sh: Kill off the last of the sh64 headers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

7 files changed, 0 insertions, 513 deletions

diff --git a/include/asm-sh64/cayman.h b/include/asm-sh64/cayman.h
deleted file mode 100644
index 7b6b96844842..000000000000
--- a/include/asm-sh64/cayman.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/cayman.h
- *
- * Cayman definitions
- *
- * Global defintions for the SH5 Cayman board
- *
- * Copyright (C) 2002 Stuart Menefy
- */
-
-
-/* Setup for the SMSC FDC37C935 / LAN91C100FD */
-#define SMSC_IRQ         IRQ_IRL1
-
-/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
-#define PCI2_IRQ         IRQ_IRL3
diff --git a/include/asm-sh64/hardware.h b/include/asm-sh64/hardware.h
deleted file mode 100644
index 931c1ad80847..000000000000
--- a/include/asm-sh64/hardware.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __ASM_SH64_HARDWARE_H
-#define __ASM_SH64_HARDWARE_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/hardware.h
- *
- * Copyright (C) 2002 Stuart Menefy
- * Copyright (C) 2003 Paul Mundt
- *
- * Defitions of the locations of registers in the physical address space.
- */
-
-#define	PHYS_PERIPHERAL_BLOCK	0x09000000
-#define PHYS_DMAC_BLOCK		0x0e000000
-#define PHYS_PCI_BLOCK		0x60000000
-#define PHYS_EMI_BLOCK		0xff000000
-
-#endif /* __ASM_SH64_HARDWARE_H */
diff --git a/include/asm-sh64/irq.h b/include/asm-sh64/irq.h
deleted file mode 100644
index 5c9e6a873aeb..000000000000
--- a/include/asm-sh64/irq.h
+++ /dev/null
@@ -1,144 +0,0 @@
-#ifndef __ASM_SH64_IRQ_H
-#define __ASM_SH64_IRQ_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/irq.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- *
- */
-
-
-/*
- * Encoded IRQs are not considered worth to be supported.
- * Main reason is that there's no per-encoded-interrupt
- * enable/disable mechanism (as there was in SH3/4).
- * An all enabled/all disabled is worth only if there's
- * a cascaded IC to disable/enable/ack on. Until such
- * IC is available there's no such support.
- *
- * Presumably Encoded IRQs may use extra IRQs beyond 64,
- * below. Some logic must be added to cope with IRQ_IRL?
- * in an exclusive way.
- *
- * Priorities are set at Platform level, when IRQ_IRL0-3
- * are set to 0 Encoding is allowed. Otherwise it's not
- * allowed.
- */
-
-/* Independent IRQs */
-#define IRQ_IRL0	0
-#define IRQ_IRL1	1
-#define IRQ_IRL2	2
-#define IRQ_IRL3	3
-
-#define IRQ_INTA	4
-#define IRQ_INTB	5
-#define IRQ_INTC	6
-#define IRQ_INTD	7
-
-#define IRQ_SERR	12
-#define IRQ_ERR		13
-#define IRQ_PWR3	14
-#define IRQ_PWR2	15
-#define IRQ_PWR1	16
-#define IRQ_PWR0	17
-
-#define IRQ_DMTE0	18
-#define IRQ_DMTE1	19
-#define IRQ_DMTE2	20
-#define IRQ_DMTE3	21
-#define IRQ_DAERR	22
-
-#define IRQ_TUNI0	32
-#define IRQ_TUNI1	33
-#define IRQ_TUNI2	34
-#define IRQ_TICPI2	35
-
-#define IRQ_ATI		36
-#define IRQ_PRI		37
-#define IRQ_CUI		38
-
-#define IRQ_ERI		39
-#define IRQ_RXI		40
-#define IRQ_BRI		41
-#define IRQ_TXI		42
-
-#define IRQ_ITI		63
-
-#define NR_INTC_IRQS	64
-
-#ifdef CONFIG_SH_CAYMAN
-#define NR_EXT_IRQS     32
-#define START_EXT_IRQS  64
-
-/* PCI bus 2 uses encoded external interrupts on the Cayman board */
-#define IRQ_P2INTA      (START_EXT_IRQS + (3*8) + 0)
-#define IRQ_P2INTB      (START_EXT_IRQS + (3*8) + 1)
-#define IRQ_P2INTC      (START_EXT_IRQS + (3*8) + 2)
-#define IRQ_P2INTD      (START_EXT_IRQS + (3*8) + 3)
-
-#define I8042_KBD_IRQ	(START_EXT_IRQS + 2)
-#define I8042_AUX_IRQ	(START_EXT_IRQS + 6)
-
-#define IRQ_CFCARD	(START_EXT_IRQS + 7)
-#define IRQ_PCMCIA	(0)
-
-#else
-#define NR_EXT_IRQS	0
-#endif
-
-#define NR_IRQS		(NR_INTC_IRQS+NR_EXT_IRQS)
-
-
-/* Default IRQs, fixed */
-#define TIMER_IRQ	IRQ_TUNI0
-#define RTC_IRQ		IRQ_CUI
-
-/* Default Priorities, Platform may choose differently */
-#define	NO_PRIORITY	0	/* Disabled */
-#define TIMER_PRIORITY	2
-#define RTC_PRIORITY	TIMER_PRIORITY
-#define SCIF_PRIORITY	3
-#define INTD_PRIORITY	3
-#define	IRL3_PRIORITY	4
-#define INTC_PRIORITY	6
-#define	IRL2_PRIORITY	7
-#define INTB_PRIORITY	9
-#define	IRL1_PRIORITY	10
-#define INTA_PRIORITY	12
-#define	IRL0_PRIORITY	13
-#define TOP_PRIORITY	15
-
-extern int intc_evt_to_irq[(0xE20/0x20)+1];
-int intc_irq_describe(char* p, int irq);
-
-#define irq_canonicalize(irq)	(irq)
-
-#ifdef CONFIG_SH_CAYMAN
-int cayman_irq_demux(int evt);
-int cayman_irq_describe(char* p, int irq);
-#define irq_demux(x) cayman_irq_demux(x)
-#define irq_describe(p, x) cayman_irq_describe(p, x)
-#else
-#define irq_demux(x) (intc_evt_to_irq[x])
-#define irq_describe(p, x) intc_irq_describe(p, x)
-#endif
-
-/*
- * Function for "on chip support modules".
