Staging: delete westbridge code

It's been stagnant for a while with out much forward progress for a
variety of different reasons.  So remove it for now.  It can be reverted
at any time if development picks back up again.

Acked-by: David Cross <odc@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

67 files changed, 0 insertions, 42055 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 6780df0ba77f..06c9081d596d 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -124,8 +124,6 @@ source "drivers/staging/tidspbridge/Kconfig"
 
 source "drivers/staging/quickstart/Kconfig"
 
-source "drivers/staging/westbridge/Kconfig"
-
 source "drivers/staging/sbe-2t3e3/Kconfig"
 
 source "drivers/staging/ath6kl/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 36a8b84259bd..f3c5e33bb263 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -53,7 +53,6 @@ obj-$(CONFIG_EASYCAP)		+= easycap/
 obj-$(CONFIG_SOLO6X10)		+= solo6x10/
 obj-$(CONFIG_TIDSPBRIDGE)	+= tidspbridge/
 obj-$(CONFIG_ACPI_QUICKSTART)	+= quickstart/
-obj-$(CONFIG_WESTBRIDGE_ASTORIA)	+= westbridge/astoria/
 obj-$(CONFIG_SBE_2T3E3)		+= sbe-2t3e3/
 obj-$(CONFIG_ATH6K_LEGACY)	+= ath6kl/
 obj-$(CONFIG_USB_ENESTORAGE)	+= keucr/
diff --git a/drivers/staging/westbridge/Kconfig b/drivers/staging/westbridge/Kconfig
deleted file mode 100644
index 2b1c2ae557b6..000000000000
--- a/drivers/staging/westbridge/Kconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# West Bridge configuration
-#
-
-menuconfig WESTBRIDGE
-	tristate "West Bridge support"
-	depends on WESTBRIDGE_HAL_SELECTED
-	help
-	  This selects West Bridge Peripheral controller support.
-
-	  If you want West Bridge support, you should say Y here.
-
-menuconfig WESTBRIDGE_ASTORIA
-	bool "West Bridge Astoria support"
-	depends on WESTBRIDGE != n && WESTBRIDGE_HAL_SELECTED
-	help
-		This option enables support for West Bridge Astoria
-
-if WESTBRIDGE_ASTORIA
-source "drivers/staging/westbridge/astoria/Kconfig"
-endif #WESTBRIDGE_ASTORIA
-
-config	WESTBRIDGE_HAL_SELECTED
-	boolean
-
-choice
-	prompt "West Bridge HAL"
-	help
-	   West Bridge HAL/processor interface to be used
-
-#
-# HAL Layers
-#
-
-config MACH_OMAP3_WESTBRIDGE_AST_PNAND_HAL
-	bool "WESTBRIDGE OMAP3430 Astoria PNAND HAL"
-	depends on ARCH_OMAP3
-	select WESTBRIDGE_HAL_SELECTED
-	help
-	   Include the OMAP3430 HAL for PNAND interface
-
-config MACH_NO_WESTBRIDGE
-	bool "no West Bridge HAL selected"
-	help
-	   Do not include any HAL layer(de-activates West Bridge option)
-endchoice
-
-config WESTBRIDGE_DEBUG
-	bool "West Bridge debugging"
-	depends on WESTBRIDGE != n
-	help
-	  This is an option for use by developers; most people should
-	  say N here.  This enables WESTBRIDGE core and driver debugging.
diff --git a/drivers/staging/westbridge/TODO b/drivers/staging/westbridge/TODO
deleted file mode 100644
index 6ca80581bbe2..000000000000
--- a/drivers/staging/westbridge/TODO
+++ /dev/null
@@ -1,7 +0,0 @@
-TODO:
-- checkpatch.pl fixes
-- determine where to put the hal and common api code
-- modify the driver directory structure in an intuitive way
-
-Please send any patches to Greg Kroah-Hartman <gregkh@suse.de>
-and David Cross <david.cross@cypress.com>.
diff --git a/drivers/staging/westbridge/astoria/Kconfig b/drivers/staging/westbridge/astoria/Kconfig
deleted file mode 100644
index 1ce388acbfeb..000000000000
--- a/drivers/staging/westbridge/astoria/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# West Bridge configuration
-#
-source "drivers/staging/westbridge/astoria/device/Kconfig"
-
-source "drivers/staging/westbridge/astoria/block/Kconfig"
-
-source "drivers/staging/westbridge/astoria/gadget/Kconfig"
-
diff --git a/drivers/staging/westbridge/astoria/Makefile b/drivers/staging/westbridge/astoria/Makefile
deleted file mode 100644
index 907bdb25804b..000000000000
--- a/drivers/staging/westbridge/astoria/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the kernel westbridge device drivers.
-#
-
-ifneq ($(CONFIG_WESTBRIDGE_DEBUG),y)
-	EXTRA_CFLAGS		+= -WESTBRIDGE_NDEBUG
-endif
-
-obj-$(CONFIG_WESTBRIDGE)		+= device/
-obj-$(CONFIG_WESTBRIDGE)		+= block/
-obj-$(CONFIG_WESTBRIDGE)		+= gadget/
\ No newline at end of file
diff --git a/drivers/staging/westbridge/astoria/api/Makefile b/drivers/staging/westbridge/astoria/api/Makefile
deleted file mode 100644
index 1c94bc7bb310..000000000000
--- a/drivers/staging/westbridge/astoria/api/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Makefile for the kernel westbridge core.
-#
-
-ifeq ($(CONFIG_WESTBRIDGE_DEBUG),n)
-	EXTRA_CFLAGS		+= -NDEBUG
-endif
-
-obj-$(CONFIG_WESTBRIDGE_DEVICE_DRIVER)		+= cyasapi.o
-cyasapi-y			:= src/cyasdma.o src/cyasintr.o src/cyaslep2pep.o \
-				   src/cyaslowlevel.o src/cyasmisc.o src/cyasmtp.o \
-				   src/cyasstorage.o src/cyasusb.o
-
-
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasdma.c b/drivers/staging/westbridge/astoria/api/src/cyasdma.c
deleted file mode 100644
index c461d4f60bfb..000000000000
--- a/drivers/staging/westbridge/astoria/api/src/cyasdma.c
+++ /dev/null
@@ -1,1107 +0,0 @@
-/* Cypress West Bridge API source file (cyasdma.c)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#include "../../include/linux/westbridge/cyashal.h"
-#include "../../include/linux/westbridge/cyasdma.h"
-#include "../../include/linux/westbridge/cyaslowlevel.h"
-#include "../../include/linux/westbridge/cyaserr.h"
-#include "../../include/linux/westbridge/cyasregs.h"
-
-/*
- * Add the DMA queue entry to the free list to be re-used later
- */
-static void
-cy_as_dma_add_request_to_free_queue(cy_as_device *dev_p,
-	cy_as_dma_queue_entry *req_p)
-{
-	uint32_t imask;
-	imask = cy_as_hal_disable_interrupts();
-
-	req_p->next_p = dev_p->dma_freelist_p;
-	dev_p->dma_freelist_p = req_p;
-
-	cy_as_hal_enable_interrupts(imask);
-}
-
-/*
- * Get a DMA queue entry from the free list.
- */
-static cy_as_dma_queue_entry *
-cy_as_dma_get_dma_queue_entry(cy_as_device *dev_p)
-{
-	cy_as_dma_queue_entry *req_p;
-	uint32_t imask;
-
-	cy_as_hal_assert(dev_p->dma_freelist_p != 0);
-
-	imask = cy_as_hal_disable_interrupts();
-	req_p = dev_p->dma_freelist_p;
-	dev_p->dma_freelist_p = req_p->next_p;
-	cy_as_hal_enable_interrupts(imask);
-
-	return req_p;
-}
-
-/*
- * Set the maximum size that the West Bridge hardware
- * can handle in a single DMA operation.  This size
- * may change for the P <-> U endpoints as a function
- * of the endpoint type and whether we are running
- * at full speed or high speed.
- */
-cy_as_return_status_t
-cy_as_dma_set_max_dma_size(cy_as_device *dev_p,
-		cy_as_end_point_number_t ep, uint32_t size)
-{
-	/* In MTP mode, EP2 is allowed to have all max sizes. */
-	if ((!dev_p->is_mtp_firmware) || (ep != 0x02)) {
-		if (size < 64 || size > 1024)
-			return CY_AS_ERROR_INVALID_SIZE;
-	}
-
-	CY_AS_NUM_EP(dev_p, ep)->maxhwdata = (uint16_t)size;
-	return CY_AS_ERROR_SUCCESS;
-}
-
-/*
- * The callback for requests sent to West Bridge
- * to relay endpoint data.  Endpoint data for EP0
- * and EP1 are sent using mailbox requests.  This
- * is the callback that is called when a response
- * to a mailbox request to send data is received.
- */
-static void
-cy_as_dma_request_callback(
-	cy_as_device *dev_p,
-	uint8_t context,
-	cy_as_ll_request_response *req_p,
-	cy_as_ll_request_response *resp_p,
-	cy_as_return_status_t ret)
-{
-	uint16_t v;
-	uint16_t datacnt;
-	cy_as_end_point_number_t ep;
-
-	(void)context;
-
-	cy_as_log_debug_message(5, "cy_as_dma_request_callback called");
-
-	/*
-	 * extract the return code from the firmware
-	 */
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		if (cy_as_ll_request_response__get_code(resp_p) !=
-		CY_RESP_SUCCESS_FAILURE)
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-		else
-			ret = cy_as_ll_request_response__get_word(resp_p, 0);
-	}
-
-	/*
-	 * extract the endpoint number and the transferred byte count
-	 * from the request.
-	 */
-	v = cy_as_ll_request_response__get_word(req_p, 0);
-	ep = (cy_as_end_point_number_t)((v >> 13) & 0x01);
-
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		/*
-		 * if the firmware returns success,
-		 * all of the data requested was
-		 * transferred.  there are no partial
-		 * transfers.
-		 */
-		datacnt = v & 0x3FF;
-	} else {
-		/*
-		 * if the firmware returned an error, no data was transferred.
-		 */
-		datacnt = 0;
-	}
-
-	/*
-	 * queue the request and response data structures for use with the
-	 * next EP0 or EP1 request.
-	 */
-	if (ep == 0) {
-		dev_p->usb_ep0_dma_req = req_p;
-		dev_p->usb_ep0_dma_resp = resp_p;
-	} else {
-		dev_p->usb_ep1_dma_req = req_p;
-		dev_p->usb_ep1_dma_resp = resp_p;
-	}
-
-	/*
-	 * call the DMA complete function so we can
-	 * signal that this portion of the transfer
-	 * has completed.  if the low level request
-	 * was canceled, we do not need to signal
-	 * the completed function as the only way a
-	 * cancel can happen is via the DMA cancel
-	 * function.
-	 */
-	if (ret != CY_AS_ERROR_CANCELED)
-		cy_as_dma_completed_callback(dev_p->tag, ep, datacnt, ret);
-}
-
-/*
- * Set the DRQ mask register for the given endpoint number.  If state is
- * CyTrue, the DRQ interrupt for the given endpoint is enabled, otherwise
- * it is disabled.
- */
-static void
-cy_as_dma_set_drq(cy_as_device *dev_p,
-		cy_as_end_point_number_t ep, cy_bool state)
-{
-	uint16_t mask;
-	uint16_t v;
-	uint32_t intval;
-
-	/*
-	 * there are not DRQ register bits for EP0 and EP1
-	 */
-	if (ep == 0 || ep == 1)
-		return;
-
-	/*
-	 * disable interrupts while we do this to be sure the state of the
-	 * DRQ mask register is always well defined.
-	 */
-	intval = cy_as_hal_disable_interrupts();
-
-	/*
-	 * set the DRQ bit to the given state for the ep given
-	 */
-	mask = (1 << ep);
-	v = cy_as_hal_read_register(dev_p->tag, CY_AS_MEM_P0_DRQ_MASK);
-
-	if (state)
-		v |= mask;
-	else
-		v &= ~mask;
-
-	cy_as_hal_write_register(dev_p->tag, CY_AS_MEM_P0_DRQ_MASK, v);
-	cy_as_hal_enable_interrupts(intval);
-}
-
-/*
-* Send the next DMA request for the endpoint given
-*/
-static void
-cy_as_dma_send_next_dma_request(cy_as_device *dev_p, cy_as_dma_end_point *ep_p)
-{
-	uint32_t datacnt;
-	void *buf_p;
-	cy_as_dma_queue_entry *dma_p;
-
-	cy_as_log_debug_message(6, "cy_as_dma_send_next_dma_request called");
-
-	/* If the queue is empty, nothing to do */
-	dma_p = ep_p->queue_p;
-	if (dma_p == 0) {
-		/*
-		 * there are no pending DMA requests
-		 * for this endpoint.  disable the DRQ
-		 * mask bits to insure no interrupts
-		 * will be triggered by this endpoint
-		 * until someone is interested in the data.
-		 */
-		cy_as_dma_set_drq(dev_p, ep_p->ep, cy_false);
-		return;
-	}
-
-	cy_as_dma_end_point_set_running(ep_p);
-
-	/*
-	 * get the number of words that still
-	 * need to be xferred in this request.
-	 */
-	datacnt = dma_p->size - dma_p->offset;
-	cy_as_hal_assert(datacnt >= 0);
-
-	/*
-	 * the HAL layer should never limit the size
-	 * of the transfer to something less than the
-	 * maxhwdata otherwise, the data will be sent
-	 * in packets that are not correct in size.
-	 */
-	cy_as_hal_assert(ep_p->maxhaldata == CY_AS_DMA_MAX_SIZE_HW_SIZE
-			|| ep_p->maxhaldata >= ep_p->maxhwdata);
-
-	/*
-	 * update the number of words that need to be xferred yet
-	 * based on the limits of the HAL layer.
-	 */
-	if (ep_p->maxhaldata == CY_AS_DMA_MAX_SIZE_HW_SIZE) {
-		if (datacnt > ep_p->maxhwdata)
-			datacnt = ep_p->maxhwdata;
-	} else {
-		if (datacnt > ep_p->maxhaldata)
-			datacnt = ep_p->maxhaldata;
-	}
-
-	/*
-	 * find a pointer to the data that needs to be transferred
-	 */
-	buf_p = (((char *)dma_p->buf_p) + dma_p->offset);
-
-	/*
-	 * mark a request in transit
-	 */
-	cy_as_dma_end_point_set_in_transit(ep_p);
-
-	if (ep_p->ep == 0 || ep_p->ep == 1) {
-		/*
-		 * if this is a WRITE request on EP0 and EP1
-		 * we write the data via an EP_DATA request
-		 * to west bridge via the mailbox registers.
-		 * if this is a READ request, we do nothing
-		 * and the data will arrive via an EP_DATA
-		 * request from west bridge.  in the request
-		 * handler for the USB context we will pass
-		 * the data back into the DMA module.
-		 */
-		if (dma_p->readreq == cy_false) {
-			uint16_t v;
-			uint16_t len;
-			cy_as_ll_request_response *resp_p;
-			cy_as_ll_request_response *req_p;
-			cy_as_return_status_t ret;
-
-			len = (uint16_t)(datacnt / 2);
-			if (datacnt % 2)
-				len++;
-
-			len++;
-
-			if (ep_p->ep == 0) {
-				req_p = dev_p->usb_ep0_dma_req;
-				resp_p = dev_p->usb_ep0_dma_resp;
-				dev_p->usb_ep0_dma_req = 0;
-				dev_p->usb_ep0_dma_resp = 0;
-			} else {
-				req_p = dev_p->usb_ep1_dma_req;
-				resp_p = dev_p->usb_ep1_dma_resp;
-				dev_p->usb_ep1_dma_req = 0;
-				dev_p->usb_ep1_dma_resp = 0;
-			}
-
-			cy_as_hal_assert(req_p != 0);
-			cy_as_hal_assert(resp_p != 0);
-			cy_as_hal_assert(len <= 64);
-
-			cy_as_ll_init_request(req_p, CY_RQT_USB_EP_DATA,
-				CY_RQT_USB_RQT_CONTEXT, len);
-
-			v = (uint16_t)(datacnt | (ep_p->ep << 13) | (1 << 14));
-			if (dma_p->offset == 0)
-				v |= (1 << 12);/* Set the first packet bit */
-			if (dma_p->offset + datacnt == dma_p->size)
-				v |= (1 << 11);/* Set the last packet bit */
-
-			cy_as_ll_request_response__set_word(req_p, 0, v);
-			cy_as_ll_request_response__pack(req_p,
-					1, datacnt, buf_p);
-
-			cy_as_ll_init_response(resp_p, 1);
-
-			ret = cy_as_ll_send_request(dev_p, req_p, resp_p,
-				cy_false, cy_as_dma_request_callback);
-			if (ret == CY_AS_ERROR_SUCCESS)
-				cy_as_log_debug_message(5,
-				"+++ send EP 0/1 data via mailbox registers");
-			else
-				cy_as_log_debug_message(5,
-				"+++ error sending EP 0/1 data via mailbox "
-				"registers - CY_AS_ERROR_TIMEOUT");
-
-			if (ret != CY_AS_ERROR_SUCCESS)
-				cy_as_dma_completed_callback(dev_p->tag,
-					ep_p->ep, 0, ret);
-		}
-	} else {
-		/*
-		 * this is a DMA request on an endpoint that is accessible
-		 * via the P port.  ask the HAL DMA capabilities to
-		 * perform this.  the amount of data sent is limited by the
-		 * HAL max size as well as what we need to send.  if the
-		 * ep_p->maxhaldata is set to a value larger than the
-		 * endpoint buffer size, then we will pass more than a
-		 * single buffer worth of data to the HAL layer and expect
-		 * the HAL layer to divide the data into packets.  the last
-		 * parameter here (ep_p->maxhwdata) gives the packet size for
-		 * the data so the HAL layer knows what the packet size should
-		 * be.
-		 */
-		if (cy_as_dma_end_point_is_direction_in(ep_p))
-			cy_as_hal_dma_setup_write(dev_p->tag,
-				ep_p->ep, buf_p, datacnt, ep_p->maxhwdata);
-		else
-			cy_as_hal_dma_setup_read(dev_p->tag,
-				ep_p->ep, buf_p, datacnt, ep_p->maxhwdata);
-
-		/*
-		 * the DRQ interrupt for this endpoint should be enabled
-		 * so that the data transfer progresses at interrupt time.
-		 */
-		cy_as_dma_set_drq(dev_p, ep_p->ep, cy_true);
-	}
-}
-
-/*
- * This function is called when the HAL layer has
- * completed the last requested DMA operation.
- * This function sends/receives the next batch of
- * data associated with the current DMA request,
- * or it is is complete, moves to the next DMA request.
- */
-void
-cy_as_dma_completed_callback(cy_as_hal_device_tag tag,
-	cy_as_end_point_number_t ep, uint32_t cnt, cy_as_return_status_t status)
-{
-	uint32_t mask;
-	cy_as_dma_queue_entry *req_p;
-	cy_as_dma_end_point *ep_p;
-	cy_as_device *dev_p = cy_as_device_find_from_tag(tag);
-
-	/* Make sure the HAL layer gave us good parameters */
-	cy_as_hal_assert(dev_p != 0);
-	cy_as_hal_assert(dev_p->sig == CY_AS_DEVICE_HANDLE_SIGNATURE);
-	cy_as_hal_assert(ep < 16);
-
-
-	/* Get the endpoint ptr */
-	ep_p = CY_AS_NUM_EP(dev_p, ep);
-	cy_as_hal_assert(ep_p->queue_p != 0);
-
-	/* Get a pointer to the current entry in the queue */
-	mask = cy_as_hal_disable_interrupts();
-	req_p = ep_p->queue_p;
-
-	/* Update the offset to reflect the data actually received or sent */
-	req_p->offset += cnt;
-
-	/*
-	 * if we are still sending/receiving the current packet,
-	 * send/receive the next chunk basically we keep going
-	 * if we have not sent/received enough data, and we are
-	 * not doing a packet operation, and the last packet
-	 * sent or received was a full sized packet.  in other
-	 * words, when we are NOT doing a packet operation, a
-	 * less than full size packet (a short packet) will
-	 * terminate the operation.
-	 *
-	 * note: if this is EP1 request and the request has
-	 * timed out, it means the buffer is not free.
-	 * we have to resend the data.
-	 *
-	 * note: for the MTP data transfers, the DMA transfer
-	 * for the next packet can only be started asynchronously,
-	 * after a firmware event notifies that the device is ready.
-	 */
-	if (((req_p->offset != req_p->size) && (req_p->packet == cy_false) &&
-		((cnt == ep_p->maxhaldata) || ((cnt == ep_p->maxhwdata) &&
-		((ep != CY_AS_MTP_READ_ENDPOINT) ||
-		(cnt == dev_p->usb_max_tx_size)))))
-			|| ((ep == 1) && (status == CY_AS_ERROR_TIMEOUT))) {
-		cy_as_hal_enable_interrupts(mask);
-
-		/*
-		 * and send the request again to send the next block of
-		 * data. special handling for MTP transfers on E_ps 2
-		 * and 6. the send_next_request will be processed based
-		 * on the event sent by the firmware.
-		 */
-		if ((ep == CY_AS_MTP_WRITE_ENDPOINT) || (
-				(ep == CY_AS_MTP_READ_ENDPOINT) &&
-				(!cy_as_dma_end_point_is_direction_in(ep_p))))
-			cy_as_dma_end_point_set_stopped(ep_p);
-		else
-			cy_as_dma_send_next_dma_request(dev_p, ep_p);
-	} else {
-		/*
-		 * we get here if ...
-		 *	we have sent or received all of the data
-		 *		 or
-		 *	we are doing a packet operation
-		 *		 or
-		 *	we receive a short packet
-		 */
-
-		/*
-		 * remove this entry from the DMA queue for this endpoint.
-		 */
-		cy_as_dma_end_point_clear_in_transit(ep_p);
-		ep_p->queue_p = req_p->next_p;
-		if (ep_p->last_p == req_p) {
-			/*
-			 * we have removed the last packet from the DMA queue,
-			 * disable the interrupt associated with this interrupt.
-			 */
-			ep_p->last_p = 0;
-			cy_as_hal_enable_interrupts(mask);
-			cy_as_dma_set_drq(dev_p, ep, cy_false);
-		} else
-			cy_as_hal_enable_interrupts(mask);
-
-		if (req_p->cb) {
-			/*
-			 * if the request has a callback associated with it,
-			 * call the callback to tell the interested party that
-			 * this DMA request has completed.
-			 *
-			 * note, we set the in_callback bit to insure that we
-			 * cannot recursively call an API function that is
-			 * synchronous only from a callback.
-			 */
-			cy_as_device_set_in_callback(dev_p);
-			(*req_p->cb)(dev_p, ep, req_p->buf_p,
-				req_p->offset, status);
-			cy_as_device_clear_in_callback(dev_p);
-		}
-
-		/*
-		 * we are done with this request, put it on the freelist to be
-		 * reused at a later time.
-		 */
-		cy_as_dma_add_request_to_free_queue(dev_p, req_p);
-
-		if (ep_p->queue_p == 0) {
-			/*
-			 * if the endpoint is out of DMA entries, set the
-			 * endpoint as stopped.
-			 */
-			cy_as_dma_end_point_set_stopped(ep_p);
-
-			/*
-			 * the DMA queue is empty, wake any task waiting on
-			 * the QUEUE to drain.
-			 */
-			if (cy_as_dma_end_point_is_sleeping(ep_p)) {
-				cy_as_dma_end_point_set_wake_state(ep_p);
-				cy_as_hal_wake(&ep_p->channel);
-			}
-		} else {
-			/*
-			 * if the queued operation is a MTP transfer,
-			 * wait until firmware event before sending
-			 * down the next DMA request.
-			 */
-			if ((ep == CY_AS_MTP_WRITE_ENDPOINT) ||
-				((ep == CY_AS_MTP_READ_ENDPOINT) &&
-				(!cy_as_dma_end_point_is_direction_in(ep_p))) ||
-				((ep == dev_p->storage_read_endpoint) &&
-				(!cy_as_device_is_p2s_dma_start_recvd(dev_p)))
-				|| ((ep == dev_p->storage_write_endpoint) &&
-				(!cy_as_device_is_p2s_dma_start_recvd(dev_p))))
-				cy_as_dma_end_point_set_stopped(ep_p);
-			else
-				cy_as_dma_send_next_dma_request(dev_p, ep_p);
-		}
-	}
-}
-
-/*
-* This function is used to kick start DMA on a given
-* channel.  If DMA is already running on the given
-* endpoint, nothing happens.  If DMA is not running,
-* the first entry is pulled from the DMA queue and
-* sent/recevied to/from the West Bridge device.
-*/
-cy_as_return_status_t
-cy_as_dma_kick_start(cy_as_device *dev_p, cy_as_end_point_number_t ep)
-{
-	cy_as_dma_end_point *ep_p;
-	cy_as_hal_assert(dev_p->sig == CY_AS_DEVICE_HANDLE_SIGNATURE);
-
-	ep_p = CY_AS_NUM_EP(dev_p, ep);
-
-	/* We are already running */
-	if (cy_as_dma_end_point_is_running(ep_p))
-		return CY_AS_ERROR_SUCCESS;
-
-	cy_as_dma_send_next_dma_request(dev_p, ep_p);
-	return CY_AS_ERROR_SUCCESS;
-}
-
-/*
- * This function stops the given endpoint.  Stopping and endpoint cancels
- * any pending DMA operations and frees all resources associated with the
- * given endpoint.
- */
-static cy_as_return_status_t
-cy_as_dma_stop_end_point(cy_as_device *dev_p, cy_as_end_point_number_t ep)
-{
-	cy_as_return_status_t ret;
-	cy_as_dma_end_point *ep_p = CY_AS_NUM_EP(dev_p, ep);
-
-	/*
-	 * cancel any pending DMA requests associated with this endpoint. this
-	 * cancels any DMA requests at the HAL layer as well as dequeues any
-	 * request that is currently pending.
-	 */
-	ret = cy_as_dma_cancel(dev_p, ep, CY_AS_ERROR_CANCELED);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/*
-	 * destroy the sleep channel
-	 */
-	if (!cy_as_hal_destroy_sleep_channel(&ep_p->channel)
-		&& ret == CY_AS_ERROR_SUCCESS)
-		ret = CY_AS_ERROR_DESTROY_SLEEP_CHANNEL_FAILED;
-
-	/*
-	 * free the memory associated with this endpoint
-	 */
-	cy_as_hal_free(ep_p);
-
-	/*
-	 * set the data structure ptr to something sane since the
-	 * previous pointer is now free.
-	 */
-	dev_p->endp[ep] = 0;
-
-	return ret;
-}
-
-/*
- * This method stops the USB stack.  This is an internal function that does
- * all of the work of destroying the USB stack without the protections that
- * we provide to the API (i.e. stopping at stack that is not running).
- */
-static cy_as_return_status_t
-cy_as_dma_stop_internal(cy_as_device *dev_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_return_status_t lret;
-	cy_as_end_point_number_t i;
-
-	/*
-	 * stop all of the endpoints.  this cancels all DMA requests, and
-	 * frees all resources associated with each endpoint.
-	 */
-	for (i = 0; i < sizeof(dev_p->endp)/(sizeof(dev_p->endp[0])); i++) {
-		lret = cy_as_dma_stop_end_point(dev_p, i);
-		if (lret != CY_AS_ERROR_SUCCESS && ret == CY_AS_ERROR_SUCCESS)
-			ret = lret;
-	}
-
-	/*
-	 * now, free the list of DMA requests structures that we use to manage
-	 * DMA requests.
-	 */
-	while (dev_p->dma_freelist_p) {
-		cy_as_dma_queue_entry *req_p;
-		uint32_t imask = cy_as_hal_disable_interrupts();
-
-		req_p = dev_p->dma_freelist_p;
-		dev_p->dma_freelist_p = req_p->next_p;
-
-		cy_as_hal_enable_interrupts(imask);
-
-		cy_as_hal_free(req_p);
-	}
-
-	cy_as_ll_destroy_request(dev_p, dev_p->usb_ep0_dma_req);
-	cy_as_ll_destroy_request(dev_p, dev_p->usb_ep1_dma_req);
-	cy_as_ll_destroy_response(dev_p, dev_p->usb_ep0_dma_resp);
-	cy_as_ll_destroy_response(dev_p, dev_p->usb_ep1_dma_resp);
-
-	return ret;
-}
-
-
-/*
- * CyAsDmaStop()
- *
- * This function shuts down the DMA module.  All resources
- * associated with the DMA module will be freed.  This
- * routine is the API stop function.  It insures that we
- * are stopping a stack that is actually running and then
- * calls the internal function to do the work.
- */
-cy_as_return_status_t
-cy_as_dma_stop(cy_as_device *dev_p)
-{
-	cy_as_return_status_t ret;
-
-	ret = cy_as_dma_stop_internal(dev_p);
-	cy_as_device_set_dma_stopped(dev_p);
-
-	return ret;
-}
-
-/*
- * CyAsDmaStart()
- *
- * This function initializes the DMA module to insure it is up and running.
- */
-cy_as_return_status_t
-cy_as_dma_start(cy_as_device *dev_p)
-{
-	cy_as_end_point_number_t i;
-	uint16_t cnt;
-
-	if (cy_as_device_is_dma_running(dev_p))
-		return CY_AS_ERROR_ALREADY_RUNNING;
-
-	/*
-	 * pre-allocate DMA queue structures to be used in the interrupt context
-	 */
-	for (cnt = 0; cnt < 32; cnt++) {
-		cy_as_dma_queue_entry *entry_p = (cy_as_dma_queue_entry *)
-			cy_as_hal_alloc(sizeof(cy_as_dma_queue_entry));
-		if (entry_p == 0) {
-			cy_as_dma_stop_internal(dev_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-		cy_as_dma_add_request_to_free_queue(dev_p, entry_p);
-	}
-
-	/*
-	 * pre-allocate the DMA requests for sending EP0
-	 * and EP1 data to west bridge
-	 */
-	dev_p->usb_ep0_dma_req = cy_as_ll_create_request(dev_p,
-		CY_RQT_USB_EP_DATA, CY_RQT_USB_RQT_CONTEXT, 64);
-	dev_p->usb_ep1_dma_req = cy_as_ll_create_request(dev_p,
-		CY_RQT_USB_EP_DATA, CY_RQT_USB_RQT_CONTEXT, 64);
-
-	if (dev_p->usb_ep0_dma_req == 0 || dev_p->usb_ep1_dma_req == 0) {
-		cy_as_dma_stop_internal(dev_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-	dev_p->usb_ep0_dma_req_save = dev_p->usb_ep0_dma_req;
-
-	dev_p->usb_ep0_dma_resp = cy_as_ll_create_response(dev_p, 1);
-	dev_p->usb_ep1_dma_resp = cy_as_ll_create_response(dev_p, 1);
-	if (dev_p->usb_ep0_dma_resp == 0 || dev_p->usb_ep1_dma_resp == 0) {
-		cy_as_dma_stop_internal(dev_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-	dev_p->usb_ep0_dma_resp_save = dev_p->usb_ep0_dma_resp;
-
-	/*
-	 * set the dev_p->endp to all zeros to insure cleanup is possible if
-	 * an error occurs during initialization.
-	 */
-	cy_as_hal_mem_set(dev_p->endp, 0, sizeof(dev_p->endp));
-
-	/*
-	 * now, iterate through each of the endpoints and initialize each
-	 * one.
-	 */
-	for (i = 0; i < sizeof(dev_p->endp)/sizeof(dev_p->endp[0]); i++) {
-		dev_p->endp[i] = (cy_as_dma_end_point *)
-			cy_as_hal_alloc(sizeof(cy_as_dma_end_point));
-		if (dev_p->endp[i] == 0) {
-			cy_as_dma_stop_internal(dev_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-		cy_as_hal_mem_set(dev_p->endp[i], 0,
-			sizeof(cy_as_dma_end_point));
-
-		dev_p->endp[i]->ep = i;
-		dev_p->endp[i]->queue_p = 0;
-		dev_p->endp[i]->last_p = 0;
-
-		cy_as_dma_set_drq(dev_p, i, cy_false);
-
-		if (!cy_as_hal_create_sleep_channel(&dev_p->endp[i]->channel))
-			return CY_AS_ERROR_CREATE_SLEEP_CHANNEL_FAILED;
-	}
-
-	/*
-	 * tell the HAL layer who to call when the
-	 * HAL layer completes a DMA request
-	 */
-	cy_as_hal_dma_register_callback(dev_p->tag,
-		cy_as_dma_completed_callback);
-
-	/*
-	 * mark DMA as up and running on this device
-	 */
-	cy_as_device_set_dma_running(dev_p);
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-/*
-* Wait for all entries in the DMA queue associated
-* the given endpoint to be drained.  This function
-* will not return until all the DMA data has been
-* transferred.
-*/
-cy_as_return_status_t
-cy_as_dma_drain_queue(cy_as_device *dev_p,
-	cy_as_end_point_number_t ep, cy_bool kickstart)
-{
-	cy_as_dma_end_point *ep_p;
-	int loopcount = 1000;
-	uint32_t mask;
-
-	/*
-	* make sure the endpoint is valid
-	*/
-	if (ep >= sizeof(dev_p->endp)/sizeof(dev_p->endp[0]))
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	/* Get the endpoint pointer based on the endpoint number */
-	ep_p = CY_AS_NUM_EP(dev_p, ep);
-
-	/*
-	* if the endpoint is empty of traffic, we return
-	* with success immediately
-	*/
-	mask = cy_as_hal_disable_interrupts();
-	if (ep_p->queue_p == 0) {
-		cy_as_hal_enable_interrupts(mask);
-		return CY_AS_ERROR_SUCCESS;
-	} else {
-		/*
-		 * add 10 seconds to the time out value for each 64 KB segment
-		 * of data to be transferred.
-		 */
-		if (ep_p->queue_p->size > 0x10000)
-			loopcount += ((ep_p->queue_p->size / 0x10000) * 1000);
-	}
-	cy_as_hal_enable_interrupts(mask);
-
-	/* If we are already sleeping on this endpoint, it is an error */
-	if (cy_as_dma_end_point_is_sleeping(ep_p))
-		return CY_AS_ERROR_NESTED_SLEEP;
-
-	/*
-	* we disable the endpoint while the queue drains to
-	* prevent any additional requests from being queued while we are waiting
-	*/
-	cy_as_dma_enable_end_point(dev_p, ep,
-		cy_false, cy_as_direction_dont_change);
-
-	if (kickstart) {
-		/*
-		* now, kick start the DMA if necessary
-		*/
-		cy_as_dma_kick_start(dev_p, ep);
-	}
-
-	/*
-	* check one last time before we begin sleeping to see if the
-	* queue is drained.
-	*/
-	if (ep_p->queue_p == 0) {
-		cy_as_dma_enable_end_point(dev_p, ep, cy_true,
-			cy_as_direction_dont_change);
-		return CY_AS_ERROR_SUCCESS;
-	}
-
-	while (loopcount-- > 0) {
-		/*
-		 * sleep for 10 ms maximum (per loop) while
-		 * waiting for the transfer to complete.
-		 */
-		cy_as_dma_end_point_set_sleep_state(ep_p);
-		cy_as_hal_sleep_on(&ep_p->channel, 10);
-
-		/* If we timed out, the sleep bit will still be set */
-		cy_as_dma_end_point_set_wake_state(ep_p);
-
-		/* Check the queue to see if is drained */
-		if (ep_p->queue_p == 0) {
-			/*
-			 * clear the endpoint running and in transit flags
-			 * for the endpoint, now that its DMA queue is empty.
-			 */
-			cy_as_dma_end_point_clear_in_transit(ep_p);
-			cy_as_dma_end_point_set_stopped(ep_p);
-
-			cy_as_dma_enable_end_point(dev_p, ep,
-				cy_true, cy_as_direction_dont_change);
-			return CY_AS_ERROR_SUCCESS;
-		}
-	}
-
-	/*
-	 * the DMA operation that has timed out can be cancelled, so that later
-	 * operations on this queue can proceed.
-	 */
-	cy_as_dma_cancel(dev_p, ep, CY_AS_ERROR_TIMEOUT);
-	cy_as_dma_enable_end_point(dev_p, ep,
-		cy_true, cy_as_direction_dont_change);
-	return CY_AS_ERROR_TIMEOUT;
-}
-
-/*
-* This function queues a write request in the DMA queue
-* for a given endpoint.  The direction of the
-* entry will be inferred from the endpoint direction.
-*/
-cy_as_return_status_t
-cy_as_dma_queue_request(cy_as_device *dev_p,
-	cy_as_end_point_number_t ep, void *mem_p,
-	uint32_t size, cy_bool pkt, cy_bool readreq, cy_as_dma_callback cb)
-{
-	uint32_t mask;
-	cy_as_dma_queue_entry *entry_p;
-	cy_as_dma_end_point *ep_p;
-
-	/*
-	* make sure the endpoint is valid
-	*/
-	if (ep >= sizeof(dev_p->endp)/sizeof(dev_p->endp[0]))
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	/* Get the endpoint pointer based on the endpoint number */
-	ep_p = CY_AS_NUM_EP(dev_p, ep);
-
-	if (!cy_as_dma_end_point_is_enabled(ep_p))
-		return CY_AS_ERROR_ENDPOINT_DISABLED;
-
-	entry_p = cy_as_dma_get_dma_queue_entry(dev_p);
-
-	entry_p->buf_p = mem_p;
-	entry_p->cb = cb;
-	entry_p->size = size;
-	entry_p->offset = 0;
-	entry_p->packet = pkt;
-	entry_p->readreq = readreq;
-
-	mask = cy_as_hal_disable_interrupts();
-	entry_p->next_p = 0;
-	if (ep_p->last_p)
-		ep_p->last_p->next_p = entry_p;
-	ep_p->last_p = entry_p;
-	if (ep_p->queue_p == 0)
-		ep_p->queue_p = entry_p;
-	cy_as_hal_enable_interrupts(mask);
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-/*
-* This function enables or disables and endpoint for DMA
-* queueing.  If an endpoint is disabled, any queue requests
-* continue to be processed, but no new requests can be queued.
-*/
-cy_as_return_status_t
-cy_as_dma_enable_end_point(cy_as_device *dev_p,
-	cy_as_end_point_number_t ep, cy_bool enable, cy_as_dma_direction dir)
-{
-	cy_as_dma_end_point *ep_p;
-
-	/*
-	* make sure the endpoint is valid
-	*/
-	if (ep >= sizeof(dev_p->endp)/sizeof(dev_p->endp[0]))
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	/* Get the endpoint pointer based on the endpoint number */
-	ep_p = CY_AS_NUM_EP(dev_p, ep);
-
-	if (dir == cy_as_direction_out)
-		cy_as_dma_end_point_set_direction_out(ep_p);
-	else if (dir == cy_as_direction_in)
-		cy_as_dma_end_point_set_direction_in(ep_p);
-
-	/*
-	* get the maximum size of data buffer the HAL
-	* layer can accept.  this is used when the DMA
-	* module is sending DMA requests to the HAL.
-	* the DMA module will never send down a request
-	* that is greater than this value.
-	*
-	* for EP0 and EP1, we can send no more than 64
-	* bytes of data at one time as this is the maximum
-	* size of a packet that can be sent via these
-	* endpoints.
-	*/
-	if (ep == 0 || ep == 1)
-		ep_p->maxhaldata = 64;
-	else
-		ep_p->maxhaldata = cy_as_hal_dma_max_request_size(
-						dev_p->tag, ep);
-
-	if (enable)
-		cy_as_dma_end_point_enable(ep_p);
-	else
-		cy_as_dma_end_point_disable(ep_p);
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-/*
- * This function cancels any DMA operations pending with the HAL layer as well
- * as any DMA operation queued on the endpoint.
- */
-cy_as_return_status_t
-cy_as_dma_cancel(
-	cy_as_device *dev_p,
-	cy_as_end_point_number_t ep,
-	cy_as_return_status_t err)
-{
-	uint32_t mask;
-	cy_as_dma_end_point *ep_p;
-	cy_as_dma_queue_entry *entry_p;
-	cy_bool epstate;
-
-	/*
-	 * make sure the endpoint is valid
-	 */
-	if (ep >= sizeof(dev_p->endp)/sizeof(dev_p->endp[0]))
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	/* Get the endpoint pointer based on the endpoint number */
-	ep_p = CY_AS_NUM_EP(dev_p, ep);
-
-	if (ep_p) {
-		/* Remember the state of the endpoint */
-		epstate = cy_as_dma_end_point_is_enabled(ep_p);
-
-		/*
-		 * disable the endpoint so no more DMA packets can be
-		 * queued.
-		 */
-		cy_as_dma_enable_end_point(dev_p, ep,
-			cy_false, cy_as_direction_dont_change);
-
-		/*
-		 * don't allow any interrupts from this endpoint
-		 * while we get the most current request off of
-		 * the queue.
-		 */
-		cy_as_dma_set_drq(dev_p, ep, cy_false);
-
-		/*
-		 * cancel any pending request queued in the HAL layer
-		 */
-		if (cy_as_dma_end_point_in_transit(ep_p))
-			cy_as_hal_dma_cancel_request(dev_p->tag, ep_p->ep);
-
-		/*
-		 * shutdown the DMA for this endpoint so no
-		 * more data is transferred
-		 */
-		cy_as_dma_end_point_set_stopped(ep_p);
-
-		/*
-		 * mark the endpoint as not in transit, because we are
-		 * going to consume any queued requests
-		 */
-		cy_as_dma_end_point_clear_in_transit(ep_p);
-
-		/*
-		 * now, remove each entry in the queue and call the
-		 * associated callback stating that the request was
-		 * canceled.
-		 */
-		ep_p->last_p = 0;
-		while (ep_p->queue_p != 0) {
-			/* Disable interrupts to manipulate the queue */
-			mask = cy_as_hal_disable_interrupts();
-
-			/* Remove an entry from the queue */
-			entry_p = ep_p->queue_p;
-			ep_p->queue_p = entry_p->next_p;
-
-			/* Ok, the queue has been updated, we can
-			 * turn interrupts back on */
-			cy_as_hal_enable_interrupts(mask);
-
-			/* Call the callback indicating we have
-			 * canceled the DMA */
-			if (entry_p->cb)
-				entry_p->cb(dev_p, ep,
-					entry_p->buf_p, entry_p->size, err);
-
-			cy_as_dma_add_request_to_free_queue(dev_p, entry_p);
-		}
-
-		if (ep == 0 || ep == 1) {
-			/*
-			 * if this endpoint is zero or one, we need to
-			 * clear the queue of any pending CY_RQT_USB_EP_DATA
-			 * requests as these are pending requests to send
-			 * data to the west bridge device.
-			 */
-			cy_as_ll_remove_ep_data_requests(dev_p, ep);
-		}
-
-		if (epstate) {
-			/*
-			 * the endpoint started out enabled, so we
-			 * re-enable the endpoint here.
-			 */
-			cy_as_dma_enable_end_point(dev_p, ep,
-				cy_true, cy_as_direction_dont_change);
-		}
-	}
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-cy_as_return_status_t
-cy_as_dma_received_data(cy_as_device *dev_p,
-	cy_as_end_point_number_t ep, uint32_t dsize, void *data)
-{
-	cy_as_dma_queue_entry *dma_p;
-	uint8_t *src_p, *dest_p;
-	cy_as_dma_end_point *ep_p;
-	uint32_t xfersize;
-
-	/*
-	 * make sure the endpoint is valid
-	 */
-	if (ep != 0 && ep != 1)
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	/* Get the endpoint pointer based on the endpoint number */
-	ep_p = CY_AS_NUM_EP(dev_p, ep);
-	dma_p = ep_p->queue_p;
-	if (dma_p == 0)
-		return CY_AS_ERROR_SUCCESS;
-
-	/*
-	 * if the data received exceeds the size of the DMA buffer,
-	 * clip the data to the size of the buffer.  this can lead
-	 * to losing some data, but is not different than doing
-	 * non-packet reads on the other endpoints.
-	 */
-	if (dsize > dma_p->size - dma_p->offset)
-		dsize = dma_p->size - dma_p->offset;
-
-	/*
-	 * copy the data from the request packet to the DMA buffer
-	 * for the endpoint
-	 */
-	src_p = (uint8_t *)data;
-	dest_p = ((uint8_t *)(dma_p->buf_p)) + dma_p->offset;
-	xfersize = dsize;
-	while (xfersize-- > 0)
-		*dest_p++ = *src_p++;
-
-	/* Signal the DMA module that we have
-	 * received data for this EP request */
-	cy_as_dma_completed_callback(dev_p->tag,
-		ep, dsize, CY_AS_ERROR_SUCCESS);
-
-	return CY_AS_ERROR_SUCCESS;
-}
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasintr.c b/drivers/staging/westbridge/astoria/api/src/cyasintr.c
deleted file mode 100644
index b60f69ce5985..000000000000
--- a/drivers/staging/westbridge/astoria/api/src/cyasintr.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/* Cypress West Bridge API source file (cyasintr.c)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#include "../../include/linux/westbridge/cyashal.h"
-#include "../../include/linux/westbridge/cyasdevice.h"
-#include "../../include/linux/westbridge/cyasregs.h"
-#include "../../include/linux/westbridge/cyaserr.h"
-
-extern void cy_as_mail_box_interrupt_handler(cy_as_device *);
-
-void
-cy_as_mcu_interrupt_handler(cy_as_device *dev_p)
-{
-	/* Read and clear the interrupt. */
-	uint16_t v;
-
-	v = cy_as_hal_read_register(dev_p->tag, CY_AS_MEM_P0_MCU_STAT);
-	v = v;
-}
-
-void
-cy_as_power_management_interrupt_handler(cy_as_device *dev_p)
-{
-	uint16_t v;
-
-	v = cy_as_hal_read_register(dev_p->tag, CY_AS_MEM_PWR_MAGT_STAT);
-	v = v;
-}
-
-void
-cy_as_pll_lock_loss_interrupt_handler(cy_as_device *dev_p)
-{
-	uint16_t v;
-
-	v = cy_as_hal_read_register(dev_p->tag, CY_AS_MEM_PLL_LOCK_LOSS_STAT);
-	v = v;
-}
-
-uint32_t cy_as_intr_start(cy_as_device *dev_p, cy_bool dmaintr)
-{
-	uint16_t v;
-
-	cy_as_hal_assert(dev_p->sig == CY_AS_DEVICE_HANDLE_SIGNATURE);
-
-	if (cy_as_device_is_intr_running(dev_p) != 0)
-		return CY_AS_ERROR_ALREADY_RUNNING;
-
-	v = CY_AS_MEM_P0_INT_MASK_REG_MMCUINT |
-		CY_AS_MEM_P0_INT_MASK_REG_MMBINT |
-		CY_AS_MEM_P0_INT_MASK_REG_MPMINT;
-
-	if (dmaintr)
-		v |= CY_AS_MEM_P0_INT_MASK_REG_MDRQINT;
-
-	/* Enable the interrupts of interest */
-	cy_as_hal_write_register(dev_p->tag, CY_AS_MEM_P0_INT_MASK_REG, v);
-
-	/* Mark the interrupt module as initialized */
-	cy_as_device_set_intr_running(dev_p);
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-uint32_t cy_as_intr_stop(cy_as_device *dev_p)
-{
-	cy_as_hal_assert(dev_p->sig == CY_AS_DEVICE_HANDLE_SIGNATURE);
-
-	if (cy_as_device_is_intr_running(dev_p) == 0)
-		return CY_AS_ERROR_NOT_RUNNING;
-
-	cy_as_hal_write_register(dev_p->tag, CY_AS_MEM_P0_INT_MASK_REG, 0);
-	cy_as_device_set_intr_stopped(dev_p);
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-void cy_as_intr_service_interrupt(cy_as_hal_device_tag tag)
-{
-	uint16_t v;
-	cy_as_device *dev_p;
-
-	dev_p = cy_as_device_find_from_tag(tag);
-
-	/*
-	 * only power management interrupts can occur before the
-	 * antioch API setup is complete. if this is a PM interrupt
-	 *  handle it here; otherwise output a warning message.
-	 */
-	if (dev_p == 0) {
-		v = cy_as_hal_read_register(tag, CY_AS_MEM_P0_INTR_REG);
-		if (v == CY_AS_MEM_P0_INTR_REG_PMINT) {
-			/* Read the PWR_MAGT_STAT register
-			 * to clear this interrupt. */
-			v = cy_as_hal_read_register(tag,
-				CY_AS_MEM_PWR_MAGT_STAT);
-		} else
-			cy_as_hal_print_message("stray antioch "
-				"interrupt detected"
-				", tag not associated "
-				"with any created device.");
-		return;
-	}
-
-	/* Make sure we got a valid object from CyAsDeviceFindFromTag */
-	cy_as_hal_assert(dev_p->sig == CY_AS_DEVICE_HANDLE_SIGNATURE);
-
-	v = cy_as_hal_read_register(dev_p->tag, CY_AS_MEM_P0_INTR_REG);
-
-	if (v & CY_AS_MEM_P0_INTR_REG_MCUINT)
-		cy_as_mcu_interrupt_handler(dev_p);
-
-	if (v & CY_AS_MEM_P0_INTR_REG_PMINT)
-		cy_as_power_management_interrupt_handler(dev_p);
-
-	if (v & CY_AS_MEM_P0_INTR_REG_PLLLOCKINT)
-		cy_as_pll_lock_loss_interrupt_handler(dev_p);
-
-	/* If the interrupt module is not running, no mailbox
-	 * interrupts are expected from the west bridge. */
-	if (cy_as_device_is_intr_running(dev_p) == 0)
-		return;
-
-	if (v & CY_AS_MEM_P0_INTR_REG_MBINT)
-		cy_as_mail_box_interrupt_handler(dev_p);
-}
diff --git a/drivers/staging/westbridge/astoria/api/src/cyaslep2pep.c b/drivers/staging/westbridge/astoria/api/src/cyaslep2pep.c
deleted file mode 100644
index 76821e51b817..000000000000
--- a/drivers/staging/westbridge/astoria/api/src/cyaslep2pep.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/* Cypress West Bridge API source file (cyaslep2pep.c)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#include "../../include/linux/westbridge/cyashal.h"
-#include "../../include/linux/westbridge/cyasusb.h"
-#include "../../include/linux/westbridge/cyaserr.h"
-#include "../../include/linux/westbridge/cyaslowlevel.h"
-#include "../../include/linux/westbridge/cyasdma.h"
-
-typedef enum cy_as_physical_endpoint_state {
-	cy_as_e_p_free,
-	cy_as_e_p_in,
-	cy_as_e_p_out,
-	cy_as_e_p_iso_in,
-	cy_as_e_p_iso_out
-} cy_as_physical_endpoint_state;
-
-
-/*
-* This map is used to map an index between 1 and 10
-* to a logical endpoint number.  This is used to map
-* LEP register indexes into actual EP numbers.
-*/
-static cy_as_end_point_number_t end_point_map[] = {
-	3, 5, 7, 9, 10, 11, 12, 13, 14, 15 };
-
-#define CY_AS_EPCFG_1024			(1 << 3)
-#define CY_AS_EPCFG_DBL			 (0x02)
-#define CY_AS_EPCFG_TRIPLE		  (0x03)
-#define CY_AS_EPCFG_QUAD			(0x00)
-
-/*
- * NB: This table contains the register values for PEP1
- * and PEP3.  PEP2 and PEP4 only have a bit to change the
- * direction of the PEP and therefre are not represented
- * in this table.
- */
-static uint8_t pep_register_values[12][4] = {
-	/* Bit 1:0 buffering, 0 = quad, 2 = double, 3 = triple */
-	/* Bit 3 size, 0 = 512, 1 = 1024 */
-	{
-		CY_AS_EPCFG_DBL,
-		CY_AS_EPCFG_DBL,
-	},/* Config 1  - PEP1 (2 * 512), PEP2 (2 * 512),
-	   * PEP3 (2 * 512), PEP4 (2 * 512) */
-	{
-		CY_AS_EPCFG_DBL,
-		CY_AS_EPCFG_QUAD,
-	}, /* Config 2  - PEP1 (2 * 512), PEP2 (2 * 512),
-		* PEP3 (4 * 512), PEP4 (N/A) */
-	{
-		CY_AS_EPCFG_DBL,
-		CY_AS_EPCFG_DBL | CY_AS_EPCFG_1024,
-	},/* Config 3  - PEP1 (2 * 512), PEP2 (2 * 512),
-	   * PEP3 (2 * 1024), PEP4(N/A) */
-	{
-		CY_AS_EPCFG_QUAD,
-		CY_AS_EPCFG_DBL,
-	},/* Config 4  - PEP1 (4 * 512), PEP2 (N/A),
-	   * PEP3 (2 * 512), PEP4 (2 * 512) */
-	{
-		CY_AS_EPCFG_QUAD,
-		CY_AS_EPCFG_QUAD,
-	},/* Config 5  - PEP1 (4 * 512), PEP2 (N/A),
-	   * PEP3 (4 * 512), PEP4 (N/A) */
-	{
-		CY_AS_EPCFG_QUAD,
-		CY_AS_EPCFG_1024 | CY_AS_EPCFG_DBL,
-	},/* Config 6  - PEP1 (4 * 512), PEP2 (N/A),
-	   * PEP3 (2 * 1024), PEP4 (N/A) */
-	{
-		CY_AS_EPCFG_1024 | CY_AS_EPCFG_DBL,
-		CY_AS_EPCFG_DBL,
-	},/* Config 7  - PEP1 (2 * 1024), PEP2 (N/A),
-	   * PEP3 (2 * 512), PEP4 (2 * 512) */
-	{
-		CY_AS_EPCFG_1024 | CY_AS_EPCFG_DBL,
-		CY_AS_EPCFG_QUAD,
-	},/* Config 8  - PEP1 (2 * 1024), PEP2 (N/A),
-	   * PEP3 (4 * 512), PEP4 (N/A) */
-	{
-		CY_AS_EPCFG_1024 | CY_AS_EPCFG_DBL,
-		CY_AS_EPCFG_1024 | CY_AS_EPCFG_DBL,
-	},/* Config 9  - PEP1 (2 * 1024), PEP2 (N/A),
-	   * PEP3 (2 * 1024), PEP4 (N/A)*/
-	{
-		CY_AS_EPCFG_TRIPLE,
-		CY_AS_EPCFG_TRIPLE,
-	},/* Config 10 - PEP1 (3 * 512), PEP2 (N/A),
-	   * PEP3 (3 * 512), PEP4 (2 * 512)*/
-	{
-		CY_AS_EPCFG_TRIPLE | CY_AS_EPCFG_1024,
-		CY_AS_EPCFG_DBL,
-	},/* Config 11 - PEP1 (3 * 1024), PEP2 (N/A),
-	   * PEP3 (N/A), PEP4 (2 * 512) */
-	{
-		CY_AS_EPCFG_QUAD | CY_AS_EPCFG_1024,
-		CY_AS_EPCFG_DBL,
-	},/* Config 12 - PEP1 (4 * 1024), PEP2 (N/A),
-	   * PEP3 (N/A), PEP4 (N/A) */
-};
-
-static cy_as_return_status_t
-find_endpoint_directions(cy_as_device *dev_p,
-	cy_as_physical_endpoint_state epstate[4])
-{
-	int i;
-	cy_as_physical_endpoint_state desired;
-
-	/*
-	 * note, there is no error checking here because
-	 * ISO error checking happens when the API is called.
-	 */
-	for (i = 0; i < 10; i++) {
-		int epno = end_point_map[i];
-		if (dev_p->usb_config[epno].enabled) {
-			int pep = dev_p->usb_config[epno].physical;
-			if (dev_p->usb_config[epno].type == cy_as_usb_iso) {
-				/*
-				 * marking this as an ISO endpoint, removes the
-				 * physical EP from consideration when
-				 * mapping the remaining E_ps.
-				 */
-				if (dev_p->usb_config[epno].dir == cy_as_usb_in)
-					desired = cy_as_e_p_iso_in;
-				else
-					desired = cy_as_e_p_iso_out;
-			} else {
-				if (dev_p->usb_config[epno].dir == cy_as_usb_in)
-					desired = cy_as_e_p_in;
-				else
-					desired = cy_as_e_p_out;
-			}
-
-			/*
-			 * NB: Note the API calls insure that an ISO endpoint
-			 * has a physical and logical EP number that are the
-			 * same, therefore this condition is not enforced here.
-			 */
-			if (epstate[pep - 1] !=
-				cy_as_e_p_free && epstate[pep - 1] != desired)
-				return CY_AS_ERROR_INVALID_CONFIGURATION;
-
-			epstate[pep - 1] = desired;
-		}
-	}
-
-	/*
-	 * create the EP1 config values directly.
-	 * both EP1OUT and EP1IN are invalid by default.
-	 */
-	dev_p->usb_ep1cfg[0] = 0;
-	dev_p->usb_ep1cfg[1] = 0;
-	if (dev_p->usb_config[1].enabled) {
-		if ((dev_p->usb_config[1].dir == cy_as_usb_out) ||
-			(dev_p->usb_config[1].dir == cy_as_usb_in_out)) {
-			/* Set the valid bit and type field. */
-			dev_p->usb_ep1cfg[0] = (1 << 7);
-			if (dev_p->usb_config[1].type == cy_as_usb_bulk)
-				dev_p->usb_ep1cfg[0] |= (2 << 4);
-			else
-				dev_p->usb_ep1cfg[0] |= (3 << 4);
-		}
-
-		if ((dev_p->usb_config[1].dir == cy_as_usb_in) ||
-		(dev_p->usb_config[1].dir == cy_as_usb_in_out)) {
-			/* Set the valid bit and type field. */
-			dev_p->usb_ep1cfg[1] = (1 << 7);
-			if (dev_p->usb_config[1].type == cy_as_usb_bulk)
-				dev_p->usb_ep1cfg[1] |= (2 << 4);
-			else
-				dev_p->usb_ep1cfg[1] |= (3 << 4);
-		}
-	}
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-static void
-create_register_settings(cy_as_device *dev_p,
-	cy_as_physical_endpoint_state epstate[4])
-{
-	int i;
-	uint8_t v;
-
-	for (i = 0; i < 4; i++) {
-		if (i == 0) {
-			/* Start with the values that specify size */
-			dev_p->usb_pepcfg[i] =
-				pep_register_values
-					[dev_p->usb_phy_config - 1][0];
-		} else if (i == 2) {
-			/* Start with the values that specify size */
-			dev_p->usb_pepcfg[i] =
-				pep_register_values
-					[dev_p->usb_phy_config - 1][1];
-		} else
-			dev_p->usb_pepcfg[i] = 0;
-
-		/* Adjust direction if it is in */
-		if (epstate[i] == cy_as_e_p_iso_in ||
-			epstate[i] == cy_as_e_p_in)
-			dev_p->usb_pepcfg[i] |= (1 << 6);
-	}
-
-	/* Configure the logical EP registers */
-	for (i = 0; i < 10; i++) {
-		int val;
-		int epnum = end_point_map[i];
-
-		v = 0x10;	  /* PEP 1, Bulk Endpoint, EP not valid */
-		if (dev_p->usb_config[epnum].enabled) {
-			v |= (1 << 7);	 /* Enabled */
-
-			val = dev_p->usb_config[epnum].physical - 1;
-			cy_as_hal_assert(val >= 0 && val <= 3);
-			v |= (val << 5);
-
-			switch (dev_p->usb_config[epnum].type) {
-			case cy_as_usb_bulk:
-				val = 2;
-				break;
-			case cy_as_usb_int:
-				val = 3;
-				break;
-			case cy_as_usb_iso:
-				val = 1;
-				break;
-			default:
-				cy_as_hal_assert(cy_false);
-				break;
-			}
-			v |= (val << 3);
-		}
-
-		dev_p->usb_lepcfg[i] = v;
-	}
-}
-
-
-cy_as_return_status_t
-cy_as_usb_map_logical2_physical(cy_as_device *dev_p)
-{
-	cy_as_return_status_t ret;
-
-	/* Physical EPs 3 5 7 9 respectively in the array */
-	cy_as_physical_endpoint_state epstate[4] = {
-		cy_as_e_p_free, cy_as_e_p_free,
-			cy_as_e_p_free, cy_as_e_p_free };
-
-	/* Find the direction for the endpoints */
-	ret = find_endpoint_directions(dev_p, epstate);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/*
-	 * now create the register settings based on the given
-	 * assigned of logical E_ps to physical endpoints.
-	 */
-	create_register_settings(dev_p, epstate);
-
-	return ret;
-}
-
-static uint16_t
-get_max_dma_size(cy_as_device *dev_p, cy_as_end_point_number_t ep)
-{
-	uint16_t size = dev_p->usb_config[ep].size;
-
-	if (size == 0) {
-		switch (dev_p->usb_config[ep].type) {
-		case cy_as_usb_control:
-			size = 64;
-			break;
-
-		case cy_as_usb_bulk:
-			size = cy_as_device_is_usb_high_speed(dev_p) ?
-				512 : 64;
-			break;
-
-		case cy_as_usb_int:
-			size = cy_as_device_is_usb_high_speed(dev_p) ?
-				1024 : 64;
-			break;
-
-		case cy_as_usb_iso:
-			size = cy_as_device_is_usb_high_speed(dev_p) ?
-				1024 : 1023;
-			break;
-		}
-	}
-
-	return size;
-}
-
-cy_as_return_status_t
-cy_as_usb_set_dma_sizes(cy_as_device *dev_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint32_t i;
-
-	for (i = 0; i < 10; i++) {
-		cy_as_usb_end_point_config *config_p =
-			&dev_p->usb_config[end_point_map[i]];
-		if (config_p->enabled) {
-			ret = cy_as_dma_set_max_dma_size(dev_p,
-				end_point_map[i],
-				get_max_dma_size(dev_p, end_point_map[i]));
-			if (ret != CY_AS_ERROR_SUCCESS)
-				break;
-		}
-	}
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_usb_setup_dma(cy_as_device *dev_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint32_t i;
-
-	for (i = 0; i < 10; i++) {
-		cy_as_usb_end_point_config *config_p =
-			&dev_p->usb_config[end_point_map[i]];
-		if (config_p->enabled) {
-			/* Map the endpoint direction to the DMA direction */
-			cy_as_dma_direction dir = cy_as_direction_out;
-			if (config_p->dir == cy_as_usb_in)
-				dir = cy_as_direction_in;
-
-			ret = cy_as_dma_enable_end_point(dev_p,
-				end_point_map[i], cy_true, dir);
-			if (ret != CY_AS_ERROR_SUCCESS)
-				break;
-		}
-	}
-
-	return ret;
-}
diff --git a/drivers/staging/westbridge/astoria/api/src/cyaslowlevel.c b/drivers/staging/westbridge/astoria/api/src/cyaslowlevel.c
deleted file mode 100644
index 96a86d088305..000000000000
--- a/drivers/staging/westbridge/astoria/api/src/cyaslowlevel.c
+++ /dev/null
@@ -1,1264 +0,0 @@
-/* Cypress West Bridge API source file (cyaslowlevel.c)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#include "../../include/linux/westbridge/cyashal.h"
-#include "../../include/linux/westbridge/cyascast.h"
-#include "../../include/linux/westbridge/cyasdevice.h"
-#include "../../include/linux/westbridge/cyaslowlevel.h"
-#include "../../include/linux/westbridge/cyasintr.h"
-#include "../../include/linux/westbridge/cyaserr.h"
-#include "../../include/linux/westbridge/cyasregs.h"
-
-static const uint32_t cy_as_low_level_timeout_count = 65536 * 4;
-
-/* Forward declaration */
-static cy_as_return_status_t cy_as_send_one(cy_as_device *dev_p,
-	cy_as_ll_request_response *req_p);
-
-/*
-* This array holds the size of the largest request we will ever recevie from
-* the West Bridge device per context.  The size is in 16 bit words.  Note a
-* size of 0xffff indicates that there will be no requests on this context
-* from West Bridge.
-*/
-static uint16_t max_request_length[CY_RQT_CONTEXT_COUNT] = {
-	8, /* CY_RQT_GENERAL_RQT_CONTEXT - CY_RQT_INITIALIZATION_COMPLETE */
-	8, /* CY_RQT_RESOURCE_RQT_CONTEXT - none */
-	8, /* CY_RQT_STORAGE_RQT_CONTEXT - CY_RQT_MEDIA_CHANGED */
-	128, /* CY_RQT_USB_RQT_CONTEXT - CY_RQT_USB_EVENT */
-	8 /* CY_RQT_TUR_RQT_CONTEXT - CY_RQT_TURBO_CMD_FROM_HOST */
-};
-
-/*
-* For the given context, this function removes the request node at the head
-* of the queue from the context.  This is called after all processing has
-* occurred on the given request and response and we are ready to remove this
-* entry from the queue.
-*/
-static void
-cy_as_ll_remove_request_queue_head(cy_as_device *dev_p, cy_as_context *ctxt_p)
-{
-	uint32_t mask, state;
-	cy_as_ll_request_list_node *node_p;
-
-	(void)dev_p;
-	cy_as_hal_assert(ctxt_p->request_queue_p != 0);
-
-	mask = cy_as_hal_disable_interrupts();
-	node_p = ctxt_p->request_queue_p;
-	ctxt_p->request_queue_p = node_p->next;
-	cy_as_hal_enable_interrupts(mask);
-
-	node_p->callback = 0;
-	node_p->rqt = 0;
-	node_p->resp = 0;
-
-	/*
-	* note that the caller allocates and destroys the request and
-	* response.  generally the destroy happens in the callback for
-	* async requests and after the wait returns for sync.  the
-	* request and response may not actually be destroyed but may be
-	* managed in other ways as well.  it is the responsibilty of
-	* the caller to deal with these in any case.  the caller can do
-	* this in the request/response callback function.
-	*/
-	state = cy_as_hal_disable_interrupts();
-	cy_as_hal_c_b_free(node_p);
-	cy_as_hal_enable_interrupts(state);
-}
-
-/*
-* For the context given, this function sends the next request to
-* West Bridge via the mailbox register, if the next request is
-* ready to be sent and has not already been sent.
-*/
-static void
-cy_as_ll_send_next_request(cy_as_device *dev_p, cy_as_context *ctxt_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	/*
-	* ret == ret is equivalent to while (1) but eliminates compiler
-	* warnings for some compilers.
-	*/
-	while (ret == ret) {
-		cy_as_ll_request_list_node *node_p = ctxt_p->request_queue_p;
-		if (node_p == 0)
-			break;
-
-		if (cy_as_request_get_node_state(node_p) !=
-			CY_AS_REQUEST_LIST_STATE_QUEUED)
-			break;
-
-		cy_as_request_set_node_state(node_p,
-			CY_AS_REQUEST_LIST_STATE_WAITING);
-		ret = cy_as_send_one(dev_p, node_p->rqt);
-		if (ret == CY_AS_ERROR_SUCCESS)
-			break;
-
-		/*
-		* if an error occurs in sending the request, tell the requester
-		* about the error and remove the request from the queue.
-		*/
-		cy_as_request_set_node_state(node_p,
-			CY_AS_REQUEST_LIST_STATE_RECEIVED);
-		node_p->callback(dev_p, ctxt_p->number,
-			node_p->rqt, node_p->resp, ret);
-		cy_as_ll_remove_request_queue_head(dev_p, ctxt_p);
-
-		/*
-		* this falls through to the while loop to send the next request
-		* since the previous request did not get sent.
-		*/
-	}
-}
-
-/*
-* This method removes an entry from the request queue of a given context.
-* The entry is removed only if it is not in transit.
-*/
-cy_as_remove_request_result_t
-cy_as_ll_remove_request(cy_as_device *dev_p, cy_as_context *ctxt_p,
-	cy_as_ll_request_response *req_p, cy_bool force)
-{
-	uint32_t imask;
-	cy_as_ll_request_list_node *node_p;
-	cy_as_ll_request_list_node *tmp_p;
-	uint32_t state;
-
-	imask = cy_as_hal_disable_interrupts();
-	if (ctxt_p->request_queue_p != 0 &&
-		ctxt_p->request_queue_p->rqt == req_p) {
-		node_p = ctxt_p->request_queue_p;
-		if ((cy_as_request_get_node_state(node_p) ==
-			CY_AS_REQUEST_LIST_STATE_WAITING) && (!force)) {
-			cy_as_hal_enable_interrupts(imask);
-			return cy_as_remove_request_in_transit;
-		}
-
-		ctxt_p->request_queue_p = node_p->next;
-	} else {
-		tmp_p = ctxt_p->request_queue_p;
-		while (tmp_p != 0 && tmp_p->next != 0 &&
-			tmp_p->next->rqt != req_p)
-			tmp_p = tmp_p->next;
-
-		if (tmp_p == 0 || tmp_p->next == 0) {
-			cy_as_hal_enable_interrupts(imask);
-			return cy_as_remove_request_not_found;
-		}
-
-		node_p = tmp_p->next;
-		tmp_p->next = node_p->next;
-	}
-
-	if (node_p->callback)
-		node_p->callback(dev_p, ctxt_p->number, node_p->rqt,
-			node_p->resp, CY_AS_ERROR_CANCELED);
-
-	state = cy_as_hal_disable_interrupts();
-	cy_as_hal_c_b_free(node_p);
-	cy_as_hal_enable_interrupts(state);
-
-	cy_as_hal_enable_interrupts(imask);
-	return cy_as_remove_request_sucessful;
-}
-
-void
-cy_as_ll_remove_all_requests(cy_as_device *dev_p, cy_as_context *ctxt_p)
-{
-	cy_as_ll_request_list_node *node = ctxt_p->request_queue_p;
-
-	while (node) {
-		if (cy_as_request_get_node_state(ctxt_p->request_queue_p) !=
-			CY_AS_REQUEST_LIST_STATE_RECEIVED)
-			cy_as_ll_remove_request(dev_p, ctxt_p,
-				node->rqt, cy_true);
-		node = node->next;
-	}
-}
-
-static cy_bool
-cy_as_ll_is_in_queue(cy_as_context *ctxt_p, cy_as_ll_request_response *req_p)
-{
-	uint32_t mask;
-	cy_as_ll_request_list_node *node_p;
-
-	mask = cy_as_hal_disable_interrupts();
-	node_p = ctxt_p->request_queue_p;
-	while (node_p) {
-		if (node_p->rqt == req_p) {
-			cy_as_hal_enable_interrupts(mask);
-			return cy_true;
-		}
-		node_p = node_p->next;
-	}
-	cy_as_hal_enable_interrupts(mask);
-	return cy_false;
-}
-
-/*
-* This is the handler for mailbox data when we are trying to send data
-* to the West Bridge firmware.  The firmware may be trying to send us
-* data and we need to queue this data to allow the firmware to move
-* forward and be in a state to receive our request.  Here we just queue
-* the data and it is processed at a later time by the mailbox interrupt
-* handler.
-*/
-void
-cy_as_ll_queue_mailbox_data(cy_as_device *dev_p)
-{
-	cy_as_context *ctxt_p;
-	uint8_t context;
-	uint16_t data[4];
-	int32_t i;
-
-	/* Read the data from mailbox 0 to determine what to do with the data */
-	for (i = 3; i >= 0; i--)
-		data[i] = cy_as_hal_read_register(dev_p->tag,
-			cy_cast_int2U_int16(CY_AS_MEM_P0_MAILBOX0 + i));
-
-	context = cy_as_mbox_get_context(data[0]);
-	if (context >= CY_RQT_CONTEXT_COUNT) {
-		cy_as_hal_print_message("mailbox request/response received "
-			"with invalid context value (%d)\n", context);
-		return;
-	}
-
-	ctxt_p = dev_p->context[context];
-
-	/*
-	* if we have queued too much data, drop future data.
-	*/
-	cy_as_hal_assert(ctxt_p->queue_index * sizeof(uint16_t) +
-		sizeof(data) <= sizeof(ctxt_p->data_queue));
-
-	for (i = 0; i < 4; i++)
-		ctxt_p->data_queue[ctxt_p->queue_index++] = data[i];
-
-	cy_as_hal_assert((ctxt_p->queue_index % 4) == 0);
-	dev_p->ll_queued_data = cy_true;
-}
-
-void
-cy_as_mail_box_process_data(cy_as_device *dev_p, uint16_t *data)
-{
-	cy_as_context *ctxt_p;
-	uint8_t context;
-	uint16_t *len_p;
-	cy_as_ll_request_response *rec_p;
-	uint8_t st;
-	uint16_t src, dest;
-
-	context = cy_as_mbox_get_context(data[0]);
-	if (context >= CY_RQT_CONTEXT_COUNT) {
-		cy_as_hal_print_message("mailbox request/response received "
-		"with invalid context value (%d)\n", context);
-		return;
-	}
-
-	ctxt_p = dev_p->context[context];
-
-	if (cy_as_mbox_is_request(data[0])) {
-		cy_as_hal_assert(ctxt_p->req_p != 0);
-		rec_p = ctxt_p->req_p;
-		len_p = &ctxt_p->request_length;
-
-	} else {
-		if (ctxt_p->request_queue_p == 0 ||
-			cy_as_request_get_node_state(ctxt_p->request_queue_p)
-			!= CY_AS_REQUEST_LIST_STATE_WAITING) {
-			cy_as_hal_print_message("mailbox response received on "
-				"context that was not expecting a response\n");
-			cy_as_hal_print_message("  context: %d\n", context);
-			cy_as_hal_print_message("  contents: 0x%04x 0x%04x "
-				"0x%04x 0x%04x\n",
-				data[0], data[1], data[2], data[3]);
-			if (ctxt_p->request_queue_p != 0)
-				cy_as_hal_print_message("  state: 0x%02x\n",
-					ctxt_p->request_queue_p->state);
-			return;
-		}
-
-		/* Make sure the request has an associated response */
-		cy_as_hal_assert(ctxt_p->request_queue_p->resp != 0);
-
-		rec_p = ctxt_p->request_queue_p->resp;
-		len_p = &ctxt_p->request_queue_p->length;
-	}
-
-	if (rec_p->stored == 0) {
-		/*
-		* this is the first cycle of the response
-		*/
-		cy_as_ll_request_response__set_code(rec_p,
-			cy_as_mbox_get_code(data[0]));
-		cy_as_ll_request_response__set_context(rec_p, context);
-
-		if (cy_as_mbox_is_last(data[0])) {
-			/* This is a single cycle response */
-			*len_p = rec_p->length;
-			st = 1;
-		} else {
-			/* Ensure that enough memory has been
-			 * reserved for the response. */
-			cy_as_hal_assert(rec_p->length >= data[1]);
-			*len_p = (data[1] < rec_p->length) ?
-				data[1] : rec_p->length;
-			st = 2;
-		}
-	} else
-		st = 1;
-
-	/* Trasnfer the data from the mailboxes to the response */
-	while (rec_p->stored < *len_p && st < 4)
-		rec_p->data[rec_p->stored++] = data[st++];
-
-	if (cy_as_mbox_is_last(data[0])) {
-		/* NB: The call-back that is made below can cause the
-		 * addition of more data in this queue, thus causing
-		 * a recursive overflow of the queue. this is prevented
-		 * by removing the request entry that is currently
-		 * being passed up from the data queue. if this is done,
-		 * the queue only needs to be as long as two request
-		 * entries from west bridge.
-		*/
-		if ((ctxt_p->rqt_index > 0) &&
-			(ctxt_p->rqt_index <= ctxt_p->queue_index)) {
-			dest = 0;
-			src  = ctxt_p->rqt_index;
-
-			while (src < ctxt_p->queue_index)
-				ctxt_p->data_queue[dest++] =
-					ctxt_p->data_queue[src++];
-
-			ctxt_p->rqt_index = 0;
-			ctxt_p->queue_index = dest;
-			cy_as_hal_assert((ctxt_p->queue_index % 4) == 0);
-		}
-
-		if (ctxt_p->request_queue_p != 0 && rec_p ==
-			ctxt_p->request_queue_p->resp) {
-			/*
-			* if this is the last cycle of the response, call the
-			* callback and reset for the next response.
-			*/
-			cy_as_ll_request_response *resp_p =
-				ctxt_p->request_queue_p->resp;
-			resp_p->length = ctxt_p->request_queue_p->length;
-			cy_as_request_set_node_state(ctxt_p->request_queue_p,
-				CY_AS_REQUEST_LIST_STATE_RECEIVED);
-
-			cy_as_device_set_in_callback(dev_p);
-			ctxt_p->request_queue_p->callback(dev_p, context,
-				ctxt_p->request_queue_p->rqt,
-				resp_p, CY_AS_ERROR_SUCCESS);
-
-			cy_as_device_clear_in_callback(dev_p);
-
-			cy_as_ll_remove_request_queue_head(dev_p, ctxt_p);
-			cy_as_ll_send_next_request(dev_p, ctxt_p);
-		} else {
-			/* Send the request to the appropriate
-			 * module to handle */
-			cy_as_ll_request_response *request_p = ctxt_p->req_p;
-			ctxt_p->req_p = 0;
-			if (ctxt_p->request_callback) {
-				cy_as_device_set_in_callback(dev_p);
-				ctxt_p->request_callback(dev_p, context,
-					request_p, 0, CY_AS_ERROR_SUCCESS);
-				cy_as_device_clear_in_callback(dev_p);
-			}
-			cy_as_ll_init_request(request_p, 0,
-				context, request_p->length);
-			ctxt_p->req_p = request_p;
-		}
-	}
-}
-
-/*
-* This is the handler for processing queued mailbox data
-*/
-void
-cy_as_mail_box_queued_data_handler(cy_as_device *dev_p)
-{
-	uint16_t i;
-
-	/*
-	 * if more data gets queued in between our entering this call
-	 * and the end of the iteration on all contexts; we should
-	 * continue processing the queued data.
-	 */
-	while (dev_p->ll_queued_data) {
-		dev_p->ll_queued_data = cy_false;
-		for (i = 0; i < CY_RQT_CONTEXT_COUNT; i++) {
-			uint16_t offset;
-			cy_as_context *ctxt_p = dev_p->context[i];
-			cy_as_hal_assert((ctxt_p->queue_index % 4) == 0);
-
-			offset = 0;
-			while (offset < ctxt_p->queue_index) {
-				ctxt_p->rqt_index = offset + 4;
-				cy_as_mail_box_process_data(dev_p,
-					ctxt_p->data_queue + offset);
-				offset = ctxt_p->rqt_index;
-			}
-			ctxt_p->queue_index = 0;
-		}
-	}
-}
-
-/*
-* This is the handler for the mailbox interrupt.  This function reads
-* data from the mailbox registers until a complete request or response
-* is received.  When a complete request is received, the callback
-* associated with requests on that context is called.  When a complete
-* response is recevied, the callback associated with the request that
-* generated the response is called.
-*/
-void
-cy_as_mail_box_interrupt_handler(cy_as_device *dev_p)
-{
-	cy_as_hal_assert(dev_p->sig == CY_AS_DEVICE_HANDLE_SIGNATURE);
-
-	/*
-	* queue the mailbox data to preserve
-	* order for later processing.
-	*/
-	cy_as_ll_queue_mailbox_data(dev_p);
-
-	/*
-	* process what was queued and anything that may be pending
-	*/
-	cy_as_mail_box_queued_data_handler(dev_p);
-}
-
-cy_as_return_status_t
-cy_as_ll_start(cy_as_device *dev_p)
-{
-	uint16_t i;
-
-	if (cy_as_device_is_low_level_running(dev_p))
-		return CY_AS_ERROR_ALREADY_RUNNING;
-
-	dev_p->ll_sending_rqt = cy_false;
-	dev_p->ll_abort_curr_rqt = cy_false;
-
-	for (i = 0; i < CY_RQT_CONTEXT_COUNT; i++) {
-		dev_p->context[i] = (cy_as_context *)
-			cy_as_hal_alloc(sizeof(cy_as_context));
-		if (dev_p->context[i] == 0)
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-
-		dev_p->context[i]->number = (uint8_t)i;
-		dev_p->context[i]->request_callback = 0;
-		dev_p->context[i]->request_queue_p = 0;
-		dev_p->context[i]->last_node_p = 0;
-		dev_p->context[i]->req_p = cy_as_ll_create_request(dev_p,
-			0, (uint8_t)i, max_request_length[i]);
-		dev_p->context[i]->queue_index = 0;
-
-		if (!cy_as_hal_create_sleep_channel
-			(&dev_p->context[i]->channel))
-			return CY_AS_ERROR_CREATE_SLEEP_CHANNEL_FAILED;
-	}
-
-	cy_as_device_set_low_level_running(dev_p);
-	return CY_AS_ERROR_SUCCESS;
-}
-
-/*
-* Shutdown the low level communications module.  This operation will
-* also cancel any queued low level requests.
-*/
-cy_as_return_status_t
-cy_as_ll_stop(cy_as_device *dev_p)
-{
-	uint8_t i;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_context *ctxt_p;
-	uint32_t mask;
-
-	for (i = 0; i < CY_RQT_CONTEXT_COUNT; i++) {
-		ctxt_p = dev_p->context[i];
-		if (!cy_as_hal_destroy_sleep_channel(&ctxt_p->channel))
-			return CY_AS_ERROR_DESTROY_SLEEP_CHANNEL_FAILED;
-
-		/*
-		* now, free any queued requests and assocaited responses
-		*/
-		while (ctxt_p->request_queue_p) {
-			uint32_t state;
-			cy_as_ll_request_list_node *node_p =
-				ctxt_p->request_queue_p;
-
-			/* Mark this pair as in a cancel operation */
-			cy_as_request_set_node_state(node_p,
-				CY_AS_REQUEST_LIST_STATE_CANCELING);
-
-			/* Tell the caller that we are canceling this request */
-			/* NB: The callback is responsible for destroying the
-			 * request and the response.  we cannot count on the
-			 * contents of these two after calling the callback.
-			*/
-			node_p->callback(dev_p, i, node_p->rqt,
-				node_p->resp, CY_AS_ERROR_CANCELED);
-
-			/* Remove the pair from the queue */
-			mask = cy_as_hal_disable_interrupts();
-			ctxt_p->request_queue_p = node_p->next;
-			cy_as_hal_enable_interrupts(mask);
-
-			/* Free the list node */
-			state = cy_as_hal_disable_interrupts();
-			cy_as_hal_c_b_free(node_p);
-			cy_as_hal_enable_interrupts(state);
-		}
-
-		cy_as_ll_destroy_request(dev_p, dev_p->context[i]->req_p);
-		cy_as_hal_free(dev_p->context[i]);
-		dev_p->context[i] = 0;
-
-	}
-	cy_as_device_set_low_level_stopped(dev_p);
-
-	return ret;
-}
-
-void
-cy_as_ll_init_request(cy_as_ll_request_response *req_p,
-	uint16_t code, uint16_t context, uint16_t length)
-{
-	uint16_t totallen = sizeof(cy_as_ll_request_response) +
-		(length - 1) * sizeof(uint16_t);
-
-	cy_as_hal_mem_set(req_p, 0, totallen);
-	req_p->length = length;
-	cy_as_ll_request_response__set_code(req_p, code);
-	cy_as_ll_request_response__set_context(req_p, context);
-	cy_as_ll_request_response__set_request(req_p);
-}
-
-/*
-* Create a new request.
-*/
-cy_as_ll_request_response *
-cy_as_ll_create_request(cy_as_device *dev_p, uint16_t code,
-	uint8_t context, uint16_t length)
-{
-	cy_as_ll_request_response *req_p;
-	uint32_t state;
-	uint16_t totallen = sizeof(cy_as_ll_request_response) +
-		(length - 1) * sizeof(uint16_t);
-
-	(void)dev_p;
-
-	state = cy_as_hal_disable_interrupts();
-	req_p = cy_as_hal_c_b_alloc(totallen);
-	cy_as_hal_enable_interrupts(state);
-	if (req_p)
-		cy_as_ll_init_request(req_p, code, context, length);
-
-	return req_p;
-}
-
-/*
-* Destroy a request.
-*/
-void
-cy_as_ll_destroy_request(cy_as_device *dev_p, cy_as_ll_request_response *req_p)
-{
-	uint32_t state;
-	(void)dev_p;
-	(void)req_p;
-
-	state = cy_as_hal_disable_interrupts();
-	cy_as_hal_c_b_free(req_p);
-	cy_as_hal_enable_interrupts(state);
-
-}
-
-void
-cy_as_ll_init_response(cy_as_ll_request_response *req_p, uint16_t length)
-{
-	uint16_t totallen = sizeof(cy_as_ll_request_response) +
-		(length - 1) * sizeof(uint16_t);
-
-	cy_as_hal_mem_set(req_p, 0, totallen);
-	req_p->length = length;
-	cy_as_ll_request_response__set_response(req_p);
-}
-
-/*
-* Create a new response
-*/
-cy_as_ll_request_response *
-cy_as_ll_create_response(cy_as_device *dev_p, uint16_t length)
-{
-	cy_as_ll_request_response *req_p;
-	uint32_t state;
-	uint16_t totallen = sizeof(cy_as_ll_request_response) +
-		(length - 1) * sizeof(uint16_t);
-
-	(void)dev_p;
-
-	state = cy_as_hal_disable_interrupts();
-	req_p = cy_as_hal_c_b_alloc(totallen);
-	cy_as_hal_enable_interrupts(state);
-	if (req_p)
-		cy_as_ll_init_response(req_p, length);
-
-	return req_p;
-}
-
-/*
-* Destroy the new response
-*/
-void
-cy_as_ll_destroy_response(cy_as_device *dev_p, cy_as_ll_request_response *req_p)
-{
-	uint32_t state;
-	(void)dev_p;
-	(void)req_p;
-
-	state = cy_as_hal_disable_interrupts();
-	cy_as_hal_c_b_free(req_p);
-	cy_as_hal_enable_interrupts(state);
-}
-
-static uint16_t
-cy_as_read_intr_status(
-				   cy_as_device *dev_p)
-{
-	uint32_t mask;
-	cy_bool bloop = cy_true;
-	uint16_t v = 0, last = 0xffff;
-
-	/*
-	* before determining if the mailboxes are ready for more data,
-	* we first check the mailbox interrupt to see if we need to
-	* receive data.  this prevents a dead-lock condition that can
-	* occur when both sides are trying to receive data.
-	*/
-	while (last == last) {
-		/*
-		* disable interrupts to be sure we don't process the mailbox
-		* here and have the interrupt routine try to read this data
-		* as well.
-		*/
-		mask = cy_as_hal_disable_interrupts();
-
-		/*
-		* see if there is data to be read.
-		*/
-		v = cy_as_hal_read_register(dev_p->tag, CY_AS_MEM_P0_INTR_REG);
-		if ((v & CY_AS_MEM_P0_INTR_REG_MBINT) == 0) {
-			cy_as_hal_enable_interrupts(mask);
-			break;
-		}
-
-		/*
-		* queue the mailbox data for later processing.
-		* this allows the firmware to move forward and
-		* service the requst from the P port.
-		*/
-		cy_as_ll_queue_mailbox_data(dev_p);
-
-		/*
-		* enable interrupts again to service mailbox
-		* interrupts appropriately
-		*/
-		cy_as_hal_enable_interrupts(mask);
-	}
-
-	/*
-	* now, all data is received
-	*/
-	last = cy_as_hal_read_register(dev_p->tag,
-		CY_AS_MEM_MCU_MB_STAT) & CY_AS_MEM_P0_MCU_MBNOTRD;
-	while (bloop) {
-		v = cy_as_hal_read_register(dev_p->tag,
-		CY_AS_MEM_MCU_MB_STAT) & CY_AS_MEM_P0_MCU_MBNOTRD;
-		if (v == last)
-			break;
-
-		last = v;
-	}
-
-	return v;
-}
-
-/*
-* Send a single request or response using the mail box register.
-* This function does not deal with the internal queues at all,
-* but only sends the request or response across to the firmware
-*/
-static cy_as_return_status_t
-cy_as_send_one(
-			cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p)
-{
-	int i;
-	uint16_t mb0, v;
-	int32_t loopcount;
-	uint32_t int_stat;
-
-#ifdef _DEBUG
-	if (cy_as_ll_request_response__is_request(req_p)) {
-		switch (cy_as_ll_request_response__get_context(req_p)) {
-		case CY_RQT_GENERAL_RQT_CONTEXT:
-			cy_as_hal_assert(req_p->length * 2 + 2 <
-				CY_CTX_GEN_MAX_DATA_SIZE);
-			break;
-
-		case CY_RQT_RESOURCE_RQT_CONTEXT:
-			cy_as_hal_assert(req_p->length * 2 + 2 <
-				CY_CTX_RES_MAX_DATA_SIZE);
-			break;
-
-		case CY_RQT_STORAGE_RQT_CONTEXT:
-			cy_as_hal_assert(req_p->length * 2 + 2 <
-				CY_CTX_STR_MAX_DATA_SIZE);
-			break;
-
-		case CY_RQT_USB_RQT_CONTEXT:
-			cy_as_hal_assert(req_p->length * 2 + 2 <
-				CY_CTX_USB_MAX_DATA_SIZE);
-			break;
-		}
-	}
-#endif
-
-	/* Write the request to the mail box registers */
-	if (req_p->length > 3) {
-		uint16_t length = req_p->length;
-		int which = 0;
-		int st = 1;
-
-		dev_p->ll_sending_rqt = cy_true;
-		while (which < length) {
-			loopcount = cy_as_low_level_timeout_count;
-			do {
-				v = cy_as_read_intr_status(dev_p);
-
-			} while (v && loopcount-- > 0);
-
-			if (v) {
-				cy_as_hal_print_message(
-					">>>>>> LOW LEVEL TIMEOUT "
-					"%x %x %x %x\n",
-					cy_as_hal_read_register(dev_p->tag,
-						CY_AS_MEM_MCU_MAILBOX0),
-					cy_as_hal_read_register(dev_p->tag,
-						CY_AS_MEM_MCU_MAILBOX1),
-					cy_as_hal_read_register(dev_p->tag,
-						CY_AS_MEM_MCU_MAILBOX2),
-					cy_as_hal_read_register(dev_p->tag,
-						CY_AS_MEM_MCU_MAILBOX3));
-				return CY_AS_ERROR_TIMEOUT;
-			}
-
-			if (dev_p->ll_abort_curr_rqt) {
-				dev_p->ll_sending_rqt = cy_false;
-				dev_p->ll_abort_curr_rqt = cy_false;
-				return CY_AS_ERROR_CANCELED;
-			}
-
-			int_stat = cy_as_hal_disable_interrupts();
-
-			/*
-			 * check again whether the mailbox is free.
-			 * it is possible that an ISR came in and
-			 * wrote into the mailboxes since we last
-			 * checked the status.
-			 */
-			v = cy_as_hal_read_register(dev_p->tag,
-				CY_AS_MEM_MCU_MB_STAT) &
-				CY_AS_MEM_P0_MCU_MBNOTRD;
-			if (v) {
-				/* Go back to the original check since
-				 * the mailbox is not free. */
-				cy_as_hal_enable_interrupts(int_stat);
-				continue;
-			}
-
-			if (which == 0) {
-				cy_as_hal_write_register(dev_p->tag,
-					CY_AS_MEM_MCU_MAILBOX1, length);
-				st = 2;
-			} else {
-				st = 1;
-			}
-
-			while ((which < length) && (st < 4)) {
-				cy_as_hal_write_register(dev_p->tag,
-					cy_cast_int2U_int16
-						(CY_AS_MEM_MCU_MAILBOX0 + st),
-						req_p->data[which++]);
-				st++;
-			}
-
-			mb0 = req_p->box0;
-			if (which == length) {
-				dev_p->ll_sending_rqt = cy_false;
-				mb0 |= CY_AS_REQUEST_RESPONSE_LAST_MASK;
-			}
-
-			if (dev_p->ll_abort_curr_rqt) {
-				dev_p->ll_sending_rqt = cy_false;
-				dev_p->ll_abort_curr_rqt = cy_false;
-				cy_as_hal_enable_interrupts(int_stat);
-				return CY_AS_ERROR_CANCELED;
-			}
-
-			cy_as_hal_write_register(dev_p->tag,
-				CY_AS_MEM_MCU_MAILBOX0, mb0);
-
-			/* Wait for the MBOX interrupt to be high */
-			cy_as_hal_sleep150();
-			cy_as_hal_enable_interrupts(int_stat);
-		}
-	} else {
-check_mailbox_availability:
-		/*
-		* wait for the mailbox registers to become available. this
-		* should be a very quick wait as the firmware is designed
-		* to accept requests at interrupt time and queue them for
-		* future processing.
-		*/
-		loopcount = cy_as_low_level_timeout_count;
-		do {
-			v = cy_as_read_intr_status(dev_p);
-
-		} while (v && loopcount-- > 0);
-
-		if (v) {
-			cy_as_hal_print_message(
-				">>>>>> LOW LEVEL TIMEOUT %x %x %x %x\n",
-				cy_as_hal_read_register(dev_p->tag,
-					CY_AS_MEM_MCU_MAILBOX0),
-				cy_as_hal_read_register(dev_p->tag,
-					CY_AS_MEM_MCU_MAILBOX1),
-				cy_as_hal_read_register(dev_p->tag,
-					CY_AS_MEM_MCU_MAILBOX2),
-				cy_as_hal_read_register(dev_p->tag,
-					CY_AS_MEM_MCU_MAILBOX3));
-			return CY_AS_ERROR_TIMEOUT;
-		}
-
-		int_stat = cy_as_hal_disable_interrupts();
-
-		/*
-		 * check again whether the mailbox is free. it is
-		 * possible that an ISR came in and wrote into the
-		 * mailboxes since we last checked the status.
-		 */
-		v = cy_as_hal_read_register(dev_p->tag, CY_AS_MEM_MCU_MB_STAT) &
-			CY_AS_MEM_P0_MCU_MBNOTRD;
-		if (v) {
-			/* Go back to the original check
-			 * since the mailbox is not free. */
-			cy_as_hal_enable_interrupts(int_stat);
-			goto check_mailbox_availability;
-		}
-
-		/* Write the data associated with the request
-		 * into the mbox registers 1 - 3 */
-		v = 0;
-		for (i = req_p->length - 1; i >= 0; i--)
-			cy_as_hal_write_register(dev_p->tag,
-				cy_cast_int2U_int16(CY_AS_MEM_MCU_MAILBOX1 + i),
-				req_p->data[i]);
-
-		/* Write the mbox register 0 to trigger the interrupt */
-		cy_as_hal_write_register(dev_p->tag, CY_AS_MEM_MCU_MAILBOX0,
-			req_p->box0 | CY_AS_REQUEST_RESPONSE_LAST_MASK);
-
-		cy_as_hal_sleep150();
-		cy_as_hal_enable_interrupts(int_stat);
-	}
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-/*
-* This function queues a single request to be sent to the firmware.
-*/
-extern cy_as_return_status_t
-cy_as_ll_send_request(
-				  cy_as_device *dev_p,
-				  /* The request to send */
-				  cy_as_ll_request_response *req,
-				  /* Storage for a reply, must be sure
-				   * it is of sufficient size */
-				  cy_as_ll_request_response *resp,
-				  /* If true, this is a synchronous request */
-				  cy_bool sync,
-				  /* Callback to call when reply is received */
-				  cy_as_response_callback cb
-)
-{
-	cy_as_context *ctxt_p;
-	uint16_t box0 = req->box0;
-	uint8_t context;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_ll_request_list_node *node_p;
-	uint32_t mask, state;
-
-	cy_as_hal_assert(dev_p->sig == CY_AS_DEVICE_HANDLE_SIGNATURE);
-
-	context = cy_as_mbox_get_context(box0);
-	cy_as_hal_assert(context < CY_RQT_CONTEXT_COUNT);
-	ctxt_p = dev_p->context[context];
-
-	/* Allocate the list node */
-	state = cy_as_hal_disable_interrupts();
-	node_p = cy_as_hal_c_b_alloc(sizeof(cy_as_ll_request_list_node));
-	cy_as_hal_enable_interrupts(state);
-
-	if (node_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* Initialize the list node */
-	node_p->callback = cb;
-	node_p->length = 0;
-	node_p->next = 0;
-	node_p->resp = resp;
-	node_p->rqt = req;
-	node_p->state = CY_AS_REQUEST_LIST_STATE_QUEUED;
-	if (sync)
-		cy_as_request_node_set_sync(node_p);
-
-	/* Put the request into the queue */
-	mask = cy_as_hal_disable_interrupts();
-	if (ctxt_p->request_queue_p == 0) {
-		/* Empty queue */
-		ctxt_p->request_queue_p = node_p;
-		ctxt_p->last_node_p = node_p;
-	} else {
-		ctxt_p->last_node_p->next = node_p;
-		ctxt_p->last_node_p = node_p;
-	}
-	cy_as_hal_enable_interrupts(mask);
-	cy_as_ll_send_next_request(dev_p, ctxt_p);
-
-	if (!cy_as_device_is_in_callback(dev_p)) {
-		mask = cy_as_hal_disable_interrupts();
-		cy_as_mail_box_queued_data_handler(dev_p);
-		cy_as_hal_enable_interrupts(mask);
-	}
-
-	return ret;
-}
-
-static void
-cy_as_ll_send_callback(
-				   cy_as_device *dev_p,
-				   uint8_t context,
-				   cy_as_ll_request_response *rqt,
-				   cy_as_ll_request_response *resp,
-				   cy_as_return_status_t ret)
-{
-	(void)rqt;
-	(void)resp;
-	(void)ret;
-
-
-	cy_as_hal_assert(dev_p->sig == CY_AS_DEVICE_HANDLE_SIGNATURE);
-
-	/*
-	* storage the state to return to the caller
-	*/
-	dev_p->ll_error = ret;
-
-	/*
-	* now wake the caller
-	*/
-	cy_as_hal_wake(&dev_p->context[context]->channel);
-}
-
-cy_as_return_status_t
-cy_as_ll_send_request_wait_reply(
-		cy_as_device *dev_p,
-		/* The request to send */
-		cy_as_ll_request_response *req,
-		/* Storage for a reply, must be
-		 * sure it is of sufficient size */
-		cy_as_ll_request_response *resp
-		)
-{
-	cy_as_return_status_t ret;
-	uint8_t context;
-	/* Larger 8 sec time-out to handle the init
-	 * delay for slower storage devices in USB FS. */
-	uint32_t loopcount = 800;
-	cy_as_context *ctxt_p;
-
-	/* Get the context for the request */
-	context = cy_as_ll_request_response__get_context(req);
-	cy_as_hal_assert(context < CY_RQT_CONTEXT_COUNT);
-	ctxt_p = dev_p->context[context];
-
-	ret = cy_as_ll_send_request(dev_p, req, resp,
-		cy_true, cy_as_ll_send_callback);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	while (loopcount-- > 0) {
-		/*
-		* sleep while we wait on the response.  receiving the reply will
-		* wake this thread.  we will wait, at most 2 seconds (10 ms*200
-		* tries) before we timeout.  note if the reply arrives, we will
-		* not sleep the entire 10 ms, just til the reply arrives.
-		*/
-		cy_as_hal_sleep_on(&ctxt_p->channel, 10);
-
-		/*
-		* if the request has left the queue, it means the request has
-		* been sent and the reply has been received.  this means we can
-		* return to the caller and be sure the reply has been received.
-		*/
-		if (!cy_as_ll_is_in_queue(ctxt_p, req))
-			return dev_p->ll_error;
-	}
-
-	/* Remove the QueueListNode for this request. */
-	cy_as_ll_remove_request(dev_p, ctxt_p, req, cy_true);
-
-	return CY_AS_ERROR_TIMEOUT;
-}
-
-cy_as_return_status_t
-cy_as_ll_register_request_callback(
-			cy_as_device *dev_p,
-			uint8_t context,
-			cy_as_response_callback cb)
-{
-	cy_as_context *ctxt_p;
-	cy_as_hal_assert(context < CY_RQT_CONTEXT_COUNT);
-	ctxt_p = dev_p->context[context];
-
-	ctxt_p->request_callback = cb;
-	return CY_AS_ERROR_SUCCESS;
-}
-
-void
-cy_as_ll_request_response__pack(
-			cy_as_ll_request_response *req_p,
-			uint32_t offset,
-			uint32_t length,
-			void *data_p)
-{
-	uint16_t dt;
-	uint8_t *dp = (uint8_t *)data_p;
-
-	while (length > 1) {
-		dt = ((*dp++) << 8);
-		dt |= (*dp++);
-		cy_as_ll_request_response__set_word(req_p, offset, dt);
-		offset++;
-		length -= 2;
-	}
-
-	if (length == 1) {
-		dt = (*dp << 8);
-		cy_as_ll_request_response__set_word(req_p, offset, dt);
-	}
-}
-
-void
-cy_as_ll_request_response__unpack(
-			cy_as_ll_request_response *req_p,
-			uint32_t offset,
-			uint32_t length,
-			void *data_p)
-{
-	uint8_t *dp = (uint8_t *)data_p;
-
-	while (length-- > 0) {
-		uint16_t val = cy_as_ll_request_response__get_word
-			(req_p, offset++);
-		*dp++ = (uint8_t)((val >> 8) & 0xff);
-
-		if (length) {
-			length--;
-			*dp++ = (uint8_t)(val & 0xff);
-		}
-	}
-}
-
-extern cy_as_return_status_t
-cy_as_ll_send_status_response(
-						 cy_as_device *dev_p,
-						 uint8_t context,
-						 uint16_t code,
-						 uint8_t clear_storage)
-{
-	cy_as_return_status_t ret;
-	cy_as_ll_request_response resp;
-	cy_as_ll_request_response *resp_p = &resp;
-
-	cy_as_hal_mem_set(resp_p, 0, sizeof(resp));
-	resp_p->length = 1;
-	cy_as_ll_request_response__set_response(resp_p);
-	cy_as_ll_request_response__set_context(resp_p, context);
-
-	if (clear_storage)
-		cy_as_ll_request_response__set_clear_storage_flag(resp_p);
-
-	cy_as_ll_request_response__set_code(resp_p, CY_RESP_SUCCESS_FAILURE);
-	cy_as_ll_request_response__set_word(resp_p, 0, code);
-
-	ret = cy_as_send_one(dev_p, resp_p);
-
-	return ret;
-}
-
-extern cy_as_return_status_t
-cy_as_ll_send_data_response(
-					   cy_as_device *dev_p,
-					   uint8_t context,
-					   uint16_t code,
-					   uint16_t length,
-					   void *data)
-{
-	cy_as_ll_request_response *resp_p;
-	uint16_t wlen;
-	uint8_t respbuf[256];
-
-	if (length > 192)
-		return CY_AS_ERROR_INVALID_SIZE;
-
-	/* Word length for bytes */
-	wlen = length / 2;
-
-	/* If byte length odd, add one more */
-	if (length % 2)
-		wlen++;
-
-	/* One for the length of field */
-	wlen++;
-
-	resp_p = (cy_as_ll_request_response *)respbuf;
-	cy_as_hal_mem_set(resp_p, 0, sizeof(respbuf));
-	resp_p->length = wlen;
-	cy_as_ll_request_response__set_context(resp_p, context);
-	cy_as_ll_request_response__set_code(resp_p, code);
-
-	cy_as_ll_request_response__set_word(resp_p, 0, length);
-	cy_as_ll_request_response__pack(resp_p, 1, length, data);
-
-	return cy_as_send_one(dev_p, resp_p);
-}
-
-static cy_bool
-cy_as_ll_is_e_p_transfer_related_request(cy_as_ll_request_response *rqt_p,
-	cy_as_end_point_number_t ep)
-{
-	uint16_t v;
-	uint8_t  type = cy_as_ll_request_response__get_code(rqt_p);
-
-	if (cy_as_ll_request_response__get_context(rqt_p) !=
-		CY_RQT_USB_RQT_CONTEXT)
-		return cy_false;
-
-	/*
-	 * when cancelling outstanding EP0 data transfers, any pending
-	 * setup ACK requests also need to be cancelled.
-	 */
-	if ((ep == 0) && (type == CY_RQT_ACK_SETUP_PACKET))
-		return cy_true;
-
-	if (type != CY_RQT_USB_EP_DATA)
-		return cy_false;
-
-	v = cy_as_ll_request_response__get_word(rqt_p, 0);
-	if ((cy_as_end_point_number_t)((v >> 13) & 1) != ep)
-		return cy_false;
-
-	return cy_true;
-}
-
-cy_as_return_status_t
-cy_as_ll_remove_ep_data_requests(cy_as_device *dev_p,
-	cy_as_end_point_number_t ep)
-{
-	cy_as_context *ctxt_p;
-	cy_as_ll_request_list_node *node_p;
-	uint32_t imask;
-
-	/*
-	* first, remove any queued requests
-	*/
-	ctxt_p = dev_p->context[CY_RQT_USB_RQT_CONTEXT];
-	if (ctxt_p) {
-		for (node_p = ctxt_p->request_queue_p; node_p;
-			node_p = node_p->next) {
-			if (cy_as_ll_is_e_p_transfer_related_request
-			(node_p->rqt, ep)) {
-				cy_as_ll_remove_request(dev_p, ctxt_p,
-					node_p->rqt, cy_false);
-				break;
-			}
-		}
-
-		/*
-		* now, deal with any request that may be in transit
-		*/
-		imask = cy_as_hal_disable_interrupts();
-
-		if (ctxt_p->request_queue_p != 0 &&
-			cy_as_ll_is_e_p_transfer_related_request
-			(ctxt_p->request_queue_p->rqt, ep) &&
-			cy_as_request_get_node_state(ctxt_p->request_queue_p) ==
-			CY_AS_REQUEST_LIST_STATE_WAITING) {
-			cy_as_hal_print_message("need to remove an in-transit "
-				"request to antioch\n");
-
-			/*
-			* if the request has not been fully sent to west bridge
-			* yet, abort sending. otherwise, terminate the request
-			* with a CANCELED status. firmware will already have
-			* terminated this transfer.
-			*/
-			if (dev_p->ll_sending_rqt)
-				dev_p->ll_abort_curr_rqt = cy_true;
-			else {
-				uint32_t state;
-
-				node_p = ctxt_p->request_queue_p;
-				if (node_p->callback)
-					node_p->callback(dev_p, ctxt_p->number,
-						node_p->rqt, node_p->resp,
-						CY_AS_ERROR_CANCELED);
-
-				ctxt_p->request_queue_p = node_p->next;
-				state = cy_as_hal_disable_interrupts();
-				cy_as_hal_c_b_free(node_p);
-				cy_as_hal_enable_interrupts(state);
-			}
-		}
-
-		cy_as_hal_enable_interrupts(imask);
-	}
-
-	return CY_AS_ERROR_SUCCESS;
-}
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasmisc.c b/drivers/staging/westbridge/astoria/api/src/cyasmisc.c
deleted file mode 100644
index 4564fc11df22..000000000000
--- a/drivers/staging/westbridge/astoria/api/src/cyasmisc.c
+++ /dev/null
@@ -1,3488 +0,0 @@
-/* Cypress West Bridge API source file (cyasmisc.c)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#include "../../include/linux/westbridge/cyashal.h"
-#include "../../include/linux/westbridge/cyasmisc.h"
-#include "../../include/linux/westbridge/cyasdma.h"
-#include "../../include/linux/westbridge/cyasintr.h"
-#include "../../include/linux/westbridge/cyaserr.h"
-#include "../../include/linux/westbridge/cyasregs.h"
-#include "../../include/linux/westbridge/cyaslowlevel.h"
-#include "../../include/linux/westbridge/cyasprotocol.h"
-
-/*
-* The device list, the only global in the API
-*/
-static cy_as_device *g_device_list;
-
-/*
- * The current debug level
- */
-static uint8_t debug_level;
-
-/*
- * This function sets the debug level for the API
- *
- */
-void
-cy_as_misc_set_log_level(uint8_t level)
-{
-	debug_level = level;
-}
-
-#ifdef CY_AS_LOG_SUPPORT
-
-/*
- * This function is a low level logger for the API.
- */
-void
-cy_as_log_debug_message(int level, const char *str)
-{
-	if (level <= debug_level)
-		cy_as_hal_print_message("log %d: %s\n", level, str);
-}
-
-#endif
-
-#define cy_as_check_device_ready(dev_p)			\
-{\
-	if (!(dev_p) || ((dev_p)->sig !=			\
-		CY_AS_DEVICE_HANDLE_SIGNATURE))			\
-		return CY_AS_ERROR_INVALID_HANDLE;		\
-\
-	if (!cy_as_device_is_configured(dev_p))		\
-		return CY_AS_ERROR_NOT_CONFIGURED;		\
-\
-	if (!cy_as_device_is_firmware_loaded(dev_p))\
-		return CY_AS_ERROR_NO_FIRMWARE;		\
-}
-
-/* Find an West Bridge device based on a TAG */
-cy_as_device *
-cy_as_device_find_from_tag(cy_as_hal_device_tag tag)
-{
-	cy_as_device *dev_p;
-
-	for (dev_p = g_device_list; dev_p != 0; dev_p = dev_p->next_p) {
-		if (dev_p->tag == tag)
-			return dev_p;
-	}
-
-	return 0;
-}
-
-/* Map a pre-V1.2 media type to the V1.2+ bus number */
-static void
-cy_as_bus_from_media_type(cy_as_media_type type,
-						cy_as_bus_number_t *bus)
-{
-	if (type == cy_as_media_nand)
-		*bus = 0;
-	else
-		*bus = 1;
-}
-
-static cy_as_return_status_t
-my_handle_response_no_data(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_SUCCESS_FAILURE)
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-	else
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-/*
-* Create a new West Bridge device
-*/
-cy_as_return_status_t
-cy_as_misc_create_device(cy_as_device_handle *handle_p,
-	cy_as_hal_device_tag tag)
-{
-	cy_as_device *dev_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	cy_as_log_debug_message(6, "cy_as_misc_create_device called");
-
-	dev_p = (cy_as_device *)cy_as_hal_alloc(sizeof(cy_as_device));
-	if (dev_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	cy_as_hal_mem_set(dev_p, 0, sizeof(cy_as_device));
-
-	/*
-	 * dynamically allocating this buffer to ensure that it is
-	 * word aligned.
-	 */
-	dev_p->usb_ep_data = (uint8_t *)cy_as_hal_alloc(64 * sizeof(uint8_t));
-	if (dev_p->usb_ep_data == 0) {
-		cy_as_hal_free(dev_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	dev_p->sig = CY_AS_DEVICE_HANDLE_SIGNATURE;
-	dev_p->tag = tag;
-	dev_p->usb_max_tx_size = 0x40;
-
-	dev_p->storage_write_endpoint = CY_AS_P2S_WRITE_ENDPOINT;
-	dev_p->storage_read_endpoint = CY_AS_P2S_READ_ENDPOINT;
-
-	dev_p->func_cbs_misc = cy_as_create_c_b_queue(CYAS_FUNC_CB);
-	if (dev_p->func_cbs_misc == 0)
-		goto destroy;
-
-	dev_p->func_cbs_res = cy_as_create_c_b_queue(CYAS_FUNC_CB);
-	if (dev_p->func_cbs_res == 0)
-		goto destroy;
-
-	dev_p->func_cbs_stor = cy_as_create_c_b_queue(CYAS_FUNC_CB);
-	if (dev_p->func_cbs_stor == 0)
-		goto destroy;
-
-	dev_p->func_cbs_usb = cy_as_create_c_b_queue(CYAS_FUNC_CB);
-	if (dev_p->func_cbs_usb == 0)
-		goto destroy;
-
-	dev_p->func_cbs_mtp = cy_as_create_c_b_queue(CYAS_FUNC_CB);
-	if (dev_p->func_cbs_mtp == 0)
-			goto destroy;
-
-	/*
-	 * allocate memory for the DMA module here. it is then marked idle, and
-	 * will be activated when cy_as_misc_configure_device is called.
-	 */
-	ret = cy_as_dma_start(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	cy_as_device_set_dma_stopped(dev_p);
-
-	/*
-	 * allocate memory for the low level module here. this module is also
-	 * activated only when cy_as_misc_configure_device is called.
-	 */
-	ret = cy_as_ll_start(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	cy_as_device_set_low_level_stopped(dev_p);
-
-	dev_p->next_p = g_device_list;
-	g_device_list = dev_p;
-
-	*handle_p = dev_p;
-	cy_as_hal_init_dev_registers(tag, cy_false);
-	return CY_AS_ERROR_SUCCESS;
-
-destroy:
-	/* Free any queues that were successfully allocated. */
-	if (dev_p->func_cbs_misc)
-		cy_as_destroy_c_b_queue(dev_p->func_cbs_misc);
-
-	if (dev_p->func_cbs_res)
-		cy_as_destroy_c_b_queue(dev_p->func_cbs_res);
-
-	if (dev_p->func_cbs_stor)
-		cy_as_destroy_c_b_queue(dev_p->func_cbs_stor);
-
-	if (dev_p->func_cbs_usb)
-		cy_as_destroy_c_b_queue(dev_p->func_cbs_usb);
-
-	if (dev_p->func_cbs_mtp)
-		cy_as_destroy_c_b_queue(dev_p->func_cbs_mtp);
-
-	cy_as_hal_free(dev_p->usb_ep_data);
-	cy_as_hal_free(dev_p);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-	else
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-}
-
-/*
-* Destroy an existing West Bridge device
-*/
-cy_as_return_status_t
-cy_as_misc_destroy_device(cy_as_device_handle handle)
-{
-	cy_as_return_status_t ret;
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_misc_destroy_device called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	/*
-	* if the USB stack is still running,
-	* it must be stopped first
-	*/
-	if (dev_p->usb_count > 0)
-		return CY_AS_ERROR_STILL_RUNNING;
-
-	/*
-	* if the STORAGE stack is still running,
-	* it must be stopped first
-	*/
-	if (dev_p->storage_count > 0)
-		return CY_AS_ERROR_STILL_RUNNING;
-
-	if (cy_as_device_is_intr_running(dev_p))
-		ret = cy_as_intr_stop(dev_p);
-
-	ret = cy_as_ll_stop(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_intr_start(dev_p, dev_p->use_int_drq);
-		return ret;
-	}
-
-	ret = cy_as_dma_stop(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_intr_start(dev_p, dev_p->use_int_drq);
-		return ret;
-	}
-
-	/* Reset the West Bridge device. */
-	cy_as_hal_write_register(dev_p->tag, CY_AS_MEM_RST_CTRL_REG,
-		CY_AS_MEM_RST_CTRL_REG_HARD);
-
-	/*
-	* remove the device from the device list
-	*/
-	if (g_device_list == dev_p) {
-		g_device_list = dev_p->next_p;
-	} else {
-		cy_as_device *tmp_p = g_device_list;
-		while (tmp_p && tmp_p->next_p != dev_p)
-			tmp_p = tmp_p->next_p;
-
-		cy_as_hal_assert(tmp_p != 0);
-		tmp_p->next_p = dev_p->next_p;
-	}
-
-	/*
-	* reset the signature so this will not be detected
-	* as a valid handle
-	*/
-	dev_p->sig = 0;
-
-	cy_as_destroy_c_b_queue(dev_p->func_cbs_misc);
-	cy_as_destroy_c_b_queue(dev_p->func_cbs_res);
-	cy_as_destroy_c_b_queue(dev_p->func_cbs_stor);
-	cy_as_destroy_c_b_queue(dev_p->func_cbs_usb);
-	cy_as_destroy_c_b_queue(dev_p->func_cbs_mtp);
-
-	/*
-	* free the memory associated with the device
-	*/
-	cy_as_hal_free(dev_p->usb_ep_data);
-	cy_as_hal_free(dev_p);
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-/*
-* Determine the endian mode for the processor we are
-* running on, then set the endian mode register
-*/
-static void
-cy_as_setup_endian_mode(cy_as_device *dev_p)
-{
-	/*
-	* In general, we always set west bridge intothe little
-	* endian mode. this causes the data on bit 0 internally
-	* to come out on data line 0 externally and it is generally
-	* what we want regardless of the endian mode of the
-	* processor.  this capability in west bridge should be
-	* labeled as a "SWAP" capability and can be used to swap the
-	* bytes of data in and out of west bridge.  this is
-	* useful if there is DMA hardware that requires this for some
-	* reason I cannot imagine at this time.  basically if the
-	* wires are connected correctly, we should never need to
-	* change the endian-ness of west bridge.
-	*/
-	cy_as_hal_write_register(dev_p->tag, CY_AS_MEM_P0_ENDIAN,
-		CY_AS_LITTLE_ENDIAN);
-}
-
-/*
-* Query the West Bridge device and determine if we are an standby mode
-*/
-cy_as_return_status_t
-cy_as_misc_in_standby(cy_as_device_handle handle, cy_bool *standby)
-{
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_misc_in_standby called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (cy_as_device_is_pin_standby(dev_p) ||
-		cy_as_device_is_register_standby(dev_p)) {
-		*standby = cy_true;
-	} else
-		*standby = cy_false;
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-static void
-cy_as_misc_func_callback(cy_as_device *dev_p,
-						uint8_t context,
-						cy_as_ll_request_response *rqt,
-						cy_as_ll_request_response *resp,
-						cy_as_return_status_t ret);
-
-
-static void
-my_misc_callback(cy_as_device *dev_p, uint8_t context,
-		cy_as_ll_request_response *req_p,
-		cy_as_ll_request_response *resp_p,
-		cy_as_return_status_t ret)
-{
-	(void)resp_p;
-	(void)context;
-	(void)ret;
-
-	switch (cy_as_ll_request_response__get_code(req_p)) {
-	case CY_RQT_INITIALIZATION_COMPLETE:
-		{
-			uint16_t v;
-
-			cy_as_ll_send_status_response(dev_p,
-				CY_RQT_GENERAL_RQT_CONTEXT,
-				CY_AS_ERROR_SUCCESS, 0);
-			cy_as_device_set_firmware_loaded(dev_p);
-
-			if (cy_as_device_is_waking(dev_p)) {
-				/*
-				 * this is a callback from a
-				 * cy_as_misc_leave_standby()
-				 * request. in this case we call
-				 * the standby callback and clear
-				 * the waking state.
-				 */
-				if (dev_p->misc_event_cb)
-					dev_p->misc_event_cb(
-					 (cy_as_device_handle)dev_p,
-					 cy_as_event_misc_awake, 0);
-				cy_as_device_clear_waking(dev_p);
-			} else {
-				v = cy_as_ll_request_response__get_word
-					(req_p, 3);
-
-				/*
-				 * store the media supported on
-				 * each of the device buses.
-				 */
-				dev_p->media_supported[0] =
-					(uint8_t)(v & 0xFF);
-				dev_p->media_supported[1] =
-					(uint8_t)((v >> 8) & 0xFF);
-
-				v = cy_as_ll_request_response__get_word
-					(req_p, 4);
-
-				dev_p->is_mtp_firmware	=
-					(cy_bool)((v >> 8) & 0xFF);
-
-				if (dev_p->misc_event_cb)
-					dev_p->misc_event_cb(
-					 (cy_as_device_handle)dev_p,
-					 cy_as_event_misc_initialized, 0);
-			}
-
-			v = cy_as_hal_read_register(dev_p->tag,
-				CY_AS_MEM_P0_VM_SET);
-
-				if (v & CY_AS_MEM_P0_VM_SET_CFGMODE)
-					cy_as_hal_print_message(
-					"initialization message "
-					"received, but config bit "
-					"still set\n");
-
-				v = cy_as_hal_read_register(dev_p->tag,
-					CY_AS_MEM_RST_CTRL_REG);
-				if ((v & CY_AS_MEM_RST_RSTCMPT) == 0)
-					cy_as_hal_print_message(
-					"initialization message "
-					"received, but reset complete "
-					"bit still not set\n");
-			}
-			break;
-
-	case CY_RQT_OUT_OF_SUSPEND:
-		cy_as_ll_send_status_response(dev_p, CY_RQT_GENERAL_RQT_CONTEXT,
-			CY_AS_ERROR_SUCCESS, 0);
-			cy_as_device_clear_suspend_mode(dev_p);
-
-		/*
-		 * if the wakeup was caused by an async cy_as_misc_leave_suspend
-		 * call, we have to call the corresponding callback.
-		 */
-		if (dev_p->func_cbs_misc->count > 0) {
-			cy_as_func_c_b_node *node = (cy_as_func_c_b_node *)
-					dev_p->func_cbs_misc->head_p;
-			cy_as_hal_assert(node);
-
-			if (cy_as_funct_c_b_type_get_type(node->data_type) ==
-				CY_FUNCT_CB_MISC_LEAVESUSPEND) {
-				cy_as_hal_assert(node->cb_p != 0);
-
-				node->cb_p((cy_as_device_handle)dev_p,
-					CY_AS_ERROR_SUCCESS, node->client_data,
-					CY_FUNCT_CB_MISC_LEAVESUSPEND, 0);
-				cy_as_remove_c_b_node(dev_p->func_cbs_misc);
-			}
-		}
-
-		if (dev_p->misc_event_cb)
-			dev_p->misc_event_cb((cy_as_device_handle)dev_p,
-				cy_as_event_misc_wakeup, 0);
-			break;
-
-	case CY_RQT_DEBUG_MESSAGE:
-		if ((req_p->data[0] == 0) && (req_p->data[1] == 0) &&
-			(req_p->data[2] == 0)) {
-			if (dev_p->misc_event_cb)
-				dev_p->misc_event_cb((cy_as_device_handle)dev_p,
-					cy_as_event_misc_heart_beat, 0);
-		} else {
-			cy_as_hal_print_message(
-				"**** debug message: %02x "
-				"%02x %02x %02x %02x %02x\n",
-				req_p->data[0] & 0xff,
-				(req_p->data[0] >> 8) & 0xff,
-				req_p->data[1] & 0xff,
-				(req_p->data[1] >> 8) & 0xff,
-				req_p->data[2] & 0xff,
-				(req_p->data[2] >> 8) & 0xff);
-		}
-		break;
-
-	case CY_RQT_WB_DEVICE_MISMATCH:
-		{
-			if (dev_p->misc_event_cb)
-				dev_p->misc_event_cb((cy_as_device_handle)dev_p,
-					cy_as_event_misc_device_mismatch, 0);
-		}
-		break;
-
-	case CY_RQT_BOOTLOAD_NO_FIRMWARE:
-		{
-			/* TODO Handle case when firmware is
-			 * not found during bootloading. */
-			cy_as_hal_print_message("no firmware image found "
-			"during bootload. device not started\n");
-		}
-		break;
-
-	default:
-		cy_as_hal_assert(0);
-	}
-}
-
-static cy_bool
-is_valid_silicon_id(uint16_t v)
-{
-	cy_bool idok = cy_false;
-
-	/*
-	* remove the revision number from the ID value
-	*/
-	v = v & CY_AS_MEM_CM_WB_CFG_ID_HDID_MASK;
-
-	/*
-	* if this is west bridge, then we are OK.
-	*/
-	if (v == CY_AS_MEM_CM_WB_CFG_ID_HDID_ANTIOCH_VALUE ||
-		v == CY_AS_MEM_CM_WB_CFG_ID_HDID_ASTORIA_FPGA_VALUE ||
-		v == CY_AS_MEM_CM_WB_CFG_ID_HDID_ASTORIA_VALUE)
-		idok = cy_true;
-
-	return idok;
-}
-
-/*
-* Configure the West Bridge device hardware
-*/
-cy_as_return_status_t
-cy_as_misc_configure_device(cy_as_device_handle handle,
-	cy_as_device_config *config_p)
-{
-	cy_as_return_status_t ret;
-	cy_bool standby;
-	cy_as_device *dev_p;
-	uint16_t v;
-	uint16_t fw_present;
-	cy_as_log_debug_message(6, "cy_as_misc_configure_device called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	/* Setup big endian vs little endian */
-	cy_as_setup_endian_mode(dev_p);
-
-	/* Now, confirm that we can talk to the West Bridge device */
-	dev_p->silicon_id = cy_as_hal_read_register(dev_p->tag,
-		CY_AS_MEM_CM_WB_CFG_ID);
-	fw_present = cy_as_hal_read_register(dev_p->tag,
-		CY_AS_MEM_RST_CTRL_REG);
-	if (!(fw_present & CY_AS_MEM_RST_RSTCMPT)) {
-		if (!is_valid_silicon_id(dev_p->silicon_id))
-			return CY_AS_ERROR_NO_ANTIOCH;
-	}
-	/* Check for standby mode */
-	ret = cy_as_misc_in_standby(handle, &standby);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-	if (ret)
-		return CY_AS_ERROR_IN_STANDBY;
-
-	/* Setup P-port interface mode (CRAM / SRAM). */
-	if (cy_as_device_is_astoria_dev(dev_p)) {
-		if (config_p->srammode)
-			v = CY_AS_MEM_P0_VM_SET_VMTYPE_SRAM;
-		else
-			v = CY_AS_MEM_P0_VM_SET_VMTYPE_RAM;
-	} else
-		v = CY_AS_MEM_P0_VM_SET_VMTYPE_RAM;
-
-	/* Setup synchronous versus asynchronous mode */
-	if (config_p->sync)
-		v |= CY_AS_MEM_P0_VM_SET_IFMODE;
-	if (config_p->dackmode == cy_as_device_dack_ack)
-		v |= CY_AS_MEM_P0_VM_SET_DACKEOB;
-	if (config_p->drqpol)
-		v |= CY_AS_MEM_P0_VM_SET_DRQPOL;
-	if (config_p->dackpol)
-		v |= CY_AS_MEM_P0_VM_SET_DACKPOL;
-	cy_as_hal_write_register(dev_p->tag, CY_AS_MEM_P0_VM_SET, v);
-
-	if (config_p->crystal)
-		cy_as_device_set_crystal(dev_p);
-	else
-		cy_as_device_set_external_clock(dev_p);
-
-	/* Register a callback to handle MISC requests from the firmware */
-	cy_as_ll_register_request_callback(dev_p,
-		CY_RQT_GENERAL_RQT_CONTEXT, my_misc_callback);
-
-	/* Now mark the DMA and low level modules as active. */
-	cy_as_device_set_dma_running(dev_p);
-	cy_as_device_set_low_level_running(dev_p);
-
-	/* Now, initialize the interrupt module */
-	dev_p->use_int_drq = config_p->dmaintr;
-	ret = cy_as_intr_start(dev_p, config_p->dmaintr);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/* Mark the interface as initialized */
-	cy_as_device_set_configured(dev_p);
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-static void
-my_dma_callback(cy_as_device *dev_p,
-			  cy_as_end_point_number_t ep,
-			  void *mem_p,
-			  uint32_t			  size,
-			  cy_as_return_status_t	ret
-			 )
-{
-	cy_as_dma_end_point *ep_p;
-
-	(void)size;
-
-	/* Get the endpoint pointer based on the endpoint number */
-	ep_p = CY_AS_NUM_EP(dev_p, ep);
-
-	/* Check the queue to see if is drained */
-	if (ep_p->queue_p == 0) {
-		cy_as_func_c_b_node *node =
-			(cy_as_func_c_b_node *)dev_p->func_cbs_misc->head_p;
-
-		cy_as_hal_assert(node);
-
-		if (ret == CY_AS_ERROR_SUCCESS) {
-			/*
-			 * disable endpoint 2.  the storage module
-			 * will enable this EP if necessary.
-			 */
-			cy_as_dma_enable_end_point(dev_p,
-				CY_AS_FIRMWARE_ENDPOINT,
-				cy_false, cy_as_direction_in);
-
-			/*
-			 * clear the reset register.  this releases the
-			 * antioch micro-controller from reset and begins
-			 * running the code at address zero.
-			 */
-			cy_as_hal_write_register(dev_p->tag,
-				CY_AS_MEM_RST_CTRL_REG, 0x00);
-		}
-
-		/* Call the user Callback */
-		node->cb_p((cy_as_device_handle)dev_p, ret, node->client_data,
-			node->data_type, node->data);
-		cy_as_remove_c_b_node(dev_p->func_cbs_misc);
-	} else {
-		/* This is the header data that was allocated in the
-		 * download firmware function, and can be safely freed
-		 * here. */
-		uint32_t state = cy_as_hal_disable_interrupts();
-		cy_as_hal_c_b_free(mem_p);
-		cy_as_hal_enable_interrupts(state);
-	}
-}
-
-cy_as_return_status_t
-cy_as_misc_download_firmware(cy_as_device_handle handle,
-						   const void *mem_p,
-						   uint16_t size,
-						   cy_as_function_callback cb,
-						   uint32_t client)
-{
-	uint8_t *header;
-	cy_as_return_status_t ret;
-	cy_bool standby;
-	cy_as_device *dev_p;
-	cy_as_dma_callback dmacb = 0;
-	uint32_t state;
-
-	cy_as_log_debug_message(6, "cy_as_misc_download_firmware called");
-
-	/* Make sure we have a valid device */
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	/*
-	* if the device has not been initialized, we cannot download firmware
-	* to the device.
-	*/
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	/*
-	* make sure west bridge is not in standby
-	*/
-	ret = cy_as_misc_in_standby(dev_p, &standby);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (standby)
-		return CY_AS_ERROR_IN_STANDBY;
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	/*
-	* make sure we are in configuration mode
-	*/
-	if ((cy_as_hal_read_register(dev_p->tag, CY_AS_MEM_P0_VM_SET) &
-		CY_AS_MEM_P0_VM_SET_CFGMODE) == 0)
-		return CY_AS_ERROR_NOT_IN_CONFIG_MODE;
-
-	/* Maximum firmware size is 24k */
-	if (size > CY_AS_MAXIMUM_FIRMWARE_SIZE)
-		return CY_AS_ERROR_INVALID_SIZE;
-
-	/* Make sure the size is an even number of bytes as well */
-	if (size & 0x01)
-		return CY_AS_ERROR_ALIGNMENT_ERROR;
-
-	/*
-	 * write the two word header that gives the base address and
-	 * size of the firmware image to download
-	 */
-	state = cy_as_hal_disable_interrupts();
-	header = (uint8_t *)cy_as_hal_c_b_alloc(4);
-	cy_as_hal_enable_interrupts(state);
-	if (header == NULL)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	header[0] = 0x00;
-	header[1] = 0x00;
-	header[2] = (uint8_t)(size & 0xff);
-	header[3] = (uint8_t)((size >> 8) & 0xff);
-
-	/* Enable the firmware endpoint */
-	ret = cy_as_dma_enable_end_point(dev_p, CY_AS_FIRMWARE_ENDPOINT,
-		cy_true, cy_as_direction_in);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/*
-	* setup DMA for 64 byte packets. this is the requirement for downloading
-	* firmware to west bridge.
-	*/
-	cy_as_dma_set_max_dma_size(dev_p, CY_AS_FIRMWARE_ENDPOINT, 64);
-
-	if (cb)
-		dmacb = my_dma_callback;
-
-	ret = cy_as_dma_queue_request(dev_p, CY_AS_FIRMWARE_ENDPOINT, header,
-		4, cy_false, cy_false, dmacb);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/*
-	* write the firmware image to the west bridge device
-	*/
-	ret = cy_as_dma_queue_request(dev_p, CY_AS_FIRMWARE_ENDPOINT,
-		(void *)mem_p, size, cy_false, cy_false, dmacb);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cb) {
-		cy_as_func_c_b_node *cbnode = cy_as_create_func_c_b_node_data(
-			cb, client, CY_FUNCT_CB_MISC_DOWNLOADFIRMWARE, 0);
-
-		if (cbnode == 0)
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		else
-			cy_as_insert_c_b_node(dev_p->func_cbs_misc, cbnode);
-
-		ret = cy_as_dma_kick_start(dev_p, CY_AS_FIRMWARE_ENDPOINT);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			return ret;
-	} else {
-		ret = cy_as_dma_drain_queue(dev_p,
-			CY_AS_FIRMWARE_ENDPOINT, cy_true);
-
-		/* Free the header memory that was allocated earlier. */
-		cy_as_hal_c_b_free(header);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			return ret;
-
-		/*
-		* disable EP 2. the storage module will
-		* enable this EP if necessary.
-		*/
-		cy_as_dma_enable_end_point(dev_p, CY_AS_FIRMWARE_ENDPOINT,
-			cy_false, cy_as_direction_in);
-
-		/*
-		* clear the reset register.  this releases the west bridge
-		* micro-controller from reset and begins running the code at
-		* address zero.
-		*/
-		cy_as_hal_write_register(dev_p->tag,
-			CY_AS_MEM_RST_CTRL_REG, 0x00);
-	}
-
-	/*
-	* the firmware is not marked as loaded until the firmware
-	* initializes west bridge and a request is sent from west bridge
-	* to the P port processor indicating that west bridge is ready.
-	*/
-	return CY_AS_ERROR_SUCCESS;
-}
-
-
-static cy_as_return_status_t
-my_handle_response_get_firmware_version(cy_as_device *dev_p,
-				cy_as_ll_request_response *req_p,
-				cy_as_ll_request_response *reply_p,
-				cy_as_get_firmware_version_data *data_p)
-{
-
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint16_t val;
-
-	if (cy_as_ll_request_response__get_code(reply_p)
-		!= CY_RESP_FIRMWARE_VERSION) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	data_p->major = cy_as_ll_request_response__get_word(reply_p, 0);
-	data_p->minor = cy_as_ll_request_response__get_word(reply_p, 1);
-	data_p->build = cy_as_ll_request_response__get_word(reply_p, 2);
-	val	= cy_as_ll_request_response__get_word(reply_p, 3);
-	data_p->media_type   = (uint8_t)(((val >> 8) & 0xFF) | (val & 0xFF));
-	val	= cy_as_ll_request_response__get_word(reply_p, 4);
-	data_p->is_debug_mode = (cy_bool)(val & 0xFF);
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_misc_get_firmware_version(cy_as_device_handle handle,
-				cy_as_get_firmware_version_data *data,
-				cy_as_function_callback cb,
-				uint32_t client)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_bool standby;
-	cy_as_ll_request_response *req_p, *reply_p;
-
-	cy_as_device *dev_p;
-
-	(void)client;
-
-	cy_as_log_debug_message(6, "cy_as_misc_get_firmware_version called");
-
-	/* Make sure we have a valid device */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	/*
-	* make sure antioch is not in standby
-	*/
-	ret = cy_as_misc_in_standby(dev_p, &standby);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-	if (standby)
-		return CY_AS_ERROR_IN_STANDBY;
-
-	/* Make sure the Antioch is not in suspend mode. */
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_GET_FIRMWARE_VERSION,
-		CY_RQT_GENERAL_RQT_CONTEXT, 0);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/*
-	 * Reserve space for the reply, the reply data
-	 * will not exceed three words
-	 */
-	reply_p = cy_as_ll_create_response(dev_p, 5);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* Request and response are freed in
-		 * MyHandleResponseGetFirmwareVersion. */
-		ret = my_handle_response_get_firmware_version(dev_p,
-			req_p, reply_p, data);
-		return ret;
-	} else {
-
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MISC_GETFIRMWAREVERSION, data,
-			dev_p->func_cbs_misc, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_misc_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-		/* The request and response are freed
-		 * as part of the MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_misc_get_firmware_version);
-
-static cy_as_return_status_t
-my_handle_response_read_m_c_u_register(cy_as_device *dev_p,
-				cy_as_ll_request_response *req_p,
-				cy_as_ll_request_response *reply_p,
-				uint8_t *data_p)
-{
-
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (cy_as_ll_request_response__get_code(reply_p)
-		!= CY_RESP_MCU_REGISTER_DATA) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	*data_p = (uint8_t)
-		(cy_as_ll_request_response__get_word(reply_p, 0));
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-static cy_as_return_status_t
-my_handle_response_get_gpio_value(cy_as_device *dev_p,
-		cy_as_ll_request_response *req_p,
-		cy_as_ll_request_response *reply_p,
-		uint8_t *data_p)
-{
-
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (cy_as_ll_request_response__get_code(reply_p)
-		!= CY_RESP_GPIO_STATE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-	} else
-		*data_p = (uint8_t)
-			(cy_as_ll_request_response__get_word(reply_p, 0));
-
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-
-cy_as_return_status_t cy_as_misc_set_sd_power_polarity(
-	cy_as_device_handle handle,
-	cy_as_misc_signal_polarity polarity,
-	cy_as_function_callback cb,
-	uint32_t client)
-{
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	if (!cy_as_device_is_firmware_loaded(dev_p))
-		return CY_AS_ERROR_NO_FIRMWARE;
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_SDPOLARITY,
-		CY_RQT_GENERAL_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		(uint16_t)polarity);
-
-	/*
-	 * Reserve space for the reply, the reply data will
-	 * not exceed one word
-	 */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return (my_handle_response_no_data(dev_p, req_p, reply_p));
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MISC_SETSDPOLARITY, 0, dev_p->func_cbs_misc,
-			CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-			cy_as_misc_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* The request and response are freed
-		 * as part of the FuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-	return ret;
-}
-
-
-cy_as_return_status_t
-cy_as_misc_read_m_c_u_register(cy_as_device_handle handle,
-						  uint16_t address,
-						  uint8_t *value,
-						  cy_as_function_callback cb,
-						  uint32_t client)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_ll_request_response *req_p, *reply_p;
-
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_misc_read_m_c_u_register called");
-
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	/* Check whether the firmware supports this command. */
-	if (cy_as_device_is_nand_storage_supported(dev_p))
-		return CY_AS_ERROR_NOT_SUPPORTED;
-
-	/* Make sure the Antioch is not in suspend mode. */
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_READ_MCU_REGISTER,
-		CY_RQT_GENERAL_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0, (uint16_t)address);
-
-	/* Reserve space for the reply, the reply
-	 * data will not exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-			CY_RESP_MCU_REGISTER_DATA) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		*value = (uint8_t)(cy_as_ll_request_response__get_word
-			(reply_p, 0));
-	} else {
-
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MISC_READMCUREGISTER, value,
-			dev_p->func_cbs_misc, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_misc_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-		/* The request and response are freed
-		 * as part of the MiscFuncCallback */
-		return ret;
-	}
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_misc_read_m_c_u_register);
-
-cy_as_return_status_t
-cy_as_misc_write_m_c_u_register(cy_as_device_handle handle,
-						   uint16_t address,
-						   uint8_t mask,
-						   uint8_t value,
-						   cy_as_function_callback cb,
-						   uint32_t client)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_misc_write_m_c_u_register called");
-
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	/* Check whether the firmware supports this command. */
-	if (cy_as_device_is_nand_storage_supported(dev_p))
-		return CY_AS_ERROR_NOT_SUPPORTED;
-
-	/* Make sure the Antioch is not in suspend mode. */
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_WRITE_MCU_REGISTER,
-		CY_RQT_GENERAL_RQT_CONTEXT, 2);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0, (uint16_t)address);
-	cy_as_ll_request_response__set_word(req_p, 1,
-		(uint16_t)((mask << 8) | value));
-
-	/*
-	 * Reserve space for the reply, the reply data
-	 * will not exceed one word
-	 */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-			CY_RESP_SUCCESS_FAILURE) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MISC_WRITEMCUREGISTER, 0,
-			dev_p->func_cbs_misc, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_misc_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/*
-		 * The request and response are freed as part of the
-		 * MiscFuncCallback
-		 */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-my_handle_response_reset(cy_as_device *dev_p,
-					  cy_as_ll_request_response *req_p,
-					  cy_as_ll_request_response *reply_p,
-					  cy_as_reset_type type)
-{
-	uint16_t   v;
-
-	(void)req_p;
-	(void)reply_p;
-
-	/*
-	 * if the device is in suspend mode, it needs to be woken up
-	 * so that the write to the reset control register succeeds.
-	 * we need not however wait for the  wake up procedure to be
-	 * complete.
-	 */
-	if (cy_as_device_is_in_suspend_mode(dev_p)) {
-		v = cy_as_hal_read_register(dev_p->tag,
-			CY_AS_MEM_CM_WB_CFG_ID);
-		cy_as_hal_sleep(1);
-	}
-
-	if (type == cy_as_reset_hard) {
-		cy_as_misc_cancel_ex_requests(dev_p);
-		cy_as_hal_write_register(dev_p->tag, CY_AS_MEM_RST_CTRL_REG,
-			CY_AS_MEM_RST_CTRL_REG_HARD);
-		cy_as_device_set_unconfigured(dev_p);
-		cy_as_device_set_firmware_not_loaded(dev_p);
-		cy_as_device_set_dma_stopped(dev_p);
-		cy_as_device_set_low_level_stopped(dev_p);
-		cy_as_device_set_intr_stopped(dev_p);
-		cy_as_device_clear_suspend_mode(dev_p);
-		cy_as_usb_cleanup(dev_p);
-		cy_as_storage_cleanup(dev_p);
-
-		/*
-		 * wait for a small amount of time to
-		 * allow reset to be complete.
-		 */
-		cy_as_hal_sleep(100);
-	}
-
-	cy_as_device_clear_reset_pending(dev_p);
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-cy_as_return_status_t
-cy_as_misc_reset(cy_as_device_handle handle,
-				cy_as_reset_type type,
-				cy_bool flush,
-				cy_as_function_callback cb,
-				uint32_t client)
-{
-	cy_as_device *dev_p;
-	cy_as_end_point_number_t i;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	(void)client;
-	(void)cb;
-
-	cy_as_log_debug_message(6, "cy_as_misc_reset_e_x called");
-
-	/* Make sure the device is ready for the command. */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	/*
-	 * soft reset is not supported until we close on the issues
-	 * in the firmware with what needs to happen.
-	 */
-	if (type == cy_as_reset_soft)
-		return CY_AS_ERROR_NOT_YET_SUPPORTED;
-
-	cy_as_device_set_reset_pending(dev_p);
-
-	if (flush) {
-		/* Unable to DrainQueues in polling mode */
-		if ((dev_p->storage_cb || dev_p->storage_cb_ms) &&
-			cy_as_hal_is_polling())
-			return CY_AS_ERROR_ASYNC_PENDING;
-
-		/*
-		* shutdown the endpoints so no more traffic can be queued
-		*/
-		for (i = 0; i < 15; i++)
-			cy_as_dma_enable_end_point(dev_p, i, cy_false,
-				cy_as_direction_dont_change);
-
-		/*
-		 * if we are in normal mode, drain all traffic across all
-		 * endpoints to be sure all traffic is flushed. if the
-		 * device is suspended, data will not be coming in on any
-		 * endpoint and all outstanding DMA operations can be
-		 * cancelled.
-		 */
-		if (cy_as_device_is_in_suspend_mode(dev_p)) {
-			for (i = 0; i < 15; i++)
-				cy_as_dma_cancel(dev_p, i,
-					CY_AS_ERROR_CANCELED);
-		} else {
-			for (i = 0; i < 15; i++) {
-				if ((i == CY_AS_P2S_WRITE_ENDPOINT) ||
-					(i == CY_AS_P2S_READ_ENDPOINT))
-					cy_as_dma_drain_queue(dev_p, i,
-						cy_false);
-				else
-					cy_as_dma_drain_queue(dev_p, i,
-						cy_true);
-			}
-		}
-	} else {
-		/* No flush was requested, so cancel any outstanding DMAs
-		 * so the user callbacks are called as needed
-		 */
-		if (cy_as_device_is_storage_async_pending(dev_p)) {
-			for (i = 0; i < 15; i++)
-				cy_as_dma_cancel(dev_p, i,
-					CY_AS_ERROR_CANCELED);
-		}
-	}
-
-	ret = my_handle_response_reset(dev_p, 0, 0, type);
-
-	if (cb)
-		/* Even though no mailbox communication was needed,
-		 * issue the callback so the user does not need to
-		 * special case their code. */
-		cb((cy_as_device_handle)dev_p, ret, client,
-			CY_FUNCT_CB_MISC_RESET, 0);
-
-	/*
-	 * initialize any registers that may have been
-	 * changed when the device was reset.
-	 */
-	cy_as_hal_init_dev_registers(dev_p->tag, cy_false);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_misc_reset);
-
-static cy_as_return_status_t
-get_unallocated_resource(cy_as_device *dev_p, cy_as_resource_type resource)
-{
-	uint8_t shift = 0;
-	uint16_t v;
-	cy_as_return_status_t ret = CY_AS_ERROR_NOT_ACQUIRED;
-
-	switch (resource) {
-	case cy_as_bus_u_s_b:
-		shift = 4;
-		break;
-	case cy_as_bus_1:
-		shift = 0;
-		break;
-	case cy_as_bus_0:
-		shift = 2;
-		break;
-	default:
-		cy_as_hal_assert(cy_false);
-		break;
-	}
-
-	/* Get the semaphore value for this resource */
-	v = cy_as_hal_read_register(dev_p->tag, CY_AS_MEM_P0_RSE_ALLOCATE);
-	v = (v >> shift) & 0x03;
-
-	if (v == 0x03) {
-		ret = CY_AS_ERROR_RESOURCE_ALREADY_OWNED;
-	} else if ((v & 0x01) == 0) {
-		/* The resource is not owned by anyone, we can try to get it */
-		cy_as_hal_write_register(dev_p->tag,
-			CY_AS_MEM_P0_RSE_MASK, (0x03 << shift));
-		v = cy_as_hal_read_register(dev_p->tag, CY_AS_MEM_P0_RSE_MASK);
-		cy_as_hal_write_register(dev_p->tag,
-			CY_AS_MEM_P0_RSE_ALLOCATE, (0x01 << shift));
-		v = cy_as_hal_read_register(dev_p->tag, CY_AS_MEM_P0_RSE_MASK);
-
-		v = cy_as_hal_read_register(dev_p->tag,
-			CY_AS_MEM_P0_RSE_ALLOCATE);
-		v = (v >> shift) & 0x03;
-		if (v == 0x03)
-			ret = CY_AS_ERROR_SUCCESS;
-	}
-
-	return ret;
-}
-
-static cy_as_return_status_t
-my_handle_response_acquire_resource(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p,
-			cy_as_resource_type *resource)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	if (ret == CY_AS_ERROR_SUCCESS) {
-			ret = get_unallocated_resource(dev_p, *resource);
-			if (ret != CY_AS_ERROR_NOT_ACQUIRED)
-				ret = CY_AS_ERROR_SUCCESS;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_misc_acquire_resource(cy_as_device_handle handle,
-			cy_as_resource_type *resource,
-			cy_bool force,
-			cy_as_function_callback cb,
-			uint32_t client)
-{
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_return_status_t ret;
-
-	cy_as_device *dev_p;
-
-	(void)client;
-
-	cy_as_log_debug_message(6, "cy_as_misc_acquire_resource called");
-
-	if (*resource != cy_as_bus_u_s_b && *resource !=
-		cy_as_bus_0 && *resource != cy_as_bus_1)
-			return CY_AS_ERROR_INVALID_RESOURCE;
-
-
-	/* Make sure the device is ready to accept the command. */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-
-	ret = get_unallocated_resource(dev_p, *resource);
-
-	/*
-	 * make sure that the callback is called if the resource is
-	 * successfully acquired at this point.
-	 */
-	if ((ret == CY_AS_ERROR_SUCCESS) && (cb != 0))
-		cb(handle, ret, client,
-			CY_FUNCT_CB_MISC_ACQUIRERESOURCE, resource);
-
-	if (ret != CY_AS_ERROR_NOT_ACQUIRED)
-		return ret;
-
-	if (!force)
-		return CY_AS_ERROR_NOT_ACQUIRED;
-
-	/* Create the request to acquire the resource */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_ACQUIRE_RESOURCE,
-		CY_RQT_RESOURCE_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0, (uint16_t)(*resource));
-
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-			CY_RESP_SUCCESS_FAILURE) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	} else {
-			ret = cy_as_misc_send_request(dev_p, cb, client,
-				CY_FUNCT_CB_MISC_ACQUIRERESOURCE, resource,
-				dev_p->func_cbs_res, CY_AS_REQUEST_RESPONSE_EX,
-				req_p, reply_p, cy_as_misc_func_callback);
-
-			if (ret != CY_AS_ERROR_SUCCESS)
-					goto destroy;
-
-			/* The request and response are freed
-			 * as part of the MiscFuncCallback */
-			return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		ret = get_unallocated_resource(dev_p, *resource);
-		if (ret != CY_AS_ERROR_NOT_ACQUIRED)
-			ret = CY_AS_ERROR_SUCCESS;
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_misc_acquire_resource);
-
-cy_as_return_status_t
-cy_as_misc_release_resource(cy_as_device_handle handle,
-	cy_as_resource_type resource)
-{
-	uint8_t shift = 0;
-	uint16_t v;
-
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_misc_release_resource called");
-
-	/* Make sure the device is ready for the command. */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	if (resource != cy_as_bus_u_s_b && resource !=
-		cy_as_bus_0 && resource != cy_as_bus_1)
-		return CY_AS_ERROR_INVALID_RESOURCE;
-
-	switch (resource) {
-	case cy_as_bus_u_s_b:
-		shift = 4;
-		break;
-	case cy_as_bus_1:
-		shift = 0;
-		break;
-	case cy_as_bus_0:
-		shift = 2;
-		break;
-	default:
-		cy_as_hal_assert(cy_false);
-		break;
-	}
-
-	/* Get the semaphore value for this resource */
-	v = (cy_as_hal_read_register(dev_p->tag,
-		CY_AS_MEM_P0_RSE_ALLOCATE) >> shift) & 0x03;
-	if (v == 0 || v == 1 || v == 2)
-		return CY_AS_ERROR_RESOURCE_NOT_OWNED;
-
-	cy_as_hal_write_register(dev_p->tag,
-		CY_AS_MEM_P0_RSE_MASK, (0x03 << shift));
-	cy_as_hal_write_register(dev_p->tag,
-		CY_AS_MEM_P0_RSE_ALLOCATE, (0x02 << shift));
-	cy_as_hal_write_register(dev_p->tag,
-		CY_AS_MEM_P0_RSE_MASK, 0);
-
-	return CY_AS_ERROR_SUCCESS;
-}
-EXPORT_SYMBOL(cy_as_misc_release_resource);
-
-cy_as_return_status_t
-cy_as_misc_set_trace_level(cy_as_device_handle handle,
-						uint8_t level,
-						cy_as_bus_number_t bus,
-						uint32_t device,
-						uint32_t unit,
-						cy_as_function_callback cb,
-						uint32_t client)
-{
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_return_status_t ret;
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_misc_set_trace_level called");
-
-	/* Make sure the device is ready for the command. */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	if (bus < 0 || bus >= CY_AS_MAX_BUSES)
-		return CY_AS_ERROR_NO_SUCH_BUS;
-
-	if (device >= CY_AS_MAX_STORAGE_DEVICES)
-		return CY_AS_ERROR_NO_SUCH_DEVICE;
-
-	if (unit > 255)
-		return CY_AS_ERROR_NO_SUCH_UNIT;
-
-	if (level >= CYAS_FW_TRACE_MAX_LEVEL)
-		return CY_AS_ERROR_INVALID_TRACE_LEVEL;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_SET_TRACE_LEVEL,
-		CY_RQT_GENERAL_RQT_CONTEXT, 2);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		(uint16_t)level);
-	cy_as_ll_request_response__set_word(req_p, 1,
-		(uint16_t)((bus << 12) | (device << 8) | (unit)));
-
-	/*
-	 * Reserve space for the reply, the reply data will not
-	 * exceed three words
-	 */
-	reply_p = cy_as_ll_create_response(dev_p, 2);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-			CY_RESP_SUCCESS_FAILURE) {
-			ret = CY_AS_ERROR_NOT_SUPPORTED;
-			goto destroy;
-		}
-
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	} else {
-
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MISC_SETTRACELEVEL, 0, dev_p->func_cbs_misc,
-			CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-			cy_as_misc_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-		/* The request and response are freed as part of the
-		 * MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_misc_heart_beat_control(cy_as_device_handle handle,
-						   cy_bool enable,
-						   cy_as_function_callback cb,
-						   uint32_t client)
-{
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_return_status_t ret;
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_misc_heart_beat_control called");
-
-	/* Make sure the device is ready for the command. */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_CONTROL_ANTIOCH_HEARTBEAT,
-		CY_RQT_GENERAL_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0, (uint16_t)enable);
-
-	/* Reserve space for the reply, the reply
-	 * data will not exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-			CY_RESP_SUCCESS_FAILURE) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	} else {
-
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MISC_HEARTBEATCONTROL, 0,
-			dev_p->func_cbs_misc, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_misc_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-		/* The request and response are freed as part of the
-		 * MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_misc_heart_beat_control);
-
-static cy_as_return_status_t
-my_set_sd_clock_freq(
-		cy_as_device		  *dev_p,
-		uint8_t			  card_type,
-		uint8_t			  setting,
-		cy_as_function_callback cb,
-		uint32_t			 client)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_ll_request_response *req_p, *reply_p;
-
-	if (cy_as_device_is_in_callback(dev_p) && (cb == 0))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_SET_SD_CLOCK_FREQ,
-		CY_RQT_GENERAL_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		(uint16_t)((card_type << 8) | setting));
-
-	/* Reserve space for the reply, which will not exceed one word. */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-			CY_RESP_SUCCESS_FAILURE) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MISC_SETSDFREQ, 0, dev_p->func_cbs_misc,
-			CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-			cy_as_misc_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-		/* The request and response are freed as part of the
-		 * MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_misc_set_low_speed_sd_freq(
-		cy_as_device_handle	 handle,
-		cy_as_low_speed_sd_freq   setting,
-		cy_as_function_callback cb,
-		uint32_t			 client)
-{
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_misc_set_low_speed_sd_freq called");
-
-	/* Make sure the device is ready for the command. */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	if ((setting != CY_AS_SD_DEFAULT_FREQ) &&
-		(setting != CY_AS_SD_RATED_FREQ))
-		return CY_AS_ERROR_INVALID_PARAMETER;
-
-	return my_set_sd_clock_freq(dev_p, 0, (uint8_t)setting, cb, client);
-}
-EXPORT_SYMBOL(cy_as_misc_set_low_speed_sd_freq);
-
-cy_as_return_status_t
-cy_as_misc_set_high_speed_sd_freq(
-		cy_as_device_handle	 handle,
-		cy_as_high_speed_sd_freq  setting,
-		cy_as_function_callback cb,
-		uint32_t			 client)
-{
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_misc_set_high_speed_sd_freq called");
-
-	/* Make sure the device is ready for the command. */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	if ((setting != CY_AS_HS_SD_FREQ_24) &&
-		(setting != CY_AS_HS_SD_FREQ_48))
-		return CY_AS_ERROR_INVALID_PARAMETER;
-
-	return my_set_sd_clock_freq(dev_p, 1, (uint8_t)setting, cb, client);
-}
-EXPORT_SYMBOL(cy_as_misc_set_high_speed_sd_freq);
-
-cy_as_return_status_t
-cy_as_misc_get_gpio_value(cy_as_device_handle handle,
-		cy_as_misc_gpio pin,
-		uint8_t *value,
-		cy_as_function_callback cb,
-		uint32_t client)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_device *dev_p;
-	uint16_t v;
-
-	cy_as_log_debug_message(6, "cy_as_misc_get_gpio_value called");
-
-	/* Make sure the device is ready for the command. */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	/* If the pin specified is UVALID, there is no need
-	 * for firmware to be loaded. */
-	if (pin == cy_as_misc_gpio_U_valid) {
-		v = cy_as_hal_read_register(dev_p->tag, CY_AS_MEM_PMU_UPDATE);
-		*value = (uint8_t)(v & CY_AS_MEM_PMU_UPDATE_UVALID);
-
-		if (cb != 0)
-			cb(dev_p, ret, client,
-				CY_FUNCT_CB_MISC_GETGPIOVALUE, value);
-
-		return ret;
-	}
-
-	/* Check whether the firmware supports this command. */
-	if (cy_as_device_is_nand_storage_supported(dev_p))
-		return CY_AS_ERROR_NOT_SUPPORTED;
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	/* Make sure the pin selected is valid */
-	if ((pin != cy_as_misc_gpio_1) && (pin != cy_as_misc_gpio_0))
-		return CY_AS_ERROR_INVALID_PARAMETER;
-
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_GET_GPIO_STATE,
-		CY_RQT_GENERAL_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0, ((uint8_t)pin << 8));
-
-	/* Reserve space for the reply, which will not exceed one word. */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-			CY_RESP_GPIO_STATE) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		*value = (uint8_t)
-			cy_as_ll_request_response__get_word(reply_p, 0);
-	} else {
-
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MISC_GETGPIOVALUE, value,
-			dev_p->func_cbs_misc, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_misc_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-		/* The request and response are freed as part of the
-		 * MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_misc_get_gpio_value);
-
-cy_as_return_status_t
-cy_as_misc_set_gpio_value(cy_as_device_handle handle,
-		cy_as_misc_gpio pin,
-		uint8_t value,
-		cy_as_function_callback cb,
-		uint32_t client)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_device *dev_p;
-	uint16_t v;
-
-	cy_as_log_debug_message(6, "cy_as_misc_set_gpio_value called");
-
-	/* Make sure the device is ready for the command. */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	/* If the pin specified is UVALID, there is
-	 * no need for firmware to be loaded. */
-	if (pin == cy_as_misc_gpio_U_valid) {
-		v = cy_as_hal_read_register(dev_p->tag, CY_AS_MEM_PMU_UPDATE);
-		if (value)
-			cy_as_hal_write_register(dev_p->tag,
-				CY_AS_MEM_PMU_UPDATE,
-				(v | CY_AS_MEM_PMU_UPDATE_UVALID));
-		else
-			cy_as_hal_write_register(dev_p->tag,
-				CY_AS_MEM_PMU_UPDATE,
-				(v & ~CY_AS_MEM_PMU_UPDATE_UVALID));
-
-		if (cb != 0)
-			cb(dev_p, ret, client,
-				CY_FUNCT_CB_MISC_SETGPIOVALUE, 0);
-		return ret;
-	}
-
-	/* Check whether the firmware supports this command. */
-	if (cy_as_device_is_nand_storage_supported(dev_p))
-		return CY_AS_ERROR_NOT_SUPPORTED;
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	/* Make sure the pin selected is valid */
-	if ((pin < cy_as_misc_gpio_0) || (pin > cy_as_misc_gpio_U_valid))
-		return CY_AS_ERROR_INVALID_PARAMETER;
-
-	/* Create and initialize the low level request to the firmware. */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_SET_GPIO_STATE,
-		CY_RQT_GENERAL_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	v = (uint16_t)(((uint8_t)pin << 8) | (value > 0));
-	cy_as_ll_request_response__set_word(req_p, 0, v);
-
-	/* Reserve space for the reply, which will not exceed one word. */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-			CY_RESP_SUCCESS_FAILURE) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	} else {
-
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MISC_SETGPIOVALUE, 0,
-			dev_p->func_cbs_misc, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_misc_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-		/* The request and response are freed as part of the
-		 * MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_misc_set_gpio_value);
-
-static cy_as_return_status_t
-my_enter_standby(cy_as_device *dev_p, cy_bool pin)
-{
-	cy_as_misc_cancel_ex_requests(dev_p);
-
-	/* Save the current values in the critical P-port
-	 * registers, where necessary. */
-	cy_as_hal_read_regs_before_standby(dev_p->tag);
-
-	if (pin) {
-		if (cy_as_hal_set_wakeup_pin(dev_p->tag, cy_false))
-			cy_as_device_set_pin_standby(dev_p);
-		else
-			return CY_AS_ERROR_SETTING_WAKEUP_PIN;
-	} else {
-		/*
-		 * put antioch in the standby mode
-		 */
-		cy_as_hal_write_register(dev_p->tag,
-			CY_AS_MEM_PWR_MAGT_STAT, 0x02);
-		cy_as_device_set_register_standby(dev_p);
-	}
-
-	/*
-	 * when the antioch comes out of standby, we have to wait until
-	 * the firmware initialization completes before sending other
-	 * requests down.
