Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 264 insertions, 0 deletions

diff --git a/include/asm-arm/hardware/amba_clcd.h b/include/asm-arm/hardware/amba_clcd.h
new file mode 100644
index 000000000000..2149be7c7023
--- /dev/null
+++ b/include/asm-arm/hardware/amba_clcd.h
@@ -0,0 +1,264 @@
+/*
+ * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
+ *
+ * David A Rusling
+ *
+ * Copyright (C) 2001 ARM Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+#include <linux/config.h>
+#include <linux/fb.h>
+
+/*
+ * CLCD Controller Internal Register addresses
+ */
+#define CLCD_TIM0		0x00000000
+#define CLCD_TIM1 		0x00000004
+#define CLCD_TIM2 		0x00000008
+#define CLCD_TIM3 		0x0000000c
+#define CLCD_UBAS 		0x00000010
+#define CLCD_LBAS 		0x00000014
+
+#ifndef CONFIG_ARCH_VERSATILE
+#define CLCD_IENB 		0x00000018
+#define CLCD_CNTL 		0x0000001c
+#else
+/*
+ * Someone rearranged these two registers on the Versatile
+ * platform...
+ */
+#define CLCD_IENB 		0x0000001c
+#define CLCD_CNTL 		0x00000018
+#endif
+
+#define CLCD_STAT 		0x00000020
+#define CLCD_INTR 		0x00000024
+#define CLCD_UCUR 		0x00000028
+#define CLCD_LCUR 		0x0000002C
+#define CLCD_PALL 		0x00000200
+#define CLCD_PALETTE		0x00000200
+
+#define TIM2_CLKSEL		(1 << 5)
+#define TIM2_IVS		(1 << 11)
+#define TIM2_IHS		(1 << 12)
+#define TIM2_IPC		(1 << 13)
+#define TIM2_IOE		(1 << 14)
+#define TIM2_BCD		(1 << 26)
+
+#define CNTL_LCDEN		(1 << 0)
+#define CNTL_LCDBPP1		(0 << 1)
+#define CNTL_LCDBPP2		(1 << 1)
+#define CNTL_LCDBPP4		(2 << 1)
+#define CNTL_LCDBPP8		(3 << 1)
+#define CNTL_LCDBPP16		(4 << 1)
+#define CNTL_LCDBPP24		(5 << 1)
+#define CNTL_LCDBW		(1 << 4)
+#define CNTL_LCDTFT		(1 << 5)
+#define CNTL_LCDMONO8		(1 << 6)
+#define CNTL_LCDDUAL		(1 << 7)
+#define CNTL_BGR		(1 << 8)
+#define CNTL_BEBO		(1 << 9)
+#define CNTL_BEPO		(1 << 10)
+#define CNTL_LCDPWR		(1 << 11)
+#define CNTL_LCDVCOMP(x)	((x) << 12)
+#define CNTL_LDMAFIFOTIME	(1 << 15)
+#define CNTL_WATERMARK		(1 << 16)
+
+struct clcd_panel {
+	struct fb_videomode	mode;
+	signed short		width;	/* width in mm */
+	signed short		height;	/* height in mm */
+	u32			tim2;
+	u32			tim3;
+	u32			cntl;
+	unsigned int		bpp:8,
+				fixedtimings:1,
+				grayscale:1;
+	unsigned int		connector;
+};
+
+struct clcd_regs {
+	u32			tim0;
+	u32			tim1;
+	u32			tim2;
+	u32			tim3;
+	u32			cntl;
+	unsigned long		pixclock;
+};
+
+struct clcd_fb;
+
+/*
+ * the board-type specific routines
+ */
+struct clcd_board {
+	const char *name;
+
+	/*
+	 * Optional.  Check whether the var structure is acceptable
+	 * for this display.
+	 */
+	int	(*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
+
+	/*
+	 * Compulsary.  Decode fb->fb.var into regs->*.  In the case of
+	 * fixed timing, set regs->* to the register values required.
+	 */
+	void	(*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
+
+	/*
+	 * Optional.  Disable any extra display hardware.
+	 */
+	void	(*disable)(struct clcd_fb *);
+
+	/*
+	 * Optional.  Enable any extra display hardware.
