Merge branch 'upstream'

6 files changed, 196 insertions, 83 deletions

diff --git a/include/media/audiochip.h b/include/media/audiochip.h
index b7d4b0930408..295d256ee811 100644
--- a/include/media/audiochip.h
+++ b/include/media/audiochip.h
@@ -23,11 +23,6 @@ enum audiochip {
 
 /* ---------------------------------------------------------------------- */
 
-/* v4l device was opened in Radio mode */
-#define AUDC_SET_RADIO        _IO('m',2)
-/* select from TV,radio,extern,MUTE */
-#define AUDC_SET_INPUT        _IOW('m',17,int)
-
 /* audio inputs */
 #define AUDIO_TUNER        0x00
 #define AUDIO_RADIO        0x01
@@ -40,15 +35,4 @@ enum audiochip {
 #define AUDIO_MUTE         0x80
 #define AUDIO_UNMUTE       0x81
 
-/* all the stuff below is obsolete and just here for reference.  I'll
- * remove it once the driver is tested and works fine.
- *
- * Instead creating alot of tiny API's for all kinds of different
- * chips, we'll just pass throuth the v4l ioctl structs (v4l2 not
- * yet...).  It is a bit less flexible, but most/all used i2c chips
- * make sense in v4l context only.  So I think that's acceptable...
- */
-
-/* misc stuff to pass around config info to i2c chips */
-#define AUDC_CONFIG_PINNACLE  _IOW('m',32,int)
 #endif /* AUDIOCHIP_H */
diff --git a/include/media/saa7146.h b/include/media/saa7146.h
index e5be2b9b846b..2bc634fcb7bb 100644
--- a/include/media/saa7146.h
+++ b/include/media/saa7146.h
@@ -21,14 +21,14 @@
 
 extern unsigned int saa7146_debug;
 
-//#define DEBUG_PROLOG printk("(0x%08x)(0x%08x) %s: %s(): ",(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,RPS_ADDR0))),(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,IER))),__stringify(KBUILD_MODNAME),__FUNCTION__)
+//#define DEBUG_PROLOG printk("(0x%08x)(0x%08x) %s: %s(): ",(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,RPS_ADDR0))),(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,IER))),KBUILD_MODNAME,__FUNCTION__)
 
 #ifndef DEBUG_VARIABLE
 	#define DEBUG_VARIABLE saa7146_debug
 #endif
 
-#define DEBUG_PROLOG printk("%s: %s(): ",__stringify(KBUILD_MODNAME),__FUNCTION__)
-#define INFO(x) { printk("%s: ",__stringify(KBUILD_MODNAME)); printk x; }
+#define DEBUG_PROLOG printk("%s: %s(): ",KBUILD_MODNAME,__FUNCTION__)
+#define INFO(x) { printk("%s: ",KBUILD_MODNAME); printk x; }
 
 #define ERR(x) { DEBUG_PROLOG; printk x; }
 
diff --git a/include/media/saa7146_vv.h b/include/media/saa7146_vv.h
index 16af9299315f..e5e749e984ee 100644
--- a/include/media/saa7146_vv.h
+++ b/include/media/saa7146_vv.h
@@ -178,6 +178,8 @@ struct saa7146_ext_vv
 
 	struct saa7146_extension_ioctls *ioctls;
 	int (*ioctl)(struct saa7146_fh*, unsigned int cmd, void *arg);
+
+	struct file_operations vbi_fops;
 };
 
