g210.c
+++ b/drivers/ufs/host/tc-dwc-g210.c
@@ -9,8 +9,8 @@
#include <linux/module.h>
-#include "ufshcd.h"
-#include "unipro.h"
+#include <ufs/ufshcd.h>
+#include <ufs/unipro.h>
#include "ufshcd-dwc.h"
#include "ufshci-dwc.h"
diff --git a/drivers/scsi/ufs/tc-dwc-g210.h b/drivers/ufs/host/tc-dwc-g210.h
index f7154012f5c7..f7154012f5c7 100644
--- a/drivers/scsi/ufs/tc-dwc-g210.h
+++ b/drivers/ufs/host/tc-dwc-g210.h
diff --git a/drivers/scsi/ufs/ti-j721e-ufs.c b/drivers/ufs/host/ti-j721e-ufs.c
index 122d650d0810..122d650d0810 100644
--- a/drivers/scsi/ufs/ti-j721e-ufs.c
+++ b/drivers/ufs/host/ti-j721e-ufs.c
diff --git a/drivers/scsi/ufs/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index ddb2d42605c5..a81d8cbd542f 100644
--- a/drivers/scsi/ufs/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -18,10 +18,10 @@
#include <linux/platform_device.h>
#include <linux/regmap.h>
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#include "ufshcd-pltfrm.h"
-#include "ufshci.h"
-#include "unipro.h"
+#include <ufs/ufshci.h>
+#include <ufs/unipro.h>
#include "ufs-exynos.h"
diff --git a/drivers/scsi/ufs/ufs-exynos.h b/drivers/ufs/host/ufs-exynos.h
index 0b0a3d530ca6..0b0a3d530ca6 100644
--- a/drivers/scsi/ufs/ufs-exynos.h
+++ b/drivers/ufs/host/ufs-exynos.h
diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/ufs/host/ufs-hisi.c
index 7046143063ee..2eed13bc82ca 100644
--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/ufs/host/ufs-hisi.c
@@ -15,12 +15,12 @@
#include <linux/platform_device.h>
#include <linux/reset.h>
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#include "ufshcd-pltfrm.h"
-#include "unipro.h"
+#include <ufs/unipro.h>
#include "ufs-hisi.h"
-#include "ufshci.h"
-#include "ufs_quirks.h"
+#include <ufs/ufshci.h>
+#include <ufs/ufs_quirks.h>
static int ufs_hisi_check_hibern8(struct ufs_hba *hba)
{
diff --git a/drivers/scsi/ufs/ufs-hisi.h b/drivers/ufs/host/ufs-hisi.h
index 5a90c0f4e90c..5a90c0f4e90c 100644
--- a/drivers/scsi/ufs/ufs-hisi.h
+++ b/drivers/ufs/host/ufs-hisi.h
diff --git a/drivers/scsi/ufs/ufs-mediatek-trace.h b/drivers/ufs/host/ufs-mediatek-trace.h
index 895e82ea6ece..7e010848dc99 100644
--- a/drivers/scsi/ufs/ufs-mediatek-trace.h
+++ b/drivers/ufs/host/ufs-mediatek-trace.h
@@ -31,6 +31,6 @@ TRACE_EVENT(ufs_mtk_event,
#undef TRACE_INCLUDE_PATH
#undef TRACE_INCLUDE_FILE
-#define TRACE_INCLUDE_PATH ../../drivers/scsi/ufs/
+#define TRACE_INCLUDE_PATH ../../drivers/ufs/host
#define TRACE_INCLUDE_FILE ufs-mediatek-trace
#include <trace/define_trace.h>
diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c
index 083d6bd4d561..beabc3ccd30b 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/ufs/host/ufs-mediatek.c
@@ -21,10 +21,10 @@
#include <linux/sched/clock.h>
#include <linux/soc/mediatek/mtk_sip_svc.h>
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#include "ufshcd-pltfrm.h"
-#include "ufs_quirks.h"
-#include "unipro.h"
+#include <ufs/ufs_quirks.h>
+#include <ufs/unipro.h>
#include "ufs-mediatek.h"
#define CREATE_TRACE_POINTS
diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/ufs/host/ufs-mediatek.h
