Merge tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.4 cycle

Note includes a merge from i3c tree to get support needed for stm_lsm6dsx driver
support for l3c devices.  Done from immutable branch.

A counter subsystem patche in here as well.

Alongside the new device support (which is always good), Chuhong's work
on using devres managed APIs has cleaned up a number of drivers.

New device support
* adis16460
  - New driver based on ADIS framework which needed addition of support
    for cs_change_delay. Includes device tree binding.
* cros_ec
  - Support fo the veyron-minnie which uses an older interface.
* lsm6dsx
  - Support for LSM6DSTR-C gyro + magnetometer sensor (new IDs mainly)
  - Support for ISM330DHCX acc + gyro sensor (extensive rework needed!)
* Maxim 5432
  - New driver support MAX5432-MAX5435 family of potentiometers.
* noa1305
  - New driver for this ON Semiconductor Ambient light sensor.

Features and cleanups
* tree wide
  - Drop error prints after platform_get_irq as already prints errors
    internally if any occur.
* docs
  - Document mounting matrix.
  - Fix a missing newline at end of file.
* ad2s1210
  - Switch to device managed APIs for all of probe and drop explicit remove.
* ad7192
  - Add of_device_id array to explicity handling DT bindings.
* ad7606
  - Lots of rework leading to support for software configure modes in ad7616
    parts.
  - Debugfs register access support.
* am2315
  - Switch to device managed APIs for all of probe and drop explicit remove.
* apds9960
  - Typo in module description.
* cm36651
  - Convert to i2c_new_dummy_device.
  - Swithc to device managed APIs for all of probe adn drop explicit remove.
* cros_ec
  - Calibscale support for accel, gyro and magnetometer.
  - Tidy up some error codes to return the error from the stack rather than
    -EIO.
  - Determine protocol version.
  - Add a sign vector to the core to fix sensor rotation if necessary.
    Cannot just be done with mount matrix as already in use in many devices.
  - Tidy up INFO_SCALE being in both the separate and shared lists.
  - Drop a lot of dplicate code from the cros-ec-accel-legacy driver
    and use the core provided code instead.
  - Make frequency range available to userspace.
* counter / ftm-quaddec
  - Switch to device managed APIs for all of probe adn drop explicit remove.
* hdc100x
  - Switch to device managed APIs for all of probe and drop explicit remove.
* hi8435
  - Use gpiod_set_value_cansleep as we don't care here and there is a
    board out there where it needs to sleep.
  - Switch to device managed APIs for all of probe and drop explict remove.
* hp03
  - Convert to i2c_new_dummy_device.
* maxim thermocouple
  - Switch to device managed APIs for all of probe and drop explicit remove.
* mmc35240
  - Fix typo in constant naming.
* mpu6050
  - Use devm_add_action_or_reset in place of explicit error handling.
  - Make text in Kconfig more explicit about which parts are supported.
* mxc4005
  - Switch to device managed APIs for all of probe and drop explicit remove.
* pms7003
  - Convert device tree bindings to yaml.
  - Add a MAINTAINERS entry
* sc27xx
  - Introduce a local struct device *dev pointer to avoid lots of deref.
  - Use devm_add_action_or_reset in place of explicit error handling.
* sca3000
  - Typo fix in naming.
* si1145
  - Switch to device managed APIs for all of probe and drop explicit remove.
* st_sensors
  - Lots of rework to enable switch to regmap.
  - Regmap conversion at the end.
  - Tidy up some inconsistencies in buffer setup ops.
  - Tidy up an oddity by dropping get_irq_data_ready function in favour
    of direct access.
  - Stop allocating buffer in buffer enable in favour of just embedding
    a large enough constant size buffer in the iio_priv accessed structure.
* st_lsm6dsx
  - l3c device support (LSM6DSO and LSM6DSR)
  - tidy up irq return logic which was strangely written.
  - fix up an ABI quirk where this driver used separate scale
    attributes, even though they were always shared by type.
* stk33xx
  - Device tree bindings include manufacturer ID.
* stm32-adc
  - Add control for supply to analog switches including DT bindings.
* stm32 timer
  - Drop the quadrature mode support.  Believed there were no users so
    take this opportunity to drop this unwanted ABI.
* tsl2772
  - Switch to device mangage APIs for all of probe and drop explicit remove.
  - Use regulator_bulk_* APIs to reduce repitition.
* veml6070
  - Convert to i2c_new_dummy_device.

* tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (84 commits)
  iio: hi8435: Drop hi8435_remove() by using devres for remaining elements
  iio: hi8435: Use gpiod_set_value_cansleep()
  iio:st_sensors: remove buffer allocation at each buffer enable
  iio: imu: inv_mpu6050: be more explicit on supported chips
  iio: light: noa1305: Add support for NOA1305
  dt-bindings: Add binding document for NOA1305
  iio: remove get_irq_data_ready() function pointer and use IRQ number directly
  iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type
  iio: tsl2772: Use regulator_bulk_() APIs
  iio: tsl2772: Use devm_iio_device_register
  iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
  iio: tsl2772: Use devm_add_action_or_reset
  iio: Remove dev_err() usage after platform_get_irq()
  iio: light: si1145: Use device-managed APIs
  iio:pressure: preenable/postenable/predisable fixup for ST press buffer
  iio:magn: preenable/postenable/predisable fixup for ST magn buffer
  iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer
  iio:accel: preenable/postenable/predisable fixup for ST accel buffer
  dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings
  iio: imu: st_lsm6dsx: add support to ISM330DHCX
  ...

95 files changed, 2931 insertions, 1414 deletions

diff --git a/drivers/counter/ftm-quaddec.c b/drivers/counter/ftm-quaddec.c
index 68a9b7393457..4046aa9f9234 100644
--- a/drivers/counter/ftm-quaddec.c
+++ b/drivers/counter/ftm-quaddec.c
@@ -100,16 +100,18 @@ static void ftm_quaddec_init(struct ftm_quaddec *ftm)
 	ftm_set_write_protection(ftm);
 }
 
-static void ftm_quaddec_disable(struct ftm_quaddec *ftm)
+static void ftm_quaddec_disable(void *ftm)
 {
-	ftm_clear_write_protection(ftm);
-	ftm_write(ftm, FTM_MODE, 0);
-	ftm_write(ftm, FTM_QDCTRL, 0);
+	struct ftm_quaddec *ftm_qua = ftm;
+
+	ftm_clear_write_protection(ftm_qua);
+	ftm_write(ftm_qua, FTM_MODE, 0);
+	ftm_write(ftm_qua, FTM_QDCTRL, 0);
 	/*
 	 * This is enough to disable the counter. No clock has been
 	 * selected by writing to FTM_SC in init()
 	 */
-	ftm_set_write_protection(ftm);
+	ftm_set_write_protection(ftm_qua);
 }
 
 static int ftm_quaddec_get_prescaler(struct counter_device *counter,
@@ -317,20 +319,13 @@ static int ftm_quaddec_probe(struct platform_device *pdev)
 
 	ftm_quaddec_init(ftm);
 
-	ret = counter_register(&ftm->counter);
+	ret = devm_add_action_or_reset(&pdev->dev, ftm_quaddec_disable, ftm);
 	if (ret)
-		ftm_quaddec_disable(ftm);
-
-	return ret;
-}
+		return ret;
 
-static int ftm_quaddec_remove(struct platform_device *pdev)
-{
-	struct ftm_quaddec *ftm = platform_get_drvdata(pdev);
-
-	counter_unregister(&ftm->counter);
-
-	ftm_quaddec_disable(ftm);
+	ret = devm_counter_register(&pdev->dev, &ftm->counter);
+	if (ret)
+		return ret;
 
 	return 0;
 }
@@ -346,7 +341,6 @@ static struct platform_driver ftm_quaddec_driver = {
 		.of_match_table = ftm_quaddec_match,
 	},
 	.probe = ftm_quaddec_probe,
-	.remove = ftm_quaddec_remove,
 };
 
 module_platform_driver(ftm_quaddec_driver);
diff --git a/drivers/i3c/device.c b/drivers/i3c/device.c
index 69cc040c3a1c..9e2e1406f85e 100644
--- a/drivers/i3c/device.c
+++ b/drivers/i3c/device.c
@@ -201,6 +201,59 @@ struct i3c_device *dev_to_i3cdev(struct device *dev)
 EXPORT_SYMBOL_GPL(dev_to_i3cdev);
 
 /**
+ * i3c_device_match_id() - Returns the i3c_device_id entry matching @i3cdev
+ * @i3cdev: I3C device
+ * @id_table: I3C device match table
+ *
+ * Return: a pointer to an i3c_device_id object or NULL if there's no match.
+ */
+const struct i3c_device_id *
+i3c_device_match_id(struct i3c_device *i3cdev,
+		    const struct i3c_device_id *id_table)
+{
+	struct i3c_device_info devinfo;
+	const struct i3c_device_id *id;
+
+	i3c_device_get_info(i3cdev, &devinfo);
+
+	/*
+	 * The lower 32bits of the provisional ID is just filled with a random
+	 * value, try to match using DCR info.
+	 */
+	if (!I3C_PID_RND_LOWER_32BITS(devinfo.pid)) {
+		u16 manuf = I3C_PID_MANUF_ID(devinfo.pid);
+		u16 part = I3C_PID_PART_ID(devinfo.pid);
+		u16 ext_info = I3C_PID_EXTRA_INFO(devinfo.pid);
+
+		/* First try to match by manufacturer/part ID. */
+		for (id = id_table; id->match_flags != 0; id++) {
+			if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) !=
+			    I3C_MATCH_MANUF_AND_PART)
+				continue;
+
+			if (manuf != id->manuf_id || part != id->part_id)
+				continue;
+
+			if ((id->match_flags & I3C_MATCH_EXTRA_INFO) &&
+			    ext_info != id->extra_info)
+				continue;
+
+			return id;
+		}
+	}
+
+	/* Fallback to DCR match. */
+	for (id = id_table; id->match_flags != 0; id++) {
+		if ((id->match_flags & I3C_MATCH_DCR) &&
+		    id->dcr == devinfo.dcr)
+			return id;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(i3c_device_match_id);
+
+/**
  * i3c_driver_register_with_owner() - register an I3C device driver
  *
  * @drv: driver to register
diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index d6f8b038a896..c58729081899 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -276,51 +276,6 @@ static const struct device_type i3c_device_type = {
 	.uevent = i3c_device_uevent,
 };
 
-static const struct i3c_device_id *
-i3c_device_match_id(struct i3c_device *i3cdev,
-		    const struct i3c_device_id *id_table)
-{
-	struct i3c_device_info devinfo;
-	const struct i3c_device_id *id;
-
-	i3c_device_get_info(i3cdev, &devinfo);
-
-	/*
-	 * The lower 32bits of the provisional ID is just filled with a random
-	 * value, try to match using DCR info.
-	 */
-	if (!I3C_PID_RND_LOWER_32BITS(devinfo.pid)) {
-		u16 manuf = I3C_PID_MANUF_ID(devinfo.pid);
-		u16 part = I3C_PID_PART_ID(devinfo.pid);
-		u16 ext_info = I3C_PID_EXTRA_INFO(devinfo.pid);
-
-		/* First try to match by manufacturer/part ID. */
-		for (id = id_table; id->match_flags != 0; id++) {
-			if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) !=
-			    I3C_MATCH_MANUF_AND_PART)
-				continue;
-
-			if (manuf != id->manuf_id || part != id->part_id)
-				continue;
-
-			if ((id->match_flags & I3C_MATCH_EXTRA_INFO) &&
-			    ext_info != id->extra_info)
-				continue;
-
-			return id;
-		}
-	}
-
-	/* Fallback to DCR match. */
-	for (id = id_table; id->match_flags != 0; id++) {
-		if ((id->match_flags & I3C_MATCH_DCR) &&
-		    id->dcr == devinfo.dcr)
-			return id;
-	}
-
-	return NULL;
-}
-
 static int i3c_device_match(struct device *dev, struct device_driver *drv)
 {
 	struct i3c_device *i3cdev;
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 9b9656ce37e6..d4ef35aeb579 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -202,9 +202,7 @@ config HID_SENSOR_ACCEL_3D
 
 config IIO_CROS_EC_ACCEL_LEGACY
 	tristate "ChromeOS EC Legacy Accelerometer Sensor"
-	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
-	select CROS_EC_LPC_REGISTER_DEVICE
+	depends on IIO_CROS_EC_SENSORS_CORE
 	help
 	  Say yes here to get support for accelerometers on Chromebook using
 	  legacy EC firmware.
diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c
index ad19d9c716f4..39002cb5605d 100644
--- a/drivers/iio/accel/cros_ec_accel_legacy.c
+++ b/drivers/iio/accel/cros_ec_accel_legacy.c
@@ -5,13 +5,14 @@
  * Copyright 2017 Google, Inc
  *
  * This driver uses the memory mapper cros-ec interface to communicate
- * with the Chrome OS EC about accelerometer data.
+ * with the Chrome OS EC about accelerometer data or older commands.
  * Accelerometer access is presented through iio sysfs.
  */
 
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/iio/buffer.h>
+#include <linux/iio/common/cros_ec_sensors_core.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/kfifo_buf.h>
 #include <linux/iio/trigger_consumer.h>
@@ -25,160 +26,41 @@
 
 #define DRV_NAME	"cros-ec-accel-legacy"
 
+#define CROS_EC_SENSOR_LEGACY_NUM 2
 /*
  * Sensor scale hard coded at 10 bits per g, computed as:
  * g / (2^10 - 1) = 0.009586168; with g = 9.80665 m.s^-2
  */
 #define ACCEL_LEGACY_NSCALE 9586168
 
-/* Indices for EC sensor values. */
-enum {
-	X,
-	Y,
-	Z,
-	MAX_AXIS,
-};
-
-/* State data for cros_ec_accel_legacy iio driver. */
-struct cros_ec_accel_legacy_state {
-	struct cros_ec_device *ec;
-
-	/*
-	 * Array holding data from a single capture. 2 bytes per channel
-	 * for the 3 channels plus the timestamp which is always last and
-	 * 8-bytes aligned.
-	 */
-	s16 capture_data[8];
-	s8 sign[MAX_AXIS];
-	u8 sensor_num;
-};
-
-static int ec_cmd_read_u8(struct cros_ec_device *ec, unsigned int offset,
-			  u8 *dest)
-{
-	return ec->cmd_readmem(ec, offset, 1, dest);
-}
-
-static int ec_cmd_read_u16(struct cros_ec_device *ec, unsigned int offset,
-			   u16 *dest)
-{
-	__le16 tmp;
-	int ret = ec->cmd_readmem(ec, offset, 2, &tmp);
-
-	*dest = le16_to_cpu(tmp);
-
-	return ret;
-}
-
-/**
- * read_ec_until_not_busy() - Read from EC status byte until it reads not busy.
- * @st: Pointer to state information for device.
- *
- * This function reads EC status until its busy bit gets cleared. It does not
- * wait indefinitely and returns -EIO if the EC status is still busy after a
- * few hundreds milliseconds.
- *
- * Return: 8-bit status if ok, -EIO on error
- */
-static int read_ec_until_not_busy(struct cros_ec_accel_legacy_state *st)
-{
-	struct cros_ec_device *ec = st->ec;
-	u8 status;
-	int attempts = 0;
-
-	ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status);
-	while (status & EC_MEMMAP_ACC_STATUS_BUSY_BIT) {
-		/* Give up after enough attempts, return error. */
-		if (attempts++ >= 50)
-			return -EIO;
-
-		/* Small delay every so often. */
-		if (attempts % 5 == 0)
-			msleep(25);
-
-		ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status);
-	}
-
-	return status;
-}
-
-/**
- * read_ec_accel_data_unsafe() - Read acceleration data from EC shared memory.
- * @st:        Pointer to state information for device.
- * @scan_mask: Bitmap of the sensor indices to scan.
- * @data:      Location to store data.
- *
- * This is the unsafe function for reading the EC data. It does not guarantee
- * that the EC will not modify the data as it is being read in.
- */
-static void read_ec_accel_data_unsafe(struct cros_ec_accel_legacy_state *st,
-				      unsigned long scan_mask, s16 *data)
-{
-	int i = 0;
-	int num_enabled = bitmap_weight(&scan_mask, MAX_AXIS);
-
-	/* Read all sensors enabled in scan_mask. Each value is 2 bytes. */
-	while (num_enabled--) {
-		i = find_next_bit(&scan_mask, MAX_AXIS, i);
-		ec_cmd_read_u16(st->ec,
-				EC_MEMMAP_ACC_DATA +
-				sizeof(s16) *
-				(1 + i + st->sensor_num * MAX_AXIS),
-				data);
-		*data *= st->sign[i];
-		i++;
-		data++;
-	}
-}
-
-/**
- * read_ec_accel_data() - Read acceleration data from EC shared memory.
- * @st:        Pointer to state information for device.
- * @scan_mask: Bitmap of the sensor indices to scan.
- * @data:      Location to store data.
- *
- * This is the safe function for reading the EC data. It guarantees that
- * the data sampled was not modified by the EC while being read.
- *
- * Return: 0 if ok, -ve on error
- */
-static int read_ec_accel_data(struct cros_ec_accel_legacy_state *st,
-			      unsigned long scan_mask, s16 *data)
+static int cros_ec_accel_legacy_read_cmd(struct iio_dev *indio_dev,
+				  unsigned long scan_mask, s16 *data)
 {
-	u8 samp_id = 0xff;
-	u8 status = 0;
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
 	int ret;
-	int attempts = 0;
+	unsigned int i;
+	u8 sensor_num;
 
 	/*
-	 * Continually read all data from EC until the status byte after
-	 * all reads reflects that the EC is not busy and the sample id
-	 * matches the sample id from before all reads. This guarantees
-	 * that data read in was not modified by the EC while reading.
+	 * Read all sensor data through a command.
+	 * Save sensor_num, it is assumed to stay.
 	 */
-	while ((status & (EC_MEMMAP_ACC_STATUS_BUSY_BIT |
-			  EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK)) != samp_id) {
-		/* If we have tried to read too many times, return error. */
-		if (attempts++ >= 5)
-			return -EIO;
-
-		/* Read status byte until EC is not busy. */
-		ret = read_ec_until_not_busy(st);
-		if (ret < 0)
-			return ret;
-		status = ret;
-
-		/*
-		 * Store the current sample id so that we can compare to the
-		 * sample id after reading the data.
-		 */
-		samp_id = status & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK;
-
-		/* Read all EC data, format it, and store it into data. */
-		read_ec_accel_data_unsafe(st, scan_mask, data);
+	sensor_num = st->param.info.sensor_num;
+	st->param.cmd = MOTIONSENSE_CMD_DUMP;
+	st->param.dump.max_sensor_count = CROS_EC_SENSOR_LEGACY_NUM;
+	ret = cros_ec_motion_send_host_cmd(st,
+			sizeof(st->resp->dump) + CROS_EC_SENSOR_LEGACY_NUM *
+			sizeof(struct ec_response_motion_sensor_data));
+	st->param.info.sensor_num = sensor_num;
+	if (ret != 0) {
+		dev_warn(&indio_dev->dev, "Unable to read sensor data\n");
+		return ret;
+	}
 
-		/* Read status byte. */
-		ec_cmd_read_u8(st->ec, EC_MEMMAP_ACC_STATUS, &status);
+	for_each_set_bit(i, &scan_mask, indio_dev->masklength) {
+		*data = st->resp->dump.sensor[sensor_num].data[i] *
+			st->sign[i];
+		data++;
 	}
 
 	return 0;
@@ -188,28 +70,40 @@ static int cros_ec_accel_legacy_read(struct iio_dev *indio_dev,
 				     struct iio_chan_spec const *chan,
 				     int *val, int *val2, long mask)
 {
-	struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
 	s16 data = 0;
-	int ret = IIO_VAL_INT;
+	int ret;
+	int idx = chan->scan_index;
+
+	mutex_lock(&st->cmd_lock);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		ret = read_ec_accel_data(st, (1 << chan->scan_index), &data);
-		if (ret)
-			return ret;
+		ret = st->read_ec_sensors_data(indio_dev, 1 << idx, &data);
+		if (ret < 0)
+			break;
+		ret = IIO_VAL_INT;
 		*val = data;
-		return IIO_VAL_INT;
+		break;
 	case IIO_CHAN_INFO_SCALE:
+		WARN_ON(st->type != MOTIONSENSE_TYPE_ACCEL);
 		*val = 0;
 		*val2 = ACCEL_LEGACY_NSCALE;
-		return IIO_VAL_INT_PLUS_NANO;
+		ret = IIO_VAL_INT_PLUS_NANO;
+		break;
 	case IIO_CHAN_INFO_CALIBBIAS:
 		/* Calibration not supported. */
 		*val = 0;
-		return IIO_VAL_INT;
+		ret = IIO_VAL_INT;
+		break;
 	default:
-		return -EINVAL;
+		ret = cros_ec_sensors_core_read(st, chan, val, val2,
+				mask);
+		break;
 	}
+	mutex_unlock(&st->cmd_lock);
+
+	return ret;
 }
 
 static int cros_ec_accel_legacy_write(struct iio_dev *indio_dev,
@@ -231,86 +125,14 @@ static const struct iio_info cros_ec_accel_legacy_info = {
 	.write_raw = &cros_ec_accel_legacy_write,
 };
 
-/**
- * cros_ec_accel_legacy_capture() - The trigger handler function
- * @irq: The interrupt number.
- * @p:   Private data - always a pointer to the poll func.
- *
- * On a trigger event occurring, if the pollfunc is attached then this
- * handler is called as a threaded interrupt (and hence may sleep). It
- * is responsible for grabbing data from the device and pushing it into
- * the associated buffer.
- *
- * Return: IRQ_HANDLED
+/*
+ * Present the channel using HTML5 standard:
+ * need to invert X and Y and invert some lid axis.
  */
-static irqreturn_t cros_ec_accel_legacy_capture(int irq, void *p)
-{
-	struct iio_poll_func *pf = p;
-	struct iio_dev *indio_dev = pf->indio_dev;
-	struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev);
-
-	/* Clear capture data. */
-	memset(st->capture_data, 0, sizeof(st->capture_data));
-
-	/*
-	 * Read data based on which channels are enabled in scan mask. Note
-	 * that on a capture we are always reading the calibrated data.
-	 */
-	read_ec_accel_data(st, *indio_dev->active_scan_mask, st->capture_data);
-
-	iio_push_to_buffers_with_timestamp(indio_dev, (void *)st->capture_data,
-					   iio_get_time_ns(indio_dev));
-
-	/*
-	 * Tell the core we are done with this trigger and ready for the
-	 * next one.
-	 */
-	iio_trigger_notify_done(indio_dev->trig);
-
-	return IRQ_HANDLED;
-}
-
-static char *cros_ec_accel_legacy_loc_strings[] = {
-	[MOTIONSENSE_LOC_BASE] = "base",
-	[MOTIONSENSE_LOC_LID] = "lid",
-	[MOTIONSENSE_LOC_MAX] = "unknown",
-};
-
-static ssize_t cros_ec_accel_legacy_loc(struct iio_dev *indio_dev,
-					uintptr_t private,
-					const struct iio_chan_spec *chan,
-					char *buf)
-{
-	struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev);
-
-	return sprintf(buf, "%s\n",
-		       cros_ec_accel_legacy_loc_strings[st->sensor_num +
-							MOTIONSENSE_LOC_BASE]);
-}
-
-static ssize_t cros_ec_accel_legacy_id(struct iio_dev *indio_dev,
-				       uintptr_t private,
-				       const struct iio_chan_spec *chan,
-				       char *buf)
-{
-	struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev);
-
-	return sprintf(buf, "%d\n", st->sensor_num);
-}
-
-static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = {
-	{
-		.name = "id",
-		.shared = IIO_SHARED_BY_ALL,
-		.read = cros_ec_accel_legacy_id,
-	},
-	{
-		.name = "location",
-		.shared = IIO_SHARED_BY_ALL,
-		.read = cros_ec_accel_legacy_loc,
-	},
-	{ }
-};
+#define CROS_EC_ACCEL_ROTATE_AXIS(_axis)				\
+	((_axis) == CROS_EC_SENSOR_Z ? CROS_EC_SENSOR_Z :		\
+	 ((_axis) == CROS_EC_SENSOR_X ? CROS_EC_SENSOR_Y :		\
+	  CROS_EC_SENSOR_X))
 
 #define CROS_EC_ACCEL_LEGACY_CHAN(_axis)				\
 	{								\
@@ -321,28 +143,28 @@ static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = {
 			BIT(IIO_CHAN_INFO_RAW) |			\
 			BIT(IIO_CHAN_INFO_CALIBBIAS),			\
 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE),	\
-		.ext_info = cros_ec_accel_legacy_ext_info,		\
+		.ext_info = cros_ec_sensors_ext_info,			\
 		.scan_type = {						\
 			.sign = 's',					\
-			.realbits = 16,					\
-			.storagebits = 16,				\
+			.realbits = CROS_EC_SENSOR_BITS,		\
+			.storagebits = CROS_EC_SENSOR_BITS,		\
 		},							\
+		.scan_index = CROS_EC_ACCEL_ROTATE_AXIS(_axis),		\
 	}								\
 
-static struct iio_chan_spec ec_accel_channels[] = {
-	CROS_EC_ACCEL_LEGACY_CHAN(X),
-	CROS_EC_ACCEL_LEGACY_CHAN(Y),
-	CROS_EC_ACCEL_LEGACY_CHAN(Z),
-	IIO_CHAN_SOFT_TIMESTAMP(MAX_AXIS)
+static const struct iio_chan_spec cros_ec_accel_legacy_channels[] = {
+		CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_X),
+		CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_Y),
+		CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_Z),
+		IIO_CHAN_SOFT_TIMESTAMP(CROS_EC_SENSOR_MAX_AXIS)
 };
 
 static int cros_ec_accel_legacy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct cros_ec_dev *ec = dev_get_drvdata(dev->parent);
-	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
 	struct iio_dev *indio_dev;
-	struct cros_ec_accel_legacy_state *state;
+	struct cros_ec_sensors_core_state *state;
 	int ret;
 
 	if (!ec || !ec->ec_dev) {
@@ -350,46 +172,32 @@ static int cros_ec_accel_legacy_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (!ec->ec_dev->cmd_readmem) {
-		dev_warn(&pdev->dev, "EC does not support direct reads.\n");
-		return -EINVAL;
-	}
-
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state));
 	if (!indio_dev)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, indio_dev);
-	state = iio_priv(indio_dev);
-	state->ec = ec->ec_dev;
-	state->sensor_num = sensor_platform->sensor_num;
-
-	indio_dev->dev.parent = dev;
-	indio_dev->name = pdev->name;
-	indio_dev->channels = ec_accel_channels;
-	/*
-	 * Present the channel using HTML5 standard:
-	 * need to invert X and Y and invert some lid axis.
-	 */
-	ec_accel_channels[X].scan_index = Y;
-	ec_accel_channels[Y].scan_index = X;
-	ec_accel_channels[Z].scan_index = Z;
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	if (ret)
+		return ret;
 
-	state->sign[Y] = 1;
+	indio_dev->info = &cros_ec_accel_legacy_info;
+	state = iio_priv(indio_dev);
 
-	if (state->sensor_num == MOTIONSENSE_LOC_LID)
-		state->sign[X] = state->sign[Z] = -1;
+	if (state->ec->cmd_readmem != NULL)
+		state->read_ec_sensors_data = cros_ec_sensors_read_lpc;
 	else
-		state->sign[X] = state->sign[Z] = 1;
-
-	indio_dev->num_channels = ARRAY_SIZE(ec_accel_channels);
-	indio_dev->dev.parent = &pdev->dev;
-	indio_dev->info = &cros_ec_accel_legacy_info;
-	indio_dev->modes = INDIO_DIRECT_MODE;
+		state->read_ec_sensors_data = cros_ec_accel_legacy_read_cmd;
+
+	indio_dev->channels = cros_ec_accel_legacy_channels;
+	indio_dev->num_channels = ARRAY_SIZE(cros_ec_accel_legacy_channels);
+	/* The lid sensor needs to be presented inverted. */
+	if (state->loc == MOTIONSENSE_LOC_LID) {
+		state->sign[CROS_EC_SENSOR_X] = -1;
+		state->sign[CROS_EC_SENSOR_Z] = -1;
+	}
 
 	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
-					      cros_ec_accel_legacy_capture,
-					      NULL);
+			cros_ec_sensors_capture, NULL);
 	if (ret)
 		return ret;
 
diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c
index 637e6e676061..3d5bea651923 100644
--- a/drivers/iio/accel/mxc4005.c
+++ b/drivers/iio/accel/mxc4005.c
@@ -424,7 +424,7 @@ static int mxc4005_probe(struct i2c_client *client,
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &mxc4005_info;
 
