Merge S3C24xx branch

9 files changed, 182 insertions, 29 deletions

diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S
index 5f8223e700d3..b7d15d125458 100644
--- a/include/asm-arm/arch-s3c2410/debug-macro.S
+++ b/include/asm-arm/arch-s3c2410/debug-macro.S
@@ -33,7 +33,7 @@
 		.endm
 
 		.macro	senduart,rd,rx
-		str	\rd, [\rx, # S3C2410_UTXH ]
+		strb 	\rd, [\rx, # S3C2410_UTXH ]
 		.endm
 
 		.macro	busyuart, rd, rx
@@ -42,6 +42,12 @@
 		beq	1001f				@
 		@ FIFO enabled...
 1003:
+		@ check for arm920 vs arm926. currently assume all arm926
+		@ devices have an 64 byte FIFO identical to the s3c2440
+		mrc	p15, 0, \rd, c0, c0
+		and	\rd, \rd, #0xff0
+		teq	\rd, #0x260
+		beq	1004f
 		mrc	p15, 0, \rd, c1, c0
 		tst	\rd, #1
 		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
@@ -50,7 +56,7 @@
 		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
 		and	\rd, \rd, #0x00ff0000
 		teq	\rd, #0x00440000		@ is it 2440?
-
+1004:
 		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
 		moveq	\rd, \rd, lsr #SHIFT_2440TXF
 		tst	\rd, #S3C2410_UFSTAT_TXFULL
diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S
index 894c35cf3b1e..e09a6b8ec153 100644
--- a/include/asm-arm/arch-s3c2410/entry-macro.S
+++ b/include/asm-arm/arch-s3c2410/entry-macro.S
@@ -18,8 +18,6 @@
 
 #define INTPND		(0x10)
 #define INTOFFSET	(0x14)
-#define EXTINTPEND	(0xa8)
-#define EXTINTMASK	(0xa4)
 
 #include <asm/hardware.h>
 #include <asm/arch/irqs.h>
@@ -28,37 +26,23 @@
 
 		mov	\base, #S3C24XX_VA_IRQ
 
-		ldr	\irqstat, [ \base, #INTPND]
-		bics	\irqnr, \irqstat, #3<<4		@@ only an GPIO IRQ
-		beq	2000f
-
 		@@ try the interrupt offset register, since it is there
 
+		ldr	\irqstat, [ \base, #INTPND ]
+		teq	\irqstat, #0
+		beq	1002f
 		ldr	\irqnr, [ \base, #INTOFFSET ]
 		mov	\tmp, #1
 		tst	\irqstat, \tmp, lsl \irqnr
-		addne	\irqnr, \irqnr, #IRQ_EINT0
 		bne	1001f
 
 		@@ the number specified is not a valid irq, so try
 		@@ and work it out for ourselves
 
-		mov	\irqnr, #IRQ_EINT0		@@ start here
-		b	3000f
-
-2000:
-		@@ load the GPIO interrupt register, and check it
-
-		add	\tmp, \base, #S3C24XX_VA_GPIO - S3C24XX_VA_IRQ
-		ldr	\irqstat, [ \tmp, # EXTINTPEND ]
-		ldr	\irqnr,   [ \tmp, # EXTINTMASK ]
-		bics	\irqstat, \irqstat, \irqnr
-		beq	1001f
-
-		mov	\irqnr, #(IRQ_EINT4 - 4)
+		mov	\irqnr, #0		@@ start here
 
 		@@ work out which irq (if any) we got
-3000:
+
 		movs	\tmp, \irqstat, lsl#16
 		addeq	\irqnr, \irqnr, #16
 		moveq	\irqstat, \irqstat, lsr#16
@@ -75,9 +59,9 @@
 		addeq	\irqnr, \irqnr, #1
 
 		@@ we have the value
-		movs	\irqnr, \irqnr
-
 1001:
+		adds	\irqnr, \irqnr, #IRQ_EINT0
+1002:
 		@@ exit here, Z flag unset if IRQ
 
 	.endm
diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h
index 5e4c8c37bc66..fae2766ff32b 100644
--- a/include/asm-arm/arch-s3c2410/map.h
+++ b/include/asm-arm/arch-s3c2410/map.h
@@ -236,4 +236,20 @@
 #define S3C24XX_PA_SPI      S3C2410_PA_SPI
 #endif
 
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
index 6c92faffe985..a7c61feb8433 100644
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ b/include/asm-arm/arch-s3c2410/regs-clock.h
@@ -1,6 +1,6 @@
 /* linux/include/asm/arch-s3c2410/regs-clock.h
  *
- * Copyright (c) 2003,2004,2005 Simtec Electronics <linux@simtec.co.uk>
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
  *		      http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
@@ -140,5 +140,66 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
 