+	 */
+	void	(*enable)(struct clcd_fb *);
+
+	/*
+	 * Setup platform specific parts of CLCD driver
+	 */
+	int	(*setup)(struct clcd_fb *);
+
+	/*
+	 * mmap the framebuffer memory
+	 */
+	int	(*mmap)(struct clcd_fb *, struct vm_area_struct *);
+
+	/*
+	 * Remove platform specific parts of CLCD driver
+	 */
+	void	(*remove)(struct clcd_fb *);
+};
+
+struct amba_device;
+struct clk;
+
+/* this data structure describes each frame buffer device we find */
+struct clcd_fb {
+	struct fb_info		fb;
+	struct amba_device	*dev;
+	struct clk		*clk;
+	struct clcd_panel	*panel;
+	struct clcd_board	*board;
+	void			*board_data;
+	void __iomem		*regs;
+	u32			clcd_cntl;
+	u32			cmap[16];
+};
+
+static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
+{
+	u32 val;
+
+	/*
+	 * Program the CLCD controller registers and start the CLCD
+	 */
+	val = ((fb->fb.var.xres / 16) - 1) << 2;
+	val |= (fb->fb.var.hsync_len - 1) << 8;
+	val |= (fb->fb.var.right_margin - 1) << 16;
+	val |= (fb->fb.var.left_margin - 1) << 24;
+	regs->tim0 = val;
+
+	val = fb->fb.var.yres - 1;
+	val |= (fb->fb.var.vsync_len - 1) << 10;
+	val |= fb->fb.var.lower_margin << 16;
+	val |= fb->fb.var.upper_margin << 24;
+	regs->tim1 = val;
+
+	val = fb->panel->tim2;
+	val |= fb->fb.var.sync & FB_SYNC_HOR_HIGH_ACT  ? 0 : TIM2_IHS;
+	val |= fb->fb.var.sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
+
+	if (fb->panel->cntl & CNTL_LCDTFT)
+		val |= (fb->fb.var.xres_virtual - 1) << 16;
+	else if (fb->panel->cntl & CNTL_LCDBW)
+		printk("what value for CPL for stnmono panels?");
+	else
+		val |= ((fb->fb.var.xres_virtual * 8 / 3) - 1) << 16;
+	regs->tim2 = val;
+
+	regs->tim3 = fb->panel->tim3;
+
+	val = fb->panel->cntl;
+	if (fb->fb.var.grayscale)
+		val |= CNTL_LCDBW;
+
+	switch (fb->fb.var.bits_per_pixel) {
+	case 1:
+		val |= CNTL_LCDBPP1;
+		break;
+	case 2:
+		val |= CNTL_LCDBPP2;
+		break;
+	case 4:
+		val |= CNTL_LCDBPP4;
+		break;
+	case 8:
+		val |= CNTL_LCDBPP8;
+		break;
+	case 16:
+		val |= CNTL_LCDBPP16;
+		break;
+	case 24:
+		val |= CNTL_LCDBPP24;
+		break;
+	}
+
+	regs->cntl = val;
+	regs->pixclock = fb->fb.var.pixclock;
+}
+
+static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
+{
+	var->xres_virtual = var->xres = (var->xres + 7) & ~7;
+	var->yres_virtual = var->yres;
+
+#define CHECK(e,l,h) (var->e < l || var->e > h)
+	if (CHECK(right_margin, (5+1), 256) ||	/* back porch */
+	    CHECK(left_margin, (5+1), 256) ||	/* front porch */
+	    CHECK(hsync_len, (5+1), 256) ||
+	    var->xres > 4096 ||
+	    var->lower_margin > 255 ||		/* back porch */
+	    var->upper_margin > 255 ||		/* front porch */
+	    var->vsync_len > 32 ||
+	    var->yres > 1024)
+		return -EINVAL;
+#undef CHECK
+
+	/* single panel mode: PCD = max(PCD, 1) */
+	/* dual panel mode: PCD = max(PCD, 5) */
+
+	/*
+	 * You can't change the grayscale setting, and
+	 * we can only do non-interlaced video.
+	 */
+	if (var->grayscale != fb->fb.var.grayscale ||
+	    (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
+		return -EINVAL;
+
+#define CHECK(e) (var->e != fb->fb.var.e)
+	if (fb->panel->fixedtimings &&
+	    (CHECK(xres)		||
+	     CHECK(yres)		||
+	     CHECK(bits_per_pixel)	||
+	     CHECK(pixclock)		||
+	     CHECK(left_margin)		||
+	     CHECK(right_margin)	||
+	     CHECK(upper_margin)	||
+	     CHECK(lower_margin)	||
+	     CHECK(hsync_len)		||
+	     CHECK(vsync_len)		||
+	     CHECK(sync)))
+		return -EINVAL;
+#undef CHECK
+
+	var->nonstd = 0;
+	var->accel_flags = 0;
+
+	return 0;
+}