Merge branch 'master' of /repos/git/net-next-2.6

Signed-off-by: Patrick McHardy <kaber@trash.net>

17 files changed, 263 insertions, 53 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index add79930f47d..a3f0a7ed31ac 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -39,8 +39,8 @@
  * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
  */
 enum ieee80211_band {
-	IEEE80211_BAND_2GHZ,
-	IEEE80211_BAND_5GHZ,
+	IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
+	IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
 
 	/* keep last */
 	IEEE80211_NUM_BANDS
@@ -626,8 +626,14 @@ enum cfg80211_signal_type {
  * @beacon_interval: the beacon interval as from the frame
  * @capability: the capability field in host byte order
  * @information_elements: the information elements (Note that there
- *	is no guarantee that these are well-formed!)
+ *	is no guarantee that these are well-formed!); this is a pointer to
+ *	either the beacon_ies or proberesp_ies depending on whether Probe
+ *	Response frame has been received
  * @len_information_elements: total length of the information elements
+ * @beacon_ies: the information elements from the last Beacon frame
+ * @len_beacon_ies: total length of the beacon_ies
+ * @proberesp_ies: the information elements from the last Probe Response frame
+ * @len_proberesp_ies: total length of the proberesp_ies
  * @signal: signal strength value (type depends on the wiphy's signal_type)
  * @free_priv: function pointer to free private data
  * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
@@ -641,6 +647,10 @@ struct cfg80211_bss {
 	u16 capability;
 	u8 *information_elements;
 	size_t len_information_elements;
+	u8 *beacon_ies;
+	size_t len_beacon_ies;
+	u8 *proberesp_ies;
+	size_t len_proberesp_ies;
 
 	s32 signal;
 
@@ -837,6 +847,7 @@ enum wiphy_params_flags {
 	WIPHY_PARAM_RETRY_LONG		= 1 << 1,
 	WIPHY_PARAM_FRAG_THRESHOLD	= 1 << 2,
 	WIPHY_PARAM_RTS_THRESHOLD	= 1 << 3,
+	WIPHY_PARAM_COVERAGE_CLASS	= 1 << 4,
 };
 
 /**
@@ -856,20 +867,11 @@ enum tx_power_setting {
  * cfg80211_bitrate_mask - masks for bitrate control
  */
 struct cfg80211_bitrate_mask {
-/*
- * As discussed in Berlin, this struct really
- * should look like this:
-
 	struct {
 		u32 legacy;
-		u8 mcs[IEEE80211_HT_MCS_MASK_LEN];
+		/* TODO: add support for masking MCS rates; e.g.: */
+		/* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */
 	} control[IEEE80211_NUM_BANDS];
-
- * Since we can always fix in-kernel users, let's keep
- * it simpler for now:
- */
-	u32 fixed;   /* fixed bitrate, 0 == not fixed */
-	u32 maxrate; /* in kbps, 0 == no limit */
 };
 /**
  * struct cfg80211_pmksa - PMK Security Association
@@ -1193,6 +1195,10 @@ enum wiphy_flags {
 	WIPHY_FLAG_4ADDR_STATION	= BIT(6),
 };
 
+struct mac_address {
+	u8 addr[ETH_ALEN];
+};
+
 /**
  * struct wiphy - wireless hardware description
  * @idx: the wiphy index assigned to this item
@@ -1211,12 +1217,28 @@ enum wiphy_flags {
  *	-1 = fragmentation disabled, only odd values >= 256 used
  * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
  * @net: the network namespace this wiphy currently lives in
+ * @perm_addr: permanent MAC address of this device
+ * @addr_mask: If the device supports multiple MAC addresses by masking,
+ *	set this to a mask with variable bits set to 1, e.g. if the last
+ *	four bits are variable then set it to 00:...:00:0f. The actual
+ *	variable bits shall be determined by the interfaces added, with
+ *	interfaces not matching the mask being rejected to be brought up.
+ * @n_addresses: number of addresses in @addresses.
+ * @addresses: If the device has more than one address, set this pointer
+ *	to a list of addresses (6 bytes each). The first one will be used
+ *	by default for perm_addr. In this case, the mask should be set to
+ *	all-zeroes. In this case it is assumed that the device can handle
+ *	the same number of arbitrary MAC addresses.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
 