 struct saa7146_use_ops  {
diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h
new file mode 100644
index 000000000000..15821ab14a9e
--- /dev/null
+++ b/include/media/tuner-types.h
@@ -0,0 +1,55 @@
+/*
+ * descriptions for simple tuners.
+ */
+
+#ifndef __TUNER_TYPES_H__
+#define __TUNER_TYPES_H__
+
+enum param_type {
+	TUNER_PARAM_TYPE_RADIO, \
+	TUNER_PARAM_TYPE_PAL, \
+	TUNER_PARAM_TYPE_SECAM, \
+	TUNER_PARAM_TYPE_NTSC
+};
+
+struct tuner_range {
+	unsigned short limit;
+	unsigned char cb;
+};
+
+struct tuner_params {
+	enum param_type type;
+	/* Many Philips based tuners have a comment like this in their
+	 * datasheet:
+	 *
+	 *   For channel selection involving band switching, and to ensure
+	 *   smooth tuning to the desired channel without causing
+	 *   unnecessary charge pump action, it is recommended to consider
+	 *   the difference between wanted channel frequency and the
+	 *   current channel frequency.  Unnecessary charge pump action
+	 *   will result in very low tuning voltage which may drive the
+	 *   oscillator to extreme conditions.
+	 *
+	 * Set cb_first_if_lower_freq to 1, if this check is
+	 * required for this tuner.
+	 *
+	 * I tested this for PAL by first setting the TV frequency to
+	 * 203 MHz and then switching to 96.6 MHz FM radio. The result was
+	 * static unless the control byte was sent first.
+	 */
+	unsigned int cb_first_if_lower_freq:1;
+	unsigned char config; /* to be moved into struct tuner_range for dvb-pll merge */
+
+	unsigned int count;
+	struct tuner_range *ranges;
+};
+
+struct tunertype {
+	char *name;
+	struct tuner_params *params;
+};
+
+extern struct tunertype tuners[];
+extern unsigned const int tuner_count;
+
+#endif
diff --git a/include/media/tuner.h b/include/media/tuner.h
index faa0f8e3091b..a5beeac495c7 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -23,6 +23,7 @@
 #define _TUNER_H
 
 #include <linux/videodev2.h>
+#include <media/tuner-types.h>
 
 #define ADDR_UNSET (255)
 
@@ -82,9 +83,9 @@
 #define TUNER_PHILIPS_FM1236_MK3	43
 
 #define TUNER_PHILIPS_4IN1		44	/* ATI TV Wonder Pro - Conexant */
-/* Microtune mergeged with Temic 12/31/1999 partially financed by Alps - these may be similar to Temic */
+/* Microtune merged with Temic 12/31/1999 partially financed by Alps - these may be similar to Temic */
 #define TUNER_MICROTUNE_4049FM5 	45
-#define TUNER_MICROTUNE_4042_FI5	46
+#define TUNER_PANASONIC_VP27		46
 #define TUNER_LG_NTSC_TAPE		47
 
 #define TUNER_TNF_8831BGFF		48
@@ -102,7 +103,7 @@
 #define TUNER_YMEC_TVF_8531MF		58
 #define TUNER_YMEC_TVF_5533MF		59	/* Pixelview Pro Ultra NTSC */
 
-#define TUNER_THOMSON_DTT7611		60	/* DViCO FusionHDTV 3 Gold-T */
+#define TUNER_THOMSON_DTT761X		60	/* DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A */
 #define TUNER_TENA_9533_DI		61
 #define TUNER_TEA5767			62	/* Only FM Radio Tuner */
 #define TUNER_PHILIPS_FMD1216ME_MK3	63
@@ -114,48 +115,28 @@
 
 #define TUNER_PHILIPS_TUV1236D		68	/* ATI HDTV Wonder */
 #define TUNER_TNF_5335MF                69	/* Sabrent Bt848   */
-
-#define NOTUNER 0
-#define PAL     1	/* PAL_BG */
-#define PAL_I   2
-#define NTSC    3
-#define SECAM   4
-#define ATSC    5
-#define RADIO   6
-
-#define NoTuner 0
-#define Philips 1
-#define TEMIC   2
-#define Sony    3
-#define Alps    4
-#define LGINNOTEK 5
-#define SHARP   6
-#define Samsung 7
-#define Microtune 8
-#define HITACHI 9
-#define Panasonic 10
-#define TCL     11
-#define THOMSON 12
-
-#define TUNER_SET_TYPE_ADDR          _IOW('T',3,int)
-#define TUNER_SET_STANDBY            _IOW('T',4,int)
-#define TDA9887_SET_CONFIG           _IOW('t',5,int)
+#define TUNER_SAMSUNG_TCPN_2121P30A     70 	/* Hauppauge PVR-500MCE NTSC */
 