- */
-
-/*
- * SH-5 supports Priority based interrupts only.
- * Interrupt priorities are defined at platform level.
- */
-#define set_ipr_data(a, b, c, d)
-#define make_ipr_irq(a)
-#define make_imask_irq(a)
-
-#endif /* __ASM_SH64_IRQ_H */
diff --git a/include/asm-sh64/keyboard.h b/include/asm-sh64/keyboard.h
deleted file mode 100644
index 0b01c3beb2f8..000000000000
--- a/include/asm-sh64/keyboard.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- *  linux/include/asm-shmedia/keyboard.h
- *
- * Copied from i386 version:
- *    Created 3 Nov 1996 by Geert Uytterhoeven
- */
-
-/*
- *  This file contains the i386 architecture specific keyboard definitions
- */
-
-#ifndef __ASM_SH64_KEYBOARD_H
-#define __ASM_SH64_KEYBOARD_H
-
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_SH_CAYMAN
-#define KEYBOARD_IRQ			(START_EXT_IRQS + 2) /* SMSC SuperIO IRQ 1 */
-#endif
-#define DISABLE_KBD_DURING_INTERRUPTS	0
-
-extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
-extern int pckbd_getkeycode(unsigned int scancode);
-extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
-			   char raw_mode);
-extern char pckbd_unexpected_up(unsigned char keycode);
-extern void pckbd_leds(unsigned char leds);
-extern void pckbd_init_hw(void);
-
-#define kbd_setkeycode		pckbd_setkeycode
-#define kbd_getkeycode		pckbd_getkeycode
-#define kbd_translate		pckbd_translate
-#define kbd_unexpected_up	pckbd_unexpected_up
-#define kbd_leds		pckbd_leds
-#define kbd_init_hw		pckbd_init_hw
-
-/* resource allocation */
-#define kbd_request_region()
-#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \
-                                             "keyboard", NULL)
-
-/* How to access the keyboard macros on this platform.  */
-#define kbd_read_input() inb(KBD_DATA_REG)
-#define kbd_read_status() inb(KBD_STATUS_REG)
-#define kbd_write_output(val) outb(val, KBD_DATA_REG)
-#define kbd_write_command(val) outb(val, KBD_CNTL_REG)
-
-/* Some stoneage hardware needs delays after some operations.  */
-#define kbd_pause() do { } while(0)
-
-/*
- * Machine specific bits for the PS/2 driver
- */
-
-#ifdef CONFIG_SH_CAYMAN
-#define AUX_IRQ (START_EXT_IRQS + 6) /* SMSC SuperIO IRQ12 */
-#endif
-
-#define aux_request_irq(hand, dev_id)					\
-	request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id)
-
-#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH64_KEYBOARD_H */
-
diff --git a/include/asm-sh64/pci.h b/include/asm-sh64/pci.h
deleted file mode 100644
index 18055dbbb4b5..000000000000
--- a/include/asm-sh64/pci.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef __ASM_SH64_PCI_H
-#define __ASM_SH64_PCI_H
-
-#ifdef __KERNEL__
-
-#include <linux/dma-mapping.h>
-
-/* Can be used to override the logic in pci_scan_bus for skipping
-   already-configured bus numbers - to be used for buggy BIOSes
-   or architectures with incomplete PCI setup by the loader */
-
-#define pcibios_assign_all_busses()     1
-
-/*
- * These are currently the correct values for the STM overdrive board
- * We need some way of setting this on a board specific way, it will
- * not be the same on other boards I think
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
-#define PCIBIOS_MIN_IO          0x2000
-#define PCIBIOS_MIN_MEM         0x40000000
-#endif
-
-extern void pcibios_set_master(struct pci_dev *dev);
-
-/*
- * Set penalize isa irq function
- */
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
-/* Dynamic DMA mapping stuff.