-	 */
-	cy_as_device_set_firmware_not_loaded(dev_p);
-
-	/*
-	 * keep west bridge interrupt disabled until the device is being woken
-	 * up from standby.
-	 */
-	dev_p->stby_int_mask = cy_as_hal_disable_interrupts();
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-static cy_as_return_status_t
-my_handle_response_enter_standby(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p,
-			cy_bool pin)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	ret = cy_as_ll_request_response__get_word(reply_p, 0);
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	ret = my_enter_standby(dev_p, pin);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_misc_enter_standby(cy_as_device_handle handle,
-						cy_bool pin,
-						cy_as_function_callback cb,
-						uint32_t client)
-{
-	cy_as_device *dev_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_bool standby;
-
-	cy_as_log_debug_message(6, "cy_as_misc_enter_standby called");
-
-	/* Make sure we have a valid device */
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	/*
-	 * if we already are in standby, do not do it again and let the
-	 * user know via the error return.
-	 */
-	ret = cy_as_misc_in_standby(handle, &standby);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (standby == cy_true)
-		return CY_AS_ERROR_ALREADY_STANDBY;
-
-	/*
-	 * if the user wants to transition from suspend mode to standby mode,
-	 * the device needs to be woken up so that it can complete all pending
-	 * operations.
-	 */
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		cy_as_misc_leave_suspend(dev_p, 0, 0);
-
-	if (dev_p->usb_count) {
-		/*
-		 * we do not allow west bridge to go into standby mode when the
-		 * USB stack is initialized.  you must stop the USB stack in
-		 * order to enter standby mode.
-		 */
-		return CY_AS_ERROR_USB_RUNNING;
-	}
-
-	/*
-	 * if the storage stack is not running, the device can directly be
-	 * put into sleep mode. otherwise, the firmware needs to be signaled
-	 * to prepare for going into sleep mode.
-	 */
-	if (dev_p->storage_count) {
-		/*
-		 * if there are async storage operations pending,
-		 * make one attempt to complete them.
-		 */
-		if (cy_as_device_is_storage_async_pending(dev_p)) {
-			/* DrainQueue will not work in polling mode */
-			if (cy_as_hal_is_polling())
-				return CY_AS_ERROR_ASYNC_PENDING;
-
-			cy_as_dma_drain_queue(dev_p,
-				CY_AS_P2S_READ_ENDPOINT, cy_false);
-			cy_as_dma_drain_queue(dev_p,
-				CY_AS_P2S_WRITE_ENDPOINT, cy_false);
-
-			/*
-			 * if more storage operations were queued
-			 * at this stage, return an error.
-			 */
-			if (cy_as_device_is_storage_async_pending(dev_p))
-				return CY_AS_ERROR_ASYNC_PENDING;
-		}
-
-		req_p = cy_as_ll_create_request(dev_p,
-			CY_RQT_PREPARE_FOR_STANDBY,
-			CY_RQT_GENERAL_RQT_CONTEXT, 1);
-		if (req_p == 0)
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-
-		reply_p = cy_as_ll_create_response(dev_p, 1);
-		if (reply_p == 0) {
-			cy_as_ll_destroy_request(dev_p, req_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-
-		if (!cb) {
-			ret = cy_as_ll_send_request_wait_reply(dev_p,
-				req_p, reply_p);
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			/* The request and response are freed
-			 * in the HandleResponse */
-			return my_handle_response_enter_standby(dev_p,
-				req_p, reply_p, pin);
-
-		} else {
-			ret = cy_as_misc_send_request(dev_p, cb, client,
-				CY_FUNCT_CB_MISC_ENTERSTANDBY,  (void *)pin,
-				dev_p->func_cbs_misc, CY_AS_REQUEST_RESPONSE_EX,
-				req_p, reply_p, cy_as_misc_func_callback);
-
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			/* The request and response are freed
-			 * as part of the MiscFuncCallback */
-			return ret;
-		}
-destroy:
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	} else {
-		ret = my_enter_standby(dev_p, pin);
-		if (cb)
-			/* Even though no mailbox communication was
-			 * needed, issue the callback so the user
-			 * does not need to special case their code. */
-			cb((cy_as_device_handle)dev_p, ret, client,
-				CY_FUNCT_CB_MISC_ENTERSTANDBY, 0);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_misc_enter_standby);
-
-cy_as_return_status_t
-cy_as_misc_enter_standby_e_x_u(cy_as_device_handle handle,
-						cy_bool pin,
-						cy_bool uvalid_special,
-						cy_as_function_callback cb,
-						uint32_t client)
-{
-	cy_as_device *dev_p;
-
-	dev_p = (cy_as_device *)handle;
-	if (uvalid_special)
-		cy_as_hal_write_register(dev_p->tag, 0xc5, 0x4);
-
-	return cy_as_misc_enter_standby(handle, pin, cb, client);
-}
-
-cy_as_return_status_t
-cy_as_misc_leave_standby(cy_as_device_handle handle,
-	cy_as_resource_type resource)
-{
-	cy_as_device *dev_p;
-	uint16_t v;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint32_t count = 8;
-	uint8_t  retry = 1;
-
-	cy_as_log_debug_message(6, "cy_as_misc_leave_standby called");
-	(void)resource;
-
-	/* Make sure we have a valid device */
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (cy_as_device_is_register_standby(dev_p)) {
-		/*
-		 * set a flag to indicate that the west bridge is waking
-		 * up from standby.
-		 */
-		cy_as_device_set_waking(dev_p);
-
-		/*
-		 * the initial read will not succeed, but will just wake
-		 * the west bridge device from standby.  successive reads
-		 * should succeed and in that way we know west bridge is awake.
-		 */
-		v = cy_as_hal_read_register(dev_p->tag,
-			CY_AS_MEM_CM_WB_CFG_ID);
-
-		do {
-			/*
-			 * we have initiated the operation to leave standby, now
-			 * we need to wait at least N ms before trying to access
-			 * the west bridge device to insure the PLLs have locked
-			 * and we can talk to the device.
-			 */
-			if (cy_as_device_is_crystal(dev_p))
-				cy_as_hal_sleep(
-					CY_AS_LEAVE_STANDBY_DELAY_CRYSTAL);
-			else
-				cy_as_hal_sleep(
-					CY_AS_LEAVE_STANDBY_DELAY_CLOCK);
-			v = cy_as_hal_read_register(dev_p->tag,
-				CY_AS_MEM_CM_WB_CFG_ID);
-
-			/*
-			* if the P-SPI interface mode is in use, there may be a
-			* need to re-synchronise the serial clock used for
-			* astoria access.
-			*/
-			if (!is_valid_silicon_id(v)) {
-				if (cy_as_hal_sync_device_clocks(dev_p->tag) !=
-					cy_true) {
-					cy_as_hal_enable_interrupts(
-						dev_p->stby_int_mask);
-					return CY_AS_ERROR_TIMEOUT;
-				}
-			}
-		} while (!is_valid_silicon_id(v) && count-- > 0);
-
-		/*
-		 * if we tried to read the register and could not,
-		 * return a timeout
-		 */
-		if (count == 0) {
-			cy_as_hal_enable_interrupts(
-				dev_p->stby_int_mask);
-			return CY_AS_ERROR_TIMEOUT;
-		}
-
-		/*
-		 * the standby flag is cleared here, after the action to
-		 * exit standby has been taken. the wait for firmware
-		 * initialization, is ensured by marking the firmware as
-		 * not loaded until the init event is received.
-		 */
-		cy_as_device_clear_register_standby(dev_p);
-
-		/*
-		 * initialize any registers that may have been changed
-		 * while the device was in standby mode.
-		 */
-		cy_as_hal_init_dev_registers(dev_p->tag, cy_true);
-	} else if (cy_as_device_is_pin_standby(dev_p)) {
-		/*
-		 * set a flag to indicate that the west bridge is waking
-		 * up from standby.
-		 */
-		cy_as_device_set_waking(dev_p);
-
-try_wakeup_again:
-		/*
-		* try to set the wakeup pin, if this fails in the HAL
-		* layer, return this failure to the user.
-		*/
-		if (!cy_as_hal_set_wakeup_pin(dev_p->tag, cy_true)) {
-			cy_as_hal_enable_interrupts(dev_p->stby_int_mask);
-			return CY_AS_ERROR_SETTING_WAKEUP_PIN;
-		}
-
-		/*
-		* we have initiated the operation to leave standby, now
-		* we need to wait at least N ms before trying to access
-		* the west bridge device to insure the PL_ls have locked
-		* and we can talk to the device.
-		*/
-		if (cy_as_device_is_crystal(dev_p))
-			cy_as_hal_sleep(CY_AS_LEAVE_STANDBY_DELAY_CRYSTAL);
-		else
-			cy_as_hal_sleep(CY_AS_LEAVE_STANDBY_DELAY_CLOCK);
-
-		/*
-		 * initialize any registers that may have been changed
-		 * while the device was in standby mode.
-		 */
-		cy_as_hal_init_dev_registers(dev_p->tag, cy_true);
-
-		/*
-		 * the standby flag is cleared here, after the action to
-		 * exit standby has been taken. the wait for firmware
-		 * initialization, is ensured by marking the firmware as
-		 * not loaded until the init event is received.
-		 */
-		cy_as_device_clear_pin_standby(dev_p);
-	} else {
-		return CY_AS_ERROR_NOT_IN_STANDBY;
-	}
-
-	/*
-	 * the west bridge interrupt can be enabled now.
-	 */
-	cy_as_hal_enable_interrupts(dev_p->stby_int_mask);
-
-	/*
-	 * release the west bridge micro-_controller from reset,
-	 * so that firmware initialization can complete. the attempt
-	 * to release antioch reset is made up to 8 times.
-	 */
-	v = 0x03;
-	count = 0x08;
-	while ((v & 0x03) && (count)) {
-		cy_as_hal_write_register(dev_p->tag,
-			CY_AS_MEM_RST_CTRL_REG, 0x00);
-		v = cy_as_hal_read_register(dev_p->tag,
-			CY_AS_MEM_RST_CTRL_REG);
-		count--;
-	}
-
-	if (v & 0x03) {
-		cy_as_hal_print_message("failed to clear antioch reset\n");
-		return CY_AS_ERROR_TIMEOUT;
-	}
-
-	/*
-	 * if the wake-up pin is being used, wait here to make
-	 * sure that the wake-up event is received within a
-	 * reasonable delay. otherwise, toggle the wake-up pin
-	 * again in an attempt to start the firmware properly.
-	 */
-	if (retry) {
-		count = 10;
-		while (count) {
-			/* If the wake-up event has been received,
-			 * we can return. */
-			if (cy_as_device_is_firmware_loaded(dev_p))
-				break;
-			/* If we are in polling mode, the interrupt may
-			 * not have been serviced as yet. read the
-			 * interrupt status register. if a pending mailbox
-			 * interrupt is seen, we can assume that the
-			 * wake-up event will be received soon. */
-			v = cy_as_hal_read_register(dev_p->tag,
-				CY_AS_MEM_P0_INTR_REG);
-			if (v & CY_AS_MEM_P0_INTR_REG_MBINT)
-				break;
-
-			cy_as_hal_sleep(10);
-			count--;
-		}
-
-		if (!count) {
-			retry = 0;
-			dev_p->stby_int_mask = cy_as_hal_disable_interrupts();
-			cy_as_hal_set_wakeup_pin(dev_p->tag, cy_false);
-			cy_as_hal_sleep(10);
-			goto try_wakeup_again;
-		}
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_misc_leave_standby);
-
-cy_as_return_status_t
-cy_as_misc_register_callback(
-			/* Handle to the West Bridge device */
-			cy_as_device_handle handle,
-			/* The function to call */
-			cy_as_misc_event_callback  callback
-			)
-{
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_misc_register_callback called");
-
-	/* Make sure we have a valid device */
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	dev_p->misc_event_cb = callback;
-	return CY_AS_ERROR_SUCCESS;
-}
-
-cy_as_return_status_t
-cy_as_misc_storage_changed(cy_as_device_handle handle,
-						 cy_as_function_callback   cb,
-						 uint32_t client)
-{
-	cy_as_device *dev_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_bool standby;
-	cy_as_ll_request_response *req_p, *reply_p;
-
-	cy_as_log_debug_message(6, "cy_as_misc_storage_changed called");
-
-	/* Make sure the device is ready for the command. */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	/*
-	* make sure antioch is not in standby
-	*/
-	ret = cy_as_misc_in_standby(dev_p, &standby);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (standby)
-		return CY_AS_ERROR_IN_STANDBY;
-
-	/*
-	 * make sure westbridge is not in suspend mode.
-	 */
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_STORAGE_MEDIA_CHANGED,
-		CY_RQT_GENERAL_RQT_CONTEXT, 0);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* Reserve space for the reply, the reply data will
-	 * not exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-			CY_RESP_SUCCESS_FAILURE) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	} else {
-
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MISC_STORAGECHANGED, 0,
-			dev_p->func_cbs_misc, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_misc_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-		/* The request and response are freed as part of the
-		 * MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_misc_storage_changed);
-
-cy_as_return_status_t
-cy_as_misc_enter_suspend(
-		cy_as_device_handle	 handle,
-		cy_bool			   usb_wakeup_en,
-		cy_bool			   gpio_wakeup_en,
-		cy_as_function_callback cb,
-		uint32_t			 client)
-{
-	cy_as_device *dev_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_bool standby;
-	cy_as_ll_request_response *req_p, *reply_p;
-	uint16_t value;
-	uint32_t int_state;
-
-	cy_as_log_debug_message(6, "cy_as_misc_enter_suspend called");
-
-	/*
-	 * basic sanity checks to ensure that the device is initialised.
-	 */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	/*
-	 * make sure west bridge is not already in standby
-	 */
-	cy_as_misc_in_standby(dev_p, &standby);
-	if (standby)
-		return CY_AS_ERROR_IN_STANDBY;
-
-	/*
-	 * make sure that the device is not already in suspend mode.
-	 */
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	/*
-	 * make sure there is no active USB connection.
-	 */
-	if ((cy_as_device_is_usb_connected(dev_p)) && (dev_p->usb_last_event
-		!= cy_as_event_usb_suspend))
-		return CY_AS_ERROR_USB_CONNECTED;
-
-	/*
-	 * make sure that there are no async requests at this point in time.
-	 */
-	int_state = cy_as_hal_disable_interrupts();
-	if ((dev_p->func_cbs_misc->count) || (dev_p->func_cbs_res->count) ||
-		(dev_p->func_cbs_stor->count) || (dev_p->func_cbs_usb->count)) {
-		cy_as_hal_enable_interrupts(int_state);
-		return CY_AS_ERROR_ASYNC_PENDING;
-	}
-	cy_as_hal_enable_interrupts(int_state);
-
-	/* Create the request to send to the Antioch device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_ENTER_SUSPEND_MODE,
-		CY_RQT_GENERAL_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* Reserve space for the reply, the reply data will not
-	 * exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	/* Wakeup control flags. */
-	value = 0x0001;
-	if (usb_wakeup_en)
-		value |= 0x04;
-	if (gpio_wakeup_en)
-		value |= 0x02;
-	cy_as_ll_request_response__set_word(req_p, 0, value);
-
-	if (cb != 0) {
-
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MISC_ENTERSUSPEND,
-			0, dev_p->func_cbs_misc, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p,
-			cy_as_misc_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-		return CY_AS_ERROR_SUCCESS;
-	} else {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-			CY_RESP_SUCCESS_FAILURE)
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-		else
-			ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	}
-
-destroy:
-	if (ret == CY_AS_ERROR_SUCCESS)
-		cy_as_device_set_suspend_mode(dev_p);
-
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_misc_enter_suspend);
-
-cy_as_return_status_t
-cy_as_misc_leave_suspend(
-		cy_as_device_handle	 handle,
-		cy_as_function_callback cb,
-		uint32_t			 client)
-{
-	cy_as_device *dev_p;
-	uint16_t v, count;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	cy_as_log_debug_message(6, "cy_as_misc_leave_suspend called");
-
-	/* Make sure we have a valid device */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	/* Make sure we are in suspend mode. */
-	if (cy_as_device_is_in_suspend_mode(dev_p)) {
-		if (cb) {
-			cy_as_func_c_b_node *cbnode =
-				cy_as_create_func_c_b_node_data(cb, client,
-				CY_FUNCT_CB_MISC_LEAVESUSPEND, 0);
-			if (cbnode == 0)
-				return CY_AS_ERROR_OUT_OF_MEMORY;
-
-			cy_as_insert_c_b_node(dev_p->func_cbs_misc, cbnode);
-		}
-
-		/*
-		 * do a read from the ID register so that the CE assertion
-		 * will wake west bridge. the read is repeated until the
-		 * read comes back with valid data.
-		 */
-		count = 8;
-
-		v = cy_as_hal_read_register(dev_p->tag,
-				CY_AS_MEM_CM_WB_CFG_ID);
-
-		while (!is_valid_silicon_id(v) && count-- > 0) {
-			cy_as_hal_sleep(CY_AS_LEAVE_STANDBY_DELAY_CLOCK);
-			v = cy_as_hal_read_register(dev_p->tag,
-					CY_AS_MEM_CM_WB_CFG_ID);
-		}
-
-		/*
-		 * if we tried to read the register and could not,
-		 * return a timeout
-		 */
-		if (count == 0)
-			return CY_AS_ERROR_TIMEOUT;
-	} else
-		return CY_AS_ERROR_NOT_IN_SUSPEND;
-
-	if (cb == 0) {
-		/*
-		 * wait until the in suspend mode flag is cleared.
-		 */
-		count = 20;
-		while ((cy_as_device_is_in_suspend_mode(dev_p))
-			&& (count--)) {
-			cy_as_hal_sleep(CY_AS_LEAVE_STANDBY_DELAY_CLOCK);
-		}
-
-		if (cy_as_device_is_in_suspend_mode(dev_p))
-			ret = CY_AS_ERROR_TIMEOUT;
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_misc_leave_suspend);
-
-cy_as_return_status_t
-cy_as_misc_reserve_l_n_a_boot_area(cy_as_device_handle handle,
-						   uint8_t numzones,
-						   cy_as_function_callback cb,
-						   uint32_t client)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_bool standby;
-	cy_as_ll_request_response *req_p, *reply_p;
-
-	cy_as_device *dev_p;
-
-	(void)client;
-
-	cy_as_log_debug_message(6, "cy_as_misc_switch_pnand_mode called");
-
-	/* Make sure we have a valid device */
-	dev_p = (cy_as_device *)handle;
-	cy_as_check_device_ready(dev_p);
-
-	/*
-	* make sure antioch is not in standby
-	*/
-	ret = cy_as_misc_in_standby(dev_p, &standby);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-	if (standby)
-		return CY_AS_ERROR_IN_STANDBY;
-
-	/* Make sure the Antioch is not in suspend mode. */
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_RESERVE_LNA_BOOT_AREA,
-		CY_RQT_GENERAL_RQT_CONTEXT, 1);
-	if (req_p == 0)
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		cy_as_ll_request_response__set_word(req_p,
-			0, (uint16_t)numzones);
-
-	/* Reserve space for the reply, the reply data will not
-	 * exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-			cy_as_ll_destroy_request(dev_p, req_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p,
-				req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-			CY_RESP_SUCCESS_FAILURE) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	} else {
-
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MISC_RESERVELNABOOTAREA,
-			0, dev_p->func_cbs_misc, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_misc_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* The request and response are freed as part of the
-		 * MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_func_c_b_node*
-cy_as_create_func_c_b_node_data(cy_as_function_callback cb,
-					 uint32_t client,
-					 cy_as_funct_c_b_type type,
-					 void *data)
-{
-	uint32_t state = cy_as_hal_disable_interrupts();
-	cy_as_func_c_b_node *node = cy_as_hal_c_b_alloc(
-					sizeof(cy_as_func_c_b_node));
-	cy_as_hal_enable_interrupts(state);
-	if (node != 0) {
-		node->node_type = CYAS_FUNC_CB;
-		node->cb_p = cb;
-		node->client_data = client;
-		node->data_type = type;
-		if (data != 0)
-			node->data_type |= CY_FUNCT_CB_DATA;
-		else
-			node->data_type |= CY_FUNCT_CB_NODATA;
-		node->data = data;
-		node->next_p = 0;
-	}
-	return node;
-}
-
-cy_as_func_c_b_node*
-cy_as_create_func_c_b_node(cy_as_function_callback cb,
-					 uint32_t client)
-{
-	return cy_as_create_func_c_b_node_data(cb, client,
-		CY_FUNCT_CB_NODATA, 0);
-}
-
-void
-cy_as_destroy_func_c_b_node(cy_as_func_c_b_node *node)
-{
-	uint32_t state;
-
-	node->node_type = CYAS_INVALID;
-	state = cy_as_hal_disable_interrupts();
-	cy_as_hal_c_b_free(node);
-	cy_as_hal_enable_interrupts(state);
-}
-
-cy_as_usb_func_c_b_node*
-cy_as_create_usb_func_c_b_node(
-		cy_as_usb_function_callback cb, uint32_t client)
-{
-	uint32_t state = cy_as_hal_disable_interrupts();
-	cy_as_usb_func_c_b_node *node = cy_as_hal_c_b_alloc(
-		sizeof(cy_as_usb_func_c_b_node));
-	cy_as_hal_enable_interrupts(state);
-	if (node != 0) {
-		node->type = CYAS_USB_FUNC_CB;
-		node->cb_p = cb;
-		node->client_data = client;
-		node->next_p = 0;
-	}
-	return node;
-}
-
-void
-cy_as_destroy_usb_func_c_b_node(cy_as_usb_func_c_b_node *node)
-{
-	uint32_t state;
-
-	node->type = CYAS_INVALID;
-	state = cy_as_hal_disable_interrupts();
-	cy_as_hal_c_b_free(node);
-	cy_as_hal_enable_interrupts(state);
-}
-
-cy_as_usb_io_c_b_node*
-cy_as_create_usb_io_c_b_node(cy_as_usb_io_callback cb)
-{
-	uint32_t state = cy_as_hal_disable_interrupts();
-	cy_as_usb_io_c_b_node *node = cy_as_hal_c_b_alloc(
-		sizeof(cy_as_usb_io_c_b_node));
-	cy_as_hal_enable_interrupts(state);
-	if (node != 0) {
-		node->type = CYAS_USB_IO_CB;
-		node->cb_p = cb;
-		node->next_p = 0;
-	}
-	return node;
-}
-
-void
-cy_as_destroy_usb_io_c_b_node(cy_as_usb_io_c_b_node *node)
-{
-	uint32_t state;
-
-	node->type = CYAS_INVALID;
-
-	state = cy_as_hal_disable_interrupts();
-	cy_as_hal_c_b_free(node);
-	cy_as_hal_enable_interrupts(state);
-}
-
-cy_as_storage_io_c_b_node*
-cy_as_create_storage_io_c_b_node(cy_as_storage_callback cb,
-	cy_as_media_type media, uint32_t device_index,
-	uint32_t unit, uint32_t block_addr, cy_as_oper_type oper,
-	cy_as_ll_request_response *req_p,
-	cy_as_ll_request_response *reply_p)
-{
-	uint32_t state = cy_as_hal_disable_interrupts();
-	cy_as_storage_io_c_b_node *node = cy_as_hal_c_b_alloc(
-		sizeof(cy_as_storage_io_c_b_node));
-	cy_as_hal_enable_interrupts(state);
-	if (node != 0) {
-		node->type = CYAS_STORAGE_IO_CB;
-		node->cb_p = cb;
-		node->media = media;
-		node->device_index = device_index;
-		node->unit = unit;
-		node->block_addr = block_addr;
-		node->oper = oper;
-		node->req_p = req_p;
-		node->reply_p = reply_p;
-		node->next_p = 0;
-	}
-	return node;
-}
-
-void
-cy_as_destroy_storage_io_c_b_node(cy_as_storage_io_c_b_node *node)
-{
-	uint32_t state;
-	node->type = CYAS_INVALID;
-	state = cy_as_hal_disable_interrupts();
-	cy_as_hal_c_b_free(node);
-	cy_as_hal_enable_interrupts(state);
-}
-
-cy_as_c_b_queue *
-cy_as_create_c_b_queue(cy_as_c_b_node_type type)
-{
-	uint32_t state = cy_as_hal_disable_interrupts();
-	cy_as_c_b_queue *queue = cy_as_hal_c_b_alloc(
-		sizeof(cy_as_c_b_queue));
-	cy_as_hal_enable_interrupts(state);
-	if (queue) {
-		queue->type = type;
-		queue->head_p = 0;
-		queue->tail_p = 0;
-		queue->count = 0;
-	}
-
-	return queue;
-}
-
-void
-cy_as_destroy_c_b_queue(cy_as_c_b_queue *queue)
-{
-	uint32_t state;
-	queue->type = CYAS_INVALID;
-	queue->head_p = 0;
-	queue->tail_p = 0;
-	queue->count = 0;
-	state = cy_as_hal_disable_interrupts();
-	cy_as_hal_c_b_free(queue);
-	cy_as_hal_enable_interrupts(state);
-}
-
-/* Inserts a CyAsCBNode into the queue, the
- * node type must match the queue type*/
-void
-cy_as_insert_c_b_node(cy_as_c_b_queue *queue_p, void*cbnode)
-{
-	uint32_t int_state;
-
-	int_state = cy_as_hal_disable_interrupts();
-
-	cy_as_hal_assert(queue_p != 0);
-
-	switch (queue_p->type) {
-	case CYAS_USB_FUNC_CB:
-		{
-			cy_as_usb_func_c_b_node *node =
-				(cy_as_usb_func_c_b_node *)cbnode;
-			cy_as_usb_func_c_b_node *tail =
-				(cy_as_usb_func_c_b_node *)queue_p->tail_p;
-
-			cy_as_hal_assert(node->type == CYAS_USB_FUNC_CB);
-			cy_as_hal_assert(tail == 0 ||
-				tail->type == CYAS_USB_FUNC_CB);
-			if (queue_p->head_p == 0)
-				queue_p->head_p = node;
-			else
-				tail->next_p = node;
-
-			queue_p->tail_p = node;
-		}
-		break;
-
-	case CYAS_USB_IO_CB:
-		{
-			cy_as_usb_io_c_b_node *node =
-				(cy_as_usb_io_c_b_node *)cbnode;
-			cy_as_usb_io_c_b_node *tail =
-				(cy_as_usb_io_c_b_node *)queue_p->tail_p;
-
-			cy_as_hal_assert(node->type == CYAS_USB_IO_CB);
-			cy_as_hal_assert(tail == 0 ||
-				tail->type == CYAS_USB_IO_CB);
-			if (queue_p->head_p == 0)
-				queue_p->head_p = node;
-			else
-				tail->next_p = node;
-
-			queue_p->tail_p = node;
-		}
-		break;
-
-	case CYAS_STORAGE_IO_CB:
-		{
-			cy_as_storage_io_c_b_node *node =
-				(cy_as_storage_io_c_b_node *)cbnode;
-			cy_as_storage_io_c_b_node *tail =
-				(cy_as_storage_io_c_b_node *)queue_p->tail_p;
-
-			cy_as_hal_assert(node->type == CYAS_STORAGE_IO_CB);
-			cy_as_hal_assert(tail == 0 ||
-				tail->type == CYAS_STORAGE_IO_CB);
-			if (queue_p->head_p == 0)
-				queue_p->head_p = node;
-			else
-				tail->next_p = node;
-
-				queue_p->tail_p = node;
-		}
-		break;
-
-	case CYAS_FUNC_CB:
-		{
-			cy_as_func_c_b_node *node =
-				(cy_as_func_c_b_node *)cbnode;
-			cy_as_func_c_b_node *tail =
-				(cy_as_func_c_b_node *)queue_p->tail_p;
-
-			cy_as_hal_assert(node->node_type == CYAS_FUNC_CB);
-			cy_as_hal_assert(tail == 0 ||
-				tail->node_type == CYAS_FUNC_CB);
-			if (queue_p->head_p == 0)
-				queue_p->head_p = node;
-			else
-				tail->next_p = node;
-
-				queue_p->tail_p = node;
-		}
-		break;
-
-	default:
-		cy_as_hal_assert(cy_false);
-		break;
-	}
-
-	queue_p->count++;
-
-	cy_as_hal_enable_interrupts(int_state);
-}
-
-/* Removes the tail node from the queue and frees it */
-void
-cy_as_remove_c_b_tail_node(cy_as_c_b_queue *queue_p)
-{
-	uint32_t int_state;
-
-	int_state = cy_as_hal_disable_interrupts();
-
-	if (queue_p->count > 0) {
-		/*
-		 * the worst case length of the queue should be
-		 * under 10 elements, and the average case should
-		 * be just 1 element. so, we just employ a linear
-		 * search to find the node to be freed.
-		 */
-		switch (queue_p->type) {
-		case CYAS_FUNC_CB:
-			{
-				cy_as_func_c_b_node *node =
-					(cy_as_func_c_b_node *)
-					queue_p->head_p;
-				cy_as_func_c_b_node *tail =
-					(cy_as_func_c_b_node *)
-					queue_p->tail_p;
-				if (node != tail) {
-					while (node->next_p != tail)
-						node = node->next_p;
-					node->next_p = 0;
-					queue_p->tail_p = node;
-				}
-				cy_as_destroy_func_c_b_node(tail);
-			}
-			break;
-
-		case CYAS_USB_FUNC_CB:
-			{
-				cy_as_usb_func_c_b_node *node =
-					(cy_as_usb_func_c_b_node *)
-					queue_p->head_p;
-				cy_as_usb_func_c_b_node *tail =
-					(cy_as_usb_func_c_b_node *)
-					queue_p->tail_p;
-				if (node != tail) {
-					while (node->next_p != tail)
-							node = node->next_p;
-						node->next_p = 0;
-						queue_p->tail_p = node;
-				}
-
-				cy_as_destroy_usb_func_c_b_node(tail);
-			}
-			break;
-
-		case CYAS_USB_IO_CB:
-			{
-				cy_as_usb_io_c_b_node *node =
-					(cy_as_usb_io_c_b_node *)
-					queue_p->head_p;
-				cy_as_usb_io_c_b_node *tail =
-					(cy_as_usb_io_c_b_node *)
-					queue_p->tail_p;
-				if (node != tail) {
-					while (node->next_p != tail)
-						node = node->next_p;
-					node->next_p = 0;
-					queue_p->tail_p = node;
-				}
-				cy_as_destroy_usb_io_c_b_node(tail);
-			}
-			break;
-
-		case CYAS_STORAGE_IO_CB:
-			{
-				cy_as_storage_io_c_b_node *node =
-					(cy_as_storage_io_c_b_node *)
-					queue_p->head_p;
-				cy_as_storage_io_c_b_node *tail =
-					(cy_as_storage_io_c_b_node *)
-					queue_p->tail_p;
-				if (node != tail) {
-					while (node->next_p != tail)
-						node = node->next_p;
-					node->next_p = 0;
-					queue_p->tail_p = node;
-				}
-				cy_as_destroy_storage_io_c_b_node(tail);
-			}
-			break;
-
-		default:
-			cy_as_hal_assert(cy_false);
-		}
-
-		queue_p->count--;
-		if (queue_p->count == 0) {
-			queue_p->head_p = 0;
-			queue_p->tail_p = 0;
-		}
-	}
-
-	cy_as_hal_enable_interrupts(int_state);
-}
-
-/* Removes the first CyAsCBNode from the queue and frees it */
-void
-cy_as_remove_c_b_node(cy_as_c_b_queue *queue_p)
-{
-	uint32_t int_state;
-
-	int_state = cy_as_hal_disable_interrupts();
-
-	cy_as_hal_assert(queue_p->count >= 0);
-	if (queue_p->count > 0) {
-		if (queue_p->type == CYAS_USB_FUNC_CB) {
-			cy_as_usb_func_c_b_node *node =
-				(cy_as_usb_func_c_b_node *)
-				queue_p->head_p;
-			queue_p->head_p = node->next_p;
-			cy_as_destroy_usb_func_c_b_node(node);
-		} else if (queue_p->type == CYAS_USB_IO_CB) {
-			cy_as_usb_io_c_b_node *node =
-				(cy_as_usb_io_c_b_node *)
-				queue_p->head_p;
-			queue_p->head_p = node->next_p;
-			cy_as_destroy_usb_io_c_b_node(node);
-		} else if (queue_p->type == CYAS_STORAGE_IO_CB) {
-			cy_as_storage_io_c_b_node *node =
-				(cy_as_storage_io_c_b_node *)
-				queue_p->head_p;
-			queue_p->head_p = node->next_p;
-			cy_as_destroy_storage_io_c_b_node(node);
-		} else if (queue_p->type == CYAS_FUNC_CB) {
-			cy_as_func_c_b_node *node =
-				(cy_as_func_c_b_node *)
-				queue_p->head_p;
-			queue_p->head_p = node->next_p;
-			cy_as_destroy_func_c_b_node(node);
-		} else {
-			cy_as_hal_assert(cy_false);
-		}
-
-		queue_p->count--;
-		if (queue_p->count == 0) {
-			queue_p->head_p = 0;
-			queue_p->tail_p = 0;
-		}
-	}
-
-	cy_as_hal_enable_interrupts(int_state);
-}
-
-void my_print_func_c_b_node(cy_as_func_c_b_node *node)
-{
-	cy_as_funct_c_b_type type =
-		cy_as_funct_c_b_type_get_type(node->data_type);
-	cy_as_hal_print_message("[cd:%2u dt:%2u cb:0x%08x "
-		"d:0x%08x nt:%1i]", node->client_data, type,
-		(uint32_t)node->cb_p, (uint32_t)node->data,
-		node->node_type);
-}
-
-void my_print_c_b_queue(cy_as_c_b_queue *queue_p)
-{
-	uint32_t i = 0;
-
-	cy_as_hal_print_message("| count: %u type: ", queue_p->count);
-
-	if (queue_p->type == CYAS_USB_FUNC_CB) {
-		cy_as_hal_print_message("USB_FUNC_CB\n");
-	} else if (queue_p->type == CYAS_USB_IO_CB) {
-		cy_as_hal_print_message("USB_IO_CB\n");
-	} else if (queue_p->type == CYAS_STORAGE_IO_CB) {
-		cy_as_hal_print_message("STORAGE_IO_CB\n");
-	} else if (queue_p->type == CYAS_FUNC_CB) {
-		cy_as_func_c_b_node *node = queue_p->head_p;
-		cy_as_hal_print_message("FUNC_CB\n");
-		if (queue_p->count > 0) {
-			cy_as_hal_print_message("| head->");
-
-			for (i = 0; i < queue_p->count; i++) {
-				if (node) {
-					cy_as_hal_print_message("->");
-					my_print_func_c_b_node(node);
-					node = node->next_p;
-				} else
-					cy_as_hal_print_message("->[NULL]\n");
-			}
-
-			cy_as_hal_print_message("\n| tail->");
-			my_print_func_c_b_node(queue_p->tail_p);
-			cy_as_hal_print_message("\n");
-		}
-	} else {
-		cy_as_hal_print_message("INVALID\n");
-	}
-
-	cy_as_hal_print_message("|----------\n");
-}
-
-
-/* Removes and frees all pending callbacks */
-void
-cy_as_clear_c_b_queue(cy_as_c_b_queue *queue_p)
-{
-	uint32_t int_state = cy_as_hal_disable_interrupts();
-
-	while (queue_p->count != 0)
-		cy_as_remove_c_b_node(queue_p);
-
-	cy_as_hal_enable_interrupts(int_state);
-}
-
-cy_as_return_status_t
-cy_as_misc_send_request(cy_as_device *dev_p,
-					  cy_as_function_callback cb,
-					  uint32_t client,
-					  cy_as_funct_c_b_type type,
-					  void *data,
-					  cy_as_c_b_queue *queue,
-					  uint16_t req_type,
-					  cy_as_ll_request_response *req_p,
-					  cy_as_ll_request_response *reply_p,
-					  cy_as_response_callback rcb)
-{
-
-	cy_as_func_c_b_node *cbnode = cy_as_create_func_c_b_node_data(cb,
-		client, type, data);
-	cy_as_return_status_t ret;
-
-	if (cbnode == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	else
-		cy_as_insert_c_b_node(queue, cbnode);
-
-	req_p->flags |= req_type;
-
-	ret = cy_as_ll_send_request(dev_p, req_p, reply_p, cy_false, rcb);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		cy_as_remove_c_b_tail_node(queue);
-
-	return ret;
-}
-
-void
-cy_as_misc_cancel_ex_requests(cy_as_device *dev_p)
-{
-	int i;
-	for (i = 0; i < CY_RQT_CONTEXT_COUNT; i++)
-		cy_as_ll_remove_all_requests(dev_p, dev_p->context[i]);
-}
-
-
-static void
-cy_as_misc_func_callback(cy_as_device *dev_p,
-						uint8_t context,
-						cy_as_ll_request_response *rqt,
-						cy_as_ll_request_response *resp,
-						cy_as_return_status_t stat)
-{
-	cy_as_func_c_b_node *node = NULL;
-	cy_as_return_status_t ret;
-
-	cy_bool	ex_request = (rqt->flags & CY_AS_REQUEST_RESPONSE_EX)
-			== CY_AS_REQUEST_RESPONSE_EX;
-	cy_bool	ms_request = (rqt->flags & CY_AS_REQUEST_RESPONSE_MS)
-			== CY_AS_REQUEST_RESPONSE_MS;
-	uint8_t	code;
-	uint32_t type;
-	uint8_t cntxt;
-
-	cy_as_hal_assert(ex_request || ms_request);
-	(void) ex_request;
-	(void) ms_request;
-	(void)context;
-
-	cntxt = cy_as_ll_request_response__get_context(rqt);
-	code = cy_as_ll_request_response__get_code(rqt);
-
-	switch (cntxt) {
-	case CY_RQT_GENERAL_RQT_CONTEXT:
-		cy_as_hal_assert(dev_p->func_cbs_misc->count != 0);
-		cy_as_hal_assert(dev_p->func_cbs_misc->type == CYAS_FUNC_CB);
-		node = (cy_as_func_c_b_node *)dev_p->func_cbs_misc->head_p;
-		type = cy_as_funct_c_b_type_get_type(node->data_type);
-
-		switch (code) {
-		case CY_RQT_GET_FIRMWARE_VERSION:
-			cy_as_hal_assert(node->data != 0);
-			cy_as_hal_assert(type ==
-				CY_FUNCT_CB_MISC_GETFIRMWAREVERSION);
-			ret = my_handle_response_get_firmware_version(dev_p,
-				rqt, resp,
-				(cy_as_get_firmware_version_data *)node->data);
-			break;
-		case CY_RQT_READ_MCU_REGISTER:
-			cy_as_hal_assert(node->data != 0);
-			cy_as_hal_assert(type ==
-				CY_FUNCT_CB_MISC_READMCUREGISTER);
-			ret = my_handle_response_read_m_c_u_register(dev_p, rqt,
-				resp, (uint8_t *)node->data);
-			break;
-		case CY_RQT_GET_GPIO_STATE:
-			cy_as_hal_assert(node->data != 0);
-			cy_as_hal_assert(type ==
-				CY_FUNCT_CB_MISC_GETGPIOVALUE);
-			ret = my_handle_response_get_gpio_value(dev_p, rqt,
-				resp, (uint8_t *)node->data);
-			break;
-		case CY_RQT_SET_SD_CLOCK_FREQ:
-			cy_as_hal_assert(type == CY_FUNCT_CB_MISC_SETSDFREQ);
-			ret = my_handle_response_no_data(dev_p, rqt, resp);
-			break;
-		case CY_RQT_CONTROL_ANTIOCH_HEARTBEAT:
-			cy_as_hal_assert(type ==
-				CY_FUNCT_CB_MISC_HEARTBEATCONTROL);
-			ret = my_handle_response_no_data(dev_p, rqt, resp);
-			break;
-		case CY_RQT_WRITE_MCU_REGISTER:
-			cy_as_hal_assert(type ==
-				CY_FUNCT_CB_MISC_WRITEMCUREGISTER);
-			ret = my_handle_response_no_data(dev_p, rqt, resp);
-			break;
-		case CY_RQT_STORAGE_MEDIA_CHANGED:
-			cy_as_hal_assert(type ==
-				CY_FUNCT_CB_MISC_STORAGECHANGED);
-			ret = my_handle_response_no_data(dev_p, rqt, resp);
-			break;
-		case CY_RQT_SET_GPIO_STATE:
-			cy_as_hal_assert(type ==
-				CY_FUNCT_CB_MISC_SETGPIOVALUE);
-			ret = my_handle_response_no_data(dev_p, rqt, resp);
-			break;
-		case CY_RQT_SET_TRACE_LEVEL:
-			cy_as_hal_assert(type ==
-				CY_FUNCT_CB_MISC_SETTRACELEVEL);
-			ret = my_handle_response_no_data(dev_p, rqt, resp);
-			if (ret == CY_AS_ERROR_INVALID_RESPONSE)
-				ret = CY_AS_ERROR_NOT_SUPPORTED;
-			break;
-		case CY_RQT_PREPARE_FOR_STANDBY:
-			cy_as_hal_assert(type ==
-				CY_FUNCT_CB_MISC_ENTERSTANDBY);
-			ret = my_handle_response_enter_standby(dev_p, rqt, resp,
-				(cy_bool)node->data);
-			break;
-		case CY_RQT_ENTER_SUSPEND_MODE:
-			cy_as_hal_assert(type ==
-				CY_FUNCT_CB_MISC_ENTERSUSPEND);
-			ret = my_handle_response_no_data(dev_p, rqt, resp);
-			if (ret == CY_AS_ERROR_SUCCESS)
-				cy_as_device_set_suspend_mode(dev_p);
-
-			break;
-		case CY_RQT_RESERVE_LNA_BOOT_AREA:
-			cy_as_hal_assert(type ==
-				CY_FUNCT_CB_MISC_RESERVELNABOOTAREA);
-			ret = my_handle_response_no_data(dev_p, rqt, resp);
-			break;
-		case CY_RQT_SDPOLARITY:
-			cy_as_hal_assert(type ==
-				CY_FUNCT_CB_MISC_SETSDPOLARITY);
-			ret = my_handle_response_no_data(dev_p, rqt, resp);
-			break;
-		default:
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			cy_as_hal_assert(cy_false);
-			break;
-		}
-		break;
-
-	case CY_RQT_RESOURCE_RQT_CONTEXT:
-		cy_as_hal_assert(dev_p->func_cbs_res->count != 0);
-		cy_as_hal_assert(dev_p->func_cbs_res->type == CYAS_FUNC_CB);
-		node = (cy_as_func_c_b_node *)dev_p->func_cbs_res->head_p;
-		type = cy_as_funct_c_b_type_get_type(node->data_type);
-
-		switch (code) {
-		case CY_RQT_ACQUIRE_RESOURCE:
-			/* The node->data field is actually an enum value
-			 * which could be 0, thus no assert is done */
-			cy_as_hal_assert(type ==
-				CY_FUNCT_CB_MISC_ACQUIRERESOURCE);
-			ret = my_handle_response_acquire_resource(dev_p, rqt,
-				resp, (cy_as_resource_type *)node->data);
-			break;
-		default:
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			cy_as_hal_assert(cy_false);
-			break;
-		}
-		break;
-
-	default:
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		cy_as_hal_assert(cy_false);
-		break;
-	}
-
-	/*
-	 * if the low level layer returns a direct error, use the
-	 * corresponding error code. if not, use the error code
-	 * based on the response from firmware.
-	 */
-	if (stat == CY_AS_ERROR_SUCCESS)
-		stat = ret;
-
-	/* Call the user Callback */
-	node->cb_p((cy_as_device_handle)dev_p, stat, node->client_data,
-		node->data_type, node->data);
-	if (cntxt == CY_RQT_GENERAL_RQT_CONTEXT)
-		cy_as_remove_c_b_node(dev_p->func_cbs_misc);
-	else
-		cy_as_remove_c_b_node(dev_p->func_cbs_res);
-
-}
-
-
-
-/*[]*/
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasmtp.c b/drivers/staging/westbridge/astoria/api/src/cyasmtp.c
deleted file mode 100644
index 8598364f7ab7..000000000000
--- a/drivers/staging/westbridge/astoria/api/src/cyasmtp.c
+++ /dev/null
@@ -1,1136 +0,0 @@
-/* Cypress West Bridge API header file (cyasmtp.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#include "../../include/linux/westbridge/cyashal.h"
-#include "../../include/linux/westbridge/cyasmtp.h"
-#include "../../include/linux/westbridge/cyaserr.h"
-#include "../../include/linux/westbridge/cyasdma.h"
-#include "../../include/linux/westbridge/cyaslowlevel.h"
-
-static void
-cy_as_mtp_func_callback(cy_as_device *dev_p,
-					uint8_t context,
-					cy_as_ll_request_response *rqt,
-					cy_as_ll_request_response *resp,
-					cy_as_return_status_t stat);
-
-static cy_as_return_status_t
-is_mtp_active(cy_as_device *dev_p)
-{
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	if (!cy_as_device_is_firmware_loaded(dev_p))
-		return CY_AS_ERROR_NO_FIRMWARE;
-
-	if (dev_p->mtp_count == 0)
-		return CY_AS_ERROR_NOT_RUNNING;
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-static void
-my_mtp_request_callback(cy_as_device *dev_p,
-					 uint8_t context,
-					 cy_as_ll_request_response *req_p,
-					 cy_as_ll_request_response *resp_p,
-					 cy_as_return_status_t ret)
-{
-	uint16_t val, ev, status;
-	uint16_t mtp_datalen = 0;
-	uint32_t bytecount_l, bytecount_h;
-	cy_as_mtp_send_object_complete_data send_obj_data;
-	cy_as_mtp_get_object_complete_data  get_obj_data;
-	cy_as_dma_end_point *ep_p;
-
-	uint8_t code = cy_as_ll_request_response__get_code(req_p);
-
-	(void)resp_p;
-	(void)context;
-	(void)ret;
-
-	switch (code) {
-	case CY_RQT_MTP_EVENT:
-		val = cy_as_ll_request_response__get_word(req_p, 0);
-		/* MSB indicates status of read/write */
-		status = (val >> 8) & 0xFF;
-		/* event type */
-		ev =   val & 0xFF;
-		switch (ev) {
-		case 0: /* SendObject Complete */
-			{
-				bytecount_l =
-					cy_as_ll_request_response__get_word
-					(req_p, 1);
-				bytecount_h =
-					cy_as_ll_request_response__get_word
-					(req_p, 2);
-				send_obj_data.byte_count =
-					(bytecount_h << 16) | bytecount_l;
-
-				send_obj_data.status = status;
-
-				/* use the byte count again */
-				bytecount_l =
-					cy_as_ll_request_response__get_word
-					(req_p, 3);
-				bytecount_h =
-					cy_as_ll_request_response__get_word
-					(req_p, 4);
-				send_obj_data.transaction_id =
-					(bytecount_h << 16) | bytecount_l;
-
-				dev_p->mtp_turbo_active = cy_false;
-
-				if (dev_p->mtp_event_cb)
-					dev_p->mtp_event_cb(
-					(cy_as_device_handle) dev_p,
-					cy_as_mtp_send_object_complete,
-						&send_obj_data);
-			}
-			break;
-
-		case 1: /* GetObject Complete */
-			{
-				bytecount_l =
-					cy_as_ll_request_response__get_word
-					(req_p, 1);
-				bytecount_h =
-					cy_as_ll_request_response__get_word
-					(req_p, 2);
-
-				get_obj_data.byte_count =
-					(bytecount_h << 16) | bytecount_l;
-
-				get_obj_data.status = status;
-
-				dev_p->mtp_turbo_active = cy_false;
-
-				if (dev_p->mtp_event_cb)
-					dev_p->mtp_event_cb(
-					(cy_as_device_handle) dev_p,
-					cy_as_mtp_get_object_complete,
-					&get_obj_data);
-			}
-			break;
-
-		case 2: /* BlockTable Needed */
-			{
-				if (dev_p->mtp_event_cb)
-					dev_p->mtp_event_cb(
-					(cy_as_device_handle) dev_p,
-					cy_as_mtp_block_table_needed, 0);
-			}
-			break;
-		default:
-			cy_as_hal_print_message("invalid event type\n");
-			cy_as_ll_send_data_response(dev_p,
-				CY_RQT_TUR_RQT_CONTEXT,
-				CY_RESP_MTP_INVALID_EVENT,
-				sizeof(ev), &ev);
-			break;
-		}
-		break;
-
-	case CY_RQT_TURBO_CMD_FROM_HOST:
-		{
-			mtp_datalen =
-				cy_as_ll_request_response__get_word(req_p, 1);
-
-			/* Get the endpoint pointer based on
-			 * the endpoint number */
-			ep_p = CY_AS_NUM_EP(dev_p, CY_AS_MTP_READ_ENDPOINT);
-
-			/* The event should arrive only after the DMA operation
-			 * has been queued. */
-			cy_as_hal_assert(ep_p->queue_p != 0);
-
-			/* Put the len in ep data information in
-			 * dmaqueue and kick start the queue */
-			cy_as_hal_assert(ep_p->queue_p->size >= mtp_datalen);
-
-			if (mtp_datalen == 0) {
-				cy_as_dma_completed_callback(dev_p->tag,
-					CY_AS_MTP_READ_ENDPOINT, 0,
-					CY_AS_ERROR_SUCCESS);
-			} else {
-				ep_p->maxhwdata = mtp_datalen;
-
-				/*
-				 * make sure that the DMA status for this
-				 * EP is not running, so that the call to
-				 * cy_as_dma_kick_start gets this transfer
-				 * going. note: in MTP mode, we never leave
-				 * a DMA transfer of greater than one packet
-				 * running. so, it is okay to override the
-				 * status here and start the next packet
-				 * transfer.
-				 */
-				cy_as_dma_end_point_set_stopped(ep_p);
-
-				/* Kick start the queue if it is not running */
-				cy_as_dma_kick_start(dev_p,
-					CY_AS_MTP_READ_ENDPOINT);
-			}
-		}
-		break;
-
-	case CY_RQT_TURBO_START_WRITE_DMA:
-		{
-			/*
-			 * now that the firmware is ready to receive the
-			 * next packet of data, start the corresponding
-			 * DMA transfer.  first, ensure that a DMA
-			 * operation is still pending in the queue for the
-			 * write endpoint.
-			 */
-			cy_as_ll_send_status_response(dev_p,
-				CY_RQT_TUR_RQT_CONTEXT,
-				CY_AS_ERROR_SUCCESS, 0);
-
-			ep_p = CY_AS_NUM_EP(dev_p, CY_AS_MTP_WRITE_ENDPOINT);
-			cy_as_hal_assert(ep_p->queue_p != 0);
-
-			cy_as_dma_end_point_set_stopped(ep_p);
-			cy_as_dma_kick_start(dev_p, CY_AS_MTP_WRITE_ENDPOINT);
-		}
-		break;
-
-	default:
-		cy_as_hal_print_message("invalid request received "
-				"on TUR context\n");
-		val = req_p->box0;
-		cy_as_ll_send_data_response(dev_p, CY_RQT_TUR_RQT_CONTEXT,
-			CY_RESP_INVALID_REQUEST, sizeof(val), &val);
-		break;
-	}
-}
-
-static cy_as_return_status_t
-my_handle_response_no_data(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	ret = cy_as_ll_request_response__get_word(reply_p, 0);
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-static cy_as_return_status_t
-my_handle_response_mtp_start(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p,
-			cy_as_return_status_t ret)
-{
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	dev_p->mtp_count++;
-
-	cy_as_dma_enable_end_point(dev_p, CY_AS_MTP_READ_ENDPOINT,
-		cy_true, cy_as_direction_out);
-	dev_p->usb_config[CY_AS_MTP_READ_ENDPOINT].enabled = cy_true;
-	dev_p->usb_config[CY_AS_MTP_READ_ENDPOINT].dir = cy_as_usb_out;
-	dev_p->usb_config[CY_AS_MTP_READ_ENDPOINT].type = cy_as_usb_bulk;
-
-	cy_as_dma_enable_end_point(dev_p, CY_AS_MTP_WRITE_ENDPOINT,
-		cy_true, cy_as_direction_in);
-	dev_p->usb_config[CY_AS_MTP_WRITE_ENDPOINT].enabled = cy_true;
-	dev_p->usb_config[CY_AS_MTP_WRITE_ENDPOINT].dir = cy_as_usb_in;
-	dev_p->usb_config[CY_AS_MTP_WRITE_ENDPOINT].type = cy_as_usb_bulk;
-
-	/* Packet size is 512 bytes */
-	cy_as_dma_set_max_dma_size(dev_p, 0x02, 0x0200);
-	/* Packet size is 64 bytes until a switch to high speed happens.*/
-	cy_as_dma_set_max_dma_size(dev_p, 0x06, 0x40);
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		cy_as_ll_register_request_callback(dev_p,
-			CY_RQT_TUR_RQT_CONTEXT, 0);
-
-	cy_as_device_clear_m_s_s_pending(dev_p);
-
-	return ret;
-}
-
-
-cy_as_return_status_t
-cy_as_mtp_start(cy_as_device_handle handle,
-			 cy_as_mtp_event_callback event_c_b,
-			 cy_as_function_callback cb,
-			 uint32_t client
-			)
-{
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_device *dev_p;
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	if (!cy_as_device_is_firmware_loaded(dev_p))
-		return CY_AS_ERROR_NO_FIRMWARE;
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	if (cy_as_device_is_m_s_s_pending(dev_p))
-		return CY_AS_ERROR_STARTSTOP_PENDING;
-
-	if (dev_p->storage_count == 0)
-		return CY_AS_ERROR_NOT_RUNNING;
-
-	if (dev_p->usb_count == 0)
-		return CY_AS_ERROR_NOT_RUNNING;
-
-	if (dev_p->is_mtp_firmware == 0)
-		return CY_AS_ERROR_NOT_SUPPORTED;
-
-	cy_as_device_set_m_s_s_pending(dev_p);
-
-	if (dev_p->mtp_count == 0) {
-
-		dev_p->mtp_event_cb = event_c_b;
-		/*
-		* we register here because the start request may cause
-		* events to occur before the response to the start request.
-		*/
-		cy_as_ll_register_request_callback(dev_p,
-			CY_RQT_TUR_RQT_CONTEXT, my_mtp_request_callback);
-
-		/* Create the request to send to the West Bridge device */
-		req_p = cy_as_ll_create_request(dev_p,
-			CY_RQT_START_MTP, CY_RQT_TUR_RQT_CONTEXT, 0);
-		if (req_p == 0) {
-			cy_as_device_clear_m_s_s_pending(dev_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-
-		/* Reserve space for the reply, the reply data will
-		 * not exceed one word */
-		reply_p = cy_as_ll_create_response(dev_p, 1);
-		if (reply_p == 0) {
-			cy_as_ll_destroy_request(dev_p, req_p);
-			cy_as_device_clear_m_s_s_pending(dev_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-
-		if (cb == 0) {
-			ret = cy_as_ll_send_request_wait_reply(dev_p,
-				req_p, reply_p);
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			return my_handle_response_mtp_start(dev_p, req_p,
-				reply_p, ret);
-		} else {
-			ret = cy_as_misc_send_request(dev_p, cb, client,
-				CY_FUNCT_CB_MTP_START, 0, dev_p->func_cbs_mtp,
-				CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-				cy_as_mtp_func_callback);
-
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			return ret;
-		}
-
-destroy:
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	} else {
-		dev_p->mtp_count++;
-		if (cb)
-			cb(handle, ret, client, CY_FUNCT_CB_MTP_START, 0);
-	}
-
-	cy_as_device_clear_m_s_s_pending(dev_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_mtp_start);
-
-static cy_as_return_status_t
-my_handle_response_mtp_stop(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p,
-			cy_as_return_status_t ret)
-{
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	/*
-	* we successfully shutdown the stack, so decrement
-	* to make the count zero.
-	*/
-	dev_p->mtp_count--;
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		cy_as_ll_register_request_callback(dev_p,
-			CY_RQT_TUR_RQT_CONTEXT, 0);
-
-	cy_as_device_clear_m_s_s_pending(dev_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_mtp_stop(cy_as_device_handle handle,
-			cy_as_function_callback cb,
-			uint32_t client
-			)
-{
-	cy_as_ll_request_response *req_p = 0, *reply_p = 0;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_mtp_stop called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_mtp_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	if (cy_as_device_is_m_s_s_pending(dev_p))
-		return CY_AS_ERROR_STARTSTOP_PENDING;
-
-	cy_as_device_set_m_s_s_pending(dev_p);
-
-	if (dev_p->mtp_count == 1) {
-		/* Create the request to send to the West
-		 * Bridge device */
-		req_p = cy_as_ll_create_request(dev_p, CY_RQT_STOP_MTP,
-			CY_RQT_TUR_RQT_CONTEXT, 0);
-		if (req_p == 0) {
-			ret = CY_AS_ERROR_OUT_OF_MEMORY;
-			goto destroy;
-		}
-
-		/* Reserve space for the reply, the reply data will
-		 * not exceed one word */
-		reply_p = cy_as_ll_create_response(dev_p, 1);
-		if (reply_p == 0) {
-			ret = CY_AS_ERROR_OUT_OF_MEMORY;
-			goto destroy;
-		}
-
-		if (cb == 0) {
-			ret = cy_as_ll_send_request_wait_reply(dev_p,
-				req_p, reply_p);
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			return my_handle_response_mtp_stop(dev_p, req_p,
-					reply_p, ret);
-		} else {
-			ret = cy_as_misc_send_request(dev_p, cb, client,
-				CY_FUNCT_CB_MTP_STOP, 0, dev_p->func_cbs_mtp,
-				CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-				cy_as_mtp_func_callback);
-
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			return ret;
-		}
-
-destroy:
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	} else if (dev_p->mtp_count > 1) {
-
-		dev_p->mtp_count--;
-
-		if (cb)
-			cb(handle, ret, client, CY_FUNCT_CB_MTP_STOP, 0);
-	}
-
-	cy_as_device_clear_m_s_s_pending(dev_p);
-
-	return ret;
-}
-
-static void
-mtp_write_callback(
-		cy_as_device *dev_p,
-		uint8_t context,
-		cy_as_ll_request_response *rqt,
-		cy_as_ll_request_response *resp,
-		cy_as_return_status_t ret)
-{
-	cy_as_hal_assert(context == CY_RQT_TUR_RQT_CONTEXT);
-
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		if (cy_as_ll_request_response__get_code(resp) !=
-			CY_RESP_SUCCESS_FAILURE)
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-		else
-			ret = cy_as_ll_request_response__get_word(resp, 0);
-	}
-
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		/* Firmware failed the request. Cancel the DMA transfer. */
-		cy_as_dma_cancel(dev_p, 0x04, CY_AS_ERROR_CANCELED);
-		cy_as_device_clear_storage_async_pending(dev_p);
-	}
-
-	cy_as_ll_destroy_response(dev_p, resp);
-	cy_as_ll_destroy_request(dev_p, rqt);
-}
-
-static void
-async_write_request_callback(cy_as_device *dev_p,
-	cy_as_end_point_number_t ep, void *buf_p, uint32_t size,
-	cy_as_return_status_t err)
-{
-	cy_as_device_handle h;
-	cy_as_function_callback cb;
-
-	(void)size;
-	(void)buf_p;
-	(void)ep;
-
-
-	cy_as_log_debug_message(6, "async_write_request_callback called");
-
-	h = (cy_as_device_handle)dev_p;
-
-	cb = dev_p->mtp_cb;
-	dev_p->mtp_cb = 0;
-
-	cy_as_device_clear_storage_async_pending(dev_p);
-
-	if (cb)
-		cb(h, err, dev_p->mtp_client, dev_p->mtp_op, 0);
-
-}
-
-static void
-sync_mtp_callback(cy_as_device *dev_p, cy_as_end_point_number_t ep,
-	void *buf_p, uint32_t size, cy_as_return_status_t err)
-{
-	(void)ep;
-	(void)buf_p;
-	(void)size;
-
-	dev_p->mtp_error = err;
-}
-
-static cy_as_return_status_t
-cy_as_mtp_operation(cy_as_device *dev_p,
-				 cy_as_mtp_block_table *blk_table,
-				 uint32_t num_bytes,
-				 uint32_t transaction_id,
-				 cy_as_function_callback cb,
-				 uint32_t client,
-				 uint8_t rqttype
-				)
-{
-	cy_as_ll_request_response *req_p = 0, *reply_p = 0;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint32_t mask = 0;
-	cy_as_funct_c_b_type mtp_cb_op = 0;
-	uint16_t size = 2;
-
-	if (dev_p->mtp_count == 0)
-		return CY_AS_ERROR_NOT_RUNNING;
-
-	if (rqttype == CY_RQT_INIT_SEND_OBJECT) {
-		mtp_cb_op = CY_FUNCT_CB_MTP_INIT_SEND_OBJECT;
-		dev_p->mtp_turbo_active = cy_true;
-	} else if (rqttype == CY_RQT_INIT_GET_OBJECT) {
-		mtp_cb_op = CY_FUNCT_CB_MTP_INIT_GET_OBJECT;
-		dev_p->mtp_turbo_active = cy_true;
-	} else
-		mtp_cb_op = CY_FUNCT_CB_MTP_SEND_BLOCK_TABLE;
-
-	ret = is_mtp_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (CY_RQT_INIT_GET_OBJECT == rqttype)
-		size = 4;
-
-	/* Create the request to send to the West
-	 * Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, rqttype,
-		CY_RQT_TUR_RQT_CONTEXT, size);
-	if (req_p == 0) {
-		ret = CY_AS_ERROR_OUT_OF_MEMORY;
-		goto destroy;
-	}
-
-	/* Reserve space for the reply, the reply data will
-	 * not exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		ret = CY_AS_ERROR_OUT_OF_MEMORY;
-		goto destroy;
-	}
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		(uint16_t)(num_bytes & 0xFFFF));
-	cy_as_ll_request_response__set_word(req_p, 1,
-		(uint16_t)((num_bytes >> 16) & 0xFFFF));
-
-	/* If it is GET_OBJECT, send transaction id as well*/
-	if (CY_RQT_INIT_GET_OBJECT == rqttype) {
-		cy_as_ll_request_response__set_word(req_p, 2,
-			(uint16_t)(transaction_id & 0xFFFF));
-		cy_as_ll_request_response__set_word(req_p, 3,
-			(uint16_t)((transaction_id >> 16) & 0xFFFF));
-	}
-
-	if (cb == 0) {
-		/* Queue the DMA request for block table write */
-		ret = cy_as_dma_queue_request(dev_p, 4, blk_table,
-			sizeof(cy_as_mtp_block_table), cy_false,
-			cy_false, sync_mtp_callback);
-
-		ret = cy_as_ll_send_request_wait_reply(dev_p,
-			req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS) {
-			cy_as_dma_cancel(dev_p, 4, CY_AS_ERROR_CANCELED);
-			cy_as_device_clear_storage_async_pending(dev_p);
-
-			goto destroy;
-		}
-
-		ret = cy_as_dma_drain_queue(dev_p, 4, cy_true);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		ret = dev_p->mtp_error;
-		goto destroy;
-	} else {
-#if 0
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MTP_INIT_SEND_OBJECT,
-			0, dev_p->func_cbs_mtp, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_mtp_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-#endif
-
-		/* Protection from interrupt driven code */
-		/* since we are using storage EP4 check if any
-		 * storage activity is pending */
-		mask = cy_as_hal_disable_interrupts();
-		if ((cy_as_device_is_storage_async_pending(dev_p)) ||
-			(dev_p->storage_wait)) {
-			cy_as_hal_enable_interrupts(mask);
-			return CY_AS_ERROR_ASYNC_PENDING;
-		}
-		cy_as_device_set_storage_async_pending(dev_p);
-		cy_as_hal_enable_interrupts(mask);
-
-		dev_p->mtp_cb	 = cb;
-		dev_p->mtp_client = client;
-		dev_p->mtp_op	 = mtp_cb_op;
-
-		ret = cy_as_ll_send_request(dev_p, req_p, reply_p,
-			cy_false, mtp_write_callback);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		ret = cy_as_dma_queue_request(dev_p, 4, blk_table,
-			sizeof(cy_as_mtp_block_table), cy_false, cy_false,
-			async_write_request_callback);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			return ret;
-
-		/* Kick start the queue if it is not running */
-		cy_as_dma_kick_start(dev_p, 4);
-
-		return CY_AS_ERROR_SUCCESS;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_mtp_init_send_object(cy_as_device_handle handle,
-					  cy_as_mtp_block_table *blk_table,
-					  uint32_t num_bytes,
-					  cy_as_function_callback cb,
-					  uint32_t client
-					 )
-{
-	cy_as_device *dev_p;
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	return cy_as_mtp_operation(dev_p, blk_table, num_bytes, 0, cb,
-		client, CY_RQT_INIT_SEND_OBJECT);
-
-}
-EXPORT_SYMBOL(cy_as_mtp_init_send_object);
-
-cy_as_return_status_t
-cy_as_mtp_init_get_object(cy_as_device_handle handle,
-					 cy_as_mtp_block_table *blk_table,
-					 uint32_t num_bytes,
-					 uint32_t transaction_id,
-					 cy_as_function_callback cb,
-					 uint32_t client
-					)
-{
-	cy_as_device *dev_p;
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	return cy_as_mtp_operation(dev_p, blk_table, num_bytes,
-		transaction_id, cb, client, CY_RQT_INIT_GET_OBJECT);
-
-}
-EXPORT_SYMBOL(cy_as_mtp_init_get_object);
-
-static cy_as_return_status_t
-my_handle_response_cancel_send_object(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p,
-			cy_as_return_status_t ret)
-{
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_mtp_cancel_send_object(cy_as_device_handle handle,
-						cy_as_function_callback cb,
-						uint32_t client
-						)
-{
-	cy_as_ll_request_response *req_p = 0, *reply_p = 0;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_device *dev_p;
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-		if (dev_p->mtp_count == 0)
-				return CY_AS_ERROR_NOT_RUNNING;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_CANCEL_SEND_OBJECT, CY_RQT_TUR_RQT_CONTEXT, 0);
-	if (req_p == 0) {
-		ret = CY_AS_ERROR_OUT_OF_MEMORY;
-		goto destroy;
-	}
-
-	/* Reserve space for the reply, the reply data will
-	 * not exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		ret = CY_AS_ERROR_OUT_OF_MEMORY;
-		goto destroy;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p,
-			req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_cancel_send_object(dev_p,
-			req_p, reply_p, ret);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MTP_CANCEL_SEND_OBJECT, 0,
-			dev_p->func_cbs_mtp, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_mtp_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_mtp_cancel_send_object);
-
-static cy_as_return_status_t
-my_handle_response_cancel_get_object(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p,
-			cy_as_return_status_t ret)
-{
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_mtp_cancel_get_object(cy_as_device_handle handle,
-					   cy_as_function_callback cb,
-					   uint32_t client
-					  )
-{
-	cy_as_ll_request_response *req_p = 0, *reply_p = 0;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_device *dev_p;
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-		if (dev_p->mtp_count == 0)
-				return CY_AS_ERROR_NOT_RUNNING;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_CANCEL_GET_OBJECT,
-		CY_RQT_TUR_RQT_CONTEXT, 0);
-	if (req_p == 0) {
-		ret = CY_AS_ERROR_OUT_OF_MEMORY;
-		goto destroy;
-	}
-
-	/* Reserve space for the reply, the reply data will
-	 * not exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		ret = CY_AS_ERROR_OUT_OF_MEMORY;
-		goto destroy;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p,
-			req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_cancel_get_object(dev_p,
-			req_p, reply_p, ret);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MTP_CANCEL_GET_OBJECT, 0,
-			dev_p->func_cbs_mtp, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p,  cy_as_mtp_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_mtp_cancel_get_object);
-
-cy_as_return_status_t
-cy_as_mtp_send_block_table(cy_as_device_handle handle,
-			cy_as_mtp_block_table *blk_table,
-			cy_as_function_callback cb,
-			uint32_t client)
-{
-	cy_as_device *dev_p;
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	return cy_as_mtp_operation(dev_p, blk_table, 0, 0, cb,
-		client, CY_RQT_SEND_BLOCK_TABLE);
-}
-
-static void
-cy_as_mtp_func_callback(cy_as_device *dev_p,
-					uint8_t context,
-					cy_as_ll_request_response *rqt,
-					cy_as_ll_request_response *resp,
-					cy_as_return_status_t stat)
-{
-	cy_as_func_c_b_node* node = (cy_as_func_c_b_node *)
-					dev_p->func_cbs_mtp->head_p;
-	cy_as_return_status_t  ret = CY_AS_ERROR_SUCCESS;
-	uint8_t			 code;
-	cy_bool delay_callback = cy_false;
-
-	cy_as_hal_assert(dev_p->func_cbs_mtp->count != 0);
-	cy_as_hal_assert(dev_p->func_cbs_mtp->type == CYAS_FUNC_CB);
-
-	(void)context;
-
-	/* The Handlers are responsible for Deleting the
-	 * rqt and resp when they are finished
-	 */
-	code = cy_as_ll_request_response__get_code(rqt);
-	switch (code) {
-	case CY_RQT_START_MTP:
-		ret = my_handle_response_mtp_start(dev_p, rqt,
-			resp, stat);
-		break;
-	case CY_RQT_STOP_MTP:
-		ret = my_handle_response_mtp_stop(dev_p, rqt,
-			resp, stat);
-		break;
-#if 0
-	case CY_RQT_INIT_SEND_OBJECT:
-		ret = my_handle_response_init_send_object(dev_p,
-			rqt, resp, stat, cy_true);
-		delay_callback = cy_true;
-		break;
-#endif
-	case CY_RQT_CANCEL_SEND_OBJECT:
-		ret = my_handle_response_cancel_send_object(dev_p,
-			rqt, resp, stat);
-		break;
-#if 0
-	case CY_RQT_INIT_GET_OBJECT:
-		ret = my_handle_response_init_get_object(dev_p,
-			rqt, resp, stat, cy_true);
-		delay_callback = cy_true;
-		break;
-#endif
-	case CY_RQT_CANCEL_GET_OBJECT:
-		ret = my_handle_response_cancel_get_object(dev_p,
-			rqt, resp, stat);
-		break;
-#if 0
-	case CY_RQT_SEND_BLOCK_TABLE:
-		ret = my_handle_response_send_block_table(dev_p, rqt,
-			resp, stat, cy_true);
-		delay_callback = cy_true;
-		break;
-#endif
-	case CY_RQT_ENABLE_USB_PATH:
-		ret = my_handle_response_no_data(dev_p, rqt, resp);
-		if (ret == CY_AS_ERROR_SUCCESS)
-			dev_p->is_storage_only_mode = cy_false;
-		break;
-	default:
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		cy_as_hal_assert(cy_false);
-		break;
-	}
-
-	/*
-	* if the low level layer returns a direct error, use the
-	* corresponding error code. if not, use the error code
-	* based on the response from firmware.
-	*/
-	if (stat == CY_AS_ERROR_SUCCESS)
-		stat = ret;
-
-	if (!delay_callback) {
-		node->cb_p((cy_as_device_handle)dev_p, stat, node->client_data,
-			node->data_type, node->data);
-		cy_as_remove_c_b_node(dev_p->func_cbs_mtp);
-	}
-}
-
-cy_as_return_status_t
-cy_as_mtp_storage_only_start(cy_as_device_handle handle)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	if (!cy_as_device_is_firmware_loaded(dev_p))
-		return CY_AS_ERROR_NO_FIRMWARE;
-
-	if (dev_p->storage_count == 0)
-		return CY_AS_ERROR_NOT_RUNNING;
-
-	dev_p->is_storage_only_mode = cy_true;
-	return CY_AS_ERROR_SUCCESS;
-}
-EXPORT_SYMBOL(cy_as_mtp_storage_only_start);
-
-cy_as_return_status_t
-cy_as_mtp_storage_only_stop(cy_as_device_handle handle,
-						cy_as_function_callback cb,
-						uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	if (!cy_as_device_is_firmware_loaded(dev_p))
-		return CY_AS_ERROR_NO_FIRMWARE;
-
-	if (dev_p->storage_count == 0)
-		return CY_AS_ERROR_NOT_RUNNING;
-
-	if (dev_p->is_storage_only_mode == cy_false)
-		return CY_AS_ERROR_SUCCESS;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_ENABLE_USB_PATH, CY_RQT_TUR_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p,
-			req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		ret = my_handle_response_no_data(dev_p, req_p,
-			reply_p);
-		if (ret == CY_AS_ERROR_SUCCESS)
-			dev_p->is_storage_only_mode = cy_false;
-		return ret;
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_MTP_STOP_STORAGE_ONLY, 0,
-			dev_p->func_cbs_mtp, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_mtp_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_mtp_storage_only_stop);
-
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasstorage.c b/drivers/staging/westbridge/astoria/api/src/cyasstorage.c
deleted file mode 100644
index 7abd6a35e828..000000000000
--- a/drivers/staging/westbridge/astoria/api/src/cyasstorage.c
+++ /dev/null
@@ -1,4125 +0,0 @@
-/* Cypress West Bridge API source file (cyasstorage.c)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-/*
-* Storage Design
-*
-* The storage module is fairly straight forward once the
-* DMA and LOWLEVEL modules have been designed.  The
-* storage module simple takes requests from the user, queues
-* the associated DMA requests for action, and then sends
-* the low level requests to the West Bridge firmware.
-*
-*/
-
-#include "../../include/linux/westbridge/cyashal.h"
-#include "../../include/linux/westbridge/cyasstorage.h"
-#include "../../include/linux/westbridge/cyaserr.h"
-#include "../../include/linux/westbridge/cyasdevice.h"
-#include "../../include/linux/westbridge/cyaslowlevel.h"
-#include "../../include/linux/westbridge/cyasdma.h"
-#include "../../include/linux/westbridge/cyasregs.h"
-
-/* Map a pre-V1.2 media type to the V1.2+ bus number */
-cy_as_return_status_t
-cy_an_map_bus_from_media_type(cy_as_device *dev_p,
-	cy_as_media_type type, cy_as_bus_number_t *bus)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint8_t code = (uint8_t)(1 << type);
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	if (!cy_as_device_is_firmware_loaded(dev_p))
-		return CY_AS_ERROR_NO_FIRMWARE;
-
-
-	if (dev_p->media_supported[0] & code) {
-		if (dev_p->media_supported[1] & code) {
-			/*
-			 * this media type could be supported on multiple
-			 * buses. so, report an address resolution error.
-			 */
-			ret = CY_AS_ERROR_ADDRESS_RESOLUTION_ERROR;
-		} else
-			*bus = 0;
-	} else {
-		if (dev_p->media_supported[1] & code)
-			*bus = 1;
-		else
-			ret = CY_AS_ERROR_NO_SUCH_MEDIA;
-	}
-
-	return ret;
-}
-
-static uint16_t
-create_address(cy_as_bus_number_t bus, uint32_t device, uint8_t unit)
-{
-	cy_as_hal_assert(bus >= 0  && bus < CY_AS_MAX_BUSES);
-	cy_as_hal_assert(device < 16);
-
-	return (uint16_t)(((uint8_t)bus << 12) | (device << 8) | unit);
-}
-
-cy_as_media_type
-cy_as_storage_get_media_from_address(uint16_t v)
-{
-	cy_as_media_type media = cy_as_media_max_media_value;
-
-	switch (v & 0xFF) {
-	case 0x00:
-		break;
-	case 0x01:
-		media = cy_as_media_nand;
-		break;
-	case 0x02:
-		media = cy_as_media_sd_flash;
-		break;
-	case 0x04:
-		media = cy_as_media_mmc_flash;
-		break;
-	case 0x08:
-		media = cy_as_media_ce_ata;
-		break;
-	case 0x10:
-		media = cy_as_media_sdio;
-		break;
-	default:
-		cy_as_hal_assert(0);
-			break;
-	}
-
-	return media;
-}
-
-cy_as_bus_number_t
-cy_as_storage_get_bus_from_address(uint16_t v)
-{
-	cy_as_bus_number_t bus = (cy_as_bus_number_t)((v >> 12) & 0x0f);
-	cy_as_hal_assert(bus >= 0 && bus < CY_AS_MAX_BUSES);
-	return bus;
-}
-
-uint32_t
-cy_as_storage_get_device_from_address(uint16_t v)
-{
-	return (uint32_t)((v >> 8) & 0x0f);
-}
-
-static uint8_t
-get_unit_from_address(uint16_t v)
-{
-	return (uint8_t)(v & 0xff);
-}
-
-static cy_as_return_status_t
-cy_as_map_bad_addr(uint16_t val)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_INVALID_RESPONSE;
-
-	switch (val) {
-	case 0:
-		ret = CY_AS_ERROR_NO_SUCH_BUS;
-		break;
-	case 1:
-		ret = CY_AS_ERROR_NO_SUCH_DEVICE;
-		break;
-	case 2:
-		ret = CY_AS_ERROR_NO_SUCH_UNIT;
-		break;
-	case 3:
-		ret = CY_AS_ERROR_INVALID_BLOCK;
-		break;
-	}
-
-	return ret;
-}
-
-static void
-my_storage_request_callback(cy_as_device *dev_p,
-		uint8_t context,
-		cy_as_ll_request_response *req_p,
-		cy_as_ll_request_response *resp_p,
-		cy_as_return_status_t ret)
-{
-	uint16_t val;
-	uint16_t addr;
-	cy_as_bus_number_t bus;
-	uint32_t device;
-	cy_as_device_handle h = (cy_as_device_handle)dev_p;
-	cy_as_dma_end_point *ep_p = NULL;
-
-	(void)resp_p;
-	(void)context;
-	(void)ret;
-
-	switch (cy_as_ll_request_response__get_code(req_p)) {
-	case CY_RQT_MEDIA_CHANGED:
-		cy_as_ll_send_status_response(dev_p,
-			CY_RQT_STORAGE_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 0);
-
-		/* Media has either been inserted or removed */
-		addr = cy_as_ll_request_response__get_word(req_p, 0);
-
-		bus = cy_as_storage_get_bus_from_address(addr);
-		device = cy_as_storage_get_device_from_address(addr);
-
-		/* Clear the entry for this device to force re-query later */
-		cy_as_hal_mem_set(&(dev_p->storage_device_info[bus][device]), 0,
-			sizeof(dev_p->storage_device_info[bus][device]));
-
-		val = cy_as_ll_request_response__get_word(req_p, 1);
-		if (dev_p->storage_event_cb_ms) {
-			if (val == 1)
-				dev_p->storage_event_cb_ms(h, bus,
-					device, cy_as_storage_removed, 0);
-			else
-				dev_p->storage_event_cb_ms(h, bus,
-					device, cy_as_storage_inserted, 0);
-		} else if (dev_p->storage_event_cb) {
-			if (val == 1)
-				dev_p->storage_event_cb(h, bus,
-					cy_as_storage_removed, 0);
-			else
-				dev_p->storage_event_cb(h, bus,
-					cy_as_storage_inserted, 0);
-		}
-
-		break;
-
-	case CY_RQT_ANTIOCH_CLAIM:
-		cy_as_ll_send_status_response(dev_p,
-			CY_RQT_STORAGE_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 0);
-		if (dev_p->storage_event_cb || dev_p->storage_event_cb_ms) {
-			val = cy_as_ll_request_response__get_word(req_p, 0);
-			if (dev_p->storage_event_cb_ms) {
-				if (val & 0x0100)
-					dev_p->storage_event_cb_ms(h, 0, 0,
-						cy_as_storage_antioch, 0);
-				if (val & 0x0200)
-					dev_p->storage_event_cb_ms(h, 1, 0,
-						cy_as_storage_antioch, 0);
-			} else {
-				if (val & 0x01)
-					dev_p->storage_event_cb(h,
-						cy_as_media_nand,
-						cy_as_storage_antioch, 0);
-				if (val & 0x02)
-					dev_p->storage_event_cb(h,
-						cy_as_media_sd_flash,
-						cy_as_storage_antioch, 0);
-				if (val & 0x04)
-					dev_p->storage_event_cb(h,
-						cy_as_media_mmc_flash,
-						cy_as_storage_antioch, 0);
-				if (val & 0x08)
-					dev_p->storage_event_cb(h,
-						cy_as_media_ce_ata,
-						cy_as_storage_antioch, 0);
-			}
-		}
-		break;
-
-	case CY_RQT_ANTIOCH_RELEASE:
-		cy_as_ll_send_status_response(dev_p,
-			CY_RQT_STORAGE_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 0);
-		val = cy_as_ll_request_response__get_word(req_p, 0);
-		if (dev_p->storage_event_cb_ms) {
-			if (val & 0x0100)
-				dev_p->storage_event_cb_ms(h, 0, 0,
-					cy_as_storage_processor, 0);
-			if (val & 0x0200)
-				dev_p->storage_event_cb_ms(h, 1, 0,
-					cy_as_storage_processor, 0);
-		} else if (dev_p->storage_event_cb) {
-			if (val & 0x01)
-				dev_p->storage_event_cb(h,
-					cy_as_media_nand,
-					cy_as_storage_processor, 0);
-			if (val & 0x02)
-				dev_p->storage_event_cb(h,
-					cy_as_media_sd_flash,
-					cy_as_storage_processor, 0);
-			if (val & 0x04)
-				dev_p->storage_event_cb(h,
-					cy_as_media_mmc_flash,
-					cy_as_storage_processor, 0);
-			if (val & 0x08)
-				dev_p->storage_event_cb(h,
-					cy_as_media_ce_ata,
-					cy_as_storage_processor, 0);
-		}
-		break;
-
-
-	case CY_RQT_SDIO_INTR:
-		cy_as_ll_send_status_response(dev_p,
-			CY_RQT_STORAGE_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 0);
-		val = cy_as_ll_request_response__get_word(req_p, 0);
-		if (dev_p->storage_event_cb_ms) {
-			if (val & 0x0100)
-				dev_p->storage_event_cb_ms(h, 1, 0,
-					cy_as_sdio_interrupt, 0);
-			else
-				dev_p->storage_event_cb_ms(h, 0, 0,
-					cy_as_sdio_interrupt, 0);
-
-		} else if (dev_p->storage_event_cb) {
-			dev_p->storage_event_cb(h,
-				cy_as_media_sdio, cy_as_sdio_interrupt, 0);
-		}
-		break;
-
-	case CY_RQT_P2S_DMA_START:
-		/* Do the DMA setup for the waiting operation. */
-		cy_as_ll_send_status_response(dev_p,
-			CY_RQT_STORAGE_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 0);
-		cy_as_device_set_p2s_dma_start_recvd(dev_p);
-		if (dev_p->storage_oper == cy_as_op_read) {
-			ep_p = CY_AS_NUM_EP(dev_p, CY_AS_P2S_READ_ENDPOINT);
-			cy_as_dma_end_point_set_stopped(ep_p);
-			cy_as_dma_kick_start(dev_p, CY_AS_P2S_READ_ENDPOINT);
-		} else {
-			ep_p = CY_AS_NUM_EP(dev_p, CY_AS_P2S_WRITE_ENDPOINT);
-			cy_as_dma_end_point_set_stopped(ep_p);
-			cy_as_dma_kick_start(dev_p, CY_AS_P2S_WRITE_ENDPOINT);
-		}
-		break;
-
-	default:
-		cy_as_hal_print_message("invalid request received "
-			"on storage context\n");
-		val = req_p->box0;
-		cy_as_ll_send_data_response(dev_p, CY_RQT_STORAGE_RQT_CONTEXT,
-			CY_RESP_INVALID_REQUEST, sizeof(val), &val);
-		break;
-	}
-}
-
-static cy_as_return_status_t
-is_storage_active(cy_as_device *dev_p)
-{
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	if (!cy_as_device_is_firmware_loaded(dev_p))
-		return CY_AS_ERROR_NO_FIRMWARE;
-
-	if (dev_p->storage_count == 0)
-		return CY_AS_ERROR_NOT_RUNNING;
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-static void
-cy_as_storage_func_callback(cy_as_device *dev_p,
-					uint8_t context,
-					cy_as_ll_request_response *rqt,
-					cy_as_ll_request_response *resp,
-					cy_as_return_status_t ret);
-
-static cy_as_return_status_t
-my_handle_response_no_data(cy_as_device *dev_p,
-				cy_as_ll_request_response *req_p,
-				cy_as_ll_request_response *reply_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	ret = cy_as_ll_request_response__get_word(reply_p, 0);
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-static cy_as_return_status_t
-my_handle_response_storage_start(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p,
-			cy_as_return_status_t ret)
-{
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	if (dev_p->storage_count > 0 && ret ==
-	CY_AS_ERROR_ALREADY_RUNNING)
-		ret = CY_AS_ERROR_SUCCESS;
-
-	ret = cy_as_dma_enable_end_point(dev_p,
-		CY_AS_P2S_WRITE_ENDPOINT, cy_true, cy_as_direction_in);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	ret = cy_as_dma_set_max_dma_size(dev_p,
-		CY_AS_P2S_WRITE_ENDPOINT, CY_AS_STORAGE_EP_SIZE);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	ret = cy_as_dma_enable_end_point(dev_p,
-		CY_AS_P2S_READ_ENDPOINT, cy_true, cy_as_direction_out);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	ret = cy_as_dma_set_max_dma_size(dev_p,
-		CY_AS_P2S_READ_ENDPOINT, CY_AS_STORAGE_EP_SIZE);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	cy_as_ll_register_request_callback(dev_p,
-		CY_RQT_STORAGE_RQT_CONTEXT, my_storage_request_callback);
-
-	/* Create the request/response used for storage reads and writes. */
-	dev_p->storage_rw_req_p  = cy_as_ll_create_request(dev_p,
-		0, CY_RQT_STORAGE_RQT_CONTEXT, 5);
-	if (dev_p->storage_rw_req_p == 0) {
-		ret = CY_AS_ERROR_OUT_OF_MEMORY;
-		goto destroy;
-	}
-
-	dev_p->storage_rw_resp_p = cy_as_ll_create_response(dev_p, 5);
-	if (dev_p->storage_rw_resp_p == 0) {
-		cy_as_ll_destroy_request(dev_p, dev_p->storage_rw_req_p);
-		ret = CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	/* Increment the storage count only if
-	 * the above functionality succeeds.*/
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		if (dev_p->storage_count == 0) {
-			cy_as_hal_mem_set(dev_p->storage_device_info,
-				0, sizeof(dev_p->storage_device_info));
-			dev_p->is_storage_only_mode = cy_false;
-		}
-
-		dev_p->storage_count++;
-	}
-
-	cy_as_device_clear_s_s_s_pending(dev_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_storage_start(cy_as_device_handle handle,
-				   cy_as_function_callback cb,
-				   uint32_t client)
-{
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	if (!cy_as_device_is_firmware_loaded(dev_p))
-		return CY_AS_ERROR_NO_FIRMWARE;
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	if (cy_as_device_is_s_s_s_pending(dev_p))
-		return CY_AS_ERROR_STARTSTOP_PENDING;
-
-	cy_as_device_set_s_s_s_pending(dev_p);
-
-	if (dev_p->storage_count == 0) {
-		/* Create the request to send to the West Bridge device */
-		req_p = cy_as_ll_create_request(dev_p,
-			CY_RQT_START_STORAGE, CY_RQT_STORAGE_RQT_CONTEXT, 1);
-		if (req_p == 0) {
-			cy_as_device_clear_s_s_s_pending(dev_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-
-		/* Reserve space for the reply, the reply data
-		 * will not exceed one word */
-		reply_p = cy_as_ll_create_response(dev_p, 1);
-		if (reply_p == 0) {
-			cy_as_device_clear_s_s_s_pending(dev_p);
-			cy_as_ll_destroy_request(dev_p, req_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-
-		if (cb == 0) {
-			ret = cy_as_ll_send_request_wait_reply(dev_p,
-				req_p, reply_p);
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			return my_handle_response_storage_start(dev_p,
-				req_p, reply_p, ret);
-		} else {
-			ret = cy_as_misc_send_request(dev_p, cb, client,
-				CY_FUNCT_CB_STOR_START, 0, dev_p->func_cbs_stor,
-				CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-				cy_as_storage_func_callback);
-
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			/* The request and response are freed as
-			 * part of the FuncCallback */
-			return ret;
-		}
-
-destroy:
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	} else {
-		dev_p->storage_count++;
-		if (cb)
-			cb(handle, ret, client, CY_FUNCT_CB_STOR_START, 0);
-	}
-
-	cy_as_device_clear_s_s_s_pending(dev_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_storage_start);
-
-static cy_as_return_status_t
-my_handle_response_storage_stop(cy_as_device *dev_p,
-				cy_as_ll_request_response *req_p,
-				cy_as_ll_request_response *reply_p,
-				cy_as_return_status_t ret)
-{
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		cy_as_ll_destroy_request(dev_p, dev_p->storage_rw_req_p);
-		cy_as_ll_destroy_response(dev_p, dev_p->storage_rw_resp_p);
-		dev_p->storage_count--;
-	}
-
-	cy_as_device_clear_s_s_s_pending(dev_p);
-
-	return ret;
-}
-cy_as_return_status_t
-cy_as_storage_stop(cy_as_device_handle handle,
-				  cy_as_function_callback cb,
-				  uint32_t client)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_storage_async_pending(dev_p))
-		return CY_AS_ERROR_ASYNC_PENDING;
-
-	if (cy_as_device_is_s_s_s_pending(dev_p))
-		return CY_AS_ERROR_STARTSTOP_PENDING;
-
-	cy_as_device_set_s_s_s_pending(dev_p);
-
-	if (dev_p->storage_count == 1) {
-
-		/* Create the request to send to the West Bridge device */
-		req_p = cy_as_ll_create_request(dev_p,
-			CY_RQT_STOP_STORAGE, CY_RQT_STORAGE_RQT_CONTEXT, 0);
-		if (req_p == 0) {
-			cy_as_device_clear_s_s_s_pending(dev_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-
-		/* Reserve space for the reply, the reply data
-		 * will not exceed one word */
-		reply_p = cy_as_ll_create_response(dev_p, 1);
-		if (reply_p == 0) {
-			cy_as_device_clear_s_s_s_pending(dev_p);
-			cy_as_ll_destroy_request(dev_p, req_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-
-		if (cb == 0) {
-			ret = cy_as_ll_send_request_wait_reply(dev_p,
-				req_p, reply_p);
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			return my_handle_response_storage_stop(dev_p,
-				req_p, reply_p, ret);
-		} else {
-			ret = cy_as_misc_send_request(dev_p, cb, client,
-				CY_FUNCT_CB_STOR_STOP, 0, dev_p->func_cbs_stor,
-				CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-				cy_as_storage_func_callback);
-
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			/* The request and response are freed
-			 * as part of the MiscFuncCallback */
-			return ret;
-		}
-
-destroy:
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	} else if (dev_p->storage_count > 1) {
-		dev_p->storage_count--;
-		if (cb)
-			cb(handle, ret, client, CY_FUNCT_CB_STOR_STOP, 0);
-	}
-
-	cy_as_device_clear_s_s_s_pending(dev_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_storage_stop);
-
-cy_as_return_status_t
-cy_as_storage_register_callback(cy_as_device_handle handle,
-	cy_as_storage_event_callback callback)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	if (!cy_as_device_is_firmware_loaded(dev_p))
-		return CY_AS_ERROR_NO_FIRMWARE;
-
-	if (dev_p->storage_count == 0)
-		return CY_AS_ERROR_NOT_RUNNING;
-
-	dev_p->storage_event_cb = NULL;
-	dev_p->storage_event_cb_ms = callback;
-
-	return CY_AS_ERROR_SUCCESS;
-}
-EXPORT_SYMBOL(cy_as_storage_register_callback);
-
-
-static cy_as_return_status_t
-my_handle_response_storage_claim(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (cy_as_ll_request_response__get_code(reply_p) ==
-		CY_RESP_NO_SUCH_ADDRESS) {
-		ret = cy_as_map_bad_addr(
-			cy_as_ll_request_response__get_word(reply_p, 3));
-		goto destroy;
-	}
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_MEDIA_CLAIMED_RELEASED) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	/* The response must be about the address I am
-	 * trying to claim or the firmware is broken */
-	if ((cy_as_storage_get_bus_from_address(
-			cy_as_ll_request_response__get_word(req_p, 0)) !=
-		cy_as_storage_get_bus_from_address(
-			cy_as_ll_request_response__get_word(reply_p, 0))) ||
-		(cy_as_storage_get_device_from_address(
-			cy_as_ll_request_response__get_word(req_p, 0)) !=
-		cy_as_storage_get_device_from_address(
-			cy_as_ll_request_response__get_word(reply_p, 0)))) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	if (cy_as_ll_request_response__get_word(reply_p, 1) != 1)
-		ret = CY_AS_ERROR_NOT_ACQUIRED;
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-static cy_as_return_status_t
-my_storage_claim(cy_as_device *dev_p,
-				void *data,
-				cy_as_bus_number_t bus,
-				uint32_t device,
-				uint16_t req_flags,
-				cy_as_function_callback cb,
-				uint32_t client)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (dev_p->mtp_count > 0)
-		return CY_AS_ERROR_NOT_VALID_IN_MTP;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_CLAIM_STORAGE, CY_RQT_STORAGE_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p,
-		0, create_address(bus, device, 0));
-
-	/* Reserve space for the reply, the reply data will
-	 * not exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 4);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_storage_claim(dev_p, req_p, reply_p);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_STOR_CLAIM, data, dev_p->func_cbs_stor,
-			req_flags, req_p, reply_p,
-			cy_as_storage_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* The request and response are freed as part of
-		 * the MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_storage_claim(cy_as_device_handle handle,
-				   cy_as_bus_number_t bus,
-				   uint32_t device,
-				   cy_as_function_callback cb,
-				   uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (bus < 0 || bus >= CY_AS_MAX_BUSES)
-		return CY_AS_ERROR_NO_SUCH_BUS;
-
-	return my_storage_claim(dev_p, NULL, bus, device,
-		CY_AS_REQUEST_RESPONSE_MS, cb, client);
-}
-EXPORT_SYMBOL(cy_as_storage_claim);
-
-static cy_as_return_status_t
-my_handle_response_storage_release(cy_as_device *dev_p,
-				cy_as_ll_request_response *req_p,
-				cy_as_ll_request_response *reply_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (cy_as_ll_request_response__get_code(reply_p) ==
-		CY_RESP_NO_SUCH_ADDRESS) {
-		ret = cy_as_map_bad_addr(
-			cy_as_ll_request_response__get_word(reply_p, 3));
-		goto destroy;
-	}
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_MEDIA_CLAIMED_RELEASED) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	/* The response must be about the address I am
-	 * trying to release or the firmware is broken */
-	if ((cy_as_storage_get_bus_from_address(
-			cy_as_ll_request_response__get_word(req_p, 0)) !=
-		cy_as_storage_get_bus_from_address(
-			cy_as_ll_request_response__get_word(reply_p, 0))) ||
-		(cy_as_storage_get_device_from_address(
-			cy_as_ll_request_response__get_word(req_p, 0)) !=
-		cy_as_storage_get_device_from_address(
-			cy_as_ll_request_response__get_word(reply_p, 0)))) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-
-	if (cy_as_ll_request_response__get_word(reply_p, 1) != 0)
-		ret = CY_AS_ERROR_NOT_RELEASED;
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-static cy_as_return_status_t
-my_storage_release(cy_as_device *dev_p,
-					void *data,
-					cy_as_bus_number_t bus,
-					uint32_t device,
-					uint16_t req_flags,
-					cy_as_function_callback cb,
-					uint32_t client)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (dev_p->mtp_count > 0)
-		return CY_AS_ERROR_NOT_VALID_IN_MTP;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_RELEASE_STORAGE,
-		CY_RQT_STORAGE_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(
-		req_p, 0, create_address(bus, device, 0));
-
-	/* Reserve space for the reply, the reply
-	 * data will not exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 4);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_storage_release(
-			dev_p, req_p, reply_p);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_STOR_RELEASE, data, dev_p->func_cbs_stor,
-			req_flags, req_p, reply_p,
-			cy_as_storage_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* The request and response are freed as
-		 * part of the MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_storage_release(cy_as_device_handle handle,
-				   cy_as_bus_number_t bus,
-				   uint32_t device,
-				   cy_as_function_callback cb,
-				   uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (bus < 0 || bus >= CY_AS_MAX_BUSES)
-		return CY_AS_ERROR_NO_SUCH_BUS;
-
-	return my_storage_release(dev_p, NULL, bus, device,
-		CY_AS_REQUEST_RESPONSE_MS, cb, client);
-}
-EXPORT_SYMBOL(cy_as_storage_release);
-
-static cy_as_return_status_t
-my_handle_response_storage_query_bus(cy_as_device *dev_p,
-				cy_as_ll_request_response *req_p,
-				cy_as_ll_request_response *reply_p,
-				uint32_t *count)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint8_t code = cy_as_ll_request_response__get_code(reply_p);
-	uint16_t v;
-
-	if (code == CY_RESP_NO_SUCH_ADDRESS) {
-		ret = CY_AS_ERROR_NO_SUCH_BUS;
-		goto destroy;
-	}
-
-	if (code != CY_RESP_BUS_DESCRIPTOR) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	/*
-	 * verify that the response corresponds to the bus that was queried.
-	 */
-	if (cy_as_storage_get_bus_from_address(
-		cy_as_ll_request_response__get_word(req_p, 0)) !=
-		cy_as_storage_get_bus_from_address(
-		cy_as_ll_request_response__get_word(reply_p, 0))) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	v = cy_as_ll_request_response__get_word(reply_p, 1);
-	if (req_p->flags & CY_AS_REQUEST_RESPONSE_MS) {
-		/*
-		 * this request is only for the count of devices
-		 * on the bus. there is no need to check the media type.
-		 */
-		if (v)
-			*count = 1;
-		else
-			*count = 0;
-	} else {
-		/*
-		 * this request is for the count of devices of a
-		 * particular type. we need to check whether the media
-		 * type found matches the queried type.
-		 */
-		cy_as_media_type queried = (cy_as_media_type)
-			cy_as_ll_request_response__get_word(req_p, 1);
-		cy_as_media_type found =
-			cy_as_storage_get_media_from_address(v);
-
-		if (queried == found)
-			*count = 1;
-		else
-			*count = 0;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-my_storage_query_bus(cy_as_device *dev_p,
-						cy_as_bus_number_t bus,
-						cy_as_media_type   type,
-						uint16_t req_flags,
-						uint32_t *count,
-						cy_as_function_callback cb,
-						uint32_t client)
-{
-	cy_as_return_status_t ret;
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_funct_c_b_type cb_type = CY_FUNCT_CB_STOR_QUERYBUS;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/* Create the request to send to the Antioch device */
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_QUERY_BUS, CY_RQT_STORAGE_RQT_CONTEXT, 2);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p,
-		0, create_address(bus, 0, 0));
-	cy_as_ll_request_response__set_word(req_p, 1, (uint16_t)type);
-
-	/* Reserve space for the reply, the reply data
-	 * will not exceed two words. */
-	reply_p = cy_as_ll_create_response(dev_p, 2);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p,
-			req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		req_p->flags |= req_flags;
-		return my_handle_response_storage_query_bus(dev_p,
-			req_p, reply_p, count);
-	} else {
-		if (req_flags == CY_AS_REQUEST_RESPONSE_EX)
-			cb_type = CY_FUNCT_CB_STOR_QUERYMEDIA;
-
-		ret = cy_as_misc_send_request(dev_p, cb, client, cb_type,
-			count, dev_p->func_cbs_stor, req_flags,
-			req_p, reply_p, cy_as_storage_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* The request and response are freed as part of
-		 * the MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_storage_query_bus(cy_as_device_handle handle,
-						cy_as_bus_number_t bus,
-						uint32_t *count,
-						cy_as_function_callback cb,
-						uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	return my_storage_query_bus(dev_p, bus, cy_as_media_max_media_value,
-		CY_AS_REQUEST_RESPONSE_MS, count, cb, client);
-}
-EXPORT_SYMBOL(cy_as_storage_query_bus);
-
-cy_as_return_status_t
-cy_as_storage_query_media(cy_as_device_handle handle,
-						cy_as_media_type type,
-						uint32_t *count,
-						cy_as_function_callback cb,
-						uint32_t client)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_bus_number_t bus;
-
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	ret = cy_an_map_bus_from_media_type(dev_p, type, &bus);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	return my_storage_query_bus(dev_p, bus, type, CY_AS_REQUEST_RESPONSE_EX,
-			count, cb, client);
-}
-EXPORT_SYMBOL(cy_as_storage_query_media);
-
-static cy_as_return_status_t
-my_handle_response_storage_query_device(cy_as_device *dev_p,
-				cy_as_ll_request_response *req_p,
-				cy_as_ll_request_response *reply_p,
-				void *data_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint16_t v;
-	cy_as_bus_number_t bus;
-	cy_as_media_type type;
-	uint32_t device;
-	cy_bool removable;
-	cy_bool writeable;
-	cy_bool locked;
-	uint16_t block_size;
-	uint32_t number_units;
-	uint32_t number_eus;
-
-	if (cy_as_ll_request_response__get_code(reply_p)
-		== CY_RESP_NO_SUCH_ADDRESS) {
-		ret = cy_as_map_bad_addr(
-			cy_as_ll_request_response__get_word(reply_p, 3));
-		goto destroy;
-	}
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-	CY_RESP_DEVICE_DESCRIPTOR) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	/* Unpack the response */
-	v = cy_as_ll_request_response__get_word(reply_p, 0);
-	type = cy_as_storage_get_media_from_address(v);
-	bus  = cy_as_storage_get_bus_from_address(v);
-	device = cy_as_storage_get_device_from_address(v);
-
-	block_size = cy_as_ll_request_response__get_word(reply_p, 1);
-
-	v = cy_as_ll_request_response__get_word(reply_p, 2);
-	removable = (v & 0x8000) ? cy_true : cy_false;
-	writeable = (v & 0x0100) ? cy_true : cy_false;
-	locked = (v & 0x0200) ? cy_true : cy_false;
-	number_units = (v & 0xff);
-
-	number_eus  = (cy_as_ll_request_response__get_word(reply_p, 3) << 16)
-		| cy_as_ll_request_response__get_word(reply_p, 4);
-
-	/* Store the results based on the version of originating function */
-	if (req_p->flags & CY_AS_REQUEST_RESPONSE_MS) {
-		cy_as_storage_query_device_data  *store_p =
-			(cy_as_storage_query_device_data *)data_p;
-
-		/* Make sure the response is about the address we asked
-		 * about - if not, firmware error */
-		if ((bus != store_p->bus) || (device != store_p->device)) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		store_p->desc_p.type = type;
-		store_p->desc_p.removable = removable;
-		store_p->desc_p.writeable = writeable;
-		store_p->desc_p.block_size = block_size;
-		store_p->desc_p.number_units = number_units;
-		store_p->desc_p.locked = locked;
-		store_p->desc_p.erase_unit_size = number_eus;
-		dev_p->storage_device_info[bus][device] = store_p->desc_p;
-	} else {
-		cy_as_storage_query_device_data_dep	*store_p =
-			(cy_as_storage_query_device_data_dep *)data_p;
-
-		/* Make sure the response is about the address we asked
-		 * about - if not, firmware error */
-		if ((type != store_p->type) || (device != store_p->device)) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		store_p->desc_p.type = type;
-		store_p->desc_p.removable = removable;
-		store_p->desc_p.writeable = writeable;
-		store_p->desc_p.block_size = block_size;
-		store_p->desc_p.number_units = number_units;
-		store_p->desc_p.locked = locked;
-		store_p->desc_p.erase_unit_size = number_eus;
-		dev_p->storage_device_info[bus][device] = store_p->desc_p;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-static cy_as_return_status_t
-my_storage_query_device(cy_as_device *dev_p,
-						void *data_p,
-						uint16_t req_flags,
-						cy_as_bus_number_t bus,
-						uint32_t device,
-						cy_as_function_callback cb,
-						uint32_t client)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/* Create the request to send to the Antioch device */
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_QUERY_DEVICE, CY_RQT_STORAGE_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, device, 0));
-
-	/* Reserve space for the reply, the reply data
-	 * will not exceed five words. */
-	reply_p = cy_as_ll_create_response(dev_p, 5);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		req_p->flags |= req_flags;
-		return my_handle_response_storage_query_device(dev_p,
-			req_p, reply_p, data_p);
-	} else {
-
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_STOR_QUERYDEVICE, data_p,
-			dev_p->func_cbs_stor, req_flags, req_p,
-			reply_p, cy_as_storage_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* The request and response are freed as part of the
-		 * MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_storage_query_device(cy_as_device_handle handle,
-			cy_as_storage_query_device_data *data_p,
-			cy_as_function_callback cb,
-			uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	return my_storage_query_device(dev_p, data_p,
-		CY_AS_REQUEST_RESPONSE_MS, data_p->bus,
-			data_p->device, cb, client);
-}
-EXPORT_SYMBOL(cy_as_storage_query_device);
-
-static cy_as_return_status_t
-my_handle_response_storage_query_unit(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p,
-			void *data_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_bus_number_t bus;
-	uint32_t device;
-	uint32_t unit;
-	cy_as_media_type type;
-	uint16_t block_size;
-	uint32_t start_block;
-	uint32_t unit_size;
-	uint16_t v;
-
-	if (cy_as_ll_request_response__get_code(reply_p) ==
-	CY_RESP_NO_SUCH_ADDRESS) {
-		ret = cy_as_map_bad_addr(
-			cy_as_ll_request_response__get_word(reply_p, 3));
-		goto destroy;
-	}
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-	CY_RESP_UNIT_DESCRIPTOR) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	/* Unpack the response */
-	v	  = cy_as_ll_request_response__get_word(reply_p, 0);
-	bus	= cy_as_storage_get_bus_from_address(v);
-	device = cy_as_storage_get_device_from_address(v);
-	unit   = get_unit_from_address(v);
-
-	type   = cy_as_storage_get_media_from_address(
-		cy_as_ll_request_response__get_word(reply_p, 1));
-
-	block_size = cy_as_ll_request_response__get_word(reply_p, 2);
-	start_block = cy_as_ll_request_response__get_word(reply_p, 3)
-		| (cy_as_ll_request_response__get_word(reply_p, 4) << 16);
-	unit_size = cy_as_ll_request_response__get_word(reply_p, 5)
-		| (cy_as_ll_request_response__get_word(reply_p, 6) << 16);
-
-	/* Store the results based on the version of
-	 * originating function */
-	if (req_p->flags & CY_AS_REQUEST_RESPONSE_MS) {
-		cy_as_storage_query_unit_data  *store_p =
-			(cy_as_storage_query_unit_data *)data_p;
-
-		/* Make sure the response is about the address we
-		 * asked about - if not, firmware error */
-		if (bus != store_p->bus || device != store_p->device ||
-		unit != store_p->unit) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		store_p->desc_p.type = type;
-		store_p->desc_p.block_size = block_size;
-		store_p->desc_p.start_block = start_block;
-		store_p->desc_p.unit_size = unit_size;
-	} else {
-		cy_as_storage_query_unit_data_dep *store_p =
-			(cy_as_storage_query_unit_data_dep *)data_p;
-
-		/* Make sure the response is about the media type we asked
-		 * about - if not, firmware error */
-		if ((type != store_p->type) || (device != store_p->device) ||
-		(unit != store_p->unit)) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		store_p->desc_p.type = type;
-		store_p->desc_p.block_size = block_size;
-		store_p->desc_p.start_block = start_block;
-		store_p->desc_p.unit_size = unit_size;
-	}
-
-	dev_p->storage_device_info[bus][device].type = type;
-	dev_p->storage_device_info[bus][device].block_size = block_size;
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-static cy_as_return_status_t
-my_storage_query_unit(cy_as_device *dev_p,
-					void *data_p,
-					uint16_t req_flags,
-					cy_as_bus_number_t bus,
-					uint32_t device,
-					uint32_t unit,
-					cy_as_function_callback cb,
-					uint32_t client)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p,
-	CY_RQT_QUERY_UNIT, CY_RQT_STORAGE_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	if (device > 255)
-		return CY_AS_ERROR_NO_SUCH_DEVICE;
-
-	if (unit > 255)
-		return CY_AS_ERROR_NO_SUCH_UNIT;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, device, (uint8_t)unit));
-
-	/* Reserve space for the reply, the reply data
-	 * will be of seven words. */
-	reply_p = cy_as_ll_create_response(dev_p, 7);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		req_p->flags |= req_flags;
-		return my_handle_response_storage_query_unit(dev_p,
-			req_p, reply_p, data_p);
-	} else {
-
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_STOR_QUERYUNIT, data_p,
-			dev_p->func_cbs_stor, req_flags, req_p, reply_p,
-			cy_as_storage_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* The request and response are freed
-		 * as part of the MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_storage_query_unit(cy_as_device_handle handle,
-				cy_as_storage_query_unit_data *data_p,
-				cy_as_function_callback cb,
-				uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	return my_storage_query_unit(dev_p, data_p, CY_AS_REQUEST_RESPONSE_MS,
-		data_p->bus, data_p->device, data_p->unit, cb, client);
-}
-EXPORT_SYMBOL(cy_as_storage_query_unit);
-
-static cy_as_return_status_t
-cy_as_get_block_size(cy_as_device *dev_p,
-					cy_as_bus_number_t bus,
-					uint32_t device,
-					cy_as_function_callback cb)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_QUERY_DEVICE,
-		CY_RQT_STORAGE_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, device, 0));
-
-	reply_p = cy_as_ll_create_response(dev_p, 4);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p)
-		== CY_RESP_NO_SUCH_ADDRESS) {
-			ret = CY_AS_ERROR_NO_SUCH_BUS;
-			goto destroy;
-		}
-
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_DEVICE_DESCRIPTOR) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		/* Make sure the response is about the media type we asked
-		 * about - if not, firmware error */
-		if ((cy_as_storage_get_bus_from_address
-			(cy_as_ll_request_response__get_word(reply_p, 0))
-			!= bus) || (cy_as_storage_get_device_from_address
-			(cy_as_ll_request_response__get_word(reply_p, 0))
-			!= device)) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-
-		dev_p->storage_device_info[bus][device].block_size =
-			cy_as_ll_request_response__get_word(reply_p, 1);
-	} else
-		ret = CY_AS_ERROR_INVALID_REQUEST;
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-my_storage_device_control(
-		cy_as_device		  *dev_p,
-		cy_as_bus_number_t	  bus,
-		uint32_t			 device,
-		cy_bool			   card_detect_en,
-		cy_bool			   write_prot_en,
-				cy_as_storage_card_detect config_detect,
-		cy_as_function_callback cb,
-		uint32_t			 client)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret;
-	cy_bool use_gpio = cy_false;
-
-	(void)device;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	if (!cy_as_device_is_firmware_loaded(dev_p))
-		return CY_AS_ERROR_NO_FIRMWARE;
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	if (bus < 0 || bus >= CY_AS_MAX_BUSES)
-		return CY_AS_ERROR_NO_SUCH_BUS;
-
-	if (device >= CY_AS_MAX_STORAGE_DEVICES)
-		return CY_AS_ERROR_NO_SUCH_DEVICE;
-
-	/* If SD is not supported on the specified bus,
-	 * then return ERROR */
-	if ((dev_p->media_supported[bus] == 0) ||
-		(dev_p->media_supported[bus] & (1<<cy_as_media_nand)))
-		return CY_AS_ERROR_NOT_SUPPORTED;
-
-	if (config_detect == cy_as_storage_detect_GPIO)
-		use_gpio = cy_true;
-	else if (config_detect == cy_as_storage_detect_SDAT_3)
-		use_gpio = cy_false;
-	else
-		return CY_AS_ERROR_INVALID_PARAMETER;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_SD_INTERFACE_CONTROL, CY_RQT_STORAGE_RQT_CONTEXT, 2);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p,
-		0, create_address(bus, device, 0));
-	cy_as_ll_request_response__set_word(req_p,
-		1, (((uint16_t)card_detect_en << 8) |
-		((uint16_t)use_gpio << 1) | (uint16_t)write_prot_en));
-
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_SUCCESS_FAILURE) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	} else {
-
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_STOR_DEVICECONTROL,
-			0, dev_p->func_cbs_stor, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_storage_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* The request and response are freed as part of the
-		 * MiscFuncCallback */
-		return ret;
-	}
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_storage_device_control(cy_as_device_handle handle,
-					cy_as_bus_number_t bus,
-					uint32_t device,
-					cy_bool card_detect_en,
-					cy_bool write_prot_en,
-					cy_as_storage_card_detect config_detect,
-					cy_as_function_callback cb,
-					uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	return my_storage_device_control(dev_p, bus, device, card_detect_en,
-		write_prot_en, config_detect, cb, client);
-}
-EXPORT_SYMBOL(cy_as_storage_device_control);
-
-static void
-cy_as_async_storage_callback(cy_as_device *dev_p,
-	cy_as_end_point_number_t ep, void *buf_p, uint32_t size,
-	cy_as_return_status_t ret)
-{
-	cy_as_storage_callback_dep cb;
-	cy_as_storage_callback cb_ms;
-
-	(void)size;
-	(void)buf_p;
-	(void)ep;
-
-	cy_as_device_clear_storage_async_pending(dev_p);
-
-	/*
-	* if the LL request callback has already been called,
-	* the user callback has to be called from here.
-	*/
-	if (!dev_p->storage_wait) {
-			cy_as_hal_assert(dev_p->storage_cb != NULL ||
-				dev_p->storage_cb_ms != NULL);
-			cb = dev_p->storage_cb;
-			cb_ms = dev_p->storage_cb_ms;
-
-			dev_p->storage_cb = 0;
-			dev_p->storage_cb_ms = 0;
-
-			if (ret == CY_AS_ERROR_SUCCESS)
-				ret = dev_p->storage_error;
-
-		if (cb_ms) {
-			cb_ms((cy_as_device_handle)dev_p,
-				dev_p->storage_bus_index,
-				dev_p->storage_device_index,
-				dev_p->storage_unit,
-				dev_p->storage_block_addr,
-				dev_p->storage_oper, ret);
-		} else {
-			cb((cy_as_device_handle)dev_p,
-				dev_p->storage_device_info
-				[dev_p->storage_bus_index]
-				[dev_p->storage_device_index].type,
-				dev_p->storage_device_index,
-				dev_p->storage_unit,
-				dev_p->storage_block_addr,
-				dev_p->storage_oper, ret);
-		}
-	} else
-		dev_p->storage_error = ret;
-}
-
-static void
-cy_as_async_storage_reply_callback(
-					cy_as_device *dev_p,
-					uint8_t context,
-					cy_as_ll_request_response *rqt,
-					cy_as_ll_request_response *resp,
-					cy_as_return_status_t ret)
-{
-	cy_as_storage_callback_dep cb;
-	cy_as_storage_callback cb_ms;
-	uint8_t reqtype;
-	(void)rqt;
-	(void)context;
-
-	reqtype = cy_as_ll_request_response__get_code(rqt);
-
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		if (cy_as_ll_request_response__get_code(resp) ==
-			CY_RESP_ANTIOCH_DEFERRED_ERROR) {
-			ret = cy_as_ll_request_response__get_word
-				(resp, 0) & 0x00FF;
-		} else if (cy_as_ll_request_response__get_code(resp) !=
-			CY_RESP_SUCCESS_FAILURE) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-		}
-	}
-
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		if (reqtype == CY_RQT_READ_BLOCK)
-			cy_as_dma_cancel(dev_p,
-				dev_p->storage_read_endpoint, ret);
-		else
-			cy_as_dma_cancel(dev_p,
-				dev_p->storage_write_endpoint, ret);
-	}
-
-	dev_p->storage_wait = cy_false;
-
-	/*
-	* if the DMA callback has already been called, the
-	* user callback has to be called from here.
-	*/
-	if (!cy_as_device_is_storage_async_pending(dev_p)) {
-		cy_as_hal_assert(dev_p->storage_cb != NULL ||
-			dev_p->storage_cb_ms != NULL);
-		cb = dev_p->storage_cb;
-		cb_ms = dev_p->storage_cb_ms;
-
-		dev_p->storage_cb = 0;
-		dev_p->storage_cb_ms = 0;
-
-		if (ret == CY_AS_ERROR_SUCCESS)
-			ret = dev_p->storage_error;
-
-		if (cb_ms) {
-			cb_ms((cy_as_device_handle)dev_p,
-				dev_p->storage_bus_index,
-				dev_p->storage_device_index,
-				dev_p->storage_unit,
-				dev_p->storage_block_addr,
-				dev_p->storage_oper, ret);
-		} else {
-			cb((cy_as_device_handle)dev_p,
-				dev_p->storage_device_info
-				[dev_p->storage_bus_index]
-				[dev_p->storage_device_index].type,
-				dev_p->storage_device_index,
-				dev_p->storage_unit,
-				dev_p->storage_block_addr,
-				dev_p->storage_oper, ret);
-		}
-	} else
-		dev_p->storage_error = ret;
-}
-
-static cy_as_return_status_t
-cy_as_storage_async_oper(cy_as_device *dev_p, cy_as_end_point_number_t ep,
-		uint8_t reqtype, uint16_t req_flags, cy_as_bus_number_t bus,
-		uint32_t device, uint32_t unit, uint32_t block, void *data_p,
-		uint16_t num_blocks, cy_as_storage_callback_dep callback,
-		cy_as_storage_callback callback_ms)
-{
-	uint32_t mask;
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (bus < 0 || bus >= CY_AS_MAX_BUSES)
-		return CY_AS_ERROR_NO_SUCH_BUS;
-
-	if (device >= CY_AS_MAX_STORAGE_DEVICES)
-		return CY_AS_ERROR_NO_SUCH_DEVICE;
-
-	if (unit > 255)
-		return CY_AS_ERROR_NO_SUCH_UNIT;
-
-	/* We are supposed to return success if the number of
-	* blocks is zero
-	*/
-	if (num_blocks == 0) {
-		if (callback_ms)
-			callback_ms((cy_as_device_handle)dev_p,
-				bus, device, unit, block,
-				((reqtype == CY_RQT_WRITE_BLOCK)
-				? cy_as_op_write : cy_as_op_read),
-				CY_AS_ERROR_SUCCESS);
-		else
-			callback((cy_as_device_handle)dev_p,
-				dev_p->storage_device_info[bus][device].type,
-				device, unit, block,
-				((reqtype == CY_RQT_WRITE_BLOCK) ?
-					cy_as_op_write : cy_as_op_read),
-				CY_AS_ERROR_SUCCESS);
-
-		return CY_AS_ERROR_SUCCESS;
-	}
-
-	if (dev_p->storage_device_info[bus][device].block_size == 0)
-			return CY_AS_ERROR_QUERY_DEVICE_NEEDED;
-
-	/*
-	* since async operations can be triggered by interrupt
-	* code, we must insure that we do not get multiple
-	* async operations going at one time and protect this
-	* test and set operation from interrupts. also need to
-	* check for pending async MTP writes
-	*/
-	mask = cy_as_hal_disable_interrupts();
-	if ((cy_as_device_is_storage_async_pending(dev_p)) ||
-	(dev_p->storage_wait) ||
-	(cy_as_device_is_usb_async_pending(dev_p, 6))) {
-		cy_as_hal_enable_interrupts(mask);
-		return CY_AS_ERROR_ASYNC_PENDING;
-	}
-
-	cy_as_device_set_storage_async_pending(dev_p);
-	cy_as_device_clear_p2s_dma_start_recvd(dev_p);
-	cy_as_hal_enable_interrupts(mask);
-
-	/*
-	* storage information about the currently outstanding request
-	*/
-	dev_p->storage_cb = callback;
-	dev_p->storage_cb_ms = callback_ms;
-	dev_p->storage_bus_index = bus;
-	dev_p->storage_device_index = device;
-	dev_p->storage_unit = unit;
-	dev_p->storage_block_addr = block;
-
-	/* Initialise the request to send to the West Bridge. */
-	req_p = dev_p->storage_rw_req_p;
-	cy_as_ll_init_request(req_p, reqtype, CY_RQT_STORAGE_RQT_CONTEXT, 5);
-
-	/* Initialise the space for reply from the West Bridge. */
-	reply_p = dev_p->storage_rw_resp_p;
-	cy_as_ll_init_response(reply_p, 5);
-
-	/* Remember which version of the API originated the request */
-	req_p->flags |= req_flags;
-
-	/* Setup the DMA request and adjust the storage
-	 * operation if we are reading */
-	if (reqtype == CY_RQT_READ_BLOCK) {
-		ret = cy_as_dma_queue_request(dev_p, ep, data_p,
-			dev_p->storage_device_info[bus][device].block_size
-			* num_blocks, cy_false, cy_true,
-			cy_as_async_storage_callback);
-		dev_p->storage_oper = cy_as_op_read;
-	} else if (reqtype == CY_RQT_WRITE_BLOCK) {
-		ret = cy_as_dma_queue_request(dev_p, ep, data_p,
-			dev_p->storage_device_info[bus][device].block_size *
-			num_blocks, cy_false, cy_false,
-			cy_as_async_storage_callback);
-		dev_p->storage_oper = cy_as_op_write;
-	}
-
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_device_clear_storage_async_pending(dev_p);
-		return ret;
-	}
-
-	cy_as_ll_request_response__set_word(req_p,
-		0, create_address(bus, (uint8_t)device, (uint8_t)unit));
-	cy_as_ll_request_response__set_word(req_p,
-		1, (uint16_t)((block >> 16) & 0xffff));
-	cy_as_ll_request_response__set_word(req_p,
-		2, (uint16_t)(block & 0xffff));
-	cy_as_ll_request_response__set_word(req_p,
-		3, (uint16_t)((num_blocks >> 8) & 0x00ff));
-	cy_as_ll_request_response__set_word(req_p,
-		4, (uint16_t)((num_blocks << 8) & 0xff00));
-
-	/* Set the burst mode flag. */
-	if (dev_p->is_storage_only_mode)
-		req_p->data[4] |= 0x0001;
-
-	/* Send the request and wait for completion
-	 * of storage request */
-	dev_p->storage_wait = cy_true;
-	ret = cy_as_ll_send_request(dev_p, req_p, reply_p,
-		cy_true, cy_as_async_storage_reply_callback);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_dma_cancel(dev_p, ep, CY_AS_ERROR_CANCELED);
-		cy_as_device_clear_storage_async_pending(dev_p);
-	}
-
-	return ret;
-}
-
-static void
-cy_as_sync_storage_callback(cy_as_device *dev_p,
-	cy_as_end_point_number_t ep, void *buf_p,
-	uint32_t size, cy_as_return_status_t err)
-{
-	(void)ep;
-	(void)buf_p;
-	(void)size;
-
-	dev_p->storage_error = err;
-}
-
-static void
-cy_as_sync_storage_reply_callback(
-				cy_as_device *dev_p,
-				uint8_t context,
-				cy_as_ll_request_response *rqt,
-				cy_as_ll_request_response *resp,
-				cy_as_return_status_t ret)
-{
-	uint8_t reqtype;
-	(void)rqt;
-
-	reqtype = cy_as_ll_request_response__get_code(rqt);
-
-	if (cy_as_ll_request_response__get_code(resp) ==
-	CY_RESP_ANTIOCH_DEFERRED_ERROR) {
-		ret = cy_as_ll_request_response__get_word(resp, 0) & 0x00FF;
-
-		if (ret != CY_AS_ERROR_SUCCESS) {
-			if (reqtype == CY_RQT_READ_BLOCK)
-				cy_as_dma_cancel(dev_p,
-					dev_p->storage_read_endpoint, ret);
-			else
-				cy_as_dma_cancel(dev_p,
-					dev_p->storage_write_endpoint, ret);
-		}
-	} else if (cy_as_ll_request_response__get_code(resp) !=
-	CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-	}
-
-	dev_p->storage_wait = cy_false;
-	dev_p->storage_error = ret;
-
-	/* Wake any threads/processes that are waiting on
-	 * the read/write completion. */
-	cy_as_hal_wake(&dev_p->context[context]->channel);
-}
-
-static cy_as_return_status_t
-cy_as_storage_sync_oper(cy_as_device *dev_p,
-	cy_as_end_point_number_t ep, uint8_t reqtype,
-	cy_as_bus_number_t bus, uint32_t device,
-	uint32_t unit, uint32_t block, void *data_p,
-	uint16_t num_blocks)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_context *ctxt_p;
-	uint32_t loopcount = 200;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (bus < 0 || bus >= CY_AS_MAX_BUSES)
-		return CY_AS_ERROR_NO_SUCH_BUS;
-
-	if (device >= CY_AS_MAX_STORAGE_DEVICES)
-		return CY_AS_ERROR_NO_SUCH_DEVICE;
-
-	if (unit > 255)
-		return CY_AS_ERROR_NO_SUCH_UNIT;
-
-	if ((cy_as_device_is_storage_async_pending(dev_p)) ||
-		(dev_p->storage_wait))
-		return CY_AS_ERROR_ASYNC_PENDING;
-
-	/* Also need to check for pending Async MTP writes */
-	if (cy_as_device_is_usb_async_pending(dev_p, 6))
-		return CY_AS_ERROR_ASYNC_PENDING;
-
-	/* We are supposed to return success if the number of
-	* blocks is zero
-	*/
-	if (num_blocks == 0)
-		return CY_AS_ERROR_SUCCESS;
-
-	if (dev_p->storage_device_info[bus][device].block_size == 0) {
-		/*
-		* normally, a given device has been queried via
-		* the query device call before a read request is issued.
-		* therefore, this normally will not be run.
-		*/
-		ret = cy_as_get_block_size(dev_p, bus, device, 0);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			return ret;
-	}
-
-	/* Initialise the request to send to the West Bridge. */
-	req_p = dev_p->storage_rw_req_p;
-	cy_as_ll_init_request(req_p, reqtype,
-		CY_RQT_STORAGE_RQT_CONTEXT, 5);
-
-	/* Initialise the space for reply from
-	 * the West Bridge. */
-	reply_p = dev_p->storage_rw_resp_p;
-	cy_as_ll_init_response(reply_p, 5);
-	cy_as_device_clear_p2s_dma_start_recvd(dev_p);
-
-	/* Setup the DMA request */
-	if (reqtype == CY_RQT_READ_BLOCK) {
-		ret = cy_as_dma_queue_request(dev_p, ep, data_p,
-			dev_p->storage_device_info[bus][device].block_size *
-			num_blocks, cy_false,
-			cy_true, cy_as_sync_storage_callback);
-		dev_p->storage_oper = cy_as_op_read;
-	} else if (reqtype == CY_RQT_WRITE_BLOCK) {
-		ret = cy_as_dma_queue_request(dev_p, ep, data_p,
-			dev_p->storage_device_info[bus][device].block_size *
-			num_blocks, cy_false, cy_false,
-			cy_as_sync_storage_callback);
-		dev_p->storage_oper = cy_as_op_write;
-	}
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device, (uint8_t)unit));
-	cy_as_ll_request_response__set_word(req_p, 1,
-		(uint16_t)((block >> 16) & 0xffff));
-	cy_as_ll_request_response__set_word(req_p, 2,
-		(uint16_t)(block & 0xffff));
-	cy_as_ll_request_response__set_word(req_p, 3,
-		(uint16_t)((num_blocks >> 8) & 0x00ff));
-	cy_as_ll_request_response__set_word(req_p, 4,
-		(uint16_t)((num_blocks << 8) & 0xff00));
-
-	/* Set the burst mode flag. */
-	if (dev_p->is_storage_only_mode)
-		req_p->data[4] |= 0x0001;
-
-	/* Send the request and wait for
-	 * completion of storage request */
-	dev_p->storage_wait = cy_true;
-	ret = cy_as_ll_send_request(dev_p, req_p, reply_p, cy_true,
-		cy_as_sync_storage_reply_callback);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_dma_cancel(dev_p, ep, CY_AS_ERROR_CANCELED);
-	} else {
-		/* Setup the DMA request */
-		ctxt_p = dev_p->context[CY_RQT_STORAGE_RQT_CONTEXT];
-		ret = cy_as_dma_drain_queue(dev_p, ep, cy_false);
-
-		while (loopcount-- > 0) {
-			if (dev_p->storage_wait == cy_false)
-				break;
-			cy_as_hal_sleep_on(&ctxt_p->channel, 10);
-		}
-
-		if (dev_p->storage_wait == cy_true) {
-			dev_p->storage_wait = cy_false;
-			cy_as_ll_remove_request(dev_p, ctxt_p, req_p, cy_true);
-			ret = CY_AS_ERROR_TIMEOUT;
-		}
-
-		if (ret == CY_AS_ERROR_SUCCESS)
-			ret = dev_p->storage_error;
-	}
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_storage_read(cy_as_device_handle handle,
-	cy_as_bus_number_t bus, uint32_t device,
-	uint32_t unit, uint32_t block,
-	void *data_p, uint16_t num_blocks)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	return cy_as_storage_sync_oper(dev_p, dev_p->storage_read_endpoint,
-		CY_RQT_READ_BLOCK, bus, device,
-		unit, block, data_p, num_blocks);
-}
-EXPORT_SYMBOL(cy_as_storage_read);
-
-cy_as_return_status_t
-cy_as_storage_write(cy_as_device_handle handle,
-	cy_as_bus_number_t bus, uint32_t device,
-	uint32_t unit, uint32_t block, void *data_p,
-	uint16_t num_blocks)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (dev_p->mtp_turbo_active)
-		return CY_AS_ERROR_NOT_VALID_DURING_MTP;
-
-	return cy_as_storage_sync_oper(dev_p,
-		dev_p->storage_write_endpoint,
-		CY_RQT_WRITE_BLOCK, bus, device,
-		unit, block, data_p, num_blocks);
-}
-EXPORT_SYMBOL(cy_as_storage_write);
-
-cy_as_return_status_t
-cy_as_storage_read_async(cy_as_device_handle handle,
-	cy_as_bus_number_t bus, uint32_t device, uint32_t unit,
-	uint32_t block, void *data_p, uint16_t num_blocks,
-	cy_as_storage_callback callback)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (callback == 0)
-		return CY_AS_ERROR_NULL_CALLBACK;
-
-	return cy_as_storage_async_oper(dev_p,
-		dev_p->storage_read_endpoint, CY_RQT_READ_BLOCK,
-		CY_AS_REQUEST_RESPONSE_MS, bus, device, unit,
-		block, data_p, num_blocks, NULL, callback);
-}
-EXPORT_SYMBOL(cy_as_storage_read_async);
-
-cy_as_return_status_t
-cy_as_storage_write_async(cy_as_device_handle handle,
-	cy_as_bus_number_t bus, uint32_t device, uint32_t unit,
-	uint32_t block, void *data_p, uint16_t num_blocks,
-	cy_as_storage_callback callback)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (callback == 0)
-		return CY_AS_ERROR_NULL_CALLBACK;
-
-	if (dev_p->mtp_turbo_active)
-		return CY_AS_ERROR_NOT_VALID_DURING_MTP;
-
-	return cy_as_storage_async_oper(dev_p,
-		dev_p->storage_write_endpoint, CY_RQT_WRITE_BLOCK,
-		CY_AS_REQUEST_RESPONSE_MS, bus, device, unit, block,
-		data_p, num_blocks, NULL, callback);
-}
-EXPORT_SYMBOL(cy_as_storage_write_async);
-
-static void
-my_storage_cancel_callback(
-		cy_as_device *dev_p,
-		uint8_t context,
-		cy_as_ll_request_response *rqt,
-		cy_as_ll_request_response *resp,
-		cy_as_return_status_t stat)
-{
-	(void)context;
-	(void)stat;
-
-	/* Nothing to do here, except free up the
-	 * request and response structures. */
-	cy_as_ll_destroy_response(dev_p, resp);
-	cy_as_ll_destroy_request(dev_p, rqt);
-}
-
-
-cy_as_return_status_t
-cy_as_storage_cancel_async(cy_as_device_handle handle)
-{
-	cy_as_return_status_t ret;
-	cy_as_ll_request_response *req_p , *reply_p;
-
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (!cy_as_device_is_storage_async_pending(dev_p))
-		return CY_AS_ERROR_ASYNC_NOT_PENDING;
-
-	/*
-	 * create and send a mailbox request to firmware
-	 * asking it to abort processing of the current
-	 * P2S operation. the rest of the cancel processing will be
-	 * driven through the callbacks for the read/write call.
-	 */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_ABORT_P2S_XFER,
-		CY_RQT_GENERAL_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	ret = cy_as_ll_send_request(dev_p, req_p,
-		reply_p, cy_false, my_storage_cancel_callback);
-	if (ret) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	}
-
-	return CY_AS_ERROR_SUCCESS;
-}
-EXPORT_SYMBOL(cy_as_storage_cancel_async);
-
-/*
- * This function does all the API side clean-up associated with
- * CyAsStorageStop, without any communication with the firmware.
- */
-void cy_as_storage_cleanup(cy_as_device *dev_p)
-{
-	if (dev_p->storage_count) {
-		cy_as_ll_destroy_request(dev_p, dev_p->storage_rw_req_p);
-		cy_as_ll_destroy_response(dev_p, dev_p->storage_rw_resp_p);
-		dev_p->storage_count = 0;
-		cy_as_device_clear_scsi_messages(dev_p);
-		cy_as_hal_mem_set(dev_p->storage_device_info,
-			0, sizeof(dev_p->storage_device_info));
-
-		cy_as_device_clear_storage_async_pending(dev_p);
-		dev_p->storage_cb = 0;
-		dev_p->storage_cb_ms = 0;
-		dev_p->storage_wait = cy_false;
-	}
-}
-
-static cy_as_return_status_t
-my_handle_response_sd_reg_read(
-		cy_as_device			   *dev_p,
-		cy_as_ll_request_response	*req_p,
-		cy_as_ll_request_response	*reply_p,
-		cy_as_storage_sd_reg_read_data *info)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint8_t  resp_type, i;
-	uint16_t resp_len;
-	uint8_t  length = info->length;
-	uint8_t *data_p = info->buf_p;
-
-	resp_type = cy_as_ll_request_response__get_code(reply_p);
-	if (resp_type == CY_RESP_SD_REGISTER_DATA) {
-		uint16_t *resp_p = reply_p->data + 1;
-		uint16_t temp;
-
-		resp_len = cy_as_ll_request_response__get_word(reply_p, 0);
-		cy_as_hal_assert(resp_len >= length);
-
-		/*
-		 * copy the values into the output buffer after doing the
-		 * necessary bit shifting. the bit shifting is required because
-		 * the data comes out of the west bridge with a 6 bit offset.
-		 */
-		i = 0;
-		while (length) {
-			temp = ((resp_p[i] << 6) | (resp_p[i + 1] >> 10));
-			i++;
-
-			*data_p++ = (uint8_t)(temp >> 8);
-			length--;
-
-			if (length) {
-				*data_p++ = (uint8_t)(temp & 0xFF);
-				length--;
-			}
-		}
-	} else {
-		if (resp_type == CY_RESP_SUCCESS_FAILURE)
-			ret = cy_as_ll_request_response__get_word(reply_p, 0);
-		else
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-	}
-
-	cy_as_ll_destroy_response(dev_p, reply_p);
-	cy_as_ll_destroy_request(dev_p, req_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_storage_sd_register_read(
-		cy_as_device_handle		  handle,
-		cy_as_bus_number_t		   bus,
-		uint8_t				   device,
-		cy_as_sd_card_reg_type		 reg_type,
-		cy_as_storage_sd_reg_read_data *data_p,
-		cy_as_function_callback	  cb,
-		uint32_t				  client)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint8_t  length;
-
-	/*
-	 * sanity checks required before sending the request to the
-	 * firmware.
-	 */
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (device >= CY_AS_MAX_STORAGE_DEVICES)
-		return CY_AS_ERROR_NO_SUCH_DEVICE;
-
-	if (reg_type > cy_as_sd_reg_CSD)
-		return CY_AS_ERROR_INVALID_PARAMETER;
-
-	/* If SD/MMC media is not supported on the
-	 * addressed bus, return error. */
-	if ((dev_p->media_supported[bus] & (1 << cy_as_media_sd_flash)) == 0)
-		return CY_AS_ERROR_INVALID_PARAMETER;
-
-	/*
-	 * find the amount of data to be returned. this will be the minimum of
-	 * the actual data length, and the length requested.
-	 */
-	switch (reg_type) {
-	case cy_as_sd_reg_OCR:
-		length = CY_AS_SD_REG_OCR_LENGTH;
-		break;
-	case cy_as_sd_reg_CID:
-		length = CY_AS_SD_REG_CID_LENGTH;
-		break;
-	case cy_as_sd_reg_CSD:
-		length = CY_AS_SD_REG_CSD_LENGTH;
-		break;
-
-	default:
-		length = 0;
-		cy_as_hal_assert(0);
-	}
-
-	if (length < data_p->length)
-		data_p->length = length;
-	length = data_p->length;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_SD_REGISTER_READ,
-		CY_RQT_STORAGE_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		(create_address(bus, device, 0) | (uint16_t)reg_type));
-
-	reply_p = cy_as_ll_create_response(dev_p,
-		CY_AS_SD_REG_MAX_RESP_LENGTH);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_sd_reg_read(dev_p,
-			req_p, reply_p, data_p);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_STOR_SDREGISTERREAD, data_p,
-			dev_p->func_cbs_stor, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_storage_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* The request and response are freed as part of the
-		 * MiscFuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_storage_sd_register_read);
-
-cy_as_return_status_t
-cy_as_storage_create_p_partition(
-		/* Handle to the device of interest */
-		cy_as_device_handle		handle,
-		cy_as_bus_number_t		 bus,
-		uint32_t				device,
-		/* of P-port only partition in blocks */
-		uint32_t				size,
-		cy_as_function_callback	cb,
-		uint32_t				client)
-{
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/* Partitions cannot be created or deleted while
-	 * the USB stack is active. */
-	if (dev_p->usb_count)
-		return CY_AS_ERROR_USB_RUNNING;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_PARTITION_STORAGE,
-		CY_RQT_STORAGE_RQT_CONTEXT, 3);
-
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* Reserve space for the reply, the reply
-	 * data will not exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device, 0x00));
-	cy_as_ll_request_response__set_word(req_p, 1,
-		(uint16_t)((size >> 16) & 0xffff));
-	cy_as_ll_request_response__set_word(req_p, 2,
-		(uint16_t)(size & 0xffff));
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_no_data(dev_p, req_p, reply_p);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_STOR_PARTITION, 0, dev_p->func_cbs_stor,
-			CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-			cy_as_storage_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* The request and response are freed as part of the
-		 * FuncCallback */
-		return ret;
-
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_storage_create_p_partition);
-
-cy_as_return_status_t
-cy_as_storage_remove_p_partition(
-		cy_as_device_handle		handle,
-		cy_as_bus_number_t		 bus,
-		uint32_t				device,
-		cy_as_function_callback	cb,
-		uint32_t				client)
-{
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/* Partitions cannot be created or deleted while
-	 * the USB stack is active. */
-	if (dev_p->usb_count)
-		return CY_AS_ERROR_USB_RUNNING;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_PARTITION_ERASE,
-		CY_RQT_STORAGE_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* Reserve space for the reply, the reply
-	 * data will not exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	cy_as_ll_request_response__set_word(req_p,
-		0, create_address(bus, (uint8_t)device, 0x00));
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_no_data(dev_p, req_p, reply_p);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_NODATA, 0, dev_p->func_cbs_stor,
-			CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-			cy_as_storage_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* The request and response are freed
-		 * as part of the FuncCallback */
-		return ret;
-
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_storage_remove_p_partition);
-
-static cy_as_return_status_t
-my_handle_response_get_transfer_amount(cy_as_device *dev_p,
-				cy_as_ll_request_response *req_p,
-				cy_as_ll_request_response *reply_p,
-				cy_as_m_s_c_progress_data *data)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint8_t code = cy_as_ll_request_response__get_code(reply_p);
-	uint16_t v1, v2;
-
-	if (code != CY_RESP_TRANSFER_COUNT) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	v1 = cy_as_ll_request_response__get_word(reply_p, 0);
-	v2 = cy_as_ll_request_response__get_word(reply_p, 1);
-	data->wr_count = (uint32_t)((v1 << 16) | v2);
-
-	v1 = cy_as_ll_request_response__get_word(reply_p, 2);
-	v2 = cy_as_ll_request_response__get_word(reply_p, 3);
-	data->rd_count = (uint32_t)((v1 << 16) | v2);
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_storage_get_transfer_amount(
-		cy_as_device_handle handle,
-		cy_as_bus_number_t  bus,
-		uint32_t device,
-		cy_as_m_s_c_progress_data *data_p,
-		cy_as_function_callback cb,
-		uint32_t client
-	)
-{
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/* Check if the firmware image supports this feature. */
-	if ((dev_p->media_supported[0]) && (dev_p->media_supported[0]
-	== (1 << cy_as_media_nand)))
-		return CY_AS_ERROR_NOT_SUPPORTED;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_GET_TRANSFER_AMOUNT,
-		CY_RQT_STORAGE_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* Reserve space for the reply, the reply data
-	 * will not exceed four words. */
-	reply_p = cy_as_ll_create_response(dev_p, 4);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device, 0x00));
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_get_transfer_amount(dev_p,
-			req_p, reply_p, data_p);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-		CY_FUNCT_CB_STOR_GETTRANSFERAMOUNT, (void *)data_p,
-		dev_p->func_cbs_stor, CY_AS_REQUEST_RESPONSE_EX,
-		req_p, reply_p, cy_as_storage_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* The request and response are freed as part of the
-		 * FuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-
-}
-EXPORT_SYMBOL(cy_as_storage_get_transfer_amount);
-
-cy_as_return_status_t
-cy_as_storage_erase(
-		cy_as_device_handle		handle,
-		cy_as_bus_number_t		 bus,
-		uint32_t				device,
-		uint32_t				erase_unit,
-		uint16_t				num_erase_units,
-		cy_as_function_callback	cb,
-		uint32_t				client
-		)
-{
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_storage_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (bus < 0 || bus >= CY_AS_MAX_BUSES)
-		return CY_AS_ERROR_NO_SUCH_BUS;
-
-	if (device >= CY_AS_MAX_STORAGE_DEVICES)
-		return CY_AS_ERROR_NO_SUCH_DEVICE;
-
-	if (dev_p->storage_device_info[bus][device].block_size == 0)
-		return CY_AS_ERROR_QUERY_DEVICE_NEEDED;
-
-	/* If SD is not supported on the specified bus, then return ERROR */
-	if (dev_p->storage_device_info[bus][device].type !=
-		cy_as_media_sd_flash)
-		return CY_AS_ERROR_NOT_SUPPORTED;
-
-	if (num_erase_units == 0)
-		return CY_AS_ERROR_SUCCESS;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_ERASE,
-		CY_RQT_STORAGE_RQT_CONTEXT, 5);
-
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* Reserve space for the reply, the reply
-	 * data will not exceed four words. */
-	reply_p = cy_as_ll_create_response(dev_p, 4);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device, 0x00));
-	cy_as_ll_request_response__set_word(req_p, 1,
-		(uint16_t)((erase_unit >> 16) & 0xffff));
-	cy_as_ll_request_response__set_word(req_p, 2,
-		(uint16_t)(erase_unit & 0xffff));
-	cy_as_ll_request_response__set_word(req_p, 3,
-		(uint16_t)((num_erase_units >> 8) & 0x00ff));
-	cy_as_ll_request_response__set_word(req_p, 4,
-		(uint16_t)((num_erase_units << 8) & 0xff00));
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		ret = my_handle_response_no_data(dev_p, req_p, reply_p);
-
-		/* If error = "invalid response", this (very likely) means
-		 * that we are not using the SD-only firmware module which
-		 * is the only one supporting storage_erase. in this case
-		 * force a "non supported" error code */
-		if (ret == CY_AS_ERROR_INVALID_RESPONSE)
-			ret = CY_AS_ERROR_NOT_SUPPORTED;
-
-		return ret;
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_STOR_ERASE, 0, dev_p->func_cbs_stor,
-			CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-			cy_as_storage_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* The request and response are freed
-		 * as part of the FuncCallback */
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_storage_erase);
-
-static void
-cy_as_storage_func_callback(cy_as_device *dev_p,
-						uint8_t context,
-						cy_as_ll_request_response *rqt,
-						cy_as_ll_request_response *resp,
-						cy_as_return_status_t stat)
-{
-	cy_as_func_c_b_node *node = (cy_as_func_c_b_node *)
-		dev_p->func_cbs_stor->head_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	cy_bool	ex_request = (rqt->flags & CY_AS_REQUEST_RESPONSE_EX)
-			== CY_AS_REQUEST_RESPONSE_EX;
-	cy_bool	ms_request = (rqt->flags & CY_AS_REQUEST_RESPONSE_MS)
-			== CY_AS_REQUEST_RESPONSE_MS;
-	uint8_t	code;
-	uint8_t	cntxt;
-
-	cy_as_hal_assert(ex_request || ms_request);
-	cy_as_hal_assert(dev_p->func_cbs_stor->count != 0);
-	cy_as_hal_assert(dev_p->func_cbs_stor->type == CYAS_FUNC_CB);
-	(void) ex_request;
-	(void) ms_request;
-
-	(void)context;
-
-	cntxt = cy_as_ll_request_response__get_context(rqt);
-	cy_as_hal_assert(cntxt == CY_RQT_STORAGE_RQT_CONTEXT);
-
-	code = cy_as_ll_request_response__get_code(rqt);
-	switch (code) {
-	case CY_RQT_START_STORAGE:
-		ret = my_handle_response_storage_start(dev_p, rqt, resp, stat);
-		break;
-	case CY_RQT_STOP_STORAGE:
-		ret = my_handle_response_storage_stop(dev_p, rqt, resp, stat);
-		break;
-	case CY_RQT_CLAIM_STORAGE:
-		ret = my_handle_response_storage_claim(dev_p, rqt, resp);
-		break;
-	case CY_RQT_RELEASE_STORAGE:
-		ret = my_handle_response_storage_release(dev_p, rqt, resp);
-		break;
-	case CY_RQT_QUERY_MEDIA:
-		cy_as_hal_assert(cy_false);/* Not used any more. */
-		break;
-	case CY_RQT_QUERY_BUS:
-		cy_as_hal_assert(node->data != 0);
-		ret = my_handle_response_storage_query_bus(dev_p,
-			rqt, resp, (uint32_t *)node->data);
-		break;
-	case CY_RQT_QUERY_DEVICE:
-		cy_as_hal_assert(node->data != 0);
-		ret = my_handle_response_storage_query_device(dev_p,
-			rqt, resp, node->data);
-		break;
-	case CY_RQT_QUERY_UNIT:
-		cy_as_hal_assert(node->data != 0);
-		ret = my_handle_response_storage_query_unit(dev_p,
-			rqt, resp, node->data);
-		break;
-	case CY_RQT_SD_INTERFACE_CONTROL:
-		ret = my_handle_response_no_data(dev_p, rqt, resp);
-		break;
-	case CY_RQT_SD_REGISTER_READ:
-		cy_as_hal_assert(node->data != 0);
-		ret = my_handle_response_sd_reg_read(dev_p, rqt, resp,
-			(cy_as_storage_sd_reg_read_data *)node->data);
-		break;
-	case CY_RQT_PARTITION_STORAGE:
-		ret = my_handle_response_no_data(dev_p, rqt, resp);
-		break;
-	case CY_RQT_PARTITION_ERASE:
-		ret = my_handle_response_no_data(dev_p, rqt, resp);
-		break;
-	case CY_RQT_GET_TRANSFER_AMOUNT:
-		cy_as_hal_assert(node->data != 0);
-		ret = my_handle_response_get_transfer_amount(dev_p,
-			rqt, resp, (cy_as_m_s_c_progress_data *)node->data);
-		break;
-	case CY_RQT_ERASE:
-		ret = my_handle_response_no_data(dev_p, rqt, resp);
-
-		/* If error = "invalid response", this (very likely)
-		 * means that we are not using the SD-only firmware
-		 * module which is the only one supporting storage_erase.
-		 * in this case force a "non supported" error code */
-		if (ret == CY_AS_ERROR_INVALID_RESPONSE)
-			ret = CY_AS_ERROR_NOT_SUPPORTED;
-
-		break;
-
-	default:
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		cy_as_hal_assert(cy_false);
-		break;
-	}
-
-	/*
-	 * if the low level layer returns a direct error, use the
-	 * corresponding error code. if not, use the error code
-	 * based on the response from firmware.
-	 */
-	if (stat == CY_AS_ERROR_SUCCESS)
-		stat = ret;
-
-	/* Call the user callback, if there is one */
-	if (node->cb_p)
-		node->cb_p((cy_as_device_handle)dev_p, stat,
-			node->client_data, node->data_type, node->data);
-	cy_as_remove_c_b_node(dev_p->func_cbs_stor);
-}
-
-
-static void
-cy_as_sdio_sync_reply_callback(
-		cy_as_device *dev_p,
-		uint8_t context,
-		cy_as_ll_request_response *rqt,
-		cy_as_ll_request_response *resp,
-		cy_as_return_status_t ret)
-{
-	(void)rqt;
-
-	if ((cy_as_ll_request_response__get_code(resp) ==
-	CY_RESP_SDIO_GET_TUPLE) ||
-	(cy_as_ll_request_response__get_code(resp) ==
-	CY_RESP_SDIO_EXT)) {
-		ret = cy_as_ll_request_response__get_word(resp, 0);
-		if ((ret & 0x00FF) != CY_AS_ERROR_SUCCESS) {
-			if (cy_as_ll_request_response__get_code(rqt) ==
-			CY_RQT_SDIO_READ_EXTENDED)
-				cy_as_dma_cancel(dev_p,
-					dev_p->storage_read_endpoint, ret);
-			else
-				cy_as_dma_cancel(dev_p,
-					dev_p->storage_write_endpoint, ret);
-		}
-	} else {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-	}
-
-	dev_p->storage_rw_resp_p = resp;
-	dev_p->storage_wait = cy_false;
-	if (((ret & 0x00FF) == CY_AS_ERROR_IO_ABORTED) || ((ret & 0x00FF)
-	== CY_AS_ERROR_IO_SUSPENDED))
-		dev_p->storage_error =  (ret & 0x00FF);
-	else
-		dev_p->storage_error = (ret & 0x00FF) ?
-		CY_AS_ERROR_INVALID_RESPONSE : CY_AS_ERROR_SUCCESS;
-
-	/* Wake any threads/processes that are waiting on
-	 * the read/write completion. */
-	cy_as_hal_wake(&dev_p->context[context]->channel);
-}
-
-cy_as_return_status_t
-cy_as_sdio_device_check(
-		cy_as_device *dev_p,
-		cy_as_bus_number_t	 bus,
-		uint32_t			device)
-{
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (bus < 0 || bus >= CY_AS_MAX_BUSES)
-		return CY_AS_ERROR_NO_SUCH_BUS;
-
-	if (device >= CY_AS_MAX_STORAGE_DEVICES)
-		return CY_AS_ERROR_NO_SUCH_DEVICE;
-
-	if (!cy_as_device_is_astoria_dev(dev_p))
-		return CY_AS_ERROR_NOT_SUPPORTED;
-
-	return  (is_storage_active(dev_p));
-}
-
-cy_as_return_status_t
-cy_as_sdio_direct_io(
-		cy_as_device_handle	handle,
-		cy_as_bus_number_t	 bus,
-		uint32_t			device,
-		uint8_t			 n_function_no,
-		uint32_t			address,
-		uint8_t			 misc_buf,
-		uint16_t			argument,
-		uint8_t			 is_write,
-		uint8_t *data_p)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint16_t resp_data;
-
-	/*
-	 * sanity checks required before sending the request to the
-	 * firmware.
-	 */
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	ret = cy_as_sdio_device_check(dev_p, bus, device);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-
-	if (!(cy_as_sdio_check_function_initialized(handle,
-		bus, n_function_no)))
-		return CY_AS_ERROR_INVALID_FUNCTION;
-	if (cy_as_sdio_check_function_suspended(handle, bus, n_function_no))
-		return CY_AS_ERROR_FUNCTION_SUSPENDED;
-
-	req_p = cy_as_ll_create_request(dev_p, (is_write == cy_true) ?
