diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-10-23 12:33:05 +0200 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-10-23 12:33:05 +0200 |
commit | 5805992184f97b7797f24b74d511825f8992861e (patch) | |
tree | aad1c893c3743a1840ebb84e3d96ceeb651e3599 /drivers | |
parent | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dto... (diff) | |
parent | usb: hub: Allow reset retry for USB2 devices on connect bounce (diff) | |
download | linux-5805992184f97b7797f24b74d511825f8992861e.tar.xz linux-5805992184f97b7797f24b74d511825f8992861e.zip |
Merge tag 'usb-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are a small number of USB and PHY driver fixes for 4.14-rc6
There is the usual musb and xhci fixes in here, as well as some needed
phy patches. Also is a nasty regression fix for usbfs that has started
to hit a lot of people using virtual machines.
All of these have been in linux-next with no reported problems"
* tag 'usb-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
usb: hub: Allow reset retry for USB2 devices on connect bounce
USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor()
MAINTAINERS: fix git tree url for musb module
usb: quirks: add quirk for WORLDE MINI MIDI keyboard
usb: musb: sunxi: Explicitly release USB PHY on exit
usb: musb: Check for host-mode using is_host_active() on reset interrupt
usb: musb: musb_cppi41: Configure the number of channels for DA8xx
usb: musb: musb_cppi41: Fix cppi41_set_dma_mode() for DA8xx
usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers
USB: musb: fix late external abort on suspend
USB: musb: fix session-bit runtime-PM quirk
usb: cdc_acm: Add quirk for Elatec TWN3
USB: devio: Revert "USB: devio: Don't corrupt user memory"
usb: xhci: Handle error condition in xhci_stop_device()
usb: xhci: Reset halted endpoint if trb is noop
xhci: Cleanup current_cmd in xhci_cleanup_command_queue()
xhci: Identify USB 3.1 capable hosts by their port protocol capability
USB: serial: metro-usb: add MS7820 device id
phy: rockchip-typec: Check for errors from tcphy_phy_init()
phy: rockchip-typec: Don't set the aux voltage swing to 400 mV
...
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 18 | ||||
-rw-r--r-- | drivers/phy/mediatek/phy-mtk-tphy.c | 3 | ||||
-rw-r--r-- | drivers/phy/rockchip/phy-rockchip-typec.c | 82 | ||||
-rw-r--r-- | drivers/phy/tegra/xusb.c | 2 | ||||
-rw-r--r-- | drivers/usb/class/cdc-acm.c | 3 | ||||
-rw-r--r-- | drivers/usb/core/config.c | 6 | ||||
-rw-r--r-- | drivers/usb/core/devio.c | 6 | ||||
-rw-r--r-- | drivers/usb/core/hub.c | 11 | ||||
-rw-r--r-- | drivers/usb/core/quirks.c | 4 | ||||
-rw-r--r-- | drivers/usb/host/xhci-hub.c | 23 | ||||
-rw-r--r-- | drivers/usb/host/xhci-ring.c | 21 | ||||
-rw-r--r-- | drivers/usb/host/xhci.c | 3 | ||||
-rw-r--r-- | drivers/usb/musb/musb_core.c | 21 | ||||
-rw-r--r-- | drivers/usb/musb/musb_core.h | 2 | ||||
-rw-r--r-- | drivers/usb/musb/musb_cppi41.c | 94 | ||||
-rw-r--r-- | drivers/usb/musb/sunxi.c | 2 | ||||
-rw-r--r-- | drivers/usb/serial/metro-usb.c | 1 |
17 files changed, 226 insertions, 76 deletions
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c index 73ebad6634a7..89c887ea5557 100644 --- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c @@ -111,6 +111,8 @@ #define MVEBU_COMPHY_CONF6_40B BIT(18) #define MVEBU_COMPHY_SELECTOR 0x1140 #define MVEBU_COMPHY_SELECTOR_PHY(n) ((n) * 0x4) +#define MVEBU_COMPHY_PIPE_SELECTOR 0x1144 +#define MVEBU_COMPHY_PIPE_SELECTOR_PIPE(n) ((n) * 0x4) #define MVEBU_COMPHY_LANES 6 #define MVEBU_COMPHY_PORTS 3 @@ -468,13 +470,17 @@ static int mvebu_comphy_power_on(struct phy *phy) { struct mvebu_comphy_lane *lane = phy_get_drvdata(phy); struct mvebu_comphy_priv *priv = lane->priv; - int ret; - u32 mux, val; + int ret, mux; + u32 val; mux = mvebu_comphy_get_mux(lane->id, lane->port, lane->mode); if (mux < 0) return -ENOTSUPP; + regmap_read(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, &val); + val &= ~(0xf << MVEBU_COMPHY_PIPE_SELECTOR_PIPE(lane->id)); + regmap_write(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, val); + regmap_read(priv->regmap, MVEBU_COMPHY_SELECTOR, &val); val &= ~(0xf << MVEBU_COMPHY_SELECTOR_PHY(lane->id)); val |= mux << MVEBU_COMPHY_SELECTOR_PHY(lane->id); @@ -526,6 +532,10 @@ static int mvebu_comphy_power_off(struct phy *phy) val &= ~(0xf << MVEBU_COMPHY_SELECTOR_PHY(lane->id)); regmap_write(priv->regmap, MVEBU_COMPHY_SELECTOR, val); + regmap_read(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, &val); + val &= ~(0xf << MVEBU_COMPHY_PIPE_SELECTOR_PIPE(lane->id)); + regmap_write(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, val); + return 0; } @@ -576,8 +586,8 @@ static int mvebu_comphy_probe(struct platform_device *pdev) return PTR_ERR(priv->regmap); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->base = devm_ioremap_resource(&pdev->dev, res); - if (!priv->base) - return -ENOMEM; + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); for_each_available_child_of_node(pdev->dev.of_node, child) { struct mvebu_comphy_lane *lane; diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index e3baad78521f..721a2a1c97ef 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -27,6 +27,7 @@ /* banks shared by multiple phys */ #define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */ #define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */ +#define SSUSB_SIFSLV_V1_CHIP 0x300 /* shared by u3 phys */ /* u2 phy bank */ #define SSUSB_SIFSLV_V1_U2PHY_COM 0x000 /* u3/pcie/sata phy banks */ @@ -762,7 +763,7 @@ static void phy_v1_banks_init(struct mtk_tphy *tphy, case PHY_TYPE_USB3: case PHY_TYPE_PCIE: u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC; - u3_banks->chip = NULL; + u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP; u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD; u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA; break; diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index 4d2c57f21d76..a958c9bced01 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -443,14 +443,34 @@ static inline int property_enable(struct rockchip_typec_phy *tcphy, return regmap_write(tcphy->grf_regs, reg->offset, val | mask); } +static void tcphy_dp_aux_set_flip(struct rockchip_typec_phy *tcphy) +{ + u16 tx_ana_ctrl_reg_1; + + /* + * Select the polarity of the xcvr: + * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull + * down aux_m) + * 0, Normal polarity (if TYPEC, pulls up aux_m and pulls down + * aux_p) + */ + tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1); + if (!tcphy->flip) + tx_ana_ctrl_reg_1 |= BIT(12); + else + tx_ana_ctrl_reg_1 &= ~BIT(12); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); +} + static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) { + u16 tx_ana_ctrl_reg_1; u16 rdata, rdata2, val; /* disable txda_cal_latch_en for rewrite the calibration values */ - rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); - val = rdata & 0xdfff; - writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 &= ~BIT(13); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); /* * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and @@ -472,9 +492,8 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) * Activate this signal for 1 clock cycle to sample new calibration * values. */ - rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); - val = rdata | 0x2000; - writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(13); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); usleep_range(150, 200); /* set TX Voltage Level and TX Deemphasis to 0 */ @@ -482,8 +501,10 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) /* re-enable