remove the v850 port

Trying to compile the v850 port brings many compile errors, one of them exists
since at least kernel 2.6.19.

There also seems to be noone willing to bring this port back into a usable
state.

This patch therefore removes the v850 port.

If anyone ever decides to revive the v850 port the code will still be
available from older kernels, and it wouldn't be impossible for the port to
reenter the kernel if it would become actively maintained again.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 278 deletions

diff --git a/include/asm-v850/v850e_uarta.h b/include/asm-v850/v850e_uarta.h
deleted file mode 100644
index e483e0950725..000000000000
--- a/include/asm-v850/v850e_uarta.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * include/asm-v850/v850e_uarta.h -- original V850E on-chip UART
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This is the original V850E UART implementation is called just `UART' in
-   the docs, but we name this header file <asm/v850e_uarta.h> because the
-   name <asm/v850e_uart.h> is used for the common driver that handles both
-   `UART' and `UARTB' implementations.  */
-
-#ifndef __V850_V850E_UARTA_H__
-#define __V850_V850E_UARTA_H__
-
-
-/* Raw hardware interface.  */
-
-/* The base address of the UART control registers for channel N.
-   The default is the address used on the V850E/MA1.  */
-#ifndef V850E_UART_BASE_ADDR
-#define V850E_UART_BASE_ADDR(n)		(0xFFFFFA00 + 0x10 * (n))
-#endif 
-
-/* Addresses of specific UART control registers for channel N.
-   The defaults are the addresses used on the V850E/MA1; if a platform
-   wants to redefine any of these, it must redefine them all.  */
-#ifndef V850E_UART_ASIM_ADDR
-#define V850E_UART_ASIM_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x0)
-#define V850E_UART_RXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x2)
-#define V850E_UART_ASIS_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x3)
-#define V850E_UART_TXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x4)
-#define V850E_UART_ASIF_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x5)
-#define V850E_UART_CKSR_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x6)
-#define V850E_UART_BRGC_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x7)
-#endif
-
-/* UART config registers.  */
-#define V850E_UART_ASIM(n)	(*(volatile u8 *)V850E_UART_ASIM_ADDR(n))
-/* Control bits for config registers.  */
-#define V850E_UART_ASIM_CAE	0x80 /* clock enable */
-#define V850E_UART_ASIM_TXE	0x40 /* transmit enable */
-#define V850E_UART_ASIM_RXE	0x20 /* receive enable */
-#define V850E_UART_ASIM_PS_MASK	0x18 /* mask covering parity-select bits */
-#define V850E_UART_ASIM_PS_NONE	0x00 /* no parity */
-#define V850E_UART_ASIM_PS_ZERO	0x08 /* zero parity */
-#define V850E_UART_ASIM_PS_ODD	0x10 /* odd parity */
-#define V850E_UART_ASIM_PS_EVEN	0x18 /* even parity */
-#define V850E_UART_ASIM_CL_8	0x04 /* char len is 8 bits (otherwise, 7) */
-#define V850E_UART_ASIM_SL_2	0x02 /* 2 stop bits (otherwise, 1) */
-#define V850E_UART_ASIM_ISRM	0x01 /* generate INTSR interrupt on errors
-					(otherwise, generate INTSER) */
-
-/* UART serial interface status registers.  */
-#define V850E_UART_ASIS(n)	(*(volatile u8 *)V850E_UART_ASIS_ADDR(n))
-/* Control bits for status registers.  */
-#define V850E_UART_ASIS_PE	0x04 /* parity error */
-#define V850E_UART_ASIS_FE	0x02 /* framing error */
-#define V850E_UART_ASIS_OVE	0x01 /* overrun error */
-
-/* UART serial interface transmission status registers.  */
-#define V850E_UART_ASIF(n)	(*(volatile u8 *)V850E_UART_ASIF_ADDR(n))
