parisc: move include/asm-parisc to arch/parisc/include/asm

1 files changed, 0 insertions, 85 deletions

diff --git a/include/asm-parisc/superio.h b/include/asm-parisc/superio.h
deleted file mode 100644
index 6598acb4d46d..000000000000
--- a/include/asm-parisc/superio.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef _PARISC_SUPERIO_H
-#define _PARISC_SUPERIO_H
-
-#define IC_PIC1    0x20		/* PCI I/O address of master 8259 */
-#define IC_PIC2    0xA0		/* PCI I/O address of slave */
-
-/* Config Space Offsets to configuration and base address registers */
-#define SIO_CR     0x5A		/* Configuration Register */
-#define SIO_ACPIBAR 0x88	/* ACPI BAR */
-#define SIO_FDCBAR 0x90		/* Floppy Disk Controller BAR */
-#define SIO_SP1BAR 0x94		/* Serial 1 BAR */
-#define SIO_SP2BAR 0x98		/* Serial 2 BAR */
-#define SIO_PPBAR  0x9C		/* Parallel BAR */
-
-#define TRIGGER_1  0x67		/* Edge/level trigger register 1 */
-#define TRIGGER_2  0x68		/* Edge/level trigger register 2 */
-
-/* Interrupt Routing Control registers */
-#define CFG_IR_SER    0x69	/* Serial 1 [0:3] and Serial 2 [4:7] */
-#define CFG_IR_PFD    0x6a	/* Parallel [0:3] and Floppy [4:7] */
-#define CFG_IR_IDE    0x6b	/* IDE1     [0:3] and IDE2 [4:7] */
-#define CFG_IR_INTAB  0x6c	/* PCI INTA [0:3] and INT B [4:7] */
-#define CFG_IR_INTCD  0x6d	/* PCI INTC [0:3] and INT D [4:7] */
-#define CFG_IR_PS2    0x6e	/* PS/2 KBINT [0:3] and Mouse [4:7] */
-#define CFG_IR_FXBUS  0x6f	/* FXIRQ[0] [0:3] and FXIRQ[1] [4:7] */
-#define CFG_IR_USB    0x70	/* FXIRQ[2] [0:3] and USB [4:7] */
-#define CFG_IR_ACPI   0x71	/* ACPI SCI [0:3] and reserved [4:7] */
-
-#define CFG_IR_LOW     CFG_IR_SER	/* Lowest interrupt routing reg */
-#define CFG_IR_HIGH    CFG_IR_ACPI	/* Highest interrupt routing reg */
-
-/* 8259 operational control words */
-#define OCW2_EOI   0x20		/* Non-specific EOI */
-#define OCW2_SEOI  0x60		/* Specific EOI */
-#define OCW3_IIR   0x0A		/* Read request register */
-#define OCW3_ISR   0x0B		/* Read service register */
-#define OCW3_POLL  0x0C		/* Poll the PIC for an interrupt vector */
-
-/* Interrupt lines. Only PIC1 is used */
-#define USB_IRQ    1		/* USB */
-#define SP1_IRQ    3		/* Serial port 1 */
-#define SP2_IRQ    4		/* Serial port 2 */
-#define PAR_IRQ    5		/* Parallel port */
-#define FDC_IRQ    6		/* Floppy controller */
-#define IDE_IRQ    7		/* IDE (pri+sec) */
-
-/* ACPI registers */
-#define USB_REG_CR	0x1f	/* USB Regulator Control Register */
-
-#define SUPERIO_NIRQS   8
-
-struct superio_device {
-	u32 fdc_base;
-	u32 sp1_base;
-	u32 sp2_base;
-	u32 pp_base;
-	u32 acpi_base;
-	int suckyio_irq_enabled;
-	struct pci_dev *lio_pdev;       /* pci device for legacy IO (fn 1) */
-	struct pci_dev *usb_pdev;       /* pci device for USB (fn 2) */
-};
-
-/*
- * Does NS make a 87415 based plug in PCI card? If so, because of this
- * macro we currently don't support it being plugged into a machine
- * that contains a SuperIO chip AND has CONFIG_SUPERIO enabled.
- *
- * This could be fixed by checking to see if function 1 exists, and
- * if it is SuperIO Legacy IO; but really now, is this combination
- * going to EVER happen?
- */
-
-#define SUPERIO_IDE_FN 0 /* Function number of IDE controller */
-#define SUPERIO_LIO_FN 1 /* Function number of Legacy IO controller */
-#define SUPERIO_USB_FN 2 /* Function number of USB controller */
-
-#define is_superio_device(x) \
-	(((x)->vendor == PCI_VENDOR_ID_NS) && \
-	(  ((x)->device == PCI_DEVICE_ID_NS_87415) \
-	|| ((x)->device == PCI_DEVICE_ID_NS_87560_LIO) \
-	|| ((x)->device == PCI_DEVICE_ID_NS_87560_USB) ) )
-
-extern int superio_fixup_irq(struct pci_dev *pcidev); /* called by iosapic */
-
-#endif /* _PARISC_SUPERIO_H */