-		CY_RQT_SDIO_WRITE_DIRECT : CY_RQT_SDIO_READ_DIRECT,
-			CY_RQT_STORAGE_RQT_CONTEXT, 3);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/*Setting up request*/
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device, n_function_no));
-	/* D1 */
-	if (is_write == cy_true) {
-		cy_as_ll_request_response__set_word(req_p, 1,
-			((argument<<8) | 0x0080 | (n_function_no<<4) |
-			((misc_buf&CY_SDIO_RAW)<<3) |
-			((misc_buf&CY_SDIO_REARM_INT)>>5) |
-			(uint16_t)(address>>15)));
-	} else {
-		cy_as_ll_request_response__set_word(req_p, 1,
-			(n_function_no<<4) | ((misc_buf&CY_SDIO_REARM_INT)>>5) |
-			(uint16_t)(address>>15));
-	}
-	/* D2 */
-	cy_as_ll_request_response__set_word(req_p, 2,
-		((uint16_t)((address&0x00007fff)<<1)));
-
-	/*Create response*/
-	reply_p = cy_as_ll_create_response(dev_p, 2);
-
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	/*Sending the request*/
-	ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	/*Check reply type*/
-	if (cy_as_ll_request_response__get_code(reply_p) ==
-	CY_RESP_SDIO_DIRECT) {
-		resp_data = cy_as_ll_request_response__get_word(reply_p, 0);
-		if (resp_data >> 8)
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-		else if (data_p != 0)
-			*(uint8_t *)(data_p) = (uint8_t)(resp_data&0x00ff);
-	} else {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-	}
-
-destroy:
-	if (req_p != 0)
-		cy_as_ll_destroy_request(dev_p, req_p);
-	if (reply_p != 0)
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	return ret;
-}
-
-
-cy_as_return_status_t
-cy_as_sdio_direct_read(
-		cy_as_device_handle handle,
-		cy_as_bus_number_t bus,
-		uint32_t device,
-		uint8_t	n_function_no,
-		uint32_t address,
-		uint8_t	misc_buf,
-		uint8_t *data_p)
-{
-	return cy_as_sdio_direct_io(handle, bus, device, n_function_no,
-		address, misc_buf, 0x00, cy_false, data_p);
-}
-EXPORT_SYMBOL(cy_as_sdio_direct_read);
-
-cy_as_return_status_t
-cy_as_sdio_direct_write(
-		cy_as_device_handle		handle,
-		cy_as_bus_number_t		 bus,
-		uint32_t				device,
-		uint8_t				 n_function_no,
-		uint32_t				address,
-		uint8_t				 misc_buf,
-		uint16_t				argument,
-		uint8_t *data_p)
-{
-	return cy_as_sdio_direct_io(handle, bus, device, n_function_no,
-		address, misc_buf, argument, cy_true, data_p);
-}
-EXPORT_SYMBOL(cy_as_sdio_direct_write);
-
-/*Cmd53 IO*/
-cy_as_return_status_t
-cy_as_sdio_extended_i_o(
-		cy_as_device_handle		handle,
-		cy_as_bus_number_t		 bus,
-		uint32_t				device,
-		uint8_t				 n_function_no,
-		uint32_t				address,
-		uint8_t				 misc_buf,
-		uint16_t				argument,
-		uint8_t				 is_write,
-		uint8_t *data_p ,
-		uint8_t				 is_resume)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint8_t resp_type;
-	uint8_t reqtype;
-	uint16_t resp_data;
-	cy_as_context *ctxt_p;
-	uint32_t  dmasize, loopcount = 200;
-	cy_as_end_point_number_t ep;
-
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	ret = cy_as_sdio_device_check(dev_p, bus, device);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (!(cy_as_sdio_check_function_initialized(handle,
-		bus, n_function_no)))
-		return CY_AS_ERROR_INVALID_FUNCTION;
-	if (cy_as_sdio_check_function_suspended(handle, bus, n_function_no))
-		return CY_AS_ERROR_FUNCTION_SUSPENDED;
-
-
-	if ((cy_as_device_is_storage_async_pending(dev_p)) ||
-	(dev_p->storage_wait))
-		return CY_AS_ERROR_ASYNC_PENDING;
-
-	/* Request for 0 bytes of blocks is returned as a success*/
-	if (argument == 0)
-		return CY_AS_ERROR_SUCCESS;
-
-	/* Initialise the request to send to the West Bridge device. */
-	if (is_write == cy_true) {
-		reqtype = CY_RQT_SDIO_WRITE_EXTENDED;
-		ep = dev_p->storage_write_endpoint;
-	} else {
-		reqtype = CY_RQT_SDIO_READ_EXTENDED;
-		ep = dev_p->storage_read_endpoint;
-	}
-
-	req_p = dev_p->storage_rw_req_p;
-	cy_as_ll_init_request(req_p, reqtype, CY_RQT_STORAGE_RQT_CONTEXT, 3);
-
-	/* Initialise the space for reply from the Antioch. */
-	reply_p = dev_p->storage_rw_resp_p;
-	cy_as_ll_init_response(reply_p, 2);
-
-	/* Setup the DMA request */
-	if (!(misc_buf&CY_SDIO_BLOCKMODE)) {
-		if (argument >
-			dev_p->sdiocard[bus].
-			function[n_function_no-1].blocksize)
-			return CY_AS_ERROR_INVALID_BLOCKSIZE;
-
-	} else {
-		if (argument > 511)
-			return CY_AS_ERROR_INVALID_BLOCKSIZE;
-	}
-
-	if (argument == 512)
-		argument = 0;
-
-	dmasize = ((misc_buf&CY_SDIO_BLOCKMODE) != 0) ?
-		dev_p->sdiocard[bus].function[n_function_no-1].blocksize
-		* argument : argument;
-
-	ret = cy_as_dma_queue_request(dev_p, ep, (void *)(data_p),
-		dmasize, cy_false, (is_write & cy_true) ? cy_false :
-		cy_true, cy_as_sync_storage_callback);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device,
-		n_function_no | ((is_resume) ? 0x80 : 0x00)));
-	cy_as_ll_request_response__set_word(req_p, 1,
-		((uint16_t)n_function_no)<<12|
-		((uint16_t)(misc_buf & (CY_SDIO_BLOCKMODE|CY_SDIO_OP_INCR)))
-		<< 9 | (uint16_t)(address >> 7) |
-		((is_write == cy_true) ? 0x8000 : 0x0000));
-	cy_as_ll_request_response__set_word(req_p, 2,
-		((uint16_t)(address&0x0000ffff) << 9) |  argument);
-
-
-	/* Send the request and wait for completion of storage request */
-	dev_p->storage_wait = cy_true;
-	ret = cy_as_ll_send_request(dev_p, req_p, reply_p,
-		cy_true, cy_as_sdio_sync_reply_callback);
-
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_dma_cancel(dev_p, ep, CY_AS_ERROR_CANCELED);
-	} else {
-		/* Setup the DMA request */
-		ctxt_p = dev_p->context[CY_RQT_STORAGE_RQT_CONTEXT];
-		ret = cy_as_dma_drain_queue(dev_p, ep, cy_true);
-
-		while (loopcount-- > 0) {
-			if (dev_p->storage_wait == cy_false)
-				break;
-			cy_as_hal_sleep_on(&ctxt_p->channel, 10);
-		}
-		if (dev_p->storage_wait == cy_true) {
-			dev_p->storage_wait = cy_false;
-			cy_as_ll_remove_request(dev_p, ctxt_p, req_p, cy_true);
-			dev_p->storage_error = CY_AS_ERROR_TIMEOUT;
-		}
-
-		ret = dev_p->storage_error;
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			return ret;
-
-		resp_type = cy_as_ll_request_response__get_code(
-			dev_p->storage_rw_resp_p);
-		if (resp_type == CY_RESP_SDIO_EXT) {
-			resp_data = cy_as_ll_request_response__get_word
-				(reply_p, 0)&0x00ff;
-			if (resp_data)
-				ret = CY_AS_ERROR_INVALID_REQUEST;
-
-		} else {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-		}
-	}
-	return ret;
-
-}
-
-static void
-cy_as_sdio_async_reply_callback(
-		cy_as_device	*dev_p,
-		uint8_t				 context,
-		cy_as_ll_request_response *rqt,
-		cy_as_ll_request_response *resp,
-		cy_as_return_status_t	  ret)
-{
-	cy_as_storage_callback cb_ms;
-	uint8_t reqtype;
-	uint32_t pendingblocks;
-	(void)rqt;
-	(void)context;
-
-	pendingblocks = 0;
-	reqtype = cy_as_ll_request_response__get_code(rqt);
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		if ((cy_as_ll_request_response__get_code(resp) ==
-		CY_RESP_SUCCESS_FAILURE) ||
-		(cy_as_ll_request_response__get_code(resp) ==
-		CY_RESP_SDIO_EXT)) {
-			ret = cy_as_ll_request_response__get_word(resp, 0);
-			ret &= 0x00FF;
-		} else {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-		}
-	}
-
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		if (reqtype == CY_RQT_SDIO_READ_EXTENDED)
-			cy_as_dma_cancel(dev_p,
-				dev_p->storage_read_endpoint, ret);
-		else
-			cy_as_dma_cancel(dev_p,
-				dev_p->storage_write_endpoint, ret);
-
-		dev_p->storage_error = ret;
-	}
-
-	dev_p->storage_wait = cy_false;
-
-	/*
-	 * if the DMA callback has already been called,
-	 * the user callback has to be called from here.
-	 */
-	if (!cy_as_device_is_storage_async_pending(dev_p)) {
-		cy_as_hal_assert(dev_p->storage_cb_ms != NULL);
-		cb_ms = dev_p->storage_cb_ms;
-
-		dev_p->storage_cb = 0;
-		dev_p->storage_cb_ms = 0;
-
-		if ((ret == CY_AS_ERROR_SUCCESS) ||
-		(ret == CY_AS_ERROR_IO_ABORTED) ||
-		(ret == CY_AS_ERROR_IO_SUSPENDED)) {
-			ret = dev_p->storage_error;
-			pendingblocks = ((uint32_t)
-				cy_as_ll_request_response__get_word
-				(resp, 1)) << 16;
-		} else
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-
-		cb_ms((cy_as_device_handle)dev_p, dev_p->storage_bus_index,
-			dev_p->storage_device_index,
-			(dev_p->storage_unit | pendingblocks),
-			dev_p->storage_block_addr, dev_p->storage_oper, ret);
-	} else
-		dev_p->storage_error = ret;
-}
-
-
-cy_as_return_status_t
-cy_as_sdio_extended_i_o_async(
-		cy_as_device_handle			handle,
-		cy_as_bus_number_t			 bus,
-		uint32_t					device,
-		uint8_t					 n_function_no,
-		uint32_t					address,
-		uint8_t					 misc_buf,
-		uint16_t					argument,
-		uint8_t					 is_write,
-		uint8_t					*data_p,
-		cy_as_storage_callback	   callback)
-{
-
-	uint32_t mask;
-	uint32_t dmasize;
-	cy_as_ll_request_response *req_p , *reply_p;
-	uint8_t reqtype;
-	cy_as_end_point_number_t ep;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	ret = cy_as_sdio_device_check(dev_p, bus, device);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (!(cy_as_sdio_check_function_initialized(handle,
-		bus, n_function_no)))
-		return CY_AS_ERROR_INVALID_FUNCTION;
-	if (cy_as_sdio_check_function_suspended(handle, bus, n_function_no))
-		return CY_AS_ERROR_FUNCTION_SUSPENDED;
-
-	if (callback == 0)
-		return CY_AS_ERROR_NULL_CALLBACK;
-
-	/* We are supposed to return success if the number of
-	 * blocks is zero
-	 */
-	if (((misc_buf&CY_SDIO_BLOCKMODE) != 0) && (argument == 0)) {
-		callback(handle, bus, device, n_function_no, address,
-			((is_write) ? cy_as_op_write : cy_as_op_read),
-			CY_AS_ERROR_SUCCESS);
-		return CY_AS_ERROR_SUCCESS;
-	}
-
-
-	/*
-	 * since async operations can be triggered by interrupt
-	 * code, we must insure that we do not get multiple async
-	 * operations going at one time and protect this test and
-	 * set operation from interrupts.
-	 */
-	mask = cy_as_hal_disable_interrupts();
-	if ((cy_as_device_is_storage_async_pending(dev_p)) ||
-	(dev_p->storage_wait)) {
-		cy_as_hal_enable_interrupts(mask);
-		return CY_AS_ERROR_ASYNC_PENDING;
-	}
-	cy_as_device_set_storage_async_pending(dev_p);
-	cy_as_hal_enable_interrupts(mask);
-
-
-	/*
-	 * storage information about the currently
-	 * outstanding request
-	 */
-	dev_p->storage_cb_ms = callback;
-	dev_p->storage_bus_index = bus;
-	dev_p->storage_device_index = device;
-	dev_p->storage_unit = n_function_no;
-	dev_p->storage_block_addr = address;
-
-	if (is_write == cy_true) {
-		reqtype = CY_RQT_SDIO_WRITE_EXTENDED;
-		ep = dev_p->storage_write_endpoint;
-	} else {
-		reqtype = CY_RQT_SDIO_READ_EXTENDED;
-		ep = dev_p->storage_read_endpoint;
-	}
-
-	/* Initialise the request to send to the West Bridge. */
-	req_p = dev_p->storage_rw_req_p;
-	cy_as_ll_init_request(req_p, reqtype,
-		CY_RQT_STORAGE_RQT_CONTEXT, 3);
-
-	/* Initialise the space for reply from the West Bridge. */
-	reply_p = dev_p->storage_rw_resp_p;
-	cy_as_ll_init_response(reply_p, 2);
-
-	if (!(misc_buf&CY_SDIO_BLOCKMODE)) {
-		if (argument >
-		dev_p->sdiocard[bus].function[n_function_no-1].blocksize)
-			return CY_AS_ERROR_INVALID_BLOCKSIZE;
-
-	} else {
-		if (argument > 511)
-			return CY_AS_ERROR_INVALID_BLOCKSIZE;
-	}
-
-	if (argument == 512)
-		argument = 0;
-	dmasize = ((misc_buf&CY_SDIO_BLOCKMODE) != 0) ?
-		dev_p->sdiocard[bus].function[n_function_no-1].blocksize *
-		argument : argument;
-
-	/* Setup the DMA request and adjust the storage
-	 * operation if we are reading */
-	if (reqtype == CY_RQT_SDIO_READ_EXTENDED) {
-		ret = cy_as_dma_queue_request(dev_p, ep,
-			(void *)data_p, dmasize , cy_false, cy_true,
-			cy_as_async_storage_callback);
-		dev_p->storage_oper = cy_as_op_read;
-	} else if (reqtype == CY_RQT_SDIO_WRITE_EXTENDED) {
-		ret = cy_as_dma_queue_request(dev_p, ep, (void *)data_p,
-		dmasize, cy_false, cy_false, cy_as_async_storage_callback);
-		dev_p->storage_oper = cy_as_op_write;
-	}
-
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_device_clear_storage_async_pending(dev_p);
-		return ret;
-	}
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device, n_function_no));
-	cy_as_ll_request_response__set_word(req_p, 1,
-		((uint16_t)n_function_no) << 12 |
-		((uint16_t)(misc_buf & (CY_SDIO_BLOCKMODE | CY_SDIO_OP_INCR)))
-		<< 9 | (uint16_t)(address>>7) |
-		((is_write == cy_true) ? 0x8000 : 0x0000));
-	cy_as_ll_request_response__set_word(req_p, 2,
-		((uint16_t)(address&0x0000ffff) << 9) |  argument);
-
-
-	/* Send the request and wait for completion of storage request */
-	dev_p->storage_wait = cy_true;
-	ret = cy_as_ll_send_request(dev_p, req_p, reply_p, cy_true,
-		cy_as_sdio_async_reply_callback);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_dma_cancel(dev_p, ep, CY_AS_ERROR_CANCELED);
-		cy_as_device_clear_storage_async_pending(dev_p);
-	} else {
-		cy_as_dma_kick_start(dev_p, ep);
-	}
-
-	return ret;
-}
-
-/* CMD53 Extended Read*/
-cy_as_return_status_t
-cy_as_sdio_extended_read(
-		cy_as_device_handle			handle,
-		cy_as_bus_number_t			 bus,
-		uint32_t					device,
-		uint8_t					 n_function_no,
-		uint32_t					address,
-		uint8_t					 misc_buf,
-		uint16_t					argument,
-		uint8_t					*data_p,
-		cy_as_sdio_callback			callback)
-{
-	if (callback == 0)
-		return cy_as_sdio_extended_i_o(handle, bus, device,
-			n_function_no, address, misc_buf, argument,
-			cy_false, data_p, 0);
-
-	return cy_as_sdio_extended_i_o_async(handle, bus, device,
-		n_function_no, address, misc_buf, argument, cy_false,
-		data_p, callback);
-}
-EXPORT_SYMBOL(cy_as_sdio_extended_read);
-
-/* CMD53 Extended Write*/
-cy_as_return_status_t
-cy_as_sdio_extended_write(
-		cy_as_device_handle			handle,
-		cy_as_bus_number_t			 bus,
-		uint32_t					device,
-		uint8_t					 n_function_no,
-		uint32_t					address,
-		uint8_t					 misc_buf,
-		uint16_t					argument,
-		uint8_t					*data_p,
-		cy_as_sdio_callback			callback)
-{
-	if (callback == 0)
-		return cy_as_sdio_extended_i_o(handle, bus, device,
-			n_function_no, address, misc_buf, argument, cy_true,
-			data_p, 0);
-
-	return cy_as_sdio_extended_i_o_async(handle, bus, device,
-		n_function_no, address, misc_buf, argument, cy_true,
-		data_p, callback);
-}
-EXPORT_SYMBOL(cy_as_sdio_extended_write);
-
-/* Read the CIS info tuples for the given function and Tuple ID*/
-cy_as_return_status_t
-cy_as_sdio_get_c_i_s_info(
-		cy_as_device_handle			handle,
-		cy_as_bus_number_t			 bus,
-		uint32_t					device,
-		uint8_t					 n_function_no,
-		uint16_t					tuple_id,
-		uint8_t					*data_p)
-{
-
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint16_t resp_data;
-	cy_as_context *ctxt_p;
-	uint32_t loopcount = 200;
-
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	ret = cy_as_sdio_device_check(dev_p, bus, device);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (!(cy_as_sdio_check_function_initialized(handle, bus, 0)))
-		return CY_AS_ERROR_INVALID_FUNCTION;
-
-	if ((cy_as_device_is_storage_async_pending(dev_p)) ||
-	(dev_p->storage_wait))
-		return CY_AS_ERROR_ASYNC_PENDING;
-
-
-	/* Initialise the request to send to the Antioch. */
-	req_p = dev_p->storage_rw_req_p;
-	cy_as_ll_init_request(req_p, CY_RQT_SDIO_GET_TUPLE,
-		CY_RQT_STORAGE_RQT_CONTEXT, 2);
-
-	/* Initialise the space for reply from the Antioch. */
-	reply_p = dev_p->storage_rw_resp_p;
-	cy_as_ll_init_response(reply_p, 3);
-
-	/* Setup the DMA request */
-	ret = cy_as_dma_queue_request(dev_p, dev_p->storage_read_endpoint,
-		data_p+1, 255, cy_false, cy_true, cy_as_sync_storage_callback);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device, n_function_no));
-
-	/* Set tuple id to fetch. */
-	cy_as_ll_request_response__set_word(req_p, 1, tuple_id<<8);
-
-	/* Send the request and wait for completion of storage request */
-	dev_p->storage_wait = cy_true;
-	ret = cy_as_ll_send_request(dev_p, req_p, reply_p, cy_true,
-		cy_as_sdio_sync_reply_callback);
-
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_dma_cancel(dev_p,
-			dev_p->storage_read_endpoint, CY_AS_ERROR_CANCELED);
-	} else {
-		/* Setup the DMA request */
-		ctxt_p = dev_p->context[CY_RQT_STORAGE_RQT_CONTEXT];
-		ret = cy_as_dma_drain_queue(dev_p,
-			dev_p->storage_read_endpoint, cy_true);
-
-		while (loopcount-- > 0) {
-			if (dev_p->storage_wait == cy_false)
-				break;
-			cy_as_hal_sleep_on(&ctxt_p->channel, 10);
-		}
-
-		if (dev_p->storage_wait == cy_true) {
-			dev_p->storage_wait = cy_false;
-			cy_as_ll_remove_request(dev_p, ctxt_p, req_p, cy_true);
-			return CY_AS_ERROR_TIMEOUT;
-		}
-		ret = dev_p->storage_error;
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			return ret;
-
-		if (cy_as_ll_request_response__get_code
-		(dev_p->storage_rw_resp_p) == CY_RESP_SDIO_GET_TUPLE) {
-			resp_data = cy_as_ll_request_response__get_word
-				(reply_p, 0);
-			if (resp_data) {
-				ret = CY_AS_ERROR_INVALID_REQUEST;
-			} else if (data_p != 0)
-				*(uint8_t *)data_p = (uint8_t)
-					(cy_as_ll_request_response__get_word
-						(reply_p, 0)&0x00ff);
-		} else {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-		}
-	}
-	return ret;
-}
-
-/*Query Device*/
-cy_as_return_status_t
-cy_as_sdio_query_card(
-		cy_as_device_handle handle,
-		cy_as_bus_number_t bus,
-		uint32_t device,
-		cy_as_sdio_card *data_p)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	uint8_t resp_type;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	ret = cy_as_sdio_device_check(dev_p, bus, device);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/* Allocating memory to the SDIO device structure in dev_p */
-
-	cy_as_hal_mem_set(&dev_p->sdiocard[bus], 0, sizeof(cy_as_sdio_device));
-
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_SDIO_QUERY_CARD,
-		CY_RQT_STORAGE_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device, 0));
-
-	reply_p = cy_as_ll_create_response(dev_p, 5);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	ret = cy_as_ll_send_request_wait_reply(dev_p,
-		req_p, reply_p);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	resp_type = cy_as_ll_request_response__get_code(reply_p);
-	if (resp_type == CY_RESP_SDIO_QUERY_CARD) {
-		dev_p->sdiocard[bus].card.num_functions	=
-			(uint8_t)((reply_p->data[0]&0xff00)>>8);
-		dev_p->sdiocard[bus].card.memory_present =
-			(uint8_t)reply_p->data[0]&0x0001;
-		dev_p->sdiocard[bus].card.manufacturer__id =
-			reply_p->data[1];
-		dev_p->sdiocard[bus].card.manufacturer_info =
-			reply_p->data[2];
-		dev_p->sdiocard[bus].card.blocksize =
-			reply_p->data[3];
-		dev_p->sdiocard[bus].card.maxblocksize =
-			reply_p->data[3];
-		dev_p->sdiocard[bus].card.card_capability =
-			(uint8_t)((reply_p->data[4]&0xff00)>>8);
-		dev_p->sdiocard[bus].card.sdio_version =
-			(uint8_t)(reply_p->data[4]&0x00ff);
-		dev_p->sdiocard[bus].function_init_map = 0x01;
-		data_p->num_functions =
-			dev_p->sdiocard[bus].card.num_functions;
-		data_p->memory_present =
-			dev_p->sdiocard[bus].card.memory_present;
-		data_p->manufacturer__id =
-			dev_p->sdiocard[bus].card.manufacturer__id;
-		data_p->manufacturer_info =
-			dev_p->sdiocard[bus].card.manufacturer_info;
-		data_p->blocksize = dev_p->sdiocard[bus].card.blocksize;
-		data_p->maxblocksize =
-			dev_p->sdiocard[bus].card.maxblocksize;
-		data_p->card_capability	=
-			dev_p->sdiocard[bus].card.card_capability;
-		data_p->sdio_version =
-			dev_p->sdiocard[bus].card.sdio_version;
-	} else {
-		if (resp_type == CY_RESP_SUCCESS_FAILURE)
-			ret = cy_as_ll_request_response__get_word(reply_p, 0);
-		else
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-	}
-destroy:
-	if (req_p != 0)
-		cy_as_ll_destroy_request(dev_p, req_p);
-	if (reply_p != 0)
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_sdio_query_card);
-
-/*Reset SDIO card. */
-cy_as_return_status_t
-cy_as_sdio_reset_card(
-		cy_as_device_handle			handle,
-		cy_as_bus_number_t		 bus,
-		uint32_t				device)
-{
-
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint8_t resp_type;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	ret = cy_as_sdio_device_check(dev_p, bus, device);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (dev_p->sdiocard != 0) {
-		dev_p->sdiocard[bus].function_init_map = 0;
-		dev_p->sdiocard[bus].function_suspended_map = 0;
-	}
-
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_SDIO_RESET_DEV,
-		CY_RQT_STORAGE_RQT_CONTEXT, 1);
-
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/*Setup mailbox */
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device, 0));
-
-	reply_p = cy_as_ll_create_response(dev_p, 2);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	ret = cy_as_ll_send_request_wait_reply(dev_p,
-		req_p, reply_p);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	resp_type = cy_as_ll_request_response__get_code(reply_p);
-
-	if (resp_type == CY_RESP_SUCCESS_FAILURE) {
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-		if (ret == CY_AS_ERROR_SUCCESS)
-			ret = cy_as_sdio_query_card(handle, bus, device, 0);
-	} else
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-
-destroy:
-	if (req_p != 0)
-		cy_as_ll_destroy_request(dev_p, req_p);
-	if (reply_p != 0)
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	return ret;
-}
-
-/* Initialise an IO function*/
-cy_as_return_status_t
-cy_as_sdio_init_function(
-		cy_as_device_handle			handle,
-		cy_as_bus_number_t			 bus,
-		uint32_t					device,
-		uint8_t					 n_function_no,
-		uint8_t					 misc_buf)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint8_t resp_type;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	ret = cy_as_sdio_device_check(dev_p, bus, device);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (!(cy_as_sdio_check_function_initialized
-		(handle, bus, 0)))
-		return CY_AS_ERROR_NOT_RUNNING;
-
-	if ((cy_as_sdio_check_function_initialized
-	(handle, bus, n_function_no))) {
-		if (misc_buf&CY_SDIO_FORCE_INIT)
-			dev_p->sdiocard[bus].function_init_map &=
-				(~(1 << n_function_no));
-		else
-			return CY_AS_ERROR_ALREADY_RUNNING;
-	}
-
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_SDIO_INIT_FUNCTION, CY_RQT_STORAGE_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device, n_function_no));
-
-	reply_p = cy_as_ll_create_response(dev_p, 5);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	resp_type = cy_as_ll_request_response__get_code(reply_p);
-
-	if (resp_type == CY_RESP_SDIO_INIT_FUNCTION) {
-		dev_p->sdiocard[bus].function[n_function_no-1].function_code =
-			(uint8_t)((reply_p->data[0]&0xff00)>>8);
-		dev_p->sdiocard[bus].function[n_function_no-1].
-			extended_func_code = (uint8_t)reply_p->data[0]&0x00ff;
-		dev_p->sdiocard[bus].function[n_function_no-1].blocksize =
-			reply_p->data[1];
-		dev_p->sdiocard[bus].function[n_function_no-1].
-			maxblocksize = reply_p->data[1];
-		dev_p->sdiocard[bus].function[n_function_no-1].card_psn	=
-			(uint32_t)(reply_p->data[2])<<16;
-		dev_p->sdiocard[bus].function[n_function_no-1].card_psn |=
-			(uint32_t)(reply_p->data[3]);
-		dev_p->sdiocard[bus].function[n_function_no-1].csa_bits =
-			(uint8_t)((reply_p->data[4]&0xff00)>>8);
-		dev_p->sdiocard[bus].function[n_function_no-1].wakeup_support =
-			(uint8_t)(reply_p->data[4]&0x0001);
-		dev_p->sdiocard[bus].function_init_map |= (1 << n_function_no);
-		cy_as_sdio_clear_function_suspended(handle, bus, n_function_no);
-
-	} else {
-		if (resp_type == CY_RESP_SUCCESS_FAILURE)
-			ret = cy_as_ll_request_response__get_word(reply_p, 0);
-		else
-			ret = CY_AS_ERROR_INVALID_FUNCTION;
-	}
-
-destroy:
-	if (req_p != 0)
-		cy_as_ll_destroy_request(dev_p, req_p);
-	if (reply_p != 0)
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_sdio_init_function);
-
-/*Query individual functions. */
-cy_as_return_status_t
-cy_as_sdio_query_function(
-		cy_as_device_handle			handle,
-		cy_as_bus_number_t			 bus,
-		uint32_t					device,
-		uint8_t					 n_function_no,
-		cy_as_sdio_func			*data_p)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	cy_as_return_status_t ret;
-
-	ret = cy_as_sdio_device_check(dev_p, bus, device);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (!(cy_as_sdio_check_function_initialized(handle,
-		bus, n_function_no)))
-		return CY_AS_ERROR_INVALID_FUNCTION;
-
-	data_p->blocksize =
-		dev_p->sdiocard[bus].function[n_function_no-1].blocksize;
-	data_p->card_psn =
-		dev_p->sdiocard[bus].function[n_function_no-1].card_psn;
-	data_p->csa_bits =
-		dev_p->sdiocard[bus].function[n_function_no-1].csa_bits;
-	data_p->extended_func_code =
-		dev_p->sdiocard[bus].function[n_function_no-1].
-		extended_func_code;
-	data_p->function_code =
-		dev_p->sdiocard[bus].function[n_function_no-1].function_code;
-	data_p->maxblocksize =
-		dev_p->sdiocard[bus].function[n_function_no-1].maxblocksize;
-	data_p->wakeup_support =
-		dev_p->sdiocard[bus].function[n_function_no-1].wakeup_support;
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-/* Abort the Current Extended IO Operation*/
-cy_as_return_status_t
-cy_as_sdio_abort_function(
-		cy_as_device_handle			handle,
-		cy_as_bus_number_t			 bus,
-		uint32_t					device,
-		uint8_t					 n_function_no)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint8_t resp_type;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	ret = cy_as_sdio_device_check(dev_p, bus, device);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (!(cy_as_sdio_check_function_initialized(handle,
-		bus, n_function_no)))
-		return CY_AS_ERROR_INVALID_FUNCTION;
-
-	if ((cy_as_device_is_storage_async_pending(dev_p)) ||
-	(dev_p->storage_wait)) {
-		if (!(cy_as_sdio_get_card_capability(handle, bus) &
-		CY_SDIO_SDC))
-			return CY_AS_ERROR_INVALID_COMMAND;
-	}
-
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_SDIO_ABORT_IO,
-		CY_RQT_GENERAL_RQT_CONTEXT, 1);
-
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/*Setup mailbox */
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device, n_function_no));
-
-	reply_p = cy_as_ll_create_response(dev_p, 2);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	resp_type = cy_as_ll_request_response__get_code(reply_p);
-
-	if (resp_type == CY_RESP_SUCCESS_FAILURE)
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	else
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-
-
-destroy:
-	if (req_p != 0)
-		cy_as_ll_destroy_request(dev_p, req_p);
-	if (reply_p != 0)
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	return ret;
-}
-
-/* Suspend IO to current function*/
-cy_as_return_status_t
-cy_as_sdio_suspend(
-		cy_as_device_handle		handle,
-		cy_as_bus_number_t		 bus,
-		uint32_t				device,
-		uint8_t				 n_function_no)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	ret = cy_as_sdio_device_check(dev_p, bus, device);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (!(cy_as_sdio_check_function_initialized(handle, bus,
-		n_function_no)))
-		return CY_AS_ERROR_INVALID_FUNCTION;
-	if (!(cy_as_sdio_check_support_bus_suspend(handle, bus)))
-		return CY_AS_ERROR_INVALID_FUNCTION;
-	if (!(cy_as_sdio_get_card_capability(handle, bus) & CY_SDIO_SDC))
-		return CY_AS_ERROR_INVALID_FUNCTION;
-	if (cy_as_sdio_check_function_suspended(handle, bus, n_function_no))
-		return CY_AS_ERROR_FUNCTION_SUSPENDED;
-
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_SDIO_SUSPEND, CY_RQT_GENERAL_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/*Setup mailbox */
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device, n_function_no));
-
-	reply_p = cy_as_ll_create_response(dev_p, 2);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-	ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		ret = cy_as_ll_request_response__get_code(reply_p);
-		cy_as_sdio_set_function_suspended(handle, bus, n_function_no);
-	}
-
-	if (req_p != 0)
-		cy_as_ll_destroy_request(dev_p, req_p);
-	if (reply_p != 0)
-		cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-/*Resume suspended function*/
-cy_as_return_status_t
-cy_as_sdio_resume(
-		cy_as_device_handle		handle,
-		cy_as_bus_number_t		 bus,
-		uint32_t				device,
-		uint8_t				 n_function_no,
-		cy_as_oper_type			op,
-		uint8_t				 misc_buf,
-		uint16_t				pendingblockcount,
-		uint8_t				 *data_p
-		)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t resp_data, ret = CY_AS_ERROR_SUCCESS;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	ret = cy_as_sdio_device_check(dev_p, bus, device);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (!(cy_as_sdio_check_function_initialized
-	(handle, bus, n_function_no)))
-		return CY_AS_ERROR_INVALID_FUNCTION;
-
-	/* If suspend resume is not supported return */
-	if (!(cy_as_sdio_check_support_bus_suspend(handle, bus)))
-		return CY_AS_ERROR_INVALID_FUNCTION;
-
-	/* if the function is not suspended return. */
-	if (!(cy_as_sdio_check_function_suspended
-	(handle, bus, n_function_no)))
-		return CY_AS_ERROR_INVALID_FUNCTION;
-
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_SDIO_RESUME, CY_RQT_STORAGE_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/*Setup mailbox */
-	cy_as_ll_request_response__set_word(req_p, 0,
-		create_address(bus, (uint8_t)device, n_function_no));
-
-	reply_p = cy_as_ll_create_response(dev_p, 2);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-	ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	if (cy_as_ll_request_response__get_code(reply_p) ==
-	CY_RESP_SDIO_RESUME) {
-		resp_data = cy_as_ll_request_response__get_word(reply_p, 0);
-		if (resp_data & 0x00ff) {
-			/* Send extended read request to resume the read. */
-			if (op == cy_as_op_read) {
-				ret = cy_as_sdio_extended_i_o(handle, bus,
-					device, n_function_no, 0, misc_buf,
-					pendingblockcount, cy_false, data_p, 1);
-			} else {
-				ret = cy_as_sdio_extended_i_o(handle, bus,
-					device, n_function_no, 0, misc_buf,
-					pendingblockcount, cy_true, data_p, 1);
-			}
-		} else {
-			ret = CY_AS_ERROR_SUCCESS;
-		}
-	} else {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-	}
-
-destroy:
-	cy_as_sdio_clear_function_suspended(handle, bus, n_function_no);
-	if (req_p != 0)
-		cy_as_ll_destroy_request(dev_p, req_p);
-	if (reply_p != 0)
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	return ret;
-
-}
-
-/*Set function blocksize. Size cannot exceed max
- * block size for the function*/
-cy_as_return_status_t
-cy_as_sdio_set_blocksize(
-		cy_as_device_handle			handle,
-		cy_as_bus_number_t			 bus,
-		uint32_t					device,
-		uint8_t					 n_function_no,
-		uint16_t					blocksize)
-{
-	cy_as_return_status_t ret;
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	ret = cy_as_sdio_device_check(dev_p, bus, device);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (!(cy_as_sdio_check_function_initialized
-	(handle, bus, n_function_no)))
-		return CY_AS_ERROR_INVALID_FUNCTION;
-	if (n_function_no == 0) {
-		if (blocksize > cy_as_sdio_get_card_max_blocksize(handle, bus))
-			return CY_AS_ERROR_INVALID_BLOCKSIZE;
-		else if (blocksize == cy_as_sdio_get_card_blocksize
-			(handle, bus))
-			return CY_AS_ERROR_SUCCESS;
-	} else {
-		if (blocksize >
-			cy_as_sdio_get_function_max_blocksize(handle,
-				bus, n_function_no))
-			return CY_AS_ERROR_INVALID_BLOCKSIZE;
-		else if (blocksize ==
-			cy_as_sdio_get_function_blocksize(handle,
-				bus, n_function_no))
-			return CY_AS_ERROR_SUCCESS;
-	}
-
-	ret = cy_as_sdio_direct_write(handle, bus, device, 0,
-		(uint16_t)(n_function_no << 8) |
-		0x10, 0, blocksize & 0x00ff, 0);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	ret = cy_as_sdio_direct_write(handle, bus, device, 0,
-		(uint16_t)(n_function_no << 8) |
-		0x11, 0, (blocksize & 0xff00) >> 8, 0);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (n_function_no == 0)
-		cy_as_sdio_set_card_block_size(handle, bus, blocksize);
-	else
-		cy_as_sdio_set_function_block_size(handle,
-			bus, n_function_no, blocksize);
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_sdio_set_blocksize);
-
-/* Deinitialize an SDIO function*/
-cy_as_return_status_t
-cy_as_sdio_de_init_function(
-		cy_as_device_handle			handle,
-		cy_as_bus_number_t			 bus,
-		uint32_t					device,
-		uint8_t					 n_function_no)
-{
-	cy_as_return_status_t ret;
-	uint8_t temp;
-
-	if (n_function_no == 0)
-		return CY_AS_ERROR_INVALID_FUNCTION;
-
-	ret = cy_as_sdio_device_check((cy_as_device *)handle, bus, device);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (!(cy_as_sdio_check_function_initialized
-		(handle, bus, n_function_no)))
-		return CY_AS_ERROR_SUCCESS;
-
-	temp = (uint8_t)(((cy_as_device *)handle)->sdiocard[bus].
-		function_init_map & (~(1 << n_function_no)));
-
-	cy_as_sdio_direct_write(handle, bus, device, 0, 0x02, 0, temp, 0);
-
-	((cy_as_device *)handle)->sdiocard[bus].function_init_map &=
-		(~(1 << n_function_no));
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-
-/*[]*/
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasusb.c b/drivers/staging/westbridge/astoria/api/src/cyasusb.c
deleted file mode 100644
index 1b55e611191e..000000000000
--- a/drivers/staging/westbridge/astoria/api/src/cyasusb.c
+++ /dev/null
@@ -1,3740 +0,0 @@
-/* Cypress West Bridge API source file (cyasusb.c)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#include "../../include/linux/westbridge/cyashal.h"
-#include "../../include/linux/westbridge/cyasusb.h"
-#include "../../include/linux/westbridge/cyaserr.h"
-#include "../../include/linux/westbridge/cyasdma.h"
-#include "../../include/linux/westbridge/cyaslowlevel.h"
-#include "../../include/linux/westbridge/cyaslep2pep.h"
-#include "../../include/linux/westbridge/cyasregs.h"
-#include "../../include/linux/westbridge/cyasstorage.h"
-
-static cy_as_return_status_t
-cy_as_usb_ack_setup_packet(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle handle,
-	/* The callback if async call */
-	cy_as_function_callback	cb,
-	/* Client supplied data */
-	uint32_t client
-	);
-
-static void
-cy_as_usb_func_callback(
-			cy_as_device *dev_p,
-			uint8_t context,
-			cy_as_ll_request_response *rqt,
-			cy_as_ll_request_response *resp,
-			cy_as_return_status_t ret);
-/*
-* Reset the USB EP0 state
-*/
-static void
-cy_as_usb_reset_e_p0_state(cy_as_device *dev_p)
-{
-	cy_as_log_debug_message(6, "cy_as_usb_reset_e_p0_state called");
-
-	cy_as_device_clear_ack_delayed(dev_p);
-	cy_as_device_clear_setup_packet(dev_p);
-	if (cy_as_device_is_usb_async_pending(dev_p, 0))
-		cy_as_usb_cancel_async((cy_as_device_handle)dev_p, 0);
-
-	dev_p->usb_pending_buffer = 0;
-}
-
-/*
-* External function to map logical endpoints to physical endpoints
-*/
-static cy_as_return_status_t
-is_usb_active(cy_as_device *dev_p)
-{
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	if (!cy_as_device_is_firmware_loaded(dev_p))
-		return CY_AS_ERROR_NO_FIRMWARE;
-
-	if (dev_p->usb_count == 0)
-		return CY_AS_ERROR_NOT_RUNNING;
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-static void
-usb_ack_callback(cy_as_device_handle h,
-			   cy_as_return_status_t status,
-			   uint32_t client,
-			   cy_as_funct_c_b_type  type,
-			   void *data)
-{
-	cy_as_device *dev_p = (cy_as_device *)h;
-
-	(void)client;
-	(void)status;
-	(void)data;
-
-	cy_as_hal_assert(type == CY_FUNCT_CB_NODATA);
-
-	if (dev_p->usb_pending_buffer) {
-		cy_as_usb_io_callback cb;
-
-		cb = dev_p->usb_cb[0];
-		dev_p->usb_cb[0] = 0;
-		cy_as_device_clear_usb_async_pending(dev_p, 0);
-		if (cb)
-			cb(h, 0, dev_p->usb_pending_size,
-				dev_p->usb_pending_buffer, dev_p->usb_error);
-
-		dev_p->usb_pending_buffer = 0;
-	}
-
-	cy_as_device_clear_setup_packet(dev_p);
-}
-
-static void
-my_usb_request_callback_usb_event(cy_as_device *dev_p,
-	cy_as_ll_request_response *req_p)
-{
-	uint16_t ev;
-	uint16_t val;
-	cy_as_device_handle h = (cy_as_device_handle)dev_p;
-
-	ev = cy_as_ll_request_response__get_word(req_p, 0);
-	switch (ev) {
-	case 0:			 /* Reserved */
-		cy_as_ll_send_status_response(dev_p, CY_RQT_USB_RQT_CONTEXT,
-			CY_AS_ERROR_INVALID_REQUEST, 0);
-		break;
-
-	case 1:			 /* Reserved */
-		cy_as_ll_send_status_response(dev_p, CY_RQT_USB_RQT_CONTEXT,
-			CY_AS_ERROR_INVALID_REQUEST, 0);
-		break;
-
-	case 2:			 /* USB Suspend */
-		dev_p->usb_last_event = cy_as_event_usb_suspend;
-		if (dev_p->usb_event_cb_ms)
-			dev_p->usb_event_cb_ms(h, cy_as_event_usb_suspend, 0);
-		else if (dev_p->usb_event_cb)
-			dev_p->usb_event_cb(h, cy_as_event_usb_suspend, 0);
-		cy_as_ll_send_status_response(dev_p,
-			CY_RQT_USB_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 0);
-		break;
-
-	case 3:			 /* USB Resume */
-		dev_p->usb_last_event = cy_as_event_usb_resume;
-		if (dev_p->usb_event_cb_ms)
-			dev_p->usb_event_cb_ms(h, cy_as_event_usb_resume, 0);
-		else if (dev_p->usb_event_cb)
-			dev_p->usb_event_cb(h, cy_as_event_usb_resume, 0);
-		cy_as_ll_send_status_response(dev_p,
-			CY_RQT_USB_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 0);
-		break;
-
-	case 4:			 /* USB Reset */
-		/*
-		* if we get a USB reset, the USB host did not understand
-		* our response or we timed out for some reason.  reset
-		* our internal state to be ready for another set of
-		* enumeration based requests.
-		*/
-		if (cy_as_device_is_ack_delayed(dev_p))
-			cy_as_usb_reset_e_p0_state(dev_p);
-
-		dev_p->usb_last_event = cy_as_event_usb_reset;
-		if (dev_p->usb_event_cb_ms)
-			dev_p->usb_event_cb_ms(h, cy_as_event_usb_reset, 0);
-		else if (dev_p->usb_event_cb)
-			dev_p->usb_event_cb(h, cy_as_event_usb_reset, 0);
-
-		cy_as_ll_send_status_response(dev_p,
-			CY_RQT_USB_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 0);
-		cy_as_device_clear_usb_high_speed(dev_p);
-		cy_as_usb_set_dma_sizes(dev_p);
-		dev_p->usb_max_tx_size = 0x40;
-		cy_as_dma_set_max_dma_size(dev_p, 0x06, 0x40);
-		break;
-
-	case 5:			 /* USB Set Configuration */
-		/* The configuration to set */
-		val = cy_as_ll_request_response__get_word(req_p, 1);
-		dev_p->usb_last_event = cy_as_event_usb_set_config;
-		if (dev_p->usb_event_cb_ms)
-			dev_p->usb_event_cb_ms(h,
-				cy_as_event_usb_set_config, &val);
-		else if (dev_p->usb_event_cb)
-			dev_p->usb_event_cb(h,
-				cy_as_event_usb_set_config, &val);
-
-		cy_as_ll_send_status_response(dev_p,
-			CY_RQT_USB_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 0);
-		break;
-
-	case 6:			 /* USB Speed change */
-		/* Connect speed */
-		val = cy_as_ll_request_response__get_word(req_p, 1);
-		dev_p->usb_last_event = cy_as_event_usb_speed_change;
-		if (dev_p->usb_event_cb_ms)
-			dev_p->usb_event_cb_ms(h,
-				cy_as_event_usb_speed_change, &val);
-		else if (dev_p->usb_event_cb)
-			dev_p->usb_event_cb(h,
-				cy_as_event_usb_speed_change, &val);
-
-		cy_as_ll_send_status_response(dev_p,
-			CY_RQT_USB_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 0);
-		cy_as_device_set_usb_high_speed(dev_p);
-		cy_as_usb_set_dma_sizes(dev_p);
-		dev_p->usb_max_tx_size = 0x200;
-		cy_as_dma_set_max_dma_size(dev_p, 0x06, 0x200);
-		break;
-
-	case 7:			 /* USB Clear Feature */
-		/* EP Number */
-		val = cy_as_ll_request_response__get_word(req_p, 1);
-		if (dev_p->usb_event_cb_ms)
-			dev_p->usb_event_cb_ms(h,
-				cy_as_event_usb_clear_feature, &val);
-		if (dev_p->usb_event_cb)
-			dev_p->usb_event_cb(h,
-				cy_as_event_usb_clear_feature, &val);
-
-		cy_as_ll_send_status_response(dev_p,
-			CY_RQT_USB_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 0);
-		break;
-
-	default:
-		cy_as_hal_print_message("invalid event type\n");
-		cy_as_ll_send_data_response(dev_p, CY_RQT_USB_RQT_CONTEXT,
-			CY_RESP_USB_INVALID_EVENT, sizeof(ev), &ev);
-		break;
-	}
-}
-
-static void
-my_usb_request_callback_usb_data(cy_as_device *dev_p,
-	cy_as_ll_request_response *req_p)
-{
-	cy_as_end_point_number_t ep;
-	uint8_t type;
-	uint16_t len;
-	uint16_t val;
-	cy_as_device_handle h = (cy_as_device_handle)dev_p;
-
-	val = cy_as_ll_request_response__get_word(req_p, 0);
-	ep = (cy_as_end_point_number_t)((val >> 13) & 0x01);
-	len = (val & 0x1ff);
-
-	cy_as_hal_assert(len <= 64);
-	cy_as_ll_request_response__unpack(req_p,
-		1, len, dev_p->usb_ep_data);
-
-	type = (uint8_t)((val >> 14) & 0x03);
-	if (type == 0) {
-		if (cy_as_device_is_ack_delayed(dev_p)) {
-			/*
-			* A setup packet has arrived while we are
-			* processing a previous setup packet. reset
-			* our state with respect to EP0 to be ready
-			* to process the new packet.
-			*/
-			cy_as_usb_reset_e_p0_state(dev_p);
-		}
-
-		if (len != 8)
-			cy_as_ll_send_status_response(dev_p,
-				CY_RQT_USB_RQT_CONTEXT,
-				CY_AS_ERROR_INVALID_REQUEST, 0);
-		else {
-			cy_as_device_clear_ep0_stalled(dev_p);
-			cy_as_device_set_setup_packet(dev_p);
-			cy_as_ll_send_status_response(dev_p,
-				CY_RQT_USB_RQT_CONTEXT,
-				CY_AS_ERROR_SUCCESS, 0);
-
-			if (dev_p->usb_event_cb_ms)
-				dev_p->usb_event_cb_ms(h,
-					cy_as_event_usb_setup_packet,
-					dev_p->usb_ep_data);
-			else
-				dev_p->usb_event_cb(h,
-					cy_as_event_usb_setup_packet,
-					dev_p->usb_ep_data);
-
-			if ((!cy_as_device_is_ack_delayed(dev_p)) &&
-				(!cy_as_device_is_ep0_stalled(dev_p)))
-				cy_as_usb_ack_setup_packet(h,
-					usb_ack_callback, 0);
-		}
-	} else if (type == 2) {
-		if (len != 0)
-			cy_as_ll_send_status_response(dev_p,
-				CY_RQT_USB_RQT_CONTEXT,
-				CY_AS_ERROR_INVALID_REQUEST, 0);
-		else {
-			if (dev_p->usb_event_cb_ms)
-				dev_p->usb_event_cb_ms(h,
-					cy_as_event_usb_status_packet, 0);
-			else
-				dev_p->usb_event_cb(h,
-					cy_as_event_usb_status_packet, 0);
-
-			cy_as_ll_send_status_response(dev_p,
-				CY_RQT_USB_RQT_CONTEXT,
-				CY_AS_ERROR_SUCCESS, 0);
-		}
-	} else if (type == 1) {
-		/*
-		* we need to hand the data associated with these
-		* endpoints to the DMA module.
-		*/
-		cy_as_dma_received_data(dev_p, ep, len, dev_p->usb_ep_data);
-		cy_as_ll_send_status_response(dev_p,
-			CY_RQT_USB_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 0);
-	}
-}
-
-static void
-my_usb_request_callback_inquiry(cy_as_device *dev_p,
-	cy_as_ll_request_response *req_p)
-{
-	cy_as_usb_inquiry_data_dep cbdata;
-	cy_as_usb_inquiry_data cbdata_ms;
-	void *data;
-	uint16_t val;
-	cy_as_device_handle h = (cy_as_device_handle)dev_p;
-	uint8_t def_inq_data[64];
-	uint8_t evpd;
-	uint8_t codepage;
-	cy_bool updated;
-	uint16_t length;
-
-	cy_as_bus_number_t bus;
-	uint32_t		device;
-	cy_as_media_type   media;
-
-	val	= cy_as_ll_request_response__get_word(req_p, 0);
-	bus	= cy_as_storage_get_bus_from_address(val);
-	device = cy_as_storage_get_device_from_address(val);
-	media  = cy_as_storage_get_media_from_address(val);
-
-	val	  = cy_as_ll_request_response__get_word(req_p, 1);
-	evpd	 = (uint8_t)((val >> 8) & 0x01);
-	codepage = (uint8_t)(val & 0xff);
-
-	length = cy_as_ll_request_response__get_word(req_p, 2);
-	data   = (void *)def_inq_data;
-
-	updated = cy_false;
-
-	if (dev_p->usb_event_cb_ms) {
-		cbdata_ms.bus = bus;
-		cbdata_ms.device = device;
-		cbdata_ms.updated = updated;
-		cbdata_ms.evpd = evpd;
-		cbdata_ms.codepage = codepage;
-		cbdata_ms.length = length;
-		cbdata_ms.data = data;
-
-		cy_as_hal_assert(cbdata_ms.length <= sizeof(def_inq_data));
-		cy_as_ll_request_response__unpack(req_p,
-			3, cbdata_ms.length, cbdata_ms.data);
-
-		dev_p->usb_event_cb_ms(h,
-			cy_as_event_usb_inquiry_before, &cbdata_ms);
-
-		updated = cbdata_ms.updated;
-		data	= cbdata_ms.data;
-		length  = cbdata_ms.length;
-	} else if (dev_p->usb_event_cb) {
-		cbdata.media = media;
-		cbdata.updated = updated;
-		cbdata.evpd = evpd;
-		cbdata.codepage = codepage;
-		cbdata.length = length;
-		cbdata.data = data;
-
-		cy_as_hal_assert(cbdata.length <=
-			sizeof(def_inq_data));
-		cy_as_ll_request_response__unpack(req_p, 3,
-			cbdata.length, cbdata.data);
-
-		dev_p->usb_event_cb(h,
-			cy_as_event_usb_inquiry_before, &cbdata);
-
-		updated = cbdata.updated;
-		data	= cbdata.data;
-		length  = cbdata.length;
-	}
-
-	if (updated && length > 192)
-		cy_as_hal_print_message("an inquiry result from a "
-			"cy_as_event_usb_inquiry_before event "
-			"was greater than 192 bytes.");
-
-	/* Now send the reply with the data back
-	 * to the West Bridge device */
-	if (updated && length <= 192) {
-		/*
-		* the callback function modified the inquiry
-		* data, ship the data back to the west bridge firmware.
-		*/
-		cy_as_ll_send_data_response(dev_p,
-			CY_RQT_USB_RQT_CONTEXT,
-			CY_RESP_INQUIRY_DATA, length, data);
-	} else {
-		/*
-		* the callback did not modify the data, just acknowledge
-		* that we processed the request
-		*/
-		cy_as_ll_send_status_response(dev_p,
-			CY_RQT_USB_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 1);
-	}
-
-	if (dev_p->usb_event_cb_ms)
-		dev_p->usb_event_cb_ms(h,
-			cy_as_event_usb_inquiry_after, &cbdata_ms);
-	else if (dev_p->usb_event_cb)
-		dev_p->usb_event_cb(h,
-			cy_as_event_usb_inquiry_after, &cbdata);
-}
-
-static void
-my_usb_request_callback_start_stop(cy_as_device *dev_p,
-	cy_as_ll_request_response *req_p)
-{
-	cy_as_bus_number_t bus;
-	cy_as_media_type media;
-	uint32_t device;
-	uint16_t val;
-
-	if (dev_p->usb_event_cb_ms || dev_p->usb_event_cb) {
-		cy_bool loej;
-		cy_bool start;
-		cy_as_device_handle h = (cy_as_device_handle)dev_p;
-
-		val = cy_as_ll_request_response__get_word(req_p, 0);
-		bus = cy_as_storage_get_bus_from_address(val);
-		device = cy_as_storage_get_device_from_address(val);
-		media = cy_as_storage_get_media_from_address(val);
-
-		val = cy_as_ll_request_response__get_word(req_p, 1);
-		loej = (val & 0x02) ? cy_true : cy_false;
-		start = (val & 0x01) ? cy_true : cy_false;
-
-		if (dev_p->usb_event_cb_ms) {
-			cy_as_usb_start_stop_data cbdata_ms;
-
-			cbdata_ms.bus = bus;
-			cbdata_ms.device = device;
-			cbdata_ms.loej = loej;
-			cbdata_ms.start = start;
-			dev_p->usb_event_cb_ms(h,
-				cy_as_event_usb_start_stop, &cbdata_ms);
-
-		} else if (dev_p->usb_event_cb) {
-			cy_as_usb_start_stop_data_dep cbdata;
-
-			cbdata.media = media;
-			cbdata.loej = loej;
-			cbdata.start = start;
-			dev_p->usb_event_cb(h,
-				cy_as_event_usb_start_stop, &cbdata);
-		}
-	}
-	cy_as_ll_send_status_response(dev_p,
-		CY_RQT_USB_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 1);
-}
-
-static void
-my_usb_request_callback_uknown_c_b_w(cy_as_device *dev_p,
-	cy_as_ll_request_response *req_p)
-{
-	uint16_t val;
-	cy_as_device_handle h = (cy_as_device_handle)dev_p;
-	uint8_t buf[16];
-
-	uint8_t response[4];
-	uint16_t reqlen;
-	void *request;
-	uint8_t status;
-	uint8_t key;
-	uint8_t asc;
-	uint8_t ascq;
-
-	val = cy_as_ll_request_response__get_word(req_p, 0);
-	/* Failed by default */
-	status = 1;
-	/* Invalid command */
-	key = 0x05;
-	/* Invalid command */
-	asc = 0x20;
-	/* Invalid command */
-	ascq = 0x00;
-	reqlen = cy_as_ll_request_response__get_word(req_p, 1);
-	request = buf;
-
-	cy_as_hal_assert(reqlen <= sizeof(buf));
-	cy_as_ll_request_response__unpack(req_p, 2, reqlen, request);
-
-	if (dev_p->usb_event_cb_ms)  {
-		cy_as_usb_unknown_command_data cbdata_ms;
-		cbdata_ms.bus = cy_as_storage_get_bus_from_address(val);
-		cbdata_ms.device =
-			cy_as_storage_get_device_from_address(val);
-		cbdata_ms.reqlen = reqlen;
-		cbdata_ms.request = request;
-		cbdata_ms.status = status;
-		cbdata_ms.key = key;
-		cbdata_ms.asc = asc;
-		cbdata_ms.ascq = ascq;
-
-		dev_p->usb_event_cb_ms(h,
-			cy_as_event_usb_unknown_storage, &cbdata_ms);
-		status = cbdata_ms.status;
-		key = cbdata_ms.key;
-		asc = cbdata_ms.asc;
-		ascq = cbdata_ms.ascq;
-	} else if (dev_p->usb_event_cb) {
-		cy_as_usb_unknown_command_data_dep cbdata;
-		cbdata.media =
-			cy_as_storage_get_media_from_address(val);
-		cbdata.reqlen = reqlen;
-		cbdata.request = request;
-		cbdata.status = status;
-		cbdata.key = key;
-		cbdata.asc = asc;
-		cbdata.ascq = ascq;
-
-		dev_p->usb_event_cb(h,
-			cy_as_event_usb_unknown_storage, &cbdata);
-		status = cbdata.status;
-		key = cbdata.key;
-		asc = cbdata.asc;
-		ascq = cbdata.ascq;
-	}
-
-	response[0] = status;
-	response[1] = key;
-	response[2] = asc;
-	response[3] = ascq;
-	cy_as_ll_send_data_response(dev_p, CY_RQT_USB_RQT_CONTEXT,
-		CY_RESP_UNKNOWN_SCSI_COMMAND, sizeof(response), response);
-}
-
-static void
-my_usb_request_callback_m_s_c_progress(cy_as_device *dev_p,
-	cy_as_ll_request_response *req_p)
-{
-	uint16_t val1, val2;
-	cy_as_device_handle h = (cy_as_device_handle)dev_p;
-
-	if ((dev_p->usb_event_cb) || (dev_p->usb_event_cb_ms)) {
-		cy_as_m_s_c_progress_data cbdata;
-
-		val1 = cy_as_ll_request_response__get_word(req_p, 0);
-		val2 = cy_as_ll_request_response__get_word(req_p, 1);
-		cbdata.wr_count = (uint32_t)((val1 << 16) | val2);
-
-		val1 = cy_as_ll_request_response__get_word(req_p, 2);
-		val2 = cy_as_ll_request_response__get_word(req_p, 3);
-		cbdata.rd_count = (uint32_t)((val1 << 16) | val2);
-
-		if (dev_p->usb_event_cb)
-			dev_p->usb_event_cb(h,
-				cy_as_event_usb_m_s_c_progress, &cbdata);
-		else
-			dev_p->usb_event_cb_ms(h,
-				cy_as_event_usb_m_s_c_progress, &cbdata);
-	}
-
-	cy_as_ll_send_status_response(dev_p,
-		CY_RQT_USB_RQT_CONTEXT, CY_AS_ERROR_SUCCESS, 0);
-}
-
-/*
-* This function processes the requests delivered from the
-* firmware within the West Bridge device that are delivered
-* in the USB context.  These requests generally are EP0 and
-* EP1 related requests or USB events.
-*/
-static void
-my_usb_request_callback(cy_as_device *dev_p, uint8_t context,
-	cy_as_ll_request_response *req_p,
-	cy_as_ll_request_response *resp_p,
-	cy_as_return_status_t ret)
-{
-	uint16_t val;
-	uint8_t code = cy_as_ll_request_response__get_code(req_p);
-
-	(void)resp_p;
-	(void)context;
-	(void)ret;
-
-	switch (code) {
-	case CY_RQT_USB_EVENT:
-		my_usb_request_callback_usb_event(dev_p, req_p);
-		break;
-
-	case CY_RQT_USB_EP_DATA:
-		dev_p->usb_last_event = cy_as_event_usb_setup_packet;
-		my_usb_request_callback_usb_data(dev_p, req_p);
-		break;
-
-	case CY_RQT_SCSI_INQUIRY_COMMAND:
-		dev_p->usb_last_event = cy_as_event_usb_inquiry_after;
-		my_usb_request_callback_inquiry(dev_p, req_p);
-		break;
-
-	case CY_RQT_SCSI_START_STOP_COMMAND:
-		dev_p->usb_last_event = cy_as_event_usb_start_stop;
-		my_usb_request_callback_start_stop(dev_p, req_p);
-		break;
-
-	case CY_RQT_SCSI_UNKNOWN_COMMAND:
-		dev_p->usb_last_event = cy_as_event_usb_unknown_storage;
-		my_usb_request_callback_uknown_c_b_w(dev_p, req_p);
-		break;
-
-	case CY_RQT_USB_ACTIVITY_UPDATE:
-		dev_p->usb_last_event = cy_as_event_usb_m_s_c_progress;
-		my_usb_request_callback_m_s_c_progress(dev_p, req_p);
-		break;
-
-	default:
-		cy_as_hal_print_message("invalid request "
-			"received on USB context\n");
-		val = req_p->box0;
-		cy_as_ll_send_data_response(dev_p, CY_RQT_USB_RQT_CONTEXT,
-			CY_RESP_INVALID_REQUEST, sizeof(val), &val);
-		break;
-	}
-}
-
-static cy_as_return_status_t
-my_handle_response_usb_start(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p,
-			cy_as_return_status_t ret)
-{
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-	CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	/*
-	* mark EP 0 and EP1 as 64 byte endpoints
-	*/
-	cy_as_dma_set_max_dma_size(dev_p, 0, 64);
-	cy_as_dma_set_max_dma_size(dev_p, 1, 64);
-
-	dev_p->usb_count++;
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_destroy_c_b_queue(dev_p->usb_func_cbs);
-		cy_as_ll_register_request_callback(dev_p,
-			CY_RQT_USB_RQT_CONTEXT, 0);
-	}
-
-	cy_as_device_clear_u_s_s_pending(dev_p);
-
-	return ret;
-
-}
-
-/*
-* This function starts the USB stack.  The stack is reference
-* counted so if the stack is already started, this function
-* just increments the count.  If the stack has not been started,
-* a start request is sent to the West Bridge device.
-*
-* Note: Starting the USB stack does not cause the USB signals
-* to be connected to the USB pins.  To do this and therefore
-* initiate enumeration, CyAsUsbConnect() must be called.
-*/
-cy_as_return_status_t
-cy_as_usb_start(cy_as_device_handle handle,
-			   cy_as_function_callback cb,
-			   uint32_t client)
-{
-	cy_as_ll_request_response *req_p, *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_start called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	if (!cy_as_device_is_firmware_loaded(dev_p))
-		return CY_AS_ERROR_NO_FIRMWARE;
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	if (cy_as_device_is_u_s_s_pending(dev_p))
-		return CY_AS_ERROR_STARTSTOP_PENDING;
-
-	cy_as_device_set_u_s_s_pending(dev_p);
-
-	if (dev_p->usb_count == 0) {
-		/*
-		* since we are just starting the stack,
-		* mark USB as not connected to the remote host
-		*/
-		cy_as_device_clear_usb_connected(dev_p);
-		dev_p->usb_phy_config = 0;
-
-		/* Queue for 1.0 Async Requests, kept for
-		 * backwards compatibility */
-		dev_p->usb_func_cbs = cy_as_create_c_b_queue(CYAS_USB_FUNC_CB);
-		if (dev_p->usb_func_cbs == 0) {
-			cy_as_device_clear_u_s_s_pending(dev_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-
-		/* Reset the EP0 state */
-		cy_as_usb_reset_e_p0_state(dev_p);
-
-		/*
-		* we register here because the start request may cause
-		* events to occur before the response to the start request.
-		*/
-		cy_as_ll_register_request_callback(dev_p,
-			CY_RQT_USB_RQT_CONTEXT, my_usb_request_callback);
-
-		/* Create the request to send to the West Bridge device */
-		req_p = cy_as_ll_create_request(dev_p,
-			CY_RQT_START_USB, CY_RQT_USB_RQT_CONTEXT, 0);
-		if (req_p == 0) {
-			cy_as_destroy_c_b_queue(dev_p->usb_func_cbs);
-			dev_p->usb_func_cbs = 0;
-			cy_as_device_clear_u_s_s_pending(dev_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-
-		/* Reserve space for the reply, the reply data
-		 * will not exceed one word */
-		reply_p = cy_as_ll_create_response(dev_p, 1);
-		if (reply_p == 0) {
-			cy_as_destroy_c_b_queue(dev_p->usb_func_cbs);
-			dev_p->usb_func_cbs = 0;
-			cy_as_ll_destroy_request(dev_p, req_p);
-			cy_as_device_clear_u_s_s_pending(dev_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-
-		if (cb == 0) {
-			ret = cy_as_ll_send_request_wait_reply(dev_p,
-				req_p, reply_p);
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			return my_handle_response_usb_start(dev_p,
-				req_p, reply_p, ret);
-		} else {
-			ret = cy_as_misc_send_request(dev_p, cb,
-				client, CY_FUNCT_CB_USB_START, 0,
-				dev_p->func_cbs_usb,
-				CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-				cy_as_usb_func_callback);
-
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			return ret;
-		}
-
-destroy:
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	} else {
-		dev_p->usb_count++;
-		if (cb)
-			cb(handle, ret, client, CY_FUNCT_CB_USB_START, 0);
-	}
-
-	cy_as_device_clear_u_s_s_pending(dev_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_start);
-
-void
-cy_as_usb_reset(cy_as_device *dev_p)
-{
-	int i;
-
-	cy_as_device_clear_usb_connected(dev_p);
-
-	for (i = 0; i < sizeof(dev_p->usb_config) /
-		sizeof(dev_p->usb_config[0]); i++) {
-		/*
-		 * cancel all pending USB read/write operations, as it is
-		 * possible that the USB stack comes up in a different
-		 * configuration with a different set of endpoints.
-		 */
-		if (cy_as_device_is_usb_async_pending(dev_p, i))
-			cy_as_usb_cancel_async(dev_p,
-				(cy_as_end_point_number_t)i);
-
-		dev_p->usb_cb[i] = 0;
-		dev_p->usb_config[i].enabled = cy_false;
-	}
-
-	dev_p->usb_phy_config = 0;
-}
-
-/*
- * This function does all the API side clean-up associated
- * with CyAsUsbStop, without any communication with firmware.
- * This needs to be done when the device is being reset while
- * the USB stack is active.
- */
-void
-cy_as_usb_cleanup(cy_as_device *dev_p)
-{
-	if (dev_p->usb_count) {
-		cy_as_usb_reset_e_p0_state(dev_p);
-		cy_as_usb_reset(dev_p);
-		cy_as_hal_mem_set(dev_p->usb_config, 0,
-			sizeof(dev_p->usb_config));
-		cy_as_destroy_c_b_queue(dev_p->usb_func_cbs);
-
-		dev_p->usb_count = 0;
-	}
-}
-
-static cy_as_return_status_t
-my_handle_response_usb_stop(cy_as_device *dev_p,
-					cy_as_ll_request_response *req_p,
-					cy_as_ll_request_response *reply_p,
-					cy_as_return_status_t ret)
-{
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-	CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	/*
-	 * we successfully shutdown the stack, so
-	 * decrement to make the count zero.
-	 */
-	cy_as_usb_cleanup(dev_p);
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		cy_as_ll_register_request_callback(dev_p,
-			CY_RQT_USB_RQT_CONTEXT, 0);
-
-	cy_as_device_clear_u_s_s_pending(dev_p);
-
-	return ret;
-}
-
-/*
-* This function stops the USB stack. The USB stack is reference
-* counted so first is reference count is decremented. If the
-* reference count is then zero, a request is sent to the West
-* Bridge device to stop the USB stack on the West Bridge device.
-*/
-cy_as_return_status_t
-cy_as_usb_stop(cy_as_device_handle handle,
-			  cy_as_function_callback cb,
-			  uint32_t client)
-{
-	cy_as_ll_request_response *req_p = 0, *reply_p = 0;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_stop called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_usb_connected(dev_p))
-		return CY_AS_ERROR_USB_CONNECTED;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	if (cy_as_device_is_u_s_s_pending(dev_p))
-		return CY_AS_ERROR_STARTSTOP_PENDING;
-
-	cy_as_device_set_u_s_s_pending(dev_p);
-
-	if (dev_p->usb_count == 1) {
-		/* Create the request to send to the West Bridge device */
-		req_p = cy_as_ll_create_request(dev_p, CY_RQT_STOP_USB,
-			CY_RQT_USB_RQT_CONTEXT, 0);
-		if (req_p == 0) {
-			ret = CY_AS_ERROR_OUT_OF_MEMORY;
-			goto destroy;
-		}
-
-		/* Reserve space for the reply, the reply data will not
-		 * exceed one word */
-		reply_p = cy_as_ll_create_response(dev_p, 1);
-		if (reply_p == 0) {
-			ret = CY_AS_ERROR_OUT_OF_MEMORY;
-			goto destroy;
-		}
-
-		if (cb == 0) {
-			ret = cy_as_ll_send_request_wait_reply(dev_p,
-				req_p, reply_p);
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			return my_handle_response_usb_stop(dev_p,
-				req_p, reply_p, ret);
-		} else {
-			ret = cy_as_misc_send_request(dev_p, cb, client,
-				CY_FUNCT_CB_USB_STOP, 0, dev_p->func_cbs_usb,
-				CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-				cy_as_usb_func_callback);
-
-			if (ret != CY_AS_ERROR_SUCCESS)
-				goto destroy;
-
-			return ret;
-		}
-
-destroy:
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	} else if (dev_p->usb_count > 1) {
-		/*
-		 * reset all LE_ps to inactive state, after cleaning
-		 * up any pending async read/write calls.
-		 */
-		cy_as_usb_reset(dev_p);
-		dev_p->usb_count--;
-
-		if (cb)
-			cb(handle, ret, client, CY_FUNCT_CB_USB_STOP, 0);
-	}
-
-	cy_as_device_clear_u_s_s_pending(dev_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_stop);
-
-/*
-* This function registers a callback to be called when
-* USB events are processed
-*/
-cy_as_return_status_t
-cy_as_usb_register_callback(cy_as_device_handle handle,
-	cy_as_usb_event_callback callback)
-{
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_register_callback called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (!cy_as_device_is_configured(dev_p))
-		return CY_AS_ERROR_NOT_CONFIGURED;
-
-	if (!cy_as_device_is_firmware_loaded(dev_p))
-		return CY_AS_ERROR_NO_FIRMWARE;
-
-	dev_p->usb_event_cb = NULL;
-	dev_p->usb_event_cb_ms = callback;
-	return CY_AS_ERROR_SUCCESS;
-}
-EXPORT_SYMBOL(cy_as_usb_register_callback);
-
-static cy_as_return_status_t
-my_handle_response_no_data(cy_as_device *dev_p,
-					cy_as_ll_request_response *req_p,
-					cy_as_ll_request_response *reply_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-	CY_RESP_SUCCESS_FAILURE)
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-	else
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-static cy_as_return_status_t
-my_handle_response_connect(cy_as_device *dev_p,
-					   cy_as_ll_request_response *req_p,
-					   cy_as_ll_request_response *reply_p,
-					   cy_as_return_status_t ret)
-{
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-	CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	if (ret == CY_AS_ERROR_SUCCESS)
-		cy_as_device_set_usb_connected(dev_p);
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-
-/*
-* This method asks the West Bridge device to connect the
-* internal USB D+ and D- signals to the USB pins, thus
-* starting the enumeration processes if the external pins
-* are connected to a USB host. If the external pins are
-* not connected to a USB host, enumeration will begin as soon
-* as the USB pins are connected to a host.
-*/
-cy_as_return_status_t
-cy_as_usb_connect(cy_as_device_handle handle,
-				 cy_as_function_callback cb,
-				 uint32_t client)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_connect called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_SET_CONNECT_STATE, CY_RQT_USB_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* 1 = Connect request */
-	cy_as_ll_request_response__set_word(req_p, 0, 1);
-
-	/* Reserve space for the reply, the reply
-	 * data will not exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_connect(dev_p, req_p, reply_p, ret);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_USB_CONNECT, 0, dev_p->func_cbs_usb,
-			CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-			cy_as_usb_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_connect);
-
-static cy_as_return_status_t
-my_handle_response_disconnect(cy_as_device *dev_p,
-					   cy_as_ll_request_response *req_p,
-					   cy_as_ll_request_response *reply_p,
-					   cy_as_return_status_t ret)
-{
-	if (ret != CY_AS_ERROR_SUCCESS)
-		goto destroy;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-	CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	ret = cy_as_ll_request_response__get_word(reply_p, 0);
-	if (ret == CY_AS_ERROR_SUCCESS)
-		cy_as_device_clear_usb_connected(dev_p);
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-/*
-* This method forces a disconnect of the D+ and D- pins
-* external to the West Bridge device from the D+ and D-
-* signals internally, effectively disconnecting the West
-* Bridge device from any connected USB host.
-*/
-cy_as_return_status_t
-cy_as_usb_disconnect(cy_as_device_handle handle,
-					cy_as_function_callback cb,
-					uint32_t client)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_disconnect called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	if (!cy_as_device_is_usb_connected(dev_p))
-		return CY_AS_ERROR_USB_NOT_CONNECTED;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_SET_CONNECT_STATE, CY_RQT_USB_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0, 0);
-
-	/* Reserve space for the reply, the reply
-	 * data will not exceed two bytes */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_disconnect(dev_p,
-			req_p, reply_p, ret);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_USB_DISCONNECT, 0, dev_p->func_cbs_usb,
-			CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-			cy_as_usb_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return ret;
-	}
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_disconnect);
-
-static cy_as_return_status_t
-my_handle_response_set_enum_config(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-	CY_RESP_SUCCESS_FAILURE) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	ret = cy_as_ll_request_response__get_word(reply_p, 0);
-
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		/*
-		* we configured the west bridge device and
-		* enumeration is going to happen on the P port
-		* processor.  now we must enable endpoint zero
-		*/
-		cy_as_usb_end_point_config config;
-
-		config.dir = cy_as_usb_in_out;
-		config.type = cy_as_usb_control;
-		config.enabled = cy_true;
-
-		ret = cy_as_usb_set_end_point_config((cy_as_device_handle *)
-			dev_p, 0, &config);
-	}
-
-destroy:
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-
-		return ret;
-}
-
-/*
-* This method sets how the USB is enumerated and should
-* be called before the CyAsUsbConnect() is called.
-*/
-static cy_as_return_status_t
-my_usb_set_enum_config(cy_as_device *dev_p,
-					uint8_t bus_mask,
-					uint8_t media_mask,
-					cy_bool use_antioch_enumeration,
-					uint8_t mass_storage_interface,
-					uint8_t mtp_interface,
-					cy_bool mass_storage_callbacks,
-					cy_as_function_callback cb,
-					uint32_t client)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	cy_as_log_debug_message(6, "cy_as_usb_set_enum_config called");
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_usb_connected(dev_p))
-		return CY_AS_ERROR_USB_CONNECTED;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	/* if we are using MTP firmware:  */
-	if (dev_p->is_mtp_firmware == 1) {
-		/* we cannot enumerate MSC */
-		if (mass_storage_interface != 0)
-			return CY_AS_ERROR_INVALID_CONFIGURATION;
-
-		if (bus_mask == 0) {
-			if (mtp_interface != 0)
-				return CY_AS_ERROR_INVALID_CONFIGURATION;
-		} else if (bus_mask == 2) {
-			/* enable EP 1 as it will be used */
-			cy_as_dma_enable_end_point(dev_p, 1, cy_true,
-				cy_as_direction_in);
-			dev_p->usb_config[1].enabled = cy_true;
-			dev_p->usb_config[1].dir = cy_as_usb_in;
-			dev_p->usb_config[1].type = cy_as_usb_int;
-		} else {
-			return CY_AS_ERROR_INVALID_CONFIGURATION;
-		}
-	/* if we are not using MTP firmware, we cannot enumerate MTP */
-	} else if (mtp_interface != 0)
-		return CY_AS_ERROR_INVALID_CONFIGURATION;
-
-	/*
-	* if we are not enumerating mass storage, we should
-	* not be providing an interface number.
-	*/
-	if (bus_mask == 0 && mass_storage_interface != 0)
-		return CY_AS_ERROR_INVALID_CONFIGURATION;
-
-	/*
-	* if we are going to use mtp_interface, bus mask must be 2.
-	*/
-	if (mtp_interface != 0 && bus_mask != 2)
-		return CY_AS_ERROR_INVALID_CONFIGURATION;
-
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_SET_USB_CONFIG, CY_RQT_USB_RQT_CONTEXT, 4);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* Marshal the structure */
-	cy_as_ll_request_response__set_word(req_p, 0,
-		(uint16_t)((media_mask << 8) | bus_mask));
-	cy_as_ll_request_response__set_word(req_p, 1,
-		(uint16_t)use_antioch_enumeration);
-	cy_as_ll_request_response__set_word(req_p, 2,
-		dev_p->is_mtp_firmware ? mtp_interface :
-			mass_storage_interface);
-	cy_as_ll_request_response__set_word(req_p, 3,
-		(uint16_t)mass_storage_callbacks);
-
-	/* Reserve space for the reply, the reply
-	 * data will not exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_set_enum_config(dev_p,
-					req_p, reply_p);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_USB_SETENUMCONFIG,  0, dev_p->func_cbs_usb,
-			CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-			cy_as_usb_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-/*
- * This method sets how the USB is enumerated and should
- * be called before the CyAsUsbConnect() is called.
- */
-cy_as_return_status_t
-cy_as_usb_set_enum_config(cy_as_device_handle handle,
-					   cy_as_usb_enum_control *config_p,
-					   cy_as_function_callback cb,
-					   uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	uint8_t bus_mask, media_mask;
-	uint32_t bus, device;
-	cy_as_return_status_t ret;
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if ((cy_as_device_is_in_callback(dev_p))  && (cb != 0))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	/* Since we are mapping the media types to bus with NAND to 0
-	 * and the rest to 1, and we are only allowing for enumerating
-	 * all the devices on a bus we just scan the array for any
-	 * positions where there a device is enabled and mark the bus
-	 * to be enumerated.
-	 */
-	bus_mask   = 0;
-	media_mask = 0;
-	for (bus = 0; bus < CY_AS_MAX_BUSES; bus++) {
-		for (device = 0; device < CY_AS_MAX_STORAGE_DEVICES; device++) {
-			if (config_p->devices_to_enumerate[bus][device] ==
-			cy_true) {
-				bus_mask   |= (0x01 << bus);
-				media_mask |= dev_p->media_supported[bus];
-				media_mask |= dev_p->media_supported[bus];
-			}
-		}
-	}
-
-	return my_usb_set_enum_config(dev_p, bus_mask, media_mask,
-			config_p->antioch_enumeration,
-			config_p->mass_storage_interface,
-			config_p->mtp_interface,
-			config_p->mass_storage_callbacks,
-			cb,
-			client
-		);
-}
-EXPORT_SYMBOL(cy_as_usb_set_enum_config);
-
-static cy_as_return_status_t
-my_handle_response_get_enum_config(cy_as_device *dev_p,
-			cy_as_ll_request_response *req_p,
-			cy_as_ll_request_response *reply_p,
-			void *config_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint16_t val;
-	uint8_t bus_mask;
-	uint32_t bus;
-
-	if (cy_as_ll_request_response__get_code(reply_p) !=
-	CY_RESP_USB_CONFIG) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	/* Marshal the reply */
-	if (req_p->flags & CY_AS_REQUEST_RESPONSE_MS) {
-		uint32_t device;
-		cy_bool state;
-		cy_as_usb_enum_control *ms_config_p =
-			(cy_as_usb_enum_control *)config_p;
-
-		bus_mask = (uint8_t)
-			(cy_as_ll_request_response__get_word
-			(reply_p, 0) & 0xFF);
-		for (bus = 0; bus < CY_AS_MAX_BUSES; bus++)  {
-			if (bus_mask & (1 << bus))
-				state = cy_true;
-			else
-				state = cy_false;
-
-			for (device = 0; device < CY_AS_MAX_STORAGE_DEVICES;
-				device++)
-				ms_config_p->devices_to_enumerate[bus][device]
-					= state;
-		}
-
-		ms_config_p->antioch_enumeration =
-			(cy_bool)cy_as_ll_request_response__get_word
-				(reply_p, 1);
-
-		val = cy_as_ll_request_response__get_word(reply_p, 2);
-		if (dev_p->is_mtp_firmware) {
-			ms_config_p->mass_storage_interface = 0;
-			ms_config_p->mtp_interface = (uint8_t)(val & 0xFF);
-		} else {
-			ms_config_p->mass_storage_interface =
-				(uint8_t)(val & 0xFF);
-			ms_config_p->mtp_interface = 0;
-		}
-		ms_config_p->mass_storage_callbacks = (cy_bool)(val >> 8);
-
-		/*
-		* firmware returns an invalid interface number for mass storage,
-		* if mass storage is not enabled. this needs to be converted to
-		* zero to match the input configuration.
-		*/
-		if (bus_mask == 0) {
-			if (dev_p->is_mtp_firmware)
-				ms_config_p->mtp_interface = 0;
-			else
-				ms_config_p->mass_storage_interface = 0;
-		}
-	} else {
-		cy_as_usb_enum_control_dep *ex_config_p =
-			(cy_as_usb_enum_control_dep *)config_p;
-
-		ex_config_p->enum_mass_storage = (uint8_t)
-			((cy_as_ll_request_response__get_word
-				(reply_p, 0) >> 8) & 0xFF);
-		ex_config_p->antioch_enumeration = (cy_bool)
-			cy_as_ll_request_response__get_word(reply_p, 1);
-
-		val = cy_as_ll_request_response__get_word(reply_p, 2);
-		ex_config_p->mass_storage_interface = (uint8_t)(val & 0xFF);
-		ex_config_p->mass_storage_callbacks = (cy_bool)(val >> 8);
-
-		/*
-		* firmware returns an invalid interface number for mass
-		* storage, if mass storage is not enabled. this needs to
-		* be converted to zero to match the input configuration.
-		*/
-		if (ex_config_p->enum_mass_storage == 0)
-			ex_config_p->mass_storage_interface = 0;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-/*
-* This sets up the request for the enumerateion configuration
-* information, based on if the request is from the old pre-1.2
-* functions.
-*/
-static cy_as_return_status_t
-my_usb_get_enum_config(cy_as_device_handle handle,
-					uint16_t req_flags,
-					void *config_p,
-					cy_as_function_callback cb,
-					uint32_t client)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_get_enum_config called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_GET_USB_CONFIG, CY_RQT_USB_RQT_CONTEXT, 0);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* Reserve space for the reply, the reply data
-	 * will not exceed two bytes */
-	reply_p = cy_as_ll_create_response(dev_p, 3);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		/* we need to know the type of request to
-		 * know how to manage the data */
-		req_p->flags |= req_flags;
-		return my_handle_response_get_enum_config(dev_p,
-			req_p, reply_p, config_p);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_USB_GETENUMCONFIG, config_p,
-			dev_p->func_cbs_usb, req_flags, req_p, reply_p,
-			cy_as_usb_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-/*
- * This method returns the enumerateion configuration information
- * from the West Bridge device. Generally this is not used by
- * client software but is provided mostly for debug information.
- * We want a method to read all state information from the device.
- */
-cy_as_return_status_t
-cy_as_usb_get_enum_config(cy_as_device_handle handle,
-					   cy_as_usb_enum_control *config_p,
-					   cy_as_function_callback cb,
-					   uint32_t client)
-{
-	return my_usb_get_enum_config(handle,
-		CY_AS_REQUEST_RESPONSE_MS, config_p, cb, client);
-}
-EXPORT_SYMBOL(cy_as_usb_get_enum_config);
-
-/*
-* This method sets the USB descriptor for a given entity.
-*/
-cy_as_return_status_t
-cy_as_usb_set_descriptor(cy_as_device_handle handle,
-					   cy_as_usb_desc_type type,
-					   uint8_t index,
-					   void *desc_p,
-					   uint16_t length,
-					   cy_as_function_callback cb,
-					   uint32_t client)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint16_t pktlen;
-
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_set_descriptor called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	if (length > CY_AS_MAX_USB_DESCRIPTOR_SIZE)
-		return CY_AS_ERROR_INVALID_DESCRIPTOR;
-
-	pktlen = (uint16_t)length / 2;
-	if (length % 2)
-		pktlen++;
-	pktlen += 2; /* 1 for type, 1 for length */
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_SET_DESCRIPTOR,
-		CY_RQT_USB_RQT_CONTEXT, (uint16_t)pktlen);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		(uint16_t)((uint8_t)type | (index << 8)));
-	cy_as_ll_request_response__set_word(req_p, 1,
-		(uint16_t)length);
-	cy_as_ll_request_response__pack(req_p, 2, length, desc_p);
-
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_no_data(dev_p, req_p, reply_p);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_USB_SETDESCRIPTOR, 0, dev_p->func_cbs_usb,
-			CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-			cy_as_usb_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_set_descriptor);
-
-/*
- * This method clears all descriptors that were previously
- * stored on the West Bridge through CyAsUsbSetDescriptor calls.
- */
-cy_as_return_status_t
-cy_as_usb_clear_descriptors(cy_as_device_handle handle,
-					   cy_as_function_callback cb,
-					   uint32_t client)
-{
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_clear_descriptors called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if ((cy_as_device_is_in_callback(dev_p)) && (cb == 0))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_CLEAR_DESCRIPTORS, CY_RQT_USB_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_no_data(dev_p, req_p, reply_p);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_USB_CLEARDESCRIPTORS, 0,
-			dev_p->func_cbs_usb,
-			CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-			cy_as_usb_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_clear_descriptors);
-
-static cy_as_return_status_t
-my_handle_response_get_descriptor(cy_as_device *dev_p,
-					cy_as_ll_request_response *req_p,
-					cy_as_ll_request_response *reply_p,
-					cy_as_get_descriptor_data *data)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	 uint32_t retlen;
-
-	if (cy_as_ll_request_response__get_code(reply_p) ==
-	CY_RESP_SUCCESS_FAILURE) {
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-		goto destroy;
-	} else if (cy_as_ll_request_response__get_code(reply_p) !=
-	CY_RESP_USB_DESCRIPTOR) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	retlen = cy_as_ll_request_response__get_word(reply_p, 0);
-	if (retlen > data->length) {
-		ret = CY_AS_ERROR_INVALID_SIZE;
-		goto destroy;
-	}
-
-	ret = CY_AS_ERROR_SUCCESS;
-	cy_as_ll_request_response__unpack(reply_p, 1,
-		retlen, data->desc_p);
-
-destroy:
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-
-		return ret;
-}
-
-/*
-* This method retreives the USB descriptor for a given type.
-*/
-cy_as_return_status_t
-cy_as_usb_get_descriptor(cy_as_device_handle handle,
-					   cy_as_usb_desc_type type,
-					   uint8_t index,
-					   cy_as_get_descriptor_data *data,
-					   cy_as_function_callback cb,
-					   uint32_t client)
-{
-	cy_as_return_status_t ret;
-	cy_as_ll_request_response *req_p , *reply_p;
-
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_get_descriptor called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_GET_DESCRIPTOR, CY_RQT_USB_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		(uint16_t)((uint8_t)type | (index << 8)));
-
-	/* Add one for the length field */
-	reply_p = cy_as_ll_create_response(dev_p,
-		CY_AS_MAX_USB_DESCRIPTOR_SIZE + 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(
-				dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return my_handle_response_get_descriptor(dev_p,
-			req_p, reply_p, data);
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_USB_GETDESCRIPTOR, data,
-			dev_p->func_cbs_usb,
-			CY_AS_REQUEST_RESPONSE_EX, req_p,
-			reply_p,  cy_as_usb_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_get_descriptor);
-
-cy_as_return_status_t
-cy_as_usb_set_physical_configuration(cy_as_device_handle handle,
-	uint8_t config)
-{
-	cy_as_return_status_t ret;
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6,
-		"cy_as_usb_set_physical_configuration called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_usb_connected(dev_p))
-		return CY_AS_ERROR_USB_CONNECTED;
-
-	if (config < 1 || config > 12)
-		return CY_AS_ERROR_INVALID_CONFIGURATION;
-
-	dev_p->usb_phy_config = config;
-
-	return CY_AS_ERROR_SUCCESS;
-}
-EXPORT_SYMBOL(cy_as_usb_set_physical_configuration);
-
-static cy_bool
-is_physical_valid(uint8_t config, cy_as_end_point_number_t ep)
-{
-	static uint8_t validmask[12] = {
-		0x0f,	   /* Config  1 - 1, 2, 3, 4 */
-		0x07,	   /* Config  2 - 1, 2, 3 */
-		0x07,	   /* Config  3 - 1, 2, 3 */
-		0x0d,	   /* Config  4 - 1, 3, 4 */
-		0x05,	   /* Config  5 - 1, 3 */
-		0x05,	   /* Config  6 - 1, 3 */
-		0x0d,	   /* Config  7 - 1, 3, 4 */
-		0x05,	   /* Config  8 - 1, 3 */
-		0x05,	   /* Config  9 - 1, 3 */
-		0x0d,	   /* Config 10 - 1, 3, 4 */
-		0x09,	   /* Config 11 - 1, 4 */
-		0x01		/* Config 12 - 1 */
-	};
-
-	return (validmask[config - 1] & (1 << (ep - 1))) ? cy_true : cy_false;
-}
-
-/*
-* This method sets the configuration for an endpoint
-*/
-cy_as_return_status_t
-cy_as_usb_set_end_point_config(cy_as_device_handle handle,
-	cy_as_end_point_number_t ep, cy_as_usb_end_point_config *config_p)
-{
-	cy_as_return_status_t ret;
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_set_end_point_config called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_usb_connected(dev_p))
-		return CY_AS_ERROR_USB_CONNECTED;
-
-	if (ep >= 16 || ep == 2 || ep == 4 || ep == 6 || ep == 8)
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	if (ep == 0) {
-		/* Endpoint 0 must be 64 byte, dir IN/OUT,
-		 * and control type */
-		if (config_p->dir != cy_as_usb_in_out ||
-			config_p->type != cy_as_usb_control)
-			return CY_AS_ERROR_INVALID_CONFIGURATION;
-	} else if (ep == 1) {
-		if ((dev_p->is_mtp_firmware == 1) &&
-		(dev_p->usb_config[1].enabled == cy_true)) {
-			return CY_AS_ERROR_INVALID_ENDPOINT;
-		}
-
-		/*
-		 * EP1 can only be used either as an OUT ep, or as an IN ep.
-		 */
-		if ((config_p->type == cy_as_usb_control) ||
-			(config_p->type == cy_as_usb_iso) ||
-			(config_p->dir == cy_as_usb_in_out))
-			return CY_AS_ERROR_INVALID_CONFIGURATION;
-	} else {
-		if (config_p->dir == cy_as_usb_in_out ||
-			config_p->type == cy_as_usb_control)
-			return CY_AS_ERROR_INVALID_CONFIGURATION;
-
-		if (!is_physical_valid(dev_p->usb_phy_config,
-			config_p->physical))
-			return CY_AS_ERROR_INVALID_PHYSICAL_ENDPOINT;
-
-		/*
-		* ISO endpoints must be on E_ps 3, 5, 7 or 9 as
-		* they need to align directly with the underlying
-		* physical endpoint.
-		*/
-		if (config_p->type == cy_as_usb_iso) {
-			if (ep != 3 && ep != 5 && ep != 7 && ep != 9)
-				return CY_AS_ERROR_INVALID_CONFIGURATION;
-
-			if (ep == 3 && config_p->physical != 1)
-				return CY_AS_ERROR_INVALID_CONFIGURATION;
-
-			if (ep == 5 && config_p->physical != 2)
-				return CY_AS_ERROR_INVALID_CONFIGURATION;
-
-			if (ep == 7 && config_p->physical != 3)
-				return CY_AS_ERROR_INVALID_CONFIGURATION;
-
-			if (ep == 9 && config_p->physical != 4)
-				return CY_AS_ERROR_INVALID_CONFIGURATION;
-		}
-	}
-
-	/* Store the configuration information until a
-	 * CyAsUsbCommitConfig is done */
-	dev_p->usb_config[ep] = *config_p;
-
-	/* If the endpoint is enabled, enable DMA associated
-	 * with the endpoint */
-	/*
-	* we make some assumptions that we check here.  we assume
-	* that the direction fields for the DMA module are the same
-	* values as the direction values for the USB module.
-	*/
-	cy_as_hal_assert((int)cy_as_usb_in == (int)cy_as_direction_in);
-	cy_as_hal_assert((int)cy_as_usb_out == (int)cy_as_direction_out);
-	cy_as_hal_assert((int)cy_as_usb_in_out == (int)cy_as_direction_in_out);
-
-	return cy_as_dma_enable_end_point(dev_p, ep,
-		config_p->enabled, (cy_as_dma_direction)config_p->dir);
-}
-EXPORT_SYMBOL(cy_as_usb_set_end_point_config);
-
-cy_as_return_status_t
-cy_as_usb_get_end_point_config(cy_as_device_handle handle,
-	cy_as_end_point_number_t ep, cy_as_usb_end_point_config *config_p)
-{
-	cy_as_return_status_t ret;
-
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_get_end_point_config called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (ep >= 16 || ep == 2 || ep == 4 || ep == 6 || ep == 8)
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	*config_p = dev_p->usb_config[ep];
-
-	return CY_AS_ERROR_SUCCESS;
-}
-EXPORT_SYMBOL(cy_as_usb_get_end_point_config);
-
-/*
-* Commit the configuration of the various endpoints to the hardware.
-*/
-cy_as_return_status_t
-cy_as_usb_commit_config(cy_as_device_handle handle,
-					  cy_as_function_callback cb,
-					  uint32_t client)
-{
-	uint32_t i;
-	cy_as_return_status_t ret;
-	cy_as_ll_request_response *req_p , *reply_p;
-	cy_as_device *dev_p;
-	uint16_t data;
-
-	cy_as_log_debug_message(6, "cy_as_usb_commit_config called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_usb_connected(dev_p))
-		return CY_AS_ERROR_USB_CONNECTED;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	/*
-	* this performs the mapping based on informatation that was
-	* previously stored on the device about the various endpoints
-	* and how they are configured. the output of this mapping is
-	* setting the the 14 register values contained in usb_lepcfg
-	* and usb_pepcfg
-	*/
-	ret = cy_as_usb_map_logical2_physical(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/*
-	* now, package the information about the various logical and
-	* physical endpoint configuration registers and send it
-	* across to the west bridge device.
-	*/
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_SET_USB_CONFIG_REGISTERS, CY_RQT_USB_RQT_CONTEXT, 8);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	cy_as_hal_print_message("USB configuration: %d\n",
-		dev_p->usb_phy_config);
-	cy_as_hal_print_message("EP1OUT: 0x%02x EP1IN: 0x%02x\n",
-		dev_p->usb_ep1cfg[0], dev_p->usb_ep1cfg[1]);
-	cy_as_hal_print_message("PEP registers: 0x%02x 0x%02x 0x%02x 0x%02x\n",
-		dev_p->usb_pepcfg[0], dev_p->usb_pepcfg[1],
-		dev_p->usb_pepcfg[2], dev_p->usb_pepcfg[3]);
-
-	cy_as_hal_print_message("LEP registers: 0x%02x 0x%02x 0x%02x "
-		"0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",
-		dev_p->usb_lepcfg[0], dev_p->usb_lepcfg[1],
-		dev_p->usb_lepcfg[2], dev_p->usb_lepcfg[3],
-		dev_p->usb_lepcfg[4], dev_p->usb_lepcfg[5],
-		dev_p->usb_lepcfg[6], dev_p->usb_lepcfg[7],
-		dev_p->usb_lepcfg[8], dev_p->usb_lepcfg[9]);
-
-	/* Write the EP1OUTCFG and EP1INCFG data in the first word. */
-	data = (uint16_t)((dev_p->usb_ep1cfg[0] << 8) |
-		dev_p->usb_ep1cfg[1]);
-	cy_as_ll_request_response__set_word(req_p, 0, data);
-
-	/* Write the PEP CFG data in the next 2 words */
-	for (i = 0; i < 4; i += 2) {
-		data = (uint16_t)((dev_p->usb_pepcfg[i] << 8) |
-			dev_p->usb_pepcfg[i + 1]);
-		cy_as_ll_request_response__set_word(req_p,
-			1 + i / 2, data);
-	}
-
-	/* Write the LEP CFG data in the next 5 words */
-	for (i = 0; i < 10; i += 2) {
-		data = (uint16_t)((dev_p->usb_lepcfg[i] << 8) |
-			dev_p->usb_lepcfg[i + 1]);
-		cy_as_ll_request_response__set_word(req_p,
-			3 + i / 2, data);
-	}
-
-	/* A single status word response type */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p,
-			req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		ret = my_handle_response_no_data(dev_p,
-			req_p, reply_p);
-
-		if (ret == CY_AS_ERROR_SUCCESS)
-			ret = cy_as_usb_setup_dma(dev_p);
-
-		return ret;
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_USB_COMMITCONFIG, 0, dev_p->func_cbs_usb,
-			CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-			cy_as_usb_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_commit_config);
-
-static void
-sync_request_callback(cy_as_device *dev_p,
-	cy_as_end_point_number_t ep, void *buf_p,
-	uint32_t size, cy_as_return_status_t err)
-{
-	(void)ep;
-	(void)buf_p;
-
-	dev_p->usb_error = err;
-	dev_p->usb_actual_cnt = size;
-}
-
-static void
-async_read_request_callback(cy_as_device *dev_p,
-	cy_as_end_point_number_t ep, void *buf_p,
-	uint32_t size, cy_as_return_status_t err)
-{
-	cy_as_device_handle h;
-
-	cy_as_log_debug_message(6,
-		"async_read_request_callback called");
-
-	h = (cy_as_device_handle)dev_p;
-
-	if (ep == 0 && cy_as_device_is_ack_delayed(dev_p)) {
-		dev_p->usb_pending_buffer = buf_p;
-		dev_p->usb_pending_size = size;
-		dev_p->usb_error = err;
-		cy_as_usb_ack_setup_packet(h, usb_ack_callback, 0);
-	} else {
-		cy_as_usb_io_callback cb;
-
-		cb = dev_p->usb_cb[ep];
-		dev_p->usb_cb[ep] = 0;
-		cy_as_device_clear_usb_async_pending(dev_p, ep);
-		if (cb)
-			cb(h, ep, size, buf_p, err);
-	}
-}
-
-static void
-async_write_request_callback(cy_as_device *dev_p,
-	cy_as_end_point_number_t ep, void *buf_p,
-	uint32_t size, cy_as_return_status_t err)
-{
-	cy_as_device_handle h;
-
-	cy_as_log_debug_message(6,
-		"async_write_request_callback called");
-
-	h = (cy_as_device_handle)dev_p;
-
-	if (ep == 0 && cy_as_device_is_ack_delayed(dev_p)) {
-		dev_p->usb_pending_buffer = buf_p;
-		dev_p->usb_pending_size = size;
-		dev_p->usb_error = err;
-
-		/* The west bridge protocol generates ZLPs as required. */
-		cy_as_usb_ack_setup_packet(h, usb_ack_callback, 0);
-	} else {
-		cy_as_usb_io_callback cb;
-
-		cb = dev_p->usb_cb[ep];
-		dev_p->usb_cb[ep] = 0;
-
-		cy_as_device_clear_usb_async_pending(dev_p, ep);
-		if (cb)
-			cb(h, ep, size, buf_p, err);
-	}
-}
-
-static void
-my_turbo_rqt_callback(cy_as_device *dev_p,
-					uint8_t context,
-					cy_as_ll_request_response *rqt,
-					cy_as_ll_request_response *resp,
-					cy_as_return_status_t stat)
-{
-	uint8_t code;
-
-	(void)context;
-	(void)stat;
-
-	/* The Handlers are responsible for Deleting the rqt and resp when
-	 * they are finished
-	 */
-	code = cy_as_ll_request_response__get_code(rqt);
-	switch (code) {
-	case CY_RQT_TURBO_SWITCH_ENDPOINT:
-		cy_as_hal_assert(stat == CY_AS_ERROR_SUCCESS);
-		cy_as_ll_destroy_request(dev_p, rqt);
-		cy_as_ll_destroy_response(dev_p, resp);
-		break;
-	default:
-		cy_as_hal_assert(cy_false);
-		break;
-	}
-}
-
-/* Send a mailbox request to prepare the endpoint for switching */
-static cy_as_return_status_t
-my_send_turbo_switch(cy_as_device *dev_p, uint32_t size, cy_bool pktread)
-{
-	cy_as_return_status_t ret;
-	cy_as_ll_request_response *req_p , *reply_p;
-
-	/* Create the request to send to the West Bridge device */
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_TURBO_SWITCH_ENDPOINT, CY_RQT_TUR_RQT_CONTEXT, 3);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* Reserve space for the reply, the reply data will
-	 * not exceed one word */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	cy_as_ll_request_response__set_word(req_p, 0,
-		(uint16_t)pktread);
-	cy_as_ll_request_response__set_word(req_p, 1,
-		(uint16_t)((size >> 16) & 0xFFFF));
-	cy_as_ll_request_response__set_word(req_p, 2,
-		(uint16_t)(size & 0xFFFF));
-
-	ret = cy_as_ll_send_request(dev_p, req_p,
-		reply_p, cy_false, my_turbo_rqt_callback);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_request(dev_p, reply_p);
-		return ret;
-	}
-
-	return CY_AS_ERROR_SUCCESS;
-}
-
-cy_as_return_status_t
-cy_as_usb_read_data(cy_as_device_handle handle,
-	cy_as_end_point_number_t ep, cy_bool pktread,
-	uint32_t dsize, uint32_t *dataread, void *data)
-{
-	cy_as_return_status_t ret;
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_read_data called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	if (ep >= 16 || ep == 4 || ep == 6 || ep == 8)
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	/* EP2 is available for reading when MTP is active */
-	if (dev_p->mtp_count == 0 && ep == CY_AS_MTP_READ_ENDPOINT)
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	/* If the endpoint is disabled, we cannot
-	 * write data to the endpoint */
-	if (!dev_p->usb_config[ep].enabled)
-		return CY_AS_ERROR_ENDPOINT_DISABLED;
-
-	if (dev_p->usb_config[ep].dir != cy_as_usb_out)
-		return CY_AS_ERROR_USB_BAD_DIRECTION;
-
-	ret = cy_as_dma_queue_request(dev_p, ep, data, dsize,
-		pktread, cy_true, sync_request_callback);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (ep == CY_AS_MTP_READ_ENDPOINT)  {
-		ret = my_send_turbo_switch(dev_p, dsize, pktread);
-		if (ret != CY_AS_ERROR_SUCCESS) {
-			cy_as_dma_cancel(dev_p, ep, ret);
-			return ret;
-		}
-
-		ret = cy_as_dma_drain_queue(dev_p, ep, cy_false);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			return ret;
-	} else {
-		ret = cy_as_dma_drain_queue(dev_p, ep, cy_true);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			return ret;
-	}
-
-	ret = dev_p->usb_error;
-	*dataread = dev_p->usb_actual_cnt;
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_read_data);
-
-cy_as_return_status_t
-cy_as_usb_read_data_async(cy_as_device_handle handle,
-	cy_as_end_point_number_t ep, cy_bool pktread,
-	uint32_t dsize, void *data, cy_as_usb_io_callback cb)
-{
-	cy_as_return_status_t ret;
-	uint32_t mask;
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_read_data_async called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (ep >= 16 || ep == 4 || ep == 6 || ep == 8)
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	/* EP2 is available for reading when MTP is active */
-	if (dev_p->mtp_count == 0 && ep == CY_AS_MTP_READ_ENDPOINT)
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	/* If the endpoint is disabled, we cannot
-	 * write data to the endpoint */
-	if (!dev_p->usb_config[ep].enabled)
-		return CY_AS_ERROR_ENDPOINT_DISABLED;
-
-	if (dev_p->usb_config[ep].dir != cy_as_usb_out &&
-		dev_p->usb_config[ep].dir != cy_as_usb_in_out)
-		return CY_AS_ERROR_USB_BAD_DIRECTION;
-
-	/*
-	* since async operations can be triggered by interrupt
-	* code, we must insure that we do not get multiple async
-	* operations going at one time and protect this test and
-	* set operation from interrupts.
-	*/
-	mask = cy_as_hal_disable_interrupts();
-	if (cy_as_device_is_usb_async_pending(dev_p, ep)) {
-		cy_as_hal_enable_interrupts(mask);
-		return CY_AS_ERROR_ASYNC_PENDING;
-	}
-	cy_as_device_set_usb_async_pending(dev_p, ep);
-
-	/*
-	* if this is for EP0, we set this bit to delay the
-	* ACK response until after this read has completed.
-	*/
-	if (ep == 0)
-		cy_as_device_set_ack_delayed(dev_p);
-
-	cy_as_hal_enable_interrupts(mask);
-
-	cy_as_hal_assert(dev_p->usb_cb[ep] == 0);
-	dev_p->usb_cb[ep] = cb;
-
-	ret = cy_as_dma_queue_request(dev_p, ep, data, dsize,
-		pktread, cy_true, async_read_request_callback);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (ep == CY_AS_MTP_READ_ENDPOINT)  {
-		ret = my_send_turbo_switch(dev_p, dsize, pktread);
-		if (ret != CY_AS_ERROR_SUCCESS) {
-			cy_as_dma_cancel(dev_p, ep, ret);
-			return ret;
-		}
-	} else {
-		/* Kick start the queue if it is not running */
-		cy_as_dma_kick_start(dev_p, ep);
-	}
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_read_data_async);
-
-cy_as_return_status_t
-cy_as_usb_write_data(cy_as_device_handle handle,
-	cy_as_end_point_number_t ep, uint32_t dsize, void *data)
-{
-	cy_as_return_status_t ret;
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_write_data called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	if (ep >= 16 || ep == 2 || ep == 4 || ep == 8)
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	/* EP6 is available for writing when MTP is active */
-	if (dev_p->mtp_count == 0 && ep == CY_AS_MTP_WRITE_ENDPOINT)
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	/* If the endpoint is disabled, we cannot
-	 * write data to the endpoint */
-	if (!dev_p->usb_config[ep].enabled)
-		return CY_AS_ERROR_ENDPOINT_DISABLED;
-
-	if (dev_p->usb_config[ep].dir != cy_as_usb_in &&
-		dev_p->usb_config[ep].dir != cy_as_usb_in_out)
-		return CY_AS_ERROR_USB_BAD_DIRECTION;
-
-	/* Write on Turbo endpoint */
-	if (ep == CY_AS_MTP_WRITE_ENDPOINT) {
-		cy_as_ll_request_response *req_p, *reply_p;
-
-		req_p = cy_as_ll_create_request(dev_p,
-			CY_RQT_TURBO_SEND_RESP_DATA_TO_HOST,
-			CY_RQT_TUR_RQT_CONTEXT, 3);
-		if (req_p == 0)
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-
-		cy_as_ll_request_response__set_word(req_p,
-			0, 0x0006); /* EP number to use. */
-		cy_as_ll_request_response__set_word(req_p,
-			1, (uint16_t)((dsize >> 16) & 0xFFFF));
-		cy_as_ll_request_response__set_word(req_p,
-			2, (uint16_t)(dsize & 0xFFFF));
-
-		/* Reserve space for the reply, the reply data
-		 * will not exceed one word */
-		reply_p = cy_as_ll_create_response(dev_p, 1);
-		if (reply_p == 0) {
-			cy_as_ll_destroy_request(dev_p, req_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-
-		if (dsize) {
-			ret = cy_as_dma_queue_request(dev_p,
-				ep, data, dsize, cy_false,
-				cy_false, sync_request_callback);
-			if (ret != CY_AS_ERROR_SUCCESS)
-				return ret;
-		}
-
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret == CY_AS_ERROR_SUCCESS) {
-			if (cy_as_ll_request_response__get_code(reply_p) !=
-			CY_RESP_SUCCESS_FAILURE)
-				ret = CY_AS_ERROR_INVALID_RESPONSE;
-			else
-				ret = cy_as_ll_request_response__get_word
-						(reply_p, 0);
-		}
-
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-
-		if (ret != CY_AS_ERROR_SUCCESS) {
-			if (dsize)
-				cy_as_dma_cancel(dev_p, ep, ret);
-			return ret;
-		}
-
-		/* If this is a zero-byte write, firmware will
-		 * handle it. there is no need to do any work here.
-		 */
-		if (!dsize)
-			return CY_AS_ERROR_SUCCESS;
-	} else {
-		ret = cy_as_dma_queue_request(dev_p, ep, data, dsize,
-			cy_false, cy_false, sync_request_callback);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			return ret;
-	}
-
-	if (ep != CY_AS_MTP_WRITE_ENDPOINT)
-		ret = cy_as_dma_drain_queue(dev_p, ep, cy_true);
-	else
-		ret = cy_as_dma_drain_queue(dev_p, ep, cy_false);
-
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	ret = dev_p->usb_error;
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_write_data);
-
-static void
-mtp_write_callback(
-		cy_as_device *dev_p,
-		uint8_t context,
-		cy_as_ll_request_response *rqt,
-		cy_as_ll_request_response *resp,
-		cy_as_return_status_t ret)
-{
-	cy_as_usb_io_callback cb;
-	cy_as_device_handle h = (cy_as_device_handle)dev_p;
-
-	cy_as_hal_assert(context == CY_RQT_TUR_RQT_CONTEXT);
-
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		if (cy_as_ll_request_response__get_code(resp) !=
-		CY_RESP_SUCCESS_FAILURE)
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-		else
-			ret = cy_as_ll_request_response__get_word(resp, 0);
-	}
-
-	/* If this was a zero byte transfer request, we can
-	 * call the callback from here. */
-	if ((cy_as_ll_request_response__get_word(rqt, 1) == 0) &&
-			(cy_as_ll_request_response__get_word(rqt, 2) == 0)) {
-		cb = dev_p->usb_cb[CY_AS_MTP_WRITE_ENDPOINT];
-		dev_p->usb_cb[CY_AS_MTP_WRITE_ENDPOINT] = 0;
-		cy_as_device_clear_usb_async_pending(dev_p,
-			CY_AS_MTP_WRITE_ENDPOINT);
-		if (cb)
-			cb(h, CY_AS_MTP_WRITE_ENDPOINT, 0, 0, ret);
-
-		goto destroy;
-	}
-
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		/* Firmware failed the request. Cancel the DMA transfer. */
-		cy_as_dma_cancel(dev_p, 0x06, CY_AS_ERROR_CANCELED);
-		dev_p->usb_cb[0x06] = 0;
-		cy_as_device_clear_usb_async_pending(dev_p, 0x06);
-	}
-
-destroy:
-	cy_as_ll_destroy_response(dev_p, resp);
-	cy_as_ll_destroy_request(dev_p, rqt);
-}
-
-cy_as_return_status_t
-cy_as_usb_write_data_async(cy_as_device_handle handle,
-	cy_as_end_point_number_t ep, uint32_t dsize, void *data,
-	cy_bool spacket, cy_as_usb_io_callback cb)
-{
-	uint32_t mask;
-	cy_as_return_status_t ret;
-	cy_as_device *dev_p;
-
-	cy_as_log_debug_message(6, "cy_as_usb_write_data_async called");
-
-	dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (ep >= 16 || ep == 2 || ep == 4 || ep == 8)
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	 /* EP6 is available for writing when MTP is active */
-	if (dev_p->mtp_count == 0 && ep == CY_AS_MTP_WRITE_ENDPOINT)
-		return CY_AS_ERROR_INVALID_ENDPOINT;
-
-	/* If the endpoint is disabled, we cannot
-	 * write data to the endpoint */
-	if (!dev_p->usb_config[ep].enabled)
-		return CY_AS_ERROR_ENDPOINT_DISABLED;
-
-	if (dev_p->usb_config[ep].dir != cy_as_usb_in &&
-		dev_p->usb_config[ep].dir != cy_as_usb_in_out)
-		return CY_AS_ERROR_USB_BAD_DIRECTION;
-
-	/*
-	* since async operations can be triggered by interrupt
-	* code, we must insure that we do not get multiple
-	* async operations going at one time and
-	* protect this test and set operation from interrupts.
-	*/
-	mask = cy_as_hal_disable_interrupts();
-	if (cy_as_device_is_usb_async_pending(dev_p, ep)) {
-		cy_as_hal_enable_interrupts(mask);
-		return CY_AS_ERROR_ASYNC_PENDING;
-	}
-
-	cy_as_device_set_usb_async_pending(dev_p, ep);
-
-	if (ep == 0)
-		cy_as_device_set_ack_delayed(dev_p);
-
-	cy_as_hal_enable_interrupts(mask);
-
-	cy_as_hal_assert(dev_p->usb_cb[ep] == 0);
-	dev_p->usb_cb[ep] = cb;
-	dev_p->usb_spacket[ep] = spacket;
-
-	/* Write on Turbo endpoint */
-	if (ep == CY_AS_MTP_WRITE_ENDPOINT) {
-		cy_as_ll_request_response *req_p, *reply_p;
-
-		req_p = cy_as_ll_create_request(dev_p,
-			CY_RQT_TURBO_SEND_RESP_DATA_TO_HOST,
-			CY_RQT_TUR_RQT_CONTEXT, 3);
-
-		if (req_p == 0)
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-
-		cy_as_ll_request_response__set_word(req_p, 0,
-			0x0006); /* EP number to use. */
-		cy_as_ll_request_response__set_word(req_p, 1,
-			(uint16_t)((dsize >> 16) & 0xFFFF));
-		cy_as_ll_request_response__set_word(req_p, 2,
-			(uint16_t)(dsize & 0xFFFF));
-
-		/* Reserve space for the reply, the reply data
-		 * will not exceed one word */
-		reply_p = cy_as_ll_create_response(dev_p, 1);
-		if (reply_p == 0) {
-			cy_as_ll_destroy_request(dev_p, req_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-
-		if (dsize) {
-			ret = cy_as_dma_queue_request(dev_p, ep, data,
-				dsize, cy_false, cy_false,
-				async_write_request_callback);
-			if (ret != CY_AS_ERROR_SUCCESS)
-				return ret;
-		}
-
-		ret = cy_as_ll_send_request(dev_p, req_p, reply_p,
-			cy_false, mtp_write_callback);
-		if (ret != CY_AS_ERROR_SUCCESS) {
-			if (dsize)
-				cy_as_dma_cancel(dev_p, ep, ret);
-			return ret;
-		}
-
-		/* Firmware will handle a zero byte transfer
-		 * without any DMA transfers. */
-		if (!dsize)
-			return CY_AS_ERROR_SUCCESS;
-	} else {
-		ret = cy_as_dma_queue_request(dev_p, ep, data, dsize,
-			cy_false, cy_false, async_write_request_callback);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			return ret;
-	}
-
-	/* Kick start the queue if it is not running */
-	if (ep != CY_AS_MTP_WRITE_ENDPOINT)
-		cy_as_dma_kick_start(dev_p, ep);
-
-	return CY_AS_ERROR_SUCCESS;
-}
-EXPORT_SYMBOL(cy_as_usb_write_data_async);
-
-static void
-my_usb_cancel_async_callback(
-				   cy_as_device *dev_p,
-				   uint8_t context,
-				   cy_as_ll_request_response *rqt,
-				   cy_as_ll_request_response *resp,
-				   cy_as_return_status_t ret)
-{
-	uint8_t ep;
-	(void)context;
-
-	ep = (uint8_t)cy_as_ll_request_response__get_word(rqt, 0);
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		if (cy_as_ll_request_response__get_code(resp) !=
-			CY_RESP_SUCCESS_FAILURE)
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-		else
-			ret = cy_as_ll_request_response__get_word(resp, 0);
-	}
-
-	cy_as_ll_destroy_request(dev_p, rqt);
-	cy_as_ll_destroy_response(dev_p, resp);
-
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		cy_as_dma_cancel(dev_p, ep, CY_AS_ERROR_CANCELED);
-		dev_p->usb_cb[ep] = 0;
-		cy_as_device_clear_usb_async_pending(dev_p, ep);
-	}
-}
-
-cy_as_return_status_t
-cy_as_usb_cancel_async(cy_as_device_handle handle,
-	cy_as_end_point_number_t ep)
-{
-	cy_as_return_status_t ret;
-	cy_as_ll_request_response *req_p, *reply_p;
-
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ep &= 0x7F;		 /* Remove the direction bit. */
-	if (!cy_as_device_is_usb_async_pending(dev_p, ep))
-		return CY_AS_ERROR_ASYNC_NOT_PENDING;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_in_suspend_mode(dev_p))
-		return CY_AS_ERROR_IN_SUSPEND;
-
-	if ((ep == CY_AS_MTP_WRITE_ENDPOINT) ||
-		(ep == CY_AS_MTP_READ_ENDPOINT)) {
-		/* Need firmware support for the cancel operation. */
-		req_p = cy_as_ll_create_request(dev_p,
-			CY_RQT_CANCEL_ASYNC_TRANSFER,
-			CY_RQT_TUR_RQT_CONTEXT, 1);
-
-		if (req_p == 0)
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-
-		reply_p = cy_as_ll_create_response(dev_p, 1);
-		if (reply_p == 0) {
-			cy_as_ll_destroy_request(dev_p, req_p);
-			return CY_AS_ERROR_OUT_OF_MEMORY;
-		}
-
-		cy_as_ll_request_response__set_word(req_p, 0,
-			(uint16_t)ep);
-
-		ret = cy_as_ll_send_request(dev_p, req_p, reply_p,
-			cy_false, my_usb_cancel_async_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS) {
-			cy_as_ll_destroy_request(dev_p, req_p);
-			cy_as_ll_destroy_response(dev_p, reply_p);
-			return ret;
-		}
-	} else {
-		ret = cy_as_dma_cancel(dev_p, ep, CY_AS_ERROR_CANCELED);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			return ret;
-
-		dev_p->usb_cb[ep] = 0;
-		cy_as_device_clear_usb_async_pending(dev_p, ep);
-	}
-
-	return CY_AS_ERROR_SUCCESS;
-}
-EXPORT_SYMBOL(cy_as_usb_cancel_async);
-
-static void
-cy_as_usb_ack_callback(
-				   cy_as_device *dev_p,
-				   uint8_t context,
-				   cy_as_ll_request_response *rqt,
-				   cy_as_ll_request_response *resp,
-				   cy_as_return_status_t ret)
-{
-	cy_as_func_c_b_node *node  = (cy_as_func_c_b_node *)
-		dev_p->func_cbs_usb->head_p;
-
-	(void)context;
-
-	if (ret == CY_AS_ERROR_SUCCESS) {
-		if (cy_as_ll_request_response__get_code(resp) !=
-		CY_RESP_SUCCESS_FAILURE)
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-		else
-			ret = cy_as_ll_request_response__get_word(resp, 0);
-	}
-
-	node->cb_p((cy_as_device_handle)dev_p, ret,
-		node->client_data, node->data_type, node->data);
-	cy_as_remove_c_b_node(dev_p->func_cbs_usb);
-
-	cy_as_ll_destroy_request(dev_p, rqt);
-	cy_as_ll_destroy_response(dev_p, resp);
-	cy_as_device_clear_ack_delayed(dev_p);
-}
-
-static cy_as_return_status_t
-cy_as_usb_ack_setup_packet(cy_as_device_handle handle,
-					  cy_as_function_callback	  cb,
-					  uint32_t client)
-{
-	cy_as_return_status_t ret;
-	cy_as_ll_request_response *req_p;
-	cy_as_ll_request_response *reply_p;
-	cy_as_func_c_b_node *cbnode;
-
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_in_callback(dev_p) && cb == 0)
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	cy_as_hal_assert(cb != 0);
-
-	cbnode = cy_as_create_func_c_b_node(cb, client);
-	if (cbnode == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	req_p = cy_as_ll_create_request(dev_p, 0,
-		CY_RQT_USB_RQT_CONTEXT, 2);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	cy_as_ll_init_request(req_p, CY_RQT_ACK_SETUP_PACKET,
-		CY_RQT_USB_RQT_CONTEXT, 1);
-	cy_as_ll_init_response(reply_p, 1);
-
-	req_p->flags |= CY_AS_REQUEST_RESPONSE_EX;
-
-	cy_as_insert_c_b_node(dev_p->func_cbs_usb, cbnode);
-
-	ret = cy_as_ll_send_request(dev_p, req_p, reply_p,
-		cy_false, cy_as_usb_ack_callback);
-
-	return ret;
-}
-
-/*
- * Flush all data in logical EP that is being NAK-ed or
- * Stall-ed, so that this does not continue to block data
- * on other LEPs that use the same physical EP.
- */
-static void
-cy_as_usb_flush_logical_e_p(
-		cy_as_device *dev_p,
-		uint16_t	ep)
-{
-	uint16_t addr, val, count;
-
-	addr = CY_AS_MEM_P0_EP2_DMA_REG + ep - 2;
-	val  = cy_as_hal_read_register(dev_p->tag, addr);
-
-	while (val) {
-		count = ((val & 0xFFF) + 1) / 2;
-		while (count--)
-			val = cy_as_hal_read_register(dev_p->tag, ep);
-
-		cy_as_hal_write_register(dev_p->tag, addr, 0);
-		val = cy_as_hal_read_register(dev_p->tag, addr);
-	}
-}
-
-static cy_as_return_status_t
-cy_as_usb_nak_stall_request(cy_as_device_handle handle,
-					   cy_as_end_point_number_t ep,
-					   uint16_t request,
-					   cy_bool state,
-					   cy_as_usb_function_callback cb,
-					   cy_as_function_callback fcb,
-					   uint32_t client)
-{
-	cy_as_return_status_t ret;
-	cy_as_ll_request_response *req_p , *reply_p;
-	uint16_t data;
-
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	if (cb)
-		cy_as_hal_assert(fcb == 0);
-	if (fcb)
-		cy_as_hal_assert(cb == 0);
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_in_callback(dev_p) && cb == 0 && fcb == 0)
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	req_p = cy_as_ll_create_request(dev_p,
-		request, CY_RQT_USB_RQT_CONTEXT, 2);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* A single status word response type */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	/* Set the endpoint */
-	data = (uint8_t)ep;
-	cy_as_ll_request_response__set_word(req_p, 0, data);
-
-	/* Set stall state to stalled */
-	cy_as_ll_request_response__set_word(req_p, 1, (uint8_t)state);
-
-	if (cb || fcb) {
-		void *cbnode;
-		cy_as_c_b_queue *queue;
-		if (cb) {
-			cbnode = cy_as_create_usb_func_c_b_node(cb, client);
-			queue = dev_p->usb_func_cbs;
-		} else {
-			cbnode = cy_as_create_func_c_b_node(fcb, client);
-			queue = dev_p->func_cbs_usb;
-			req_p->flags |= CY_AS_REQUEST_RESPONSE_EX;
-		}
-
-		if (cbnode == 0) {
-			ret = CY_AS_ERROR_OUT_OF_MEMORY;
-			goto destroy;
-		} else
-			cy_as_insert_c_b_node(queue, cbnode);
-
-
-		if (cy_as_device_is_setup_packet(dev_p)) {
-			/* No Ack is needed on a stall request on EP0 */
-			if ((state == cy_true) && (ep == 0)) {
-				cy_as_device_set_ep0_stalled(dev_p);
-			} else {
-				cy_as_device_set_ack_delayed(dev_p);
-				req_p->flags |=
-					CY_AS_REQUEST_RESPONSE_DELAY_ACK;
-			}
-		}
-
-		ret = cy_as_ll_send_request(dev_p, req_p,
-			reply_p, cy_false, cy_as_usb_func_callback);
-		if (ret != CY_AS_ERROR_SUCCESS) {
-			if (req_p->flags & CY_AS_REQUEST_RESPONSE_DELAY_ACK)
-				cy_as_device_rem_ack_delayed(dev_p);
-			cy_as_remove_c_b_tail_node(queue);
-
-			goto destroy;
-		}
-	} else {
-		ret = cy_as_ll_send_request_wait_reply(dev_p,
-			req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) !=
-		CY_RESP_SUCCESS_FAILURE) {
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-			goto destroy;
-		}
-
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-
-		if ((ret == CY_AS_ERROR_SUCCESS) &&
-			(request == CY_RQT_STALL_ENDPOINT)) {
-			if ((ep > 1) && (state != 0) &&
-				(dev_p->usb_config[ep].dir == cy_as_usb_out))
-				cy_as_usb_flush_logical_e_p(dev_p, ep);
-		}
-
-destroy:
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-	}
-
-	return ret;
-}
-
-static cy_as_return_status_t
-my_handle_response_get_stall(cy_as_device *dev_p,
-				cy_as_ll_request_response *req_p,
-				cy_as_ll_request_response *reply_p,
-				cy_bool *state_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint8_t code = cy_as_ll_request_response__get_code(reply_p);
-
-	if (code == CY_RESP_SUCCESS_FAILURE) {
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-		goto destroy;
-	} else if (code != CY_RESP_ENDPOINT_STALL) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	*state_p = (cy_bool)cy_as_ll_request_response__get_word(reply_p, 0);
-	ret = CY_AS_ERROR_SUCCESS;
-
-
-destroy:
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-
-		return ret;
-}
-
-static cy_as_return_status_t
-my_handle_response_get_nak(cy_as_device *dev_p,
-					   cy_as_ll_request_response *req_p,
-					   cy_as_ll_request_response *reply_p,
-					   cy_bool *state_p)
-{
-	cy_as_return_status_t ret = CY_AS_ERROR_SUCCESS;
-	uint8_t code = cy_as_ll_request_response__get_code(reply_p);
-
-	if (code == CY_RESP_SUCCESS_FAILURE) {
-		ret = cy_as_ll_request_response__get_word(reply_p, 0);
-		goto destroy;
-	} else if (code != CY_RESP_ENDPOINT_NAK) {
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		goto destroy;
-	}
-
-	*state_p = (cy_bool)cy_as_ll_request_response__get_word(reply_p, 0);
-	ret = CY_AS_ERROR_SUCCESS;
-
-
-destroy:
-		cy_as_ll_destroy_request(dev_p, req_p);
-		cy_as_ll_destroy_response(dev_p, reply_p);
-
-		return ret;
-}
-
-static cy_as_return_status_t
-cy_as_usb_get_nak_stall(cy_as_device_handle handle,
-				   cy_as_end_point_number_t ep,
-				   uint16_t request,
-				   uint16_t response,
-				   cy_bool *state_p,
-				   cy_as_function_callback cb,
-				   uint32_t client)
-{
-	cy_as_return_status_t ret;
-	cy_as_ll_request_response *req_p , *reply_p;
-	uint16_t data;
-
-	cy_as_device *dev_p = (cy_as_device *)handle;
-
-	(void)response;
-
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_in_callback(dev_p) && !cb)
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	req_p = cy_as_ll_create_request(dev_p, request,
-		CY_RQT_USB_RQT_CONTEXT, 1);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* Set the endpoint */
-	data = (uint8_t)ep;
-	cy_as_ll_request_response__set_word(req_p, 0, (uint16_t)ep);
-
-	/* A single status word response type */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p,
-			req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (request == CY_RQT_GET_STALL)
-			return my_handle_response_get_stall(dev_p,
-				req_p, reply_p, state_p);
-		else
-			return my_handle_response_get_nak(dev_p,
-				req_p, reply_p, state_p);
-
-	} else {
-		cy_as_funct_c_b_type type;
-
-		if (request == CY_RQT_GET_STALL)
-			type = CY_FUNCT_CB_USB_GETSTALL;
-		else
-			type = CY_FUNCT_CB_USB_GETNAK;
-
-		ret = cy_as_misc_send_request(dev_p, cb, client, type,
-			state_p, dev_p->func_cbs_usb, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_usb_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-
-cy_as_return_status_t
-cy_as_usb_set_nak(cy_as_device_handle handle,
-				cy_as_end_point_number_t ep,
-				cy_as_function_callback cb,
-				uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	/*
-	* we send the firmware the EP# with the appropriate direction
-	* bit, regardless of what the user gave us.
-	*/
-	ep &= 0x0f;
-	if (dev_p->usb_config[ep].dir == cy_as_usb_in)
-		ep |= 0x80;
-
-		if (dev_p->mtp_count > 0)
-				return CY_AS_ERROR_NOT_VALID_IN_MTP;
-
-	return cy_as_usb_nak_stall_request(handle, ep,
-		CY_RQT_ENDPOINT_SET_NAK, cy_true, 0, cb, client);
-}
-EXPORT_SYMBOL(cy_as_usb_set_nak);
-
-cy_as_return_status_t
-cy_as_usb_clear_nak(cy_as_device_handle handle,
-				  cy_as_end_point_number_t ep,
-				  cy_as_function_callback cb,
-				  uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	/*
-	* we send the firmware the EP# with the appropriate
-	* direction bit, regardless of what the user gave us.
-	*/
-	ep &= 0x0f;
-	if (dev_p->usb_config[ep].dir == cy_as_usb_in)
-		ep |= 0x80;
-
-		if (dev_p->mtp_count > 0)
-				return CY_AS_ERROR_NOT_VALID_IN_MTP;
-
-	return cy_as_usb_nak_stall_request(handle, ep,
-		CY_RQT_ENDPOINT_SET_NAK, cy_false, 0, cb, client);
-}
-EXPORT_SYMBOL(cy_as_usb_clear_nak);
-
-cy_as_return_status_t
-cy_as_usb_get_nak(cy_as_device_handle handle,
-				cy_as_end_point_number_t ep,
-				cy_bool *nak_p,
-				cy_as_function_callback cb,
-				uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	/*
-	* we send the firmware the EP# with the appropriate
-	* direction bit, regardless of what the user gave us.
-	*/
-	ep &= 0x0f;
-	if (dev_p->usb_config[ep].dir == cy_as_usb_in)
-		ep |= 0x80;
-
-		if (dev_p->mtp_count > 0)
-				return CY_AS_ERROR_NOT_VALID_IN_MTP;
-
-	return cy_as_usb_get_nak_stall(handle, ep,
-		CY_RQT_GET_ENDPOINT_NAK, CY_RESP_ENDPOINT_NAK,
-		nak_p, cb, client);
-}
-EXPORT_SYMBOL(cy_as_usb_get_nak);
-
-cy_as_return_status_t
-cy_as_usb_set_stall(cy_as_device_handle handle,
-				  cy_as_end_point_number_t ep,
-				  cy_as_function_callback cb,
-				  uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	/*
-	* we send the firmware the EP# with the appropriate
-	* direction bit, regardless of what the user gave us.
-	*/
-	ep &= 0x0f;
-	if (dev_p->usb_config[ep].dir == cy_as_usb_in)
-		ep |= 0x80;
-
-	if (dev_p->mtp_turbo_active)
-		return CY_AS_ERROR_NOT_VALID_DURING_MTP;
-
-	return cy_as_usb_nak_stall_request(handle, ep,
-		CY_RQT_STALL_ENDPOINT, cy_true, 0, cb, client);
-}
-EXPORT_SYMBOL(cy_as_usb_set_stall);
-
-cy_as_return_status_t
-cy_as_usb_clear_stall(cy_as_device_handle handle,
-					cy_as_end_point_number_t ep,
-					cy_as_function_callback cb,
-					uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	/*
-	* we send the firmware the EP# with the appropriate
-	* direction bit, regardless of what the user gave us.
-	*/
-	ep &= 0x0f;
-	if (dev_p->usb_config[ep].dir == cy_as_usb_in)
-		ep |= 0x80;
-
-	if (dev_p->mtp_turbo_active)
-		return CY_AS_ERROR_NOT_VALID_DURING_MTP;
-
-	return cy_as_usb_nak_stall_request(handle, ep,
-		CY_RQT_STALL_ENDPOINT, cy_false, 0, cb, client);
-}
-EXPORT_SYMBOL(cy_as_usb_clear_stall);
-
-cy_as_return_status_t
-cy_as_usb_get_stall(cy_as_device_handle handle,
-				  cy_as_end_point_number_t ep,
-				  cy_bool *stall_p,
-				  cy_as_function_callback cb,
-				  uint32_t client)
-{
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	/*
-	* we send the firmware the EP# with the appropriate
-	* direction bit, regardless of what the user gave us.
-	*/
-	ep &= 0x0f;
-	if (dev_p->usb_config[ep].dir == cy_as_usb_in)
-		ep |= 0x80;
-
-	if (dev_p->mtp_turbo_active)
-		return CY_AS_ERROR_NOT_VALID_DURING_MTP;
-
-	return cy_as_usb_get_nak_stall(handle, ep,
-		CY_RQT_GET_STALL, CY_RESP_ENDPOINT_STALL, stall_p, cb, client);
-}
-EXPORT_SYMBOL(cy_as_usb_get_stall);
-
-cy_as_return_status_t
-cy_as_usb_signal_remote_wakeup(cy_as_device_handle handle,
-		cy_as_function_callback cb,
-		uint32_t client)
-{
-	cy_as_return_status_t ret;
-	cy_as_ll_request_response *req_p , *reply_p;
-
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if (cy_as_device_is_in_callback(dev_p))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	if (dev_p->usb_last_event != cy_as_event_usb_suspend)
-		return CY_AS_ERROR_NOT_IN_SUSPEND;
-
-	req_p = cy_as_ll_create_request(dev_p,
-		CY_RQT_USB_REMOTE_WAKEUP, CY_RQT_USB_RQT_CONTEXT, 0);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* A single status word response type */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) ==
-			CY_RESP_SUCCESS_FAILURE)
-			ret = cy_as_ll_request_response__get_word(reply_p, 0);
-		else
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_USB_SIGNALREMOTEWAKEUP, 0,
-			dev_p->func_cbs_usb,
-			CY_AS_REQUEST_RESPONSE_EX, req_p,
-			reply_p, cy_as_usb_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_signal_remote_wakeup);
-
-cy_as_return_status_t
-cy_as_usb_set_m_s_report_threshold(cy_as_device_handle handle,
-		uint32_t wr_sectors,
-		uint32_t rd_sectors,
-		cy_as_function_callback cb,
-		uint32_t client)
-{
-	cy_as_return_status_t ret;
-	cy_as_ll_request_response *req_p , *reply_p;
-
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	if ((cb == 0) && (cy_as_device_is_in_callback(dev_p)))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	/* Check if the firmware version supports this feature. */
-	if ((dev_p->media_supported[0]) && (dev_p->media_supported[0] ==
-		(1 << cy_as_media_nand)))
-		return CY_AS_ERROR_NOT_SUPPORTED;
-
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_USB_STORAGE_MONITOR,
-		CY_RQT_USB_RQT_CONTEXT, 4);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* A single status word response type */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	/* Set the read and write count parameters into
-	 * the request structure. */
-	cy_as_ll_request_response__set_word(req_p, 0,
-		(uint16_t)((wr_sectors >> 16) & 0xFFFF));
-	cy_as_ll_request_response__set_word(req_p, 1,
-		(uint16_t)(wr_sectors & 0xFFFF));
-	cy_as_ll_request_response__set_word(req_p, 2,
-		(uint16_t)((rd_sectors >> 16) & 0xFFFF));
-	cy_as_ll_request_response__set_word(req_p, 3,
-		(uint16_t)(rd_sectors & 0xFFFF));
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) ==
-		CY_RESP_SUCCESS_FAILURE)
-			ret = cy_as_ll_request_response__get_word(reply_p, 0);
-		else
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_USB_SET_MSREPORT_THRESHOLD, 0,
-			dev_p->func_cbs_usb, CY_AS_REQUEST_RESPONSE_EX,
-			req_p, reply_p, cy_as_usb_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_set_m_s_report_threshold);
-
-cy_as_return_status_t
-cy_as_usb_select_m_s_partitions(
-		cy_as_device_handle		handle,
-		cy_as_bus_number_t		 bus,
-		uint32_t				device,
-		cy_as_usb_m_s_type_t		 type,
-		cy_as_function_callback	cb,
-		uint32_t				client)
-{
-	cy_as_return_status_t ret;
-	cy_as_ll_request_response *req_p , *reply_p;
-	uint16_t val;
-
-	cy_as_device *dev_p = (cy_as_device *)handle;
-	if (!dev_p || (dev_p->sig != CY_AS_DEVICE_HANDLE_SIGNATURE))
-		return CY_AS_ERROR_INVALID_HANDLE;
-
-	ret = is_usb_active(dev_p);
-	if (ret != CY_AS_ERROR_SUCCESS)
-		return ret;
-
-	/* This API has to be made before SetEnumConfig is called. */
-	if (dev_p->usb_config[0].enabled)
-		return CY_AS_ERROR_INVALID_CALL_SEQUENCE;
-
-	if ((cb == 0) && (cy_as_device_is_in_callback(dev_p)))
-		return CY_AS_ERROR_INVALID_IN_CALLBACK;
-
-	req_p = cy_as_ll_create_request(dev_p, CY_RQT_MS_PARTITION_SELECT,
-		CY_RQT_USB_RQT_CONTEXT, 2);
-	if (req_p == 0)
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-
-	/* A single status word response type */
-	reply_p = cy_as_ll_create_response(dev_p, 1);
-	if (reply_p == 0) {
-		cy_as_ll_destroy_request(dev_p, req_p);
-		return CY_AS_ERROR_OUT_OF_MEMORY;
-	}
-
-	/* Set the read and write count parameters into
-	 * the request structure. */
-	cy_as_ll_request_response__set_word(req_p, 0,
-		(uint16_t)((bus << 8) | device));
-
-	val = 0;
-	if ((type == cy_as_usb_m_s_unit0) || (type == cy_as_usb_m_s_both))
-		val |= 1;
-	if ((type == cy_as_usb_m_s_unit1) || (type == cy_as_usb_m_s_both))
-		val |= (1 << 8);
-
-	cy_as_ll_request_response__set_word(req_p, 1, val);
-
-	if (cb == 0) {
-		ret = cy_as_ll_send_request_wait_reply(dev_p, req_p, reply_p);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-
-		if (cy_as_ll_request_response__get_code(reply_p) ==
-		CY_RESP_SUCCESS_FAILURE)
-			ret = cy_as_ll_request_response__get_word(reply_p, 0);
-		else
-			ret = CY_AS_ERROR_INVALID_RESPONSE;
-	} else {
-		ret = cy_as_misc_send_request(dev_p, cb, client,
-			CY_FUNCT_CB_NODATA, 0, dev_p->func_cbs_usb,
-			CY_AS_REQUEST_RESPONSE_EX, req_p, reply_p,
-			cy_as_usb_func_callback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			goto destroy;
-		return ret;
-	}
-
-destroy:
-	cy_as_ll_destroy_request(dev_p, req_p);
-	cy_as_ll_destroy_response(dev_p, reply_p);
-
-	return ret;
-}
-EXPORT_SYMBOL(cy_as_usb_select_m_s_partitions);
-
-static void
-cy_as_usb_func_callback(
-					cy_as_device *dev_p,
-					uint8_t context,
-					cy_as_ll_request_response *rqt,
-					cy_as_ll_request_response *resp,
-					cy_as_return_status_t stat)
-{
-	cy_as_usb_func_c_b_node* node = (cy_as_usb_func_c_b_node *)
-		dev_p->usb_func_cbs->head_p;
-	cy_as_func_c_b_node* fnode = (cy_as_func_c_b_node *)
-		dev_p->func_cbs_usb->head_p;
-	cy_as_return_status_t  ret = CY_AS_ERROR_SUCCESS;
-
-	cy_as_device_handle	h = (cy_as_device_handle)dev_p;
-	cy_bool	delayed_ack = (rqt->flags & CY_AS_REQUEST_RESPONSE_DELAY_ACK)
-		== CY_AS_REQUEST_RESPONSE_DELAY_ACK;
-	cy_bool	ex_request = (rqt->flags & CY_AS_REQUEST_RESPONSE_EX)
-		== CY_AS_REQUEST_RESPONSE_EX;
-	cy_bool	ms_request = (rqt->flags & CY_AS_REQUEST_RESPONSE_MS)
-		== CY_AS_REQUEST_RESPONSE_MS;
-	uint8_t	code;
-	uint8_t	ep, state;
-
-	if (!ex_request && !ms_request) {
-		cy_as_hal_assert(dev_p->usb_func_cbs->count != 0);
-		cy_as_hal_assert(dev_p->usb_func_cbs->type ==
-			CYAS_USB_FUNC_CB);
-	} else {
-		cy_as_hal_assert(dev_p->func_cbs_usb->count != 0);
-		cy_as_hal_assert(dev_p->func_cbs_usb->type == CYAS_FUNC_CB);
-	}
-
-	(void)context;
-
-	/* The Handlers are responsible for Deleting the rqt and resp when
-	 * they are finished
-	 */
-	code = cy_as_ll_request_response__get_code(rqt);
-	switch (code) {
-	case CY_RQT_START_USB:
-		ret = my_handle_response_usb_start(dev_p, rqt, resp, stat);
-		break;
-	case CY_RQT_STOP_USB:
-		ret = my_handle_response_usb_stop(dev_p, rqt, resp, stat);
-		break;
-	case CY_RQT_SET_CONNECT_STATE:
-		if (!cy_as_ll_request_response__get_word(rqt, 0))
-			ret = my_handle_response_disconnect(
-				dev_p, rqt, resp, stat);
-		else
-			ret = my_handle_response_connect(
-				dev_p, rqt, resp, stat);
-		break;
-	case CY_RQT_GET_CONNECT_STATE:
-		break;
-	case CY_RQT_SET_USB_CONFIG:
-		ret = my_handle_response_set_enum_config(dev_p, rqt, resp);
-		break;
-	case CY_RQT_GET_USB_CONFIG:
-		cy_as_hal_assert(fnode->data != 0);
-		ret = my_handle_response_get_enum_config(dev_p,
-			rqt, resp, fnode->data);
-		break;
-	case CY_RQT_STALL_ENDPOINT:
-		ep	= (uint8_t)cy_as_ll_request_response__get_word(rqt, 0);
-		state = (uint8_t)cy_as_ll_request_response__get_word(rqt, 1);
-		ret = my_handle_response_no_data(dev_p, rqt, resp);
-		if ((ret == CY_AS_ERROR_SUCCESS) && (ep > 1) && (state != 0)
-			&& (dev_p->usb_config[ep].dir == cy_as_usb_out))
-			cy_as_usb_flush_logical_e_p(dev_p, ep);
-		break;
-	case CY_RQT_GET_STALL:
-		cy_as_hal_assert(fnode->data != 0);
-		ret = my_handle_response_get_stall(dev_p,
-			rqt, resp, (cy_bool *)fnode->data);
-		break;
-	case CY_RQT_SET_DESCRIPTOR:
-		ret = my_handle_response_no_data(dev_p, rqt, resp);
-		break;
-	case CY_RQT_GET_DESCRIPTOR:
-		cy_as_hal_assert(fnode->data != 0);
-		ret = my_handle_response_get_descriptor(dev_p,
-			rqt, resp, (cy_as_get_descriptor_data *)fnode->data);
-		break;
-	case CY_RQT_SET_USB_CONFIG_REGISTERS:
-		ret = my_handle_response_no_data(dev_p, rqt, resp);
-		if (ret == CY_AS_ERROR_SUCCESS)
-			ret = cy_as_usb_setup_dma(dev_p);
-		break;
-	case CY_RQT_ENDPOINT_SET_NAK:
-		ret = my_handle_response_no_data(dev_p, rqt, resp);
-		break;
-	case CY_RQT_GET_ENDPOINT_NAK:
-		cy_as_hal_assert(fnode->data != 0);
-		ret = my_handle_response_get_nak(dev_p,
-			rqt, resp, (cy_bool *)fnode->data);
-		break;
-	case CY_RQT_ACK_SETUP_PACKET:
-		break;
-	case CY_RQT_USB_REMOTE_WAKEUP:
-		ret = my_handle_response_no_data(dev_p, rqt, resp);
-		break;
-	case CY_RQT_CLEAR_DESCRIPTORS:
-		ret = my_handle_response_no_data(dev_p, rqt, resp);
-		break;
-	case CY_RQT_USB_STORAGE_MONITOR:
-		ret = my_handle_response_no_data(dev_p, rqt, resp);
-		break;
-	case CY_RQT_MS_PARTITION_SELECT:
-		ret = my_handle_response_no_data(dev_p, rqt, resp);
-		break;
-	default:
-		ret = CY_AS_ERROR_INVALID_RESPONSE;
-		cy_as_hal_assert(cy_false);
-		break;
-	}
-
-	/*
-	 * if the low level layer returns a direct error, use
-	 * the corresponding error code. if not, use the error
-	 * code based on the response from firmware.
-	 */
-	if (stat == CY_AS_ERROR_SUCCESS)
-		stat = ret;
-
-	if (ex_request || ms_request) {
-		fnode->cb_p((cy_as_device_handle)dev_p, stat,
-			fnode->client_data, fnode->data_type, fnode->data);
-		cy_as_remove_c_b_node(dev_p->func_cbs_usb);
-	} else {
-		node->cb_p((cy_as_device_handle)dev_p, stat,
-			node->client_data);
-		cy_as_remove_c_b_node(dev_p->usb_func_cbs);
-	}
-
-	if (delayed_ack) {
-		cy_as_hal_assert(cy_as_device_is_ack_delayed(dev_p));
-		cy_as_device_rem_ack_delayed(dev_p);
-
-		/*
-		 * send the ACK if required.
-		 */
-		if (!cy_as_device_is_ack_delayed(dev_p))
-			cy_as_usb_ack_setup_packet(h,
-				usb_ack_callback, 0);
-	}
-}
-
-
-/*[]*/
diff --git a/drivers/staging/westbridge/astoria/arch/arm/mach-omap2/cyashalomap_kernel.c b/drivers/staging/westbridge/astoria/arch/arm/mach-omap2/cyashalomap_kernel.c
deleted file mode 100644
index dd4cd412aeb5..000000000000
--- a/drivers/staging/westbridge/astoria/arch/arm/mach-omap2/cyashalomap_kernel.c
+++ /dev/null
@@ -1,2441 +0,0 @@
-/* Cypress WestBridge OMAP3430 Kernel Hal source file (cyashalomap_kernel.c)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor,
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifdef CONFIG_MACH_OMAP3_WESTBRIDGE_AST_PNAND_HAL
-
-#include <linux/fs.h>
-#include <linux/ioport.h>
-#include <linux/timer.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/scatterlist.h>
-#include <linux/mm.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-/* include seems broken moving for patch submission
- * #include <mach/mux.h>
- * #include <mach/gpmc.h>
- * #include <mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h>
- * #include <mach/westbridge/westbridge-omap3-pnand-hal/cyasomapdev_kernel.h>
- * #include <mach/westbridge/westbridge-omap3-pnand-hal/cyasmemmap.h>
- * #include <linux/westbridge/cyaserr.h>
- * #include <linux/westbridge/cyasregs.h>
- * #include <linux/westbridge/cyasdma.h>
- * #include <linux/westbridge/cyasintr.h>
- */
-#include <linux/../../arch/arm/plat-omap/include/plat/mux.h>
-#include <linux/../../arch/arm/plat-omap/include/plat/gpmc.h>
-#include "../plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h"
-#include "../plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasomapdev_kernel.h"
-#include "../plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasmemmap.h"
-#include "../../../include/linux/westbridge/cyaserr.h"
-#include "../../../include/linux/westbridge/cyasregs.h"
-#include "../../../include/linux/westbridge/cyasdma.h"
-#include "../../../include/linux/westbridge/cyasintr.h"
-
-#define HAL_REV "1.1.0"
-
-/*
- * uncomment to enable 16bit pnand interface
- */
-#define PNAND_16BIT_MODE
-
-/*
- * selects one of 3 versions of pnand_lbd_read()
- * PNAND_LBD_READ_NO_PFE - original 8/16 bit code
- *    reads through the gpmc CONTROLLER REGISTERS
- * ENABLE_GPMC_PF_ENGINE - USES GPMC PFE FIFO reads, in 8 bit mode,
- *     same speed as the above
- * PFE_LBD_READ_V2 - slightly diffrenet, performance same as above
- */
-#define PNAND_LBD_READ_NO_PFE
-/* #define ENABLE_GPMC_PF_ENGINE */
-/* #define  PFE_LBD_READ_V2 */
-
-/*
- * westbrige astoria ISR options to limit number of
- * back to back DMA transfers per ISR interrupt
- */
-#define MAX_DRQ_LOOPS_IN_ISR 4
-
-/*
- * debug prints enabling
- *#define DBGPRN_ENABLED
- *#define DBGPRN_DMA_SETUP_RD
- *#define DBGPRN_DMA_SETUP_WR
- */
-
-
-/*
- * For performance reasons, we handle storage endpoint transfers up to 4 KB
- * within the HAL itself.
