Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Add BQL support to via-rhine, from Tino Reichardt.

 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
    can support hw switch offloading.  From Floria Fainelli.

 3) Allow 'ip address' commands to initiate multicast group join/leave,
    from Madhu Challa.

 4) Many ipv4 FIB lookup optimizations from Alexander Duyck.

 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
    Borkmann.

 6) Remove the ugly compat support in ARP for ugly layers like ax25,
    rose, etc.  And use this to clean up the neigh layer, then use it to
    implement MPLS support.  All from Eric Biederman.

 7) Support L3 forwarding offloading in switches, from Scott Feldman.

 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
    up route lookups even further.  From Alexander Duyck.

 9) Many improvements and bug fixes to the rhashtable implementation,
    from Herbert Xu and Thomas Graf.  In particular, in the case where
    an rhashtable user bulk adds a large number of items into an empty
    table, we expand the table much more sanely.

10) Don't make the tcp_metrics hash table per-namespace, from Eric
    Biederman.

11) Extend EBPF to access SKB fields, from Alexei Starovoitov.

12) Split out new connection request sockets so that they can be
    established in the main hash table.  Much less false sharing since
    hash lookups go direct to the request sockets instead of having to
    go first to the listener then to the request socks hashed
    underneath.  From Eric Dumazet.

13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.

14) Support stable privacy address generation for RFC7217 in IPV6.  From
    Hannes Frederic Sowa.

15) Hash network namespace into IP frag IDs, also from Hannes Frederic
    Sowa.

16) Convert PTP get/set methods to use 64-bit time, from Richard
    Cochran.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
  fm10k: Bump driver version to 0.15.2
  fm10k: corrected VF multicast update
  fm10k: mbx_update_max_size does not drop all oversized messages
  fm10k: reset head instead of calling update_max_size
  fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
  fm10k: update xcast mode before synchronizing multicast addresses
  fm10k: start service timer on probe
  fm10k: fix function header comment
  fm10k: comment next_vf_mbx flow
  fm10k: don't handle mailbox events in iov_event path and always process mailbox
  fm10k: use separate workqueue for fm10k driver
  fm10k: Set PF queues to unlimited bandwidth during virtualization
  fm10k: expose tx_timeout_count as an ethtool stat
  fm10k: only increment tx_timeout_count in Tx hang path
  fm10k: remove extraneous "Reset interface" message
  fm10k: separate PF only stats so that VF does not display them
  fm10k: use hw->mac.max_queues for stats
  fm10k: only show actual queues, not the maximum in hardware
  fm10k: allow creation of VLAN on default vid
  fm10k: fix unused warnings
  ...

1 files changed, 210 insertions, 41 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index d52914b75331..b4bef1152c05 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -84,6 +84,39 @@
  *
  */
 
+/**
+ * DOC: mac80211 software tx queueing
+ *
+ * mac80211 provides an optional intermediate queueing implementation designed
+ * to allow the driver to keep hardware queues short and provide some fairness
+ * between different stations/interfaces.
+ * In this model, the driver pulls data frames from the mac80211 queue instead
+ * of letting mac80211 push them via drv_tx().
+ * Other frames (e.g. control or management) are still pushed using drv_tx().
+ *
+ * Drivers indicate that they use this model by implementing the .wake_tx_queue
+ * driver operation.
+ *
+ * Intermediate queues (struct ieee80211_txq) are kept per-sta per-tid, with a
+ * single per-vif queue for multicast data frames.
+ *
+ * The driver is expected to initialize its private per-queue data for stations
+ * and interfaces in the .add_interface and .sta_add ops.
+ *
+ * The driver can't access the queue directly. To dequeue a frame, it calls
+ * ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a queue, it
+ * calls the .wake_tx_queue driver op.
+ *
+ * For AP powersave TIM handling, the driver only needs to indicate if it has
+ * buffered packets in the driver specific data structures by calling
+ * ieee80211_sta_set_buffered(). For frames buffered in the ieee80211_txq
+ * struct, mac80211 sets the appropriate TIM PVB bits and calls
+ * .release_buffered_frames().
+ * In that callback the driver is therefore expected to release its own
+ * buffered frames and afterwards also frames from the ieee80211_txq (obtained
+ * via the usual ieee80211_tx_dequeue).
+ */
+
 struct device;
 