 #endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
 
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+
+#define S3C2412_OSCSET		S3C2410_CLKREG(0x18)
+#define S3C2412_CLKSRC		S3C2410_CLKREG(0x1C)
+
+#define S3C2412_PLLCON_OFF		(1<<20)
+
+#define S3C2412_CLKDIVN_PDIVN		(1<<2)
+#define S3C2412_CLKDIVN_HDIVN_MASK	(3<<0)
+#define S3C2421_CLKDIVN_ARMDIVN		(1<<3)
+#define S3C2412_CLKDIVN_USB48DIV	(1<<6)
+#define S3C2412_CLKDIVN_UARTDIV_MASK	(15<<8)
+#define S3C2412_CLKDIVN_UARTDIV_SHIFT	(8)
+#define S3C2412_CLKDIVN_I2SDIV_MASK	(15<<12)
+#define S3C2412_CLKDIVN_I2SDIV_SHIFT	(12)
+#define S3C2412_CLKDIVN_CAMDIV_MASK	(15<<16)
+#define S3C2412_CLKDIVN_CAMDIV_SHIFT	(16)
+
+#define S3C2412_CLKCON_WDT		(1<<28)
+#define S3C2412_CLKCON_SPI		(1<<27)
+#define S3C2412_CLKCON_IIS		(1<<26)
+#define S3C2412_CLKCON_IIC		(1<<25)
+#define S3C2412_CLKCON_ADC		(1<<24)
+#define S3C2412_CLKCON_RTC		(1<<23)
+#define S3C2412_CLKCON_GPIO		(1<<22)
+#define S3C2412_CLKCON_UART2		(1<<21)
+#define S3C2412_CLKCON_UART1		(1<<20)
+#define S3C2412_CLKCON_UART0		(1<<19)
+#define S3C2412_CLKCON_SDI		(1<<18)
+#define S3C2412_CLKCON_PWMT		(1<<17)
+#define S3C2412_CLKCON_USBD		(1<<16)
+#define S3C2412_CLKCON_CAMCLK		(1<<15)
+#define S3C2412_CLKCON_UARTCLK		(1<<14)
+/* missing 13 */
+#define S3C2412_CLKCON_USB_HOST48	(1<<12)
+#define S3C2412_CLKCON_USB_DEV48	(1<<11)
+#define S3C2412_CLKCON_HCLKdiv2		(1<<10)
+#define S3C2412_CLKCON_HCLKx2		(1<<9)
+#define S3C2412_CLKCON_SDRAM		(1<<8)
+/* missing 7 */
+#define S3C2412_CLKCON_USBH		S3C2410_CLKCON_USBH
+#define S3C2412_CLKCON_LCDC		S3C2410_CLKCON_LCDC
+#define S3C2412_CLKCON_NAND		S3C2410_CLKCON_NAND
+#define S3C2412_CLKCON_DMA3		(1<<3)
+#define S3C2412_CLKCON_DMA2		(1<<2)
+#define S3C2412_CLKCON_DMA1		(1<<1)
+#define S3C2412_CLKCON_DMA0		(1<<0)
+
+/* clock sourec controls */
+
+#define S3C2412_CLKSRC_EXTCLKDIV_MASK		(7 << 0)
+#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT		(0)
+#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV	(1<<3)
+#define S3C2412_CLKSRC_MSYSCLK_MPLL		(1<<4)
+#define S3C2412_CLKSRC_USYSCLK_UPLL		(1<<5)
+#define S3C2412_CLKSRC_UARTCLK_MPLL		(1<<8)
+#define S3C2412_CLKSRC_I2SCLK_MPLL		(1<<9)
+#define S3C2412_CLKSRC_USBCLK_HCLK		(1<<10)
+#define S3C2412_CLKSRC_CAMCLK_HCLK		(1<<11)
+
+#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
 
 #endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h
index ba13a2c9e547..84aca61cbaa3 100644
--- a/include/asm-arm/arch-s3c2410/regs-dsc.h
+++ b/include/asm-arm/arch-s3c2410/regs-dsc.h
@@ -23,6 +23,9 @@
 #define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)
 #define S3C2440_DSC1	   S3C2410_GPIOREG(0xc8)
 
+#define S3C2412_DSC0	   S3C2410_GPIOREG(0xdc)
+#define S3C2412_DSC1	   S3C2410_GPIOREG(0xe0)
+
 #define S3C2440_SELECT_DSC0 (0)
 #define S3C2440_SELECT_DSC1 (1<<31)
 