- */
- #define CYASSTORAGE_WRITE_EP_NUM	(4)
- #define CYASSTORAGE_READ_EP_NUM	(8)
-
-/*
- *  size of DMA packet HAL can accept from Storage API
- *  HAL will fragment it into smaller chunks that the P port can accept
- */
-#define CYASSTORAGE_MAX_XFER_SIZE	(2*32768)
-
-/*
- *  P port MAX DMA packet size according to interface/ep configurartion
- */
-#define HAL_DMA_PKT_SZ 512
-
-#define is_storage_e_p(ep) (((ep) == 2) || ((ep) == 4) || \
-				((ep) == 6) || ((ep) == 8))
-
-/*
- * persistent, stores current GPMC interface cfg mode
- */
-static uint8_t pnand_16bit;
-
-/*
- * keep processing new WB DRQ in ISR until all handled (performance feature)
- */
-#define PROCESS_MULTIPLE_DRQ_IN_ISR (1)
-
-
-/*
- * ASTORIA PNAND IF COMMANDS, CASDO - READ, CASDI - WRITE
- */
-#define CASDO 0x05
-#define CASDI 0x85
-#define RDPAGE_B1   0x00
-#define RDPAGE_B2   0x30
-#define PGMPAGE_B1  0x80
-#define PGMPAGE_B2  0x10
-
-/*
- * The type of DMA operation, per endpoint
- */
-typedef enum cy_as_hal_dma_type {
-	cy_as_hal_read,
-	cy_as_hal_write,
-	cy_as_hal_none
-} cy_as_hal_dma_type;
-
-
-/*
- * SG list halpers defined in scaterlist.h
-#define sg_is_chain(sg)		((sg)->page_link & 0x01)
-#define sg_is_last(sg)		((sg)->page_link & 0x02)
-#define sg_chain_ptr(sg)	\
-	((struct scatterlist *) ((sg)->page_link & ~0x03))
-*/
-typedef struct cy_as_hal_endpoint_dma {
-	cy_bool buffer_valid;
-	uint8_t *data_p;
-	uint32_t size;
-	/*
-	 * sg_list_enabled - if true use, r/w DMA transfers use sg list,
-	 *		FALSE use pointer to a buffer
-	 * sg_p - pointer to the owner's sg list, of there is such
-	 *		(like blockdriver)
-	 * dma_xfer_sz - size of the next dma xfer on P port
-	 * seg_xfer_cnt -  counts xfered bytes for in current sg_list
-	 *		memory segment
-	 * req_xfer_cnt - total number of bytes transferred so far in
-	 *		current request
-	 * req_length - total request length
-	 */
-	bool sg_list_enabled;
-	struct scatterlist *sg_p;
-	uint16_t dma_xfer_sz;
-	uint32_t seg_xfer_cnt;
-	uint16_t req_xfer_cnt;
-	uint16_t req_length;
-	cy_as_hal_dma_type type;
-	cy_bool pending;
-} cy_as_hal_endpoint_dma;
-
-/*
- * The list of OMAP devices (should be one)
- */
-static cy_as_omap_dev_kernel *m_omap_list_p;
-
-/*
- * The callback to call after DMA operations are complete
- */
-static cy_as_hal_dma_complete_callback callback;
-
-/*
- * Pending data size for the endpoints
- */
-static cy_as_hal_endpoint_dma end_points[16];
-
-/*
- * Forward declaration
- */
-static void cy_handle_d_r_q_interrupt(cy_as_omap_dev_kernel *dev_p);
-
-static uint16_t intr_sequence_num;
-static uint8_t intr__enable;
-spinlock_t int_lock;
-
-static u32 iomux_vma;
-static u32 csa_phy;
-
-/*
- * gpmc I/O registers VMA
- */
-static u32 gpmc_base;
-
-/*
- * gpmc data VMA associated with CS4 (ASTORIA CS on GPMC)
- */
-static u32 gpmc_data_vma;
-static u32 ndata_reg_vma;
-static u32 ncmd_reg_vma;
-static u32 naddr_reg_vma;
-
-/*
- * fwd declarations
- */
-static void p_nand_lbd_read(u16 col_addr, u32 row_addr, u16 count, void *buff);
-static void p_nand_lbd_write(u16 col_addr, u32 row_addr, u16 count, void *buff);
-static inline u16 __attribute__((always_inline))
-			ast_p_nand_casdo_read(u8 reg_addr8);
-static inline void __attribute__((always_inline))
-			ast_p_nand_casdi_write(u8 reg_addr8, u16 data);
-
-/*
- * prints given number of omap registers
- */
-static void cy_as_hal_print_omap_regs(char *name_prefix,
-				u8 name_base, u32 virt_base, u16 count)
-{
-	u32 reg_val, reg_addr;
-	u16 i;
-	cy_as_hal_print_message(KERN_INFO "\n");
-	for (i = 0; i < count; i++) {
-
-		reg_addr = virt_base + (i*4);
-		/* use virtual addresses here*/
-		reg_val = __raw_readl(reg_addr);
-		cy_as_hal_print_message(KERN_INFO "%s_%d[%8.8x]=%8.8x\n",
-						name_prefix, name_base+i,
-						reg_addr, reg_val);
-	}
-}
-
-/*
- * setMUX function for a pad + additional pad flags
- */
-static u16 omap_cfg_reg_L(u32 pad_func_index)
-{
-	static u8 sanity_check = 1;
-
-	u32 reg_vma;
-	u16 cur_val, wr_val, rdback_val;
-
-	/*
-	 * do sanity check on the omap_mux_pin_cfg[] table
-	 */
-	cy_as_hal_print_message(KERN_INFO" OMAP pins user_pad cfg ");
-	if (sanity_check) {
-		if ((omap_mux_pin_cfg[END_OF_TABLE].name[0] == 'E') &&
-			(omap_mux_pin_cfg[END_OF_TABLE].name[1] == 'N') &&
-			(omap_mux_pin_cfg[END_OF_TABLE].name[2] == 'D')) {
-
-			cy_as_hal_print_message(KERN_INFO
-					"table is good.\n");
-		} else {
-			cy_as_hal_print_message(KERN_WARNING
-					"table is bad, fix it");
-		}
-		/*
-		 * do it only once
-		 */
-		sanity_check = 0;
-	}
-
-	/*
-	 * get virtual address to the PADCNF_REG
-	 */
-	reg_vma = (u32)iomux_vma + omap_mux_pin_cfg[pad_func_index].offset;
-
-	/*
-	 * add additional USER PU/PD/EN flags
-	 */
-	wr_val = omap_mux_pin_cfg[pad_func_index].mux_val;
-	cur_val = IORD16(reg_vma);
-
-	/*
-	 * PADCFG regs 16 bit long, packed into 32 bit regs,
-	 * can also be accessed as u16
-	 */
-	IOWR16(reg_vma, wr_val);
-	rdback_val = IORD16(reg_vma);
-
-	/*
-	 * in case if the caller wants to save the old value
-	 */
-	return wr_val;
-}
-
-#define BLKSZ_4K 0x1000
-
-/*
- * switch GPMC DATA bus mode
- */
-void cy_as_hal_gpmc_enable_16bit_bus(bool dbus16_enabled)
-{
-	uint32_t tmp32;
-
-	/*
-	 * disable gpmc CS4 operation 1st
-	 */
-	tmp32 = gpmc_cs_read_reg(AST_GPMC_CS,
-				GPMC_CS_CONFIG7) & ~GPMC_CONFIG7_CSVALID;
-	gpmc_cs_write_reg(AST_GPMC_CS, GPMC_CS_CONFIG7, tmp32);
-
-	/*
-	 * GPMC NAND data bus can be 8 or 16 bit wide
-	 */
-	if (dbus16_enabled) {
-		DBGPRN("enabling 16 bit bus\n");
-		gpmc_cs_write_reg(AST_GPMC_CS, GPMC_CS_CONFIG1,
-				(GPMC_CONFIG1_DEVICETYPE(2) |
-				GPMC_CONFIG1_WAIT_PIN_SEL(2) |
-				GPMC_CONFIG1_DEVICESIZE_16)
-				);
-	} else {
-		DBGPRN(KERN_INFO "enabling 8 bit bus\n");
-		gpmc_cs_write_reg(AST_GPMC_CS, GPMC_CS_CONFIG1,
-				(GPMC_CONFIG1_DEVICETYPE(2) |
-				GPMC_CONFIG1_WAIT_PIN_SEL(2))
-				);
-	}
-
-	/*
-	 * re-enable astoria CS operation on GPMC
-	 */
-	 gpmc_cs_write_reg(AST_GPMC_CS, GPMC_CS_CONFIG7,
-			(tmp32 | GPMC_CONFIG7_CSVALID));
-
-	/*
-	 *remember the state
-	 */
-	pnand_16bit = dbus16_enabled;
-}
-
-static int cy_as_hal_gpmc_init(void)
-{
-	u32 tmp32;
-	int err;
-	struct gpmc_timings	timings;
-
-	gpmc_base = (u32)ioremap_nocache(OMAP34XX_GPMC_BASE, BLKSZ_4K);
-	DBGPRN(KERN_INFO "kernel has gpmc_base=%x , val@ the base=%x",
-		gpmc_base, __raw_readl(gpmc_base)
-	);
-
-	/*
-	 * these are globals are full VMAs of the gpmc_base above
-	 */
-	ncmd_reg_vma = GPMC_VMA(AST_GPMC_NAND_CMD);
-	naddr_reg_vma = GPMC_VMA(AST_GPMC_NAND_ADDR);
-	ndata_reg_vma = GPMC_VMA(AST_GPMC_NAND_DATA);
-
-	/*
-	 * request GPMC CS for ASTORIA request
-	 */
-	if (gpmc_cs_request(AST_GPMC_CS, SZ_16M, (void *)&csa_phy) < 0) {
-		cy_as_hal_print_message(KERN_ERR "error failed to request"
-					"ncs4 for ASTORIA\n");
-			return -1;
-	} else {
-		DBGPRN(KERN_INFO "got phy_addr:%x for "
-				"GPMC CS%d GPMC_CFGREG7[CS4]\n",
-				 csa_phy, AST_GPMC_CS);
-	}
-
-	/*
-	 * request VM region for 4K addr space for chip select 4 phy address
-	 * technically we don't need it for NAND devices, but do it anyway
-	 * so that data read/write bus cycle can be triggered by reading
-	 * or writing this mem region
-	 */
-	if (!request_mem_region(csa_phy, BLKSZ_4K, "AST_OMAP_HAL")) {
-		err = -EBUSY;
-		cy_as_hal_print_message(KERN_ERR "error MEM region "
-					"request for phy_addr:%x failed\n",
-					csa_phy);
-			goto out_free_cs;
-	}
-
-	/*
-	 * REMAP mem region associated with our CS
-	 */
-	gpmc_data_vma = (u32)ioremap_nocache(csa_phy, BLKSZ_4K);
-	if (!gpmc_data_vma) {
-		err = -ENOMEM;
-		cy_as_hal_print_message(KERN_ERR "error- ioremap()"
-					"for phy_addr:%x failed", csa_phy);
-
-		goto out_release_mem_region;
-	}
-	cy_as_hal_print_message(KERN_INFO "ioremap(%x) returned vma=%x\n",
-							csa_phy, gpmc_data_vma);
-
-	gpmc_cs_write_reg(AST_GPMC_CS, GPMC_CS_CONFIG1,
-						(GPMC_CONFIG1_DEVICETYPE(2) |
-						GPMC_CONFIG1_WAIT_PIN_SEL(2)));
-
-	memset(&timings, 0, sizeof(timings));
-
-	/* cs timing */
-	timings.cs_on = WB_GPMC_CS_t_o_n;
-	timings.cs_wr_off = WB_GPMC_BUSCYC_t;
-	timings.cs_rd_off = WB_GPMC_BUSCYC_t;
-
-	/* adv timing */
-	timings.adv_on = WB_GPMC_ADV_t_o_n;
-	timings.adv_rd_off = WB_GPMC_BUSCYC_t;
-	timings.adv_wr_off = WB_GPMC_BUSCYC_t;
-
-	/* oe timing */
-	timings.oe_on = WB_GPMC_OE_t_o_n;
-	timings.oe_off = WB_GPMC_OE_t_o_f_f;
-	timings.access = WB_GPMC_RD_t_a_c_c;
-	timings.rd_cycle = WB_GPMC_BUSCYC_t;
-
-	/* we timing */
-	timings.we_on = WB_GPMC_WE_t_o_n;
-	timings.we_off = WB_GPMC_WE_t_o_f_f;
-	timings.wr_access = WB_GPMC_WR_t_a_c_c;
-	timings.wr_cycle = WB_GPMC_BUSCYC_t;
-
-	timings.page_burst_access = WB_GPMC_BUSCYC_t;
-	timings.wr_data_mux_bus = WB_GPMC_BUSCYC_t;
-	gpmc_cs_set_timings(AST_GPMC_CS, &timings);
-
-	cy_as_hal_print_omap_regs("GPMC_CONFIG", 1,
-			GPMC_VMA(GPMC_CFG_REG(1, AST_GPMC_CS)), 7);
-
-	/*
-	 * DISABLE cs4, NOTE GPMC REG7 is already configured
-	 * at this point by gpmc_cs_request
-	 */
-	tmp32 = gpmc_cs_read_reg(AST_GPMC_CS, GPMC_CS_CONFIG7) &
-						~GPMC_CONFIG7_CSVALID;
-	gpmc_cs_write_reg(AST_GPMC_CS, GPMC_CS_CONFIG7, tmp32);
-
-	/*
-	 * PROGRAM chip select Region, (see OMAP3430 TRM PAGE 1088)
-	 */
-	gpmc_cs_write_reg(AST_GPMC_CS, GPMC_CS_CONFIG7,
-					(AS_CS_MASK | AS_CS_BADDR));
-
-	/*
-	 * by default configure GPMC into 8 bit mode
-	 * (to match astoria default mode)
-	 */
-	gpmc_cs_write_reg(AST_GPMC_CS, GPMC_CS_CONFIG1,
-					(GPMC_CONFIG1_DEVICETYPE(2) |
-					GPMC_CONFIG1_WAIT_PIN_SEL(2)));
-
-	/*
-	 * ENABLE astoria cs operation on GPMC
-	 */
-	gpmc_cs_write_reg(AST_GPMC_CS, GPMC_CS_CONFIG7,
-					(tmp32 | GPMC_CONFIG7_CSVALID));
-
-	/*
-	 * No method currently exists to write this register through GPMC APIs
-	 * need to change WAIT2 polarity
-	 */
-	tmp32 = IORD32(GPMC_VMA(GPMC_CONFIG_REG));
-	tmp32 = tmp32 | NAND_FORCE_POSTED_WRITE_B | 0x40;
-	IOWR32(GPMC_VMA(GPMC_CONFIG_REG), tmp32);
-
-	tmp32 = IORD32(GPMC_VMA(GPMC_CONFIG_REG));
-	cy_as_hal_print_message("GPMC_CONFIG_REG=0x%x\n", tmp32);
-
-	return 0;
-
-out_release_mem_region:
-	release_mem_region(csa_phy, BLKSZ_4K);
-
-out_free_cs:
-	gpmc_cs_free(AST_GPMC_CS);
-
-	return err;
-}
-
-/*
- * west bridge astoria ISR (Interrupt handler)
- */
-static irqreturn_t cy_astoria_int_handler(int irq,
-				void *dev_id, struct pt_regs *regs)
-{
-	cy_as_omap_dev_kernel *dev_p;
-	uint16_t		  read_val = 0;
-	uint16_t		  mask_val = 0;
-
-	/*
-	* debug stuff, counts number of loops per one intr trigger
-	*/
-	uint16_t		  drq_loop_cnt = 0;
-	uint8_t		   irq_pin;
-	/*
-	 * flags to watch
-	 */
-	const uint16_t	sentinel = (CY_AS_MEM_P0_INTR_REG_MCUINT |
-				CY_AS_MEM_P0_INTR_REG_MBINT |
-				CY_AS_MEM_P0_INTR_REG_PMINT |
-				CY_AS_MEM_P0_INTR_REG_PLLLOCKINT);
-
-	/*
-	 * sample IRQ pin level (just for statistics)
-	 */
-	irq_pin = __gpio_get_value(AST_INT);
-
-	/*
-	 * this one just for debugging
-	 */
-	intr_sequence_num++;
-
-	/*
-	 * astoria device handle
-	 */
-	dev_p = dev_id;
-
-	/*
-	 * read Astoria intr register
-	 */
-	read_val = cy_as_hal_read_register((cy_as_hal_device_tag)dev_p,
-						CY_AS_MEM_P0_INTR_REG);
-
-	/*
-	 * save current mask value
-	 */
-	mask_val = cy_as_hal_read_register((cy_as_hal_device_tag)dev_p,
-						CY_AS_MEM_P0_INT_MASK_REG);
-
-	DBGPRN("<1>HAL__intr__enter:_seq:%d, P0_INTR_REG:%x\n",
-			intr_sequence_num, read_val);
-
-	/*
-	 * Disable WB interrupt signal generation while we are in ISR
-	 */
-	cy_as_hal_write_register((cy_as_hal_device_tag)dev_p,
-					CY_AS_MEM_P0_INT_MASK_REG, 0x0000);
-
-	/*
-	* this is a DRQ Interrupt
-	*/
-	if (read_val & CY_AS_MEM_P0_INTR_REG_DRQINT) {
-
-		do {
-			/*
-			 * handle DRQ interrupt
-			 */
-			drq_loop_cnt++;
-
-			cy_handle_d_r_q_interrupt(dev_p);
-
-			/*
-			 * spending to much time in ISR may impact
-			 * average system performance
-			 */
-			if (drq_loop_cnt >= MAX_DRQ_LOOPS_IN_ISR)
-				break;
-
-		/*
-		 * Keep processing if there is another DRQ int flag
-		 */
-		} while (cy_as_hal_read_register((cy_as_hal_device_tag)dev_p,
-					CY_AS_MEM_P0_INTR_REG) &
-					CY_AS_MEM_P0_INTR_REG_DRQINT);
-	}
-
-	if (read_val & sentinel)
-		cy_as_intr_service_interrupt((cy_as_hal_device_tag)dev_p);
-
-	DBGPRN("<1>_hal:_intr__exit seq:%d, mask=%4.4x,"
-			"int_pin:%d DRQ_jobs:%d\n",
-			intr_sequence_num,
-			mask_val,
-			irq_pin,
-			drq_loop_cnt);
-
-	/*
-	 * re-enable WB hw interrupts
-	 */
-	cy_as_hal_write_register((cy_as_hal_device_tag)dev_p,
-					CY_AS_MEM_P0_INT_MASK_REG, mask_val);
-
-	return IRQ_HANDLED;
-}
-
-static int cy_as_hal_configure_interrupts(void *dev_p)
-{
-	int result;
-	int irq_pin  = AST_INT;
-
-	irq_set_irq_type(OMAP_GPIO_IRQ(irq_pin), IRQ_TYPE_LEVEL_LOW);
-
-	/*
-	 * for shared IRQS must provide non NULL device ptr
-	 * othervise the int won't register
-	 * */
-	result = request_irq(OMAP_GPIO_IRQ(irq_pin),
-					(irq_handler_t)cy_astoria_int_handler,
-					IRQF_SHARED, "AST_INT#", dev_p);
-
-	if (result == 0) {
-		/*
-		 * OMAP_GPIO_IRQ(irq_pin) - omap logical IRQ number
-		 *		assigned to this interrupt
-		 * OMAP_GPIO_BIT(AST_INT, GPIO_IRQENABLE1) - print status
-		 *		of AST_INT GPIO IRQ_ENABLE FLAG
-		 */
-		cy_as_hal_print_message(KERN_INFO"AST_INT omap_pin:"
-				"%d assigned IRQ #%d IRQEN1=%d\n",
-				irq_pin,
-				OMAP_GPIO_IRQ(irq_pin),
-				OMAP_GPIO_BIT(AST_INT, GPIO_IRQENABLE1)
-				);
-	} else {
-		cy_as_hal_print_message("cyasomaphal: interrupt "
-				"failed to register\n");
-		gpio_free(irq_pin);
-		cy_as_hal_print_message(KERN_WARNING
-				"ASTORIA: can't get assigned IRQ"
-				"%i for INT#\n", OMAP_GPIO_IRQ(irq_pin));
-	}
-
-	return result;
-}
-
-/*
- * initialize OMAP pads/pins to user defined functions
- */
-static void cy_as_hal_init_user_pads(user_pad_cfg_t *pad_cfg_tab)
-{
-	/*
-	 * browse through the table an dinitiaze the pins
-	 */
-	u32 in_level = 0;
-	u16 tmp16, mux_val;
-
-	while (pad_cfg_tab->name != NULL) {
-
-		if (gpio_request(pad_cfg_tab->pin_num, NULL) == 0) {
-
-			pad_cfg_tab->valid = 1;
-			mux_val = omap_cfg_reg_L(pad_cfg_tab->mux_func);
-
-			/*
-			 * always set drv level before changing out direction
-			 */
-			__gpio_set_value(pad_cfg_tab->pin_num,
-							pad_cfg_tab->drv);
-
-			/*
-			 * "0" - OUT, "1", input omap_set_gpio_direction
-			 * (pad_cfg_tab->pin_num, pad_cfg_tab->dir);
-			 */
-			if (pad_cfg_tab->dir)
-				gpio_direction_input(pad_cfg_tab->pin_num);
-			else
-				gpio_direction_output(pad_cfg_tab->pin_num,
-							pad_cfg_tab->drv);
-
-			/*  sample the pin  */
-			in_level = __gpio_get_value(pad_cfg_tab->pin_num);
-
-			cy_as_hal_print_message(KERN_INFO "configured %s to "
-					"OMAP pad_%d, DIR=%d "
-					"DOUT=%d, DIN=%d\n",
-					pad_cfg_tab->name,
-					pad_cfg_tab->pin_num,
-					pad_cfg_tab->dir,
-					pad_cfg_tab->drv,
-					in_level
-			);
-		} else {
-			/*
-			 * get the pad_mux value to check on the pin_function
-			 */
-			cy_as_hal_print_message(KERN_INFO "couldn't cfg pin %d"
-					"for signal %s, its already taken\n",
-					pad_cfg_tab->pin_num,
-					pad_cfg_tab->name);
-		}
-
-		tmp16 = *(u16 *)PADCFG_VMA
-			(omap_mux_pin_cfg[pad_cfg_tab->mux_func].offset);
-
-		cy_as_hal_print_message(KERN_INFO "GPIO_%d(PAD_CFG=%x,OE=%d"
-			"DOUT=%d, DIN=%d IRQEN=%d)\n\n",
-			pad_cfg_tab->pin_num, tmp16,
-			OMAP_GPIO_BIT(pad_cfg_tab->pin_num, GPIO_OE),
-			OMAP_GPIO_BIT(pad_cfg_tab->pin_num, GPIO_DATA_OUT),
-			OMAP_GPIO_BIT(pad_cfg_tab->pin_num, GPIO_DATA_IN),
-			OMAP_GPIO_BIT(pad_cfg_tab->pin_num, GPIO_IRQENABLE1)
-			);
-
-		/*
-		 * next pad_cfg deriptor
-		 */
-		pad_cfg_tab++;
-	}
-
-	cy_as_hal_print_message(KERN_INFO"pads configured\n");
-}
-
-
-/*
- * release gpios taken by the module
- */
-static void cy_as_hal_release_user_pads(user_pad_cfg_t *pad_cfg_tab)
-{
-	while (pad_cfg_tab->name != NULL) {
-
-		if (pad_cfg_tab->valid) {
-			gpio_free(pad_cfg_tab->pin_num);
-			pad_cfg_tab->valid = 0;
-			cy_as_hal_print_message(KERN_INFO "GPIO_%d "
-					"released from %s\n",
-					pad_cfg_tab->pin_num,
-					pad_cfg_tab->name);
-		} else {
-			cy_as_hal_print_message(KERN_INFO "no release "
-					"for %s, GPIO_%d, wasn't acquired\n",
-					pad_cfg_tab->name,
-					pad_cfg_tab->pin_num);
-		}
-		pad_cfg_tab++;
-	}
-}
-
-void cy_as_hal_config_c_s_mux(void)
-{
-	/*
-	 * FORCE the GPMC CS4 pin (it is in use by the  zoom system)
-	 */
-	omap_cfg_reg_L(T8_OMAP3430_GPMC_n_c_s4);
-}
-EXPORT_SYMBOL(cy_as_hal_config_c_s_mux);
-
-/*
- * inits all omap h/w
- */
-uint32_t cy_as_hal_processor_hw_init(void)
-{
-	int i, err;
-
-	cy_as_hal_print_message(KERN_INFO "init OMAP3430 hw...\n");
-
-	iomux_vma = (u32)ioremap_nocache(
-				(u32)CTLPADCONF_BASE_ADDR, CTLPADCONF_SIZE);
-	cy_as_hal_print_message(KERN_INFO "PADCONF_VMA=%x val=%x\n",
-				iomux_vma, IORD32(iomux_vma));
-
-	/*
-	 * remap gpio banks
-	 */
-	for (i = 0; i < 6; i++) {
-		gpio_vma_tab[i].virt_addr = (u32)ioremap_nocache(
-					gpio_vma_tab[i].phy_addr,
-					gpio_vma_tab[i].size);
-
-		cy_as_hal_print_message(KERN_INFO "%s virt_addr=%x\n",
-					gpio_vma_tab[i].name,
-					(u32)gpio_vma_tab[i].virt_addr);
-	}
-
-	/*
-	 * force OMAP_GPIO_126  to rleased state,
-	 * will be configured to drive reset
-	 */
-	gpio_free(AST_RESET);
-
-	/*
-	 *same thing with AStoria CS pin
-	 */
-	gpio_free(AST_CS);
-
-	/*
-	 * initialize all the OMAP pads connected to astoria
-	 */
-	cy_as_hal_init_user_pads(user_pad_cfg);
-
-	err = cy_as_hal_gpmc_init();
-	if (err < 0)
-		cy_as_hal_print_message(KERN_INFO"gpmc init failed:%d", err);
-
-	cy_as_hal_config_c_s_mux();
-
-	return gpmc_data_vma;
-}
-EXPORT_SYMBOL(cy_as_hal_processor_hw_init);
-
-void cy_as_hal_omap_hardware_deinit(cy_as_omap_dev_kernel *dev_p)
-{
-	/*
-	 * free omap hw resources
-	 */
-	if (gpmc_data_vma != 0)
-		iounmap((void *)gpmc_data_vma);
-
-	if (csa_phy != 0)
-		release_mem_region(csa_phy, BLKSZ_4K);
-
-	gpmc_cs_free(AST_GPMC_CS);
-
-	free_irq(OMAP_GPIO_IRQ(AST_INT), dev_p);
-
-	cy_as_hal_release_user_pads(user_pad_cfg);
-}
-
-/*
- * These are the functions that are not part of the
- * HAL layer, but are required to be called for this HAL
- */
-
-/*
- * Called On AstDevice LKM exit
- */
-int stop_o_m_a_p_kernel(const char *pgm, cy_as_hal_device_tag tag)
-{
-	cy_as_omap_dev_kernel *dev_p = (cy_as_omap_dev_kernel *)tag;
-
-	/*
-	 * TODO: Need to disable WB interrupt handlere 1st
-	 */
-	if (0 == dev_p)
-		return 1;
-
-	cy_as_hal_print_message("<1>_stopping OMAP34xx HAL layer object\n");
-	if (dev_p->m_sig != CY_AS_OMAP_KERNEL_HAL_SIG) {
-		cy_as_hal_print_message("<1>%s: %s: bad HAL tag\n",
-								pgm, __func__);
-		return 1;
-	}
-
-	/*
-	 * disable interrupt
-	 */
-	cy_as_hal_write_register((cy_as_hal_device_tag)dev_p,
-			CY_AS_MEM_P0_INT_MASK_REG, 0x0000);
-
-#if 0
-	if (dev_p->thread_flag == 0) {
-		dev_p->thread_flag = 1;
-		wait_for_completion(&dev_p->thread_complete);
-		cy_as_hal_print_message("cyasomaphal:"
-			"done cleaning thread\n");
-		cy_as_hal_destroy_sleep_channel(&dev_p->thread_sc);
-	}
-#endif
-
-	cy_as_hal_omap_hardware_deinit(dev_p);
-
-	/*
-	 * Rearrange the list
-	 */
-	if (m_omap_list_p == dev_p)
-		m_omap_list_p = dev_p->m_next_p;
-
-	cy_as_hal_free(dev_p);
-
-	cy_as_hal_print_message(KERN_INFO"OMAP_kernel_hal stopped\n");
-	return 0;
-}
-
-int omap_start_intr(cy_as_hal_device_tag tag)
-{
-	cy_as_omap_dev_kernel *dev_p = (cy_as_omap_dev_kernel *)tag;
-	int ret = 0;
-	const uint16_t mask = CY_AS_MEM_P0_INTR_REG_DRQINT |
-				CY_AS_MEM_P0_INTR_REG_MBINT;
-
-	/*
-	 * register for interrupts
-	 */
-	ret = cy_as_hal_configure_interrupts(dev_p);
-
-	/*
-	 * enable only MBox & DRQ interrupts for now
-	 */
-	cy_as_hal_write_register((cy_as_hal_device_tag)dev_p,
-				CY_AS_MEM_P0_INT_MASK_REG, mask);
-
-	return 1;
-}
-
-/*
- * Below are the functions that communicate with the WestBridge device.
- * These are system dependent and must be defined by the HAL layer
- * for a given system.
- */
-
-/*
- * GPMC NAND command+addr write phase
- */
-static inline void nand_cmd_n_addr(u8 cmdb1, u16 col_addr, u32 row_addr)
-{
-	/*
-	 * byte order on the bus <cmd> <CA0,CA1,RA0,RA1, RA2>
-	 */
-	u32 tmpa32 = ((row_addr << 16) | col_addr);
-	u8 RA2 = (u8)(row_addr >> 16);
-
-	if (!pnand_16bit) {
-		/*
-		 * GPMC PNAND 8bit BUS
-		 */
-		/*
-		 * CMD1
-		 */
-		IOWR8(ncmd_reg_vma, cmdb1);
-
-		/*
-		 *pnand bus: <CA0,CA1,RA0,RA1>
-		 */
-		IOWR32(naddr_reg_vma, tmpa32);
-
-		/*
-		 * <RA2> , always zero
-		 */
-		IOWR8(naddr_reg_vma, RA2);
-
-	} else {
-		/*
-		 * GPMC PNAND 16bit BUS , in 16 bit mode CMD
-		 * and ADDR sent on [d7..d0]
-		 */
-		uint8_t CA0, CA1, RA0, RA1;
-		CA0 = tmpa32 & 0x000000ff;
-		CA1 = (tmpa32 >> 8) &  0x000000ff;
-		RA0 = (tmpa32 >> 16) & 0x000000ff;
-		RA1 = (tmpa32 >> 24) & 0x000000ff;
-
-		/*
-		 * can't use 32 bit writes here omap will not serialize
-		 * them to lower half in16 bit mode
-		 */
-
-		/*
-		 *pnand bus: <CMD1, CA0,CA1,RA0,RA1, RA2 (always zero)>
-		 */
-		IOWR8(ncmd_reg_vma, cmdb1);
-		IOWR8(naddr_reg_vma, CA0);
-		IOWR8(naddr_reg_vma, CA1);
-		IOWR8(naddr_reg_vma, RA0);
-		IOWR8(naddr_reg_vma, RA1);
-		IOWR8(naddr_reg_vma, RA2);
-	}
-}
-
-/*
- * spin until r/b goes high
- */
-inline int wait_rn_b_high(void)
-{
-	u32 w_spins = 0;
-
-	/*
-	 * TODO: note R/b may go low here, need to spin until high
-	 * while (omap_get_gpio_datain(AST_RnB) == 0) {
-	 * w_spins++;
-	 * }
-	 * if (OMAP_GPIO_BIT(AST_RnB, GPIO_DATA_IN)  == 0) {
-	 *
-	 * while (OMAP_GPIO_BIT(AST_RnB, GPIO_DATA_IN)  == 0) {
-	 * w_spins++;
-	 * }
-	 * printk("<1>RnB=0!:%d\n",w_spins);
-	 * }
-	 */
-	return w_spins;
-}
-
-#ifdef ENABLE_GPMC_PF_ENGINE
-/* #define PFE_READ_DEBUG
- * PNAND  block read with OMAP PFE enabled
- * status: Not tested, NW, broken , etc
- */
-static void p_nand_lbd_read(u16 col_addr, u32 row_addr, u16 count, void *buff)
-{
-	uint16_t w32cnt;
-	uint32_t *ptr32;
-	uint8_t *ptr8;
-	uint8_t  bytes_in_fifo;
-
-	/* debug vars*/
-#ifdef PFE_READ_DEBUG
-	uint32_t loop_limit;
-	uint16_t bytes_read = 0;
-#endif
-
-	/*
-	 * configure the prefetch engine
-	 */
-	uint32_t tmp32;
-	uint32_t pfe_status;
-
-	/*
-	 * DISABLE GPMC CS4 operation 1st, this is
-	 * in case engine is be already disabled
-	 */
-	IOWR32(GPMC_VMA(GPMC_PREFETCH_CONTROL), 0x0);
-	IOWR32(GPMC_VMA(GPMC_PREFETCH_CONFIG1), GPMC_PREFETCH_CONFIG1_VAL);
-	IOWR32(GPMC_VMA(GPMC_PREFETCH_CONFIG2), count);
-
-#ifdef PFE_READ_DEBUG
-	tmp32 = IORD32(GPMC_VMA(GPMC_PREFETCH_CONFIG1));
-	if (tmp32 != GPMC_PREFETCH_CONFIG1_VAL) {
-		printk(KERN_INFO "<1> prefetch is CONFIG1 read val:%8.8x, != VAL written:%8.8x\n",
-				tmp32, GPMC_PREFETCH_CONFIG1_VAL);
-		tmp32 = IORD32(GPMC_VMA(GPMC_PREFETCH_STATUS));
-		printk(KERN_INFO "<1> GPMC_PREFETCH_STATUS : %8.8x\n", tmp32);
-	}
-
-	/*
-	 *sanity check 2
-	 */
-	tmp32 = IORD32(GPMC_VMA(GPMC_PREFETCH_CONFIG2));
-	if (tmp32 != (count))
-		printk(KERN_INFO "<1> GPMC_PREFETCH_CONFIG2 read val:%d, "
-				"!= VAL written:%d\n", tmp32, count);
-#endif
-
-	/*
-	 * ISSUE PNAND CMD+ADDR, note gpmc puts 32b words
-	 * on the bus least sig. byte 1st
-	 */
-	nand_cmd_n_addr(RDPAGE_B1, col_addr, row_addr);
-
-	IOWR8(ncmd_reg_vma, RDPAGE_B2);
-
-	/*
-	 * start the prefetch engine
-	 */
-	IOWR32(GPMC_VMA(GPMC_PREFETCH_CONTROL), 0x1);
-
-	ptr32 = buff;
-
-	while (1) {
-		/*
-		 * GPMC PFE service loop
-		 */
-		do {
-			/*
-			 * spin until PFE fetched some
-			 * PNAND bus words in the FIFO
-			 */
-			pfe_status = IORD32(GPMC_VMA(GPMC_PREFETCH_STATUS));
-			bytes_in_fifo = (pfe_status >> 24) & 0x7f;
-		} while (bytes_in_fifo == 0);
-
-		/* whole 32 bit words in fifo */
-		w32cnt = bytes_in_fifo >> 2;
-
-#if 0
-	   /*
-		*NOTE: FIFO_PTR indicates number of NAND bus words bytes
-		*   already received in the FIFO and available to be read
-		*   by DMA or MPU whether COUNTVAL indicates number of BUS
-		*   words yet to be read from PNAND bus words
-		*/
-		printk(KERN_ERR "<1> got PF_STATUS:%8.8x FIFO_PTR:%d, COUNTVAL:%d, w32cnt:%d\n",
-					pfe_status, bytes_in_fifo,
-					(pfe_status & 0x3fff), w32cnt);
-#endif
-
-		while (w32cnt--)
-			*ptr32++ = IORD32(gpmc_data_vma);
-
-		if ((pfe_status & 0x3fff) == 0) {
-			/*
-			 * PFE acc angine done, there still may be data leftover
-			 * in the FIFO re-read FIFO BYTE counter (check for
-			 * leftovers from 32 bit read accesses above)
-			 */
-			bytes_in_fifo = (IORD32(
-				GPMC_VMA(GPMC_PREFETCH_STATUS)) >> 24) & 0x7f;
-
-			/*
-			 * NOTE we may still have one word left in the fifo
-			 * read it out
-			 */
-			ptr8 = ptr32;
-			switch (bytes_in_fifo) {
-
-			case 0:
-				/*
-				 * nothing to do we already read the
-				 * FIFO out with 32 bit accesses
-				 */
-				break;
-			case 1:
-				/*
-				* this only possible
-				* for 8 bit pNAND only
-				*/
-				*ptr8 = IORD8(gpmc_data_vma);
-				break;
-
-			case 2:
-				/*
-				 * this one can occur in either modes
-				 */
-				*(uint16_t *)ptr8 = IORD16(gpmc_data_vma);
-				break;
-
-			case 3:
-				/*
-				 * this only possible for 8 bit pNAND only
-				 */
-				*(uint16_t *)ptr8 = IORD16(gpmc_data_vma);
-				ptr8 += 2;
-				*ptr8 = IORD8(gpmc_data_vma);
-				break;
-
-			case 4:
-				/*
-				 * shouldn't happen, but has been seen
-				 * in 8 bit mode
-				 */
-				*ptr32 = IORD32(gpmc_data_vma);
-				break;
-
-			default:
-				printk(KERN_ERR"<1>_error: PFE FIFO bytes leftover is not read:%d\n",
-								bytes_in_fifo);
-				break;
-			}
-			/*
-			 * read is completed, get out of the while(1) loop
-			 */
-			break;
-		}
-	}
-}
-#endif
-
-#ifdef PFE_LBD_READ_V2
-/*
- * PFE engine assisted reads with the 64 byte blocks
- */
-static void p_nand_lbd_read(u16 col_addr, u32 row_addr, u16 count, void *buff)
-{
-	uint8_t rd_cnt;
-	uint32_t *ptr32;
-	uint8_t  *ptr8;
-	uint16_t reminder;
-	uint32_t pfe_status;
-
-	/*
-	 * ISSUE PNAND CMD+ADDR
-	 * note gpmc puts 32b words on the bus least sig. byte 1st
-	 */
-	nand_cmd_n_addr(RDPAGE_B1, col_addr, row_addr);
-	IOWR8(ncmd_reg_vma, RDPAGE_B2);
-
-	/*
-	 * setup PFE block
-	 * count - OMAP number of bytes to access on pnand bus
-	 */
-
-	IOWR32(GPMC_VMA(GPMC_PREFETCH_CONFIG1), GPMC_PREFETCH_CONFIG1_VAL);
-	IOWR32(GPMC_VMA(GPMC_PREFETCH_CONFIG2), count);
-	IOWR32(GPMC_VMA(GPMC_PREFETCH_CONTROL), 0x1);
-
-	ptr32 = buff;
-
-	do {
-		pfe_status = IORD32(GPMC_VMA(GPMC_PREFETCH_STATUS));
-		rd_cnt =  pfe_status >> (24+2);
-
-		while (rd_cnt--)
-			*ptr32++ = IORD32(gpmc_data_vma);
-
-	} while (pfe_status & 0x3fff);
-
-	/*
-	 * read out the leftover
-	 */
-	ptr8 = ptr32;
-	rd_cnt = (IORD32(GPMC_VMA(GPMC_PREFETCH_STATUS))  >> 24) & 0x7f;
-
-	while (rd_cnt--)
-		*ptr8++ = IORD8(gpmc_data_vma);
-}
-#endif
-
-#ifdef PNAND_LBD_READ_NO_PFE
-/*
- * Endpoint buffer read  w/o OMAP GPMC Prefetch Engine
- * the original working code, works at max speed for 8 bit xfers
- * for 16 bit the bus diagram has gaps
- */
-static void p_nand_lbd_read(u16 col_addr, u32 row_addr, u16 count, void *buff)
-{
-	uint16_t w32cnt;
-	uint32_t *ptr32;
-	uint16_t *ptr16;
-	uint16_t remainder;
-
-	DBGPRN("<1> %s(): NO_PFE\n", __func__);
-
-	ptr32 = buff;
-	/* number of whole 32 bit words in the transfer */
-	w32cnt = count >> 2;
-
-	/* remainder, in bytes(0..3) */
-	remainder =  count & 03;
-
-	/*
-	 * note gpmc puts 32b words on the bus least sig. byte 1st
-	 */
-	nand_cmd_n_addr(RDPAGE_B1, col_addr, row_addr);
-	IOWR8(ncmd_reg_vma, RDPAGE_B2);
-
-	/*
-	 * read data by 32 bit chunks
-	 */
-	while (w32cnt--)
-		*ptr32++ = IORD32(ndata_reg_vma);
-
-	/*
-	 * now do the remainder(it can be 0, 1, 2 or 3)
-	 * same code for both 8 & 16 bit bus
-	 * do 1 or 2 MORE words
-	 */
-	ptr16 = (uint16_t *)ptr32;
-
-	switch (remainder) {
-	case 1:
-		/*  read one 16 bit word
-		 * IN 8 BIT WE NEED TO READ even number of bytes
-		 */
-	case 2:
-		*ptr16 = IORD16(ndata_reg_vma);
-		break;
-	case 3:
-		/*
-		 * for 3 bytes read 2 16 bit words
-		 */
-		*ptr16++ = IORD16(ndata_reg_vma);
-		*ptr16   = IORD16(ndata_reg_vma);
-		break;
-	default:
-		/*
-		 * remainder is 0
-		 */
-		break;
-	}
-}
-#endif
-
-/*
- * uses LBD mode to write N bytes into astoria
- * Status: Working, however there are 150ns idle
- * timeafter every 2 (16 bit or 4(8 bit) bus cycles
- */
-static void p_nand_lbd_write(u16 col_addr, u32 row_addr, u16 count, void *buff)
-{
-	uint16_t w32cnt;
-	uint16_t remainder;
-	uint8_t  *ptr8;
-	uint16_t *ptr16;
-	uint32_t *ptr32;
-
-	remainder =  count & 03;
-	w32cnt = count >> 2;
-	ptr32 = buff;
-	ptr8 = buff;
-
-	/*
-	 * send: CMDB1, CA0,CA1,RA0,RA1,RA2
-	 */
-	nand_cmd_n_addr(PGMPAGE_B1, col_addr, row_addr);
-
-	/*
-	 * blast the data out in 32bit chunks
-	 */
-	while (w32cnt--)
-		IOWR32(ndata_reg_vma, *ptr32++);
-
-	/*
-	 * do the reminder if there is one
-	 * same handling for both 8 & 16 bit pnand: mode
-	 */
-	ptr16 = (uint16_t *)ptr32; /* do 1 or 2  words */
-
-	switch (remainder) {
-	case 1:
-		/*
-		 * read one 16 bit word
-		 */
-	case 2:
-		IOWR16(ndata_reg_vma, *ptr16);
-		break;
-
-	case 3:
-		/*
-		 * for 3 bytes read 2 16 bit words
-		 */
-		IOWR16(ndata_reg_vma, *ptr16++);
-		IOWR16(ndata_reg_vma, *ptr16);
-		break;
-	default:
-		/*
-		 * reminder is 0
-		 */
-		break;
-	}
-	/*
-	 * finally issue a PGM cmd
-	 */
-	IOWR8(ncmd_reg_vma, PGMPAGE_B2);
-}
-
-/*
- * write Astoria register
- */
-static inline void ast_p_nand_casdi_write(u8 reg_addr8, u16 data)
-{
-	unsigned long flags;
-	u16 addr16;
-	/*
-	 * throw an error if called from multiple threads
-	 */
-	static atomic_t rdreg_usage_cnt = { 0 };
-
-	/*
-	 * disable interrupts
-	 */
-	local_irq_save(flags);
-
-	if (atomic_read(&rdreg_usage_cnt) != 0) {
-		cy_as_hal_print_message(KERN_ERR "cy_as_omap_hal:"
-				"* cy_as_hal_write_register usage:%d\n",
-				atomic_read(&rdreg_usage_cnt));
-	}
-
-	atomic_inc(&rdreg_usage_cnt);
-
-	/*
-	 * 2 flavors of GPMC -> PNAND  access
-	 */
-	if (pnand_16bit) {
-		/*
-		 *  16 BIT gpmc NAND mode
-		 */
-
-		/*
-		 * CMD1, CA1, CA2,
-		 */
-		IOWR8(ncmd_reg_vma, 0x85);
-		IOWR8(naddr_reg_vma, reg_addr8);
-		IOWR8(naddr_reg_vma, 0x0c);
-
-		/*
-		 * this should be sent on the 16 bit bus
-		 */
-		IOWR16(ndata_reg_vma, data);
-	} else {
-		/*
-		 * 8 bit nand mode GPMC will automatically
-		 * seriallize 16bit or 32 bit writes into
-		 * 8 bit onesto the lower 8 bit in LE order
-		 */
-		addr16 = 0x0c00 | reg_addr8;
-
-		/*
-		 * CMD1, CA1, CA2,
-		 */
-		IOWR8(ncmd_reg_vma, 0x85);
-		IOWR16(naddr_reg_vma, addr16);
-		IOWR16(ndata_reg_vma, data);
-	}
-
-	/*
-	 * re-enable interrupts
-	 */
-	atomic_dec(&rdreg_usage_cnt);
-	local_irq_restore(flags);
-}
-
-
-/*
- * read astoria register via pNAND interface
- */
-static inline u16 ast_p_nand_casdo_read(u8 reg_addr8)
-{
-	u16 data;
-	u16 addr16;
-	unsigned long flags;
-	/*
-	 * throw an error if called from multiple threads
-	 */
-	static atomic_t wrreg_usage_cnt = { 0 };
-
-	/*
-	 * disable interrupts
-	 */
-	local_irq_save(flags);
-
-	if (atomic_read(&wrreg_usage_cnt) != 0) {
-		/*
-		 * if it gets here ( from other threads), this function needs
-		 * need spin_lock_irq save() protection
-		 */
-		cy_as_hal_print_message(KERN_ERR"cy_as_omap_hal: "
-				"cy_as_hal_write_register usage:%d\n",
-				atomic_read(&wrreg_usage_cnt));
-	}
-	atomic_inc(&wrreg_usage_cnt);
-
-	/*
-	 * 2 flavors of GPMC -> PNAND  access
-	 */
-	if (pnand_16bit) {
-		/*
-		 *  16 BIT gpmc NAND mode
-		 *  CMD1, CA1, CA2,
-		 */
-
-		IOWR8(ncmd_reg_vma, 0x05);
-		IOWR8(naddr_reg_vma, reg_addr8);
-		IOWR8(naddr_reg_vma, 0x0c);
-		IOWR8(ncmd_reg_vma, 0x00E0);
-
-		udelay(1);
-
-		/*
-		 * much faster through the gPMC Register space
-		 */
-		data = IORD16(ndata_reg_vma);
-	} else {
-		/*
-		 *  8 BIT gpmc NAND mode
-		 *  CMD1, CA1, CA2, CMD2
-		 */
-		addr16 = 0x0c00 | reg_addr8;
-		IOWR8(ncmd_reg_vma, 0x05);
-		IOWR16(naddr_reg_vma, addr16);
-		IOWR8(ncmd_reg_vma, 0xE0);
-		udelay(1);
-		data = IORD16(ndata_reg_vma);
-	}
-
-	/*
-	 * re-enable interrupts
-	 */
-	atomic_dec(&wrreg_usage_cnt);
-	local_irq_restore(flags);
-
-	return data;
-}
-
-
-/*
- * This function must be defined to write a register within the WestBridge
- * device.  The addr value is the address of the register to write with
- * respect to the base address of the WestBridge device.
- */
-void cy_as_hal_write_register(
-					cy_as_hal_device_tag tag,
-					uint16_t addr, uint16_t data)
-{
-	ast_p_nand_casdi_write((u8)addr, data);
-}
-
-/*
- * This function must be defined to read a register from the WestBridge
- * device.  The addr value is the address of the register to read with
- * respect to the base address of the WestBridge device.
- */
-uint16_t cy_as_hal_read_register(cy_as_hal_device_tag tag, uint16_t addr)
-{
-	uint16_t data  = 0;
-
-	/*
-	 * READ ASTORIA REGISTER USING CASDO
-	 */
-	data = ast_p_nand_casdo_read((u8)addr);
-
-	return data;
-}
-
-/*
- * preps Ep pointers & data counters for next packet
- * (fragment of the request) xfer returns true if
- * there is a next transfer, and false if all bytes in
- * current request have been xfered
- */
-static inline bool prep_for_next_xfer(cy_as_hal_device_tag tag, uint8_t ep)
-{
-
-	if (!end_points[ep].sg_list_enabled) {
-		/*
-		 * no further transfers for non storage EPs
-		 * (like EP2 during firmware download, done
-		 * in 64 byte chunks)
-		 */
-		if (end_points[ep].req_xfer_cnt >= end_points[ep].req_length) {
-			DBGPRN("<1> %s():RQ sz:%d non-_sg EP:%d completed\n",
-				__func__, end_points[ep].req_length, ep);
-
-			/*
-			 * no more transfers, we are done with the request
-			 */
-			return false;
-		}
-
-		/*
-		 * calculate size of the next DMA xfer, corner
-		 * case for non-storage EPs where transfer size
-		 * is not egual N * HAL_DMA_PKT_SZ xfers
-		 */
-		if ((end_points[ep].req_length - end_points[ep].req_xfer_cnt)
-		>= HAL_DMA_PKT_SZ) {
-				end_points[ep].dma_xfer_sz = HAL_DMA_PKT_SZ;
-		} else {
-			/*
-			 * that would be the last chunk less
-			 * than P-port max size
-			 */
-			end_points[ep].dma_xfer_sz = end_points[ep].req_length -
-					end_points[ep].req_xfer_cnt;
-		}
-
-		return true;
-	}
-
-	/*
-	 * for SG_list assisted dma xfers
-	 * are we done with current SG ?
-	 */
-	if (end_points[ep].seg_xfer_cnt ==  end_points[ep].sg_p->length) {
-		/*
-		 *  was it the Last SG segment on the list ?
-		 */
-		if (sg_is_last(end_points[ep].sg_p)) {
-			DBGPRN("<1> %s: EP:%d completed,"
-					"%d bytes xfered\n",
-					__func__,
-					ep,
-					end_points[ep].req_xfer_cnt
-			);
-
-			return false;
-		} else {
-			/*
-			 * There are more SG segments in current
-			 * request's sg list setup new segment
-			 */
-
-			end_points[ep].seg_xfer_cnt = 0;
-			end_points[ep].sg_p = sg_next(end_points[ep].sg_p);
-			/* set data pointer for next DMA sg transfer*/
-			end_points[ep].data_p = sg_virt(end_points[ep].sg_p);
-			DBGPRN("<1> %s new SG:_va:%p\n\n",
-					__func__, end_points[ep].data_p);
-		}
-
-	}
-
-	/*
-	 * for sg list xfers it will always be 512 or 1024
-	 */
-	end_points[ep].dma_xfer_sz = HAL_DMA_PKT_SZ;
-
-	/*
-	 * next transfer is required
-	 */
-
-	return true;
-}
-
-/*
- * Astoria DMA read request, APP_CPU reads from WB ep buffer
- */
-static void cy_service_e_p_dma_read_request(
-			cy_as_omap_dev_kernel *dev_p, uint8_t ep)
-{
-	cy_as_hal_device_tag tag = (cy_as_hal_device_tag)dev_p;
-	uint16_t  v, size;
-	void	*dptr;
-	uint16_t col_addr = 0x0000;
-	uint32_t row_addr = CYAS_DEV_CALC_EP_ADDR(ep);
-	uint16_t ep_dma_reg = CY_AS_MEM_P0_EP2_DMA_REG + ep - 2;
-
-	/*
-	 * get the XFER size frtom WB eP DMA REGISTER
-	 */
-	v = cy_as_hal_read_register(tag, ep_dma_reg);
-
-	/*
-	 * amount of data in EP buff in  bytes
-	 */
-	size =  v & CY_AS_MEM_P0_E_pn_DMA_REG_COUNT_MASK;
-
-	/*
-	 * memory pointer for this DMA packet xfer (sub_segment)
-	 */
-	dptr = end_points[ep].data_p;
-
-	DBGPRN("<1>HAL:_svc_dma_read on EP_%d sz:%d, intr_seq:%d, dptr:%p\n",
-		ep,
-		size,
-		intr_sequence_num,
-		dptr
-	);
-
-	cy_as_hal_assert(size != 0);
-
-	if (size) {
-		/*
-		 * the actual WB-->OMAP memory "soft" DMA xfer
-		 */
-		p_nand_lbd_read(col_addr, row_addr, size, dptr);
-	}
-
-	/*
-	 * clear DMAVALID bit indicating that the data has been read
-	 */
-	cy_as_hal_write_register(tag, ep_dma_reg, 0);
-
-	end_points[ep].seg_xfer_cnt += size;
-	end_points[ep].req_xfer_cnt += size;
-
-	/*
-	 *  pre-advance data pointer (if it's outside sg
-	 * list it will be reset anyway
-	 */
-	end_points[ep].data_p += size;
-
-	if (prep_for_next_xfer(tag, ep)) {
-		/*
-		 * we have more data to read in this request,
-		 * setup next dma packet due tell WB how much
-		 * data we are going to xfer next
-		 */
-		v = end_points[ep].dma_xfer_sz/*HAL_DMA_PKT_SZ*/ |
-				CY_AS_MEM_P0_E_pn_DMA_REG_DMAVAL;
-		cy_as_hal_write_register(tag, ep_dma_reg, v);
-	} else {
-		end_points[ep].pending	  = cy_false;
-		end_points[ep].type		 = cy_as_hal_none;
-		end_points[ep].buffer_valid = cy_false;
-
-		/*
-		 * notify the API that we are done with rq on this EP
-		 */
-		if (callback) {
-			DBGPRN("<1>trigg rd_dma completion cb: xfer_sz:%d\n",
-				end_points[ep].req_xfer_cnt);
-				callback(tag, ep,
-					end_points[ep].req_xfer_cnt,
-					CY_AS_ERROR_SUCCESS);
-		}
-	}
-}
-
-/*
- * omap_cpu needs to transfer data to ASTORIA EP buffer
- */
-static void cy_service_e_p_dma_write_request(
-			cy_as_omap_dev_kernel *dev_p, uint8_t ep)
-{
-	uint16_t  addr;
-	uint16_t v  = 0;
-	uint32_t  size;
-	uint16_t col_addr = 0x0000;
-	uint32_t row_addr = CYAS_DEV_CALC_EP_ADDR(ep);
-	void	*dptr;
-
-	cy_as_hal_device_tag tag = (cy_as_hal_device_tag)dev_p;
-	/*
-	 * note: size here its the size of the dma transfer could be
-	 * anything > 0 && < P_PORT packet size
-	 */
-	size = end_points[ep].dma_xfer_sz;
-	dptr = end_points[ep].data_p;
-
-	/*
-	 * perform the soft DMA transfer, soft in this case
-	 */
-	if (size)
-		p_nand_lbd_write(col_addr, row_addr, size, dptr);
-
-	end_points[ep].seg_xfer_cnt += size;
-	end_points[ep].req_xfer_cnt += size;
-	/*
-	 * pre-advance data pointer
-	 * (if it's outside sg list it will be reset anyway)
-	 */
-	end_points[ep].data_p += size;
-
-	/*
-	 * now clear DMAVAL bit to indicate we are done
-	 * transferring data and that the data can now be
-	 * sent via USB to the USB host, sent to storage,
-	 * or used internally.
-	 */
-
-	addr = CY_AS_MEM_P0_EP2_DMA_REG + ep - 2;
-	cy_as_hal_write_register(tag, addr, size);
-
-	/*
-	 * finally, tell the USB subsystem that the
-	 * data is gone and we can accept the
-	 * next request if one exists.
-	 */
-	if (prep_for_next_xfer(tag, ep)) {
-		/*
-		 * There is more data to go. Re-init the WestBridge DMA side
-		 */
-		v = end_points[ep].dma_xfer_sz |
-			CY_AS_MEM_P0_E_pn_DMA_REG_DMAVAL;
-		cy_as_hal_write_register(tag, addr, v);
-	} else {
-
-	   end_points[ep].pending	  = cy_false;
-	   end_points[ep].type		 = cy_as_hal_none;
-	   end_points[ep].buffer_valid = cy_false;
-
-		/*
-		 * notify the API that we are done with rq on this EP
-		 */
-		if (callback) {
-			/*
-			 * this callback will wake up the process that might be
-			 * sleeping on the EP which data is being transferred
-			 */
-			callback(tag, ep,
-					end_points[ep].req_xfer_cnt,
-					CY_AS_ERROR_SUCCESS);
-		}
-	}
-}
-
-/*
- * HANDLE DRQINT from Astoria (called in AS_Intr context
- */
-static void cy_handle_d_r_q_interrupt(cy_as_omap_dev_kernel *dev_p)
-{
-	uint16_t v;
-	static uint8_t service_ep = 2;
-
-	/*
-	 * We've got DRQ INT, read DRQ STATUS Register */
-	v = cy_as_hal_read_register((cy_as_hal_device_tag)dev_p,
-			CY_AS_MEM_P0_DRQ);
-
-	if (v == 0) {
-#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("stray DRQ interrupt detected\n");
-#endif
-		return;
-	}
-
-	/*
-	 * Now, pick a given DMA request to handle, for now, we just
-	 * go round robin.  Each bit position in the service_mask
-	 * represents an endpoint from EP2 to EP15.  We rotate through
-	 * each of the endpoints to find one that needs to be serviced.
-	 */
-	while ((v & (1 << service_ep)) == 0) {
-
-		if (service_ep == 15)
-			service_ep = 2;
-		else
-			service_ep++;
-	}
-
-	if (end_points[service_ep].type == cy_as_hal_write) {
-		/*
-		 * handle DMA WRITE REQUEST: app_cpu will
-		 * write data into astoria EP buffer
-		 */
-		cy_service_e_p_dma_write_request(dev_p, service_ep);
-	} else if (end_points[service_ep].type == cy_as_hal_read) {
-		/*
-		 * handle DMA READ REQUEST: cpu will
-		 * read EP buffer from Astoria
-		 */
-		cy_service_e_p_dma_read_request(dev_p, service_ep);
-	}
-#ifndef WESTBRIDGE_NDEBUG
-	else
-		cy_as_hal_print_message("cyashalomap:interrupt,"
-					" w/o pending DMA job,"
-					"-check DRQ_MASK logic\n");
-#endif
-
-	/*
-	 * Now bump the EP ahead, so other endpoints get
-	 * a shot before the one we just serviced
-	 */
-	if (end_points[service_ep].type == cy_as_hal_none) {
-		if (service_ep == 15)
-			service_ep = 2;
-		else
-			service_ep++;
-	}
-
-}
-
-void cy_as_hal_dma_cancel_request(cy_as_hal_device_tag tag, uint8_t ep)
-{
-	DBGPRN("cy_as_hal_dma_cancel_request on ep:%d", ep);
-	if (end_points[ep].pending)
-		cy_as_hal_write_register(tag,
-				CY_AS_MEM_P0_EP2_DMA_REG + ep - 2, 0);
-
-	end_points[ep].buffer_valid = cy_false;
-	end_points[ep].type = cy_as_hal_none;
-}
-
-/*
- * enables/disables SG list assisted DMA xfers for the given EP
- * sg_list assisted XFERS can use physical addresses of mem pages in case if the
- * xfer is performed by a h/w DMA controller rather then the CPU on P port
- */
-void cy_as_hal_set_ep_dma_mode(uint8_t ep, bool sg_xfer_enabled)
-{
-	end_points[ep].sg_list_enabled = sg_xfer_enabled;
-	DBGPRN("<1> EP:%d sg_list assisted DMA mode set to = %d\n",
-			ep, end_points[ep].sg_list_enabled);
-}
-EXPORT_SYMBOL(cy_as_hal_set_ep_dma_mode);
-
-/*
- * This function must be defined to transfer a block of data to
- * the WestBridge device.  This function can use the burst write
- * (DMA) capabilities of WestBridge to do this, or it can just copy
- * the data using writes.
- */
-void cy_as_hal_dma_setup_write(cy_as_hal_device_tag tag,
-						uint8_t ep, void *buf,
-						uint32_t size, uint16_t maxsize)
-{
-	uint32_t addr = 0;
-	uint16_t v  = 0;
-
-	/*
-	 * Note: "size" is the actual request size
-	 * "maxsize" - is the P port fragment size
-	 * No EP0 or EP1 traffic should get here
-	 */
-	cy_as_hal_assert(ep != 0 && ep != 1);
-
-	/*
-	 * If this asserts, we have an ordering problem.  Another DMA request
-	 * is coming down before the previous one has completed.
-	 */
-	cy_as_hal_assert(end_points[ep].buffer_valid == cy_false);
-	end_points[ep].buffer_valid = cy_true;
-	end_points[ep].type = cy_as_hal_write;
-	end_points[ep].pending = cy_true;
-
-	/*
-	 * total length of the request
-	 */
-	end_points[ep].req_length = size;
-
-	if (size >= maxsize) {
-		/*
-		 * set xfer size for very 1st DMA xfer operation
-		 * port max packet size ( typically 512 or 1024)
-		 */
-		end_points[ep].dma_xfer_sz = maxsize;
-	} else {
-		/*
-		 * smaller xfers for non-storage EPs
-		 */
-		end_points[ep].dma_xfer_sz = size;
-	}
-
-	/*
-	 * check the EP transfer mode uses sg_list rather then a memory buffer
-	 * block devices pass it to the HAL, so the hAL could get to the real
-	 * physical address for each segment and set up a DMA controller
-	 * hardware ( if there is one)
-	 */
-	if (end_points[ep].sg_list_enabled) {
-		/*
-		 * buf -  pointer to the SG list
-		 * data_p - data pointer to the 1st DMA segment
-		 * seg_xfer_cnt - keeps track of N of bytes sent in current
-		 *		sg_list segment
-		 * req_xfer_cnt - keeps track of the total N of bytes
-		 *		transferred for the request
-		 */
-		end_points[ep].sg_p = buf;
-		end_points[ep].data_p = sg_virt(end_points[ep].sg_p);
-		end_points[ep].seg_xfer_cnt = 0;
-		end_points[ep].req_xfer_cnt = 0;
-
-#ifdef DBGPRN_DMA_SETUP_WR
-		DBGPRN("cyasomaphal:%s: EP:%d, buf:%p, buf_va:%p,"
-				"req_sz:%d, maxsz:%d\n",
-				__func__,
-				ep,
-				buf,
-				end_points[ep].data_p,
-				size,
-				maxsize);
-#endif
-
-	} else {
-		/*
-		 * setup XFER for non sg_list assisted EPs
-		 */
-
-		#ifdef DBGPRN_DMA_SETUP_WR
-			DBGPRN("<1>%s non storage or sz < 512:"
-					"EP:%d, sz:%d\n", __func__, ep, size);
-		#endif
-
-		end_points[ep].sg_p = NULL;
-
-		/*
-		 * must be a VMA of a membuf in kernel space
-		 */
-		end_points[ep].data_p = buf;
-
-		/*
-		 * will keep track No of bytes xferred for the request
-		 */
-		end_points[ep].req_xfer_cnt = 0;
-	}
-
-	/*
-	 * Tell WB we are ready to send data on the given endpoint
-	 */
-	v = (end_points[ep].dma_xfer_sz & CY_AS_MEM_P0_E_pn_DMA_REG_COUNT_MASK)
-			| CY_AS_MEM_P0_E_pn_DMA_REG_DMAVAL;
-
-	addr = CY_AS_MEM_P0_EP2_DMA_REG + ep - 2;
-
-	cy_as_hal_write_register(tag, addr, v);
-}
-
-/*
- * This function must be defined to transfer a block of data from
- * the WestBridge device.  This function can use the burst read
- * (DMA) capabilities of WestBridge to do this, or it can just
- * copy the data using reads.
- */
-void cy_as_hal_dma_setup_read(cy_as_hal_device_tag tag,
-					uint8_t ep, void *buf,
-					uint32_t size, uint16_t maxsize)
-{
-	uint32_t addr;
-	uint16_t v;
-
-	/*
-	 * Note: "size" is the actual request size
-	 * "maxsize" - is the P port fragment size
-	 * No EP0 or EP1 traffic should get here
-	 */
-	cy_as_hal_assert(ep != 0 && ep != 1);
-
-	/*
-	 * If this asserts, we have an ordering problem.
-	 * Another DMA request is coming down before the
-	 * previous one has completed. we should not get
-	 * new requests if current is still in process
-	 */
-
-	cy_as_hal_assert(end_points[ep].buffer_valid == cy_false);
-
-	end_points[ep].buffer_valid = cy_true;
-	end_points[ep].type = cy_as_hal_read;
-	end_points[ep].pending = cy_true;
-	end_points[ep].req_xfer_cnt = 0;
-	end_points[ep].req_length = size;
-
-	if (size >= maxsize) {
-		/*
-		 * set xfer size for very 1st DMA xfer operation
-		 * port max packet size ( typically 512 or 1024)
-		 */
-		end_points[ep].dma_xfer_sz = maxsize;
-	} else {
-		/*
-		 * so that we could handle small xfers on in case
-		 * of non-storage EPs
-		 */
-		end_points[ep].dma_xfer_sz = size;
-	}
-
-	addr = CY_AS_MEM_P0_EP2_DMA_REG + ep - 2;
-
-	if (end_points[ep].sg_list_enabled) {
-		/*
-		 * Handle sg-list assisted EPs
-		 * seg_xfer_cnt - keeps track of N of sent packets
-		 * buf - pointer to the SG list
-		 * data_p - data pointer for the 1st DMA segment
-		 */
-		end_points[ep].seg_xfer_cnt = 0;
-		end_points[ep].sg_p = buf;
-		end_points[ep].data_p = sg_virt(end_points[ep].sg_p);
-
-		#ifdef DBGPRN_DMA_SETUP_RD
-		DBGPRN("cyasomaphal:DMA_setup_read sg_list EP:%d, "
-			   "buf:%p, buf_va:%p, req_sz:%d, maxsz:%d\n",
-				ep,
-				buf,
-				end_points[ep].data_p,
-				size,
-				maxsize);
-		#endif
-		v = (end_points[ep].dma_xfer_sz &
-				CY_AS_MEM_P0_E_pn_DMA_REG_COUNT_MASK) |
-				CY_AS_MEM_P0_E_pn_DMA_REG_DMAVAL;
-		cy_as_hal_write_register(tag, addr, v);
-	} else {
-		/*
-		 * Non sg list EP passed  void *buf rather then scatterlist *sg
-		 */
-		#ifdef DBGPRN_DMA_SETUP_RD
-			DBGPRN("%s:non-sg_list EP:%d,"
-					"RQ_sz:%d, maxsz:%d\n",
-					__func__, ep, size,  maxsize);
-		#endif
-
-		end_points[ep].sg_p = NULL;
-
-		/*
-		 * must be a VMA of a membuf in kernel space
-		 */
-		end_points[ep].data_p = buf;
-
-		/*
-		 * Program the EP DMA register for Storage endpoints only.
-		 */
-		if (is_storage_e_p(ep)) {
-			v = (end_points[ep].dma_xfer_sz &
-					CY_AS_MEM_P0_E_pn_DMA_REG_COUNT_MASK) |
-					CY_AS_MEM_P0_E_pn_DMA_REG_DMAVAL;
-			cy_as_hal_write_register(tag, addr, v);
-		}
-	}
-}
-
-/*
- * This function must be defined to allow the WB API to
- * register a callback function that is called when a
- * DMA transfer is complete.
- */
-void cy_as_hal_dma_register_callback(cy_as_hal_device_tag tag,
-					cy_as_hal_dma_complete_callback cb)
-{
-	DBGPRN("<1>\n%s: WB API has registered a dma_complete callback:%x\n",
-			__func__, (uint32_t)cb);
-	callback = cb;
-}
-
-/*
- * This function must be defined to return the maximum size of
- * DMA request that can be handled on the given endpoint.  The
- * return value should be the maximum size in bytes that the DMA
- * module can handle.
- */
-uint32_t cy_as_hal_dma_max_request_size(cy_as_hal_device_tag tag,
-					cy_as_end_point_number_t ep)
-{
-	/*
-	 * Storage reads and writes are always done in 512 byte blocks.
-	 * So, we do the count handling within the HAL, and save on
-	 * some of the data transfer delay.
-	 */
-	if ((ep == CYASSTORAGE_READ_EP_NUM) ||
-	(ep == CYASSTORAGE_WRITE_EP_NUM)) {
-		/* max DMA request size HAL can handle by itself */
-		return CYASSTORAGE_MAX_XFER_SIZE;
-	} else {
-	/*
-	 * For the USB - Processor endpoints, the maximum transfer
-	 * size depends on the speed of USB operation. So, we use
-	 * the following constant to indicate to the API that
-	 * splitting of the data into chunks less that or equal to
-	 * the max transfer size should be handled internally.
-	 */
-
-		/* DEFINED AS 0xffffffff in cyasdma.h */
-		return CY_AS_DMA_MAX_SIZE_HW_SIZE;
-	}
-}
-
-/*
- * This function must be defined to set the state of the WAKEUP pin
- * on the WestBridge device.  Generally this is done via a GPIO of
- * some type.
- */
-cy_bool cy_as_hal_set_wakeup_pin(cy_as_hal_device_tag tag, cy_bool state)
-{
-	/*
-	 * Not supported as of now.
-	 */
-	return cy_false;
-}
-
-void cy_as_hal_pll_lock_loss_handler(cy_as_hal_device_tag tag)
-{
-	cy_as_hal_print_message("error: astoria PLL lock is lost\n");
-	cy_as_hal_print_message("please check the input voltage levels");
-	cy_as_hal_print_message("and clock, and restart the system\n");
-}
-
-/*
- * Below are the functions that must be defined to provide the basic
- * operating system services required by the API.
- */
-
-/*
- * This function is required by the API to allocate memory.
- * This function is expected to work exactly like malloc().
- */
-void *cy_as_hal_alloc(uint32_t cnt)
-{
-	return kmalloc(cnt, GFP_ATOMIC);
-}
-
-/*
- * This function is required by the API to free memory allocated
- * with CyAsHalAlloc().  This function is'expected to work exacly
- * like free().
- */
-void cy_as_hal_free(void *mem_p)
-{
-	kfree(mem_p);
-}
-
-/*
- * Allocator that can be used in interrupt context.
- * We have to ensure that the kmalloc call does not
- * sleep in this case.
- */
-void *cy_as_hal_c_b_alloc(uint32_t cnt)
-{
-	return kmalloc(cnt, GFP_ATOMIC);
-}
-
-/*
- * This function is required to set a block of memory to a
- * specific value.  This function is expected to work exactly
- * like memset()
- */
-void cy_as_hal_mem_set(void *ptr, uint8_t value, uint32_t cnt)
-{
-	memset(ptr, value, cnt);
-}
-
-/*
- * This function is expected to create a sleep channel.
- * The data structure that represents the sleep channel object
- * sleep channel (which is Linux "wait_queue_head_t wq" for this particular HAL)
- * passed as a pointer, and allpocated by the caller
- * (typically as a local var on the stack) "Create" word should read as
- * "SleepOn", this func doesn't actually create anything
- */
-cy_bool cy_as_hal_create_sleep_channel(cy_as_hal_sleep_channel *channel)
-{
-	init_waitqueue_head(&channel->wq);
-	return cy_true;
-}
-
-/*
- * for this particular HAL it doesn't actually destroy anything
- * since no actual sleep object is created in CreateSleepChannel()
- * sleep channel is given by the pointer in the argument.
- */
-cy_bool cy_as_hal_destroy_sleep_channel(cy_as_hal_sleep_channel *channel)
-{
-	return cy_true;
-}
-
-/*
- * platform specific wakeable Sleep implementation
- */
-cy_bool cy_as_hal_sleep_on(cy_as_hal_sleep_channel *channel, uint32_t ms)
-{
-	wait_event_interruptible_timeout(channel->wq, 0, ((ms * HZ)/1000));
-	return cy_true;
-}
-
-/*
- * wakes up the process waiting on the CHANNEL
- */
-cy_bool cy_as_hal_wake(cy_as_hal_sleep_channel *channel)
-{
-	wake_up_interruptible_all(&channel->wq);
-	return cy_true;
-}
-
-uint32_t cy_as_hal_disable_interrupts()
-{
-	if (0 == intr__enable)
-		;
-
-	intr__enable++;
-	return 0;
-}
-
-void cy_as_hal_enable_interrupts(uint32_t val)
-{
-	intr__enable--;
-	if (0 == intr__enable)
-		;
-}
-
-/*
- * Sleep atleast 150ns, cpu dependent
- */
-void cy_as_hal_sleep150(void)
-{
-	uint32_t i, j;
-
-	j = 0;
-	for (i = 0; i < 1000; i++)
-		j += (~i);
-}
-
-void cy_as_hal_sleep(uint32_t ms)
-{
-	cy_as_hal_sleep_channel channel;
-
-	cy_as_hal_create_sleep_channel(&channel);
-	cy_as_hal_sleep_on(&channel, ms);
-	cy_as_hal_destroy_sleep_channel(&channel);
-}
-
-cy_bool cy_as_hal_is_polling()
-{
-	return cy_false;
-}
-
-void cy_as_hal_c_b_free(void *ptr)
-{
-	cy_as_hal_free(ptr);
-}
-
-/*
- * suppose to reinstate the astoria registers
- * that may be clobbered in sleep mode
- */
-void cy_as_hal_init_dev_registers(cy_as_hal_device_tag tag,
-					cy_bool is_standby_wakeup)
-{
-	/* specific to SPI, no implementation required */
-	(void) tag;
-	(void) is_standby_wakeup;
-}
-
-void cy_as_hal_read_regs_before_standby(cy_as_hal_device_tag tag)
-{
-	/* specific to SPI, no implementation required */
-	(void) tag;
-}
-
-cy_bool cy_as_hal_sync_device_clocks(cy_as_hal_device_tag tag)
-{
-	/*
-	 * we are in asynchronous mode. so no need to handle this
-	 */
-	return true;
-}
-
-/*
- * init OMAP h/w resources
- */
-int start_o_m_a_p_kernel(const char *pgm,
-				cy_as_hal_device_tag *tag, cy_bool debug)
-{
-	cy_as_omap_dev_kernel *dev_p;
-	int i;
-	u16 data16[4];
-	u8 pncfg_reg;
-
-	/*
-	 * No debug mode support through argument as of now
-	 */
-	(void)debug;
-
-	DBGPRN(KERN_INFO"starting OMAP34xx HAL...\n");
-
-	/*
-	 * Initialize the HAL level endpoint DMA data.
-	 */
-	for (i = 0; i < sizeof(end_points)/sizeof(end_points[0]); i++) {
-		end_points[i].data_p = 0;
-		end_points[i].pending = cy_false;
-		end_points[i].size = 0;
-		end_points[i].type = cy_as_hal_none;
-		end_points[i].sg_list_enabled = cy_false;
-
-		/*
-		 * by default the DMA transfers to/from the E_ps don't
-		 * use sg_list that implies that the upper devices like
-		 * blockdevice have to enable it for the E_ps in their
-		 * initialization code
-		 */
-	}
-
-	/*
-	 * allocate memory for OMAP HAL
-	 */
-	dev_p = (cy_as_omap_dev_kernel *)cy_as_hal_alloc(
-						sizeof(cy_as_omap_dev_kernel));
-	if (dev_p == 0) {
-		cy_as_hal_print_message("out of memory allocating OMAP"
-					"device structure\n");
-		return 0;
-	}
-
-	dev_p->m_sig = CY_AS_OMAP_KERNEL_HAL_SIG;
-
-	/*
-	 * initialize OMAP hardware and StartOMAPKernelall gpio pins
-	 */
-	dev_p->m_addr_base = (void *)cy_as_hal_processor_hw_init();
-
-	/*
-	 * Now perform a hard reset of the device to have
-	 * the new settings take effect
-	 */
-	__gpio_set_value(AST_WAKEUP, 1);
-
-	/*
-	 * do Astoria  h/w reset
-	 */
-	DBGPRN(KERN_INFO"-_-_pulse -> westbridge RST pin\n");
-
-	/*
-	 * NEGATIVE PULSE on RST pin
-	 */
-	__gpio_set_value(AST_RESET, 0);
-	mdelay(1);
-	__gpio_set_value(AST_RESET, 1);
-	mdelay(50);
-
-	/*
-	* note AFTER reset PNAND interface is 8 bit mode
-	* so if gpmc Is configured in 8 bit mode upper half will be FF
-	*/
-	pncfg_reg = ast_p_nand_casdo_read(CY_AS_MEM_PNAND_CFG);
-
-#ifdef PNAND_16BIT_MODE
-
-	/*
-	 * switch to 16 bit mode, force NON-LNA LBD mode, 3 RA addr bytes
-	 */
-	ast_p_nand_casdi_write(CY_AS_MEM_PNAND_CFG, 0x0001);
-
-	/*
-	 * now in order to continue to talk to astoria
-	 * sw OMAP GPMC into 16 bit mode as well
-	 */
-	cy_as_hal_gpmc_enable_16bit_bus(cy_true);
-#else
-   /* Astoria and GPMC are already in 8 bit mode, just initialize PNAND_CFG */
-	ast_p_nand_casdi_write(CY_AS_MEM_PNAND_CFG, 0x0000);
-#endif
-
-   /*
-	*  NOTE: if you want to capture bus activity on the LA,
-	*  don't use printks in between the activities you want to capture.
-	*  prinks may take milliseconds, and the data of interest
-	*  will fall outside the LA capture window/buffer
-	*/
-	data16[0] = ast_p_nand_casdo_read(CY_AS_MEM_CM_WB_CFG_ID);
-	data16[1] = ast_p_nand_casdo_read(CY_AS_MEM_PNAND_CFG);
-
-	if (data16[0] != 0xA200) {
-		/*
-		 * astoria device is not found
-		 */
-		printk(KERN_ERR "ERROR: astoria device is not found, CY_AS_MEM_CM_WB_CFG_ID ");
-		printk(KERN_ERR "read returned:%4.4X: CY_AS_MEM_PNAND_CFG:%4.4x !\n",
-				data16[0], data16[0]);
-		goto bus_acc_error;
-	}
-
-	cy_as_hal_print_message(KERN_INFO" register access CASDO test:"
-				"\n CY_AS_MEM_CM_WB_CFG_ID:%4.4x\n"
-				"PNAND_CFG after RST:%4.4x\n "
-				"CY_AS_MEM_PNAND_CFG"
-				"after cfg_wr:%4.4x\n\n",
-				data16[0], pncfg_reg, data16[1]);
-
-	dev_p->thread_flag = 1;
-	spin_lock_init(&int_lock);
-	dev_p->m_next_p = m_omap_list_p;
-
-	m_omap_list_p = dev_p;
-	*tag = dev_p;
-
-	cy_as_hal_configure_interrupts((void *)dev_p);
-
-	cy_as_hal_print_message(KERN_INFO"OMAP3430__hal started tag:%p"
-				", kernel HZ:%d\n", dev_p, HZ);
-
-	/*
-	 *make processor to storage endpoints SG assisted by default
-	 */
-	cy_as_hal_set_ep_dma_mode(4, true);
-	cy_as_hal_set_ep_dma_mode(8, true);
-
-	return 1;
-
-	/*
-	 * there's been a NAND bus access error or
-	 * astoria device is not connected
-	 */
-bus_acc_error:
-	/*
-	 * at this point hal tag hasn't been set yet
-	 * so the device will not call omap_stop
-	 */
-	cy_as_hal_omap_hardware_deinit(dev_p);
-	cy_as_hal_free(dev_p);
-	return 0;
-}
-
-#else
-/*
- * Some compilers do not like empty C files, so if the OMAP hal is not being
- * compiled, we compile this single function.  We do this so that for a
- * given target HAL there are not multiple sources for the HAL functions.
- */
-void my_o_m_a_p_kernel_hal_dummy_function(void)
-{
-}
-
-#endif
diff --git a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/cyashaldef.h b/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/cyashaldef.h
deleted file mode 100644
index c05e6d6cb702..000000000000
--- a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/cyashaldef.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* Cypress West Bridge API header file (cyashaldef.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASHALDEF_H_
-#define _INCLUDED_CYASHALDEF_H_
-
-/* Summary
- * If set to TRUE, the basic numeric types are defined by the
- * West Bridge API code
- *
- * Description
- * The West Bridge API relies on some basic integral types to be
- * defined.  These types include uint8_t, int8_t, uint16_t,
- * int16_t, uint32_t, and int32_t.  If this macro is defined the
- * West Bridge API will define these types based on some basic
- * assumptions.  If this value is set and the West Bridge API is
- * used to set these types, the definition of these types must be
- * examined to insure that they are appropriate for the given
- * target architecture and compiler.
- *
- * Notes
- * It is preferred that if the basic platform development
- * environment defines these types that the CY_DEFINE_BASIC_TYPES
- * macro be undefined and the appropriate target system header file
- * be added to the file cyashaldef.h.
- */
-
-#include <linux/types.h>
-
-
-#if !defined(__doxygen__)
-typedef int cy_bool;
-#define cy_true				(1)
-#define cy_false				(0)
-#endif
-
-#endif			/* _INCLUDED_CYASHALDEF_H_ */
diff --git a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h b/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h
deleted file mode 100644
index 6426ea61f3d4..000000000000
--- a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/* Cypress Antioch HAL for OMAP KERNEL header file (cyashalomapkernel.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-/*
- * This file contains the definition of the hardware abstraction
- * layer on OMAP3430 talking to the West Bridge Astoria device
- */
-
-
-#ifndef _INCLUDED_CYASHALOMAP_KERNEL_H_
-#define _INCLUDED_CYASHALOMAP_KERNEL_H_
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/wait.h>
-#include <linux/string.h>
-/* include does not seem to work
- * moving for patch submission
-#include <mach/gpmc.h>
-*/
-#include <linux/../../arch/arm/plat-omap/include/plat/gpmc.h>
-typedef struct cy_as_hal_sleep_channel_t {
-	wait_queue_head_t wq;
-} cy_as_hal_sleep_channel;
-
-/* moved to staging location, eventual location
- * considered is here
-#include <mach/westbridge/cyashaldef.h>
-#include <linux/westbridge/cyastypes.h>
-#include <linux/westbridge/cyas_cplus_start.h>
-*/
-#include "../cyashaldef.h"
-#include "../../../../../../../include/linux/westbridge/cyastypes.h"
-#include "../../../../../../../include/linux/westbridge/cyas_cplus_start.h"
-#include "cyasomapdev_kernel.h"
-
-/*
- * Below are the data structures that must be defined by the HAL layer
- */
-
-/*
- * The HAL layer must define a TAG for identifying a specific Astoria
- * device in the system. In this case the tag is a void * which is
- * really an OMAP device pointer
- */
-typedef void *cy_as_hal_device_tag;
-
-
-/* This must be included after the CyAsHalDeviceTag type is defined */
-
-/* moved to staging location, eventual location
- * considered is here
- * #include <linux/westbridge/cyashalcb.h>
-*/
-#include "../../../../../../../include/linux/westbridge/cyashalcb.h"
-/*
- * Below are the functions that communicate with the West Bridge
- * device.  These are system dependent and must be defined by
- * the HAL layer for a given system.
- */
-
-/*
- * This function must be defined to write a register within the Antioch
- * device.  The addr value is the address of the register to write with
- * respect to the base address of the Antioch device.
- */
-void
-cy_as_hal_write_register(cy_as_hal_device_tag tag,
-	uint16_t addr, uint16_t data);
-
-/*
- * This function must be defined to read a register from
- * the west bridge device.  The addr value is the address of
- * the register to read with respect to the base address
- * of the west bridge device.
- */
-uint16_t
-cy_as_hal_read_register(cy_as_hal_device_tag tag, uint16_t addr);
-
-/*
- * This function must be defined to transfer a block of data
- * to the west bridge device.  This function can use the burst write
- * (DMA) capabilities of Antioch to do this, or it can just copy
- * the data using writes.
- */
-void
-cy_as_hal_dma_setup_write(cy_as_hal_device_tag tag,
-	uint8_t ep, void *buf, uint32_t size, uint16_t maxsize);
-
-/*
- * This function must be defined to transfer a block of data
- * from the Antioch device.  This function can use the burst
- * read (DMA) capabilities of Antioch to do this, or it can
- * just copy the data using reads.
- */
-void
-cy_as_hal_dma_setup_read(cy_as_hal_device_tag tag, uint8_t ep,
-	void *buf, uint32_t size, uint16_t maxsize);
-
-/*
- * This function must be defined to cancel any pending DMA request.
- */
-void
-cy_as_hal_dma_cancel_request(cy_as_hal_device_tag tag, uint8_t ep);
-
-/*
- * This function must be defined to allow the Antioch API to
- * register a callback function that is called when a DMA transfer
- * is complete.
- */
-void
-cy_as_hal_dma_register_callback(cy_as_hal_device_tag tag,
-	cy_as_hal_dma_complete_callback cb);
-
-/*
- * This function must be defined to return the maximum size of DMA
- * request that can be handled on the given endpoint.  The return
- * value should be the maximum size in bytes that the DMA module can
- * handle.
- */
-uint32_t
-cy_as_hal_dma_max_request_size(cy_as_hal_device_tag tag,
-	cy_as_end_point_number_t ep);
-
-/*
- * This function must be defined to set the state of the WAKEUP pin
- * on the Antioch device.  Generally this is done via a GPIO of some
- * type.
- */
-cy_bool
-cy_as_hal_set_wakeup_pin(cy_as_hal_device_tag tag, cy_bool state);
-
-/*
- * This function is called when the Antioch PLL loses lock, because
- * of a problem in the supply voltage or the input clock.
- */
-void
-cy_as_hal_pll_lock_loss_handler(cy_as_hal_device_tag tag);
-
-
-/**********************************************************************
- *
- * Below are the functions that must be defined to provide the basic
- * operating system services required by the API.
- *
-***********************************************************************/
-
-/*
- * This function is required by the API to allocate memory.  This function
- * is expected to work exactly like malloc().
- */
-void *
-cy_as_hal_alloc(uint32_t cnt);
-
-/*
- * This function is required by the API to free memory allocated with
- * CyAsHalAlloc().  This function is expected to work exacly like free().
- */
-void
-cy_as_hal_free(void *mem_p);
-
-/*
- * This function is required by the API to allocate memory during a
- * callback.  This function must be able to provide storage at inturupt
- * time.
- */
-void *
-cy_as_hal_c_b_alloc(uint32_t cnt);
-
-/*
- * This function is required by the API to free memory allocated with
- * CyAsCBHalAlloc().
- */
-void
-cy_as_hal_c_b_free(void *ptr);
-
-/*
- * This function is required to set a block of memory to a specific
- * value.  This function is expected to work exactly like memset()
- */
-void
-cy_as_hal_mem_set(void *ptr, uint8_t value, uint32_t cnt);
-
-/*
- * This function is expected to create a sleep channel.  The data
- * structure that represents the sleep channel is given by the
- * pointer in the argument.
- */
-cy_bool
-cy_as_hal_create_sleep_channel(cy_as_hal_sleep_channel *channel);
-
-/*
- * This function is expected to destroy a sleep channel.  The data
- * structure that represents the sleep channel is given by
- * the pointer in the argument.
- */
-
-
-cy_bool
-cy_as_hal_destroy_sleep_channel(cy_as_hal_sleep_channel *channel);
-
-cy_bool
-cy_as_hal_sleep_on(cy_as_hal_sleep_channel *channel, uint32_t ms);
-
-cy_bool
-cy_as_hal_wake(cy_as_hal_sleep_channel *channel);
-
-uint32_t
-cy_as_hal_disable_interrupts(void);
-
-void
-cy_as_hal_enable_interrupts(uint32_t);
-
-void
-cy_as_hal_sleep150(void);
-
-void
-cy_as_hal_sleep(uint32_t ms);
-
-cy_bool
-cy_as_hal_is_polling(void);
-
-void cy_as_hal_init_dev_registers(cy_as_hal_device_tag tag,
-	cy_bool is_standby_wakeup);
-
-/*
- * required only in spi mode
- */
-cy_bool cy_as_hal_sync_device_clocks(cy_as_hal_device_tag tag);
-
-void cy_as_hal_read_regs_before_standby(cy_as_hal_device_tag tag);
-
-
-#ifndef NDEBUG
-#define cy_as_hal_assert(cond) if (!(cond))\
-	printk(KERN_WARNING"assertion failed at %s:%d\n", __FILE__, __LINE__);
-#else
-#define cy_as_hal_assert(cond)
-#endif
-
-#define cy_as_hal_print_message printk
-
-/* removable debug printks */
-#ifndef WESTBRIDGE_NDEBUG
-#define DBG_PRINT_ENABLED
-#endif
-
-/*#define MBOX_ACCESS_DBG_PRINT_ENABLED*/
-
-
-#ifdef DBG_PRINT_ENABLED
- /* Debug printing enabled */
-
- #define DBGPRN(...) printk(__VA_ARGS__)
- #define DBGPRN_FUNC_NAME	printk("<1> %x:_func: %s\n", \
-		current->pid, __func__)
-
-#else
- /** NO DEBUG PRINTING **/
- #define DBGPRN(...)
- #define DBGPRN_FUNC_NAME
-
-#endif
-
-/*
-CyAsMiscSetLogLevel(uint8_t level)
-{
-	debug_level = level;
-}
-
-#ifdef CY_AS_LOG_SUPPORT
-
-void
-cy_as_log_debug_message(int level, const char *str)
-{
-	if (level <= debug_level)
-		cy_as_hal_print_message("log %d: %s\n", level, str);
-}
-*/
-
-
-/*
- * print buffer helper
- */
-void cyashal_prn_buf(void  *buf, uint16_t offset, int len);
-
-/*
- * These are the functions that are not part of the HAL layer,
- * but are required to be called for this HAL.
- */
-int start_o_m_a_p_kernel(const char *pgm,
-	cy_as_hal_device_tag *tag, cy_bool debug);
-int stop_o_m_a_p_kernel(const char *pgm, cy_as_hal_device_tag tag);
-int omap_start_intr(cy_as_hal_device_tag tag);
-void cy_as_hal_set_ep_dma_mode(uint8_t ep, bool sg_xfer_enabled);
-
-/* moved to staging location
-#include <linux/westbridge/cyas_cplus_end.h>
-*/
-#include "../../../../../../../include/linux/westbridge/cyas_cplus_start.h"
-#endif
diff --git a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasmemmap.h b/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasmemmap.h
deleted file mode 100644
index 46f06ee29357..000000000000
--- a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasmemmap.h
+++ /dev/null
@@ -1,558 +0,0 @@
-/*
- OMAP3430 ZOOM MDK astoria interface defs(cyasmemmap.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-/* include does not seem to work
- * moving for patch submission
-#include <mach/gpmc.h>
-#include <mach/mux.h>
-*/
-#include <linux/../../arch/arm/plat-omap/include/plat/gpmc.h>
-#include <linux/../../arch/arm/plat-omap/include/plat/mux.h>
-
-#ifndef _INCLUDED_CYASMEMMAP_H_
-#define _INCLUDED_CYASMEMMAP_H_
-
-/* defines copied from OMAP kernel branch */
-
-#define OMAP2_PULL_UP		(1 << 4)
-#define OMAP2_PULL_ENA		(1 << 3)
-#define	OMAP34XX_MUX_MODE0	0
-#define	OMAP34XX_MUX_MODE4	4
-#define OMAP3_INPUT_EN		(1 << 8)
-#define OMAP34XX_PIN_INPUT_PULLUP	(OMAP2_PULL_ENA | OMAP3_INPUT_EN \
-						| OMAP2_PULL_UP)
-
-/*
- * for OMAP3430 <-> astoria :   ADmux mode, 8 bit data path
- * WB Signal-	OMAP3430 signal	    COMMENTS
- *  --------------------------- --------------------
- * CS_L	 -GPMC_nCS4_GPIO_53	ZOOM I SOM board
- *								signal: up_nCS_A_EXT
- * AD[7:0]-upD[7:0]		  	buffered on the
- *								transposer board
- * 							GPMC_ADDR
- *							[A8:A1]->upD[7:0]
- * INT#	-GPMC_nWP_GPIO_62
- * DACK	-N/C				 not connected
- * WAKEUP-GPIO_167
- * RESET-GPIO_126
- * R/B	-GPMC_WAIT2_GPIO_64
- * -------------------------------------------
- * The address range for nCS1B is 0x06000000 - 0x07FF FFFF.
-*/
-
-/*
- *OMAP_ZOOM LEDS
- */
-#define LED_0 156
-#define LED_1 128
-#define LED_2 64
-#define LED_3 60
-
-#define HIGH 1
-#define LOW  1
-
-/*
- *omap GPIO number
- */
-#define AST_WAKEUP	 167
-#define AST_RESET	 126
-#define AST__rn_b	 64
-
-/*
- * NOTE THIS PIN IS USED AS WP for OMAP NAND
- */
-#define AST_INT	 62
-
-/*
- * as an I/O, it is actually controlled by GPMC
- */
-#define AST_CS	55
-
-
-/*
- *GPMC prefetch engine
- */
-
-/* register and its bit fields */
-#define GPMC_PREFETCH_CONFIG1 0x01E0
-
-	/*32 bytes for 16 bit pnand mode*/
-	#define PFE_THRESHOLD 31
-
-	/*
-	 * bit fields
-	 * PF_ACCESSMODE  - 0 - read mode, 1 - write mode
-	 * PF_DMAMODE - 0 - default only intr line signal will be generated
-	 * PF_SYNCHROMODE - default 0 - engin will start access as soon as
-	 *					ctrl re STARTENGINE is set
-	 * PF_WAITPINSEL - FOR synchro mode  selects WAIT pin whch edge
-	 *					will be monitored
-	 * PF_EN_ENGINE - 1- ENABLES ENGINE, but it needs to be started after
-	 *					that C ctrl reg bit 0
-	 * PF_FIFO_THRESHOLD - FIFO threshold in number of BUS(8 or 16) words
-	 * PF_WEIGHTED_PRIO  - NUM of cycles granted to PFE if RND_ROBIN
-	 *					prioritization is enabled
-	 * PF_ROUND_ROBIN  - if enabled, gives priority to other CS, but
-	 *					reserves NUM of cycles for PFE's turn
-	 * PF_ENGIN_CS_SEL  - GPMC CS assotiated with PFE function
-	 */
-	#define PF_ACCESSMODE  (0 << 0)
-	#define PF_DMAMODE	 (0 << 2)
-	#define PF_SYNCHROMODE (0 << 3)
-	#define PF_WAITPINSEL  (0x0 << 4)
-	#define PF_EN_ENGINE   (1 << 7)
-	#define PF_FIFO_THRESHOLD (PFE_THRESHOLD << 8)
-	#define PF_WEIGHTED_PRIO (0x0 << 16)
-	#define PF_ROUND_ROBIN   (0 << 23)
-	#define PF_ENGIN_CS_SEL (AST_GPMC_CS << 24)
-	#define PF_EN_OPTIM_ACC (0 << 27)
-	#define PF_CYCLEOPTIM   (0x0 << 28)
-
-#define GPMC_PREFETCH_CONFIG1_VAL (PF_ACCESSMODE | \
-				PF_DMAMODE | PF_SYNCHROMODE | \
-				PF_WAITPINSEL | PF_EN_ENGINE | \
-				PF_FIFO_THRESHOLD | PF_FIFO_THRESHOLD | \
-				PF_WEIGHTED_PRIO | PF_ROUND_ROBIN | \
-				PF_ENGIN_CS_SEL | PF_EN_OPTIM_ACC | \
-				PF_CYCLEOPTIM)
-
-/* register and its bit fields */
-#define GPMC_PREFETCH_CONFIG2 0x01E4
-	/*
-	 * bit fields
-	 * 14 bit field NOTE this counts is also
-	 * is in number of BUS(8 or 16) words
-	 */
-	#define PF_TRANSFERCOUNT (0x000)
-
-
-/* register and its bit fields */
-#define GPMC_PREFETCH_CONTROL 0x01EC
-	/*
-	 * bit fields , ONLY BIT 0 is implemented
-	 * PFWE engin must be programmed with this bit = 0
-	 */
-	#define PFPW_STARTENGINE (1 << 0)
-
-/* register and its bit fields */
-#define GPMC_PREFETCH_STATUS  0x01F0
-
-	/* */
-	#define PFE_FIFO_THRESHOLD (1 << 16)
-
-/*
- * GPMC posted write/prefetch engine end
- */
-
-
-/*
- * chip select number on GPMC ( 0..7 )
- */
-#define AST_GPMC_CS 4
-
-/*
- * not connected
- */
-#define AST_DACK	00
-
-
-/*
- * Physical address above the NAND flash
- * we use CS For mapping in OMAP3430 RAM space use 0x0600 0000
- */
-#define CYAS_DEV_BASE_ADDR  (0x20000000)
-
-#define CYAS_DEV_MAX_ADDR   (0xFF)
-#define CYAS_DEV_ADDR_RANGE (CYAS_DEV_MAX_ADDR << 1)
-
-#ifdef p_s_r_a_m_INTERFACE
- /* in CRAM or PSRAM mode OMAP A1..An wires-> Astoria, there is no A0 line */
- #define CYAS_DEV_CALC_ADDR(cyas_addr) (cyas_addr << 1)
- #define CYAS_DEV_CALC_EP_ADDR(ep) (ep << 1)
-#else
- /*
-  * For pNAND interface it depends on NAND emulation mode
-  * SBD/LBD etc we use NON-LNA_LBD  mode, so it goes like this:
-  * forlbd   <CMD><CA0,CA1,RA0,RA1,RA2> <CMD>,
-  * where CA1 address must have bits 2,3 = "11"
-  * ep is mapped into RA1 bits {4:0}
-  */
- #define CYAS_DEV_CALC_ADDR(cyas_addr) (cyas_addr | 0x0c00)
- #define CYAS_DEV_CALC_EP_ADDR(ep) ep
-#endif
-
-/*
- *OMAP3430 i/o access macros
- */
-#define IORD32(addr) (*(volatile u32  *)(addr))
-#define IOWR32(addr, val) (*(volatile u32 *)(addr) = val)
-
-#define IORD16(addr) (*(volatile u16  *)(addr))
-#define IOWR16(addr, val) (*(volatile u16 *)(addr) = val)
-
-#define IORD8(addr) (*(volatile u8  *)(addr))
-#define IOWR8(addr, val) (*(volatile u8 *)(addr) = val)
-
-/*
- * local defines for accessing to OMAP GPIO ***
- */
-#define CTLPADCONF_BASE_ADDR 0x48002000
-#define CTLPADCONF_SIZE 0x1000
-
-#define GPIO1_BASE_ADDR 0x48310000
-#define GPIO2_BASE_ADDR 0x49050000
-#define GPIO3_BASE_ADDR 0x49052000
-#define GPIO4_BASE_ADDR 0x49054000
-#define GPIO5_BASE_ADDR 0x49056000
-#define GPIO6_BASE_ADDR 0x49058000
-#define GPIO_SPACE_SIZE 0x1000
-
-
-/*
- * OMAP3430 GPMC timing for pNAND interface
- */
-#define GPMC_BASE 0x6E000000
-#define GPMC_REGION_SIZE 0x1000
-#define GPMC_CONFIG_REG (0x50)
-
-/*
- * bit 0 in the GPMC_CONFIG_REG
- */
-#define NAND_FORCE_POSTED_WRITE_B 1
-
-/*
- * WAIT2STATUS, must be (1 << 10)
- */
-#define AS_WAIT_PIN_MASK (1 << 10)
-
-
-/*
- * GPMC_CONFIG(reg number [1..7] [for chip sel CS[0..7])
- */
-#define GPMC_CFG_REG(N, CS) ((0x60 + (4*(N-1))) + (0x30*CS))
-
-/*
- *gpmc nand registers for CS4
- */
-#define AST_GPMC_NAND_CMD		(0x7c + (0x30*AST_GPMC_CS))
-#define AST_GPMC_NAND_ADDR		(0x80 + (0x30*AST_GPMC_CS))
-#define AST_GPMC_NAND_DATA		(0x84 + (0x30*AST_GPMC_CS))
-
-#define GPMC_STAT_REG		(0x54)
-#define GPMC_ERR_TYPE	   (0x48)
-
-/*
- * we get "gpmc_base" from kernel
- */
-#define GPMC_VMA(offset) (gpmc_base + offset)
-
-/*
- * GPMC CS space VMA start address
- */
-#define GPMC_CS_VMA(offset) (gpmc_data_vma + offset)
-
-/*
- * PAD_CFG mux space VMA
- */
-#define PADCFG_VMA(offset) (iomux_vma + offset)
-
-/*
- * CONFIG1: by default, sngle access, async r/w RD_MULTIPLE[30]
- * WR_MULTIPLE[28]; GPMC_FCL_DIV[1:0]
- */
-#define GPMC_FCLK_DIV ((0) << 0)
-
-/*
- * ADDITIONAL DIVIDER FOR ALL TIMING PARAMS
- */
-#define TIME_GRAN_SCALE ((0) << 4)
-
-/*
- * for use by gpmc_set_timings api, measured in ns, not clocks
- */
-#define WB_GPMC_BUSCYC_t  (7 * 6)
-#define WB_GPMC_CS_t_o_n	(0)
-#define WB_GPMC_ADV_t_o_n   (0)
-#define WB_GPMC_OE_t_o_n	(0)
-#define WB_GPMC_OE_t_o_f_f   (5 * 6)
-#define WB_GPMC_WE_t_o_n	(1 * 6)
-#define WB_GPMC_WE_t_o_f_f   (5 * 6)
-#define WB_GPMC_RDS_ADJ   (2 * 6)
-#define WB_GPMC_RD_t_a_c_c   (WB_GPMC_OE_t_o_f_f + WB_GPMC_RDS_ADJ)
-#define WB_GPMC_WR_t_a_c_c  (WB_GPMC_BUSCYC_t)
-
-#define DIR_OUT	0
-#define DIR_INP	1
-#define DRV_HI	1
-#define DRV_LO	0
-
-/*
- * GPMC_CONFIG7[cs] register bit fields
- * AS_CS_MASK - 3 bit mask for  A26,A25,A24,
- * AS_CS_BADDR - 6 BIT VALUE  A29 ...A24
- * CSVALID_B - CSVALID bit on GPMC_CONFIG7[cs] register
- */
-#define AS_CS_MASK	(0X7 << 8)
-#define AS_CS_BADDR	 0x02
-#define CSVALID_B (1 << 6)
-
-/*
- * DEFINE OMAP34XX GPIO OFFSETS (should have been defined in kernel /arch
- * these are offsets from the BASE_ADDRESS of the GPIO BLOCK
- */
-#define GPIO_REVISION		0x000
-#define GPIO_SYSCONFIG		0x010
-#define GPIO_SYSSTATUS1		0x014
-#define GPIO_IRQSTATUS1		0x018
-#define GPIO_IRQENABLE1		0x01C
-#define GPIO_IRQSTATUS2		0x028
-#define GPIO_CTRL		0x030
-#define GPIO_OE			0x034
-#define GPIO_DATA_IN		0x038
-#define GPIO_DATA_OUT		0x03C
-#define GPIO_LEVELDETECT0	   0x040
-#define GPIO_LEVELDETECT1	   0x044
-#define GPIO_RISINGDETECT	   0x048
-#define GPIO_FALLINGDETECT	  0x04c
-#define GPIO_CLEAR_DATAOUT	0x090
-#define GPIO_SET_DATAOUT	0x094
-
-typedef struct  {
-	char	*name;
-	u32		phy_addr;
-	u32		virt_addr;
-	u32		size;
-} io2vma_tab_t;
-
-/*
- * GPIO phy to translation VMA table
- */
-static  io2vma_tab_t gpio_vma_tab[6] = {
-		{"GPIO1_BASE_ADDR", GPIO1_BASE_ADDR , 0 , GPIO_SPACE_SIZE},
-		{"GPIO2_BASE_ADDR", GPIO2_BASE_ADDR , 0 , GPIO_SPACE_SIZE},
-		{"GPIO3_BASE_ADDR", GPIO3_BASE_ADDR , 0 , GPIO_SPACE_SIZE},
-		{"GPIO4_BASE_ADDR", GPIO4_BASE_ADDR , 0 , GPIO_SPACE_SIZE},
-		{"GPIO5_BASE_ADDR", GPIO5_BASE_ADDR , 0 , GPIO_SPACE_SIZE},
-		{"GPIO6_BASE_ADDR", GPIO6_BASE_ADDR , 0 , GPIO_SPACE_SIZE}
-};
-/*
- * name - USER signal name assigned to the pin ( for printks)
- * mux_func -  enum index NAME for the pad_cfg function
- * pin_num - pin_number if mux_func is GPIO, if not a GPIO it is -1
- * mux_ptr - pointer to the corresponding pad_cfg_reg
- *			(used for pad release )
- * mux_save - preserve here original PAD_CNF value for this
- *			pin (used for pad release)
- * dir - if GPIO: 0 - OUT , 1 - IN
- * dir_save - save original pin direction
- * drv - initial drive level "0" or "1"
- * drv_save - save original pin drive level
- * valid - 1 if successfuly configured
-*/
-typedef struct  {
-	char *name;
-	u32 mux_func;
-	int pin_num;
-	u16 *mux_ptr;
-	u16 mux_save;
-	u8 dir;
-	u8 dir_save;
-	u8 drv;
-	u8 drv_save;
-	u8 valid;
-} user_pad_cfg_t;
-
-/*
- * need to ensure that enums are in sync with the
- * omap_mux_pin_cfg table, these enums designate
- * functions that OMAP pads can be configured to
- */
-enum {
-	B23_OMAP3430_GPIO_167,
-	D23_OMAP3430_GPIO_126,
-	H1_OMAP3430_GPIO_62,
-	H1_OMAP3430_GPMC_n_w_p,
-	T8_OMAP3430_GPMC_n_c_s4,
-	T8_OMAP3430_GPIO_55,
-	R25_OMAP3430_GPIO_156,
-	R27_OMAP3430_GPIO_128,
-	K8_OMAP3430_GPIO_64,
-	K8_GPMC_WAIT2,
-	G3_OMAP3430_GPIO_60,
-	G3_OMAP3430_n_b_e0_CLE,
-	C6_GPMC_WAIT3,
-	J1_OMAP3430_GPIO_61,
-	C6_OMAP3430_GPIO_65,
-
-	END_OF_TABLE
-};
-
-/*
- * number of GPIOS we plan to grab
- */
-#define GPIO_SLOTS 8
-
-/*
- *  user_pads_init() reads(and saves) from/to this table
- *  used in conjunction with omap_3430_mux_t table in .h file
- *  because the way it's done in the kernel code
- *  TODO: implement restore of the the original cfg and i/o regs
- */
-
-static user_pad_cfg_t user_pad_cfg[] = {
-		 /*
-		 * name,pad_func,pin_num, mux_ptr, mux_sav, dir,
-		 *    dir_sav, drv, drv_save, valid
-		 */
-		{"AST_WAKEUP", B23_OMAP3430_GPIO_167, 167, NULL, 0,
-				DIR_OUT, 0, DRV_HI, 0, 0},
-		{"AST_RESET", D23_OMAP3430_GPIO_126, 126, NULL,	0,
-				DIR_OUT, 0, DRV_HI, 0, 0},
-		{"AST__rn_b", K8_GPMC_WAIT2, 64, NULL, 0,
-				DIR_INP, 0,	0, 0, 0},
-		{"AST_INTR", H1_OMAP3430_GPIO_62, 62, NULL, 0,
-				DIR_INP, 0,	DRV_HI, 0, 0},
-		{"AST_CS", T8_OMAP3430_GPMC_n_c_s4, 55, NULL, 0,
-				DIR_OUT, 0,	DRV_HI, 0, 0},
-		{"LED_0", R25_OMAP3430_GPIO_156, 156, NULL, 0,
-				DIR_OUT, 0,	DRV_LO, 0, 0},
-		{"LED_1", R27_OMAP3430_GPIO_128, 128, NULL, 0,
-				DIR_OUT, 0,	DRV_LO, 0, 0},
-		{"AST_CLE", G3_OMAP3430_n_b_e0_CLE , 60, NULL, 0,
-				DIR_OUT, 0,	DRV_LO, 0, 0},
-		/*
-		 * Z terminator, must always be present
-		 * for sanity check, don't remove
-		 */
-		{NULL}
-};
-
-#define GPIO_BANK(pin) (pin >> 5)
-#define REG_WIDTH 32
-#define GPIO_REG_VMA(pin_num, offset) \
-	(gpio_vma_tab[GPIO_BANK(pin_num)].virt_addr + offset)
-
-/*
- * OMAP GPIO_REG 32 BIT MASK for a bit or
- * flag in gpio_No[0..191]  apply it to a 32 bit
- * location to set clear or check on a corresponding
- * gpio bit or flag
- */
-#define GPIO_REG_MASK(pin_num) (1 << \
-		(pin_num - (GPIO_BANK(pin_num) * REG_WIDTH)))
-
-/*
- * OMAP GPIO registers bitwise access macros
- */
-
-#define OMAP_GPIO_BIT(pin_num, reg) \
-	((*((u32 *)GPIO_REG_VMA(pin_num, reg)) \
-	& GPIO_REG_MASK(pin_num)) ? 1 : 0)
-
-#define RD_OMAP_GPIO_BIT(pin_num, v) OMAP_GPIO_BIT(pin_num, reg)
-
-/*
- *these are superfast set/clr bitbang macro, 48ns cyc tyme
- */
-#define OMAP_SET_GPIO(pin_num) \
-	(*(u32 *)GPIO_REG_VMA(pin_num, GPIO_SET_DATAOUT) \
-	= GPIO_REG_MASK(pin_num))
-#define OMAP_CLR_GPIO(pin_num) \
-	(*(u32 *)GPIO_REG_VMA(pin_num, GPIO_CLEAR_DATAOUT) \
-	= GPIO_REG_MASK(pin_num))
-
-#define WR_OMAP_GPIO_BIT(pin_num, v) \
-	(v ? (*(u32 *)GPIO_REG_VMA(pin_num, \
-	GPIO_SET_DATAOUT) = GPIO_REG_MASK(pin_num)) \
-	: (*(u32 *)GPIO_REG_VMA(pin_num, \
-	GPIO_CLEAR_DATAOUT) = GPIO_REG_MASK(pin_num)))
-
-/*
- * Note this pin cfg mimicks similar implementation
- * in linux kernel, which unfortunately doesn't allow
- * us to dynamically insert new custom GPIO mux
- * configurations all REG definitions used in this
- * applications. to add a new pad_cfg function, insert
- * a new ENUM and new pin_cfg entry in omap_mux_pin_cfg[]
- * table below
- *
- * offset - note this is a word offset since the
- *		SCM regs are 16 bit packed in one 32 bit word
- * mux_val - just enough to describe pins used
- */
-typedef struct  {
-	char	*name;
-	u16		offset;
-	u16	 mux_val;
-} omap_3430_mux_t;
-
-/*
- * "OUTIN" is configuration when DATA reg drives the
- * pin but the level at the pin can be sensed
- */
-#define PAD_AS_OUTIN (OMAP34XX_MUX_MODE4 | \
-		OMAP34XX_PIN_OUTPUT | OMAP34XX_PIN_INPUT)
-
-omap_3430_mux_t omap_mux_pin_cfg[] = {
-	/*
-	 * B23_OMAP3430_GPIO_167 - GPIO func to PAD 167 WB wakeup
-	 * D23_OMAP3430_GPIO_126 - drive GPIO_126 ( AST RESET)
-	 * H1_OMAP3430_GPIO_62 - need a pullup on this pin
-	 * H1_OMAP3430_GPMC_n_w_p -  GPMC NAND CTRL n_w_p out
-	 * T8_OMAP3430_GPMC_n_c_s4" - T8 is controlled b_y GPMC NAND ctrl
-	 * R25_OMAP3430_GPIO_156 - OMAPZOOM drive LED_0
-	 * R27_OMAP3430_GPIO_128 - OMAPZOOM drive LED_1
-	 * K8_OMAP3430_GPIO_64 - OMAPZOOM drive LED_2
-	 * K8_GPMC_WAIT2 - GPMC WAIT2 function on PAD K8
-	 * G3_OMAP3430_GPIO_60 - OMAPZOOM drive LED_3
-	 * G3_OMAP3430_n_b_e0_CLE -GPMC NAND ctrl CLE signal
-	*/
-
-	{"B23_OMAP3430_GPIO_167", 0x0130, (OMAP34XX_MUX_MODE4)},
-	{"D23_OMAP3430_GPIO_126", 0x0132, (OMAP34XX_MUX_MODE4)},
-	{"H1_OMAP3430_GPIO_62",   0x00CA, (OMAP34XX_MUX_MODE4 |
-				OMAP3_INPUT_EN | OMAP34XX_PIN_INPUT_PULLUP) },
-	{"H1_OMAP3430_GPMC_n_w_p",  0x00CA, (OMAP34XX_MUX_MODE0)},
-	{"T8_OMAP3430_GPMC_n_c_s4", 0x00B6, (OMAP34XX_MUX_MODE0) },
-	{"T8_OMAP3430_GPIO_55",   0x00B6, (OMAP34XX_MUX_MODE4) },
-	{"R25_OMAP3430_GPIO_156", 0x018C, (OMAP34XX_MUX_MODE4) },
-	{"R27_OMAP3430_GPIO_128", 0x0154, (OMAP34XX_MUX_MODE4) },
-	{"K8_OMAP3430_GPIO_64",   0x00d0, (OMAP34XX_MUX_MODE4) },
-	{"K8_GPMC_WAIT2",		  0x00d0, (OMAP34XX_MUX_MODE0) },
-	{"G3_OMAP3430_GPIO_60",   0x00C6, (OMAP34XX_MUX_MODE4 |
-				OMAP3_INPUT_EN)},
-	{"G3_OMAP3430_n_b_e0_CLE",  0x00C6, (OMAP34XX_MUX_MODE0)},
-	{"C6_GPMC_WAIT3", 0x00d2, (OMAP34XX_MUX_MODE0)},
-	{"C6_OMAP3430_GPIO_65", 0x00d2, (OMAP34XX_MUX_MODE4 |
-				OMAP3_INPUT_EN)},
-	{"J1_OMAP3430_GPIO_61", 0x00C8, (OMAP34XX_MUX_MODE4 |
-				OMAP3_INPUT_EN | OMAP34XX_PIN_INPUT_PULLUP)},
-	/*
-	 * don't remove, used for sanity check.
-	 */
-	{"END_OF_TABLE"}
-};
-
-
-#endif /* _INCLUDED_CYASMEMMAP_H_ */
-
-/*[]*/
diff --git a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasomapdev_kernel.h b/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasomapdev_kernel.h
deleted file mode 100644
index 5a64bb6bb053..000000000000
--- a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasomapdev_kernel.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* Cypress Antioch OMAP KERNEL file (cyanomapdev_kernel.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor,
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef __CY_AS_OMAP_DEV_KERNEL_H__
-#define __CY_AS_OMAP_DEV_KERNEL_H__
-
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/completion.h>
-
-/* include does not seem to work
- * moving for patch submission
-#include <mach/gpmc.h>
-*/
-#include <linux/../../arch/arm/plat-omap/include/plat/gpmc.h>
-
-/*
- * Constants
- */
-#define CY_AS_OMAP_KERNEL_HAL_SIG		(0x1441)
-
-
-/*
- * Data structures
- */
-typedef struct cy_as_omap_dev_kernel {
-	/* This is the signature for this data structure */
-	unsigned int m_sig;
-
-	/* Address base of Antioch Device */
-	void *m_addr_base;
-
-	/* This is a pointer to the next Antioch device in the system */
-	struct cy_as_omap_dev_kernel *m_next_p;
-
-	/* This is for thread sync */
-	struct completion thread_complete;
-
-	/* This is for thread to wait for interrupts */
-	cy_as_hal_sleep_channel thread_sc;
-
-	/* This is for thread to exit upon StopOmapKernel */
-	int thread_flag; /* set 1 to exit */
-
-	int dma_ch;
-
-	/* This is for dma sync */
-	struct completion dma_complete;
-} cy_as_omap_dev_kernel;
-
-#endif
-
-/*[]*/
diff --git a/drivers/staging/westbridge/astoria/block/Kconfig b/drivers/staging/westbridge/astoria/block/Kconfig
deleted file mode 100644
index 851bf96a7b87..000000000000
--- a/drivers/staging/westbridge/astoria/block/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# West Bridge block driver configuration
-#
-
-config WESTBRIDGE_BLOCK_DRIVER
-	tristate "West Bridge Block Driver"
-	help
-		Include the West Bridge based block driver
-
diff --git a/drivers/staging/westbridge/astoria/block/Makefile b/drivers/staging/westbridge/astoria/block/Makefile
deleted file mode 100644
index 4a45dd0861e7..000000000000
--- a/drivers/staging/westbridge/astoria/block/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the kernel westbridge block driver
-#
-
-ifneq ($(CONFIG_WESTBRIDGE_DEBUG),y)
-	EXTRA_CFLAGS		+= -DWESTBRIDGE_NDEBUG
-endif
-
-obj-$(CONFIG_WESTBRIDGE_BLOCK_DRIVER)  += cyasblkdev.o
-cyasblkdev-y		:= cyasblkdev_block.o cyasblkdev_queue.o
-
diff --git a/drivers/staging/westbridge/astoria/block/cyasblkdev_block.c b/drivers/staging/westbridge/astoria/block/cyasblkdev_block.c
deleted file mode 100644
index 87452bde7c93..000000000000
--- a/drivers/staging/westbridge/astoria/block/cyasblkdev_block.c
+++ /dev/null
@@ -1,1631 +0,0 @@
-/* cyanblkdev_block.c - West Bridge Linux Block Driver source file
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-/*
- * Linux block driver implementation for Cypress West Bridge.
- * Based on the mmc block driver implementation by Andrew Christian
- * for the linux 2.6.26 kernel.
- * mmc_block.c, 5/28/2002
- */
-
-/*
- * Block driver for media (i.e., flash cards)
- *
- * Copyright 2002 Hewlett-Packard Company
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Many thanks to Alessandro Rubini and Jonathan Corbet!
- *
- * Author:  Andrew Christian
- *		  28 May 2002
- */
-
-#include <linux/moduleparam.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/hdreg.h>
-#include <linux/kdev_t.h>
-#include <linux/blkdev.h>
-
-#include <asm/system.h>
-#include <linux/uaccess.h>
-
-#include <linux/scatterlist.h>
-#include <linux/time.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
-
-#include "cyasblkdev_queue.h"
-
-#define CYASBLKDEV_SHIFT	0 /* Only a single partition. */
-#define CYASBLKDEV_MAX_REQ_LEN	(256)
-#define CYASBLKDEV_NUM_MINORS	(256 >> CYASBLKDEV_SHIFT)
-#define CY_AS_TEST_NUM_BLOCKS   (64)
-#define CYASBLKDEV_MINOR_0 1
-#define CYASBLKDEV_MINOR_1 2
-#define CYASBLKDEV_MINOR_2 3
-
-static int major;
-module_param(major, int, 0444);
-MODULE_PARM_DESC(major,
-	"specify the major device number for cyasblkdev block driver");
-
-/* parameters passed from the user space */
-static int vfat_search;
-module_param(vfat_search, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(vfat_search,
-	"dynamically find the location of the first sector");
-
-static int private_partition_bus = -1;
-module_param(private_partition_bus, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(private_partition_bus,
-	"bus number for private partition");
-
-static int private_partition_size = -1;
-module_param(private_partition_size, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(private_partition_size,
-	"size of the private partition");
-
-/*
- * There is one cyasblkdev_blk_data per slot.
- */
-struct cyasblkdev_blk_data {
-	spinlock_t	  lock;
-	int media_count[2];
-	const struct block_device_operations *blkops;
-	unsigned int	usage;
-	unsigned int	suspended;
-
-	/* handle to the west bridge device this handle, typdefed as *void  */
-	cy_as_device_handle		dev_handle;
-
-	/* our custom structure, in addition to request queue,
-	 * adds lock & semaphore items*/
-	struct cyasblkdev_queue queue;
-
-	/* 16 entries is enough given max request size
-	 * 16 * 4K (64 K per request)*/
-	struct scatterlist	  sg[16];
-
-	/* non-zero enables printk of executed reqests */
-	unsigned int	dbgprn_flags;
-
-	/*gen_disk for private, system disk */
-	struct gendisk  *system_disk;
-	cy_as_media_type   system_disk_type;
-	cy_bool			 system_disk_read_only;
-	cy_bool			 system_disk_bus_num;
-
-	/* sector size for the medium */
-	unsigned int	system_disk_blk_size;
-	unsigned int	system_disk_first_sector;
-	unsigned int	system_disk_unit_no;
-
-	/*gen_disk for bus 0 */
-	struct gendisk  *user_disk_0;
-	cy_as_media_type   user_disk_0_type;
-	cy_bool			 user_disk_0_read_only;
-	cy_bool			 user_disk_0_bus_num;
-
-	/* sector size for the medium */
-	unsigned int	user_disk_0_blk_size;
-	unsigned int	user_disk_0_first_sector;
-	unsigned int	user_disk_0_unit_no;
-
-	/*gen_disk for bus 1 */
-	struct gendisk  *user_disk_1;
-	cy_as_media_type   user_disk_1_type;
-	cy_bool			 user_disk_1_read_only;
-	cy_bool			 user_disk_1_bus_num;
-
-	/* sector size for the medium */
-	unsigned int	user_disk_1_blk_size;
-	unsigned int	user_disk_1_first_sector;
-	unsigned int	user_disk_1_unit_no;
-};
-
-/* pointer to west bridge block data device superstructure */
-static struct cyasblkdev_blk_data *gl_bd;
-
-static DEFINE_SEMAPHORE(open_lock);
-
-/* local forwardd declarationss  */
-static cy_as_device_handle *cyas_dev_handle;
-static void cyasblkdev_blk_deinit(struct cyasblkdev_blk_data *bd);
-
-/*change debug print options */
- #define DBGPRN_RD_RQ	   (1 < 0)
- #define DBGPRN_WR_RQ		(1 < 1)
- #define DBGPRN_RQ_END	  (1 < 2)
-
-int blkdev_ctl_dbgprn(
-						int prn_flags
-						)
-{
-	int cur_options = gl_bd->dbgprn_flags;
-
-	DBGPRN_FUNC_NAME;
-
-	/* set new debug print options */
-	gl_bd->dbgprn_flags = prn_flags;
-
-	/* return previous */
-	return cur_options;
-}
-EXPORT_SYMBOL(blkdev_ctl_dbgprn);
-
-static struct cyasblkdev_blk_data *cyasblkdev_blk_get(
-							struct gendisk *disk
-							)
-{
-	struct cyasblkdev_blk_data *bd;
-
-	DBGPRN_FUNC_NAME;
-
-	down(&open_lock);
-
-	bd = disk->private_data;
-
-	if (bd && (bd->usage == 0))
-		bd = NULL;
-
-	if (bd) {
-		bd->usage++;
-		#ifndef NBDEBUG
-		cy_as_hal_print_message(
-			"cyasblkdev_blk_get: usage = %d\n", bd->usage);
-		#endif
-	}
-	up(&open_lock);
-
-	return bd;
-}
-
-static void cyasblkdev_blk_put(
-			struct cyasblkdev_blk_data *bd
-			)
-{
-	DBGPRN_FUNC_NAME;
-
-	down(&open_lock);
-
-	if (bd) {
-		bd->usage--;
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			" cyasblkdev_blk_put , bd->usage= %d\n", bd->usage);
-		#endif
-	} else  {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"cyasblkdev: blk_put(bd) on bd = NULL!: usage = %d\n",
-			bd->usage);
-		#endif
-		up(&open_lock);
-		return;
-	}
-
-	if (bd->usage == 0) {
-		put_disk(bd->user_disk_0);
-		put_disk(bd->user_disk_1);
-		put_disk(bd->system_disk);
-		cyasblkdev_cleanup_queue(&bd->queue);
-
-		if (CY_AS_ERROR_SUCCESS !=
-			cy_as_storage_release(bd->dev_handle, 0, 0, 0, 0)) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-				"cyasblkdev: cannot release bus 0\n");
-			#endif
-		}
-
-		if (CY_AS_ERROR_SUCCESS !=
-			cy_as_storage_release(bd->dev_handle, 1, 0, 0, 0)) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-				"cyasblkdev: cannot release bus 1\n");
-			#endif
-		}
-
-		if (CY_AS_ERROR_SUCCESS !=
-			cy_as_storage_stop(bd->dev_handle, 0, 0)) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-				"cyasblkdev: cannot stop storage stack\n");
-			#endif
-		}
-
-	#ifdef __CY_ASTORIA_SCM_KERNEL_HAL__
-		/* If the SCM Kernel HAL is being used, disable the use
-		 * of scatter/gather lists at the end of block driver usage.
-		 */
-		cy_as_hal_disable_scatter_list(cyasdevice_gethaltag());
-	#endif
-
-		/*ptr to global struct cyasblkdev_blk_data */
-		gl_bd = NULL;
-		kfree(bd);
-	}
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message(
-		"cyasblkdev (blk_put): usage = %d\n",
-		bd->usage);
-	#endif
-	up(&open_lock);
-}
-
-static int cyasblkdev_blk_open(
-					struct block_device *bdev,
-					fmode_t mode
-					)
-{
-	struct cyasblkdev_blk_data *bd = cyasblkdev_blk_get(bdev->bd_disk);
-	int ret = -ENXIO;
-
-	DBGPRN_FUNC_NAME;
-
-	if (bd) {
-		if (bd->usage == 2)
-			check_disk_change(bdev);
-
-		ret = 0;
-
-		if (bdev->bd_disk == bd->user_disk_0) {
-			if ((mode & FMODE_WRITE) && bd->user_disk_0_read_only) {
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-					"device marked as readonly "
-					"and write requested\n");
-				#endif
-
-				cyasblkdev_blk_put(bd);
-				ret = -EROFS;
-			}
-		} else if (bdev->bd_disk == bd->user_disk_1) {
-			if ((mode & FMODE_WRITE) && bd->user_disk_1_read_only) {
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-					"device marked as readonly "
-					"and write requested\n");
-				#endif
-
-				cyasblkdev_blk_put(bd);
-				ret = -EROFS;
-			}
-		} else if (bdev->bd_disk == bd->system_disk) {
-			if ((mode & FMODE_WRITE) && bd->system_disk_read_only) {
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-					"device marked as readonly "
-					"and write requested\n");
-				#endif
-
-				cyasblkdev_blk_put(bd);
-				ret = -EROFS;
-			}
-		}
-	}
-
-	return ret;
-}
-
-static int cyasblkdev_blk_release(
-					struct gendisk *disk,
-					fmode_t mode
-					)
-{
-	struct cyasblkdev_blk_data *bd = disk->private_data;
-
-	DBGPRN_FUNC_NAME;
-
-	cyasblkdev_blk_put(bd);
-	return 0;
-}
-
-static int cyasblkdev_blk_ioctl(
-			struct block_device *bdev,
-			fmode_t mode,
-			unsigned int cmd,
-			unsigned long arg
-			)
-{
-	DBGPRN_FUNC_NAME;
-
-	if (cmd == HDIO_GETGEO) {
-		/*for now  we only process geometry IOCTL*/
-		struct hd_geometry geo;
-
-		memset(&geo, 0, sizeof(struct hd_geometry));
-
-		geo.cylinders	= get_capacity(bdev->bd_disk) / (4 * 16);
-		geo.heads	= 4;
-		geo.sectors	= 16;
-		geo.start	= get_start_sect(bdev);
-
-		/* copy to user space */
-		return copy_to_user((void __user *)arg, &geo, sizeof(geo))
-			? -EFAULT : 0;
-	}
-
-	return -ENOTTY;
-}
-
-/* check_events block_device opp
- * this one is called by kernel to confirm if the media really changed
- * as we indicated by issuing check_disk_change() call */
-unsigned int cyasblkdev_check_events(struct gendisk *gd, unsigned int clearing)
-{
-	struct cyasblkdev_blk_data *bd;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("cyasblkdev_media_changed() is called\n");
-	#endif
-
-	if (gd)
-		bd = gd->private_data;
-	else {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"cyasblkdev_media_changed() is called, "
-			"but gd is null\n");
-		#endif
-	}
-
-	/* return media change state - DISK_EVENT_MEDIA_CHANGE yes, 0 no */
-	return 0;
-}
-
-/*  this one called by kernel to give us a chence
- * to prep the new media before it starts to rescaning
- * of the newlly inserted SD media */
-int cyasblkdev_revalidate_disk(struct gendisk *gd)
-{
-	/*int (*revalidate_disk) (struct gendisk *); */
-
-	#ifndef WESTBRIDGE_NDEBUG
-	if (gd)
-		cy_as_hal_print_message(
-			"cyasblkdev_revalidate_disk() is called, "
-			"(gl_bd->usage:%d)\n", gl_bd->usage);
-	#endif
-
-	/* 0 means ok, kern can go ahead with partition rescan */
-	return 0;
-}
-
-
-/*standard block device driver interface */
-static struct block_device_operations cyasblkdev_bdops = {
-	.open			= cyasblkdev_blk_open,
-	.release		= cyasblkdev_blk_release,
-	.ioctl			= cyasblkdev_blk_ioctl,
-	/* .getgeo		= cyasblkdev_blk_getgeo, */
-	/* added to support media removal( real and simulated) media */
-	.check_events		= cyasblkdev_check_events,
-	/* added to support media removal( real and simulated) media */
-	.revalidate_disk = cyasblkdev_revalidate_disk,
-	.owner			= THIS_MODULE,
-};
-
-/* west bridge block device prep request function */
-static int cyasblkdev_blk_prep_rq(
-					struct cyasblkdev_queue *bq,
-					struct request *req
-					)
-{
-	struct cyasblkdev_blk_data *bd = bq->data;
-	int stat = BLKPREP_OK;
-
-	DBGPRN_FUNC_NAME;
-
-	/* If we have no device, we haven't finished initialising. */
-	if (!bd || !bd->dev_handle) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(KERN_ERR
-			"cyasblkdev %s: killing request - no device/host\n",
-			req->rq_disk->disk_name);
-		#endif
-		stat = BLKPREP_KILL;
-	}
-
-	if (bd->suspended) {
-		blk_plug_device(bd->queue.queue);
-		stat = BLKPREP_DEFER;
-	}
-
-	/* Check for excessive requests.*/
-	if (blk_rq_pos(req) + blk_rq_sectors(req) > get_capacity(req->rq_disk)) {
-		cy_as_hal_print_message("cyasblkdev: bad request address\n");
-		stat = BLKPREP_KILL;
-	}
-
-	return stat;
-}
-
-/*west bridge storage async api on_completed callback */
-static void cyasblkdev_issuecallback(
-	/* Handle to the device completing the storage operation */
-	cy_as_device_handle handle,
-	/* The media type completing the operation */
-	cy_as_media_type type,
-	/* The device completing the operation */
-	uint32_t device,
-	/* The unit completing the operation */
-	uint32_t unit,
-	/* The block number of the completed operation */
-	uint32_t block_number,
-	/* The type of operation */
-	cy_as_oper_type op,
-	/* The error status */
-	cy_as_return_status_t status
-	)
-{
-	int retry_cnt = 0;
-	DBGPRN_FUNC_NAME;
-
-	if (status != CY_AS_ERROR_SUCCESS) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-		  "%s: async r/w: op:%d failed with error %d at address %d\n",
-			__func__, op, status, block_number);
-		#endif
-	}
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message(
-		"%s calling blk_end_request from issue_callback "
-		"req=0x%x, status=0x%x, nr_sectors=0x%x\n",
-		__func__, (unsigned int) gl_bd->queue.req, status,
-		(unsigned int) blk_rq_sectors(gl_bd->queue.req));
-	#endif
-
-	/* note: blk_end_request w/o __ prefix should
-	 * not require spinlocks on the queue*/
-	while (blk_end_request(gl_bd->queue.req,
-	status, blk_rq_sectors(gl_bd->queue.req)*512)) {
-		retry_cnt++;
-	}
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message(
-		"%s blkdev_callback: ended rq on %d sectors, "
-		"with err:%d, n:%d times\n", __func__,
-		(int)blk_rq_sectors(gl_bd->queue.req), status,
-		retry_cnt
-	);
-	#endif
-
-	spin_lock_irq(&gl_bd->lock);
-
-	/*elevate next request, if there is one*/
-	if (!blk_queue_plugged(gl_bd->queue.queue)) {
-		/* queue is not plugged */
-		gl_bd->queue.req = blk_fetch_request(gl_bd->queue.queue);
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s blkdev_callback: "
-		"blk_fetch_request():%p\n",
-			__func__, gl_bd->queue.req);
-		#endif
-	}
-
-	if (gl_bd->queue.req) {
-		spin_unlock_irq(&gl_bd->lock);
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s blkdev_callback: about to "
-		"call issue_fn:%p\n", __func__, gl_bd->queue.req);
-		#endif
-
-		gl_bd->queue.issue_fn(&gl_bd->queue, gl_bd->queue.req);
-	} else {
-		spin_unlock_irq(&gl_bd->lock);
-	}
-}
-
-/* issue astoria blkdev request (issue_fn) */
-static int cyasblkdev_blk_issue_rq(
-					struct cyasblkdev_queue *bq,
-					struct request *req
-					)
-{
-	struct cyasblkdev_blk_data *bd = bq->data;
-	int index = 0;
-	int ret = CY_AS_ERROR_SUCCESS;
-	uint32_t req_sector = 0;
-	uint32_t req_nr_sectors = 0;
-	int bus_num = 0;
-	int lcl_unit_no = 0;
-
-	DBGPRN_FUNC_NAME;
-
-	/*
-	 * will construct a scatterlist for the given request;
-	 * the return value is the number of actually used
-	 * entries in the resulting list. Then, this scatterlist
-	 * can be used for the actual DMA prep operation.
-	 */
-	spin_lock_irq(&bd->lock);
-	index = blk_rq_map_sg(bq->queue, req, bd->sg);
-
-	if (req->rq_disk == bd->user_disk_0) {
-		bus_num = bd->user_disk_0_bus_num;
-		req_sector = blk_rq_pos(req) + gl_bd->user_disk_0_first_sector;
-		req_nr_sectors = blk_rq_sectors(req);
-		lcl_unit_no = gl_bd->user_disk_0_unit_no;
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: request made to disk 0 "
-			"for sector=%d, num_sectors=%d, unit_no=%d\n",
-			__func__, req_sector, (int) blk_rq_sectors(req),
-			lcl_unit_no);
-		#endif
-	} else if (req->rq_disk == bd->user_disk_1) {
-		bus_num = bd->user_disk_1_bus_num;
-		req_sector = blk_rq_pos(req) + gl_bd->user_disk_1_first_sector;
-		/*SECT_NUM_TRANSLATE(blk_rq_sectors(req));*/
-		req_nr_sectors = blk_rq_sectors(req);
-		lcl_unit_no = gl_bd->user_disk_1_unit_no;
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: request made to disk 1 for "
-			"sector=%d, num_sectors=%d, unit_no=%d\n", __func__,
-			req_sector, (int) blk_rq_sectors(req), lcl_unit_no);
-		#endif
-	} else if (req->rq_disk == bd->system_disk) {
-		bus_num = bd->system_disk_bus_num;
-		req_sector = blk_rq_pos(req) + gl_bd->system_disk_first_sector;
-		req_nr_sectors = blk_rq_sectors(req);
-		lcl_unit_no = gl_bd->system_disk_unit_no;
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: request made to system disk "
-			"for sector=%d, num_sectors=%d, unit_no=%d\n", __func__,
-			req_sector, (int) blk_rq_sectors(req), lcl_unit_no);
-		#endif
-	}
-	#ifndef WESTBRIDGE_NDEBUG
-	else {
-		cy_as_hal_print_message(
-			"%s: invalid disk used for request\n", __func__);
-	}
-	#endif
-
-	spin_unlock_irq(&bd->lock);
-
-	if (rq_data_dir(req) == READ) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: calling readasync() "
-			"req_sector=0x%x, req_nr_sectors=0x%x, bd->sg:%x\n\n",
-			__func__, req_sector, req_nr_sectors, (uint32_t)bd->sg);
-		#endif
-
-		ret = cy_as_storage_read_async(bd->dev_handle, bus_num, 0,
-			lcl_unit_no, req_sector, bd->sg, req_nr_sectors,
-			(cy_as_storage_callback)cyasblkdev_issuecallback);
-
-		if (ret != CY_AS_ERROR_SUCCESS) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("%s:readasync() error %d at "
-				"address %ld, unit no %d\n", __func__, ret,
-				blk_rq_pos(req), lcl_unit_no);
-			cy_as_hal_print_message("%s:ending i/o request "
-				"on reg:%x\n", __func__, (uint32_t)req);
-			#endif
-
-			while (blk_end_request(req,
-				(ret == CY_AS_ERROR_SUCCESS),
-				req_nr_sectors*512))
-				;
-
-			bq->req = NULL;
-		}
-	} else {
-		ret = cy_as_storage_write_async(bd->dev_handle, bus_num, 0,
-			lcl_unit_no, req_sector, bd->sg, req_nr_sectors,
-			(cy_as_storage_callback)cyasblkdev_issuecallback);
-
-		if (ret != CY_AS_ERROR_SUCCESS) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("%s: write failed with "
-			"error %d at address %ld, unit no %d\n",
-			__func__, ret, blk_rq_pos(req), lcl_unit_no);
-			#endif
-
-			/*end IO op on this request(does both
-			 * end_that_request_... _first & _last) */
-			while (blk_end_request(req,
-				(ret == CY_AS_ERROR_SUCCESS),
-				req_nr_sectors*512))
-				;
-
-			bq->req = NULL;
-		}
-	}
-
-	return ret;
-}
-
-static unsigned long
-dev_use[CYASBLKDEV_NUM_MINORS / (8 * sizeof(unsigned long))];
-
-
-/* storage event callback (note: called in astoria isr context) */
-static void cyasblkdev_storage_callback(
-					cy_as_device_handle dev_h,
-					cy_as_bus_number_t bus,
-					uint32_t device,
-					cy_as_storage_event evtype,
-					void *evdata
-					)
-{
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("%s: bus:%d, device:%d, evtype:%d, "
-	"evdata:%p\n ", __func__, bus, device, evtype, evdata);
-	#endif
-
-	switch (evtype) {
-	case cy_as_storage_processor:
-		break;
-
-	case cy_as_storage_removed:
-		break;
-
-	case cy_as_storage_inserted:
-		break;
-
-	default:
-		break;
-	}
-}
-
-#define SECTORS_TO_SCAN 4096
-
-uint32_t cyasblkdev_get_vfat_offset(int bus_num, int unit_no)
-{
-	/*
-	 * for sd media, vfat partition boot record is not always
-	 * located at sector it greatly depends on the system and
-	 * software that was used to format the sd however, linux
-	 * fs layer always expects it at sector 0, this function
-	 * finds the offset and then uses it in all media r/w
-	 * operations
-	 */
-	int sect_no, stat;
-	uint8_t *sect_buf;
-	bool br_found = false;
-
-	DBGPRN_FUNC_NAME;
-
-	sect_buf = kmalloc(1024, GFP_KERNEL);
-
-	/* since HAL layer always uses sg lists instead of the
-	 * buffer (for hw dmas) we need to initialize the sg list
-	 * for local buffer*/
-	sg_init_one(gl_bd->sg, sect_buf, 512);
-
-	/*
-	* Check MPR partition table 1st, then try to scan through
-	* 1st 384 sectors until BR signature(intel JMP istruction
-	* code and ,0x55AA) is found
-	*/
-	#ifndef WESTBRIDGE_NDEBUG
-	  cy_as_hal_print_message(
-		"%s scanning media for vfat partition...\n", __func__);
-	#endif
-
-	for (sect_no = 0; sect_no < SECTORS_TO_SCAN; sect_no++) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s before cyasstorageread "
-			"gl_bd->sg addr=0x%x\n", __func__,
-			(unsigned int) gl_bd->sg);
-		#endif
-
-		stat = cy_as_storage_read(
-			/* Handle to the device of interest */
-			gl_bd->dev_handle,
-			/* The bus to access */
-			bus_num,
-			/* The device to access */
-			0,
-			/* The unit to access */
-			unit_no,
-			/* absolute sector number */
-			sect_no,
-			/* sg structure */
-			gl_bd->sg,
-			/* The number of blocks to be read */
-			1
-		);
-
-		/* try only sectors with boot signature */
-		if ((sect_buf[510] == 0x55) && (sect_buf[511] == 0xaa)) {
-			/* vfat boot record may also be located at
-			 * sector 0, check it first  */
-			if (sect_buf[0] == 0xEB) {
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-					"%s vfat partition found "
-					"at sector:%d\n",
-					__func__, sect_no);
-				#endif
-
-				br_found = true;
-				   break;
-			}
-		}
-
-		if (stat != 0) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("%s sector scan error\n",
-				__func__);
-			#endif
-			break;
-		}
-	}
-
-	kfree(sect_buf);
-
-	if (br_found) {
-		return sect_no;
-	} else {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"%s vfat partition is not found, using 0 offset\n",
-			__func__);
-		#endif
-		return 0;
-	}
-}
-
-cy_as_storage_query_device_data dev_data = {0};
-
-static int cyasblkdev_add_disks(int bus_num,
-	struct cyasblkdev_blk_data *bd,
-	int total_media_count,
-	int devidx)
-{
-	int ret = 0;
-	uint64_t disk_cap;
-	int lcl_unit_no;
-	cy_as_storage_query_unit_data unit_data = {0};
-
-	#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s:query device: "
-		"type:%d, removable:%d, writable:%d, "
-		"blksize %d, units:%d, locked:%d, "
-		"erase_sz:%d\n",
-		__func__,
-		dev_data.desc_p.type,
-		dev_data.desc_p.removable,
-		dev_data.desc_p.writeable,
-		dev_data.desc_p.block_size,
-		dev_data.desc_p.number_units,
-		dev_data.desc_p.locked,
-		dev_data.desc_p.erase_unit_size
-		);
-	#endif
-
-	/*  make sure that device is not locked  */
-	if (dev_data.desc_p.locked) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"%s: device is locked\n", __func__);
-		#endif
-		ret = cy_as_storage_release(
-			bd->dev_handle, bus_num, 0, 0, 0);
-		if (ret != CY_AS_ERROR_SUCCESS) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("%s cannot release"
-				" storage\n", __func__);
-			#endif
-			goto out;
-		}
-		goto out;
-	}
-
-	unit_data.device = 0;
-	unit_data.unit   = 0;
-	unit_data.bus    = bus_num;
-	ret = cy_as_storage_query_unit(bd->dev_handle,
-		&unit_data, 0, 0);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: cannot query "
-			"%d device unit - reason code %d\n",
-			__func__, bus_num, ret);
-		#endif
-		goto out;
-	}
-
-	if (private_partition_bus == bus_num) {
-		if (private_partition_size > 0) {
-			ret = cy_as_storage_create_p_partition(
-				bd->dev_handle, bus_num, 0,
-				private_partition_size, 0, 0);
-			if ((ret != CY_AS_ERROR_SUCCESS) &&
-			(ret != CY_AS_ERROR_ALREADY_PARTITIONED)) {
-			#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message("%s: cy_as_storage_"
-				"create_p_partition after size > 0 check "
-				"failed with error code %d\n",
-				__func__, ret);
-			#endif
-
-				disk_cap = (uint64_t)
-					(unit_data.desc_p.unit_size);
-				lcl_unit_no = 0;
-
-			} else if (ret == CY_AS_ERROR_ALREADY_PARTITIONED) {
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-				"%s: cy_as_storage_create_p_partition "
-				"indicates memory already partitioned\n",
-				__func__);
-				#endif
-
-				/*check to see that partition
-				 * matches size */
-				if (unit_data.desc_p.unit_size !=
-					private_partition_size) {
-					ret = cy_as_storage_remove_p_partition(
-						bd->dev_handle,
-						bus_num, 0, 0, 0);
-					if (ret == CY_AS_ERROR_SUCCESS) {
-						ret = cy_as_storage_create_p_partition(
-							bd->dev_handle, bus_num, 0,
-							private_partition_size, 0, 0);
-						if (ret == CY_AS_ERROR_SUCCESS) {
-							unit_data.bus = bus_num;
-							unit_data.device = 0;
-							unit_data.unit = 1;
-						} else {
-							#ifndef WESTBRIDGE_NDEBUG
-							cy_as_hal_print_message(
-							"%s: cy_as_storage_create_p_partition "
-							"after removal unexpectedly failed "
-							"with error %d\n", __func__, ret);
-							#endif
-
-							/* need to requery bus
-							 * seeing as delete
-							 * successful and create
-							 * failed we have changed
-							 * the disk properties */
-							unit_data.bus	= bus_num;
-							unit_data.device = 0;
-							unit_data.unit   = 0;
-						}
-
-						ret = cy_as_storage_query_unit(
-						bd->dev_handle,
-						&unit_data, 0, 0);
-						if (ret != CY_AS_ERROR_SUCCESS) {
-							#ifndef WESTBRIDGE_NDEBUG
-							cy_as_hal_print_message(
-							"%s: cannot query %d "
-							"device unit - reason code %d\n",
-							__func__, bus_num, ret);
-							#endif
-							goto out;
-						} else {
-							disk_cap = (uint64_t)
-								(unit_data.desc_p.unit_size);
-							lcl_unit_no =
-								unit_data.unit;
-						}
-					} else {
-					#ifndef WESTBRIDGE_NDEBUG
-					cy_as_hal_print_message(
-					"%s: cy_as_storage_remove_p_partition "
-					"failed with error %d\n",
-					__func__, ret);
-					#endif
-
-						unit_data.bus = bus_num;
-						unit_data.device = 0;
-						unit_data.unit = 1;
-
-						ret = cy_as_storage_query_unit(
-							bd->dev_handle, &unit_data, 0, 0);
-						if (ret != CY_AS_ERROR_SUCCESS) {
-						#ifndef WESTBRIDGE_NDEBUG
-							cy_as_hal_print_message(
-							"%s: cannot query %d "
-							"device unit - reason "
-							"code %d\n", __func__,
-							bus_num, ret);
-						#endif
-							goto out;
-						}
-
-						disk_cap = (uint64_t)
-							(unit_data.desc_p.unit_size);
-						lcl_unit_no =
-							unit_data.unit;
-					}
-				} else {
-					#ifndef WESTBRIDGE_NDEBUG
-					cy_as_hal_print_message("%s: partition "
-						"exists and sizes equal\n",
-						__func__);
-					#endif
-
-					/*partition already existed,
-					 * need to query second unit*/
-					unit_data.bus = bus_num;
-					unit_data.device = 0;
-					unit_data.unit = 1;
-
-					ret = cy_as_storage_query_unit(
-						bd->dev_handle, &unit_data, 0, 0);
-					if (ret != CY_AS_ERROR_SUCCESS) {
-					#ifndef WESTBRIDGE_NDEBUG
-						cy_as_hal_print_message(
-							"%s: cannot query %d "
-							"device unit "
-							"- reason code %d\n",
-							__func__, bus_num, ret);
-					#endif
-						goto out;
-					} else {
-						disk_cap = (uint64_t)
-						(unit_data.desc_p.unit_size);
-						lcl_unit_no = unit_data.unit;
-					}
-				}
-			} else {
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-				"%s: cy_as_storage_create_p_partition "
-				"created successfully\n", __func__);
-				#endif
-
-				disk_cap = (uint64_t)
-				(unit_data.desc_p.unit_size -
-				private_partition_size);
-
-				lcl_unit_no = 1;
-			}
-		}
-		#ifndef WESTBRIDGE_NDEBUG
-		else {
-			cy_as_hal_print_message(
-			"%s: invalid partition_size%d\n", __func__,
-			private_partition_size);
-
-			disk_cap = (uint64_t)
-				(unit_data.desc_p.unit_size);
-			lcl_unit_no = 0;
-		}
-		#endif
-	} else {
-		disk_cap = (uint64_t)
-			(unit_data.desc_p.unit_size);
-		lcl_unit_no = 0;
-	}
-
-	if ((bus_num == 0) ||
-		(total_media_count == 1)) {
-		sprintf(bd->user_disk_0->disk_name,
-			"cyasblkdevblk%d", devidx);
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"%s: disk unit_sz:%lu blk_sz:%d, "
-			"start_blk:%lu, capacity:%llu\n",
-			__func__, (unsigned long)
-			unit_data.desc_p.unit_size,
-			unit_data.desc_p.block_size,
-			(unsigned long)
-			unit_data.desc_p.start_block,
-			(uint64_t)disk_cap
-		);
-		#endif
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: setting gendisk disk "
-			"capacity to %d\n", __func__, (int) disk_cap);
-		#endif
-
-		/* initializing bd->queue */
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: init bd->queue\n",
-			__func__);
-		#endif
-
-		/* this will create a
-		 * queue kernel thread */
-		cyasblkdev_init_queue(
-			&bd->queue, &bd->lock);
-
-		bd->queue.prep_fn = cyasblkdev_blk_prep_rq;
-		bd->queue.issue_fn = cyasblkdev_blk_issue_rq;
-		bd->queue.data = bd;
-
-		/*blk_size should always
-		 * be a multiple of 512,
-		 * set to the max to ensure
-		 * that all accesses aligned
-		 * to the greatest multiple,
-		 * can adjust request to
-		 * smaller block sizes
-		 * dynamically*/
-
-		bd->user_disk_0_read_only = !dev_data.desc_p.writeable;
-		bd->user_disk_0_blk_size = dev_data.desc_p.block_size;
-		bd->user_disk_0_type = dev_data.desc_p.type;
-		bd->user_disk_0_bus_num = bus_num;
-		bd->user_disk_0->major = major;
-		bd->user_disk_0->first_minor = devidx << CYASBLKDEV_SHIFT;
-		bd->user_disk_0->minors = 8;
-		bd->user_disk_0->fops = &cyasblkdev_bdops;
-		bd->user_disk_0->events = DISK_EVENT_MEDIA_CHANGE;
-		bd->user_disk_0->private_data = bd;
-		bd->user_disk_0->queue = bd->queue.queue;
-		bd->dbgprn_flags = DBGPRN_RD_RQ;
-		bd->user_disk_0_unit_no = lcl_unit_no;
-
-		blk_queue_logical_block_size(bd->queue.queue,
-			bd->user_disk_0_blk_size);
-
-		set_capacity(bd->user_disk_0,
-			disk_cap);
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"%s: returned from set_capacity %d\n",
-			__func__, (int) disk_cap);
-		#endif
-
-		/* need to start search from
-		 * public partition beginning */
-		if (vfat_search) {
-			bd->user_disk_0_first_sector =
-				cyasblkdev_get_vfat_offset(
-					bd->user_disk_0_bus_num,
-					bd->user_disk_0_unit_no);
-		} else {
-			bd->user_disk_0_first_sector = 0;
-		}
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"%s: set user_disk_0_first "
-			"sector to %d\n", __func__,
-			 bd->user_disk_0_first_sector);
-		cy_as_hal_print_message(
-			"%s: add_disk: disk->major=0x%x\n",
-			__func__,
-			bd->user_disk_0->major);
-		cy_as_hal_print_message(
-			"%s: add_disk: "
-			"disk->first_minor=0x%x\n", __func__,
-			bd->user_disk_0->first_minor);
-		cy_as_hal_print_message(
-			"%s: add_disk: "
-			"disk->minors=0x%x\n", __func__,
-			bd->user_disk_0->minors);
-		cy_as_hal_print_message(
-			"%s: add_disk: "
-			"disk->disk_name=%s\n",
-			__func__,
-			bd->user_disk_0->disk_name);
-		cy_as_hal_print_message(
-			"%s: add_disk: "
-			"disk->part_tbl=0x%x\n", __func__,
-			(unsigned int)
-			bd->user_disk_0->part_tbl);
-		cy_as_hal_print_message(
-			"%s: add_disk: "
-			"disk->queue=0x%x\n", __func__,
-			(unsigned int)
-			bd->user_disk_0->queue);
-		cy_as_hal_print_message(
-			"%s: add_disk: "
-			"disk->flags=0x%x\n",
-			__func__, (unsigned int)
-			bd->user_disk_0->flags);
-		cy_as_hal_print_message(
-			"%s: add_disk: "
-			"disk->driverfs_dev=0x%x\n",
-			__func__, (unsigned int)
-			bd->user_disk_0->driverfs_dev);
-		cy_as_hal_print_message(
-			"%s: add_disk: "
-			"disk->slave_dir=0x%x\n",
-			__func__, (unsigned int)
-			bd->user_disk_0->slave_dir);
-		cy_as_hal_print_message(
-			"%s: add_disk: "
-			"disk->random=0x%x\n",
-			__func__, (unsigned int)
-			bd->user_disk_0->random);
-		cy_as_hal_print_message(
-			"%s: add_disk: "
-			"disk->node_id=0x%x\n",
-			__func__, (unsigned int)
-			bd->user_disk_0->node_id);
-
-		#endif
-
-		add_disk(bd->user_disk_0);
-
-	} else if ((bus_num == 1) &&
-		(total_media_count == 2)) {
-		bd->user_disk_1_read_only = !dev_data.desc_p.writeable;
-		bd->user_disk_1_blk_size = dev_data.desc_p.block_size;
-		bd->user_disk_1_type = dev_data.desc_p.type;
-		bd->user_disk_1_bus_num = bus_num;
-		bd->user_disk_1->major	= major;
-		bd->user_disk_1->first_minor = (devidx + 1) << CYASBLKDEV_SHIFT;
-		bd->user_disk_1->minors = 8;
-		bd->user_disk_1->fops = &cyasblkdev_bdops;
-		bd->user_disk_1->events = DISK_EVENT_MEDIA_CHANGE;
-		bd->user_disk_1->private_data = bd;
-		bd->user_disk_1->queue = bd->queue.queue;
-		bd->dbgprn_flags = DBGPRN_RD_RQ;
-		bd->user_disk_1_unit_no = lcl_unit_no;
-
-		sprintf(bd->user_disk_1->disk_name,
-			"cyasblkdevblk%d", (devidx + 1));
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"%s: disk unit_sz:%lu "
-			"blk_sz:%d, "
-			"start_blk:%lu, "
-			"capacity:%llu\n",
-			__func__,
-			(unsigned long)
-			unit_data.desc_p.unit_size,
-			unit_data.desc_p.block_size,
-			(unsigned long)
-			unit_data.desc_p.start_block,
-			(uint64_t)disk_cap
-		);
-		#endif
-
-		/*blk_size should always be a
-		 * multiple of 512, set to the max
-		 * to ensure that all accesses
-		 * aligned to the greatest multiple,
-		 * can adjust request to smaller
-		 * block sizes dynamically*/
-		if (bd->user_disk_0_blk_size >
-		bd->user_disk_1_blk_size) {
-			blk_queue_logical_block_size(bd->queue.queue,
-				bd->user_disk_0_blk_size);
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-			"%s: set hard sect_sz:%d\n",
-			__func__,
-			bd->user_disk_0_blk_size);
-			#endif
-		} else {
-			blk_queue_logical_block_size(bd->queue.queue,
-				bd->user_disk_1_blk_size);
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-			"%s: set hard sect_sz:%d\n",
-			__func__,
-			bd->user_disk_1_blk_size);
-			#endif
-		}
-
-		set_capacity(bd->user_disk_1, disk_cap);
-		if (vfat_search) {
-			bd->user_disk_1_first_sector =
-				cyasblkdev_get_vfat_offset(
-					bd->user_disk_1_bus_num,
-					bd->user_disk_1_unit_no);
-		} else {
-			bd->user_disk_1_first_sector
-				= 0;
-		}
-
-		add_disk(bd->user_disk_1);
-	}
-
-	if (lcl_unit_no > 0) {
-		if (bd->system_disk == NULL) {
-			bd->system_disk =
-				alloc_disk(8);
-
-			if (bd->system_disk == NULL) {
-				kfree(bd);
-				bd = ERR_PTR(-ENOMEM);
-				return bd;
-			}
-			disk_cap = (uint64_t)
-				(private_partition_size);
-
-			/* set properties of
-			 * system disk */
-			bd->system_disk_read_only = !dev_data.desc_p.writeable;
-			bd->system_disk_blk_size = dev_data.desc_p.block_size;
-			bd->system_disk_bus_num = bus_num;
-			bd->system_disk->major = major;
-			bd->system_disk->first_minor =
-				(devidx + 2) << CYASBLKDEV_SHIFT;
-			bd->system_disk->minors = 8;
-			bd->system_disk->fops = &cyasblkdev_bdops;
-			bd->system_disk->events = DISK_EVENT_MEDIA_CHANGE;
-			bd->system_disk->private_data = bd;
-			bd->system_disk->queue = bd->queue.queue;
-			/* don't search for vfat
-			 * with system disk */
-			bd->system_disk_first_sector = 0;
-			sprintf(
-				bd->system_disk->disk_name,
-				"cyasblkdevblk%d", (devidx + 2));
-
-			set_capacity(bd->system_disk,
-				disk_cap);
-
-			add_disk(bd->system_disk);
-		}
-		#ifndef WESTBRIDGE_NDEBUG
-		else {
-			cy_as_hal_print_message(
-				"%s: system disk already allocated %d\n",
-				__func__, bus_num);
-		}
-		#endif
-	}
-out:
-	return ret;
-}
-
-static struct cyasblkdev_blk_data *cyasblkdev_blk_alloc(void)
-{
-	struct cyasblkdev_blk_data *bd;
-	int ret = 0;
-	cy_as_return_status_t stat = -1;
-	int bus_num = 0;
-	int total_media_count = 0;
-	int devidx = 0;
-	DBGPRN_FUNC_NAME;
-
-	total_media_count = 0;
-	devidx = find_first_zero_bit(dev_use, CYASBLKDEV_NUM_MINORS);
-	if (devidx >= CYASBLKDEV_NUM_MINORS)
-		return ERR_PTR(-ENOSPC);
-
-	__set_bit(devidx, dev_use);
-	__set_bit(devidx + 1, dev_use);
-
-	bd = kzalloc(sizeof(struct cyasblkdev_blk_data), GFP_KERNEL);
-	if (bd) {
-		gl_bd = bd;
-
-		spin_lock_init(&bd->lock);
-		bd->usage = 1;
-
-		/* setup the block_dev_ops pointer*/
-		bd->blkops = &cyasblkdev_bdops;
-
-		/* Get the device handle */
-		bd->dev_handle = cyasdevice_getdevhandle();
-		if (0 == bd->dev_handle) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-				"%s: get device failed\n", __func__);
-			#endif
-			ret = ENODEV;
-			goto out;
-		}
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s west bridge device handle:%x\n",
-			__func__, (uint32_t)bd->dev_handle);
-		#endif
-
-		/* start the storage api and get a handle to the
-		 * device we are interested in. */
-
-		/* Error code to use if the conditions are not satisfied. */
-		ret = ENOMEDIUM;
-
-		stat = cy_as_misc_release_resource(bd->dev_handle, cy_as_bus_0);
-		if ((stat != CY_AS_ERROR_SUCCESS) &&
-		(stat != CY_AS_ERROR_RESOURCE_NOT_OWNED)) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("%s: cannot release "
-				"resource bus 0 - reason code %d\n",
-				__func__, stat);
-			#endif
-		}
-
-		stat = cy_as_misc_release_resource(bd->dev_handle, cy_as_bus_1);
-		if ((stat != CY_AS_ERROR_SUCCESS) &&
-		(stat != CY_AS_ERROR_RESOURCE_NOT_OWNED)) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("%s: cannot release "
-				"resource bus 0 - reason code %d\n",
-				__func__, stat);
-			#endif
-		}
-
-		/* start storage stack*/
-		stat = cy_as_storage_start(bd->dev_handle, 0, 0x101);
-		if (stat != CY_AS_ERROR_SUCCESS) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("%s: cannot start storage "
-				"stack - reason code %d\n", __func__, stat);
-			#endif
-			goto out;
-		}
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: storage started:%d ok\n",
-			__func__, stat);
-		#endif
-
-		stat = cy_as_storage_register_callback(bd->dev_handle,
-			cyasblkdev_storage_callback);
-		if (stat != CY_AS_ERROR_SUCCESS) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("%s: cannot register callback "
-				"- reason code %d\n", __func__, stat);
-			#endif
-			goto out;
-		}
-
-		for (bus_num = 0; bus_num < 2; bus_num++) {
-			stat = cy_as_storage_query_bus(bd->dev_handle,
-				bus_num, &bd->media_count[bus_num],  0, 0);
-			if (stat == CY_AS_ERROR_SUCCESS) {
-				total_media_count = total_media_count +
-					bd->media_count[bus_num];
-			} else {
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message("%s: cannot query %d, "
-					"reason code: %d\n",
-					__func__, bus_num, stat);
-				#endif
-				goto out;
-			}
-		}
-
-		if (total_media_count == 0) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-				"%s: no storage media was found\n", __func__);
-			#endif
-			goto out;
-		} else if (total_media_count >= 1) {
-			if (bd->user_disk_0 == NULL) {
-
-				bd->user_disk_0 =
-					alloc_disk(8);
-				if (bd->user_disk_0 == NULL) {
-					kfree(bd);
-					bd = ERR_PTR(-ENOMEM);
-					return bd;
-				}
-			}
-			#ifndef WESTBRIDGE_NDEBUG
-			else {
-				cy_as_hal_print_message("%s: no available "
-					"gen_disk for disk 0, "
-					"physically inconsistent\n", __func__);
-			}
-			#endif
-		}
-
-		if (total_media_count == 2) {
-			if (bd->user_disk_1 == NULL) {
-				bd->user_disk_1 =
-					alloc_disk(8);
-				if (bd->user_disk_1 == NULL) {
-					kfree(bd);
-					bd = ERR_PTR(-ENOMEM);
-					return bd;
-				}
-			}
-			#ifndef WESTBRIDGE_NDEBUG
-			else {
-				cy_as_hal_print_message("%s: no available "
-					"gen_disk for media, "
-					"physically inconsistent\n", __func__);
-			}
-			#endif
-		}
-		#ifndef WESTBRIDGE_NDEBUG
-		else if (total_media_count > 2) {
-			cy_as_hal_print_message("%s: count corrupted = 0x%d\n",
-				__func__, total_media_count);
-		}
-		#endif
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: %d device(s) found\n",
-			__func__, total_media_count);
-		#endif
-
-		for (bus_num = 0; bus_num <= 1; bus_num++) {
-			/*claim storage for cpu */
-			stat = cy_as_storage_claim(bd->dev_handle,
-				bus_num, 0, 0, 0);
-			if (stat != CY_AS_ERROR_SUCCESS) {
-				cy_as_hal_print_message("%s: cannot claim "
-					"%d bus - reason code %d\n",
-					__func__, bus_num, stat);
-				goto out;
-			}
-
-			dev_data.bus = bus_num;
-			dev_data.device = 0;
-
-			stat = cy_as_storage_query_device(bd->dev_handle,
-				&dev_data, 0, 0);
-			if (stat == CY_AS_ERROR_SUCCESS) {
-				cyasblkdev_add_disks(bus_num, bd,
-					total_media_count, devidx);
-			} else if (stat == CY_AS_ERROR_NO_SUCH_DEVICE) {
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-					"%s: no device on bus %d\n",
-					__func__, bus_num);
-				#endif
-			} else {
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-					"%s: cannot query %d device "
-					"- reason code %d\n",
-					__func__, bus_num, stat);
-				#endif
-				goto out;
-			}
-		} /* end for (bus_num = 0; bus_num <= 1; bus_num++)*/
-
-		return bd;
-	}
-out:
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message(
-		"%s: bd failed to initialize\n", __func__);
-	#endif
-
-	kfree(bd);
-	bd = ERR_PTR(-ret);
-	return bd;
-}
-
-
-/*init west bridge block device */
-static int cyasblkdev_blk_initialize(void)
-{
-	struct cyasblkdev_blk_data *bd;
-	int res;
-
-	DBGPRN_FUNC_NAME;
-
-	res = register_blkdev(major, "cyasblkdev");
-
-	if (res < 0) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(KERN_WARNING
-			"%s unable to get major %d for cyasblkdev media: %d\n",
-			__func__, major, res);
-		#endif
-		return res;
-	}
-
-	if (major == 0)
-		major = res;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message(
-		"%s cyasblkdev registered with major number: %d\n",
-		__func__, major);
-	#endif
-
-	bd = cyasblkdev_blk_alloc();
-	if (IS_ERR(bd))
-		return PTR_ERR(bd);
-
-	return 0;
-}
-
-/* start block device */
-static int __init cyasblkdev_blk_init(void)
-{
-	int res = -ENOMEM;
-
-	DBGPRN_FUNC_NAME;
-
-	/* get the cyasdev handle for future use*/
-	cyas_dev_handle = cyasdevice_getdevhandle();
-
-	if  (cyasblkdev_blk_initialize() == 0)
-		return 0;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("cyasblkdev init error:%d\n", res);
-	#endif
-	return res;
-}
-
-
-static void cyasblkdev_blk_deinit(struct cyasblkdev_blk_data *bd)
-{
-	DBGPRN_FUNC_NAME;
-
-	if (bd) {
-		int devidx;
-
-		if (bd->user_disk_0 != NULL) {
-			del_gendisk(bd->user_disk_0);
-			devidx = bd->user_disk_0->first_minor
-				>> CYASBLKDEV_SHIFT;
-			__clear_bit(devidx, dev_use);
-		}
-
-		if (bd->user_disk_1 != NULL) {
-			del_gendisk(bd->user_disk_1);
-			devidx = bd->user_disk_1->first_minor
-				>> CYASBLKDEV_SHIFT;
-			__clear_bit(devidx, dev_use);
-		}
-
-		if (bd->system_disk != NULL) {
-			del_gendisk(bd->system_disk);
-			devidx = bd->system_disk->first_minor
-				>> CYASBLKDEV_SHIFT;
-			__clear_bit(devidx, dev_use);
-		}
-
-		cyasblkdev_blk_put(bd);
-	}
-}
-
-/* block device exit */
-static void __exit cyasblkdev_blk_exit(void)
-{
-	DBGPRN_FUNC_NAME;
-
-	cyasblkdev_blk_deinit(gl_bd);
-	unregister_blkdev(major, "cyasblkdev");
-
-}
-
-module_init(cyasblkdev_blk_init);
-module_exit(cyasblkdev_blk_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("antioch (cyasblkdev) block device driver");
-MODULE_AUTHOR("cypress semiconductor");
-
-/*[]*/
diff --git a/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.c b/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.c
deleted file mode 100644
index d1996a27515e..000000000000
--- a/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.c
+++ /dev/null
@@ -1,417 +0,0 @@
-/* cyanblkdev_queue.h - Antioch Linux Block Driver queue source file
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor,
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-/*
- * Request queue handling for Antioch block device driver.