decap */ writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2); writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2); - writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1); - writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(3); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(4); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); writel(0, tcphy->base + TX_ANA_CTRL_REG_5); @@ -494,8 +515,10 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4); /* re-enables Bandgap reference for LDO */ - writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1); - writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(7); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(8); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); /* * re-enables the transmitter pre-driver, driver data selection MUX, @@ -505,27 +528,26 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2); /* - * BIT 12: Controls auxda_polarity, which selects the polarity of the - * xcvr: - * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull - * down aux_m) - * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down - * aux_p) + * Do some magic undocumented stuff, some of which appears to + * undo the "re-enables Bandgap reference for LDO" above. */ - val = 0xa078; - if (!tcphy->flip) - val |= BIT(12); - writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(15); + tx_ana_ctrl_reg_1 &= ~BIT(8); + tx_ana_ctrl_reg_1 &= ~BIT(7); + tx_ana_ctrl_reg_1 |= BIT(6); + tx_ana_ctrl_reg_1 |= BIT(5); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); writel(0, tcphy->base + TX_ANA_CTRL_REG_3); writel(0, tcphy->base + TX_ANA_CTRL_REG_4); writel(0, tcphy->base + TX_ANA_CTRL_REG_5); /* - * Controls low_power_swing_en, set the voltage swing of the driver - * to 400mv. The values below are peak to peak (differential) values. + * Controls low_power_swing_en, don't set the voltage swing of the + * driver to 400mv. The values below are peak to peak (differential) + * values. */ - writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL); + writel(0, tcphy->base + TXDA_COEFF_CALC_CTRL); writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA); /* Controls tx_high_z_tm_en */ @@ -555,6 +577,7 @@ static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode) reset_control_deassert(tcphy->tcphy_rst); property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip); + tcphy_dp_aux_set_flip(tcphy); tcphy_cfg_24m(tcphy); @@ -685,8 +708,11 @@ static int rockchip_usb3_phy_power_on(struct phy *phy) if (tcphy->mode == new_mode) goto unlock_ret; - if (tcphy->mode == MODE_DISCONNECT) - tcphy_phy_init(tcphy, new_mode); + if (tcphy->mode == MODE_DISCONNECT) { + ret = tcphy_phy_init(tcphy, new_mode); + if (ret) + goto unlock_ret; + } /* wait TCPHY for pipe ready */ for (timeout = 0; timeout < 100; timeout++) { @@ -760,10 +786,12 @@ static int rockchip_dp_phy_power_on(struct phy *phy) */ if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) { tcphy_phy_deinit(tcphy); - tcphy_phy_init(tcphy, new_mode); + ret = tcphy_phy_init(tcphy, new_mode); } else if (tcphy->mode == MODE_DISCONNECT) { - tcphy_phy_init(tcphy, new_mode); + ret = tcphy_phy_init(tcphy, new_mode); } + if (ret) + goto unlock_ret; ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, val, val & DP_MODE_A2, 1000, diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index 3cbcb2537657..4307bf0013e1 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -454,6 +454,8 @@ tegra_xusb_find_port_node(struct tegra_xusb_padctl *padctl, const char *type, char *name; name = kasprintf(GFP_KERNEL, "%s-%u", type, index); + if (!name) + return ERR_PTR(-ENOMEM); np = of_find_node_by_name(np, name); kfree(name); } diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 5e056064259c..18c923a4c16e 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1832,6 +1832,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0xfff0, 0x0100), /* DATECS FP-2000 */ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ }, + { USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */ + .driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */ + }, { USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */ .driver_info = CLEAR_HALT_CONDITIONS, diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 68b54bd88d1e..883549ee946c 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -960,10 +960,12 @@ int usb_get_bos_descriptor(struct usb_device *dev) for (i = 0; i < num; i++) { buffer += length; cap = (struct usb_dev_cap_header *)buffer; - length = cap->bLength; - if (total_len < length) + if (total_len < sizeof(*cap) || total_len < cap->bLength) { + dev->bos->desc->bNumDeviceCaps = i; break; + } + length = cap->bLength; total_len -= length; if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) { diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 4664e543cf2f..e9326f31db8d 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1576,11 +1576,7 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb totlen += isopkt[u].length; } u *= sizeof(struct usb_iso_packet_descriptor); - if (totlen <= uurb->buffer_length) - uurb->buffer_length = totlen; - else - WARN_ONCE(1, "uurb->buffer_length is too short %d vs %d", - totlen, uurb->buffer_length); + uurb->buffer_length = totlen; break; default: diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b5c733613823..e9ce6bb0b22d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2710,13 +2710,16 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, if (!(portstatus & USB_PORT_STAT_CONNECTION)) return -ENOTCONN; - /* bomb out completely if the connection bounced. A USB 3.0 - * connection may bounce if multiple warm resets were issued, + /* Retry if connect change is set but status is still connected. + * A USB 3.0 connection may bounce if multiple warm resets were issued, * but the device may have successfully re-connected. Ignore it. */ if (!hub_is_superspeed(hub->hdev) && - (portchange & USB_PORT_STAT_C_CONNECTION)) - return -ENOTCONN; + (portchange & USB_PORT_STAT_C_CONNECTION)) { + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_CONNECTION); + return -EAGAIN; + } if (!(portstatus & USB_PORT_STAT_ENABLE)) return -EBUSY; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 82806e311202..a6aaf2f193a4 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -221,6 +221,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Corsair Strafe RGB */ { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT }, + /* MIDI keyboard WORLDE MINI */ + { USB_DEVICE(0x1c75, 0x0204), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Acer C120 LED Projector */ { USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM }, diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index da9158f171cb..a2336deb5e36 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -420,14 +420,25 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) GFP_NOWAIT); if (!command) { spin_unlock_irqrestore(&xhci->lock, flags); - xhci_free_command(xhci, cmd); - return -ENOMEM; + ret = -ENOMEM; + goto cmd_cleanup; + } + + ret = xhci_queue_stop_endpoint(xhci, command, slot_id, + i, suspend); + if (ret) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_free_command(xhci, command); + goto cmd_cleanup; } - xhci_queue_stop_endpoint(xhci, command, slot_id, i, - suspend); } } - xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend); + ret = xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend); + if (ret) { + spin_unlock_irqrestore(&xhci->lock, flags); + goto cmd_cleanup; + } + xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); @@ -439,6 +450,8 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n"); ret = -ETIME; } + +cmd_cleanup: xhci_free_command(xhci, cmd); return ret; } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index a9443651ce0f..82c746e2d85c 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1309,6 +1309,7 @@ static void xhci_complete_del_and_free_cmd(struct xhci_command *cmd, u32 status) void xhci_cleanup_command_queue(struct xhci_hcd *xhci) { struct xhci_command *cur_cmd, *tmp_cmd; + xhci->current_cmd = NULL; list_for_each_entry_safe(cur_cmd, tmp_cmd, &xhci->cmd_list, cmd_list) xhci_complete_del_and_free_cmd(cur_cmd, COMP_COMMAND_ABORTED); } @@ -2579,15 +2580,21 @@ static int handle_tx_event(struct xhci_hcd *xhci, (struct xhci_generic_trb *) ep_trb); /* - * No-op TRB should not trigger interrupts. - * If ep_trb is a no-op TRB, it means the - * corresponding TD has been cancelled. Just ignore - * the TD. + * No-op TRB could trigger interrupts in a case where + * a URB was killed and a STALL_ERROR happens right + * after the endpoint ring stopped. Reset the halted + * endpoint. Otherwise, the endpoint remains stalled + * indefinitely. */ if (trb_is_noop(ep_trb)) { - xhci_dbg(xhci, - "ep_trb is a no-op TRB. Skip it for slot %u ep %u\n", - slot_id, ep_index); + if (trb_comp_code == COMP_STALL_ERROR || + xhci_requires_manual_halt_cleanup(xhci, ep_ctx, + trb_comp_code)) + xhci_cleanup_halted_endpoint(xhci, slot_id, + ep_index, + ep_ring->stream_id, + td, ep_trb, + EP_HARD_RESET); goto cleanup; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index ee198ea47f49..51535ba2bcd4 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4805,7 +4805,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) */ hcd->has_tt = 1; } else { - if (xhci->sbrn == 0x31) { + /* Some 3.1 hosts return sbrn 0x30, can't rely on sbrn alone */ + if (xhci->sbrn == 0x31 || xhci->usb3_rhub.min_rev >= 1) { xhci_info(xhci, "Host supports USB 3.1 Enhanced SuperSpeed\n"); hcd->speed = HCD_USB31; hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS; diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 029692053dd3..ff5a1a8989d5 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -906,7 +906,7 @@ b_host: */ if (int_usb & MUSB_INTR_RESET) { handled = IRQ_HANDLED; - if (devctl & MUSB_DEVCTL_HM) { + if (is_host_active(musb)) { /* * When BABBLE happens what we can depends on which * platform MUSB is running, because some platforms @@ -916,9 +916,7 @@ b_host: * drop the session. */ dev_err(musb->controller, "Babble\n"); - - if (is_host_active(musb)) - musb_recover_from_babble(musb); + musb_recover_from_babble(musb); } else { musb_dbg(musb, "BUS RESET as %s", usb_otg_state_string(musb->xceiv->otg->state)); @@ -1861,22 +1859,22 @@ static void musb_pm_runtime_check_session(struct musb *musb) MUSB_DEVCTL_HR; switch (devctl & ~s) { case MUSB_QUIRK_B_INVALID_VBUS_91: - if (musb->quirk_retries--) { + if (musb->quirk_retries && !musb->flush_irq_work) { musb_dbg(musb, "Poll devctl on invalid vbus, assume no session"); schedule_delayed_work(&musb->irq_work, msecs_to_jiffies(1000)); - + musb->quirk_retries--; return; } /* fall through */ case MUSB_QUIRK_A_DISCONNECT_19: - if (musb->quirk_retries--) { + if (musb->quirk_retries && !musb->flush_irq_work) { musb_dbg(musb, "Poll devctl on possible host mode disconnect"); schedule_delayed_work(&musb->irq_work, msecs_to_jiffies(1000)); - + musb->quirk_retries--; return; } if (!musb->session) @@ -2681,8 +2679,15 @@ static int musb_suspend(struct device *dev) musb_platform_disable(musb); musb_disable_interrupts(musb); + + musb->flush_irq_work = true; + while (flush_delayed_work(&musb->irq_work)) + ; + musb->flush_irq_work = false; + if (!