-	ret = iio_triggered_buffer_setup(indio_dev,
+	ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
 					 iio_pollfunc_store_time,
 					 mxc4005_trigger_handler,
 					 NULL);
@@ -452,7 +452,7 @@ static int mxc4005_probe(struct i2c_client *client,
 		if (ret) {
 			dev_err(&client->dev,
 				"failed to init threaded irq\n");
-			goto err_buffer_cleanup;
+			return ret;
 		}
 
 		data->dready_trig->dev.parent = &client->dev;
@@ -460,43 +460,16 @@ static int mxc4005_probe(struct i2c_client *client,
 		iio_trigger_set_drvdata(data->dready_trig, indio_dev);
 		indio_dev->trig = data->dready_trig;
 		iio_trigger_get(indio_dev->trig);
-		ret = iio_trigger_register(data->dready_trig);
+		ret = devm_iio_trigger_register(&client->dev,
+						data->dready_trig);
 		if (ret) {
 			dev_err(&client->dev,
 				"failed to register trigger\n");
-			goto err_trigger_unregister;
+			return ret;
 		}
 	}
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&client->dev,
-			"unable to register iio device %d\n", ret);
-		goto err_buffer_cleanup;
-	}
-
-	return 0;
-
-err_trigger_unregister:
-	iio_trigger_unregister(data->dready_trig);
-err_buffer_cleanup:
-	iio_triggered_buffer_cleanup(indio_dev);
-
-	return ret;
-}
-
-static int mxc4005_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct mxc4005_data *data = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-
-	iio_triggered_buffer_cleanup(indio_dev);
-	if (data->dready_trig)
-		iio_trigger_unregister(data->dready_trig);
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct acpi_device_id mxc4005_acpi_match[] = {
@@ -517,7 +490,6 @@ static struct i2c_driver mxc4005_driver = {
 		.acpi_match_table = ACPI_PTR(mxc4005_acpi_match),
 	},
 	.probe		= mxc4005_probe,
-	.remove		= mxc4005_remove,
 	.id_table	= mxc4005_id,
 };
 
diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c
index a923f90f6e80..66d768d971e1 100644
--- a/drivers/iio/accel/sca3000.c
+++ b/drivers/iio/accel/sca3000.c
@@ -111,7 +111,7 @@
 /* Currently unsupported */
 #define SCA3000_MD_CTRL_AND_Y				BIT(3)
 #define SCA3000_MD_CTRL_AND_X				BIT(4)
-#define SAC3000_MD_CTRL_AND_Z				BIT(5)
+#define SCA3000_MD_CTRL_AND_Z				BIT(5)
 
 /*
  * Some control registers of complex access methods requiring this register to
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index 979ab9679b99..af09943f38c9 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -68,6 +68,7 @@ static const struct st_sensors_platform_data default_accel_pdata = {
 	.drdy_int_pin = 1,
 };
 
+const struct st_sensor_settings *st_accel_get_settings(const char *name);
 int st_accel_common_probe(struct iio_dev *indio_dev);
 void st_accel_common_remove(struct iio_dev *indio_dev);
 
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
index 0205c0167cdd..9f2b40474b8e 100644
--- a/drivers/iio/accel/st_accel_buffer.c
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -29,65 +29,51 @@ int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
 	return st_sensors_set_dataready_irq(indio_dev, state);
 }
 
-static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
-{
-	return st_sensors_set_enable(indio_dev, true);
-}
-
 static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
 {
 	int err;
-	struct st_sensor_data *adata = iio_priv(indio_dev);
-
-	adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
-	if (adata->buffer_data == NULL) {
-		err = -ENOMEM;
-		goto allocate_memory_error;
-	}
 
 	err = iio_triggered_buffer_postenable(indio_dev);
 	if (err < 0)
-		goto st_accel_buffer_postenable_error;
+		return err;
 
 	err = st_sensors_set_axis_enable(indio_dev,
-					(u8)indio_dev->active_scan_mask[0]);
+					 (u8)indio_dev->active_scan_mask[0]);
 	if (err < 0)
-		goto st_sensors_set_axis_enable_error;
+		goto st_accel_buffer_predisable;
 
-	return err;
+	err = st_sensors_set_enable(indio_dev, true);
+	if (err < 0)
+		goto st_accel_buffer_enable_all_axis;
 
-st_sensors_set_axis_enable_error:
+	return 0;
+
+st_accel_buffer_enable_all_axis:
+	st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
+st_accel_buffer_predisable:
 	iio_triggered_buffer_predisable(indio_dev);
-st_accel_buffer_postenable_error:
-	kfree(adata->buffer_data);
-allocate_memory_error:
 	return err;
 }
 
 static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
 {
 	int err, err2;
-	struct st_sensor_data *adata = iio_priv(indio_dev);
-
-	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
-	if (err < 0)
-		goto st_accel_buffer_predisable_error;
 
 	err = st_sensors_set_enable(indio_dev, false);
 	if (err < 0)
-		goto st_accel_buffer_predisable_error;
+		goto st_accel_buffer_predisable;
+
+	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
 
-st_accel_buffer_predisable_error:
+st_accel_buffer_predisable:
 	err2 = iio_triggered_buffer_predisable(indio_dev);
 	if (!err)
 		err = err2;
 
-	kfree(adata->buffer_data);
 	return err;
 }
 
 static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
-	.preenable = &st_accel_buffer_preenable,
 	.postenable = &st_accel_buffer_postenable,
 	.predisable = &st_accel_buffer_predisable,
 };
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index e02b79931979..2e37f8a6d8cf 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -13,7 +13,6 @@
 #include <linux/acpi.h>
 #include <linux/errno.h>
 #include <linux/types.h>
-#include <linux/mutex.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
@@ -1147,32 +1146,45 @@ out:
 #endif
 }
 
+/*
+ * st_accel_get_settings() - get sensor settings from device name
+ * @name: device name buffer reference.
+ *
+ * Return: valid reference on success, NULL otherwise.
+ */
+const struct st_sensor_settings *st_accel_get_settings(const char *name)
+{
+	int index = st_sensors_get_settings_index(name,
+					st_accel_sensors_settings,
+					ARRAY_SIZE(st_accel_sensors_settings));
+	if (index < 0)
+		return NULL;
+
+	return &st_accel_sensors_settings[index];
+}
+EXPORT_SYMBOL(st_accel_get_settings);
+
 int st_accel_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *adata = iio_priv(indio_dev);
 	struct st_sensors_platform_data *pdata =
 		(struct st_sensors_platform_data *)adata->dev->platform_data;
-	int irq = adata->get_irq_data_ready(indio_dev);
 	struct iio_chan_spec *channels;
 	size_t channels_size;
 	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &accel_info;
-	mutex_init(&adata->tb.buf_lock);
 
 	err = st_sensors_power_enable(indio_dev);
 	if (err)
 		return err;
 
-	err = st_sensors_check_device_support(indio_dev,
-					ARRAY_SIZE(st_accel_sensors_settings),
-					st_accel_sensors_settings);
+	err = st_sensors_verify_id(indio_dev);
 	if (err < 0)
 		goto st_accel_power_off;
 
 	adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
-	adata->multiread_bit = adata->sensor_settings->multi_read_bit;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
 	channels_size = indio_dev->num_channels * sizeof(struct iio_chan_spec);
@@ -1204,7 +1216,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
 	if (err < 0)
 		goto st_accel_power_off;
 
-	if (irq > 0) {
+	if (adata->irq > 0) {
 		err = st_sensors_allocate_trigger(indio_dev,
 						 ST_ACCEL_TRIGGER_OPS);
 		if (err < 0)
@@ -1221,7 +1233,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
 	return 0;
 
 st_accel_device_register_error:
-	if (irq > 0)
+	if (adata->irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 st_accel_probe_trigger_error:
 	st_accel_deallocate_ring(indio_dev);
@@ -1239,7 +1251,7 @@ void st_accel_common_remove(struct iio_dev *indio_dev)
 	st_sensors_power_disable(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (adata->get_irq_data_ready(indio_dev) > 0)
+	if (adata->irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 
 	st_accel_deallocate_ring(indio_dev);
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index c3c8f2e73c2a..50fa0fc32baa 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -150,22 +150,33 @@ MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
 
 static int st_accel_i2c_probe(struct i2c_client *client)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *adata;
+	struct iio_dev *indio_dev;
 	const char *match;
 	int ret;
 
+	match = device_get_match_data(&client->dev);
+	if (match)
+		strlcpy(client->name, match, sizeof(client->name));
+
+	settings = st_accel_get_settings(client->name);
+	if (!settings) {
+		dev_err(&client->dev, "device name %s not recognized.\n",
+			client->name);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adata));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	adata = iio_priv(indio_dev);
+	adata->sensor_settings = (struct st_sensor_settings *)settings;
 
-	match = device_get_match_data(&client->dev);
-	if (match)
-		strlcpy(client->name, match, sizeof(client->name));
-
-	st_sensors_i2c_configure(indio_dev, client, adata);
+	ret = st_sensors_i2c_configure(indio_dev, client);
+	if (ret < 0)
+		return ret;
 
 	ret = st_accel_common_probe(indio_dev);
 	if (ret < 0)
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index 474742e35d92..8af7027d5598 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -102,19 +102,31 @@ MODULE_DEVICE_TABLE(of, st_accel_of_match);
 
 static int st_accel_spi_probe(struct spi_device *spi)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *adata;
+	struct iio_dev *indio_dev;
 	int err;
 
+	st_sensors_of_name_probe(&spi->dev, st_accel_of_match,
+				 spi->modalias, sizeof(spi->modalias));
+
+	settings = st_accel_get_settings(spi->modalias);
+	if (!settings) {
+		dev_err(&spi->dev, "device name %s not recognized.\n",
+			spi->modalias);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adata));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	adata = iio_priv(indio_dev);
+	adata->sensor_settings = (struct st_sensor_settings *)settings;
 
-	st_sensors_of_name_probe(&spi->dev, st_accel_of_match,
-				 spi->modalias, sizeof(spi->modalias));
-	st_sensors_spi_configure(indio_dev, spi, adata);
+	err = st_sensors_spi_configure(indio_dev, spi);
+	if (err < 0)
+		return err;
 
 	err = st_accel_common_probe(indio_dev);
 	if (err < 0)
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index aba0fd123a51..ed2d08437e5d 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -35,6 +35,11 @@ static const unsigned int ad7606_scale_avail[2] = {
 	152588, 305176
 };
 
+
+static const unsigned int ad7616_sw_scale_avail[3] = {
+	76293, 152588, 305176
+};
+
 static const unsigned int ad7606_oversampling_avail[7] = {
 	1, 2, 4, 8, 16, 32, 64,
 };
@@ -55,6 +60,29 @@ static int ad7606_reset(struct ad7606_state *st)
 	return -ENODEV;
 }
 
+static int ad7606_reg_access(struct iio_dev *indio_dev,
+			     unsigned int reg,
+			     unsigned int writeval,
+			     unsigned int *readval)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->lock);
+	if (readval) {
+		ret = st->bops->reg_read(st, reg);
+		if (ret < 0)
+			goto err_unlock;
+		*readval = ret;
+		ret = 0;
+	} else {
+		ret = st->bops->reg_write(st, reg, writeval);
+	}
+err_unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
 static int ad7606_read_samples(struct ad7606_state *st)
 {
 	unsigned int num = st->chip_info->num_channels;
@@ -308,29 +336,6 @@ static const struct attribute_group ad7606_attribute_group_range = {
 	.attrs = ad7606_attributes_range,
 };
 
-#define AD760X_CHANNEL(num, mask) {				\
-		.type = IIO_VOLTAGE,				\
-		.indexed = 1,					\
-		.channel = num,					\
-		.address = num,					\
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
-		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
-		.info_mask_shared_by_all = mask,		\
-		.scan_index = num,				\
-		.scan_type = {					\
-			.sign = 's',				\
-			.realbits = 16,				\
-			.storagebits = 16,			\
-			.endianness = IIO_CPU,			\
-		},						\
-}
-
-#define AD7605_CHANNEL(num)	\
-	AD760X_CHANNEL(num, 0)
-
-#define AD7606_CHANNEL(num)	\
-	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
-
 static const struct iio_chan_spec ad7605_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(4),
 	AD7605_CHANNEL(0),
@@ -519,6 +524,14 @@ static const struct iio_info ad7606_info_os_and_range = {
 	.validate_trigger = &ad7606_validate_trigger,
 };
 
+static const struct iio_info ad7606_info_os_range_and_debug = {
+	.read_raw = &ad7606_read_raw,
+	.write_raw = &ad7606_write_raw,
+	.debugfs_reg_access = &ad7606_reg_access,
+	.attrs = &ad7606_attribute_group_os_and_range,
+	.validate_trigger = &ad7606_validate_trigger,
+};
+
 static const struct iio_info ad7606_info_os = {
 	.read_raw = &ad7606_read_raw,
 	.write_raw = &ad7606_write_raw,
@@ -617,35 +630,27 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 	if (ret)
 		dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
 
+	/* AD7616 requires al least 15ms to reconfigure after a reset */
+	if (msleep_interruptible(15))
+		return -ERESTARTSYS;
+
 	st->write_scale = ad7606_write_scale_hw;
 	st->write_os = ad7606_write_os_hw;
 
-	if (st->chip_info->sw_mode_config)
+	if (st->bops->sw_mode_config)
 		st->sw_mode_en = device_property_present(st->dev,
 							 "adi,sw-mode");
 
 	if (st->sw_mode_en) {
+		/* Scale of 0.076293 is only available in sw mode */
+		st->scale_avail = ad7616_sw_scale_avail;
+		st->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
+
 		/* After reset, in software mode, ±10 V is set by default */
 		memset32(st->range, 2, ARRAY_SIZE(st->range));
-		indio_dev->info = &ad7606_info_os_and_range;
-
-		/*
-		 * In software mode, the range gpio has no longer its function.
-		 * Instead, the scale can be configured individually for each
-		 * channel from the range registers.
-		 */
-		if (st->chip_info->write_scale_sw)
-			st->write_scale = st->chip_info->write_scale_sw;
-
-		/*
-		 * In software mode, the oversampling is no longer configured
-		 * with GPIO pins. Instead, the oversampling can be configured
-		 * in configuratiion register.
-		 */
-		if (st->chip_info->write_os_sw)
-			st->write_os = st->chip_info->write_os_sw;
-
-		ret = st->chip_info->sw_mode_config(indio_dev);
+		indio_dev->info = &ad7606_info_os_range_and_debug;
+
+		ret = st->bops->sw_mode_config(indio_dev);
 		if (ret < 0)
 			return ret;
 	}
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
index d8a509c2c428..eeaaa8b905db 100644
--- a/drivers/iio/adc/ad7606.h
+++ b/drivers/iio/adc/ad7606.h
@@ -8,6 +8,36 @@
 #ifndef IIO_ADC_AD7606_H_
 #define IIO_ADC_AD7606_H_
 
+#define AD760X_CHANNEL(num, mask_sep, mask_type, mask_all) {	\
+		.type = IIO_VOLTAGE,				\
+		.indexed = 1,					\
+		.channel = num,					\
+		.address = num,					\
+		.info_mask_separate = mask_sep,			\
+		.info_mask_shared_by_type = mask_type,		\
+		.info_mask_shared_by_all = mask_all,		\
+		.scan_index = num,				\
+		.scan_type = {					\
+			.sign = 's',				\
+			.realbits = 16,				\
+			.storagebits = 16,			\
+			.endianness = IIO_CPU,			\
+		},						\
+}
+
+#define AD7605_CHANNEL(num)				\
+	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW),	\
+		BIT(IIO_CHAN_INFO_SCALE), 0)
+
+#define AD7606_CHANNEL(num)				\
+	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW),	\
+		BIT(IIO_CHAN_INFO_SCALE),		\
+		BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
+
+#define AD7616_CHANNEL(num)	\
+	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),\
+		0, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
+
 /**
  * struct ad7606_chip_info - chip specific information
  * @channels:		channel specification
@@ -16,12 +46,6 @@
  *			oversampling ratios.
  * @oversampling_num	number of elements stored in oversampling_avail array
  * @os_req_reset	some devices require a reset to update oversampling
- * @write_scale_sw	pointer to the function which writes the scale via spi
-			in software mode
- * @write_os_sw		pointer to the function which writes the os via spi
-			in software mode
- * @sw_mode_config:	pointer to a function which configured the device
- *			for software mode
  */
 struct ad7606_chip_info {
 	const struct iio_chan_spec	*channels;
@@ -29,9 +53,6 @@ struct ad7606_chip_info {
 	const unsigned int		*oversampling_avail;
 	unsigned int			oversampling_num;
 	bool				os_req_reset;
-	int (*write_scale_sw)(struct iio_dev *indio_dev, int ch, int val);
-	int (*write_os_sw)(struct iio_dev *indio_dev, int val);
-	int (*sw_mode_config)(struct iio_dev *indio_dev);
 };
 
 /**
@@ -63,6 +84,7 @@ struct ad7606_chip_info {
  * @complete		completion to indicate end of conversion
  * @trig		The IIO trigger associated with the device.
  * @data		buffer for reading data from the device
+ * @d16			be16 buffer for reading data from the device
  */
 struct ad7606_state {
 	struct device			*dev;
@@ -96,15 +118,32 @@ struct ad7606_state {
 	 * 16 * 16-bit samples + 64-bit timestamp
 	 */
 	unsigned short			data[20] ____cacheline_aligned;
+	__be16				d16[2];
 };
 
 /**
  * struct ad7606_bus_ops - driver bus operations
  * @read_block		function pointer for reading blocks of data
+ * @sw_mode_config:	pointer to a function which configured the device
+ *			for software mode
+ * @reg_read	function pointer for reading spi register
+ * @reg_write	function pointer for writing spi register
+ * @write_mask	function pointer for write spi register with mask
+ * @rd_wr_cmd	pointer to the function which calculates the spi address
  */
 struct ad7606_bus_ops {
 	/* more methods added in future? */
 	int (*read_block)(struct device *dev, int num, void *data);
+	int (*sw_mode_config)(struct iio_dev *indio_dev);
+	int (*reg_read)(struct ad7606_state *st, unsigned int addr);
+	int (*reg_write)(struct ad7606_state *st,
+				unsigned int addr,
+				unsigned int val);
+	int (*write_mask)(struct ad7606_state *st,
+				 unsigned int addr,
+				 unsigned long mask,
+				 unsigned int val);
+	u16 (*rd_wr_cmd)(int addr, char isWriteOp);
 };
 
 int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
diff --git a/drivers/iio/adc/ad7606_par.c b/drivers/iio/adc/ad7606_par.c
index 1b08028facde..f732b3ac7878 100644
--- a/drivers/iio/adc/ad7606_par.c
+++ b/drivers/iio/adc/ad7606_par.c
@@ -53,10 +53,8 @@ static int ad7606_par_probe(struct platform_device *pdev)
 	int irq;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no irq: %d\n", irq);
+	if (irq < 0)
 		return irq;
-	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	addr = devm_ioremap_resource(&pdev->dev, res);
diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c
index b7faef69a58f..98ed52b74507 100644
--- a/drivers/iio/adc/ad7606_spi.c
+++ b/drivers/iio/adc/ad7606_spi.c
@@ -15,6 +15,51 @@
 
 #define MAX_SPI_FREQ_HZ		23500000	/* VDRIVE above 4.75 V */
 
+#define AD7616_CONFIGURATION_REGISTER	0x02
+#define AD7616_OS_MASK			GENMASK(4, 2)
+#define AD7616_BURST_MODE		BIT(6)
+#define AD7616_SEQEN_MODE		BIT(5)
+#define AD7616_RANGE_CH_A_ADDR_OFF	0x04
+#define AD7616_RANGE_CH_B_ADDR_OFF	0x06
+/*
+ * Range of channels from a group are stored in 2 registers.
+ * 0, 1, 2, 3 in a register followed by 4, 5, 6, 7 in second register.
+ * For channels from second group(8-15) the order is the same, only with
+ * an offset of 2 for register address.
+ */
+#define AD7616_RANGE_CH_ADDR(ch)	((ch) >> 2)
+/* The range of the channel is stored on 2 bits*/
+#define AD7616_RANGE_CH_MSK(ch)		(0b11 << (((ch) & 0b11) * 2))
+#define AD7616_RANGE_CH_MODE(ch, mode)	((mode) << ((((ch) & 0b11)) * 2))
+static const struct iio_chan_spec ad7616_sw_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(16),
+	AD7616_CHANNEL(0),
+	AD7616_CHANNEL(1),
+	AD7616_CHANNEL(2),
+	AD7616_CHANNEL(3),
+	AD7616_CHANNEL(4),
+	AD7616_CHANNEL(5),
+	AD7616_CHANNEL(6),
+	AD7616_CHANNEL(7),
+	AD7616_CHANNEL(8),
+	AD7616_CHANNEL(9),
+	AD7616_CHANNEL(10),
+	AD7616_CHANNEL(11),
+	AD7616_CHANNEL(12),
+	AD7616_CHANNEL(13),
+	AD7616_CHANNEL(14),
+	AD7616_CHANNEL(15),
+};
+
+static u16 ad7616_spi_rd_wr_cmd(int addr, char isWriteOp)
+{
+	/*
+	 * The address of register consist of one w/r bit
+	 * 6 bits of address followed by one reserved bit.
+	 */
+	return ((addr & 0x7F) << 1) | ((isWriteOp & 0x1) << 7);
+}
+
 static int ad7606_spi_read_block(struct device *dev,
 				 int count, void *buf)
 {
@@ -35,17 +80,145 @@ static int ad7606_spi_read_block(struct device *dev,
 	return 0;
 }
 
+static int ad7606_spi_reg_read(struct ad7606_state *st, unsigned int addr)
+{
+	struct spi_device *spi = to_spi_device(st->dev);
+	struct spi_transfer t[] = {
+		{
+			.tx_buf = &st->d16[0],
+			.len = 2,
+			.cs_change = 0,
+		}, {
+			.rx_buf = &st->d16[1],
+			.len = 2,
+		},
+	};
+	int ret;
+
+	st->d16[0] = cpu_to_be16(st->bops->rd_wr_cmd(addr, 0) << 8);
+
+	ret = spi_sync_transfer(spi, t, ARRAY_SIZE(t));
+	if (ret < 0)
+		return ret;
+
+	return be16_to_cpu(st->d16[1]);
+}
+
+static int ad7606_spi_reg_write(struct ad7606_state *st,
+				unsigned int addr,
+				unsigned int val)
+{
+	struct spi_device *spi = to_spi_device(st->dev);
+
+	st->d16[0] = cpu_to_be16((st->bops->rd_wr_cmd(addr, 1) << 8) |
+				  (val & 0x1FF));
+
+	return spi_write(spi, &st->d16[0], sizeof(st->d16[0]));
+}
+
+static int ad7606_spi_write_mask(struct ad7606_state *st,
+				 unsigned int addr,
+				 unsigned long mask,
+				 unsigned int val)
+{
+	int readval;
+
+	readval = st->bops->reg_read(st, addr);
+	if (readval < 0)
+		return readval;
+
+	readval &= ~mask;
+	readval |= val;
+
+	return st->bops->reg_write(st, addr, readval);
+}
+
+static int ad7616_write_scale_sw(struct iio_dev *indio_dev, int ch, int val)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	unsigned int ch_addr, mode, ch_index;
+
+
+	/*
+	 * Ad7616 has 16 channels divided in group A and group B.
+	 * The range of channels from A are stored in registers with address 4
+	 * while channels from B are stored in register with address 6.
+	 * The last bit from channels determines if it is from group A or B
+	 * because the order of channels in iio is 0A, 0B, 1A, 1B...
+	 */
+	ch_index = ch >> 1;
+
+	ch_addr = AD7616_RANGE_CH_ADDR(ch_index);
+
+	if ((ch & 0x1) == 0) /* channel A */
+		ch_addr += AD7616_RANGE_CH_A_ADDR_OFF;
+	else	/* channel B */
+		ch_addr += AD7616_RANGE_CH_B_ADDR_OFF;
+
+	/* 0b01 for 2.5v, 0b10 for 5v and 0b11 for 10v */
+	mode = AD7616_RANGE_CH_MODE(ch_index, ((val + 1) & 0b11));
+	return st->bops->write_mask(st, ch_addr, AD7616_RANGE_CH_MSK(ch_index),
+				     mode);
+}
+
+static int ad7616_write_os_sw(struct iio_dev *indio_dev, int val)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	return st->bops->write_mask(st, AD7616_CONFIGURATION_REGISTER,
+				     AD7616_OS_MASK, val << 2);
+}
+
+static int ad7616_sw_mode_config(struct iio_dev *indio_dev)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	/*
+	 * Scale can be configured individually for each channel
+	 * in software mode.
+	 */
+	indio_dev->channels = ad7616_sw_channels;
+
+	st->write_scale = ad7616_write_scale_sw;
+	st->write_os = &ad7616_write_os_sw;
+
+	/* Activate Burst mode and SEQEN MODE */
+	return st->bops->write_mask(st,
+			      AD7616_CONFIGURATION_REGISTER,
+			      AD7616_BURST_MODE | AD7616_SEQEN_MODE,
+			      AD7616_BURST_MODE | AD7616_SEQEN_MODE);
+}
+
 static const struct ad7606_bus_ops ad7606_spi_bops = {
 	.read_block = ad7606_spi_read_block,
 };
 
+static const struct ad7606_bus_ops ad7616_spi_bops = {
+	.read_block = ad7606_spi_read_block,
+	.reg_read = ad7606_spi_reg_read,
+	.reg_write = ad7606_spi_reg_write,
+	.write_mask = ad7606_spi_write_mask,
+	.rd_wr_cmd = ad7616_spi_rd_wr_cmd,
+	.sw_mode_config = ad7616_sw_mode_config,
+};
+
 static int ad7606_spi_probe(struct spi_device *spi)
 {
 	const struct spi_device_id *id = spi_get_device_id(spi);
+	const struct ad7606_bus_ops *bops;
+
+	switch (id->driver_data) {
+	case ID_AD7616:
+		bops = &ad7616_spi_bops;
+		break;
+	default:
+		bops = &ad7606_spi_bops;
+		break;
+	}
 
 	return ad7606_probe(&spi->dev, spi->irq, NULL,
 			    id->name, id->driver_data,
-			    &ad7606_spi_bops);
+			    bops);
 }
 
 static const struct spi_device_id ad7606_id_table[] = {
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 32f1c4a33b20..abe99856c823 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -1179,10 +1179,8 @@ static int at91_adc_probe(struct platform_device *pdev)
 	idev->info = &at91_adc_info;
 
 	st->irq = platform_get_irq(pdev, 0);
-	if (st->irq < 0) {
-		dev_err(&pdev->dev, "No IRQ ID is designated\n");
+	if (st->irq < 0)
 		return -ENODEV;
-	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index 31d51bcc5f2c..adc9cf7a075d 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -225,10 +225,8 @@ static int axp288_adc_probe(struct platform_device *pdev)
 
 	info = iio_priv(indio_dev);
 	info->irq = platform_get_irq(pdev, 0);
-	if (info->irq < 0) {
-		dev_err(&pdev->dev, "no irq resource?\n");
+	if (info->irq < 0)
 		return info->irq;
-	}
 	platform_set_drvdata(pdev, indio_dev);
 	info->regmap = axp20x->regmap;
 	/*
diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c
index c46c0aa15376..646ebdc0a8b4 100644
--- a/drivers/iio/adc/bcm_iproc_adc.c
+++ b/drivers/iio/adc/bcm_iproc_adc.c
@@ -540,11 +540,8 @@ static int iproc_adc_probe(struct platform_device *pdev)
 	}
 
 	adc_priv->irqno = platform_get_irq(pdev, 0);
-	if (adc_priv->irqno <= 0) {
-		dev_err(&pdev->dev, "platform_get_irq failed\n");
-		ret = -ENODEV;
-		return ret;
-	}
+	if (adc_priv->irqno <= 0)
+		return -ENODEV;
 
 	ret = regmap_update_bits(adc_priv->regmap, IPROC_REGCTL2,
 				IPROC_ADC_AUXIN_SCAN_ENA, 0);
diff --git a/drivers/iio/adc/da9150-gpadc.c b/drivers/iio/adc/da9150-gpadc.c
index 354433996101..ae8bcc32f63d 100644
--- a/drivers/iio/adc/da9150-gpadc.c
+++ b/drivers/iio/adc/da9150-gpadc.c
@@ -337,10 +337,8 @@ static int da9150_gpadc_probe(struct platform_device *pdev)
 	init_completion(&gpadc->complete);
 
 	irq = platform_get_irq_byname(pdev, "GPADC");
-	if (irq < 0) {
-		dev_err(dev, "Failed to get IRQ: %d\n", irq);
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_threaded_irq(dev, irq, NULL, da9150_gpadc_irq,
 					IRQF_ONESHOT, "GPADC", gpadc);
diff --git a/drivers/iio/adc/envelope-detector.c b/drivers/iio/adc/envelope-detector.c
index 2f2b563c1162..28f3d6758eb5 100644
--- a/drivers/iio/adc/envelope-detector.c
+++ b/drivers/iio/adc/envelope-detector.c
@@ -357,11 +357,8 @@ static int envelope_detector_probe(struct platform_device *pdev)
 	}
 
 	env->comp_irq = platform_get_irq_byname(pdev, "comp");
-	if (env->comp_irq < 0) {
-		if (env->comp_irq != -EPROBE_DEFER)
-			dev_err(dev, "failed to get compare interrupt\n");
+	if (env->comp_irq < 0)
 		return env->comp_irq;
-	}
 
 	ret = devm_request_irq(dev, env->comp_irq, envelope_detector_comp_isr,
 			       0, "envelope-detector", env);
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index d4c3ece21679..42a3ced11fbd 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -805,10 +805,8 @@ static int exynos_adc_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no irq resource?\n");
+	if (irq < 0)
 		return irq;
-	}
 	info->irq = irq;
 
 	irq = platform_get_irq(pdev, 1);
diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
index df19ecae52f7..fa71489195c6 100644
--- a/drivers/iio/adc/fsl-imx25-gcq.c
+++ b/drivers/iio/adc/fsl-imx25-gcq.c
@@ -340,7 +340,6 @@ static int mx25_gcq_probe(struct platform_device *pdev)
 
 	priv->irq = platform_get_irq(pdev, 0);
 	if (priv->irq <= 0) {
-		dev_err(dev, "Failed to get IRQ\n");
 		ret = priv->irq;
 		if (!ret)
 			ret = -ENXIO;
diff --git a/drivers/iio/adc/hi8435.c b/drivers/iio/adc/hi8435.c
index 35951c47004e..8da45bf36d36 100644
--- a/drivers/iio/adc/hi8435.c
+++ b/drivers/iio/adc/hi8435.c
@@ -456,6 +456,11 @@ err_read:
 	return IRQ_HANDLED;
 }
 
