summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorPeter Tyser <ptyser@xes-inc.com>2011-01-11 00:34:14 +0100
committerGreg Kroah-Hartman <gregkh@suse.de>2011-01-23 03:38:58 +0100
commitcc604ddd118cf4a699c12bc41a5fa2d2f225f702 (patch)
tree6efdd3c28567a7cbdb030a08f1a27b95f88364ce /drivers
parentUSB: g_printer: fix bug in module parameter definitions (diff)
downloadlinux-cc604ddd118cf4a699c12bc41a5fa2d2f225f702.tar.xz
linux-cc604ddd118cf4a699c12bc41a5fa2d2f225f702.zip
USB: ehci-fsl: Fix 'have_sysif_regs' detection
Previously a check was done on an ID register at the base of a CPU's internal USB registers to determine if system interface regsiters were present. The check looked for an ID register that had the format ID[0:5] == ~ID[8:13] as described in the MPC5121 User's Manual to determine if a MPC5121 or MPC83xx/85xx was being used. There are two issues with this method: - The ID register is not defined on the MPC83xx/85xx CPUs, so its unclear what is being checked on them. - Newer CPUs such as the P4080 also don't document the ID register, but do share the same format as the MPC5121. Thus the previous code did not set 'have_sysif_regs' properly which results in the P4080 not properly initializing its USB ports. Using the device tree 'compatible' node is a cleaner way to determine if 'have_sysif_regs' should be set and resolves the USB initialization issue seen on the P4080. Tested on a P4080-based system and compile tested on mpc512x_defconfig with Freescale EHCI driver enabled. Cc: Anatolij Gustschin <agust@denx.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/host/ehci-fsl.c13
-rw-r--r--drivers/usb/host/ehci-fsl.h3
-rw-r--r--drivers/usb/host/fsl-mph-dr-of.c11
3 files changed, 8 insertions, 19 deletions
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 86e42892016d..5c761df7fa83 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -52,7 +52,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
struct resource *res;
int irq;
int retval;
- unsigned int temp;
pr_debug("initializing FSL-SOC USB Controller\n");
@@ -126,18 +125,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
goto err3;
}
- /*
- * Check if it is MPC5121 SoC, otherwise set pdata->have_sysif_regs
- * flag for 83xx or 8536 system interface registers.
- */
- if (pdata->big_endian_mmio)
- temp = in_be32(hcd->regs + FSL_SOC_USB_ID);
- else
- temp = in_le32(hcd->regs + FSL_SOC_USB_ID);
-
- if ((temp & ID_MSK) != (~((temp & NID_MSK) >> 8) & ID_MSK))
- pdata->have_sysif_regs = 1;
-
/* Enable USB controller, 83xx or 8536 */
if (pdata->have_sysif_regs)
setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index 2c8353795226..3fabed33d940 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -19,9 +19,6 @@
#define _EHCI_FSL_H
/* offsets for the non-ehci registers in the FSL SOC USB controller */
-#define FSL_SOC_USB_ID 0x0
-#define ID_MSK 0x3f
-#define NID_MSK 0x3f00
#define FSL_SOC_USB_ULPIVP 0x170
#define FSL_SOC_USB_PORTSC1 0x184
#define PORT_PTS_MSK (3<<30)
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 574b99ea0700..79a66d622f9c 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -262,19 +262,24 @@ static void fsl_usb2_mpc5121_exit(struct platform_device *pdev)
}
}
-struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
+static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
.big_endian_desc = 1,
.big_endian_mmio = 1,
.es = 1,
+ .have_sysif_regs = 0,
.le_setup_buf = 1,
.init = fsl_usb2_mpc5121_init,
.exit = fsl_usb2_mpc5121_exit,
};
#endif /* CONFIG_PPC_MPC512x */
+static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = {
+ .have_sysif_regs = 1,
+};
+
static const struct of_device_id fsl_usb2_mph_dr_of_match[] = {
- { .compatible = "fsl-usb2-mph", },
- { .compatible = "fsl-usb2-dr", },
+ { .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, },
+ { .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, },
#ifdef CONFIG_PPC_MPC512x
{ .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, },
#endif