(musb->io.quirks & MUSB_PRESERVE_SESSION)) musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + WARN_ON(!list_empty(&musb->pending_list)); spin_lock_irqsave(&musb->lock, flags); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index c748f4ac1154..20f4614178d9 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -428,6 +428,8 @@ struct musb { unsigned test_mode:1; unsigned softconnect:1; + unsigned flush_irq_work:1; + u8 address; u8 test_mode_nr; u16 ackpend; /* ep0 */ diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index ba255280a624..1ec0a4947b6b 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -26,15 +26,28 @@ #define MUSB_DMA_NUM_CHANNELS 15 +#define DA8XX_USB_MODE 0x10 +#define DA8XX_USB_AUTOREQ 0x14 +#define DA8XX_USB_TEARDOWN 0x1c + +#define DA8XX_DMA_NUM_CHANNELS 4 + struct cppi41_dma_controller { struct dma_controller controller; - struct cppi41_dma_channel rx_channel[MUSB_DMA_NUM_CHANNELS]; - struct cppi41_dma_channel tx_channel[MUSB_DMA_NUM_CHANNELS]; + struct cppi41_dma_channel *rx_channel; + struct cppi41_dma_channel *tx_channel; struct hrtimer early_tx; struct list_head early_tx_list; u32 rx_mode; u32 tx_mode; u32 auto_req; + + u32 tdown_reg; + u32 autoreq_reg; + + void (*set_dma_mode)(struct cppi41_dma_channel *cppi41_channel, + unsigned int mode); + u8 num_channels; }; static void save_rx_toggle(struct cppi41_dma_channel *cppi41_channel) @@ -349,6 +362,32 @@ static void cppi41_set_dma_mode(struct cppi41_dma_channel *cppi41_channel, } } +static void da8xx_set_dma_mode(struct cppi41_dma_channel *cppi41_channel, + unsigned int mode) +{ + struct cppi41_dma_controller *controller = cppi41_channel->controller; + struct musb *musb = controller->controller.musb; + unsigned int shift; + u32 port; + u32 new_mode; + u32 old_mode; + + old_mode = controller->tx_mode; + port = cppi41_channel->port_num; + + shift = (port - 1) * 4; + if (!cppi41_channel->is_tx) + shift += 16; + new_mode = old_mode & ~(3 << shift); + new_mode |= mode << shift; + + if (new_mode == old_mode) + return; + controller->tx_mode = new_mode; + musb_writel(musb->ctrl_base, DA8XX_USB_MODE, new_mode); +} + + static void cppi41_set_autoreq_mode(struct cppi41_dma_channel *cppi41_channel, unsigned mode) { @@ -364,8 +403,8 @@ static void cppi41_set_autoreq_mode(struct cppi41_dma_channel *cppi41_channel, if (new_mode == old_mode) return; controller->auto_req = new_mode; - musb_writel(controller->controller.musb->ctrl_base, USB_CTRL_AUTOREQ, - new_mode); + musb_writel(controller->controller.musb->ctrl_base, + controller->autoreq_reg, new_mode); } static bool cppi41_configure_channel(struct dma_channel *channel, @@ -373,6 +412,7 @@ static bool cppi41_configure_channel(struct dma_channel *channel, dma_addr_t dma_addr, u32 len) { struct cppi41_dma_channel *cppi41_channel = channel->private_data; + struct cppi41_dma_controller *controller = cppi41_channel->controller; struct dma_chan *dc = cppi41_channel->dc; struct dma_async_tx_descriptor *dma_desc; enum dma_transfer_direction direction; @@ -398,7 +438,7 @@ static bool cppi41_configure_channel(struct dma_channel *channel, musb_writel(musb->ctrl_base, RNDIS_REG(cppi41_channel->port_num), len); /* gen rndis */ - cppi41_set_dma_mode(cppi41_channel, + controller->set_dma_mode(cppi41_channel, EP_MODE_DMA_GEN_RNDIS); /* auto req */ @@ -407,14 +447,15 @@ static bool cppi41_configure_channel(struct dma_channel *channel, } else { musb_writel(musb->ctrl_base, RNDIS_REG(cppi41_channel->port_num), 0); - cppi41_set_dma_mode(cppi41_channel, + controller->set_dma_mode(cppi41_channel, EP_MODE_DMA_TRANSPARENT); cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREQ_NONE); } } else { /* fallback mode */ - cppi41_set_dma_mode(cppi41_channel, EP_MODE_DMA_TRANSPARENT); + controller->set_dma_mode(cppi41_channel, + EP_MODE_DMA_TRANSPARENT); cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREQ_NONE); len = min_t(u32, packet_sz, len); } @@ -445,7 +486,7 @@ static struct dma_channel *cppi41_dma_channel_allocate(struct dma_controller *c, struct