+static void hi8435_triggered_event_cleanup(void *data)
+{
+	iio_triggered_event_cleanup(data);
+}
+
 static int hi8435_probe(struct spi_device *spi)
 {
 	struct iio_dev *idev;
@@ -477,7 +482,7 @@ static int hi8435_probe(struct spi_device *spi)
 		hi8435_writeb(priv, HI8435_CTRL_REG, 0);
 	} else {
 		udelay(5);
-		gpiod_set_value(reset_gpio, 1);
+		gpiod_set_value_cansleep(reset_gpio, 1);
 	}
 
 	spi_set_drvdata(spi, idev);
@@ -513,27 +518,13 @@ static int hi8435_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	ret = iio_device_register(idev);
-	if (ret < 0) {
-		dev_err(&spi->dev, "unable to register device\n");
-		goto unregister_triggered_event;
-	}
-
-	return 0;
-
-unregister_triggered_event:
-	iio_triggered_event_cleanup(idev);
-	return ret;
-}
-
-static int hi8435_remove(struct spi_device *spi)
-{
-	struct iio_dev *idev = spi_get_drvdata(spi);
-
-	iio_device_unregister(idev);
-	iio_triggered_event_cleanup(idev);
+	ret = devm_add_action_or_reset(&spi->dev,
+				       hi8435_triggered_event_cleanup,
+				       idev);
+	if (ret)
+		return ret;
 
-	return 0;
+	return devm_iio_device_register(&spi->dev, idev);
 }
 
 static const struct of_device_id hi8435_dt_ids[] = {
@@ -554,7 +545,6 @@ static struct spi_driver hi8435_driver = {
 		.of_match_table	= of_match_ptr(hi8435_dt_ids),
 	},
 	.probe		= hi8435_probe,
-	.remove		= hi8435_remove,
 	.id_table	= hi8435_id,
 };
 module_spi_driver(hi8435_driver);
diff --git a/drivers/iio/adc/imx7d_adc.c b/drivers/iio/adc/imx7d_adc.c
index 26a7bbe4d534..2a2fbf788e95 100644
--- a/drivers/iio/adc/imx7d_adc.c
+++ b/drivers/iio/adc/imx7d_adc.c
@@ -492,10 +492,8 @@ static int imx7d_adc_probe(struct platform_device *pdev)
 		return PTR_ERR(info->regs);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "No irq resource?\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	info->clk = devm_clk_get(dev, "adc");
 	if (IS_ERR(info->clk)) {
diff --git a/drivers/iio/adc/lpc32xx_adc.c b/drivers/iio/adc/lpc32xx_adc.c
index a6ee1c3a9064..b896f7ff4572 100644
--- a/drivers/iio/adc/lpc32xx_adc.c
+++ b/drivers/iio/adc/lpc32xx_adc.c
@@ -172,10 +172,8 @@ static int lpc32xx_adc_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
-		dev_err(&pdev->dev, "failed getting interrupt resource\n");
+	if (irq <= 0)
 		return -ENXIO;
-	}
 
 	retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0,
 				  LPC32XXAD_NAME, st);
diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c
index 193b3b81de4d..910f3585fa54 100644
--- a/drivers/iio/adc/npcm_adc.c
+++ b/drivers/iio/adc/npcm_adc.c
@@ -225,7 +225,6 @@ static int npcm_adc_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq <= 0) {
-		dev_err(dev, "failed getting interrupt resource\n");
 		ret = -EINVAL;
 		goto err_disable_clk;
 	}
diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
index dd8299831e09..582ba047c4a6 100644
--- a/drivers/iio/adc/rockchip_saradc.c
+++ b/drivers/iio/adc/rockchip_saradc.c
@@ -244,10 +244,8 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 	init_completion(&info->completion);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no irq resource?\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_irq(&pdev->dev, irq, rockchip_saradc_isr,
 			       0, dev_name(&pdev->dev), info);
diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c
index f7f7a18904b4..c2203a46f0d8 100644
--- a/drivers/iio/adc/sc27xx_adc.c
+++ b/drivers/iio/adc/sc27xx_adc.c
@@ -504,88 +504,85 @@ static void sc27xx_adc_free_hwlock(void *_data)
 
 static int sc27xx_adc_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
 	struct sc27xx_adc_data *sc27xx_data;
 	struct iio_dev *indio_dev;
 	int ret;
 
-	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*sc27xx_data));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*sc27xx_data));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	sc27xx_data = iio_priv(indio_dev);
 
-	sc27xx_data->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	sc27xx_data->regmap = dev_get_regmap(dev->parent, NULL);
 	if (!sc27xx_data->regmap) {
-		dev_err(&pdev->dev, "failed to get ADC regmap\n");
+		dev_err(dev, "failed to get ADC regmap\n");
 		return -ENODEV;
 	}
 
 	ret = of_property_read_u32(np, "reg", &sc27xx_data->base);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to get ADC base address\n");
+		dev_err(dev, "failed to get ADC base address\n");
 		return ret;
 	}
 
 	sc27xx_data->irq = platform_get_irq(pdev, 0);
-	if (sc27xx_data->irq < 0) {
-		dev_err(&pdev->dev, "failed to get ADC irq number\n");
+	if (sc27xx_data->irq < 0)
 		return sc27xx_data->irq;
-	}
 
 	ret = of_hwspin_lock_get_id(np, 0);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to get hwspinlock id\n");
+		dev_err(dev, "failed to get hwspinlock id\n");
 		return ret;
 	}
 
 	sc27xx_data->hwlock = hwspin_lock_request_specific(ret);
 	if (!sc27xx_data->hwlock) {
-		dev_err(&pdev->dev, "failed to request hwspinlock\n");
+		dev_err(dev, "failed to request hwspinlock\n");
 		return -ENXIO;
 	}
 
-	ret = devm_add_action(&pdev->dev, sc27xx_adc_free_hwlock,
+	ret = devm_add_action_or_reset(dev, sc27xx_adc_free_hwlock,
 			      sc27xx_data->hwlock);
 	if (ret) {
-		sc27xx_adc_free_hwlock(sc27xx_data->hwlock);
-		dev_err(&pdev->dev, "failed to add hwspinlock action\n");
+		dev_err(dev, "failed to add hwspinlock action\n");
 		return ret;
 	}
 
 	init_completion(&sc27xx_data->completion);
-	sc27xx_data->dev = &pdev->dev;
+	sc27xx_data->dev = dev;
 
 	ret = sc27xx_adc_enable(sc27xx_data);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to enable ADC module\n");
+		dev_err(dev, "failed to enable ADC module\n");
 		return ret;
 	}
 
-	ret = devm_add_action(&pdev->dev, sc27xx_adc_disable, sc27xx_data);
+	ret = devm_add_action_or_reset(dev, sc27xx_adc_disable, sc27xx_data);
 	if (ret) {
-		sc27xx_adc_disable(sc27xx_data);
-		dev_err(&pdev->dev, "failed to add ADC disable action\n");
+		dev_err(dev, "failed to add ADC disable action\n");
 		return ret;
 	}
 
-	ret = devm_request_threaded_irq(&pdev->dev, sc27xx_data->irq, NULL,
+	ret = devm_request_threaded_irq(dev, sc27xx_data->irq, NULL,
 					sc27xx_adc_isr, IRQF_ONESHOT,
 					pdev->name, sc27xx_data);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to request ADC irq\n");
+		dev_err(dev, "failed to request ADC irq\n");
 		return ret;
 	}
 
-	indio_dev->dev.parent = &pdev->dev;
-	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->dev.parent = dev;
+	indio_dev->name = dev_name(dev);
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &sc27xx_info;
 	indio_dev->channels = sc27xx_channels;
 	indio_dev->num_channels = ARRAY_SIZE(sc27xx_channels);
-	ret = devm_iio_device_register(&pdev->dev, indio_dev);
+	ret = devm_iio_device_register(dev, indio_dev);
 	if (ret)
-		dev_err(&pdev->dev, "could not register iio (ADC)");
+		dev_err(dev, "could not register iio (ADC)");
 
 	return ret;
 }
diff --git a/drivers/iio/adc/spear_adc.c b/drivers/iio/adc/spear_adc.c
index a33d0a4cc088..592b97c464da 100644
--- a/drivers/iio/adc/spear_adc.c
+++ b/drivers/iio/adc/spear_adc.c
@@ -301,7 +301,6 @@ static int spear_adc_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq <= 0) {
-		dev_err(dev, "failed getting interrupt resource\n");
 		ret = -EINVAL;
 		goto errout2;
 	}
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 1f7ce5186dfc..9b85fefc0a96 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -14,9 +14,11 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/irqdesc.h>
 #include <linux/irqdomain.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 
@@ -51,6 +53,17 @@
 
 #define STM32_ADC_CORE_SLEEP_DELAY_MS	2000
 
+/* SYSCFG registers */
+#define STM32MP1_SYSCFG_PMCSETR		0x04
+#define STM32MP1_SYSCFG_PMCCLRR		0x44
+
+/* SYSCFG bit fields */
+#define STM32MP1_SYSCFG_ANASWVDD_MASK	BIT(9)
+
+/* SYSCFG capability flags */
+#define HAS_VBOOSTER		BIT(0)
+#define HAS_ANASWVDD		BIT(1)
+
 /**
  * stm32_adc_common_regs - stm32 common registers, compatible dependent data
  * @csr:	common status register offset
@@ -74,11 +87,13 @@ struct stm32_adc_priv;
  * @regs:	common registers for all instances
  * @clk_sel:	clock selection routine
  * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
+ * @has_syscfg: SYSCFG capability flags
  */
 struct stm32_adc_priv_cfg {
 	const struct stm32_adc_common_regs *regs;
 	int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
 	u32 max_clk_rate_hz;
+	unsigned int has_syscfg;
 };
 
 /**
@@ -87,22 +102,32 @@ struct stm32_adc_priv_cfg {
  * @domain:		irq domain reference
  * @aclk:		clock reference for the analog circuitry
  * @bclk:		bus clock common for all ADCs, depends on part used
+ * @booster:		booster supply reference
+ * @vdd:		vdd supply reference
  * @vdda:		vdda analog supply reference
  * @vref:		regulator reference
+ * @vdd_uv:		vdd supply voltage (microvolts)
+ * @vdda_uv:		vdda supply voltage (microvolts)
  * @cfg:		compatible configuration data
  * @common:		common data for all ADC instances
  * @ccr_bak:		backup CCR in low power mode
+ * @syscfg:		reference to syscon, system control registers
  */
 struct stm32_adc_priv {
 	int				irq[STM32_ADC_MAX_ADCS];
 	struct irq_domain		*domain;
 	struct clk			*aclk;
 	struct clk			*bclk;
+	struct regulator		*booster;
+	struct regulator		*vdd;
 	struct regulator		*vdda;
 	struct regulator		*vref;
+	int				vdd_uv;
+	int				vdda_uv;
 	const struct stm32_adc_priv_cfg	*cfg;
 	struct stm32_adc_common		common;
 	u32				ccr_bak;
+	struct regmap			*syscfg;
 };
 
 static struct stm32_adc_priv *to_stm32_adc_priv(struct stm32_adc_common *com)
@@ -349,7 +374,6 @@ static int stm32_adc_irq_probe(struct platform_device *pdev,
 			 */
 			if (i && priv->irq[i] == -ENXIO)
 				continue;
-			dev_err(&pdev->dev, "failed to get irq\n");
 
 			return priv->irq[i];
 		}
@@ -390,6 +414,82 @@ static void stm32_adc_irq_remove(struct platform_device *pdev,
 	}
 }
 
+static int stm32_adc_core_switches_supply_en(struct stm32_adc_priv *priv,
+					     struct device *dev)
+{
+	int ret;
+
+	/*
+	 * On STM32H7 and STM32MP1, the ADC inputs are multiplexed with analog
+	 * switches (via PCSEL) which have reduced performances when their
+	 * supply is below 2.7V (vdda by default):
+	 * - Voltage booster can be used, to get full ADC performances
+	 *   (increases power consumption).
+	 * - Vdd can be used to supply them, if above 2.7V (STM32MP1 only).
+	 *
+	 * Recommended settings for ANASWVDD and EN_BOOSTER:
+	 * - vdda < 2.7V but vdd > 2.7V: ANASWVDD = 1, EN_BOOSTER = 0 (stm32mp1)
+	 * - vdda < 2.7V and vdd < 2.7V: ANASWVDD = 0, EN_BOOSTER = 1
+	 * - vdda >= 2.7V:               ANASWVDD = 0, EN_BOOSTER = 0 (default)
+	 */
+	if (priv->vdda_uv < 2700000) {
+		if (priv->syscfg && priv->vdd_uv > 2700000) {
+			ret = regulator_enable(priv->vdd);
+			if (ret < 0) {
+				dev_err(dev, "vdd enable failed %d\n", ret);
+				return ret;
+			}
+
+			ret = regmap_write(priv->syscfg,
+					   STM32MP1_SYSCFG_PMCSETR,
+					   STM32MP1_SYSCFG_ANASWVDD_MASK);
+			if (ret < 0) {
+				regulator_disable(priv->vdd);
+				dev_err(dev, "vdd select failed, %d\n", ret);
+				return ret;
+			}
+			dev_dbg(dev, "analog switches supplied by vdd\n");
+
+			return 0;
+		}
+
+		if (priv->booster) {
+			/*
+			 * This is optional, as this is a trade-off between
+			 * analog performance and power consumption.
+			 */
+			ret = regulator_enable(priv->booster);
+			if (ret < 0) {
+				dev_err(dev, "booster enable failed %d\n", ret);
+				return ret;
+			}
+			dev_dbg(dev, "analog switches supplied by booster\n");
+
+			return 0;
+		}
+	}
+
+	/* Fallback using vdda (default), nothing to do */
+	dev_dbg(dev, "analog switches supplied by vdda (%d uV)\n",
+		priv->vdda_uv);
+
+	return 0;
+}
+
+static void stm32_adc_core_switches_supply_dis(struct stm32_adc_priv *priv)
+{
+	if (priv->vdda_uv < 2700000) {
+		if (priv->syscfg && priv->vdd_uv > 2700000) {
+			regmap_write(priv->syscfg, STM32MP1_SYSCFG_PMCCLRR,
+				     STM32MP1_SYSCFG_ANASWVDD_MASK);
+			regulator_disable(priv->vdd);
+			return;
+		}
+		if (priv->booster)
+			regulator_disable(priv->booster);
+	}
+}
+
 static int stm32_adc_core_hw_start(struct device *dev)
 {
 	struct stm32_adc_common *common = dev_get_drvdata(dev);
@@ -402,10 +502,21 @@ static int stm32_adc_core_hw_start(struct device *dev)
 		return ret;
 	}
 
+	ret = regulator_get_voltage(priv->vdda);
+	if (ret < 0) {
+		dev_err(dev, "vdda get voltage failed, %d\n", ret);
+		goto err_vdda_disable;
+	}
+	priv->vdda_uv = ret;
+
+	ret = stm32_adc_core_switches_supply_en(priv, dev);
+	if (ret < 0)
+		goto err_vdda_disable;
+
 	ret = regulator_enable(priv->vref);
 	if (ret < 0) {
 		dev_err(dev, "vref enable failed\n");
-		goto err_vdda_disable;
+		goto err_switches_dis;
 	}
 
 	if (priv->bclk) {
@@ -433,6 +544,8 @@ err_bclk_disable:
 		clk_disable_unprepare(priv->bclk);
 err_regulator_disable:
 	regulator_disable(priv->vref);
+err_switches_dis:
+	stm32_adc_core_switches_supply_dis(priv);
 err_vdda_disable:
 	regulator_disable(priv->vdda);
 
@@ -451,9 +564,80 @@ static void stm32_adc_core_hw_stop(struct device *dev)
 	if (priv->bclk)
 		clk_disable_unprepare(priv->bclk);
 	regulator_disable(priv->vref);
+	stm32_adc_core_switches_supply_dis(priv);
 	regulator_disable(priv->vdda);
 }
 
+static int stm32_adc_core_switches_probe(struct device *dev,
+					 struct stm32_adc_priv *priv)
+{
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	/* Analog switches supply can be controlled by syscfg (optional) */
+	priv->syscfg = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+	if (IS_ERR(priv->syscfg)) {
+		ret = PTR_ERR(priv->syscfg);
+		if (ret != -ENODEV) {
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Can't probe syscfg: %d\n", ret);
+			return ret;
+		}
+		priv->syscfg = NULL;
+	}
+
+	/* Booster can be used to supply analog switches (optional) */
+	if (priv->cfg->has_syscfg & HAS_VBOOSTER &&
+	    of_property_read_bool(np, "booster-supply")) {
+		priv->booster = devm_regulator_get_optional(dev, "booster");
+		if (IS_ERR(priv->booster)) {
+			ret = PTR_ERR(priv->booster);
+			if (ret != -ENODEV) {
+				if (ret != -EPROBE_DEFER)
+					dev_err(dev, "can't get booster %d\n",
+						ret);
+				return ret;
+			}
+			priv->booster = NULL;
+		}
+	}
+
+	/* Vdd can be used to supply analog switches (optional) */
+	if (priv->cfg->has_syscfg & HAS_ANASWVDD &&
+	    of_property_read_bool(np, "vdd-supply")) {
+		priv->vdd = devm_regulator_get_optional(dev, "vdd");
+		if (IS_ERR(priv->vdd)) {
+			ret = PTR_ERR(priv->vdd);
+			if (ret != -ENODEV) {
+				if (ret != -EPROBE_DEFER)
+					dev_err(dev, "can't get vdd %d\n", ret);
+				return ret;
+			}
+			priv->vdd = NULL;
+		}
+	}
+
+	if (priv->vdd) {
+		ret = regulator_enable(priv->vdd);
+		if (ret < 0) {
+			dev_err(dev, "vdd enable failed %d\n", ret);
+			return ret;
+		}
+
+		ret = regulator_get_voltage(priv->vdd);
+		if (ret < 0) {
+			dev_err(dev, "vdd get voltage failed %d\n", ret);
+			regulator_disable(priv->vdd);
+			return ret;
+		}
+		priv->vdd_uv = ret;
+
+		regulator_disable(priv->vdd);
+	}
+
+	return 0;
+}
+
 static int stm32_adc_probe(struct platform_device *pdev)
 {
 	struct stm32_adc_priv *priv;
@@ -514,6 +698,10 @@ static int stm32_adc_probe(struct platform_device *pdev)
 		priv->bclk = NULL;
 	}
 
+	ret = stm32_adc_core_switches_probe(dev, priv);
+	if (ret)
+		return ret;
+
 	pm_runtime_get_noresume(dev);
 	pm_runtime_set_active(dev);
 	pm_runtime_set_autosuspend_delay(dev, STM32_ADC_CORE_SLEEP_DELAY_MS);
@@ -611,12 +799,14 @@ static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
 	.regs = &stm32h7_adc_common_regs,
 	.clk_sel = stm32h7_adc_clk_sel,
 	.max_clk_rate_hz = 36000000,
+	.has_syscfg = HAS_VBOOSTER,
 };
 
 static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
 	.regs = &stm32h7_adc_common_regs,
 	.clk_sel = stm32h7_adc_clk_sel,
 	.max_clk_rate_hz = 40000000,
+	.has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD,
 };
 
 static const struct of_device_id stm32_adc_of_match[] = {
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 205e1699f954..6a7dd08b1e0b 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1919,10 +1919,8 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	}
 
 	adc->irq = platform_get_irq(pdev, 0);
-	if (adc->irq < 0) {
-		dev_err(&pdev->dev, "failed to get irq\n");
+	if (adc->irq < 0)
 		return adc->irq;
-	}
 
 	ret = devm_request_irq(&pdev->dev, adc->irq, stm32_adc_isr,
 			       0, pdev->name, adc);
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index ee1e0569d0e1..e493242c266e 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -1601,11 +1601,8 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
 	 * So IRQ associated to filter instance 0 is dedicated to the Filter 0.
 	 */
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		if (irq != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get IRQ: %d\n", irq);
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_irq(dev, irq, stm32_dfsdm_irq,
 			       0, pdev->name, adc);
diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index f13c6248a662..176e1cb4abb1 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -460,10 +460,8 @@ static int sun4i_irq_init(struct platform_device *pdev, const char *name,
 	atomic_set(atomic, 1);
 
 	ret = platform_get_irq_byname(pdev, name);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "no %s interrupt registered\n", name);
+	if (ret < 0)
 		return ret;
-	}
 
 	ret = regmap_irq_get_virq(mfd_dev->regmap_irqc, ret);
 	if (ret < 0) {
diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c
index 2fa6ec83bb13..f24148bd15de 100644
--- a/drivers/iio/adc/twl6030-gpadc.c
+++ b/drivers/iio/adc/twl6030-gpadc.c
@@ -905,10 +905,8 @@ static int twl6030_gpadc_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "failed to get irq\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_threaded_irq(dev, irq, NULL,
 				twl6030_gpadc_irq_handler,
diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
index 41d3621c4787..98b30475bbc6 100644
--- a/drivers/iio/adc/vf610_adc.c
+++ b/drivers/iio/adc/vf610_adc.c
@@ -821,10 +821,8 @@ static int vf610_adc_probe(struct platform_device *pdev)
 		return PTR_ERR(info->regs);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no irq resource?\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_irq(info->dev, irq,
 				vf610_adc_isr, 0,
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
index 17af4e0fd5f8..6a4919cd83c3 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -63,10 +63,35 @@ static int cros_ec_sensors_read(struct iio_dev *indio_dev,
 
 		/* Save values */
 		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
-			st->core.calib[i] =
+			st->core.calib[i].offset =
 				st->core.resp->sensor_offset.offset[i];
 		ret = IIO_VAL_INT;
-		*val = st->core.calib[idx];
+		*val = st->core.calib[idx].offset;
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_SCALE;
+		st->core.param.sensor_offset.flags = 0;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret == -EPROTO) {
+			/* Reading calibscale is not supported on older EC. */
+			*val = 1;
+			*val2 = 0;
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		} else if (ret) {
+			break;
+		}
+
+		/* Save values */
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.calib[i].scale =
+				st->core.resp->sensor_scale.scale[i];
+
+		*val = st->core.calib[idx].scale >> 15;
+		*val2 = ((st->core.calib[idx].scale & 0x7FFF) * 1000000LL) /
+			MOTION_SENSE_DEFAULT_SCALE;
+		ret = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_SCALE:
 		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
@@ -134,7 +159,7 @@ static int cros_ec_sensors_write(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_CALIBBIAS:
-		st->core.calib[idx] = val;
+		st->core.calib[idx].offset = val;
 
 		/* Send to EC for each axis, even if not complete */
 		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
@@ -142,12 +167,27 @@ static int cros_ec_sensors_write(struct iio_dev *indio_dev,
 			MOTION_SENSE_SET_OFFSET;
 		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
 			st->core.param.sensor_offset.offset[i] =
-				st->core.calib[i];
+				st->core.calib[i].offset;
 		st->core.param.sensor_offset.temp =
 			EC_MOTION_SENSE_INVALID_CALIB_TEMP;
 
 		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
 		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		st->core.calib[idx].scale = val;
+		/* Send to EC for each axis, even if not complete */
+
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_SCALE;
+		st->core.param.sensor_offset.flags =
+			MOTION_SENSE_SET_OFFSET;
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.param.sensor_scale.scale[i] =
+				st->core.calib[i].scale;
+		st->core.param.sensor_scale.temp =
+			EC_MOTION_SENSE_INVALID_CALIB_TEMP;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		break;
 	case IIO_CHAN_INFO_SCALE:
 		if (st->core.type == MOTIONSENSE_TYPE_MAG) {
 			ret = -EINVAL;
@@ -175,6 +215,7 @@ static int cros_ec_sensors_write(struct iio_dev *indio_dev,
 static const struct iio_info ec_sensors_info = {
 	.read_raw = &cros_ec_sensors_read,
 	.write_raw = &cros_ec_sensors_write,
+	.read_avail = &cros_ec_sensors_core_read_avail,
 };
 
 static int cros_ec_sensors_probe(struct platform_device *pdev)
@@ -206,11 +247,14 @@ static int cros_ec_sensors_probe(struct platform_device *pdev)
 		/* Common part */
 		channel->info_mask_separate =
 			BIT(IIO_CHAN_INFO_RAW) |
-			BIT(IIO_CHAN_INFO_CALIBBIAS);
+			BIT(IIO_CHAN_INFO_CALIBBIAS) |
+			BIT(IIO_CHAN_INFO_CALIBSCALE);
 		channel->info_mask_shared_by_all =
 			BIT(IIO_CHAN_INFO_SCALE) |
 			BIT(IIO_CHAN_INFO_FREQUENCY) |
 			BIT(IIO_CHAN_INFO_SAMP_FREQ);
+		channel->info_mask_shared_by_all_available =
+			BIT(IIO_CHAN_INFO_SAMP_FREQ);
 		channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
 		channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
 		channel->scan_index = i;
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index 130362ca421b..fd833295bb17 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -25,6 +25,62 @@ static char *cros_ec_loc[] = {
 	[MOTIONSENSE_LOC_MAX] = "unknown",
 };
 
+static int cros_ec_get_host_cmd_version_mask(struct cros_ec_device *ec_dev,
+					     u16 cmd_offset, u16 cmd, u32 *mask)
+{
+	int ret;
+	struct {
+		struct cros_ec_command msg;
+		union {
+			struct ec_params_get_cmd_versions params;
+			struct ec_response_get_cmd_versions resp;
+		};
+	} __packed buf = {
+		.msg = {
+			.command = EC_CMD_GET_CMD_VERSIONS + cmd_offset,
+			.insize = sizeof(struct ec_response_get_cmd_versions),
+			.outsize = sizeof(struct ec_params_get_cmd_versions)
+			},
+		.params = {.cmd = cmd}
+	};
+
+	ret = cros_ec_cmd_xfer_status(ec_dev, &buf.msg);
+	if (ret >= 0)
+		*mask = buf.resp.version_mask;
+	return ret;
+}
+
+static void get_default_min_max_freq(enum motionsensor_type type,
+				     u32 *min_freq,
+				     u32 *max_freq)
+{
+	switch (type) {
+	case MOTIONSENSE_TYPE_ACCEL:
+	case MOTIONSENSE_TYPE_GYRO:
+		*min_freq = 12500;
+		*max_freq = 100000;
+		break;
+	case MOTIONSENSE_TYPE_MAG:
+		*min_freq = 5000;
+		*max_freq = 25000;
+		break;
+	case MOTIONSENSE_TYPE_PROX:
+	case MOTIONSENSE_TYPE_LIGHT:
+		*min_freq = 100;
+		*max_freq = 50000;
+		break;
+	case MOTIONSENSE_TYPE_BARO:
+		*min_freq = 250;
+		*max_freq = 20000;
+		break;
+	case MOTIONSENSE_TYPE_ACTIVITY:
+	default:
+		*min_freq = 0;
+		*max_freq = 0;
+		break;
+	}
+}
+
 int cros_ec_sensors_core_init(struct platform_device *pdev,
 			      struct iio_dev *indio_dev,
 			      bool physical_device)
@@ -33,6 +89,8 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
 	struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
 	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
+	u32 ver_mask;
+	int ret;
 
 	platform_set_drvdata(pdev, indio_dev);
 