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index 5f10334f06bf..6dd17f0f84e0 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -45,7 +45,7 @@
 #define S3C24XX_MISCCR        S3C2400_MISCCR
 #else
 #define S3C24XX_GPIO_BASE(x)  S3C2410_GPIO_BASE(x)
-#define S3C24XX_MISCCR        S3C2410_MISCCR
+#define S3C24XX_MISCCR	      S3C24XX_GPIOREG2(0x80)
 #endif /* CONFIG_CPU_S3C2400 */
 
 
@@ -73,9 +73,15 @@
 #define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* not available on A */
 #define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
 
-/* configure GPIO ports A..G */
+/* register address for the GPIO registers.
+ * S3C24XX_GPIOREG2 is for the second set of registers in the
+ * GPIO which move between s3c2410 and s3c2412 type systems */
 
 #define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
+
+
+/* configure GPIO ports A..G */
 
 /* port A - S3C2410: 22bits, zero in bit X makes pin X output
  *          S3C2400: 18bits, zero in bit X makes pin X output
@@ -953,11 +959,18 @@
 #define S3C2410_GPH10_OUTP    (0x01 << 20)
 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
 
+/* The S3C2412 and S3C2413 move the GPJ register set to after
+ * GPH, which means all registers after 0x80 are now offset by 0x10
+ * for the 2412/2413 from the 2410/2440/2442
+*/
+
 /* miscellaneous control */
 #define S3C2400_MISCCR	   S3C2410_GPIOREG(0x54)
 #define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
 #define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
 
+#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
+
 /* see clock.h for dclk definitions */
 
 /* pullup control on databus */
@@ -985,6 +998,8 @@
 #define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
 #define S3C2410_MISCCR_CLK0_MASK    (7<<4)
 
+#define S3C2412_MISCCR_CLK0_RTC	    (2<<4)
+
 #define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
 #define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
 #define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
@@ -993,6 +1008,8 @@
 #define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
 #define S3C2410_MISCCR_CLK1_MASK    (7<<8)
 
+#define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
+
 #define S3C2410_MISCCR_USBSUSPND0   (1<<12)
 #define S3C2410_MISCCR_USBSUSPND1   (1<<13)
 
@@ -1000,7 +1017,7 @@
 
 #define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
 #define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
-#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)
+#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
 #define S3C2410_MISCCR_SDSLEEP	    (7<<17)
 
 /* external interrupt control... */
@@ -1017,6 +1034,10 @@
 #define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
 #define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
 
+#define S3C24XX_EXTINT0	   S3C24XX_GPIOREG2(0x88)
+#define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
+#define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
+
 /* values for S3C2410_EXTINT0/1/2 */
 #define S3C2410_EXTINT_LOWLEV	 (0x00)
 #define S3C2410_EXTINT_HILEV	 (0x01)
@@ -1030,6 +1051,11 @@
 #define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
 #define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
 
+#define S3C24XX_EINFLT0	   S3C24XX_GPIOREG2(0x94)
+#define S3C24XX_EINFLT1	   S3C24XX_GPIOREG2(0x98)
+#define S3C24XX_EINFLT2	   S3C24XX_GPIOREG2(0x9C)
+#define S3C24XX_EINFLT3	   S3C24XX_GPIOREG2(0xA0)
+
 /* values for interrupt filtering */
 #define S3C2410_EINTFLT_PCLK		(0x00)
 #define S3C2410_EINTFLT_EXTCLK		(1<<7)
@@ -1039,6 +1065,7 @@
 
 /* GSTATUS have miscellaneous information in them
  *
+ * These move between s3c2410 and s3c2412 style systems.
  */
 
 #define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
@@ -1047,6 +1074,18 @@
 #define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
 #define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
 
+#define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
+#define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
+#define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
+#define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
+#define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
+
+#define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
+#define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
+#define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
+#define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
+#define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
+
 #define S3C2410_GSTATUS0_nWAIT	   (1<<3)
 #define S3C2410_GSTATUS0_NCON	   (1<<2)
 #define S3C2410_GSTATUS0_RnB	   (1<<1)
@@ -1054,6 +1093,7 @@
 
 #define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
 #define S3C2410_GSTATUS1_2410	   (0x32410000)
+#define S3C2410_GSTATUS1_2412	   (0x32412001)
 #define S3C2410_GSTATUS1_2440	   (0x32440000)
 #define S3C2410_GSTATUS1_2442	   (0x32440aaa)
 
@@ -1077,5 +1117,22 @@
 #define S3C2400_OPENCR_OPC_MOSIDIS  (0<<5)
 #define S3C2400_OPENCR_OPC_MOSIEN   (1<<5)
 