-#define V850E_UART_ASIF_TXBF	0x02 /* transmit buffer flag (data in TXB) */
-#define V850E_UART_ASIF_TXSF	0x01 /* transmit shift flag (sending data) */
-
-/* UART receive buffer register.  */
-#define V850E_UART_RXB(n)	(*(volatile u8 *)V850E_UART_RXB_ADDR(n))
-
-/* UART transmit buffer register.  */
-#define V850E_UART_TXB(n)	(*(volatile u8 *)V850E_UART_TXB_ADDR(n))
-
-/* UART baud-rate generator control registers.  */
-#define V850E_UART_CKSR(n)	(*(volatile u8 *)V850E_UART_CKSR_ADDR(n))
-#define V850E_UART_CKSR_MAX	11
-#define V850E_UART_BRGC(n)	(*(volatile u8 *)V850E_UART_BRGC_ADDR(n))
-#define V850E_UART_BRGC_MIN	8
-
-
-#ifndef V850E_UART_CKSR_MAX_FREQ
-#define V850E_UART_CKSR_MAX_FREQ (25*1000*1000)
-#endif
-
-/* Calculate the minimum value for CKSR on this processor.  */
-static inline unsigned v850e_uart_cksr_min (void)
-{
-	int min = 0;
-	unsigned freq = V850E_UART_BASE_FREQ;
-	while (freq > V850E_UART_CKSR_MAX_FREQ) {
-		freq >>= 1;
-		min++;
-	}
-	return min;
-}
-
-
-/* Slightly abstract interface used by driver.  */
-
-
-/* Interrupts used by the UART.  */
-
-/* Received when the most recently transmitted character has been sent.  */
-#define V850E_UART_TX_IRQ(chan)		IRQ_INTST (chan)
-/* Received when a new character has been received.  */
-#define V850E_UART_RX_IRQ(chan)		IRQ_INTSR (chan)
-
-
-/* UART clock generator interface.  */
-
-/* This type encapsulates a particular uart frequency.  */
-typedef struct {
-	unsigned clk_divlog2;
-	unsigned brgen_count;
-} v850e_uart_speed_t;
-
-/* Calculate a uart speed from BAUD for this uart.  */
-static inline v850e_uart_speed_t v850e_uart_calc_speed (unsigned baud)
-{
-	v850e_uart_speed_t speed;
-
-	/* Calculate the log2 clock divider and baud-rate counter values
-	   (note that the UART divides the resulting clock by 2, so
-	   multiply BAUD by 2 here to compensate).  */
-	calc_counter_params (V850E_UART_BASE_FREQ, baud * 2,
-			     v850e_uart_cksr_min(),
-			     V850E_UART_CKSR_MAX, 8/*bits*/,
-			     &speed.clk_divlog2, &speed.brgen_count);
-
-	return speed;
-}
-
-/* Return the current speed of uart channel CHAN.  */
-static inline v850e_uart_speed_t v850e_uart_speed (unsigned chan)
-{
-	v850e_uart_speed_t speed;
-	speed.clk_divlog2 = V850E_UART_CKSR (chan);
-	speed.brgen_count = V850E_UART_BRGC (chan);
-	return speed;
-}
-
-/* Set the current speed of uart channel CHAN.  */
-static inline void v850e_uart_set_speed(unsigned chan,v850e_uart_speed_t speed)
-{
-	V850E_UART_CKSR (chan) = speed.clk_divlog2;
-	V850E_UART_BRGC (chan) = speed.brgen_count;
-}
-
-static inline int
-v850e_uart_speed_eq (v850e_uart_speed_t speed1, v850e_uart_speed_t speed2)
-{
-	return speed1.clk_divlog2 == speed2.clk_divlog2
-		&& speed1.brgen_count == speed2.brgen_count;
-}
-
-/* Minimum baud rate possible.  */
-#define v850e_uart_min_baud() \
-   ((V850E_UART_BASE_FREQ >> V850E_UART_CKSR_MAX) / (2 * 255) + 1)
-
-/* Maximum baud rate possible.  The error is quite high at max, though.  */
-#define v850e_uart_max_baud() \
-   ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / (2 *V850E_UART_BRGC_MIN))
-
-/* The `maximum' clock rate the uart can used, which is wanted (though not
-   really used in any useful way) by the serial framework.  */
-#define v850e_uart_max_clock() \
-   ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / 2)
-
-
-/* UART configuration interface.  */
-
-/* Type of the uart config register; must be a scalar.  */
-typedef u16 v850e_uart_config_t;
-
-/* The uart hardware config register for channel CHAN.  */
-#define V850E_UART_CONFIG(chan)		V850E_UART_ASIM (chan)
-
-/* This config bit set if the uart is enabled.  */