@@ -47,8 +105,15 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 
 	mutex_init(&state->cmd_lock);
 
+	ret = cros_ec_get_host_cmd_version_mask(state->ec,
+						ec->cmd_offset,
+						EC_CMD_MOTION_SENSE_CMD,
+						&ver_mask);
+	if (ret < 0)
+		return ret;
+
 	/* Set up the host command structure. */
-	state->msg->version = 2;
+	state->msg->version = fls(ver_mask) - 1;
 	state->msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
 	state->msg->outsize = sizeof(struct ec_params_motion_sense);
 
@@ -60,12 +125,29 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 
 		state->param.cmd = MOTIONSENSE_CMD_INFO;
 		state->param.info.sensor_num = sensor_platform->sensor_num;
-		if (cros_ec_motion_send_host_cmd(state, 0)) {
+		ret = cros_ec_motion_send_host_cmd(state, 0);
+		if (ret) {
 			dev_warn(dev, "Can not access sensor info\n");
-			return -EIO;
+			return ret;
 		}
 		state->type = state->resp->info.type;
 		state->loc = state->resp->info.location;
+
+		/* Set sign vector, only used for backward compatibility. */
+		memset(state->sign, 1, CROS_EC_SENSOR_MAX_AXIS);
+
+		/* 0 is a correct value used to stop the device */
+		state->frequencies[0] = 0;
+		if (state->msg->version < 3) {
+			get_default_min_max_freq(state->resp->info.type,
+						 &state->frequencies[1],
+						 &state->frequencies[2]);
+		} else {
+			state->frequencies[1] =
+			    state->resp->info_3.min_frequency;
+			state->frequencies[2] =
+			    state->resp->info_3.max_frequency;
+		}
 	}
 
 	return 0;
@@ -86,7 +168,7 @@ int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *state,
 
 	ret = cros_ec_cmd_xfer_status(state->ec, state->msg);
 	if (ret < 0)
-		return -EIO;
+		return ret;
 
 	if (ret &&
 	    state->resp != (struct ec_response_motion_sense *)state->msg->data)
@@ -118,7 +200,7 @@ static ssize_t cros_ec_sensors_calibrate(struct iio_dev *indio_dev,
 	} else {
 		/* Save values */
 		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
-			st->calib[i] = st->resp->perform_calib.offset[i];
+			st->calib[i].offset = st->resp->perform_calib.offset[i];
 	}
 	mutex_unlock(&st->cmd_lock);
 
@@ -268,6 +350,7 @@ static int cros_ec_sensors_read_data_unsafe(struct iio_dev *indio_dev,
 		if (ret < 0)
 			return ret;
 
+		*data *= st->sign[i];
 		data++;
 	}
 
@@ -396,7 +479,7 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
 			  struct iio_chan_spec const *chan,
 			  int *val, int *val2, long mask)
 {
-	int ret = IIO_VAL_INT;
+	int ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
@@ -404,22 +487,27 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
 		st->param.ec_rate.data =
 			EC_MOTION_SENSE_NO_VALUE;
 
-		if (cros_ec_motion_send_host_cmd(st, 0))
-			ret = -EIO;
-		else
-			*val = st->resp->ec_rate.ret;
+		ret = cros_ec_motion_send_host_cmd(st, 0);
+		if (ret)
+			break;
+
+		*val = st->resp->ec_rate.ret;
+		ret = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_FREQUENCY:
 		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
 		st->param.sensor_odr.data =
 			EC_MOTION_SENSE_NO_VALUE;
 
-		if (cros_ec_motion_send_host_cmd(st, 0))
-			ret = -EIO;
-		else
-			*val = st->resp->sensor_odr.ret;
+		ret = cros_ec_motion_send_host_cmd(st, 0);
+		if (ret)
+			break;
+
+		*val = st->resp->sensor_odr.ret;
+		ret = IIO_VAL_INT;
 		break;
 	default:
+		ret = -EINVAL;
 		break;
 	}
 
@@ -427,11 +515,32 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
 }
 EXPORT_SYMBOL_GPL(cros_ec_sensors_core_read);
 
+int cros_ec_sensors_core_read_avail(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan,
+				    const int **vals,
+				    int *type,
+				    int *length,
+				    long mask)
+{
+	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*length = ARRAY_SIZE(state->frequencies);
+		*vals = (const int *)&state->frequencies;
+		*type = IIO_VAL_INT;
+		return IIO_AVAIL_LIST;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_read_avail);
+
 int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
 			       struct iio_chan_spec const *chan,
 			       int val, int val2, long mask)
 {
-	int ret = 0;
+	int ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_FREQUENCY:
@@ -441,17 +550,16 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
 		/* Always roundup, so caller gets at least what it asks for. */
 		st->param.sensor_odr.roundup = 1;
 
-		if (cros_ec_motion_send_host_cmd(st, 0))
-			ret = -EIO;
+		ret = cros_ec_motion_send_host_cmd(st, 0);
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
 		st->param.ec_rate.data = val;
 
-		if (cros_ec_motion_send_host_cmd(st, 0))
-			ret = -EIO;
-		else
-			st->curr_sampl_freq = val;
+		ret = cros_ec_motion_send_host_cmd(st, 0);
+		if (ret)
+			break;
+		st->curr_sampl_freq = val;
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c
index 4a68669dc555..eee30130ae23 100644
--- a/drivers/iio/common/st_sensors/st_sensors_buffer.c
+++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c
@@ -17,15 +17,16 @@
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
 #include <linux/irqreturn.h>
+#include <linux/regmap.h>
 
 #include <linux/iio/common/st_sensors.h>
 
 
 static int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
 {
-	int i;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 	unsigned int num_data_channels = sdata->num_data_channels;
+	int i;
 
 	for_each_set_bit(i, indio_dev->active_scan_mask, num_data_channels) {
 		const struct iio_chan_spec *channel = &indio_dev->channels[i];
@@ -36,11 +37,8 @@ static int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf)
 			channel->scan_type.storagebits >> 3;
 
 		buf = PTR_ALIGN(buf, storage_bytes);
-		if (sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev,
-						  channel->address,
-						  bytes_to_read, buf,
-						  sdata->multiread_bit) <
-		    bytes_to_read)
+		if (regmap_bulk_read(sdata->regmap, channel->address,
+				     buf, bytes_to_read) < 0)
 			return -EIO;
 
 		/* Advance the buffer pointer */
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 8b22dc241482..4a3064fb6cd9 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -15,6 +15,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/regmap.h>
 #include <asm/unaligned.h>
 #include <linux/iio/common/st_sensors.h>
 
@@ -28,19 +29,10 @@ static inline u32 st_sensors_get_unaligned_le24(const u8 *p)
 int st_sensors_write_data_with_mask(struct iio_dev *indio_dev,
 				    u8 reg_addr, u8 mask, u8 data)
 {
-	int err;
-	u8 new_data;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
-	err = sdata->tf->read_byte(&sdata->tb, sdata->dev, reg_addr, &new_data);
-	if (err < 0)
-		goto st_sensors_write_data_with_mask_error;
-
-	new_data = ((new_data & (~mask)) | ((data << __ffs(mask)) & mask));
-	err = sdata->tf->write_byte(&sdata->tb, sdata->dev, reg_addr, new_data);
-
-st_sensors_write_data_with_mask_error:
-	return err;
+	return regmap_update_bits(sdata->regmap,
+				  reg_addr, mask, data << __ffs(mask));
 }
 
 int st_sensors_debugfs_reg_access(struct iio_dev *indio_dev,
@@ -48,19 +40,15 @@ int st_sensors_debugfs_reg_access(struct iio_dev *indio_dev,
 				  unsigned *readval)
 {
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
-	u8 readdata;
 	int err;
 
 	if (!readval)
-		return sdata->tf->write_byte(&sdata->tb, sdata->dev,
-					     (u8)reg, (u8)writeval);
+		return regmap_write(sdata->regmap, reg, writeval);
 
-	err = sdata->tf->read_byte(&sdata->tb, sdata->dev, (u8)reg, &readdata);
+	err = regmap_read(sdata->regmap, reg, readval);
 	if (err < 0)
 		return err;
 
-	*readval = (unsigned)readdata;
-
 	return 0;
 }
 EXPORT_SYMBOL(st_sensors_debugfs_reg_access);
@@ -545,7 +533,7 @@ st_sensors_match_scale_error:
 EXPORT_SYMBOL(st_sensors_set_fullscale_by_gain);
 
 static int st_sensors_read_axis_data(struct iio_dev *indio_dev,
-				struct iio_chan_spec const *ch, int *data)
+				     struct iio_chan_spec const *ch, int *data)
 {
 	int err;
 	u8 *outdata;
@@ -554,13 +542,12 @@ static int st_sensors_read_axis_data(struct iio_dev *indio_dev,
 
 	byte_for_channel = DIV_ROUND_UP(ch->scan_type.realbits +
 					ch->scan_type.shift, 8);
-	outdata = kmalloc(byte_for_channel, GFP_KERNEL);
+	outdata = kmalloc(byte_for_channel, GFP_DMA | GFP_KERNEL);
 	if (!outdata)
 		return -ENOMEM;
 
-	err = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev,
-				ch->address, byte_for_channel,
-				outdata, sdata->multiread_bit);
+	err = regmap_bulk_read(sdata->regmap, ch->address,
+			       outdata, byte_for_channel);
 	if (err < 0)
 		goto st_sensors_free_memory;
 
@@ -608,69 +595,55 @@ out:
 }
 EXPORT_SYMBOL(st_sensors_read_info_raw);
 
-static int st_sensors_init_interface_mode(struct iio_dev *indio_dev,
-			const struct st_sensor_settings *sensor_settings)
+/*
+ * st_sensors_get_settings_index() - get index of the sensor settings for a
+ *				     specific device from list of settings
+ * @name: device name buffer reference.
+ * @list: sensor settings list.
+ * @list_length: length of sensor settings list.
+ *
+ * Return: non negative number on success (valid index),
+ *	   negative error code otherwise.
+ */
+int st_sensors_get_settings_index(const char *name,
+				  const struct st_sensor_settings *list,
+				  const int list_length)
 {
-	struct st_sensor_data *sdata = iio_priv(indio_dev);
-	struct device_node *np = sdata->dev->of_node;
-	struct st_sensors_platform_data *pdata;
+	int i, n;
 
-	pdata = (struct st_sensors_platform_data *)sdata->dev->platform_data;
-	if (((np && of_property_read_bool(np, "spi-3wire")) ||
-	     (pdata && pdata->spi_3wire)) && sensor_settings->sim.addr) {
-		int err;
-
-		err = sdata->tf->write_byte(&sdata->tb, sdata->dev,
-					    sensor_settings->sim.addr,
-					    sensor_settings->sim.value);
-		if (err < 0) {
-			dev_err(&indio_dev->dev,
-				"failed to init interface mode\n");
-			return err;
+	for (i = 0; i < list_length; i++) {
+		for (n = 0; n < ST_SENSORS_MAX_4WAI; n++) {
+			if (strcmp(name, list[i].sensors_supported[n]) == 0)
+				return i;
 		}
 	}
 
-	return 0;
+	return -ENODEV;
 }
+EXPORT_SYMBOL(st_sensors_get_settings_index);
 
-int st_sensors_check_device_support(struct iio_dev *indio_dev,
-			int num_sensors_list,
-			const struct st_sensor_settings *sensor_settings)
+/*
+ * st_sensors_verify_id() - verify sensor ID (WhoAmI) is matching with the
+ *			    expected value
+ * @indio_dev: IIO device reference.
+ *
+ * Return: 0 on success (valid sensor ID), else a negative error code.
+ */
+int st_sensors_verify_id(struct iio_dev *indio_dev)
 {
-	int i, n, err = 0;
-	u8 wai;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	int wai, err;
 
-	for (i = 0; i < num_sensors_list; i++) {
-		for (n = 0; n < ST_SENSORS_MAX_4WAI; n++) {
-			if (strcmp(indio_dev->name,
-				sensor_settings[i].sensors_supported[n]) == 0) {
-				break;
-			}
-		}
-		if (n < ST_SENSORS_MAX_4WAI)
-			break;
-	}
-	if (i == num_sensors_list) {
-		dev_err(&indio_dev->dev, "device name %s not recognized.\n",
-							indio_dev->name);
-		return -ENODEV;
-	}
-
-	err = st_sensors_init_interface_mode(indio_dev, &sensor_settings[i]);
-	if (err < 0)
-		return err;
-
-	if (sensor_settings[i].wai_addr) {
-		err = sdata->tf->read_byte(&sdata->tb, sdata->dev,
-					   sensor_settings[i].wai_addr, &wai);
+	if (sdata->sensor_settings->wai_addr) {
+		err = regmap_read(sdata->regmap,
+				  sdata->sensor_settings->wai_addr, &wai);
 		if (err < 0) {
 			dev_err(&indio_dev->dev,
 				"failed to read Who-Am-I register.\n");
 			return err;
 		}
 
-		if (sensor_settings[i].wai != wai) {
+		if (sdata->sensor_settings->wai != wai) {
 			dev_err(&indio_dev->dev,
 				"%s: WhoAmI mismatch (0x%x).\n",
 				indio_dev->name, wai);
@@ -678,12 +651,9 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev,
 		}
 	}
 
-	sdata->sensor_settings =
-			(struct st_sensor_settings *)&sensor_settings[i];
-
-	return i;
+	return 0;
 }
-EXPORT_SYMBOL(st_sensors_check_device_support);
+EXPORT_SYMBOL(st_sensors_verify_id);
 
 ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
 				struct device_attribute *attr, char *buf)
diff --git a/drivers/iio/common/st_sensors/st_sensors_i2c.c b/drivers/iio/common/st_sensors/st_sensors_i2c.c
index b1c9812407e7..aa89d54a7c59 100644
--- a/drivers/iio/common/st_sensors/st_sensors_i2c.c
+++ b/drivers/iio/common/st_sensors/st_sensors_i2c.c
@@ -13,68 +13,58 @@
 #include <linux/iio/iio.h>
 #include <linux/of_device.h>
 #include <linux/acpi.h>
+#include <linux/regmap.h>
 
 #include <linux/iio/common/st_sensors_i2c.h>
 
 
 #define ST_SENSORS_I2C_MULTIREAD	0x80
 
-static unsigned int st_sensors_i2c_get_irq(struct iio_dev *indio_dev)
-{
-	struct st_sensor_data *sdata = iio_priv(indio_dev);
-
-	return to_i2c_client(sdata->dev)->irq;
-}
-
-static int st_sensors_i2c_read_byte(struct st_sensor_transfer_buffer *tb,
-				struct device *dev, u8 reg_addr, u8 *res_byte)
-{
-	int err;
-
-	err = i2c_smbus_read_byte_data(to_i2c_client(dev), reg_addr);
-	if (err < 0)
-		goto st_accel_i2c_read_byte_error;
-
-	*res_byte = err & 0xff;
-
-st_accel_i2c_read_byte_error:
-	return err < 0 ? err : 0;
-}
-
-static int st_sensors_i2c_read_multiple_byte(
-		struct st_sensor_transfer_buffer *tb, struct device *dev,
-			u8 reg_addr, int len, u8 *data, bool multiread_bit)
-{
-	if (multiread_bit)
-		reg_addr |= ST_SENSORS_I2C_MULTIREAD;
-
-	return i2c_smbus_read_i2c_block_data_or_emulated(to_i2c_client(dev),
-							 reg_addr, len, data);
-}
-
-static int st_sensors_i2c_write_byte(struct st_sensor_transfer_buffer *tb,
-				struct device *dev, u8 reg_addr, u8 data)
-{
-	return i2c_smbus_write_byte_data(to_i2c_client(dev), reg_addr, data);
-}
+static const struct regmap_config st_sensors_i2c_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
 
-static const struct st_sensor_transfer_function st_sensors_tf_i2c = {
-	.read_byte = st_sensors_i2c_read_byte,
-	.write_byte = st_sensors_i2c_write_byte,
-	.read_multiple_byte = st_sensors_i2c_read_multiple_byte,
+static const struct regmap_config st_sensors_i2c_regmap_multiread_bit_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.read_flag_mask = ST_SENSORS_I2C_MULTIREAD,
 };
 
-void st_sensors_i2c_configure(struct iio_dev *indio_dev,
-		struct i2c_client *client, struct st_sensor_data *sdata)
+/*
+ * st_sensors_i2c_configure() - configure I2C interface
+ * @indio_dev: IIO device reference.
+ * @client: i2c client reference.
+ *
+ * Return: 0 on success, else a negative error code.
+ */
+int st_sensors_i2c_configure(struct iio_dev *indio_dev,
+			     struct i2c_client *client)
 {
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	const struct regmap_config *config;
+
+	if (sdata->sensor_settings->multi_read_bit)
+		config = &st_sensors_i2c_regmap_multiread_bit_config;
+	else
+		config = &st_sensors_i2c_regmap_config;
+
+	sdata->regmap = devm_regmap_init_i2c(client, config);
+	if (IS_ERR(sdata->regmap)) {
+		dev_err(&client->dev, "Failed to register i2c regmap (%d)\n",
+			(int)PTR_ERR(sdata->regmap));
+		return PTR_ERR(sdata->regmap);
+	}
+
 	i2c_set_clientdata(client, indio_dev);
 
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->name = client->name;
 
 	sdata->dev = &client->dev;
-	sdata->tf = &st_sensors_tf_i2c;
-	sdata->get_irq_data_ready = st_sensors_i2c_get_irq;
+	sdata->irq = client->irq;
+
+	return 0;
 }
 EXPORT_SYMBOL(st_sensors_i2c_configure);
 
diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c
index 2213843f02cb..2262f81b07c2 100644
--- a/drivers/iio/common/st_sensors/st_sensors_spi.c
+++ b/drivers/iio/common/st_sensors/st_sensors_spi.c
@@ -11,108 +11,108 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/iio/iio.h>
+#include <linux/regmap.h>
 
 #include <linux/iio/common/st_sensors_spi.h>
-
+#include "st_sensors_core.h"
 
 #define ST_SENSORS_SPI_MULTIREAD	0xc0
-#define ST_SENSORS_SPI_READ		0x80
 
-static unsigned int st_sensors_spi_get_irq(struct iio_dev *indio_dev)
-{
-	struct st_sensor_data *sdata = iio_priv(indio_dev);
+static const struct regmap_config st_sensors_spi_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
 
-	return to_spi_device(sdata->dev)->irq;
-}
+static const struct regmap_config st_sensors_spi_regmap_multiread_bit_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.read_flag_mask = ST_SENSORS_SPI_MULTIREAD,
+};
 
-static int st_sensors_spi_read(struct st_sensor_transfer_buffer *tb,
-	struct device *dev, u8 reg_addr, int len, u8 *data, bool multiread_bit)
+/*
+ * st_sensors_is_spi_3_wire() - check if SPI 3-wire mode has been selected
+ * @spi: spi device reference.
+ *
+ * Return: true if SPI 3-wire mode is selected, false otherwise.
+ */
+static bool st_sensors_is_spi_3_wire(struct spi_device *spi)
 {
-	int err;
-
-	struct spi_transfer xfers[] = {
-		{
-			.tx_buf = tb->tx_buf,
-			.bits_per_word = 8,
-			.len = 1,
-		},
-		{
-			.rx_buf = tb->rx_buf,
-			.bits_per_word = 8,
-			.len = len,
-		}
-	};
-
-	mutex_lock(&tb->buf_lock);
-	if ((multiread_bit) && (len > 1))
-		tb->tx_buf[0] = reg_addr | ST_SENSORS_SPI_MULTIREAD;
-	else
-		tb->tx_buf[0] = reg_addr | ST_SENSORS_SPI_READ;
+	struct device_node *np = spi->dev.of_node;
+	struct st_sensors_platform_data *pdata;
 
-	err = spi_sync_transfer(to_spi_device(dev), xfers, ARRAY_SIZE(xfers));
-	if (err)
-		goto acc_spi_read_error;
+	pdata = (struct st_sensors_platform_data *)spi->dev.platform_data;
+	if ((np && of_property_read_bool(np, "spi-3wire")) ||
+	    (pdata && pdata->spi_3wire)) {
+		return true;
+	}
 
-	memcpy(data, tb->rx_buf, len);
-	mutex_unlock(&tb->buf_lock);
-	return len;
-
-acc_spi_read_error:
-	mutex_unlock(&tb->buf_lock);
-	return err;
+	return false;
 }
 
-static int st_sensors_spi_read_byte(struct st_sensor_transfer_buffer *tb,
-				struct device *dev, u8 reg_addr, u8 *res_byte)
+/*
+ * st_sensors_configure_spi_3_wire() - configure SPI 3-wire if needed
+ * @spi: spi device reference.
+ * @settings: sensor specific settings reference.
+ *
+ * Return: 0 on success, else a negative error code.
+ */
+static int st_sensors_configure_spi_3_wire(struct spi_device *spi,
+					   struct st_sensor_settings *settings)
 {
-	return st_sensors_spi_read(tb, dev, reg_addr, 1, res_byte, false);
-}
+	if (settings->sim.addr) {
+		u8 buffer[] = {
+			settings->sim.addr,
+			settings->sim.value
+		};
 
-static int st_sensors_spi_read_multiple_byte(
-	struct st_sensor_transfer_buffer *tb, struct device *dev,
-			u8 reg_addr, int len, u8 *data, bool multiread_bit)
-{
-	return st_sensors_spi_read(tb, dev, reg_addr, len, data, multiread_bit);
+		return spi_write(spi, buffer, 2);
+	}
+
+	return 0;
 }
 
-static int st_sensors_spi_write_byte(struct st_sensor_transfer_buffer *tb,
-				struct device *dev, u8 reg_addr, u8 data)
+/*
+ * st_sensors_spi_configure() - configure SPI interface
+ * @indio_dev: IIO device reference.
+ * @spi: spi device reference.
+ *
+ * Return: 0 on success, else a negative error code.
+ */
+int st_sensors_spi_configure(struct iio_dev *indio_dev,
+			     struct spi_device *spi)
 {
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	const struct regmap_config *config;
 	int err;
 
-	struct spi_transfer xfers = {
-		.tx_buf = tb->tx_buf,
-		.bits_per_word = 8,
-		.len = 2,
-	};
+	if (st_sensors_is_spi_3_wire(spi)) {
+		err = st_sensors_configure_spi_3_wire(spi,
+						      sdata->sensor_settings);
+		if (err < 0)
+			return err;
+	}
 
-	mutex_lock(&tb->buf_lock);
-	tb->tx_buf[0] = reg_addr;
-	tb->tx_buf[1] = data;
-
-	err = spi_sync_transfer(to_spi_device(dev), &xfers, 1);
-	mutex_unlock(&tb->buf_lock);
+	if (sdata->sensor_settings->multi_read_bit)
+		config = &st_sensors_spi_regmap_multiread_bit_config;
+	else
+		config = &st_sensors_spi_regmap_config;
 
-	return err;
-}
+	sdata->regmap = devm_regmap_init_spi(spi, config);
+	if (IS_ERR(sdata->regmap)) {
+		dev_err(&spi->dev, "Failed to register spi regmap (%d)\n",
+			(int)PTR_ERR(sdata->regmap));
+		return PTR_ERR(sdata->regmap);
+	}
 
-static const struct st_sensor_transfer_function st_sensors_tf_spi = {
-	.read_byte = st_sensors_spi_read_byte,
-	.write_byte = st_sensors_spi_write_byte,
-	.read_multiple_byte = st_sensors_spi_read_multiple_byte,
-};
-
-void st_sensors_spi_configure(struct iio_dev *indio_dev,
-			struct spi_device *spi, struct st_sensor_data *sdata)
-{
 	spi_set_drvdata(spi, indio_dev);
 
 	indio_dev->dev.parent = &spi->dev;
 	indio_dev->name = spi->modalias;
 
 	sdata->dev = &spi->dev;
-	sdata->tf = &st_sensors_tf_spi;
-	sdata->get_irq_data_ready = st_sensors_spi_get_irq;
+	sdata->irq = spi->irq;
+
+	return 0;
 }
 EXPORT_SYMBOL(st_sensors_spi_configure);
 
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index 630c8cb35e8b..4a2efa00f7f2 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -13,6 +13,7 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/trigger.h>
 #include <linux/interrupt.h>
+#include <linux/regmap.h>
 #include <linux/iio/common/st_sensors.h>
 #include "st_sensors_core.h"
 
@@ -26,8 +27,7 @@
 static int st_sensors_new_samples_available(struct iio_dev *indio_dev,
 					    struct st_sensor_data *sdata)
 {
-	u8 status;
-	int ret;
+	int ret, status;
 
 	/* How would I know if I can't check it? */
 	if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr)
@@ -37,9 +37,9 @@ static int st_sensors_new_samples_available(struct iio_dev *indio_dev,
 	if (!indio_dev->active_scan_mask)
 		return 0;
 
-	ret = sdata->tf->read_byte(&sdata->tb, sdata->dev,
-			sdata->sensor_settings->drdy_irq.stat_drdy.addr,
-			&status);
+	ret = regmap_read(sdata->regmap,
+			  sdata->sensor_settings->drdy_irq.stat_drdy.addr,
+			  &status);
 	if (ret < 0) {
 		dev_err(sdata->dev,
 			"error checking samples available\n");
@@ -121,9 +121,9 @@ static irqreturn_t st_sensors_irq_thread(int irq, void *p)
 int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 				const struct iio_trigger_ops *trigger_ops)
 {
-	int err, irq;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 	unsigned long irq_trig;
+	int err;
 
 	sdata->trig = iio_trigger_alloc("%s-trigger", indio_dev->name);
 	if (sdata->trig == NULL) {
@@ -135,8 +135,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 	sdata->trig->ops = trigger_ops;
 	sdata->trig->dev.parent = sdata->dev;
 
-	irq = sdata->get_irq_data_ready(indio_dev);
-	irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+	irq_trig = irqd_get_trigger_type(irq_get_irq_data(sdata->irq));
 	/*
 	 * If the IRQ is triggered on falling edge, we need to mark the
 	 * interrupt as active low, if the hardware supports this.
@@ -206,12 +205,12 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 	    sdata->sensor_settings->drdy_irq.stat_drdy.addr)
 		irq_trig |= IRQF_SHARED;
 
-	err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev),
-			st_sensors_irq_handler,
-			st_sensors_irq_thread,
-			irq_trig,
-			sdata->trig->name,
-			sdata->trig);
+	err = request_threaded_irq(sdata->irq,
+				   st_sensors_irq_handler,
+				   st_sensors_irq_thread,
+				   irq_trig,
+				   sdata->trig->name,
+				   sdata->trig);
 	if (err) {
 		dev_err(&indio_dev->dev, "failed to request trigger IRQ.\n");
 		goto iio_trigger_free;
@@ -227,7 +226,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 	return 0;
 
 iio_trigger_register_error:
-	free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig);
+	free_irq(sdata->irq, sdata->trig);
 iio_trigger_free:
 	iio_trigger_free(sdata->trig);
 	return err;
@@ -239,7 +238,7 @@ void st_sensors_deallocate_trigger(struct iio_dev *indio_dev)
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
 	iio_trigger_unregister(sdata->trig);
-	free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig);
+	free_irq(sdata->irq, sdata->trig);
 	iio_trigger_free(sdata->trig);
 }
 EXPORT_SYMBOL(st_sensors_deallocate_trigger);
diff --git a/drivers/iio/gyro/st_gyro.h b/drivers/iio/gyro/st_gyro.h
index 460d190be4a4..592f6b34e987 100644
--- a/drivers/iio/gyro/st_gyro.h
+++ b/drivers/iio/gyro/st_gyro.h
@@ -32,6 +32,7 @@ static const struct st_sensors_platform_data gyro_pdata = {
 	.drdy_int_pin = 2,
 };
 