+/* 2412/2413 sleep configuration registers */
+
+#define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
+#define S3C2412_GPCSLPCON	S3C2410_GPIOREG(0x2C)
+#define S3C2412_GPDSLPCON	S3C2410_GPIOREG(0x3C)
+#define S3C2412_GPESLPCON	S3C2410_GPIOREG(0x4C)
+#define S3C2412_GPFSLPCON	S3C2410_GPIOREG(0x5C)
+#define S3C2412_GPGSLPCON	S3C2410_GPIOREG(0x6C)
+#define S3C2412_GPHSLPCON	S3C2410_GPIOREG(0x7C)
+
+/* definitions for each pin bit */
+#define S3C2412_SLPCON_LOW(x)	( 0x00 << ((x) * 2))
+#define S3C2412_SLPCON_HI(x)	( 0x01 << ((x) * 2))
+#define S3C2412_SLPCON_IN(x)	( 0x02 << ((x) * 2))
+#define S3C2412_SLPCON_PDWN(x)	( 0x03 << ((x) * 2))
+#define S3C2412_SLPCON_MASK(x)	( 0x03 << ((x) * 2))
+
 #endif	/* __ASM_ARCH_REGS_GPIO_H */
 
diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h
index 3ad2324acc39..18edae50d0b8 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpioj.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpioj.h
@@ -32,6 +32,11 @@
 #define S3C2440_GPJDAT	    S3C2410_GPIOREG(0xd4)
 #define S3C2440_GPJUP	    S3C2410_GPIOREG(0xd8)
 
+#define S3C2413_GPJCON		S3C2410_GPIOREG(0x80)
+#define S3C2413_GPJDAT		S3C2410_GPIOREG(0x84)
+#define S3C2413_GPJUP		S3C2410_GPIOREG(0x88)
+#define S3C2413_GPJSLPCON	S3C2410_GPIOREG(0x8C)
+
 #define S3C2440_GPJ0            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
 #define S3C2440_GPJ0_INP        (0x00 << 0)
 #define S3C2440_GPJ0_OUTP       (0x01 << 0)
diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h
index 24b7292df79e..572fca5d9acf 100644
--- a/include/asm-arm/arch-s3c2410/regs-irq.h
+++ b/include/asm-arm/arch-s3c2410/regs-irq.h
@@ -23,6 +23,7 @@
 
 #define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
 #define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_EINTREG(x)  ((x) + S3C24XX_VA_GPIO2)
 
 #define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
 #define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
@@ -40,5 +41,10 @@
 
 #define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
 #define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
+#define S3C2412_EINTMASK       S3C2410_EINTREG(0x0B4)
+#define S3C2412_EINTPEND       S3C2410_EINTREG(0X0B8)
+
+#define S3C24XX_EINTMASK       S3C24XX_EINTREG(0x0A4)
+#define S3C24XX_EINTPEND       S3C24XX_EINTREG(0X0A8)
 
 #endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h
index 83b01254c4ac..93f651ae2967 100644
--- a/include/asm-arm/arch-s3c2410/regs-serial.h
+++ b/include/asm-arm/arch-s3c2410/regs-serial.h
@@ -82,6 +82,12 @@
 #define S3C2440_UCON2_DIVMASK	  (7 << 12)
 #define S3C2440_UCON_DIVSHIFT	  (12)
 
+#define S3C2412_UCON_CLKMASK	(3<<10)
+#define S3C2412_UCON_UCLK	(1<<10)
+#define S3C2412_UCON_USYSCLK	(3<<10)
+#define S3C2412_UCON_PCLK	(0<<10)
+#define S3C2412_UCON_PCLK2	(2<<10)
+
 #define S3C2410_UCON_UCLK	  (1<<10)
 #define S3C2410_UCON_SBREAK	  (1<<4)
 
@@ -124,6 +130,15 @@
 #define	S3C2410_UMCOM_AFC	  (1<<4)
 #define	S3C2410_UMCOM_RTS_LOW	  (1<<0)
 
+#define S3C2412_UMCON_AFC_63	(0<<5)
+#define S3C2412_UMCON_AFC_56	(1<<5)
+#define S3C2412_UMCON_AFC_48	(2<<5)
+#define S3C2412_UMCON_AFC_40	(3<<5)
+#define S3C2412_UMCON_AFC_32	(4<<5)
+#define S3C2412_UMCON_AFC_24	(5<<5)
+#define S3C2412_UMCON_AFC_16	(6<<5)
+#define S3C2412_UMCON_AFC_8	(7<<5)
+
 #define S3C2410_UFSTAT_TXFULL	  (1<<9)
 #define S3C2410_UFSTAT_RXFULL	  (1<<8)
 #define S3C2410_UFSTAT_TXMASK	  (15<<4)