- * Based on the mmc queue handling code by Russell King in the
- * linux 2.6.10 kernel.
- */
-
-/*
- *  linux/drivers/mmc/mmc_queue.c
- *
- *  Copyright (C) 2003 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/blkdev.h>
-
-#include "cyasblkdev_queue.h"
-
-#define CYASBLKDEV_QUEUE_EXIT		(1 << 0)
-#define CYASBLKDEV_QUEUE_SUSPENDED	(1 << 1)
-#define CY_AS_USE_ASYNC_API
-
-
-
-/* print flags by name */
-const char *rq_flag_bit_names[] = {
-	"REQ_RW",			/* not set, read. set, write */
-	"REQ_FAILFAST",		/* no low level driver retries */
-	"REQ_SORTED",		/* elevator knows about this request */
-	"REQ_SOFTBARRIER",	/* may not be passed by ioscheduler */
-	"REQ_HARDBARRIER",	/* may not be passed by drive either */
-	"REQ_FUA",			/* forced unit access */
-	"REQ_NOMERGE",		/* don't touch this for merging */
-	"REQ_STARTED",		/* drive already may have started this one */
-	"REQ_DONTPREP",		/* don't call prep for this one */
-	"REQ_QUEUED",		/* uses queueing */
-	"REQ_ELVPRIV",		/* elevator private data attached */
-	"REQ_FAILED",		/* set if the request failed */
-	"REQ_QUIET",		/* don't worry about errors */
-	"REQ_PREEMPT",		/* set for "ide_preempt" requests */
-	"REQ_ORDERED_COLOR",/* is before or after barrier */
-	"REQ_RW_SYNC",		/* request is sync (O_DIRECT) */
-	"REQ_ALLOCED",		/* request came from our alloc pool */
-	"REQ_RW_META",		/* metadata io request */
-	"REQ_COPY_USER",	/* contains copies of user pages */
-	"REQ_NR_BITS",		/* stops here */
-};
-
-void verbose_rq_flags(int flags)
-{
-	int i;
-	uint32_t j;
-	j = 1;
-	for (i = 0; i < 32; i++) {
-		if (flags & j)
-			DBGPRN("<1>%s", rq_flag_bit_names[i]);
-		j = j << 1;
-	}
-}
-
-
-/*
- * Prepare a -BLK_DEV  request.  Essentially, this means passing the
- * preparation off to the media driver.  The media driver will
- * create request to CyAsDev.
- */
-static int cyasblkdev_prep_request(
-	struct request_queue *q, struct request *req)
-{
-	DBGPRN_FUNC_NAME;
-
-	/* we only like normal block requests.*/
-	if (req->cmd_type != REQ_TYPE_FS && !(req->cmd_flags & REQ_DISCARD)) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s:%x bad request received\n",
-			__func__, current->pid);
-		#endif
-
-		blk_dump_rq_flags(req, "cyasblkdev bad request");
-		return BLKPREP_KILL;
-	}
-
-	req->cmd_flags |= REQ_DONTPREP;
-
-	return BLKPREP_OK;
-}
-
-/* queue worker thread */
-static int cyasblkdev_queue_thread(void *d)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	struct cyasblkdev_queue *bq = d;
-	struct request_queue *q = bq->queue;
-	u32 qth_pid;
-
-	DBGPRN_FUNC_NAME;
-
-	/*
-	 * set iothread to ensure that we aren't put to sleep by
-	 * the process freezing.  we handle suspension ourselves.
-	 */
-	daemonize("cyasblkdev_queue_thread");
-
-	/* signal to queue_init() so it could contnue */
-	complete(&bq->thread_complete);
-
-	down(&bq->thread_sem);
-	add_wait_queue(&bq->thread_wq, &wait);
-
-	qth_pid = current->pid;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message(
-		"%s:%x started, bq:%p, q:%p\n", __func__, qth_pid, bq, q);
-	#endif
-
-	do {
-		struct request *req = NULL;
-
-		/* the thread wants to be woken up by signals as well */
-		set_current_state(TASK_INTERRUPTIBLE);
-
-		spin_lock_irq(q->queue_lock);
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"%s: for bq->queue is null\n", __func__);
-		#endif
-
-		if (!bq->req) {
-			/* chk if queue is plugged */
-			if (!blk_queue_plugged(q)) {
-				bq->req = req = blk_fetch_request(q);
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-					"%s: blk_fetch_request:%x\n",
-					__func__, (uint32_t)req);
-				#endif
-			} else {
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-					"%s: queue plugged, "
-					"skip blk_fetch()\n", __func__);
-				#endif
-			}
-		}
-		spin_unlock_irq(q->queue_lock);
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"%s: checking if request queue is null\n", __func__);
-		#endif
-
-		if (!req) {
-			if (bq->flags & CYASBLKDEV_QUEUE_EXIT) {
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-					"%s:got QUEUE_EXIT flag\n", __func__);
-				#endif
-
-				break;
-			}
-
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-				"%s: request queue is null, goto sleep, "
-				"thread_sem->count=%d\n",
-				__func__, bq->thread_sem.count);
-			if (spin_is_locked(q->queue_lock)) {
-				cy_as_hal_print_message("%s: queue_lock "
-				"is locked, need to release\n", __func__);
-				spin_unlock(q->queue_lock);
-
-				if (spin_is_locked(q->queue_lock))
-					cy_as_hal_print_message(
-						"%s: unlock did not work\n",
-						__func__);
-			} else {
-				cy_as_hal_print_message(
-					"%s: checked lock, is not locked\n",
-					__func__);
-			}
-			#endif
-
-			up(&bq->thread_sem);
-
-			/* yields to the next rdytorun proc,
-			 * then goes back to sleep*/
-			schedule();
-			down(&bq->thread_sem);
-
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-				"%s: wake_up,continue\n",
-				__func__);
-			#endif
-			continue;
-		}
-
-		/* new req received, issue it to the driver  */
-		set_current_state(TASK_RUNNING);
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"%s: issued a RQ:%x\n",
-			__func__, (uint32_t)req);
-		#endif
-
-		bq->issue_fn(bq, req);
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"%s: bq->issue_fn() returned\n",
-			__func__);
-		#endif
-
-
-	} while (1);
-
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&bq->thread_wq, &wait);
-	up(&bq->thread_sem);
-
-	complete_and_exit(&bq->thread_complete, 0);
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("%s: is finished\n", __func__);
-	#endif
-
-	return 0;
-}
-
-/*
- * Generic request handler. it is called for any queue on a
- * particular host.  When the host is not busy, we look for a request
- * on any queue on this host, and attempt to issue it.  This may
- * not be the queue we were asked to process.
- */
-static void cyasblkdev_request(struct request_queue *q)
-{
-	struct cyasblkdev_queue *bq = q->queuedata;
-	DBGPRN_FUNC_NAME;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message(
-		"%s new request on cyasblkdev_queue_t bq:=%x\n",
-		__func__, (uint32_t)bq);
-	#endif
-
-	if (!bq->req) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s wake_up(&bq->thread_wq)\n",
-			__func__);
-		#endif
-
-		/* wake up cyasblkdev_queue worker thread*/
-		wake_up(&bq->thread_wq);
-	} else {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: don't wake Q_thr, bq->req:%x\n",
-			__func__, (uint32_t)bq->req);
-		#endif
-	}
-}
-
-/*
- * cyasblkdev_init_queue - initialise a queue structure.
- * @bq: cyasblkdev queue
- * @dev:  CyAsDeviceHandle to attach this queue
- * @lock: queue lock
- *
- * Initialise a cyasblkdev_request queue.
- */
-
-/* MAX NUMBER OF SECTORS PER REQUEST **/
-#define Q_MAX_SECTORS 128
-
-/* MAX NUMBER OF PHYS SEGMENTS (entries in the SG list)*/
-#define Q_MAX_SGS   16
-
-int cyasblkdev_init_queue(struct cyasblkdev_queue *bq, spinlock_t *lock)
-{
-	int ret;
-
-	DBGPRN_FUNC_NAME;
-
-	/* 1st param is a function that wakes up the queue thread */
-	bq->queue = blk_init_queue(cyasblkdev_request, lock);
-	if (!bq->queue)
-		return -ENOMEM;
-
-	blk_queue_prep_rq(bq->queue, cyasblkdev_prep_request);
-
-	blk_queue_bounce_limit(bq->queue, BLK_BOUNCE_ANY);
-	blk_queue_max_hw_sectors(bq->queue, Q_MAX_SECTORS);
-
-	/* As of now, we have the HAL/driver support to
-	 * merge scattered segments and handle them simultaneously.
-	 * so, setting the max_phys_segments to 8. */
-	/*blk_queue_max_phys_segments(bq->queue, Q_MAX_SGS);
-	blk_queue_max_hw_segments(bq->queue, Q_MAX_SGS);*/
-	blk_queue_max_segments(bq->queue, Q_MAX_SGS);
-
-	/* should be < then HAL can handle */
-	blk_queue_max_segment_size(bq->queue, 512*Q_MAX_SECTORS);
-
-	bq->queue->queuedata = bq;
-	bq->req = NULL;
-
-	init_completion(&bq->thread_complete);
-	init_waitqueue_head(&bq->thread_wq);
-	sema_init(&bq->thread_sem, 1);
-
-	ret = kernel_thread(cyasblkdev_queue_thread, bq, CLONE_KERNEL);
-	if (ret >= 0) {
-		/* wait until the thread is spawned */
-		wait_for_completion(&bq->thread_complete);
-
-		/* reinitialize the completion */
-		init_completion(&bq->thread_complete);
-		ret = 0;
-		goto out;
-	}
-
-out:
-	return ret;
-}
-EXPORT_SYMBOL(cyasblkdev_init_queue);
-
-/*called from blk_put()  */
-void cyasblkdev_cleanup_queue(struct cyasblkdev_queue *bq)
-{
-	DBGPRN_FUNC_NAME;
-
-	bq->flags |= CYASBLKDEV_QUEUE_EXIT;
-	wake_up(&bq->thread_wq);
-	wait_for_completion(&bq->thread_complete);
-
-	blk_cleanup_queue(bq->queue);
-}
-EXPORT_SYMBOL(cyasblkdev_cleanup_queue);
-
-
-/**
- * cyasblkdev_queue_suspend - suspend a CyAsBlkDev request queue
- * @bq: CyAsBlkDev queue to suspend
- *
- * Stop the block request queue, and wait for our thread to
- * complete any outstanding requests.  This ensures that we
- * won't suspend while a request is being processed.
- */
-void cyasblkdev_queue_suspend(struct cyasblkdev_queue *bq)
-{
-	struct request_queue *q = bq->queue;
-	unsigned long flags;
-
-	DBGPRN_FUNC_NAME;
-
-	if (!(bq->flags & CYASBLKDEV_QUEUE_SUSPENDED)) {
-		bq->flags |= CYASBLKDEV_QUEUE_SUSPENDED;
-
-		spin_lock_irqsave(q->queue_lock, flags);
-		blk_stop_queue(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-
-		down(&bq->thread_sem);
-	}
-}
-EXPORT_SYMBOL(cyasblkdev_queue_suspend);
-
-/*cyasblkdev_queue_resume - resume a previously suspended
- * CyAsBlkDev request queue @bq: CyAsBlkDev queue to resume */
-void cyasblkdev_queue_resume(struct cyasblkdev_queue *bq)
-{
-	struct request_queue *q = bq->queue;
-	unsigned long flags;
-
-	DBGPRN_FUNC_NAME;
-
-	if (bq->flags & CYASBLKDEV_QUEUE_SUSPENDED)  {
-		bq->flags &= ~CYASBLKDEV_QUEUE_SUSPENDED;
-
-		up(&bq->thread_sem);
-
-		spin_lock_irqsave(q->queue_lock, flags);
-		blk_start_queue(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-	}
-}
-EXPORT_SYMBOL(cyasblkdev_queue_resume);
-
-/*[]*/
diff --git a/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.h b/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.h
deleted file mode 100644
index 51cba6ae6718..000000000000
--- a/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* cyanblkdev_queue.h - Antioch Linux Block Driver queue header file
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYANBLKDEV_QUEUE_H_
-#define _INCLUDED_CYANBLKDEV_QUEUE_H_
-
-/*
- * may contain various useful MACRO and debug printks
- */
-
-/* moved to staging location, eventual implementation
- * considered is here
- * #include <linux/westbridge/cyashal.h>
- * #include <linux/westbridge/cyastoria.h>
- * */
-
-#include "../include/linux/westbridge/cyashal.h"
-#include "../include/linux/westbridge/cyastoria.h"
-
-struct request;
-struct task_struct;
-
-struct cyasblkdev_queue {
-	struct completion	thread_complete;
-	wait_queue_head_t	thread_wq;
-	struct semaphore	thread_sem;
-	unsigned int	flags;
-	struct request	*req;
-	int	(*prep_fn)(struct cyasblkdev_queue *, struct request *);
-	int	(*issue_fn)(struct cyasblkdev_queue *, struct request *);
-	void		*data;
-	struct request_queue *queue;
-};
-
-extern int cyasblkdev_init_queue(struct cyasblkdev_queue *, spinlock_t *);
-extern void cyasblkdev_cleanup_queue(struct cyasblkdev_queue *);
-extern void cyasblkdev_queue_suspend(struct cyasblkdev_queue *);
-extern void cyasblkdev_queue_resume(struct cyasblkdev_queue *);
-
-extern cy_as_device_handle cyasdevice_getdevhandle(void);
-#define MOD_LOGS 1
-void verbose_rq_flags(int flags);
-
-#endif /* _INCLUDED_CYANBLKDEV_QUEUE_H_ */
-
-/*[]*/
diff --git a/drivers/staging/westbridge/astoria/device/Kconfig b/drivers/staging/westbridge/astoria/device/Kconfig
deleted file mode 100644
index cc99658cf3a4..000000000000
--- a/drivers/staging/westbridge/astoria/device/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# West Bridge block driver configuration
-#
-
-config WESTBRIDGE_DEVICE_DRIVER
-	tristate "West Bridge Device Driver"
-	help
-		Include the West Bridge based device driver
-
diff --git a/drivers/staging/westbridge/astoria/device/Makefile b/drivers/staging/westbridge/astoria/device/Makefile
deleted file mode 100644
index 7af8b5b0a8f5..000000000000
--- a/drivers/staging/westbridge/astoria/device/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Makefile for the kernel westbridge device driver
-#
-
-ifneq ($(CONFIG_WESTBRIDGE_DEBUG),y)
-	EXTRA_CFLAGS		+= -DWESTBRIDGE_NDEBUG
-endif
-
-obj-$(CONFIG_WESTBRIDGE_DEVICE_DRIVER)  += cyasdev.o
-
-
-ifeq ($(CONFIG_MACH_OMAP3_WESTBRIDGE_AST_PNAND_HAL),y)
-#moved for staging compatbility
-#cyasdev-y		:= ../../../arch/arm/mach-omap2/cyashalomap_kernel.o cyasdevice.o
-cyasdev-y		:= ../arch/arm/mach-omap2/cyashalomap_kernel.o cyasdevice.o \
-			   ../api/src/cyasdma.o ../api/src/cyasintr.o ../api/src/cyaslep2pep.o \
-			   ../api/src/cyaslowlevel.o ../api/src/cyasmisc.o ../api/src/cyasmtp.o \
-			   ../api/src/cyasstorage.o ../api/src/cyasusb.o
-
-else
-# should not get here, need to be built with some hal
-cyasdev-y		:= cyasdevice.o
-endif
diff --git a/drivers/staging/westbridge/astoria/device/cyasdevice.c b/drivers/staging/westbridge/astoria/device/cyasdevice.c
deleted file mode 100644
index 7de35ccffd32..000000000000
--- a/drivers/staging/westbridge/astoria/device/cyasdevice.c
+++ /dev/null
@@ -1,409 +0,0 @@
-/*
-## cyandevice.c - Linux Antioch device driver file
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/sched.h>
-#include <linux/scatterlist.h>
-#include <linux/err.h>
-#include <linux/firmware.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-/* moved for staging location
- * update/patch submission
-#include <linux/westbridge/cyastoria.h>
-#include <linux/westbridge/cyashal.h>
-#include <linux/westbridge/cyasregs.h>
-*/
-
-#include "../include/linux/westbridge/cyastoria.h"
-#include "../include/linux/westbridge/cyashal.h"
-#include "../include/linux/westbridge/cyasregs.h"
-
-typedef struct cyasdevice {
-		/* Handle to the Antioch device */
-		cy_as_device_handle			dev_handle;
-		/* Handle to the HAL */
-		cy_as_hal_device_tag			hal_tag;
-		spinlock_t	  common_lock;
-		unsigned long flags;
-} cyasdevice;
-
-/* global ptr to astoria device */
-static cyasdevice *cy_as_device_controller;
-int cy_as_device_init_done;
-const char *dev_handle_name = "cy_astoria_dev_handle";
-
-#ifdef CONFIG_MACH_OMAP3_WESTBRIDGE_AST_PNAND_HAL
-extern void cy_as_hal_config_c_s_mux(void);
-#endif
-
-static void cyasdevice_deinit(cyasdevice *cy_as_dev)
-{
-	cy_as_hal_print_message("<1>_cy_as_device deinitialize called\n");
-	if (!cy_as_dev) {
-		cy_as_hal_print_message("<1>_cy_as_device_deinit:  "
-			"device handle %x is invalid\n", (uint32_t)cy_as_dev);
-		return;
-	}
-
-	/* stop west_brige */
-	if (cy_as_dev->dev_handle) {
-		cy_as_hal_print_message("<1>_cy_as_device: "
-			"cy_as_misc_destroy_device called\n");
-		if (cy_as_misc_destroy_device(cy_as_dev->dev_handle) !=
-			CY_AS_ERROR_SUCCESS) {
-			cy_as_hal_print_message(
-				"<1>_cy_as_device: destroying failed\n");
-		}
-	}
-
-	if (cy_as_dev->hal_tag) {
-
- #ifdef CONFIG_MACH_OMAP3_WESTBRIDGE_AST_PNAND_HAL
-		if (stop_o_m_a_p_kernel(dev_handle_name,
-			cy_as_dev->hal_tag) != 0)
-			cy_as_hal_print_message("<1>_cy_as_device: stopping "
-				"OMAP kernel HAL failed\n");
-
- #endif
-	}
-	cy_as_hal_print_message("<1>_cy_as_device:HAL layer stopped\n");
-
-	kfree(cy_as_dev);
-	cy_as_device_controller = NULL;
-	cy_as_hal_print_message("<1>_cy_as_device: deinitialized\n");
-}
-
-/*called from src/cyasmisc.c:MyMiscCallback() as a func
- * pointer  [dev_p->misc_event_cb] which was previously
- * registered by CyAsLLRegisterRequestCallback(...,
- * MyMiscCallback); called from CyAsMiscConfigureDevice()
- * which is in turn called from cyasdevice_initialize() in
- * this src
- */
-static void cy_misc_callback(cy_as_device_handle h,
-	cy_as_misc_event_type evtype, void *evdata)
-{
-	(void)h;
-	(void)evdata;
-
-	switch (evtype) {
-	case cy_as_event_misc_initialized:
-	cy_as_hal_print_message("<1>_cy_as_device: "
-		"initialization done callback triggered\n");
-	cy_as_device_init_done = 1;
-	break;
-
-	case cy_as_event_misc_awake:
-	cy_as_hal_print_message("<1>_cy_as_device: "
-		"cy_as_event_misc_awake event callback triggered\n");
-	cy_as_device_init_done = 1;
-	break;
-	default:
-	break;
-	}
-}
-
-void cy_as_acquire_common_lock()
-{
-	spin_lock_irqsave(&cy_as_device_controller->common_lock,
-		cy_as_device_controller->flags);
-}
-EXPORT_SYMBOL(cy_as_acquire_common_lock);
-
-void cy_as_release_common_lock()
-{
-	spin_unlock_irqrestore(&cy_as_device_controller->common_lock,
-		cy_as_device_controller->flags);
-}
-EXPORT_SYMBOL(cy_as_release_common_lock);
-
-/* reset astoria and reinit all regs */
- #define PNAND_REG_CFG_INIT_VAL 0x0000
-void  hal_reset(cy_as_hal_device_tag tag)
-{
-	cy_as_hal_print_message("<1> send soft hard rst: "
-		"MEM_RST_CTRL_REG_HARD...\n");
-	cy_as_hal_write_register(tag, CY_AS_MEM_RST_CTRL_REG,
-		CY_AS_MEM_RST_CTRL_REG_HARD);
-	mdelay(60);
-
-	cy_as_hal_print_message("<1> after RST: si_rev_REG:%x, "
-		"PNANDCFG_reg:%x\n",
-		 cy_as_hal_read_register(tag, CY_AS_MEM_CM_WB_CFG_ID),
-		 cy_as_hal_read_register(tag, CY_AS_MEM_PNAND_CFG)
-	);
-
-	/* set it to LBD */
-	cy_as_hal_write_register(tag, CY_AS_MEM_PNAND_CFG,
-		PNAND_REG_CFG_INIT_VAL);
-}
-EXPORT_SYMBOL(hal_reset);
-
-
-/* below structures and functions primarily
- * implemented for firmware loading */
-static struct platform_device *westbridge_pd;
-
-static int __devinit wb_probe(struct platform_device *devptr)
-{
-	cy_as_hal_print_message("%s called\n", __func__);
-	return 0;
-}
-
-static int __devexit wb_remove(struct platform_device *devptr)
-{
-	cy_as_hal_print_message("%s called\n", __func__);
-	return 0;
-}
-
-static struct platform_driver west_bridge_driver = {
-	.probe = wb_probe,
-	.remove = __devexit_p(wb_remove),
-	.driver = {
-		   .name = "west_bridge_dev"},
-};
-
-/* west bridge device driver main init */
-static int cyasdevice_initialize(void)
-{
-	cyasdevice *cy_as_dev = 0;
-	int		 ret	= 0;
-	int		 retval = 0;
-	cy_as_device_config config;
-	cy_as_hal_sleep_channel channel;
-	cy_as_get_firmware_version_data ver_data = {0};
-	const char *str = "";
-	int spin_lim;
-	const struct firmware *fw_entry;
-
-	cy_as_device_init_done = 0;
-
-	cy_as_misc_set_log_level(8);
-
-	cy_as_hal_print_message("<1>_cy_as_device initialize called\n");
-
-	if (cy_as_device_controller != 0) {
-		cy_as_hal_print_message("<1>_cy_as_device: the device "
-			"has already been initilaized. ignoring\n");
-		return -EBUSY;
-	}
-
-	/* cy_as_dev = CyAsHalAlloc (sizeof(cyasdevice), SLAB_KERNEL); */
-	cy_as_dev = cy_as_hal_alloc(sizeof(cyasdevice));
-	if (cy_as_dev == NULL) {
-		cy_as_hal_print_message("<1>_cy_as_device: "
-			"memory allocation failed\n");
-		return -ENOMEM;
-	}
-	memset(cy_as_dev, 0, sizeof(cyasdevice));
-
-
-	/* Init the HAL & CyAsDeviceHandle */
-
- #ifdef CONFIG_MACH_OMAP3_WESTBRIDGE_AST_PNAND_HAL
- /* start OMAP HAL init instsnce */
-
-	if (!start_o_m_a_p_kernel(dev_handle_name,
-		&(cy_as_dev->hal_tag), cy_false)) {
-
-		cy_as_hal_print_message(
-			"<1>_cy_as_device: start OMAP34xx HAL failed\n");
-		goto done;
-	}
- #endif
-
-	/* Now create the device */
-	if (cy_as_misc_create_device(&(cy_as_dev->dev_handle),
-		cy_as_dev->hal_tag) != CY_AS_ERROR_SUCCESS) {
-
-		cy_as_hal_print_message(
-			"<1>_cy_as_device: create device failed\n");
-		goto done;
-	}
-
-	memset(&config, 0, sizeof(config));
-	config.dmaintr = cy_true;
-
-	ret = cy_as_misc_configure_device(cy_as_dev->dev_handle, &config);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-
-		cy_as_hal_print_message(
-			"<1>_cy_as_device: configure device "
-			"failed. reason code: %d\n", ret);
-		goto done;
-	}
-
-	ret = cy_as_misc_register_callback(cy_as_dev->dev_handle,
-		cy_misc_callback);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_hal_print_message("<1>_cy_as_device: "
-			"cy_as_misc_register_callback failed. "
-			"reason code: %d\n", ret);
-		goto done;
-	}
-
-	ret = platform_driver_register(&west_bridge_driver);
-	if (unlikely(ret < 0))
-		return ret;
-	westbridge_pd = platform_device_register_simple(
-		"west_bridge_dev", -1, NULL, 0);
-
-	if (IS_ERR(westbridge_pd)) {
-		platform_driver_unregister(&west_bridge_driver);
-		return PTR_ERR(westbridge_pd);
-	}
-	/* Load the firmware */
-	ret = request_firmware(&fw_entry,
-		"west bridge fw", &westbridge_pd->dev);
-	if (ret) {
-		cy_as_hal_print_message("cy_as_device: "
-			"request_firmware failed return val = %d\n", ret);
-	} else {
-		cy_as_hal_print_message("cy_as_device: "
-			"got the firmware %d size=0x%x\n", ret, fw_entry->size);
-
-		ret = cy_as_misc_download_firmware(
-			cy_as_dev->dev_handle,
-			fw_entry->data,
-			fw_entry->size ,
-			0, 0);
-	}
-
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_hal_print_message("<1>_cy_as_device: cannot download "
-			"firmware. reason code: %d\n", ret);
-		goto done;
-	}
-
-	/* spin until the device init is completed */
-	/* 50 -MAX wait time for the FW load & init
-	 * to complete is 5sec*/
-	spin_lim = 50;
-
-	cy_as_hal_create_sleep_channel(&channel);
-	while (!cy_as_device_init_done) {
-
-		cy_as_hal_sleep_on(&channel, 100);
-
-		if (spin_lim-- <= 0) {
-			cy_as_hal_print_message(
-			"<1>\n_e_r_r_o_r!: "
-			"wait for FW init has timed out !!!");
-			break;
-		}
-	}
-	cy_as_hal_destroy_sleep_channel(&channel);
-
-	if (spin_lim > 0)
-		cy_as_hal_print_message(
-			"cy_as_device: astoria firmware is loaded\n");
-
-	ret = cy_as_misc_get_firmware_version(cy_as_dev->dev_handle,
-		&ver_data, 0, 0);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_hal_print_message("<1>_cy_as_device: cannot get firmware "
-			"version. reason code: %d\n", ret);
-		goto done;
-	}
-
-	if ((ver_data.media_type & 0x01) && (ver_data.media_type & 0x06))
-		str = "nand and SD/MMC.";
-	else if ((ver_data.media_type & 0x01) && (ver_data.media_type & 0x08))
-		str = "nand and CEATA.";
-	else if (ver_data.media_type & 0x01)
-		str = "nand.";
-	else if (ver_data.media_type & 0x08)
-		str = "CEATA.";
-	else
-		str = "SD/MMC.";
-
-	cy_as_hal_print_message("<1> cy_as_device:_firmware version: %s "
-		"major=%d minor=%d build=%d,\n_media types supported:%s\n",
-		((ver_data.is_debug_mode) ? "debug" : "release"),
-		ver_data.major, ver_data.minor, ver_data.build, str);
-
-	spin_lock_init(&cy_as_dev->common_lock);
-
-	/* done now */
-	cy_as_device_controller = cy_as_dev;
-
-	return 0;
-
-done:
-	if (cy_as_dev)
-		cyasdevice_deinit(cy_as_dev);
-
-	return -EINVAL;
-}
-
-cy_as_device_handle cyasdevice_getdevhandle(void)
-{
-	if (cy_as_device_controller) {
-		#ifdef CONFIG_MACH_OMAP3_WESTBRIDGE_AST_PNAND_HAL
-			cy_as_hal_config_c_s_mux();
-		#endif
-
-		return cy_as_device_controller->dev_handle;
-	}
-	return NULL;
-}
-EXPORT_SYMBOL(cyasdevice_getdevhandle);
-
-cy_as_hal_device_tag cyasdevice_gethaltag(void)
-{
-	if (cy_as_device_controller)
-		return (cy_as_hal_device_tag)
-			cy_as_device_controller->hal_tag;
-
-	return NULL;
-}
-EXPORT_SYMBOL(cyasdevice_gethaltag);
-
-
-/*init Westbridge device driver **/
-static int __init cyasdevice_init(void)
-{
-	if (cyasdevice_initialize() != 0)
-		return -ENODEV;
-
-	return 0;
-}
-
-
-static void __exit cyasdevice_cleanup(void)
-{
-
-	cyasdevice_deinit(cy_as_device_controller);
-}
-
-
-MODULE_DESCRIPTION("west bridge device driver");
-MODULE_AUTHOR("cypress semiconductor");
-MODULE_LICENSE("GPL");
-
-module_init(cyasdevice_init);
-module_exit(cyasdevice_cleanup);
-
-/*[]*/
diff --git a/drivers/staging/westbridge/astoria/gadget/Kconfig b/drivers/staging/westbridge/astoria/gadget/Kconfig
deleted file mode 100644
index 6fbdf2277b03..000000000000
--- a/drivers/staging/westbridge/astoria/gadget/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# West Bridge gadget driver configuration
-#
-
-config WESTBRIDGE_GADGET_DRIVER
-	tristate "West Bridge Gadget Driver"
-	help
-		Include the West Bridge based gadget peripheral controller driver
-
diff --git a/drivers/staging/westbridge/astoria/gadget/Makefile b/drivers/staging/westbridge/astoria/gadget/Makefile
deleted file mode 100644
index a5eef7ee60a4..000000000000
--- a/drivers/staging/westbridge/astoria/gadget/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the kernel westbridge hal
-#
-
-ifneq ($(CONFIG_WESTBRIDGE_DEBUG),y)
-	EXTRA_CFLAGS		+= -DWESTBRIDGE_NDEBUG
-endif
-
-obj-$(CONFIG_WESTBRIDGE_GADGET_DRIVER)  += cyasgadgetctrl.o
-cyasgadgetctrl-y		:= cyasgadget.o
-
diff --git a/drivers/staging/westbridge/astoria/gadget/cyasgadget.c b/drivers/staging/westbridge/astoria/gadget/cyasgadget.c
deleted file mode 100644
index 92015ecd7829..000000000000
--- a/drivers/staging/westbridge/astoria/gadget/cyasgadget.c
+++ /dev/null
@@ -1,2189 +0,0 @@
-/* cyangadget.c - Linux USB Gadget driver file for the Cypress West Bridge
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-/*
- * Cypress West Bridge high/full speed usb device controller code
- * Based on the Netchip 2280 device controller by David Brownell
- * in the linux 2.6.10 kernel
- *
- * linux/drivers/usb/gadget/net2280.c
- */
-
-/*
- * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
- * Copyright (C) 2003 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330
- * Boston, MA  02111-1307  USA
- */
-
-#include "cyasgadget.h"
-
-#define	CY_AS_DRIVER_DESC		"cypress west bridge usb gadget"
-#define	CY_AS_DRIVER_VERSION		"REV B"
-#define	DMA_ADDR_INVALID			(~(dma_addr_t)0)
-
-static const char cy_as_driver_name[] = "cy_astoria_gadget";
-static const char cy_as_driver_desc[] = CY_AS_DRIVER_DESC;
-
-static const char cy_as_ep0name[] = "EP0";
-static const char *cy_as_ep_names[] = {
-	cy_as_ep0name, "EP1",
-	"EP2", "EP3", "EP4", "EP5", "EP6", "EP7", "EP8",
-	"EP9", "EP10", "EP11", "EP12", "EP13", "EP14", "EP15"
-};
-
-/* forward declarations */
-static void
-cyas_ep_reset(
-	struct cyasgadget_ep *an_ep);
-
-static int
-cyasgadget_fifo_status(
-	struct usb_ep *_ep);
-
-static void
-cyasgadget_stallcallback(
-	cy_as_device_handle h,
-	cy_as_return_status_t status,
-	uint32_t tag,
-	cy_as_funct_c_b_type cbtype,
-	void *cbdata);
-
-/* variables */
-static cyasgadget	*cy_as_gadget_controller;
-
-static int append_mtp;
-module_param(append_mtp, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(append_mtp,
-	"west bridge to append descriptors for mtp 0=no 1=yes");
-
-static int msc_enum_bus_0;
-module_param(msc_enum_bus_0, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(msc_enum_bus_0,
-	"west bridge to enumerate bus 0 as msc 0=no 1=yes");
-
-static int msc_enum_bus_1;
-module_param(msc_enum_bus_1, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(msc_enum_bus_1,
-	"west bridge to enumerate bus 1 as msc 0=no 1=yes");
-
-/* all Callbacks are placed in this subsection*/
-static void cy_as_gadget_usb_event_callback(
-					cy_as_device_handle h,
-					cy_as_usb_event ev,
-					void *evdata
-					)
-{
-	cyasgadget  *cy_as_dev;
-	#ifndef WESTBRIDGE_NDEBUG
-	struct usb_ctrlrequest *ctrlreq;
-	#endif
-
-	/* cy_as_dev = container_of(h, cyasgadget, dev_handle); */
-	cy_as_dev = cy_as_gadget_controller;
-	switch (ev) {
-	case cy_as_event_usb_suspend:
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"<1>_cy_as_event_usb_suspend received\n");
-		#endif
-		cy_as_dev->driver->suspend(&cy_as_dev->gadget);
-		break;
-
-	case cy_as_event_usb_resume:
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"<1>_cy_as_event_usb_resume received\n");
-		#endif
-		cy_as_dev->driver->resume(&cy_as_dev->gadget);
-		break;
-
-	case cy_as_event_usb_reset:
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"<1>_cy_as_event_usb_reset received\n");
-		#endif
-		break;
-
-	case cy_as_event_usb_speed_change:
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"<1>_cy_as_event_usb_speed_change received\n");
-		#endif
-		break;
-
-	case cy_as_event_usb_set_config:
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"<1>_cy_as_event_usb_set_config received\n");
-		#endif
-		break;
-
-	case cy_as_event_usb_setup_packet:
-		#ifndef WESTBRIDGE_NDEBUG
-		ctrlreq = (struct usb_ctrlrequest *)evdata;
-
-		cy_as_hal_print_message("<1>_cy_as_event_usb_setup_packet "
-							"received"
-							"bRequestType=0x%x,"
-							"bRequest=0x%x,"
-							"wValue=x%x,"
-							"wIndex=0x%x,"
-							"wLength=0x%x,",
-							ctrlreq->bRequestType,
-							ctrlreq->bRequest,
-							ctrlreq->wValue,
-							ctrlreq->wIndex,
-							ctrlreq->wLength
-							);
-		#endif
-		cy_as_dev->outsetupreq = 0;
-		if ((((uint8_t *)evdata)[0] & USB_DIR_IN) == USB_DIR_OUT)
-			cy_as_dev->outsetupreq = 1;
-		cy_as_dev->driver->setup(&cy_as_dev->gadget,
-			(struct usb_ctrlrequest *)evdata);
-		break;
-
-	case cy_as_event_usb_status_packet:
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"<1>_cy_as_event_usb_status_packet received\n");
-		#endif
-		break;
-
-	case cy_as_event_usb_inquiry_before:
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"<1>_cy_as_event_usb_inquiry_before received\n");
-		#endif
-		break;
-
-	case cy_as_event_usb_inquiry_after:
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"<1>_cy_as_event_usb_inquiry_after received\n");
-		#endif
-		break;
-
-	case cy_as_event_usb_start_stop:
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"<1>_cy_as_event_usb_start_stop received\n");
-		#endif
-		break;
-
-	default:
-		break;
-	}
-}
-
-static void cy_as_gadget_mtp_event_callback(
-					cy_as_device_handle handle,
-					cy_as_mtp_event evtype,
-					void *evdata
-					)
-{
-
-	cyasgadget *dev = cy_as_gadget_controller;
-	(void) handle;
-
-	switch (evtype) {
-	case cy_as_mtp_send_object_complete:
-		{
-			cy_as_mtp_send_object_complete_data *send_obj_data =
-				(cy_as_mtp_send_object_complete_data *) evdata;
-
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-				"<6>MTP EVENT: send_object_complete\n");
-			cy_as_hal_print_message(
-				"<6>_bytes sent = %d\n_send status = %d",
-					send_obj_data->byte_count,
-					send_obj_data->status);
-			#endif
-
-			dev->tmtp_send_complete_data.byte_count =
-				send_obj_data->byte_count;
-			dev->tmtp_send_complete_data.status =
-				send_obj_data->status;
-			dev->tmtp_send_complete_data.transaction_id =
-				send_obj_data->transaction_id;
-			dev->tmtp_send_complete = cy_true;
-			break;
-		}
-	case cy_as_mtp_get_object_complete:
-		{
-			cy_as_mtp_get_object_complete_data *get_obj_data =
-				(cy_as_mtp_get_object_complete_data *) evdata;
-
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-				"<6>MTP EVENT: get_object_complete\n");
-			cy_as_hal_print_message(
-				"<6>_bytes got = %d\n_get status = %d",
-				get_obj_data->byte_count, get_obj_data->status);
-			#endif
-
-			dev->tmtp_get_complete_data.byte_count =
-				get_obj_data->byte_count;
-			dev->tmtp_get_complete_data.status =
-				get_obj_data->status;
-			dev->tmtp_get_complete = cy_true;
-			break;
-		}
-	case cy_as_mtp_block_table_needed:
-		{
-			dev->tmtp_need_new_blk_tbl = cy_true;
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-				"<6>MTP EVENT: cy_as_mtp_block_table_needed\n");
-			#endif
-			break;
-		}
-	default:
-		break;
-	}
-}
-
-static void
-cyasgadget_setupreadcallback(
-		cy_as_device_handle h,
-		cy_as_end_point_number_t ep,
-		uint32_t count,
-		void *buf,
-		cy_as_return_status_t status)
-{
-	cyasgadget_ep  *an_ep;
-	cyasgadget_req *an_req;
-	cyasgadget	 *cy_as_dev;
-	unsigned	   stopped;
-	unsigned long	flags;
-	(void)buf;
-
-	cy_as_dev = cy_as_gadget_controller;
-	if (cy_as_dev->driver == NULL)
-		return;
-
-	an_ep =  &cy_as_dev->an_gadget_ep[ep];
-	spin_lock_irqsave(&cy_as_dev->lock, flags);
-	stopped = an_ep->stopped;
-
-#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message(
-		"%s: ep=%d, count=%d, "
-		"status=%d\n", __func__,  ep, count, status);
-#endif
-
-	an_req = list_entry(an_ep->queue.next,
-		cyasgadget_req, queue);
-	list_del_init(&an_req->queue);
-
-	if (status == CY_AS_ERROR_SUCCESS)
-		an_req->req.status = 0;
-	else
-		an_req->req.status = -status;
-	an_req->req.actual = count;
-	an_ep->stopped = 1;
-
-	spin_unlock_irqrestore(&cy_as_dev->lock, flags);
-
-	an_req->req.complete(&an_ep->usb_ep_inst, &an_req->req);
-
-	an_ep->stopped = stopped;
-
-}
-/*called when the write of a setup packet has been completed*/
-static void cyasgadget_setupwritecallback(
-					cy_as_device_handle h,
-					cy_as_end_point_number_t ep,
-					uint32_t count,
-					void *buf,
-					cy_as_return_status_t status
-					)
-{
-	cyasgadget_ep  *an_ep;
-	cyasgadget_req *an_req;
-	cyasgadget	 *cy_as_dev;
-	unsigned	   stopped;
-	unsigned long	flags;
-
-	(void)buf;
-
-	#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("<1>%s called status=0x%x\n",
-			__func__, status);
-	#endif
-
-	cy_as_dev = cy_as_gadget_controller;
-
-	if (cy_as_dev->driver == NULL)
-		return;
-
-	an_ep =  &cy_as_dev->an_gadget_ep[ep];
-
-	spin_lock_irqsave(&cy_as_dev->lock, flags);
-
-	stopped = an_ep->stopped;
-
-#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("setup_write_callback: ep=%d, "
-		"count=%d, status=%d\n", ep, count, status);
-#endif
-
-	an_req = list_entry(an_ep->queue.next, cyasgadget_req, queue);
-	list_del_init(&an_req->queue);
-
-	an_req->req.actual = count;
-	an_req->req.status = 0;
-	an_ep->stopped = 1;
-
-	spin_unlock_irqrestore(&cy_as_dev->lock, flags);
-
-	an_req->req.complete(&an_ep->usb_ep_inst, &an_req->req);
-
-	an_ep->stopped = stopped;
-
-}
-
-/* called when a read operation has completed.*/
-static void cyasgadget_readcallback(
-					cy_as_device_handle h,
-					cy_as_end_point_number_t ep,
-					uint32_t count,
-					void *buf,
-					cy_as_return_status_t status
-					)
-{
-	cyasgadget_ep  *an_ep;
-	cyasgadget_req *an_req;
-	cyasgadget	 *cy_as_dev;
-	unsigned	   stopped;
-	cy_as_return_status_t  ret;
-	unsigned long	flags;
-
-	(void)h;
-	(void)buf;
-
-	cy_as_dev = cy_as_gadget_controller;
-
-	if (cy_as_dev->driver == NULL)
-		return;
-
-	an_ep =  &cy_as_dev->an_gadget_ep[ep];
-	stopped = an_ep->stopped;
-
-	#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: ep=%d, count=%d, status=%d\n",
-			__func__, ep, count, status);
-	#endif
-
-	if (status == CY_AS_ERROR_CANCELED)
-		return;
-
-	spin_lock_irqsave(&cy_as_dev->lock, flags);
-
-	an_req = list_entry(an_ep->queue.next, cyasgadget_req, queue);
-	list_del_init(&an_req->queue);
-
-	if (status == CY_AS_ERROR_SUCCESS)
-		an_req->req.status = 0;
-	else
-		an_req->req.status = -status;
-
-	an_req->complete = 1;
-	an_req->req.actual = count;
-	an_ep->stopped = 1;
-
-	spin_unlock_irqrestore(&cy_as_dev->lock, flags);
-	an_req->req.complete(&an_ep->usb_ep_inst, &an_req->req);
-
-	an_ep->stopped = stopped;
-
-	/* We need to call ReadAsync on this end-point
-	 * again, so as to not miss any data packets. */
-	if (!an_ep->stopped) {
-		spin_lock_irqsave(&cy_as_dev->lock, flags);
-		an_req = 0;
-		if (!list_empty(&an_ep->queue))
-			an_req = list_entry(an_ep->queue.next,
-				cyasgadget_req, queue);
-
-		spin_unlock_irqrestore(&cy_as_dev->lock, flags);
-
-		if ((an_req) && (an_req->req.status == -EINPROGRESS)) {
-			ret = cy_as_usb_read_data_async(cy_as_dev->dev_handle,
-				an_ep->num, cy_false, an_req->req.length,
-				an_req->req.buf, cyasgadget_readcallback);
-
-			if (ret != CY_AS_ERROR_SUCCESS)
-				cy_as_hal_print_message("<1>_cy_as_gadget: "
-					"cy_as_usb_read_data_async failed "
-					"with error code %d\n", ret);
-			else
-				an_req->req.status = -EALREADY;
-		}
-	}
-}
-
-/* function is called when a usb write operation has completed*/
-static void cyasgadget_writecallback(
-					cy_as_device_handle h,
-					cy_as_end_point_number_t ep,
-					uint32_t count,
-					void *buf,
-					cy_as_return_status_t status
-					)
-{
-	cyasgadget_ep  *an_ep;
-	cyasgadget_req *an_req;
-	cyasgadget	 *cy_as_dev;
-	unsigned	   stopped = 0;
-	cy_as_return_status_t  ret;
-	unsigned long	flags;
-
-	(void)h;
-	(void)buf;
-
-	cy_as_dev = cy_as_gadget_controller;
-	if (cy_as_dev->driver == NULL)
-		return;
-
-	an_ep =  &cy_as_dev->an_gadget_ep[ep];
-
-	if (status == CY_AS_ERROR_CANCELED)
-		return;
-
-	#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: ep=%d, count=%d, status=%d\n",
-			__func__, ep, count, status);
-	#endif
-
-	spin_lock_irqsave(&cy_as_dev->lock, flags);
-
-	an_req = list_entry(an_ep->queue.next, cyasgadget_req, queue);
-	list_del_init(&an_req->queue);
-	an_req->req.actual = count;
-
-	/* Verify the status value before setting req.status to zero */
-	if (status == CY_AS_ERROR_SUCCESS)
-		an_req->req.status = 0;
-	else
-		an_req->req.status = -status;
-
-	an_ep->stopped = 1;
-
-	spin_unlock_irqrestore(&cy_as_dev->lock, flags);
-
-	an_req->req.complete(&an_ep->usb_ep_inst, &an_req->req);
-	an_ep->stopped = stopped;
-
-	/* We need to call WriteAsync on this end-point again, so as to not
-	   miss any data packets. */
-	if (!an_ep->stopped) {
-		spin_lock_irqsave(&cy_as_dev->lock, flags);
-		an_req = 0;
-		if (!list_empty(&an_ep->queue))
-			an_req = list_entry(an_ep->queue.next,
-				cyasgadget_req, queue);
-		spin_unlock_irqrestore(&cy_as_dev->lock, flags);
-
-		if ((an_req) && (an_req->req.status == -EINPROGRESS)) {
-			ret = cy_as_usb_write_data_async(cy_as_dev->dev_handle,
-				an_ep->num, an_req->req.length, an_req->req.buf,
-				cy_false, cyasgadget_writecallback);
-
-			if (ret != CY_AS_ERROR_SUCCESS)
-				cy_as_hal_print_message("<1>_cy_as_gadget: "
-					"cy_as_usb_write_data_async "
-					"failed with error code %d\n", ret);
-			else
-				an_req->req.status = -EALREADY;
-		}
-	}
-}
-
-static void cyasgadget_stallcallback(
-						cy_as_device_handle h,
-						cy_as_return_status_t status,
-						uint32_t tag,
-						cy_as_funct_c_b_type cbtype,
-						void *cbdata
-						)
-{
-	#ifndef WESTBRIDGE_NDEBUG
-	if (status != CY_AS_ERROR_SUCCESS)
-		cy_as_hal_print_message("<1>_set/_clear stall "
-			"failed with status %d\n", status);
-	#endif
-}
-
-
-/*******************************************************************/
-/* All usb_ep_ops (cyasgadget_ep_ops) are placed in this subsection*/
-/*******************************************************************/
-static int cyasgadget_enable(
-			struct usb_ep *_ep,
-			const struct usb_endpoint_descriptor *desc
-					)
-{
-	cyasgadget		*an_dev;
-	cyasgadget_ep	*an_ep;
-	u32			max, tmp;
-	unsigned long	flags;
-
-	an_ep = container_of(_ep, cyasgadget_ep, usb_ep_inst);
-	if (!_ep || !desc || an_ep->desc || _ep->name == cy_as_ep0name
-		|| desc->bDescriptorType != USB_DT_ENDPOINT)
-		return -EINVAL;
-
-	an_dev = an_ep->dev;
-	if (!an_dev->driver || an_dev->gadget.speed == USB_SPEED_UNKNOWN)
-		return -ESHUTDOWN;
-
-	max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff;
-
-	spin_lock_irqsave(&an_dev->lock, flags);
-	_ep->maxpacket = max & 0x7ff;
-	an_ep->desc = desc;
-
-	/* ep_reset() has already been called */
-	an_ep->stopped = 0;
-	an_ep->out_overflow = 0;
-
-	if (an_ep->cyepconfig.enabled != cy_true) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("<1>_cy_as_gadget: "
-			"cy_as_usb_end_point_config EP %s mismatch "
-			"on enabled\n", an_ep->usb_ep_inst.name);
-		#endif
-		spin_unlock_irqrestore(&an_dev->lock, flags);
-		return -EINVAL;
-	}
-
-	tmp = (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
-	an_ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC) ? 1 : 0;
-
-	spin_unlock_irqrestore(&an_dev->lock, flags);
-
-	switch (tmp) {
-	case USB_ENDPOINT_XFER_ISOC:
-		if (an_ep->cyepconfig.type != cy_as_usb_iso) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("<1>_cy_as_gadget: "
-				"cy_as_usb_end_point_config EP %s mismatch "
-				"on type %d %d\n", an_ep->usb_ep_inst.name,
-				an_ep->cyepconfig.type, cy_as_usb_iso);
-			#endif
-			return -EINVAL;
-		}
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		if (an_ep->cyepconfig.type != cy_as_usb_int) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("<1>_cy_as_gadget: "
-				"cy_as_usb_end_point_config EP %s mismatch "
-				"on type %d %d\n", an_ep->usb_ep_inst.name,
-				an_ep->cyepconfig.type, cy_as_usb_int);
-			#endif
-			return -EINVAL;
-		}
-		break;
-	default:
-		if (an_ep->cyepconfig.type != cy_as_usb_bulk) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("<1>_cy_as_gadget: "
-				"cy_as_usb_end_point_config EP %s mismatch "
-				"on type %d %d\n", an_ep->usb_ep_inst.name,
-				an_ep->cyepconfig.type, cy_as_usb_bulk);
-			#endif
-			return -EINVAL;
-		}
-		break;
-	}
-
-	tmp = desc->bEndpointAddress;
-	an_ep->is_in = (tmp & USB_DIR_IN) != 0;
-
-	if ((an_ep->cyepconfig.dir == cy_as_usb_in) &&
-	(!an_ep->is_in)) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("<1>_cy_as_gadget: "
-			"cy_as_usb_end_point_config EP %s mismatch "
-			"on dir %d %d\n", an_ep->usb_ep_inst.name,
-			an_ep->cyepconfig.dir, cy_as_usb_in);
-		#endif
-		return -EINVAL;
-	} else if ((an_ep->cyepconfig.dir == cy_as_usb_out) &&
-	(an_ep->is_in)) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("<1>_cy_as_gadget: "
-			"cy_as_usb_end_point_config EP %s mismatch "
-			"on dir %d %d\n", an_ep->usb_ep_inst.name,
-			an_ep->cyepconfig.dir, cy_as_usb_out);
-		#endif
-		return -EINVAL;
-	}
-
-	cy_as_usb_clear_stall(an_dev->dev_handle, an_ep->num,
-		cyasgadget_stallcallback, 0);
-
-	cy_as_hal_print_message("%s enabled %s (ep%d-%d) max %04x\n",
-		__func__, _ep->name, an_ep->num, tmp, max);
-
-	return 0;
-}
-
-static int cyasgadget_disable(
-					struct usb_ep *_ep
-					)
-{
-	cyasgadget_ep	*an_ep;
-	unsigned long	flags;
-
-	an_ep = container_of(_ep, cyasgadget_ep, usb_ep_inst);
-	if (!_ep || !an_ep->desc || _ep->name == cy_as_ep0name)
-		return -EINVAL;
-
-	spin_lock_irqsave(&an_ep->dev->lock, flags);
-	cyas_ep_reset(an_ep);
-
-	spin_unlock_irqrestore(&an_ep->dev->lock, flags);
-	return 0;
-}
-
-static struct usb_request *cyasgadget_alloc_request(
-			struct usb_ep *_ep, gfp_t gfp_flags
-			)
-{
-	cyasgadget_ep	*an_ep;
-	cyasgadget_req	*an_req;
-
-	if (!_ep)
-		return NULL;
-
-	an_ep = container_of(_ep, cyasgadget_ep, usb_ep_inst);
-
-	an_req = kzalloc(sizeof(cyasgadget_req), gfp_flags);
-	if (!an_req)
-		return NULL;
-
-	an_req->req.dma = DMA_ADDR_INVALID;
-	INIT_LIST_HEAD(&an_req->queue);
-
-	return &an_req->req;
-}
-
-static void cyasgadget_free_request(
-					struct usb_ep *_ep,
-					struct usb_request *_req
-					)
-{
-	cyasgadget_req *an_req;
-
-	if (!_ep || !_req)
-		return;
-
-	an_req = container_of(_req, cyasgadget_req, req);
-
-	kfree(an_req);
-}
-
-/* Load a packet into the fifo we use for usb IN transfers.
- * works for all endpoints. */
-static int cyasgadget_queue(
-				struct usb_ep *_ep,
-				struct usb_request *_req,
-				gfp_t gfp_flags
-				)
-{
-	cyasgadget_req	*as_req;
-	cyasgadget_ep	*as_ep;
-	cyasgadget		*cy_as_dev;
-	unsigned long	flags;
-	cy_as_return_status_t  ret = 0;
-
-	as_req = container_of(_req, cyasgadget_req, req);
-	if (!_req || !_req->complete || !_req->buf
-		|| !list_empty(&as_req->queue))
-		return -EINVAL;
-
-	as_ep = container_of(_ep, cyasgadget_ep, usb_ep_inst);
-
-	if (!_ep || (!as_ep->desc && (as_ep->num != 0)))
-		return -EINVAL;
-
-	cy_as_dev = as_ep->dev;
-	if (!cy_as_dev->driver ||
-		cy_as_dev->gadget.speed == USB_SPEED_UNKNOWN)
-		return -ESHUTDOWN;
-
-	spin_lock_irqsave(&cy_as_dev->lock, flags);
-
-	_req->status = -EINPROGRESS;
-	_req->actual = 0;
-
-	spin_unlock_irqrestore(&cy_as_dev->lock, flags);
-
-	/* Call Async functions */
-	if (as_ep->is_in) {
-		#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("<1>_cy_as_gadget: "
-				"cy_as_usb_write_data_async being called "
-				"on ep %d\n", as_ep->num);
-		#endif
-
-		ret = cy_as_usb_write_data_async(cy_as_dev->dev_handle,
-			as_ep->num, _req->length, _req->buf,
-			cy_false, cyasgadget_writecallback);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			cy_as_hal_print_message("<1>_cy_as_gadget: "
-				"cy_as_usb_write_data_async failed with "
-				"error code %d\n", ret);
-		else
-			_req->status = -EALREADY;
-	} else if (as_ep->num == 0) {
-		/*
-		ret = cy_as_usb_write_data_async(cy_as_dev->dev_handle,
-			as_ep->num, _req->length, _req->buf, cy_false,
-			cyasgadget_setupwritecallback);
-
-		if (ret != CY_AS_ERROR_SUCCESS)
-			cy_as_hal_print_message("<1>_cy_as_gadget: "
-				"cy_as_usb_write_data_async failed with error "
-				"code %d\n", ret);
-		*/
-		if ((cy_as_dev->outsetupreq) && (_req->length)) {
-			#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message("<1>_cy_as_gadget: "
-					"cy_as_usb_read_data_async "
-					"being called on ep %d\n",
-					as_ep->num);
-			#endif
-
-			ret = cy_as_usb_read_data_async (
-				cy_as_dev->dev_handle, as_ep->num,
-				cy_true, _req->length, _req->buf,
-				cyasgadget_setupreadcallback);
-
-			if (ret != CY_AS_ERROR_SUCCESS)
-				cy_as_hal_print_message("<1>_cy_as_gadget: "
-				"cy_as_usb_read_data_async failed with "
-				"error code %d\n", ret);
-
-		} else {
-			#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message("<1>_cy_as_gadget: "
-					"cy_as_usb_write_data_async "
-					"being called on ep %d\n",
-					as_ep->num);
-			#endif
-
-			ret = cy_as_usb_write_data_async(cy_as_dev->dev_handle,
-			as_ep->num, _req->length, _req->buf, cy_false,
-			cyasgadget_setupwritecallback);
-
-			if (ret != CY_AS_ERROR_SUCCESS)
-				cy_as_hal_print_message("<1>_cy_as_gadget: "
-				"cy_as_usb_write_data_async failed with "
-				"error code %d\n", ret);
-		}
-
-	} else if (list_empty(&as_ep->queue)) {
-		#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("<1>_cy_as_gadget: "
-				"cy_as_usb_read_data_async being called since "
-				"ep queue empty%d\n", ret);
-		#endif
-
-		ret = cy_as_usb_read_data_async(cy_as_dev->dev_handle,
-			as_ep->num, cy_false, _req->length, _req->buf,
-			cyasgadget_readcallback);
-		if (ret != CY_AS_ERROR_SUCCESS)
-			cy_as_hal_print_message("<1>_cy_as_gadget: "
-				"cy_as_usb_read_data_async failed with error "
-				"code %d\n", ret);
-		else
-			_req->status = -EALREADY;
-	}
-
-	spin_lock_irqsave(&cy_as_dev->lock, flags);
-
-	if (as_req)
-		list_add_tail(&as_req->queue, &as_ep->queue);
-
-	spin_unlock_irqrestore(&cy_as_dev->lock, flags);
-
-	return 0;
-}
-
-/* dequeue request */
-static int cyasgadget_dequeue(
-				struct usb_ep *_ep,
-				struct usb_request *_req
-				)
-{
-	cyasgadget_ep	*an_ep;
-	cyasgadget		*dev;
-	an_ep = container_of(_ep, cyasgadget_ep, usb_ep_inst);
-	dev = an_ep->dev;
-
-	#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-
-	cy_as_usb_cancel_async(dev->dev_handle, an_ep->num);
-
-	return 0;
-}
-
-static int cyasgadget_set_halt(
-				struct usb_ep *_ep,
-				int value
-				)
-{
-	cyasgadget_ep	*an_ep;
-	int			retval = 0;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-
-	an_ep = container_of(_ep, cyasgadget_ep, usb_ep_inst);
-	if (!_ep || (!an_ep->desc && an_ep->num != 0))
-		return -EINVAL;
-
-	if (!an_ep->dev->driver || an_ep->dev->gadget.speed ==
-		USB_SPEED_UNKNOWN)
-		return -ESHUTDOWN;
-
-	if (an_ep->desc /* not ep0 */ &&
-	(an_ep->desc->bmAttributes & 0x03) == USB_ENDPOINT_XFER_ISOC)
-		return -EINVAL;
-
-	if (!list_empty(&an_ep->queue))
-		retval = -EAGAIN;
-	else if (an_ep->is_in && value &&
-		cyasgadget_fifo_status(_ep) != 0)
-			retval = -EAGAIN;
-	else {
-		if (value) {
-			cy_as_usb_set_stall(an_ep->dev->dev_handle,
-				an_ep->num, cyasgadget_stallcallback, 0);
-		} else {
-			cy_as_usb_clear_stall(an_ep->dev->dev_handle,
-				an_ep->num, cyasgadget_stallcallback, 0);
-		}
-	}
-
-	return retval;
-}
-
-static int cyasgadget_fifo_status(
-				struct usb_ep *_ep
-				)
-{
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-
-	return 0;
-}
-
-static void cyasgadget_fifo_flush(
-				struct usb_ep *_ep
-				)
-{
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-}
-
-static struct usb_ep_ops cyasgadget_ep_ops = {
-	.enable		= cyasgadget_enable,
-	.disable	= cyasgadget_disable,
-	.alloc_request	= cyasgadget_alloc_request,
-	.free_request	= cyasgadget_free_request,
-	.queue		= cyasgadget_queue,
-	.dequeue	= cyasgadget_dequeue,
-	.set_halt	= cyasgadget_set_halt,
-	.fifo_status	= cyasgadget_fifo_status,
-	.fifo_flush	= cyasgadget_fifo_flush,
-};
-
-/*************************************************************/
-/*This subsection contains all usb_gadget_ops cyasgadget_ops */
-/*************************************************************/
-static int cyasgadget_get_frame(
-				struct usb_gadget *_gadget
-				)
-{
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-	return 0;
-}
-
-static int cyasgadget_wakeup(
-					struct usb_gadget *_gadget
-					)
-{
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-	return 0;
-}
-
-static int cyasgadget_set_selfpowered(
-					struct usb_gadget *_gadget,
-					int value
-					)
-{
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-	return 0;
-}
-
-static int cyasgadget_pullup(
-					struct usb_gadget *_gadget,
-					int is_on
-					)
-{
-	struct cyasgadget  *cy_as_dev;
-	unsigned long   flags;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-
-	if (!_gadget)
-		return -ENODEV;
-
-	cy_as_dev = container_of(_gadget, cyasgadget, gadget);
-
-	spin_lock_irqsave(&cy_as_dev->lock, flags);
-	cy_as_dev->softconnect = (is_on != 0);
-	if (is_on)
-		cy_as_usb_connect(cy_as_dev->dev_handle, 0, 0);
-	else
-		cy_as_usb_disconnect(cy_as_dev->dev_handle, 0, 0);
-
-	spin_unlock_irqrestore(&cy_as_dev->lock, flags);
-
-	return 0;
-}
-
-static int cyasgadget_ioctl(
-					struct usb_gadget *_gadget,
-					unsigned code,
-					unsigned long param
-					)
-{
-	int err = 0;
-	int retval = 0;
-	int ret_stat = 0;
-	cyasgadget *dev = cy_as_gadget_controller;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called, code=%d, param=%ld\n",
-		__func__, code, param);
-	#endif
-	/*
-	 * extract the type and number bitfields, and don't decode
-	 * wrong cmds: return ENOTTY (inappropriate ioctl) before access_ok()
-	 */
-	if (_IOC_TYPE(code) != CYASGADGET_IOC_MAGIC) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s, bad magic number = 0x%x\n",
-			__func__, _IOC_TYPE(code));
-		#endif
-		return -ENOTTY;
-	}
-
-	if (_IOC_NR(code) > CYASGADGET_IOC_MAXNR) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s, bad ioctl code = 0x%x\n",
-			__func__, _IOC_NR(code));
-		#endif
-		return -ENOTTY;
-	}
-
-	/*
-	 * the direction is a bitmask, and VERIFY_WRITE catches R/W
-	 * transfers. `Type' is user-oriented, while
-	 * access_ok is kernel-oriented, so the concept of "read" and
-	 * "write" is reversed
-	 */
-	if (_IOC_DIR(code) & _IOC_READ)
-		err = !access_ok(VERIFY_WRITE,
-			(void __user *)param, _IOC_SIZE(code));
-	else if (_IOC_DIR(code) & _IOC_WRITE)
-		err =  !access_ok(VERIFY_READ,
-			(void __user *)param, _IOC_SIZE(code));
-
-	if (err) {
-		cy_as_hal_print_message("%s, bad ioctl dir = 0x%x\n",
-			__func__, _IOC_DIR(code));
-		return -EFAULT;
-	}
-
-	switch (code) {
-	case CYASGADGET_GETMTPSTATUS:
-		{
-		cy_as_gadget_ioctl_tmtp_status *usr_d =
-			(cy_as_gadget_ioctl_tmtp_status *)param;
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: got CYASGADGET_GETMTPSTATUS\n",
-			__func__);
-		#endif
-
-		retval = __put_user(dev->tmtp_send_complete,
-			(uint32_t __user *)(&(usr_d->tmtp_send_complete)));
-		retval = __put_user(dev->tmtp_get_complete,
-			(uint32_t __user *)(&(usr_d->tmtp_get_complete)));
-		retval = __put_user(dev->tmtp_need_new_blk_tbl,
-			(uint32_t __user *)(&(usr_d->tmtp_need_new_blk_tbl)));
-
-		if (copy_to_user((&(usr_d->tmtp_send_complete_data)),
-			(&(dev->tmtp_send_complete_data)),
-			sizeof(cy_as_gadget_ioctl_send_object)))
-			return -EFAULT;
-
-		if (copy_to_user((&(usr_d->tmtp_get_complete_data)),
-			(&(dev->tmtp_get_complete_data)),
-			sizeof(cy_as_gadget_ioctl_get_object)))
-			return -EFAULT;
-		break;
-		}
-	case CYASGADGET_CLEARTMTPSTATUS:
-		{
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s got CYASGADGET_CLEARTMTPSTATUS\n",
-			__func__);
-		#endif
-
-		dev->tmtp_send_complete = 0;
-		dev->tmtp_get_complete = 0;
-		dev->tmtp_need_new_blk_tbl = 0;
-
-		break;
-		}
-	case CYASGADGET_INITSOJ:
-		{
-		cy_as_gadget_ioctl_i_s_o_j_d k_d;
-		cy_as_gadget_ioctl_i_s_o_j_d *usr_d =
-			(cy_as_gadget_ioctl_i_s_o_j_d *)param;
-		cy_as_mtp_block_table blk_table;
-		struct scatterlist sg;
-		char *alloc_filename;
-		struct file *file_to_allocate;
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s got CYASGADGET_INITSOJ\n",
-			__func__);
-		#endif
-
-		memset(&blk_table, 0, sizeof(blk_table));
-
-		/* Get user argument structure  */
-		if (copy_from_user(&k_d, usr_d,
-			sizeof(cy_as_gadget_ioctl_i_s_o_j_d)))
-			return -EFAULT;
-
-		/* better use fixed size buff*/
-		alloc_filename = kmalloc(k_d.name_length + 1, GFP_KERNEL);
-		if (alloc_filename == NULL)
-			return -ENOMEM;
-
-		/* get the filename */
-		if (copy_from_user(alloc_filename, k_d.file_name,
-			k_d.name_length + 1)) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("%s: CYASGADGET_INITSOJ, "
-				"copy file name from user space failed\n",
-				__func__);
-			#endif
-			kfree(alloc_filename);
-			return -EFAULT;
-		}
-
-		file_to_allocate = filp_open(alloc_filename, O_RDWR, 0);
-
-		if (!IS_ERR(file_to_allocate)) {
-
-			struct address_space *mapping =
-				file_to_allocate->f_mapping;
-			const struct address_space_operations *a_ops =
-				mapping->a_ops;
-			struct inode *inode = mapping->host;
-			struct inode *alloc_inode =
-				file_to_allocate->f_path.dentry->d_inode;
-			uint32_t num_clusters = 0;
-			struct buffer_head bh;
-			struct kstat stat;
-			int nr_pages = 0;
-			int ret_stat = 0;
-
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("%s: fhandle is OK, "
-				"calling vfs_getattr\n", __func__);
-			#endif
-
-			ret_stat = vfs_getattr(file_to_allocate->f_path.mnt,
-				file_to_allocate->f_path.dentry, &stat);
-
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("%s: returned from "
-				"vfs_getattr() stat->blksize=0x%lx\n",
-				__func__, stat.blksize);
-			#endif
-
-			/* TODO:  get this from disk properties
-			 * (from blockdevice)*/
-			#define SECTOR_SIZE 512
-			if (stat.blksize != 0) {
-				num_clusters = (k_d.num_bytes) / SECTOR_SIZE;
-
-				if (((k_d.num_bytes) % SECTOR_SIZE) != 0)
-						num_clusters++;
-			} else {
-				goto initsoj_safe_exit;
-			}
-
-			bh.b_state = 0;
-			bh.b_blocknr = 0;
-			/* block size is arbitrary , we'll use sector size*/
-			bh.b_size = SECTOR_SIZE;
-
-
-
-			/* clear dirty pages in page cache
-			 * (if were any allocated) */
-			nr_pages = (k_d.num_bytes) / (PAGE_CACHE_SIZE);
-
-			if (((k_d.num_bytes) % (PAGE_CACHE_SIZE)) != 0)
-				nr_pages++;
-
-			#ifndef WESTBRIDGE_NDEBUG
-			/*check out how many pages where actually allocated */
-			if (mapping->nrpages != nr_pages)
-				cy_as_hal_print_message("%s mpage_cleardirty "
-					"mapping->nrpages %d != num_pages %d\n",
-					__func__, (int) mapping->nrpages,
-					nr_pages);
-
-				cy_as_hal_print_message("%s: calling "
-					"mpage_cleardirty() "
-					"for %d pages\n", __func__, nr_pages);
-			#endif
-
-			ret_stat = mpage_cleardirty(mapping, nr_pages);
-
-			/*fill up the the block table from the addr mapping  */
-			if (a_ops->bmap) {
-				int8_t blk_table_idx = -1;
-				uint32_t file_block_idx = 0;
-				uint32_t last_blk_addr_map = 0,
-					curr_blk_addr_map = 0;
-
-				#ifndef WESTBRIDGE_NDEBUG
-				if (alloc_inode->i_bytes == 0)
-						cy_as_hal_print_message(
-						"%s: alloc_inode->ibytes =0\n",
-						__func__);
-				#endif
-
-				/* iterate through the list of
-				 * blocks (not clusters)*/
-				for (file_block_idx = 0;
-					file_block_idx < num_clusters
-					/*inode->i_bytes*/; file_block_idx++) {
-
-					/* returns starting sector number */
-					curr_blk_addr_map =
-						a_ops->bmap(mapping,
-							file_block_idx);
-
-					/*no valid mapping*/
-					if (curr_blk_addr_map == 0) {
-						#ifndef WESTBRIDGE_NDEBUG
-						cy_as_hal_print_message(
-							"%s:hit invalid "
-							"mapping\n", __func__);
-						#endif
-						break;
-					} else if (curr_blk_addr_map !=
-						(last_blk_addr_map + 1) ||
-						(blk_table.num_blocks
-						[blk_table_idx] == 65535)) {
-
-						/* next table entry */
-						blk_table_idx++;
-						/* starting sector of a
-						 * scattered cluster*/
-						blk_table.start_blocks
-							[blk_table_idx] =
-							curr_blk_addr_map;
-						/* ++ num of blocks in cur
-						 * table entry*/
-						blk_table.
-						num_blocks[blk_table_idx]++;
-
-						#ifndef WESTBRIDGE_NDEBUG
-						if (file_block_idx != 0)
-							cy_as_hal_print_message(
-							 "<*> next table "
-							 "entry:%d required\n",
-							 blk_table_idx);
-						#endif
-					} else {
-						/*add contiguous block*/
-						blk_table.num_blocks
-						[blk_table_idx]++;
-					} /*if (curr_blk_addr_map == 0)*/
-
-					last_blk_addr_map = curr_blk_addr_map;
-				} /* end for (file_block_idx = 0; file_block_idx
-				< inode->i_bytes;) */
-
-				#ifndef WESTBRIDGE_NDEBUG
-				/*print result for verification*/
-				{
-					int i;
-					cy_as_hal_print_message(
-						"%s: print block table "
-						"mapping:\n",
-						__func__);
-					for (i = 0; i <= blk_table_idx; i++) {
-						cy_as_hal_print_message(
-						"<1> %d 0x%x 0x%x\n", i,
-						blk_table.start_blocks[i],
-						blk_table.num_blocks[i]);
-					}
-				}
-				#endif
-
-				/* copy the block table to user
-				 * space (for debug purposes) */
-				retval = __put_user(
-					blk_table.start_blocks[blk_table_idx],
-					(uint32_t __user *)
-						(&(usr_d->blk_addr_p)));
-
-				retval = __put_user(
-					blk_table.num_blocks[blk_table_idx],
-					(uint32_t __user *)
-						(&(usr_d->blk_count_p)));
-
-				blk_table_idx++;
-				retval = __put_user(blk_table_idx,
-					(uint32_t __user *)
-						(&(usr_d->item_count)));
-
-			} /*end if (a_ops->bmap)*/
-
-			filp_close(file_to_allocate, NULL);
-
-			dev->tmtp_send_complete = 0;
-			dev->tmtp_need_new_blk_tbl = 0;
-
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-				"%s: calling cy_as_mtp_init_send_object()\n",
-				__func__);
-			#endif
-			sg_init_one(&sg, &blk_table, sizeof(blk_table));
-			ret_stat = cy_as_mtp_init_send_object(dev->dev_handle,
-				(cy_as_mtp_block_table *)&sg,
-				k_d.num_bytes, 0, 0);
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("%s: returned from "
-				"cy_as_mtp_init_send_object()\n", __func__);
-			#endif
-
-		}
-		#ifndef WESTBRIDGE_NDEBUG
-		else {
-			cy_as_hal_print_message(
-				"%s: failed to allocate the file %s\n",
-				__func__, alloc_filename);
-		} /* end if (file_to_allocate)*/
-		#endif
-		kfree(alloc_filename);
-initsoj_safe_exit:
-			ret_stat = 0;
-			retval = __put_user(ret_stat,
-				(uint32_t __user *)(&(usr_d->ret_val)));
-
-			break;
-		}
-	case CYASGADGET_INITGOJ:
-		{
-		cy_as_gadget_ioctl_i_g_o_j_d k_d;
-		cy_as_gadget_ioctl_i_g_o_j_d *usr_d =
-			(cy_as_gadget_ioctl_i_g_o_j_d *)param;
-		cy_as_mtp_block_table blk_table;
-		struct scatterlist sg;
-		char *map_filename;
-		struct file *file_to_map;
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message(
-			"%s: got CYASGADGET_INITGOJ\n",
-				__func__);
-		#endif
-
-		memset(&blk_table, 0, sizeof(blk_table));
-
-		/* Get user argument sturcutre */
-		if (copy_from_user(&k_d, usr_d,
-			sizeof(cy_as_gadget_ioctl_i_g_o_j_d)))
-				return -EFAULT;
-
-		map_filename = kmalloc(k_d.name_length + 1, GFP_KERNEL);
-		if (map_filename == NULL)
-			return -ENOMEM;
-		if (copy_from_user(map_filename, k_d.file_name,
-			k_d.name_length + 1)) {
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message("%s: copy file name from "
-				"user space failed\n", __func__);
-			#endif
-			kfree(map_filename);
-			return -EFAULT;
-		}
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("<*>%s: opening %s for kernel "
-			"mode access map\n", __func__, map_filename);
-		#endif
-		file_to_map = filp_open(map_filename, O_RDWR, 0);
-		if (file_to_map) {
-			struct address_space *mapping = file_to_map->f_mapping;
-			const struct address_space_operations
-				*a_ops = mapping->a_ops;
-			struct inode *inode = mapping->host;
-
-			int8_t blk_table_idx = -1;
-			uint32_t file_block_idx = 0;
-			uint32_t last_blk_addr_map = 0, curr_blk_addr_map = 0;
-
-			/*verify operation exists*/
-			if (a_ops->bmap) {
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-					"<*>%s: bmap found, i_bytes=0x%x, "
-					"i_size=0x%x, i_blocks=0x%x\n",
-					__func__, inode->i_bytes,
-					(unsigned int) inode->i_size,
-					(unsigned int) inode->i_blocks);
-				#endif
-
-				k_d.num_bytes = inode->i_size;
-
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-					"<*>%s: k_d.num_bytes=0x%x\n",
-					__func__, k_d.num_bytes);
-				#endif
-
-				for (file_block_idx = 0;
-					file_block_idx < inode->i_size;
-					file_block_idx++) {
-					curr_blk_addr_map =
-						a_ops->bmap(mapping,
-							file_block_idx);
-
-					if (curr_blk_addr_map == 0) {
-						/*no valid mapping*/
-						#ifndef WESTBRIDGE_NDEBUG
-						cy_as_hal_print_message(
-							"%s: no valid "
-							"mapping\n", __func__);
-						#endif
-						break;
-					} else if (curr_blk_addr_map !=
-					(last_blk_addr_map + 1)) {
-						/*non-contiguous break*/
-						blk_table_idx++;
-						blk_table.start_blocks
-							[blk_table_idx] =
-							curr_blk_addr_map;
-						blk_table.num_blocks
-							[blk_table_idx]++;
-						#ifndef WESTBRIDGE_NDEBUG
-						cy_as_hal_print_message(
-							"%s: found non-"
-							"contiguous break",
-							__func__);
-						#endif
-					} else {
-						/*add contiguous block*/
-						blk_table.num_blocks
-							[blk_table_idx]++;
-					}
-					last_blk_addr_map = curr_blk_addr_map;
-				}
-
-				/*print result for verification*/
-				#ifndef WESTBRIDGE_NDEBUG
-				{
-					int i = 0;
-
-					for (i = 0; i <= blk_table_idx; i++) {
-						cy_as_hal_print_message(
-						"%s %d 0x%x 0x%x\n",
-						__func__, i,
-						blk_table.start_blocks[i],
-						blk_table.num_blocks[i]);
-					}
-				}
-				#endif
-			} else {
-				#ifndef WESTBRIDGE_NDEBUG
-				cy_as_hal_print_message(
-					"%s: could not find "
-					"a_ops->bmap\n", __func__);
-				#endif
-				return -EFAULT;
-			}
-
-			filp_close(file_to_map, NULL);
-
-			dev->tmtp_get_complete = 0;
-			dev->tmtp_need_new_blk_tbl = 0;
-
-			ret_stat = __put_user(
-				blk_table.start_blocks[blk_table_idx],
-				(uint32_t __user *)(&(usr_d->blk_addr_p)));
-
-			ret_stat = __put_user(
-				blk_table.num_blocks[blk_table_idx],
-				(uint32_t __user *)(&(usr_d->blk_count_p)));
-
-			sg_init_one(&sg, &blk_table, sizeof(blk_table));
-
-			#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-				"%s: calling cy_as_mtp_init_get_object() "
-				"start=0x%x, num =0x%x, tid=0x%x, "
-				"num_bytes=0x%x\n",
-				__func__,
-				blk_table.start_blocks[0],
-				blk_table.num_blocks[0],
-				k_d.tid,
-				k_d.num_bytes);
-			#endif
-
-			ret_stat = cy_as_mtp_init_get_object(
-				dev->dev_handle,
-				(cy_as_mtp_block_table *)&sg,
-				k_d.num_bytes, k_d.tid, 0, 0);
-			if (ret_stat != CY_AS_ERROR_SUCCESS) {
-					#ifndef WESTBRIDGE_NDEBUG
-					cy_as_hal_print_message(
-						"%s: cy_as_mtp_init_get_object "
-						"failed ret_stat=0x%x\n",
-						__func__, ret_stat);
-					#endif
-			}
-		}
-		#ifndef WESTBRIDGE_NDEBUG
-		else {
-				cy_as_hal_print_message(
-					"%s: failed to open file %s\n",
-					__func__, map_filename);
-		}
-		#endif
-		kfree(map_filename);
-
-		ret_stat = 0;
-		retval = __put_user(ret_stat, (uint32_t __user *)
-			(&(usr_d->ret_val)));
-		break;
-		}
-	case CYASGADGET_CANCELSOJ:
-		{
-		cy_as_gadget_ioctl_cancel *usr_d =
-			(cy_as_gadget_ioctl_cancel *)param;
-
-		#ifndef WESTBRIDGE_NDEBUG
-			cy_as_hal_print_message(
-				"%s: got CYASGADGET_CANCELSOJ\n",
-				__func__);
-		#endif
-
-		ret_stat = cy_as_mtp_cancel_send_object(dev->dev_handle, 0, 0);
-
-		retval = __put_user(ret_stat, (uint32_t __user *)
-			(&(usr_d->ret_val)));
-		break;
-		}
-	case CYASGADGET_CANCELGOJ:
-		{
-		cy_as_gadget_ioctl_cancel *usr_d =
-			(cy_as_gadget_ioctl_cancel *)param;
-
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: got CYASGADGET_CANCELGOJ\n",
-			__func__);
-		#endif
-
-		ret_stat = cy_as_mtp_cancel_get_object(dev->dev_handle, 0, 0);
-
-		retval = __put_user(ret_stat,
-			(uint32_t __user *)(&(usr_d->ret_val)));
-		break;
-		}
-	default:
-		{
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: unknown ioctl received: %d\n",
-			__func__, code);
-
-		cy_as_hal_print_message("%s: known codes:\n"
-			"CYASGADGET_GETMTPSTATUS=%d\n"
-			"CYASGADGET_CLEARTMTPSTATUS=%d\n"
-			"CYASGADGET_INITSOJ=%d\n"
-			"CYASGADGET_INITGOJ=%d\n"
-			"CYASGADGET_CANCELSOJ=%d\n"
-			"CYASGADGET_CANCELGOJ=%d\n",
-			__func__,
-			CYASGADGET_GETMTPSTATUS,
-			CYASGADGET_CLEARTMTPSTATUS,
-			CYASGADGET_INITSOJ,
-			CYASGADGET_INITGOJ,
-			CYASGADGET_CANCELSOJ,
-			CYASGADGET_CANCELGOJ);
-		#endif
-		break;
-		}
-	}
-
-	return 0;
-}
-
-static int cyasgadget_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
-static int cyasgadget_stop(struct usb_gadget_driver *driver);
-
-static const struct usb_gadget_ops cyasgadget_ops = {
-	.get_frame		 = cyasgadget_get_frame,
-	.wakeup		 = cyasgadget_wakeup,
-	.set_selfpowered = cyasgadget_set_selfpowered,
-	.pullup		 = cyasgadget_pullup,
-	.ioctl	   = cyasgadget_ioctl,
-	.start		= cyasgadget_start,
-	.stop		= cyasgadget_stop,
-};
-
-
-/* keeping it simple:
- * - one bus driver, initted first;
- * - one function driver, initted second
- *
- * most of the work to support multiple controllers would
- * be to associate this gadget driver with all of them, or
- * perhaps to bind specific drivers to specific devices.
- */
-
-static void cyas_ep_reset(
-				cyasgadget_ep *an_ep
-				)
-{
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-
-	an_ep->desc = NULL;
-	INIT_LIST_HEAD(&an_ep->queue);
-
-	an_ep->stopped = 0;
-	an_ep->is_in   = 0;
-	an_ep->is_iso  = 0;
-	an_ep->usb_ep_inst.maxpacket = ~0;
-	an_ep->usb_ep_inst.ops = &cyasgadget_ep_ops;
-}
-
-static void cyas_usb_reset(
-				cyasgadget *cy_as_dev
-				)
-{
-	cy_as_return_status_t ret;
-	cy_as_usb_enum_control config;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_device *dev_p = (cy_as_device *)cy_as_dev->dev_handle;
-
-	cy_as_hal_print_message("<1>%s called mtp_firmware=0x%x\n",
-		__func__, dev_p->is_mtp_firmware);
-	#endif
-
-	ret = cy_as_misc_release_resource(cy_as_dev->dev_handle,
-		cy_as_bus_u_s_b);
-	if (ret != CY_AS_ERROR_SUCCESS && ret !=
-		CY_AS_ERROR_RESOURCE_NOT_OWNED) {
-		cy_as_hal_print_message("<1>_cy_as_gadget: cannot "
-			"release usb resource: failed with error code %d\n",
-			ret);
-		return;
-	}
-
-	cy_as_dev->gadget.speed = USB_SPEED_HIGH;
-
-	ret = cy_as_usb_start(cy_as_dev->dev_handle, 0, 0);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_hal_print_message("<1>_cy_as_gadget: "
-			"cy_as_usb_start failed with error code %d\n",
-			ret);
-		return;
-	}
-	/* P port will do enumeration, not West Bridge */
-	config.antioch_enumeration = cy_false;
-	/*  1  2  : 1-BUS_NUM , 2:Storage_device number, SD - is bus 1*/
-
-	/* TODO: add module param to enumerate mass storage */
-	config.mass_storage_interface = 0;
-
-	if (append_mtp) {
-		ret = cy_as_mtp_start(cy_as_dev->dev_handle,
-			cy_as_gadget_mtp_event_callback, 0, 0);
-		if (ret == CY_AS_ERROR_SUCCESS)  {
-			cy_as_hal_print_message("MTP start passed, enumerating "
-				"MTP interface\n");
-			config.mtp_interface = append_mtp;
-			/*Do not enumerate NAND storage*/
-			config.devices_to_enumerate[0][0] = cy_false;
-
-			/*enumerate SD storage as MTP*/
-			config.devices_to_enumerate[1][0] = cy_true;
-		}
-	} else {
-		cy_as_hal_print_message("MTP start not attempted, not "
-			"enumerating MTP interface\n");
-		config.mtp_interface = 0;
-		/* enumerate mass storage based on module parameters */
-		config.devices_to_enumerate[0][0] = msc_enum_bus_0;
-		config.devices_to_enumerate[1][0] = msc_enum_bus_1;
-	}
-
-	ret = cy_as_usb_set_enum_config(cy_as_dev->dev_handle,
-		&config, 0, 0);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_hal_print_message("<1>_cy_as_gadget: "
-			"cy_as_usb_set_enum_config failed with error "
-			"code %d\n", ret);
-		return;
-	}
-
-	cy_as_usb_set_physical_configuration(cy_as_dev->dev_handle, 1);
-
-}
-
-static void cyas_usb_reinit(
-				cyasgadget *cy_as_dev
-				)
-{
-	int index = 0;
-	cyasgadget_ep *an_ep_p;
-	cy_as_return_status_t ret;
-	cy_as_device *dev_p = (cy_as_device *)cy_as_dev->dev_handle;
-
-	INIT_LIST_HEAD(&cy_as_dev->gadget.ep_list);
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called, is_mtp_firmware = "
-		"0x%x\n", __func__, dev_p->is_mtp_firmware);
-	#endif
-
-	/* Init the end points */
-	for (index = 1; index <= 15; index++) {
-		an_ep_p = &cy_as_dev->an_gadget_ep[index];
-		cyas_ep_reset(an_ep_p);
-		an_ep_p->usb_ep_inst.name = cy_as_ep_names[index];
-		an_ep_p->dev = cy_as_dev;
-		an_ep_p->num = index;
-		memset(&an_ep_p->cyepconfig, 0, sizeof(an_ep_p->cyepconfig));
-
-		/* EP0, EPs 2,4,6,8 need not be added */
-		if ((index <= 8) && (index % 2 == 0) &&
-			(!dev_p->is_mtp_firmware)) {
-			/* EP0 is 64 and EPs 2,4,6,8 not allowed */
-			cy_as_dev->an_gadget_ep[index].fifo_size = 0;
-		} else {
-			if (index == 1)
-				an_ep_p->fifo_size = 64;
-			else
-				an_ep_p->fifo_size = 512;
-			list_add_tail(&an_ep_p->usb_ep_inst.ep_list,
-				&cy_as_dev->gadget.ep_list);
-		}
-	}
-	/* need to setendpointconfig before usb connect, this is not
-	 * quite compatible with gadget methodology (ep_enable called
-	 * by gadget after connect), therefore need to set config in
-	 * initialization and verify compatibility in ep_enable,
-	 * kick up error otherwise*/
-	an_ep_p = &cy_as_dev->an_gadget_ep[3];
-	an_ep_p->cyepconfig.enabled = cy_true;
-	an_ep_p->cyepconfig.dir = cy_as_usb_out;
-	an_ep_p->cyepconfig.type = cy_as_usb_bulk;
-	an_ep_p->cyepconfig.size = 0;
-	an_ep_p->cyepconfig.physical = 1;
-	ret = cy_as_usb_set_end_point_config(an_ep_p->dev->dev_handle,
-		3, &an_ep_p->cyepconfig);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_hal_print_message("cy_as_usb_set_end_point_config "
-			"failed with error code %d\n", ret);
-	}
-
-	cy_as_usb_set_stall(an_ep_p->dev->dev_handle, 3, 0, 0);
-
-	an_ep_p = &cy_as_dev->an_gadget_ep[5];
-	an_ep_p->cyepconfig.enabled = cy_true;
-	an_ep_p->cyepconfig.dir = cy_as_usb_in;
-	an_ep_p->cyepconfig.type = cy_as_usb_bulk;
-	an_ep_p->cyepconfig.size = 0;
-	an_ep_p->cyepconfig.physical = 2;
-	ret = cy_as_usb_set_end_point_config(an_ep_p->dev->dev_handle,
-		5, &an_ep_p->cyepconfig);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_hal_print_message("cy_as_usb_set_end_point_config "
-			"failed with error code %d\n", ret);
-	}
-
-	cy_as_usb_set_stall(an_ep_p->dev->dev_handle, 5, 0, 0);
-
-	an_ep_p = &cy_as_dev->an_gadget_ep[9];
-	an_ep_p->cyepconfig.enabled = cy_true;
-	an_ep_p->cyepconfig.dir = cy_as_usb_in;
-	an_ep_p->cyepconfig.type = cy_as_usb_bulk;
-	an_ep_p->cyepconfig.size = 0;
-	an_ep_p->cyepconfig.physical = 4;
-	ret = cy_as_usb_set_end_point_config(an_ep_p->dev->dev_handle,
-		9, &an_ep_p->cyepconfig);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		cy_as_hal_print_message("cy_as_usb_set_end_point_config "
-			"failed with error code %d\n", ret);
-	}
-
-	cy_as_usb_set_stall(an_ep_p->dev->dev_handle, 9, 0, 0);
-
-	if (dev_p->mtp_count != 0) {
-		/* these need to be set for compatibility with
-		 * the gadget_enable logic */
-		an_ep_p = &cy_as_dev->an_gadget_ep[2];
-		an_ep_p->cyepconfig.enabled = cy_true;
-		an_ep_p->cyepconfig.dir = cy_as_usb_out;
-		an_ep_p->cyepconfig.type = cy_as_usb_bulk;
-		an_ep_p->cyepconfig.size = 0;
-		an_ep_p->cyepconfig.physical = 0;
-		cy_as_usb_set_stall(an_ep_p->dev->dev_handle, 2, 0, 0);
-
-		an_ep_p = &cy_as_dev->an_gadget_ep[6];
-		an_ep_p->cyepconfig.enabled = cy_true;
-		an_ep_p->cyepconfig.dir = cy_as_usb_in;
-		an_ep_p->cyepconfig.type = cy_as_usb_bulk;
-		an_ep_p->cyepconfig.size = 0;
-		an_ep_p->cyepconfig.physical = 0;
-		cy_as_usb_set_stall(an_ep_p->dev->dev_handle, 6, 0, 0);
-	}
-
-	cyas_ep_reset(&cy_as_dev->an_gadget_ep[0]);
-	cy_as_dev->an_gadget_ep[0].usb_ep_inst.name = cy_as_ep_names[0];
-	cy_as_dev->an_gadget_ep[0].dev = cy_as_dev;
-	cy_as_dev->an_gadget_ep[0].num = 0;
-	cy_as_dev->an_gadget_ep[0].fifo_size = 64;
-
-	cy_as_dev->an_gadget_ep[0].usb_ep_inst.maxpacket = 64;
-	cy_as_dev->gadget.ep0 = &cy_as_dev->an_gadget_ep[0].usb_ep_inst;
-	cy_as_dev->an_gadget_ep[0].stopped = 0;
-	INIT_LIST_HEAD(&cy_as_dev->gadget.ep0->ep_list);
-}
-
-static void cyas_ep0_start(
-				cyasgadget *dev
-				)
-{
-	cy_as_return_status_t ret;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-
-	ret = cy_as_usb_register_callback(dev->dev_handle,
-		cy_as_gadget_usb_event_callback);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: cy_as_usb_register_callback "
-			"failed with error code %d\n", __func__, ret);
-		#endif
-		return;
-	}
-
-	ret = cy_as_usb_commit_config(dev->dev_handle, 0, 0);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: cy_as_usb_commit_config "
-			"failed with error code %d\n", __func__, ret);
-		#endif
-		return;
-	}
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("%s: cy_as_usb_commit_config "
-		"message sent\n", __func__);
-	#endif
-
-	ret = cy_as_usb_connect(dev->dev_handle, 0, 0);
-	if (ret != CY_AS_ERROR_SUCCESS) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s: cy_as_usb_connect failed "
-			"with error code %d\n", __func__, ret);
-		#endif
-		return;
-	}
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("%s: cy_as_usb_connect message "
-		"sent\n", __func__);
-	#endif
-}
-
-/*
- * When a driver is successfully registered, it will receive
- * control requests including set_configuration(), which enables
- * non-control requests.  then usb traffic follows until a
- * disconnect is reported.  then a host may connect again, or
- * the driver might get unbound.
- */
-static int cyasgadget_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
-{
-	cyasgadget *dev = cy_as_gadget_controller;
-	int		retval;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called driver=0x%x\n",
-		__func__, (unsigned int) driver);
-	#endif
-
-	/* insist on high speed support from the driver, since
-	* "must not be used in normal operation"
-	*/
-	if (!driver
-		|| !bind
-		|| !driver->unbind
-		|| !driver->setup)
-		return -EINVAL;
-
-	if (!dev)
-		return -ENODEV;
-
-	if (dev->driver)
-		return -EBUSY;
-
-	/* hook up the driver ... */
-	dev->softconnect = 1;
-	driver->driver.bus = NULL;
-	dev->driver = driver;
-	dev->gadget.dev.driver = &driver->driver;
-
-	/* Do the needful */
-	cyas_usb_reset(dev); /* External usb */
-	cyas_usb_reinit(dev); /* Internal */
-
-	retval = bind(&dev->gadget);
-	if (retval) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("%s bind to driver %s --> %d\n",
-			__func__, driver->driver.name, retval);
-		#endif
-
-		dev->driver = NULL;
-		dev->gadget.dev.driver = NULL;
-		return retval;
-	}
-
-	/* ... then enable host detection and ep0; and we're ready
-	* for set_configuration as well as eventual disconnect.
-	*/
-	cyas_ep0_start(dev);
-
-	return 0;
-}
-
-static void cyasgadget_nuke(
-							cyasgadget_ep *an_ep
-							)
-{
-	cyasgadget	*dev = cy_as_gadget_controller;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-
-	cy_as_usb_cancel_async(dev->dev_handle, an_ep->num);
-	an_ep->stopped = 1;
-
-	while (!list_empty(&an_ep->queue)) {
-		cyasgadget_req *an_req = list_entry
-			(an_ep->queue.next, cyasgadget_req, queue);
-		list_del_init(&an_req->queue);
-		an_req->req.status = -ESHUTDOWN;
-		an_req->req.complete(&an_ep->usb_ep_inst, &an_req->req);
-	}
-}
-
-static void cyasgadget_stop_activity(
-				cyasgadget *dev,
-				struct usb_gadget_driver *driver
-				)
-{
-	int index;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-
-	/* don't disconnect if it's not connected */
-	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
-		driver = NULL;
-
-	if (spin_is_locked(&dev->lock))
-		spin_unlock(&dev->lock);
-
-	/* Stop hardware; prevent new request submissions;
-	 * and kill any outstanding requests.
-	 */
-	cy_as_usb_disconnect(dev->dev_handle, 0, 0);
-
-	for (index = 3; index <= 7; index += 2) {
-		cyasgadget_ep *an_ep_p = &dev->an_gadget_ep[index];
-		cyasgadget_nuke(an_ep_p);
-	}
-
-	for (index = 9; index <= 15; index++) {
-		cyasgadget_ep *an_ep_p = &dev->an_gadget_ep[index];
-		cyasgadget_nuke(an_ep_p);
-	}
-
-	/* report disconnect; the driver is already quiesced */
-	if (driver)
-		driver->disconnect(&dev->gadget);
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("cy_as_usb_disconnect returned success");
-	#endif
-
-	/* Stop Usb */
-	cy_as_usb_stop(dev->dev_handle, 0, 0);
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("cy_as_usb_stop returned success");
-	#endif
-}
-
-static int cyasgadget_stop(
-				struct usb_gadget_driver *driver
-				)
-{
-	cyasgadget	*dev = cy_as_gadget_controller;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-
-	if (!dev)
-		return -ENODEV;
-
-	if (!driver || driver != dev->driver)
-		return -EINVAL;
-
-	cyasgadget_stop_activity(dev, driver);
-
-	driver->unbind(&dev->gadget);
-	dev->gadget.dev.driver = NULL;
-	dev->driver = NULL;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("unregistered driver '%s'\n",
-		driver->driver.name);
-	#endif
-
-	return 0;
-}
-
-static void cyas_gadget_release(
-				struct device *_dev
-				)
-{
-	cyasgadget *dev = dev_get_drvdata(_dev);
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>%s called\n", __func__);
-	#endif
-
-	kfree(dev);
-}
-
-/* DeInitialize gadget driver  */
-static void cyasgadget_deinit(
-			cyasgadget *cy_as_dev
-			)
-{
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>_cy_as_gadget deinitialize called\n");
-	#endif
-
-	if (!cy_as_dev) {
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("<1>_cy_as_gadget_deinit: "
-			"invalid cyasgadget device\n");
-		#endif
-		return;
-	}
-	usb_del_gadget_udc(&cy_as_dev->gadget);
-
-	if (cy_as_dev->driver) {
-		/* should have been done already by driver model core */
-		#ifndef WESTBRIDGE_NDEBUG
-		cy_as_hal_print_message("<1> cy_as_gadget: '%s' "
-			"is still registered\n",
-			cy_as_dev->driver->driver.name);
-		#endif
-		usb_gadget_unregister_driver(cy_as_dev->driver);
-	}
-
-	kfree(cy_as_dev);
-	cy_as_gadget_controller = NULL;
-}
-
-/* Initialize gadget driver  */
-static int cyasgadget_initialize(void)
-{
-	cyasgadget *cy_as_dev = 0;
-	int		 retval = 0;
-
-	#ifndef WESTBRIDGE_NDEBUG
-	cy_as_hal_print_message("<1>_cy_as_gadget [V1.1] initialize called\n");
-	#endif
-
-	if (cy_as_gadget_controller != 0) {
-		cy_as_hal_print_message("<1> cy_as_gadget: the device has "
-			"already been initilaized. ignoring\n");
-		return -EBUSY;
-	}
-
-	cy_as_dev = kzalloc(sizeof(cyasgadget), GFP_ATOMIC);
-	if (cy_as_dev == NULL) {
-		cy_as_hal_print_message("<1> cy_as_gadget: memory "
-			"allocation failed\n");
-		return -ENOMEM;
-	}
-
-	spin_lock_init(&cy_as_dev->lock);
-	cy_as_dev->gadget.ops = &cyasgadget_ops;
-	cy_as_dev->gadget.is_dualspeed = 1;
-
-	/* the "gadget" abstracts/virtualizes the controller */
-	/*strcpy(cy_as_dev->gadget.dev.bus_id, "cyasgadget");*/
-	cy_as_dev->gadget.dev.release = cyas_gadget_release;
-	cy_as_dev->gadget.name = cy_as_driver_name;
-
-	/* Get the device handle */
-	cy_as_dev->dev_handle = cyasdevice_getdevhandle();
-	if (0 == cy_as_dev->dev_handle) {
-		#ifndef NDEBUG
-		cy_as_hal_print_message("<1> cy_as_gadget: "
-			"no west bridge device\n");
-		#endif
-		retval = -EFAULT;
-		goto done;
-	}
-
-	/* We are done now */
-	cy_as_gadget_controller = cy_as_dev;
-#if 0
-	pdev is the platform_device or pci_device or whatever is used here
-	retval = usb_add_gadget_udc(&pdev->dev, &cy_as_dev->gadget);
-	if (retval)
-		goto done;
-#endif
-
-	return 0;
-
-/*
- * in case of an error
- */
-done:
-	if (cy_as_dev)
-		cyasgadget_deinit(cy_as_dev);
-
-	return retval;
-}
-
-static int __init cyas_init(void)
-{
-	int init_res = 0;
-
-	init_res = cyasgadget_initialize();
-
-	if (init_res != 0) {
-		printk(KERN_WARNING "<1> gadget ctl instance "
-			"init error:%d\n", init_res);
-		if (init_res > 0) {
-			/* force -E/0 linux convention */
-			init_res = init_res * -1;
-		}
-	}
-
-	return init_res;
-}
-module_init(cyas_init);
-
-static void __exit cyas_cleanup(void)
-{
-	if (cy_as_gadget_controller != NULL)
-		cyasgadget_deinit(cy_as_gadget_controller);
-}
-module_exit(cyas_cleanup);
-
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION(CY_AS_DRIVER_DESC);
-MODULE_AUTHOR("cypress semiconductor");
-
-/*[]*/
diff --git a/drivers/staging/westbridge/astoria/gadget/cyasgadget.h b/drivers/staging/westbridge/astoria/gadget/cyasgadget.h
deleted file mode 100644
index e01cea7eeb77..000000000000
--- a/drivers/staging/westbridge/astoria/gadget/cyasgadget.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/* cyangadget.h - Linux USB Gadget driver file for the Cypress West Bridge
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-/*
- * Cypress West Bridge high/full speed USB device controller code
- * Based on the Netchip 2280 device controller by David Brownell
- * in the linux 2.6.10 kernel
- *
- * linux/drivers/usb/gadget/net2280.h
- */
-
-/*
- * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
- * Copyright (C) 2003 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _INCLUDED_CYANGADGET_H_
-#define _INCLUDED_CYANGADGET_H_
-
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/sched.h>
-
-#include "../include/linux/westbridge/cyastoria.h"
-#include "../include/linux/westbridge/cyashal.h"
-#include "../include/linux/westbridge/cyasdevice.h"
-#include "cyasgadget_ioctl.h"
-
-#include <linux/module.h>
-#include <linux/init.h>
-
-/*char driver defines, revisit*/
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/fs.h>		/* everything... */
-#include <linux/errno.h>	/* error codes */
-#include <linux/types.h>	/* size_t */
-#include <linux/proc_fs.h>
-#include <linux/fcntl.h>	/* O_ACCMODE */
-#include <linux/seq_file.h>
-#include <linux/cdev.h>
-#include <linux/scatterlist.h>
-#include <linux/pagemap.h>
-#include <linux/vmalloc.h>	  /* vmalloc(), vfree */
-#include <linux/msdos_fs.h> /*fat_alloc_cluster*/
-#include <linux/buffer_head.h>
-#include <asm/system.h>		/* cli(), *_flags */
-#include <linux/uaccess.h>	/* copy_*_user */
-
-extern int mpage_cleardirty(struct address_space *mapping, int num_pages);
-extern int fat_get_block(struct inode *, sector_t , struct buffer_head *, int);
-extern cy_as_device_handle *cyasdevice_getdevhandle(void);
-
-/* Driver data structures and utilities */
-typedef struct cyasgadget_ep {
-	struct usb_ep				usb_ep_inst;
-	struct cyasgadget			*dev;
-
-	/* analogous to a host-side qh */
-	struct list_head			queue;
-	const struct usb_endpoint_descriptor	*desc;
-	unsigned			num:8,
-						fifo_size:12,
-						in_fifo_validate:1,
-						out_overflow:1,
-						stopped:1,
-						is_in:1,
-						is_iso:1;
-	cy_as_usb_end_point_config cyepconfig;
-} cyasgadget_ep;
-
-typedef struct cyasgadget_req {
-	struct usb_request		req;
-	struct list_head		queue;
-	int	 ep_num;
-	unsigned			mapped:1,
-						valid:1,
-						complete:1,
-						ep_stopped:1;
-} cyasgadget_req;
-
-typedef struct cyasgadget {
-	/* each device provides one gadget, several endpoints */
-	struct usb_gadget			gadget;
-	spinlock_t					lock;
-	struct cyasgadget_ep		an_gadget_ep[16];
-	struct usb_gadget_driver	 *driver;
-	/* Handle to the West Bridge device */
-	cy_as_device_handle			dev_handle;
-	unsigned			enabled:1,
-						protocol_stall:1,
-						softconnect:1,
-						outsetupreq:1;
-	struct completion	thread_complete;
-	wait_queue_head_t	thread_wq;
-	struct semaphore	thread_sem;
-	struct list_head	thread_queue;
-
-	cy_bool tmtp_send_complete;
-	cy_bool tmtp_get_complete;
-	cy_bool tmtp_need_new_blk_tbl;
-	/* Data member used to store the SendObjectComplete event data */
-	cy_as_mtp_send_object_complete_data tmtp_send_complete_data;
-	/* Data member used to store the GetObjectComplete event data */
-	cy_as_mtp_get_object_complete_data tmtp_get_complete_data;
-
-} cyasgadget;
-
-static inline void set_halt(cyasgadget_ep *ep)
-{
-	return;
-}
-
-static inline void clear_halt(cyasgadget_ep *ep)
-{
-	return;
-}
-
-#define xprintk(dev, level, fmt, args...) \
-	printk(level "%s %s: " fmt, driver_name, \
-			pci_name(dev->pdev), ## args)
-
-#ifdef DEBUG
-#undef DEBUG
-#define DEBUG(dev, fmt, args...) \
-	xprintk(dev, KERN_DEBUG, fmt, ## args)
-#else
-#define DEBUG(dev, fmt, args...) \
-	do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE
-#define VDEBUG DEBUG
-#else
-#define VDEBUG(dev, fmt, args...) \
-	do { } while (0)
-#endif	/* VERBOSE */
-
-#define ERROR(dev, fmt, args...) \
-	xprintk(dev, KERN_ERR, fmt, ## args)
-#define GADG_WARN(dev, fmt, args...) \
-	xprintk(dev, KERN_WARNING, fmt, ## args)
-#define INFO(dev, fmt, args...) \
-	xprintk(dev, KERN_INFO, fmt, ## args)
-
-/*-------------------------------------------------------------------------*/
-
-static inline void start_out_naking(struct cyasgadget_ep *ep)
-{
-	return;
-}
-
-static inline void stop_out_naking(struct cyasgadget_ep *ep)
-{
-	return;
-}
-
-#endif	/* _INCLUDED_CYANGADGET_H_ */
diff --git a/drivers/staging/westbridge/astoria/gadget/cyasgadget_ioctl.h b/drivers/staging/westbridge/astoria/gadget/cyasgadget_ioctl.h
deleted file mode 100644
index 21dd716f116e..000000000000
--- a/drivers/staging/westbridge/astoria/gadget/cyasgadget_ioctl.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/* cyasgadget_ioctl.h - Linux USB Gadget driver ioctl file for
- * Cypress West Bridge
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef CYASGADGET_IOCTL_H
-#define CYASGADGET_IOCTL_H
-
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-typedef struct cy_as_gadget_ioctl_send_object {
-	uint32_t status;
-	uint32_t byte_count;
-	uint32_t transaction_id;
-} cy_as_gadget_ioctl_send_object;
-
-typedef struct cy_as_gadget_ioctl_get_object {
-	uint32_t status;
-	uint32_t byte_count;
-} cy_as_gadget_ioctl_get_object;
-
-
-typedef struct cy_as_gadget_ioctl_tmtp_status {
-	cy_bool tmtp_send_complete;
-	cy_bool tmtp_get_complete;
-	cy_bool tmtp_need_new_blk_tbl;
-	cy_as_gadget_ioctl_send_object tmtp_send_complete_data;
-	cy_as_gadget_ioctl_get_object tmtp_get_complete_data;
-	uint32_t t_usec;
-} cy_as_gadget_ioctl_tmtp_status;
-
-/*Init send object data*/
-typedef struct cy_as_gadget_ioctl_i_s_o_j_d {
-	uint32_t	*blk_addr_p;	   /* starting sector */
-	uint16_t	*blk_count_p;	  /* num of sectors in the block */
-	/* number of entries in the blk table */
-	uint32_t	item_count;
-	uint32_t	num_bytes;
-	/*  in case if more prcise timestamping is done in kernel mode  */
-	uint32_t	t_usec;
-	uint32_t	ret_val;
-	char	*file_name;
-	uint32_t	name_length;
-
-} cy_as_gadget_ioctl_i_s_o_j_d;
-
-
-/*Init get object data*/
-typedef struct cy_as_gadget_ioctl_i_g_o_j_d  {
-	uint32_t *blk_addr_p;
-	uint16_t *blk_count_p;
-	uint32_t item_count;
-	uint32_t num_bytes;
-	uint32_t tid;
-	uint32_t ret_val;
-	char *file_name;
-	uint32_t name_length;
-
-} cy_as_gadget_ioctl_i_g_o_j_d;
-
-typedef struct cy_as_gadget_ioctl_cancel {
-	uint32_t ret_val;
-} cy_as_gadget_ioctl_cancel;
-
-#define CYASGADGET_IOC_MAGIC 0xEF
-#define CYASGADGET_GETMTPSTATUS \
-	_IOW(CYASGADGET_IOC_MAGIC,  0, cy_as_gadget_ioctl_tmtp_status)
-#define CYASGADGET_CLEARTMTPSTATUS \
-	_IO(CYASGADGET_IOC_MAGIC,   1)
-#define CYASGADGET_INITSOJ \
-	_IOW(CYASGADGET_IOC_MAGIC,  2, cy_as_gadget_ioctl_i_s_o_j_d)
-#define CYASGADGET_INITGOJ \
-	_IOW(CYASGADGET_IOC_MAGIC,  3, cy_as_gadget_ioctl_i_g_o_j_d)
-#define CYASGADGET_CANCELSOJ \
-	_IOW(CYASGADGET_IOC_MAGIC,   4, cy_as_gadget_ioctl_cancel)
-#define CYASGADGET_CANCELGOJ \
-	_IOW(CYASGADGET_IOC_MAGIC,   5, cy_as_gadget_ioctl_cancel)
-#define CYASGADGET_IOC_MAXNR 6
-
-#endif
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanerr.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanerr.h
deleted file mode 100644
index c7d4ebb020c9..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanerr.h
+++ /dev/null
@@ -1,418 +0,0 @@
-/*  Cypress West Bridge API header file (cyanerr.h)
- ## Symbols for backward compatibility with previous releases of Antioch SDK.
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYANERR_H_
-#define _INCLUDED_CYANERR_H_
-
-#include "cyaserr.h"
-
-#ifndef __doxygen__
-
-/*
- * Function completed successfully.
- */
-#define CY_AN_ERROR_SUCCESS	(CY_AS_ERROR_SUCCESS)
-
-/*
- * A function trying to acquire a resource was unable to do so.
- */
-#define CY_AN_ERROR_NOT_ACQUIRED (CY_AS_ERROR_NOT_ACQUIRED)
-
-/*
- * A function trying to acquire a resource was unable to do so.
- */
-#define CY_AN_ERROR_NOT_RELEASED (CY_AS_ERROR_NOT_RELEASED)
-
-/*
- * The West Bridge firmware is not loaded.
- */
-#define CY_AN_ERROR_NO_FIRMWARE (CY_AS_ERROR_NO_FIRMWARE)
-
-/*
- * A timeout occurred waiting on a response from the West Bridge device
- */
-#define CY_AN_ERROR_TIMEOUT (CY_AS_ERROR_TIMEOUT)
-
-/*
- * A request to download firmware was made while not in the CONFIG mode
- */
-#define CY_AN_ERROR_NOT_IN_CONFIG_MODE (CY_AS_ERROR_NOT_IN_CONFIG_MODE)
-
-/*
- * This error is returned if the firmware size specified is too invalid.
- */
-#define CY_AN_ERROR_INVALID_SIZE (CY_AS_ERROR_INVALID_SIZE)
-
-/*
- * This error is returned if a request is made to acquire a resource that has
- * already been acquired.
- */
-#define CY_AN_ERROR_RESOURCE_ALREADY_OWNED (CY_AS_ERROR_RESOURCE_ALREADY_OWNED)
-
-/*
- * This error is returned if a request is made to release a resource that has
- * not previously been acquired.
- */
-#define CY_AN_ERROR_RESOURCE_NOT_OWNED (CY_AS_ERROR_RESOURCE_NOT_OWNED)
-
-/*
- * This error is returned when a request is made for a media that does not
- * exist
- */
-#define CY_AN_ERROR_NO_SUCH_MEDIA (CY_AS_ERROR_NO_SUCH_MEDIA)
-
-/*
- * This error is returned when a request is made for a device that does
- * not exist
- */
-#define CY_AN_ERROR_NO_SUCH_DEVICE (CY_AS_ERROR_NO_SUCH_DEVICE)
-
-/*
- * This error is returned when a request is made for a unit that does
- * not exist
- */
-#define CY_AN_ERROR_NO_SUCH_UNIT (CY_AS_ERROR_NO_SUCH_UNIT)
-
-/*
- * This error is returned when a request is made for a block that does
- * not exist
- */
-#define CY_AN_ERROR_INVALID_BLOCK (CY_AS_ERROR_INVALID_BLOCK)
-
-/*
- * This error is returned when an invalid trace level is set.
- */
-#define CY_AN_ERROR_INVALID_TRACE_LEVEL (CY_AS_ERROR_INVALID_TRACE_LEVEL)
-
-/*
- * This error is returned when West Bridge is already in the standby state
- * and an attempt is made to put West Bridge into this state again.
- */
-#define CY_AN_ERROR_ALREADY_STANDBY	(CY_AS_ERROR_ALREADY_STANDBY)
-
-/*
- * This error is returned when the API needs to set a pin on the
- * West Bridge device, but this is not supported by the underlying HAL
- * layer.
- */
-#define CY_AN_ERROR_SETTING_WAKEUP_PIN (CY_AS_ERROR_SETTING_WAKEUP_PIN)
-
-/*
- * This error is returned when a module is being started that has
- * already been started.
- */
-#define CY_AN_ERROR_ALREADY_RUNNING	 (CY_AS_ERROR_ALREADY_RUNNING)
-
-/*
- * This error is returned when a module is being stopped that has
- * already been stopped.
- */
-#define CY_AN_ERROR_NOT_RUNNING (CY_AS_ERROR_NOT_RUNNING)
-
-/*
- * This error is returned when the caller tries to claim a media that has
- * already been claimed.
- */
-#define CY_AN_ERROR_MEDIA_ALREADY_CLAIMED (CY_AS_ERROR_MEDIA_ALREADY_CLAIMED)
-
-/*
- * This error is returned when the caller tries to release a media that
- * has already been released.
- */
-#define CY_AN_ERROR_MEDIA_NOT_CLAIMED (CY_AS_ERROR_MEDIA_NOT_CLAIMED)
-
-/*
- * This error is returned when canceling trying to cancel an asynchronous
- * operation when an async operation is not pending.
- */
-#define CY_AN_ERROR_NO_OPERATION_PENDING (CY_AS_ERROR_NO_OPERATION_PENDING)
-
-/*
- * This error is returned when an invalid endpoint number is provided
- * to an API call.
- */
-#define CY_AN_ERROR_INVALID_ENDPOINT (CY_AS_ERROR_INVALID_ENDPOINT)
-
-/*
- * This error is returned when an invalid descriptor type
- * is specified in an API call.
- */
-#define CY_AN_ERROR_INVALID_DESCRIPTOR (CY_AS_ERROR_INVALID_DESCRIPTOR)
-
-/*
- * This error is returned when an invalid descriptor index
- * is specified in an API call.
- */
-#define CY_AN_ERROR_BAD_INDEX (CY_AS_ERROR_BAD_INDEX)
-
-/*
- * This error is returned if trying to set a USB descriptor
- * when in the P port enumeration mode.
- */
-#define CY_AN_ERROR_BAD_ENUMERATION_MODE (CY_AS_ERROR_BAD_ENUMERATION_MODE)
-
-/*
- * This error is returned when the endpoint configuration specified
- * is not valid.
- */
-#define CY_AN_ERROR_INVALID_CONFIGURATION (CY_AS_ERROR_INVALID_CONFIGURATION)
-
-/*
- * This error is returned when the API cannot verify it is connected
- * to an West Bridge device.
- */
-#define CY_AN_ERROR_NO_ANTIOCH (CY_AS_ERROR_NO_ANTIOCH)
-
-/*
- * This error is returned when an API function is called and
- * CyAnMiscConfigureDevice has not been called to configure West
- * Bridge for the current environment.
- */
-#define CY_AN_ERROR_NOT_CONFIGURED (CY_AS_ERROR_NOT_CONFIGURED)
-
-/*
- * This error is returned when West Bridge cannot allocate memory required for
- * internal API operations.
- */
-#define CY_AN_ERROR_OUT_OF_MEMORY (CY_AS_ERROR_OUT_OF_MEMORY)
-
-/*
- * This error is returned when a module is being started that has
- * already been started.
- */
-#define CY_AN_ERROR_NESTED_SLEEP (CY_AS_ERROR_NESTED_SLEEP)
-
-/*
- * This error is returned when an operation is attempted on an endpoint that has
- * been disabled.
- */
-#define CY_AN_ERROR_ENDPOINT_DISABLED (CY_AS_ERROR_ENDPOINT_DISABLED)
-
-/*
- * This error is returned when a call is made to an API function when the device
- * is in standby.
- */
-#define CY_AN_ERROR_IN_STANDBY (CY_AS_ERROR_IN_STANDBY)
-
-/*
- * This error is returned when an API call is made with an invalid handle value.
- */
-#define CY_AN_ERROR_INVALID_HANDLE (CY_AS_ERROR_INVALID_HANDLE)
-
-/*
- * This error is returned when an invalid response is returned from the West
- * Bridge device.
- */
-#define CY_AN_ERROR_INVALID_RESPONSE (CY_AS_ERROR_INVALID_RESPONSE)
-
-/*
- * This error is returned from the callback function for any asynchronous
- * read or write request that is canceled.
- */
-#define CY_AN_ERROR_CANCELED (CY_AS_ERROR_CANCELED)
-
-/*
- * This error is returned when the call to create sleep channel fails
- * in the HAL layer.
- */
-#define CY_AN_ERROR_CREATE_SLEEP_CHANNEL_FAILED \
-	(CY_AS_ERROR_CREATE_SLEEP_CHANNEL_FAILED)
-
-/*
- * This error is returned when the call to CyAnMiscLeaveStandby
- * is made and the device is not in standby.
- */
-#define CY_AN_ERROR_NOT_IN_STANDBY (CY_AS_ERROR_NOT_IN_STANDBY)
-
-/*
- * This error is returned when the call to destroy sleep channel fails
- * in the HAL layer.
- */
-#define CY_AN_ERROR_DESTROY_SLEEP_CHANNEL_FAILED \
-	(CY_AS_ERROR_DESTROY_SLEEP_CHANNEL_FAILED)
-
-/*
- * This error is returned when an invalid resource is specified to a call
- * to CyAnMiscAcquireResource() or CyAnMiscReleaseResource()
- */
-#define CY_AN_ERROR_INVALID_RESOURCE (CY_AS_ERROR_INVALID_RESOURCE)
-
-/*
- * This error occurs when an operation is requested on an endpoint that has
- * a currently pending async operation.
- */
-#define CY_AN_ERROR_ASYNC_PENDING (CY_AS_ERROR_ASYNC_PENDING)
-
-/*
- * This error is returned when a call to CyAnStorageCancelAsync() or
- * CyAnUsbCancelAsync() is made when no asynchronous request is pending.
- */
-#define CY_AN_ERROR_ASYNC_NOT_PENDING (CY_AS_ERROR_ASYNC_NOT_PENDING)
-
-/*
- * This error is returned when a request is made to put the West Bridge device
- * into standby mode while the USB stack is still active.
- */
-#define CY_AN_ERROR_USB_RUNNING (CY_AS_ERROR_USB_RUNNING)
-
-/*
- * A request for in the wrong direction was issued on an endpoint.
- */
-#define CY_AN_ERROR_USB_BAD_DIRECTION (CY_AS_ERROR_USB_BAD_DIRECTION)
-
-/*
- * An invalid request was received
- */
-#define CY_AN_ERROR_INVALID_REQUEST (CY_AS_ERROR_INVALID_REQUEST)
-
-/*
- * An ACK request was requested while no setup packet was pending.
- */
-#define CY_AN_ERROR_NO_SETUP_PACKET_PENDING	\
-	(CY_AS_ERROR_NO_SETUP_PACKET_PENDING)
-
-/*
- * A call was made to a API function that cannot be called from a callback.
- */
-#define CY_AN_ERROR_INVALID_IN_CALLBACK	(CY_AS_ERROR_INVALID_IN_CALLBACK)
-
-/*
- * A call was made to CyAnUsbSetEndPointConfig() before
- * CyAnUsbSetPhysicalConfiguration() was called.
- */
-#define CY_AN_ERROR_ENDPOINT_CONFIG_NOT_SET	\
-	(CY_AS_ERROR_ENDPOINT_CONFIG_NOT_SET)
-
-/*
- * The physical endpoint referenced is not valid in the current
- * physical configuration
- */
-#define CY_AN_ERROR_INVALID_PHYSICAL_ENDPOINT \
-	(CY_AS_ERROR_INVALID_PHYSICAL_ENDPOINT)
-
-/*
- * The data supplied to the CyAnMiscDownloadFirmware() call is not aligned on a
- * WORD (16 bit) boundary.
- */
-#define CY_AN_ERROR_ALIGNMENT_ERROR	(CY_AS_ERROR_ALIGNMENT_ERROR)
-
-/*
- * A call was made to destroy the West Bridge device, but the USB stack or the
- * storage stack was will running.
- */
-#define CY_AN_ERROR_STILL_RUNNING (CY_AS_ERROR_STILL_RUNNING)
-
-/*
- * A call was made to the API for a function that is not yet supported.
- */
-#define CY_AN_ERROR_NOT_YET_SUPPORTED (CY_AS_ERROR_NOT_YET_SUPPORTED)
-
-/*
- * A NULL callback was provided where a non-NULL callback was required
- */
-#define CY_AN_ERROR_NULL_CALLBACK (CY_AS_ERROR_NULL_CALLBACK)
-
-/*
- * This error is returned when a request is made to put the West Bridge device
- * into standby mode while the storage stack is still active.
- */
-#define CY_AN_ERROR_STORAGE_RUNNING	(CY_AS_ERROR_STORAGE_RUNNING)
-
-/*
- * This error is returned when an operation is attempted that cannot be
- * completed while the USB stack is connected to a USB host.
- */
-#define CY_AN_ERROR_USB_CONNECTED (CY_AS_ERROR_USB_CONNECTED)
-
-/*
- * This error is returned when a USB disconnect is attempted and the
- * West Bridge device is not connected.
- */
-#define CY_AN_ERROR_USB_NOT_CONNECTED (CY_AS_ERROR_USB_NOT_CONNECTED)
-
-/*
- * This error is returned when an P2S storage operation attempted and
- * data could not be read or written to the storage media.
- */
-#define CY_AN_ERROR_MEDIA_ACCESS_FAILURE (CY_AS_ERROR_MEDIA_ACCESS_FAILURE)
-
-/*
- * This error is returned when an P2S storage operation attempted and
- * the media is write protected.
- */
-#define CY_AN_ERROR_MEDIA_WRITE_PROTECTED (CY_AS_ERROR_MEDIA_WRITE_PROTECTED)
-
-/*
- * This error is returned when an attempt is made to cancel a request
- * that has already been sent to the West Bridge.
- */
-#define CY_AN_ERROR_OPERATION_IN_TRANSIT (CY_AS_ERROR_OPERATION_IN_TRANSIT)
-
-/*
- * This error is returned when an invalid parameter is passed to one of
- * the APIs.
- */
-#define CY_AN_ERROR_INVALID_PARAMETER (CY_AS_ERROR_INVALID_PARAMETER)
-
-/*
- * This error is returned if an API is not supported by the current
- * West Bridge device or the active firmware version.
- */
-#define CY_AN_ERROR_NOT_SUPPORTED (CY_AS_ERROR_NOT_SUPPORTED)
-
-/*
- * This error is returned when a call is made to one of the Storage or
- * USB APIs while the device is in suspend mode.
- */
-#define CY_AN_ERROR_IN_SUSPEND (CY_AS_ERROR_IN_SUSPEND)
-
-/*
- * This error is returned when the call to CyAnMiscLeaveSuspend
- * is made and the device is not in suspend mode.
- */
-#define CY_AN_ERROR_NOT_IN_SUSPEND (CY_AS_ERROR_NOT_IN_SUSPEND)
-
-/*
- * This error is returned when a command that is disabled by USB is called.
- */
-#define CY_AN_ERROR_FEATURE_NOT_ENABLED (CY_AS_ERROR_FEATURE_NOT_ENABLED)
-
-/*
- * This error is returned when an Async storage read or write is called before a
- * query device call is issued.
- */
-#define CY_AN_ERROR_QUERY_DEVICE_NEEDED (CY_AS_ERROR_QUERY_DEVICE_NEEDED)
-
-/*
- * This error is returned when a call is made to USB or STORAGE Start or
- * Stop before a prior Start or Stop has finished.
- */
-#define CY_AN_ERROR_STARTSTOP_PENDING (CY_AS_ERROR_STARTSTOP_PENDING)
-
-/*
- * This error is returned when a request is made for a bus that does not exist
- */
-#define CY_AN_ERROR_NO_SUCH_BUS  (CY_AS_ERROR_NO_SUCH_BUS)
-
-#endif /* __doxygen__ */
-
-#endif /* _INCLUDED_CYANERR_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanmedia.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanmedia.h
deleted file mode 100644
index be074887f5a3..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanmedia.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* Cypress West Bridge API header file (cyanmedia.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYANMEDIA_H_
-#define _INCLUDED_CYANMEDIA_H_
-
-#include "cyas_cplus_start.h"
-
-/* Summary
-   Specifies a specific type of media supported by West Bridge
-
-   Description
-   The West Bridge device supports five specific types
-   of media as storage/IO devices attached to it's S-Port.  This
-   type is used to indicate the type of media being referenced in
-   any API call.
-*/
-#include "cyasmedia.h"
-
-/* Flash NAND memory (may be SLC or MLC) */
-#define cy_an_media_nand cy_as_media_nand
-
-/* An SD flash memory device */
-#define cy_an_media_sd_flash cy_as_media_sd_flash
-
-/* An MMC flash memory device */
-#define cy_an_media_mmc_flash cy_as_media_mmc_flash
-
-/* A CE-ATA disk drive */
-#define cy_an_media_ce_ata cy_as_media_ce_ata
-
- /* SDIO device. */
-#define cy_an_media_sdio cy_as_media_sdio
-#define cy_an_media_max_media_value \
-	cy_as_media_max_media_value
-
-typedef cy_as_media_type cy_an_media_type;
-
-#include "cyas_cplus_end.h"
-
-#endif				/* _INCLUDED_CYANMEDIA_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanmisc.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanmisc.h
deleted file mode 100644
index 0838648dc169..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanmisc.h
+++ /dev/null
@@ -1,614 +0,0 @@
-/*  Cypress West Bridge API header file (cyanmisc.h)
- ## Version for backward compatibility with previous Antioch SDK releases.
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYANMISC_H_
-#define _INCLUDED_CYANMISC_H_
-
-#include "cyantypes.h"
-#include <cyasmisc.h>
-#include "cyanmedia.h"
-#include "cyas_cplus_start.h"
-
-#define CY_AN_LEAVE_STANDBY_DELAY_CLOCK	\
-	(CY_AS_LEAVE_STANDBY_DELAY_CLOCK)
-#define CY_AN_RESET_DELAY_CLOCK	\
-	(CY_AS_RESET_DELAY_CLOCK)
-
-#define CY_AN_LEAVE_STANDBY_DELAY_CRYSTAL \
-	(CY_AS_LEAVE_STANDBY_DELAY_CRYSTAL)
-
-#define CY_AN_RESET_DELAY_CRYSTAL \
-	(CY_AS_RESET_DELAY_CRYSTAL)
-
-/* Defines to convert the old CyAn names to the new
- * CyAs names
- */
-typedef cy_as_device_handle	cy_an_device_handle;
-
-#define cy_an_device_dack_ack	cy_as_device_dack_ack
-#define cy_an_device_dack_eob	cy_as_device_dack_eob
-typedef cy_as_device_dack_mode cy_an_device_dack_mode;
-
-typedef cy_as_device_config cy_an_device_config;
-
-#define cy_an_resource_u_s_b	cy_as_bus_u_sB
-#define cy_an_resource_sdio_MMC	cy_as_bus_1
-#define cy_an_resource_nand	cy_as_bus_0
-typedef cy_as_resource_type cy_an_resource_type;
-
-#define cy_an_reset_soft	cy_as_reset_soft
-#define cy_an_reset_hard	cy_as_reset_hard
-typedef cy_as_reset_type cy_an_reset_type;
-typedef cy_as_funct_c_b_type cy_an_funct_c_b_type;
-typedef cy_as_function_callback cy_an_function_callback;
-
-#define cy_an_event_misc_initialized \
-	cy_as_event_misc_initialized
-#define cy_an_event_misc_awake	\
-	cy_as_event_misc_awake
-#define cy_an_event_misc_heart_beat	 \
-	cy_as_event_misc_heart_beat
-#define cy_an_event_misc_wakeup	\
-	cy_as_event_misc_wakeup
-#define cy_an_event_misc_device_mismatch \
-	cy_as_event_misc_device_mismatch
-typedef cy_as_misc_event_type \
-	cy_an_misc_event_type;
-typedef cy_as_misc_event_callback \
-	cy_an_misc_event_callback;
-
-#define cy_an_misc_gpio_0	cy_as_misc_gpio_0
-#define cy_an_misc_gpio_1	cy_as_misc_gpio_1
-#define cy_an_misc_gpio__nand_CE \
-	cy_as_misc_gpio__nand_CE
-#define cy_an_misc_gpio__nand_CE2 \
-	cy_as_misc_gpio__nand_CE2
-#define cy_an_misc_gpio__nand_WP \
-	cy_as_misc_gpio__nand_WP
-#define cy_an_misc_gpio__nand_CLE \
-	cy_as_misc_gpio__nand_CLE
-#define cy_an_misc_gpio__nand_ALE \
-	cy_as_misc_gpio__nand_ALE
-#define cy_an_misc_gpio_U_valid \
-	cy_as_misc_gpio_U_valid
-#define cy_an_misc_gpio_SD_POW \
-	cy_as_misc_gpio_SD_POW
-typedef cy_as_misc_gpio cy_an_misc_gpio;
-
-#define CY_AN_SD_DEFAULT_FREQ CY_AS_SD_DEFAULT_FREQ
-#define CY_AN_SD_RATED_FREQ	 CY_AS_SD_RATED_FREQ
-typedef cy_as_low_speed_sd_freq cy_an_low_speed_sd_freq;
-
-#define CY_AN_HS_SD_FREQ_48	CY_AS_HS_SD_FREQ_48
-#define CY_AN_HS_SD_FREQ_24	CY_AS_HS_SD_FREQ_24
-typedef cy_as_high_speed_sd_freq \
-	cy_an_high_speed_sd_freq;
-
-#define cy_an_misc_active_high cy_as_misc_active_high
-#define cy_an_misc_active_low cy_as_misc_active_low
-typedef cy_as_misc_signal_polarity cy_an_misc_signal_polarity;
-
-typedef cy_as_get_firmware_version_data \
-	cy_an_get_firmware_version_data;
-
-enum {
-	CYAN_FW_TRACE_LOG_NONE = 0,
-	CYAN_FW_TRACE_LOG_STATE,
-	CYAN_FW_TRACE_LOG_CALLS,
-	CYAN_FW_TRACE_LOG_STACK_TRACE,
-	CYAN_FW_TRACE_MAX_LEVEL
-};
-
-
-/***********************************/
-/***********************************/
-/*	FUNCTIONS					*/
-/***********************************/
-/***********************************/
-
-
-EXTERN cy_an_return_status_t
-cy_an_misc_create_device(
-		cy_an_device_handle *handle_p,
-		cy_an_hal_device_tag tag
-		);
-#define cy_an_misc_create_device(h, tag) \
-	cy_as_misc_create_device((cy_as_device_handle *)(h), \
-	(cy_as_hal_device_tag)(tag))
-
-EXTERN cy_an_return_status_t
-cy_an_misc_destroy_device(
-	cy_an_device_handle  handle
-	);
-#define cy_an_misc_destroy_device(h) \
-	cy_as_misc_destroy_device((cy_as_device_handle)(h))
-
-EXTERN cy_an_return_status_t
-cy_an_misc_configure_device(
-		cy_an_device_handle		handle,
-		cy_an_device_config		*config_p
-		);
-#define cy_an_misc_configure_device(h, cfg) \
-	cy_as_misc_configure_device((cy_as_device_handle)(h), \
-	(cy_as_device_config *)(cfg))
-
-EXTERN cy_an_return_status_t
-cy_an_misc_in_standby(
-		cy_an_device_handle		handle,
-		cy_bool					*standby
-		);
-#define cy_an_misc_in_standby(h, standby) \
-	cy_as_misc_in_standby((cy_as_device_handle)(h), (standby))
-
-/* Sync version of Download Firmware */
-EXTERN cy_an_return_status_t
-cy_an_misc_download_firmware(
-		cy_an_device_handle		handle,
-		const void			 *fw_p,
-		uint16_t			size
-		);
-
-#define cy_an_misc_download_firmware(handle, fw_p, size) \
-	cy_as_misc_download_firmware((cy_as_device_handle)\
-	(handle), (fw_p), (size), 0, 0)
-
-/* Async version of Download Firmware */
-EXTERN cy_an_return_status_t
-cy_an_misc_download_firmware_e_x(
-		cy_an_device_handle		handle,
-		const void			 *fw_p,
-		uint16_t			size,
-		cy_an_function_callback		cb,
-		uint32_t			client
-		);
-
-#define cy_an_misc_download_firmware_e_x(h, fw_p, size, cb, client) \
-	cy_as_misc_download_firmware((cy_as_device_handle)(h), \
-	(fw_p), (size), (cy_as_function_callback)(cb), (client))
-
-/* Sync version of Get Firmware Version */
-EXTERN cy_an_return_status_t
-cy_as_misc_get_firmware_version_dep(
-				cy_as_device_handle handle,
-				 uint16_t *major,
-				 uint16_t *minor,
-				 uint16_t *build,
-				 uint8_t *media_type,
-				 cy_bool *is_debug_mode);
-
-#define cy_an_misc_get_firmware_version\
-	(h, major, minor, bld, type, mode)	\
-	cy_as_misc_get_firmware_version_dep((cy_as_device_handle)(h), \
-	(major), (minor), (bld), (type), (mode))
-
-/* Async version of Get Firmware Version*/
-EXTERN cy_an_return_status_t
-cy_an_misc_get_firmware_version_e_x(
-		cy_an_device_handle		handle,
-		cy_an_get_firmware_version_data *data,
-		cy_an_function_callback			cb,
-		uint32_t			client
-		);
-#define cy_an_misc_get_firmware_version_e_x\
-	(h, data, cb, client) \
-	cy_as_misc_get_firmware_version((cy_as_device_handle)(h), \
-	(data), (cy_as_function_callback)(cb), (client))
-
-/* Sync version of Read MCU Register*/
-EXTERN cy_an_return_status_t
-cy_an_misc_read_m_c_u_register(
-	cy_an_device_handle	handle,
-	uint16_t			address,
-	uint8_t				*value
-	);
-
-#define cy_an_misc_read_m_c_u_register(handle, address, value) \
-	cy_as_misc_read_m_c_u_register((cy_as_device_handle)(handle), \
-	(address), (value), 0, 0)
-
-/* Async version of Read MCU Register*/
-EXTERN cy_an_return_status_t
-cy_an_misc_read_m_c_u_register_e_x(
-	cy_an_device_handle		handle,
-	uint16_t			address,
-	uint8_t				*value,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-
-#define cy_an_misc_read_m_c_u_register_e_x\
-	(h, addr, val, cb, client) \
-	cy_as_misc_read_m_c_u_register((cy_as_device_handle)(h), \
-	(addr), (val), (cy_as_function_callback)(cb), (client))
-
-/* Sync version of Write MCU Register*/
-EXTERN cy_an_return_status_t
-cy_an_misc_write_m_c_u_register(
-		cy_an_device_handle	handle,
-		uint16_t			address,
-		uint8_t				mask,
-		uint8_t			 value
-		);
-#define cy_an_misc_write_m_c_u_register\
-	(handle, address, mask, value) \
-	cy_as_misc_write_m_c_u_register((cy_as_device_handle)(handle), \
-	(address), (mask), (value), 0, 0)
-
-/* Async version of Write MCU Register*/
-EXTERN cy_an_return_status_t
-cy_an_misc_write_m_c_u_register_e_x(
-		cy_an_device_handle	 handle,
-		uint16_t			 address,
-		uint8_t			 mask,
-		uint8_t			  value,
-		cy_an_function_callback cb,
-		uint32_t		 client
-		);
-#define cy_an_misc_write_m_c_u_register_e_x\
-	(h, addr, mask, val, cb, client)	  \
-	cy_as_misc_write_m_c_u_register((cy_as_device_handle)(h), \
-	(addr), (mask), (val), (cy_as_function_callback)(cb), (client))
-
-/* Sync version of Write MCU Register*/
-EXTERN cy_an_return_status_t
-cy_an_misc_reset(
-	cy_an_device_handle		handle,
-	cy_an_reset_type			type,
-	cy_bool				flush
-	);
-#define cy_an_misc_reset(handle, type, flush) \
-	cy_as_misc_reset((cy_as_device_handle)(handle), \
-	(type), (flush), 0, 0)
-
-/* Async version of Write MCU Register*/
-EXTERN cy_an_return_status_t
-cy_an_misc_reset_e_x(
-	cy_an_device_handle	handle,
-	cy_an_reset_type		type,
-	cy_bool				flush,
-	cy_an_function_callback	cb,
-	uint32_t		client
-	);
-#define cy_an_misc_reset_e_x(h, type, flush, cb, client) \
-	cy_as_misc_reset((cy_as_device_handle)(h), \
-	(cy_as_reset_type)(type), (flush), \
-	(cy_as_function_callback)(cb), (client))
-
-/*  Synchronous version of CyAnMiscAcquireResource. */
-EXTERN cy_an_return_status_t
-cy_an_misc_acquire_resource(
-	cy_an_device_handle		handle,
-	cy_an_resource_type		type,
-	cy_bool				force
-	);
-#define cy_an_misc_acquire_resource(h, type, force)		\
-	cy_as_misc_acquire_resource_dep((cy_as_device_handle)(h), \
-	(cy_as_resource_type)(type), (force))
-
-/* Asynchronous version of CyAnMiscAcquireResource. */
-EXTERN cy_an_return_status_t
-cy_an_misc_acquire_resource_e_x(
-	cy_an_device_handle		handle,
-	cy_an_resource_type *type,
-	cy_bool				force,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_misc_acquire_resource_e_x\
-	(h, type_p, force, cb, client) \
-	cy_as_misc_acquire_resource((cy_as_device_handle)(h), \
-	(cy_as_resource_type *)(type_p), \
-	(force), (cy_as_function_callback)(cb), (client))
-
-/* The one and only version of Release resource */
-EXTERN cy_an_return_status_t
-cy_an_misc_release_resource(
-	cy_an_device_handle		handle,
-	cy_an_resource_type		type
-	);
-#define cy_an_misc_release_resource(h, type)\
-	cy_as_misc_release_resource((cy_as_device_handle)(h), \
-	(cy_as_resource_type)(type))
-
-/* Synchronous version of CyAnMiscSetTraceLevel. */
-EXTERN cy_an_return_status_t
-cy_an_misc_set_trace_level(
-	cy_an_device_handle	handle,
-	uint8_t			level,
-	cy_an_media_type		media,
-	uint32_t		 device,
-	uint32_t		unit
-	);
-
-#define cy_an_misc_set_trace_level\
-	(handle, level, media, device, unit) \
-	cy_as_misc_set_trace_level_dep((cy_as_device_handle)(handle), \
-	(level), (cy_as_media_type)(media), (device), (unit), 0, 0)
-
-/* Asynchronous version of CyAnMiscSetTraceLevel. */
-EXTERN cy_an_return_status_t
-cy_an_misc_set_trace_level_e_x(
-	cy_an_device_handle		handle,
-	uint8_t				level,
-	cy_an_media_type			media,
-	uint32_t			device,
-	uint32_t			unit,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_misc_set_trace_level_e_x\
-	(h, level, media, device, unit, cb, client)	\
-	cy_as_misc_set_trace_level_dep((cy_as_device_handle)(h), \
-	(level), (cy_as_media_type)(media), (device), (unit),	\
-		(cy_as_function_callback)(cb), (client))
-
-/* Synchronous version of CyAnMiscEnterStandby. */
-EXTERN cy_an_return_status_t
-cy_an_misc_enter_standby(
-	cy_an_device_handle	handle,
-	cy_bool			pin
-	);
-#define cy_an_misc_enter_standby(handle, pin) \
-	cy_as_misc_enter_standby(\
-		(cy_as_device_handle)(handle), (pin), 0, 0)
-
-/* Synchronous version of CyAnMiscEnterStandby. */
-EXTERN cy_an_return_status_t
-cy_an_misc_enter_standby_e_x(
-	cy_an_device_handle	handle,
-	cy_bool			pin,
-	cy_an_function_callback	cb,
-	uint32_t		client
-	);
-#define cy_an_misc_enter_standby_e_x(h, pin, cb, client) \
-	cy_as_misc_enter_standby((cy_as_device_handle)(h), \
-	(pin), (cy_as_function_callback)(cb), (client))
-
-/* Only one version of CyAnMiscLeaveStandby. */
-EXTERN cy_an_return_status_t
-cy_an_misc_leave_standby(
-	cy_an_device_handle		handle,
-	cy_an_resource_type		type
-	);
-#define cy_an_misc_leave_standby(h, type)				 \
-	cy_as_misc_leave_standby((cy_as_device_handle)(h), \
-	(cy_as_resource_type)(type))
-
-/* The one version of Misc Register Callback */
-EXTERN cy_an_return_status_t
-cy_an_misc_register_callback(
-	cy_an_device_handle	handle,
-	cy_an_misc_event_callback	callback
-	);
-#define cy_an_misc_register_callback(h, cb)			\
-	cy_as_misc_register_callback((cy_as_device_handle)(h), \
-	(cy_as_misc_event_callback)(cb))
-
-/* The only version of SetLogLevel */
-EXTERN void
-cy_an_misc_set_log_level(
-	uint8_t	level
-	);
-#define cy_an_misc_set_log_level(level) \
-	cy_as_misc_set_log_level(level)
-
-/* Sync version of Misc Storage Changed */
-EXTERN cy_an_return_status_t
-cy_an_misc_storage_changed(
-	cy_an_device_handle		handle
-	);
-#define cy_an_misc_storage_changed(handle) \
-	cy_as_misc_storage_changed((cy_as_device_handle)(handle), 0, 0)
-
-/* Async version of Misc Storage Changed */
-EXTERN cy_an_return_status_t
-cy_an_misc_storage_changed_e_x(
-	cy_an_device_handle	handle,
-	cy_an_function_callback	cb,
-	uint32_t		client
-	);
-#define cy_an_misc_storage_changed_e_x(h, cb, client) \
-	cy_as_misc_storage_changed((cy_as_device_handle)(h), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync version of Heartbeat control */
-EXTERN cy_an_return_status_t
-cy_an_misc_heart_beat_control(
-		cy_an_device_handle				handle,
-		cy_bool						  enable
-		);
-#define cy_an_misc_heart_beat_control(handle, enable) \
-	cy_as_misc_heart_beat_control((cy_as_device_handle)\
-	(handle), (enable), 0, 0)
-
-/* Async version of Heartbeat control */
-EXTERN cy_an_return_status_t
-cy_an_misc_heart_beat_control_e_x(
-		cy_an_device_handle		   handle,
-		cy_bool					 enable,
-		cy_an_function_callback	   cb,
-		uint32_t		client
-		);
-#define cy_an_misc_heart_beat_control_e_x(h, enable, cb, client) \
-	cy_as_misc_heart_beat_control((cy_as_device_handle)(h), \
-	(enable), (cy_as_function_callback)(cb), (client))
-
-/* Sync version of Get Gpio */
-EXTERN cy_an_return_status_t
-cy_an_misc_get_gpio_value(
-		cy_an_device_handle				handle,
-		cy_an_misc_gpio					pin,
-		uint8_t						*value
-		);
-#define cy_an_misc_get_gpio_value(handle, pin, value) \
-	cy_as_misc_get_gpio_value((cy_as_device_handle)(handle), \
-	(cy_as_misc_gpio)(pin), (value), 0, 0)
-
-/* Async version of Get Gpio */
-EXTERN cy_an_return_status_t
-cy_an_misc_get_gpio_value_e_x(
-		cy_an_device_handle				handle,
-		cy_an_misc_gpio					pin,
-		uint8_t						*value,
-		cy_an_function_callback			cb,
-		uint32_t						client
-		);
-#define cy_an_misc_get_gpio_value_e_x(h, pin, value, cb, client) \
-	cy_as_misc_get_gpio_value((cy_as_device_handle)(h), \
-	(cy_as_misc_gpio)(pin), (value), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync version of Set Gpio */
-EXTERN cy_an_return_status_t
-cy_an_misc_set_gpio_value(
-		cy_an_device_handle handle,
-		cy_an_misc_gpio	 pin,
-		uint8_t		  value
-		);
-#define cy_an_misc_set_gpio_value(handle, pin, value) \
-	cy_as_misc_set_gpio_value((cy_as_device_handle)(handle), \
-	(cy_as_misc_gpio)(pin), (value), 0, 0)
-
-/* Async version of Set Gpio */
-EXTERN cy_an_return_status_t
-cy_an_misc_set_gpio_value_e_x(
-		cy_an_device_handle				handle,
-		cy_an_misc_gpio					pin,
-		uint8_t						 value,
-		cy_an_function_callback			cb,
-		uint32_t						client
-		);
-#define cy_an_misc_set_gpio_value_e_x\
-	(h, pin, value, cb, client)	\
-	cy_as_misc_set_gpio_value((cy_as_device_handle)(h), \
-	(cy_as_misc_gpio)(pin), (value), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync version of Enter suspend */
-EXTERN cy_an_return_status_t
-cy_an_misc_enter_suspend(
-		cy_an_device_handle	handle,
-		cy_bool	usb_wakeup_en,
-		cy_bool	gpio_wakeup_en
-		);
-#define cy_an_misc_enter_suspend(handle, usb_wakeup_en, \
-	gpio_wakeup_en) \
-	cy_as_misc_enter_suspend((cy_as_device_handle)(handle), \
-	(usb_wakeup_en), (gpio_wakeup_en), 0, 0)
-
-/* Async version of Enter suspend */
-EXTERN cy_an_return_status_t
-cy_an_misc_enter_suspend_e_x(
-		cy_an_device_handle	handle,
-		cy_bool	usb_wakeup_en,
-		cy_bool	gpio_wakeup_en,
-		cy_an_function_callback	cb,
-		uint32_t client
-		);
-#define cy_an_misc_enter_suspend_e_x(h, usb_en, gpio_en, cb, client)\
-	cy_as_misc_enter_suspend((cy_as_device_handle)(h), (usb_en), \
-	(gpio_en), (cy_as_function_callback)(cb), (client))
-
-/* Sync version of Enter suspend */
-EXTERN cy_an_return_status_t
-cy_an_misc_leave_suspend(
-		cy_an_device_handle				handle
-		);
-#define cy_an_misc_leave_suspend(handle) \
-	cy_as_misc_leave_suspend((cy_as_device_handle)(handle), 0, 0)
-
-/* Async version of Enter suspend */
-EXTERN cy_an_return_status_t
-cy_an_misc_leave_suspend_e_x(
-		cy_an_device_handle				handle,
-		cy_an_function_callback			cb,
-		uint32_t						client
-		);
-
-#define cy_an_misc_leave_suspend_e_x(h, cb, client)		\
-	cy_as_misc_leave_suspend((cy_as_device_handle)(h), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync version of SetLowSpeedSDFreq */
-EXTERN cy_an_return_status_t
-cy_an_misc_set_low_speed_sd_freq(
-		cy_an_device_handle				handle,
-		cy_an_low_speed_sd_freq			  setting
-		);
-#define cy_an_misc_set_low_speed_sd_freq(h, setting)		   \
-	cy_as_misc_set_low_speed_sd_freq((cy_as_device_handle)(h), \
-	(cy_as_low_speed_sd_freq)(setting), 0, 0)
-
-/* Async version of SetLowSpeedSDFreq */
-EXTERN cy_an_return_status_t
-cy_an_misc_set_low_speed_sd_freq_e_x(
-		cy_an_device_handle				handle,
-		cy_an_low_speed_sd_freq			  setting,
-		cy_an_function_callback			cb,
-		uint32_t						client
-		);
-#define cy_an_misc_set_low_speed_sd_freq_e_x\
-(h, setting, cb, client)	\
-	cy_as_misc_set_low_speed_sd_freq((cy_as_device_handle)(h), \
-	(cy_as_low_speed_sd_freq)(setting),	 \
-			(cy_as_function_callback)(cb), (client))
-
-/* SetHighSpeedSDFreq */
-EXTERN cy_an_return_status_t
-cy_an_misc_set_high_speed_sd_freq(
-		cy_an_device_handle				handle,
-		cy_an_high_speed_sd_freq			 setting,
-		cy_an_function_callback			cb,
-		uint32_t						client
-		);
-#define cy_an_misc_set_high_speed_sd_freq(h, setting, cb, client) \
-	cy_as_misc_set_high_speed_sd_freq((cy_as_device_handle)(h), \
-	(cy_as_high_speed_sd_freq)(setting),   \
-			(cy_as_function_callback)(cb), (client))
-
-/* ReserveLNABootArea */
-EXTERN cy_an_return_status_t
-cy_an_misc_reserve_l_n_a_boot_area(
-		cy_an_device_handle handle,
-		uint8_t numzones,
-		cy_an_function_callback cb,
-		uint32_t client);
-#define cy_an_misc_reserve_l_n_a_boot_area(h, num, cb, client) \
-	cy_as_misc_reserve_l_n_a_boot_area((cy_as_device_handle)(h), \
-	num, (cy_as_function_callback)(cb), (client))
-
-/* SetSDPowerPolarity */
-EXTERN cy_an_return_status_t
-cy_an_misc_set_sd_power_polarity(
-		cy_an_device_handle	   handle,
-		cy_an_misc_signal_polarity polarity,
-		cy_an_function_callback   cb,
-		uint32_t			   client);
-#define cy_an_misc_set_sd_power_polarity(h, pol, cb, client) \
-	cy_as_misc_set_sd_power_polarity((cy_as_device_handle)(h), \
-	(cy_as_misc_signal_polarity)(pol),	\
-	(cy_as_function_callback)(cb), (client))
-
-#include "cyas_cplus_end.h"
-
-#endif
-
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanregs.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanregs.h
deleted file mode 100644
index d670291bd24d..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanregs.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*  Cypress West Bridge API header file (cyanregs.h)
- ## Register and field definitions for the Antioch device.