+const struct st_sensor_settings *st_gyro_get_settings(const char *name);
 int st_gyro_common_probe(struct iio_dev *indio_dev);
 void st_gyro_common_remove(struct iio_dev *indio_dev);
 
diff --git a/drivers/iio/gyro/st_gyro_buffer.c b/drivers/iio/gyro/st_gyro_buffer.c
index 6e362f735e92..7465ad62391c 100644
--- a/drivers/iio/gyro/st_gyro_buffer.c
+++ b/drivers/iio/gyro/st_gyro_buffer.c
@@ -29,61 +29,51 @@ int st_gyro_trig_set_state(struct iio_trigger *trig, bool state)
 	return st_sensors_set_dataready_irq(indio_dev, state);
 }
 
-static int st_gyro_buffer_preenable(struct iio_dev *indio_dev)
-{
-	return st_sensors_set_enable(indio_dev, true);
-}
-
 static int st_gyro_buffer_postenable(struct iio_dev *indio_dev)
 {
 	int err;
-	struct st_sensor_data *gdata = iio_priv(indio_dev);
 
-	gdata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
-	if (gdata->buffer_data == NULL) {
-		err = -ENOMEM;
-		goto allocate_memory_error;
-	}
+	err = iio_triggered_buffer_postenable(indio_dev);
+	if (err < 0)
+		return err;
 
 	err = st_sensors_set_axis_enable(indio_dev,
-					(u8)indio_dev->active_scan_mask[0]);
+					 (u8)indio_dev->active_scan_mask[0]);
 	if (err < 0)
-		goto st_gyro_buffer_postenable_error;
+		goto st_gyro_buffer_predisable;
 
-	err = iio_triggered_buffer_postenable(indio_dev);
+	err = st_sensors_set_enable(indio_dev, true);
 	if (err < 0)
-		goto st_gyro_buffer_postenable_error;
+		goto st_gyro_buffer_enable_all_axis;
 
-	return err;
+	return 0;
 
-st_gyro_buffer_postenable_error:
-	kfree(gdata->buffer_data);
-allocate_memory_error:
+st_gyro_buffer_enable_all_axis:
+	st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
+st_gyro_buffer_predisable:
+	iio_triggered_buffer_predisable(indio_dev);
 	return err;
 }
 
 static int st_gyro_buffer_predisable(struct iio_dev *indio_dev)
 {
-	int err;
-	struct st_sensor_data *gdata = iio_priv(indio_dev);
+	int err, err2;
 
-	err = iio_triggered_buffer_predisable(indio_dev);
+	err = st_sensors_set_enable(indio_dev, false);
 	if (err < 0)
-		goto st_gyro_buffer_predisable_error;
+		goto st_gyro_buffer_predisable;
 
 	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
-	if (err < 0)
-		goto st_gyro_buffer_predisable_error;
 
-	err = st_sensors_set_enable(indio_dev, false);
+st_gyro_buffer_predisable:
+	err2 = iio_triggered_buffer_predisable(indio_dev);
+	if (!err)
+		err = err2;
 
-st_gyro_buffer_predisable_error:
-	kfree(gdata->buffer_data);
 	return err;
 }
 
 static const struct iio_buffer_setup_ops st_gyro_buffer_setup_ops = {
-	.preenable = &st_gyro_buffer_preenable,
 	.postenable = &st_gyro_buffer_postenable,
 	.predisable = &st_gyro_buffer_predisable,
 };
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index e995dc77e30e..c0acbb5d2ffb 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -12,7 +12,6 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/types.h>
-#include <linux/mutex.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
@@ -368,28 +367,41 @@ static const struct iio_trigger_ops st_gyro_trigger_ops = {
 #define ST_GYRO_TRIGGER_OPS NULL
 #endif
 
+/*
+ * st_gyro_get_settings() - get sensor settings from device name
+ * @name: device name buffer reference.
+ *
+ * Return: valid reference on success, NULL otherwise.
+ */
+const struct st_sensor_settings *st_gyro_get_settings(const char *name)
+{
+	int index = st_sensors_get_settings_index(name,
+					st_gyro_sensors_settings,
+					ARRAY_SIZE(st_gyro_sensors_settings));
+	if (index < 0)
+		return NULL;
+
+	return &st_gyro_sensors_settings[index];
+}
+EXPORT_SYMBOL(st_gyro_get_settings);
+
 int st_gyro_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *gdata = iio_priv(indio_dev);
-	int irq = gdata->get_irq_data_ready(indio_dev);
 	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &gyro_info;
-	mutex_init(&gdata->tb.buf_lock);
 
 	err = st_sensors_power_enable(indio_dev);
 	if (err)
 		return err;
 
-	err = st_sensors_check_device_support(indio_dev,
-					ARRAY_SIZE(st_gyro_sensors_settings),
-					st_gyro_sensors_settings);
+	err = st_sensors_verify_id(indio_dev);
 	if (err < 0)
 		goto st_gyro_power_off;
 
 	gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
-	gdata->multiread_bit = gdata->sensor_settings->multi_read_bit;
 	indio_dev->channels = gdata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
@@ -406,7 +418,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
 	if (err < 0)
 		goto st_gyro_power_off;
 
-	if (irq > 0) {
+	if (gdata->irq > 0) {
 		err = st_sensors_allocate_trigger(indio_dev,
 						  ST_GYRO_TRIGGER_OPS);
 		if (err < 0)
@@ -423,7 +435,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
 	return 0;
 
 st_gyro_device_register_error:
-	if (irq > 0)
+	if (gdata->irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 st_gyro_probe_trigger_error:
 	st_gyro_deallocate_ring(indio_dev);
@@ -441,7 +453,7 @@ void st_gyro_common_remove(struct iio_dev *indio_dev)
 	st_sensors_power_disable(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (gdata->get_irq_data_ready(indio_dev) > 0)
+	if (gdata->irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 
 	st_gyro_deallocate_ring(indio_dev);
diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
index f2a8683db7d9..05a1a0874bd5 100644
--- a/drivers/iio/gyro/st_gyro_i2c.c
+++ b/drivers/iio/gyro/st_gyro_i2c.c
@@ -63,21 +63,33 @@ MODULE_DEVICE_TABLE(of, st_gyro_of_match);
 #endif
 
 static int st_gyro_i2c_probe(struct i2c_client *client,
-						const struct i2c_device_id *id)
+			     const struct i2c_device_id *id)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *gdata;
+	struct iio_dev *indio_dev;
 	int err;
 
+	st_sensors_of_name_probe(&client->dev, st_gyro_of_match,
+				 client->name, sizeof(client->name));
+
+	settings = st_gyro_get_settings(client->name);
+	if (!settings) {
+		dev_err(&client->dev, "device name %s not recognized.\n",
+			client->name);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*gdata));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	gdata = iio_priv(indio_dev);
-	st_sensors_of_name_probe(&client->dev, st_gyro_of_match,
-				 client->name, sizeof(client->name));
+	gdata->sensor_settings = (struct st_sensor_settings *)settings;
 
-	st_sensors_i2c_configure(indio_dev, client, gdata);
+	err = st_sensors_i2c_configure(indio_dev, client);
+	if (err < 0)
+		return err;
 
 	err = st_gyro_common_probe(indio_dev);
 	if (err < 0)
diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
index 93c48248bea6..b5c624251231 100644
--- a/drivers/iio/gyro/st_gyro_spi.c
+++ b/drivers/iio/gyro/st_gyro_spi.c
@@ -69,19 +69,31 @@ MODULE_DEVICE_TABLE(of, st_gyro_of_match);
 
 static int st_gyro_spi_probe(struct spi_device *spi)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *gdata;
+	struct iio_dev *indio_dev;
 	int err;
 
+	st_sensors_of_name_probe(&spi->dev, st_gyro_of_match,
+				 spi->modalias, sizeof(spi->modalias));
+
+	settings = st_gyro_get_settings(spi->modalias);
+	if (!settings) {
+		dev_err(&spi->dev, "device name %s not recognized.\n",
+			spi->modalias);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*gdata));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	gdata = iio_priv(indio_dev);
+	gdata->sensor_settings = (struct st_sensor_settings *)settings;
 
-	st_sensors_of_name_probe(&spi->dev, st_gyro_of_match,
-				 spi->modalias, sizeof(spi->modalias));
-	st_sensors_spi_configure(indio_dev, spi, gdata);
+	err = st_sensors_spi_configure(indio_dev, spi);
+	if (err < 0)
+		return err;
 
 	err = st_gyro_common_probe(indio_dev);
 	if (err < 0)
diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c
index f18da7859229..3bac98e731d9 100644
--- a/drivers/iio/humidity/am2315.c
+++ b/drivers/iio/humidity/am2315.c
@@ -240,32 +240,15 @@ static int am2315_probe(struct i2c_client *client,
 	indio_dev->channels = am2315_channels;
 	indio_dev->num_channels = ARRAY_SIZE(am2315_channels);
 
-	ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
+	ret = devm_iio_triggered_buffer_setup(&client->dev,
+					indio_dev, iio_pollfunc_store_time,
 					 am2315_trigger_handler, NULL);
 	if (ret < 0) {
 		dev_err(&client->dev, "iio triggered buffer setup failed\n");
 		return ret;
 	}
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0)
-		goto err_buffer_cleanup;
-
-	return 0;
-
-err_buffer_cleanup:
-	iio_triggered_buffer_cleanup(indio_dev);
-	return ret;
-}
-
-static int am2315_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-
-	iio_device_unregister(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct i2c_device_id am2315_i2c_id[] = {
@@ -287,7 +270,6 @@ static struct i2c_driver am2315_driver = {
 		.acpi_match_table = ACPI_PTR(am2315_acpi_id),
 	},
 	.probe =            am2315_probe,
-	.remove =	    am2315_remove,
 	.id_table =         am2315_i2c_id,
 };
 
diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
index 066e05f92081..bfe1cdb16846 100644
--- a/drivers/iio/humidity/hdc100x.c
+++ b/drivers/iio/humidity/hdc100x.c
@@ -385,28 +385,16 @@ static int hdc100x_probe(struct i2c_client *client,
 	hdc100x_set_it_time(data, 1, hdc100x_int_time[1][0]);
 	hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE, 0);
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+	ret = devm_iio_triggered_buffer_setup(&client->dev,
+					 indio_dev, NULL,
 					 hdc100x_trigger_handler,
 					 &hdc_buffer_setup_ops);
 	if (ret < 0) {
 		dev_err(&client->dev, "iio triggered buffer setup failed\n");
 		return ret;
 	}
-	ret = iio_device_register(indio_dev);
-	if (ret < 0)
-		iio_triggered_buffer_cleanup(indio_dev);
 
-	return ret;
-}
-
-static int hdc100x_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-
-	iio_device_unregister(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct i2c_device_id hdc100x_id[] = {
@@ -436,7 +424,6 @@ static struct i2c_driver hdc100x_driver = {
 		.of_match_table = of_match_ptr(hdc100x_dt_ids),
 	},
 	.probe = hdc100x_probe,
-	.remove = hdc100x_remove,
 	.id_table = hdc100x_id,
 };
 module_i2c_driver(hdc100x_driver);
diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index 4957e6df447e..f3c7282321a8 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -17,6 +17,18 @@ config ADIS16400
 	  adis16365, adis16400 and adis16405 triaxial inertial sensors
 	  (adis16400 series also have magnetometers).
 
+config ADIS16460
+	tristate "Analog Devices ADIS16460 and similar IMU driver"
+	depends on SPI
+	select IIO_ADIS_LIB
+	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+	help
+	  Say yes here to build support for Analog Devices ADIS16460 inertial
+	  sensor.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called adis16460.
+
 config ADIS16480
 	tristate "Analog Devices ADIS16480 and similar IMU driver"
 	depends on SPI
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index 9e452fce1aaf..4a6958865504 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -5,6 +5,7 @@
 
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ADIS16400) += adis16400.o
+obj-$(CONFIG_ADIS16460) += adis16460.o
 obj-$(CONFIG_ADIS16480) += adis16480.o
 
 adis_lib-y += adis.o
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index 30281e91dbf9..1631c255deab 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -39,18 +39,24 @@ int adis_write_reg(struct adis *adis, unsigned int reg,
 			.len = 2,
 			.cs_change = 1,
 			.delay_usecs = adis->data->write_delay,
+			.cs_change_delay = adis->data->cs_change_delay,
+			.cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 2,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
 			.delay_usecs = adis->data->write_delay,
+			.cs_change_delay = adis->data->cs_change_delay,
+			.cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 4,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
 			.delay_usecs = adis->data->write_delay,
+			.cs_change_delay = adis->data->cs_change_delay,
+			.cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 6,
 			.bits_per_word = 8,
@@ -133,12 +139,16 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
 			.len = 2,
 			.cs_change = 1,
 			.delay_usecs = adis->data->write_delay,
+			.cs_change_delay = adis->data->cs_change_delay,
+			.cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 2,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
 			.delay_usecs = adis->data->read_delay,
+			.cs_change_delay = adis->data->cs_change_delay,
+			.cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.tx_buf = adis->tx + 4,
 			.rx_buf = adis->rx,
@@ -146,6 +156,8 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
 			.len = 2,
 			.cs_change = 1,
 			.delay_usecs = adis->data->read_delay,
+			.cs_change_delay = adis->data->cs_change_delay,
+			.cs_change_delay_unit = SPI_DELAY_UNIT_USECS,
 		}, {
 			.rx_buf = adis->rx + 2,
 			.bits_per_word = 8,
diff --git a/drivers/iio/imu/adis16460.c b/drivers/iio/imu/adis16460.c
new file mode 100644
index 000000000000..1ef11640ee20
--- /dev/null
+++ b/drivers/iio/imu/adis16460.c
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADIS16460 IMU driver
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/imu/adis.h>
+
+#include <linux/debugfs.h>
+
+#define ADIS16460_REG_FLASH_CNT		0x00
+#define ADIS16460_REG_DIAG_STAT		0x02
+#define ADIS16460_REG_X_GYRO_LOW	0x04
+#define ADIS16460_REG_X_GYRO_OUT	0x06
+#define ADIS16460_REG_Y_GYRO_LOW	0x08
+#define ADIS16460_REG_Y_GYRO_OUT	0x0A
+#define ADIS16460_REG_Z_GYRO_LOW	0x0C
+#define ADIS16460_REG_Z_GYRO_OUT	0x0E
+#define ADIS16460_REG_X_ACCL_LOW	0x10
+#define ADIS16460_REG_X_ACCL_OUT	0x12
+#define ADIS16460_REG_Y_ACCL_LOW	0x14
+#define ADIS16460_REG_Y_ACCL_OUT	0x16
+#define ADIS16460_REG_Z_ACCL_LOW	0x18
+#define ADIS16460_REG_Z_ACCL_OUT	0x1A
+#define ADIS16460_REG_SMPL_CNTR		0x1C
+#define ADIS16460_REG_TEMP_OUT		0x1E
+#define ADIS16460_REG_X_DELT_ANG	0x24
+#define ADIS16460_REG_Y_DELT_ANG	0x26
+#define ADIS16460_REG_Z_DELT_ANG	0x28
+#define ADIS16460_REG_X_DELT_VEL	0x2A
+#define ADIS16460_REG_Y_DELT_VEL	0x2C
+#define ADIS16460_REG_Z_DELT_VEL	0x2E
+#define ADIS16460_REG_MSC_CTRL		0x32
+#define ADIS16460_REG_SYNC_SCAL		0x34
+#define ADIS16460_REG_DEC_RATE		0x36
+#define ADIS16460_REG_FLTR_CTRL		0x38
+#define ADIS16460_REG_GLOB_CMD		0x3E
+#define ADIS16460_REG_X_GYRO_OFF	0x40
+#define ADIS16460_REG_Y_GYRO_OFF	0x42
+#define ADIS16460_REG_Z_GYRO_OFF	0x44
+#define ADIS16460_REG_X_ACCL_OFF	0x46
+#define ADIS16460_REG_Y_ACCL_OFF	0x48
+#define ADIS16460_REG_Z_ACCL_OFF	0x4A
+#define ADIS16460_REG_LOT_ID1		0x52
+#define ADIS16460_REG_LOT_ID2		0x54
+#define ADIS16460_REG_PROD_ID		0x56
+#define ADIS16460_REG_SERIAL_NUM	0x58
+#define ADIS16460_REG_CAL_SGNTR		0x60
+#define ADIS16460_REG_CAL_CRC		0x62
+#define ADIS16460_REG_CODE_SGNTR	0x64
+#define ADIS16460_REG_CODE_CRC		0x66
+
+struct adis16460_chip_info {
+	unsigned int num_channels;
+	const struct iio_chan_spec *channels;
+	unsigned int gyro_max_val;
+	unsigned int gyro_max_scale;
+	unsigned int accel_max_val;
+	unsigned int accel_max_scale;
+};
+
+struct adis16460 {
+	const struct adis16460_chip_info *chip_info;
+	struct adis adis;
+};
+
+#ifdef CONFIG_DEBUG_FS
+
+static int adis16460_show_serial_number(void *arg, u64 *val)
+{
+	struct adis16460 *adis16460 = arg;
+	u16 serial;
+	int ret;
+
+	ret = adis_read_reg_16(&adis16460->adis, ADIS16460_REG_SERIAL_NUM,
+		&serial);
+	if (ret < 0)
+		return ret;
+
+	*val = serial;
+
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(adis16460_serial_number_fops,
+	adis16460_show_serial_number, NULL, "0x%.4llx\n");
+
+static int adis16460_show_product_id(void *arg, u64 *val)
+{
+	struct adis16460 *adis16460 = arg;
+	u16 prod_id;
+	int ret;
+
+	ret = adis_read_reg_16(&adis16460->adis, ADIS16460_REG_PROD_ID,
+		&prod_id);
+	if (ret < 0)
+		return ret;
+
+	*val = prod_id;
+
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(adis16460_product_id_fops,
+	adis16460_show_product_id, NULL, "%llu\n");
+
+static int adis16460_show_flash_count(void *arg, u64 *val)
+{
+	struct adis16460 *adis16460 = arg;
+	u32 flash_count;
+	int ret;
+
+	ret = adis_read_reg_32(&adis16460->adis, ADIS16460_REG_FLASH_CNT,
+		&flash_count);
+	if (ret < 0)
+		return ret;
+
+	*val = flash_count;
+
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(adis16460_flash_count_fops,
+	adis16460_show_flash_count, NULL, "%lld\n");
+
+static int adis16460_debugfs_init(struct iio_dev *indio_dev)
+{
+	struct adis16460 *adis16460 = iio_priv(indio_dev);
+
+	debugfs_create_file("serial_number", 0400, indio_dev->debugfs_dentry,
+		adis16460, &adis16460_serial_number_fops);
+	debugfs_create_file("product_id", 0400, indio_dev->debugfs_dentry,
+		adis16460, &adis16460_product_id_fops);
+	debugfs_create_file("flash_count", 0400, indio_dev->debugfs_dentry,
+		adis16460, &adis16460_flash_count_fops);
+
+	return 0;
+}
+
+#else
+
+static int adis16460_debugfs_init(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+#endif
+
+static int adis16460_set_freq(struct iio_dev *indio_dev, int val, int val2)
+{
+	struct adis16460 *st = iio_priv(indio_dev);
+	unsigned int t;
+
+	t =  val * 1000 + val2 / 1000;
+	if (t <= 0)
+		return -EINVAL;
+
+	t = 2048000 / t;
+	if (t > 2048)
+		t = 2048;
+
+	if (t != 0)
+		t--;
+
+	return adis_write_reg_16(&st->adis, ADIS16460_REG_DEC_RATE, t);
+}
+
+static int adis16460_get_freq(struct iio_dev *indio_dev, int *val, int *val2)
+{
+	struct adis16460 *st = iio_priv(indio_dev);
+	uint16_t t;
+	int ret;
+	unsigned int freq;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16460_REG_DEC_RATE, &t);
+	if (ret < 0)
+		return ret;
+
+	freq = 2048000 / (t + 1);
+	*val = freq / 1000;
+	*val2 = (freq % 1000) * 1000;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int adis16460_read_raw(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int *val, int *val2, long info)
+{
+	struct adis16460 *st = iio_priv(indio_dev);
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		return adis_single_conversion(indio_dev, chan, 0, val);
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = st->chip_info->gyro_max_scale;
+			*val2 = st->chip_info->gyro_max_val;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_ACCEL:
+			*val = st->chip_info->accel_max_scale;
+			*val2 = st->chip_info->accel_max_val;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_TEMP:
+			*val = 50; /* 50 milli degrees Celsius/LSB */
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		*val = 500; /* 25 degrees Celsius = 0x0000 */
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return adis16460_get_freq(indio_dev, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int adis16460_write_raw(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int val, int val2, long info)
+{
+	switch (info) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return adis16460_set_freq(indio_dev, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+enum {
+	ADIS16460_SCAN_GYRO_X,
+	ADIS16460_SCAN_GYRO_Y,
+	ADIS16460_SCAN_GYRO_Z,
+	ADIS16460_SCAN_ACCEL_X,
+	ADIS16460_SCAN_ACCEL_Y,
+	ADIS16460_SCAN_ACCEL_Z,
+	ADIS16460_SCAN_TEMP,
+};
+
+#define ADIS16460_MOD_CHANNEL(_type, _mod, _address, _si, _bits) \
+	{ \
+		.type = (_type), \
+		.modified = 1, \
+		.channel2 = (_mod), \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+		.address = (_address), \
+		.scan_index = (_si), \
+		.scan_type = { \
+			.sign = 's', \
+			.realbits = (_bits), \
+			.storagebits = (_bits), \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+#define ADIS16460_GYRO_CHANNEL(_mod) \
+	ADIS16460_MOD_CHANNEL(IIO_ANGL_VEL, IIO_MOD_ ## _mod, \
+	ADIS16460_REG_ ## _mod ## _GYRO_LOW, ADIS16460_SCAN_GYRO_ ## _mod, \
+	32)
+
+#define ADIS16460_ACCEL_CHANNEL(_mod) \
+	ADIS16460_MOD_CHANNEL(IIO_ACCEL, IIO_MOD_ ## _mod, \
+	ADIS16460_REG_ ## _mod ## _ACCL_LOW, ADIS16460_SCAN_ACCEL_ ## _mod, \
+	32)
+
+#define ADIS16460_TEMP_CHANNEL() { \
+		.type = IIO_TEMP, \
+		.indexed = 1, \
+		.channel = 0, \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			BIT(IIO_CHAN_INFO_SCALE) | \
+			BIT(IIO_CHAN_INFO_OFFSET), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+		.address = ADIS16460_REG_TEMP_OUT, \
+		.scan_index = ADIS16460_SCAN_TEMP, \
+		.scan_type = { \
+			.sign = 's', \
+			.realbits = 16, \
+			.storagebits = 16, \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+static const struct iio_chan_spec adis16460_channels[] = {
+	ADIS16460_GYRO_CHANNEL(X),
+	ADIS16460_GYRO_CHANNEL(Y),
+	ADIS16460_GYRO_CHANNEL(Z),
+	ADIS16460_ACCEL_CHANNEL(X),
+	ADIS16460_ACCEL_CHANNEL(Y),
+	ADIS16460_ACCEL_CHANNEL(Z),
+	ADIS16460_TEMP_CHANNEL(),
+	IIO_CHAN_SOFT_TIMESTAMP(7)
+};
+
+static const struct adis16460_chip_info adis16460_chip_info = {
+	.channels = adis16460_channels,
+	.num_channels = ARRAY_SIZE(adis16460_channels),
+	/*
+	 * storing the value in rad/degree and the scale in degree
+	 * gives us the result in rad and better precession than
+	 * storing the scale directly in rad.
+	 */
+	.gyro_max_val = IIO_RAD_TO_DEGREE(200 << 16),
+	.gyro_max_scale = 1,
+	.accel_max_val = IIO_M_S_2_TO_G(20000 << 16),
+	.accel_max_scale = 5,
+};
+
+static const struct iio_info adis16460_info = {
+	.read_raw = &adis16460_read_raw,
+	.write_raw = &adis16460_write_raw,
+	.update_scan_mode = adis_update_scan_mode,
+	.debugfs_reg_access = adis_debugfs_reg_access,
+};
+
+static int adis16460_enable_irq(struct adis *adis, bool enable)
+{
+	/*
+	 * There is no way to gate the data-ready signal internally inside the
+	 * ADIS16460 :(
+	 */
+	if (enable)
+		enable_irq(adis->spi->irq);
+	else
+		disable_irq(adis->spi->irq);
+
+	return 0;
+}
+
+static int adis16460_initial_setup(struct iio_dev *indio_dev)
+{
+	struct adis16460 *st = iio_priv(indio_dev);
+	uint16_t prod_id;
+	unsigned int device_id;
+	int ret;
+
+	adis_reset(&st->adis);
+	msleep(222);
+
+	ret = adis_write_reg_16(&st->adis, ADIS16460_REG_GLOB_CMD, BIT(1));
+	if (ret)
+		return ret;
+	msleep(75);
+
+	ret = adis_check_status(&st->adis);
+	if (ret)
+		return ret;
+
+	ret = adis_read_reg_16(&st->adis, ADIS16460_REG_PROD_ID, &prod_id);
+	if (ret)
+		return ret;
+
+	ret = sscanf(indio_dev->name, "adis%u\n", &device_id);
+	if (ret != 1)
+		return -EINVAL;
+
+	if (prod_id != device_id)
+		dev_warn(&indio_dev->dev, "Device ID(%u) and product ID(%u) do not match.",
+				device_id, prod_id);
+
+	return 0;
+}
+
+#define ADIS16460_DIAG_STAT_IN_CLK_OOS	7
+#define ADIS16460_DIAG_STAT_FLASH_MEM	6
+#define ADIS16460_DIAG_STAT_SELF_TEST	5
+#define ADIS16460_DIAG_STAT_OVERRANGE	4
+#define ADIS16460_DIAG_STAT_SPI_COMM	3
+#define ADIS16460_DIAG_STAT_FLASH_UPT	2
+
+static const char * const adis16460_status_error_msgs[] = {
+	[ADIS16460_DIAG_STAT_IN_CLK_OOS] = "Input clock out of sync",
+	[ADIS16460_DIAG_STAT_FLASH_MEM] = "Flash memory failure",
+	[ADIS16460_DIAG_STAT_SELF_TEST] = "Self test diagnostic failure",
+	[ADIS16460_DIAG_STAT_OVERRANGE] = "Sensor overrange",
+	[ADIS16460_DIAG_STAT_SPI_COMM] = "SPI communication failure",
+	[ADIS16460_DIAG_STAT_FLASH_UPT] = "Flash update failure",
+};
+
+static const struct adis_data adis16460_data = {
+	.diag_stat_reg = ADIS16460_REG_DIAG_STAT,
+	.glob_cmd_reg = ADIS16460_REG_GLOB_CMD,
+	.has_paging = false,
+	.read_delay = 5,
+	.write_delay = 5,
+	.cs_change_delay = 16,
+	.status_error_msgs = adis16460_status_error_msgs,
+	.status_error_mask = BIT(ADIS16460_DIAG_STAT_IN_CLK_OOS) |
+		BIT(ADIS16460_DIAG_STAT_FLASH_MEM) |
+		BIT(ADIS16460_DIAG_STAT_SELF_TEST) |
+		BIT(ADIS16460_DIAG_STAT_OVERRANGE) |
+		BIT(ADIS16460_DIAG_STAT_SPI_COMM) |
+		BIT(ADIS16460_DIAG_STAT_FLASH_UPT),
+	.enable_irq = adis16460_enable_irq,
+};
+
+static int adis16460_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct adis16460 *st;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	st = iio_priv(indio_dev);
+
+	st->chip_info = &adis16460_chip_info;
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->channels = st->chip_info->channels;
+	indio_dev->num_channels = st->chip_info->num_channels;
+	indio_dev->info = &adis16460_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = adis_init(&st->adis, indio_dev, spi, &adis16460_data);
+	if (ret)
+		return ret;
+
+	ret = adis_setup_buffer_and_trigger(&st->adis, indio_dev, NULL);
+	if (ret)
+		return ret;
+
+	adis16460_enable_irq(&st->adis, 0);
+
+	ret = adis16460_initial_setup(indio_dev);
+	if (ret)
+		goto error_cleanup_buffer;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_cleanup_buffer;
+
+	adis16460_debugfs_init(indio_dev);
+
+	return 0;
+
+error_cleanup_buffer:
+	adis_cleanup_buffer_and_trigger(&st->adis, indio_dev);
+	return ret;
+}
+
+static int adis16460_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct adis16460 *st = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	adis_cleanup_buffer_and_trigger(&st->adis, indio_dev);
+
+	return 0;
+}
+
+static const struct spi_device_id adis16460_ids[] = {
+	{ "adis16460", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, adis16460_ids);
+
+static const struct of_device_id adis16460_of_match[] = {
+	{ .compatible = "adi,adis16460" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, adis16460_of_match);
+
+static struct spi_driver adis16460_driver = {
+	.driver = {
+		.name = "adis16460",
+		.of_match_table = adis16460_of_match,
+	},
+	.id_table = adis16460_ids,
+	.probe = adis16460_probe,
+	.remove = adis16460_remove,
+};
+module_spi_driver(adis16460_driver);
+
+MODULE_AUTHOR("Dragos Bogdan <dragos.bogdan@analog.com>");
+MODULE_DESCRIPTION("Analog Devices ADIS16460 IMU driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index 395f3bd7de0a..e4c4c12236a7 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -14,8 +14,9 @@ config INV_MPU6050_I2C
 	select INV_MPU6050_IIO
 	select REGMAP_I2C
 	help
-	  This driver supports the Invensense MPU6050/6500/9150 and
-	  ICM20608/20602 motion tracking devices over I2C.
+	  This driver supports the Invensense MPU6000/6050/6500/6515,
+	  MPU9150/9250/9255 and ICM20608/20602 motion tracking devices
+	  over I2C.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-i2c.
 