-#define V850E_UART_CONFIG_ENABLED	V850E_UART_ASIM_CAE
-/* If the uart _isn't_ enabled, store this value to it to do so.  */
-#define V850E_UART_CONFIG_INIT		V850E_UART_ASIM_CAE
-/* Store this config value to disable the uart channel completely.  */
-#define V850E_UART_CONFIG_FINI		0
-
-/* Setting/clearing these bits enable/disable TX/RX, respectively (but
-   otherwise generally leave things running).  */
-#define V850E_UART_CONFIG_RX_ENABLE	V850E_UART_ASIM_RXE
-#define V850E_UART_CONFIG_TX_ENABLE	V850E_UART_ASIM_TXE
-
-/* These masks define which config bits affect TX/RX modes, respectively.  */
-#define V850E_UART_CONFIG_RX_BITS \
-  (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_ISRM)
-#define V850E_UART_CONFIG_TX_BITS \
-  (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_SL_2)
-
-static inline v850e_uart_config_t v850e_uart_calc_config (unsigned cflags)
-{
-	v850e_uart_config_t config = 0;
-
-	/* Figure out new configuration of control register.  */
-	if (cflags & CSTOPB)
-		/* Number of stop bits, 1 or 2.  */
-		config |= V850E_UART_ASIM_SL_2;
-	if ((cflags & CSIZE) == CS8)
-		/* Number of data bits, 7 or 8.  */
-		config |= V850E_UART_ASIM_CL_8;
-	if (! (cflags & PARENB))
-		/* No parity check/generation.  */
-		config |= V850E_UART_ASIM_PS_NONE;
-	else if (cflags & PARODD)
-		/* Odd parity check/generation.  */
-		config |= V850E_UART_ASIM_PS_ODD;
-	else
-		/* Even parity check/generation.  */
-		config |= V850E_UART_ASIM_PS_EVEN;
-	if (cflags & CREAD)
-		/* Reading enabled.  */
-		config |= V850E_UART_ASIM_RXE;
-
-	config |= V850E_UART_ASIM_CAE;
-	config |= V850E_UART_ASIM_TXE; /* Writing is always enabled.  */
-	config |= V850E_UART_ASIM_ISRM; /* Errors generate a read-irq.  */
-
-	return config;
-}
-
-/* This should delay as long as necessary for a recently written config
-   setting to settle, before we turn the uart back on.  */
-static inline void
-v850e_uart_config_delay (v850e_uart_config_t config, v850e_uart_speed_t speed)
-{
-	/* The UART may not be reset properly unless we wait at least 2
-	   `basic-clocks' until turning on the TXE/RXE bits again.
-	   A `basic clock' is the clock used by the baud-rate generator,
-	   i.e., the cpu clock divided by the 2^new_clk_divlog2.
-	   The loop takes 2 insns, so loop CYCLES / 2 times.  */
-	register unsigned count = 1 << speed.clk_divlog2;
-	while (--count != 0)
-		/* nothing */;
-}
-
-
-/* RX/TX interface.  */
-
-/* Return true if all characters awaiting transmission on uart channel N
-   have been transmitted.  */
-#define v850e_uart_xmit_done(n)						      \
-   (! (V850E_UART_ASIF(n) & V850E_UART_ASIF_TXBF))
-/* Wait for this to be true.  */
-#define v850e_uart_wait_for_xmit_done(n)				      \
-   do { } while (! v850e_uart_xmit_done (n))
-
-/* Return true if uart channel N is ready to transmit a character.  */
-#define v850e_uart_xmit_ok(n)						      \
-   (v850e_uart_xmit_done(n) && v850e_uart_cts(n))
-/* Wait for this to be true.  */
-#define v850e_uart_wait_for_xmit_ok(n)					      \
-   do { } while (! v850e_uart_xmit_ok (n))
-
-/* Write character CH to uart channel CHAN.  */
-#define v850e_uart_putc(chan, ch)	(V850E_UART_TXB(chan) = (ch))
-
-/* Return latest character read on channel CHAN.  */
-#define v850e_uart_getc(chan)		V850E_UART_RXB (chan)
-
-/* Return bit-mask of uart error status.  */
-#define v850e_uart_err(chan)		V850E_UART_ASIS (chan)
-/* Various error bits set in the error result.  */
-#define V850E_UART_ERR_OVERRUN		V850E_UART_ASIS_OVE
-#define V850E_UART_ERR_FRAME		V850E_UART_ASIS_FE
-#define V850E_UART_ERR_PARITY		V850E_UART_ASIS_PE
-
-
-#endif /* __V850_V850E_UARTA_H__ */