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYANREG_H_
-#define _INCLUDED_CYANREG_H_
-
-#if !defined(__doxygen__)
-
-#define CY_AN_MEM_CM_WB_CFG_ID	(0x80)
-#define		CY_AN_MEM_CM_WB_CFG_ID_VER_MASK	(0x000F)
-#define		CY_AN_MEM_CM_WB_CFG_ID_HDID_MASK (0xFFF0)
-#define		CY_AN_MEM_CM_WB_CFG_ID_HDID_ANTIOCH_VALUE (0xA100)
-#define		CY_AN_MEM_CM_WB_CFG_ID_HDID_ASTORIA_FPGA_VALUE (0x6800)
-#define		CY_AN_MEM_CM_WB_CFG_ID_HDID_ASTORIA_VALUE (0xA200)
-
-
-#define CY_AN_MEM_RST_CTRL_REG (0x81)
-#define		CY_AN_MEM_RST_CTRL_REG_HARD (0x0003)
-#define		CY_AN_MEM_RST_CTRL_REG_SOFT (0x0001)
-#define		CY_AN_MEM_RST_RSTCMPT (0x0004)
-
-#define CY_AN_MEM_P0_ENDIAN	(0x82)
-#define		CY_AN_LITTLE_ENDIAN	 (0x0000)
-#define		CY_AN_BIG_ENDIAN (0x0101)
-
-#define CY_AN_MEM_P0_VM_SET	(0x83)
-#define		CY_AN_MEM_P0_VM_SET_VMTYPE_MASK	(0x0007)
-#define		CY_AN_MEM_P0_VM_SET_VMTYPE_RAM (0x0005)
-#define		CY_AN_MEM_P0_VM_SET_VMTYPE_VMWIDTH (0x0008)
-#define		CY_AN_MEM_P0_VM_SET_VMTYPE_FLOWCTRL (0x0010)
-#define		CY_AN_MEM_P0_VM_SET_IFMODE (0x0020)
-#define		CY_AN_MEM_P0_VM_SET_CFGMODE (0x0040)
-#define		CY_AN_MEM_P0_VM_SET_DACKEOB	(0x0080)
-#define		CY_AN_MEM_P0_VM_SET_OVERRIDE (0x0100)
-#define		CY_AN_MEM_P0_VM_SET_INTOVERD (0x0200)
-#define		CY_AN_MEM_P0_VM_SET_DRQOVERD (0x0400)
-#define		CY_AN_MEM_P0_VM_SET_DRQPOL (0x0800)
-#define		CY_AN_MEM_P0_VM_SET_DACKPOL (0x1000)
-
-
-#define CY_AN_MEM_P0_NV_SET (0x84)
-#define		CY_AN_MEM_P0_NV_SET_WPSWEN (0x0001)
-#define		CY_AN_MEM_P0_NV_SET_WPPOLAR	(0x0002)
-
-#define CY_AN_MEM_PMU_UPDATE (0x85)
-#define		CY_AN_MEM_PMU_UPDATE_UVALID (0x0001)
-#define		CY_AN_MEM_PMU_UPDATE_USBUPDATE (0x0002)
-#define		CY_AN_MEM_PMU_UPDATE_SDIOUPDATE (0x0004)
-
-#define CY_AN_MEM_P0_INTR_REG (0x90)
-#define		CY_AN_MEM_P0_INTR_REG_MCUINT (0x0020)
-#define		CY_AN_MEM_P0_INTR_REG_DRQINT (0x0800)
-#define		CY_AN_MEM_P0_INTR_REG_MBINT	(0x1000)
-#define		CY_AN_MEM_P0_INTR_REG_PMINT	(0x2000)
-#define		 CY_AN_MEM_P0_INTR_REG_PLLLOCKINT (0x4000)
-
-#define CY_AN_MEM_P0_INT_MASK_REG (0x91)
-#define		CY_AN_MEM_P0_INT_MASK_REG_MMCUINT (0x0020)
-#define		CY_AN_MEM_P0_INT_MASK_REG_MDRQINT (0x0800)
-#define		CY_AN_MEM_P0_INT_MASK_REG_MMBINT (0x1000)
-#define		CY_AN_MEM_P0_INT_MASK_REG_MPMINT (0x2000)
-#define		CY_AN_MEM_P0_INT_MASK_REG_MPLLLOCKINT (0x4000)
-
-#define CY_AN_MEM_MCU_MB_STAT (0x92)
-#define		CY_AN_MEM_P0_MCU_MBNOTRD (0x0001)
-
-#define CY_AN_MEM_P0_MCU_STAT (0x94)
-#define		CY_AN_MEM_P0_MCU_STAT_CARDINS (0x0001)
-#define		CY_AN_MEM_P0_MCU_STAT_CARDREM (0x0002)
-
-#define CY_AN_MEM_PWR_MAGT_STAT	(0x95)
-#define		CY_AN_MEM_PWR_MAGT_STAT_WAKEUP (0x0001)
-
-#define CY_AN_MEM_P0_RSE_ALLOCATE (0x98)
-#define		CY_AN_MEM_P0_RSE_ALLOCATE_SDIOAVI (0x0001)
-#define		CY_AN_MEM_P0_RSE_ALLOCATE_SDIOALLO (0x0002)
-#define		CY_AN_MEM_P0_RSE_ALLOCATE_NANDAVI (0x0004)
-#define		CY_AN_MEM_P0_RSE_ALLOCATE_NANDALLO (0x0008)
-#define		CY_AN_MEM_P0_RSE_ALLOCATE_USBAVI (0x0010)
-#define		CY_AN_MEM_P0_RSE_ALLOCATE_USBALLO (0x0020)
-
-#define CY_AN_MEM_P0_RSE_MASK (0x9A)
-#define		CY_AN_MEM_P0_RSE_MASK_MSDIOBUS_RW (0x0003)
-#define		CY_AN_MEM_P0_RSE_MASK_MNANDBUS_RW (0x00C0)
-#define		CY_AN_MEM_P0_RSE_MASK_MUSBBUS_RW (0x0030)
-
-#define CY_AN_MEM_P0_DRQ (0xA0)
-#define		CY_AN_MEM_P0_DRQ_EP2DRQ (0x0004)
-#define		CY_AN_MEM_P0_DRQ_EP3DRQ	(0x0008)
-#define		CY_AN_MEM_P0_DRQ_EP4DRQ	(0x0010)
-#define		CY_AN_MEM_P0_DRQ_EP5DRQ	(0x0020)
-#define		CY_AN_MEM_P0_DRQ_EP6DRQ	(0x0040)
-#define		CY_AN_MEM_P0_DRQ_EP7DRQ	(0x0080)
-#define		CY_AN_MEM_P0_DRQ_EP8DRQ	(0x0100)
-#define		CY_AN_MEM_P0_DRQ_EP9DRQ	(0x0200)
-#define		CY_AN_MEM_P0_DRQ_EP10DRQ (0x0400)
-#define		CY_AN_MEM_P0_DRQ_EP11DRQ (0x0800)
-#define		CY_AN_MEM_P0_DRQ_EP12DRQ (0x1000)
-#define		CY_AN_MEM_P0_DRQ_EP13DRQ (0x2000)
-#define		CY_AN_MEM_P0_DRQ_EP14DRQ (0x4000)
-#define		CY_AN_MEM_P0_DRQ_EP15DRQ (0x8000)
-
-#define CY_AN_MEM_P0_DRQ_MASK	(0xA1)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP2DRQ (0x0004)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP3DRQ (0x0008)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP4DRQ (0x0010)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP5DRQ (0x0020)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP6DRQ (0x0040)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP7DRQ (0x0080)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP8DRQ (0x0100)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP9DRQ (0x0200)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP10DRQ (0x0400)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP11DRQ (0x0800)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP12DRQ (0x1000)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP13DRQ (0x2000)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP14DRQ (0x4000)
-#define		CY_AN_MEM_P0_DRQ_MASK_MEP15DRQ (0x8000)
-
-#define CY_AN_MEM_P0_EP2_DMA_REG (0xA2)
-#define		CY_AN_MEM_P0_E_pn_DMA_REG_COUNT_MASK (0x7FF)
-#define		CY_AN_MEM_P0_E_pn_DMA_REG_DMAVAL (1 << 12)
-#define CY_AN_MEM_P0_EP3_DMA_REG (0xA3)
-#define CY_AN_MEM_P0_EP4_DMA_REG (0xA4)
-#define CY_AN_MEM_P0_EP5_DMA_REG (0xA5)
-#define CY_AN_MEM_P0_EP6_DMA_REG (0xA6)
-#define CY_AN_MEM_P0_EP7_DMA_REG (0xA7)
-#define CY_AN_MEM_P0_EP8_DMA_REG (0xA8)
-#define CY_AN_MEM_P0_EP9_DMA_REG (0xA9)
-#define CY_AN_MEM_P0_EP10_DMA_REG (0xAA)
-#define CY_AN_MEM_P0_EP11_DMA_REG (0xAB)
-#define CY_AN_MEM_P0_EP12_DMA_REG (0xAC)
-#define CY_AN_MEM_P0_EP13_DMA_REG (0xAD)
-#define CY_AN_MEM_P0_EP14_DMA_REG (0xAE)
-#define CY_AN_MEM_P0_EP15_DMA_REG (0xAF)
-
-#define CY_AN_MEM_IROS_IO_CFG (0xC1)
-#define	 CY_AN_MEM_IROS_IO_CFG_GPIODRVST_MASK (0x0003)
-#define		CY_AN_MEM_IROS_IO_CFG_GPIOSLEW_MASK (0x0004)
-#define	 CY_AN_MEM_IROS_IO_CFG_PPIODRVST_MASK (0x0018)
-#define	 CY_AN_MEM_IROS_IO_CFG_PPIOSLEW_MASK (0x0020)
-#define		CY_AN_MEM_IROS_IO_CFG_SSIODRVST_MASK (0x0300)
-#define	 CY_AN_MEM_IROS_IO_CFG_SSIOSLEW_MASK (0x0400)
-#define	 CY_AN_MEM_IROS_IO_CFG_SNIODRVST_MASK (0x1800)
-#define		CY_AN_MEM_IROS_IO_CFG_SNIOSLEW_MASK (0x2000)
-
-#define CY_AN_MEM_PLL_LOCK_LOSS_STAT (0xC4)
-#define		 CY_AN_MEM_PLL_LOCK_LOSS_STAT_PLLSTAT (0x0800)
-
-#define CY_AN_MEM_P0_MAILBOX0 (0xF0)
-#define CY_AN_MEM_P0_MAILBOX1 (0xF1)
-#define CY_AN_MEM_P0_MAILBOX2 (0xF2)
-#define CY_AN_MEM_P0_MAILBOX3 (0xF3)
-
-#define CY_AN_MEM_MCU_MAILBOX0 (0xF8)
-#define CY_AN_MEM_MCU_MAILBOX1 (0xF9)
-#define CY_AN_MEM_MCU_MAILBOX2 (0xFA)
-#define CY_AN_MEM_MCU_MAILBOX3 (0xFB)
-
-#endif				/* !defined(__doxygen__) */
-
-#endif				/* _INCLUDED_CYANREG_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyansdkversion.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyansdkversion.h
deleted file mode 100644
index ac26b9556dda..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyansdkversion.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Cypress Antioch Sdk Version file (cyansdkversion.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYANSDK_VERSION_H_
-#define _INCLUDED_CYANSDK_VERSION_H_
-
-/* Antioch SDK version 1.3.2 */
-#define CYAN_MAJOR_VERSION (1)
-#define CYAN_MINOR_VERSION (3)
-#define CYAN_BUILD_NUMBER (473)
-
-#endif /*_INCLUDED_CYANSDK_VERSION_H_*/
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanstorage.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanstorage.h
deleted file mode 100644
index deb9af87fff4..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanstorage.h
+++ /dev/null
@@ -1,419 +0,0 @@
-/*  Cypress West Bridge API header file (cyanstorage.h)
- ## Header for backward compatibility with previous releases of Antioch SDK.
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYANSTORAGE_H_
-#define _INCLUDED_CYANSTORAGE_H_
-#ifndef __doxygen__
-
-#include "cyanmedia.h"
-#include "cyanmisc.h"
-#include "cyasstorage.h"
-#include "cyas_cplus_start.h"
-
-#define CY_AN_LUN_PHYSICAL_DEVICE (CY_AS_LUN_PHYSICAL_DEVICE)
-#define CY_AN_STORAGE_EP_SIZE (CY_AS_STORAGE_EP_SIZE)
-
-#define	cy_an_storage_antioch	cy_as_storage_antioch
-#define	cy_an_storage_processor	cy_as_storage_processor
-#define	cy_an_storage_removed	cy_as_storage_removed
-#define	cy_an_storage_inserted	cy_as_storage_inserted
-#define	cy_an_sdio_interrupt	cy_as_sdio_interrupt
-typedef cy_as_storage_event	cy_an_storage_event;
-
-#define	cy_an_op_read	 cy_as_op_read
-#define	cy_an_op_write	 cy_as_op_write
-typedef cy_as_oper_type cy_an_oper_type;
-
-typedef cy_as_device_desc cy_an_device_desc;
-
-typedef cy_as_unit_desc cy_an_unit_desc;
-
-typedef cy_as_storage_callback_dep \
-	cy_an_storage_callback;
-
-typedef cy_as_storage_event_callback_dep \
-	cy_an_storage_event_callback;
-
-#define	cy_an_sd_reg_OCR cy_as_sd_reg_OCR
-#define	cy_an_sd_reg_CID cy_as_sd_reg_CID
-#define	cy_an_sd_reg_CSD cy_as_sd_reg_CSD
-typedef cy_as_sd_card_reg_type \
-	cy_an_sd_card_reg_type;
-
-typedef cy_as_storage_query_device_data_dep \
-	cy_an_storage_query_device_data;
-
-typedef cy_as_storage_query_unit_data_dep \
-	cy_an_storage_query_unit_data;
-
-typedef cy_as_storage_sd_reg_read_data \
-	cy_an_storage_sd_reg_read_data;
-
-#define CY_AN_SD_REG_OCR_LENGTH (CY_AS_SD_REG_OCR_LENGTH)
-#define CY_AN_SD_REG_CID_LENGTH	(CY_AS_SD_REG_CID_LENGTH)
-#define CY_AN_SD_REG_CSD_LENGTH	(CY_AS_SD_REG_CSD_LENGTH)
-#define CY_AN_SD_REG_MAX_RESP_LENGTH \
-	(CY_AS_SD_REG_MAX_RESP_LENGTH)
-
-/**** API Functions ******/
-
-/* Sync version of Storage Start */
-EXTERN cy_an_return_status_t
-cy_an_storage_start(
-	cy_an_device_handle		handle
-	);
-#define cy_an_storage_start(handle) \
-	cy_as_storage_start((cy_as_device_handle)(handle), 0, 0)
-
-/* Async version of Storage Start */
-EXTERN cy_an_return_status_t
-cy_an_storage_start_e_x(
-	cy_an_device_handle	handle,
-	cy_an_function_callback	cb,
-	uint32_t		client
-	);
-#define cy_an_storage_start_e_x(h, cb, client) \
-	cy_as_storage_start((cy_as_device_handle)(h), \
-		(cy_as_function_callback)(cb), (client))
-
-/* Sync version of Storage Stop */
-EXTERN cy_an_return_status_t
-cy_an_storage_stop(
-	cy_an_device_handle		handle
-	);
-#define cy_an_storage_stop(handle) \
-	cy_as_storage_stop((cy_as_device_handle)(handle), 0, 0)
-
-/* Async version of Storage Stop */
-EXTERN cy_an_return_status_t
-cy_an_storage_stop_e_x(
-	cy_an_device_handle	handle,
-	cy_an_function_callback	cb,
-	uint32_t		client
-	);
-#define cy_an_storage_stop_e_x(h, cb, client)		\
-	cy_as_storage_stop((cy_as_device_handle)(h), \
-		(cy_as_function_callback)(cb), (client))
-
-/* Register Call back api */
-EXTERN cy_an_return_status_t
-cy_an_storage_register_callback(
-	cy_an_device_handle			handle,
-	cy_an_storage_event_callback	callback
-	);
-#define cy_an_storage_register_callback(h, cb)		\
-	cy_as_storage_register_callback_dep((cy_as_device_handle)(h), \
-	(cy_as_storage_event_callback_dep)(cb))
-
-/* Sync version of Storage Claim */
-EXTERN cy_an_return_status_t
-cy_an_storage_claim(
-	cy_an_device_handle		handle,
-	cy_an_media_type			type
-	);
-#define cy_an_storage_claim(h, type)			\
-	cy_as_storage_claim_dep((cy_as_device_handle)(h), \
-	(cy_as_media_type)(type))
-
-/* Async version of Storage Claim */
-EXTERN cy_an_return_status_t
-cy_an_storage_claim_e_x(
-	cy_an_device_handle		handle,
-	cy_an_media_type *type,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_storage_claim_e_x(h, type_p, cb, client)		\
-	cy_as_storage_claim_dep_EX((cy_as_device_handle)(h), \
-	(cy_as_media_type *)(type_p), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync Version of Storage Release */
-EXTERN cy_an_return_status_t
-cy_an_storage_release(
-	cy_an_device_handle		handle,
-	cy_an_media_type			type
-	);
-#define cy_an_storage_release(h, type)			\
-	cy_as_storage_release_dep((cy_as_device_handle)(h), \
-	(cy_as_media_type)(type))
-
-/* Async Version of Storage Release */
-EXTERN cy_an_return_status_t
-cy_an_storage_release_e_x(
-	cy_an_device_handle		handle,
-	cy_an_media_type *type,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_storage_release_e_x(h, type_p, cb, client)	\
-	cy_as_storage_release_dep_EX((cy_as_device_handle)(h), \
-	(cy_as_media_type *)(type_p), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync version of Query Media */
-EXTERN cy_an_return_status_t
-cy_an_storage_query_media(
-	cy_an_device_handle		handle,
-	cy_an_media_type			type,
-	uint32_t *count
-	);
-#define cy_an_storage_query_media(handle, type, count) \
-	cy_as_storage_query_media((cy_as_device_handle)(handle), \
-	(cy_as_media_type)(type), (count), 0, 0)
-
-/* Async version of Query Media */
-EXTERN cy_an_return_status_t
-cy_an_storage_query_media_e_x(
-	cy_an_device_handle		handle,
-	cy_an_media_type			type,
-	uint32_t *count,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_storage_query_media_e_x(h, type, count, cb, client) \
-	cy_as_storage_query_media((cy_as_device_handle)(h), \
-	(cy_as_media_type)(type), (count), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync version of Query device */
-EXTERN cy_an_return_status_t
-cy_an_storage_query_device(
-	cy_an_device_handle		handle,
-	cy_an_media_type			type,
-	uint32_t			device,
-	cy_an_device_desc *desc_p
-	);
-#define cy_an_storage_query_device(h, type, device, desc_p) \
-	cy_as_storage_query_device_dep((cy_as_device_handle)(h), \
-	(cy_as_media_type)(type), (device), (cy_as_device_desc *)(desc_p))
-
-/* Async version of Query device */
-EXTERN cy_an_return_status_t
-cy_an_storage_query_device_e_x(
-	cy_an_device_handle		handle,
-	cy_an_storage_query_device_data *data,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_storage_query_device_e_x(h, data, cb, client) \
-	cy_as_storage_query_device_dep_EX((cy_as_device_handle)(h), \
-	(cy_as_storage_query_device_data_dep *)(data),	\
-		(cy_as_function_callback)(cb), (client))
-
-/* Sync version of Query Unit */
-EXTERN cy_an_return_status_t
-cy_an_storage_query_unit(
-	cy_an_device_handle		handle,
-	cy_an_media_type			type,
-	uint32_t			device,
-	uint32_t			unit,
-	cy_an_unit_desc *desc_p
-	);
-#define cy_an_storage_query_unit(h, type, device, unit, desc_p)	\
-	cy_as_storage_query_unit_dep((cy_as_device_handle)(h), \
-	(cy_as_media_type)(type), (device), \
-	(unit), (cy_as_unit_desc *)(desc_p))
-
-/* Async version of Query Unit */
-EXTERN cy_an_return_status_t
-cy_an_storage_query_unit_e_x(
-	cy_an_device_handle		handle,
-	cy_an_storage_query_unit_data *data_p,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_storage_query_unit_e_x(h, data_p, cb, client)	\
-	cy_as_storage_query_unit_dep_EX((cy_as_device_handle)(h), \
-	(cy_as_storage_query_unit_data_dep *)(data_p),	\
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync version of device control */
-EXTERN cy_an_return_status_t
-cy_an_storage_device_control(
-		cy_an_device_handle	handle,
-		cy_bool	 card_detect_en,
-		cy_bool	 write_prot_en
-		);
-#define cy_an_storage_device_control(handle, \
-	card_detect_en, write_prot_en) \
-	cy_as_storage_device_control_dep((cy_as_device_handle)(handle), \
-	(card_detect_en), (write_prot_en), 0, 0)
-
-/* Async version of device control */
-EXTERN cy_an_return_status_t
-cy_an_storage_device_control_e_x(
-		cy_an_device_handle				handle,
-		cy_bool			card_detect_en,
-		cy_bool			write_prot_en,
-	cy_an_function_callback		cb,
-	uint32_t			client
-		);
-#define cy_an_storage_device_control_e_x(h, det_en, prot_en, cb, client) \
-	cy_as_storage_device_control_dep((cy_as_device_handle)(h), (det_en), \
-	(prot_en), (cy_as_function_callback)(cb), (client))
-
-/* Sync Read */
-EXTERN cy_an_return_status_t
-cy_an_storage_read(
-	cy_an_device_handle		handle,
-	cy_an_media_type			type,
-	uint32_t			device,
-	uint32_t			unit,
-	uint32_t			block,
-	void *data_p,
-	uint16_t			num_blocks
-	);
-#define cy_an_storage_read(h, type, device, unit, block, data_p, nblks)	\
-	cy_as_storage_read_dep((cy_as_device_handle)(h), \
-	(cy_as_media_type)(type), (device), (unit), \
-	(block), (data_p), (nblks))
-
-/* Async Read */
-EXTERN cy_an_return_status_t
-cy_an_storage_read_async(
-	cy_an_device_handle		handle,
-	cy_an_media_type			type,
-	uint32_t			device,
-	uint32_t			unit,
-	uint32_t			block,
-	void *data_p,
-	uint16_t			num_blocks,
-	cy_an_storage_callback		callback
-	);
-#define cy_an_storage_read_async(h, type, device, unit, \
-	block, data_p, nblks, cb)				\
-	cy_as_storage_read_async_dep((cy_as_device_handle)(h), \
-	(cy_as_media_type)(type), (device), (unit), (block), \
-		(data_p), (nblks), (cy_as_storage_callback_dep)(cb))
-
-/* Sync Write */
-EXTERN cy_an_return_status_t
-cy_an_storage_write(
-	cy_an_device_handle		handle,
-	cy_an_media_type			type,
-	uint32_t			device,
-	uint32_t			unit,
-	uint32_t			block,
-	void *data_p,
-	uint16_t			num_blocks
-	);
-#define cy_an_storage_write(h, type, device, unit, \
-	block, data_p, nblks)	\
-	cy_as_storage_write_dep((cy_as_device_handle)(h), \
-	(cy_as_media_type)(type), (device), (unit), \
-	(block), (data_p), (nblks))
-
-/* Async Write */
-EXTERN cy_an_return_status_t
-cy_an_storage_write_async(
-	cy_an_device_handle		handle,
-	cy_an_media_type			type,
-	uint32_t			device,
-	uint32_t			unit,
-	uint32_t			block,
-	void *data_p,
-	uint16_t			num_blocks,
-	cy_an_storage_callback		callback
-	);
-#define cy_an_storage_write_async(h, type, device, unit, \
-	block, data_p, nblks, cb) \
-	cy_as_storage_write_async_dep((cy_as_device_handle)(h), \
-	(cy_as_media_type)(type), (device), (unit), (block), \
-		(data_p), (nblks), (cy_as_storage_callback_dep)(cb))
-
-/* Cancel Async */
-EXTERN cy_an_return_status_t
-cy_an_storage_cancel_async(
-	cy_an_device_handle		handle
-	);
-#define cy_an_storage_cancel_async(h) \
-	cy_as_storage_cancel_async((cy_as_device_handle)(h))
-
-/* Sync SD Register Read*/
-EXTERN cy_an_return_status_t
-cy_an_storage_sd_register_read(
-		cy_an_device_handle		  handle,
-	cy_an_media_type		  type,
-	uint8_t				  device,
-	cy_an_sd_card_reg_type		 reg_type,
-	uint8_t				   read_len,
-	uint8_t				  *data_p
-		);
-#define cy_an_storage_sd_register_read(h, type, device, \
-	reg_type, len, data_p) \
-	cy_as_storage_sd_register_read_dep((cy_as_device_handle)(h), \
-	(cy_as_media_type)(type), (device),	 \
-	(cy_as_sd_card_reg_type)(reg_type), (len), (data_p))
-
-/*Async SD Register Read*/
-EXTERN cy_an_return_status_t
-cy_an_storage_sd_register_read_e_x(
-		cy_an_device_handle		  handle,
-	cy_an_media_type		  type,
-	uint8_t				  device,
-	cy_an_sd_card_reg_type		 reg_type,
-	cy_an_storage_sd_reg_read_data *data_p,
-	cy_an_function_callback	  cb,
-	uint32_t				  client
-		);
-#define cy_an_storage_sd_register_read_e_x(h, type, device, \
-	reg_type, data_p, cb, client) \
-	cy_as_storage_sd_register_read_dep_EX((cy_as_device_handle)(h), \
-	(cy_as_media_type)(type), (device),	\
-	(cy_as_sd_card_reg_type)(reg_type), \
-	(cy_as_storage_sd_reg_read_data *)(data_p),	\
-	(cy_as_function_callback)(cb), (client))
-
-/* Create partition on storage device */
-EXTERN cy_an_return_status_t
-cy_an_storage_create_p_partition(
-		cy_an_device_handle	 handle,
-		cy_an_media_type		media,
-		uint32_t			 device,
-		uint32_t			 size,
-		cy_an_function_callback cb,
-		uint32_t			 client);
-#define cy_an_storage_create_p_partition(h, media, dev, \
-	size, cb, client) \
-	cy_as_storage_create_p_partition_dep((cy_as_device_handle)(h), \
-	(cy_as_media_type)(media), (dev), \
-	(size), (cy_as_function_callback)(cb), (client))
-
-/* Remove partition on storage device */
-EXTERN cy_an_return_status_t
-cy_an_storage_remove_p_partition(
-		cy_an_device_handle		handle,
-		cy_an_media_type		   media,
-		uint32_t				device,
-		cy_an_function_callback	cb,
-		uint32_t				client);
-#define cy_an_storage_remove_p_partition\
-(h, media, dev, cb, client)	 \
-	cy_as_storage_remove_p_partition_dep((cy_as_device_handle)(h), \
-	(cy_as_media_type)(media), (dev),	   \
-			(cy_as_function_callback)(cb), (client))
-
-#include "cyas_cplus_end.h"
-#endif /*__doxygen__ */
-
-#endif
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyantioch.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyantioch.h
deleted file mode 100644
index d65b35a14ae1..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyantioch.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Cypress West Bridge API header file (cyastioch.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYANTIOCH_H_
-#define _INCLUDED_CYANTIOCH_H_
-
-#if !defined(__doxygen__)
-
-#include "cyanerr.h"
-#include "cyanmisc.h"
-#include "cyanstorage.h"
-#include "cyanusb.h"
-#include "cyanch9.h"
-
-#endif
-
-#endif
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyantypes.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyantypes.h
deleted file mode 100644
index 48cd50f13c12..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyantypes.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*  Cypress West Bridge API header file (cyantypes.h)
-## Type definitions for backward compatibility with previous
-## Antioch SDK releases.
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYANTYPES_H_
-#define _INCLUDED_CYANTYPES_H_
-
-#include "cyastypes.h"
-typedef cy_as_end_point_number_t cy_an_end_point_number_t;
-typedef cy_as_return_status_t cy_an_return_status_t;
-typedef cy_as_bus_number_t cy_an_bus_number_t;
-#endif
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanusb.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanusb.h
deleted file mode 100644
index 1e4e7dbe31b0..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyanusb.h
+++ /dev/null
@@ -1,619 +0,0 @@
-/*  Cypress West Bridge API header file (cyanusb.h)
- ## Header for backward compatibility with previous Antioch SDK releases.
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYANUSB_H_
-#define _INCLUDED_CYANUSB_H_
-
-#if !defined(__doxygen__)
-
-#include "cyanmisc.h"
-#include "cyasusb.h"
-#include "cyas_cplus_start.h"
-
-#define CY_AN_MAX_USB_DESCRIPTOR_SIZE (CY_AS_MAX_USB_DESCRIPTOR_SIZE)
-
-typedef cy_as_usb_inquiry_data_dep cy_an_usb_inquiry_data;
-typedef cy_as_usb_unknown_command_data_dep \
-	cy_an_usb_unknown_command_data;
-typedef cy_as_usb_start_stop_data_dep cy_an_usb_start_stop_data;
-typedef cy_as_m_s_c_progress_data cy_an_m_s_c_progress_data;
-
-#define cy_an_usb_nand_enum cy_as_usb_nand_enum
-#define cy_an_usb_sd_enum cy_as_usb_sd_enum
-#define cy_an_usb_mmc_enum cy_as_usb_mmc_enum
-#define cy_an_usb_ce_ata_enum cy_as_usb_ce_ata_enum
-typedef cy_as_usb_mass_storage_enum cy_an_usb_mass_storage_enum;
-
-#define cy_an_usb_desc_device cy_as_usb_desc_device
-#define cy_an_usb_desc_device_qual cy_as_usb_desc_device_qual
-#define cy_an_usb_desc_f_s_configuration \
-	cy_as_usb_desc_f_s_configuration
-#define cy_an_usb_desc_h_s_configuration \
-	cy_as_usb_desc_h_s_configuration
-#define cy_an_usb_desc_string cy_as_usb_desc_string
-typedef cy_as_usb_desc_type cy_an_usb_desc_type;
-
-#define cy_an_usb_in	cy_as_usb_in
-#define cy_an_usb_out	cy_as_usb_out
-#define cy_an_usb_in_out	cy_as_usb_in_out
-typedef cy_as_usb_end_point_dir cy_an_usb_end_point_dir;
-
-
-#define cy_an_usb_control cy_as_usb_control
-#define cy_an_usb_iso cy_as_usb_iso
-#define cy_an_usb_bulk cy_as_usb_bulk
-#define cy_an_usb_int cy_as_usb_int
-typedef cy_as_usb_end_point_type cy_an_usb_end_point_type;
-
-
-typedef cy_as_usb_enum_control_dep cy_an_usb_enum_control;
-typedef cy_as_usb_end_point_config cy_an_usb_end_point_config;
-
-#define cy_an_usb_m_s_unit0	cy_as_usb_m_s_unit0
-#define cy_an_usb_m_s_unit1	cy_as_usb_m_s_unit1
-#define cy_an_usb_m_s_both cy_as_usb_m_s_both
-typedef cy_as_usb_m_s_type_t cy_an_usb_m_s_type_t;
-
-#define cy_an_event_usb_suspend	cy_as_event_usb_suspend
-#define cy_an_event_usb_resume cy_as_event_usb_resume
-#define cy_an_event_usb_reset cy_as_event_usb_reset
-#define cy_an_event_usb_set_config cy_as_event_usb_set_config
-#define cy_an_event_usb_speed_change cy_as_event_usb_speed_change
-#define cy_an_event_usb_setup_packet cy_as_event_usb_setup_packet
-#define cy_an_event_usb_status_packet cy_as_event_usb_status_packet
-#define cy_an_event_usb_inquiry_before	cy_as_event_usb_inquiry_before
-#define cy_an_event_usb_inquiry_after cy_as_event_usb_inquiry_after
-#define cy_an_event_usb_start_stop cy_as_event_usb_start_stop
-#define cy_an_event_usb_unknown_storage	cy_as_event_usb_unknown_storage
-#define cy_an_event_usb_m_s_c_progress cy_as_event_usb_m_s_c_progress
-typedef cy_as_usb_event cy_an_usb_event;
-
-typedef cy_as_usb_event_callback_dep cy_an_usb_event_callback;
-
-typedef cy_as_usb_io_callback cy_an_usb_io_callback;
-typedef cy_as_usb_function_callback cy_an_usb_function_callback;
-
-/******* USB Functions ********************/
-
-/* Sync Usb Start */
-extern cy_an_return_status_t
-cy_an_usb_start(
-	cy_an_device_handle		handle
-	);
-#define cy_an_usb_start(handle) \
-	cy_as_usb_start((cy_as_device_handle)(handle), 0, 0)
-
-/*Async Usb Start */
-extern cy_an_return_status_t
-cy_an_usb_start_e_x(
-	cy_an_device_handle		handle,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_start_e_x(h, cb, client) \
-	cy_as_usb_start((cy_as_device_handle)(h), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync Usb Stop */
-extern cy_an_return_status_t
-cy_an_usb_stop(
-	cy_an_device_handle		handle
-	);
-#define cy_an_usb_stop(handle) \
-	cy_as_usb_stop((cy_as_device_handle)(handle), 0, 0)
-
-/*Async Usb Stop */
-extern cy_an_return_status_t
-cy_an_usb_stop_e_x(
-	cy_an_device_handle		handle,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_stop_e_x(h, cb, client) \
-	cy_as_usb_stop((cy_as_device_handle)(h), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Register USB event callback */
-EXTERN cy_an_return_status_t
-cy_an_usb_register_callback(
-	cy_an_device_handle		handle,
-	cy_an_usb_event_callback		callback
-	);
-#define cy_an_usb_register_callback(h, cb) \
-	cy_as_usb_register_callback_dep((cy_as_device_handle)(h), \
-	(cy_as_usb_event_callback_dep)(cb))
-
-/*Sync Usb connect */
-EXTERN cy_an_return_status_t
-cy_an_usb_connect(
-	cy_an_device_handle		handle
-	);
-#define cy_an_usb_connect(handle) \
-	cy_as_usb_connect((cy_as_device_handle)(handle), 0, 0)
-
-/*Async Usb connect */
-extern cy_an_return_status_t
-cy_an_usb_connect_e_x(
-	cy_an_device_handle		handle,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_connect_e_x(h, cb, client)		\
-	cy_as_usb_connect((cy_as_device_handle)(h), \
-	(cy_as_function_callback)(cb), (client))
-
-/*Sync Usb disconnect */
-EXTERN cy_an_return_status_t
-cy_an_usb_disconnect(
-	cy_an_device_handle		handle
-	);
-#define cy_an_usb_disconnect(handle) \
-	cy_as_usb_disconnect((cy_as_device_handle)(handle), 0, 0)
-
-/*Async Usb disconnect */
-extern cy_an_return_status_t
-cy_an_usb_disconnect_e_x(
-	cy_an_device_handle		handle,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_disconnect_e_x(h, cb, client)	\
-	cy_as_usb_disconnect((cy_as_device_handle)(h), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync version of set enum config */
-EXTERN cy_an_return_status_t
-cy_an_usb_set_enum_config(
-	cy_an_device_handle	handle,
-	cy_an_usb_enum_control *config_p
-	);
-#define cy_an_usb_set_enum_config(handle, config_p) \
-	cy_as_usb_set_enum_config_dep((cy_as_device_handle)(handle), \
-	(cy_as_usb_enum_control_dep *)(config_p), 0, 0)
-
-/* Async version of set enum config */
-extern cy_an_return_status_t
-cy_an_usb_set_enum_config_e_x(
-	cy_an_device_handle		handle,
-	cy_an_usb_enum_control *config_p,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_set_enum_config_e_x(h, config_p, cb, client) \
-	cy_as_usb_set_enum_config_dep((cy_as_device_handle)(h), \
-	(cy_as_usb_enum_control_dep *)(config_p),	 \
-		(cy_as_function_callback)(cb), (client))
-
-/* Sync version of get enum config */
-EXTERN cy_an_return_status_t
-cy_an_usb_get_enum_config(
-	cy_an_device_handle		handle,
-	cy_an_usb_enum_control *config_p
-	);
-#define cy_an_usb_get_enum_config(handle, config_p) \
-	cy_as_usb_get_enum_config_dep((cy_as_device_handle)(handle), \
-	(cy_as_usb_enum_control_dep *)(config_p), 0, 0)
-
-/* Async version of get enum config */
-extern cy_an_return_status_t
-cy_an_usb_get_enum_config_e_x(
-	cy_an_device_handle		handle,
-	cy_an_usb_enum_control *config_p,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_get_enum_config_e_x(h, config_p, cb, client) \
-	cy_as_usb_get_enum_config_dep((cy_as_device_handle)(h), \
-	(cy_as_usb_enum_control_dep *)(config_p),	 \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync Version of Set descriptor */
-EXTERN cy_an_return_status_t
-cy_an_usb_set_descriptor(
-	cy_an_device_handle		handle,
-	cy_an_usb_desc_type			type,
-	uint8_t				index,
-	void *desc_p,
-	uint16_t			length
-	);
-#define cy_an_usb_set_descriptor(handle, type, index, desc_p, length) \
-	cy_as_usb_set_descriptor((cy_as_device_handle)(handle), \
-	(cy_as_usb_desc_type)(type), (index), (desc_p), (length), 0, 0)
-
-/* Async Version of Set descriptor */
-extern cy_an_return_status_t
-cy_an_usb_set_descriptor_e_x(
-	cy_an_device_handle		handle,
-	cy_an_usb_desc_type			type,
-	uint8_t				index,
-	void *desc_p,
-	uint16_t			length,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_set_descriptor_e_x\
-	(h, type, index, desc_p, length, cb, client) \
-	cy_as_usb_set_descriptor((cy_as_device_handle)(h), \
-	(cy_as_usb_desc_type)(type), (index), (desc_p), (length), \
-		(cy_as_function_callback)(cb), (client))
-
-/* Only version of clear descriptors */
-EXTERN cy_an_return_status_t
-cy_an_usb_clear_descriptors(
-	cy_an_device_handle		handle,
-		cy_an_function_callback			cb,
-		uint32_t						client
-	);
-#define cy_an_usb_clear_descriptors(h, cb, client) \
-	cy_as_usb_clear_descriptors((cy_as_device_handle)(h), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync version of get descriptor*/
-EXTERN cy_an_return_status_t
-cy_an_usb_get_descriptor(
-	cy_an_device_handle	handle,
-	cy_an_usb_desc_type		type,
-	uint8_t			index,
-	void *desc_p,
-	uint32_t *length_p
-	);
-#define cy_an_usb_get_descriptor(h, type, index, desc_p, length_p)	\
-	cy_as_usb_get_descriptor_dep((cy_as_device_handle)(h), \
-	(cy_as_usb_desc_type)(type), (index), (desc_p), (length_p))
-
-typedef cy_as_get_descriptor_data cy_an_get_descriptor_data;
-
-/* Async version of get descriptor */
-extern cy_an_return_status_t
-cy_an_usb_get_descriptor_e_x(
-	cy_an_device_handle		handle,
-	cy_an_usb_desc_type			type,
-	uint8_t				index,
-	cy_an_get_descriptor_data *data,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_get_descriptor_e_x\
-	(h, type, index, data, cb, client) \
-	cy_as_usb_get_descriptor((cy_as_device_handle)(h), \
-	(cy_as_usb_desc_type)(type), (index), \
-	(cy_as_get_descriptor_data *)(data), \
-		(cy_as_function_callback)(cb), (client))
-
-EXTERN cy_an_return_status_t
-cy_an_usb_set_physical_configuration(
-	cy_an_device_handle		handle,
-	uint8_t			config
-	);
-#define cy_an_usb_set_physical_configuration(h, config)	\
-	cy_as_usb_set_physical_configuration\
-	((cy_as_device_handle)(h), (config))
-
-EXTERN cy_an_return_status_t
-cy_an_usb_set_end_point_config(
-	cy_an_device_handle			handle,
-	cy_an_end_point_number_t		ep,
-	cy_an_usb_end_point_config *config_p
-	);
-#define cy_an_usb_set_end_point_config(h, ep, config_p)	\
-	cy_as_usb_set_end_point_config((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), \
-	(cy_as_usb_end_point_config *)(config_p))
-
-EXTERN cy_an_return_status_t
-cy_an_usb_get_end_point_config(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	cy_an_usb_end_point_config *config_p
-	);
-#define cy_an_usb_get_end_point_config(h, ep, config_p)	\
-	cy_as_usb_get_end_point_config((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), \
-	(cy_as_usb_end_point_config *)(config_p))
-
-/* Sync version of commit */
-EXTERN cy_an_return_status_t
-cy_an_usb_commit_config(
-	cy_an_device_handle		handle
-	);
-#define cy_an_usb_commit_config(handle) \
-	cy_as_usb_commit_config((cy_as_device_handle)(handle), 0, 0)
-
-/* Async version of commit */
-extern cy_an_return_status_t
-cy_an_usb_commit_config_e_x(
-	cy_an_device_handle		handle,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_commit_config_e_x(h, cb, client)	\
-	cy_as_usb_commit_config((cy_as_device_handle)(h), \
-	(cy_as_function_callback)(cb), (client))
-
-EXTERN cy_an_return_status_t
-cy_an_usb_read_data(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	cy_bool				pktread,
-	uint32_t			dsize,
-	uint32_t *dataread,
-	void *data
-	);
-#define cy_an_usb_read_data(h, ep, pkt, dsize, dataread, data_p) \
-	cy_as_usb_read_data((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), (pkt), (dsize), \
-	(dataread), (data_p))
-
-EXTERN cy_an_return_status_t
-cy_an_usb_read_data_async(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	cy_bool				pktread,
-	uint32_t			dsize,
-	void *data,
-	cy_an_usb_io_callback		callback
-	);
-#define cy_an_usb_read_data_async(h, ep, pkt, dsize, data_p, cb) \
-	cy_as_usb_read_data_async((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), (pkt), (dsize), (data_p), \
-		(cy_as_usb_io_callback)(cb))
-
-EXTERN cy_an_return_status_t
-cy_an_usb_write_data(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	uint32_t			dsize,
-	void *data
-	);
-#define cy_an_usb_write_data(h, ep, dsize, data_p) \
-	cy_as_usb_write_data((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), (dsize), (data_p))
-
-EXTERN cy_an_return_status_t
-cy_an_usb_write_data_async(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	uint32_t			dsize,
-	void *data,
-	cy_bool				spacket,
-	cy_an_usb_io_callback		callback
-	);
-#define cy_an_usb_write_data_async(h, ep, dsize, data_p, spacket, cb) \
-	cy_as_usb_write_data_async((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), (dsize), (data_p), (spacket), \
-		(cy_as_usb_io_callback)(cb))
-
-EXTERN cy_an_return_status_t
-cy_an_usb_cancel_async(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep
-	);
-#define cy_an_usb_cancel_async(h, ep) \
-	cy_as_usb_cancel_async((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep))
-
-/* Sync version of set stall */
-EXTERN cy_an_return_status_t
-cy_an_usb_set_stall(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	cy_an_usb_function_callback		cb,
-	uint32_t			client
-);
-#define cy_an_usb_set_stall(h, ep, cb, client)	\
-	cy_as_usb_set_stall_dep((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), \
-	(cy_as_usb_function_callback)(cb), (client))
-
-/* Async version of set stall */
-extern cy_an_return_status_t
-cy_an_usb_set_stall_e_x(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	cy_an_function_callback		cb,
-	uint32_t			client
-);
-#define cy_an_usb_set_stall_e_x(h, ep, cb, client)	\
-	cy_as_usb_set_stall((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), \
-	(cy_as_function_callback)(cb), (client))
-
-/*Sync version of clear stall */
-EXTERN cy_an_return_status_t
-cy_an_usb_clear_stall(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	cy_an_usb_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_clear_stall(h, ep, cb, client)	\
-	cy_as_usb_clear_stall_dep((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), \
-	(cy_as_usb_function_callback)(cb), (client))
-
-/*Sync version of clear stall */
-extern cy_an_return_status_t
-cy_an_usb_clear_stall_e_x(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_clear_stall_e_x(h, ep, cb, client) \
-	cy_as_usb_clear_stall((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync get stall */
-EXTERN cy_an_return_status_t
-cy_an_usb_get_stall(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	cy_bool *stall_p
-	);
-#define cy_an_usb_get_stall(handle, ep, stall_p) \
-	cy_as_usb_get_stall((cy_as_device_handle)(handle), \
-	(cy_as_end_point_number_t)(ep), (stall_p), 0, 0)
-
-/* Async get stall */
-extern cy_an_return_status_t
-cy_an_usb_get_stall_e_x(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	cy_bool *stall_p,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_get_stall_e_x(h, ep, stall_p, cb, client)	\
-	cy_as_usb_get_stall((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), (stall_p), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync version of Set Nak */
-EXTERN cy_an_return_status_t
-cy_an_usb_set_nak(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	cy_an_usb_function_callback		cb,
-	uint32_t			client
-);
-
-#define cy_an_usb_set_nak(h, ep, cb, client) \
-	cy_as_usb_set_nak_dep((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), \
-	(cy_as_usb_function_callback)(cb), (client))
-
-/* Async version of Set Nak */
-extern cy_an_return_status_t
-cy_an_usb_set_nak_e_x(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	cy_an_function_callback		cb,
-	uint32_t			client
-);
-#define cy_an_usb_set_nak_e_x(h, ep, cb, client) \
-	cy_as_usb_set_nak((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync version of clear nak */
-EXTERN cy_an_return_status_t
-cy_an_usb_clear_nak(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	cy_an_usb_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_clear_nak(h, ep, cb, client) \
-	cy_as_usb_clear_nak_dep((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), \
-	(cy_as_usb_function_callback)(cb), (client))
-
-/* Sync version of clear nak */
-extern cy_an_return_status_t
-cy_an_usb_clear_nak_e_x(
-	cy_an_device_handle		handle,
-	cy_an_end_point_number_t		ep,
-	cy_an_function_callback		cb,
-	uint32_t			client
-	);
-#define cy_an_usb_clear_nak_e_x(h, ep, cb, client) \
-	cy_as_usb_clear_nak((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync Get NAK */
-EXTERN cy_an_return_status_t
-cy_an_usb_get_nak(
-	cy_an_device_handle			handle,
-	cy_an_end_point_number_t		ep,
-	cy_bool *nak_p
-);
-#define cy_an_usb_get_nak(handle, ep, nak_p) \
-	cy_as_usb_get_nak((cy_as_device_handle)(handle), \
-	(cy_as_end_point_number_t)(ep), (nak_p), 0, 0)
-
-/* Async Get NAK */
-EXTERN cy_an_return_status_t
-cy_an_usb_get_nak_e_x(
-	cy_an_device_handle			handle,
-	cy_an_end_point_number_t		ep,
-	cy_bool *nak_p,
-	cy_an_function_callback		cb,
-	uint32_t				client
-);
-#define cy_an_usb_get_nak_e_x(h, ep, nak_p, cb, client)	\
-	cy_as_usb_get_nak((cy_as_device_handle)(h), \
-	(cy_as_end_point_number_t)(ep), (nak_p), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Sync remote wakup */
-EXTERN cy_an_return_status_t
-cy_an_usb_signal_remote_wakeup(
-		cy_an_device_handle			handle
-		);
-#define cy_an_usb_signal_remote_wakeup(handle) \
-	cy_as_usb_signal_remote_wakeup((cy_as_device_handle)(handle), 0, 0)
-
-/* Async remote wakup */
-EXTERN cy_an_return_status_t
-cy_an_usb_signal_remote_wakeup_e_x(
-		cy_an_device_handle			handle,
-		cy_an_function_callback		cb,
-		uint32_t					client
-		);
-#define cy_an_usb_signal_remote_wakeup_e_x(h, cb, client)	\
-	cy_as_usb_signal_remote_wakeup((cy_as_device_handle)(h), \
-	(cy_as_function_callback)(cb), (client))
-
-/* Only version of SetMSReportThreshold */
-EXTERN cy_an_return_status_t
-cy_an_usb_set_m_s_report_threshold(
-		cy_an_device_handle			handle,
-		uint32_t					wr_sectors,
-		uint32_t					rd_sectors,
-		cy_an_function_callback		cb,
-		uint32_t					client
-		);
-#define cy_an_usb_set_m_s_report_threshold\
-	(h, wr_cnt, rd_cnt, cb, client) \
-	cy_as_usb_set_m_s_report_threshold((cy_as_device_handle)(h), \
-	wr_cnt, rd_cnt, (cy_as_function_callback)(cb), (client))
-
-/* Select storage partitions to be enumerated. */
-EXTERN cy_an_return_status_t
-cy_an_usb_select_m_s_partitions(
-		cy_an_device_handle				handle,
-		cy_an_media_type				   media,
-		uint32_t						device,
-		cy_an_usb_m_s_type_t				 type,
-		cy_an_function_callback			cb,
-		uint32_t						client
-		);
-#define cy_an_usb_select_m_s_partitions(h, media, dev, type, cb, client) \
-	cy_as_usb_select_m_s_partitions_dep((cy_as_device_handle)(h), \
-	(cy_as_media_type)(media), (dev),		\
-	(cy_as_usb_m_s_type_t)(type), (cy_as_function_callback)(cb), (client))
-
-#include "cyas_cplus_end.h"
-#endif /*__doxygen__*/
-#endif	/*_INCLUDED_CYANUSB_H_*/
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyas_cplus_end.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyas_cplus_end.h
deleted file mode 100644
index ece44ca34f3b..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyas_cplus_end.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * This file is included at the end of other include files.
- * It basically turns off the C++ specific code words that
- * insure this code is seen as C code even within
- * a C++ compiler.
- *
- */
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyas_cplus_start.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyas_cplus_start.h
deleted file mode 100644
index b879cefa9d6b..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyas_cplus_start.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * This file is included after all other headers files, but before any other
- * definitions in the file.  It basically insures that the definitions within
- * the file are seen as C defintions even when compiled by a C++ compiler.
- */
-
-#ifdef __cplusplus
-
-extern "C" {
-
-#endif
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyascast.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyascast.h
deleted file mode 100644
index 5f8c852fbb41..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyascast.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Cypress West Bridge API header file (cyascast.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASCAST_H_
-#define _INCLUDED_CYASCAST_H_
-
-#ifndef __doxygen__
-
-#ifdef _DEBUG
-#define cy_cast_int2U_int16(v) \
-	(cy_as_hal_assert(v < 65536), (uint16_t)(v))
-#else		   /* _DEBUG */
-#define cy_cast_int2U_int16(v) ((uint16_t)(v))
-#endif		  /* _DEBUG */
-
-#endif	  /* __doxygen__ */
-#endif		  /* _INCLUDED_CYASCAST_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdevice.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdevice.h
deleted file mode 100644
index 6452a9070091..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdevice.h
+++ /dev/null
@@ -1,1057 +0,0 @@
-/* Cypress West Bridge API header file (cyasdevice.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-##Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef __INCLUDED_CYASDEVICE_H__
-#define __INCLUDED_CYASDEVICE_H__
-
-#include "cyashal.h"
-#include "cyasprotocol.h"
-#include "cyasusb.h"
-#include "cyasstorage.h"
-#include "cyasmtp.h"
-#include "cyas_cplus_start.h"
-
-/***********************************
- * West Bridge Constants
- ***********************************/
-
-/* The endpoints used by West Bridge for the P port to S port path */
-#define CY_AS_P2S_WRITE_ENDPOINT (0x04)
-#define CY_AS_P2S_READ_ENDPOINT (0x08)
-
-/* The endpoint to use for firmware download */
-#define CY_AS_FIRMWARE_ENDPOINT	(0x02)
-
-/* The maximum size of the firmware image West Bridge can accept */
-#define CY_AS_MAXIMUM_FIRMWARE_SIZE	(24 * 1024)
-
-/* The maximum size of a write for EP0 and EP1 */
-#define CY_AS_EP0_MAX_WRITE_SIZE (128)
-#define CY_AS_EP1_MAX_WRITE_SIZE (64)
-
-/* The bitfields for the device state value */
-
-/* The device is in StandBy mode */
-#define CY_AS_DEVICE_STATE_PIN_STANDBY (0x00000001)
-/* The device has been configured */
-#define CY_AS_DEVICE_STATE_CONFIGURED (0x00000002)
-/* The firmware has been loaded into the device */
-#define CY_AS_DEVICE_STATE_FIRMWARE_LOADED (0x00000004)
-/* The interrupt module has been initialized */
-#define CY_AS_DEVICE_STATE_LOWLEVEL_MODULE (0x00000008)
-/* The DMA module has been initialized */
-#define CY_AS_DEVICE_STATE_DMA_MODULE (0x00000010)
-/* The interrupt module has been initialized */
-#define CY_AS_DEVICE_STATE_INTR_MODULE (0x00000020)
-/* The storage module has been initialized */
-#define CY_AS_DEVICE_STATE_STORAGE_MODULE (0x00000040)
-/* The USB module has been initialized */
-#define CY_AS_DEVICE_STATE_USB_MODULE (0x00000080)
-/* If set, the API wants SCSI messages */
-#define CY_AS_DEVICE_STATE_STORAGE_SCSIMSG (0x00000100)
-/* If set, an ASYNC storage operation is pending */
-#define CY_AS_DEVICE_STATE_STORAGE_ASYNC_PENDING (0x00000200)
-/* If set, the USB port is connected */
-#define CY_AS_DEVICE_STATE_USB_CONNECTED (0x00000400)
-/* If set and USB is connected, it is high speed */
-#define CY_AS_DEVICE_STATE_USB_HIGHSPEED (0x00000800)
-/* If set, we are in a callback */
-#define CY_AS_DEVICE_STATE_IN_CALLBACK (0x00001000)
-/* If set, we are processing a setup packet */
-#define CY_AS_DEVICE_STATE_IN_SETUP_PACKET (0x00004000)
-/* The device was placed in standby via register */
-#define CY_AS_DEVICE_STATE_REGISTER_STANDBY (0x00008000)
-/* If set, the device is using a crystal */
-#define CY_AS_DEVICE_STATE_CRYSTAL (0x00010000)
-/* If set, wakeup has been called */
-#define CY_AS_DEVICE_STATE_WAKING (0x00020000)
-/* If set, EP0 has been stalled. */
-#define CY_AS_DEVICE_STATE_EP0_STALLED (0x00040000)
-/* If set, device is in suspend mode. */
-#define CY_AS_DEVICE_STATE_SUSPEND (0x00080000)
-/* If set, device is a reset is pending. */
-#define CY_AS_DEVICE_STATE_RESETP (0x00100000)
-/* If set, device is a standby is pending. */
-#define CY_AS_DEVICE_STATE_STANDP (0x00200000)
-/* If set, device has a storage start or stop pending. */
-#define CY_AS_DEVICE_STATE_SSSP	(0x00400000)
-/* If set, device has a usb start or stop pending. */
-#define CY_AS_DEVICE_STATE_USSP	(0x00800000)
-/* If set, device has a mtp start or stop pending. */
-#define CY_AS_DEVICE_STATE_MSSP	(0x01000000)
-/* If set, P2S DMA transfer can be started. */
-#define CY_AS_DEVICE_STATE_P2SDMA_START (0x02000000)
-
-/* The bitfields for the endpoint state value */
-/* DMA requests are accepted into the queue */
-#define CY_AS_DMA_ENDPOINT_STATE_ENABLED (0x0001)
-/* The endpoint has a sleeping client, waiting on a queue drain */
-#define CY_AS_DMA_ENDPOINT_STATE_SLEEPING (0x0002)
-/* The DMA backend to hardware is running */
-#define CY_AS_DMA_ENDPOINT_STATE_DMA_RUNNING (0x0004)
-/* There is an outstanding DMA entry deployed to the HAL */
-#define CY_AS_DMA_ENDPOINT_STATE_IN_TRANSIT (0x0008)
-/* 0 = OUT (West Bridge -> P Port), 1 = IN (P Port -> West Bridge) */
-#define CY_AS_DMA_ENDPOINT_STATE_DIRECTION (0x0010)
-
-/* The state values for the request list */
-/* Mask for getting the state information */
-#define CY_AS_REQUEST_LIST_STATE_MASK (0x0f)
-/* The request is queued, nothing further */
-#define CY_AS_REQUEST_LIST_STATE_QUEUED (0x00)
-/* The request is sent, waiting for response */
-#define CY_AS_REQUEST_LIST_STATE_WAITING (0x01)
-/* The response has been received, processing response */
-#define CY_AS_REQUEST_LIST_STATE_RECEIVED (0x02)
-/* The request/response is being canceled */
-#define CY_AS_REQUEST_LIST_STATE_CANCELING (0x03)
-/* The request is synchronous */
-#define CY_AS_REQUEST_LIST_STATE_SYNC (0x80)
-
-/* The flag values for a LL RequestResponse */
-/* This request requires an ACK to be sent after it is completed */
-#define CY_AS_REQUEST_RESPONSE_DELAY_ACK (0x01)
-/* This request originated from a version V1.1 function call */
-#define CY_AS_REQUEST_RESPONSE_EX (0x02)
-/* This request originated from a version V1.2 function call */
-#define CY_AS_REQUEST_RESPONSE_MS (0x04)
-
-
-#define CY_AS_DEVICE_HANDLE_SIGNATURE (0x01211219)
-
-/*
- * This macro returns the endpoint pointer given the
- * device pointer and an endpoint number
- */
-#define CY_AS_NUM_EP(dev_p, num) ((dev_p)->endp[(num)])
-
-/****************************************
- * West Bridge Data Structures
- ****************************************/
-
-typedef struct cy_as_device cy_as_device;
-
-/* Summary
-   This type defines a callback function that will be called
-   on completion of a DMA operation.
-
-   Description
-   This function definition is for a function that is called when
-   the DMA operation is complete. This function is called with the
-   endpoint number, operation type, buffer pointer and size.
-
-   See Also
-   * CyAsDmaOper
-   * CyAsDmaQueueWrite
- */
-typedef void (*cy_as_dma_callback)(
-	/* The device that completed DMA */
-	cy_as_device *dev_p,
-	/* The endpoint that completed DMA */
-	cy_as_end_point_number_t ep,
-	/* The pointer to the buffer that completed DMA */
-	void *mem_p,
-	/* The amount of data transferred */
-	uint32_t size,
-	/* The error code for this DMA xfer */
-	cy_as_return_status_t error
-	);
-
-/* Summary
-   This structure defines a DMA request that is queued
-
-   Description
-   This structure contains the information about a DMA
-   request that is queued and is to be sent when possible.
-*/
-typedef struct cy_as_dma_queue_entry {
-	/* Pointer to memory buffer for this request */
-	void *buf_p;
-	/* Size of the memory buffer for DMA operation */
-	uint32_t size;
-	/* Offset into memory buffer for next DMA operation */
-	uint32_t offset;
-	/* If TRUE and IN request */
-	cy_bool packet;
-	/* If TRUE, this is a read request */
-	cy_bool	readreq;
-	/* Callback function for when DMA is complete */
-	cy_as_dma_callback	cb;
-	/* Pointer to next entry in queue */
-	struct cy_as_dma_queue_entry *next_p;
-} cy_as_dma_queue_entry;
-
-/* Summary
-   This structure defines the endpoint data for a given
-
-   Description
-   This structure defines all of the information required
-   to manage DMA for a given endpoint.
-*/
-typedef struct cy_as_dma_end_point {
-	/* The endpoint number */
-	cy_as_end_point_number_t ep;
-	/* The state of this endpoint */
-	uint8_t	state;
-	/* The maximum amount of data accepted in a packet by the hw */
-	uint16_t maxhwdata;
-	/* The maximum amount of data accepted by the HAL layer */
-	uint32_t maxhaldata;
-	/* The queue for DMA operations */
-	cy_as_dma_queue_entry *queue_p;
-	/* The last entry in the DMA queue */
-	cy_as_dma_queue_entry *last_p;
-	/* This sleep channel is used to wait while the DMA queue
-	 * drains for a given endpoint */
-	cy_as_hal_sleep_channel			 channel;
-} cy_as_dma_end_point;
-
-#define cy_as_end_point_number_is_usb(n) \
-	((n) != 2 && (n) != 4 && (n) != 6 && (n) != 8)
-#define cy_as_end_point_number_is_storage(n) \
-	((n) == 2 || (n) == 4 || (n) == 6 || (n) == 8)
-
-#define cy_as_dma_end_point_is_enabled(ep) \
-	((ep)->state & CY_AS_DMA_ENDPOINT_STATE_ENABLED)
-#define cy_as_dma_end_point_enable(ep) \
-	((ep)->state |= CY_AS_DMA_ENDPOINT_STATE_ENABLED)
-#define cy_as_dma_end_point_disable(ep) \
-	((ep)->state &= ~CY_AS_DMA_ENDPOINT_STATE_ENABLED)
-
-#define cy_as_dma_end_point_is_sleeping(ep) \
-	((ep)->state & CY_AS_DMA_ENDPOINT_STATE_SLEEPING)
-#define cy_as_dma_end_point_set_sleep_state(ep) \
-	((ep)->state |= CY_AS_DMA_ENDPOINT_STATE_SLEEPING)
-#define cy_as_dma_end_point_set_wake_state(ep) \
-	((ep)->state &= ~CY_AS_DMA_ENDPOINT_STATE_SLEEPING)
-
-#define cy_as_dma_end_point_is_running(ep) \
-	((ep)->state & CY_AS_DMA_ENDPOINT_STATE_DMA_RUNNING)
-#define cy_as_dma_end_point_set_running(ep) \
-	((ep)->state |= CY_AS_DMA_ENDPOINT_STATE_DMA_RUNNING)
-#define cy_as_dma_end_point_set_stopped(ep) \
-	((ep)->state &= ~CY_AS_DMA_ENDPOINT_STATE_DMA_RUNNING)
-
-#define cy_as_dma_end_point_in_transit(ep) \
-	((ep)->state & CY_AS_DMA_ENDPOINT_STATE_IN_TRANSIT)
-#define cy_as_dma_end_point_set_in_transit(ep) \
-	((ep)->state |= CY_AS_DMA_ENDPOINT_STATE_IN_TRANSIT)
-#define cy_as_dma_end_point_clear_in_transit(ep) \
-	((ep)->state &= ~CY_AS_DMA_ENDPOINT_STATE_IN_TRANSIT)
-
-#define cy_as_dma_end_point_is_direction_in(ep) \
-	(((ep)->state & CY_AS_DMA_ENDPOINT_STATE_DIRECTION) == \
-		CY_AS_DMA_ENDPOINT_STATE_DIRECTION)
-#define cy_as_dma_end_point_is_direction_out(ep) \
-	(((ep)->state & CY_AS_DMA_ENDPOINT_STATE_DIRECTION) == 0)
-#define cy_as_dma_end_point_set_direction_in(ep) \
-	((ep)->state |= CY_AS_DMA_ENDPOINT_STATE_DIRECTION)
-#define cy_as_dma_end_point_set_direction_out(ep) \
-	((ep)->state &= ~CY_AS_DMA_ENDPOINT_STATE_DIRECTION)
-
-#define cy_as_dma_end_point_is_usb(p) \
-	cy_as_end_point_number_is_usb((p)->ep)
-#define cy_as_dma_end_point_is_storage(p) \
-	cy_as_end_point_number_is_storage((p)->ep)
-
-typedef struct cy_as_ll_request_response {
-	/* The mbox[0] contents - see low level comm section of API doc */
-	uint16_t	box0;
-	/* The amount of data stored in this request/response in bytes */
-	uint16_t	stored;
-	/* Length of this request in words */
-	uint16_t	length;
-	/* Additional status information about the request */
-	uint16_t	flags;
-	/* Note: This is over indexed and contains the request/response data */
-	uint16_t	data[1];
-} cy_as_ll_request_response;
-
-/*
- * The callback function for responses
- */
-typedef void (*cy_as_response_callback)(
-	/* The device that had the response */
-	cy_as_device *dev_p,
-	/* The context receiving a response */
-	uint8_t						 context,
-	/* The request data */
-	cy_as_ll_request_response *rqt,
-	/* The response data */
-	cy_as_ll_request_response *resp,
-	/* The status of the request */
-	cy_as_return_status_t status
-	);
-
-typedef struct cy_as_ll_request_list_node {
-	/* The request to send */
-	cy_as_ll_request_response *rqt;
-	/* The associated response for the request */
-	cy_as_ll_request_response *resp;
-	/* Length of the response */
-	uint16_t						length;
-	/* The callback to call when done */
-	cy_as_response_callback			callback;
-	/* The state of the request */
-	uint8_t						 state;
-	/* The next request in the list */
-	struct cy_as_ll_request_list_node *next;
-} cy_as_ll_request_list_node;
-
-#define cy_as_request_get_node_state(node_p) \
-	((node_p)->state & CY_AS_REQUEST_LIST_STATE_MASK)
-#define cy_as_request_set_node_state(node_p, st) \
-	((node_p)->state = \
-	((node_p)->state & ~CY_AS_REQUEST_LIST_STATE_MASK) | (st))
-
-#define cy_as_request_node_is_sync(node_p) \
-	((node_p)->state & CY_AS_REQUEST_LIST_STATE_SYNC)
-#define cy_as_request_node_set_sync(node_p) \
-	((node_p)->state |= CY_AS_REQUEST_LIST_STATE_SYNC)
-#define cy_as_request_node_clear_sync(node_p) \
-	((node_p)->state &= ~CY_AS_REQUEST_LIST_STATE_SYNC)
-
-#ifndef __doxygen__
-typedef enum cy_as_c_b_node_type {
-	CYAS_INVALID,
-	CYAS_USB_FUNC_CB,
-	CYAS_USB_IO_CB,
-	CYAS_STORAGE_IO_CB,
-	CYAS_FUNC_CB
-} cy_as_c_b_node_type;
-
-typedef struct cy_as_func_c_b_node {
-	cy_as_c_b_node_type			  node_type;
-	cy_as_function_callback		cb_p;
-	uint32_t					client_data;
-	cy_as_funct_c_b_type			 data_type;
-	void	*data;
-	struct cy_as_func_c_b_node *next_p;
-} cy_as_func_c_b_node;
-
-extern cy_as_func_c_b_node*
-cy_as_create_func_c_b_node_data(cy_as_function_callback
-	cb, uint32_t client, cy_as_funct_c_b_type type, void *data);
-
-extern cy_as_func_c_b_node*
-cy_as_create_func_c_b_node(cy_as_function_callback cb,
-	uint32_t client);
-
-extern void
-cy_as_destroy_func_c_b_node(cy_as_func_c_b_node *node);
-
-typedef struct cy_as_mtp_func_c_b_node {
-	cy_as_c_b_node_type			  type;
-	cy_as_mtp_function_callback	 cb_p;
-	uint32_t					client_data;
-	struct cy_as_mtp_func_c_b_node *next_p;
-} cy_as_mtp_func_c_b_node;
-
-extern cy_as_mtp_func_c_b_node*
-cy_as_create_mtp_func_c_b_node(cy_as_mtp_function_callback cb,
-	uint32_t client);
-
-extern void
-cy_as_destroy_mtp_func_c_b_node(cy_as_mtp_func_c_b_node *node);
-
-typedef struct cy_as_usb_func_c_b_node {
-	cy_as_c_b_node_type	type;
-	cy_as_usb_function_callback	 cb_p;
-	uint32_t client_data;
-	struct cy_as_usb_func_c_b_node *next_p;
-} cy_as_usb_func_c_b_node;
-
-extern cy_as_usb_func_c_b_node*
-cy_as_create_usb_func_c_b_node(cy_as_usb_function_callback cb,
-	uint32_t client);
-
-extern void
-cy_as_destroy_usb_func_c_b_node(cy_as_usb_func_c_b_node *node);
-
-typedef struct cy_as_usb_io_c_b_node {
-	cy_as_c_b_node_type			  type;
-	cy_as_usb_io_callback		   cb_p;
-	struct cy_as_usb_io_c_b_node *next_p;
-} cy_as_usb_io_c_b_node;
-
-extern cy_as_usb_io_c_b_node*
-cy_as_create_usb_io_c_b_node(cy_as_usb_io_callback cb);
-
-extern void
-cy_as_destroy_usb_io_c_b_node(cy_as_usb_io_c_b_node *node);
-
-typedef struct cy_as_storage_io_c_b_node {
-	cy_as_c_b_node_type			  type;
-	cy_as_storage_callback		 cb_p;
-	/* The media for the currently outstanding async storage request */
-	cy_as_media_type			   media;
-	/* The device index for the currently outstanding async storage
-	 * request */
-	uint32_t					device_index;
-	/* The unit index for the currently outstanding async storage
-	 * request */
-	uint32_t					unit;
-	/* The block address for the currently outstanding async storage
-	 * request */
-	uint32_t					block_addr;
-	/* The operation for the currently outstanding async storage
-	 * request */
-	cy_as_oper_type				oper;
-	cy_as_ll_request_response *req_p;
-	cy_as_ll_request_response *reply_p;
-	struct cy_as_storage_io_c_b_node *next_p;
-} cy_as_storage_io_c_b_node;
-
-extern cy_as_storage_io_c_b_node*
-cy_as_create_storage_io_c_b_node(cy_as_storage_callback cb,
-	cy_as_media_type media, uint32_t device_index,
-	uint32_t unit, uint32_t block_addr, cy_as_oper_type oper,
-	cy_as_ll_request_response *req_p,
-	cy_as_ll_request_response *reply_p);
-
-extern void
-cy_as_destroy_storage_io_c_b_node(cy_as_storage_io_c_b_node *node);
-
-typedef struct cy_as_c_b_queue {
-	void *head_p;
-	void *tail_p;
-	uint32_t count;
-	cy_as_c_b_node_type type;
-} cy_as_c_b_queue;
-
-extern cy_as_c_b_queue *
-cy_as_create_c_b_queue(cy_as_c_b_node_type type);
-
-extern void
-cy_as_destroy_c_b_queue(cy_as_c_b_queue *queue);
-
-/* Allocates a new CyAsCBNode */
-extern void
-cy_as_insert_c_b_node(cy_as_c_b_queue *queue_p, void *cbnode);
-
-/* Removes the first CyAsCBNode from the queue and frees it */
-extern void
-cy_as_remove_c_b_node(cy_as_c_b_queue *queue_p);
-
-/* Remove the last CyAsCBNode from the queue and frees it */
-extern void
-cy_as_remove_c_b_tail_node(cy_as_c_b_queue *queue_p);
-
-/* Removes and frees all pending callbacks */
-extern void
-cy_as_clear_c_b_queue(cy_as_c_b_queue *queue_p);
-
-extern cy_as_return_status_t
-cy_as_misc_send_request(cy_as_device *dev_p,
-					  cy_as_function_callback cb,
-					  uint32_t client,
-					  cy_as_funct_c_b_type type,
-					  void *data,
-					  cy_as_c_b_queue *queue,
-					  uint16_t req_type,
-					  cy_as_ll_request_response *req_p,
-					  cy_as_ll_request_response *reply_p,
-					  cy_as_response_callback rcb);
-
-extern void
-cy_as_misc_cancel_ex_requests(cy_as_device *dev_p);
-
-/* Summary
-   Free all memory allocated by and zero all
-   structures initialized by CyAsUsbStart.
- */
-extern void
-cy_as_usb_cleanup(
-		cy_as_device *dev_p);
-
-/* Summary
-   Free all memory allocated and zero all structures initialized
-   by CyAsStorageStart.
- */
-extern void
-cy_as_storage_cleanup(
-		cy_as_device *dev_p);
-#endif
-
-/* Summary
-   This structure defines the data structure to support a
-   given command context
-
-   Description
-   All commands send to the West Bridge device via the mailbox
-   registers are sent via a context.Each context is independent
-   and there can be a parallel stream of requests and responses on
-   each context.  This structure is used to manage a single context.
-*/
-typedef struct cy_as_context {
-	/* The context number for this context */
-	uint8_t						 number;
-	/* This sleep channel is used to sleep while waiting on a
-	 * response from the west bridge device for a request. */
-	cy_as_hal_sleep_channel			 channel;
-	/* The buffer for received requests */
-	cy_as_ll_request_response *req_p;
-	/* The length of the request being received */
-	uint16_t request_length;
-	/* The callback for the next request received */
-	cy_as_response_callback	request_callback;
-	/* A list of low level requests to go to the firmware */
-	cy_as_ll_request_list_node *request_queue_p;
-	/* The list node in the request queue */
-	cy_as_ll_request_list_node *last_node_p;
-	/* Index up to which data is stored. */
-	uint16_t queue_index;
-	/* Index to the next request in the queue. */
-	uint16_t rqt_index;
-	/* Queue of data stored */
-	uint16_t data_queue[128];
-
-} cy_as_context;
-
-#define cy_as_context_is_waiting(ctxt) \
-	((ctxt)->state & CY_AS_CTXT_STATE_WAITING_RESPONSE)
-#define cy_as_context_set_waiting(ctxt) \
-	((ctxt)->state |= CY_AS_CTXT_STATE_WAITING_RESPONSE)
-#define cy_as_context_clear_waiting(ctxt) \
-	((ctxt)->state &= ~CY_AS_CTXT_STATE_WAITING_RESPONSE)
-
-
-
-/* Summary
-   This data structure stores SDIO function
-   parameters for a SDIO card
-
-   Description
-*/
-typedef struct cy_as_sdio_device {
-	/* Keeps track of IO functions initialized*/
-	uint8_t	 function_init_map;
-	uint8_t	 function_suspended_map;
-	/* Function 0 (Card Common) properties*/
-	cy_as_sdio_card card;
-	/* Function 1-7 (Mapped to array element 0-6) properties.*/
-	cy_as_sdio_func function[7];
-
-} cy_as_sdio_device;
-
-/* Summary
-Macros to access the SDIO card properties
-*/
-
-#define cy_as_sdio_get_function_code(handle, bus, i) \
-	(((cy_as_device *)handle)->sdiocard[bus].function[i-1].function_code)
-
-#define cy_as_sdio_get_function_ext_code(handle, bus, i)	\
-	(((cy_as_device *)handle)->sdiocard[bus].\
-		function[i-1].extended_func_code)
-
-#define cy_as_sdio_get_function_p_s_n(handle, bus, i) \
-	(((cy_as_device *)handle)->sdiocard[bus].function[i-1].card_psn)
-
-#define cy_as_sdio_get_function_blocksize(handle, bus, i)  \
-	(((cy_as_device *)handle)->sdiocard[bus].function[i-1].blocksize)
-
-#define cy_as_sdio_get_function_max_blocksize(handle, bus, i) \
-	(((cy_as_device *)handle)->sdiocard[bus].function[i-1].maxblocksize)
-
-#define cy_as_sdio_get_function_csa_support(handle, bus, i) \
-	(((cy_as_device *)handle)->sdiocard[bus].function[i-1].csa_bits)
-
-#define cy_as_sdio_get_function_wakeup_support(handle, bus, i) \
-	(((cy_as_device *)handle)->sdiocard[bus].function[i-1]. wakeup_support)
-
-#define cy_as_sdio_set_function_block_size(handle, bus, i, blocksize) \
-	(((cy_as_device *)handle)->sdiocard[bus].function[i-1].blocksize = \
-	blocksize)
-
-#define cy_as_sdio_get_card_num_functions(handle, bus) \
-	(((cy_as_device *)handle)->sdiocard[bus].card.num_functions)
-
-#define cy_as_sdio_get_card_mem_present(handle, bus) \
-	(((cy_as_device *)handle)->sdiocard[bus].card.memory_present)
-
-#define cy_as_sdio_get_card_manf_id(handle, bus)	\
-	(((cy_as_device *)handle)->sdiocard[bus].card.manufacturer__id)
-
-#define cy_as_sdio_get_card_manf_info(handle, bus) \
-	(((cy_as_device *)handle)->sdiocard[bus].card.manufacturer_info)
-
-#define cy_as_sdio_get_card_blocksize(handle, bus) \
-	(((cy_as_device *)handle)->sdiocard[bus].card.blocksize)
-
-#define cy_as_sdio_get_card_max_blocksize(handle, bus) \
-	(((cy_as_device *)handle)->sdiocard[bus].card.maxblocksize)
-
-#define cy_as_sdio_get_card_sdio_version(handle, bus) \
-	(((cy_as_device *)handle)->sdiocard[bus].card.sdio_version)
-
-#define cy_as_sdio_get_card_capability(handle, bus) \
-	(((cy_as_device *)handle)->sdiocard[bus].card.card_capability)
-
-#define cy_as_sdio_get_function_init_map(handle, bus) \
-	(((cy_as_device *)handle)->sdiocard[bus].function_init_map)
-
-#define cy_as_sdio_check_function_initialized(handle, bus, i) \
-	(((cy_as_sdio_get_function_init_map(handle, bus)) & (0x01<<i)) ? 1 : 0)
-
-#define cy_as_sdio_set_card_block_size(handle, bus, blocksize) \
-	(((cy_as_device *)handle)->sdiocard[bus].card.blocksize = blocksize)
-
-#define cy_as_sdio_check_support_bus_suspend(handle, bus) \
-	((cy_as_sdio_get_card_capability(handle, bus) & CY_SDIO_SBS) ? 1 : 0)
-
-#define cy_as_sdio_check_function_suspended(handle, bus, i) \
-	((((cy_as_device *)handle)->sdiocard[bus].function_suspended_map & \
-		(0x01<<i)) ? 1 : 0)
-
-#define cy_as_sdio_set_function_suspended(handle, bus, i) \
-	((((cy_as_device *)handle)->sdiocard[bus].function_suspended_map) \
-	|= (0x01<<i))
-
-#define cy_as_sdio_clear_function_suspended(handle, bus, i) \
-	((((cy_as_device *)handle)->sdiocard[bus].function_suspended_map) \
-	&= (~(0x01<<i)))
-
-/* Summary
-   This data structure represents a single device.
-
-   Description
-*/
-struct cy_as_device {
-	/* General stuff */
-	/* A signature to insure we have a valid handle */
-	uint32_t sig;
-	/* The ID of the silicon */
-	uint16_t silicon_id;
-	/* Pointer to the next device */
-	struct cy_as_device *next_p;
-	/* This is the client specific tag for this device */
-	cy_as_hal_device_tag tag;
-	/* This contains various state information about the device */
-	uint32_t state;
-	/* Flag indicating whether INT# pin is used for DRQ */
-	cy_bool	use_int_drq;
-
-	/* DMA related */
-	/* The endpoint pointers associated with this device */
-	cy_as_dma_end_point	 *endp[16];
-	/* List of queue entries that can be used for xfers */
-	cy_as_dma_queue_entry *dma_freelist_p;
-
-	/* Low level comm related */
-	/* The contexts available in this device */
-	cy_as_context *context[CY_RQT_CONTEXT_COUNT];
-	/* The low level error returned from sending an async request */
-	cy_as_return_status_t ll_error;
-	/* A request is currently being sent to West Bridge. */
-	cy_bool	ll_sending_rqt;
-	/* The current mailbox request should be aborted. */
-	cy_bool	ll_abort_curr_rqt;
-	/* Indicates that the LL layer has queued mailbox data. */
-	cy_bool	ll_queued_data;
-
-	/* MISC API related */
-	/* Misc callback */
-	cy_as_misc_event_callback misc_event_cb;
-
-	/* Storage Related */
-	/* The reference count for the Storage API */
-	uint32_t storage_count;
-	/* Callback for storage events */
-	cy_as_storage_event_callback_dep	storage_event_cb;
-	/* V1.2+ callback for storage events */
-	cy_as_storage_event_callback  storage_event_cb_ms;
-	/* The error for a sleeping storage operation */
-	cy_as_return_status_t		  storage_error;
-	/* Flag indicating that the storage stack is waiting for an operation */
-	cy_bool					  storage_wait;
-	/* Request used for storage read/writes. */
-	cy_as_ll_request_response *storage_rw_req_p;
-	/* Response used for storage read/writes. */
-	cy_as_ll_request_response *storage_rw_resp_p;
-	/* The storage callback */
-	cy_as_storage_callback_dep storage_cb;
-	/* The V1.2+ storage callback */
-	cy_as_storage_callback storage_cb_ms;
-	/* The bus index for the currently outstanding async storage request */
-	cy_as_bus_number_t storage_bus_index;
-	/* The device index for the currently outstanding async storage
-	 * request */
-	uint32_t storage_device_index;
-	/* The unit index for the currently outstanding async storage request */
-	uint32_t storage_unit;
-	/* The block address for the currently outstanding async storage
-	 * request */
-	uint32_t storage_block_addr;
-	/* The operation for the currently outstanding async storage request */
-	cy_as_oper_type	storage_oper;
-	/* The endpoint used to read Storage data */
-	cy_as_end_point_number_t storage_read_endpoint;
-	/* The endpoint used to write endpoint data */
-	cy_as_end_point_number_t storage_write_endpoint;
-	cy_as_device_desc storage_device_info
-		[CY_AS_MAX_BUSES][CY_AS_MAX_STORAGE_DEVICES];
-	/* The information on each device on each bus */
-
-	/* USB Related */
-	/* This conatins the endpoint async state */
-	uint16_t epasync;
-	/* The reference count for the USB API */
-	uint32_t usb_count;
-	/* The physical endpoint configuration */
-	uint8_t	usb_phy_config;
-	/* The callbacks for async func calls */
-	cy_as_c_b_queue *usb_func_cbs;
-	/* Endpoint configuration information */
-	cy_as_usb_end_point_config usb_config[16];
-	/* The USB callback */
-	cy_as_usb_event_callback_dep usb_event_cb;
-	/* The V1.2+ USB callback */
-	cy_as_usb_event_callback usb_event_cb_ms;
-	/* The error for a sleeping usb operation */
-	cy_as_return_status_t usb_error;
-	/* The USB callback for a pending storage operation */
-	cy_as_usb_io_callback usb_cb[16];
-	/* The buffer pending from a USB operation */
-	void *usb_pending_buffer;
-	/* The size of the buffer pending from a USB operation */
-	uint32_t usb_pending_size;
-	/* If true, send a short packet */
-	cy_bool	usb_spacket[16];
-	/* The amount of data actually xferred */
-	uint32_t usb_actual_cnt;
-	/* EP1OUT and EP1IN config register contents */
-	uint8_t	usb_ep1cfg[2];
-	/* LEP config register contents */
-	uint16_t usb_lepcfg[10];
-	/* PEP config register contents */
-	uint16_t usb_pepcfg[4];
-	/* Buffer for EP0 and EP1 data sent via mailboxes */
-	uint8_t *usb_ep_data;
-	/* Used to track how many ack requests are pending */
-	uint32_t usb_delay_ack_count;
-	/* Maximum transfer size for USB endpoints. */
-	uint32_t usb_max_tx_size;
-
-	/* Request for sending EP0 data to West Bridge */
-	cy_as_ll_request_response *usb_ep0_dma_req;
-	/* Response for EP0 data sent to West Bridge */
-	cy_as_ll_request_response *usb_ep0_dma_resp;
-	/* Request for sending EP1 data to West Bridge */
-	cy_as_ll_request_response *usb_ep1_dma_req;
-	/* Response for EP1 data sent to West Bridge */
-	cy_as_ll_request_response *usb_ep1_dma_resp;
-
-	cy_as_ll_request_response *usb_ep0_dma_req_save;
-	cy_as_ll_request_response *usb_ep0_dma_resp_save;
-
-	/* MTP Related */
-	/* The reference count for the MTP API */
-	uint32_t mtp_count;
-	/* The MTP event callback supplied by the client */
-	cy_as_mtp_event_callback mtp_event_cb;
-	/* The current block table to be transferred */
-	cy_as_mtp_block_table *tp_blk_tbl;
-
-	cy_as_c_b_queue *func_cbs_mtp;
-	cy_as_c_b_queue *func_cbs_usb;
-	cy_as_c_b_queue *func_cbs_stor;
-	cy_as_c_b_queue *func_cbs_misc;
-	cy_as_c_b_queue *func_cbs_res;
-
-	/* The last USB event that was received */
-	cy_as_usb_event	usb_last_event;
-	/* Types of storage media supported by the firmware */
-	uint8_t	media_supported[CY_AS_MAX_BUSES];
-
-	/* SDIO card parameters*/
-	cy_as_sdio_device   sdiocard[CY_AS_MAX_BUSES];
-	/* if true, MTP enabled Firmware. */
-	cy_bool	is_mtp_firmware;
-	/* if true, mailbox message has come already */
-	cy_bool	is_mtp_data_pending;
-	/* True between the time an Init was called and
-	 * the complete event is generated */
-	cy_bool	mtp_turbo_active;
-	/* mbox reported EP 2 data len */
-	uint16_t mtp_data_len;
-	/* The error for mtp EP4 write operation */
-	cy_as_return_status_t mtp_error;
-	/* mtp send/get operation callback */
-	cy_as_function_callback	mtp_cb;
-	/* mtp send/get operation client id */
-	uint32_t mtp_client;
-	/* mtp operation type. To be used in callback */
-	cy_as_funct_c_b_type mtp_op;
-
-	/* Firmware is running in P2S only mode. */
-	cy_bool	is_storage_only_mode;
-	/* Interrupt mask value during device standby. */
-	uint32_t stby_int_mask;
-};
-
-#define cy_as_device_is_configured(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_CONFIGURED)
-#define cy_as_device_set_configured(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_CONFIGURED)
-#define cy_as_device_set_unconfigured(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_CONFIGURED)
-
-#define cy_as_device_is_dma_running(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_DMA_MODULE)
-#define cy_as_device_set_dma_running(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_DMA_MODULE)
-#define cy_as_device_set_dma_stopped(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_DMA_MODULE)
-
-#define cy_as_device_is_low_level_running(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_LOWLEVEL_MODULE)
-#define cy_as_device_set_low_level_running(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_LOWLEVEL_MODULE)
-#define cy_as_device_set_low_level_stopped(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_LOWLEVEL_MODULE)
-
-#define cy_as_device_is_intr_running(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_INTR_MODULE)
-#define cy_as_device_set_intr_running(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_INTR_MODULE)
-#define cy_as_device_set_intr_stopped(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_INTR_MODULE)
-
-#define cy_as_device_is_firmware_loaded(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_FIRMWARE_LOADED)
-#define cy_as_device_set_firmware_loaded(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_FIRMWARE_LOADED)
-#define cy_as_device_set_firmware_not_loaded(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_FIRMWARE_LOADED)
-
-#define cy_as_device_is_storage_running(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_STORAGE_MODULE)
-#define cy_as_device_set_storage_running(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_STORAGE_MODULE)
-#define cy_as_device_set_storage_stopped(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_STORAGE_MODULE)
-
-#define cy_as_device_is_usb_running(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_USB_MODULE)
-#define cy_as_device_set_usb_running(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_USB_MODULE)
-#define cy_as_device_set_usb_stopped(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_USB_MODULE)
-
-#define cy_as_device_wants_scsi_messages(dp) \
-	(((dp)->state & CY_AS_DEVICE_STATE_STORAGE_SCSIMSG) \
-	? cy_true : cy_false)
-#define cy_as_device_set_scsi_messages(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_STORAGE_SCSIMSG)
-#define cy_as_device_clear_scsi_messages(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_STORAGE_SCSIMSG)
-
-#define cy_as_device_is_storage_async_pending(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_STORAGE_ASYNC_PENDING)
-#define cy_as_device_set_storage_async_pending(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_STORAGE_ASYNC_PENDING)
-#define cy_as_device_clear_storage_async_pending(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_STORAGE_ASYNC_PENDING)
-
-#define cy_as_device_is_usb_connected(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_USB_CONNECTED)
-#define cy_as_device_set_usb_connected(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_USB_CONNECTED)
-#define cy_as_device_clear_usb_connected(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_USB_CONNECTED)
-
-#define cy_as_device_is_usb_high_speed(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_USB_HIGHSPEED)
-#define cy_as_device_set_usb_high_speed(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_USB_HIGHSPEED)
-#define cy_as_device_clear_usb_high_speed(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_USB_HIGHSPEED)
-
-#define cy_as_device_is_in_callback(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_IN_CALLBACK)
-#define cy_as_device_set_in_callback(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_IN_CALLBACK)
-#define cy_as_device_clear_in_callback(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_IN_CALLBACK)
-
-#define cy_as_device_is_setup_i_o_performed(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_SETUP_IO_PERFORMED)
-#define cy_as_device_set_setup_i_o_performed(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_SETUP_IO_PERFORMED)
-#define cy_as_device_clear_setup_i_o_performed(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_SETUP_IO_PERFORMED)
-
-#define cy_as_device_is_ack_delayed(dp) \
-	((dp)->usb_delay_ack_count > 0)
-#define cy_as_device_set_ack_delayed(dp) \
-	((dp)->usb_delay_ack_count++)
-#define cy_as_device_rem_ack_delayed(dp) \
-	((dp)->usb_delay_ack_count--)
-#define cy_as_device_clear_ack_delayed(dp) \
-	((dp)->usb_delay_ack_count = 0)
-
-#define cy_as_device_is_setup_packet(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_IN_SETUP_PACKET)
-#define cy_as_device_set_setup_packet(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_IN_SETUP_PACKET)
-#define cy_as_device_clear_setup_packet(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_IN_SETUP_PACKET)
-
-#define cy_as_device_is_ep0_stalled(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_EP0_STALLED)
-#define cy_as_device_set_ep0_stalled(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_EP0_STALLED)
-#define cy_as_device_clear_ep0_stalled(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_EP0_STALLED)
-
-#define cy_as_device_is_register_standby(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_REGISTER_STANDBY)
-#define cy_as_device_set_register_standby(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_REGISTER_STANDBY)
-#define cy_as_device_clear_register_standby(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_REGISTER_STANDBY)
-
-#define cy_as_device_is_pin_standby(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_PIN_STANDBY)
-#define cy_as_device_set_pin_standby(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_PIN_STANDBY)
-#define cy_as_device_clear_pin_standby(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_PIN_STANDBY)
-
-#define cy_as_device_is_crystal(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_CRYSTAL)
-#define cy_as_device_is_external_clock(dp) \
-	(!((dp)->state & CY_AS_DEVICE_STATE_CRYSTAL))
-#define cy_as_device_set_crystal(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_CRYSTAL)
-#define cy_as_device_set_external_clock(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_CRYSTAL)
-
-#define cy_as_device_is_waking(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_WAKING)
-#define cy_as_device_set_waking(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_WAKING)
-#define cy_as_device_clear_waking(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_WAKING)
-
-#define cy_as_device_is_in_suspend_mode(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_SUSPEND)
-#define cy_as_device_set_suspend_mode(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_SUSPEND)
-#define cy_as_device_clear_suspend_mode(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_SUSPEND)
-
-#define cy_as_device_is_reset_pending(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_RESETP)
-#define cy_as_device_set_reset_pending(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_RESETP)
-#define cy_as_device_clear_reset_pending(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_RESETP)
-
-#define cy_as_device_is_standby_pending(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_STANDP)
-#define cy_as_device_set_standby_pending(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_STANDP)
-#define cy_as_device_clear_standby_pending(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_STANDP)
-
-#define cy_as_device_is_s_s_s_pending(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_SSSP)
-#define cy_as_device_set_s_s_s_pending(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_SSSP)
-#define cy_as_device_clear_s_s_s_pending(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_SSSP)
-
-#define cy_as_device_is_u_s_s_pending(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_USSP)
-#define cy_as_device_set_u_s_s_pending(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_USSP)
-#define cy_as_device_clear_u_s_s_pending(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_USSP)
-
-#define cy_as_device_is_m_s_s_pending(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_MSSP)
-#define cy_as_device_set_m_s_s_pending(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_MSSP)
-#define cy_as_device_clear_m_s_s_pending(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_MSSP)
-
-#define cy_as_device_is_p2s_dma_start_recvd(dp) \
-	((dp)->state & CY_AS_DEVICE_STATE_P2SDMA_START)
-#define cy_as_device_set_p2s_dma_start_recvd(dp) \
-	((dp)->state |= CY_AS_DEVICE_STATE_P2SDMA_START)
-#define cy_as_device_clear_p2s_dma_start_recvd(dp) \
-	((dp)->state &= ~CY_AS_DEVICE_STATE_P2SDMA_START)
-
-#define cy_as_device_is_usb_async_pending(dp, ep) \
-	((dp)->epasync & (1 << ep))
-#define cy_as_device_set_usb_async_pending(dp, ep) \
-	((dp)->epasync |= (1 << ep))
-#define cy_as_device_clear_usb_async_pending(dp, ep) \
-	((dp)->epasync &= ~(1 << ep))
-
-#define cy_as_device_is_nand_storage_supported(dp) \
-	((dp)->media_supported[0] & 1)
-
-/* Macros to check the type of West Bridge device. */
-#define cy_as_device_is_astoria_dev(dp) \
-	(((dp)->silicon_id == CY_AS_MEM_CM_WB_CFG_ID_HDID_ASTORIA_VALUE) || \
-	 ((dp)->silicon_id == CY_AS_MEM_CM_WB_CFG_ID_HDID_ASTORIA_FPGA_VALUE))
-#define cy_as_device_is_antioch_dev(dp) \
-	((dp)->silicon_id == CY_AS_MEM_CM_WB_CFG_ID_HDID_ANTIOCH_VALUE)
-
-#ifdef CY_AS_LOG_SUPPORT
-extern void cy_as_log_debug_message(int value, const char *msg);
-#else
-#define cy_as_log_debug_message(value, msg)
-#endif
-
-/* Summary
-   This function finds the device object given the HAL tag
-
-   Description
-   The user associats a device TAG with each West Bridge device
-   created.  This tag is passed from the  API functions to and HAL
-   functions that need to ID a specific West Bridge device.  This
-   tag is also passed in from the user back into the API via
-   interrupt functions.  This function allows the API to find the
-   device structure associated with a given tag.
-
-   Notes
-   This function does a simple linear search for the device based
-   on the TAG.  This function is called each time an West Bridge
-   interrupt handler is called.  Therefore this works fine for a
-   small number of West Bridge devices (e.g. less than five).
-   Anything more than this and this methodology will need to be
-   updated.
-
-   Returns
-   Pointer to a CyAsDevice associated with the tag
-*/
-extern cy_as_device *
-cy_as_device_find_from_tag(
-		cy_as_hal_device_tag tag
-		);
-
-#include "cyas_cplus_end.h"
-
-#endif		  /* __INCLUDED_CYASDEVICE_H__ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdma.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdma.h
deleted file mode 100644
index 16dc9f96018c..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdma.h
+++ /dev/null
@@ -1,375 +0,0 @@
-/* Cypress West Bridge API header file (cyasdma.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASDMA_H_
-#define _INCLUDED_CYASDMA_H_
-
-#include "cyashal.h"
-#include "cyasdevice.h"
-
-#include "cyas_cplus_start.h"
-
-
-/*@@DMA Overview
-	This module manages the DMA operations to/from the West Bridge
-	device.  The DMA module maintains a DMA queue for each endpoint
-	so multiple DMA requests may be queued and they will complete
-	at some future time.
-
-	The DMA module must be started before it can be used.  It is
-	started by calling CyAsDmaStart().  This function initializes
-	all of the endpoint data structures.
-
-	In order to perform DMA on a particular endpoint, the endpoint
-	must be enabled by calling CyAsDmaEnableEndPoint(). In addition
-	to enabling or disabling the endpoint, this function also sets
-	the direction for a given endpoint.  Direction is given in USB
-	terms.  For P port to West Bridge traffic, the endpoint is a
-	CyAsDirectionIn endpoint.  For West Bridge to P port traffic,
-	the endpoint is a CyAsDirectionOut endpoint.
-
-	Once DMA is started and an endpoint is enabled, DMA requests
-	are issued by calling CyAsDmaQueueRequest().  This function
-	queue either a DMA read or DMA write request.  The callback
-	associated with the request is called once the request has been
-	fulfilled.
-
-	See Also
-	* CyAsDmaStart
-	* CyAsDmaEnableEndPoint
-	* CyAsDmaDirection
-	* CyAsDmaQueueRequest
- */
-
-/************************
- * West Bridge Constants
- ************************/
-#define CY_AS_DMA_MAX_SIZE_HW_SIZE (0xffffffff)
-
-/************************
- * West Bridge Data Structures
- ************************/
-
-/* Summary
-   This type specifies the direction of an endpoint to the
-   CyAsDmaEnableEndPoint function.
-
-   Description
-   When an endpoint is enabled, the direction of the endpoint
-   can also be set. This type is used to specify the endpoint
-   type.  Note that the direction is specified in USB terms.
-   Therefore, if the DMA is from the P port to West Bridge,
-   the direction is IN.
-
-   See Also
-   * CyAsDmaEnableEndPoint
-*/
-typedef enum cy_as_dma_direction {
-	/* Set the endpoint to type IN (P -> West Bridge) */
-	cy_as_direction_in = 0,
-	/* Set the endpoint to type OUT (West Bridge -> P) */
-	cy_as_direction_out = 1,
-	/* Only valid for EP 0 */
-	cy_as_direction_in_out = 2,
-	/* Do no change the endpoint type */
-	cy_as_direction_dont_change = 3
-} cy_as_dma_direction;
-
-/*********************************
- * West Bridge Functions
- *********************************/
-
-/* Summary
-   Initialize the DMA module and ready the module for receiving data
-
-   Description
-   This function initializes the DMA module by initializing all of
-   the endpoint data structures associated with the device given.
-   This function also register a DMA complete callback with the HAL
-   DMA code.  This callback is called whenever the HAL DMA subsystem
-   completes a requested DMA operation.
-
-   Returns
-   CY_AS_ERROR_SUCCESS - the module initialized successfully
-   CY_AS_ERROR_OUT_OF_MEMORY - memory allocation failed during
-		initialization
-   CY_AS_ERROR_ALREADY_RUNNING - the DMA module was already running
-
-   See Also
-   * CyAsDmaStop
-*/
-extern cy_as_return_status_t
-cy_as_dma_start(
-	/* The device to start */
-	cy_as_device *dev_p
-	);
-
-/* Summary
-   Shutdown the DMA module
-
-   Description
-   This function shuts down the DMA module for this device by
-   canceling any DMA requests associated with each endpoint and
-   then freeing the resources associated with each DMA endpoint.
-
-   Returns
-   CY_AS_ERROR_SUCCESS - the module shutdown successfully
-   CY_AS_ERROR_NOT_RUNNING - the DMA module was not running
-
-   See Also
-   * CyAsDmaStart
-   * CyAsDmaCancel
-*/
-extern cy_as_return_status_t
-cy_as_dma_stop(
-	/* The device to stop */
-	cy_as_device *dev_p
-	);
-
-/* Summary
-   This function cancels all outstanding DMA requests on a given endpoint
-
-   Description
-   This function cancels any DMA requests outstanding on a given endpoint
-   by disabling the transfer of DMA requests from the queue to the HAL
-   layer and then removing any pending DMA requests from the queue. The
-   callback associated with any DMA requests that are being removed is
-   called with an error code of CY_AS_ERROR_CANCELED.
-
-   Notes
-   If a request has already been sent to the HAL layer it will be
-   completed and not canceled. Only requests that have not been sent to
-   the HAL layer will be cancelled.
-
-   Returns
-   CY_AS_ERROR_SUCCESS - the traffic on the endpoint is canceled
-	successfully
-
-   See Also
-*/
-extern cy_as_return_status_t
-cy_as_dma_cancel(
-	/* The device of interest */
-	cy_as_device *dev_p,
-	/* The endpoint to cancel */
-	cy_as_end_point_number_t ep,
-	cy_as_return_status_t err
-	);
-
-/* Summary
-   This function enables a single endpoint for DMA operations
-
-   Description
-   In order to enable the queuing of DMA requests on a given
-   endpoint, the endpoint must be enabled for DMA.  This function
-   enables a given endpoint.  In addition, this function sets the
-   direction of the DMA operation.
-
-   Returns
-   * CY_AS_ERROR_INVALID_ENDPOINT - invalid endpoint number
-   * CY_AS_ERROR_SUCCESS - endpoint was enabled or disabled
-   *	successfully
-
-   See Also
-   * CyAsDmaQueueRequest
-*/
-extern cy_as_return_status_t
-cy_as_dma_enable_end_point(
-	/* The device of interest */
-	cy_as_device *dev_p,
-	/* The endpoint to enable or disable */
-	cy_as_end_point_number_t ep,
-	/* CyTrue to enable, CyFalse to disable */
-	cy_bool	enable,
-	/* The direction of the endpoint */
-	cy_as_dma_direction	dir
-);
-
-/* Summary
-   This function queue a DMA request for a given endpoint
-
-   Description
-   When an West Bridge API module wishes to do a DMA operation,
-   this function is called on the associated endpoint to queue
-   a DMA request.  When the DMA request has been fulfilled, the
-   callback associated with the DMA operation is called.
-
-   Notes
-   The buffer associated with the DMA request, must remain valid
-   until after the callback function is calld.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the DMA operation was queued successfully
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint number was invalid
-   * CY_AS_ERROR_ENDPOINT_DISABLED - the endpoint was disabled
-   * CY_AS_ERROR_OUT_OF_MEMORY - out of memory processing the request
-
-   See Also
-   * CyAsDmaEnableEndPoint
-   * CyAsDmaCancel
-*/
-extern cy_as_return_status_t
-cy_as_dma_queue_request(
-	/* The device of interest */
-	cy_as_device *dev_p,
-	/* The endpoint to receive a new request */
-	cy_as_end_point_number_t ep,
-	/* The memory buffer for the DMA request -
-	 * must be valid until after the callback has been called */
-	void *mem_p,
-	/* The size of the DMA request in bytes */
-	uint32_t size,
-	/* If true and a DMA read request, return the next packet
-	 * regardless of size */
-	cy_bool	packet,
-	/* If true, this is a read request,
-	 * otherwise it is a write request */
-	cy_bool	readreq,
-	/* The callback to call when the DMA request is complete,
-	 * either successfully or via an error */
-	cy_as_dma_callback cb
-	);
-
-/* Summary
-   This function waits until all DMA requests on a given endpoint
-   have been processed and then return
-
-   Description
-   There are times when a module in the West Bridge API needs to
-   wait until the DMA operations have been queued.  This function
-   sleeps until all DMA requests have been fulfilled and only then
-   returns to the caller.
-
-   Notes
-   I don't think we will need a list of sleeping clients to support
-   multiple parallel client modules sleeping on a single endpoint,
-   but if we do instead of having a single sleep channel in the
-   endpoint, each client will have to supply a sleep channel and we
-   will have to maintain a list of sleep channels to wake.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the queue has drained successfully
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint given is not valid
-   * CY_AS_ERROR_NESTED_SLEEP - CyAsDmaQueueRequest() was requested
-   *	on an endpoint where CyAsDmaQueueRequest was already called
-*/
-extern cy_as_return_status_t
-cy_as_dma_drain_queue(
-	/* The device of interest */
-	cy_as_device *dev_p,
-	/* The endpoint to drain */
-	cy_as_end_point_number_t ep,
-	/* If CyTrue, call kickstart to start the DMA process,
-	if cy_false, west bridge will start the DMA process */
-	cy_bool kickstart
-	);
-
-/* Summary
-   Sets the maximum amount of data West Bridge can accept in a single
-   DMA Operation for the given endpoint
-
-   Description
-   Depending on the configuration of the West Bridge device endpoint,
-   the amount of data that can be accepted varies.  This function
-   sets the maximum amount of data West Bridge can accept in a single
-   DMA operation.  The value is stored with the endpoint and passed
-   to the HAL layer in the CyAsHalDmaSetupWrite() and
-   CyAsHalDmaSetupRead() functoins.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the value was set successfully
-   * CY_AS_ERROR_INVALID_SIZE - the size value was not valid
-*/
-extern cy_as_return_status_t
-cy_as_dma_set_max_dma_size(
-	/* The device of interest */
-	cy_as_device *dev_p,
-	/* The endpoint to change */
-	cy_as_end_point_number_t ep,
-	/* The max size of this endpoint in bytes */
-	uint32_t size
-	);
-
-/* Summary
-   This function starts the DMA process on a given channel.
-
-   Description
-   When transferring data from the P port processor to West
-   Bridge, the DMA operation must be initiated P Port software
-   for the first transfer.  Subsequent transferrs will be
-   handled at the interrupt level.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS
-*/
-extern cy_as_return_status_t
-cy_as_dma_kick_start(
-	/* The device of interest */
-	cy_as_device *dev_p,
-	/* The endpoint to change */
-	cy_as_end_point_number_t ep
-	);
-
-/* Summary
-   This function receives endpoint data from a request.
-
-   Description
-   For endpoint 0 and 1 the endpoint data is transferred from
-   the West Bridge device to the DMA via a lowlevel
-   requests (via the mailbox registers).
-
-   Returns
-   * CY_AS_ERROR_SUCCESS
-*/
-extern cy_as_return_status_t
-cy_as_dma_received_data(
-	/* The device of interest */
-	cy_as_device *dev_p,
-	/* The endpoint that received data */
-	cy_as_end_point_number_t ep,
-	/* The data size */
-	uint32_t dsize,
-	/* The data buffer */
-	void *data
-	);
-
-/* Summary
-   This function is called when the DMA operation on
-   an endpoint has been completed.
-
-   Returns
-   * void
- */
-extern void
-cy_as_dma_completed_callback(
-	/* Tag to HAL completing the DMA operation. */
-	cy_as_hal_device_tag	 tag,
-	/* Endpoint on which DMA has been completed. */
-	cy_as_end_point_number_t ep,
-	/* Length of data received. */
-	uint32_t			 length,
-	/* Status of DMA operation. */
-	cy_as_return_status_t   status
-	);
-
-#include "cyas_cplus_end.h"
-
-#endif		  /* _INCLUDED_CYASDMA_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaserr.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaserr.h
deleted file mode 100644
index 2cd0af1ed781..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaserr.h
+++ /dev/null
@@ -1,1094 +0,0 @@
-/* Cypress West Bridge API header file (cyaserr.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASERR_H_
-#define _INCLUDED_CYASERR_H_
-
-/*@@West Bridge Errors
-  Summary
-  This section lists the error codes for West Bridge.
-
-*/
-
-/* Summary
-   The function completed successfully
-*/
-#define CY_AS_ERROR_SUCCESS	 (0)
-
-/* Summary
-   A function trying to acquire a resource was unable to do so.
-
-   Description
-   This code indicates that a resource that the API was trying to claim
-   could not be claimed.
-
-   See Also
-   * CyAsMiscAcquireResource
-   * CyAsStorageClaim
-*/
-#define CY_AS_ERROR_NOT_ACQUIRED  (1)
-
-/* Summary
-   A function trying to acquire a resource was unable to do so.
-
-   Description
-   The West Bridge API provides the capability to assign the storage media to
-   either the West Bridge device or the USB port.  This error indicates the
-   P port was trying to release a storage media and was not able to do
-   so.  This generally means it was not owned by the P port processor.
-
-   See Also
-   * CyAsStorageRelease
-*/
-#define CY_AS_ERROR_NOT_RELEASED  (2)
-
-/* Summary
-   The West Bridge firmware is not loaded.
-
-   Description
-   Most of the API functions that are part of the West Bridge API rely on
-   firmware running on the West Bridge device.  This error code is
-   returned when one of these functions is called and the firmware has
-   not yet been loaded.
-
-   See Also
-   * CyAsMiscGetFirmwareVersion
-   * CyAsMiscReset
-   * CyAsMiscAcquireResource
-   * CyAsMiscReleaseResource
-   * CyAsMiscSetTraceLevel
-   * CyAsStorageStart
-   * CyAsStorageStop
-   * CyAsStorageRegisterCallback
-   * CyAsStorageClaim
-   * CyAsStorageRelease
-   * CyAsStorageQueryMedia
-   * CyAsStorageQueryDevice
-   * CyAsStorageQueryUnit
-   * CyAsStorageRead
-   * CyAsStorageWrite
-   * CyAsStorageReadAsync
-   * CyAsStorageWriteAsync
-*/
-#define CY_AS_ERROR_NO_FIRMWARE (3)
-
-/* Summary
-   A timeout occurred waiting on a response from the West Bridge device
-
-   Description
-   When requests are made of the West Bridge device, a response is expected
-   within a given timeframe.  If a response is not recevied within the
-   given timeframe, a timeout error occurs.
-*/
-#define CY_AS_ERROR_TIMEOUT	 (4)
-
-/* Summary
-   A request to download firmware was made while not in the CONFIG mode
-
-   Description
-   Firmware is downloaded via the CyAsMiscDownloadFirmware() function.  This
-   function can only be called while in the CONFIG mode.  This error indicates
-   that the CyAsMiscDownloadFirmware() call was made while not in the CONFIG
-   mode.
-
-   See Also
-   * CyAsMiscDownloadFirmware
-*/
-#define CY_AS_ERROR_NOT_IN_CONFIG_MODE	 (5)
-
-/* Summary
-   This error is returned if the firmware size specified is too invalid.
-
-   Description
-   If the size of the firmware to be downloaded into West Bridge is
-   invalid, this error is issued.  Invalid firmware sizes are those
-   greater than 24K or a size of zero.
-
-   See Also
-   * CyAsMiscDownloadFirmare
-*/
-#define CY_AS_ERROR_INVALID_SIZE  (6)
-
-/* Summary
-   This error is returned if a request is made to acquire a resource that has
-   already been acquired.
-
-   Description
-   This error is returned if a request is made to acquire a resource that has
-   already been acquired.
-
-   See Also
-   * CyAsMiscAcquireResource
-   * CyAsMiscReleaseResource
-*/
-#define CY_AS_ERROR_RESOURCE_ALREADY_OWNED (7)
-
-/* Summary
-   This error is returned if a request is made to release a resource that has
-   not previously been acquired.
-
-   Description
-   This error is returned if a request is made to release a resource that has
-   not previously been acquired.
-
-   See Also
-   * CyAsMiscAcquireResource
-   * CyAsMiscReleaseResource
-*/
-#define CY_AS_ERROR_RESOURCE_NOT_OWNED	 (8)
-
-/* Summary
-   This error is returned when a request is made for a media that
-   does not exist
-
-   Description
-   This error is returned when a request is made that references
-   a storage media that does not exist.  This error is returned
-   when the storage media is not present in the current system,
-   or if the media value given is not valid.
-
-   See Also
-   * CyAsMiscSetTraceLevel
-   * CyAsStorageClaim
-   * CyAsStorageRelease
-   * CyAsStorageRead
-   * CyAsStorageWrite
-   * CyAsStorageReadAsync
-   * CyAsStorageWriteAsync
-*/
-#define CY_AS_ERROR_NO_SUCH_MEDIA		  (9)
-
-/* Summary
-   This error is returned when a request is made for a device
-   that does not exist
-
-   Description
-   This error is returned when a request is made that references a
-   storage device that does not exist.  This error is returned when
-   the device index is not present in the current system, or if the
-   device index exceeds 15.
-
-   See Also
-   * CyAsMiscSetTraceLevel
-   * CyAsStorageQueryDevice
-   * CyAsStorageRead
-   * CyAsStorageWrite
-   * CyAsStorageReadAsync
-   * CyAsStorageWriteAsync
-*/
-#define CY_AS_ERROR_NO_SUCH_DEVICE		 (10)
-
-/* Summary
-   This error is returned when a request is made for a unit that
-   does not exist
-
-   Description
-   This error is returned when a request is made that references
-   a storage unit that does not exist.  This error is returned
-   when the unit index is not present in the current system, or
-   if the unit index exceeds 255.
-
-   See Also
-   * CyAsMiscSetTraceLevel
-   * CyAsStorageQueryDevice
-   * CyAsStorageQueryUnit
-   * CyAsStorageRead
-   * CyAsStorageWrite
-   * CyAsStorageReadAsync
-   * CyAsStorageWriteAsync
-*/
-#define CY_AS_ERROR_NO_SUCH_UNIT  (11)
-
-/* Summary
-   This error is returned when a request is made for a block that
-   does not exist
-
-   Description
-   This error is returned when a request is made that references
-   a storage block that does not exist.  This error is returned
-   when the block address reference an address beyond the end of
-   the unit selected.
-
-   See Also
-   * CyAsStorageRead
-   * CyAsStorageWrite
-   * CyAsStorageReadAsync
-   * CyAsStorageWriteAsync
-*/
-#define CY_AS_ERROR_INVALID_BLOCK		  (12)
-
-/* Summary
-   This error is returned when an invalid trace level is set.
-
-   Description
-   This error is returned when the trace level request is greater
-   than three.
-
-   See Also
-   * CyAsMiscSetTraceLevel
-*/
-#define CY_AS_ERROR_INVALID_TRACE_LEVEL	 (13)
-
-/* Summary
-   This error is returned when West Bridge is already in the standby state
-   and an attempt is made to put West Bridge into this state again.
-
-   Description
-   This error is returned when West Bridge is already in the standby state
-   and an attempt is made to put West Bridge into this state again.
-
-   See Also
-   * CyAsMiscEnterStandby
-*/
-#define CY_AS_ERROR_ALREADY_STANDBY	 (14)
-
-/* Summary
-   This error is returned when the API needs to set a pin on the
-   West Bridge device, but this is not supported by the underlying HAL
-   layer.
-
-   Description
-   This error is returned when the API needs to set a pin on the
-   West Bridge device, but this is not supported by the underlying HAL
-   layer.
-
-   See Also
-   * CyAsMiscEnterStandby
-   * CyAsMiscLeaveStandby
-*/
-#define CY_AS_ERROR_SETTING_WAKEUP_PIN	(15)
-
-/* Summary
-   This error is returned when a module is being started that has
-   already been started.
-
-   Description
-   This error is returned when a module is being started and that module
-   has already been started.  This error does not occur with the
-   CyAsStorageStart() or CyAsUsbStart() functions as the storage and
-   USB modules are reference counted.
-
-   Note
-   At the current time, this error is returned by module internal to
-   the API but not returned by any of the API functions.
-*/
-#define CY_AS_ERROR_ALREADY_RUNNING	(16)
-
-/* Summary
-   This error is returned when a module is being stopped that has
-   already been stopped.
-
-   Description
-   This error is returned when a module is being stopped and that module
-   has already been stopped.  This error does not occur with the
-   CyAsStorageStop() or CyAsUsbStop() functions as the storage and USB
-   modules are reference counted.
-
-   Note
-   At the current time, this error is returned by module internal to
-   the API but not returned by any of the API functions.
-*/
-
-#define CY_AS_ERROR_NOT_RUNNING (17)
-
-/* Summary
-   This error is returned when the caller tries to claim a media that
-   has already been claimed.
-
-   Description
-   This error is returned when the caller tries to claim a media that
-   has already been claimed.
-
-   See Also
-   * CyAsStorageClaim
-*/
-#define CY_AS_ERROR_MEDIA_ALREADY_CLAIMED  (18)
-
-/* Summary
-   This error is returned when the caller tries to release a media that has
-   already been released.
-
-   Description
-   This error is returned when the caller tries to release a media that has
-   already been released.
-
-   See Also
-   * CyAsStorageRelease
-*/
-#define CY_AS_ERROR_MEDIA_NOT_CLAIMED	  (19)
-
-/* Summary
-   This error is returned when canceling trying to cancel an asynchronous
-   operation when an async operation is not pending.
-
-   Description
-   This error is returned when a call is made to a function to cancel an
-   asynchronous operation and there is no asynchronous operation pending.
-
-   See Also
-   * CyAsStorageCancelAsync
-   * CyAsUsbCancelAsync
-*/
-#define CY_AS_ERROR_NO_OPERATION_PENDING (20)
-
-/* Summary
-   This error is returned when an invalid endpoint number is provided to
-   an API call.
-
-   Description
-   This error is returned when an invalid endpoint number is specified in
-   an API call.  The endpoint number may be invalid because it is greater
-   than 15, or because it was a reference to an endpoint that is invalid
-   for West Bridge (2, 4, 6, or 8).
-
-   See Also
-   * CyAsUsbSetEndPointConfig
-   * CyAsUsbGetEndPointConfig
-   * CyAsUsbReadData
-   * CyAsUsbWriteData
-   * CyAsUsbReadDataAsync
-   * CyAsUsbWriteDataAsync
-   * CyAsUsbSetStall
-   * CyAsUsbGetStall
-*/
-#define CY_AS_ERROR_INVALID_ENDPOINT (21)
-
-/* Summary
-   This error is returned when an invalid descriptor type
-   is specified in an API call.
-
-   Description
-   This error is returned when an invalid descriptor type
-   is specified in an API call.
-
-   See Also
-   * CyAsUsbSetDescriptor
-   * CyAsUsbGetDescriptor
-*/
-#define CY_AS_ERROR_INVALID_DESCRIPTOR	 (22)
-
-/* Summary
-   This error is returned when an invalid descriptor index
-   is specified in an API call.
-
-   Description
-   This error is returned when an invalid descriptor index
-   is specified in an API call.
-
-   See Also
-   * CyAsUsbSetDescriptor
-   * CyAsUsbGetDescriptor
-*/
-#define CY_AS_ERROR_BAD_INDEX (23)
-
-/* Summary
-   This error is returned if trying to set a USB descriptor
-   when in the P port enumeration mode.
-
-   Description
-   This error is returned if trying to set a USB descriptor
-   when in the P port enumeration mode.
-
-   See Also
-   * CyAsUsbSetDescriptor
-   * CyAsUsbGetDescriptor
-*/
-#define CY_AS_ERROR_BAD_ENUMERATION_MODE (24)
-
-/* Summary
-   This error is returned when the endpoint configuration specified
-   is not valid.
-
-   Description
-   This error is returned when the endpoint configuration specified
-   is not valid.
-
-   See Also
-   * CyAsUsbSetDescriptor
-   * CyAsUsbGetDescriptor
-   * CyAsUsbCommitConfig
-*/
-#define CY_AS_ERROR_INVALID_CONFIGURATION  (25)
-
-/* Summary
-   This error is returned when the API cannot verify it is connected
-   to an West Bridge device.
-
-   Description
-   When the API is initialized, the API tries to read the ID register from
-   the West Bridge device.  The value from this ID register should match the
-   value expected before communications with West Bridge are established.  This
-   error means that the contents of the ID register cannot be verified.
-
-   See Also
-   * CyAsMiscConfigureDevice
-*/
-#define CY_AS_ERROR_NO_ANTIOCH			 (26)
-
-/* Summary
-   This error is returned when an API function is called and
-   CyAsMiscConfigureDevice has not been called to configure West Bridge
-   for the current environment.
-
-   Description
-   This error is returned when an API function is called and
-   CyAsMiscConfigureDevice has not been called to configure West Bridge for
-   the current environment.
-
-   See Also
-   * Almost all API function
-*/
-#define CY_AS_ERROR_NOT_CONFIGURED		 (27)
-
-/* Summary
-   This error is returned when West Bridge cannot allocate memory required for
-   internal API operations.
-
-   Description
-   This error is returned when West Bridge cannot allocate memory required for
-   internal API operations.
-
-   See Also
-   * Almost all API functoins
-*/
-#define CY_AS_ERROR_OUT_OF_MEMORY		  (28)
-
-/* Summary
-   This error is returned when a module is being started that has
-   already been started.
-
-   Description
-   This error is returned when a module is being started and that module
-   has already been started.  This error does not occur with the
-   CyAsStorageStart() or CyAsUsbStart() functions as the storage and
-   USB modules are reference counted.
-
-   Note
-   At the current time, this error is returned by module internal to the API but
-   not returned by any of the API functions.
-*/
-#define CY_AS_ERROR_NESTED_SLEEP  (29)
-
-/* Summary
-   This error is returned when an operation is attempted on an endpoint that has
-   been disabled.
-
-   Description
-   This error is returned when an operation is attempted on an endpoint that has
-   been disabled.
-
-   See Also
-   * CyAsUsbReadData
-   * CyAsUsbWriteData
-   * CyAsUsbReadDataAsync
-   * CyAsUsbWriteDataAsync
-*/
-#define CY_AS_ERROR_ENDPOINT_DISABLED	  (30)
-
-/* Summary
-   This error is returned when a call is made to an API function when
-   the device is in standby.
-
-   Description
-   When the West Bridge device is in standby, the only two API functions that
-   can be called are CyAsMiscInStandby() and CyAsMiscLeaveStandby().
-   Calling any other API function will result in this error.
-
-   See Also
-*/
-#define CY_AS_ERROR_IN_STANDBY			 (31)
-
-/* Summary
-   This error is returned when an API call is made with an invalid handle value.
-
-   Description
-   This error is returned when an API call is made with an invalid handle value.
-
-   See Also
-*/
-#define CY_AS_ERROR_INVALID_HANDLE		 (32)
-
-/* Summary
-   This error is returned when an invalid response is returned from
-   the West Bridge device.
-
-   Description
-   Many of the API calls result in requests made to the West Bridge
-   device.  This error occurs when the response from West Bridge is
-   invalid and generally indicates that the West Bridge device
-   should be reset.
-
-   See Also
-*/
-#define CY_AS_ERROR_INVALID_RESPONSE	(33)
-
-/* Summary
-   This error is returned from the callback function for any asynchronous
-   read or write request that is canceled.
-
-   Description
-   When asynchronous requests are canceled, this error is passed to the
-   callback function associated with the request to indicate that the
-   request has been canceled
-
-   See Also
-   * CyAsStorageReadAsync
-   * CyAsStorageWriteAsync
-   * CyAsUsbReadDataAsync
-   * CyAsUsbWriteDataAsync
-   * CyAsStorageCancelAsync
-   * CyAsUsbCancelAsync
-*/
-#define CY_AS_ERROR_CANCELED	(34)
-
-/* Summary
-   This error is returned when the call to create sleep channel fails
-   in the HAL layer.
-
-   Description
-   This error is returned when the call to create sleep channel fails
-   in the HAL layer.
-
-   See Also
-   * CyAsMiscConfigureDevice
-*/
-#define CY_AS_ERROR_CREATE_SLEEP_CHANNEL_FAILED	 (35)
-
-/* Summary
-   This error is returned when the call to CyAsMiscLeaveStandby
-   is made and the device is not in standby.
-
-   Description
-   This error is returned when the call to CyAsMiscLeaveStandby
-   is made and the device is not in standby.
-
-   See Also
-*/
-#define CY_AS_ERROR_NOT_IN_STANDBY		 (36)
-
-/* Summary
-   This error is returned when the call to destroy sleep channel fails
-   in the HAL layer.
-
-   Description
-   This error is returned when the call to destroy sleep channel fails
-   in the HAL layer.
-
-   See Also
-   * CyAsMiscDestroyDevice
-*/
-#define CY_AS_ERROR_DESTROY_SLEEP_CHANNEL_FAILED (37)
-
-/* Summary
-   This error is returned when an invalid resource is specified to a call
-   to CyAsMiscAcquireResource() or CyAsMiscReleaseResource()
-
-   Description
-   This error is returned when an invalid resource is specified to a call
-   to CyAsMiscAcquireResource() or CyAsMiscReleaseResource()
-
-   See Also
-   * CyAsMiscAcquireResource
-   * CyAsMiscReleaseResource
-*/
-#define CY_AS_ERROR_INVALID_RESOURCE (38)
-
-/* Summary
-   This error occurs when an operation is requested on an endpoint that has
-   a currently pending async operation.
-
-   Description
-   There can only be a single asynchronous pending operation on a given
-   endpoint and while the operation is pending on other operation can occur
-   on the endpoint.  In addition, the device cannot enter standby while
-   any asynchronous operations are pending.
-
-   See Also
-   * CyAsStorageReadAsync
-   * CyAsStorageWriteAsync
-   * CyAsUsbReadDataAsync
-   * CyAsUsbWriteDataAsync
-   * CyAsStorageRead
-   * CyAsStorageWrite
-   * CyAsUsbReadData
-   * CyAsUsbWriteData
-   * CyAsMiscEnterStandby
-*/
-#define CY_AS_ERROR_ASYNC_PENDING (39)
-
-/* Summary
-   This error is returned when a call to CyAsStorageCancelAsync() or
-   CyAsUsbCancelAsync() is made when no asynchronous request is pending.
-
-   Description
-   This error is returned when a call to CyAsStorageCancelAsync() or
-   CyAsUsbCancelAsync() is made when no asynchronous request is pending.
-
-   See Also
-   * CyAsStorageCancelAsync
-   * CyAsUsbCancelAsync
-*/
-#define CY_AS_ERROR_ASYNC_NOT_PENDING	  (40)
-
-/* Summary
-   This error is returned when a request is made to put the West Bridge device
-   into standby mode while the USB stack is still active.
-
-   Description
-   This error is returned when a request is made to put the West Bridge device
-   into standby mode while the USB stack is still active.  You must call the
-   function CyAsUsbStop() in order to shut down the USB stack in order to go
-   into the standby mode.
-
-   See Also
-   * CyAsMiscEnterStandby
-*/
-#define CY_AS_ERROR_USB_RUNNING	 (41)
-
-/* Summary
-   A request for in the wrong direction was issued on an endpoint.
-
-   Description
-   This error is returned when a write is attempted on an OUT endpoint or
-   a read is attempted on an IN endpoint.
-
-   See Also
-   * CyAsUsbReadData
-   * CyAsUsbWriteData
-   * CyAsUsbReadDataAsync
-   * CyAsUsbWriteDataAsync
-*/
-#define CY_AS_ERROR_USB_BAD_DIRECTION	  (42)
-
-/* Summary
-   An invalid request was received
-
-   Description
-   This error is isused if an invalid request is issued.
-*/
-#define CY_AS_ERROR_INVALID_REQUEST	(43)
-
-/* Summary
-   An ACK request was requested while no setup packet was pending.
-
-   Description
-   This error is issued if CyAsUsbAckSetupPacket() is called when no
-   setup packet is pending.
-*/
-#define CY_AS_ERROR_NO_SETUP_PACKET_PENDING	(44)
-
-/* Summary
-   A call was made to a API function that cannot be called from a callback.
-
-   Description
-   Only asynchronous functions can be called from within West Bridge callbacks.
-   This error results when an invalid function is called from a callback.
-*/
-#define CY_AS_ERROR_INVALID_IN_CALLBACK	(45)
-
-/* Summary
-   A call was made to CyAsUsbSetEndPointConfig() before
-   CyAsUsbSetPhysicalConfiguration() was called.
-
-   Description
-   When logical endpoints are configured, you must define the physical
-   endpoint for the logical endpoint being configured.  Therefore
-   CyAsUsbSetPhysicalConfiguration() must be called to define the
-   physical endpoints before calling CyAsUsbSetEndPointConfig().
-*/
-#define CY_AS_ERROR_ENDPOINT_CONFIG_NOT_SET		(46)
-
-/* Summary
-   The physical endpoint referenced is not valid in the current physical
-   configuration
-
-   Description
-   When logical endpoints are configured, you must define the physical
-   endpoint for the logical endpoint being configured.  Given the
-   current physical configuration, the physical endpoint referenced
-   is not valid.
-*/
-#define CY_AS_ERROR_INVALID_PHYSICAL_ENDPOINT	(47)
-
-/* Summary
-   The data supplied to the CyAsMiscDownloadFirmware() call is not
-   aligned on a  WORD (16 bit) boundary.
-
-   Description
-   Many systems have problems with the transfer of data a word at a
-   time when the data is not word aligned.  For this reason, we
-   require that the firmware image be aligned on a word boundary and
-   be an even number of bytes.  This error is returned if these
-   conditions are not met.
-*/
-#define CY_AS_ERROR_ALIGNMENT_ERROR	(48)
-
-/* Summary
-   A call was made to destroy the West Bridge device, but the USB
-   stack or the storage stack was will running.
-
-   Description
-   Before calling CyAsMiscDestroyDevice to destroy an West Bridge
-   device created via a call to CyAsMiscCreateDevice, the USB and
-   STORAGE stacks much be stopped via calls to CyAsUsbStop and
-   CyAsStorageStop.  This error indicates that one of these two
-   stacks have not been stopped.
-*/
-#define CY_AS_ERROR_STILL_RUNNING	(49)
-
-/* Summary
-   A call was made to the API for a function that is not yet supported.
-
-   Description
-   There are calls that are not yet supported that may be called through
-   the API.  This is done to maintain compatibility in the future with
-   the API.  This error is returned if you are asking for a capability
-   that does not yet exist.
-*/
-#define CY_AS_ERROR_NOT_YET_SUPPORTED	(50)
-
-/* Summary
-   A NULL callback was provided where a non-NULL callback was required
-
-   Description
-   When async IO function are called, a callback is required to indicate
-   that the IO has completed.  This callback must be non-NULL.
-*/
-#define CY_AS_ERROR_NULL_CALLBACK (51)
-
-/* Summary
-   This error is returned when a request is made to put the West Bridge device
-   into standby mode while the storage stack is still active.
-
-   Description
-   This error is returned when a request is made to put the West Bridge device
-   into standby mode while the storage stack is still active.  You must call the
-   function CyAsStorageStop() in order to shut down the storage stack in order
-   to go into the standby mode.
-
-   See Also
-   * CyAsMiscEnterStandby
-*/
-#define CY_AS_ERROR_STORAGE_RUNNING	 (52)
-
-/* Summary
-   This error is returned when an operation is attempted that cannot be
-   completed while the USB stack is connected to a USB host.
-
-   Description
-   This error is returned when an operation is attempted that cannot be
-   completed while the USB stack is connected to a USB host.  In order
-   to successfully complete the desired operation, CyAsUsbDisconnect()
-   must be called to disconnect from the host.
-*/
-#define CY_AS_ERROR_USB_CONNECTED (53)
-
-/* Summary
-   This error is returned when a USB disconnect is attempted and the
-   West Bridge device is not connected.
-
-   Description
-   This error is returned when a USB disconnect is attempted and the
-   West Bridge device is not connected.
-*/
-#define CY_AS_ERROR_USB_NOT_CONNECTED	(54)
-
-/* Summary
-   This error is returned when an P2S storage operation attempted
-   and data could not be read or written to the storage media.
-
-   Description
-   This error is returned when an P2S storage operation attempted
-   and data could not be read or written to the storage media. If
-   this error is recevied then a retry can be done.
-*/
-#define CY_AS_ERROR_MEDIA_ACCESS_FAILURE (55)
-
-/* Summary
-   This error is returned when an P2S storage operation attempted
-   and the media is write protected.
-
-   Description
-   This error is returned when an P2S storage operation attempted
-   and the media is write protected.
-*/
-#define CY_AS_ERROR_MEDIA_WRITE_PROTECTED (56)
-
-/* Summary
-   This error is returned when an attempt is made to cancel a request
-   that has already been sent to the West Bridge.
-
-   Description
-   It is not possible to cancel an asynchronous storage read/write
-   operation after the actual data transfer with the West Bridge
-   has started. This error is returned if CyAsStorageCancelAsync
-   is called to cancel such a request.
- */
-#define CY_AS_ERROR_OPERATION_IN_TRANSIT (57)
-
-/* Summary
-   This error is returned when an invalid parameter is passed to
-   one of the APIs.
-
-   Description
-   Some of the West Bridge APIs are applicable to only specific
-   media types, devices etc. This error code is returned when a
-   API is called with an invalid parameter type.
- */
-#define CY_AS_ERROR_INVALID_PARAMETER	  (58)
-
-/* Summary
-   This error is returned if an API is not supported in the current setup.
-
-   Description
-   Some of the West Bridge APIs work only with specific device types
-   or firmware images. This error is returned when such APIs are called
-   when the current device or firmware does not support the invoked API
-   function.
- */
-#define CY_AS_ERROR_NOT_SUPPORTED		  (59)
-
-/* Summary
-   This error is returned when a call is made to one of the Storage or
-   USB APIs while the device is in suspend mode.
-
-   Description
-   This error is returned when a call is made to one of the storage or
-   USB APIs while the device is in suspend mode.
- */
-#define CY_AS_ERROR_IN_SUSPEND			 (60)
-
-/* Summary
-   This error is returned when the call to CyAsMiscLeaveSuspend
-   is made and the device is not in suspend mode.
-
-   Description
-   This error is returned when the call to CyAsMiscLeaveSuspend
-   is made and the device is not in suspend mode.
- */
-#define CY_AS_ERROR_NOT_IN_SUSPEND		 (61)
-
-/* Summary
-   This error is returned when a command that is disabled by USB is called.
-
-   Description
-   The remote wakeup capability should be exercised only if enabled by the
-   USB host. This error is returned when the CyAsUsbSignalRemoteWakeup API
-   is called when the feature has not been enabled by the USB host.
- */
-#define CY_AS_ERROR_FEATURE_NOT_ENABLED	 (62)
-
-/* Summary
-   This error is returned when an Async storage read or write is called before a
-   query device call is issued.
-
-   Description
-   In order for the SDK to properly set up a DMA the block size of a given media
-   needs to be known. This is done by making a call to CyAsStorageQueryDevice.
-   This call only needs to be made once per device. If this call is not issued
-   before an Async read or write is issued this error code is returned.
-   */
-#define CY_AS_ERROR_QUERY_DEVICE_NEEDED	(63)
-
-/* Summary
-   This error is returned when a call is made to USB or STORAGE Start or
-   Stop before a prior Start or Stop has finished.
-
-   Description
-   The USB and STORAGE start and stop functions can only be called if a
-   prior start or stop function call has fully completed. This means when
-   an async EX call is made you must wait until the callback for that call
-   has been completed before calling  start or stop again.
-   */
-#define CY_AS_ERROR_STARTSTOP_PENDING	(64)
-
-/* Summary
-   This error is returned when a request is made for a bus that does not exist
-
-   Description
-   This error is returned when a request is made that references a bus
-   number that does not exist.  This error is returned when the bus number
-   is not present in the current system, or if the bus number given is not
-   valid.
-
-   See Also
-   * CyAsMiscSetTraceLevel
-   * CyAsStorageClaim
-   * CyAsStorageRelease
-   * CyAsStorageRead
-   * CyAsStorageWrite
-   * CyAsStorageReadAsync
-   * CyAsStorageWriteAsync
-*/
-#define CY_AS_ERROR_NO_SUCH_BUS (65)
-
-/* Summary
-   This error is returned when the bus corresponding to a media type cannot
-   be resolved.
-
-   Description
-   In some S-Port configurations, the same media type may be supported on
-   multiple buses.  In this case, it is not possible to resolve the target
-   address based on the media type.  This error indicates that only
-   bus-based addressing is supported in a particular run-time
-   configuration.
-
-   See Also
-   * CyAsMediaType
-   * CyAsBusNumber_t
- */
-#define CY_AS_ERROR_ADDRESS_RESOLUTION_ERROR (66)
-
-/* Summary
-   This error is returned when an invalid command is passed to the
-   CyAsStorageSDIOSync() function.
-
-   Description
-   This error indiactes an unknown Command type was passed to the SDIO
-   command handler function.
- */
-
-#define CY_AS_ERROR_INVALID_COMMAND (67)
-
-
-/* Summary
-   This error is returned when an invalid function /uninitialized
-   function is passed to an SDIO function.
-
-   Description
-   This error indiactes an unknown/uninitialized function number was
-   passed to a SDIO function.
- */
-#define CY_AS_ERROR_INVALID_FUNCTION (68)
-
-/* Summary
-   This error is returned when an invalid block size is passed to
-   CyAsSdioSetBlocksize().
-
-   Description
-   This error is returned when an invalid block size (greater than
-   maximum block size supported) is passed to CyAsSdioSetBlocksize().
- */
-
-#define CY_AS_ERROR_INVALID_BLOCKSIZE	  (69)
-
-/* Summary
-   This error is returned when an tuple requested is not found.
-
-   Description
-   This error is returned when an tuple requested is not found.
- */
-#define CY_AS_ERROR_TUPLE_NOT_FOUND	 (70)
-
-/* Summary
-   This error is returned when an extended IO operation to an SDIO function is
-   Aborted.
-   Description
-   This error is returned when an extended IO operation to an SDIO function is
-   Aborted.  */
-#define CY_AS_ERROR_IO_ABORTED	 (71)
-
-/* Summary
-   This error is returned when an extended IO operation to an SDIO function is
-   Suspended.
-   Description
-   This error is returned when an extended IO operation to an SDIO function is
-   Suspended.	*/
-#define CY_AS_ERROR_IO_SUSPENDED  (72)
-
-/* Summary
-   This error is returned when IO is attempted to a Suspended SDIO function.
-   Description
-   This error is returned when IO is attempted to a Suspended SDIO function. */
-#define CY_AS_ERROR_FUNCTION_SUSPENDED	 (73)
-
-/* Summary
-   This error is returned if an MTP function is called before MTPStart
-   has completed.
-   Description
-   This error is returned if an MTP function is called before MTPStart
-   has completed.
-*/
-#define CY_AS_ERROR_MTP_NOT_STARTED	(74)
-
-/* Summary
-   This error is returned by API functions that are not valid in MTP
-   mode (CyAsStorageClaim for example)
-   Description
-   This error is returned by API functions that are not valid in MTP
-   mode (CyAsStorageClaim for example)
-*/
-#define CY_AS_ERROR_NOT_VALID_IN_MTP (75)
-
-/* Summary
-   This error is returned when an attempt is made to partition a
-   storage device that is already partitioned.
-
-   Description
-   This error is returned when an attempt is made to partition a
-   storage device that is already partitioned.
-*/
-#define CY_AS_ERROR_ALREADY_PARTITIONED	(76)
-
-/* Summary
-   This error is returned when a call is made to
-   CyAsUsbSelectMSPartitions after CyAsUsbSetEnumConfig is called.
-
-   Description
-   This error is returned when a call is made to
-   CyAsUsbSelectMSPartitions after CyAsUsbSetEnumConfig is called.
- */
-#define CY_AS_ERROR_INVALID_CALL_SEQUENCE  (77)
-
-/* Summary
-   This error is returned when a StorageWrite opperation is attempted
-   during an ongoing MTP transfer.
-   Description
-   This error is returned when a StorageWrite opperation is attempted
-   during an ongoing MTP transfer. A MTP transfer is initiated by a
-   call to CyAsMTPInitSendObject or CyAsMTPInitGetObject and is not
-   finished until the CyAsMTPSendObjectComplete or
-   CyAsMTPGetObjectComplete event is generated.
-*/
-#define CY_AS_ERROR_NOT_VALID_DURING_MTP (78)
-
-/* Summary
-   This error is returned when a StorageRead or StorageWrite is
-   attempted while a UsbRead or UsbWrite on a Turbo endpoint (2 or 6) is
-   pending, or visa versa.
-   Description
-   When there is a pending usb read or write on a turbo endpoint (2 or 6)
-   a storage read or write call may not be performed. Similarly when there
-   is a pending storage read or write a usb read or write may not be
-   performed on a turbo endpoint (2 or 6).
-*/
-#define CY_AS_ERROR_STORAGE_EP_TURBO_EP_CONFLICT	 (79)
-
-/* Summary
-   This error is returned when processor requests to reserve greater
-   number of zones than available for proc booting via lna firmware.
-
-   Description
-   Astoria does not allocate any nand zones for the processor in this case.
-*/
-#define CY_AS_ERROR_EXCEEDED_NUM_ZONES_AVAIL		 (80)
-
-#endif						/* _INCLUDED_CYASERR_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashal.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashal.h
deleted file mode 100644
index b695ba1a9110..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashal.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* Cypress West Bridge API header file (cyashal.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASHAL_H_
-#define _INCLUDED_CYASHAL_H_
-
-#if !defined(__doxygen__)
-
-/* The possible HAL layers defined and implemented by Cypress */
-
-#ifdef __CY_ASTORIA_FPGA_HAL__
-#ifdef CY_HAL_DEFINED
-#error only one HAL layer can be defined
-#endif
-
-#define CY_HAL_DEFINED
-
-#include "cyashalfpga.h"
-#endif
-
-/***** SCM User space HAL  ****/
-#ifdef __CY_ASTORIA_SCM_HAL__
-#ifdef CY_HAL_DEFINED
-#error only one HAL layer can be defined
-#endif
-
-#define CY_HAL_DEFINEDŚŚ
-
-#include "cyanhalscm.h"
-#endif
-/***** SCM User space HAL  ****/
-
-/***** SCM Kernel HAL  ****/
-#ifdef __CY_ASTORIA_SCM_KERNEL_HAL__
-#ifdef CY_HAL_DEFINED
-#error only one HAL layer can be defined
-#endif
-
-#define CY_HAL_DEFINEDŚ
-
-#include "cyanhalscm_kernel.h"
-#endif
-/***** SCM Kernel HAL  ****/
-
-/***** OMAP5912 Kernel HAL  ****/
-#ifdef __CY_ASTORIA_OMAP_5912_KERNEL_HAL__
- #ifdef CY_HAL_DEFINED
-  #error only one HAL layer can be defined
- #endif
-
- #define CY_HAL_DEFINED
-
- #include "cyanhalomap_kernel.h"
-#endif
-/***** eof OMAP5912 Kernel HAL  ****/
-
-
-
-/***** OMAP3430 Kernel HAL  ****/
-#ifdef CONFIG_MACH_OMAP3_WESTBRIDGE_AST_PNAND_HAL
-
- #ifdef CY_HAL_DEFINED
-  #error only one HAL layer can be defined
- #endif
-
- #define CY_HAL_DEFINED
-/* moved to staging location, eventual implementation
- * considered is here
- * #include mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h>
-*/
- #include "../../../arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h"
-
-#endif
-/*****************************/
-
-
-/******/
-#ifdef __CY_ASTORIA_CUSTOMER_HAL__
-#ifdef CY_HAL_DEFINED
-#error only one HAL layer can be defined
-#endif
-br
-#define CY_HAL_DEFINED
-#include "cyashal_customer.h"
-
-#endif
-
-#endif			/* __doxygen__ */
-
-#endif			/* _INCLUDED_CYASHAL_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashalcb.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashalcb.h
deleted file mode 100644
index 4d1670ee0476..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashalcb.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* Cypress West Bridge API header file (cyashalcb.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASHALCB_H_
-#define _INCLUDED_CYASHALCB_H_
-
-/* Summary
-   This type defines a callback function type called when a
-   DMA operation has completed.
-
-   Description
-
-   See Also
-   * CyAsHalDmaRegisterCallback
-   * CyAsHalDmaSetupWrite
-   * CyAsHalDmaSetupRead
-*/
-typedef void (*cy_as_hal_dma_complete_callback)(
-	cy_as_hal_device_tag tag,
-	cy_as_end_point_number_t ep,
-	uint32_t cnt,
-	cy_as_return_status_t ret);
-
-typedef cy_as_hal_dma_complete_callback \
-	cy_an_hal_dma_complete_callback;
-#endif
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashaldoc.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashaldoc.h
deleted file mode 100644
index 5bcbe9bf2f5d..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashaldoc.h
+++ /dev/null
@@ -1,800 +0,0 @@
-/* Cypress West Bridge API header file (cyashaldoc.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASHALDOC_H_
-#define _INCLUDED_CYASHALDOC_H_
-
-#include "cyashaldef.h"
-
-/*@@Hardware Abstraction Layer (HAL)
-	Summary
-	This software module is supplied by the user of the West Bridge
-	API.  This module contains the software that is specific to the
-	hardware implementation or operating system of the client
-	system.
-
-	* Sleep Channels *
-	A sleep channel is a operating system object that provides that
-	capability for one thread or process to sleep while waiting on
-	the completion of some hardware event. The hardware event is
-	usually processed by a hardware interrupt and the interrupt
-	handler then wakes the thread or process that is sleeping.
-
-	A sleep channel provides the mechanism for this operation.  A
-	sleep channel is created and initialized during the API
-	initialization. When the API needs to wait for the hardware,
-	the API performs a SleepOn() operation on the sleep channel.
-	When hardware event occurs, an interrupt handler processes the
-	event and then performs a Wake() operation on the sleep channel
-	to wake the sleeping process or thread.
-
-	* DMA Model *
-	When the West Bridge API needs to transfer USB or storage data
-	to/from the West Bridge device, this is done using a "DMA"
-	operation.  In this context the term DMA is used loosely as the
-	West Bridge API does not really care if the data is transferred
-	using a burst read or write operation, or if the data is
-	transferred using programmed I/O operations.  When a "DMA"
-	operation is needed, the West Bridge API calls either
-	CyAsHalDmaSetupRead() or CyAsHalDmaSetupWrite() depending on the
-	direction of the data flow.  The West Bridge API expects the
-	"DMA" operation requested in the call to be completed and the
-	registered "DMA complete" callback to be called.
-
-	The West Bridge API looks at several factors to determine the
-	size of the "DMA" request to pass to the HAL layer.  First the
-	West Bridge API calls CyAsHalDmaMaxRequestSize() to determine
-	the maximum amount of data the HAL layer can accept for a "DMA"
-	operation on the requested endpoint.  The West Bridge API will
-	never exceed this value in a "DMA" request to the HAL layer.
-	The West Bridge API also sends the maximum amount of data the
-	West Bridge device can accept as part of the "DMA" request. If
-	the amount of data in the "DMA" request to the HAL layer
-	exceeds the amount of data the West Bridge device can accept,
-	it is expected that the HAL layer has the ability to break the
-	request into multiple operations.
-
-	If the HAL implementation requires the API to handle the size
-	of the "DMA" requests for one or more endpoints, the value
-	CY_AS_DMA_MAX_SIZE_HW_SIZE can be returned from the
-	CyAsHalDmaMaxRequestSize() call.  In this case, the API assumes
-	that the maximum size of each "DMA" request should be limited
-	to the maximum that can be accepted by the endpoint in question.
-
-	Notes
-	See the <install>/api/hal/scm_kernel/cyashalscm_kernel.c file
-	for an example of how the DMA request size can be managed by
-	the HAL implementation.
-
-	* Interrupt Handling *
-	The HAL implementation is required to handle interrupts arriving
-	from the West Bridge device, and call the appropriate handlers.
-	If the interrupt arriving is one of PLLLOCKINT, PMINT, MBINT or
-	MCUINT, the CyAsIntrServiceInterrupt API should be called to
-	service the interrupt.  If the interrupt arriving is DRQINT, the
-	HAL should identify the endpoint corresponding to which the DRQ
-	is being generated and perform the read/write transfer from the
-	West Bridge. See the <install>/api/hal/scm_kernel/
-	cyashalscm_kernel.c or <install>/api/hal/fpga/cyashalfpga.c
-	reference HAL implementations for examples.
-
-	The HAL implementation can choose to poll the West Bridge
-	interrupt status register instead of using interrupts.  In this
-	case, the polling has to be performed from a different thread/
-	task than the one running the APIs.  This is required because
-	there are API calls that block on the reception of data from the
-	West Bridge, which is delivered only through the interrupt
-	handlers.
-
-	* Required Functions *
-	This section defines the types and functions that must be
-	supplied in order to provide a complete HAL layer for the
-	West Bridge API.
-
-	Types that must be supplied:
-	* CyAsHalSleepChannel
-
-	Hardware functions that must be supplied:
-	* CyAsHalWriteRegister
-	* CyAsHalReadRegister
-	* CyAsHalDmaSetupWrite
-	* CyAsHalDmaSetupRead
-	* CyAsHalDmaCancelRequest
-	* CyAsHalDmaRegisterCallback
-	* CyAsHalDmaMaxRequestSize
-	* CyAsHalSetWakeupPin
-	* CyAsHalSyncDeviceClocks
-	* CyAsHalInitDevRegisters
-	* CyAsHalReadRegsBeforeStandby
-	* CyAsHalRestoreRegsAfterStandby
-
-	Operating system functions that must be supplied:
-	* CyAsHalAlloc
-	* CyAsHalFree
-	* CyAsHalCBAlloc
-	* CyAsHalCBFree
-	* CyAsHalMemSet
-	* CyAsHalCreateSleepChannel
-	* CyAsHalDestroySleepChannel
-	* CyAsHalSleepOn
-	* CyAsHalWake
-	* CyAsHalDisableInterrupts
-	* CyAsHalEnableInterrupts
-	* CyAsHalSleep150
-	* CyAsHalSleep
-	* CyAsHalAssert
-	* CyAsHalPrintMessage
-	* CyAsHalIsPolling
-*/
-
-/* Summary
-   This is the type that represents a sleep channel
-
-   Description
-   A sleep channel is an operating system object that, when a
-   thread of control waits on the sleep channel, the thread
-   sleeps until another thread signals the sleep object. This
-   object is generally used when a high level API is called
-   and must wait for a response that is supplied in an interrupt
-   handler.  The thread calling the API is put into a sleep
-   state and when the reply arrives via the interrupt handler,
-   the interrupt handler wakes the sleeping thread to indicate
-   that the expect reply is available.
-*/
-typedef struct cy_as_hal_sleep_channel {
-	/* This structure is filled in with OS specific information
-	to implementat a sleep channel */
-	int					m_channel;
-} cy_as_hal_sleep_channel;
-
-/* Summary
-   This function is called to write a register value
-
-   Description
-   This function is called to write a specific register to a
-   specific value.  The tag identifies the device of interest.
-   The address is relative to the base address of the West
-   Bridge device.
-
-   Returns
-   Nothing
-
-   See Also
-   * CyAsHalDeviceTag
-   * CyAsHalReadRegister
-*/
-EXTERN void
-cy_as_hal_write_register(
-/* The tag to ID a specific West Bridge device */
-	cy_as_hal_device_tag			tag,
-	/* The address we are writing to */
-	uint16_t				addr,
-	/* The value to write to the register */
-	uint16_t				value
-	);
-
-/* Summary
-   This function is called to read a register value
-
-   Description
-   This function is called to read the contents of a specific
-   register. The tag identifies the device of interest. The
-   address is relative to the base address of the West Bridge
-   device.
-
-   Returns
-   Contents of the register
-
-   See Also
-   * CyAsHalDeviceTag
-   * CyAsHalWriteRegister
-*/
-EXTERN uint16_t
-cy_as_hal_read_register(
-	/* The tag to ID a specific West Bridge device */
-	cy_as_hal_device_tag tag,
-	/* The address we are writing to */
-	uint16_t addr
-	);
-
-/* Summary
-   This function initiates a DMA write operation to write
-   to West Bridge
-
-   Description
-   This function initiates a DMA write operation.  The request
-   size will not exceed the value the HAL layer returned via
-   CyAsHalDmaMaxRequestSize().  This request size may exceed
-   the size of what the West Bridge device will accept as on
-   packet and the HAL layer may need to divide the request
-   into multiple hardware DMA operations.
-
-   Returns
-   None
-
-   See Also
-   * CyAsHalDmaSetupRead
-   * CyAsHalDmaMaxRequestSize
-*/
-EXTERN void
-cy_as_hal_dma_setup_write(
-	/* The tag to ID a specific West Bridge device */
-	cy_as_hal_device_tag			tag,
-	/* The endpoint we are writing to */
-	cy_as_end_point_number_t		ep,
-	/* The data to write via DMA */
-	void *buf_p,
-	/* The size of the data at buf_p */
-	uint32_t				size,
-	/* The maximum amount of data that the endpoint
-	 * can accept as one packet */
-	uint16_t				maxsize
-	);
-
-/* Summary
-   This function initiates a DMA read operation from West Bridge
-
-   Description
-   This function initiates a DMA read operation.  The request
-   size will not exceed the value the HAL layer returned via
-   CyAsHalDmaMaxRequestSize().  This request size may exceed
-   the size of what the Anitoch will accept as one packet and
-   the HAL layer may need to divide the request into multiple
-   hardware DMA operations.
-
-   Returns
-   None
-
-   See Also
-   * CyAsHalDmaSetupRead
-   * CyAsHalDmaMaxRequestSize
-*/
-EXTERN void
-cy_as_hal_dma_setup_read(
-	/* The tag to ID a specific West Bridge device */
-	cy_as_hal_device_tag			tag,
-	/* The endpoint we are reading from */
-	cy_as_end_point_number_t		ep,
-	/* The buffer to read data into */
-	void *buf_p,
-	/* The amount of data to read */
-	uint32_t				size,
-	/* The maximum amount of data that the endpoint
-	 * can provide in one DMA operation */
-	uint16_t				maxsize
-	);
-
-/* Summary
-   This function cancels a pending DMA request
-
-   Description
-   This function cancels a pending DMA request that has been
-   passed down to the hardware.  The HAL layer can elect to
-   physically cancel the request if possible, or just ignore
-   the results of the request if it is not possible.
-
-   Returns
-   None
-*/
-EXTERN void
-cy_as_hal_dma_cancel_request(
-	/* The tag to ID a specific West Bridge device */
-	cy_as_hal_device_tag			tag,
-	/* The endpoint we are reading from */
-	cy_as_end_point_number_t		ep
-	);
-
-/* Summary
-   This function registers a callback function to be called when
-   a DMA request is completed
-
-   Description
-   This function registers a callback that is called when a request
-   issued via CyAsHalDmaSetupWrite() or CyAsHalDmaSetupRead() has
-   completed.
-
-   Returns
-   None
-
-   See Also
-   * CyAsHalDmaSetupWrite
-   * CyAsHalDmaSetupRead
-*/
-EXTERN void
-cy_as_hal_dma_register_callback(
-	/* The tag to ID a specific West Bridge device */
-	cy_as_hal_device_tag tag,
-	/* The callback to call when a request has completed */
-	cy_as_hal_dma_complete_callback		cb
-	);
-
-/* Summary
-   This function returns the maximum size of a DMA request that can
-   be handled by the HAL.
-
-   Description
-   When DMA requests are passed to the HAL layer for processing,
-   the HAL layer may have a limit on the size of the request that
-   can be handled.  This function is called by the DMA manager for
-   an endpoint when DMA is enabled to get the maximum size of data
-   the HAL layer can handle. The DMA manager insures that a request
-   is never sent to the HAL layer that exceeds the size returned by
-   this function.
-
-   Returns
-   the maximum size of DMA request the HAL layer can handle
-*/
-EXTERN uint32_t
-cy_as_hal_dma_max_request_size(
-	/* The tag to ID a specific West Bridge device */
-	cy_as_hal_device_tag tag,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t ep
-	);
-
-/* Summary
-   This function sets the WAKEUP pin to a specific state on the
-   West Bridge device.
-
-   Description
-   In order to enter the standby mode, the WAKEUP pin must be
-   de-asserted.  In order to resume from standby mode, the WAKEUP
-   pin must be asserted.  This function provides the mechanism to
-   do this.
-
-   Returns
-   1 if the pin was changed, 0 if the HAL layer does not support
-   changing this pin
-*/
-EXTERN uint32_t
-cy_as_hal_set_wakeup_pin(
-	/* The tag to ID a specific West Bridge device */
-	cy_as_hal_device_tag tag,
-	/* The desired state of the wakeup pin */
-	cy_bool	state
-	);
-
-/* Summary
-   Synchronise the West Bridge device clocks to re-establish device
-   connectivity.
-
-   Description
-   When the Astoria bridge device is working in SPI mode, a long
-   period of inactivity can cause a loss of serial synchronisation
-   between the processor and Astoria.  This function is called by
-   the API when it detects such a condition, and is expected to take
-   the action required to re-establish clock synchronisation between
-   the devices.
-
-   Returns
-   CyTrue if the attempt to re-synchronise is successful,
-   CyFalse if not.
- */
-EXTERN cy_bool
-cy_as_hal_sync_device_clocks(
-	/* The tag to ID a specific West Bridge device */
-	cy_as_hal_device_tag tag,
-	);
-
-/* Summary
-   Initialize West Bridge device registers that may have been
-   modified while the device was in standby.
-
-   Description
-   The content of some West Bridge registers may be lost when
-   the device is placed in standby mode.  This function restores
-   these register contents so that the device can continue to
-   function normally after it wakes up from standby mode.
-
-   This function is required to perform operations only when the
-   API is being used with the Astoria device in one of the PNAND
-   modes or in the PSPI mode.  It can be a no-operation in all
-   other cases.
-
-   Returns
-   None
- */
-EXTERN void
-cy_as_hal_init_dev_registers(
-	/* The tag to ID a specific West Bridge device */
-	cy_as_hal_device_tag tag,
-	/* Indicates whether this is a wake-up from standby. */
-	cy_bool	is_standby_wakeup
-	);
-
-/* Summary
-   This function reads a set of P-port accessible device registers and
-   stores their value for later use.
-
-   Description
-   The West Bridge Astoria device silicon has a known problem when
-   operating in SPI mode on the P-port, where some of the device
-   registers lose their value when the device goes in and out of
-   standby mode.  The suggested work-around is to reset the Astoria
-   device as part of the wakeup procedure from standby.
-
-   This requires that the values of some of the P-port accessible
-   registers be restored to their pre-standby values after it has
-   been reset.  This HAL function can be used to read and store
-   the values of these registers at the point where the device is
-   being placed in standby mode.
-
-   Returns
-   None
-
-   See Also
-   * CyAsHalRestoreRegsAfterStandby
- */
-EXTERN void
-cy_as_hal_read_regs_before_standby(
-	/* The tag to ID a specific West Bridge device */
-	cy_as_hal_device_tag tag
-	);
-
-/* Summary
-   This function restores the old values to a set of P-port
-   accessible device registers.
-
-   Description
-   This function is part of the work-around to a known West
-   Bridge Astoria device error when operating in SPI mode on
-   the P-port.  This function is used to restore a set of
-   P-port accessible registers to the values they had before
-   the device was placed in standby mode.
-
-   Returns
-   None
-
-   See Also
-   * CyAsHalRestoreRegsAfterStandby
- */
-EXTERN void
-cy_as_hal_restore_regs_after_standby(
-	/* The tag to ID a specific West Bridge device */
-	cy_as_hal_device_tag tag
-	);
-
-/*
- * The functions below this comment are part of the HAL layer,
- * as the HAL layer consists of the abstraction to both the
- * hardware platform and the operating system.  However; the
- * functions below this comment all relate to the operating
- * environment and not specifically to the hardware platform
- * or specific device.
- */
-
-/* Summary
-   This function allocates a block of memory
-
-   Description
-   This is the HAL layer equivalent of the malloc() function.
-
-   Returns
-   a pointer to a block of memory
-
-   See Also
-   * CyAsHalFree
-*/
-EXTERN void *
-cy_as_hal_alloc(
-	/* The size of the memory block to allocate */
-	uint32_t				size
-	);
-
-/* Summary
-   This function frees a previously allocated block of memory
-
-   Description
-   This is the HAL layer equivalent of the free() function.
-
-   Returns
-   None
-
-   See Also
-   * CyAsHalAlloc
-*/
-EXTERN void
-cy_as_hal_free(
-	/* Pointer to a memory block to free */
-	void *ptr
-	);
-
-/* Summary
-   This function is a malloc equivalent that can be used from an
-   interrupt context.
-
-   Description
-   This function is a malloc equivalent that will be called from the
-   API in callbacks. This function is required to be able to provide
-   memory in interrupt context.
-
-   Notes
-   For platforms where it is not possible to allocate memory in interrupt
-   context, we provide a reference allocator that takes memory during
-   initialization and implements malloc/free using this memory.
-   See the <install>/api/hal/fpga/cyashalblkalloc.[ch] files for the
-   implementation, and the <install>/api/hal/fpga/cyashalfpga.c file
-   for an example of the use of this allocator.
-
-   Returns
-   A pointer to the allocated block of memory
-
-   See Also
-   * CyAsHalCBFree
-   * CyAsHalAlloc
-*/
-EXTERN void *
-cy_as_hal_c_b_alloc(
-	/* The size of the memory block to allocate */
-	uint32_t size
-	);
-
-/* Summary
-   This function frees the memory allocated through the CyAsHalCBAlloc
-   call.
-
-   Description
-   This function frees memory allocated through the CyAsHalCBAlloc
-   call, and is also required to support calls from interrupt
-   context.
-
-   Returns
-   None
-
-   See Also
-   * CyAsHalCBAlloc
-   * CyAsHalFree
-*/
-EXTERN void
-cy_as_hal_c_b_free(
-	/* Pointer to the memory block to be freed */
-	void *ptr
-	);
-
-/* Summary
-   This function sets a block of memory to a specific value
-
-   Description
-   This function is the HAL layer equivalent of the memset() function.
