Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 48 insertions, 0 deletions

diff --git a/include/asm-arm/hardware/linkup-l1110.h b/include/asm-arm/hardware/linkup-l1110.h
new file mode 100644
index 000000000000..7ec91168a576
--- /dev/null
+++ b/include/asm-arm/hardware/linkup-l1110.h
@@ -0,0 +1,48 @@
+/*
+*
+* Definitions for H3600 Handheld Computer
+*
+* Copyright 2001 Compaq Computer Corporation.
+*
+* Use consistent with the GNU GPL is permitted,
+* provided that this copyright notice is
+* preserved in its entirety in all copies and derived works.
+*
+* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+* FITNESS FOR ANY PARTICULAR PURPOSE.
+*
+* Author: Jamey Hicks.
+*
+*/
+
+/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */
+
+/* PC Card Status Register */
+#define LINKUP_PRS_S1	(1 << 0) /* voltage control bits S1-S4 */
+#define LINKUP_PRS_S2	(1 << 1)
+#define LINKUP_PRS_S3	(1 << 2)
+#define LINKUP_PRS_S4	(1 << 3)
+#define LINKUP_PRS_BVD1	(1 << 4)
+#define LINKUP_PRS_BVD2	(1 << 5)
+#define LINKUP_PRS_VS1	(1 << 6)
+#define LINKUP_PRS_VS2	(1 << 7)
+#define LINKUP_PRS_RDY	(1 << 8)
+#define LINKUP_PRS_CD1	(1 << 9)
+#define LINKUP_PRS_CD2	(1 << 10)
+
+/* PC Card Command Register */
+#define LINKUP_PRC_S1	(1 << 0)
+#define LINKUP_PRC_S2	(1 << 1)
+#define LINKUP_PRC_S3	(1 << 2)
+#define LINKUP_PRC_S4	(1 << 3)
+#define LINKUP_PRC_RESET (1 << 4)
+#define LINKUP_PRC_APOE	(1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */
+#define LINKUP_PRC_CFE	(1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */
+#define LINKUP_PRC_SOE	(1 << 7) /* signal output driver enable */
+#define LINKUP_PRC_SSP	(1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */
+#define LINKUP_PRC_MBZ	(1 << 15) /* must be zero */
+
+struct linkup_l1110 {
+	volatile short prc;
+};