- * SuperH has everything mapped statically like x86.
- */
-
-/* The PCI address space does equal the physical memory
- * address space.  The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS	(1)
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <asm/scatterlist.h>
-#include <linux/string.h>
-#include <asm/io.h>
-
-/* pci_unmap_{single,page} being a nop depends upon the
- * configuration.
- */
-#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-#else
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-#endif
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	*strat = PCI_DMA_BURST_INFINITY;
-	*strategy_parameter = ~0UL;
-}
-#endif
-
-/* Board-specific fixup routines. */
-extern void pcibios_fixup(void);
-extern void pcibios_fixup_irqs(void);
-
-#ifdef CONFIG_PCI_AUTO
-extern int pciauto_assign_resources(int busno, struct pci_channel *hose);
-#endif
-
-#endif /* __KERNEL__ */
-
-/* generic pci stuff */
-#include <asm-generic/pci.h>
-
-/* generic DMA-mapping stuff */
-#include <asm-generic/pci-dma-compat.h>
-
-#endif /* __ASM_SH64_PCI_H */
-
diff --git a/include/asm-sh64/platform.h b/include/asm-sh64/platform.h
deleted file mode 100644
index bd0d9c405a80..000000000000
--- a/include/asm-sh64/platform.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __ASM_SH64_PLATFORM_H
-#define __ASM_SH64_PLATFORM_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/platform.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- *
- * benedict.gaster@superh.com:	 3rd May 2002
- *    Added support for ramdisk, removing statically linked romfs at the same time.
- */
-
-#include <linux/ioport.h>
-#include <asm/irq.h>
-
-
-/*
- * Platform definition structure.
- */
-struct sh64_platform {
-	unsigned int readonly_rootfs;
-	unsigned int ramdisk_flags;
-	unsigned int initial_root_dev;
-	unsigned int loader_type;
-	unsigned int initrd_start;
-	unsigned int initrd_size;
-	unsigned int fpu_flags;
-	unsigned int io_res_count;
-	unsigned int kram_res_count;
-	unsigned int xram_res_count;
-	unsigned int rom_res_count;
-	struct resource *io_res_p;
-	struct resource *kram_res_p;
-	struct resource *xram_res_p;
-	struct resource *rom_res_p;
-};
-
-extern struct sh64_platform platform_parms;
-
-extern unsigned long long memory_start, memory_end;
-
-extern unsigned long long fpu_in_use;
-
-extern int platform_int_priority[NR_INTC_IRQS];
-
-#define FPU_FLAGS		(platform_parms.fpu_flags)
-#define STANDARD_IO_RESOURCES	(platform_parms.io_res_count)
-#define STANDARD_KRAM_RESOURCES	(platform_parms.kram_res_count)
-#define STANDARD_XRAM_RESOURCES	(platform_parms.xram_res_count)
-#define STANDARD_ROM_RESOURCES	(platform_parms.rom_res_count)
-
-/*
- * Kernel Memory description, Respectively:
- * code = last but one memory descriptor
- * data = last memory descriptor
- */
-#define code_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 2])
-#define data_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 1])
-
-#endif	/* __ASM_SH64_PLATFORM_H */
diff --git a/include/asm-sh64/thread_info.h b/include/asm-sh64/thread_info.h
deleted file mode 100644
index f6d5117c53af..000000000000
--- a/include/asm-sh64/thread_info.h
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifndef __ASM_SH64_THREAD_INFO_H
-#define __ASM_SH64_THREAD_INFO_H
-
-/*
- * SuperH 5 version
- * Copyright (C) 2003  Paul Mundt
- */
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-#include <asm/registers.h>
-
-/*
- * low level task data that entry.S needs immediate access to
- * - this struct should fit entirely inside of one cache line
- * - this struct shares the supervisor stack pages
- * - if the contents of this structure are changed, the assembly constants must also be changed
- */
-struct thread_info {
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	unsigned long		flags;		/* low level flags */
-	/* Put the 4 32-bit fields together to make asm offsetting easier. */
-	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
-	__u16			cpu;
-
-	mm_segment_t		addr_limit;
-	struct restart_block	restart_block;
-
-	__u8			supervisor_stack[0];
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.flags		= 0,			\
-	.cpu		= 0,			\
-	.preempt_count	= 1,			\
-	.addr_limit     = KERNEL_DS,            \
-	.restart_block	= {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	struct thread_info *ti;
-
-	__asm__ __volatile__ ("getcon " __KCR0 ", %0\n\t" : "=r" (ti));
-
-	return ti;
-}
-
-/* thread information allocation */
-
-
-
-#define alloc_thread_info(ti) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
-#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
-
-#endif /* __ASSEMBLY__ */
-
-#define THREAD_SIZE  8192
-
-#define PREEMPT_ACTIVE		0x10000000
-
-/* thread information flags */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		2	/* signal pending */
-#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
-#define TIF_MEMDIE		4
-#define TIF_RESTORE_SIGMASK	5	/* Restore signal mask in do_signal */
-
-#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_MEMDIE		(1 << TIF_MEMDIE)
-#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH64_THREAD_INFO_H */