cppi41_dma_channel *cppi41_channel = NULL; u8 ch_num = hw_ep->epnum - 1; - if (ch_num >= MUSB_DMA_NUM_CHANNELS) + if (ch_num >= controller->num_channels) return NULL; if (is_tx) @@ -581,12 +622,13 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel) do { if (is_tx) - musb_writel(musb->ctrl_base, USB_TDOWN, tdbit); + musb_writel(musb->ctrl_base, controller->tdown_reg, + tdbit); ret = dmaengine_terminate_all(cppi41_channel->dc); } while (ret == -EAGAIN); if (is_tx) { - musb_writel(musb->ctrl_base, USB_TDOWN, tdbit); + musb_writel(musb->ctrl_base, controller->tdown_reg, tdbit); csr = musb_readw(epio, MUSB_TXCSR); if (csr & MUSB_TXCSR_TXPKTRDY) { @@ -604,7 +646,7 @@ static void cppi41_release_all_dma_chans(struct cppi41_dma_controller *ctrl) struct dma_chan *dc; int i; - for (i = 0; i < MUSB_DMA_NUM_CHANNELS; i++) { + for (i = 0; i < ctrl->num_channels; i++) { dc = ctrl->tx_channel[i].dc; if (dc) dma_release_channel(dc); @@ -656,7 +698,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) goto err; ret = -EINVAL; - if (port > MUSB_DMA_NUM_CHANNELS || !port) + if (port > controller->num_channels || !port) goto err; if (is_tx) cppi41_channel = &controller->tx_channel[port - 1]; @@ -697,6 +739,8 @@ void cppi41_dma_controller_destroy(struct dma_controller *c) hrtimer_cancel(&controller->early_tx); cppi41_dma_controller_stop(controller); + kfree(controller->rx_channel); + kfree(controller->tx_channel); kfree(controller); } EXPORT_SYMBOL_GPL(cppi41_dma_controller_destroy); @@ -705,6 +749,7 @@ struct dma_controller * cppi41_dma_controller_create(struct musb *musb, void __iomem *base) { struct cppi41_dma_controller *controller; + int channel_size; int ret = 0; if (!musb->controller->parent->of_node) { @@ -727,12 +772,37 @@ cppi41_dma_controller_create(struct musb *musb, void __iomem *base) controller->controller.is_compatible = cppi41_is_compatible; controller->controller.musb = musb; + if (musb->io.quirks & MUSB_DA8XX) { + controller->tdown_reg = DA8XX_USB_TEARDOWN; + controller->autoreq_reg = DA8XX_USB_AUTOREQ; + controller->set_dma_mode = da8xx_set_dma_mode; + controller->num_channels = DA8XX_DMA_NUM_CHANNELS; + } else { + controller->tdown_reg = USB_TDOWN; + controller->autoreq_reg = USB_CTRL_AUTOREQ; + controller->set_dma_mode = cppi41_set_dma_mode; + controller->num_channels = MUSB_DMA_NUM_CHANNELS; + } + + channel_size = controller->num_channels * + sizeof(struct cppi41_dma_channel); + controller->rx_channel = kzalloc(channel_size, GFP_KERNEL); + if (!controller->rx_channel) + goto rx_channel_alloc_fail; + controller->tx_channel = kzalloc(channel_size, GFP_KERNEL); + if (!controller->tx_channel) + goto tx_channel_alloc_fail; + ret = cppi41_dma_controller_start(controller); if (ret) goto plat_get_fail; return &controller->controller; plat_get_fail: + kfree(controller->tx_channel); +tx_channel_alloc_fail: + kfree(controller->rx_channel); +rx_channel_alloc_fail: kfree(controller); kzalloc_fail: if (ret == -EPROBE_DEFER) diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index c9a09b5bb6e5..dc353e24d53c 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -297,6 +297,8 @@ static int sunxi_musb_exit(struct musb *musb) if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) sunxi_sram_release(musb->controller->parent); + devm_usb_put_phy(glue->dev, glue->xceiv); + return 0; } diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index cc84da8dbb84..14511d6a7d44 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -45,6 +45,7 @@ struct metrousb_private { static const struct usb_device_id id_table[] = { { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) }, { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) }, + { USB_DEVICE_INTERFACE_CLASS(0x0c2e, 0x0730, 0xff) }, /* MS7820 */ { }, /* Terminating entry. */ }; MODULE_DEVICE_TABLE(usb, id_table); |