-	/* permanent MAC address */
+	/* permanent MAC address(es) */
 	u8 perm_addr[ETH_ALEN];
+	u8 addr_mask[ETH_ALEN];
+
+	u16 n_addresses;
+	struct mac_address *addresses;
 
 	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
 	u16 interface_modes;
@@ -1236,6 +1258,7 @@ struct wiphy {
 	u8 retry_long;
 	u32 frag_threshold;
 	u32 rts_threshold;
+	u8 coverage_class;
 
 	char fw_version[ETHTOOL_BUSINFO_LEN];
 	u32 hw_version;
@@ -1635,6 +1658,22 @@ void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
  */
 unsigned int cfg80211_classify8021d(struct sk_buff *skb);
 
+/**
+ * cfg80211_find_ie - find information element in data
+ *
+ * @eid: element ID
+ * @ies: data consisting of IEs
+ * @len: length of data
+ *
+ * This function will return %NULL if the element ID could
+ * not be found or if the element is invalid (claims to be
+ * longer than the given data), or a pointer to the first byte
+ * of the requested element, that is the byte containing the
+ * element ID. There are no checks on the element length
+ * other than having to fit into the given data.
+ */
+const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
+
 /*
  * Regulatory helper functions for wiphys
  */
diff --git a/include/net/icmp.h b/include/net/icmp.h
index dfa72d4e8907..15b3dfe9fce8 100644
--- a/include/net/icmp.h
+++ b/include/net/icmp.h
@@ -28,7 +28,7 @@ struct icmp_err {
   unsigned	fatal:1;
 };
 
-extern struct icmp_err icmp_err_convert[];
+extern const struct icmp_err icmp_err_convert[];
 #define ICMP_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.icmp_statistics, field)
 #define ICMP_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.icmp_statistics, field)
 #define ICMPMSGOUT_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.icmpmsg_statistics, field+256)
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index bd4c53f75ac0..83fd34437cf1 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -122,10 +122,12 @@ struct inet_sock {
 	__be32			inet_saddr;
 	__s16			uc_ttl;
 	__u16			cmsg_flags;
-	struct ip_options	*opt;
 	__be16			inet_sport;
 	__u16			inet_id;
+
+	struct ip_options	*opt;
 	__u8			tos;
+	__u8			min_ttl;
 	__u8			mc_ttl;
 	__u8			pmtudisc;
 	__u8			recverr:1,
diff --git a/include/net/ip.h b/include/net/ip.h
index 85108cfbb1ae..fb63371c07a8 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -326,6 +326,22 @@ static __inline__ void inet_reset_saddr(struct sock *sk)
 
 #endif
 
+static inline int sk_mc_loop(struct sock *sk)
+{
+	if (!sk)
+		return 1;
+	switch (sk->sk_family) {
+	case AF_INET:
+		return inet_sk(sk)->mc_loop;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+	case AF_INET6:
+		return inet6_sk(sk)->mc_loop;
+#endif
+	}
+	WARN_ON(1);
+	return 1;
+}
+
 extern int	ip_call_ra_chain(struct sk_buff *skb);
 
 /*
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index f073a2a50574..74ccf30fdf8e 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -107,12 +107,14 @@ enum ieee80211_max_queues {
  *	2^n-1 in the range 1..32767]
  * @cw_max: maximum contention window [like @cw_min]
  * @txop: maximum burst time in units of 32 usecs, 0 meaning disabled
+ * @uapsd: is U-APSD mode enabled for the queue
  */
 struct ieee80211_tx_queue_params {
 	u16 txop;
 	u16 cw_min;
 	u16 cw_max;
 	u8 aifs;
+	bool uapsd;
 };
 