@@ -25,7 +26,8 @@ config INV_MPU6050_SPI
 	select INV_MPU6050_IIO
 	select REGMAP_SPI
 	help
-	  This driver supports the Invensense MPU6050/6500/9150 and
-	  ICM20608/20602 motion tracking devices over SPI.
+	  This driver supports the Invensense MPU6000/6050/6500/6515,
+	  MPU9150/9250/9255 and ICM20608/20602 motion tracking devices
+	  over SPI.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-spi.
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 8a704cd5bddb..b17f060b52fc 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -1137,10 +1137,9 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 	if (result)
 		return result;
 
-	result = devm_add_action(dev, inv_mpu_core_disable_regulator_action,
+	result = devm_add_action_or_reset(dev, inv_mpu_core_disable_regulator_action,
 				 st);
 	if (result) {
-		inv_mpu_core_disable_regulator_action(st);
 		dev_err(dev, "Failed to setup regulator cleanup action %d\n",
 			result);
 		return result;
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 002a423eae52..939058b27746 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -2,15 +2,17 @@
 
 config IIO_ST_LSM6DSX
 	tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors"
-	depends on (I2C || SPI)
+	depends on (I2C || SPI || I3C)
 	select IIO_BUFFER
 	select IIO_KFIFO_BUF
 	select IIO_ST_LSM6DSX_I2C if (I2C)
 	select IIO_ST_LSM6DSX_SPI if (SPI_MASTER)
+	select IIO_ST_LSM6DSX_I3C if (I3C)
 	help
 	  Say yes here to build support for STMicroelectronics LSM6DSx imu
 	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
-	  ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr
+	  ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c,
+	  ism330dhcx
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called st_lsm6dsx.
@@ -24,3 +26,8 @@ config IIO_ST_LSM6DSX_SPI
 	tristate
 	depends on IIO_ST_LSM6DSX
 	select REGMAP_SPI
+
+config IIO_ST_LSM6DSX_I3C
+	tristate
+	depends on IIO_ST_LSM6DSX
+	select REGMAP_I3C
diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile
index 28cc67399d94..57cbcd67d64f 100644
--- a/drivers/iio/imu/st_lsm6dsx/Makefile
+++ b/drivers/iio/imu/st_lsm6dsx/Makefile
@@ -5,3 +5,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
 obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
 obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o
 obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o
+obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index c14bf533b66b..4e8e67ae1632 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -22,6 +22,8 @@
 #define ST_ASM330LHH_DEV_NAME	"asm330lhh"
 #define ST_LSM6DSOX_DEV_NAME	"lsm6dsox"
 #define ST_LSM6DSR_DEV_NAME	"lsm6dsr"
+#define ST_LSM6DS3TRC_DEV_NAME	"lsm6ds3tr-c"
+#define ST_ISM330DHCX_DEV_NAME	"ism330dhcx"
 
 enum st_lsm6dsx_hw_id {
 	ST_LSM6DS3_ID,
@@ -33,6 +35,8 @@ enum st_lsm6dsx_hw_id {
 	ST_ASM330LHH_ID,
 	ST_LSM6DSOX_ID,
 	ST_LSM6DSR_ID,
+	ST_LSM6DS3TRC_ID,
+	ST_ISM330DHCX_ID,
 	ST_LSM6DSX_MAX_ID,
 };
 
@@ -54,8 +58,8 @@ enum st_lsm6dsx_hw_id {
 	.address = addr,						\
 	.modified = 1,							\
 	.channel2 = mod,						\
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
-			      BIT(IIO_CHAN_INFO_SCALE),			\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
 	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
 	.scan_index = scan_idx,						\
 	.scan_type = {							\
@@ -198,6 +202,9 @@ struct st_lsm6dsx_ext_dev_settings {
  * @wai: Sensor WhoAmI default value.
  * @max_fifo_size: Sensor max fifo length in FIFO words.
  * @id: List of hw id/device name supported by the driver configuration.
+ * @channels: IIO channels supported by the device.
+ * @odr_table: Hw sensors odr table (Hz + val).
+ * @fs_table: Hw sensors gain table (gain + val).
  * @decimator: List of decimator register info (addr + mask).
  * @batch: List of FIFO batching register info (addr + mask).
  * @fifo_ops: Sensor hw FIFO parameters.
@@ -211,6 +218,12 @@ struct st_lsm6dsx_settings {
 		enum st_lsm6dsx_hw_id hw_id;
 		const char *name;
 	} id[ST_LSM6DSX_MAX_ID];
+	struct {
+		const struct iio_chan_spec *chan;
+		int len;
+	} channels[2];
+	struct st_lsm6dsx_odr_table_entry odr_table[2];
+	struct st_lsm6dsx_fs_table_entry fs_table[2];
 	struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
 	struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
 	struct st_lsm6dsx_fifo_ops fifo_ops;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index e4d8a79d557d..2c03a5b80f80 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -2,10 +2,10 @@
 /*
  * STMicroelectronics st_lsm6dsx FIFO buffer library driver
  *
- * LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC: The FIFO buffer can be
- * configured to store data from gyroscope and accelerometer. Samples are
- * queued without any tag according to a specific pattern based on
- * 'FIFO data sets' (6 bytes each):
+ * LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C:
+ * The FIFO buffer can be configured to store data from gyroscope and
+ * accelerometer. Samples are queued without any tag according to a
+ * specific pattern based on 'FIFO data sets' (6 bytes each):
  *  - 1st data set is reserved for gyroscope data
  *  - 2nd data set is reserved for accelerometer data
  * The FIFO pattern changes depending on the ODRs and decimation factors
@@ -14,9 +14,10 @@
  * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the
  * value of the decimation factor and ODR set for each FIFO data set.
  *
- * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR: The FIFO buffer can be configured to
- * store data from gyroscope and accelerometer. Each sample is queued with
- * a tag (1B) indicating data source (gyroscope, accelerometer, hw timer).
+ * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/ISM330DHCX: The FIFO buffer can be
+ * configured to store data from gyroscope and accelerometer. Each sample
+ * is queued with a tag (1B) indicating data source (gyroscope, accelerometer,
+ * hw timer).
  *
  * FIFO supported modes:
  *  - BYPASS: FIFO disabled
@@ -670,7 +671,7 @@ static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
 	count = hw->settings->fifo_ops.read_fifo(hw);
 	mutex_unlock(&hw->fifo_lock);
 
-	return !count ? IRQ_NONE : IRQ_HANDLED;
+	return count ? IRQ_HANDLED : IRQ_NONE;
 }
 
 static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index a6702a74570e..85824d6739ee 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -18,13 +18,13 @@
  *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
  *   - FIFO size: 8KB
  *
- * - LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC:
+ * - LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C:
  *   - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416
  *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
  *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
  *   - FIFO size: 4KB
  *
- * - LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR
+ * - LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/ISM330DHCX:
  *   - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416
  *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
  *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
@@ -61,62 +61,18 @@
 #define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR	0x13
 #define ST_LSM6DSX_REG_INT2_ON_INT1_MASK	BIT(5)
 
-#define ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR		0x28
-#define ST_LSM6DSX_REG_ACC_OUT_Y_L_ADDR		0x2a
-#define ST_LSM6DSX_REG_ACC_OUT_Z_L_ADDR		0x2c
-
-#define ST_LSM6DSX_REG_GYRO_OUT_X_L_ADDR	0x22
-#define ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR	0x24
-#define ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR	0x26
-
-static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = {
-	[ST_LSM6DSX_ID_ACC] = {
-		.reg = {
-			.addr = 0x10,
-			.mask = GENMASK(7, 4),
-		},
-		.odr_avl[0] = {  13, 0x01 },
-		.odr_avl[1] = {  26, 0x02 },
-		.odr_avl[2] = {  52, 0x03 },
-		.odr_avl[3] = { 104, 0x04 },
-		.odr_avl[4] = { 208, 0x05 },
-		.odr_avl[5] = { 416, 0x06 },
-	},
-	[ST_LSM6DSX_ID_GYRO] = {
-		.reg = {
-			.addr = 0x11,
-			.mask = GENMASK(7, 4),
-		},
-		.odr_avl[0] = {  13, 0x01 },
-		.odr_avl[1] = {  26, 0x02 },
-		.odr_avl[2] = {  52, 0x03 },
-		.odr_avl[3] = { 104, 0x04 },
-		.odr_avl[4] = { 208, 0x05 },
-		.odr_avl[5] = { 416, 0x06 },
-	}
+static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
+	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
+	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
+	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
-static const struct st_lsm6dsx_fs_table_entry st_lsm6dsx_fs_table[] = {
-	[ST_LSM6DSX_ID_ACC] = {
-		.reg = {
-			.addr = 0x10,
-			.mask = GENMASK(3, 2),
-		},
-		.fs_avl[0] = {  IIO_G_TO_M_S_2(61), 0x0 },
-		.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
-		.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
-		.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
-	},
-	[ST_LSM6DSX_ID_GYRO] = {
-		.reg = {
-			.addr = 0x11,
-			.mask = GENMASK(3, 2),
-		},
-		.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750), 0x0 },
-		.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
-		.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
-		.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
-	}
+static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x22, IIO_MOD_X, 0),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x24, IIO_MOD_Y, 1),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x26, IIO_MOD_Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
 static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
@@ -129,6 +85,64 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.name = ST_LSM6DS3_DEV_NAME,
 			},
 		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  13, 0x01 },
+				.odr_avl[1] = {  26, 0x02 },
+				.odr_avl[2] = {  52, 0x03 },
+				.odr_avl[3] = { 104, 0x04 },
+				.odr_avl[4] = { 208, 0x05 },
+				.odr_avl[5] = { 416, 0x06 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  13, 0x01 },
+				.odr_avl[1] = {  26, 0x02 },
+				.odr_avl[2] = {  52, 0x03 },
+				.odr_avl[3] = { 104, 0x04 },
+				.odr_avl[4] = { 208, 0x05 },
+				.odr_avl[5] = { 416, 0x06 },
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+			},
+		},
 		.decimator = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.addr = 0x08,
@@ -179,6 +193,64 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.name = ST_LSM6DS3H_DEV_NAME,
 			},
 		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  13, 0x01 },
+				.odr_avl[1] = {  26, 0x02 },
+				.odr_avl[2] = {  52, 0x03 },
+				.odr_avl[3] = { 104, 0x04 },
+				.odr_avl[4] = { 208, 0x05 },
+				.odr_avl[5] = { 416, 0x06 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  13, 0x01 },
+				.odr_avl[1] = {  26, 0x02 },
+				.odr_avl[2] = {  52, 0x03 },
+				.odr_avl[3] = { 104, 0x04 },
+				.odr_avl[4] = { 208, 0x05 },
+				.odr_avl[5] = { 416, 0x06 },
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+			},
+		},
 		.decimator = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.addr = 0x08,
@@ -233,6 +305,67 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			}, {
 				.hw_id = ST_ISM330DLC_ID,
 				.name = ST_ISM330DLC_DEV_NAME,
+			}, {
+				.hw_id = ST_LSM6DS3TRC_ID,
+				.name = ST_LSM6DS3TRC_DEV_NAME,
+			},
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  13, 0x01 },
+				.odr_avl[1] = {  26, 0x02 },
+				.odr_avl[2] = {  52, 0x03 },
+				.odr_avl[3] = { 104, 0x04 },
+				.odr_avl[4] = { 208, 0x05 },
+				.odr_avl[5] = { 416, 0x06 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  13, 0x01 },
+				.odr_avl[1] = {  26, 0x02 },
+				.odr_avl[2] = {  52, 0x03 },
+				.odr_avl[3] = { 104, 0x04 },
+				.odr_avl[4] = { 208, 0x05 },
+				.odr_avl[5] = { 416, 0x06 },
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
 			},
 		},
 		.decimator = {
@@ -288,6 +421,64 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.name = ST_LSM6DSOX_DEV_NAME,
 			},
 		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  13, 0x01 },
+				.odr_avl[1] = {  26, 0x02 },
+				.odr_avl[2] = {  52, 0x03 },
+				.odr_avl[3] = { 104, 0x04 },
+				.odr_avl[4] = { 208, 0x05 },
+				.odr_avl[5] = { 416, 0x06 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  13, 0x01 },
+				.odr_avl[1] = {  26, 0x02 },
+				.odr_avl[2] = {  52, 0x03 },
+				.odr_avl[3] = { 104, 0x04 },
+				.odr_avl[4] = { 208, 0x05 },
+				.odr_avl[5] = { 416, 0x06 },
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+			},
+		},
 		.batch = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.addr = 0x09,
@@ -356,6 +547,64 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.name = ST_ASM330LHH_DEV_NAME,
 			},
 		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  13, 0x01 },
+				.odr_avl[1] = {  26, 0x02 },
+				.odr_avl[2] = {  52, 0x03 },
+				.odr_avl[3] = { 104, 0x04 },
+				.odr_avl[4] = { 208, 0x05 },
+				.odr_avl[5] = { 416, 0x06 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  13, 0x01 },
+				.odr_avl[1] = {  26, 0x02 },
+				.odr_avl[2] = {  52, 0x03 },
+				.odr_avl[3] = { 104, 0x04 },
+				.odr_avl[4] = { 208, 0x05 },
+				.odr_avl[5] = { 416, 0x06 },
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+			},
+		},
 		.batch = {
 			[ST_LSM6DSX_ID_ACC] = {
 				.addr = 0x09,
@@ -396,6 +645,67 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			{
 				.hw_id = ST_LSM6DSR_ID,
 				.name = ST_LSM6DSR_DEV_NAME,
+			}, {
+				.hw_id = ST_ISM330DHCX_ID,
+				.name = ST_ISM330DHCX_DEV_NAME,
+			},
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  13, 0x01 },
+				.odr_avl[1] = {  26, 0x02 },
+				.odr_avl[2] = {  52, 0x03 },
+				.odr_avl[3] = { 104, 0x04 },
+				.odr_avl[4] = { 208, 0x05 },
+				.odr_avl[5] = { 416, 0x06 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  13, 0x01 },
+				.odr_avl[1] = {  26, 0x02 },
+				.odr_avl[2] = {  52, 0x03 },
+				.odr_avl[3] = { 104, 0x04 },
+				.odr_avl[4] = { 208, 0x05 },
+				.odr_avl[5] = { 416, 0x06 },
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
 			},
 		},
 		.batch = {
@@ -459,26 +769,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	},
 };
 
-static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
-	ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR,
-			   IIO_MOD_X, 0),
-	ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_Y_L_ADDR,
-			   IIO_MOD_Y, 1),
-	ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_Z_L_ADDR,
-			   IIO_MOD_Z, 2),
-	IIO_CHAN_SOFT_TIMESTAMP(3),
-};
-
-static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
-	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_X_L_ADDR,
-			   IIO_MOD_X, 0),
-	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR,
-			   IIO_MOD_Y, 1),
-	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR,
-			   IIO_MOD_Z, 2),
-	IIO_CHAN_SOFT_TIMESTAMP(3),
-};
-
 int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable)
 {
 	const struct st_lsm6dsx_shub_settings *hub_settings;
@@ -533,23 +823,22 @@ static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id,
 static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor,
 				     u32 gain)
 {
-	struct st_lsm6dsx_hw *hw = sensor->hw;
-	const struct st_lsm6dsx_reg *reg;
+	const struct st_lsm6dsx_fs_table_entry *fs_table;
 	unsigned int data;
 	int i, err;
-	u8 val;
 
+	fs_table = &sensor->hw->settings->fs_table[sensor->id];
 	for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++)
-		if (st_lsm6dsx_fs_table[sensor->id].fs_avl[i].gain == gain)
+		if (fs_table->fs_avl[i].gain == gain)
 			break;
 
 	if (i == ST_LSM6DSX_FS_LIST_SIZE)
 		return -EINVAL;
 
-	val = st_lsm6dsx_fs_table[sensor->id].fs_avl[i].val;
-	reg = &st_lsm6dsx_fs_table[sensor->id].reg;
-	data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
-	err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
+	data = ST_LSM6DSX_SHIFT_VAL(fs_table->fs_avl[i].val,
+				    fs_table->reg.mask);
+	err = st_lsm6dsx_update_bits_locked(sensor->hw, fs_table->reg.addr,
+					    fs_table->reg.mask, data);
 	if (err < 0)
 		return err;
 
@@ -560,20 +849,22 @@ static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor,
 
 int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val)
 {
+	const struct st_lsm6dsx_odr_table_entry *odr_table;
 	int i;
 
+	odr_table = &sensor->hw->settings->odr_table[sensor->id];
 	for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++)
 		/*
 		 * ext devices can run at different odr respect to
 		 * accel sensor
 		 */
-		if (st_lsm6dsx_odr_table[sensor->id].odr_avl[i].hz >= odr)
+		if (odr_table->odr_avl[i].hz >= odr)
 			break;
 
 	if (i == ST_LSM6DSX_ODR_LIST_SIZE)
 		return -EINVAL;
 
-	*val = st_lsm6dsx_odr_table[sensor->id].odr_avl[i].val;
+	*val = odr_table->odr_avl[i].val;
 
 	return 0;
 }
@@ -638,7 +929,7 @@ static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 req_odr)
 			return err;
 	}
 
-	reg = &st_lsm6dsx_odr_table[ref_sensor->id].reg;
+	reg = &hw->settings->odr_table[ref_sensor->id].reg;
 	data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
 	return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
 }
@@ -783,11 +1074,12 @@ st_lsm6dsx_sysfs_sampling_frequency_avail(struct device *dev,
 {
 	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
 	enum st_lsm6dsx_sensor_id id = sensor->id;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
 	int i, len = 0;
 
 	for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++)
 		len += scnprintf(buf + len, PAGE_SIZE - len, "%d ",
-				 st_lsm6dsx_odr_table[id].odr_avl[i].hz);
+				 hw->settings->odr_table[id].odr_avl[i].hz);
 	buf[len - 1] = '\n';
 
 	return len;
@@ -799,11 +1091,12 @@ static ssize_t st_lsm6dsx_sysfs_scale_avail(struct device *dev,
 {
 	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
 	enum st_lsm6dsx_sensor_id id = sensor->id;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
 	int i, len = 0;
 
 	for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++)
 		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
-				 st_lsm6dsx_fs_table[id].fs_avl[i].gain);
+				 hw->settings->fs_table[id].fs_avl[i].gain);
 	buf[len - 1] = '\n';
 
 	return len;
@@ -1033,28 +1326,24 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	iio_dev->modes = INDIO_DIRECT_MODE;
 	iio_dev->dev.parent = hw->dev;
 	iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks;
+	iio_dev->channels = hw->settings->channels[id].chan;
+	iio_dev->num_channels = hw->settings->channels[id].len;
 
 	sensor = iio_priv(iio_dev);
 	sensor->id = id;
 	sensor->hw = hw;
-	sensor->odr = st_lsm6dsx_odr_table[id].odr_avl[0].hz;
-	sensor->gain = st_lsm6dsx_fs_table[id].fs_avl[0].gain;
+	sensor->odr = hw->settings->odr_table[id].odr_avl[0].hz;
+	sensor->gain = hw->settings->fs_table[id].fs_avl[0].gain;
 	sensor->watermark = 1;
 
 	switch (id) {
 	case ST_LSM6DSX_ID_ACC:
-		iio_dev->channels = st_lsm6dsx_acc_channels;
-		iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_acc_channels);
 		iio_dev->info = &st_lsm6dsx_acc_info;
-
 		scnprintf(sensor->name, sizeof(sensor->name), "%s_accel",
 			  name);
 		break;
 	case ST_LSM6DSX_ID_GYRO:
-		iio_dev->channels = st_lsm6dsx_gyro_channels;
-		iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_gyro_channels);
 		iio_dev->info = &st_lsm6dsx_gyro_info;
-
 		scnprintf(sensor->name, sizeof(sensor->name), "%s_gyro",
 			  name);
 		break;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index b3211e0ac07b..15c6aa5b6caa 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -75,6 +75,14 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
 		.compatible = "st,lsm6dsr",
 		.data = (void *)ST_LSM6DSR_ID,
 	},
+	{
+		.compatible = "st,lsm6ds3tr-c",
+		.data = (void *)ST_LSM6DS3TRC_ID,
+	},
+	{
+		.compatible = "st,ism330dhcx",
+		.data = (void *)ST_ISM330DHCX_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
@@ -89,6 +97,8 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
 	{ ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
 	{ ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID },
 	{ ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID },
+	{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
+	{ ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
new file mode 100644
index 000000000000..57e633121bdc
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
+ *
+ * Author: Vitor Soares <vitor.soares@synopsys.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i3c/device.h>
+#include <linux/i3c/master.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include "st_lsm6dsx.h"
+
+static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
+	I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
+	I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
+
+static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
+{
+	struct regmap_config st_lsm6dsx_i3c_regmap_config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+	};
+	const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
+							    st_lsm6dsx_i3c_ids);
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
+			(int)PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return st_lsm6dsx_probe(&i3cdev->dev, 0, (uintptr_t)id->data, regmap);
+}
+
+static struct i3c_driver st_lsm6dsx_driver = {
+	.driver = {
+		.name = "st_lsm6dsx_i3c",
+		.pm = &st_lsm6dsx_pm_ops,
+	},
+	.probe = st_lsm6dsx_i3c_probe,
+	.id_table = st_lsm6dsx_i3c_ids,
+};
+module_i3c_driver(st_lsm6dsx_driver);
+
+MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>");
+MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index c9d3c4711018..a8430ee11310 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -75,6 +75,14 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
 		.compatible = "st,lsm6dsr",
 		.data = (void *)ST_LSM6DSR_ID,
 	},
+	{
+		.compatible = "st,lsm6ds3tr-c",
+		.data = (void *)ST_LSM6DS3TRC_ID,
+	},
+	{
+		.compatible = "st,ism330dhcx",
+		.data = (void *)ST_ISM330DHCX_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -89,6 +97,8 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
 	{ ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
 	{ ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID },
 	{ ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID },
+	{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
+	{ ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index e3fd00b595d0..08d7e1ef2186 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -303,6 +303,7 @@ config MAX44000
 config MAX44009
 	tristate "MAX44009 Ambient Light Sensor"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	 Say Y here if you want to build support for Maxim Integrated's
 	 MAX44009 ambient light sensor device.
@@ -310,6 +311,16 @@ config MAX44009
 	 To compile this driver as a module, choose M here:
 	 the module will be called max44009.
 
+config NOA1305
+	tristate "ON Semiconductor NOA1305 ambient light sensor"
+	depends on I2C
+	help
+	 Say Y here if you want to build support for the ON Semiconductor
+	 NOA1305 ambient light sensor.
+
+	 To compile this driver as a module, choose M here:
+	 The module will be called noa1305.
+
 config OPT3001
 	tristate "Texas Instruments OPT3001 Light Sensor"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index e40794fbb435..00d1f9b98f39 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_LTR501)		+= ltr501.o
 obj-$(CONFIG_LV0104CS)		+= lv0104cs.o
 obj-$(CONFIG_MAX44000)		+= max44000.o
 obj-$(CONFIG_MAX44009)		+= max44009.o
+obj-$(CONFIG_NOA1305)		+= noa1305.o
 obj-$(CONFIG_OPT3001)		+= opt3001.o
 obj-$(CONFIG_PA12203001)	+= pa12203001.o
 obj-$(CONFIG_RPR0521)		+= rpr0521.o
diff --git a/drivers/iio/light/apds9960.c b/drivers/iio/light/apds9960.c
index b09b8b60bd83..c5dfb9a6b5a1 100644
--- a/drivers/iio/light/apds9960.c
+++ b/drivers/iio/light/apds9960.c
@@ -1135,5 +1135,5 @@ static struct i2c_driver apds9960_driver = {
 module_i2c_driver(apds9960_driver);
 
 MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
-MODULE_DESCRIPTION("ADPS9960 Gesture/RGB/ALS/Proximity sensor");
+MODULE_DESCRIPTION("APDS9960 Gesture/RGB/ALS/Proximity sensor");
 MODULE_LICENSE("GPL");
diff --git a/drivers/iio/light/cm3323.c b/drivers/iio/light/cm3323.c
index 50f3438c2b49..0443861ba1ec 100644
--- a/drivers/iio/light/cm3323.c
+++ b/drivers/iio/light/cm3323.c
@@ -101,15 +101,16 @@ static int cm3323_init(struct iio_dev *indio_dev)
 	return 0;
 }
 
-static void cm3323_disable(struct iio_dev *indio_dev)
+static void cm3323_disable(void *data)
 {
 	int ret;
-	struct cm3323_data *data = iio_priv(indio_dev);
+	struct iio_dev *indio_dev = data;
+	struct cm3323_data *cm_data = iio_priv(indio_dev);
 
-	ret = i2c_smbus_write_word_data(data->client, CM3323_CMD_CONF,
+	ret = i2c_smbus_write_word_data(cm_data->client, CM3323_CMD_CONF,
 					CM3323_CONF_SD_BIT);
 	if (ret < 0)
-		dev_err(&data->client->dev, "Error writing reg_conf\n");
+		dev_err(&cm_data->client->dev, "Error writing reg_conf\n");
 }
 
 static int cm3323_set_it_bits(struct cm3323_data *data, int val, int val2)
@@ -243,26 +244,11 @@ static int cm3323_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&client->dev, "failed to register iio dev\n");
-		goto err_init;
-	}
-
-	return 0;
-err_init:
-	cm3323_disable(indio_dev);
-	return ret;
-}
-
-static int cm3323_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-
-	iio_device_unregister(indio_dev);
-	cm3323_disable(indio_dev);
+	ret = devm_add_action_or_reset(&client->dev, cm3323_disable, indio_dev);
+	if (ret < 0)
+		return ret;
 
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct i2c_device_id cm3323_id[] = {
@@ -276,7 +262,6 @@ static struct i2c_driver cm3323_driver = {
 		.name = CM3323_DRV_NAME,
 	},
 	.probe		= cm3323_probe,
-	.remove		= cm3323_remove,
 	.id_table	= cm3323_id,
 };
 
diff --git a/drivers/iio/light/cm36651.c b/drivers/iio/light/cm36651.c
index 7702c2bcbcfa..1019d625adb1 100644
--- a/drivers/iio/light/cm36651.c
+++ b/drivers/iio/light/cm36651.c
@@ -646,18 +646,18 @@ static int cm36651_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, indio_dev);
 
 	cm36651->client = client;
-	cm36651->ps_client = i2c_new_dummy(client->adapter,
+	cm36651->ps_client = i2c_new_dummy_device(client->adapter,
 						     CM36651_I2C_ADDR_PS);
-	if (!cm36651->ps_client) {
+	if (IS_ERR(cm36651->ps_client)) {
 		dev_err(&client->dev, "%s: new i2c device failed\n", __func__);
-		ret = -ENODEV;
+		ret = PTR_ERR(cm36651->ps_client);
 		goto error_disable_reg;
 	}
 
