nl80211: support beacon report scanning

Beacon report radio measurement requires reporting observed BSSs
on the channels specified in the beacon request. If the measurement
mode is set to passive or active, it requires actually performing a
scan (passive or active, accordingly), and reporting the time that
the scan was started and the time each beacon/probe was received
(both in terms of TSF of the BSS of the requesting AP). If the
request mode is table, this information is optional.
In addition, the radio measurement request specifies the channel
dwell time for the measurement.

In order to use scan for beacon report when the mode is active or
passive, add a parameter to scan request that specifies the
channel dwell time, and add scan start time and beacon received time
to scan results information.

Supporting beacon report is required for Multi Band Operation (MBO).

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 35 insertions, 5 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index fa4f0f793817..e2658e392a1f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1424,6 +1424,21 @@ struct cfg80211_ssid {
 };
 
 /**
+ * struct cfg80211_scan_info - information about completed scan
+ * @scan_start_tsf: scan start time in terms of the TSF of the BSS that the
+ *	wireless device that requested the scan is connected to. If this
+ *	information is not available, this field is left zero.
+ * @tsf_bssid: the BSSID according to which %scan_start_tsf is set.
+ * @aborted: set to true if the scan was aborted for any reason,
+ *	userspace will be notified of that
+ */
+struct cfg80211_scan_info {
+	u64 scan_start_tsf;
+	u8 tsf_bssid[ETH_ALEN] __aligned(2);
+	bool aborted;
+};
+
+/**
  * struct cfg80211_scan_request - scan request description
  *
  * @ssids: SSIDs to scan for (active scan only)
@@ -1433,12 +1448,17 @@ struct cfg80211_ssid {
  * @scan_width: channel width for scanning
  * @ie: optional information element(s) to add into Probe Request or %NULL
  * @ie_len: length of ie in octets
+ * @duration: how long to listen on each channel, in TUs. If
+ *	%duration_mandatory is not set, this is the maximum dwell time and
+ *	the actual dwell time may be shorter.
+ * @duration_mandatory: if set, the scan duration must be as specified by the
+ *	%duration field.
  * @flags: bit field of flags controlling operation
  * @rates: bitmap of rates to advertise for each band
  * @wiphy: the wiphy this was for
  * @scan_start: time (in jiffies) when the scan started
  * @wdev: the wireless device to scan for
- * @aborted: (internal) scan request was notified as aborted
+ * @info: (internal) information about completed scan
  * @notified: (internal) scan request was notified as done or aborted
  * @no_cck: used to send probe requests at non CCK rate in 2GHz band
  * @mac_addr: MAC address used with randomisation
@@ -1454,6 +1474,8 @@ struct cfg80211_scan_request {
 	enum nl80211_bss_scan_width scan_width;
 	const u8 *ie;
 	size_t ie_len;
+	u16 duration;
+	bool duration_mandatory;
 	u32 flags;
 
 	u32 rates[NUM_NL80211_BANDS];
@@ -1467,7 +1489,8 @@ struct cfg80211_scan_request {
 	/* internal */
 	struct wiphy *wiphy;
 	unsigned long scan_start;
-	bool aborted, notified;
+	struct cfg80211_scan_info info;
+	bool notified;
 	bool no_cck;
 
 	/* keep last */
@@ -1600,12 +1623,19 @@ enum cfg80211_signal_type {
  *	buffered on the device) and be accurate to about 10ms.
  *	If the frame isn't buffered, just passing the return value of
  *	ktime_get_boot_ns() is likely appropriate.
+ * @parent_tsf: the time at the start of reception of the first octet of the
+ *	timestamp field of the frame. The time is the TSF of the BSS specified
+ *	by %parent_bssid.
+ * @parent_bssid: the BSS according to which %parent_tsf is set. This is set to
+ *	the BSS that requested the scan in which the beacon/probe was received.
  */
 struct cfg80211_inform_bss {
 	struct ieee80211_channel *chan;
 	enum nl80211_bss_scan_width scan_width;
 	s32 signal;
 	u64 boottime_ns;
+	u64 parent_tsf;
+	u8 parent_bssid[ETH_ALEN] __aligned(2);
 };
 
 /**
@@ -4067,10 +4097,10 @@ const char *reg_initiator_name(enum nl80211_reg_initiator initiator);
  * cfg80211_scan_done - notify that scan finished
  *
  * @request: the corresponding scan request
- * @aborted: set to true if the scan was aborted for any reason,
- *	userspace will be notified of that
+ * @info: information about the completed scan
  */
-void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted);
+void cfg80211_scan_done(struct cfg80211_scan_request *request,
+			struct cfg80211_scan_info *info);
 
 /**
  * cfg80211_sched_scan_results - notify that new scan results are available