 /**
@@ -184,7 +186,8 @@ enum ieee80211_bss_change {
  * @use_short_slot: use short slot time (only relevant for ERP);
  *	if the hardware cannot handle this it must set the
  *	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
- * @dtim_period: num of beacons before the next DTIM, for PSM
+ * @dtim_period: num of beacons before the next DTIM, for beaconing,
+ *	not valid in station mode (cf. hw conf ps_dtim_period)
  * @timestamp: beacon timestamp
  * @beacon_int: beacon interval
  * @assoc_capability: capabilities taken from assoc resp
@@ -255,9 +258,6 @@ struct ieee80211_bss_conf {
  * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be
  *	set by rate control algorithms to indicate probe rate, will
  *	be cleared for fragmented frames (except on the last fragment)
- * @IEEE80211_TX_INTFL_RCALGO: mac80211 internal flag, do not test or
- *	set this flag in the driver; indicates that the rate control
- *	algorithm was used and should be notified of TX status
  * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211,
  *	used to indicate that a pending frame requires TX processing before
  *	it can be sent out.
@@ -272,6 +272,11 @@ struct ieee80211_bss_conf {
  *	transmit function after the current frame, this can be used
  *	by drivers to kick the DMA queue only if unset or when the
  *	queue gets full.
+ * @IEEE80211_TX_INTFL_RETRANSMISSION: This frame is being retransmitted
+ *	after TX status because the destination was asleep, it must not
+ *	be modified again (no seqno assignment, crypto, etc.)
+ * @IEEE80211_TX_INTFL_HAS_RADIOTAP: This frame was injected and still
+ *	has a radiotap header at skb->data.
  */
 enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTL_REQ_TX_STATUS		= BIT(0),
@@ -287,12 +292,13 @@ enum mac80211_tx_control_flags {
 	IEEE80211_TX_STAT_AMPDU			= BIT(10),
 	IEEE80211_TX_STAT_AMPDU_NO_BACK		= BIT(11),
 	IEEE80211_TX_CTL_RATE_CTRL_PROBE	= BIT(12),
-	IEEE80211_TX_INTFL_RCALGO		= BIT(13),
 	IEEE80211_TX_INTFL_NEED_TXPROCESSING	= BIT(14),
 	IEEE80211_TX_INTFL_RETRIED		= BIT(15),
 	IEEE80211_TX_INTFL_DONT_ENCRYPT		= BIT(16),
 	IEEE80211_TX_CTL_PSPOLL_RESPONSE	= BIT(17),
 	IEEE80211_TX_CTL_MORE_FRAMES		= BIT(18),
+	IEEE80211_TX_INTFL_RETRANSMISSION	= BIT(19),
+	IEEE80211_TX_INTFL_HAS_RADIOTAP		= BIT(20),
 };
 
 /**
@@ -571,7 +577,13 @@ struct ieee80211_rx_status {
  * @IEEE80211_CONF_MONITOR: there's a monitor interface present -- use this
  *	to determine for example whether to calculate timestamps for packets
  *	or not, do not use instead of filter flags!
- * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only)
+ * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only).
+ *	This is the power save mode defined by IEEE 802.11-2007 section 11.2,
+ *	meaning that the hardware still wakes up for beacons, is able to
+ *	transmit frames and receive the possible acknowledgment frames.
+ *	Not to be confused with hardware specific wakeup/sleep states,
+ *	driver is responsible for that. See the section "Powersave support"
+ *	for more.
  * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set
  *	the driver should be prepared to handle configuration requests but
  *	may turn the device off as much as possible. Typically, this flag will
@@ -611,7 +623,11 @@ enum ieee80211_conf_changed {
 /**
  * enum ieee80211_smps_mode - spatial multiplexing power save mode
  *
- * @
+ * @IEEE80211_SMPS_AUTOMATIC: automatic
+ * @IEEE80211_SMPS_OFF: off
+ * @IEEE80211_SMPS_STATIC: static
+ * @IEEE80211_SMPS_DYNAMIC: dynamic
+ * @IEEE80211_SMPS_NUM_MODES: internal, don't use
  */
 enum ieee80211_smps_mode {
 	IEEE80211_SMPS_AUTOMATIC,
@@ -636,6 +652,9 @@ enum ieee80211_smps_mode {
  *	value will be only achievable between DTIM frames, the hardware
  *	needs to check for the multicast traffic bit in DTIM beacons.
  *	This variable is valid only when the CONF_PS flag is set.
+ * @ps_dtim_period: The DTIM period of the AP we're connected to, for use
+ *	in power saving. Power saving will not be enabled until a beacon
+ *	has been received and the DTIM period is known.
  * @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the
  *	powersave documentation below. This variable is valid only when
  *	the CONF_PS flag is set.
@@ -662,6 +681,7 @@ struct ieee80211_conf {
 	int max_sleep_period;
 
 	u16 listen_interval;
+	u8 ps_dtim_period;
 
 	u8 long_frame_max_tx_count, short_frame_max_tx_count;
 