-	cm36651->ara_client = i2c_new_dummy(client->adapter, CM36651_ARA);
-	if (!cm36651->ara_client) {
+	cm36651->ara_client = i2c_new_dummy_device(client->adapter, CM36651_ARA);
+	if (IS_ERR(cm36651->ara_client)) {
 		dev_err(&client->dev, "%s: new i2c device failed\n", __func__);
-		ret = -ENODEV;
+		ret = PTR_ERR(cm36651->ara_client);
 		goto error_i2c_unregister_ps;
 	}
 
diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
index 308ee6ff2e22..44313a009928 100644
--- a/drivers/iio/light/cros_ec_light_prox.c
+++ b/drivers/iio/light/cros_ec_light_prox.c
@@ -42,7 +42,7 @@ static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
 	struct cros_ec_light_prox_state *st = iio_priv(indio_dev);
 	u16 data = 0;
 	s64 val64;
-	int ret = IIO_VAL_INT;
+	int ret;
 	int idx = chan->scan_index;
 
 	mutex_lock(&st->core.cmd_lock);
@@ -50,23 +50,22 @@ static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		if (chan->type == IIO_PROXIMITY) {
-			if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
-						     (s16 *)&data) < 0) {
-				ret = -EIO;
+			ret = cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
+						     (s16 *)&data);
+			if (ret)
 				break;
-			}
 			*val = data;
+			ret = IIO_VAL_INT;
 		} else {
 			ret = -EINVAL;
 		}
 		break;
 	case IIO_CHAN_INFO_PROCESSED:
 		if (chan->type == IIO_LIGHT) {
-			if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
-						     (s16 *)&data) < 0) {
-				ret = -EIO;
+			ret = cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
+						     (s16 *)&data);
+			if (ret)
 				break;
-			}
 			/*
 			 * The data coming from the light sensor is
 			 * pre-processed and represents the ambient light
@@ -82,15 +81,16 @@ static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
 		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
 		st->core.param.sensor_offset.flags = 0;
 
-		if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
-			ret = -EIO;
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret)
 			break;
-		}
 
 		/* Save values */
-		st->core.calib[0] = st->core.resp->sensor_offset.offset[0];
+		st->core.calib[0].offset =
+			st->core.resp->sensor_offset.offset[0];
 
-		*val = st->core.calib[idx];
+		*val = st->core.calib[idx].offset;
+		ret = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_CALIBSCALE:
 		/*
@@ -101,10 +101,9 @@ static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
 		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
 		st->core.param.sensor_range.data = EC_MOTION_SENSE_NO_VALUE;
 
-		if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
-			ret = -EIO;
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret)
 			break;
-		}
 
 		val64 = st->core.resp->sensor_range.ret;
 		*val = val64 >> 16;
@@ -127,28 +126,27 @@ static int cros_ec_light_prox_write(struct iio_dev *indio_dev,
 			       int val, int val2, long mask)
 {
 	struct cros_ec_light_prox_state *st = iio_priv(indio_dev);
-	int ret = 0;
+	int ret;
 	int idx = chan->scan_index;
 
 	mutex_lock(&st->core.cmd_lock);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_CALIBBIAS:
-		st->core.calib[idx] = val;
+		st->core.calib[idx].offset = val;
 		/* Send to EC for each axis, even if not complete */
 		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
 		st->core.param.sensor_offset.flags = MOTION_SENSE_SET_OFFSET;
-		st->core.param.sensor_offset.offset[0] = st->core.calib[0];
+		st->core.param.sensor_offset.offset[0] =
+			st->core.calib[0].offset;
 		st->core.param.sensor_offset.temp =
 					EC_MOTION_SENSE_INVALID_CALIB_TEMP;
-		if (cros_ec_motion_send_host_cmd(&st->core, 0))
-			ret = -EIO;
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
 		break;
 	case IIO_CHAN_INFO_CALIBSCALE:
 		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
 		st->core.param.sensor_range.data = (val << 16) | (val2 / 100);
-		if (cros_ec_motion_send_host_cmd(&st->core, 0))
-			ret = -EIO;
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
 		break;
 	default:
 		ret = cros_ec_sensors_core_write(&st->core, chan, val, val2,
@@ -164,6 +162,7 @@ static int cros_ec_light_prox_write(struct iio_dev *indio_dev,
 static const struct iio_info cros_ec_light_prox_info = {
 	.read_raw = &cros_ec_light_prox_read,
 	.write_raw = &cros_ec_light_prox_write,
+	.read_avail = &cros_ec_sensors_core_read_avail,
 };
 
 static int cros_ec_light_prox_probe(struct platform_device *pdev)
@@ -198,6 +197,8 @@ static int cros_ec_light_prox_probe(struct platform_device *pdev)
 	channel->info_mask_shared_by_all =
 		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
 		BIT(IIO_CHAN_INFO_FREQUENCY);
+	channel->info_mask_shared_by_all_available =
+		BIT(IIO_CHAN_INFO_SAMP_FREQ);
 	channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
 	channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
 	channel->scan_type.shift = 0;
@@ -205,8 +206,6 @@ static int cros_ec_light_prox_probe(struct platform_device *pdev)
 	channel->ext_info = cros_ec_sensors_ext_info;
 	channel->scan_type.sign = 'u';
 
-	state->core.calib[0] = 0;
-
 	/* Sensor specific */
 	switch (state->core.type) {
 	case MOTIONSENSE_TYPE_LIGHT:
diff --git a/drivers/iio/light/noa1305.c b/drivers/iio/light/noa1305.c
new file mode 100644
index 000000000000..7b859ae1044d
--- /dev/null
+++ b/drivers/iio/light/noa1305.c
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for ON Semiconductor NOA1305 ambient light sensor
+ *
+ * Copyright (C) 2016 Emcraft Systems
+ * Copyright (C) 2019 Collabora Ltd.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#define NOA1305_REG_POWER_CONTROL	0x0
+#define   NOA1305_POWER_CONTROL_DOWN	0x00
+#define   NOA1305_POWER_CONTROL_ON	0x08
+#define NOA1305_REG_RESET		0x1
+#define   NOA1305_RESET_RESET		0x10
+#define NOA1305_REG_INTEGRATION_TIME	0x2
+#define   NOA1305_INTEGR_TIME_800MS	0x00
+#define   NOA1305_INTEGR_TIME_400MS	0x01
+#define   NOA1305_INTEGR_TIME_200MS	0x02
+#define   NOA1305_INTEGR_TIME_100MS	0x03
+#define   NOA1305_INTEGR_TIME_50MS	0x04
+#define   NOA1305_INTEGR_TIME_25MS	0x05
+#define   NOA1305_INTEGR_TIME_12_5MS	0x06
+#define   NOA1305_INTEGR_TIME_6_25MS	0x07
+#define NOA1305_REG_INT_SELECT		0x3
+#define   NOA1305_INT_SEL_ACTIVE_HIGH	0x01
+#define   NOA1305_INT_SEL_ACTIVE_LOW	0x02
+#define   NOA1305_INT_SEL_INACTIVE	0x03
+#define NOA1305_REG_INT_THRESH_LSB	0x4
+#define NOA1305_REG_INT_THRESH_MSB	0x5
+#define NOA1305_REG_ALS_DATA_LSB	0x6
+#define NOA1305_REG_ALS_DATA_MSB	0x7
+#define NOA1305_REG_DEVICE_ID_LSB	0x8
+#define NOA1305_REG_DEVICE_ID_MSB	0x9
+
+#define NOA1305_DEVICE_ID	0x0519
+#define NOA1305_DRIVER_NAME	"noa1305"
+
+struct noa1305_priv {
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct regulator *vin_reg;
+};
+
+static int noa1305_measure(struct noa1305_priv *priv)
+{
+	__le16 data;
+	int ret;
+
+	ret = regmap_bulk_read(priv->regmap, NOA1305_REG_ALS_DATA_LSB, &data,
+			       2);
+	if (ret < 0)
+		return ret;
+
+	return le16_to_cpu(data);
+}
+
+static int noa1305_scale(struct noa1305_priv *priv, int *val, int *val2)
+{
+	int data;
+	int ret;
+
+	ret = regmap_read(priv->regmap, NOA1305_REG_INTEGRATION_TIME, &data);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Lux = count / (<Integration Constant> * <Integration Time>)
+	 *
+	 * Integration Constant = 7.7
+	 * Integration Time in Seconds
+	 */
+	switch (data) {
+	case NOA1305_INTEGR_TIME_800MS:
+		*val = 100;
+		*val2 = 77 * 8;
+		break;
+	case NOA1305_INTEGR_TIME_400MS:
+		*val = 100;
+		*val2 = 77 * 4;
+	case NOA1305_INTEGR_TIME_200MS:
+		*val = 100;
+		*val2 = 77 * 2;
+		break;
+	case NOA1305_INTEGR_TIME_100MS:
+		*val = 100;
+		*val2 = 77;
+		break;
+	case NOA1305_INTEGR_TIME_50MS:
+		*val = 1000;
+		*val2 = 77 * 5;
+		break;
+	case NOA1305_INTEGR_TIME_25MS:
+		*val = 10000;
+		*val2 = 77 * 25;
+		break;
+	case NOA1305_INTEGR_TIME_12_5MS:
+		*val = 100000;
+		*val2 = 77 * 125;
+		break;
+	case NOA1305_INTEGR_TIME_6_25MS:
+		*val = 1000000;
+		*val2 = 77 * 625;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return IIO_VAL_FRACTIONAL;
+}
+
+static const struct iio_chan_spec noa1305_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+	}
+};
+
+static int noa1305_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	int ret = -EINVAL;
+	struct noa1305_priv *priv = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = noa1305_measure(priv);
+			if (ret < 0)
+				return ret;
+			*val = ret;
+			return IIO_VAL_INT;
+		default:
+			break;
+		}
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			return noa1305_scale(priv, val, val2);
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static const struct iio_info noa1305_info = {
+	.read_raw = noa1305_read_raw,
+};
+
+static bool noa1305_writable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case NOA1305_REG_POWER_CONTROL:
+	case NOA1305_REG_RESET:
+	case NOA1305_REG_INTEGRATION_TIME:
+	case NOA1305_REG_INT_SELECT:
+	case NOA1305_REG_INT_THRESH_LSB:
+	case NOA1305_REG_INT_THRESH_MSB:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config noa1305_regmap_config = {
+	.name = NOA1305_DRIVER_NAME,
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = NOA1305_REG_DEVICE_ID_MSB,
+	.writeable_reg = noa1305_writable_reg,
+};
+
+static void noa1305_reg_remove(void *data)
+{
+	struct noa1305_priv *priv = data;
+
+	regulator_disable(priv->vin_reg);
+}
+
+static int noa1305_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct noa1305_priv *priv;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	__le16 data;
+	unsigned int dev_id;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*priv));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	regmap = devm_regmap_init_i2c(client, &noa1305_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Regmap initialization failed.\n");
+		return PTR_ERR(regmap);
+	}
+
+	priv = iio_priv(indio_dev);
+
+	priv->vin_reg = devm_regulator_get(&client->dev, "vin");
+	if (IS_ERR(priv->vin_reg)) {
+		dev_err(&client->dev, "get regulator vin failed\n");
+		return PTR_ERR(priv->vin_reg);
+	}
+
+	ret = regulator_enable(priv->vin_reg);
+	if (ret) {
+		dev_err(&client->dev, "enable regulator vin failed\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&client->dev, noa1305_reg_remove, priv);
+	if (ret) {
+		dev_err(&client->dev, "addition of devm action failed\n");
+		return ret;
+	}
+
+	i2c_set_clientdata(client, indio_dev);
+	priv->client = client;
+	priv->regmap = regmap;
+
+	ret = regmap_bulk_read(regmap, NOA1305_REG_DEVICE_ID_LSB, &data, 2);
+	if (ret < 0) {
+		dev_err(&client->dev, "ID reading failed: %d\n", ret);
+		return ret;
+	}
+
+	dev_id = le16_to_cpu(data);
+	if (dev_id != NOA1305_DEVICE_ID) {
+		dev_err(&client->dev, "Unknown device ID: 0x%x\n", dev_id);
+		return -ENODEV;
+	}
+
+	ret = regmap_write(regmap, NOA1305_REG_POWER_CONTROL,
+			   NOA1305_POWER_CONTROL_ON);
+	if (ret < 0) {
+		dev_err(&client->dev, "Enabling power control failed\n");
+		return ret;
+	}
+
+	ret = regmap_write(regmap, NOA1305_REG_RESET, NOA1305_RESET_RESET);
+	if (ret < 0) {
+		dev_err(&client->dev, "Device reset failed\n");
+		return ret;
+	}
+
+	ret = regmap_write(regmap, NOA1305_REG_INTEGRATION_TIME,
+			   NOA1305_INTEGR_TIME_800MS);
+	if (ret < 0) {
+		dev_err(&client->dev, "Setting integration time failed\n");
+		return ret;
+	}
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &noa1305_info;
+	indio_dev->channels = noa1305_channels;
+	indio_dev->num_channels = ARRAY_SIZE(noa1305_channels);
+	indio_dev->name = NOA1305_DRIVER_NAME;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = devm_iio_device_register(&client->dev, indio_dev);
+	if (ret)
+		dev_err(&client->dev, "registering device failed\n");
+
+	return ret;
+}
+
+static const struct of_device_id noa1305_of_match[] = {
+	{ .compatible = "onnn,noa1305" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, noa1305_of_match);
+
+static const struct i2c_device_id noa1305_ids[] = {
+	{ "noa1305", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, noa1305_ids);
+
+static struct i2c_driver noa1305_driver = {
+	.driver = {
+		.name		= NOA1305_DRIVER_NAME,
+		.of_match_table	= noa1305_of_match,
+	},
+	.probe		= noa1305_probe,
+	.id_table	= noa1305_ids,
+};
+
+module_i2c_driver(noa1305_driver);
+
+MODULE_AUTHOR("Sergei Miroshnichenko <sergeimir@emcraft.com>");
+MODULE_AUTHOR("Martyn Welch <martyn.welch@collabora.com");
+MODULE_DESCRIPTION("ON Semiconductor NOA1305 ambient light sensor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/light/si1145.c b/drivers/iio/light/si1145.c
index 6579d2418814..982bba0c54e7 100644
--- a/drivers/iio/light/si1145.c
+++ b/drivers/iio/light/si1145.c
@@ -1261,7 +1261,7 @@ static int si1145_probe_trigger(struct iio_dev *indio_dev)
 		return ret;
 	}
 
-	ret = iio_trigger_register(trig);
+	ret = devm_iio_trigger_register(&client->dev, trig);
 	if (ret)
 		return ret;
 
@@ -1271,16 +1271,6 @@ static int si1145_probe_trigger(struct iio_dev *indio_dev)
 	return 0;
 }
 
-static void si1145_remove_trigger(struct iio_dev *indio_dev)
-{
-	struct si1145_data *data = iio_priv(indio_dev);
-
-	if (data->trig) {
-		iio_trigger_unregister(data->trig);
-		data->trig = NULL;
-	}
-}
-
 static int si1145_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
@@ -1332,7 +1322,8 @@ static int si1145_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+	ret = devm_iio_triggered_buffer_setup(&client->dev,
+		indio_dev, NULL,
 		si1145_trigger_handler, &si1145_buffer_setup_ops);
 	if (ret < 0)
 		return ret;
@@ -1340,23 +1331,12 @@ static int si1145_probe(struct i2c_client *client,
 	if (client->irq) {
 		ret = si1145_probe_trigger(indio_dev);
 		if (ret < 0)
-			goto error_free_buffer;
+			return ret;
 	} else {
 		dev_info(&client->dev, "no irq, using polling\n");
 	}
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0)
-		goto error_free_trigger;
-
-	return 0;
-
-error_free_trigger:
-	si1145_remove_trigger(indio_dev);
-error_free_buffer:
-	iio_triggered_buffer_cleanup(indio_dev);
-
-	return ret;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct i2c_device_id si1145_ids[] = {
@@ -1371,23 +1351,11 @@ static const struct i2c_device_id si1145_ids[] = {
 };
 MODULE_DEVICE_TABLE(i2c, si1145_ids);
 
-static int si1145_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-
-	iio_device_unregister(indio_dev);
-	si1145_remove_trigger(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-
-	return 0;
-}
-
 static struct i2c_driver si1145_driver = {
 	.driver = {
 		.name   = "si1145",
 	},
 	.probe  = si1145_probe,
-	.remove = si1145_remove,
 	.id_table = si1145_ids,
 };
 
diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c
index b955183edfe8..185c24a75ae6 100644
--- a/drivers/iio/light/stk3310.c
+++ b/drivers/iio/light/stk3310.c
@@ -679,9 +679,18 @@ static const struct acpi_device_id stk3310_acpi_id[] = {
 
 MODULE_DEVICE_TABLE(acpi, stk3310_acpi_id);
 
+static const struct of_device_id stk3310_of_match[] = {
+	{ .compatible = "sensortek,stk3310", },
+	{ .compatible = "sensortek,stk3311", },
+	{ .compatible = "sensortek,stk3335", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, stk3310_of_match);
+
 static struct i2c_driver stk3310_driver = {
 	.driver = {
 		.name = "stk3310",
+		.of_match_table = stk3310_of_match,
 		.pm = STK3310_PM_OPS,
 		.acpi_match_table = ACPI_PTR(stk3310_acpi_id),
 	},
diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c
index 83cece921843..be37fcbd4654 100644
--- a/drivers/iio/light/tsl2772.c
+++ b/drivers/iio/light/tsl2772.c
@@ -134,6 +134,12 @@ enum {
 	TSL2772_CHIP_SUSPENDED = 2
 };
 
+enum {
+	TSL2772_SUPPLY_VDD = 0,
+	TSL2772_SUPPLY_VDDIO = 1,
+	TSL2772_NUM_SUPPLIES = 2
+};
+
 /* Per-device data */
 struct tsl2772_als_info {
 	u16 als_ch0;
@@ -161,8 +167,7 @@ struct tsl2772_chip {
 	struct mutex prox_mutex;
 	struct mutex als_mutex;
 	struct i2c_client *client;
-	struct regulator *vdd_supply;
-	struct regulator *vddio_supply;
+	struct regulator_bulk_data supplies[TSL2772_NUM_SUPPLIES];
 	u16 prox_data;
 	struct tsl2772_als_info als_cur_info;
 	struct tsl2772_settings settings;
@@ -697,46 +702,7 @@ static void tsl2772_disable_regulators_action(void *_data)
 {
 	struct tsl2772_chip *chip = _data;
 
-	regulator_disable(chip->vdd_supply);
-	regulator_disable(chip->vddio_supply);
-}
-
-static int tsl2772_enable_regulator(struct tsl2772_chip *chip,
-				    struct regulator *regulator)
-{
-	int ret;
-
-	ret = regulator_enable(regulator);
-	if (ret < 0) {
-		dev_err(&chip->client->dev, "Failed to enable regulator: %d\n",
-			ret);
-		return ret;
-	}
-
-	return 0;
-}
-
-static struct regulator *tsl2772_get_regulator(struct tsl2772_chip *chip,
-					       char *name)
-{
-	struct regulator *regulator;
-	int ret;
-
-	regulator = devm_regulator_get(&chip->client->dev, name);
-	if (IS_ERR(regulator)) {
-		if (PTR_ERR(regulator) != -EPROBE_DEFER)
-			dev_err(&chip->client->dev,
-				"Failed to get %s regulator %d\n",
-				name, (int)PTR_ERR(regulator));
-
-		return regulator;
-	}
-
-	ret = tsl2772_enable_regulator(chip, regulator);
-	if (ret < 0)
-		return ERR_PTR(ret);
-
-	return regulator;
+	regulator_bulk_disable(ARRAY_SIZE(chip->supplies), chip->supplies);
 }
 
 static int tsl2772_chip_on(struct iio_dev *indio_dev)
@@ -860,6 +826,13 @@ static int tsl2772_chip_off(struct iio_dev *indio_dev)
 	return tsl2772_write_control_reg(chip, 0x00);
 }
 
+static void tsl2772_chip_off_action(void *data)
+{
+	struct iio_dev *indio_dev = data;
+
+	tsl2772_chip_off(indio_dev);
+}
+
 /**
  * tsl2772_invoke_change - power cycle the device to implement the user
  *                         parameters
@@ -1797,20 +1770,32 @@ static int tsl2772_probe(struct i2c_client *clientp,
 	chip->client = clientp;
 	i2c_set_clientdata(clientp, indio_dev);
 
-	chip->vddio_supply = tsl2772_get_regulator(chip, "vddio");
-	if (IS_ERR(chip->vddio_supply))
-		return PTR_ERR(chip->vddio_supply);
+	chip->supplies[TSL2772_SUPPLY_VDD].supply = "vdd";
+	chip->supplies[TSL2772_SUPPLY_VDDIO].supply = "vddio";
+
+	ret = devm_regulator_bulk_get(&clientp->dev,
+				      ARRAY_SIZE(chip->supplies),
+				      chip->supplies);
+	if (ret < 0) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(&clientp->dev,
+				"Failed to get regulators: %d\n",
+				ret);
+
+		return ret;
+	}
 
-	chip->vdd_supply = tsl2772_get_regulator(chip, "vdd");
-	if (IS_ERR(chip->vdd_supply)) {
-		regulator_disable(chip->vddio_supply);
-		return PTR_ERR(chip->vdd_supply);
+	ret = regulator_bulk_enable(ARRAY_SIZE(chip->supplies), chip->supplies);
+	if (ret < 0) {
+		dev_err(&clientp->dev, "Failed to enable regulators: %d\n",
+			ret);
+		return ret;
 	}
 
-	ret = devm_add_action(&clientp->dev, tsl2772_disable_regulators_action,
-			      chip);
+	ret = devm_add_action_or_reset(&clientp->dev,
+					tsl2772_disable_regulators_action,
+					chip);
 	if (ret < 0) {
-		tsl2772_disable_regulators_action(chip);
 		dev_err(&clientp->dev, "Failed to setup regulator cleanup action %d\n",
 			ret);
 		return ret;
@@ -1877,15 +1862,13 @@ static int tsl2772_probe(struct i2c_client *clientp,
 	if (ret < 0)
 		return ret;
 
-	ret = iio_device_register(indio_dev);
-	if (ret) {
-		tsl2772_chip_off(indio_dev);
-		dev_err(&clientp->dev,
-			"%s: iio registration failed\n", __func__);
+	ret = devm_add_action_or_reset(&clientp->dev,
+					tsl2772_chip_off_action,
+					indio_dev);
+	if (ret < 0)
 		return ret;
-	}
 
-	return 0;
+	return devm_iio_device_register(&clientp->dev, indio_dev);
 }
 
 static int tsl2772_suspend(struct device *dev)
@@ -1895,8 +1878,7 @@ static int tsl2772_suspend(struct device *dev)
 	int ret;
 
 	ret = tsl2772_chip_off(indio_dev);
-	regulator_disable(chip->vdd_supply);
-	regulator_disable(chip->vddio_supply);
+	regulator_bulk_disable(ARRAY_SIZE(chip->supplies), chip->supplies);
 
 	return ret;
 }
@@ -1907,32 +1889,15 @@ static int tsl2772_resume(struct device *dev)
 	struct tsl2772_chip *chip = iio_priv(indio_dev);
 	int ret;
 
-	ret = tsl2772_enable_regulator(chip, chip->vddio_supply);
+	ret = regulator_bulk_enable(ARRAY_SIZE(chip->supplies), chip->supplies);
 	if (ret < 0)
 		return ret;
 
-	ret = tsl2772_enable_regulator(chip, chip->vdd_supply);
-	if (ret < 0) {
-		regulator_disable(chip->vddio_supply);
-		return ret;
-	}
-
 	usleep_range(TSL2772_BOOT_MIN_SLEEP_TIME, TSL2772_BOOT_MAX_SLEEP_TIME);
 
 	return tsl2772_chip_on(indio_dev);
 }
 
-static int tsl2772_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-
-	tsl2772_chip_off(indio_dev);
-
-	iio_device_unregister(indio_dev);
-
-	return 0;
-}
-
 static const struct i2c_device_id tsl2772_idtable[] = {
 	{ "tsl2571", tsl2571 },
 	{ "tsl2671", tsl2671 },
@@ -1979,7 +1944,6 @@ static struct i2c_driver tsl2772_driver = {
 	},
 	.id_table = tsl2772_idtable,
 	.probe = tsl2772_probe,
-	.remove = tsl2772_remove,
 };
 
 module_i2c_driver(tsl2772_driver);
diff --git a/drivers/iio/light/veml6070.c b/drivers/iio/light/veml6070.c
index a3138e1b5803..0be553ad5989 100644
--- a/drivers/iio/light/veml6070.c
+++ b/drivers/iio/light/veml6070.c
@@ -158,10 +158,10 @@ static int veml6070_probe(struct i2c_client *client,
 	indio_dev->name = VEML6070_DRV_NAME;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	data->client2 = i2c_new_dummy(client->adapter, VEML6070_ADDR_DATA_LSB);
-	if (!data->client2) {
+	data->client2 = i2c_new_dummy_device(client->adapter, VEML6070_ADDR_DATA_LSB);
+	if (IS_ERR(data->client2)) {
 		dev_err(&client->dev, "i2c device for second chip address failed\n");
-		return -ENODEV;
+		return PTR_ERR(data->client2);
 	}
 
 	data->config = VEML6070_IT_10 | VEML6070_COMMAND_RSRVD |
diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c
index 7de10281ad9e..425cdd07b4e5 100644
--- a/drivers/iio/magnetometer/mmc35240.c
+++ b/drivers/iio/magnetometer/mmc35240.c
@@ -53,7 +53,7 @@
 #define MMC35240_CTRL1_BW_SHIFT		0
 
 #define MMC35240_WAIT_CHARGE_PUMP	50000	/* us */
-#define MMC53240_WAIT_SET_RESET		1000	/* us */
+#define MMC35240_WAIT_SET_RESET		1000	/* us */
 
 /*
  * Memsic OTP process code piece is put here for reference:
@@ -225,7 +225,7 @@ static int mmc35240_init(struct mmc35240_data *data)
 	ret = mmc35240_hw_set(data, true);
 	if (ret < 0)
 		return ret;
-	usleep_range(MMC53240_WAIT_SET_RESET, MMC53240_WAIT_SET_RESET + 1);
+	usleep_range(MMC35240_WAIT_SET_RESET, MMC35240_WAIT_SET_RESET + 1);
 
 	ret = mmc35240_hw_set(data, false);
 	if (ret < 0)
diff --git a/drivers/iio/magnetometer/st_magn.h b/drivers/iio/magnetometer/st_magn.h
index d69ef9b2a731..204b285725c8 100644
--- a/drivers/iio/magnetometer/st_magn.h
+++ b/drivers/iio/magnetometer/st_magn.h
@@ -22,6 +22,7 @@
 #define LIS2MDL_MAGN_DEV_NAME		"lis2mdl"
 #define LSM9DS1_MAGN_DEV_NAME		"lsm9ds1_magn"
 
+const struct st_sensor_settings *st_magn_get_settings(const char *name);
 int st_magn_common_probe(struct iio_dev *indio_dev);
 void st_magn_common_remove(struct iio_dev *indio_dev);
 
diff --git a/drivers/iio/magnetometer/st_magn_buffer.c b/drivers/iio/magnetometer/st_magn_buffer.c
index 11d7806655bc..bb425c167a96 100644
--- a/drivers/iio/magnetometer/st_magn_buffer.c
+++ b/drivers/iio/magnetometer/st_magn_buffer.c
@@ -32,39 +32,32 @@ int st_magn_trig_set_state(struct iio_trigger *trig, bool state)
 static int st_magn_buffer_postenable(struct iio_dev *indio_dev)
 {
 	int err;
-	struct st_sensor_data *mdata = iio_priv(indio_dev);
-
-	mdata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
-	if (mdata->buffer_data == NULL) {
-		err = -ENOMEM;
-		goto allocate_memory_error;
-	}
 
 	err = iio_triggered_buffer_postenable(indio_dev);
 	if (err < 0)
-		goto st_magn_buffer_postenable_error;
+		return err;
+
+	err = st_sensors_set_enable(indio_dev, true);
+	if (err < 0)
+		goto st_magn_buffer_predisable;
 
-	return st_sensors_set_enable(indio_dev, true);
+	return 0;
 
-st_magn_buffer_postenable_error:
-	kfree(mdata->buffer_data);
-allocate_memory_error:
+st_magn_buffer_predisable:
+	iio_triggered_buffer_predisable(indio_dev);
 	return err;
 }
 
 static int st_magn_buffer_predisable(struct iio_dev *indio_dev)
 {
-	int err;
-	struct st_sensor_data *mdata = iio_priv(indio_dev);
+	int err, err2;
 
 	err = st_sensors_set_enable(indio_dev, false);
-	if (err < 0)
-		goto st_magn_buffer_predisable_error;
 
-	err = iio_triggered_buffer_predisable(indio_dev);
+	err2 = iio_triggered_buffer_predisable(indio_dev);
+	if (!err)
+		err = err2;
 
