mmc: dw_mmc: move rockchip related code to a separate file

To support HS200 and UHS-1, we need add a big hunk of code,
as shown in the following patches. So a separate file for
rockchip SOCs is suitable.

Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

4 files changed, 146 insertions, 57 deletions

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index a43295c49a44..13860656104b 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -638,6 +638,15 @@ config MMC_DW_PCI
 
 	  If unsure, say N.
 
+config MMC_DW_ROCKCHIP
+	tristate "Rockchip specific extensions for Synopsys DW Memory Card Interface"
+	depends on MMC_DW && ARCH_ROCKCHIP
+	select MMC_DW_PLTFM
+	help
+	  This selects support for Rockchip SoC specific extensions to the
+	  Synopsys DesignWare Memory Card Interface driver. Select this option
+	  for platforms based on RK3066, RK3188 and RK3288 SoC's.
+
 config MMC_SH_MMCIF
 	tristate "SuperH Internal MMCIF support"
 	depends on MMC_BLOCK && HAS_DMA
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 2d223463e6c5..b09ecfb88269 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_MMC_DW_PLTFM)	+= dw_mmc-pltfm.o
 obj-$(CONFIG_MMC_DW_EXYNOS)	+= dw_mmc-exynos.o
 obj-$(CONFIG_MMC_DW_K3)		+= dw_mmc-k3.o
 obj-$(CONFIG_MMC_DW_PCI)	+= dw_mmc-pci.o
+obj-$(CONFIG_MMC_DW_ROCKCHIP)	+= dw_mmc-rockchip.o
 obj-$(CONFIG_MMC_SH_MMCIF)	+= sh_mmcif.o
 obj-$(CONFIG_MMC_JZ4740)	+= jz4740_mmc.o
 obj-$(CONFIG_MMC_VUB300)	+= vub300.o
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 1cd02828e5a3..8b6572162ed9 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -26,64 +26,11 @@
 #include "dw_mmc.h"
 #include "dw_mmc-pltfm.h"
 
-#define RK3288_CLKGEN_DIV	2
-
 static void dw_mci_pltfm_prepare_command(struct dw_mci *host, u32 *cmdr)
 {
 	*cmdr |= SDMMC_CMD_USE_HOLD_REG;
 }
 
-static int dw_mci_rk3288_setup_clock(struct dw_mci *host)
-{
-	host->bus_hz /= RK3288_CLKGEN_DIV;
-
-	return 0;
-}
-
-static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios)
-{
-	int ret;
-	unsigned int cclkin;
-	u32 bus_hz;
-
-	/*
-	 * cclkin: source clock of mmc controller.
-	 * bus_hz: card interface clock generated by CLKGEN.
-	 * bus_hz = cclkin / RK3288_CLKGEN_DIV;
-	 * ios->clock = (div == 0) ? bus_hz : (bus_hz / (2 * div))
-	 *
-	 * Note: div can only be 0 or 1
-	 *       if DDR50 8bit mode(only emmc work in 8bit mode),
-	 *       div must be set 1
-	 */
-	if ((ios->bus_width == MMC_BUS_WIDTH_8) &&
-	    (ios->timing == MMC_TIMING_MMC_DDR52))
-		cclkin = 2 * ios->clock * RK3288_CLKGEN_DIV;
-	else
-		cclkin = ios->clock * RK3288_CLKGEN_DIV;
-
-	ret = clk_set_rate(host->ciu_clk, cclkin);
-	if (ret)
-		dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
-
-	bus_hz = clk_get_rate(host->ciu_clk) / RK3288_CLKGEN_DIV;
-	if (bus_hz != host->bus_hz) {
-		host->bus_hz = bus_hz;
-		/* force dw_mci_setup_bus() */
-		host->current_speed = 0;
-	}
-}
-
-static const struct dw_mci_drv_data rk2928_drv_data = {
-	.prepare_command	= dw_mci_pltfm_prepare_command,
-};
-
-static const struct dw_mci_drv_data rk3288_drv_data = {
-	.prepare_command	= dw_mci_pltfm_prepare_command,
-	.set_ios	= dw_mci_rk3288_set_ios,
-	.setup_clock	= dw_mci_rk3288_setup_clock,
-};
-
 static const struct dw_mci_drv_data socfpga_drv_data = {
 	.prepare_command	= dw_mci_pltfm_prepare_command,
 };
@@ -141,10 +88,6 @@ EXPORT_SYMBOL_GPL(dw_mci_pltfm_pmops);
 