@@ -933,6 +953,11 @@ enum ieee80211_tkip_key_type {
  *	Hardware supports dynamic spatial multiplexing powersave,
  *	ie. can turn off all but one chain and then wake the rest
  *	up as required after, for example, rts/cts handshake.
+ *
+ * @IEEE80211_HW_SUPPORTS_UAPSD:
+ *	Hardware supports Unscheduled Automatic Power Save Delivery
+ *	(U-APSD) in managed mode. The mode is configured with
+ *	conf_tx() operation.
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
@@ -952,6 +977,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_BEACON_FILTER			= 1<<14,
 	IEEE80211_HW_SUPPORTS_STATIC_SMPS		= 1<<15,
 	IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS		= 1<<16,
+	IEEE80211_HW_SUPPORTS_UAPSD			= 1<<17,
 };
 
 /**
@@ -1130,18 +1156,24 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  *
  * mac80211 has support for various powersave implementations.
  *
- * First, it can support hardware that handles all powersaving by
- * itself, such hardware should simply set the %IEEE80211_HW_SUPPORTS_PS
- * hardware flag. In that case, it will be told about the desired
- * powersave mode depending on the association status, and the driver
- * must take care of sending nullfunc frames when necessary, i.e. when
- * entering and leaving powersave mode. The driver is required to look at
- * the AID in beacons and signal to the AP that it woke up when it finds
- * traffic directed to it. This mode supports dynamic PS by simply
- * enabling/disabling PS.
- *
- * Additionally, such hardware may set the %IEEE80211_HW_SUPPORTS_DYNAMIC_PS
- * flag to indicate that it can support dynamic PS mode itself (see below).
+ * First, it can support hardware that handles all powersaving by itself,
+ * such hardware should simply set the %IEEE80211_HW_SUPPORTS_PS hardware
+ * flag. In that case, it will be told about the desired powersave mode
+ * with the %IEEE80211_CONF_PS flag depending on the association status.
+ * The hardware must take care of sending nullfunc frames when necessary,
+ * i.e. when entering and leaving powersave mode. The hardware is required
+ * to look at the AID in beacons and signal to the AP that it woke up when
+ * it finds traffic directed to it.
+ *
+ * %IEEE80211_CONF_PS flag enabled means that the powersave mode defined in
+ * IEEE 802.11-2007 section 11.2 is enabled. This is not to be confused
+ * with hardware wakeup and sleep states. Driver is responsible for waking
+ * up the hardware before issueing commands to the hardware and putting it
+ * back to sleep at approriate times.
+ *
+ * When PS is enabled, hardware needs to wakeup for beacons and receive the
+ * buffered multicast/broadcast frames after the beacon. Also it must be
+ * possible to send frames and receive the acknowledment frame.
  *
  * Other hardware designs cannot send nullfunc frames by themselves and also
  * need software support for parsing the TIM bitmap. This is also supported
@@ -1149,14 +1181,35 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still
  * required to pass up beacons. The hardware is still required to handle
  * waking up for multicast traffic; if it cannot the driver must handle that
- * as best as it can, mac80211 is too slow.
- *
- * Dynamic powersave mode is an extension to normal powersave mode in which
- * the hardware stays awake for a user-specified period of time after sending
- * a frame so that reply frames need not be buffered and therefore delayed
- * to the next wakeup. This can either be supported by hardware, in which case
- * the driver needs to look at the @dynamic_ps_timeout hardware configuration
- * value, or by the stack if all nullfunc handling is in the stack.
+ * as best as it can, mac80211 is too slow to do that.
+ *
+ * Dynamic powersave is an extension to normal powersave in which the
+ * hardware stays awake for a user-specified period of time after sending a
+ * frame so that reply frames need not be buffered and therefore delayed to
+ * the next wakeup. It's compromise of getting good enough latency when
+ * there's data traffic and still saving significantly power in idle
+ * periods.
+ *
+ * Dynamic powersave is supported by simply mac80211 enabling and disabling
+ * PS based on traffic. Driver needs to only set %IEEE80211_HW_SUPPORTS_PS
+ * flag and mac80211 will handle everything automatically. Additionally,
+ * hardware having support for the dynamic PS feature may set the
+ * %IEEE80211_HW_SUPPORTS_DYNAMIC_PS flag to indicate that it can support
+ * dynamic PS mode itself. The driver needs to look at the
+ * @dynamic_ps_timeout hardware configuration value and use it that value
+ * whenever %IEEE80211_CONF_PS is set. In this case mac80211 will disable
+ * dynamic PS feature in stack and will just keep %IEEE80211_CONF_PS
+ * enabled whenever user has enabled powersave.
+ *
+ * Driver informs U-APSD client support by enabling
+ * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the
+ * uapsd paramater in conf_tx() operation. Hardware needs to send the QoS
+ * Nullfunc frames and stay awake until the service period has ended. To
+ * utilize U-APSD, dynamic powersave is disabled for voip AC and all frames
+ * from that AC are transmitted with powersave enabled.
+ *
+ * Note: U-APSD client mode is not yet supported with
+ * %IEEE80211_HW_PS_NULLFUNC_STACK.
  */
 