 /**
@@ -301,17 +334,86 @@ enum ieee80211_bss_change {
 #define IEEE80211_BSS_ARP_ADDR_LIST_LEN 4
 
 /**
- * enum ieee80211_rssi_event - RSSI threshold event
- * An indicator for when RSSI goes below/above a certain threshold.
- * @RSSI_EVENT_HIGH: AP's rssi crossed the high threshold set by the driver.
- * @RSSI_EVENT_LOW: AP's rssi crossed the low threshold set by the driver.
+ * enum ieee80211_event_type - event to be notified to the low level driver
+ * @RSSI_EVENT: AP's rssi crossed the a threshold set by the driver.
+ * @MLME_EVENT: event related to MLME
  */
-enum ieee80211_rssi_event {
+enum ieee80211_event_type {
+	RSSI_EVENT,
+	MLME_EVENT,
+};
+
+/**
+ * enum ieee80211_rssi_event_data - relevant when event type is %RSSI_EVENT
+ * @RSSI_EVENT_HIGH: AP's rssi went below the threshold set by the driver.
+ * @RSSI_EVENT_LOW: AP's rssi went above the threshold set by the driver.
+ */
+enum ieee80211_rssi_event_data {
 	RSSI_EVENT_HIGH,
 	RSSI_EVENT_LOW,
 };
 
 /**
+ * enum ieee80211_rssi_event - data attached to an %RSSI_EVENT
+ * @data: See &enum ieee80211_rssi_event_data
+ */
+struct ieee80211_rssi_event {
+	enum ieee80211_rssi_event_data data;
+};
+
+/**
+ * enum ieee80211_mlme_event_data - relevant when event type is %MLME_EVENT
+ * @AUTH_EVENT: the MLME operation is authentication
+ * @ASSOC_EVENT: the MLME operation is association
+ * @DEAUTH_RX_EVENT: deauth received..
+ * @DEAUTH_TX_EVENT: deauth sent.
+ */
+enum ieee80211_mlme_event_data {
+	AUTH_EVENT,
+	ASSOC_EVENT,
+	DEAUTH_RX_EVENT,
+	DEAUTH_TX_EVENT,
+};
+
+/**
+ * enum ieee80211_mlme_event_status - relevant when event type is %MLME_EVENT
+ * @MLME_SUCCESS: the MLME operation completed successfully.
+ * @MLME_DENIED: the MLME operation was denied by the peer.
+ * @MLME_TIMEOUT: the MLME operation timed out.
+ */
+enum ieee80211_mlme_event_status {
+	MLME_SUCCESS,
+	MLME_DENIED,
+	MLME_TIMEOUT,
+};
+
+/**
+ * enum ieee80211_mlme_event - data attached to an %MLME_EVENT
+ * @data: See &enum ieee80211_mlme_event_data
+ * @status: See &enum ieee80211_mlme_event_status
+ * @reason: the reason code if applicable
+ */
+struct ieee80211_mlme_event {
+	enum ieee80211_mlme_event_data data;
+	enum ieee80211_mlme_event_status status;
+	u16 reason;
+};
+
+/**
+ * struct ieee80211_event - event to be sent to the driver
+ * @type The event itself. See &enum ieee80211_event_type.
+ * @rssi: relevant if &type is %RSSI_EVENT
+ * @mlme: relevant if &type is %AUTH_EVENT
+ */
+struct ieee80211_event {
+	enum ieee80211_event_type type;
+	union {
+		struct ieee80211_rssi_event rssi;
+		struct ieee80211_mlme_event mlme;
+	} u;
+};
+
+/**
  * struct ieee80211_bss_conf - holds the BSS's changing parameters
  *
  * This structure keeps information about a BSS (and an association
@@ -337,12 +439,15 @@ enum ieee80211_rssi_event {
  *	HW flag %IEEE80211_HW_TIMING_BEACON_ONLY is set, then this can
  *	only come from a beacon, but might not become valid until after
  *	association when a beacon is received (which is notified with the
- *	%BSS_CHANGED_DTIM flag.)
+ *	%BSS_CHANGED_DTIM flag.). See also sync_dtim_count important notice.
  * @sync_device_ts: the device timestamp corresponding to the sync_tsf,
  *	the driver/device can use this to calculate synchronisation
- *	(see @sync_tsf)
+ *	(see @sync_tsf). See also sync_dtim_count important notice.
  * @sync_dtim_count: Only valid when %IEEE80211_HW_TIMING_BEACON_ONLY
  *	is requested, see @sync_tsf/@sync_device_ts.
+ *	IMPORTANT: These three sync_* parameters would possibly be out of sync
+ *	by the time the driver will use them. The synchronized view is currently
+ *	guaranteed only in certain callbacks.
  * @beacon_int: beacon interval
  * @assoc_capability: capabilities taken from assoc resp
  * @basic_rates: bitmap of basic rates, each bit stands for an
@@ -1234,6 +1339,7 @@ enum ieee80211_vif_flags {
  *	monitor interface (if that is requested.)
  * @drv_priv: data area for driver use, will always be aligned to
  *	sizeof(void *).
+ * @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
  */
 struct ieee80211_vif {
 	enum nl80211_iftype type;
@@ -1245,6 +1351,8 @@ struct ieee80211_vif {
 	u8 cab_queue;
 	u8 hw_queue[IEEE80211_NUM_ACS];
 