-
-   Returns
-   None
-*/
-EXTERN void
-cy_as_mem_set(
-	/* A pointer to a block of memory to set */
-	void *ptr,
-	/* The value to set the memory to */
-	uint8_t	value,
-	/* The number of bytes to set */
-	uint32_t cnt
-	);
-
-/* Summary
-   This function creates or initializes a sleep channel
-
-   Description
-   This function creates or initializes a sleep channel. The
-   sleep channel defined using the HAL data structure
-   CyAsHalSleepChannel.
-
-   Returns
-   CyTrue is the initialization was successful, and CyFalse otherwise
-
-   See Also
-   * CyAsHalSleepChannel
-   * CyAsHalDestroySleepChannel
-   * CyAsHalSleepOn
-   * CyAsHalWake
-*/
-EXTERN cy_bool
-cy_as_hal_create_sleep_channel(
-	/* Pointer to the sleep channel to create/initialize */
-	cy_as_hal_sleep_channel	*chan
-	);
-
-/* Summary
-   This function destroys an existing sleep channel
-
-   Description
-   This function destroys an existing sleep channel.  The sleep channel
-   is of type CyAsHalSleepChannel.
-
-   Returns
-   CyTrue if the channel was destroyed, and CyFalse otherwise
-
-   See Also
-   * CyAsHalSleepChannel
-   * CyAsHalCreateSleepChannel
-   * CyAsHalSleepOn
-   * CyAsHalWake
-*/
-EXTERN cy_bool
-cy_as_hal_destroy_sleep_channel(
-	/* The sleep channel to destroy */
-	cy_as_hal_sleep_channel		chan
-	);
-
-/* Summary
-   This function causes the calling process or thread to sleep until
-   CyAsHalWake() is called
-
-   Description
-   This function causes the calling process or threadvto sleep.
-   When CyAsHalWake() is called on the same sleep channel, this
-   processes or thread is then wakened and allowed to run
-
-   Returns
-   CyTrue if the thread or process is asleep, and CyFalse otherwise
-
-   See Also
-   * CyAsHalSleepChannel
-   * CyAsHalWake
-*/
-EXTERN cy_bool
-cy_as_hal_sleep_on(
-	/* The sleep channel to sleep on */
-	cy_as_hal_sleep_channel chan,
-	/* The maximum time to sleep in milli-seconds */
-	uint32_t ms
-	);
-
-/* Summary
-   This function casues the process or thread sleeping on the given
-   sleep channel to wake
-
-   Description
-   This function causes the process or thread sleeping on the given
-   sleep channel to wake.  The channel
-
-   Returns
-   CyTrue if the thread or process is awake, and CyFalse otherwise
-
-   See Also
-   * CyAsHalSleepChannel
-   * CyAsHalSleepOn
-*/
-EXTERN cy_bool
-cy_as_hal_wake(
-	/* The sleep channel to wake */
-	cy_as_hal_sleep_channel		chan
-	);
-
-/* Summary
-   This function disables interrupts, insuring that short bursts
-   of code can be run without danger of interrupt handlers running.
-
-   Description
-   There are cases within the API when lists must be manipulated by
-   both the API and the associated interrupt handlers.  In these
-   cases, interrupts must be disabled to insure the integrity of the
-   list during the modification. This function is used to disable
-   interrupts during the short intervals where these lists are being
-   changed.
-
-   The HAL must have the ability to nest calls to
-   CyAsHalDisableInterrupts and CyAsHalEnableInterrupts.
-
-   Returns
-   Any interrupt related state value which will be passed back into
-   the subsequent CyAsHalEnableInterrupts call.
-
-   See Also
-   * CyAsHalEnableInterrupts
-*/
-EXTERN uint32_t
-cy_as_hal_disable_interrupts();
-
-/* Summary
-   This function re-enables interrupts after a critical section of
-   code in the API has been completed.
-
-   Description
-   There are cases within the API when lists must be manipulated by
-   both the API and the associated interrupt handlers.  In these
-   cases, interrupts must be disabled to insure the integrity of the
-   list during the modification.  This function is used to enable
-   interrupts after the short intervals where these lists are being
-   changed.
-
-   See Also
-   * CyAsHalDisableInterrupts
-*/
-EXTERN void
-cy_as_hal_enable_interrupts(
-	/* Value returned by the previous CyAsHalDisableInterrupts call. */
-	uint32_t value
-	);
-
-/* Summary
-   This function sleeps for 150 ns.
-
-   Description
-   This function sleeps for 150 ns before allowing the calling function
-   to continue.  This function is used for a specific purpose and the
-   sleep required is at least 150 ns.
-*/
-EXTERN void
-cy_as_hal_sleep150(
-		);
-
-/* Summary
-   This function sleeps for the given number of milliseconds
-
-   Description
-   This function sleeps for at least the given number of milliseonds
-*/
-EXTERN void
-cy_as_hal_sleep(
-		uint32_t ms
-		);
-
-/* Summary
-   This function asserts when the condition evaluates to zero
-
-   Description
-   Within the API there are conditions which are checked to insure
-   the integrity of the code. These conditions are checked only
-   within a DEBUG build. This function is used to check the condition
-   and if the result evaluates to zero, it should be considered a
-   fatal error that should be reported to Cypress.
-*/
-EXTERN void
-cy_as_hal_assert(
-	/* The condition to evaluate */
-	cy_bool	cond
-	);
-
-/* Summary
-   This function prints a message from the API to a human readable device
-
-   Description
-   There are places within the West Bridge API where printing a message
-   is useful to the debug process.  This function provides the mechanism
-   to print a message.
-
-   Returns
-   NONE
-*/
-EXTERN void
-cy_as_hal_print_message(
-	/* The message to print */
-	const char *fmt_p,
-	...	/* Variable arguments */
-	);
-
-/* Summary
-   This function reports whether the HAL implementation uses
-   polling to service data coming from the West Bridge.
-
-   Description
-   This function reports whether the HAL implementation uses
-   polling to service data coming from the West Bridge.
-
-   Returns
-   CyTrue if the HAL polls the West Bridge Interrupt Status registers
-   to complete operations, CyFalse if the HAL is interrupt driven.
- */
-EXTERN cy_bool
-cy_as_hal_is_polling(
-		void);
-
-#endif
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasintr.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasintr.h
deleted file mode 100644
index 60a6fffb5d53..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasintr.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* Cypress West Bridge API header file (cyasintr.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASINTR_H_
-#define _INCLUDED_CYASINTR_H_
-
-#include "cyasdevice.h"
-
-#include "cyas_cplus_start.h"
-
-/* Summary
-   Initialize the interrupt manager module
-
-   Description
-   This function is called to initialize the interrupt module.
-   This module enables interrupts as well as servies West Bridge
-   related interrupts by determining the source of the interrupt
-   and calling the appropriate handler function.
-
-   Notes
-   If the dmaintr parameter is TRUE, the initialization code
-   initializes the interrupt mask to have the DMA related interrupt
-   enabled via the general purpose interrupt. However, the interrupt
-   service function assumes that the DMA interrupt is handled by the
-   HAL layer before the interrupt module handler function is called.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the interrupt module was initialized
-   * correctly
-   * CY_AS_ERROR_ALREADY_RUNNING - the interrupt module was already
-   * started
-
-   See Also
-   * CyAsIntrStop
-   * CyAsServiceInterrupt
-*/
-cy_as_return_status_t
-cy_as_intr_start(
-	/* Device being initialized */
-	cy_as_device *dev_p,
-	/* If true, enable the DMA interrupt through the INT signal */
-	cy_bool dmaintr
-	);
-
-/* Summary
-   Stop the interrupt manager module
-
-   Description
-   This function stops the interrupt module and masks all interrupts
-   from the West Bridge device.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the interrupt module was stopped
-   *	successfully
-   * CY_AS_ERROR_NOT_RUNNING - the interrupt module was not
-   *	running
-
-   See Also
-   * CyAsIntrStart
-   * CyAsServiceInterrupt
-*/
-cy_as_return_status_t
-cy_as_intr_stop(
-	/* Device bein stopped */
-	cy_as_device *dev_p
-	);
-
-
-/* Summary
-   The interrupt service routine for West Bridge
-
-   Description
-   When an interrupt is detected, this function is called to
-   service the West Bridge interrupt. It is safe and efficient
-   for this function to be called when no West Bridge interrupt
-   has occurred. This function will determine it is not an West
-   Bridge interrupt quickly and return.
-*/
-void cy_as_intr_service_interrupt(
-	/* The USER supplied tag for this device */
-	cy_as_hal_device_tag tag
-	);
-
-#include "cyas_cplus_end.h"
-
-#endif				  /* _INCLUDED_CYASINTR_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaslep2pep.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaslep2pep.h
deleted file mode 100644
index 6626cc454743..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaslep2pep.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Cypress West Bridge API header file (cyaslep2pep.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASLEP2PEP_H_
-#define _INCLUDED_CYASLEP2PEP_H_
-
-#include "cyasdevice.h"
-
-extern cy_as_return_status_t
-cy_as_usb_map_logical2_physical(cy_as_device *dev_p);
-
-extern cy_as_return_status_t
-cy_as_usb_setup_dma(cy_as_device *dev_p);
-
-extern cy_as_return_status_t
-cy_as_usb_set_dma_sizes(cy_as_device *dev_p);
-
-#endif
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaslowlevel.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaslowlevel.h
deleted file mode 100644
index 5c7972f91ef6..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaslowlevel.h
+++ /dev/null
@@ -1,366 +0,0 @@
-/* Cypress West Bridge API header file (cyaslowlevel.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASLOWLEVEL_H_
-#define _INCLUDED_CYASLOWLEVEL_H_
-
-/*@@Low Level Communications
-
-	Summary
-	The low level communications module is responsible for
-	communications between the West Bridge device and the P
-	port processor.  Communications is organized as a series
-	of requests and subsequent responses. For each request
-	there is a one and only one response. Requests may go
-	from the West Bridge device to the P port processor, or
-	from the P Port processor to the West Bridge device.
-
-	Description
-	Requests are issued across what is called a context. A
-	context is a single channel of communications from one
-	processor to another processor. There can be only a single
-	request outstanding on a context at a given time. Contexts
-	are used to identify subsystems that can only process a
-	single request at a time, but are independent of other
-	contexts in the system. For instance, there is a context
-	for communicating storage commands from the P port processor
-	to the West Bridge device.  There is also a context for
-	communicating USB commands from the P port processor to the
-	West Bridge device.
-
-	Requests and responses are identical with the exception of
-	the type bit in the request/response header.  If the type
-	bit is one, the packet is a request. If this bit is zero,
-	the packet is a response. Also encoded within the header of
-	the request/response is the code. The code is a command
-	code for a request, or a response code for a response.  For
-	a request, the code is a function of the context.  The code
-	0 has one meaning for the storage context and a different
-	meaning for the USB context.  The code is treated differently
-	in the response. If the code in the response is less than 16,
-	then the meaning of the response is global across all
-	contexts. If the response is greater than or equal to 16,
-	then the response is specific to the associated context.
-
-	Requests and responses are transferred between processors
-	through the mailbox registers.  It may take one or more cycles
-	to transmit a complete request or response.  The context is
-	encoded into each cycle of the transfer to insure the
-	receiving processor can route the data to the appropriate
-	context for processing. In this way, the traffic from multiple
-	contexts can be multiplexed into a single data stream through
-	the mailbox registers by the sending processor, and
-	demultiplexed from the mailbox registers by the receiving
-	processor.
-
-	* Firmware Assumptions *
-	The firmware assumes that mailbox contents will be consumed
-	immediately. Therefore for multi-cycle packets, the data is
-	sent in a tight polling loop from the firmware. This implies
-	that the data must be read from the mailbox register on the P
-	port side and processed immediately or performance of the
-	firmware will suffer. In order to insure this is the case,
-	the data from the mailboxes is read and stored immediately
-	in a per context buffer. This occurs until the entire packet
-	is received at which time the request packet is processed.
-	Since the protocol is designed to allow for only one
-	outstanding packet at a time, the firmware can never be in a
-	position of waiting on the mailbox registers while the P port
-	is processing a request.  Only after the response to the
-	previous request is sent will another request be sent.
-*/
-
-#include "cyashal.h"
-#include "cyasdevice.h"
-
-#include "cyas_cplus_start.h"
-
-/*
- * Constants
- */
-#define CY_AS_REQUEST_RESPONSE_CODE_MASK (0x00ff)
-#define CY_AS_REQUEST_RESPONSE_CONTEXT_MASK	(0x0F00)
-#define CY_AS_REQUEST_RESPONSE_CONTEXT_SHIFT (8)
-#define CY_AS_REQUEST_RESPONSE_TYPE_MASK (0x4000)
-#define CY_AS_REQUEST_RESPONSE_LAST_MASK (0x8000)
-#define CY_AS_REQUEST_RESPONSE_CLEAR_STR_FLAG (0x1000)
-
-/*
- * These macros extract the data from a 16 bit value
- */
-#define cy_as_mbox_get_code(c) \
-	((uint8_t)((c) & CY_AS_REQUEST_RESPONSE_CODE_MASK))
-#define cy_as_mbox_get_context(c) \
-	((uint8_t)(((c) & CY_AS_REQUEST_RESPONSE_CONTEXT_MASK) \
-		>> CY_AS_REQUEST_RESPONSE_CONTEXT_SHIFT))
-#define cy_as_mbox_is_last(c) \
-	((c) & CY_AS_REQUEST_RESPONSE_LAST_MASK)
-#define cy_as_mbox_is_request(c) \
-	(((c) & CY_AS_REQUEST_RESPONSE_TYPE_MASK) != 0)
-#define cy_as_mbox_is_response(c) \
-	(((c) & CY_AS_REQUEST_RESPONSE_TYPE_MASK) == 0)
-
-/*
- * These macros (not yet written) pack data into or extract data
- * from the m_box0 field of the request or response
- */
-#define cy_as_ll_request_response__set_code(req, code) \
-		((req)->box0 = \
-		((req)->box0 & ~CY_AS_REQUEST_RESPONSE_CODE_MASK) | \
-			(code & CY_AS_REQUEST_RESPONSE_CODE_MASK))
-
-#define cy_as_ll_request_response__get_code(req) \
-	cy_as_mbox_get_code((req)->box0)
-
-#define cy_as_ll_request_response__set_context(req, context) \
-		((req)->box0 |= ((context) << \
-			CY_AS_REQUEST_RESPONSE_CONTEXT_SHIFT))
-
-#define cy_as_ll_request_response__set_clear_storage_flag(req) \
-		((req)->box0 |= CY_AS_REQUEST_RESPONSE_CLEAR_STR_FLAG)
-
-#define cy_as_ll_request_response__get_context(req) \
-	cy_as_mbox_get_context((req)->box0)
-
-#define cy_as_ll_request_response__is_last(req) \
-	cy_as_mbox_is_last((req)->box0)
-
-#define CY_an_ll_request_response___set_last(req) \
-		((req)->box0 |= CY_AS_REQUEST_RESPONSE_LAST_MASK)
-
-#define cy_as_ll_request_response__is_request(req) \
-	cy_as_mbox_is_request((req)->box0)
-
-#define cy_as_ll_request_response__set_request(req) \
-		((req)->box0 |= CY_AS_REQUEST_RESPONSE_TYPE_MASK)
-
-#define cy_as_ll_request_response__set_response(req) \
-		((req)->box0 &= ~CY_AS_REQUEST_RESPONSE_TYPE_MASK)
-
-#define cy_as_ll_request_response__is_response(req) \
-	cy_as_mbox_is_response((req)->box0)
-
-#define cy_as_ll_request_response__get_word(req, offset) \
-	((req)->data[(offset)])
-
-#define cy_as_ll_request_response__set_word(req, offset, \
-	value) ((req)->data[(offset)] = value)
-
-typedef enum cy_as_remove_request_result_t {
-	cy_as_remove_request_sucessful,
-	cy_as_remove_request_in_transit,
-	cy_as_remove_request_not_found
-} cy_as_remove_request_result_t;
-
-/* Summary
-   Start the low level communications module
-
-   Description
-*/
-cy_as_return_status_t
-cy_as_ll_start(
-		cy_as_device *dev_p
-		);
-
-cy_as_return_status_t
-cy_as_ll_stop(
-   cy_as_device *dev_p
-   );
-
-
-cy_as_ll_request_response *
-cy_as_ll_create_request(
-		cy_as_device *dev_p,
-		uint16_t code,
-		uint8_t context,
-		/* Length of the request in 16 bit words */
-		uint16_t length
-		);
-
-void
-cy_as_ll_init_request(
-	cy_as_ll_request_response *req_p,
-	uint16_t code,
-	uint16_t context,
-	uint16_t length);
-
-void
-cy_as_ll_init_response(
-	cy_as_ll_request_response *req_p,
-	uint16_t length);
-
-void
-cy_as_ll_destroy_request(
-		cy_as_device *dev_p,
-		cy_as_ll_request_response *);
-
-cy_as_ll_request_response *
-cy_as_ll_create_response(
-		cy_as_device *dev_p,
-		/* Length of the request in 16 bit words */
-		uint16_t length
-		);
-
-cy_as_remove_request_result_t
-cy_as_ll_remove_request(
-		cy_as_device *dev_p,
-		cy_as_context *ctxt_p,
-		cy_as_ll_request_response *req_p,
-		cy_bool force
-		);
-void
-cy_as_ll_remove_all_requests(cy_as_device *dev_p,
-	cy_as_context *ctxt_p);
-
-void
-cy_as_ll_destroy_response(
-	cy_as_device *dev_p,
-	cy_as_ll_request_response *);
-
-cy_as_return_status_t
-cy_as_ll_send_request(
-	/* The West Bridge device */
-	cy_as_device *dev_p,
-	/* The request to send */
-	cy_as_ll_request_response *req,
-	/* Storage for a reply, must be sure it is of sufficient size */
-	cy_as_ll_request_response *resp,
-	/* If true, this is a sync request */
-	cy_bool	sync,
-	/* Callback to call when reply is received */
-	cy_as_response_callback cb
-);
-
-cy_as_return_status_t
-cy_as_ll_send_request_wait_reply(
-	/* The West Bridge device */
-	cy_as_device *dev_p,
-	/* The request to send */
-	cy_as_ll_request_response *req,
-	/* Storage for a reply, must be sure it is of sufficient size */
-	cy_as_ll_request_response *resp
-);
-
-/* Summary
-   This function registers a callback function to be called when a
-   request arrives on a given context.
-
-   Description
-
-   Returns
-   * CY_AS_ERROR_SUCCESS
-*/
-extern cy_as_return_status_t
-cy_as_ll_register_request_callback(
-		cy_as_device *dev_p,
-		uint8_t context,
-		cy_as_response_callback cb
-		);
-
-/* Summary
-   This function packs a set of bytes given by the data_p pointer
-   into a request, reply structure.
-*/
-extern void
-cy_as_ll_request_response__pack(
-	/* The destintation request or response */
-	cy_as_ll_request_response *req,
-	/* The offset of where to pack the data */
-	uint32_t offset,
-	/* The length of the data to pack in bytes */
-	uint32_t length,
-	/* The data to pack */
-	void *data_p
-	);
-
-/* Summary
-   This function unpacks a set of bytes from a request/reply
-   structure into a segment of memory given by the data_p pointer.
-*/
-extern void
-cy_as_ll_request_response__unpack(
-	/* The source of the data to unpack */
-	cy_as_ll_request_response *req,
-	/* The offset of the data to unpack */
-	uint32_t offset,
-	/* The length of the data to unpack in bytes */
-	uint32_t length,
-	/* The destination of the unpack operation */
-	void *data_p
-	);
-
-/* Summary
-   This function sends a status response back to the West Bridge
-   device in response to a previously send request
-*/
-extern cy_as_return_status_t
-cy_as_ll_send_status_response(
-	 /* The West Bridge device */
-	cy_as_device *dev_p,
-	/* The context to send the response on */
-	uint8_t context,
-	/* The success/failure code to send */
-	uint16_t code,
-	/* Flag to clear wait on storage context */
-	uint8_t clear_storage);
-
-/* Summary
-   This function sends a response back to the West Bridge device.
-
-   Description
-   This function sends a response back to the West Bridge device.
-   The response is sent on the context given by the 'context'
-   variable.  The code for the response is given by the 'code'
-   argument.  The data for the response is given by the data and
-   length arguments.
-*/
-extern cy_as_return_status_t
-cy_as_ll_send_data_response(
-	/* The West Bridge device */
-	cy_as_device *dev_p,
-	/* The context to send the response on */
-	uint8_t context,
-	/* The response code to use */
-	uint16_t code,
-	/* The length of the data for the response */
-	uint16_t length,
-	/* The data for the response */
-	void *data
-);
-
-/* Summary
-   This function removes any requests of the given type
-   from the given context.
-
-   Description
-   This function removes requests of a given type from the
-   context given via the context number.
-*/
-extern cy_as_return_status_t
-cy_as_ll_remove_ep_data_requests(
-	/* The West Bridge device */
-	cy_as_device *dev_p,
-	cy_as_end_point_number_t ep
-	);
-
-#include "cyas_cplus_end.h"
-
-#endif				  /* _INCLUDED_CYASLOWLEVEL_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmedia.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmedia.h
deleted file mode 100644
index 0e25ea94481f..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmedia.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* Cypress West Bridge API header file (cyasmedia.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASMEDIA_H_
-#define _INCLUDED_CYASMEDIA_H_
-
-#include "cyas_cplus_start.h"
-
-
-/* Summary
-   Specifies a specific type of media supported by West Bridge
-
-   Description
-   The West Bridge device supports five specific types of media
-   as storage/IO devices attached to it's S-Port.  This type is
-   used to indicate the type of  media being referenced in any
-   API call.
-*/
-typedef enum cy_as_media_type {
-	/* Flash NAND memory (may be SLC or MLC) */
-	cy_as_media_nand = 0x00,
-	/* An SD flash memory device */
-	cy_as_media_sd_flash = 0x01,
-	/* An MMC flash memory device */
-	cy_as_media_mmc_flash = 0x02,
-	/* A CE-ATA disk drive */
-	cy_as_media_ce_ata = 0x03,
-	/* SDIO device. */
-	cy_as_media_sdio = 0x04,
-	cy_as_media_max_media_value = 0x05
-
-} cy_as_media_type;
-
-#include "cyas_cplus_end.h"
-
-#endif				/* _INCLUDED_CYASMEDIA_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc.h
deleted file mode 100644
index df7c2b66cf27..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc.h
+++ /dev/null
@@ -1,1549 +0,0 @@
-/* Cypress West Bridge API header file (cyasmisc.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASMISC_H_
-#define _INCLUDED_CYASMISC_H_
-
-#include "cyashal.h"
-#include "cyastypes.h"
-#include "cyasmedia.h"
-
-#include "cyas_cplus_start.h"
-
-#define CY_AS_LEAVE_STANDBY_DELAY_CLOCK	(1)
-#define CY_AS_RESET_DELAY_CLOCK	(1)
-
-#define CY_AS_LEAVE_STANDBY_DELAY_CRYSTAL (5)
-#define CY_AS_RESET_DELAY_CRYSTAL (5)
-
-/* The maximum number of buses supported */
-#define	CY_AS_MAX_BUSES	(2)
-
-/* The maximum number of storage devices supported per bus */
-#define	CY_AS_MAX_STORAGE_DEVICES (1)
-
-#define CY_AS_FUNCTCBTYPE_DATA_MASK (0x60000000U)
-#define CY_AS_FUNCTCBTYPE_TYPE_MASK (0x1FFFFFFFU)
-
-#define cy_as_funct_c_b_type_get_type(t) \
-	((cy_as_funct_c_b_type)((t) & CY_AS_FUNCTCBTYPE_TYPE_MASK))
-#define cy_as_funct_c_b_type_contains_data(t) \
-	(((cy_as_funct_c_b_type)((t) & \
-		CY_AS_FUNCTCBTYPE_DATA_MASK)) == CY_FUNCT_CB_DATA)
-
-/**************************************
- * West Bridge Types
- **************************************/
-
-/* Summary
-   Specifies a handle to an West Bridge device
-
-   Description
-   This type represents an opaque handle to an West Bridge device.
-   This handle is created via the CyAsMiscCreateDevice() function
-   and is used in all subsequent calls that communicate to the West
-   Bridge device.
-
-   See Also
-   * CyAsMiscCreateDevice
-   * CyAsMiscDestroyDevice
-*/
-typedef void *cy_as_device_handle;
-
-/* Summary
-   This data type gives the mode for the DACK# signal
-*/
-typedef enum cy_as_device_dack_mode {
-	cy_as_device_dack_ack, /* Operate in the ACK mode */
-	cy_as_device_dack_eob /* Operate in the EOB mode */
-} cy_as_device_dack_mode;
-
-/* Summary
-   This data structure gives the options for all hardware features.
-
-   Description
-   This structure contains the information required to initialize the
-   West Bridge hardware. Any features of the device that can be
-   configured by the caller are specified here.
-
-   See Also
-   * CyAsMiscConfigure
-*/
-typedef struct cy_as_device_config {
-	/* If TRUE, the P port is running in SRAM mode. */
-	cy_bool	srammode;
-	/* If TRUE, the P port is synchronous, otherwise async */
-	cy_bool	sync;
-	/* If TRUE, DMA req will be delivered via the interrupt signal */
-	cy_bool	dmaintr;
-	/* Mode for the DACK# signal */
-	cy_as_device_dack_mode dackmode;
-	/* If TRUE, the DRQ line is active high, otherwise active low */
-	cy_bool	drqpol;
-	/* If TRUE, the DACK line is active high, otherwise active low */
-	cy_bool	dackpol;
-	/* If TRUE, the clock is connected to a crystal, otherwise it is
-			connected to a clock */
-	cy_bool	crystal;
-} cy_as_device_config;
-
-
-/* Summary
-   Specifies a resource that can be owned by either the West Bridge
-   device or by the processor.
-
-   Description
-   This enumerated type identifies a resource that can be owned
-   either by the West Bridge device, or by the processor attached to
-   the P port of the West Bridge device.
-
-   See Also
-   * CyAsMiscAcquireResource
-   * CyAsMiscReleaseResource
-*/
-typedef enum cy_as_resource_type {
-	cy_as_bus_u_s_b = 0, /* The USB D+ and D- pins */
-	cy_as_bus_1  = 1, /* The SDIO bus */
-	cy_as_bus_0  = 2	/* The NAND bus (not implemented) */
-} cy_as_resource_type;
-
-/* Summary
-   Specifies the reset type for a software reset operation.
-
-   Description
-   When the West Bridge device is reset, there are two types of
-   reset that arE possible.  This type indicates the type of reset
-   requested.
-
-   Notes
-   Both of these reset types are software based resets; and are
-   distinct from a chip level HARD reset that is applied through
-   the reset pin on the West Bridge.
-
-   The CyAsResetSoft type resets only the on-chip micro-controller
-   in the West Bridge. In this case, the previously loaded firmware
-   will continue running. However, the Storage and USB stack
-   operations will need to be restarted, as any state relating to
-   these would have been lost.
-
-   The CyAsResetHard type resets the entire West Bridge chip, and will
-   need a fresh configuration and firmware download.
-
-   See Also
-   * <LINK CyAsMiscReset>
- */
-
-typedef enum cy_as_reset_type {
-	/* Just resets the West Bridge micro-controller */
-	cy_as_reset_soft,
-	/* Resets entire device, firmware must be reloaded and
-	the west bridge device must be re-initialized */
-	cy_as_reset_hard
-} cy_as_reset_type;
-
-
-
-/* Summary
-   This type specifies the polarity of the SD power pin.
-
-   Description
-   Sets the SD power pin ( port C, bit 6) to active low or
-   active high.
-
-*/
-
-typedef enum cy_as_misc_signal_polarity {
-	cy_as_misc_active_high,
-	cy_as_misc_active_low
-
-} cy_as_misc_signal_polarity;
-
-
-
-/* Summary
-	This type specifies the type of the data returned by a Function
-	Callback.
-
-	Description
-	CY_FUNCT_CB_NODATA - This callback does not return any additional
-	information in the data field.
-	CY_FUNCT_CB_DATA   - The data field is used, and the CyAsFunctCBType
-	will also contain the type of this data.
-
-	See Also
-	CyAsFunctionCallback
-*/
-typedef enum cy_as_funct_c_b_type {
-	CY_FUNCT_CB_INVALID = 0x0U,
-	/* Data from a CyAsMiscGetFirmwareVersion call. */
-	CY_FUNCT_CB_MISC_GETFIRMWAREVERSION,
-	/* Data from a CyAsMiscHeartBeatControl call. */
-	CY_FUNCT_CB_MISC_HEARTBEATCONTROL,
-	/* Data from a CyAsMiscAcquireResource call. */
-	CY_FUNCT_CB_MISC_ACQUIRERESOURCE,
-	/* Data from a CyAsMiscReadMCURegister call. */
-	CY_FUNCT_CB_MISC_READMCUREGISTER,
-	/* Data from a CyAsMiscWriteMCURegister call. */
-	CY_FUNCT_CB_MISC_WRITEMCUREGISTER,
-	/* Data from a CyAsMiscSetTraceLevel call. */
-	CY_FUNCT_CB_MISC_SETTRACELEVEL,
-	/* Data from a CyAsMiscStorageChanged call. */
-	CY_FUNCT_CB_MISC_STORAGECHANGED,
-	/* Data from a CyAsMiscGetGpioValue call. */
-	CY_FUNCT_CB_MISC_GETGPIOVALUE,
-	/* Data from a CyAsMiscSetGpioValue call. */
-	CY_FUNCT_CB_MISC_SETGPIOVALUE,
-	/* Data from a CyAsMiscDownloadFirmware call. */
-	CY_FUNCT_CB_MISC_DOWNLOADFIRMWARE,
-	/* Data from a CyAsMiscEnterStandby call. */
-	CY_FUNCT_CB_MISC_ENTERSTANDBY,
-	/* Data from a CyAsMiscEnterSuspend call. */
-	CY_FUNCT_CB_MISC_ENTERSUSPEND,
-	/* Data from a CyAsMiscLeaveSuspend call. */
-	CY_FUNCT_CB_MISC_LEAVESUSPEND,
-	/* Data from a CyAsMiscReset call. */
-	CY_FUNCT_CB_MISC_RESET,
-	/* Data from a CyAsMiscSetLowSpeedSDFreq or
-	 * CyAsMiscSetHighSpeedSDFreq call. */
-	CY_FUNCT_CB_MISC_SETSDFREQ,
-	/* Data from a CyAsMiscSwitchPnandMode call */
-	CY_FUNCT_CB_MISC_RESERVELNABOOTAREA,
-	/* Data from a CyAsMiscSetSDPowerPolarity call */
-	CY_FUNCT_CB_MISC_SETSDPOLARITY,
-
-	/* Data from a CyAsStorageStart call. */
-	CY_FUNCT_CB_STOR_START,
-	/* Data from a CyAsStorageStop call. */
-	CY_FUNCT_CB_STOR_STOP,
-	/* Data from a CyAsStorageClaim call. */
-	CY_FUNCT_CB_STOR_CLAIM,
-	/* Data from a CyAsStorageRelease call. */
-	CY_FUNCT_CB_STOR_RELEASE,
-	/* Data from a CyAsStorageQueryMedia call. */
-	CY_FUNCT_CB_STOR_QUERYMEDIA,
-	/* Data from a CyAsStorageQueryBus call. */
-	CY_FUNCT_CB_STOR_QUERYBUS,
-	/* Data from a CyAsStorageQueryDevice call. */
-	CY_FUNCT_CB_STOR_QUERYDEVICE,
-	/* Data from a CyAsStorageQueryUnit call. */
-	CY_FUNCT_CB_STOR_QUERYUNIT,
-	/* Data from a CyAsStorageDeviceControl call. */
-	CY_FUNCT_CB_STOR_DEVICECONTROL,
-	/* Data from a CyAsStorageSDRegisterRead call. */
-	CY_FUNCT_CB_STOR_SDREGISTERREAD,
-	/* Data from a CyAsStorageCreatePartition call. */
-	CY_FUNCT_CB_STOR_PARTITION,
-	/* Data from a CyAsStorageGetTransferAmount call. */
-	CY_FUNCT_CB_STOR_GETTRANSFERAMOUNT,
-	/* Data from a CyAsStorageErase call. */
-	CY_FUNCT_CB_STOR_ERASE,
-	/* Data from a CyAsStorageCancelAsync call. */
-	CY_FUNCT_CB_ABORT_P2S_XFER,
-	/* Data from a CyAsUsbStart call. */
-	CY_FUNCT_CB_USB_START,
-	/* Data from a CyAsUsbStop call. */
-	CY_FUNCT_CB_USB_STOP,
-	/* Data from a CyAsUsbConnect call. */
-	CY_FUNCT_CB_USB_CONNECT,
-	/* Data from a CyAsUsbDisconnect call. */
-	CY_FUNCT_CB_USB_DISCONNECT,
-	/* Data from a CyAsUsbSetEnumConfig call. */
-	CY_FUNCT_CB_USB_SETENUMCONFIG,
-	/* Data from a CyAsUsbGetEnumConfig call. */
-	CY_FUNCT_CB_USB_GETENUMCONFIG,
-	/* Data from a CyAsUsbSetDescriptor call. */
-	CY_FUNCT_CB_USB_SETDESCRIPTOR,
-	/* Data from a CyAsUsbGetDescriptor call. */
-	CY_FUNCT_CB_USB_GETDESCRIPTOR,
-	/* Data from a CyAsUsbCommitConfig call. */
-	CY_FUNCT_CB_USB_COMMITCONFIG,
-	/* Data from a CyAsUsbGetNak call. */
-	CY_FUNCT_CB_USB_GETNAK,
-	/* Data from a CyAsUsbGetStall call. */
-	CY_FUNCT_CB_USB_GETSTALL,
-	/* Data from a CyAsUsbSignalRemoteWakeup call. */
-	CY_FUNCT_CB_USB_SIGNALREMOTEWAKEUP,
-	/* Data from a CyAnUsbClearDescriptors call. */
-	CY_FUNCT_CB_USB_CLEARDESCRIPTORS,
-	/* Data from a CyAnUsbSetMSReportThreshold call. */
-	CY_FUNCT_CB_USB_SET_MSREPORT_THRESHOLD,
-	/* Data from a CyAsMTPStart call. */
-	CY_FUNCT_CB_MTP_START,
-	/* Data from a CyAsMTPStop call. */
-	CY_FUNCT_CB_MTP_STOP,
-	/* Data from a CyAsMTPInitSendObject call. */
-	CY_FUNCT_CB_MTP_INIT_SEND_OBJECT,
-	/* Data from a CyAsMTPCancelSendObject call. */
-	CY_FUNCT_CB_MTP_CANCEL_SEND_OBJECT,
-	/* Data from a CyAsMTPInitGetObject call. */
-	CY_FUNCT_CB_MTP_INIT_GET_OBJECT,
-	/* Data from a CyAsMTPCancelGetObject call. */
-	CY_FUNCT_CB_MTP_CANCEL_GET_OBJECT,
-	/* Data from a CyAsMTPSendBlockTable call. */
-	CY_FUNCT_CB_MTP_SEND_BLOCK_TABLE,
-	/* Data from a CyAsMTPStopStorageOnly call. */
-	CY_FUNCT_CB_MTP_STOP_STORAGE_ONLY,
-	CY_FUNCT_CB_NODATA = 0x40000000U,
-	CY_FUNCT_CB_DATA =   0x20000000U
-} cy_as_funct_c_b_type;
-
-/* Summary
-   This type specifies the general West Bridge function callback.
-
-   Description
-   This callback is supplied as an argument to all asynchronous
-   functions in the API. It iS called after the asynchronous function
-   has completed.
-
-   See Also
-   CyAsFunctCBType
-*/
-typedef void (*cy_as_function_callback)(
-	cy_as_device_handle	handle,
-	cy_as_return_status_t	status,
-	uint32_t		client,
-	cy_as_funct_c_b_type	type,
-	void	*data);
-
-/* Summary
-   This type specifies the general West Bridge event that has
-   occurred.
-
-   Description
-   This type is used in the West Bridge misc callback function to
-   indicate the type of callback.
-
-   See Also
-*/
-typedef enum cy_as_misc_event_type {
-	/* This event is sent when West Bridge has finished
-	initialization and is ready to respond to API calls. */
-	cy_as_event_misc_initialized = 0,
-
-	/* This event is sent when West Bridge has left the
-	standby state and is ready to respond to commands again. */
-	cy_as_event_misc_awake,
-
-	/* This event is sent periodically from the firmware
-	to the processor. */
-	cy_as_event_misc_heart_beat,
-
-	/* This event is sent when the West Bridge has left the
-	suspend mode and is ready to respond to commands
-	again. */
-	cy_as_event_misc_wakeup,
-
-	 /* This event is sent when the firmware image downloaded
-	cannot run on the active west bridge device. */
-	cy_as_event_misc_device_mismatch
-} cy_as_misc_event_type;
-
-/* Summary
-   This type is the type of a callback function that is called when a
-   West Bridge misc event occurs.
-
-   Description
-   At times West Bridge needs to inform the P port processor of events
-   that have occurred. These events are asynchronous to the thread of
-   control on the P port processor and as such are generally delivered
-   via a callback function that is called as part of an interrupt
-   handler. This type defines the type of function that must be provided
-   as a callback function for West Bridge misc events.
-
-   See Also
-   * CyAsMiscEventType
-*/
-typedef void (*cy_as_misc_event_callback)(
-	/* Handle to the device to configure */
-	cy_as_device_handle		handle,
-	/* The event type being reported */
-	cy_as_misc_event_type		ev,
-	/* The data assocaited with the event being reported */
-	void *evdata
-);
-
-#ifndef __doxygen__
-/* Summary
-   This enum provides info of various firmware trace levels.
-
-   Description
-
-   See Also
-   * CyAsMiscSetTraceLevel
-*/
-enum {
-	CYAS_FW_TRACE_LOG_NONE = 0,	/* Log nothing. */
-	CYAS_FW_TRACE_LOG_STATE,	/* Log state information. */
-	CYAS_FW_TRACE_LOG_CALLS,	/* Log function calls. */
-	CYAS_FW_TRACE_LOG_STACK_TRACE,	/* Log function calls with args. */
-	CYAS_FW_TRACE_MAX_LEVEL		/* Max trace level sentinel. */
-};
-#endif
-
-/* Summary
-   This enum lists the controllable GPIOs of the West Bridge device.
-
-   Description
-   The West Bridge device has GPIOs that can be used for user defined functions.
-   This enumeration lists the GPIOs that are available on the device.
-
-   Notes
-   All of the GPIOs except UVALID can only be accessed when using West Bridge
-   firmware images that support only SD/MMC/MMC+ storage devices. This
-   functionality is not supported in firmware images that support NAND
-   storage.
-
-   See Also
-   * CyAsMiscGetGpioValue
-   * CyAsMiscSetGpioValue
- */
-typedef enum {
-	cy_as_misc_gpio_0 = 0,	/* GPIO[0] pin */
-	cy_as_misc_gpio_1, /* GPIO[1] pin */
-	cy_as_misc_gpio__nand_CE, /* NAND_CE pin, output only */
-	cy_as_misc_gpio__nand_CE2, /* NAND_CE2 pin, output only */
-	cy_as_misc_gpio__nand_WP, /* NAND_WP pin, output only */
-	cy_as_misc_gpio__nand_CLE, /* NAND_CLE pin, output only */
-	cy_as_misc_gpio__nand_ALE, /* NAND_ALE pin, output only */
-	/* SD_POW pin, output only, do not drive low while storage is active */
-	cy_as_misc_gpio_SD_POW,
-	cy_as_misc_gpio_U_valid				 /* UVALID pin */
-} cy_as_misc_gpio;
-
-/* Summary
-   This enum lists the set of clock frequencies that are supported for
-   working with low speed SD media.
-
-   Description
-   West Bridge firmware uses a clock frequency less than the maximum
-   possible rate for low speed SD media.  This can be changed to a
-   setting equal to the maximum frequency as desired by the user. This
-   enumeration lists the different frequency settings that are
-   supported.
-
-   See Also
-   * CyAsMiscSetLowSpeedSDFreq
- */
-typedef enum cy_as_low_speed_sd_freq {
-	/* Approx. 21.82 MHz, default value */
-	CY_AS_SD_DEFAULT_FREQ = 0,
-	/* 24 MHz */
-	CY_AS_SD_RATED_FREQ
-} cy_as_low_speed_sd_freq;
-
-/* Summary
-   This enum lists the set of clock frequencies that are supported
-   for working with high speed SD media.
-
-   Description
-   West Bridge firmware uses a 48 MHz clock by default to interface
-   with high speed SD/MMC media.  This can be changed to 24 MHz if
-   so desired by the user. This enum lists the different frequencies
-   that are supported.
-
-   See Also
-   * CyAsMiscSetHighSpeedSDFreq
- */
-typedef enum cy_as_high_speed_sd_freq {
-	CY_AS_HS_SD_FREQ_48, /* 48 MHz, default value */
-	CY_AS_HS_SD_FREQ_24	/* 24 MHz */
-} cy_as_high_speed_sd_freq;
-
-/* Summary
-   Struct encapsulating all information returned by the
-   CyAsMiscGetFirmwareVersion call.
-
-   Description
-   This struct encapsulates all return values from the asynchronous
-   CyAsMiscGetFirmwareVersion call, so that a single data argument
-   can be passed to the user provided callback function.
-
-   See Also
-   * CyAsMiscGetFirmwareVersion
- */
-typedef struct cy_as_get_firmware_version_data {
-	/* Return value for major version number for the firmware */
-	uint16_t	 major;
-	/* Return value for minor version number for the firmware */
-	uint16_t	 minor;
-	/* Return value for build version number for the firmware */
-	uint16_t	 build;
-	/* Return value for media types supported in the current firmware */
-	uint8_t	 media_type;
-	/* Return value to indicate the release or debug mode of firmware */
-	cy_bool	is_debug_mode;
-} cy_as_get_firmware_version_data;
-
-
-/*****************************
- * West Bridge Functions
- *****************************/
-
-/* Summary
-   This function creates a new West Bridge device and returns a
-   handle to the device.
-
-   Description
-   This function initializes the API object that represents the West
-   Bridge device and returns a handle to this device.  This handle is
-   required for all West Bridge related functions to identify the
-   specific West Bridge device.
-
-   * Valid In Asynchronous Callback: NO
-
-   Returns
-   * CY_AS_ERROR_SUCCESS
-   * CY_AS_ERROR_OUT_OF_MEMORY
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_create_device(
-	/* Return value for handle to created device */
-	cy_as_device_handle *handle_p,
-	/* The HAL specific tag for this device */
-	cy_as_hal_device_tag		tag
-	);
-
-/* Summary
-   This functions destroys a previously created West Bridge device.
-
-   Description
-   When an West Bridge device is created, an opaque handle is returned
-   that represents the device.  This function destroys that handle and
-   frees all resources associated with the handle.
-
-   * Valid In Asynchronous Callback: NO
-
-   Returns
-   * CY_AS_ERROR_SUCCESS
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_STILL_RUNNING - The USB or STORAGE stacks are still
-   *	running, they must be stopped before the device can be destroyed
-   * CY_AS_ERROR_DESTROY_SLEEP_CHANNEL_FAILED - the HAL layer failed to
-   *	destroy a sleep channel
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_destroy_device(
-	/* Handle to the device to destroy */
-	cy_as_device_handle		handle
-	);
-
-/* Summary
-   This function initializes the hardware for basic communication with
-   West Bridge.
-
-   Description
-   This function initializes the hardware to establish basic
-   communication with the West Bridge device.  This is always the first
-   function called to initialize communication with the West Bridge
-   device.
-
-   * Valid In Asynchronous Callback: NO
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the basic initialization was completed
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_IN_STANDBY
-   * CY_AS_ERROR_ALREADY_RUNNING
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_NO_ANTIOCH - cannot find the West Bridge device
-   * CY_AS_ERROR_CREATE_SLEEP_CHANNEL_FAILED -
-   *	the HAL layer falied to create a sleep channel
-
-   See Also
-   * CyAsDeviceConfig
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_configure_device(
-	/* Handle to the device to configure */
-	cy_as_device_handle		handle,
-	/* Configuration information */
-	cy_as_device_config		*config_p
-	);
-
-/* Summary
-   This function returns non-zero if West Bridge is in standby and
-   zero otherwise.
-
-   Description
-   West Bridge supports a standby mode.  This function is used to
-   query West Bridge to determine if West Bridge is in a standby
-   mode.
-
-   * Valid In Asynchronous Callback: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS
-   * CY_AS_ERROR_INVALID_HANDLE
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_in_standby(
-	/* Handle to the device to configure */
-	cy_as_device_handle		handle,
-	/* Return value for standby state */
-	cy_bool					*standby
-	);
-
-/* Summary
-   This function downloads the firmware to West Bridge device.
-
-   Description
-   This function downloads firmware from a given location and with a
-   given size to the West Bridge device.  After the firmware is
-   downloaded the West Bridge device is moved out of configuration
-   mode causing the firmware to be executed.  It is an error to call
-   this function when the device is not in configuration mode.  The
-   device is in configuration mode on power up and may be placed in
-   configuration mode after power up with a hard reset.
-
-   Notes
-   The firmware must be on a word align boundary.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the firmware was successfully downloaded
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	was not configured
-   * CY_AS_ERROR_NOT_IN_CONFIG_MODE
-   * CY_AS_ERROR_INVALID_SIZE - the size of the firmware
-   *	exceeded 32768 bytes
-   * CY_AS_ERROR_ALIGNMENT_ERROR
-   * CY_AS_ERROR_IN_STANDBY - trying to download
-   *	while in standby mode
-   * CY_AS_ERROR_TIMEOUT
-
-   See Also
-   * CyAsMiscReset
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_download_firmware(
-	/* Handle to the device to configure */
-	cy_as_device_handle	  handle,
-	/* Pointer to the firmware to be downloaded */
-	const void			   *fw_p,
-	/* The size of the firmware in bytes */
-	uint16_t			  size,
-	/* Callback to call when the operation is complete. */
-	cy_as_function_callback  cb,
-	/* Client data to be passed to the callback. */
-	uint32_t			  client
-	);
-
-
-/* Summary
-   This function returns the version number of the firmware running in
-   the West Bridge device.
-
-   Description
-   This function queries the West Bridge device and retreives the
-   firmware version number.  If the firmware is not loaded an error is
-   returned indicated no firmware has been loaded.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the firmware version number was retreived
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been downloaded
-   *	to the device
-   * CY_AS_ERROR_IN_STANDBY
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_TIMEOUT - there was a timeout waiting for a response
-   *	from the West Bridge firmware
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_get_firmware_version(
-	/* Handle to the device to configure */
-	cy_as_device_handle	handle,
-	/* Return values indicating the firmware version. */
-	cy_as_get_firmware_version_data	*data,
-	/* Callback to call when the operation is complete. */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback. */
-	uint32_t client
-	);
-
-#if !defined(__doxygen__)
-
-/* Summary
-   This function reads and returns the contents of an MCU accessible
-   register on the West Bridge.
-
-   Description
-   This function requests the firmware to read and return the contents
-   of an MCU accessible register through the mailboxes.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the register content was retrieved.
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED
-   * CY_AS_ERROR_NO_FIRMWARE
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_TIMEOUT - there was a timeout waiting for a response
-   *	from the West Bridge firmware
-   * CY_AS_ERROR_INVALID_RESPONSE - the firmware build does not
-   *	support this command.
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_read_m_c_u_register(
-	/* Handle to the device to configure */
-	cy_as_device_handle		handle,
-	/* Address of the register to read */
-	uint16_t			address,
-	/* Return value for the MCU register content */
-	uint8_t				*value,
-	/* Callback to call when the operation is complete. */
-	cy_as_function_callback		cb,
-	/* Client data to be passed to the callback. */
-	uint32_t			client
-	);
-
-/* Summary
-   This function writes to an MCU accessible register on the West Bridge.
-
-   Description
-   This function requests the firmware to write a specified value to an
-   MCU accessible register through the mailboxes.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Notes
-   This function is only for internal use by the West Bridge API layer.
-   Calling this function directly can cause device malfunction.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the register content was updated.
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED
-   * CY_AS_ERROR_NO_FIRMWARE
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_TIMEOUT - there was a timeout waiting for a response
-   *	from the West Bridge firmware
-   * CY_AS_ERROR_INVALID_RESPONSE - the firmware build does not support
-   * this command.
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_write_m_c_u_register(
-	/* Handle to the device to configure */
-	cy_as_device_handle	handle,
-	/* Address of the register to write */
-	uint16_t	address,
-	/* Mask to be applied on the register contents. */
-	uint8_t		mask,
-	/* Data to be ORed with the register contents. */
-	uint8_t		value,
-	/* Callback to call when the operation is complete. */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback. */
-	uint32_t	client
-	);
-
-#endif
-
-/* Summary
-   This function will reset the West Bridge device and software API.
-
-   Description
-   This function will reset the West Bridge device and software API.
-   The reset operation can be a hard reset or a soft reset.  A hard
-   reset will reset all aspects of the West Bridge device. The device
-   will enter the configuration state and the firmware will have to be
-   reloaded.  The device will also have to be re-initialized.  A soft
-   reset just resets the West Bridge micro-controller.
-
-   * Valid In Asynchronous Callback: NO
-
-   Notes
-   When a hard reset is issued, the firmware that may have been
-   previously loaded will be lost and any configuration information set
-   via CyAsMiscConfigureDevice() will be lost.  This will be reflected
-   in the API maintained state of the device.  In order to re-establish
-   communications with the West Bridge device, CyAsMiscConfigureDevice()
-   and CyAsMiscDownloadFirmware() must be called again.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the device has been reset
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED
-   * CY_AS_ERROR_NO_FIRMWARE
-   * CY_AS_ERROR_NOT_YET_SUPPORTED - current soft reset is not supported
-   * CY_AS_ERROR_ASYNC_PENDING - Reset is unable to flush pending async
-   *	reads/writes in polling mode.
-
-
-	  See Also
-   * CyAsMiscReset
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_reset(
-	/* Handle to the device to configure */
-	cy_as_device_handle handle,
-	/* The type of reset to perform */
-	cy_as_reset_type type,
-	/* If true, flush all pending writes to mass storage
-	 before performing the reset. */
-	cy_bool flush,
-	/* Callback to call when the operation is complete. */
-	cy_as_function_callback cb,
-	/* Client data to be passed to the callback. */
-	uint32_t client
-	);
-
-/* Summary
-   This function acquires a given resource.
-
-   Description
-   There are resources in the system that are shared between the
-   West Bridge device and the processor attached to the P port of
-   the West Bridge device.  This API provides a mechanism for the
-   P port processor to acquire ownership of a resource.
-
-   Notes
-   The ownership of the resources controlled by CyAsMiscAcquireResource()
-   and CyAsMiscReleaseResource() defaults to a known state at hardware
-   reset.  After the firmware is loaded and begins execution the state of
-   these resources may change.  At any point if the P Port processor needs
-   to acquire a resource it should do so explicitly to be sure of
-   ownership.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the p port successfully acquired the
-   * 	resource of interest
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED
-   * CY_AS_ERROR_NO_FIRMWARE
-   * CY_AS_ERROR_INVALID_RESOURCE
-   * CY_AS_ERROR_RESOURCE_ALREADY_OWNED - the p port already
-   *	owns this resource
-   * CY_AS_ERROR_NOT_ACQUIRED - the resource cannot be acquired
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_TIMEOUT - there was a timeout waiting for a
-   *	response from the West Bridge firmware
-
-   See Also
-   * CyAsResourceType
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_acquire_resource(
-	/* Handle to the device to configure */
-	cy_as_device_handle	handle,
-	/* The resource to acquire */
-	cy_as_resource_type	*resource,
-	/* If true, force West Bridge to release the resource */
-	cy_bool				force,
-	/* Callback to call when the operation is complete. */
-	cy_as_function_callback cb,
-	/* Client data to be passed to the callback. */
-	uint32_t			client
-	);
-
-/* Summary
-   This function releases a given resource.
-
-   Description
-   There are resources in the system that are shared between the
-   West Bridge device and the processor attached to the P port of
-   the West Bridge device.  This API provides a mechanism for the
-   P port processor to release a resource that has previously been
-   acquired via the CyAsMiscAcquireResource() call.
-
-   * Valid In Asynchronous Callback: NO
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the p port successfully released
-   *	the resource of interest
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED
-   * CY_AS_ERROR_NO_FIRMWARE
-   * CY_AS_ERROR_INVALID_RESOURCE
-   * CY_AS_ERROR_RESOURCE_NOT_OWNED - the p port does not own the
-   *	resource of interest
-
-   See Also
-   * CyAsResourceType
-   * CyAsMiscAcquireResource
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_release_resource(
-	/* Handle to the device to configure */
-	cy_as_device_handle		handle,
-	/* The resource to release */
-	cy_as_resource_type		resource
-	);
-
-#ifndef __doxygen__
-/* Summary
-   This function sets the trace level for the West Bridge firmware.
-
-   Description
-   The West Bridge firmware has the ability to store information
-   about the state and execution path of the firmware on a mass storage
-   device attached to the West Bridge device.  This function configures
-   the specific mass storage device to be used and the type of information
-   to be stored.  This state information is used for debugging purposes
-   and must be interpreted by a Cypress provided tool.
-
-   *Trace Level*
-   The trace level indicates the amount of information to output.
-   * 0 = no trace information is output
-   * 1 = state information is output
-   * 2 = function call information is output
-   * 3 = function call, arguments, and return value information is output
-
-   * Valid In Asynchronous Callback: NO
-
-   Notes
-   The media device and unit specified in this call will be overwritten
-   and any data currently stored on this device and unit will be lost.
-
-   * NOT IMPLEMENTED YET
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the trace configuration has been
-   *	successfully changed
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
-   *	pair does not exist
-   * CY_AS_ERROR_NO_SUCH_UNIT - the unit specified does not exist
-   * CY_AS_ERROR_INVALID_TRACE_LEVEL - the trace level requested
-   *	does not exist
-   * CY_AS_ERROR_TIMEOUT - there was a timeout waiting for a
-   *	response from the West Bridge firmware
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_set_trace_level(
-	/* Handle to the device to configure */
-	cy_as_device_handle	handle,
-	/* The trace level */
-	uint8_t	level,
-	/* The bus for the output */
-	cy_as_bus_number_t	bus,
-	/* The device for the output */
-	uint32_t device,
-	/* The unit for the output */
-	uint32_t unit,
-	/* Callback to call when the operation is complete. */
-	cy_as_function_callback		cb,
-	/* Client data to be passed to the callback. */
-	uint32_t			client
-	);
-#endif
-
-/* Summary
-   This function places West Bridge into the low power standby mode.
-
-   Description
-   This function places West Bridge into a low power (sleep) mode, and
-   cannot be called while the USB stack is active.  This function first
-   instructs the West Bridge firmware that the device is about to be
-   placed into sleep mode.  This allows West Bridge to complete any pending
-   storage operations.  After the West Bridge device has responded that
-   pending operations are complete, the device is placed in standby mode.
-
-   There are two methods of placing the device in standby mode.  If the
-   WAKEUP pin of the West Bridge is connected to a GPIO on the processor,
-   the pin is de-asserted (via the HAL layer) and West Bridge enters into
-   a sleep mode.  If the WAKEUP pin is not accessible, the processor can
-   write into the power management control/status register on the West
-   Bridge to put the device into sleep mode.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the function completed and West Bridge
-   *	is in sleep mode
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_ALREADY_STANDBY - the West Bridge device is already
-   *	in sleep mode
-   * CY_AS_ERROR_TIMEOUT - there was a timeout waiting for a response
-   *	from the West Bridge firmware
-   * CY_AS_ERROR_NOT_SUPPORTED - the HAL layer does not support changing
-   *	the WAKEUP pin
-   * CY_AS_ERROR_USB_RUNNING - The USB stack is still running when the
-   *	EnterStandby call is made
-   * CY_AS_ERROR_ASYNC_PENDING
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-   * CY_AS_ERROR_SETTING_WAKEUP_PIN
-   * CY_AS_ERROR_ASYNC_PENDING - In polling mode EnterStandby can not
-   *	be called until all pending storage read/write requests have
-   *	finished.
-
-   See Also
-   * CyAsMiscLeaveStandby
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_enter_standby_e_x_u(
-	/* Handle to the device to configure */
-	cy_as_device_handle		handle,
-	/* If true, use the wakeup pin, otherwise use the register */
-	cy_bool				pin,
-	/* Set true to enable specific usages of the
-	UVALID signal, please refer to AN xx or ERRATA xx */
-	cy_bool				uvalid_special,
-	/* Callback to call when the operation is complete. */
-	cy_as_function_callback		cb,
-	/* Client data to be passed to the callback. */
-	uint32_t			client
-	);
-
-/* Summary
-   This function is provided for backwards compatibility.
-
-   Description
-   Calling this function is the same as calling CyAsMiscEnterStandbyEx
-   with True for the lowpower parameter.
-
-   See Also
-   * CyAsMiscEnterStandbyEx
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_enter_standby(cy_as_device_handle handle,
-			cy_bool pin,
-			cy_as_function_callback cb,
-			uint32_t client
-			);
-
-/* Summary
-   This function brings West Bridge out of sleep mode.
-
-   Description
-   This function asserts the WAKEUP pin (via the HAL layer). This
-   brings the West Bridge out of the sleep state and allows the
-   West Bridge firmware to process the event causing the wakeup.
-   When all processing associated with the wakeup is complete, a
-   callback function is called to tell the P port software that
-   the firmware processing associated with wakeup is complete.
-
-   * Valid In Asynchronous Callback: NO
-
-   Returns:
-   * CY_AS_ERROR_SUCCESS - the function completed and West Bridge
-   *	is in sleep mode
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_SETTING_WAKEUP_PIN
-   * CY_AS_ERROR_NOT_IN_STANDBY - the West Bridge device is not in
-   *	the sleep state
-   * CY_AS_ERROR_TIMEOUT - there was a timeout waiting for a
-   *	response from the West Bridge firmware
-   * CY_AS_ERROR_NOT_SUPPORTED - the HAL layer does not support
-   *	changing the WAKEUP pin
-
-   See Also
-   * CyAsMiscEnterStandby
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_leave_standby(
-	/* Handle to the device to configure */
-	cy_as_device_handle		handle,
-	/* The resource causing the wakeup */
-	cy_as_resource_type		resource
-	);
-
-/* Summary
-   This function registers a callback function to be called when an
-   asynchronous West Bridge MISC event occurs.
-
-   Description
-   When asynchronous misc events occur, a callback function can be
-   called to alert the calling program.  This functions allows the
-   calling program to register a callback.
-
-   * Valid In Asynchronous Callback: NO
-
-   Returns:
-   * CY_AS_ERROR_SUCCESS
-   * CY_AS_ERROR_INVALID_HANDLE
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_register_callback(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The function to call */
-	cy_as_misc_event_callback		callback
-	);
-
-/* Summary
-   This function sets the logging level for log messages.
-
-   Description
-   The API can print messages via the CyAsHalPrintMessage capability.
-   This function sets the level of detail seen when printing messages
-   from the API.
-
-   * Valid In Asynchronous Callback:NO
-*/
-EXTERN void
-cy_as_misc_set_log_level(
-	/* Level to set, 0 is fewer messages, 255 is all */
-	uint8_t	level
-	);
-
-
-/* Summary
-   This function tells West Bridge that SD or MMC media has been
-   inserted or removed.
-
-   Description
-   In some hardware configurations, SD or MMC media detection is
-   handled outside of the West Bridge device.  This function is called
-   when a change is detected to inform the West Bridge firmware to check
-   for storage media changes.
-
-   * Valid In Asynchronous Callback: NO
-
-   Returns:
-   * CY_AS_ERROR_SUCCESS
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED
-   * CY_AS_ERROR_NO_FIRMWARE
-   * CY_AS_ERROR_IN_STANDBY
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-   See Also
-   * CyAsMiscStorageChanged
-
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_storage_changed(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* Callback to call when the operation is complete. */
-	cy_as_function_callback		cb,
-	/* Client data to be passed to the callback. */
-	uint32_t			client
-	);
-
-/* Summary
-   This function instructs the West Bridge firmware to start/stop
-   sending periodic heartbeat messages to the processor.
-
-   Description
-   The West Bridge firmware can send heartbeat messages through the
-   mailbox register once every 500 ms. This message can be an overhead
-   as it causes regular Mailbox interrupts to happen, and is turned
-   off by default. The message can be used to test and verify that the
-   West Bridge firmware is alive. This API can be used to enable or
-   disable the heartbeat message.
-
-   * Valid In Asynchronous Callback: NO
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the function completed successfully
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED
-   * CY_AS_ERROR_NO_FIRMWARE
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured yet
-   * CY_AS_ERROR_NO_FIRMWARE - firmware has not been downloaded to
-   *	the West Bridge device
-
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_heart_beat_control(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	handle,
-	/* Message enable/disable selection */
-	cy_bool	enable,
-	 /* Callback to call when the operation is complete. */
-	cy_as_function_callback		cb,
-	/* Client data to be passed to the callback. */
-	uint32_t			client
-		);
-
-/* Summary
-   This function gets the current state of a GPIO pin on the
-   West Bridge device.
-
-   Description
-   The West Bridge device has GPIO pins that can be used for user
-   defined functions. This function gets the current state of the
-   specified GPIO pin. Calling this function will configure the
-   corresponding pin as an input.
-
-   * Valid In Asynchronous Callback: NO
-
-   Notes
-   Only GPIO[0], GPIO[1] and UVALID pins can be used as GP inputs.
-   Of these pins, only the UVALID pin is supported by firmware images
-   that include NAND storage support.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the function completed successfully
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured yet
-   * CY_AS_ERROR_NO_FIRMWARE - firmware has not been downloaded
-   *	to the West Bridge device
-   * CY_AS_ERROR_BAD_INDEX - an invalid GPIO was specified
-   * CY_AS_ERROR_NOT_SUPPORTED - this feature is not supported
-   *	by the firmware
-
-   See Also
-   * CyAsMiscGpio
-   * CyAsMiscSetGpioValue
- */
-EXTERN cy_as_return_status_t
-cy_as_misc_get_gpio_value(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	handle,
-	/* Id of the GPIO pin to query */
-	cy_as_misc_gpio	pin,
-	/* Current value of the GPIO pin */
-	uint8_t	*value,
-	/* Callback to call when the operation is complete. */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback. */
-	uint32_t client
-	);
-
-/* Summary
-   This function updates the state of a GPIO pin on the West
-   Bridge device.
-
-   Description
-   The West Bridge device has GPIO pins that can be used for
-   user defined functions. This function updates the output
-   value driven on a specified GPIO pin. Calling this function
-   will configure the corresponding pin as an output.
-
-   * Valid In Asynchronous Callback: NO
-
-   Notes
-   All of the pins listed under CyAsMiscGpio can be used as GP
-   outputs. This feature is note supported by firmware images
-   that include NAND storage device support.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the function completed successfully
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured yet
-   * CY_AS_ERROR_NO_FIRMWARE - firmware has not been downloaded
-   *	to the West Bridge device
-   * CY_AS_ERROR_BAD_INDEX - an invalid GPIO was specified
-   * CY_AS_ERROR_NOT_SUPPORTED - this feature is not supported
-   *	by firmware.
-
-   See Also
-   * CyAsMiscGpio
-   * CyAsMiscGetGpioValue
- */
-EXTERN cy_as_return_status_t
-cy_as_misc_set_gpio_value(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	handle,
-	/* Id of the GPIO pin to set */
-	cy_as_misc_gpio	pin,
-	/* Value to be set on the GPIO pin */
-	uint8_t	 value,
-	/* Callback to call when the operation is complete. */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback. */
-	uint32_t client
-	);
-
-/* Summary
-   Set the West Bridge device in the low power suspend mode.
-
-   Description
-   The West Bridge device has a low power suspend mode where the USB
-   core and the internal microcontroller are powered down. This
-   function sets the West Bridge device into this low power mode.
-   This mode can only be entered when there is no active USB
-   connection; i.e., when USB has not been connected or is suspended;
-   and there are no pending USB or storage asynchronous calls. The
-   device will exit the suspend mode and resume handling USB and
-   processor requests when any activity is detected on the CE#, D+/D-
-   or GPIO[0] lines.
-
-   * Valid In Asynchronous Callback: NO
-
-   Notes
-   The GPIO[0] pin needs to be configured as an input for the gpio
-   wakeup to work. This flag should not be enabled if the pin is
-   being used as a GP output.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the device was placed in suspend mode.
-   * CY_AS_ERROR_INVALID_HANDLE - the West Bridge handle passed
-   *	in is invalid.
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	yet been configured.
-   * CY_AS_ERROR_NO_FIRMWARE - no firmware has been downloaded
-   *	to the device.
-   * CY_AS_ERROR_IN_STANDBY - the device is already in sleep mode.
-   * CY_AS_ERROR_USB_CONNECTED - the USB connection is active.
-   * CY_AS_ERROR_ASYNC_PENDING - asynchronous storage/USB calls
-   *	are pending.
-   * CY_AS_ERROR_OUT_OF_MEMORY - failed to allocate memory for
-   *	the operation.
-   * CY_AS_ERROR_INVALID_RESPONSE - command not recognised by
-   *	firmware.
-
-   See Also
-   * CyAsMiscLeaveSuspend
- */
-EXTERN cy_as_return_status_t
-cy_as_misc_enter_suspend(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	handle,
-	/* Control the USB wakeup source */
-	cy_bool	usb_wakeup_en,
-	/* Control the GPIO[0] wakeup source */
-	cy_bool gpio_wakeup_en,
-	/* Callback to call when suspend mode entry is complete */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback. */
-	uint32_t client
-	);
-
-/* Summary
-   Wake up the West Bridge device from suspend mode.
-
-   Description
-   This call wakes up the West Bridge device from suspend mode,
-   and makes it ready for accepting other commands from the API.
-   A CyAsEventMiscWakeup event will be delivered to the callback
-   registered with CyAsMiscRegisterCallback to indicate that the
-   wake up is complete.
-
-   The CyAsEventMiscWakeup event will also be delivered if the
-   wakeup happens due to USB or GPIO activity.
-
-   * Valid In Asynchronous Callback: NO
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the device was woken up from
-   *	suspend mode.
-   * CY_AS_ERROR_INVALID_HANDLE - invalid device handle
-   *	passed in.
-   * CY_AS_ERROR_NOT_CONFIGURED - West Bridge device has
-   *	not been configured.
-   * CY_AS_ERROR_NO_FIRMWARE - firmware has not been
-   *	downloaded to the device.
-   * CY_AS_ERROR_NOT_IN_SUSPEND - the device is not in
-   *	suspend mode.
-   * CY_AS_ERROR_OUT_OF_MEMORY - failed to allocate memory
-   *	for the operation.
-   * CY_AS_ERROR_TIMEOUT - failed to wake up the device.
-
-   See Also
-   * CyAsMiscEnterSuspend
- */
-EXTERN cy_as_return_status_t
-cy_as_misc_leave_suspend(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	handle,
-	/* Callback to call when device has resumed operation. */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback. */
-	uint32_t client
-	);
-
-/* Summary
-   Reserve first numzones zones of nand device for storing
-   processor boot image. LNA firmware works  on the first
-   numzones zones of nand to enable the processor to boot.
-
-   Description
-   This function reserves first numzones zones of nand device
-   for storing processor boot image. This fonction MUST be
-   completed before starting the storage stack for the setting
-   to be taken into account.
-
-   * Valid In Asynchronous Callback: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS- zones are reserved.
-
-*/
-EXTERN cy_as_return_status_t
-cy_as_misc_reserve_l_n_a_boot_area(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	 handle,
-	/* number of nand zones to reserve */
-	uint8_t numzones,
-	/* Callback to call when device has resumed operation. */
-	cy_as_function_callback cb,
-	/* Client data to be passed to the callback. */
-	uint32_t client
-	);
-
-/* Summary
-   Select the clock frequency to be used when talking to low
-   speed (non-high speed) SD media.
-
-   Description
-   West Bridge firmware uses a clock frequency less than the
-   maximum possible rate for low speed SD media.  This function
-   selects the frequency setting from between the default speed
-   and the maximum speed. This fonction MUST be completed before
-   starting the storage stack for the setting to be taken into
-   account.
-
-   * Valid in Asynchronous Callback: Yes (if cb is non-zero)
-   * Nestable: Yes
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the operation completed successfully.
-   * CY_AS_ERROR_INVALID_HANDLE - invalid device handle passed in.
-   * CY_AS_ERROR_NOT_CONFIGURED - West Bridge device has not been
-   *	configured.
-   * CY_AS_ERROR_NO_FIRMWARE - firmware has not been downloaded
-   *	to the device.
-   * CY_AS_ERROR_OUT_OF_MEMORY - failed to allocate memory for
-   *	the operation.
-   * CY_AS_ERROR_IN_SUSPEND - West Bridge is in low power suspend
-   *	mode.
-   * CY_AS_ERROR_INVALID_PARAMETER - invalid frequency setting
-   *	desired.
-   * CY_AS_ERROR_TIMEOUT - West Bridge device did not respond to
-   *	the operation.
-   * CY_AS_ERROR_INVALID_RESPONSE - active firmware does not support
-   *	the operation.
-
-   See Also
-   * CyAsLowSpeedSDFreq
- */
-EXTERN cy_as_return_status_t
-cy_as_misc_set_low_speed_sd_freq(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	handle,
-	/* Frequency setting desired for low speed SD cards */
-	cy_as_low_speed_sd_freq	setting,
-	/* Callback to call on completion */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback */
-	uint32_t	client
-	);
-
-/* Summary
-   Select the clock frequency to be used when talking to high speed
-   SD/MMC media.
-
-   Description
-   West Bridge firmware uses a 48 MHz clock to interface with high
-   speed SD/MMC media.  This clock rate can be restricted to 24 MHz
-   if desired.  This function selects the frequency setting to be
-   used. This fonction MUST be completed before starting the storage
-   stack for the setting to be taken into account.
-
-   * Valid in Asynchronous Callback: Yes (if cb is non-zero)
-   * Nestable: Yes
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the operation completed successfully.
-   * CY_AS_ERROR_INVALID_HANDLE - invalid device handle passed in.
-   * CY_AS_ERROR_NOT_CONFIGURED - West Bridge device has not been
-   *	configured.
-   * CY_AS_ERROR_NO_FIRMWARE - firmware has not been downloaded to
-   *	the device.
-   * CY_AS_ERROR_OUT_OF_MEMORY - failed to allocate memory for the
-   *	operation.
-   * CY_AS_ERROR_IN_SUSPEND - West Bridge is in low power suspend mode.
-   * CY_AS_ERROR_INVALID_PARAMETER - invalid frequency setting desired.
-   * CY_AS_ERROR_TIMEOUT - West Bridge device did not respond to the
-   *	operation.
-   * CY_AS_ERROR_INVALID_RESPONSE - active firmware does not support
-   *	the operation.
-
-   See Also
-   * CyAsLowSpeedSDFreq
- */
-EXTERN cy_as_return_status_t
-cy_as_misc_set_high_speed_sd_freq(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	handle,
-	/* Frequency setting desired for high speed SD cards */
-	cy_as_high_speed_sd_freq setting,
-	/* Callback to call on completion */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback */
-	uint32_t client
-	);
-/* Summary
-   Select the polarity of the SD_POW output driven by West Bridge.
-
-   Description
-   The SD_POW signal driven by West Bridge can be used to control
-   the supply of Vcc to the SD/MMC media connected to the device.
-   This signal is driven as an active high signal by default. This
-   function can be used to change the polarity of this signal if
-   required. This fonction MUST be completed before starting the
-   storage stack for the setting to be taken into account.
-
-   * Valid in Asynchronous Callback: Yes (if cb is non-zero)
-   * Nestable: Yes
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the operation completed successfully.
-   * CY_AS_ERROR_INVALID_HANDLE - invalid device handle passed in.
-   * CY_AS_ERROR_NOT_CONFIGURED - West Bridge device has not been
-   *	configured.
-   * CY_AS_ERROR_NO_FIRMWARE - firmware has not been downloaded
-   *	to the device.
-   * CY_AS_ERROR_OUT_OF_MEMORY - failed to allocate memory for
-   *	the operation.
-   * CY_AS_ERROR_IN_SUSPEND - West Bridge is in low power
-   *	suspend mode.
-   * CY_AS_ERROR_INVALID_PARAMETER - invalid frequency setting
-   *	desired.
-   * CY_AS_ERROR_TIMEOUT - West Bridge device did not respond to
-   *	the operation.
-   * CY_AS_ERROR_INVALID_RESPONSE - active firmware does not
-   *	support the operation.
-
-   See Also
-   * CyAsMiscSignalPolarity
- */
-EXTERN cy_as_return_status_t
-cy_as_misc_set_sd_power_polarity(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle handle,
-	/* Desired polarity setting to the SD_POW signal. */
-	cy_as_misc_signal_polarity polarity,
-	/* Callback to call on completion. */
-	cy_as_function_callback cb,
-	/* Client data to be passed to the callback. */
-	uint32_t client
-	);
-
-/* For supporting deprecated functions */
-#include "cyasmisc_dep.h"
-
-#include "cyas_cplus_end.h"
-
-#endif				/* _INCLUDED_CYASMISC_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc_dep.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc_dep.h
deleted file mode 100644
index 8b258efc0182..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc_dep.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* Cypress West Bridge API header file (cyasmisc_dep.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-/* This header will contain Antioch specific declaration
- * of the APIs that are deprecated in Astoria SDK. This is
- * for maintaining backward compatibility with prior releases
- * of the Antioch SDK.
- */
-#ifndef __INCLUDED_CYASMISC_DEP_H__
-#define __INCLUDED_CYASMISC_DEP_H__
-
-#ifndef __doxygen__
-
-EXTERN cy_as_return_status_t
-cy_as_misc_acquire_resource_dep(cy_as_device_handle handle,
-		cy_as_resource_type resource,
-		cy_bool force);
-EXTERN cy_as_return_status_t
-cy_as_misc_get_firmware_version_dep(cy_as_device_handle handle,
-		uint16_t *major,
-		uint16_t *minor,
-		uint16_t *build,
-		uint8_t *media_type,
-		cy_bool *is_debug_mode);
-EXTERN cy_as_return_status_t
-cy_as_misc_set_trace_level_dep(cy_as_device_handle handle,
-		uint8_t level,
-		cy_as_media_type media,
-		uint32_t device,
-		uint32_t unit,
-		cy_as_function_callback cb,
-		uint32_t client);
-#endif /*__doxygen*/
-
-#endif /*__INCLUDED_CYANSTORAGE_DEP_H__*/
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmtp.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmtp.h
deleted file mode 100644
index 05d344969776..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmtp.h
+++ /dev/null
@@ -1,646 +0,0 @@
-/* Cypress West Bridge API header file (cyasmtp.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASMTP_H_
-#define _INCLUDED_CYASMTP_H_
-
-#include "cyasmisc.h"
-
-#include "cyas_cplus_start.h"
-
-/*@@Media Transfer Protocol (MTP) Overview
-  Summary
-  The MTP API has been designed to allow MTP enabled West Bridge
-  devices to implement the MTP protocol while maintaining high
-  performance. West Bridge has the capability to enter into a
-  Turbo mode during a MTP SendObject or GetObject operation
-  enabling it to directly stream the data into or out of the
-  attached SD card with minimal involvement from the Processor.
-
-  Description
-  The MTP API is designed to act as a pass through implementation
-  of the MTP protocol for all operations. Each MTP transaction
-  received from the Host is passed through West Bridge and along
-  to the Processor. The Processor can then respond to the
-  transaction and pass data and/or responses back to the Host
-  through West Bridge.
-
-  The MTP API also allows for a high speed handling of MTP
-  SendObject and GetObject operations, referred to as Turbo MTP.
-  During a Turbo MTP operation West Bridge is responsible for
-  reading or writing the data for the MTP operation directly from
-  or to the SD card with minimal interaction from the Processor.
-  The is done by having the Processor transfer a Block Table
-  to West Bridge which contains the locations on the SD card that
-  need to be read or written. During the handling of a Turbo
-  Operation the Processor will then only periodically need to
-  send a new Block Table to West Bridge when the first is used up.
-  See the CyAsMTPInitSendObject and CyAsMTPInitGetObject functions
-  for more details.
-
-  In order to enable the MTP API you must first have a MTP enabled
-  West Bridge loaded with MTP firmware. You then must start the USB
-  and Storage APIs before starting the MTP API. See CyAsMTPStart
-  for more details.
-*/
-
-/*@@Endpoints
-  Summary
-  When using MTP firmware endpoints 2 and 6 are dedicated
-  to bulk MTP traffic and endpoint 1 is available for MTP
-  events.
-
-  Description
-  When using a MTP enabled West Brdige device endpoints 2 and
-  6 are made available for use to implement the MTP protocol.
-  These endpoints have a few special restrictions noted below
-  but otherwise the existing USB APIs can be used normally with
-  these endpoints.
-
-  1. CyAsUsbSetNak, CyAsUsbClearNak, and CyAsUsbGetNak are
-	disabled for these endpoints
-  2. During a turbo operation CyAsUsbSetStall, CyAsUsbClearStall,
-	and CyAsUsbGetStall are disabled.
-
-*/
-
-
-/* Summary
-   This constants defines the maximum number of
-   entries in the Block Table used to describe
-   the locations for Send/GetObject operations.
-
-   See Also
-   * CyAsMtpSendObject
-   * CyAsMtpGetObject
-*/
-#define CY_AS_MAX_BLOCK_TABLE_ENTRIES 64
-
-/* Summary
-   Endpoint to be used for MTP reads from the USB host.
- */
-#define CY_AS_MTP_READ_ENDPOINT		 (2)
-
-/* Summary
-   Endpoint to be used fro MTP writes to the USB host.
- */
-#define CY_AS_MTP_WRITE_ENDPOINT		(6)
-
-/******************************************
- * MTP Types
- ******************************************/
-
-/* Summary
-   The BlockTable used for turbo operations.
-
-   Description
-   This struct is used to specify the blocks
-   to be used for both read/write and send/getObject
-   operations.
-
-   The start block is a starting Logical Block Address
-   and num block is the number of blocks in that contiguous
-   region.
-
-   start_blocks[i]->[-------] <- start_blocks[i] + num_blocks[i]
-
-   If you need fewer than CY_AS_MAX_BLOCK_TABLE_ENTRIES
-   the remainder should be left empty. Empty is defined
-   as num_blocks equal to 0.
-
-   See Also
-   * CyAsMTPInitSendObject
-   * CyAsMTPInitGetObject
-
-*/
-typedef struct cy_as_mtp_block_table {
-	uint32_t start_blocks[CY_AS_MAX_BLOCK_TABLE_ENTRIES];
-	uint16_t num_blocks[CY_AS_MAX_BLOCK_TABLE_ENTRIES];
-} cy_as_mtp_block_table;
-
-/* Summary
-   This type specifies the type of MTP event that has occurred.
-
-   Description
-   MTP events are used to communicate that West Bridge has
-   either finished the handling of the given operation, or
-   that it requires additional data to complete the operation.
-
-   In no case does West Bridge send any MTP protocol responses,
-   this always remain the responsibility of the client.
-
-   See Also
-   * CyAsMTPInitSendObject
-   * CyAsMTPInitGetObject
-   * CyAsMTPSendBlockTable
-
-*/
-typedef enum cy_as_mtp_event {
-	/* This event is sent when West Bridge
-	has finished writing the data from a
-	send_object. west bridge will -not- send
-	the MTP response. */
-	cy_as_mtp_send_object_complete,
-
-	/* This event is sent when West Bridge
-	has finished sending the data for a
-	get_object operation. west bridge will
-	-not- send the MTP response. */
-	cy_as_mtp_get_object_complete,
-
-	/* This event is called when West Bridge
-	needs a new block_table. this is only a
-	notification, to transfer a block_table
-	to west bridge the cy_as_mtp_send_block_table
-	use the function. while west bridge is waiting
-	for a block_table during a send_object it
-	may need to NAK the endpoint. it is important
-	that the cy_as_mtp_send_block_table call is made
-	in a timely manner as eventually a delay
-	will result in an USB reset. this event has
-	no data */
-	cy_as_mtp_block_table_needed
-} cy_as_mtp_event;
-
-/* Summary
-   Data for the CyAsMTPSendObjectComplete event.
-
-   Description
-   Notification that a SendObject operation has been
-   completed. The status of the operation is given
-   (to distinguish between a cancelled and a success
-   for example) as well as the block count. The blocks
-   are used in order based on the current block table.
-   If more than one block table was used for a given
-   SendObject the count will include the total number
-   of blocks written.
-
-   This callback will be made only once per SendObject
-   operation and it will only be called after all of
-   the data has been committed to the SD card.
-
-   See Also
-   * CyAsMTPEvent
-
- */
-typedef struct cy_as_mtp_send_object_complete_data {
-	cy_as_return_status_t status;
-	uint32_t byte_count;
-	uint32_t transaction_id;
-} cy_as_mtp_send_object_complete_data;
-
-/*  Summary
-	Data for the CyAsMTPGetObjectComplete event.
-
-	Description
-	Notification that a GetObject has finished. This
-	event allows the P side to know when to send the MTP
-	response for the GetObject operation.
-
-	See Also
-	* CyAsMTPEvent
-
-*/
-typedef struct cy_as_mtp_get_object_complete_data {
-	cy_as_return_status_t status;
-	uint32_t byte_count;
-} cy_as_mtp_get_object_complete_data;
-
-/*  Summary
-	MTP Event callback.
-
-	Description
-	Callback used to communicate that a SendObject
-	operation has finished.
-
-	See Also
-	* CyAsMTPEvent
-*/
-typedef void (*cy_as_mtp_event_callback)(
-	cy_as_device_handle handle,
-	cy_as_mtp_event evtype,
-	void *evdata
-	);
-
-/* Summary
-   This is the callback function called after asynchronous API
-   functions have completed.
-
-   Description
-   When calling API functions from callback routines (interrupt
-   handlers usually) the async version of these functions must
-   be used. This callback is called when an asynchronous API
-   function has completed.
-*/
-typedef void (*cy_as_mtp_function_callback)(
-	/* Handle to the device to configure */
-	cy_as_device_handle	handle,
-	/* The error status of the operation */
-	cy_as_return_status_t	status,
-	/* A client supplied 32 bit tag */
-	uint32_t client
-);
-
-/**************************************
- * MTP Functions
- **************************************/
-
-/* Summary
-   This function starts the MTP stack.
-
-   Description
-   Initializes West Bridge for MTP activity and registers the MTP
-   event callback.
-
-   Before calling CyAsMTPStart, CyAsUsbStart and CyAsStorageStart must be
-   called (in either order).
-
-   MTPStart must be called before the device is enumerated. Please
-   see the documentation for CyAsUsbSetEnumConfig and CyAsUsbEnumControl
-   for details on enumerating a device for MTP.
-
-   Calling MTPStart will not affect any ongoing P<->S traffic.
-
-   This requires a MTP firmware image to be loaded on West Bridge.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED
-   * CY_AS_ERROR_NO_FIRMWARE
-   * CY_AS_ERROR_IN_SUSPEND
-   * CY_AS_ERROR_INVALID_IN_CALLBACK
-   * CY_AS_ERROR_STARTSTOP_PENDING
-   * CY_AS_ERROR_NOT_RUNNING - CyAsUsbStart or CyAsStorageStart
-   *	have not been called
-   * CY_AS_ERROR_NOT_SUPPORTED - West Bridge is not running
-   *	firmware with MTP support
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-
-   See Also
-   * CyAsMTPStop
-   * CyAsUsbStart
-   * CyAsStorageStart
-   * CyAsUsbSetEnumConfig
-   * CyAsUsbEnumControl
-*/
-cy_as_return_status_t
-cy_as_mtp_start(
-	cy_as_device_handle handle,
-	cy_as_mtp_event_callback event_c_b,
-	cy_as_function_callback cb,
-	uint32_t client
-	);
-
-
-/*  Summary
-	This function stops the MTP stack.
-
-	Description
-	Stops all MTP activity. Any ongoing transfers are
-	canceled.
-
-	This will not cause a UsbDisconnect but all
-	MTP activity (both pass through and turbo) will
-	stop.
-
-	Returns
-   * CY_AS_ERROR_SUCCESS
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED
-   * CY_AS_ERROR_NO_FIRMWARE
-   * CY_AS_ERROR_NOT_RUNNING
-   * CY_AS_ERROR_IN_SUSPEND
-   * CY_AS_ERROR_INVALID_IN_CALLBACK
-   * CY_AS_ERROR_STARTSTOP_PENDING
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-
-	See Also
-	* CyAsMTPStart
-*/
-cy_as_return_status_t
-cy_as_mtp_stop(
-	cy_as_device_handle handle,
-	cy_as_function_callback cb,
-	uint32_t client
-	);
-
-/*  Summary
-	This function sets up a Turbo SendObject operation.
-
-	Description
-	Calling this function will setup West Bridge to
-	enable Tubo handling of the next SendObject
-	operation received. This will pass down the initial
-	block table to the firmware and setup a direct u->s
-	write for the SendObject operation.
-
-	If this function is not called before a SendObject
-	operation is seen  the SendObject operation and data
-	will be passed along to the P port like any other MTP
-	command. It would then be the responsibility of the
-	client to perform a normal StorageWrite call to
-	store the data on the SD card. N.B. This will be
-	very slow compared with the Turbo handling.
-
-	The completion of this function only signals that
-	West Bridge has been set up to receive the next SendObject
-	operation. When the SendObject operation has been fully
-	handled and the data written to the SD card a separate
-	event will be triggered.
-
-	Returns
-	* CY_AS_ERROR_SUCCESS
-	* CY_AS_ERROR_INVALID_HANDLE
-	* CY_AS_ERROR_NOT_CONFIGURED
-	* CY_AS_ERROR_NO_FIRMWARE
-	* CY_AS_ERROR_IN_SUSPEND
-	* CY_AS_ERROR_NOT_RUNNING
-	* CY_AS_ERROR_OUT_OF_MEMORY
-	* CY_AS_ERROR_ASYNC_PENDING
-	* CY_AS_ERROR_INVALID_RESPONSE
-	* CY_AS_ERROR_NOT_SUPPORTED - West Bridge is not running
-	*	firmware with MTP support
-
-	See Also
-	* CyAsMTPCancelSendObject
-	* CyAsMTPInitGetObject
-	* CyAsMTPEvent
-	* CyAsMTPSendBlockTable
-*/
-cy_as_return_status_t
-cy_as_mtp_init_send_object(
-	cy_as_device_handle handle,
-	cy_as_mtp_block_table *blk_table,
-	uint32_t num_bytes,
-	cy_as_function_callback cb,
-	uint32_t client
-	);
-
-/* Summary
-   This function cancels an ongoing MTP operation.
-
-   Description
-   Causes West Bridge to cancel an ongoing SendObject
-   operation. Note this is only a cancel to West Bridge,
-   the MTP operation still needs to be canceled by
-   sending a response.
-
-   West Bridge will automatically set a Stall on the endpoint
-   when the cancel is received.
-
-   This function is only valid after CyAsMTPInitSendObject
-   has been called, but before the CyAsMTPSendObjectComplete
-   event has been sent.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_RUNNING
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-   * CY_AS_ERROR_NOT_SUPPORTED - West Bridge is not running
-   *	firmware with MTP support
-   * CY_AS_ERROR_NO_OPERATION_PENDING
-
-   See Also
-   * CyAsMTPInitSendObject
-*/
-cy_as_return_status_t
-cy_as_mtp_cancel_send_object(
-	cy_as_device_handle handle,
-	cy_as_function_callback cb,
-	uint32_t client
-	);
-
-/* Summary
-   This function sets up a turbo GetObject operation.
-
-   Description
-   Called by the P in response to a GetObject
-   operation. This provides West Bridge with the block
-   addresses for the Object data that needs to be
-   transferred.
-
-   It is the responsibility of the Processor to send the MTP
-   operation before calling CyAsMTPInitGetObject. West Bridge
-   will then send the data phase of the transaction,
-   automatically creating the required container for Data.
-   Once all of the Data has been transferred a callback will
-   be issued to inform the Processor that the Data phase has
-   completed allowing it to send the required MTP response.
-
-   If an entire Block Table is used then after the
-   last block is transferred the CyAsMTPBtCallback
-   will be called to allow an additional Block Table(s)
-   to be specified.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED
-   * CY_AS_ERROR_NO_FIRMWARE
-   * CY_AS_ERROR_NOT_RUNNING
-   * CY_AS_ERROR_IN_SUSPEND
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_ASYNC_PENDING
-   * CY_AS_ERROR_INVALID_RESPONSE
-   * CY_AS_ERROR_NOT_SUPPORTED - West Bridge is not running
-   *	firmware with MTP support
-
-   See Also
-   * CyAsMTPInitSendObject
-   * CyAsMTPCancelGetObject
-   * CyAsMTPEvent
-   * CyAsMTPSendBlockTable
-*/
-cy_as_return_status_t
-cy_as_mtp_init_get_object(
-	cy_as_device_handle handle,
-	cy_as_mtp_block_table *table_p,
-	uint32_t num_bytes,
-	uint32_t transaction_id,
-	cy_as_function_callback cb,
-	uint32_t client
-	);
-
-/* Summary
-   This function cancels an ongoing turbo GetObject
-   operation.
-
-   Description
-   Causes West Bridge to cancel an ongoing GetObject
-   operation. Note this is only a cancel to West Bridge,
-   the MTP operation still needs to be canceled by
-   sending a response.
-
-   This function is only valid after CyAsMTPGetSendObject
-   has been called, but before the CyAsMTPGetObjectComplete
-   event has been sent.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_RUNNING
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-   * CY_AS_ERROR_NOT_SUPPORTED - West Bridge is not running
-   *	firmware with MTP support
-   * CY_AS_ERROR_NO_OPERATION_PENDING
-
-   See Also
-   * CyAsMTPInitGetObject
-*/
-cy_as_return_status_t
-cy_as_mtp_cancel_get_object(
-	cy_as_device_handle handle,
-	cy_as_function_callback cb,
-	uint32_t client
-	);
-
-/* Summary
-   This function is used to transfer a BlockTable as part of
-   an ongoing MTP operation.
-
-   Description
-   This function is called in response to the
-   CyAsMTPBlockTableNeeded event. This allows the client to
-   pass in a BlockTable structure to West Bridge.
-
-   The memory associated with the table will be copied and
-   can be safely disposed of when the function returns if
-   called synchronously, or when the callback is made if
-   called asynchronously.
-
-   This function is used for both SendObject and GetObject
-   as both can generate the CyAsMTPBlockTableNeeded event.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_NOT_CONFIGURED
-   * CY_AS_ERROR_NO_FIRMWARE
-   * CY_AS_ERROR_NOT_RUNNING
-   * CY_AS_ERROR_IN_SUSPEND
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_ASYNC_PENDING
-   * CY_AS_ERROR_INVALID_RESPONSE
-   * CY_AS_ERROR_NOT_SUPPORTED - West Bridge is not running
-   *	firmware with MTP support
-
-   See Also
-   * CyAsMTPInitSendObject
-   * CyAsMTPInitGetObject
-*/
-cy_as_return_status_t
-cy_as_mtp_send_block_table(
-	cy_as_device_handle handle,
-	cy_as_mtp_block_table *table,
-	cy_as_function_callback cb,
-	uint32_t client
-	);
-
-/* Summary
-   This function is used to mark the start of a storage
-   read/write burst from the P port processor.
-
-   Description
-   This function is used to mark the start of a storage
-   read/write burst from the processor. All USB host access
-   into the mass storage / MTP endpoints will be blocked
-   while the read/write burst is ongoing, and will be allowed
-   to resume only after CyAsMTPStorageOnlyStop is called.
-   The burst mode is used to reduce the firmware overhead
-   due to configuring the internal data paths repeatedly,
-   and can help improve performance when a sequence of
-   read/writes is performed in a burst.
-
-   This function will not generate a special mailbox request,
-   it will only set a flag on the next Storage Read/Write
-   operation. Until such a call is made West Bridge will
-   continue to accept incoming packets from the Host.
-
-   * Valid in Asynchronous Callback: YES
-
-   Returns
-   * CY_AS_ERROR_INVALID_HANDLE - Invalid West Bridge device
-   *	handle was passed in.
-   * CY_AS_ERROR_NOT_CONFIGURED - West Bridge device has not
-   *	been configured.
-   * CY_AS_ERROR_NO_FIRMWARE - Firmware is not active on West
-   *	Bridge device.
-   * CY_AS_ERROR_NOT_RUNNING - Storage stack is not running.
-   * CY_AS_ERROR_SUCCESS - Burst mode has been started.
-
-   See Also
-   * CyAsStorageReadWriteBurstStop
- */
-cy_as_return_status_t
-cy_as_mtp_storage_only_start(
-	/* Handle to the West Bridge device. */
-	cy_as_device_handle handle
-	);
-
-/* Summary
-   This function is used to mark the end of a storage read/write
-   burst from the P port processor.
-
-   Description
-   This function is used to mark the end of a storage read/write
-   burst from the processor.  At this point, USB access to the
-   mass storage / MTP endpoints on the West Bridge device will be
-   re-enabled.
-
-   * Valid in Asynchronous Callback: NO
-
-   Returns
-   * CY_AS_ERROR_INVALID_HANDLE - Invalid West Bridge device handle
-   *	was passed in.
-   * CY_AS_ERROR_NOT_CONFIGURED - West Bridge device has not been
-   *	configured.
-   * CY_AS_ERROR_NO_FIRMWARE - Firmware is not active on West Bridge
-   *	device.
-   * CY_AS_ERROR_NOT_RUNNING - Storage stack is not running.
-   * CY_AS_ERROR_INVALID_IN_CALLBACK - This API cannot be called
-   *	from a callback.
-   * CY_AS_ERROR_OUT_OF_MEMORY - Failed to allocate memory to
-   *	process the request.
-   * CY_AS_ERROR_TIMEOUT - Failed to send request to firmware.
-   * CY_AS_ERROR_SUCCESS - Burst mode has been stopped.
-
-   See Also
-   * CyAsStorageReadWriteBurstStart
- */
-cy_as_return_status_t
-cy_as_mtp_storage_only_stop(
-	/* Handle to the West Bridge device. */
-	cy_as_device_handle handle,
-	cy_as_function_callback cb,
-	uint32_t client
-	);
-
-#include "cyas_cplus_end.h"
-
-#endif
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasprotocol.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasprotocol.h
deleted file mode 100644
index 773b645ea7eb..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasprotocol.h
+++ /dev/null
@@ -1,3838 +0,0 @@
-/* Cypress West Bridge API header file (cyasprotocol.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASPROTOCOL_H_
-#define _INCLUDED_CYASPROTOCOL_H_
-
-/*
- * Constants defining the per context buffer sizes
- */
-#ifndef __doxygen__
-#define CY_CTX_GEN_MAX_DATA_SIZE  (8)
-#define CY_CTX_RES_MAX_DATA_SIZE  (8)
-#define CY_CTX_STR_MAX_DATA_SIZE  (64)
-#define CY_CTX_USB_MAX_DATA_SIZE  (130 + 23)
-#define CY_CTX_TUR_MAX_DATA_SIZE  (12)
-#endif
-
-/* Summary
-   This response indicates a command has been processed
-   and returned a status.
-
-   Direction
-   West Bridge -> P Port Processor
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = all
-   * Response Code = 0
-
-   D0
-   * 0 = success (CY_AS_ERROR_SUCCESS)
-   * non-zero = error code
-
-   Description
-   This response indicates that a request was processed
-   and no data was generated as a result of the request
-   beyond a single 16 bit status value.  This response
-   contains the 16 bit data value.
- */
-#define CY_RESP_SUCCESS_FAILURE (0)
-
-/* Summary
-   This response indicates an invalid request was sent
-
-   Direction
-   West Bridge -> P Port Processor
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = all
-   * Response Code = 1
-
-   D0
-   * Mailbox contents for invalid request
-
-   Description
-   This response is returned when a request is sent
-   that contains an invalid
-   context or request code.
-*/
-#define CY_RESP_INVALID_REQUEST	(1)
-
-/* Summary
-   This response indicates a request of invalid length was sent
-
-   Direction
-   West Bridge -> P Port Processor
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = all
-   * Response Code = 2
-
-   D0
-   * Mailbox contenxt for invalid request
-   * Length for invalid request
-
-   Description
-   The software API and firmware sends requests across the
-   P Port to West Bridge interface on different contexts.
-   Each contexts has a maximum size of the request packet
-   that can be received.  The size of a request can be
-   determined during the first cycle of a request transfer.
-   If the request is larger than can be handled by the
-   receiving context this response is returned.  Note that
-   the complete request is received before this response is
-   sent, but that the request is dropped after this response
-   is sent.
-*/
-#define CY_RESP_INVALID_LENGTH (2)
-
-
-/* Summary
-   This response indicates a request was made to an
-   invalid storage address.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-	* Context = all
-	* Response Code = 0
-
-   D0
-   Bits 15 - 12 : Media Type
-		   * 0 = NAND
-		   * 1 = SD Flash
-		   * 2 = MMC Flash
-		   * 3 = CE-ATA
-
-   Bits 11 - 8 : Zero based device index
-
-   Bits 7 - 0 : Zero based unit index
-
-   D1
-   Upper 16 bits of block address
-
-   D2
-   Lower 16 bits of block address
-
-   D3
-   Portion of address that is invalid
-		* 0 = Media Type
-		* 1 = Device Index
-		* 2 = Unit Index
-		* 3 = Block Address
-
-   Description
-   This response indicates a request to an invalid storage media
-   address
- */
-#define CY_RESP_NO_SUCH_ADDRESS (3)
-
-
-/******************************************************/
-
-/*@@General requests
-	Summary
-	The general requests include:
-	* CY_RQT_GET_FIRMWARE_VERSION
-	* CY_RQT_SET_TRACE_LEVEL
-	* CY_RQT_INITIALIZATION_COMPLETE
-	* CY_RQT_READ_MCU_REGISTER
-	* CY_RQT_WRITE_MCU_REGISTER
-	* CY_RQT_STORAGE_MEDIA_CHANGED
-	* CY_RQT_CONTROL_ANTIOCH_HEARTBEAT
-	* CY_RQT_PREPARE_FOR_STANDBY
-	* CY_RQT_ENTER_SUSPEND_MODE
-	* CY_RQT_OUT_OF_SUSPEND
-	* CY_RQT_GET_GPIO_STATE
-	* CY_RQT_SET_GPIO_STATE
-	* CY_RQT_SET_SD_CLOCK_FREQ
-	* CY_RQT_WB_DEVICE_MISMATCH
-	* CY_RQT_BOOTLOAD_NO_FIRMWARE
-	* CY_RQT_RESERVE_LNA_BOOT_AREA
-	* CY_RQT_ABORT_P2S_XFER
- */
-
-#ifndef __doxygen__
-#define CY_RQT_GENERAL_RQT_CONTEXT	(0)
-#endif
-
-/* Summary
-   This command returns the firmware version number,
-   media types supported and debug/release mode information.
-
-   Direction
-   P Port Processor-> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 0
-	* Request Code = 0
-
-   Description
-   The response contains the 16-bit major version, the
-   16-bit minor version, the 16 bit build number, media
-   types supported and release/debug mode information.
-
-   Responses
-	* CY_RESP_FIRMWARE_VERSION
- */
-#define CY_RQT_GET_FIRMWARE_VERSION	(0)
-
-
-/* Summary
-   This command changes the trace level and trace information
-   destination within the West Bridge firmware.
-
-   Direction
-   P Port Processor-> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 0
-	* Request Code = 1
-
-   D0
-   Trace Level
-	* 0 = no trace information
-	* 1 = state information
-	* 2 = function call
-	* 3 = function call with args/return value
-
-   D1
-   Bits 12 - 15 : MediaType
-	* 0 = NAND
-	* 1 = SDIO Flash
-	* 2 = MMC Flash
-	* 3 = CE-ATA
-
-   Bits 8 - 11 : Zero based device index
-
-   Bits 0 - 7 : Zero based unit index
-
-   Description
-   The West Bridge firmware contains debugging facilities that can
-   be used to trace the execution of the firmware.  This request
-   sets the level of tracing information that is stored and the
-   location where it is stored.
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_NO_SUCH_ADDRESS
- */
-#define CY_RQT_SET_TRACE_LEVEL (1)
-
-/* Summary
-   This command indicates that the firmware is up and ready
-   for communications with the P port processor.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   2
-
-   Mailbox0
-   * Context = 0
-   * Request Code = 3
-
-   D0
-   Major Version
-
-   D1
-   Minor Version
-
-   D2
-   Build Number
-
-   D3
-   Bits 15-8: Media types supported on Bus 1.
-   Bits  7-0: Media types supported on Bus 0.
-	 Bits 8, 0: NAND support.
-	   * 0: NAND is not supported.
-	   * 1: NAND is supported.
-	 Bits 9, 1: SD memory card support.
-	   * 0: SD memory card is not supported.
-	   * 1: SD memory card is supported.
-	 Bits 10, 2: MMC card support.
-	   * 0: MMC card is not supported.
-	   * 1: MMC card is supported.
-	 Bits 11, 3: CEATA drive support
-	   * 0: CEATA drive is not supported.
-	   * 1: CEATA drive is supported.
-	 Bits 12, 4: SD IO card support.
-	   * 0: SD IO card is not supported.
-	   * 1: SD IO card is supported.
-
-   D4
-   Bits 15 - 8 : MTP information
-	 * 0 : MTP not supported in firmware
-	 * 1 : MTP supported in firmware
-   Bits 7 - 0  : Debug/Release mode information.
-	 * 0 : Release mode
-	 * 1 : Debug mode
-
-   Description
-   When the West Bridge firmware is loaded it being by performing
-   initialization.  Initialization must be complete before West
-   Bridge is ready to accept requests from the P port processor.
-   This request is sent from West Bridge to the P port processor
-   to indicate that initialization is complete.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_INITIALIZATION_COMPLETE	(3)
-
-/* Summary
-   This command requests the firmware to read and return the contents
-   of a MCU accessible
-   register.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 0
-   * Request code = 4
-
-   D0
-   Address of register to read
-
-   Description
-   This debug command allows the processor to read the contents of
-   a MCU accessible register.
-
-   Responses
-   * CY_RESP_MCU_REGISTER_DATA
- */
-#define CY_RQT_READ_MCU_REGISTER	(4)
-
-/* Summary
-   This command requests the firmware to write to an MCU
-   accessible register.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 0
-   * Request code = 5
-
-   D0
-   Address of register to be written
-
-   D1
-   Bits 15 - 8 : Mask to be applied to existing data.
-   Bits 7  - 0 : Data to be ORed with masked data.
-
-   Description
-   This debug command allows the processor to write to an MCU
-   accessible register.
-   Note: This has to be used with caution, and is supported by
-   the firmware only in special debug builds.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_WRITE_MCU_REGISTER	(5)
-
-/* Summary
-   This command tells the West Bridge firmware that a change in
-   storage media has been detected.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 0
-   * Request code = 6
-
-   Description
-   If the insertion or removal of SD or MMC cards is detected by
-   hardware external to West Bridge, this command is used to tell
-   the West Bridge firmware to re-initialize the storage controlled
-   by the device.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
-*/
-#define CY_RQT_STORAGE_MEDIA_CHANGED (6)
-
-/* Summary
-   This command enables/disables the periodic heartbeat message
-   from the West Bridge firmware to the processor.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 0
-   * Request code = 7
-
-   Description
-   This command enables/disables the periodic heartbeat message
-   from the West Bridge firmware to the processor. The heartbeat
-   message is left enabled by default, and can lead to a loss
-   in performance on the P port interface.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_CONTROL_ANTIOCH_HEARTBEAT	 (7)
-
-/* Summary
-   This command requests the West Bridge firmware to prepare for
-   the device going into standby
-   mode.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 0
-   * Request code = 8
-
-   Description
-   This command is sent by the processor to the West Bridge as
-   preparation for going into standby mode. The request allows the
-   firmware to complete any pending/cached storage operations before
-   going into the low power state.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_PREPARE_FOR_STANDBY (8)
-
-/* Summary
-   Requests the firmware to go into suspend mode.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 0
-   * Request code = 9
-
-   D0
-   Bits 7-0: Wakeup control information.
-
-   Description
-   This command is sent by the processor to the West Bridge to
-   request the device to be placed in suspend mode. The firmware
-   will complete any pending/cached storage operations before
-   going into the low power state.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_ENTER_SUSPEND_MODE (9)
-
-/* Summary
-   Indicates that the device has left suspend mode.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 0
-   * Request code = 10
-
-   Description
-   This message is sent by the West Bridge to the Processor
-   to indicate that the device has woken up from suspend mode,
-   and is ready to accept new requests.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_OUT_OF_SUSPEND	(10)
-
-/* Summary
-   Request to get the current state of an West Bridge GPIO pin.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 0
-   * Request code = 11
-
-   D0
-   Bits 15 - 8 : GPIO pin identifier
-
-   Responses
-   * CY_RESP_GPIO_STATE
-
-   Description
-   Request from the processor to get the current state of
-   an West Bridge GPIO pin.
- */
-#define CY_RQT_GET_GPIO_STATE (11)
-
-/* Summary
-   Request to update the output value on an West Bridge
-   GPIO pin.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 0
-   * Request code = 12
-
-   D0
-   Bits 15 - 8 : GPIO pin identifier
-   Bit  0	  : Desired output state
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
-
-   Description
-   Request from the processor to update the output value on
-   an West Bridge GPIO pin.
- */
-#define CY_RQT_SET_GPIO_STATE (12)
-
-/* Summary
-   Set the clock frequency on the SD interface of the West
-   Bridge device.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 0
-   * Request code = 13
-
-   D0
-   Bit 8: Type of SD/MMC media
-		  0 = low speed media
-		  1 = high speed media
-   Bit 0: Clock frequency selection
-		  0 = Default frequency
-		  1 = Alternate frequency (24 MHz in both cases)
-
-   Description
-   This request is sent by the processor to set the operating clock
-   frequency used on the SD interface of the device.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_SET_SD_CLOCK_FREQ (13)
-
-/* Summary
-   Indicates the firmware downloaded to West Bridge cannot
-   run on the active device.
-
-   Direction
-   West Bridge -> P Port processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 0
-   * Request code = 14
-
-   Description
-   Some versions of West Bridge firmware can only run on specific
-   types/versions of the West Bridge device.  This error is
-   returned when a firmware image is downloaded onto a device that
-   does not support it.
-
-   Responses
-   * None
- */
-#define CY_RQT_WB_DEVICE_MISMATCH	(14)
-
-/* Summary
-   This command is indicates that no firmware was found in the
-   storage media.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 0
-   * Request code = 15
-
-   Description
-   The command is received only in case of silicon with bootloader
-   ROM. The device sends the request if there is no firmware image
-   found in the storage media or the image is  corrupted. The
-   device is waiting for P port to download a valid firmware image.
-
-   Responses
-   * None
- */
-#define CY_RQT_BOOTLOAD_NO_FIRMWARE	(15)
-
-/* Summary
-   This command reserves first numzones zones of nand device for
-   storing processor boot image.
-
-   Direction
-   P Port Processor-> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 0
-	* Request Code = 16
-
-   D0
-   Bits 7-0: numzones
-
-   Description
-   The first numzones zones in nand device will be used for storing
-   proc boot image. LNA firmware in Astoria will work on this nand
-   area and boots the processor which will then use the remaining
-   nand for usual purposes.
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_RESERVE_LNA_BOOT_AREA (16)
-
-/* Summary
-   This command cancels the processing of a P2S operation in
-   firmware.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 0
-	* Request Code = 17
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE
-*/
-#define CY_RQT_ABORT_P2S_XFER (17)
-
-/*
- * Used for debugging, ignore for normal operations
- */
-#ifndef __doxygen__
-#define CY_RQT_DEBUG_MESSAGE (127)
-#endif
-
-/******************************************************/
-
-/*@@General responses
-   Summary
-   The general responses include:
-   * CY_RESP_FIRMWARE_VERSION
-   * CY_RESP_MCU_REGISTER_DATA
-   * CY_RESP_GPIO_STATE
- */
-
-
-/* Summary
-   This response indicates success and contains the firmware
-   version number, media types supported by the firmware and
-   release/debug mode information.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   2
-
-   MailBox0
-	* Context = 0
-	* Response Code = 16
-
-   D0
-   Major Version
-
-   D1
-   Minor Version
-
-   D2
-   Build Number
-
-   D3
-   Bits 15-8: Media types supported on Bus 1.
-   Bits  7-0: Media types supported on Bus 0.
-	 Bits 8, 0: NAND support.
-	   * 0: NAND is not supported.
-	   * 1: NAND is supported.
-	 Bits 9, 1: SD memory card support.
-	   * 0: SD memory card is not supported.
-	   * 1: SD memory card is supported.
-	 Bits 10, 2: MMC card support.
-	   * 0: MMC card is not supported.
-	   * 1: MMC card is supported.
-	 Bits 11, 3: CEATA drive support
-	   * 0: CEATA drive is not supported.
-	   * 1: CEATA drive is supported.
-	 Bits 12, 4: SD IO card support.
-	   * 0: SD IO card is not supported.
-	   * 1: SD IO card is supported.
-
-   D4
-   Bits 15 - 8 : MTP information
-	 * 0 : MTP not supported in firmware
-	 * 1 : MTP supported in firmware
-   Bits 7 - 0  : Debug/Release mode information.
-	 * 0 : Release mode
-	 * 1 : Debug mode
-
-   Description
-   This response is sent to return the firmware version
-   number to the requestor.
- */
-#define CY_RESP_FIRMWARE_VERSION (16)
-
-/* Summary
-   This response returns the contents of a MCU accessible
-   register to the processor.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 0
-	* Response code = 17
-
-   D0
-   Bits 7 - 0 : MCU register contents
-
-   Description
-   This response is sent by the firmware in response to the
-   CY_RQT_READ_MCU_REGISTER
-   command.
- */
-#define CY_RESP_MCU_REGISTER_DATA (17)
-
-/* Summary
-   Reports the current state of an West Bridge GPIO pin.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   MailBox0
-   * Context = 0
-   * Request code = 18
-
-   D0
-   Bit 0: Current state of the GP input pin
-
-   Description
-   This response is sent by the West Bridge to report the
-   current state observed on a general purpose input pin.
- */
-#define CY_RESP_GPIO_STATE (18)
-
-
-/* Summary
-   This command notifies West Bridge the polarity of the
-   SD power pin
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 0
-	* Request Code = 19
-  D0: CyAnMiscActivehigh / CyAnMiscActivelow
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-
- */
-
-#define CY_RQT_SDPOLARITY (19)
-
-/******************************/
-
-/*@@Resource requests
-   Summary
-
-   The resource requests include:
-   * CY_RQT_ACQUIRE_RESOURCE
-   * CY_RQT_RELEASE_RESOURCE
- */
-
-
-
-
-
-#ifndef __doxygen__
-#define CY_RQT_RESOURCE_RQT_CONTEXT	(1)
-#endif
-
-
-/* Summary
-   This command is a request from the P port processor
-   for ownership of a resource.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 1
-	* Request Code = 0
-
-   D0
-   Resource
-	* 0 = USB
-	* 1 = SDIO/MMC
-	* 2 = NAND
-
-   D1
-   Force Flag
-	* 0 = Normal
-	* 1 = Force
-
-   Description
-   The resource may be the USB pins, the SDIO/MMC bus,
-   or the NAND bus.
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_NOT_RELEASED
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_BAD_RESOURCE
- */
-#define CY_RQT_ACQUIRE_RESOURCE (0)
-
-
-/* Summary
-   This command is a request from the P port processor
-   to release ownership of a resource.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 1
-	* Request Code = 1
-
-   D0
-   Resource
-   * 0 = USB
-   * 1 = SDIO/MMC
-   * 2 = NAND
-
-   Description
-   The resource may be the USB pins, the SDIO/MMC bus, or
-   the NAND bus.
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_NOT_OWNER
- */
-#define CY_RQT_RELEASE_RESOURCE (1)
-
-
-/****************************/
-
-/*@@Storage requests
-   Summary
-   The storage commands include:
-	 * CY_RQT_START_STORAGE
-	 * CY_RQT_STOP_STORAGE
-	 * CY_RQT_CLAIM_STORAGE
-	 * CY_RQT_RELEASE_STORAGE
-	 * CY_RQT_QUERY_MEDIA
-	 * CY_RQT_QUERY_DEVICE
-	 * CY_RQT_QUERY_UNIT
-	 * CY_RQT_READ_BLOCK
-	 * CY_RQT_WRITE_BLOCK
-	 * CY_RQT_MEDIA_CHANGED
-	 * CY_RQT_ANTIOCH_CLAIM
-	 * CY_RQT_ANTIOCH_RELEASE
-	 * CY_RQT_SD_INTERFACE_CONTROL
-	 * CY_RQT_SD_REGISTER_READ
-	 * CY_RQT_CHECK_CARD_LOCK
-	 * CY_RQT_QUERY_BUS
-	 * CY_RQT_PARTITION_STORAGE
-	 * CY_RQT_PARTITION_ERASE
-	 * CY_RQT_GET_TRANSFER_AMOUNT
-	 * CY_RQT_ERASE
-	 * CY_RQT_SDIO_READ_DIRECT
-	 * CY_RQT_SDIO_WRITE_DIRECT
-	 * CY_RQT_SDIO_READ_EXTENDED
-	 * CY_RQT_SDIO_WRITE_EXTENDED
-	 * CY_RQT_SDIO_INIT_FUNCTION
-	 * CY_RQT_SDIO_QUERY_CARD
-	 * CY_RQT_SDIO_GET_TUPLE
-	 * CY_RQT_SDIO_ABORT_IO
-	 * CY_RQT_SDIO_INTR
-	 * CY_RQT_SDIO_SUSPEND
-	 * CY_RQT_SDIO_RESUME
-	 * CY_RQT_SDIO_RESET_DEV
-	 * CY_RQT_P2S_DMA_START
- */
-#ifndef __doxygen__
-#define CY_RQT_STORAGE_RQT_CONTEXT (2)
-#endif
-
-/* Summary
-   This command requests initialization of the storage stack.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 0
-
-   Description
-   This command is required before any other storage related command
-   can be send to the West Bridge firmware.
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_ALREADY_RUNNING
- */
-#define CY_RQT_START_STORAGE (0)
-
-
-/* Summary
-   This command requests shutdown of the storage stack.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 1
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_NOT_RUNNING
- */
-#define CY_RQT_STOP_STORAGE (1)
-
-
-/* Summary
-   This command requests ownership of the given media
-   type by the P port processor.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 2
-
-   D0
-   Bits 12 - 15 : Bus Index
-   Bits  8 - 11 : Zero based device index
-
-   Responses
-	* CY_RESP_MEDIA_CLAIMED_RELEASED
-	* CY_RESP_NO_SUCH_ADDRESS
- */
-#define CY_RQT_CLAIM_STORAGE (2)
-
-
-/* Summary
-   This command releases ownership of a given media type
-   by the P port processor.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 3
-
-   D0
-   Bits 12 - 15 : Bus Index
-   Bits  8 - 11 : Zero based device index
-
-   Responses
-	* CY_RESP_MEDIA_CLAIMED_RELEASED
-	* CY_RESP_NO_SUCH_ADDRESS
- */
-#define CY_RQT_RELEASE_STORAGE (3)
-
-
-/* Summary
-   This command returns the total number of logical devices
-   of the given type of media.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 4
-
-   D0
-   Bits 12 - 15 : MediaType
-	* 0 = NAND
-	* 1 = SDIO Flash
-	* 2 = MMC Flash
-	* 3 = CE-ATA
-
-   Bits 8 - 11 : Not Used
-
-   Bits 0 - 7 : Not Used
-
-   Responses
-	* CY_RESP_MEDIA_DESCRIPTOR
-	* CY_RESP_NO_SUCH_ADDRESS
- */
-#define CY_RQT_QUERY_MEDIA (4)
-
-
-/* Summary
-   This command queries a given device to determine
-   information about the number of logical units on
-   the given device.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 5
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits 8 - 11  : Zero based device index
-   Bits 0 - 7   : Not Used
-
-   Responses
-	* CY_RESP_DEVICE_DESCRIPTOR
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_INVALID_PARTITION_TABLE
-	* CY_RESP_NO_SUCH_ADDRESS
- */
-#define CY_RQT_QUERY_DEVICE (5)
-
-
-/* Summary
-   This command queries a given device to determine
-   information about the size and location of a logical unit
-   located on a physical device.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 6
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits 8 - 11  : Zero based device index
-   Bits 0 - 7   : Zero based unit index
-
-   Responses
-	* CY_RESP_UNIT_DESCRIPTOR
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_INVALID_PARTITION_TABLE
-	* CY_RESP_NO_SUCH_ADDRESS
- */
-#define CY_RQT_QUERY_UNIT (6)
-
-
-/* Summary
-   This command initiates the read of a specific block
-   from the given media,
-   device and unit.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   2
-
-   MailBox0
-	* Context = 2
-	* Request Code = 7
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits 8 - 11  : Zero based device index
-   Bits 0 - 7   : Zero based unit index
-
-   D1
-   Upper 16 bits of block address
-
-   D2
-   Lower 16 bits of block address
-
-   D3
-   BIT 8 - 15 : Upper 8 bits of Number of blocks
-
-   BIT 0 - 7 : Reserved
-
-   * D4 *
-   BITS 8 - 15 : Lower 8 bits of Number of blocks
-   BITS 1 -  7 : Not Used
-   BIT  0	  : Indicates whether this command is a
-   part of a P2S only burst.
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_ANTIOCH_DEFERRED_ERROR
- */
-#define CY_RQT_READ_BLOCK (7)
-
-
-/* Summary
-   This command initiates the write of a specific block
-   from the given media, device and unit.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   2
-
-   MailBox0
-	* Context = 2
-	* Request Code = 8
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits 8 - 11 : Zero based device index
-   Bits 0 - 7 : Zero based unit index
-
-   D1
-   Upper 16 bits of block address
-
-   D2
-   Lower 16 bits of block address
-
-   D3
-   BIT 8 - 15 : Upper 8 bits of Number of blocks
-
-   BIT 0 - 7 : Reserved
-
-   * D4 *
-   BITS 8 - 15 : Lower 8 bits of Number of blocks
-   BITS 1 -  7 : Not Used
-   BIT  0	  : Indicates whether this command is a
-    part of a P2S only burst.
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_ANTIOCH_DEFERRED_ERROR
- */
-#define CY_RQT_WRITE_BLOCK (8)
-
-/* Summary
-   This request is sent when the West Bridge device detects
-   a change in the status of the media.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 2
-   * Request Code = 9
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  0 -  7 : Media type
-
-	D1
-	Bit 0 : Action
-	 * 0 = Inserted
-	 * 1 = Removed
-
-	Description
-	When the media manager detects the insertion or removal
-	of a media from the West Bridge port, this request is sent
-	from the West Bridge device to the P Port processor to
-	inform the processor of the change in status of the media.
-	This request is sent for both an insert operation and a
-	removal operation.
-
-	Responses
-	* CY_RESPO_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_MEDIA_CHANGED (9)
-
-/* Summary
-   This request is sent when the USB module wishes to claim
-   storage media.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 2
-   * Request Code = 10
-
-   D0
-   Bit 0:
-	* 0 = do not release NAND
-	* 1 = release NAND
-
-   Bit 1:
-	* 0 = do not release SD Flash
-	* 1 = release SD Flash
-
-   Bit 2:
-	* 0 = do not release MMC flash
-	* 1 = release MMC flash
-
-   Bit 3:
-	* 0 = do not release CE-ATA storage
-	* 1 = release CE-ATA storage
-
-   Bit 8:
-	* 0 = do not release storage on bus 0
-	* 1 = release storage on bus 0
-
-   Bit 9:
-	* 0 = do not release storage on bus 1
-	* 1 = release storage on bus 1
-
-   Description
-   When the USB cable is attached to the West Bridge device,
-   West Bridge will enumerate the storage devices per the USB
-   initialization of West Bridge.  In order for West Bridge to
-   respond to requests received via USB for the mass storage
-   devices, the USB module must claim the storeage.  This
-   request is a request to the P port processor to release the
-   storage medium.  The medium will not be visible on the USB
-   host, until it has been released by the processor.
-*/
-#define CY_RQT_ANTIOCH_CLAIM (10)
-
-/* Summary
-   This request is sent when the P port has asked West Bridge to
-   release storage media, and the West Bridge device has
-   completed this.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 2
-   * Request Code = 11
-
-   D0
-   Bit 0:
-	* 0 = No change in ownership of NAND storage
-	* 1 = NAND ownership has been given to processor
-
-   Bit 1:
-	* 0 = No change in ownership of SD storage
-	* 1 = SD ownership has been given to processor
-
-   Bit 2:
-	* 0 = No change in ownership of MMC storage
-	* 1 = MMC ownership has been given to processor
-
-   Bit 3:
-	* 0 = No change in ownership of CE-ATA storage
-	* 1 = CE-ATA ownership has been given to processor
-
-   Bit 4:
-	* 0 = No change in ownership of SD IO device
-	* 1 = SD IO device ownership has been given to processor
-
-   Bit 8:
-	* 0 = No change in ownership of storage on bus 0
-	* 1 = Bus 0 ownership has been given to processor
-
-   Bit 9:
-	* 0 = No change in ownership of storage on bus 1
-	* 1 = Bus 1 ownership has been given to processor
-
-   Description
-   When the P port asks for control of a particular media, West
-   Bridge may be able to release the media immediately.  West
-   Bridge may also need to complete the flush of buffers before
-   releasing the media.  In the later case, West Bridge will
-   indicated a release is not possible immediately and West Bridge
-   will send this request to the P port when the release has been
-   completed.
-*/
-#define CY_RQT_ANTIOCH_RELEASE (11)
-
-/* Summary
-   This request is sent by the Processor to enable/disable the
-   handling of SD card detection and SD card write protection
-   by the firmware.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 2
-   * Request code = 12
-
-   D0
-   Bit 8: Enable/disable handling of card detection.
-   Bit 1: SDAT_3 = 0, GIPO_0 = 1
-   Bit 0: Enable/disable handling of write protection.
-
-   Description
-   This request is sent by the Processor to enable/disable
-   the handling of SD card detection and SD card write
-   protection by the firmware.
- */
-#define CY_RQT_SD_INTERFACE_CONTROL	 (12)
-
-/* Summary
-   Request from the processor to read a register on the SD
-   card, and return the contents.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 2
-   * Request code = 13
-
-   D0
-   Bits 12 - 15 : MediaType
-	* 0 = Reserved
-	* 1 = SDIO Flash
-	* 2 = MMC Flash
-	* 3 = Reserved
-
-   Bits 8 - 11 : Zero based device index
-   Bits 0 - 7  : Type of register to read
-
-   Description
-   This request is sent by the processor to instruct the
-   West Bridge to read a register on the SD/MMC card, and
-   send the contents back through the CY_RESP_SD_REGISTER_DATA
-   response.
- */
-#define CY_RQT_SD_REGISTER_READ	 (13)
-
-/* Summary
-   Check if the SD/MMC card connected to West Bridge is
-   password locked.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 2
-   * Request code = 14
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits 8 - 11  : Zero based device index
-
-   Description
-   This request is sent by the processor to check if the
-   SD/MMC connected to the West Bridge is locked with a
-   password.
- */
-#define CY_RQT_CHECK_CARD_LOCK	(14)
-
-/* Summary
-   This command returns the total number of logical devices on the
-   given bus
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 15
-
-   D0
-   Bits 12 - 15 : Bus Number
-
-   Bits 0 - 11: Not Used
-
-   Responses
-	* CY_RESP_BUS_DESCRIPTOR
-	* CY_RESP_NO_SUCH_BUS
- */
-#define CY_RQT_QUERY_BUS	(15)
-
-/* Summary
-   Divide a storage device into two partitions.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-   * Context = 2
-   * Request code = 16
-
-   D0
-   Bits 12 - 15 : Bus number
-   Bits  8 - 11 : Device number
-   Bits  0 -  7 : Not used
-
-   D1
-   Size of partition 0 (MS word)
-
-   D2
-   Size of partition 0 (LS word)
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_PARTITION_STORAGE			 (16)
-
-/* Summary
-   Remove the partition table and unify all partitions on
-   a storage device.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-   * Context = 2
-   * Request code = 17
-
-   D0
-   Bits 12 - 15 : Bus number
-   Bits  8 - 11 : Device number
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_PARTITION_ERASE (17)
-
-/* Summary
-   Requests the current transfer amount.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-   * Context = 2
-   * Request code = 18
-
-   D0
-   Bits 12 - 15 : Bus number
-   Bits  8 - 11 : Device number
-
-   Responses
-   * CY_RESP_TRANSFER_COUNT
- */
-#define CY_RQT_GET_TRANSFER_AMOUNT  (18)
-
-/* Summary
-   Erases.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   2
-
-   MailBox0
-   * Context = 2
-   * Request code = 19
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits 8 - 11 : Zero based device index
-   Bits 0 - 7 : Zero based unit index
-
-   D1
-   Upper 16 bits of erase unit
-
-   D2
-   Lower 16 bits of erase unit
-
-   D3
-   BIT 8 - 15 : Upper 8 bits of Number of erase units
-   BIT 0 - 7 : Reserved
-
-   * D4 *
-   BIT 8 - 15 : Lower 8 bits of Number of erase units
-   BIT 0 - 7 : Not Used
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
- */
-#define CY_RQT_ERASE (19)
-
-/* Summary
-   This command reads 1 byte from an SDIO card.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 23
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : Zero based function number
-
-   D1
-   Bits 8 - 15  : 0
-   Bit  7	   : 0 to indicate a read
-   Bits 4 - 6   : Function number
-   Bit  3	   : 0
-   Bit  2	   : 1 if SDIO interrupt needs to be re-enabled.
-   Bits 0 -  1  : Two Most significant bits of Read address
-
-   D2
-   Bits 1 - 15  : 15 Least significant bits of Read address
-   Bit  0	   : 0
-
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE
-	* CY_RESP_SDIO_DIRECT
-*/
-#define CY_RQT_SDIO_READ_DIRECT	 (23)
-
-/* Summary
-   This command writes 1 byte to an SDIO card.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 24
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : Zero based function number
-
-   D1
-   Bits 8 - 15  : Data to write
-   Bit  7	   : 1 to indicate a write
-   Bits 4 - 6   : Function number
-   Bit  3	   : 1 if Read after write is enabled
-   Bit  2	   : 1 if SDIO interrupt needs to be re-enabled.
-   Bits 0 - 1   : Two Most significant bits of write address
-
-   D2
-   Bits 1 - 15  : 15 Least significant bits of write address
-   Bit  0	   : 0
-
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SDIO_DIRECT
-*/
-#define CY_RQT_SDIO_WRITE_DIRECT (24)
-
-/* Summary
-   This command reads performs a multi block/byte read from
-   an SDIO card.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 25
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : Zero based function number
-
-   D1
-   Bit  15	  : 0 to indicate a read
-   Bit  12 - 14 : Function Number
-   Bit  11	  : Block Mode
-   Bit  10	  : OpCode
-   Bits  0 -  9 : 10 Most significant bits of Read address
-
-   D2
-   Bits 9 - 15  : 7 Least significant bits of address
-   Bits 0 -  8  : Block/Byte Count
-
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SDIO_EXT
-*/
-#define CY_RQT_SDIO_READ_EXTENDED (25)
-
-/* Summary
-   This command reads performs a multi block/byte write
-   to an SDIO card.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 26
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : Zero based function number
-
-   D1
-   Bit  15	  : 1 to indicate a write
-   Bit  12 - 14 : Function Number
-   Bit  11	  : Block Mode
-   Bit  10	  : OpCode
-   Bits  0 -  9 : 10 Most significant bits of Read address
-
-   D2
-   Bits 9 - 15  : 7 Least significant bits of address
-   Bits 0 -  8  : Block/Byte Count
-
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SDIO_EXT
-*/
-#define CY_RQT_SDIO_WRITE_EXTENDED	(26)
-
-/* Summary
-   This command initialises an IO function on the SDIO card.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 27
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : Zero based function number
-
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_SDIO_INIT_FUNCTION	 (27)
-
-/* Summary
-   This command gets properties of the SDIO card.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 28
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : Zero
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_QUERY_CARD
-*/
-#define CY_RQT_SDIO_QUERY_CARD (28)
-
-/* Summary
-   This command reads a tuple from the CIS of an SDIO card.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 29
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : Zero based function number
-
-   D1
-   Bits  8 - 15 : Tuple ID to read
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SDIO_GET_TUPLE
-*/
-#define CY_RQT_SDIO_GET_TUPLE (29)
-
-/* Summary
-   This command Aborts an IO operation.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 30
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : Zero based function number
-
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_SDIO_ABORT_IO (30)
-
-/* Summary
-   SDIO Interrupt request sent to the processor from the West Bridge device.
-
-   Direction
-   West Bridge ->P Port Processor
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 31
-
-   D0
-   Bits 0 - 7 : Bus Index
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_SDIO_INTR (31)
-
-/* Summary
-   This command Suspends an IO operation.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 32
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : Zero based function number
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_SDIO_SUSPEND	 (32)
-
-/* Summary
-   This command resumes a suspended operation.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 33
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : Zero based function number
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SDIO_RESUME
-*/
-#define CY_RQT_SDIO_RESUME	(33)
-
-/* Summary
-   This command resets an SDIO device.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request Code = 34
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : 0
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_SDIO_RESET_DEV (34)
-
-/* Summary
-   This command asks the API to start the DMA transfer
-   for a P2S operation.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Request code = 35
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_P2S_DMA_START (35)
-
-/******************************************************/
-
-/*@@Storage responses
-   Summary
-   The storage responses include:
-	  * CY_RESP_MEDIA_CLAIMED_RELEASED
-	  * CY_RESP_MEDIA_DESCRIPTOR
-	  * CY_RESP_DEVICE_DESCRIPTOR
-	  * CY_RESP_UNIT_DESCRIPTOR
-	  * CY_RESP_ANTIOCH_DEFERRED_ERROR
-	  * CY_RESP_SD_REGISTER_DATA
-	  * CY_RESP_SD_LOCK_STATUS
-	  * CY_RESP_BUS_DESCRIPTOR
-	  * CY_RESP_TRANSFER_COUNT
-	  * CY_RESP_SDIO_EXT
-	  * CY_RESP_SDIO_INIT_FUNCTION
-	  * CY_RESP_SDIO_QUERY_CARD
-	  * CY_RESP_SDIO_GET_TUPLE
-	  * CY_RESP_SDIO_DIRECT
-	  * CY_RESP_SDIO_INVALID_FUNCTION
-	  * CY_RESP_SDIO_RESUME
- */
-
-/* Summary
-   Based on the request sent, the state of a given media was
-   changed as indicated by this response.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Response Code = 16
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-
-   D1
-   State of Media
-	* 0 = released
-	* 1 = claimed
- */
-#define	CY_RESP_MEDIA_CLAIMED_RELEASED	(16)
-
-
-/* Summary
-   This response gives the number of physical devices
-   associated with a given media type.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Response Code = 17
-
-   D0
-   Media Type
-	Bits 12 - 15
-	* 0 = NAND
-	* 1 = SDIO Flash
-	* 2 = MMC Flash
-	* 3 = CE-ATA
-
-   D1
-   Number of devices
- */
-#define CY_RESP_MEDIA_DESCRIPTOR (17)
-
-
-/* Summary
-   This response gives description of a physical device.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   2
-
-   MailBox0
-	* Context = 2
-	* Response Code = 18
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : Type of media present on bus
-
-   D1
-   Block Size in bytes
-
-   D2
-   Bit  15	: Is device removable
-   Bit  9	 : Is device password locked
-   Bit  8	 : Is device writeable
-   Bits 0 - 7 : Number Of Units
-
-   D3
-   ERASE_UNIT_SIZE high 16 bits
-
-   D4
-   ERASE_UNIT_SIZE low 16 bits
-
- */
-#define CY_RESP_DEVICE_DESCRIPTOR (18)
-
-
-/* Summary
-   This response gives description of a unit on a
-   physical device.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   6
-
-   MailBox0
-	* Context = 2
-	* Response Code = 19
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits 8 - 11  : Zero based device index
-   Bits 0 - 7   : Zero based unit index
-
-   D1
-   Bits 0 - 7   : Media type
-	 * 1  = NAND
-	 * 2  = SD FLASH
-	 * 4  = MMC FLASH
-	 * 8  = CEATA
-	 * 16 = SD IO
-
-   D2
-   Block Size in bytes
-
-   D3
-   Start Block Low 16 bits
-
-   D4
-   Start Block High 16 bits
-
-   D5
-   Unit Size Low 16 bits
-
-   D6
-   Unit Size High 16 bits
- */
-#define CY_RESP_UNIT_DESCRIPTOR (19)
-
-
-/* Summary
-   This response is sent as error status for P2S
-   Storage operation.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   2
-
-   Mailbox0
-   * Context = 2
-   * Request Code = 20
-
-   D0
-   Bit 8 : Type of operation (Read / Write)
-   Bits 7 - 0 : Error code
-
-   D1
-   Bits 12 - 15 : Bus index
-   Bits 8 - 11  : Zero based device index
-   Bits 0 - 7   : Zero based unit index
-
-   *D2 - D3*
-   Address where the error occurred.
-
-   D4
-   Length of the operation in blocks.
-
-   Description
-   This error is returned by the West Bridge to the
-   processor if a storage operation fails due to a
-   medium error.
-*/
-#define CY_RESP_ANTIOCH_DEFERRED_ERROR	 (20)
-
-/* Summary
-   Contents of a register on the SD/MMC card connected to
-   West Bridge.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   Variable
-
-   Mailbox0
-   * Context = 2
-   * Request code = 21
-
-   D0
-   Length of data in bytes
-
-   D1 - Dn
-   The register contents
-
-   Description
-   This is the response to a CY_RQT_SD_REGISTER_READ
-	request.
-*/
-#define CY_RESP_SD_REGISTER_DATA (21)
-
-/* Summary
-   Status of whether the SD card is password locked.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 2
-   * Request code = 22
-
-   D0
-   Bit 0 : The card's lock status
-
-   Description
-   Status of whether the SD card is password locked.
-*/
-#define CY_RESP_SD_LOCK_STATUS	(22)
-
-
-/* Summary
-   This response gives the types of physical devices
-   attached to a given bus.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 2
-	* Response Code = 23
-
-   D0
-   Bus Number
-	Bits 12 - 15
-
-   D1
-   Media present on addressed bus
- */
-#define CY_RESP_BUS_DESCRIPTOR	(23)
-
-/* Summary
-   Amount of data read/written through the USB mass
-   storage/MTP device.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   2
-
-   MailBox0
-   * Context = 2
-   * Request code = 24
-
-   D0
-   MS 16 bits of number of sectors written
-
-   D1
-   LS 16 bits of number of sectors written
-
-   D2
-   MS 16 bits of number of sectors read
-
-   D3
-   LS 16 bits of number of sectors read
-
-   Description
-   This is the response to the CY_RQT_GET_TRANSFER_AMOUNT
-   request, and represents the number of sectors of data
-   that has been written to or read from the storage device
-   through the USB Mass storage or MTP interface.
- */
-#define CY_RESP_TRANSFER_COUNT (24)
-
-/* Summary
-   Status of SDIO Extended read/write operation.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 2
-   * Request code = 34
-
-   D0
-   Bit 8 : 1 if Read response, 0 if write response
-   Bits 0-7: Error Status
-
-   Description
-   Status of SDIO Extended read write operation.
-*/
-
-#define CY_RESP_SDIO_EXT (34)
-
-/* Summary
-   Status of SDIO operation to Initialize a function
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   2
-
-   Mailbox0
-   * Context = 2
-   * Request code = 35
-
-
-   D0
-   Bits 8-15 : Function Interface Code
-   Bits 0-7: Extended Function Interface Code
-
-   D1
-   Bits 0-15 : Function Block Size
-
-   D2
-   Bits 0-15 : Most significant Word of Function PSN
-
-   D3
-   Bits 0-15 : Least significant Word of Function PSN
-
-   D4
-   Bit 15 : CSA Enabled Status
-   Bit 14 : CSA Support Status
-   Bit 9  : CSA No Format Status
-   Bit 8  : CSA Write Protect Status
-   Bit 0  : Function Wake Up Support status
-
-   Description
-   Status of SDIO Function Initialization operation.
-*/
-#define CY_RESP_SDIO_INIT_FUNCTION	(35)
-
-/* Summary
-   Status of SDIO operation to query the Card
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   2
-
-   Mailbox0
-   * Context = 2
-   * Request code = 36
-
-
-   D0
-   Bits 8-15 : Number of IO functions present
-   Bit 0: 1 if memory is present
-
-   D1
-   Bits 0-15 : Card Manufacturer ID
-
-   D2
-   Bits 0-15 : Card Manufacturer Additional Information
-
-   D3
-   Bits 0-15 : Function 0 Block Size
-
-   D4
-   Bits 8-15 :SDIO Card Capability register
-   Bits 0-7: SDIO Version
-
-
-   Description
-   Status of SDIO Card Query operation.
-   */
-#define CY_RESP_SDIO_QUERY_CARD	 (36)
-/* Summary
-   Status of SDIO CIS read operation
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 2
-   * Request code = 37
-
-   D0
-   Bit 8 : 1
-   Bits 0-7: Error Status
-
-   D1
-   Bits 0 - 7 : Size of data read.
-
-   Description
-   Status of SDIO Get Tuple Read operation.
- */
-#define CY_RESP_SDIO_GET_TUPLE (37)
-
-/* Summary
-   Status of SDIO Direct read/write operation.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 2
-   * Request code = 38
-
-   D0
-   Bit 8 : Error Status
-   Bits 0-7: Data Read(If any)
-
-   Description
-   Status of SDIO Direct read write operation.
-
-*/
-#define CY_RESP_SDIO_DIRECT	 (38)
-
-/* Summary
-   Indicates an un-initialized function has been used for IO
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 2
-   * Request code = 39
-
-   Description
-   Indicates an IO request on an uninitialized function.
-*/
-#define CY_RESP_SDIO_INVALID_FUNCTION (39)
-
-/* Summary
-   Response to a Resume request
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 2
-   * Request code = 40
-
-   D0
-   Bits 8-15 : Error Status
-   Bit 0: 1 if data is available. 0 otherwise.
-
-   Description
-   Response to a Resume request. Indicates if data is
-   available after resum or not.
-*/
-#define CY_RESP_SDIO_RESUME	 (40)
-
-/******************************************************/
-
-/*@@USB requests
-   Summary
-   The USB requests include:
-	* CY_RQT_START_USB
-	* CY_RQT_STOP_USB
-	* CY_RQT_SET_CONNECT_STATE
-	* CY_RQT_GET_CONNECT_STATE
-	* CY_RQT_SET_USB_CONFIG
-	* CY_RQT_GET_USB_CONFIG
-	* CY_RQT_STALL_ENDPOINT
-	* CY_RQT_GET_STALL
-	* CY_RQT_SET_DESCRIPTOR
-	* CY_RQT_GET_DESCRIPTOR
-	* CY_RQT_SET_USB_CONFIG_REGISTERS
-	* CY_RQT_USB_EVENT
-	* CY_RQT_USB_EP_DATA
-	* CY_RQT_ENDPOINT_SET_NAK
-	* CY_RQT_GET_ENDPOINT_NAK
-	* CY_RQT_ACK_SETUP_PACKET
-	* CY_RQT_SCSI_INQUIRY_COMMAND
-	* CY_RQT_SCSI_START_STOP_COMMAND
-	* CY_RQT_SCSI_UNKNOWN_COMMAND
-	* CY_RQT_USB_REMOTE_WAKEUP
-	* CY_RQT_CLEAR_DESCRIPTORS
-	* CY_RQT_USB_STORAGE_MONITOR
-	* CY_RQT_USB_ACTIVITY_UPDATE
-	* CY_RQT_MS_PARTITION_SELECT
- */
-#ifndef __doxygen__
-#define CY_RQT_USB_RQT_CONTEXT (3)
-#endif
-
-/* Summary
-   This command requests initialization of the USB stack.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Request Code = 0
-
-   Description
-   This command is required before any other USB related command can be
-   sent to the West Bridge firmware.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-   * CY_RESP_SUCCESS_FAILURE:CY_RESP_ALREADY_RUNNING
- */
-#define CY_RQT_START_USB (0)
-
-
-/* Summary
-   This command requests shutdown of the USB stack.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Request Code = 1
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_NOT_RUNNING
- */
-#define CY_RQT_STOP_USB	 (1)
-
-
-/* Summary
-   This command requests that the USB pins be connected
-   or disconnected to/from the West Bridge device.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Request Code = 2
-
-   D0
-   Desired Connect State
-	* 0 = DISCONNECTED
-	* 1 = CONNECTED
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_NOT_RUNNING
- */
-#define CY_RQT_SET_CONNECT_STATE (2)
-
-
-/* Summary
-   This command requests the connection state of the
-   West Bridge USB pins.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Request Code = 3
-
-   Responses
-	* CY_RESP_CONNECT_STATE
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_NOT_RUNNING
- */
-#define CY_RQT_GET_CONNECT_STATE (3)
-
-
-/* Summary
-   This request configures the USB subsystem.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   2
-
-   MailBox0
-	* Context = 3
-	* Request Code = 4
-
-   D0
-   Bits 8 - 15: Media to enumerate (bit mask)
-   Bits 0 - 7: Enumerate Mass Storage (bit mask)
-	* 1 = Enumerate device on bus 0
-	* 2 = Enumerate device on bus 1
-
-   D1
-   Enumeration Methodology
-	* 1 = West Bridge enumeration
-	* 0 = P Port enumeration
-
-   D2
-   Mass storage interface number - Interface number to
-   be used for the mass storage interface
-
-   D3
-   Mass storage callbacks
-	* 1 = relay to P port
-	* 0 = completely handle in firmware
-
-   Description
-   This indicates how enumeration should be handled.
-   Enumeration can be handled by the West Bridge device
-   or by the P port processor.
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_INVALID_MASK
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_INVALID_STORAGE_MEDIA
- */
-#define CY_RQT_SET_USB_CONFIG (4)
-
-
-/* Summary
-   This request retrieves the current USB configuration from
-   the West Bridge device.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Request Code = 5
-
-   Responses
-	* CY_RESP_USB_CONFIG
- */
-#define CY_RQT_GET_USB_CONFIG (5)
-
-
-/* Summary
-   This request stalls the given endpoint.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Request Code = 6
-
-   D0
-   Endpoint Number
-
-   D1
-	* 1 = Stall Endpoint
-	* 0 = Clear Stall
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_INVALID_ENDPOINT
- */
-#define CY_RQT_STALL_ENDPOINT (6)
-
-
-/* Summary
-   This request retrieves the stall status of the
-   requested endpoint.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Request Code = 7
-
-   D0
-   Endpoint number
-
-   Responses
-	* CY_RESP_ENDPOINT_STALL
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_INVALID_ENDPOINT
- */
-#define CY_RQT_GET_STALL (7)
-
-
-/* Summary
-   This command sets the contents of a descriptor.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Request Code = 8
-
-   D0
-	Bit 15 - Bit 8
-	Descriptor Index
-
-	Bit 7 - Bit 0
-	Descriptor Type
-	* Device = 1
-	* Device Qualifier = 2
-	* Full Speed Configuration = 3
-	* High Speed Configuration = 4
-
-   * D1 - DN *
-   Actual data for the descriptor
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_BAD_TYPE
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_BAD_INDEX
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_BAD_LENGTH
- */
-#define CY_RQT_SET_DESCRIPTOR (8)
-
-/* Summary
-   This command gets the contents of a descriptor.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Request Code = 9
-
-   D0
-	Bit 15 - Bit 8
-	Descriptor Index
-
-	Bit 7 - Bit 0
-	Descriptor Type
-	* Device = 1
-	* Device Qualifier = 2
-	* Full Speed Configuration = 3
-	* High Speed Configuration = 4
-
-   Responses
-	* CY_RESP_USB_DESCRIPTOR
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_BAD_TYPE
-	* CY_RESP_SUCCESS_FAILURE:CY_ERR_BAD_INDEX
- */
-#define CY_RQT_GET_DESCRIPTOR (9)
-
-/* Summary
-   This request is sent from the P port processor to the
-   West Bridge device to physically configure the endpoints
-   in the device.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   3
-
-   MailBox0
-   * Context = 3
-   * Request Code = 10
-
-   D0
-	Bit 15 - Bit 8
-	  EP1OUTCFG register value
-	Bit 7 - Bit 0
-	  EP1INCFG register value
-
-   * D1 - D2 *
-   PEPxCFS register values where x = 3, 5, 7, 9
-
-   * D3 - D7 *
-   LEPxCFG register values where x = 3, 5, 7, 9, 10,
-	11, 12, 13, 14, 15
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_SET_USB_CONFIG_REGISTERS	(10)
-
-/* Summary
-   This request is sent to the P port processor when a
-   USB event occurs and needs to be relayed to the
-   P port.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 3
-   * Request Code = 11
-
-   D0
-   Event Type
-   * 0 = Reserved
-   * 1 = Reserved
-   * 2 = USB Suspend
-   * 3 = USB Resume
-   * 4 = USB Reset
-   * 5 = USB Set Configuration
-   * 6 = USB Speed change
-
-   D1
-   If EventTYpe is USB Speed change
-   * 0 = Full Speed
-   * 1 = High Speed
-
-   If EventType is USB Set Configuration
-   * The number of the configuration to use
-   * (may be zero to unconfigure)
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_USB_EVENT (11)
-
-/* Summary
-   This request is sent in both directions to transfer
-   endpoint data for endpoints 0 and 1.
-
-   Direction
-   West Bridge -> P Port Processor
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   Variable
-
-   Mailbox0
-   * Context = 3
-   * Request Code = 12
-
-   D0
-   Bit 15 - 14 Data Type
-   * 0 = Setup (payload should be the 8 byte setup packet)
-   * 1 = Data
-   * 2 = Status  (payload should be empty)
-
-	Bit 13 Endpoint Number (only 0 and 1 supported)
-	Bit 12 First Packet (only supported for Host ->
-	West Bridge traffic)
-	Bit 11 Last Packet (only supported for Host ->
-	West Bridge traffic)
-
-   Bit 9 - 0 Data Length (real max data length is 64 bytes
-   for EP0 and EP1)
-
-   *D1-Dn*
-   Endpoint data
-*/
-#define CY_RQT_USB_EP_DATA (12)
-
-
-/* Summary
-   This request sets the NAK bit on an endpoint.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Request Code = 13
-
-   D0
-   Endpoint Number
-
-   D1
-	* 1 = NAK Endpoint
-	* 0 = Clear NAK
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_INVALID_ENDPOINT
- */
-#define CY_RQT_ENDPOINT_SET_NAK	(13)
-
-
-/* Summary
-   This request retrieves the NAK config status of the
-   requested endpoint.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Request Code = 14
-
-   D0
-   Endpoint number
-
-   Responses
-	* CY_RESP_ENDPOINT_NAK
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_INVALID_ENDPOINT
- */
-#define CY_RQT_GET_ENDPOINT_NAK (14)
-
-/* Summary
-   This request acknowledges a setup packet that does not
-   require any data transfer.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox
-   * Context = 3
-   * Request Code = 15
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_ACK_SETUP_PACKET (15)
-
-/* Summary
-   This request is sent when the USB storage driver within
-   West Bridge receives an Inquiry request.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   x - variable
-
-   Mailbox0
-   * Context = 3
-   * Request Code = 16
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : Media type being addressed
-
-   D1
-   Bits 8	  : EVPD bit from request
-   Bits 0 - 7  : Codepage from the inquiry request
-
-   D2
-   Length of the inquiry response in bytes
-
-   * D3 - Dn *
-   The inquiry response
-
-   Description
-   When the West Bridge firmware receives an SCSI Inquiry
-   request from the USB host, the response to this mass
-   storage command is created by West Bridge and forwarded to
-   the P port processor.  The P port processor may change
-   this response before it is returned to the USB host. This
-   request is the method by which this may happen.
-*/
-#define CY_RQT_SCSI_INQUIRY_COMMAND (16)
-
-/* Summary
-   This request is sent when the USB storage driver within
-   West Bridge receives a Start/Stop request.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 3
-   * Request Code = 17
-
-   D0
-   Bits 12 - 15 : Bus index
-   Bits  8 - 11 : Zero based device index
-   Bits  0 -  7 : Media type being addressed
-
-   D1
-   Bit 1
-   * LoEj Bit (See SCSI-3 specification)
-
-   Bit 0
-   * Start Bit (See SCSI-3 specification)
-
-   Description
-   When the West Bridge firmware received a SCSI Start/Stop
-   request from the USB host, this request is relayed to the
-   P port processor. This request is used to relay the command.
-   The USB firmware will not response to the USB command until
-   the response to this request is recevied by the firmware.
-*/
-#define CY_RQT_SCSI_START_STOP_COMMAND	(17)
-
-/* Summary
-   This request is sent when the USB storage driver
-   receives an unknown CBW on mass storage.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   4
-
-   Mailbox0
-   * Context = 3
-   * Request Code = 18
-
-   D0
-   Bits 12 - 15 : MediaType
-	* 0 = NAND
-	* 1 = SDIO Flash
-	* 2 = MMC Flash
-	* 3 = CE-ATA
-
-   D1
-   The length of the request in bytes
-
-   D2 - Dn
-   CBW command block from the SCSI host controller.
-
-   Description
-   When the firmware recevies a SCSI request that is not
-   understood, this request is relayed to the
-   P port processor.
-*/
-#define CY_RQT_SCSI_UNKNOWN_COMMAND	(18)
-
-/* Summary
-   Request the West Bridge to signal remote wakeup
-   to the USB host.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 3
-   * Request code = 19
-
-   Description
-   Request from the processor to West Bridge, to signal
-   remote wakeup to the USB host.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_USB_REMOTE_WAKEUP	 (19)
-
-/* Summary
-   Request the West Bridge to clear all descriptors tha
-    were set previously
-   using the Set Descriptor calls.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 3
-   * Request code = 20
-
-   Description
-   Request from the processor to West Bridge, to clear
-   all descriptor information that was previously stored
-   on the West Bridge using CyAnUsbSetDescriptor calls.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_CLEAR_DESCRIPTORS (20)
-
-/* Summary
-   Request the West Bridge to monitor USB to storage activity
-   and send periodic updates.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   2
-
-   Mailbox0
-   * Context = 3
-   * Request code = 21
-
-   D0
-   Upper 16 bits of write threshold
-
-   D1
-   Lower 16 bits of write threshold
-
-   D2
-   Upper 16 bits of read threshold
-
-   D3
-   Lower 16 bits of read threshold
-
-   Description
-   Request from the processor to West Bridge, to start
-   monitoring the level of read/write activity on the
-   USB mass storage drive and to set the threshold
-   level at which progress reports are sent.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_USB_STORAGE_MONITOR	(21)
-
-/* Summary
-   Event from the West Bridge showing that U2S activity
-   since the last event has crossed the threshold.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   2
-
-   Mailbox0
-   * Context = 3
-   * Request code = 22
-
-   D0
-   Upper 16 bits of sectors written since last event.
-
-   D1
-   Lower 16 bits of sectors written since last event.
-
-   D2
-   Upper 16 bits of sectors read since last event.
-
-   D3
-   Lower 16 bits of sectors read since last event.
-
-   Description
-   Event notification from the West Bridge indicating
-   that the number of read/writes on the USB mass
-   storage device have crossed a pre-defined threshold
-   level.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_USB_ACTIVITY_UPDATE	(22)
-
-/* Summary
-   Request to select the partitions to be enumerated on a
-   storage device with partitions.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 3
-   * Request code = 23
-
-   D0
-   Bits 8-15 : Bus index
-   Bits 0- 7 : Device index
-
-   D1
-   Bits 8-15 : Control whether to enumerate partition 1.
-   Bits 0- 7 : Control whether to enumerate partition 0.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE
- */
-#define CY_RQT_MS_PARTITION_SELECT	(23)
-
-/************/
-
-/*@@USB responses
-   Summary
-   The USB responses include:
-   * CY_RESP_USB_CONFIG
-   * CY_RESP_ENDPOINT_CONFIG
-   * CY_RESP_ENDPOINT_STALL
-   * CY_RESP_CONNECT_STATE
-   * CY_RESP_USB_DESCRIPTOR
-   * CY_RESP_USB_INVALID_EVENT
-   * CY_RESP_ENDPOINT_NAK
-   * CY_RESP_INQUIRY_DATA
-   * CY_RESP_UNKNOWN_SCSI_COMMAND
- */
-
-/* Summary
-   This response contains the enumeration configuration
-   information for the USB module.
-
-   Direction
-   8051->P
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Response Code = 32
-
-   D0
-   Bits 8 - 15: Media to enumerate (bit mask)
-   Bits 0 -  7: Buses to enumerate (bit mask)
-	* 1 = Bus 0
-	* 2 = Bus 1
-
-   D1
-   Enumeration Methodology
-	* 0 = West Bridge enumeration
-	* 1 = P Port enumeration
-
-   D2
-   Bits 7 - 0  : Interface Count - the number of interfaces
-   Bits 15 - 8 : Mass storage callbacks
-
- */
-#define CY_RESP_USB_CONFIG (32)
-
-
-/* Summary
-   This response contains the configuration information
-   for the specified endpoint.
-
-   Direction
-   8051->P
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Response Code = 33
-
-   D0
-   Bits 15 - 12 : Endpoint Number (0 - 15)
-
-   Bits 11 - 10 : Endpoint Type
-	* 0 = Control
-	* 1 = Bulk
-	* 2 = Interrupt
-	* 3 = Isochronous
-
-   Bits 9 : Endpoint Size
-	* 0 = 512
-	* 1 = 1024
-
-   Bits 8 - 7 : Buffering
-	* 0 = Double
-	* 1 = Triple
-	* 2 = Quad
-
-   Bits 6 : Bit Direction
-	* 0 = Input
-	* 1 = Output
- */
-#define CY_RESP_ENDPOINT_CONFIG (33)
-
-
-/* Summary
-   This response contains the stall status for
-   the specified endpoint.
-
-   Direction
-   8051->P
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Response Code = 34
-
-   D0
-   Stall status
-	* 0 = Active
-	* 1 = Stalled
- */
-#define CY_RESP_ENDPOINT_STALL (34)
-
-
-/* Summary
-   This response contains the connected/disconnected
-   state of the West Bridge USB pins.
-
-   Direction
-   8051->P
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 3
-	* Response Code = 35
-
-   D0
-   Connect state
-	* 0 = Disconnected
-	* 1 = Connected
- */
-#define CY_RESP_CONNECT_STATE (35)
-
-/* Summary
-   This response contains the information
-   about the USB configuration
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length
-   x bytes
-
-   Mailbox0
-   * Context = 3
-   * Response Code = 36
-
-   D0
-   Length in bytes of the descriptor
-
-   * D1 - DN *
-   Descriptor contents
-*/
-#define CY_RESP_USB_DESCRIPTOR (36)
-
-/* Summary
-   This response is sent in response to a bad USB event code
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length
-   1 word (2 bytes)
-
-   Mailbox0
-   * Context = 3
-   * Response Code = 37
-
-   D0
-   The invalid event code in the request
-*/
-#define CY_RESP_USB_INVALID_EVENT	(37)
-
-/* Summary
-   This response contains the current NAK status of
-   a USB endpoint.
