diff options
| author | Stanislaw Gruszka <sgruszka@redhat.com> | 2012-12-03 12:56:33 +0100 |
|---|---|---|
| committer | Johannes Berg <johannes.berg@intel.com> | 2012-12-05 09:53:31 +0100 |
| commit | 5b632fe85ec82e5c43740b52e74c66df50a37db3 (patch) | |
| tree | fb69e1d709ca9a13ce049f27153670ef7bd2e0fb /include/net | |
| parent | mac80211: add debug file for mic failure (diff) | |
| download | linux-5b632fe85ec82e5c43740b52e74c66df50a37db3.tar.xz linux-5b632fe85ec82e5c43740b52e74c66df50a37db3.zip | |
mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL
Commit f0425beda4d404a6e751439b562100b902ba9c98 "mac80211: retry sending
failed BAR frames later instead of tearing down aggr" caused regression
on rt2x00 hardware (connection hangs). This regression was fixed by
commit be03d4a45c09ee5100d3aaaedd087f19bc20d01 "rt2x00: Don't let
mac80211 send a BAR when an AMPDU subframe fails". But the latter
commit caused yet another problem reported in
https://bugzilla.kernel.org/show_bug.cgi?id=42828#c22
After long discussion in this thread:
http://mid.gmane.org/20121018075615.GA18212@redhat.com
and testing various alternative solutions, which failed on one or other
setup, we have no other good fix for the issues like just revert both
mentioned earlier commits.
To do not affect other hardware which benefit from commit
f0425beda4d404a6e751439b562100b902ba9c98, instead of reverting it,
introduce flag that when used will restore mac80211 behaviour before
the commit.
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
[replaced link with mid.gmane.org that has message-id]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Diffstat (limited to 'include/net')
| -rw-r--r-- | include/net/mac80211.h | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 1c02fb3b3817..ee50c5eba50c 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1369,6 +1369,10 @@ struct ieee80211_tx_control { * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any * P2P Interface. This will be honoured even if more than one interface * is supported. + * + * @IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL: On this hardware TX BA session + * should be tear down once BAR frame will not be acked. + * */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1397,6 +1401,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24, IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, + IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL = 1<<26, }; /** |