+	struct ieee80211_txq *txq;
+
 	struct ieee80211_chanctx_conf __rcu *chanctx_conf;
 
 	u32 driver_flags;
@@ -1279,6 +1387,19 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
 struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
 
 /**
+ * ieee80211_vif_to_wdev - return a wdev struct from a vif
+ * @vif: the vif to get the wdev for
+ *
+ * This can be used by mac80211 drivers with direct cfg80211 APIs
+ * (like the vendor commands) that needs to get the wdev for a vif.
+ *
+ * Note that this function may return %NULL if the given wdev isn't
+ * associated with a vif that the driver knows about (e.g. monitor
+ * or AP_VLAN interfaces.)
+ */
+struct wireless_dev *ieee80211_vif_to_wdev(struct ieee80211_vif *vif);
+
+/**
  * enum ieee80211_key_flags - key flags
  *
  * These flags are used for communication about keys between the driver
@@ -1472,7 +1593,8 @@ struct ieee80211_sta_rates {
  * @supp_rates: Bitmap of supported rates (per band)
  * @ht_cap: HT capabilities of this STA; restricted to our own capabilities
  * @vht_cap: VHT capabilities of this STA; restricted to our own capabilities
- * @wme: indicates whether the STA supports QoS/WME.
+ * @wme: indicates whether the STA supports QoS/WME (if local devices does,
+ *	otherwise always false)
  * @drv_priv: data area for driver use, will always be aligned to
  *	sizeof(void *), size is determined in hw information.
  * @uapsd_queues: bitmap of queues configured for uapsd. Only valid
@@ -1488,6 +1610,8 @@ struct ieee80211_sta_rates {
  * @tdls: indicates whether the STA is a TDLS peer
  * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only
  *	valid if the STA is a TDLS peer in the first place.
+ * @mfp: indicates whether the STA uses management frame protection or not.
+ * @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
  */
 struct ieee80211_sta {
 	u32 supp_rates[IEEE80211_NUM_BANDS];
@@ -1504,6 +1628,9 @@ struct ieee80211_sta {
 	struct ieee80211_sta_rates __rcu *rates;
 	bool tdls;
 	bool tdls_initiator;
+	bool mfp;
+
+	struct ieee80211_txq *txq[IEEE80211_NUM_TIDS];
 