index 414dca86c09f..414dca86c09f 100644
--- a/drivers/scsi/ufs/ufs-mediatek.h
+++ b/drivers/ufs/host/ufs-mediatek.h
diff --git a/drivers/scsi/ufs/ufs-qcom-ice.c b/drivers/ufs/host/ufs-qcom-ice.c
index 745e48ec598f..745e48ec598f 100644
--- a/drivers/scsi/ufs/ufs-qcom-ice.c
+++ b/drivers/ufs/host/ufs-qcom-ice.c
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 4dcb232facaa..f10d4668814c 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -15,12 +15,12 @@
#include <linux/reset-controller.h>
#include <linux/devfreq.h>
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#include "ufshcd-pltfrm.h"
-#include "unipro.h"
+#include <ufs/unipro.h>
#include "ufs-qcom.h"
-#include "ufshci.h"
-#include "ufs_quirks.h"
+#include <ufs/ufshci.h>
+#include <ufs/ufs_quirks.h>
#define UFS_QCOM_DEFAULT_DBG_PRINT_EN \
(UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 771bc95d02c7..44466a395bb5 100644
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -7,7 +7,7 @@
#include <linux/reset-controller.h>
#include <linux/reset.h>
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#define MAX_UFS_QCOM_HOSTS 1
#define MAX_U32 (~(u32)0)
diff --git a/drivers/scsi/ufs/ufshcd-dwc.c b/drivers/ufs/host/ufshcd-dwc.c
index a57973c8d2a1..e28a67e1e314 100644
--- a/drivers/scsi/ufs/ufshcd-dwc.c
+++ b/drivers/ufs/host/ufshcd-dwc.c
@@ -9,8 +9,8 @@
#include <linux/module.h>
-#include "ufshcd.h"
-#include "unipro.h"
+#include <ufs/ufshcd.h>
+#include <ufs/unipro.h>
#include "ufshcd-dwc.h"
#include "ufshci-dwc.h"
diff --git a/drivers/scsi/ufs/ufshcd-dwc.h b/drivers/ufs/host/ufshcd-dwc.h
index 43b70794e24f..ad91ea56662c 100644
--- a/drivers/scsi/ufs/ufshcd-dwc.h
+++ b/drivers/ufs/host/ufshcd-dwc.h
@@ -10,7 +10,7 @@
#ifndef _UFSHCD_DWC_H
#define _UFSHCD_DWC_H
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
struct ufshcd_dme_attr_val {
u32 attr_sel;
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/ufs/host/ufshcd-pci.c
index 20af2fbc3af1..04166bda41da 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/ufs/host/ufshcd-pci.c
@@ -9,7 +9,7 @@
* Vinayak Holikatti <h.vinayak@samsung.com>
*/
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/pci.h>
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c
index f5313f407617..e7332cc65b1f 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/ufs/host/ufshcd-pltfrm.c
@@ -13,9 +13,9 @@
#include <linux/pm_runtime.h>
#include <linux/of.h>
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#include "ufshcd-pltfrm.h"
-#include "unipro.h"
+#include <ufs/unipro.h>
#define UFSHCD_DEFAULT_LANES_PER_DIRECTION 2
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.h b/drivers/ufs/host/ufshcd-pltfrm.h
index c33e28ac6ef6..43c2e412bd99 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.h
+++ b/drivers/ufs/host/ufshcd-pltfrm.h
@@ -5,7 +5,7 @@
#ifndef UFSHCD_PLTFRM_H_
#define UFSHCD_PLTFRM_H_
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
#define UFS_PWM_MODE 1
#define UFS_HS_MODE 2
diff --git a/drivers/scsi/ufs/ufshci-dwc.h b/drivers/ufs/host/ufshci-dwc.h
index 6c290e272106..6c290e272106 100644
--- a/drivers/scsi/ufs/ufshci-dwc.h
+++ b/drivers/ufs/host/ufshci-dwc.h