summaryrefslogtreecommitdiffstats
path: root/include/asm-arm/arch-omap/hardware.h
diff options
context:
space:
mode:
authorTony Lindgren <tony@atomide.com>2005-09-07 18:20:27 +0200
committerRussell King <rmk+kernel@arm.linux.org.uk>2005-09-07 18:20:27 +0200
commit9839c6b8dd414612be0b6a70c4aa06eaca5b7652 (patch)
tree06d766c7c0c2b765efde677c8d538c010713d325 /include/asm-arm/arch-omap/hardware.h
parent[ARM] 2887/1: OMAP 2/4: Update files common to omap1 and omap2, take 2 (diff)
downloadlinux-9839c6b8dd414612be0b6a70c4aa06eaca5b7652.tar.xz
linux-9839c6b8dd414612be0b6a70c4aa06eaca5b7652.zip
[ARM] 2888/1: OMAP 3/4: Update omap include files, take 2
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Start adding 24xx support by Paul Mundt - Clean-up of cpu detection by Dirk Behme and Tony Lindgren - Add DSP header by Toshihiro Kobayashi - Add support for mtd-xip by Vladimir Barinov - Add various new mux registers - Move OMAP specific serial defines back to serial.h Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'include/asm-arm/arch-omap/hardware.h')
-rw-r--r--include/asm-arm/arch-omap/hardware.h39
1 files changed, 17 insertions, 22 deletions
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index 48258c7f6541..60201e1dd6ad 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -43,6 +43,7 @@
#include <asm/arch/cpu.h>
#endif
#include <asm/arch/io.h>
+#include <asm/arch/serial.h>
/*
* ---------------------------------------------------------------------------
@@ -89,11 +90,12 @@
/* DPLL control registers */
#define DPLL_CTL (0xfffecf00)
-/* DSP clock control */
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
#define DSP_CONFIG_REG_BASE (0xe1008000)
#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14)
/*
* ---------------------------------------------------------------------------
@@ -142,6 +144,13 @@
* Interrupts
* ---------------------------------------------------------------------------
*/
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
#define OMAP_IH1_BASE 0xfffecb00
#define OMAP_IH2_BASE 0xfffe0000
@@ -170,6 +179,8 @@
#define IRQ_ILR0_REG_OFFSET 0x1c
#define IRQ_GMR_REG_OFFSET 0xa0
+#endif
+
/*
* ----------------------------------------------------------------------------
* System control registers
@@ -260,32 +271,17 @@
/*
* ---------------------------------------------------------------------------
- * Serial ports
- * ---------------------------------------------------------------------------
- */
-#define OMAP_UART1_BASE (unsigned char *)0xfffb0000
-#define OMAP_UART2_BASE (unsigned char *)0xfffb0800
-#define OMAP_UART3_BASE (unsigned char *)0xfffb9800
-#define OMAP_MAX_NR_PORTS 3
-#define OMAP1510_BASE_BAUD (12000000/16)
-#define OMAP16XX_BASE_BAUD (48000000/16)
-
-#define is_omap_port(p) ({int __ret = 0; \
- if (p == IO_ADDRESS(OMAP_UART1_BASE) || \
- p == IO_ADDRESS(OMAP_UART2_BASE) || \
- p == IO_ADDRESS(OMAP_UART3_BASE)) \
- __ret = 1; \
- __ret; \
- })
-
-/*
- * ---------------------------------------------------------------------------
* Processor specific defines
* ---------------------------------------------------------------------------
*/
#include "omap730.h"
#include "omap1510.h"
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#include "omap24xx.h"
+#endif
+
#include "omap16xx.h"
/*
@@ -312,7 +308,6 @@
#ifdef CONFIG_MACH_OMAP_H4
#include "board-h4.h"
-#error "Support for H4 board not yet implemented."
#endif
#ifdef CONFIG_MACH_OMAP_OSK