-st_magn_buffer_predisable_error:
-	kfree(mdata->buffer_data);
 	return err;
 }
 
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 2f7a1dbcdeb3..a3a268ee2896 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -12,7 +12,6 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/types.h>
-#include <linux/mutex.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
@@ -470,28 +469,41 @@ static const struct iio_trigger_ops st_magn_trigger_ops = {
 #define ST_MAGN_TRIGGER_OPS NULL
 #endif
 
+/*
+ * st_magn_get_settings() - get sensor settings from device name
+ * @name: device name buffer reference.
+ *
+ * Return: valid reference on success, NULL otherwise.
+ */
+const struct st_sensor_settings *st_magn_get_settings(const char *name)
+{
+	int index = st_sensors_get_settings_index(name,
+					st_magn_sensors_settings,
+					ARRAY_SIZE(st_magn_sensors_settings));
+	if (index < 0)
+		return NULL;
+
+	return &st_magn_sensors_settings[index];
+}
+EXPORT_SYMBOL(st_magn_get_settings);
+
 int st_magn_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *mdata = iio_priv(indio_dev);
-	int irq = mdata->get_irq_data_ready(indio_dev);
 	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &magn_info;
-	mutex_init(&mdata->tb.buf_lock);
 
 	err = st_sensors_power_enable(indio_dev);
 	if (err)
 		return err;
 
-	err = st_sensors_check_device_support(indio_dev,
-					ARRAY_SIZE(st_magn_sensors_settings),
-					st_magn_sensors_settings);
+	err = st_sensors_verify_id(indio_dev);
 	if (err < 0)
 		goto st_magn_power_off;
 
 	mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
-	mdata->multiread_bit = mdata->sensor_settings->multi_read_bit;
 	indio_dev->channels = mdata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
@@ -507,7 +519,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
 	if (err < 0)
 		goto st_magn_power_off;
 
-	if (irq > 0) {
+	if (mdata->irq > 0) {
 		err = st_sensors_allocate_trigger(indio_dev,
 						ST_MAGN_TRIGGER_OPS);
 		if (err < 0)
@@ -524,7 +536,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
 	return 0;
 
 st_magn_device_register_error:
-	if (irq > 0)
+	if (mdata->irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 st_magn_probe_trigger_error:
 	st_magn_deallocate_ring(indio_dev);
@@ -542,7 +554,7 @@ void st_magn_common_remove(struct iio_dev *indio_dev)
 	st_sensors_power_disable(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (mdata->get_irq_data_ready(indio_dev) > 0)
+	if (mdata->irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 
 	st_magn_deallocate_ring(indio_dev);
diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c
index 4d014fd1aeb0..fdba480a12be 100644
--- a/drivers/iio/magnetometer/st_magn_i2c.c
+++ b/drivers/iio/magnetometer/st_magn_i2c.c
@@ -55,21 +55,33 @@ MODULE_DEVICE_TABLE(of, st_magn_of_match);
 #endif
 
 static int st_magn_i2c_probe(struct i2c_client *client,
-						const struct i2c_device_id *id)
+			     const struct i2c_device_id *id)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *mdata;
+	struct iio_dev *indio_dev;
 	int err;
 
+	st_sensors_of_name_probe(&client->dev, st_magn_of_match,
+				 client->name, sizeof(client->name));
+
+	settings = st_magn_get_settings(client->name);
+	if (!settings) {
+		dev_err(&client->dev, "device name %s not recognized.\n",
+			client->name);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*mdata));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	mdata = iio_priv(indio_dev);
-	st_sensors_of_name_probe(&client->dev, st_magn_of_match,
-				 client->name, sizeof(client->name));
+	mdata->sensor_settings = (struct st_sensor_settings *)settings;
 
-	st_sensors_i2c_configure(indio_dev, client, mdata);
+	err = st_sensors_i2c_configure(indio_dev, client);
+	if (err < 0)
+		return err;
 
 	err = st_magn_common_probe(indio_dev);
 	if (err < 0)
diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
index 0d47070611b1..fbf909bde841 100644
--- a/drivers/iio/magnetometer/st_magn_spi.c
+++ b/drivers/iio/magnetometer/st_magn_spi.c
@@ -51,19 +51,31 @@ MODULE_DEVICE_TABLE(of, st_magn_of_match);
 
 static int st_magn_spi_probe(struct spi_device *spi)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *mdata;
+	struct iio_dev *indio_dev;
 	int err;
 
+	st_sensors_of_name_probe(&spi->dev, st_magn_of_match,
+				 spi->modalias, sizeof(spi->modalias));
+
+	settings = st_magn_get_settings(spi->modalias);
+	if (!settings) {
+		dev_err(&spi->dev, "device name %s not recognized.\n",
+			spi->modalias);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*mdata));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	mdata = iio_priv(indio_dev);
+	mdata->sensor_settings = (struct st_sensor_settings *)settings;
 
-	st_sensors_of_name_probe(&spi->dev, st_magn_of_match,
-				 spi->modalias, sizeof(spi->modalias));
-	st_sensors_spi_configure(indio_dev, spi, mdata);
+	err = st_sensors_spi_configure(indio_dev, spi);
+	if (err < 0)
+		return err;
 
 	err = st_magn_common_probe(indio_dev);
 	if (err < 0)
diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index ebc7c72a5e36..4cac0173db8b 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -26,6 +26,17 @@ config DS1803
 	  To compile this driver as a module, choose M here: the
 	  module will be called ds1803.
 
+config MAX5432
+	tristate "Maxim MAX5432-MAX5435 Digital Potentiometer driver"
+	depends on I2C
+	help
+	  Say yes here to build support for the Maxim
+	  MAX5432, MAX5433, MAX5434 and MAX5435 digital
+	  potentiometer chips.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called max5432.
+
 config MAX5481
 	tristate "Maxim MAX5481-MAX5484 Digital Potentiometer driver"
 	depends on SPI
diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
index 8ff55138cf12..091adf3cdd0b 100644
--- a/drivers/iio/potentiometer/Makefile
+++ b/drivers/iio/potentiometer/Makefile
@@ -6,6 +6,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD5272) += ad5272.o
 obj-$(CONFIG_DS1803) += ds1803.o
+obj-$(CONFIG_MAX5432) += max5432.o
 obj-$(CONFIG_MAX5481) += max5481.o
 obj-$(CONFIG_MAX5487) += max5487.o
 obj-$(CONFIG_MCP4018) += mcp4018.o
diff --git a/drivers/iio/potentiometer/max5432.c b/drivers/iio/potentiometer/max5432.c
new file mode 100644
index 000000000000..641b1821fdf6
--- /dev/null
+++ b/drivers/iio/potentiometer/max5432.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Maxim Integrated MAX5432-MAX5435 digital potentiometer driver
+ * Copyright (C) 2019 Martin Kaiser <martin@kaiser.cx>
+ *
+ * Datasheet:
+ * https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
+ */
+
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+/* All chip variants have 32 wiper positions. */
+#define MAX5432_MAX_POS 31
+
+#define MAX5432_OHM_50K   (50  * 1000)
+#define MAX5432_OHM_100K  (100 * 1000)
+
+/* Update the volatile (currently active) setting. */
+#define MAX5432_CMD_VREG  0x11
+
+struct max5432_data {
+	struct i2c_client *client;
+	unsigned long ohm;
+};
+
+static const struct iio_chan_spec max5432_channels[] = {
+	{
+		.type = IIO_RESISTANCE,
+		.indexed = 1,
+		.output = 1,
+		.channel = 0,
+		.address = MAX5432_CMD_VREG,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+	}
+};
+
+static int max5432_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask)
+{
+	struct max5432_data *data = iio_priv(indio_dev);
+
+	if (mask != IIO_CHAN_INFO_SCALE)
+		return -EINVAL;
+
+	if (unlikely(data->ohm > INT_MAX))
+		return -ERANGE;
+
+	*val = data->ohm;
+	*val2 = MAX5432_MAX_POS;
+
+	return IIO_VAL_FRACTIONAL;
+}
+
+static int max5432_write_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int val, int val2, long mask)
+{
+	struct max5432_data *data = iio_priv(indio_dev);
+	u8 data_byte;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	if (val < 0 || val > MAX5432_MAX_POS)
+		return -EINVAL;
+
+	if (val2 != 0)
+		return -EINVAL;
+
+	/* Wiper position is in bits D7-D3. (D2-D0 are don't care bits.) */
+	data_byte = val << 3;
+	return i2c_smbus_write_byte_data(data->client, chan->address,
+			data_byte);
+}
+
+static const struct iio_info max5432_info = {
+	.read_raw = max5432_read_raw,
+	.write_raw = max5432_write_raw,
+};
+
+static int max5432_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct max5432_data *data;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(struct max5432_data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	data->ohm = (unsigned long)of_device_get_match_data(dev);
+
+	indio_dev->dev.parent = dev;
+	indio_dev->info = &max5432_info;
+	indio_dev->channels = max5432_channels;
+	indio_dev->num_channels = ARRAY_SIZE(max5432_channels);
+	indio_dev->name = client->name;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id max5432_dt_ids[] = {
+	{ .compatible = "maxim,max5432", .data = (void *)MAX5432_OHM_50K  },
+	{ .compatible = "maxim,max5433", .data = (void *)MAX5432_OHM_100K },
+	{ .compatible = "maxim,max5434", .data = (void *)MAX5432_OHM_50K  },
+	{ .compatible = "maxim,max5435", .data = (void *)MAX5432_OHM_100K },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max5432_dt_ids);
+
+static struct i2c_driver max5432_driver = {
+	.driver = {
+		.name = "max5432",
+		.of_match_table = of_match_ptr(max5432_dt_ids),
+	},
+	.probe = max5432_probe,
+};
+
+module_i2c_driver(max5432_driver);
+
+MODULE_AUTHOR("Martin Kaiser <martin@kaiser.cx>");
+MODULE_DESCRIPTION("max5432-max5435 digital potentiometers");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
index 034ce98d6e97..70148624db64 100644
--- a/drivers/iio/pressure/cros_ec_baro.c
+++ b/drivers/iio/pressure/cros_ec_baro.c
@@ -39,26 +39,29 @@ static int cros_ec_baro_read(struct iio_dev *indio_dev,
 {
 	struct cros_ec_baro_state *st = iio_priv(indio_dev);
 	u16 data = 0;
-	int ret = IIO_VAL_INT;
+	int ret;
 	int idx = chan->scan_index;
 
 	mutex_lock(&st->core.cmd_lock);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
-					     (s16 *)&data) < 0)
-			ret = -EIO;
+		ret = cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
+					     (s16 *)&data);
+		if (ret)
+			break;
+
 		*val = data;
+		ret = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
 		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
 		st->core.param.sensor_range.data = EC_MOTION_SENSE_NO_VALUE;
 
-		if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
-			ret = -EIO;
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret)
 			break;
-		}
+
 		*val = st->core.resp->sensor_range.ret;
 
 		/* scale * in_pressure_raw --> kPa */
@@ -152,8 +155,6 @@ static int cros_ec_baro_probe(struct platform_device *pdev)
 	channel->ext_info = cros_ec_sensors_ext_info;
 	channel->scan_type.sign = 'u';
 
-	state->core.calib[0] = 0;
-
 	/* Sensor specific */
 	switch (state->core.type) {
 	case MOTIONSENSE_TYPE_BARO:
diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c
index f00102577fd5..026ba15ef68f 100644
--- a/drivers/iio/pressure/hp03.c
+++ b/drivers/iio/pressure/hp03.c
@@ -243,10 +243,10 @@ static int hp03_probe(struct i2c_client *client,
 	 * which has it's dedicated I2C address and contains
 	 * the calibration constants for the sensor.
 	 */
-	priv->eeprom_client = i2c_new_dummy(client->adapter, HP03_EEPROM_ADDR);
-	if (!priv->eeprom_client) {
+	priv->eeprom_client = i2c_new_dummy_device(client->adapter, HP03_EEPROM_ADDR);
+	if (IS_ERR(priv->eeprom_client)) {
 		dev_err(dev, "New EEPROM I2C device failed\n");
-		return -ENODEV;
+		return PTR_ERR(priv->eeprom_client);
 	}
 
 	priv->eeprom_regmap = regmap_init_i2c(priv->eeprom_client,
diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h
index 6a720cfb5686..c2e47a6c3118 100644
--- a/drivers/iio/pressure/st_pressure.h
+++ b/drivers/iio/pressure/st_pressure.h
@@ -41,6 +41,7 @@ static const struct st_sensors_platform_data default_press_pdata = {
 	.drdy_int_pin = 1,
 };
 
+const struct st_sensor_settings *st_press_get_settings(const char *name);
 int st_press_common_probe(struct iio_dev *indio_dev);
 void st_press_common_remove(struct iio_dev *indio_dev);
 
diff --git a/drivers/iio/pressure/st_pressure_buffer.c b/drivers/iio/pressure/st_pressure_buffer.c
index 4566e08a64a1..418dbf9e6e1e 100644
--- a/drivers/iio/pressure/st_pressure_buffer.c
+++ b/drivers/iio/pressure/st_pressure_buffer.c
@@ -29,52 +29,39 @@ int st_press_trig_set_state(struct iio_trigger *trig, bool state)
 	return st_sensors_set_dataready_irq(indio_dev, state);
 }
 
-static int st_press_buffer_preenable(struct iio_dev *indio_dev)
-{
-	return st_sensors_set_enable(indio_dev, true);
-}
-
 static int st_press_buffer_postenable(struct iio_dev *indio_dev)
 {
 	int err;
-	struct st_sensor_data *press_data = iio_priv(indio_dev);
-
-	press_data->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
-	if (press_data->buffer_data == NULL) {
-		err = -ENOMEM;
-		goto allocate_memory_error;
-	}
 
 	err = iio_triggered_buffer_postenable(indio_dev);
 	if (err < 0)
-		goto st_press_buffer_postenable_error;
+		return err;
 
-	return err;
+	err = st_sensors_set_enable(indio_dev, true);
+	if (err < 0)
+		goto st_press_buffer_predisable;
 
-st_press_buffer_postenable_error:
-	kfree(press_data->buffer_data);
-allocate_memory_error:
+	return 0;
+
+st_press_buffer_predisable:
+	iio_triggered_buffer_predisable(indio_dev);
 	return err;
 }
 
 static int st_press_buffer_predisable(struct iio_dev *indio_dev)
 {
-	int err;
-	struct st_sensor_data *press_data = iio_priv(indio_dev);
-
-	err = iio_triggered_buffer_predisable(indio_dev);
-	if (err < 0)
-		goto st_press_buffer_predisable_error;
+	int err, err2;
 
 	err = st_sensors_set_enable(indio_dev, false);
 
-st_press_buffer_predisable_error:
-	kfree(press_data->buffer_data);
+	err2 = iio_triggered_buffer_predisable(indio_dev);
+	if (!err)
+		err = err2;
+
 	return err;
 }
 
 static const struct iio_buffer_setup_ops st_press_buffer_setup_ops = {
-	.preenable = &st_press_buffer_preenable,
 	.postenable = &st_press_buffer_postenable,
 	.predisable = &st_press_buffer_predisable,
 };
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index b960e76f7dfd..ca6863b32a5f 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -12,7 +12,6 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/types.h>
-#include <linux/mutex.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
@@ -664,25 +663,39 @@ static const struct iio_trigger_ops st_press_trigger_ops = {
 #define ST_PRESS_TRIGGER_OPS NULL
 #endif
 
+/*
+ * st_press_get_settings() - get sensor settings from device name
+ * @name: device name buffer reference.
+ *
+ * Return: valid reference on success, NULL otherwise.
+ */
+const struct st_sensor_settings *st_press_get_settings(const char *name)
+{
+	int index = st_sensors_get_settings_index(name,
+					st_press_sensors_settings,
+					ARRAY_SIZE(st_press_sensors_settings));
+	if (index < 0)
+		return NULL;
+
+	return &st_press_sensors_settings[index];
+}
+EXPORT_SYMBOL(st_press_get_settings);
+
 int st_press_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *press_data = iio_priv(indio_dev);
 	struct st_sensors_platform_data *pdata =
 		(struct st_sensors_platform_data *)press_data->dev->platform_data;
-	int irq = press_data->get_irq_data_ready(indio_dev);
 	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &press_info;
-	mutex_init(&press_data->tb.buf_lock);
 
 	err = st_sensors_power_enable(indio_dev);
 	if (err)
 		return err;
 
-	err = st_sensors_check_device_support(indio_dev,
-					ARRAY_SIZE(st_press_sensors_settings),
-					st_press_sensors_settings);
+	err = st_sensors_verify_id(indio_dev);
 	if (err < 0)
 		goto st_press_power_off;
 
@@ -693,7 +706,6 @@ int st_press_common_probe(struct iio_dev *indio_dev)
 	 * element.
 	 */
 	press_data->num_data_channels = press_data->sensor_settings->num_ch - 1;
-	press_data->multiread_bit = press_data->sensor_settings->multi_read_bit;
 	indio_dev->channels = press_data->sensor_settings->ch;
 	indio_dev->num_channels = press_data->sensor_settings->num_ch;
 
@@ -716,7 +728,7 @@ int st_press_common_probe(struct iio_dev *indio_dev)
 	if (err < 0)
 		goto st_press_power_off;
 
-	if (irq > 0) {
+	if (press_data->irq > 0) {
 		err = st_sensors_allocate_trigger(indio_dev,
 						  ST_PRESS_TRIGGER_OPS);
 		if (err < 0)
@@ -733,7 +745,7 @@ int st_press_common_probe(struct iio_dev *indio_dev)
 	return err;
 
 st_press_device_register_error:
-	if (irq > 0)
+	if (press_data->irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 st_press_probe_trigger_error:
 	st_press_deallocate_ring(indio_dev);
@@ -751,7 +763,7 @@ void st_press_common_remove(struct iio_dev *indio_dev)
 	st_sensors_power_disable(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (press_data->get_irq_data_ready(indio_dev) > 0)
+	if (press_data->irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 
 	st_press_deallocate_ring(indio_dev);
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index b7d9ba706abc..71d2ed6b4948 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -78,18 +78,13 @@ static const struct i2c_device_id st_press_id_table[] = {
 MODULE_DEVICE_TABLE(i2c, st_press_id_table);
 
 static int st_press_i2c_probe(struct i2c_client *client,
-						const struct i2c_device_id *id)
+			      const struct i2c_device_id *id)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *press_data;
+	struct iio_dev *indio_dev;
 	int ret;
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*press_data));
-	if (!indio_dev)
-		return -ENOMEM;
-
-	press_data = iio_priv(indio_dev);
-
 	if (client->dev.of_node) {
 		st_sensors_of_name_probe(&client->dev, st_press_of_match,
 					 client->name, sizeof(client->name));
@@ -99,11 +94,27 @@ static int st_press_i2c_probe(struct i2c_client *client,
 			return -ENODEV;
 
 		strlcpy(client->name, st_press_id_table[ret].name,
-				sizeof(client->name));
+			sizeof(client->name));
 	} else if (!id)
 		return -ENODEV;
 
-	st_sensors_i2c_configure(indio_dev, client, press_data);
+	settings = st_press_get_settings(client->name);
+	if (!settings) {
+		dev_err(&client->dev, "device name %s not recognized.\n",
+			client->name);
+		return -ENODEV;
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*press_data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	press_data = iio_priv(indio_dev);
+	press_data->sensor_settings = (struct st_sensor_settings *)settings;
+
+	ret = st_sensors_i2c_configure(indio_dev, client);
+	if (ret < 0)
+		return ret;
 
 	ret = st_press_common_probe(indio_dev);
 	if (ret < 0)
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index ef61401c41d3..7c8b70221e70 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -61,19 +61,31 @@ MODULE_DEVICE_TABLE(of, st_press_of_match);
 
 static int st_press_spi_probe(struct spi_device *spi)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *press_data;
+	struct iio_dev *indio_dev;
 	int err;
 
+	st_sensors_of_name_probe(&spi->dev, st_press_of_match,
+				 spi->modalias, sizeof(spi->modalias));
+
+	settings = st_press_get_settings(spi->modalias);
+	if (!settings) {
+		dev_err(&spi->dev, "device name %s not recognized.\n",
+			spi->modalias);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*press_data));
-	if (indio_dev == NULL)
+	if (!indio_dev)
 		return -ENOMEM;
 
 	press_data = iio_priv(indio_dev);
+	press_data->sensor_settings = (struct st_sensor_settings *)settings;
 
-	st_sensors_of_name_probe(&spi->dev, st_press_of_match,
-				 spi->modalias, sizeof(spi->modalias));
-	st_sensors_spi_configure(indio_dev, spi, press_data);
+	err = st_sensors_spi_configure(indio_dev, spi);
+	if (err < 0)
+		return err;
 
 	err = st_press_common_probe(indio_dev);
 	if (err < 0)
diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c
index c613a64c017f..2ab68282d0b6 100644
--- a/drivers/iio/temperature/maxim_thermocouple.c
+++ b/drivers/iio/temperature/maxim_thermocouple.c
@@ -230,31 +230,13 @@ static int maxim_thermocouple_probe(struct spi_device *spi)
 	data->spi = spi;
 	data->chip = chip;
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+	ret = devm_iio_triggered_buffer_setup(&spi->dev,
+				indio_dev, NULL,
 				maxim_thermocouple_trigger_handler, NULL);
 	if (ret)
 		return ret;
 
-	ret = iio_device_register(indio_dev);
-	if (ret)
-		goto error_unreg_buffer;
-
-	return 0;
-
-error_unreg_buffer:
-	iio_triggered_buffer_cleanup(indio_dev);
-
-	return ret;
-}
-
-static int maxim_thermocouple_remove(struct spi_device *spi)
-{
-	struct iio_dev *indio_dev = spi_get_drvdata(spi);
-
-	iio_device_unregister(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-
-	return 0;
+	return devm_iio_device_register(&spi->dev, indio_dev);
 }
 
 static const struct spi_device_id maxim_thermocouple_id[] = {
@@ -277,7 +259,6 @@ static struct spi_driver maxim_thermocouple_driver = {
 		.of_match_table = maxim_thermocouple_of_match,
 	},
 	.probe		= maxim_thermocouple_probe,
-	.remove		= maxim_thermocouple_remove,
 	.id_table	= maxim_thermocouple_id,
 };
 module_spi_driver(maxim_thermocouple_driver);
diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c
index ccf1ce653b25..a5dfe65cd9b9 100644
--- a/drivers/iio/trigger/stm32-timer-trigger.c
+++ b/drivers/iio/trigger/stm32-timer-trigger.c
@@ -608,86 +608,6 @@ static const struct iio_enum stm32_enable_mode_enum = {
 	.get = stm32_get_enable_mode
 };
 
-static const char *const stm32_quadrature_modes[] = {
-	"channel_A",
-	"channel_B",
-	"quadrature",
-};
-
-static int stm32_set_quadrature_mode(struct iio_dev *indio_dev,
-				     const struct iio_chan_spec *chan,
-				     unsigned int mode)
-{
-	struct stm32_timer_trigger *priv = iio_priv(indio_dev);
-
-	regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, mode + 1);
-
-	return 0;
-}
-
-static int stm32_get_quadrature_mode(struct iio_dev *indio_dev,
-				     const struct iio_chan_spec *chan)
-{
-	struct stm32_timer_trigger *priv = iio_priv(indio_dev);
-	u32 smcr;
-	int mode;
-
-	regmap_read(priv->regmap, TIM_SMCR, &smcr);
-	mode = (smcr & TIM_SMCR_SMS) - 1;
-	if ((mode < 0) || (mode > ARRAY_SIZE(stm32_quadrature_modes)))
-		return -EINVAL;
-
-	return mode;
-}
-
-static const struct iio_enum stm32_quadrature_mode_enum = {
-	.items = stm32_quadrature_modes,
-	.num_items = ARRAY_SIZE(stm32_quadrature_modes),
-	.set = stm32_set_quadrature_mode,
-	.get = stm32_get_quadrature_mode
-};
-
-static const char *const stm32_count_direction_states[] = {
-	"up",
-	"down"
-};
-
-static int stm32_set_count_direction(struct iio_dev *indio_dev,
-				     const struct iio_chan_spec *chan,
-				     unsigned int dir)
-{
-	struct stm32_timer_trigger *priv = iio_priv(indio_dev);
-	u32 val;
-	int mode;
-
-	/* In encoder mode, direction is RO (given by TI1/TI2 signals) */
-	regmap_read(priv->regmap, TIM_SMCR, &val);
-	mode = (val & TIM_SMCR_SMS) - 1;
-	if ((mode >= 0) || (mode < ARRAY_SIZE(stm32_quadrature_modes)))
-		return -EBUSY;
-
-	return regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_DIR,
-				  dir ? TIM_CR1_DIR : 0);
-}
-
-static int stm32_get_count_direction(struct iio_dev *indio_dev,
-				     const struct iio_chan_spec *chan)
-{
-	struct stm32_timer_trigger *priv = iio_priv(indio_dev);
-	u32 cr1;
-
-	regmap_read(priv->regmap, TIM_CR1, &cr1);
-
-	return ((cr1 & TIM_CR1_DIR) ? 1 : 0);
-}
-
-static const struct iio_enum stm32_count_direction_enum = {
-	.items = stm32_count_direction_states,
-	.num_items = ARRAY_SIZE(stm32_count_direction_states),
-	.set = stm32_set_count_direction,
-	.get = stm32_get_count_direction
-};
-
 static ssize_t stm32_count_get_preset(struct iio_dev *indio_dev,
 				      uintptr_t private,
 				      const struct iio_chan_spec *chan,
@@ -728,10 +648,6 @@ static const struct iio_chan_spec_ext_info stm32_trigger_count_info[] = {
 		.read = stm32_count_get_preset,
 		.write = stm32_count_set_preset
 	},
-	IIO_ENUM("count_direction", IIO_SEPARATE, &stm32_count_direction_enum),
-	IIO_ENUM_AVAILABLE("count_direction", &stm32_count_direction_enum),
-	IIO_ENUM("quadrature_mode", IIO_SEPARATE, &stm32_quadrature_mode_enum),
-	IIO_ENUM_AVAILABLE("quadrature_mode", &stm32_quadrature_mode_enum),
 	IIO_ENUM("enable_mode", IIO_SEPARATE, &stm32_enable_mode_enum),
 	IIO_ENUM_AVAILABLE("enable_mode", &stm32_enable_mode_enum),
 	IIO_ENUM("trigger_mode", IIO_SEPARATE, &stm32_trigger_mode_enum),
diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index b6d12fe7c12a..df06e0570f9b 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -809,11 +809,23 @@ static const struct spi_device_id ad7192_id[] = {
 	{"ad7195", ID_AD7195},
 	{}
 };
+
 MODULE_DEVICE_TABLE(spi, ad7192_id);
 
+static const struct of_device_id ad7192_of_match[] = {
+	{ .compatible = "adi,ad7190" },
+	{ .compatible = "adi,ad7192" },
+	{ .compatible = "adi,ad7193" },
+	{ .compatible = "adi,ad7195" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, ad7192_of_match);
+
 static struct spi_driver ad7192_driver = {
 	.driver = {
 		.name	= "ad7192",
+		.of_match_table = ad7192_of_match,
 	},
 	.probe		= ad7192_probe,
 	.remove		= ad7192_remove,
diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index 0c1bd108c386..4b25a3a314ed 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -671,7 +671,7 @@ static int ad2s1210_probe(struct spi_device *spi)
 	indio_dev->num_channels = ARRAY_SIZE(ad2s1210_channels);
 	indio_dev->name = spi_get_device_id(spi)->name;
 
-	ret = iio_device_register(indio_dev);
+	ret = devm_iio_device_register(&spi->dev, indio_dev);
 	if (ret)
 		return ret;
 
@@ -683,15 +683,6 @@ static int ad2s1210_probe(struct spi_device *spi)
 	return 0;
 }
 
-static int ad2s1210_remove(struct spi_device *spi)
-{
-	struct iio_dev *indio_dev = spi_get_drvdata(spi);
-
-	iio_device_unregister(indio_dev);
-
-	return 0;
-}
-
 static const struct of_device_id ad2s1210_of_match[] = {
 	{ .compatible = "adi,ad2s1210", },
 	{ }
@@ -710,7 +701,6 @@ static struct spi_driver ad2s1210_driver = {
 		.of_match_table = of_match_ptr(ad2s1210_of_match),
 	},
 	.probe = ad2s1210_probe,
-	.remove = ad2s1210_remove,
 	.id_table = ad2s1210_id,
 };
 module_spi_driver(ad2s1210_driver);