 /* tv card specific */
-# define TDA9887_PRESENT             (1<<0)
-# define TDA9887_PORT1_INACTIVE      (1<<1)
-# define TDA9887_PORT2_INACTIVE      (1<<2)
-# define TDA9887_QSS                 (1<<3)
-# define TDA9887_INTERCARRIER        (1<<4)
-# define TDA9887_PORT1_ACTIVE        (1<<5)
-# define TDA9887_PORT2_ACTIVE        (1<<6)
-# define TDA9887_INTERCARRIER_NTSC   (1<<7)
+#define TDA9887_PRESENT 		(1<<0)
+#define TDA9887_PORT1_INACTIVE 		(1<<1)
+#define TDA9887_PORT2_INACTIVE 		(1<<2)
+#define TDA9887_QSS 			(1<<3)
+#define TDA9887_INTERCARRIER 		(1<<4)
+#define TDA9887_PORT1_ACTIVE 		(1<<5)
+#define TDA9887_PORT2_ACTIVE 		(1<<6)
+#define TDA9887_INTERCARRIER_NTSC 	(1<<7)
+/* Tuner takeover point adjustment, in dB, -16 <= top <= 15 */
+#define TDA9887_TOP_MASK 		(0x3f << 8)
+#define TDA9887_TOP_SET 		(1 << 13)
+#define TDA9887_TOP(top) 		(TDA9887_TOP_SET | (((16 + (top)) & 0x1f) << 8))
+
 /* config options */
-# define TDA9887_DEEMPHASIS_MASK     (3<<16)
-# define TDA9887_DEEMPHASIS_NONE     (1<<16)
-# define TDA9887_DEEMPHASIS_50       (2<<16)
-# define TDA9887_DEEMPHASIS_75       (3<<16)
-# define TDA9887_AUTOMUTE            (1<<18)
+#define TDA9887_DEEMPHASIS_MASK 	(3<<16)
+#define TDA9887_DEEMPHASIS_NONE 	(1<<16)
+#define TDA9887_DEEMPHASIS_50 		(2<<16)
+#define TDA9887_DEEMPHASIS_75 		(3<<16)
+#define TDA9887_AUTOMUTE 		(1<<18)
 
 #ifdef __KERNEL__
 
@@ -167,10 +148,26 @@ enum tuner_mode {
 	T_STANDBY	= 1 << 31
 };
 
+/* Older boards only had a single tuner device. Nowadays multiple tuner
+   devices may be present on a single board. Using TUNER_SET_TYPE_ADDR
+   to pass the tuner_setup structure it is possible to setup each tuner
+   device in turn.
+
+   Since multiple devices may be present it is no longer sufficient to
+   send a command to a single i2c device. Instead you should broadcast
+   the command to all i2c devices.
+
+   By setting the mode_mask correctly you can select which commands are
+   accepted by a specific tuner device. For example, set mode_mask to
+   T_RADIO if the device is a radio-only tuner. That specific tuner will
+   only accept commands when the tuner is in radio mode and ignore them
+   when the tuner is set to TV mode.
+ */
+
 struct tuner_setup {
-	unsigned short	addr;
-	unsigned int	type;
-	unsigned int	mode_mask;
+	unsigned short	addr; 	/* I2C address */
+	unsigned int	type;   /* Tuner type */
+	unsigned int	mode_mask;  /* Allowed tuner modes */
 };
 
 struct tuner {
@@ -182,7 +179,9 @@ struct tuner {
 	unsigned int mode;
 	unsigned int mode_mask;	/* Combination of allowable modes */
 
-	unsigned int freq;	/* keep track of the current settings */
+	unsigned int tv_freq;	/* keep track of the current settings */
+	unsigned int radio_freq;
+	u16 	     last_div;
 	unsigned int audmode;
 	v4l2_std_id  std;
 