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
@@ -1533,6 +1660,27 @@ struct ieee80211_tx_control {
 };
 
 /**
+ * struct ieee80211_txq - Software intermediate tx queue
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @sta: station table entry, %NULL for per-vif queue
+ * @tid: the TID for this queue (unused for per-vif queue)
+ * @ac: the AC for this queue
+ *
+ * The driver can obtain packets from this queue by calling
+ * ieee80211_tx_dequeue().
+ */
+struct ieee80211_txq {
+	struct ieee80211_vif *vif;
+	struct ieee80211_sta *sta;
+	u8 tid;
+	u8 ac;
+
+	/* must be last */
+	u8 drv_priv[0] __aligned(sizeof(void *));
+};
+
+/**
  * enum ieee80211_hw_flags - hardware flags
  *
  * These flags are used to indicate hardware capabilities to
@@ -1756,6 +1904,8 @@ enum ieee80211_hw_flags {
  *	within &struct ieee80211_sta.
  * @chanctx_data_size: size (in bytes) of the drv_priv data area
  *	within &struct ieee80211_chanctx_conf.
+ * @txq_data_size: size (in bytes) of the drv_priv data area
+ *	within @struct ieee80211_txq.
  *
  * @max_rates: maximum number of alternate rate retry stages the hw
  *	can handle.
@@ -1804,6 +1954,9 @@ enum ieee80211_hw_flags {
  * @n_cipher_schemes: a size of an array of cipher schemes definitions.
  * @cipher_schemes: a pointer to an array of cipher scheme definitions
  *	supported by HW.
+ *
+ * @txq_ac_max_pending: maximum number of frames per AC pending in all txq
+ *	entries for a vif.
  */
 struct ieee80211_hw {
 	struct ieee80211_conf conf;
@@ -1816,6 +1969,7 @@ struct ieee80211_hw {
 	int vif_data_size;
 	int sta_data_size;
 	int chanctx_data_size;
+	int txq_data_size;
 	u16 queues;
 	u16 max_listen_interval;
 	s8 max_signal;
@@ -1832,6 +1986,7 @@ struct ieee80211_hw {
 	u8 uapsd_max_sp_len;
 	u8 n_cipher_schemes;
 	const struct ieee80211_cipher_scheme *cipher_schemes;
+	int txq_ac_max_pending;
 };
 
 /**
@@ -2844,8 +2999,9 @@ enum ieee80211_reconfig_type {
  * @set_bitrate_mask: Set a mask of rates to be used for rate control selection
  *	when transmitting a frame. Currently only legacy rates are handled.
  *	The callback can sleep.
- * @rssi_callback: Notify driver when the average RSSI goes above/below
- *	thresholds that were registered previously. The callback can sleep.
+ * @event_callback: Notify driver about any event in mac80211. See
+ *	&enum ieee80211_event_type for the different types.
+ *	The callback can sleep.
  *
  * @release_buffered_frames: Release buffered frames according to the given
  *	parameters. In the case where the driver buffers some frames for
@@ -2993,6 +3149,8 @@ enum ieee80211_reconfig_type {
  *	response template is provided, together with the location of the
  *	switch-timing IE within the template. The skb can only be used within
  *	the function call.
+ *
+ * @wake_tx_queue: Called when new packets have been added to the queue.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -3141,9 +3299,9 @@ struct ieee80211_ops {
 	bool (*tx_frames_pending)(struct ieee80211_hw *hw);
 	int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 				const struct cfg80211_bitrate_mask *mask);
-	void (*rssi_callback)(struct ieee80211_hw *hw,
-			      struct ieee80211_vif *vif,
-			      enum ieee80211_rssi_event rssi_event);
+	void (*event_callback)(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
+			       const struct ieee80211_event *event);
 
 	void (*allow_buffered_frames)(struct ieee80211_hw *hw,
 				      struct ieee80211_sta *sta,
@@ -3224,6 +3382,9 @@ struct ieee80211_ops {
 	void (*tdls_recv_channel_switch)(struct ieee80211_hw *hw,
 					 struct ieee80211_vif *vif,
 					 struct ieee80211_tdls_ch_sw_params *params);
+
+	void (*wake_tx_queue)(struct ieee80211_hw *hw,
+			      struct ieee80211_txq *txq);
 };
 