-
-   Direction
-   West Bridge -> P port processor
-
-   Length
-   1 transfer
-
-   Mailbox0
-   * Context = 3
-   * Response Code = 38
-
-   D0
-   The NAK status of the endpoint
-   1 : NAK bit set
-   0 : NAK bit clear
-*/
-#define CY_RESP_ENDPOINT_NAK (38)
-
-/* Summary
-   This response gives the contents of the inquiry
-   data back to West Bridge to returns to the USB host.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length
-   Variable
-
-   MailBox0
-   * Context = 3
-   * Response Code = 39
-
-   D0
-   Length of the inquiry response
-
-   *D1 - Dn*
-   Inquiry data
-*/
-#define CY_RESP_INQUIRY_DATA (39)
-
-/* Summary
-   This response gives the status of an unknown SCSI command.
-   This also gives three bytes of sense information.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 3
-   * Response Code = 40
-
-   D0
-   The length of the reply in bytes
-
-   D1
-   * Status of the command
-   * Sense Key
-
-   D2
-   * Additional Sense Code (ASC)
-   * Additional Sense Code Qualifier (ASCQ)
-*/
-#define CY_RESP_UNKNOWN_SCSI_COMMAND (40)
-/*******************************************************/
-
-/*@@Turbo requests
-   Summary
-   The Turbo requests include:
-	* CY_RQT_START_MTP
-	* CY_RQT_STOP_MTP
-	* CY_RQT_INIT_SEND_OBJECT
-	* CY_RQT_CANCEL_SEND_OBJECT
-	* CY_RQT_INIT_GET_OBJECT
-	* CY_RQT_CANCEL_GET_OBJECT
-	* CY_RQT_SEND_BLOCK_TABLE
-	* CY_RQT_MTP_EVENT
-	* CY_RQT_TURBO_CMD_FROM_HOST
-	* CY_RQT_TURBO_SEND_RESP_DATA_TO_HOST
-	* CY_RQT_TURBO_SWITCH_ENDPOINT
-	* CY_RQT_TURBO_START_WRITE_DMA
-	* CY_RQT_ENABLE_USB_PATH
-	* CY_RQT_CANCEL_ASYNC_TRANSFER
- */
-#ifndef __doxygen__
-#define CY_RQT_TUR_RQT_CONTEXT (4)
-#endif
-
-/* Summary
-   This command requests initialization of the MTP stack.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 4
-	* Request Code = 0
-
-   Description
-   This command is required before any other MTP related
-   command can be sent to the West Bridge firmware.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-   * CY_RESP_SUCCESS_FAILURE:CY_RESP_ALREADY_RUNNING
- */
-#define CY_RQT_START_MTP (0)
-
-/* Summary
-   This command requests shutdown of the MTP stack.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 4
-	* Request Code = 1
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_NOT_RUNNING
- */
-#define CY_RQT_STOP_MTP (1)
-
-/* Summary
-   This command sets up an MTP SendObject operation.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 4
-	* Request Code = 2
-
-   D0
-   Total bytes for send object Low 16 bits
-
-   D1
-   Total bytes for send object High 16 bits
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_NOT_RUNNING
- */
-#define CY_RQT_INIT_SEND_OBJECT (2)
-
-/* Summary
-   This command cancels West Bridges handling of
-   an ongoing MTP SendObject operation. This
-   does NOT send an MTP response.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 4
-	* Request Code = 3
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_NOT_RUNNING
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_NO_OPERATION_PENDING
- */
-#define CY_RQT_CANCEL_SEND_OBJECT (3)
-
-/* Summary
-   This command sets up an MTP GetObject operation.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   2
-
-   MailBox0
-	* Context = 4
-	* Request Code = 4
-
-   D0
-   Total bytes for get object Low 16 bits
-
-   D1
-   Total bytes for get object High 16 bits
-
-   D2
-   Transaction Id for get object Low 16 bits
-
-   D3
-   Transaction Id for get object High 16 bits
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_NOT_RUNNING
- */
-#define CY_RQT_INIT_GET_OBJECT (4)
-
-/* Summary
-   This command notifies West Bridge of a new
-   BlockTable transfer.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 4
-	* Request Code = 5
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_NOT_RUNNING
- */
-#define CY_RQT_SEND_BLOCK_TABLE (5)
-
-/* Summary
-   This request is sent to the P port processor when a MTP event occurs
-   and needs to be relayed to the P port.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   2
-
-   Mailbox0
-   * Context = 4
-   * Request Code = 6
-
-   D0
-   Bits 15 - 8 : Return Status for GetObject/SendObject
-   Bits 7 - 0  : Event Type
-   * 0 = MTP SendObject Complete
-   * 1 = MTP GetObject Complete
-   * 2 = BlockTable Needed
-
-   D1
-   Lower 16 bits of the length of the data that got transferred
-   in the Turbo Endpoint.(Applicable to "MTP SendObject Complete"
-   and "MTP GetObject Complete" events)
-
-   D2
-   Upper 16 bits of the length of the data that got transferred
-   in the Turbo Endpoint. (Applicable to "MTP SendObject Complete"
-   and "MTP GetObject Complete" events)
-
-   D3
-   Lower 16 bits of the Transaction Id of the MTP_SEND_OBJECT
-   command. (Applicable to "MTP SendObject Complete" event)
-
-   D4
-   Upper 16 bits of the Transaction Id of the MTP_SEND_OBJECT
-   command. (Applicable to "MTP SendObject Complete" event)
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_MTP_EVENT (6)
-
-/* Summary
-   This request is sent to the P port processor when a command
-   is received from Host in a Turbo Endpoint. Upon receiving
-   this event, P port should read the data from the endpoint as
-   soon as possible.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 4
-   * Request Code = 7
-
-   D0
-   This contains the EP number. (This will be always two now).
-
-   D1
-   Length of the data available in the Turbo Endpoint.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_TURBO_CMD_FROM_HOST  (7)
-
-/* Summary
-   This request is sent to the West Bridge when the P port
-   needs to send data to the Host in a Turbo Endpoint.
-   Upon receiving this event, Firmware will make the end point
-   available for the P port. If the length is zero, then
-   firmware will send a zero length packet.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   2
-
-   Mailbox0
-   * Context = 4
-   * Request Code = 8
-
-   D0
-   This contains the EP number. (This will be always six now).
-
-   D1
-	Lower 16 bits of the length of the data that needs to be
-	sent in the Turbo Endpoint.
-
-   D2
-	Upper 16 bits of the length of the data that needs to be
-	sent in the Turbo Endpoint.
-
-   Responses
-   * CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-*/
-#define CY_RQT_TURBO_SEND_RESP_DATA_TO_HOST	(8)
-
-/* Summary
-   This command cancels West Bridges handling of
-   an ongoing MTP GetObject operation. This
-   does NOT send an MTP response.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 4
-	* Request Code = 9
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_NOT_RUNNING
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_NO_OPERATION_PENDING
- */
-#define CY_RQT_CANCEL_GET_OBJECT (9)
-
-/* Summary
-   This command switches a Turbo endpoint
-   from the U port to the P port. If no data
-   is in the endpoint the endpoint is
-   primed to switch as soon as data is placed
-   in the endpoint. The endpoint will continue
-   to switch until all data has been transferd.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   2
-
-   MailBox0
-	* Context = 4
-	* Request Code = 10
-
-   D0
-   Whether the read is a packet read.
-
-   D1
-	Lower 16 bits of the length of the data to switch
-	the Turbo Endpoint for.
-
-   D2
-	Upper 16 bits of the length of the data to switch
-	the Turbo Endpoint for.
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
-	* CY_RESP_SUCCESS_FAILURE:CY_RESP_NOT_RUNNING
- */
-#define CY_RQT_TURBO_SWITCH_ENDPOINT (10)
-
-/* Summary
-   This command requests the API to start the DMA
-   transfer of a packet of MTP data to the Antioch.
-
-   Direction
-   West Bridge -> P Port Processor
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 4
-	* Request Code = 11
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
- */
-#define CY_RQT_TURBO_START_WRITE_DMA (11)
-
-/* Summary
-   This command requests the firmware to switch the
-   internal data paths to enable USB access to the
-   Mass storage / MTP endpoints.
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   MailBox0
-	* Context = 4
-	* Request code = 12
-
-   Responses
-	* CY_RESP_SUCCESS_FAILURE:CY_AS_ERROR_SUCCESS
- */
-#define CY_RQT_ENABLE_USB_PATH	(12)
-
-/* Summary
-   Request to cancel an asynchronous MTP write from
-   the processor side.
-
-   Direction
-   P Port processor -> West Bridge
-
-   Length (in transfers)
-   1
-
-   Mailbox0
-   * Context = 4
-   * Request code = 13
-
-   D0
-   * EP number
-
-   Description
-   This is a request to the firmware to update internal
-   state so that a pending write on the MTP endpoint
-   can be cancelled.
- */
-#define CY_RQT_CANCEL_ASYNC_TRANSFER (13)
-
-/******************************************************/
-
-/*@@Turbo responses
-   Summary
-   The Turbo responses include:
-   * CY_RESP_MTP_INVALID_EVENT
- */
-
-/* Summary
-   This response is sent in response to a bad MTP event code
-
-   Direction
-   P Port Processor -> West Bridge
-
-   Length
-   1 word (2 bytes)
-
-   Mailbox0
-   * Context = 4
-   * Response Code = 16
-
-   D0
-   The invalid event code in the request
-*/
-#define CY_RESP_MTP_INVALID_EVENT (16)
-
-#ifndef __doxygen__
-#define CY_RQT_CONTEXT_COUNT (5)
-#endif
-
-#endif			/* _INCLUDED_CYASPROTOCOL_H_ */
-
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasregs.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasregs.h
deleted file mode 100644
index f049d7e32a4b..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasregs.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/* Cypress West Bridge API header file (cyasregs.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASREG_H_
-#define _INCLUDED_CYASREG_H_
-
-#if !defined(__doxygen__)
-
-#define CY_AS_MEM_CM_WB_CFG_ID (0x80)
-#define		CY_AS_MEM_CM_WB_CFG_ID_VER_MASK	(0x000F)
-#define		CY_AS_MEM_CM_WB_CFG_ID_HDID_MASK (0xFFF0)
-#define		CY_AS_MEM_CM_WB_CFG_ID_HDID_ANTIOCH_VALUE (0xA100)
-#define		CY_AS_MEM_CM_WB_CFG_ID_HDID_ASTORIA_FPGA_VALUE (0x6800)
-#define		CY_AS_MEM_CM_WB_CFG_ID_HDID_ASTORIA_VALUE (0xA200)
-
-
-#define CY_AS_MEM_RST_CTRL_REG (0x81)
-#define		CY_AS_MEM_RST_CTRL_REG_HARD (0x0003)
-#define		CY_AS_MEM_RST_CTRL_REG_SOFT (0x0001)
-#define		CY_AS_MEM_RST_RSTCMPT (0x0004)
-
-#define CY_AS_MEM_P0_ENDIAN	(0x82)
-#define		CY_AS_LITTLE_ENDIAN	(0x0000)
-#define		CY_AS_BIG_ENDIAN (0x0101)
-
-#define CY_AS_MEM_P0_VM_SET	(0x83)
-#define		CY_AS_MEM_P0_VM_SET_VMTYPE_MASK (0x0007)
-#define		CY_AS_MEM_P0_VM_SET_VMTYPE_RAM (0x0005)
-#define		CY_AS_MEM_P0_VM_SET_VMTYPE_SRAM	(0x0007)
-#define		CY_AS_MEM_P0_VM_SET_VMTYPE_VMWIDTH (0x0008)
-#define		CY_AS_MEM_P0_VM_SET_VMTYPE_FLOWCTRL (0x0010)
-#define		CY_AS_MEM_P0_VM_SET_IFMODE (0x0020)
-#define		CY_AS_MEM_P0_VM_SET_CFGMODE (0x0040)
-#define		CY_AS_MEM_P0_VM_SET_DACKEOB (0x0080)
-#define		CY_AS_MEM_P0_VM_SET_OVERRIDE (0x0100)
-#define		CY_AS_MEM_P0_VM_SET_INTOVERD (0x0200)
-#define		CY_AS_MEM_P0_VM_SET_DRQOVERD (0x0400)
-#define		CY_AS_MEM_P0_VM_SET_DRQPOL (0x0800)
-#define		CY_AS_MEM_P0_VM_SET_DACKPOL	(0x1000)
-
-
-#define CY_AS_MEM_P0_NV_SET	(0x84)
-#define		CY_AS_MEM_P0_NV_SET_WPSWEN	(0x0001)
-#define		CY_AS_MEM_P0_NV_SET_WPPOLAR	(0x0002)
-
-#define CY_AS_MEM_PMU_UPDATE (0x85)
-#define		CY_AS_MEM_PMU_UPDATE_UVALID (0x0001)
-#define		CY_AS_MEM_PMU_UPDATE_USBUPDATE (0x0002)
-#define		CY_AS_MEM_PMU_UPDATE_SDIOUPDATE (0x0004)
-
-#define CY_AS_MEM_P0_INTR_REG (0x90)
-#define		CY_AS_MEM_P0_INTR_REG_MCUINT (0x0020)
-#define		CY_AS_MEM_P0_INTR_REG_DRQINT (0x0800)
-#define		CY_AS_MEM_P0_INTR_REG_MBINT	(0x1000)
-#define		CY_AS_MEM_P0_INTR_REG_PMINT (0x2000)
-#define		 CY_AS_MEM_P0_INTR_REG_PLLLOCKINT (0x4000)
-
-#define CY_AS_MEM_P0_INT_MASK_REG (0x91)
-#define		CY_AS_MEM_P0_INT_MASK_REG_MMCUINT (0x0020)
-#define		CY_AS_MEM_P0_INT_MASK_REG_MDRQINT (0x0800)
-#define		CY_AS_MEM_P0_INT_MASK_REG_MMBINT (0x1000)
-#define		CY_AS_MEM_P0_INT_MASK_REG_MPMINT (0x2000)
-#define		 CY_AS_MEM_P0_INT_MASK_REG_MPLLLOCKINT (0x4000)
-
-#define CY_AS_MEM_MCU_MB_STAT (0x92)
-#define		CY_AS_MEM_P0_MCU_MBNOTRD (0x0001)
-
-#define CY_AS_MEM_P0_MCU_STAT (0x94)
-#define		CY_AS_MEM_P0_MCU_STAT_CARDINS (0x0001)
-#define		CY_AS_MEM_P0_MCU_STAT_CARDREM (0x0002)
-
-#define CY_AS_MEM_PWR_MAGT_STAT	(0x95)
-#define		CY_AS_MEM_PWR_MAGT_STAT_WAKEUP (0x0001)
-
-#define CY_AS_MEM_P0_RSE_ALLOCATE (0x98)
-#define		CY_AS_MEM_P0_RSE_ALLOCATE_SDIOAVI (0x0001)
-#define		CY_AS_MEM_P0_RSE_ALLOCATE_SDIOALLO (0x0002)
-#define		CY_AS_MEM_P0_RSE_ALLOCATE_NANDAVI (0x0004)
-#define		CY_AS_MEM_P0_RSE_ALLOCATE_NANDALLO (0x0008)
-#define		CY_AS_MEM_P0_RSE_ALLOCATE_USBAVI (0x0010)
-#define		CY_AS_MEM_P0_RSE_ALLOCATE_USBALLO (0x0020)
-
-#define CY_AS_MEM_P0_RSE_MASK				(0x9A)
-#define		CY_AS_MEM_P0_RSE_MASK_MSDIOBUS_RW (0x0003)
-#define		CY_AS_MEM_P0_RSE_MASK_MNANDBUS_RW (0x00C0)
-#define		CY_AS_MEM_P0_RSE_MASK_MUSBBUS_RW (0x0030)
-
-#define CY_AS_MEM_P0_DRQ (0xA0)
-#define		CY_AS_MEM_P0_DRQ_EP2DRQ	(0x0004)
-#define		CY_AS_MEM_P0_DRQ_EP3DRQ	(0x0008)
-#define		CY_AS_MEM_P0_DRQ_EP4DRQ	(0x0010)
-#define		CY_AS_MEM_P0_DRQ_EP5DRQ	(0x0020)
-#define		CY_AS_MEM_P0_DRQ_EP6DRQ	(0x0040)
-#define		CY_AS_MEM_P0_DRQ_EP7DRQ	(0x0080)
-#define		CY_AS_MEM_P0_DRQ_EP8DRQ	(0x0100)
-#define		CY_AS_MEM_P0_DRQ_EP9DRQ	(0x0200)
-#define		CY_AS_MEM_P0_DRQ_EP10DRQ (0x0400)
-#define		CY_AS_MEM_P0_DRQ_EP11DRQ (0x0800)
-#define		CY_AS_MEM_P0_DRQ_EP12DRQ (0x1000)
-#define		CY_AS_MEM_P0_DRQ_EP13DRQ (0x2000)
-#define		CY_AS_MEM_P0_DRQ_EP14DRQ (0x4000)
-#define		CY_AS_MEM_P0_DRQ_EP15DRQ (0x8000)
-
-#define CY_AS_MEM_P0_DRQ_MASK (0xA1)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP2DRQ (0x0004)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP3DRQ (0x0008)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP4DRQ (0x0010)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP5DRQ (0x0020)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP6DRQ (0x0040)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP7DRQ (0x0080)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP8DRQ (0x0100)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP9DRQ (0x0200)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP10DRQ (0x0400)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP11DRQ (0x0800)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP12DRQ (0x1000)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP13DRQ (0x2000)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP14DRQ	(0x4000)
-#define		CY_AS_MEM_P0_DRQ_MASK_MEP15DRQ	(0x8000)
-
-#define CY_AS_MEM_P0_EP2_DMA_REG (0xA2)
-#define		CY_AS_MEM_P0_E_pn_DMA_REG_COUNT_MASK (0x7FF)
-#define		CY_AS_MEM_P0_E_pn_DMA_REG_DMAVAL (1 << 12)
-#define CY_AS_MEM_P0_EP3_DMA_REG (0xA3)
-#define CY_AS_MEM_P0_EP4_DMA_REG (0xA4)
-#define CY_AS_MEM_P0_EP5_DMA_REG (0xA5)
-#define CY_AS_MEM_P0_EP6_DMA_REG (0xA6)
-#define CY_AS_MEM_P0_EP7_DMA_REG (0xA7)
-#define CY_AS_MEM_P0_EP8_DMA_REG (0xA8)
-#define CY_AS_MEM_P0_EP9_DMA_REG (0xA9)
-#define CY_AS_MEM_P0_EP10_DMA_REG (0xAA)
-#define CY_AS_MEM_P0_EP11_DMA_REG (0xAB)
-#define CY_AS_MEM_P0_EP12_DMA_REG (0xAC)
-#define CY_AS_MEM_P0_EP13_DMA_REG (0xAD)
-#define CY_AS_MEM_P0_EP14_DMA_REG (0xAE)
-#define CY_AS_MEM_P0_EP15_DMA_REG (0xAF)
-
-#define CY_AS_MEM_IROS_SLB_DATARET (0xC0)
-
-#define CY_AS_MEM_IROS_IO_CFG (0xC1)
-#define	 CY_AS_MEM_IROS_IO_CFG_GPIODRVST_MASK (0x0003)
-#define		CY_AS_MEM_IROS_IO_CFG_GPIOSLEW_MASK (0x0004)
-#define	 CY_AS_MEM_IROS_IO_CFG_PPIODRVST_MASK (0x0018)
-#define	 CY_AS_MEM_IROS_IO_CFG_PPIOSLEW_MASK (0x0020)
-#define		CY_AS_MEM_IROS_IO_CFG_SSIODRVST_MASK (0x0300)
-#define	 CY_AS_MEM_IROS_IO_CFG_SSIOSLEW_MASK (0x0400)
-#define	 CY_AS_MEM_IROS_IO_CFG_SNIODRVST_MASK (0x1800)
-#define		CY_AS_MEM_IROS_IO_CFG_SNIOSLEW_MASK (0x2000)
-
-#define CY_AS_MEM_IROS_PLL_CFG (0xC2)
-
-#define CY_AS_MEM_IROS_PXB_DATARET (0xC3)
-
-#define CY_AS_MEM_PLL_LOCK_LOSS_STAT (0xC4)
-#define		 CY_AS_MEM_PLL_LOCK_LOSS_STAT_PLLSTAT (0x0800)
-
-#define CY_AS_MEM_IROS_SLEEP_CFG (0xC5)
-
-#define CY_AS_MEM_PNAND_CFG	 (0xDA)
-#define CY_AS_MEM_PNAND_CFG_IOWIDTH_MASK (0x0001)
-#define CY_AS_MEM_PNAND_CFG_IOWIDTH_8BIT (0x0000)
-#define CY_AS_MEM_PNAND_CFG_IOWIDTH_16BIT (0x0001)
-#define CY_AS_MEM_PNAND_CFG_BLKTYPE_MASK (0x0002)
-#define CY_AS_MEM_PNAND_CFG_BLKTYPE_SMALL (0x0002)
-#define CY_AS_MEM_PNAND_CFG_BLKTYPE_LARGE (0x0000)
-#define CY_AS_MEM_PNAND_CFG_EPABYTE_POS	(4)
-#define CY_AS_MEM_PNAND_CFG_EPABYTE_MASK (0x0030)
-#define CY_AS_MEM_PNAND_CFG_EPABIT_POS	(6)
-#define CY_AS_MEM_PNAND_CFG_EPABIT_MASK	(0x00C0)
-#define CY_AS_MEM_PNAND_CFG_LNAEN_MASK	(0x0100)
-
-#define CY_AS_MEM_P0_MAILBOX0	(0xF0)
-#define CY_AS_MEM_P0_MAILBOX1	(0xF1)
-#define CY_AS_MEM_P0_MAILBOX2	(0xF2)
-#define CY_AS_MEM_P0_MAILBOX3	(0xF3)
-
-#define CY_AS_MEM_MCU_MAILBOX0	(0xF8)
-#define CY_AS_MEM_MCU_MAILBOX1	(0xF9)
-#define CY_AS_MEM_MCU_MAILBOX2	(0xFA)
-#define CY_AS_MEM_MCU_MAILBOX3	(0xFB)
-
-#endif				/* !defined(__doxygen__) */
-
-#endif				/* _INCLUDED_CYASREG_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h
deleted file mode 100644
index 52b93c3e4813..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h
+++ /dev/null
@@ -1,2759 +0,0 @@
-/* Cypress West Bridge API header file (cyasstorage.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASSTORAGE_H_
-#define _INCLUDED_CYASSTORAGE_H_
-
-#include "cyasmedia.h"
-#include "cyasmisc.h"
-#include "cyas_cplus_start.h"
-
-
-/*@@Storage APIs
-  Summary
-  This section documents the storage APIs supported by the
-  West Bridge API.
-
-  Description
-  The storage API is based on some specific concepts which
-  are referenced here.
-  * <LINK Storage API Overview>
-  * Addressing
-  * Ownership
-  * <LINK Asynchronous Versus Synchronous Operation>
-*/
-
-/*@@Storage API Overview
-  Summary
-  Storage devices are identified by media type. Each media
-  type is considered a  single logical device.
-
-  Description
-  Each media type has a consistent block size and consists
-  of a set of logical blocks numbered from 0 to N - 1 where
-  N is the size of the
-  media type in blocks. The mass storage APIs defined below
-  provide the
-  capability to query for devices that are present, and
-  read/write data to/from
-  these devices.
-*/
-
-/*@@Addressing
-  Summary
-  Blocks within a storage device are address by a hierarchal
-  block address.  This
-  address consists of the bus number, physical device,
-   logical unit, and finally
-  block address.
-
-  Description
-  While currently only a single device of each media type
-  is supported, the address
-  space reserves space in the future for multiple devices
-  of each type.  Therefore
-  the second element of the address is the specific device
-  being addressed within
-  a given device type.  For this release of the software,
-  this value will always be
-  zero to address the first device.
-
-  The third element of the address is the logical unit.
-  A device being managed
-  by West Bridge can be partitioned into multiple logical
-  units.  This partition
-  information is stored on each device itself.  Currently,
-  one of the storage devices
-  managed by West Bridge can be partitioned into two
-  logical units.
-
-  Finally a logical block address is given within the
-  logical unit to address an
-  individual block.
-*/
-
-/*@@Ownership
-  Summary
-  While West Bridge supports concurrent block level
-  operations from both the USB port and
-  the processor port, this is not desirable in most
-  situations as the file system
-  contained on the storage media cannot be accessed
-  concurrently.  To insure access
-  by only one of USB and the processor, the West Bridge
-  API provides for ownership of storage
-  devices based on media type.
-
-  Description
-  The processor requests ownership of a given media type
-  by calling CyAsStorageClaim().
-  The firmware in West Bridge releases control of the
-  media and signals the processor through
-  the event callback registered with
-  CyAsStorageRegisterCallback().  The specific event is
-  the CyAsStorageProcessor. The processor can later
-  release the media via a call to
-  CyAsStorageRelease().  This call is immediate and
-  no callback is required.
-
-  If the processor has claimed storage and the USB port
-  is connected, West Bridge will need to
-  claim the storage to manage the mass storage device.
-  West Bridge requests the storage through
-  the event callback registered with
-  CyAsStorageRegisterCallback().  The specific event is
-  CyAsStorageAntioch and is named as such to reflect
-  the USB view of storage.  This callback
-  is a request for the processor to release storage.
-  The storage is not actually released
-  until the processor calls CyAsStorageRelease().
-
-  Note that the CyAsStorageAntioch is only sent when the
-  USB storage device is enumerated and
-  NOT at every USB operation.  The ownership of a given
-  storage media type is assumed to belong
-  to the processor until the USB connection is established.
-  At that point, the storage ownership
-  is transferred to West Bridge.  After the USB connection
-  is broken, ownership can be transferred
-  back to the processor.
-*/
-
-/*@@Asynchronous Versus Synchronous Operation
-  Summary
-  When read or write operations are performed to the
-  storage devices, these operations may be
-  synchronous or asynchronous.  A synchronous operation
-  is an operation where the read or write
-  operation is requested and the function does not return
-  until the operation is complete.  This
-  type of function is the easiest to use but does not
-  provide for optimal usage of the P port processor time.
-
-  Description
-  An asynchronous operation is one where the function returns
-  as soon as the request is started.
-  The specific read and write request will complete at some
-  time in the future and the P port
-  processor will be notified via a callback function.  While
-  asynchronous functions provide for
-  much better usage of the CPU, these function have more
-  stringent requirements for use.  First,
-  any buffer use for data transfer must be valid from the
-  function call to request the operation
-  through when the callback function is called.  This basically
-  implies that stack based buffers
-  are not acceptable for asynchronous calls.  Second, error
-  handling must be deferred until the
-  callback function is called indicating any kind of error
-  that may have occurred.
-*/
-
-/*@@Partitioning
-  Summary
-  West Bridge API and firmware support the creation of up to
-  two logical partitions on one
-  of the storage devices that are managed by West Bridge.  The
-  partitions are managed through
-  the CyAsStorageCreatePPartition and CyAsStorageRemovePPartition
-  APIs.
-
-  Description
-  The CyAsStorageCreatePPartition API is used to divide the total
-  storage on a storage
-  device into two logical units or partitions.  Since the partition
-  information is stored
-  on the storage device in a custom format, partitions should
-  only be created on fixed
-  storage devices (i.e., no removable SD/MMC cards).  Any data
-  stored on the device
-  before the creation of the partition, is liable to be lost when
-  a partition is created.
-
-  The CyAsStorageRemovePPartition API is used to remove the
-  stored partition information,
-  so that all of the device's capacity is treated as a single
-  partition again.
-
-  When a storage device with two partitions (units) is being
-  enumerated as a mass storage
-  device through the West Bridge, it is possible to select the
-  partitions to be made
-  visible to the USB host.  This is done through the
-  CyAsUsbSelectMSPartitions API.
-*/
-
-/*********************************
- * West Bridge Constants
- **********************************/
-
-/* Summary
-   This constants indicates a raw device access to the read/write
-   functions
-
-   Description
-   When performing reading and writing operations on the
-   storage devices attached
-   to West Bridge, there are cases where writes need to
-   happen to raw devices, versus
-   the units contained within a device.  This is
-   specifically required to manage
-   the partitions within physical devices.  This constant
-   is used in calls to
-   CyAsStorageRead(), CyAsStorageReadAsync(),
-   CyAsStorageWrite() and
-   CyAsStorageWriteAsync(), to indicate that the raw
-   physical device is being
-   accessed and not any specific unit on the device.
-
-   See Also
-   * CyAsStorageRead
-   * CyAsStorageReadAsync
-   * CyAsStorageWrite
-   * CyAsStorageWriteAsync
-*/
-#define CY_AS_LUN_PHYSICAL_DEVICE (0xffffffff)
-
-/* Summary
-   This constant represents the maximum DMA burst length
-   supported on a storage endpoint
-
-   Description
-   West Bridge reserves separate endpoints for accessing
-   storage media through the
-   CyAsStorageRead() and CyAsStorageWrite() calls. The
-   maximum size of these
-   endpoints is always 512 bytes, regardless of status
-   and speed of the USB
-   connection.
-*/
-#define CY_AS_STORAGE_EP_SIZE (512)
-
-/********************************
- * West Bridge Types
- *******************************/
-
-/* Summary
-   This type indicates the type of event in an event
-   callback from West Bridge
-
-   Description
-   At times West Bridge needs to inform the P port
-   processor of events that have
-   occurred.  These events are asynchronous to the
-   thread of control on the P
-   port processor and as such are generally delivered
-   via a callback function that
-   is called as part of an interrupt handler.  This
-   type indicates the resonse for
-   the call to the callback function.
-
-   See Also
-   * CyAsStorageEventCallback
-   * CyAsStorageRegisterCallback
-*/
-typedef enum cy_as_storage_event {
-	/*  This event occurs when the West Bridge device has
-	detected a USB connect and has enumerated the
-	storage controlled by west bridge to the USB port.
-	this event is the signal that the processor
-	needs to release the storage media. west bridge will
-	not have control of the storage media until the
-	processor calls cy_as_release_storage() to release
-	the specific media. */
-	cy_as_storage_antioch,
-
-	/*  This event occurs when the processor has requested
-	ownership of a given media type and west bridge has
-	released the media.  this event is an indicator
-	that the transfer of ownership is complete and the
-	processor now owns the given media type. */
-	cy_as_storage_processor,
-
-	/*  This event occurs when a removable media type has
-	been removed. */
-	cy_as_storage_removed,
-
-	/*  This event occurs when a removable media type has
-		been inserted. */
-	cy_as_storage_inserted,
-
-	/* This event occurs when the West Bridge device
-	 * percieves an interrrupt from an SDIO card */
-	cy_as_sdio_interrupt
-
-} cy_as_storage_event;
-
-/* Summary
-   This type gives the type of the operation in a storage
-   operation callback
-
-   Description
-   This type is used in the callback function for asynchronous
-   operation.  This type indicates whether it is a
-   CyAsStorageRead() or CyAsStorageWrite() operation that
-   has completed.
-
-   See Also
-   * <LINK Asynchronous Versus Synchronous Operation>
-   * CyAsStorageRead
-   * CyAsStorageWrite
-*/
-typedef enum cy_as_oper_type {
-	/* A data read operation */
-	cy_as_op_read,
-	/* A data write operation */
-	cy_as_op_write
-} cy_as_oper_type;
-
-/* Summary
-   This data structure describes a specific type of media
-
-   Description
-   This data structure is the return value from the
-   CyAsStorageQueryDevice function.  This structure provides
-   information about the specific storage device being queried.
-
-   See Also
-   * CyAsStorageQueryDevice
-*/
-typedef struct cy_as_device_desc {
-	/* Type of device */
-	cy_as_media_type   type;
-	/* Is the device removable */
-	cy_bool		removable;
-	/* Is the device writeable */
-	cy_bool		writeable;
-	/* Basic block size for device */
-	uint16_t		block_size;
-	/* Number of LUNs on the device */
-	uint32_t		number_units;
-	/* Is the device password locked */
-	cy_bool		locked;
-	 /* Size in bytes of an Erase Unit. Block erase operation
-	is only supported for SD storage, and the erase_unit_size
-	is invalid for all other kinds of storage. */
-	uint32_t		erase_unit_size;
-} cy_as_device_desc;
-
-/* Summary
-   This data structure describes a specific unit on a
-   specific type of media
-
-   Description
-   This data structure is the return value from the
-   CyAsStorageQueryUnit function. This structure provides
-   information about the specific unit.
-
-   See Also
-   * CyAsStorageQueryUnit
-*/
-typedef struct cy_as_unit_desc {
-	/* Type of device */
-	cy_as_media_type type;
-	/* Basic block size for device */
-	uint16_t block_size;
-	/* Physical start block for LUN */
-	uint32_t start_block;
-	/* Number of blocks in the LUN */
-	uint32_t unit_size;
-} cy_as_unit_desc;
-
-/* Summary
-   This function type defines a callback to be called after an
-   asynchronous operation
-
-   Description
-   This function type defines a callback function that is called
-   at the completion of any asynchronous read or write operation.
-
-   See Also
-   * CyAsStorageReadAsync()
-   * CyAsStorageWriteAsync()
-*/
-typedef void (*cy_as_storage_callback)(
-	/* Handle to the device completing the storage operation */
-	cy_as_device_handle handle,
-	/* The bus completing the operation */
-	cy_as_bus_number_t bus,
-	/* The device completing the operation */
-	uint32_t device,
-	/* The unit completing the operation */
-	uint32_t unit,
-	/* The block number of the completed operation */
-	uint32_t block_number,
-	/* The type of operation */
-	cy_as_oper_type op,
-	/* The error status */
-	cy_as_return_status_t status
-	);
-
-/* Summary
-   This function type defines a callback to be called in the
-   event of a storage related event
-
-   Description
-   At times West Bridge needs to inform the P port processor
-   of events that have
-   occurred.  These events are asynchronous to the thread of
-   control on the P
-   port processor and as such are generally delivered via a
-   callback function that
-   is called as part of an interrupt handler.  This type
-   defines the type of function
-   that must be provided as a callback function.
-
-   See Also
-   * CyAsStorageEvent
-   * CyAsStorageRegisterCallback
-*/
-typedef void (*cy_as_storage_event_callback)(
-	/* Handle to the device sending the event notification */
-	cy_as_device_handle handle,
-	/* The bus where the event happened */
-	cy_as_bus_number_t  bus,
-	/* The device where the event happened */
-	uint32_t device,
-	/* The event type */
-	cy_as_storage_event evtype,
-	/* Event related data */
-	void *evdata
-	);
-
-/* Summary
-   This function type defines a callback to be called after
-   an asynchronous sdio operation
-
-   Description
-   The Callback function is called at the completion of an
-   asynchronous sdio read or write operation.
-
-   See Also
-   * CyAsSdioExtendedRead()
-   * CyAsSdioExtendedWrite()
-*/
-typedef void (*cy_as_sdio_callback)(
-	/* Handle to the device completing the storage operation */
-	cy_as_device_handle handle,
-	/* The bus completing the operation */
-	cy_as_bus_number_t bus,
-	/* The device completing the operation */
-	uint32_t device,
-	/* The function number of the completing the operation.
-	if the status of the operation is either CY_AS_ERROR_IO_ABORTED
-	or CY_AS_IO_SUSPENDED then the most significant word parameter will
-	contain the number of blocks still pending. */
-	uint32_t function,
-	/* The base address of the completed operation */
-	uint32_t address,
-	/* The type of operation */
-	cy_as_oper_type op,
-	/* The status of the operation */
-	cy_as_return_status_t status
-	);
-
-/* Summary
-   Enumeration of SD/MMC card registers that can be read
-   through the API.
-
-   Description
-   Some of the registers on the SD/MMC card(s) attached to the
-   West Bridge can be read through the API layers. This type
-   enumerates the registers that can be read.
-
-   See Also
-   * CyAsStorageSDRegisterRead
- */
-typedef enum cy_as_sd_card_reg_type {
-	cy_as_sd_reg_OCR = 0,
-	cy_as_sd_reg_CID,
-	cy_as_sd_reg_CSD
-} cy_as_sd_card_reg_type;
-
-/* Summary
-   Struct encapsulating parameters and return values for a
-   CyAsStorageQueryDevice call.
-
-   Description
-   This struct holds the input parameters and the return values
-   for an asynchronous CyAsStorageQueryDevice call.
-
-   See Also
-   * CyAsStorageQueryDevice
- */
-typedef struct cy_as_storage_query_device_data {
-	/* The bus with the device to query */
-	cy_as_bus_number_t	bus;
-	/* The logical device number to query */
-	uint32_t		device;
-	/* The return value for the device descriptor */
-	cy_as_device_desc	 desc_p;
-} cy_as_storage_query_device_data;
-
-
-/* Summary
-   Struct encapsulating parameters and return values
-   for a CyAsStorageQueryUnit call.
-
-   Description
-   This struct holds the input parameters and the return
-   values for an asynchronous CyAsStorageQueryUnit call.
-
-   See Also
-   * CyAsStorageQueryUnit
- */
-typedef struct cy_as_storage_query_unit_data {
-	/* The bus with the device to query */
-	cy_as_bus_number_t	bus;
-	/* The logical device number to query */
-	uint32_t			device;
-	/* The unit to query on the device */
-	uint32_t			unit;
-	/* The return value for the unit descriptor */
-	cy_as_unit_desc	 desc_p;
-} cy_as_storage_query_unit_data;
-
-/* Summary
-   Struct encapsulating the input parameter and return
-   values for a CyAsStorageSDRegisterRead call.
-
-   Description
-   This struct holds the input parameter and return
-   values for an asynchronous CyAsStorageSDRegisterRead
-   call.
-
-   See Also
-   * CyAsStorageSDRegisterRead
- */
-typedef struct cy_as_storage_sd_reg_read_data {
-	/* Pointer to the result buffer. */
-	uint8_t *buf_p;
-	/* Length of data to be copied in bytes. */
-	uint8_t  length;
-} cy_as_storage_sd_reg_read_data;
-
-/* Summary
-   Controls which pins are used for card detection
-
-   Description
-   When a StorageDeviceControl call is made to enable or
-   disable card detection this enum is passed in to
-   control which pin is used for the detection.
-
-   See Also
-   * CyAsStorageDeviceControl
-*/
-typedef enum cy_as_storage_card_detect {
-	cy_as_storage_detect_GPIO,
-	cy_as_storage_detect_SDAT_3
-} cy_as_storage_card_detect;
-
-#ifndef __doxygen__
-#define cy_as_storage_detect_GPIO_0 cy_as_storage_detect_GPIO
-
-/* Length of OCR value in bytes. */
-#define CY_AS_SD_REG_OCR_LENGTH		 (4)
-/* Length of CID value in bytes. */
-#define CY_AS_SD_REG_CID_LENGTH		 (16)
-/* Length of CSD value in bytes. */
-#define CY_AS_SD_REG_CSD_LENGTH		 (16)
-/* Max. length of register response in words. */
-#define CY_AS_SD_REG_MAX_RESP_LENGTH	(10)
-
-#endif
-
-/* Summary
-   This data structure is the data passed via the evdata
-   paramater on a usb event callback for the mass storage
-   device progress event.
-
-   Description
-   This data structure reports the number of sectors that have
-   been written and read on the USB mass storage device since
-   the last event report.  The corresponding event is only sent
-   when either the number of writes, or the number of reads has
-   crossed a pre-set threshold.
-
-   See Also
-   * CyAsUsbEventCallback
-   * CyAsUsbRegisterCallback
-*/
-typedef struct cy_as_m_s_c_progress_data {
-	/* Number of sectors written since the last event. */
-	uint32_t wr_count;
-	/* Number of sectors read since the last event. */
-	uint32_t rd_count;
-} cy_as_m_s_c_progress_data;
-
-/* Summary
-Flag to set Direct Write operation to read back from the
-address written to.
-
-
- See Also
- *CyAsSdioDirectWrite()
-*/
-#define CY_SDIO_RAW	(0x01)
-
-
-/* Summary
-Flag to set Extended Read and Write to perform IO
-using a FIFO i.e. read or write from the specified
-address only.
-
- See Also
- *CyAsSdioExtendedRead()
- *CyAsSdioExtendedWrite()
-*/
-#define CY_SDIO_OP_FIFO (0x00)
-
-/* Summary
-Flag to set Extended Read and Write to perform incremental
-IO using the address provided as the base address.
-
-
- See Also
- *CyAsSdioExtendedRead()
- *CyAsSdioExtendedWrite()
-*/
-#define CY_SDIO_OP_INCR		 (0x02)
-
-/* Summary
-Flag to set Extended Read and Write to Block Mode operation
-
- See Also
- *CyAsSdioExtendedRead()
- *CyAsSdioExtendedWrite()
-*/
-#define CY_SDIO_BLOCKMODE	   (0x04)
-
-/* Summary
-Flag to set Extended Read and Write to Byte Mode operation
-
- See Also
- *CyAsSdioExtendedRead()
- *CyAsSdioExtendedWrite()
-*/
-#define CY_SDIO_BYTEMODE		(0x00)
-
-/* Summary
-Flag to force re/initialization of a function.
-
-Description
-If not set a call to CyAsSdioInitFunction()
-will not initialize a function that has been previously
-initialized.
- See Also
- *CyAsSdioInitFunction()
- */
-#define CY_SDIO_FORCE_INIT	  (0x40)
-
-/* Summary
-Flag to re-enable the SDIO interrupts.
-
-Description
-Used with a direct read or direct write
-after the Interrupt triggerred by SDIO has been serviced
-and cleared to reset the West Bridge Sdio Interrupt.
- See Also
- *CyAsSdioDirectRead()
- *CyAsSdioDirectWrite()
-*/
-
-#define CY_SDIO_REARM_INT	   (0x80)
-
-
-/* Summary
-   Flag to check if 4 bit support is enabled on a
-   low speed card
-   See Also
-   <link CyAsSDIOCard::card_capability>*/
-#define CY_SDIO_4BLS	(0x80)
-
-/* Summary
-   Flag to check if card is a low speed card
-   See Also
-   <link CyAsSDIOCard::card_capability>	  */
-#define CY_SDIO_LSC	 (0x40)
-
-/* Summary
-   Flag to check if interrupt during multiblock data
-   transfer is enabled
-   See Also
-   <link CyAsSDIOCard::card_capability>*/
-#define CY_SDIO_E4MI	(0x20)
-
-/* Summary
-   Flag to check if interrupt during multiblock data
-   transfer is supported
-   See Also
-   <link CyAsSDIOCard::card_capability>	*/
-#define CY_SDIO_S4MI	(0x10)
-
-/* Summary
-   Flag to check if card supports function suspending.
-   See Also
-   <link CyAsSDIOCard::card_capability>	 */
-#define CY_SDIO_SBS	 (0x08)
-
-/* Summary
-   Flag to check if card supports SDIO Read-Wait
-   See Also
-   <link CyAsSDIOCard::card_capability>	 */
-#define CY_SDIO_SRW	 (0x04)
-
-/* Summary
-   Flag to check if card supports multi-block transfers
-   See Also
-   <link CyAsSDIOCard::card_capability>	*/
-#define CY_SDIO_SMB	 (0x02)
-
-/* Summary
-   Flag to check if card supports Direct IO commands
-   during execution of an Extended
-   IO function
-   See Also
-   <link CyAsSDIOCard::card_capability>*/
-#define CY_SDIO_SDC	 (0x01)
-
-/* Summary
-   Flag to check if function has a CSA area.
-   See Also
-   <link CyAsSDIOFunc::csa_bits> */
-#define CY_SDIO_CSA_SUP		 (0x40)
-
-/* Summary
-   Flag to check if CSA access is enabled.
-   See Also
-   <link CyAsSDIOFunc::csa_bits> */
-#define CY_SDIO_CSA_EN		  (0x80)
-
-/* Summary
-   Flag to check if CSA is Write protected.
-   See Also
-   <link CyAsSDIOFunc::csa_bits> */
-#define CY_SDIO_CSA_WP		  (0x01)
-
-/* Summary
-   Flag to check if CSA formatting is prohibited.
-   See Also
-   <link CyAsSDIOFunc::csa_bits>*/
-#define CY_SDIO_CSA_NF		  (0x02)
-
-/* Summary
-   Flag to check if the function allows wake-up from low
-   power mode using some vendor specific method.
-   See Also
-   <link CyAsSDIOFunc::wakeup_support>*/
-#define CY_SDIO_FN_WUS		  (0x01)
-
-
-/* Summary
-   This data structure stores SDIO function 0
-   parameters for a SDIO card
-*/
-typedef struct cy_as_sdio_card {
-	/* Number of functions present on the card. */
-	uint8_t	 num_functions;
-	/* Memory present(Combo card) or not */
-	uint8_t	 memory_present;
-	/* 16 bit manufacturer ID */
-	uint16_t	manufacturer__id;
-	/* Additional vendor specific info */
-	uint16_t	manufacturer_info;
-	/* Max Block size for function 0 */
-	uint16_t	maxblocksize;
-	/* Block size used for function 0 */
-	uint16_t	blocksize;
-	/* SDIO version supported by the card */
-	uint8_t	 sdio_version;
-	/* Card capability flags */
-	uint8_t	 card_capability;
-} cy_as_sdio_card;
-
-/* Summary
-   This data structure stores SDIO function 1-7 parameters
-   for a SDIO card
-*/
-typedef struct cy_as_sdio_func {
-	/* SDIO function code. 0 if non standard function */
-	uint8_t	 function_code;
-	/* Extended function type code for non-standard function */
-	uint8_t	 extended_func_code;
-	/* Max IO Blocksize supported by the function */
-	uint16_t	maxblocksize;
-	/* IO Blocksize used by the function */
-	uint16_t	blocksize;
-	/* 32 bit product serial number for the function */
-	uint32_t	card_psn;
-	/* Code storage area variables */
-	uint8_t	 csa_bits;
-	/* Function wake-up support */
-	uint8_t	 wakeup_support;
-} cy_as_sdio_func;
-
-/***********************************
- * West Bridge Functions
- ************************************/
-
-/* Summary
-   This function starts the West Bridge storage module.
-
-   Description
-   This function initializes the West Bridge storage software
-   stack and readies this module to service storage related
-   requests.  If the stack is already running, the reference
-   count for the stack is incremented.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was passed in
-   * CY_AS_ERROR_SUCCESS - the module started successfully
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-   See Also
-   * CyAsStorageStop
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_start(
-	/* Handle to the device */
-	cy_as_device_handle	handle,
-	/* Callback to be called when the operation is complete */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback */
-	uint32_t		client
-	);
-
-/* Summary
-   This function stops the West Bridge storage module.
-
-   Description
-   This function decrements the reference count for the
-   storage stack and if this count is zero, the storage
-   stack is shut down.  The shutdown frees all resources
-   associated with the storage stack.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Notes
-   While all resources associated with the storage stack
-   will be freed is a shutdown occurs,
-   resources associated with underlying layers of the
-   software will not be freed if they
-   are shared by the USB stack and the USB stack is
-   active.  Specifically the DMA manager,
-   the interrupt manager, and the West Bridge
-   communications module are all shared by both the
-   USB stack and the storage stack.
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge
-   *	device has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not
-   *	been loaded into West Bridge
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_SUCCESS - this module was shut
-   *	down successfully
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred
-   *	communicating with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING
-   * CY_AS_ERROR_ASYNC_PENDING
-   * CY_AS_ERROR_OUT_OF_MEMORY
-
-   See Also
-   * CyAsStorageStart
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_stop(
-	/* Handle to the device to configure */
-	cy_as_device_handle	handle,
-	/* Callback to be called when the operation is complete */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback */
-	uint32_t		client
-	);
-
-/* Summary
-   This function is used to register a callback function
-   for the storage API.
-
-   Description
-   At times West Bridge needs to inform the P port processor
-   of events that have occurred.  These events are asynchronous
-   to the thread of control on the P
-   port processor and as such are generally delivered via a
-   callback function that
-   is called as part of an interrupt handler.  This function
-   registers the callback
-   function that is called when an event occurs.  Each call
-   to this function
-   replaces any old callback function with a new callback
-   function supplied on
-   the most recent call.  This function can also be called
-   with a callback function
-   of NULL in order to remove any existing callback function
-
-   * Valid In Asynchronous Callback:YES
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has
-   *	not been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle
-   *	was passed in
-   * CY_AS_ERROR_SUCCESS - the function was registered
-   *	successfully
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-
-   See Also
-   * CyAsStorageEventCallback
-   * CyAsStorageEvent
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_register_callback(
-	/* Handle to the device of interest */
-	cy_as_device_handle			handle,
-	/* The callback function to call for async storage events */
-	cy_as_storage_event_callback	callback
-	);
-
-/* Summary
-   This function claims a given media type.
-
-   Description
-   This function communicates to West Bridge that the
-   processor wants control of the
-   given storage media type.  Each media type can be
-   claimed or released by the
-   processor independently.  As the processor is the
-   master for the storage,
-   West Bridge should release control of the requested
-   media as soon as possible and
-   signal the processor via the CyAsStorageProcessor event.
-
-   * Valid In Asynchronous Callback: NO
-
-   Notes
-   This function just notifies West Bridge that the storage
-   is desired.  The storage
-   has not actually been released by West Bridge until the
-   registered callback function
-   is called with the CyAsStorageProcessor event
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_SUCCESS - this request was successfully
-   *	transmitted to the West Bridge device
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_MEDIA
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-   * CY_AS_ERROR_NOT_ACQUIRED
-
-   See Also:
-   * CyAsStorageClaim
-   * CyAsStorageRelease
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_claim(
-	/* Handle to the device of interest */
-	cy_as_device_handle	handle,
-	/* The bus to claim */
-	cy_as_bus_number_t	 bus,
-	/* The device to claim */
-	uint32_t		 device,
-	/* Callback to be called when the operation is complete */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback */
-	uint32_t		client
-	);
-
-/* Summary
-   This function releases a given media type.
-
-   Description
-   This function communicates to West Bridge that the
-   processor has released control of
-   the given storage media type.  Each media type can
-   be claimed or released by the
-   processor independently.  As the processor is the
-   master for the storage, West Bridge
-   can now assume ownership of the media type.  No callback
-   or event is generated.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle
-   *	was passed in
-   * CY_AS_ERROR_SUCCESS - the media was successfully
-   *	released
-   * CY_AS_ERROR_MEDIA_NOT_CLAIMED - the media was not
-   *	claimed by the P port
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred
-   *	communicating with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_MEDIA
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-   See Also
-   * CyAsStorageClaim
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_release(
-	/* Handle to the device of interest */
-	cy_as_device_handle	handle,
-	/* The bus to release */
-	cy_as_bus_number_t	 bus,
-	/* The device to release */
-	uint32_t		 device,
-	/* Callback to be called when the operation is complete */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback */
-	uint32_t		client
-	);
-
-/* Summary
-   This function information about the number of devices present
-   on a given bus
-
-   Description
-   This function retrieves information about how many devices on
-   on the given
-   West Bridge bus.
-
-   * Valid In Asynchronous Callback: NO
-
-   Notes
-   While the current implementation of West Bridge only
-   supports one of logical device of
-   each media type, future versions WestBridge/Antioch may
-   support multiple devices.
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_SUCCESS - the media information was
-   *	returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred
-   *	communicating with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-   See Also
-   * CyAsStorageQueryDevice
-   * CyAsStorageQueryUnit
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_query_bus(
-	/* Handle to the device of interest */
-	cy_as_device_handle	handle,
-	/* The bus to query */
-	cy_as_bus_number_t		bus,
-	/* The return value containing the number of
-	devices present for this media type */
-	uint32_t *count,
-	/* Callback to be called when the operation is complete */
-	cy_as_function_callback	 cb,
-	/* Client data to be passed to the callback */
-	uint32_t client
-	);
-
-/* Summary
-   This function information about the number of devices
-   present for a given media type
-
-   Description
-   This function retrieves information about how many
-   devices of a given media type are attached to West Bridge.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Notes
-   While the current implementation of West Bridge only
-   supports one of logical device of each media type, future
-   versions West Bridge may support multiple devices.
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_SUCCESS - the media information was
-   *	returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred
-   *	communicating with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-   See Also
-   * CyAsStorageQueryMedia
-   * CyAsMediaType
-   * CyAsStorageQueryDevice
-   * CyAsStorageQueryUnit
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_query_media(
-	/* Handle to the device of interest */
-	cy_as_device_handle	handle,
-	/* The type of media to query */
-	cy_as_media_type		type,
-	/* The return value containing the number of
-	devices present for this media type */
-	uint32_t *count,
-	/* Callback to be called when the operation is complete */
-	cy_as_function_callback	 cb,
-	/* Client data to be passed to the callback */
-	uint32_t		client
-	);
-
-/* Summary
-   This function returns information about a given device
-   of a specific media type
-
-   Description
-   This function retrieves information about a device of a
-   given type of media.  The function is called with a given
-   media type and device and a pointer to a media descriptor
-   (CyAsDeviceDesc).  This function fills in the data in the
-   media descriptor to provide information about the
-   attributes of the device of the given device.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Notes
-   Currently this API only supports a single logical device
-   of each media type.  Therefore the only acceptable value
-   for the parameter device is zero (0).
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_SUCCESS - the media information was
-   *	returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_NO_SUCH_MEDIA
-   * CY_AS_ERROR_NO_SUCH_DEVICE
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-   See Also
-   * CyAsMediaType
-   * CyAsStorageQueryMedia
-   * CyAsStorageQueryUnit
-   * CyAsDeviceDesc
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_query_device(
-	/* Handle to the device of interest */
-	cy_as_device_handle		handle,
-	/* Parameters and return value for the query call */
-	cy_as_storage_query_device_data *data,
-	/* Callback to be called when the operation is complete */
-	cy_as_function_callback		cb,
-	 /* Client data to be passed to the callback */
-	uint32_t			client
-	);
-
-/* Summary
-   This function returns information about a given unit on a
-   specific device
-
-   Description
-   This function retrieves information about a device of a
-   given logical unit.  The function is called with a given
-   media type, device address, unit address,  and a pointer
-   to a unit descriptor (CyAsUnitDesc).  This function fills
-   in the data in the unit descriptor to provide information
-   about the attributes of the device of the given logical
-   unit.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_SUCCESS - the media information was returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_NO_SUCH_DEVICE
-   * CY_AS_ERROR_NO_SUCH_UNIT
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-
-   See Also
-   * CyAsMediaType
-   * CyAsStorageQueryMedia
-   * CyAsStorageQueryDevice
-   * CyAsUnitDesc
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_query_unit(
-	/* Handle to the device of interest */
-	cy_as_device_handle		handle,
-	/* Parameters and return value for the query call */
-	cy_as_storage_query_unit_data *data_p,
-	/* Callback to be called when the operation is complete */
-	cy_as_function_callback		cb,
-	/* Client data to be passed to the callback */
-	uint32_t			client
-	);
-
-/* Summary
-   This function enables/disables the handling of SD/MMC card
-   detection and SD/MMC write protection in West Bridge Firmware.
-
-   Description
-   If the detection of SD/MMC card insertion or removal is being
-   done by the Processor directly, the West Bridge firmware needs
-   to be instructed to disable the card detect feature. Also, if
-   the hardware design does not use the SD_WP GPIO of the West
-   Bridge to handle SD card's write protect notch, the handling
-   of write protection if firmware should be disabled. This API
-   is used to enable/disable the card detect and write protect
-   support in West Bridge firmware.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the feature controls were
-   *	set successfully
-   * CY_AS_ERROR_NO_SUCH_BUS - the specified bus is invalid
-   * CY_AS_ERROR_NOT_SUPPORTED - function not supported on
-   *	the device in the specified bus
-   * CY_AS_ERROR_IN_SUSPEND - the West Brdige device is in
-   *	suspended mode
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_device_control(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	handle,
-	/* The bus to control */
-	cy_as_bus_number_t	 bus,
-	/* The device to control */
-	uint32_t		 device,
-	/* Enable/disable control for card detection */
-	cy_bool		card_detect_en,
-	/* Enable/disable control for write protect handling */
-	cy_bool		write_prot_en,
-	/* Control which pin is used for card detection */
-	cy_as_storage_card_detect	config_detect,
-	 /* Callback to be called when the operation is complete */
-	cy_as_function_callback	 cb,
-	/* Client data to be passed to the callback */
-	uint32_t		client
-		);
-
-/* Summary
-   This function reads one or more blocks of data from
-   the storage system.
-
-   Description
-   This function synchronously reads one or more blocks
-   of data from the given media
-   type/device and places the data into the data buffer
-   given.  This function does not
-   return until the data is read and placed into the buffer.
-
-   * Valid In Asynchronous Callback: NO
-
-   Notes
-   If the Samsung CEATA drive is the target for a
-   read/write operation, the maximum
-   number of sectors that can be accessed through a
-   single API call is limited to 2047.
-   Longer accesses addressed to a Samsung CEATA drive
-   can result in time-out errors.
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle
-   *	was passed in
-   * CY_AS_ERROR_SUCCESS - the media information was
-   *	returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred
-   *	communicating with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified
-   *	does not exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified
-   *	media/device pair does not exist
-   * CY_AS_ERROR_NO_SUCH_UNIT - the unit specified
-   *	does not exist
-   * CY_AS_ERROR_ASYNC_PENDING - an async operation
-   *	is pending
-   * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was
-   *	error in reading from the media
-   * CY_AS_ERROR_MEDIA_WRITE_PROTECTED - the media is
-   *	write protected
-   * CY_AS_ERROR_INVALID_PARAMETER - Reads/Writes greater
-   *	than 4095 logic blocks are not allowed
-
-   See Also
-   * CyAsStorageReadAsync
-   * CyAsStorageWrite
-   * CyAsStorageWriteAsync
-   * CyAsStorageCancelAsync
-   * <LINK Asynchronous Versus Synchronous Operation>
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_read(
-	/* Handle to the device of interest */
-	cy_as_device_handle	handle,
-	/* The bus to access */
-	cy_as_bus_number_t		bus,
-	/* The device to access */
-	uint32_t		device,
-	/* The unit to access */
-	uint32_t		unit,
-	/* The first block to access */
-	uint32_t		block,
-	/* The buffer where data will be placed */
-	void *data_p,
-	/* The number of blocks to be read */
-	uint16_t		num_blocks
-	);
-
-/* Summary
-   This function asynchronously reads one or more blocks of data
-   from the storage system.
-
-   Description
-   This function asynchronously reads one or more blocks of
-   data from the given media
-   type/device and places the data into the data buffer given.
-   This function returns
-   as soon as the request is transmitted to the West Bridge
-   device but before the data is
-   available.  When the read is complete, the callback function
-   is called to indicate the
-   data has been placed into the data buffer.  Note that the
-   data buffer must remain
-   valid from when the read is requested until the callback
-   function is called.
-
-   * Valid In Asynchronous Callback: YES
-
-   Notes
-   If the Samsung CEATA drive is the target for a read/write
-   operation, the maximum
-   number of sectors that can be accessed through a single API
-   call is limited to 2047.
-   Longer accesses addressed to a Samsung CEATA drive can
-   result in time-out errors.
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle
-   *	was passed in
-   * CY_AS_ERROR_SUCCESS - the media information was
-   *	returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred
-   *	communicating with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_ASYNC_PENDING - an async operation
-   *	is pending
-   * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error
-   *	in reading from the media
-   * CY_AS_ERROR_MEDIA_WRITE_PROTECTED - the media is
-   *	write protected
-   * CY_AS_ERROR_QUERY_DEVICE_NEEDED - Before an
-   *	asynchronous read can be issue a call to
-   * CyAsStorageQueryDevice must be made
-   * CY_AS_ERROR_INVALID_PARAMETER - Reads/Writes greater
-   * than 4095 logic blocks are not allowed
-
-   See Also
-   * CyAsStorageRead
-   * CyAsStorageWrite
-   * CyAsStorageWriteAsync
-   * CyAsStorageCancelAsync
-   * CyAsStorageQueryDevice
-   * <LINK Asynchronous Versus Synchronous Operation>
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_read_async(
-	/* Handle to the device of interest */
-	cy_as_device_handle handle,
-	/* The bus to access */
-	cy_as_bus_number_t	bus,
-	/* The device to access */
-	uint32_t device,
-	/* The unit to access */
-	uint32_t unit,
-	/* The first block to access */
-	uint32_t block,
-	/* The buffer where data will be placed */
-	void *data_p,
-	/* The number of blocks to be read */
-	uint16_t num_blocks,
-	/* The function to call when the read is complete
-	or an error occurs */
-	cy_as_storage_callback		callback
-	);
-
-/* Summary
-   This function writes one or more blocks of data
-   to the storage system.
-
-   Description
-   This function synchronously writes one or more blocks of
-   data to the given media/device.
-   This function does not return until the data is written
-   into the media.
-
-   * Valid In Asynchronous Callback: NO
-
-   Notes
-   If the Samsung CEATA drive is the target for a read/write
-   operation, the maximum
-   number of sectors that can be accessed through a single
-   API call is limited to 2047.
-   Longer accesses addressed to a Samsung CEATA drive can
-   result in time-out errors.
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_SUCCESS - the media information was
-   *	returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred
-   *	communicating with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does
-   *	not exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified
-   *	media/device pair does not exist
-   * CY_AS_ERROR_NO_SUCH_UNIT - the unit specified
-   *	does not exist
-   * CY_AS_ERROR_ASYNC_PENDING - an async operation
-   *	is pending
-   * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error
-   *	in reading from the media
-   * CY_AS_ERROR_MEDIA_WRITE_PROTECTED - the media is
-   *	write protected
-   * CY_AS_ERROR_INVALID_PARAMETER - Reads/Writes greater
-   *	than 4095 logic blocks are not allowed
-
-   See Also
-   * CyAsStorageRead
-   * CyAsStorageReadAsync
-   * CyAsStorageWriteAsync
-   * CyAsStorageCancelAsync
-   * <LINK Asynchronous Versus Synchronous Operation>
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_write(
-	/* Handle to the device of interest */
-	cy_as_device_handle	handle,
-	/* The bus to access */
-	cy_as_bus_number_t bus,
-	/* The device to access */
-	uint32_t device,
-	/* The unit to access */
-	uint32_t unit,
-	/* The first block to access */
-	uint32_t block,
-	/* The buffer containing the data to be written */
-	void *data_p,
-	/* The number of blocks to be written */
-	uint16_t num_blocks
-	);
-
-/* Summary
-   This function asynchronously writes one or more blocks
-   of data to the storage system
-
-   Description
-   This function asynchronously writes one or more blocks of
-   data to the given media type/device.
-   This function returns as soon as the request is transmitted
-   to the West Bridge device
-   but before the data is actually written.  When the write is
-   complete, the callback
-   function is called to indicate the data has been physically
-   written into the media.
-
-   * Valid In Asynchronous Callback: YES
-
-   Notes
-   If the Samsung CEATA drive is the target for a read/write
-   operation, the maximum
-   number of sectors that can be accessed through a single API
-   call is limited to 2047.
-   Longer accesses addressed to a Samsung CEATA drive can
-   result in time-out errors.
-
-   Notes
-   The data buffer must remain valid from when the write is
-   requested until the callback function is called.
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has
-   *	not been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was passed in
-   * CY_AS_ERROR_SUCCESS - the media information was returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_ASYNC_PENDING - an async operation is
-   *	pending
-   * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
-   *	reading from the media
-   * CY_AS_ERROR_MEDIA_WRITE_PROTECTED - the media is write
-   *	protected
-   * CY_AS_ERROR_QUERY_DEVICE_NEEDED - A query device call is
-   *	required before async writes are allowed
-   * CY_AS_ERROR_INVALID_PARAMETER - Reads/Writes greater
-   *	than 4095 logic blocks are not allowed
-
-   See Also
-   * CyAsStorageRead
-   * CyAsStorageWrite
-   * CyAsStorageReadAsync
-   * CyAsStorageCancelAsync
-   * CyAsStorageQueryDevice
-   * <LINK Asynchronous Versus Synchronous Operation>
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_write_async(
-	/* Handle to the device of interest */
-	cy_as_device_handle	handle,
-	/* The bus to access */
-	cy_as_bus_number_t	bus,
-	/* The device to access */
-	uint32_t	device,
-	/* The unit to access */
-	uint32_t	unit,
-	/* The first block to access */
-	uint32_t	block,
-	/* The buffer where the data to be written is stored */
-	void *data_p,
-	/* The number of blocks to be written */
-	uint16_t num_blocks,
-	/* The function to call when the write is complete
-		or an error occurs */
-	cy_as_storage_callback	callback
-	);
-
-/* Summary
-   This function aborts any outstanding asynchronous operation
-
-   Description
-   This function aborts any asynchronous block read or block
-   write operation.  As only a single asynchronous block read
-   or write operation is possible at one time, this aborts
-   the single operation in progress.
-
-   * Valid In Asynchronous Callback: YES
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was passed in
-   * CY_AS_ERROR_SUCCESS - the media information was returned
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_OPERATION_PENDING - no asynchronous
-   *	operation is pending
-
-   See Also
-   * CyAsStorageRead
-   * CyAsStorageReadAsync
-   * CyAsStorageWrite
-   * CyAsStorageWriteAsync
-   * <LINK Asynchronous Versus Synchronous Operation>
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_cancel_async(
-	/* Handle to the device with outstanding async request */
-	cy_as_device_handle		handle
-	);
-
-/* Summary
-   This function is used to read the content of SD registers
-
-   Description
-   This function is used to read the contents of CSD, CID and
-   CSD registers of the SD Card.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the read operation was successful
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was passed in
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not been
-   *	started
-   * CY_AS_ERROR_IN_SUSPEND - The West Bridge device is in
-   *	suspend mode
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device pair
-   *	does not exist
-   * CY_AS_ERROR_INVALID_PARAMETER - The register type is invalid
-   *	or the media is not supported on the bus
-   * CY_AS_ERROR_OUT_OF_MEMORY - failed to get memory to process
-   *	request
-   * CY_AS_ERROR_INVALID_RESPONSE - communication failure with
-   *	West Bridge firmware
-
-   See Also
-   * CyAsStorageSDRegReadData
- */
-EXTERN cy_as_return_status_t
-cy_as_storage_sd_register_read(
-	/* Handle to the West Bridge device. */
-	cy_as_device_handle	handle,
-	/* The bus to query */
-	cy_as_bus_number_t	bus,
-	/* The device to query */
-	uint8_t	device,
-	/* The type of register to read. */
-	cy_as_sd_card_reg_type reg_type,
-	/* Output data buffer and length. */
-	cy_as_storage_sd_reg_read_data	 *data_p,
-	/* Callback function to call when done. */
-	cy_as_function_callback		cb,
-	/* Call context to send to the cb function. */
-	uint32_t client
-	);
-
-/* Summary
-   Creates a partition starting at the given block and using the
-   remaining blocks on the card.
-
-   Description
-   Storage devices attached to West Bridge can be partitioned
-   into two units.
-   The visibility of these units through the mass storage
-   interface can be
-   individually controlled.  This API is used to partition
-   a device into two.
-
-   * Valid in Asynchronous Callback: Yes (if cb supplied)
-   * Nestable: Yes
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the partition was successfully created
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was passed in
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not been
-   *	started
-   * CY_AS_ERROR_IN_SUSPEND - The West Bridge device is in
-   *	suspend mode
-   * CY_AS_ERROR_USB_RUNNING - Partition cannot be created while
-   *	USB stack is active
-   * CY_AS_ERROR_OUT_OF_MEMORY - failed to get memory to
-   *	process request
-   * CY_AS_ERROR_INVALID_REQUEST - feature not supported by
-   *	active device or firmware
-   * CY_AS_ERROR_INVALID_RESPONSE - communication failure with
-   *	West Bridge firmware
-   * CY_AS_ERROR_ALREADY_PARTITIONED - the storage device already
-   *	has been partitioned
-   * CY_AS_ERROR_INVALID_BLOCK - Size specified for the partition
-   *	exceeds the actual device capacity
-
-   See Also
-   * <LINK Partitioning>
-   * CyAsStorageRemovePPartition
- */
-EXTERN cy_as_return_status_t
-cy_as_storage_create_p_partition(
-	/* Handle to the device of interest */
-	cy_as_device_handle handle,
-	/* Bus on which the device to be partitioned is connected */
-	cy_as_bus_number_t bus,
-	/* Device number to be partitioned */
-	uint32_t device,
-	/* Size of partition number 0 in blocks */
-	uint32_t size,
-	/* Callback in case of async call */
-	cy_as_function_callback cb,
-	/* Client context to pass to the callback */
-	uint32_t client
-	);
-
-/* Summary
-   Removes the partition table on a storage device connected
-   to the West Bridge.
-
-   Description
-   Storage devices attached to West Bridge can be partitioned
-   into two units.This partition information is stored on the
-   device and is non-volatile.  This API is used to remove the
-   stored partition information and make the entire device
-   visible as a single partition (unit).
-
-   * Valid in Asynchronous Callback: Yes (if cb supplied)
-   * Nestable: Yes
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the partition was successfully
-   *	deleted
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_IN_SUSPEND - The West Bridge device is in
-   *	suspend mode
-   * CY_AS_ERROR_USB_RUNNING - Partition cannot be created
-   *	while USB stack is active
-   * CY_AS_ERROR_OUT_OF_MEMORY - failed to get memory to
-   *	process request
-   * CY_AS_ERROR_INVALID_REQUEST - operation not supported
-   *	by active device/firmware
-   * CY_AS_ERROR_NO_SUCH_UNIT - the addressed device is
-   *	not partitioned
-
-   See Also
-   * <LINK Partitioning>
-   * CyAsStorageCreatePPartition
- */
-EXTERN cy_as_return_status_t
-cy_as_storage_remove_p_partition(
-	/* Handle to the device of interest */
-	cy_as_device_handle handle,
-	/* Bus on which device of interest is connected */
-	cy_as_bus_number_t  bus,
-	/* Device number of interest */
-	uint32_t device,
-	/* Callback in case of async call */
-	cy_as_function_callback cb,
-	/* Client context to pass to the callback */
-	uint32_t client
-	);
-
-/* Summary
-   Returns the amount of data read/written to the given
-   device from the USB host.
-
-   Description
-
-   * Valid in Asynchronous Callback: Yes (if cb supplied)
-   * Nestable: Yes
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - API call completed successfully
-   * CY_AS_ERROR_INVALID_HANDLE - Invalid West Bridge device
-   *	handle
-   * CY_AS_ERROR_NOT_CONFIGURED - West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - No firmware image has been
-   * loaded on West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - Storage stack has not been
-   *	started
-   * CY_AS_ERROR_NOT_SUPPORTED - This function is not
-   *	supported by active firmware version
-   * CY_AS_ERROR_OUT_OF_MEMORY - Failed to get memory to
-   *	process the request
-   * CY_AS_ERROR_TIMEOUT - West Bridge firmware did not
-   *	respond to request
-   * CY_AS_ERROR_INVALID_RESPONSE - Unexpected reply from
-   *	West Bridge firmware
-
-   See Also
-   * CyAsUsbSetMSReportThreshold
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_get_transfer_amount(
-	/* Handle to the device of interest */
-	cy_as_device_handle handle,
-	/* Bus on which device of interest is connected */
-	cy_as_bus_number_t  bus,
-	/* Device number of interest */
-	uint32_t device,
-	/* Return value containing read/write sector counts. */
-	cy_as_m_s_c_progress_data *data_p,
-	/* Callback in case of async call */
-	cy_as_function_callback cb,
-	/* Client context to pass to the callback */
-	uint32_t client
-	);
-
-/* Summary
-   Performs a Sector Erase on an attached SD Card
-
-   Description
-   This allows you to erase an attached SD card. The area to erase
-   is specified in terms of a starting Erase Unit and a number of
-   Erase Units. The size of each Erase Unit is defined in the
-   DeviceDesc returned from a StorageQueryDevice call and it can
-   differ between SD cards.
-
-   A large erase can take a while to complete depending on the SD
-   card. In such a case it is recommended that an async call is made.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - API call completed successfully
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not been
-   *	started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was passed in
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_ASYNC_PENDING - an async operation is pending
-   * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
-   * reading from the media
-   * CY_AS_ERROR_MEDIA_WRITE_PROTECTED - the media is write protected
-   * CY_AS_ERROR_QUERY_DEVICE_NEEDED - A query device call is
-   *	required before erase is allowed
-   * CY_AS_ERROR_NO_SUCH_BUS
-   * CY_AS_ERROR_NO_SUCH_DEVICE
-   * CY_AS_ERROR_NOT_SUPPORTED - Erase is currently only supported
-   *	on SD and using SD only firmware
-   * CY_AS_ERROR_OUT_OF_MEMORY
-
-   See Also
-   * CyAsStorageSDRegisterRead
-*/
-EXTERN cy_as_return_status_t
-cy_as_storage_erase(
-	/* Handle to the device of interest */
-	cy_as_device_handle	 handle,
-	/* Bus on which device of interest is connected */
-	cy_as_bus_number_t	bus,
-	/* Device number of interest */
-	uint32_t device,
-	/* Erase Unit to start the erase */
-	uint32_t erase_unit,
-	/* Number of Erase Units to erase */
-	uint16_t num_erase_units,
-	/* Callback in case of async call */
-	cy_as_function_callback cb,
-	/* Client context to pass to the callback */
-	uint32_t client
-	);
-
-/* Summary
-   This function is used to read a Tuple from the SDIO CIS area.
-
-   Description
-   This function is used to read a Tuple from the SDIO CIS area.
-   This function is to be used only for IO to an SDIO card as
-   other media will not respond to the SDIO command set.
-
-   * Valid in Asynchronous Callback: NO
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_SUCCESS - the media information was returned
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device
-   *	is in suspend mode
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not
-   *	exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
-   *	pair does not exist
-   * CY_AS_ERROR_ASYNC_PENDING - an async operation is pending
-   * CY_AS_ERROR_INVALID_REQUEST - an invalid IO request
-   *	type was made
-   * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	received from the firmware
-   * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
-   *	reading from the media
-   * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made to
-   *	an invalid function
-   * CY_AS_ERROR_INVALID_ENDPOINT - A DMA request was made to
-   * an invalid endpoint
-   * CY_AS_ERROR_ENDPOINT_DISABLED - A DMA request was made to
-   *	a disabled endpoint
-
-*/
-cy_as_return_status_t
-cy_as_sdio_get_c_i_s_info(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t		bus,
-	/* Device number */
-	uint32_t		device,
-	 /* IO function Number */
-	uint8_t			n_function_no,
-	/* Id of tuple to be fetched */
-	uint16_t		tuple_id,
-	/* Buffer to hold tuple read from card.
-	 should be at least 256 bytes in size */
-	uint8_t *data_p
-	);
-
-
-/* Summary
-   This function is used to read properties of the SDIO card.
-
-   Description
-   This function is used to read properties of the SDIO card
-   into a CyAsSDIOCard structure.
-   This function is to be used only for IO to an SDIO card as
-   other media will not respond to the SDIO command set.
-
-   * Valid in Asynchronous Callback: NO
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   * loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not been
-   *	started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_SUCCESS - the card information was returned
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device is in
-   * suspend mode
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not
-   *	exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
-   *	pair does not exist
-   * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	received from the firmware
-
-*/
-cy_as_return_status_t
-cy_as_sdio_query_card(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t	 bus,
-	/* Device number */
-	uint32_t		device,
-	/* Buffer to store card properties */
-	cy_as_sdio_card		*data_p
-		);
-
-/* Summary
-   This function is used to reset a SDIO card.
-
-   Description
-   This function is used to reset a SDIO card by writing to
-   the reset bit in the CCCR and reinitializing the card. This
-   function is to be used only for IO to an SDIO card as
-   other media will not respond to the SDIO command set.
-
-   * Valid in Asynchronous Callback: NO
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device is in
-   *	suspend mode
-   * CY_AS_ERROR_SUCCESS - the media information was returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not
-   *	exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
-   *	pair does not exist
-   * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	received from the firmware
-   */
-cy_as_return_status_t
-cy_as_sdio_reset_card(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t	bus,
-	/* Device number */
-	uint32_t device
-	);
-
-/* Summary
-   This function performs a Synchronous 1 byte read from the sdio
-   device function.
-
-   Description
-   This function is used to perform a synchronous 1 byte read
-   from an SDIO card function. This function is to be used only
-   for IO to an SDIO card as other media will not respond to the
-   SDIO command set.
-
-   * Valid in Asynchronous Callback: NO
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was passed
-   *	in
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device is in
-   *	suspend mode
-   * CY_AS_ERROR_SUCCESS - the media information was returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device pair
-   *	does not exist
-   * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was received
-   *	from the firmware
-   * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in reading
-   *	from the media
-   * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made to an
-   *	invalid function
-   * CY_AS_ERROR_FUNCTION_SUSPENDED - The function to which read
-   *	was attempted is in suspend
-*/
-cy_as_return_status_t
-cy_as_sdio_direct_read(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t		 bus,
-	/* Device number */
-	uint32_t		device,
-	/* IO function Number */
-	uint8_t			n_function_no,
-	/* Address for IO */
-	uint32_t		address,
-	/* Set to CY_SDIO_REARM_INT to reinitialize SDIO interrupt */
-	uint8_t			misc_buf,
-	/* Buffer to hold byte read from card */
-	uint8_t *data_p
-		);
-
-/* Summary
-   This function performs a Synchronous 1 byte write to the
-   sdio device function.
-
-   Description
-   This function is used to perform a synchronous 1 byte write
-   to an SDIO card function.
-   This function is to be used only for IO to an SDIO card as
-   other media will not respond to the SDIO command set.
-
-   * Valid in Asynchronous Callback: NO
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   * not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   * loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not been
-   * started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   * passed in
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device is in
-   * suspend mode
-   * CY_AS_ERROR_SUCCESS - the media information was returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   * with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
-   * pair does not exist
-   * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was received
-   * from the firmware
-   * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
-   * reading from the media
-   * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made to
-   * an invalid function
-   * CY_AS_ERROR_FUNCTION_SUSPENDED - The function to which
-   * write was attempted is in suspend
-*/
-cy_as_return_status_t
-cy_as_sdio_direct_write(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t	bus,
-	/* Device number */
-	uint32_t		device,
-	/* IO function Number */
-	uint8_t			n_function_no,
-	/* Address for IO */
-	uint32_t		address,
-	/* Set to CY_SDIO_REARM_INT to reinitialize SDIO interrupt,
-	set to CY_SDIO_RAW for read after write */
-	uint8_t			misc_buf,
-	/* Byte to write */
-	uint16_t		argument,
-	/* Buffer to hold byte read from card in Read after write mode */
-	uint8_t *data_p
-	);
-
-/* Summary
-   This function is used to set the blocksize of an SDIO function.
-
-   Description
-   This function is used to set the blocksize of an SDIO function.
-   This function is to be used only for IO to an SDIO card as
-   other media will not respond to the SDIO command set.
-
-   * Valid in Asynchronous Callback: NO
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device is in
-   *	suspend mode
-   * CY_AS_ERROR_SUCCESS - the media information was
-   *	returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not
-   *	exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
-   *	pair does not exist
-   * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory
-   *	available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	received from the firmware
-   * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
-   *	reading from the media
-   * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made
-   * to an invalid function
-   * CY_AS_ERROR_INVALID_BLOCKSIZE - An incorrect blocksize
-   * was passed to the function.
-   * CY_AS_ERROR_FUNCTION_SUSPENDED - The function to which
-   * write was attempted is in suspend
-*/
-cy_as_return_status_t
-cy_as_sdio_set_blocksize(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t	bus,
-	/* Device number */
-	uint32_t device,
-	/* IO function Number */
-	uint8_t	n_function_no,
-	/* Block size to set. */
-	uint16_t blocksize
-	);
-
-/* Summary
-   This function is used to read Multibyte/Block data from a
-   IO function.
-
-   Description
-   This function is used to read Multibyte/Block data from a
-   IO function. This function is to be used only for IO to an
-   SDIO card as other media will not respond to the SDIO
-   command set.
-
-   * Valid in Asynchronous Callback: YES
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device is in
-   *	suspend mode
-   * CY_AS_ERROR_SUCCESS - the media information was returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
-   *	pair does not exist
-   * CY_AS_ERROR_ASYNC_PENDING - an async operation is pending
-   * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was received
-   *	from the firmware
-   * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
-   *	reading from the media
-   * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made to
-   *	an invalid function
-   * CY_AS_ERROR_INVALID_BLOCKSIZE - An incorrect blocksize or
-   *	block count was passed to the function.
-   * CY_AS_ERROR_FUNCTION_SUSPENDED - The function to which
-   *	write was attempted is in suspend
-   * CY_AS_ERROR_IO_ABORTED - The IO operation was aborted
-   * CY_AS_ERROR_IO_SUSPENDED - The IO operation was suspended
-   * CY_AS_ERROR_INVALID_REQUEST - An invalid request was
-   *	passed to the card.
-
-*/
-cy_as_return_status_t
-cy_as_sdio_extended_read(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t bus,
-	/* Device number */
-	uint32_t device,
-	/* IO function Number */
-	uint8_t	n_function_no,
-	/* Base Address for IO */
-	uint32_t address,
-	/* Set to CY_SDIO_BLOCKMODE for block IO,
-	CY_SDIO_BYTEMODE for multibyte IO,
-	CY_SDIO_OP_FIFO to read multiple bytes from the
-	same address, CY_SDIO_OP_INCR to read bytes from
-	the incrementing addresses */
-	uint8_t			misc_buf,
-	/* Block/Byte count to read */
-	uint16_t		argument,
-	/* Buffer to hold data read from card */
-	uint8_t *data_p,
-	/* Callback in case of Asyncronous call. 0 if Synchronous */
-	cy_as_sdio_callback		callback
-	);
-
-/* Summary
-   This function is used to write Multibyte/Block data
-   to a IO function.
-
-   Description
-   This function is used to write Multibyte/Block data
-   to a IO function. This function is to be used only
-   for IO to an SDIO card as other media will not respond
-   to the SDIO command set.
-
-   * Valid in Asynchronous Callback: YES
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device is in
-   *	suspend mode
-   * CY_AS_ERROR_SUCCESS - the media information was returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not
-   *	exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
-   *	pair does not exist
-   * CY_AS_ERROR_ASYNC_PENDING - an async operation is pending
-   * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	received from the firmware
-   * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
-   *	reading from the media
-   * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made
-   *	to an invalid function
-   * CY_AS_ERROR_INVALID_BLOCKSIZE - An incorrect blocksize or
-   *	block count was passed to the function.
-   * CY_AS_ERROR_FUNCTION_SUSPENDED - The function to which
-   *	write was attempted is in suspend
-   * CY_AS_ERROR_IO_ABORTED - The IO operation was aborted
-   * CY_AS_ERROR_IO_SUSPENDED - The IO operation was suspended
-   * CY_AS_ERROR_INVALID_REQUEST - An invalid request was
-   *	passed to the card.
-*/
-cy_as_return_status_t
-cy_as_sdio_extended_write(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t bus,
-	/* Device number */
-	uint32_t device,
-	/* IO function Number */
-	uint8_t	n_function_no,
-	/* Base Address for IO */
-	uint32_t address,
-	/* Set to CY_SDIO_BLOCKMODE for block IO,
-	CY_SDIO_BYTEMODE for multibyte IO,
-	CY_SDIO_OP_FIFO to write multiple bytes to the same address,
-	CY_SDIO_OP_INCR to write multiple bytes to incrementing
-	addresses */
-	uint8_t	 misc_buf,
-	/* Block/Byte count to write
-	in case of byte mode the count should not exceed the block size
-	or 512, whichever is smaller.
-	in case of block mode, maximum number of blocks is 511. */
-	uint16_t		argument,
-	/* Buffer to hold data to be written to card. */
-	uint8_t *data_p,
-	/* Callback in case of Asyncronous call. 0 if Synchronous */
-	cy_as_sdio_callback		callback
-	);
-
-/* Summary
-   This function is used to initialize a SDIO card function.
-
-   Description
-   This function is used to initialize a SDIO card function
-   (1 - 7). This function is to be used only for IO to an
-   SDIO card as other media will not respond to the SDIO
-   command set.
-
-   * Valid in Asynchronous Callback: NO
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not been
-   *	started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was passed
-   *	in
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device is in
-   *	suspend mode
-   * CY_AS_ERROR_SUCCESS - the media information was returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
-   * pair does not exist
-   * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	received from the firmware
-   * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
-   *	reading from the media
-   * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made
-   *	to an invalid function
-*/
-cy_as_return_status_t
-cy_as_sdio_init_function(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t	bus,
-	/* Device number */
-	uint32_t device,
-	/* IO function Number */
-	uint8_t	n_function_no,
-	/* Set to CY_SDIO_FORCE_INIT to reinitialize function */
-	uint8_t	misc_buf
-	);
-
-/* Summary
-   This function is used to get properties of a SDIO card function.
-
-   Description
-   This function is used to get properties of a SDIO card functio
-   (1 - 7) into a CyAsSDIOFunc structure. This function is to be
-   used only for IO to an SDIO card as other media will not respond
-   to the SDIO command set.
-
-   * Valid in Asynchronous Callback: NO
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not been
-   *	started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was passed
-   *	in
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device is in
-   *	suspend mode
-   * CY_AS_ERROR_SUCCESS - the media information was returned
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the media specified does
-   *	not exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device pair
-   *	does not exist
-   * CY_AS_ERROR_INVALID_FUNCTION - An IO request was made to
-   *	an invalid function
-*/
-cy_as_return_status_t
-cy_as_sdio_query_function(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t	bus,
-	/* Device number */
-	uint32_t device,
-	/* IO function Number */
-	uint8_t	n_function_no,
-	/* Buffer to store function properties */
-	cy_as_sdio_func *data_p
-	);
-
-/* Summary
-   This function is used to Abort the current IO function.
-
-   Description
-   This function is used to Abort the current IO function.
-   This function is to be used only for IO to an SDIO card as
-   other media will not respond to the SDIO command set.
-
-   * Valid in Asynchronous Callback: NO
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device is in
-   *	suspend mode
-   * CY_AS_ERROR_SUCCESS - the media information was
-   *	returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not
-   *	exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified
-   *	media/device pair does not exist
-   * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory
-   *	available
-   * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made
-   *	to an invalid function
-*/
-cy_as_return_status_t
-cy_as_sdio_abort_function(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t  bus,
-	/* Device number */
-	uint32_t device,
-	/* IO function Number */
-	uint8_t	n_function_no
-		);
-
-/* Summary
-   This function is used to Disable IO to an SDIO function.
-
-   Description
-   This function is used to Disable IO to an SDIO function.
-   This function is to be used only for IO to an SDIO card as
-   other media will not respond to the SDIO command set.
-
-   * Valid in Asynchronous Callback: NO
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device is
-   *	in suspend mode
-   * CY_AS_ERROR_SUCCESS - the media information was
-   *	returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not
-   *	exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
-   *	pair does not exist
-   * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made
-   *	to an invalid function
-*/
-cy_as_return_status_t
-cy_as_sdio_de_init_function(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t	bus,
-	/* Device number */
-	uint32_t device,
-	/* IO function Number */
-	uint8_t	n_function_no
-	);
-
-/* Summary
-   This function is used to Suspend the current IO function.
-
-   Description
-   This function is used to Suspend the current IO function.
-   This function is to be used only for IO to an SDIO card as
-   other media will not respond to the SDIO command set.
-
-   * Valid in Asynchronous Callback: NO
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has
-   *	not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device is in
-   *	suspend mode
-   * CY_AS_ERROR_SUCCESS - the media information was returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not
-   *	exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified
-   *	media/device pair does not exist
-   * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory
-   *	available
-   * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made
-   *	to an invalid function
-*/
-cy_as_return_status_t
-cy_as_sdio_suspend(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t  bus,
-	/* Device number */
-	uint32_t device,
-	/* IO function Number */
-	uint8_t	n_function_no
-	);
-
-/* Summary
-   This function is used to resume a Suspended IO function.
-
-   Description
-   This function is used to resume a Suspended IO function.
-   This function is to be used only for IO to an SDIO card as
-   other media will not respond to the SDIO command set.
-
-   * Valid in Asynchronous Callback: NO
-   * Valid on Antioch device: NO
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
-   *	has not been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
-   *	loaded into West Bridge
-   * CY_AS_ERROR_NOT_RUNNING - the storage stack has not
-   *	been started
-   * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
-   *	passed in
-   * CY_AS_ERROR_IN_SUSPEND - the West Bridge device is
-   *	in suspend mode
-   * CY_AS_ERROR_SUCCESS - the media information was
-   *	returned
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred
-   *	communicating with the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the stack is not running
-   * CY_AS_ERROR_NO_SUCH_BUS - the bus specified
-   *	does not exist
-   * CY_AS_ERROR_NO_SUCH_DEVICE - the specified
-   *	media/device pair does not exist
-   * CY_AS_ERROR_ASYNC_PENDING - an async operation
-   *	is pending
-   * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory
-   *	available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *	received from the firmware
-   * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error
-   *	in reading from the media
-   * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was
-   *	made to an invalid function
-   * CY_AS_ERROR_IO_ABORTED - The IO operation was
-   *	aborted
-   * CY_AS_ERROR_IO_SUSPENDED - The IO operation was
-   *	suspended
-   * CY_AS_ERROR_INVALID_REQUEST - An invalid request was
-   *	passed to the card.
-
-*/
-cy_as_return_status_t
-cy_as_sdio_resume(
-	/* Handle to the Westbridge device */
-	cy_as_device_handle	handle,
-	/* Bus to use */
-	cy_as_bus_number_t	bus,
-	/* Device number */
-	uint32_t device,
-	/* IO function Number */
-	uint8_t	n_function_no,
-	/* Operation to resume (Read or Write) */
-	cy_as_oper_type	op,
-	/* Micellaneous buffer same as for Extended read and Write */
-	uint8_t	misc_buf,
-	/* Number of pending blocks for IO. Should be less
-	than or equal to the maximum defined for extended
-	read and write */
-	uint16_t pendingblockcount,
-	 /* Buffer to continue the Suspended IO operation */
-	uint8_t		 *data_p
-	);
-
-
-
-/* For supporting deprecated functions */
-#include "cyasstorage_dep.h"
-
-#include "cyas_cplus_end.h"
-
-#endif				/* _INCLUDED_CYASSTORAGE_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage_dep.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage_dep.h
deleted file mode 100644
index 566b244bd8c5..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage_dep.h
+++ /dev/null
@@ -1,309 +0,0 @@
-/* Cypress West Bridge API header file (cyanstorage_dep.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-/* This header will contain Antioch specific declaration
- * of the APIs that are deprecated in Astoria SDK. This is
- * for maintaining backward compatibility
- */
-#ifndef __INCLUDED_CYANSTORAGE_DEP_H__
-#define __INCLUDED_CYANSTORAGE_DEP_H__
-
-#ifndef __doxygen__
-
-typedef void (*cy_as_storage_callback_dep)(
-/* Handle to the device completing the storage operation */
-	cy_as_device_handle handle,
-	/* The media type completing the operation */
-	cy_as_media_type type,
-	/* The device completing the operation */
-	uint32_t device,
-	/* The unit completing the operation */
-	uint32_t unit,
-	/* The block number of the completed operation */
-	uint32_t block_number,
-	/* The type of operation */
-	cy_as_oper_type op,
-	/* The error status */
-	cy_as_return_status_t status
-	);
-
-typedef void (*cy_as_storage_event_callback_dep)(
-	/* Handle to the device sending the event notification */
-	cy_as_device_handle handle,
-	/* The media type */
-	cy_as_media_type type,
-	/* The event type */
-	cy_as_storage_event evtype,
-	/* Event related data */
-	void *evdata
-	);
-
-typedef struct cy_as_storage_query_device_data_dep {
-	/* The type of media to query */
-	cy_as_media_type	type;
-	/* The logical device number to query */
-	uint32_t		device;
-	/* The return value for the device descriptor */
-	cy_as_device_desc	 desc_p;
-} cy_as_storage_query_device_data_dep;
-
-typedef struct cy_as_storage_query_unit_data_dep {
-	/* The type of media to query */
-	cy_as_media_type	type;
-	/* The logical device number to query */
-	uint32_t	device;
-	/* The unit to query on the device */
-	uint32_t	unit;
-	/* The return value for the unit descriptor */
-	cy_as_unit_desc	 desc_p;
-} cy_as_storage_query_unit_data_dep;
-
-
-/************ FUNCTIONS *********************/
-
-EXTERN cy_as_return_status_t
-cy_as_storage_register_callback_dep(
-	/* Handle to the device of interest */
-	cy_as_device_handle	handle,
-	/* The callback function to call for async storage events */
-	cy_as_storage_event_callback_dep callback
-	);
-
-EXTERN cy_as_return_status_t
-cy_as_storage_claim_dep(cy_as_device_handle handle,
-		   cy_as_media_type type
-		   );
-
-EXTERN cy_as_return_status_t
-cy_as_storage_claim_dep_EX(
-	/* Handle to the device of interest */
-	cy_as_device_handle		handle,
-	/* The type of media to claim */
-	cy_as_media_type	*type,
-	/* Callback to be called when the operation is complete */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback */
-	uint32_t	client
-	);
-
-EXTERN cy_as_return_status_t
-cy_as_storage_release_dep(cy_as_device_handle handle,
-			 cy_as_media_type type
-			 );
-
-EXTERN cy_as_return_status_t
-cy_as_storage_release_dep_EX(
-	/* Handle to the device of interest */
-	cy_as_device_handle		handle,
-	/* Handle to the device of interest */
-	cy_as_media_type	*type,
-	/* Callback to be called when the operation is complete */
-	cy_as_function_callback		cb,
-	/* Client data to be passed to the callback */
-	uint32_t			client
-	);
-
-EXTERN cy_as_return_status_t
-cy_as_storage_query_device_dep(
-			cy_as_device_handle handle,
-			 cy_as_media_type media,
-			 uint32_t device,
-			 cy_as_device_desc *desc_p
-			 );
-
-EXTERN cy_as_return_status_t
-cy_as_storage_query_device_dep_EX(
-	/* Handle to the device of interest */
-	cy_as_device_handle		handle,
-	/* Parameters and return value for the query call */
-	cy_as_storage_query_device_data_dep *data,
-	/* Callback to be called when the operation is complete */
-	cy_as_function_callback		cb,
-	/* Client data to be passed to the callback */
-	uint32_t client
-	);
-
-EXTERN cy_as_return_status_t
-cy_as_storage_query_unit_dep(
-	/* Handle to the device of interest */
-	cy_as_device_handle	handle,
-	/* The type of media to query */
-	cy_as_media_type		type,
-	/* The logical device number to query */
-	uint32_t			device,
-	/* The unit to query on the device */
-	uint32_t			unit,
-	/* The return value for the unit descriptor */
-	cy_as_unit_desc *unit_p
-	);
-
-EXTERN cy_as_return_status_t
-cy_as_storage_query_unit_dep_EX(
-	/* Handle to the device of interest */
-	cy_as_device_handle	handle,
-	/* Parameters and return value for the query call */
-	cy_as_storage_query_unit_data_dep *data_p,
-	/* Callback to be called when the operation is complete */
-	cy_as_function_callback	cb,
-	/* Client data to be passed to the callback */
-	uint32_t client
-	);
-
-EXTERN cy_as_return_status_t
-cy_as_storage_device_control_dep(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	   handle,
-	/* Enable/disable control for card detection */
-	cy_bool				 card_detect_en,
-	/* Enable/disable control for write protect handling */
-	cy_bool				 write_prot_en,
-	/* Callback to be called when the operation is complete */
-	cy_as_function_callback   cb,
-	/* Client data to be passed to the callback */
-	uint32_t			   client
-	);
-
-
-EXTERN cy_as_return_status_t
-cy_as_storage_read_dep(
-	/* Handle to the device of interest */
-	cy_as_device_handle	handle,
-	/* The type of media to access */
-	cy_as_media_type type,
-	/* The device to access */
-	uint32_t device,
-	/* The unit to access */
-	uint32_t unit,
-	/* The first block to access */
-	uint32_t block,
-	/* The buffer where data will be placed */
-	void *data_p,
-	/* The number of blocks to be read */
-	uint16_t			num_blocks
-	);
-
-EXTERN cy_as_return_status_t
-cy_as_storage_read_async_dep(
-	/* Handle to the device of interest */
-	cy_as_device_handle		handle,
-	/* The type of media to access */
-	cy_as_media_type	type,
-	/* The device to access */
-	uint32_t	device,
-	/* The unit to access */
-	uint32_t	unit,
-	/* The first block to access */
-	uint32_t		block,
-	/* The buffer where data will be placed */
-	void *data_p,
-	/* The number of blocks to be read */
-	uint16_t num_blocks,
-	/* The function to call when the read is complete
-		or an error occurs */
-	cy_as_storage_callback_dep		callback
-	);
-EXTERN cy_as_return_status_t
-cy_as_storage_write_dep(
-	/* Handle to the device of interest */
-	cy_as_device_handle	handle,
-	/* The type of media to access */
-	cy_as_media_type type,
-	/* The device to access */
-	uint32_t	device,
-	/* The unit to access */
-	uint32_t	unit,
-	/* The first block to access */
-	uint32_t	block,
-	/* The buffer containing the data to be written */
-	void	*data_p,
-	/* The number of blocks to be written */
-	uint16_t num_blocks
-	);
-
-EXTERN cy_as_return_status_t
-cy_as_storage_write_async_dep(
-	/* Handle to the device of interest */
-	cy_as_device_handle	handle,
-	/* The type of media to access */
-	cy_as_media_type	type,
-	/* The device to access */
-	uint32_t	device,
-	/* The unit to access */
-	uint32_t	unit,
-	/* The first block to access */
-	uint32_t	block,
-	/* The buffer where the data to be written is stored */
-	void *data_p,
-	/* The number of blocks to be written */
-	uint16_t num_blocks,
-	/* The function to call when the write is complete
-	or an error occurs */
-	cy_as_storage_callback_dep			callback
-	);
-
-EXTERN cy_as_return_status_t
-cy_as_storage_sd_register_read_dep(
-		cy_as_device_handle		handle,
-		cy_as_media_type		   type,
-		uint8_t				 device,
-		cy_as_sd_card_reg_type	   reg_type,
-		uint8_t				 read_len,
-		uint8_t				 *data_p
-		);
-
-EXTERN cy_as_return_status_t
-cy_as_storage_sd_register_read_dep_EX(
-	/* Handle to the West Bridge device. */
-	cy_as_device_handle	handle,
-	/* The type of media to query */
-	cy_as_media_type type,
-	/* The device to query */
-	uint8_t	device,
-	/* The type of register to read. */
-	cy_as_sd_card_reg_type	reg_type,
-	/* Output data buffer and length. */
-	cy_as_storage_sd_reg_read_data	 *data_p,
-	/* Callback function to call when done. */
-	cy_as_function_callback	cb,
-	/* Call context to send to the cb function. */
-	uint32_t	client
-	);
-
-EXTERN cy_as_return_status_t
-cy_as_storage_create_p_partition_dep(
-		cy_as_device_handle	 handle,
-		cy_as_media_type		media,
-		uint32_t			 device,
-		uint32_t			 size,
-		cy_as_function_callback cb,
-		uint32_t			 client);
-
-EXTERN cy_as_return_status_t
-cy_as_storage_remove_p_partition_dep(
-		cy_as_device_handle		handle,
-		cy_as_media_type		   media,
-		uint32_t				device,
-		cy_as_function_callback	cb,
-		uint32_t				client);
-
-#endif /*__doxygen*/
-
-#endif /*__INCLUDED_CYANSTORAGE_DEP_H__*/
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyastoria.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyastoria.h
deleted file mode 100644
index b1b18d0685e4..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyastoria.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Cypress West Bridge API header file (cyastioch.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASTORIA_H_
-#define _INCLUDED_CYASTORIA_H_
-
-#if !defined(__doxygen__)
-
-#include "cyaserr.h"
-#include "cyasmisc.h"
-#include "cyasstorage.h"
-#include "cyasusb.h"
-#include "cyasmtp.h"
-
-#endif
-
-#endif
-
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyastsdkversion.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyastsdkversion.h
deleted file mode 100644
index a3c10aa559e2..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyastsdkversion.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Cypress Astoria Sdk Version file (cyastsdkversion.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street, Fifth Floor
-## Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASTSDK_VERSION_H_
-#define _INCLUDED_CYASTSDK_VERSION_H_
-
-/* Astoria SDK version 1.2.1 */
-#define CYAS_MAJOR_VERSION (1)
-#define CYAS_MINOR_VERSION (2)
-#define CYAS_BUILD_NUMBER (197)
-
-#endif /*_INCLUDED_CYASTSDK_VERSION_H_*/
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyastypes.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyastypes.h
deleted file mode 100644
index 18043c1f38da..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyastypes.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* Cypress West Bridge API header file (cyastypes.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASTYPES_H_
-#define _INCLUDED_CYASTYPES_H_
-/* moved to staging location, eventual implementation
- * considered is here
-#include <mach/westbridge/cyashaldef.h>
-*/
- #include "../../../arch/arm/plat-omap/include/mach/westbridge/cyashaldef.h"
-
-/* Types that are not available on specific platforms.
- * These are used only in the reference HAL implementations and
- * are not required for using the API.
- */
-#ifdef __unix__
-typedef unsigned long DWORD;
-typedef void *LPVOID;
-#define WINAPI
-#define INFINITE		(0xFFFFFFFF)
-#define ptr_to_uint(ptr)  ((unsigned int)(ptr))
-#endif
-
-/* Basic types used by the entire API */
-
-/* Summary
-   This type represents an endpoint number
-*/
-typedef uint8_t cy_as_end_point_number_t;
-
-/* Summary
-   This type is used to return status information from
-	an API call.
-*/
-typedef uint16_t cy_as_return_status_t;
-
-/* Summary
-   This type represents a bus number
-*/
-typedef uint32_t cy_as_bus_number_t;
-
-/* Summary
-   All APIs provided with this release are marked extern
-   through this definition. This definition can be changed
-   to meet the scope changes required in the user build
-   environment.
-
-   For example, this can be changed to __declspec(exportdll)
-   to enable exporting the API from a DLL.
- */
-#define EXTERN		  extern
-
-#endif
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h
deleted file mode 100644
index e3ba9ca4c75f..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h
+++ /dev/null
@@ -1,1862 +0,0 @@
-/* Cypress West Bridge API header file (cyasusb.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-#ifndef _INCLUDED_CYASUSB_H_
-#define _INCLUDED_CYASUSB_H_
-
-#include "cyasmisc.h"
-
-#include "cyas_cplus_start.h"
-
-/*@@Enumeration Model
-  Summary
-  The USB enumeration process is the process of communicating
-  to the USB host information
-  about the capabilities of the connected device.  This
-  process is completed by servicing
-  requests for various types of descriptors.  In the software
-  APIs described below, this
-  process is controlled in one of two ways.
-
-  Description
-  There are advantages to either type of enumeration
-  and this is why both models are supported.
-  P Port processor based enumeraton gives the P port
-  processor maximum control and flexibility
-  for providing USB configuration information.  However,
-  this does require (near) real time data
-  responses from the P port processor during the enumeration
-  process.  West Bridge based enumeration
-  requires no real time information from the P port processor,
-  ensuring the fastest possible
-  enumeration times.
-
-  * P Port Based Enumeration *
-  The first method for handling USB enumeration is for the
-  processor client to handle all
-  endpoint zero requests for descriptors.  This mode is
-  configured by indicating to the API
-  that the processor wants to handle all endpoint zero
-  requests. This is done by setting
-  bit 0 in the end_point_mask to a 1.  The processor uses
-  CyAsUsbReadDataAsync() to read the request and
-  CyAsUsbWriteDataAsync() to write the response.
-
-  * West Bridge Based Enumeration *
-  The second method for handling USB enumeration is the
-  configuration information method.
-  Before enabling a connection from the West Bridge device
-  to the USB connector, the P Port
-  processor sends information about the USB configuration to
-  West Bridge through the configuration
-  APIs.  This information is stored within the West Bridge
-  device.  When a USB cable is attached,
-  the West Bridge device then handles all descriptor requests
-  based on the stored information.
-  Note that this method of enumeration only supports a single
-  USB configuration.
-
-  In either model of enumeration, the processor client is
-  responsible for ensuring that
-  the system meets USB Chapter 9 compliance requirements. This
-  can be done by providing spec
-  compliant descriptors, and handling any setup packets that
-  are sent to the client
-  appropriately.
-
-  Mass storage class compliance will be ensured by the West
-  Bridge firmware when the mass
-  storage functionality is enabled.
-*/
-
-/*@@Endpoint Configuration
-  Summary
-  The West Bridge device has one 64-byte control endpoint, one
-  64-byte low bandwidth endpoint, four bulk
-  endpoints dedicated for mass storage usage, and up to ten
-  bulk/interrupt/isochronous
-  endpoints that can be used for USB-to-Processor communication.
-
-  Description
-  The four storage endpoints (Endpoints 2, 4, 6 and 8) are
-  reserved for accessing storage
-  devices attached to West Bridge and are not available for use
-  by the processor.  These are
-  used implicitly when using the storage API to read/write to
-  the storage media.
-
-  Endpoint 0 is the standard USB control pipe used for all
-  enumeration activity.  Though
-  the endpoint buffer is not directly accessible from the
-  processor, read/write activity
-  can be performed on this endpoint through the API layers.
-  This endpoint is always
-  configured as a bi-directional control endpoint.
-
-  Endpoint 1 is a 64-byte endpoint that can be used for low
-  bandwidth bulk/interrupt
-  activity.  The physical buffer is not accessible from the
-  processor, but can be read/written
-  through the API.  As the data coming to this endpoint is
-  being handled through the
-  software layers, there can be loss of data if a read call
-  is not waiting when an OUT
-  packet arrives.
-
-  Endpoints 3, 5, 7, 9, 10, 11, 12, 13, 14 and 15 are ten
-  configurable endpoints
-  mapped to parts of a total 4 KB FIFO buffer space on the
-  West Bridge device.  This 4 KB
-  physical buffer space is divided into up to four endpoints
-  called PEP1, PEP2, PEP3 and PEP4
-  in this software document.  There are multiple configurations
-  in which this buffer space
-  can be used, and the size and number of buffers available to
-  each physical endpoint
-  vary between these configurations.  See the West Bridge PDD
-  for details on the buffer
-  orientation corresponding to each configuration.
-
-  * Note *
-  PEPs 1, 2, 3 and 4 are called Physical EP 3, 5, 7 and 9 in the
-  West Bridge PDD.  The
-  sequential number scheme is used in the software to disambiguate
-  these from the logical
-  endpoint numbers, and also for convenience of array indexing.
-*/
-
-#if !defined(__doxygen__)
-
-
-#endif
-
-/* Summary
-   This constants defines the maximum size of a USB descriptor
-   when referenced via the CyAsUsbSetDescriptor or
-   CyAsUsbGetDescriptor functions.
-
-   See Also
-   * CyAsUsbSetDescriptor
-   * CyAsUsbGetDescriptor
-*/
-#define CY_AS_MAX_USB_DESCRIPTOR_SIZE	(128)
-
-/***************************************
- * West Bridge Types
- ***************************************/
-
-
-/* Summary
-   This data structure is the data passed via the evdata paramater
-   on a usb event callback for the inquiry request.
-
-   Description
-   When a SCSI inquiry request arrives via the USB connection and
-   the P Port has asked
-   to receive inquiry requests, this request is forwarded to the
-   client via the USB
-   callback.  This callback is called twice, once before the
-   inquiry data is forwarded
-   to the host (CyAsEventUsbInquiryBefore) and once after the
-   inquiry has been sent to the
-   USB host (CyAsEventUsbInquiryAfter).  The evdata parameter
-   is a pointer to this data
-   structure.
-
-   *CyAsEventUsbInquiryBefore*
-   If the client just wishes to see the inquiry request and
-   associated data, then a simple
-   return from the callback will forward the inquiry response
-   to the USB host.  If the
-   client wishes to change the data returned to the USB host,
-   the updated parameter must
-   be set to CyTrue and the memory area address by the data
-   parameter should be updated.
-   The data pointer can be changed to point to a new memory
-   area and the length field
-   changed to change the amount of data returned from the
-   inquiry request.  Note that the
-   data area pointed to by the data parameter must remain
-   valid and the contents must
-   remain consistent until after the CyAsEventUsbInquiryAfter
-   event has occurred.  THE LENGTH
-   MUST BE LESS THAN 192 BYTES OR THE CUSTOM INQUIRY RESPONSE
-   WILL NOT BE RETURNED.  If the
-   length is too long, the default inquiry response will be
-   returned.
-
-   *CyAsEventUsbInquiryAfter*
-   If the client needs to free any data, this event signals that
-   the data associated with the inquiry is no longer needed.
-
-   See Also
-   * CyAsUsbEventCallback
-   * CyAsUsbRegisterCallback
-*/
-typedef struct cy_as_usb_inquiry_data {
-	/* The bus for the event */
-	cy_as_bus_number_t bus;
-	/* The device the event */
-	uint32_t device;
-	/* The EVPD bit from the SCSI INQUIRY request */
-	uint8_t evpd;
-	/* The codepage in the inquiry request */
-	uint8_t codepage;
-	/* This bool must be set to CyTrue indicate that the inquiry
-				   data was changed */
-	cy_bool updated;
-	/* The length of the data */
-	uint16_t length;
-	/* The inquiry data */
-	void *data;
-} cy_as_usb_inquiry_data;
-
-
-/* Summary
-   This data structure is the data passed via the evdata
-   parameter on a usb event
-   callback for the unknown mass storage request.
-
-   Description
-   When a SCSI request is made that the mass storage
-   firmware in West Bridge does not
-   know how to process, this request is passed to the
-   processor for handling via
-   the usb callback.  This data structure is used to
-   pass the request and the
-   associated response.  The user may set the status
-   to indicate the status of the
-   request.  The status value is the bCSWStatus value
-   from the USB mass storage
-   Command Status Wrapper (0 = command passed, 1 =
-   command failed).  If the status
-   is set to command failed (1), the sense information
-   should be set as well.  For
-   more information about sense information, see the
-   USB mass storage specification
-   as well as the SCSI specifications for block devices.
-   By default the status is
-   initialized to 1 (failure) with a sense information
-   of 05h/20h/00h which
-   indicates INVALID COMMAND.
-*/
-typedef struct cy_as_usb_unknown_command_data {
-	/* The bus for the event */
-	cy_as_bus_number_t bus;
-	/* The device for the event */
-	uint32_t device;
-
-	uint16_t reqlen;
-	/* The request */
-	void *request;
-
-	/* The returned status value for the command */
-	uint8_t status;
-	/* If status is failed, the sense key */
-	uint8_t key;
-	/* If status is failed, the additional sense code */
-	uint8_t asc;
-	/* If status if failed, the additional sense code qualifier */
-	uint8_t ascq;
-} cy_as_usb_unknown_command_data;
-
-
-/* Summary
-   This data structure is the data passed via the evdata
-   paramater on a usb event callback for the start/stop request.
-
-   Description
-   When a SCSI start stop request arrives via the USB connection
-   and the P Port has asked
-
-   See Also
-   * CyAsUsbEventCallback
-   * CyAsUsbRegisterCallback
-*/
-typedef struct cy_as_usb_start_stop_data {
-	/* The bus for the event */
-	cy_as_bus_number_t bus;
-	/* The device for the event */
-	uint32_t device;
-	/* CyTrue means start request, CyFalse means stop request */
-	cy_bool start;
-	/* CyTrue means LoEj bit set, otherwise false */
-	cy_bool loej;
-} cy_as_usb_start_stop_data;
-
-/* Summary
-   This data type is used to indicate which mass storage devices
-   are enumerated.
-
-   Description
-
-   See Also
-   * CyAsUsbEnumControl
-   * CyAsUsbSetEnumConfig
-*/
-typedef enum cy_as_usb_mass_storage_enum {
-	cy_as_usb_nand_enum = 0x01,
-	cy_as_usb_sd_enum = 0x02,
-	cy_as_usb_mmc_enum = 0x04,
-	cy_as_usb_ce_ata_enum = 0x08
-} cy_as_usb_mass_storage_enum;
-
-/* Summary
-   This data type specifies the type of descriptor to transfer
-   to the West Bridge device
-
-   Description
-   During enumeration, if West Bridge is handling enumeration,
-   the West Bridge device needs to USB descriptors
-   to complete the enumeration.  The function CyAsUsbSetDescriptor()
-   is used to transfer the descriptors
-   to the West Bridge device.  This type is an argument to that
-   function and specifies which descriptor
-   is being transferred.
-
-   See Also
-   * CyAsUsbSetDescriptor
-   * CyAsUsbGetDescriptor
-*/
-typedef enum cy_as_usb_desc_type {
-	/* A device descriptor - See USB 2.0 specification Chapter 9 */
-	cy_as_usb_desc_device = 1,
-	/* A device descriptor qualifier -
-	 *  See USB 2.0 specification Chapter 9 */
-	cy_as_usb_desc_device_qual = 2,
-	/* A configuration descriptor for FS operation -
-	 * See USB 2.0 specification Chapter 9 */
-	cy_as_usb_desc_f_s_configuration = 3,
-	/* A configuration descriptor for HS operation -
-	 * See USB 2.0 specification Chapter 9 */
-	cy_as_usb_desc_h_s_configuration = 4,
-	cy_as_usb_desc_string = 5
-} cy_as_usb_desc_type;
-
-/* Summary
-   This type specifies the direction of an endpoint
-
-   Description
-   This type is used when configuring the endpoint hardware
-   to specify the direction
-   of the endpoint.
-
-   See Also
-   * CyAsUsbEndPointConfig
-   * CyAsUsbSetEndPointConfig
-   * CyAsUsbGetEndPointConfig
-*/
-typedef enum cy_as_usb_end_point_dir {
-	/* The endpoint direction is IN (West Bridge -> USB Host) */
-	cy_as_usb_in = 0,
-	/* The endpoint direction is OUT (USB Host -> West Bridge) */
-	cy_as_usb_out = 1,
-	/* The endpoint direction is IN/OUT (valid only for EP 0 & 1) */
-	cy_as_usb_in_out = 2
-} cy_as_usb_end_point_dir;
-
-/* Summary
-   This type specifies the type of an endpoint
-
-   Description
-   This type is used when configuring the endpoint hardware
-   to specify the type of endpoint.
-
-   See Also
-   * CyAsUsbEndPointConfig
-   * CyAsUsbSetEndPointConfig
-   * CyAsUsbGetEndPointConfig
-*/
-typedef enum cy_as_usb_end_point_type {
-	cy_as_usb_control,
-	cy_as_usb_iso,
-	cy_as_usb_bulk,
-	cy_as_usb_int
-} cy_as_usb_end_point_type;
-
-/* Summary
-   This type is a structure used to indicate the top level
-   configuration of the USB stack
-
-   Description
-   In order to configure the USB stack, the CyAsUsbSetEnumConfig()
-   function is called to indicate
-   how mass storage is to be handled, the specific number of
-   interfaces to be supported if
-   West Bridge is handling enumeration, and the end points of
-   specifi interest.  This structure
-   contains this information.
-
-   See Also
-   * CyAsUsbSetConfig
-   * CyAsUsbGetConfig
-   * <LINK Enumeration Model>
-*/
-typedef struct cy_as_usb_enum_control {
-	/* Designate which devices on which buses to enumerate */
-	cy_bool devices_to_enumerate[CY_AS_MAX_BUSES]
-		[CY_AS_MAX_STORAGE_DEVICES];
-	/* If true, West Bridge will control enumeration.  If this
-	 * is false the P port controls enumeration.  if the P port
-	 * is controlling enumeration, traffic will be received via
-	 * endpoint zero. */
-	cy_bool antioch_enumeration;
-	/* This is the interface # to use for the mass storage
-	 * interface, if mass storage is enumerated.  if mass
-	 * storage is not enumerated this value should be zero. */
-	uint8_t mass_storage_interface;
-	/* This is the interface # to use for the MTP interface,
-	 * if MTP is enumerated.  if MTP is not enumerated
-	 * this value should be zero. */
-	uint8_t mtp_interface;
-	/* If true, Inquiry, START/STOP, and unknown mass storage
-	 * requests cause a callback to occur for handling by the
-	 *  baseband processor. */
-	cy_bool mass_storage_callbacks;
-} cy_as_usb_enum_control;
-
-
-/* Summary
-   This structure is used to configure a single endpoint
-
-   Description
-   This data structure contains all of the information required
-   to configure the West Bridge hardware
-   associated with a given endpoint.
-
-   See Also
-   * CyAsUsbSetEndPointConfig
-   * CyAsUsbGetEndPointConfig
-*/
-typedef struct cy_as_usb_end_point_config {
-	/* If true, this endpoint is enabled */
-	cy_bool enabled;
-	/* The direction of this endpoint */
-	cy_as_usb_end_point_dir dir;
-	/* The type of endpoint */
-	cy_as_usb_end_point_type type;
-	/* The physical endpoint #, 1, 2, 3, 4 */
-	cy_as_end_point_number_t physical;
-	/* The size of the endpoint in bytes */
-	uint16_t size;
-} cy_as_usb_end_point_config;
-
-/* Summary
-   List of partition enumeration combinations that can
-   be selected on a partitioned storage device.
-
-   Description
-   West Bridge firmware supports creating up to two
-   partitions on mass storage devices connected to
-   West Bridge.  When there are two partitions on a device,
-   the user can choose which of these partitions should be
-   made visible to a USB host through the mass storage
-   interface.  This enumeration lists the various enumeration
-   selections that can be made.
-
-   See Also
-   * CyAsStorageCreatePPartition
-   * CyAsStorageRemovePPartition
-   * CyAsUsbSelectMSPartitions
- */
-typedef enum cy_as_usb_m_s_type_t {
-	/* Enumerate only partition 0 as CD (autorun) device */
-	cy_as_usb_m_s_unit0 = 0,
-	/* Enumerate only partition 1 as MS device (default setting) */
-	cy_as_usb_m_s_unit1,
-	/* Enumerate both units */
-	cy_as_usb_m_s_both
-} cy_as_usb_m_s_type_t;
-
-/* Summary
-   This type specifies the type of USB event that has occurred
-
-   Description
-   This type is used in the USB event callback function to
-   indicate the type of USB event that has occurred.  The callback
-   function includes both this reasons for the callback and a data
-   parameter associated with the reason.  The data parameter is used
-   in a reason specific way and is documented below with each reason.
-
-   See Also
-   * CyAsUsbIoCallback
-*/
-typedef enum cy_as_usb_event {
-	/* This event is sent when West Bridge is put into the suspend
-	state by the USB host.  the data parameter is not used and
-	will be zero. */
-	cy_as_event_usb_suspend,
-	/* This event is sent when West Bridge is taken out of the
-	suspend state by the USB host.  the data parameter is not
-	used and will be zero. */
-	cy_as_event_usb_resume,
-	/* This event is sent when a USB reset request is received
-	by the west bridge device.  the data parameter is not used and
-	will be zero. */
-	cy_as_event_usb_reset,
-	/* This event is sent when a USB set configuration request is made.
-	the data parameter is a pointer to a uint16_t that contains the
-	configuration number.  the configuration number may be zero to
-	indicate an unconfigure operation. */
-	cy_as_event_usb_set_config,
-	/* This event is sent when the USB connection changes speed. This is
-	generally a transition from full speed to high speed.  the parameter
-	to this event is a pointer to uint16_t that gives the speed of the
-	USB connection.  zero indicates full speed, one indicates high speed */
-	cy_as_event_usb_speed_change,
-	/* This event is sent when a setup packet is received.
-	 * The data parameter is a pointer to the eight bytes of setup data. */
-	cy_as_event_usb_setup_packet,
-	/* This event is sent when a status packet is received.  The data
-	parameter is not used. */
-	cy_as_event_usb_status_packet,
-	/* This event is sent when mass storage receives an inquiry
-	request and we have asked to see these requests. */
-	cy_as_event_usb_inquiry_before,
-	/* This event is sent when mass storage has finished processing an
-	inquiry request and any data associated with the request is no longer
-	required. */
-	cy_as_event_usb_inquiry_after,
-	/* This event is sent when mass storage receives a start/stop
-	 * request and we have asked to see these requests */
-	cy_as_event_usb_start_stop,
-	/* This event is sent when a Clear Feature request is received.
-	 * The data parameter is the endpoint number. */
-	cy_as_event_usb_clear_feature,
-	/* This event is sent when mass storage receives a request
-	 * that is not known and we have asked to see these requests */
-	cy_as_event_usb_unknown_storage,
-	/* This event is sent when the read/write activity on the USB mass
-	storage has crossed a pre-set level */
-	cy_as_event_usb_m_s_c_progress
-} cy_as_usb_event;
-
-/* Summary
-   This type is the type of a callback function that is
-   called when a USB event occurs
-
-   Description
-   At times West Bridge needs to inform the P port processor
-   of events that have
-   occurred.  These events are asynchronous to the thread of
-   control on the P
-   port processor and as such are generally delivered via a
-   callback function that
-   is called as part of an interrupt handler.  This type
-   defines the type of function
-   that must be provided as a callback function for USB events.
-
-   See Also
-   * CyAsUsbEvent
-*/
-typedef void (*cy_as_usb_event_callback)(
-	/* Handle to the device to configure */
-	cy_as_device_handle			handle,
-	/* The event type being reported */
-	cy_as_usb_event			ev,
-	/* The data assocaited with the event being reported */
-	void *evdata
-);
-
-
-/* Summary
-   This type is the callback function called after an
-   asynchronous USB read/write operation
-
-   Description
-   This function type defines a callback function that is
-   called at the completion of any
-   asynchronous read or write operation.
-
-   See Also
-   * CyAsUsbReadDataAsync
-   * CyAsUsbWriteDataAsync
-   * CY_AS_ERROR_CANCELED
-*/
-typedef void (*cy_as_usb_io_callback)(
-	/* Handle to the device to configure */
-	cy_as_device_handle	handle,
-	/* The endpoint that has completed an operation */
-	cy_as_end_point_number_t ep,
-	/* THe amount of data transferred to/from USB */
-	uint32_t count,
-	/* The data buffer for the operation */
-	void *buffer,
-	/* The error status of the operation */
-	cy_as_return_status_t status
-);
-
-/* Summary
-   This type is the callback function called after asynchronous
-   API functions have completed.
-
-   Description
-   When calling API functions from callback routines (interrupt
-   handlers usually) the async version of
-   these functions must be used.  This callback is called when an
-   asynchronous API function has completed.
-*/
-typedef void (*cy_as_usb_function_callback)(
-	/* Handle to the device to configure */
-	cy_as_device_handle			handle,
-	/* The error status of the operation */
-	cy_as_return_status_t			status,
-	/* A client supplied 32 bit tag */
-	uint32_t				client
-);
-
-
-/********************************************
- * West Bridge Functions
- ********************************************/
-
-/* Summary
-   This function starts the USB stack
-
-   Description
-   This function initializes the West Bridge USB software
-   stack if it has not yet been stared.
-   This initializes any required data structures and powers
-   up any USB specific portions of
-   the West Bridge hardware.  If the stack had already been
-   started, the USB stack reference count
-   is incremented.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Notes
-   This function cannot be called from any type of West Bridge
-   callback.
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_SUCCESS - the stack initialized and is ready
-   *	for use
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
-   *	with the West Bridge device
-
-   See Also
-   * CyAsUsbStop
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_start(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The callback if async call */
-	cy_as_function_callback		cb,
-	/* Client supplied data */
-	uint32_t			client
-	);
-
-/* Summary
-   This function stops the USB stack
-
-   Description
-   This function decrements the reference count for
-   the USB stack and if this count
-   is zero, the USB stack is shut down.  The shutdown
-   frees all resources associated
-   with the USB stack.
-
-   * Valid In Asynchronous Callback: NO
-
-   Notes
-   While all resources associated with the USB stack will
-   be freed is a shutdown occurs,
-   resources associated with underlying layers of the software
-   will not be freed if they
-   are shared by the storage stack and the storage stack is active.
-   Specifically the DMA manager,
-   the interrupt manager, and the West Bridge communications module
-   are all shared by both the
-   USB stack and the storage stack.
-
-   Returns
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-
-   See Also
-   * CyAsUsbStart
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_stop(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The callback if async call */
-	cy_as_function_callback		cb,
-	 /* Client supplied data */
-	uint32_t			client
-	);
-
-/* Summary
-   This function registers a callback function to be called when an
-   asynchronous USB event occurs
-
-   Description
-   When asynchronous USB events occur, a callback function can be
-   called to alert the calling program.  This
-   functions allows the calling program to register a callback.
-
-   * Valid In Asynchronous Callback: YES
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_register_callback(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The function to call */
-	cy_as_usb_event_callback callback
-	);
-
-
-/* Summary
-   This function connects the West Bridge device D+ and D- signals
-   physically to the USB host.
-
-   Description
-   The West Bridge device has the ability to programmatically
-   disconnect the USB pins on the device
-   from the USB host.  This feature allows for re-enumeration of
-   the West Bridge device as a different
-   device when necessary.  This function connects the D+ and D-
-   signal physically to the USB host
-   if they have been previously disconnected.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-
-   See Also
-   * CyAsUsbDisconnect
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_connect(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The callback if async call */
-	cy_as_function_callback	cb,
-	/* Client supplied data */
-	uint32_t client
-	);
-
-/* Summary
-   This function disconnects the West Bridge device D+ and D-
-   signals physically from the USB host.
-
-   Description
-   The West Bridge device has the ability to programmatically
-   disconnect the USB pins on the device
-   from the USB host.  This feature allows for re-enumeration
-   of the West Bridge device as a different
-   device when necessary.  This function disconnects the D+
-   and D- signal physically from the USB host
-   if they have been previously connected.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-
-   See Also
-   * CyAsUsbConnect
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_disconnect(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The callback if async call */
-	cy_as_function_callback	cb,
-	/* Client supplied data */
-	uint32_t client
-	);
-
-/* Summary
-   This function configures the USB stack
-
-   Description
-   This function is used to configure the USB stack.  It is
-   used to indicate which endpoints are going to
-   be used, and how to deal with the mass storage USB device
-   within West Bridge.
-
-   * Valid In Asynchronous Callback: Yes (if cb supplied)
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-
-   See Also
-   * CyAsUsbGetEnumConfig
-   * CyAsUsbEnumControl
- */
-EXTERN cy_as_return_status_t
-cy_as_usb_set_enum_config(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The USB configuration information */
-	cy_as_usb_enum_control *config_p,
-	/* The callback if async call */
-	cy_as_function_callback	cb,
-	/* Client supplied data */
-	uint32_t client
-	);
-
-/* Summary
-   This function retreives the current configuration of
-   the USB stack
-
-   Description
-   This function sends a request to West Bridge to retrieve
-   the current configuration
-
-   * Valid In Asynchronous Callback: Yes (if cb supplied)
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-
-   See Also
-   * CyAsUsbSetConfig
-   * CyAsUsbConfig
- */
-EXTERN cy_as_return_status_t
-cy_as_usb_get_enum_config(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The return value for USB congifuration information */
-	cy_as_usb_enum_control *config_p,
-	/* The callback if async call */
-	cy_as_function_callback	cb,
-	/* Client supplied data */
-	uint32_t client
-	);
-
-/* Summary
-   This function sets the USB descriptor
-
-   Description
-   This function is used to set the various descriptors
-   assocaited with the USB enumeration
-   process.  This function should only be called when the
-   West Bridge enumeration model is selected.
-   Descriptors set using this function can be cleared by
-   stopping the USB stack, or by calling
-   the CyAsUsbClearDescriptors function.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Notes
-   These descriptors are described in the USB 2.0 specification,
-   Chapter 9.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_DESCRIPTOR - the descriptor passed is
-   *	not valid
-   * CY_AS_ERROR_BAD_INDEX - a bad index was given for the type
-   *	of descriptor given
-   * CY_AS_ERROR_BAD_ENUMERATION_MODE - this function cannot be
-   *	called if the P port processor doing enumeration
-
-   See Also
-   * CyAsUsbGetDescriptor
-   * CyAsUsbClearDescriptors
-   * <LINK Enumeration Model>
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_set_descriptor(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The type of descriptor */
-	cy_as_usb_desc_type	type,
-	/* Only valid for string descriptors */
-	uint8_t	index,
-	/* The descriptor to be transferred */
-	void *desc_p,
-	/* The length of the descriptor in bytes */
-	uint16_t length,
-	/* The callback if async call */
-	cy_as_function_callback		cb,
-	/* Client supplied data */
-	uint32_t client
-	);
-
-/* Summary
-   This function clears all user descriptors stored
-   on the West Bridge.
-
-   Description
-   This function is used to clear all descriptors that
-   were previously
-   stored on the West Bridge through CyAsUsbSetDescriptor
-   calls, and go back
-   to the default descriptor setup in the firmware.  This
-   function should
-   only be called when the Antioch enumeration model is
-   selected.
-
-   * Valid In Asynchronous Callback: Yes (if cb supplied)
-   * Nestable: Yes
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - all descriptors cleared successfully
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_BAD_ENUMERATION_MODE - this function cannot be
-   * called if the P port processor is doing enumeration
-
-   See Also
-   * CyAsUsbSetDescriptor
-   * <LINK Enumeration Model>
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_clear_descriptors(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The callback if async call */
-	cy_as_function_callback	cb,
-	/* Client supplied data */
-	uint32_t client
-	);
-/* Summary
-   This structure contains the descriptor buffer to be
-   filled by CyAsUsbGetDescriptor API.
-
-   Description
-   This data structure the buffer to hold the descriptor
-   data, and an in/out parameter ti indicate the
-   length of the buffer and descriptor data in bytes.
-
-   See Also
-   * CyAsUsbGetDescriptor
-*/
-typedef struct cy_as_get_descriptor_data {
-	/* The buffer to hold the returned descriptor */
-	void *desc_p;
-	/* This is an input and output parameter.
-	 * Before the code this pointer points to a uint32_t
-	 * that contains the length of the buffer.  after
-	 * the call, this value contains the amount of data
-	 * actually returned. */
-	uint32_t	 length;
-
-} cy_as_get_descriptor_data;
-
-/* Summary
-   This function retreives a given descriptor from the
-   West Bridge device
-
-   Description
-   This function retreives a USB descriptor from the West
-   Bridge device.  This function should only be called when the
-   West Bridge enumeration model is selected.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Notes
-   These descriptors are described in the USB 2.0 specification,
-   Chapter 9.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_BAD_INDEX - a bad index was given for the type of
-   * descriptor given
-   * CY_AS_ERROR_BAD_ENUMERATION_MODE - this function cannot be
-   * called if the P port processor doing enumeration
-
-   See Also
-   * CyAsUsbSetDescriptor
-   * <LINK Enumeration Model>
-*/
-
-EXTERN cy_as_return_status_t
-cy_as_usb_get_descriptor(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The type of descriptor */
-	cy_as_usb_desc_type	type,
-	/* Index for string descriptor */
-	uint8_t	index,
-	/* Parameters and return value for the get descriptor call */
-	cy_as_get_descriptor_data *data,
-	/* The callback if async call */
-	cy_as_function_callback	cb,
-	/* Client supplied data */
-	uint32_t client
-	);
-
-/* Summary
-   This function sets the configuration of the physical
-   endpoints into one of the twelve supported configuration
-
-   Description
-   USB endpoints are mapped onto one of four physical
-   endpoints in the device.  Therefore
-   USB endpoints are known as logical endpoints and these
-   logical endpoints are mapped to
-   one of four physical endpoints.  In support of these
-   four physical endpoints there is
-   four kilo-bytes of buffer spaces that can be used as
-   buffers for these physical endpoints.
-   This 4K of buffer space can be configured in one of
-   twelve ways.  This function sets the
-   buffer configuration for the physical endpoints.
-
-   * Config  1: PEP1 (2 * 512), PEP2 (2 * 512),
-   *	PEP3 (2 * 512), PEP4 (2 * 512)
-   * Config  2: PEP1 (2 * 512), PEP2 (2 * 512),
-   *	PEP3 (4 * 512), PEP4 (N/A)
-   * Config  3: PEP1 (2 * 512), PEP2 (2 * 512),
-   *	PEP3 (2 * 1024), PEP4(N/A)
-   * Config  4: PEP1 (4 * 512), PEP2 (N/A),
-   *	PEP3 (2 * 512), PEP4 (2 * 512)
-   * Config  5: PEP1 (4 * 512), PEP2 (N/A),
-   *	PEP3 (4 * 512), PEP4 (N/A)
-   * Config  6: PEP1 (4 * 512), PEP2 (N/A),
-   *	PEP3 (2 * 1024), PEP4 (N/A)
-   * Config  7: PEP1 (2 * 1024), PEP2 (N/A),
-   *	PEP3 (2 * 512), PEP4 (2 * 512)
-   * Config  8: PEP1 (2 * 1024), PEP2 (N/A),
-   *	PEP3 (4 * 512), PEP4 (N/A)
-   * Config  9: PEP1 (2 * 1024), PEP2 (N/A),
-   *	PEP3 (2 * 1024), PEP4 (N/A)
-   * Config 10: PEP1 (3 * 512), PEP2 (N/A),
-   *	PEP3 (3 * 512), PEP4 (2 * 512)
-   * Config 11: PEP1 (3 * 1024), PEP2 (N/A),
-   *	PEP3 (N/A), PEP4 (2 * 512)
-   * Config 12: PEP1 (4 * 1024), PEP2 (N/A),
-   *	PEP3 (N/A), PEP4 (N/A)
-
-   * Valid In Asynchronous Callback: NO
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_CONFIGURATION - the configuration given
-   *	is not between 1 and 12
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_set_physical_configuration(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The physical endpoint configuration number */
-	uint8_t			config
-	);
-
-/* Summary
-   This function sets the hardware configuration for a given endpoint
-
-   Description
-   This function sets the hardware configuration for a given endpoint.
-   This is the method to set the direction of the endpoint, the type
-   of endpoint, the size of the endpoint buffer, and the buffering
-   style for the endpoint.
-
-   * Valid In Asynchronous Callback: NO
-
-   Notes
-   Add documentation about endpoint configuration limitations
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint parameter is invalid
-   * CY_AS_ERROR_INVALID_CONFIGURATION - the endpoint configuration
-   *	given is not valid
-   * CY_AS_ERROR_ENDPOINT_CONFIG_NOT_SET - the physical endpoint
-   *	configuration is not set
-
-   See Also
-   * CyAsUsbGetEndPointConfig
-   * CyAsUsbEndPointConfig
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_set_end_point_config(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t ep,
-	/* The configuration information for the endpoint */
-	cy_as_usb_end_point_config *config_p
-	);
-
-/* Summary
-   This function retreives the hardware configuration for
-   a given endpoint
-
-   Description
-   This function gets the hardware configuration for the given
-   endpoint.  This include information about the direction of
-   the endpoint, the type of endpoint, the size of the endpoint
-   buffer, and the buffering style for the endpoint.
-
-   * Valid In Asynchronous Callback: NO
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint parameter is
-   *	invalid
-
-   See Also
-   * CyAsUsbSetEndPointConfig
-   * CyAsUsbEndPointConfig
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_get_end_point_config(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint of interest*/
-	cy_as_end_point_number_t ep,
-	/* The return value containing the endpoint config
-	 * information */
-	cy_as_usb_end_point_config *config_p
-	);
-
-/* Summary
-   This function commits the configuration information that
-   has previously been set.
-
-   Description
-   The initialization process involves calling CyAsUsbSetEnumConfig()
-   and CyAsUsbSetEndPointConfig(). These
-   functions do not actually send the configuration information to
-   the West Bridge device.  Instead, these
-   functions store away the configuration information and this
-   CyAsUsbCommitConfig() actually finds the
-   best hardware configuration based on the requested endpoint
-   configuration and sends this optimal
-   confiuration down to the West Bridge device.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - a configuration was found and sent
-   *	to West Bridge
-   * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
-   *	into West Bridge
-   * CY_AS_ERROR_INVALID_CONFIGURATION - the configuration requested
-   *	is not possible
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-
-   See Also
-   * CyAsUsbSetEndPointConfig
-   * CyAsUsbSetEnumConfig
-*/
-
-EXTERN cy_as_return_status_t
-cy_as_usb_commit_config(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The callback if async call */
-	cy_as_function_callback		cb,
-	/* Client supplied data */
-	uint32_t client
-	);
-
-/* Summary
-   This function reads data from a USB endpoint.
-
-   Description
-   This function reads data from an OUT.  This function blocks
-   until the read is complete.
-   If this is a packet read, a single received USB packet will
-   complete the read.  If this
-   is not a packet read, this function will block until all of
-   the data requested has been
-   recevied.
-
-   * Valid In Asynchronous Callback: NO
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint parameter is
-   *	invalid
-
-   See Also
-   * CyAsUsbReadDataAsync
-   * CyAsUsbWriteData
-   * CyAsUsbWriteDataAsync
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_read_data(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t		ep,
-	/* If CyTrue, this is a packet read */
-	cy_bool				pktread,
-	/* The amount of data to read */
-	uint32_t			dsize,
-	/* The amount of data read */
-	uint32_t *dataread,
-	/* The buffer to hold the data read */
-	void *data
-	);
-
-/* Summary
-   This function reads data from a USB endpoint
-
-   Description
-   This function reads data from an OUT endpoint. This
-   function will return immediately and the callback
-   provided will be called when the read is complete.
-   If this is a packet read, then the callback will be
-   called on the next received packet.  If this is not a
-   packet read, the callback will be called when the
-   requested data is received.
-
-   * Valid In Asynchronous Callback: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint parameter is
-   *	invalid
-
-   See Also
-   * CyAsUsbReadData
-   * CyAsUsbWriteData
-   * CyAsUsbWriteDataAsync
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_read_data_async(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t		ep,
-	/* If CyTrue, this is a packet read */
-	cy_bool		pktread,
-	/* The amount of data to read */
-	uint32_t	dsize,
-	/* The buffer for storing the data */
-	void *data,
-	/* The callback function to call when the data is read */
-	cy_as_usb_io_callback		callback
-	);
-
-/* Summary
-   This function writes data to a USB endpoint
-
-   Description
-   This function writes data to an IN endpoint data buffer.
-   Multiple USB packets may be sent until all data requeste
-   has been sent.  This function blocks until all of the data
-   has been sent.
-
-   * Valid In Asynchronous Callback: NO
-
-   Notes
-   Calling this function with a dsize of zero will result in
-   a zero length packet transmitted to the USB host.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint parameter is
-   *	invalid
-
-   See Also
-   * CyAsUsbReadData
-   * CyAsUsbReadDataAsync
-   * CyAsUsbWriteDataAsync
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_write_data(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint to write data to */
-	cy_as_end_point_number_t		ep,
-	/* The size of the data to write */
-	uint32_t			dsize,
-	/* The data buffer */
-	void *data
-	);
-
-/* Summary
-   This function writes data to a USB endpoint
-
-   Description
-   This function writes data to an IN endpoint data buffer.
-   This function returns immediately and when the write
-   completes, or if an error occurs, the callback function
-   is called to indicate  completion of the write operation.
-
-   * Valid In Asynchronous Callback: YES
-
-   Notes
-   Calling this function with a dsize of zero will result
-   in a zero length packet transmitted to the USB host.
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint parameter is
-   *	invalid
-
-   See Also
-   * CyAsUsbReadData
-   * CyAsUsbReadDataAsync
-   * CyAsUsbWriteData
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_write_data_async(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint to write data to */
-	cy_as_end_point_number_t ep,
-	/* The size of the data */
-	uint32_t dsize,
-	/* The buffer containing the data */
-	void *data,
-	/* If true, send a short packet to terminate data */
-	cy_bool	spacket,
-	/* The callback to call when the data is written */
-	cy_as_usb_io_callback		callback
-	);
-
-/* Summary
-   This function aborts an outstanding asynchronous
-   operation on a given endpoint
-
-   Description
-   This function aborts any outstanding operation that is
-   pending on the given endpoint.
-
-   * Valid In Asynchronous Callback: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down
-   *	successfully
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not
-   *	running
-   * CY_AS_ERROR_ASYNC_NOT_PENDING - no asynchronous USB
-   *	operation was pending
-
-   See Also
-   * CyAsUsbReadData
-   * CyAsUsbReadDataAsync
-   * CyAsUsbWriteData
-   * CyAsUsbWriteDataAsync
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_cancel_async(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t		ep
-	);
-
-/* Summary
-   This function sets a stall condition on a given endpoint
-
-   Description
-   This function sets a stall condition on the given endpoint.
-   If the callback function is not zero, the function is
-   executed asynchronously and the callback is called when
-   the function is completed.  If the callback function is
-   zero, this function executes synchronously and will not
-   return until the function has completed.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the function succeeded
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint given was invalid,
-   *	or was not configured as an OUT endpoint
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_INVALID_IN_CALLBACK (only if no cb supplied)
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-   See Also
-   * CyAsUsbGetStall
-   * CyAsUsbClearStall
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_set_stall(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t		ep,
-	/* The callback if async call */
-	cy_as_function_callback		cb,
-	/* Client supplied data */
-	uint32_t			client
-);
-
-/* Summary
-   This function clears a stall condition on a given endpoint
-
-   Description
-   This function clears a stall condition on the given endpoint.
-   If the callback function is not zero, the function is
-   executed asynchronously and the callback is called when the
-   function is completed.  If the callback function is zero, this
-   function executes synchronously and will not return until the
-   function has completed.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the function succeeded
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint given was invalid,
-   *	or was not configured as an OUT endpoint
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_INVALID_IN_CALLBACK (only if no cb supplied)
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-   See Also
-   * CyAsUsbGetStall
-   * CyAsUsbSetStall
-*/
-
-EXTERN cy_as_return_status_t
-cy_as_usb_clear_stall(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t		ep,
-	/* The callback if async call */
-	cy_as_function_callback		cb,
-	/* Client supplied data */
-	uint32_t				client
-	);
-
-
-/* Summary
-   This function returns the stall status for a given endpoint
-
-   Description
-   This function returns the stall status for a given endpoint
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the function succeeded
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint given was invalid,
-   *	or was not configured as an OUT endpoint
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_INVALID_IN_CALLBACK
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-   See Also
-   * CyAsUsbGetStall
-   * CyAsUsbSetStall
-   * CyAsUsbClearStall
-*/
-
-EXTERN cy_as_return_status_t
-cy_as_usb_get_stall(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t		ep,
-	/* The return value for the stall state */
-	cy_bool *stall_p,
-	/* The callback if async call */
-	cy_as_function_callback		cb,
-	/* Client supplied data */
-	uint32_t client
-	);
-
-/* Summary
-   This function sets a NAK condition on a given endpoint
-
-   Description
-   This function sets a NAK condition on the given endpoint.
-   If the callback function is not zero, the function is
-   executed asynchronously and the callback is called when
-   the function is completed.  If the callback function is
-   zero, this function executes synchronously and will not
-   return until the function has completed.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the function succeeded
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint given was
-   *	invalid, or was not configured as an OUT endpoint
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_INVALID_IN_CALLBACK (only if no cb supplied)
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-   See Also
-   * CyAsUsbGetNak
-   * CyAsUsbClearNak
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_set_nak(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t		ep,
-	/* The callback if async call */
-	cy_as_function_callback		cb,
-	/* Client supplied data */
-	uint32_t			client
-);
-
-/* Summary
-   This function clears a NAK condition on a given endpoint
-
-   Description
-   This function clears a NAK condition on the given endpoint.
-   If the callback function is not zero, the function is
-   executed asynchronously and the callback is called when the
-   function is completed.  If the callback function is zero,
-   this function executes synchronously and will not return
-   until the function has completed.
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the function succeeded
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint given was invalid,
-   *	or was not configured as an OUT endpoint
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_INVALID_IN_CALLBACK (only if no cb supplied)
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-   See Also
-   * CyAsUsbGetNak
-   * CyAsUsbSetNak
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_clear_nak(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t	ep,
-	/* The callback if async call */
-	cy_as_function_callback	cb,
-	/* Client supplied data */
-	uint32_t client
-	);
-
-/* Summary
-   This function returns the NAK status for a given endpoint
-
-   Description
-   This function returns the NAK status for a given endpoint
-
-   * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the function succeeded
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint given was invalid,
-   *	or was not configured as an OUT endpoint
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_INVALID_IN_CALLBACK
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-
-   See Also
-   * CyAsUsbSetNak
-   * CyAsUsbClearNak
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_get_nak(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle			handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t		ep,
-	/* The return value for the stall state */
-	cy_bool *nak_p,
-	/* The callback if async call */
-	cy_as_function_callback		cb,
-	/* Client supplied data */
-	uint32_t					client
-);
-
-/* Summary
-   This function triggers a USB remote wakeup from the Processor
-   API
-
-   Description
-   When there is a Suspend condition on the USB bus, this function
-   programmatically takes the USB bus out of thi suspend state.
-
-  * Valid In Asynchronous Callback: YES (if cb supplied)
-   * Nestable: YES
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the function succeeded
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_INVALID_HANDLE
-   * CY_AS_ERROR_INVALID_IN_CALLBACK
-   * CY_AS_ERROR_OUT_OF_MEMORY
-   * CY_AS_ERROR_INVALID_RESPONSE
-   * CY_AS_ERROR_NOT_IN_SUSPEND
-
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_signal_remote_wakeup(
-	 /* Handle to the West Bridge device */
-	cy_as_device_handle			handle,
-	/* The callback if async call */
-	cy_as_function_callback		cb,
-	/* Client supplied data */
-	uint32_t					client
-	);
-
-/* Summary
-   This function sets the threshold levels for mass storage progress
-   reports from the West Bridge.
-
-   Description
-   The West Bridge firmware can be configured to track the amount of
-   read/write activity on the mass storage device, and send progress
-   reports when the activity level has crossed a threshold level.
-   This function sets the threshold levels for the progress reports.
-   Set wr_sectors and rd_sectors to 0, if the progress reports are to
-   be turned off.
-
-   * Valid In Asynchronous Callback: Yes (if cb supplied)
-   * Nestable: Yes
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - the function succeeded
-   * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
-   * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
-   *	the West Bridge device
-   * CY_AS_ERROR_INVALID_HANDLE - Bad handle
-   * CY_AS_ERROR_INVALID_IN_CALLBACK - Synchronous call made
-   *	while in callback
-   * CY_AS_ERROR_OUT_OF_MEMORY - Failed allocating memory for
-   *	request processing
-   * CY_AS_ERROR_NOT_SUPPORTED - Firmware version does not support
-   *	mass storage progress tracking
-   * CY_AS_ERROR_INVALID_RESPONSE - Unexpected response from
-   *	Firmware
-
-   See Also
-   * CyAsUsbMSCProgressData
-   * CyAsEventUsbMSCProgress
-*/
-EXTERN cy_as_return_status_t
-cy_as_usb_set_m_s_report_threshold(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle handle,
-	/* Number of sectors written before report is sent */
-	uint32_t wr_sectors,
-	/* Number of sectors read before report is sent */
-	uint32_t rd_sectors,
-	/* The callback if async call */
-	cy_as_function_callback		cb,
-	/* Client supplied data */
-	uint32_t					client
-	);
-
-/* Summary
-   Specify which of the partitions on a partitioned mass storage
-   device should be made visible to USB.
-
-   Description
-   West Bridge firmware supports the creation of up to two
-   partitions on mass storage devices connected to the West Bridge
-   device.  When there are two partitions on a device, the user can
-   choose which of these partitions should be made visible to the
-   USB host through the USB mass storage interface.  This function
-   allows the user to configure the partitions that should be
-   enumerated.  At least one partition should be selected through
-   this API.  If neither partition needs to be enumerated, use
-   CyAsUsbSetEnumConfig to control this.
-
-   * Valid in Asynchronous callback: Yes (if cb supplied)
-   * Nestable: Yes
-
-   Returns
-   * CY_AS_ERROR_SUCCESS - operation completed successfully
-   * CY_AS_ERROR_INVALID_HANDLE - invalid handle to the West
-   *	Bridge device
-   * CY_AS_ERROR_NOT_CONFIGURED - West Bridge device has not
-   *	been configured
-   * CY_AS_ERROR_NO_FIRMWARE - no firmware running on West
-   *	Bridge device
-   * CY_AS_ERROR_NOT_RUNNING - USB stack has not been started
-   * CY_AS_ERROR_IN_SUSPEND - West Bridge device is in
-   *	suspend mode
-   * CY_AS_ERROR_INVALID_CALL_SEQUENCE - this API has to be
-   *	called before CyAsUsbSetEnumConfig
-   * CY_AS_ERROR_OUT_OF_MEMORY - failed to get memory to
-   *	process the request
-   * CY_AS_ERROR_NO_SUCH_UNIT - Storage device addressed has
-   *	not been partitioned
-   * CY_AS_ERROR_NOT_SUPPORTED - operation is not supported by
-   *	active device/firmware.
-
-   See Also
-   * CyAsStorageCreatePPartition
-   * CyAsStorageRemovePPartition
-   * CyAsUsbMsType_t
- */
-EXTERN cy_as_return_status_t
-cy_as_usb_select_m_s_partitions(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	handle,
-	/* Bus index of the device being addressed */
-	cy_as_bus_number_t bus,
-	/* Device id of the device being addressed */
-	uint32_t device,
-	/* Selection of partitions to be enumerated */
-	cy_as_usb_m_s_type_t type,
-	/* The callback, if async call */
-	cy_as_function_callback	cb,
-	/* Client supplied data */
-	uint32_t client
-	);
-
-extern cy_as_media_type
-cy_as_storage_get_media_from_address(uint16_t v);
-
-extern cy_as_bus_number_t
-cy_as_storage_get_bus_from_address(uint16_t v);
-
-extern uint32_t
-cy_as_storage_get_device_from_address(uint16_t v);
-
-/* For supporting deprecated functions */
-#include "cyasusb_dep.h"
-
-#include "cyas_cplus_end.h"
-
-#endif				/* _INCLUDED_CYASUSB_H_ */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb_dep.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb_dep.h
deleted file mode 100644
index 829eddee39b5..000000000000
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb_dep.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/* Cypress West Bridge API header file (cyasusb_dep.h)
-## ===========================
-## Copyright (C) 2010  Cypress Semiconductor
-##
-## This program is free software; you can redistribute it and/or
-## modify it under the terms of the GNU General Public License
-## as published by the Free Software Foundation; either version 2
-## of the License, or (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin Street
-## Fifth Floor, Boston, MA  02110-1301, USA.
-## ===========================
-*/
-
-/*
- * This header will contain Antioch specific declaration
- * of the APIs that are deprecated in Astoria SDK. This is
- * for maintaining backward compatibility.
- */
-
-#ifndef __INCLUDED_CYASUSB_DEP_H__
-#define __INCLUDED_CYASUSB_DEP_H__
-
-#ifndef __doxygen__
-
-/*
-   This data structure is the data passed via the evdata
-   paramater on a usb event callback for the inquiry request.
-*/
-
-typedef struct cy_as_usb_inquiry_data_dep {
-	/* The media for the event */
-	cy_as_media_type media;
-	/* The EVPD bit from the SCSI INQUIRY request */
-	uint8_t evpd;
-	/* The codepage in the inquiry request */
-	uint8_t codepage;
-	/* This bool must be set to CyTrue indicate
-	 * that the inquiry data was changed */
-	cy_bool updated;
-	/* The length of the data */
-	uint16_t length;
-	/* The inquiry data */
-	void *data;
-} cy_as_usb_inquiry_data_dep;
-
-
-typedef struct cy_as_usb_unknown_command_data_dep {
-	/* The media for the event */
-	cy_as_media_type media;
-	/* The length of the requst (should be 16 bytes) */
-	uint16_t reqlen;
-	/* The request */
-	void *request;
-	/* The returned status value for the command */
-	uint8_t status;
-	/* If status is failed, the sense key */
-	uint8_t key;
-	/* If status is failed, the additional sense code */
-	uint8_t asc;
-	/* If status if failed, the additional sense code qualifier */
-	uint8_t ascq;
-} cy_as_usb_unknown_command_data_dep;
-
-
-typedef struct cy_as_usb_start_stop_data_dep {
-	/* The media type for the event */
-	cy_as_media_type media;
-	/* CyTrue means start request, CyFalse means stop request */
-	cy_bool start;
-	/* CyTrue means LoEj bit set, otherwise false */
-	cy_bool loej;
-} cy_as_usb_start_stop_data_dep;
-
-
-typedef struct cy_as_usb_enum_control_dep {
-	/* The bits in this member determine which mass storage devices
-	are enumerated.  see cy_as_usb_mass_storage_enum for more details. */
-	uint8_t enum_mass_storage;
-	/* If true, West Bridge will control enumeration.  If this is false the
-	pport controls enumeration.  if the P port is controlling
-	enumeration, traffic will be received via endpoint zero. */
-	cy_bool antioch_enumeration;
-	/* This is the interface # to use for the mass storage interface,
-	if mass storage is enumerated.  if mass storage is not enumerated
-	this value should be zero. */
-	uint8_t mass_storage_interface;
-	/* If true, Inquiry, START/STOP, and unknown mass storage
-	requests cause a callback to occur for handling by the
-	baseband processor. */
-	cy_bool mass_storage_callbacks;
-} cy_as_usb_enum_control_dep;
-
-
-typedef void (*cy_as_usb_event_callback_dep)(
-	/* Handle to the device to configure */
-	cy_as_device_handle			handle,
-	/* The event type being reported */
-	cy_as_usb_event			ev,
-	/* The data assocaited with the event being reported */
-	void *evdata
-);
-
-
-
-/* Register Callback api */
-EXTERN cy_as_return_status_t
-cy_as_usb_register_callback_dep(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle				handle,
-	/* The function to call */
-	cy_as_usb_event_callback_dep		callback
-	);
-
-
-extern cy_as_return_status_t
-cy_as_usb_set_enum_config_dep(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle			handle,
-	/* The USB configuration information */
-	cy_as_usb_enum_control_dep *config_p,
-	/* The callback if async call */
-	cy_as_function_callback		cb,
-	/* Client supplied data */
-	uint32_t client
-	);
-
-
-extern cy_as_return_status_t
-cy_as_usb_get_enum_config_dep(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle			handle,
-	/* The return value for USB congifuration information */
-	cy_as_usb_enum_control_dep *config_p,
-	/* The callback if async call */
-	cy_as_function_callback		cb,
-	/* Client supplied data */
-	uint32_t					client
-	);
-
-extern cy_as_return_status_t
-cy_as_usb_get_descriptor_dep(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle	handle,
-	/* The type of descriptor */
-	cy_as_usb_desc_type		type,
-	/* Index for string descriptor */
-	uint8_t				index,
-	/* The buffer to hold the returned descriptor */
-	void *desc_p,
-	/* This is an input and output parameter.  Before the code this pointer
-	points to a uint32_t that contains the length of the buffer.  after
-	the call, this value contains the amount of data actually returned. */
-	uint32_t *length_p
-	);
-
-extern cy_as_return_status_t
-cy_as_usb_set_stall_dep(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t		ep,
-	/* The callback if async call */
-	cy_as_usb_function_callback		cb,
-	/* Client supplied data */
-	uint32_t			client
-);
-
-EXTERN cy_as_return_status_t
-cy_as_usb_clear_stall_dep(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t		ep,
-	/* The callback if async call */
-	cy_as_usb_function_callback		cb,
-	/* Client supplied data */
-	uint32_t			client
-	);
-
-EXTERN cy_as_return_status_t
-cy_as_usb_set_nak_dep(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t		ep,
-	/* The callback if async call */
-	cy_as_usb_function_callback		cb,
-	/* Client supplied data */
-	uint32_t			client
-);
-
-EXTERN cy_as_return_status_t
-cy_as_usb_clear_nak_dep(
-	/* Handle to the West Bridge device */
-	cy_as_device_handle		handle,
-	/* The endpoint of interest */
-	cy_as_end_point_number_t		ep,
-	/* The callback if async call */
-	cy_as_usb_function_callback		cb,
-	/* Client supplied data */
-	uint32_t			client
-	);
-
-EXTERN cy_as_return_status_t
-cy_as_usb_select_m_s_partitions_dep(
-		cy_as_device_handle	handle,
-		cy_as_media_type	media,
-		uint32_t device,
-		cy_as_usb_m_s_type_t type,
-		cy_as_function_callback	 cb,
-		uint32_t client
-		);
-
-#endif /*__doxygen*/
-
-#endif /*__INCLUDED_CYANSTORAGE_DEP_H__*/