@@ -200,14 +199,13 @@ struct tuner {
 	unsigned int sgIF;
 
 	/* function ptrs */
-	void (*tv_freq)(struct i2c_client *c, unsigned int freq);
-	void (*radio_freq)(struct i2c_client *c, unsigned int freq);
+	void (*set_tv_freq)(struct i2c_client *c, unsigned int freq);
+	void (*set_radio_freq)(struct i2c_client *c, unsigned int freq);
 	int  (*has_signal)(struct i2c_client *c);
 	int  (*is_stereo)(struct i2c_client *c);
 	void (*standby)(struct i2c_client *c);
 };
 
-extern unsigned int tuner_debug;
 extern unsigned const int tuner_count;
 
 extern int microtune_init(struct i2c_client *c);
@@ -218,15 +216,16 @@ extern int default_tuner_init(struct i2c_client *c);
 extern int tea5767_autodetection(struct i2c_client *c);
 
 #define tuner_warn(fmt, arg...) do {\
-	printk(KERN_WARNING "%s %d-%04x: " fmt, t->i2c.driver->name, \
-			t->i2c.adapter->nr, t->i2c.addr , ##arg); } while (0)
+	printk(KERN_WARNING "%s %d-%04x: " fmt, t->i2c.driver->driver.name, \
+			i2c_adapter_id(t->i2c.adapter), t->i2c.addr , ##arg); } while (0)
 #define tuner_info(fmt, arg...) do {\
-	printk(KERN_INFO "%s %d-%04x: " fmt, t->i2c.driver->name, \
-			t->i2c.adapter->nr, t->i2c.addr , ##arg); } while (0)
+	printk(KERN_INFO "%s %d-%04x: " fmt, t->i2c.driver->driver.name, \
+			i2c_adapter_id(t->i2c.adapter), t->i2c.addr , ##arg); } while (0)
 #define tuner_dbg(fmt, arg...) do {\
+	extern int tuner_debug; \
 	if (tuner_debug) \
-		printk(KERN_DEBUG "%s %d-%04x: " fmt, t->i2c.driver->name, \
-			t->i2c.adapter->nr, t->i2c.addr , ##arg); } while (0)
+		printk(KERN_DEBUG "%s %d-%04x: " fmt, t->i2c.driver->driver.name, \
+			i2c_adapter_id(t->i2c.adapter), t->i2c.addr , ##arg); } while (0)
 
 #endif /* __KERNEL__ */
 
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index d3fd48157eb8..d4030a7e16e0 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -26,12 +26,56 @@
 #ifndef V4L2_COMMON_H_
 #define V4L2_COMMON_H_
 
-/* VIDIOC_INT_AUDIO_CLOCK_FREQ */
-enum v4l2_audio_clock_freq {
-	V4L2_AUDCLK_32_KHZ  = 32000,
-	V4L2_AUDCLK_441_KHZ = 44100,
-	V4L2_AUDCLK_48_KHZ  = 48000,
-};
+/* v4l debugging and diagnostics */
+
+/* Common printk constucts for v4l-i2c drivers. These macros create a unique
+   prefix consisting of the driver name, the adapter number and the i2c
+   address. */
+#define v4l_printk(level, name, adapter, addr, fmt, arg...) \
+	printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg)
+
+#define v4l_client_printk(level, client, fmt, arg...)			    \
+	v4l_printk(level, (client)->driver->driver.name, (client)->adapter, \
+		   (client)->addr, fmt , ## arg)
+
+#define v4l_err(client, fmt, arg...) \
+	v4l_client_printk(KERN_ERR, client, fmt , ## arg)
+
+#define v4l_warn(client, fmt, arg...) \
+	v4l_client_printk(KERN_WARNING, client, fmt , ## arg)
+
+#define v4l_info(client, fmt, arg...) \
+	v4l_client_printk(KERN_INFO, client, fmt , ## arg)
+
+/* These three macros assume that the debug level is set with a module
+   parameter called 'debug'. */
+#define v4l_dbg(level, debug, client, fmt, arg...)			     \
+	do { 								     \
+		if (debug >= (level))					     \
+			v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \
+	} while (0)
+
+/* Prints the ioctl in a human-readable format */
+extern void v4l_printk_ioctl(unsigned int cmd);
+
+/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */
+#define v4l_print_ioctl(name, cmd)  		 \
+	do {  					 \
+		printk(KERN_DEBUG "%s: ", name); \
+		v4l_printk_ioctl(cmd);		 \
+	} while (0)
+
+/* Use this macro in I2C drivers where 'client' is the struct i2c_client
+   pointer */
+#define v4l_i2c_print_ioctl(client, cmd) 		   \
+	do {      					   \
+		v4l_client_printk(KERN_DEBUG, client, ""); \
+		v4l_printk_ioctl(cmd);			   \
+	} while (0)
+
+/* ------------------------------------------------------------------------- */
+
+/* Internal ioctls */
 