 static const struct of_device_id dw_mci_pltfm_match[] = {
 	{ .compatible = "snps,dw-mshc", },
-	{ .compatible = "rockchip,rk2928-dw-mshc",
-		.data = &rk2928_drv_data },
-	{ .compatible = "rockchip,rk3288-dw-mshc",
-		.data = &rk3288_drv_data },
 	{ .compatible = "altr,socfpga-dw-mshc",
 		.data = &socfpga_drv_data },
 	{},
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
new file mode 100644
index 000000000000..f0c2cb1a210d
--- /dev/null
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/dw_mmc.h>
+#include <linux/of_address.h>
+
+#include "dw_mmc.h"
+#include "dw_mmc-pltfm.h"
+
+#define RK3288_CLKGEN_DIV       2
+
+static void dw_mci_rockchip_prepare_command(struct dw_mci *host, u32 *cmdr)
+{
+	*cmdr |= SDMMC_CMD_USE_HOLD_REG;
+}
+
+static int dw_mci_rk3288_setup_clock(struct dw_mci *host)
+{
+	host->bus_hz /= RK3288_CLKGEN_DIV;
+
+	return 0;
+}
+
+static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+	int ret;
+	unsigned int cclkin;
+	u32 bus_hz;
+
+	/*
+	 * cclkin: source clock of mmc controller
+	 * bus_hz: card interface clock generated by CLKGEN
+	 * bus_hz = cclkin / RK3288_CLKGEN_DIV
+	 * ios->clock = (div == 0) ? bus_hz : (bus_hz / (2 * div))
+	 *
+	 * Note: div can only be 0 or 1
+	 *       if DDR50 8bit mode(only emmc work in 8bit mode),
+	 *       div must be set 1
+	 */
+	if (ios->bus_width == MMC_BUS_WIDTH_8 &&
+	    ios->timing == MMC_TIMING_MMC_DDR52)
+		cclkin = 2 * ios->clock * RK3288_CLKGEN_DIV;
+	else
+		cclkin = ios->clock * RK3288_CLKGEN_DIV;
+
+	ret = clk_set_rate(host->ciu_clk, cclkin);
+	if (ret)
+		dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
+
+	bus_hz = clk_get_rate(host->ciu_clk) / RK3288_CLKGEN_DIV;
+	if (bus_hz != host->bus_hz) {
+		host->bus_hz = bus_hz;
+		/* force dw_mci_setup_bus() */
+		host->current_speed = 0;
+	}
+}
+
+static const struct dw_mci_drv_data rk2928_drv_data = {
+	.prepare_command        = dw_mci_rockchip_prepare_command,
+};
+
+static const struct dw_mci_drv_data rk3288_drv_data = {
+	.prepare_command        = dw_mci_rockchip_prepare_command,
+	.set_ios		= dw_mci_rk3288_set_ios,
+	.setup_clock    = dw_mci_rk3288_setup_clock,
+};
+
+static const struct of_device_id dw_mci_rockchip_match[] = {
+	{ .compatible = "rockchip,rk2928-dw-mshc",
+		.data = &rk2928_drv_data },
+	{ .compatible = "rockchip,rk3288-dw-mshc",
+		.data = &rk3288_drv_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
+
+static int dw_mci_rockchip_probe(struct platform_device *pdev)
+{
+	const struct dw_mci_drv_data *drv_data;
+	const struct of_device_id *match;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	match = of_match_node(dw_mci_rockchip_match, pdev->dev.of_node);
+	drv_data = match->data;
+
+	return dw_mci_pltfm_register(pdev, drv_data);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dw_mci_rockchip_suspend(struct device *dev)
+{
+	struct dw_mci *host = dev_get_drvdata(dev);
+
+	return dw_mci_suspend(host);
+}
+
+static int dw_mci_rockchip_resume(struct device *dev)
+{
+	struct dw_mci *host = dev_get_drvdata(dev);
+
+	return dw_mci_resume(host);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(dw_mci_rockchip_pmops,
+			 dw_mci_rockchip_suspend,
+			 dw_mci_rockchip_resume);
+
+static struct platform_driver dw_mci_rockchip_pltfm_driver = {
+	.probe		= dw_mci_rockchip_probe,
+	.remove		= __exit_p(dw_mci_pltfm_remove),
+	.driver		= {
+		.name		= "dwmmc_rockchip",
+		.of_match_table	= dw_mci_rockchip_match,
+		.pm		= &dw_mci_rockchip_pmops,
+	},
+};
+
+module_platform_driver(dw_mci_rockchip_pltfm_driver);
+
+MODULE_AUTHOR("Addy Ke <addy.ke@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip Specific DW-MSHC Driver Extension");
+MODULE_ALIAS("platform:dwmmc-rockchip");
+MODULE_LICENSE("GPL v2");