 /**
@@ -4343,13 +4504,33 @@ void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw);
  *	haven't been re-added to the driver yet.
  * @IEEE80211_IFACE_ITER_RESUME_ALL: During resume, iterate over all
  *	interfaces, even if they haven't been re-added to the driver yet.
+ * @IEEE80211_IFACE_ITER_ACTIVE: Iterate only active interfaces (netdev is up).
  */
 enum ieee80211_interface_iteration_flags {
 	IEEE80211_IFACE_ITER_NORMAL	= 0,
 	IEEE80211_IFACE_ITER_RESUME_ALL	= BIT(0),
+	IEEE80211_IFACE_ITER_ACTIVE	= BIT(1),
 };
 
 /**
+ * ieee80211_iterate_interfaces - iterate interfaces
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware and calls the callback for them. This includes active as well as
+ * inactive interfaces. This function allows the iterator function to sleep.
+ * Will iterate over a new interface during add_interface().
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iter_flags: iteration flags, see &enum ieee80211_interface_iteration_flags
+ * @iterator: the iterator function to call
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_interfaces(struct ieee80211_hw *hw, u32 iter_flags,
+				  void (*iterator)(void *data, u8 *mac,
+						   struct ieee80211_vif *vif),
+				  void *data);
+
+/**
  * ieee80211_iterate_active_interfaces - iterate active interfaces
  *
  * This function iterates over the interfaces associated with a given
@@ -4364,11 +4545,16 @@ enum ieee80211_interface_iteration_flags {
  * @iterator: the iterator function to call
  * @data: first argument of the iterator function
  */
-void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
-					 u32 iter_flags,
-					 void (*iterator)(void *data, u8 *mac,
-						struct ieee80211_vif *vif),
-					 void *data);
+static inline void
+ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw, u32 iter_flags,
+				    void (*iterator)(void *data, u8 *mac,
+						     struct ieee80211_vif *vif),
+				    void *data)
+{
+	ieee80211_iterate_interfaces(hw,
+				     iter_flags | IEEE80211_IFACE_ITER_ACTIVE,
+				     iterator, data);
+}
 
 /**
  * ieee80211_iterate_active_interfaces_atomic - iterate active interfaces
@@ -5194,30 +5380,13 @@ int ieee80211_reserve_tid(struct ieee80211_sta *sta, u8 tid);
 void ieee80211_unreserve_tid(struct ieee80211_sta *sta, u8 tid);
 
 /**
- * ieee80211_ie_split - split an IE buffer according to ordering
- *
- * @ies: the IE buffer
- * @ielen: the length of the IE buffer
- * @ids: an array with element IDs that are allowed before
- *	the split
- * @n_ids: the size of the element ID array
- * @offset: offset where to start splitting in the buffer
- *
- * This function splits an IE buffer by updating the @offset
- * variable to point to the location where the buffer should be
- * split.
+ * ieee80211_tx_dequeue - dequeue a packet from a software tx queue
  *
- * It assumes that the given IE buffer is well-formed, this
- * has to be guaranteed by the caller!
- *
- * It also assumes that the IEs in the buffer are ordered
- * correctly, if not the result of using this function will not
- * be ordered correctly either, i.e. it does no reordering.
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @txq: pointer obtained from station or virtual interface
  *
- * The function returns the offset where the next part of the
- * buffer starts, which may be @ielen if the entire (remainder)
- * of the buffer should be used.
+ * Returns the skb if successful, %NULL if no frame was available.
  */
-size_t ieee80211_ie_split(const u8 *ies, size_t ielen,
-			  const u8 *ids, int n_ids, size_t offset);
+struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
+				     struct ieee80211_txq *txq);
 #endif /* MAC80211_H */