 /* VIDIOC_INT_G_REGISTER and VIDIOC_INT_S_REGISTER */
 struct v4l2_register {
@@ -70,6 +114,27 @@ enum v4l2_chip_ident {
 	V4L2_IDENT_CX25843 = 243,
 };
 
+/* audio ioctls */
+/* v4l device was opened in Radio mode */
+#define AUDC_SET_RADIO        _IO('d',88)
+/* select from TV,radio,extern,MUTE */
+#define AUDC_SET_INPUT        _IOW('d',89,int)
+
+/* msp3400 ioctl: will be removed in the near future */
+struct msp_matrix {
+  int input;
+  int output;
+};
+#define MSP_SET_MATRIX     _IOW('m',17,struct msp_matrix)
+
+/* tuner ioctls */
+/* Sets tuner type and its I2C addr */
+#define TUNER_SET_TYPE_ADDR          _IOW('d',90,int)
+/* Puts tuner on powersaving state, disabling it, except for i2c */
+#define TUNER_SET_STANDBY            _IOW('d',91,int)
+/* Sets tda9887 specific stuff, like port1, port2 and qss */
+#define TDA9887_SET_CONFIG           _IOW('d',92,int)
+
 /* only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */
 #define	VIDIOC_INT_S_REGISTER 		_IOR ('d', 100, struct v4l2_register)
 #define	VIDIOC_INT_G_REGISTER 		_IOWR('d', 101, struct v4l2_register)
@@ -77,10 +142,12 @@ enum v4l2_chip_ident {
 /* Reset the I2C chip */
 #define VIDIOC_INT_RESET            	_IO  ('d', 102)
 
-/* Set the frequency of the audio clock output.
+/* Set the frequency (in Hz) of the audio clock output.
    Used to slave an audio processor to the video decoder, ensuring that audio
-   and video remain synchronized. */
-#define VIDIOC_INT_AUDIO_CLOCK_FREQ 	_IOR ('d', 103, enum v4l2_audio_clock_freq)
+   and video remain synchronized.
+   Usual values for the frequency are 48000, 44100 or 32000 Hz.
+   If the frequency is not supported, then -EINVAL is returned. */
+#define VIDIOC_INT_AUDIO_CLOCK_FREQ 	_IOW ('d', 103, u32)
 
 /* Video decoders that support sliced VBI need to implement this ioctl.
    Field p of the v4l2_sliced_vbi_line struct is set to the start of the VBI
@@ -107,4 +174,10 @@ enum v4l2_chip_ident {
    be made. */
 #define VIDIOC_INT_G_CHIP_IDENT		_IOR ('d', 107, enum v4l2_chip_ident *)
 
+/* Sets I2S speed in bps. This is used to provide a standard way to select I2S
+   clock used by driving digital audio streams at some board designs.
+   Usual values for the frequency are 1024000 and 2048000.
+   If the frequency is not supported, then -EINVAL is returned. */
+#define VIDIOC_INT_I2S_CLOCK_FREQ 	_IOW ('d', 108, u32)
+
 #endif /* V4L2_COMMON_H_ */