 /**
@@ -1444,7 +1497,7 @@ enum ieee80211_ampdu_mlme_action {
  * @update_tkip_key: See the section "Hardware crypto acceleration"
  * 	This callback will be called in the context of Rx. Called for drivers
  * 	which set IEEE80211_KEY_FLAG_TKIP_REQ_RX_P1_KEY.
- *	The callback can sleep.
+ *	The callback must be atomic.
  *
  * @hw_scan: Ask the hardware to service the scan request, no need to start
  *	the scan state machine in stack. The scan must honour the channel
@@ -1533,6 +1586,10 @@ enum ieee80211_ampdu_mlme_action {
  *	and need to call wiphy_rfkill_set_hw_state() in the callback.
  *	The callback can sleep.
  *
+ * @set_coverage_class: Set slot time for given coverage class as specified
+ *	in IEEE 802.11-2007 section 17.3.8.6 and modify ACK timeout
+ *	accordingly. This callback is not required and may sleep.
+ *
  * @testmode_cmd: Implement a cfg80211 test mode command.
  *	The callback can sleep.
  *
@@ -1565,8 +1622,10 @@ struct ieee80211_ops {
 		       struct ieee80211_vif *vif, struct ieee80211_sta *sta,
 		       struct ieee80211_key_conf *key);
 	void (*update_tkip_key)(struct ieee80211_hw *hw,
-			struct ieee80211_key_conf *conf, const u8 *address,
-			u32 iv32, u16 *phase1key);
+				struct ieee80211_vif *vif,
+				struct ieee80211_key_conf *conf,
+				struct ieee80211_sta *sta,
+				u32 iv32, u16 *phase1key);
 	int (*hw_scan)(struct ieee80211_hw *hw,
 		       struct cfg80211_scan_request *req);
 	void (*sw_scan_start)(struct ieee80211_hw *hw);
@@ -1592,6 +1651,7 @@ struct ieee80211_ops {
 			    struct ieee80211_sta *sta, u16 tid, u16 *ssn);
 
 	void (*rfkill_poll)(struct ieee80211_hw *hw);
+	void (*set_coverage_class)(struct ieee80211_hw *hw, u8 coverage_class);
 #ifdef CONFIG_NL80211_TESTMODE
 	int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len);
 #endif
@@ -1874,6 +1934,53 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 }
 
 /**
+ * ieee80211_pspoll_get - retrieve a PS Poll template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a PS Poll a template which can, for example, uploaded to
+ * hardware. The template must be updated after association so that correct
+ * AID, BSSID and MAC address is used.
+ *
+ * Note: Caller (or hardware) is responsible for setting the
+ * &IEEE80211_FCTL_PM bit.
+ */
+struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_nullfunc_get - retrieve a nullfunc template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a Nullfunc template which can, for example, uploaded to
+ * hardware. The template must be updated after association so that correct
+ * BSSID and address is used.
+ *
+ * Note: Caller (or hardware) is responsible for setting the
+ * &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields.
+ */
+struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_probereq_get - retrieve a Probe Request template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @ssid: SSID buffer
+ * @ssid_len: length of SSID
+ * @ie: buffer containing all IEs except SSID for the template
+ * @ie_len: length of the IE buffer
+ *
+ * Creates a Probe Request template which can, for example, be uploaded to
+ * hardware.
+ */
+struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif,
+				       const u8 *ssid, size_t ssid_len,
+				       const u8 *ie, size_t ie_len);
+
+/**
  * ieee80211_rts_get - RTS frame generation function
  * @hw: pointer obtained from ieee80211_alloc_hw().
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
@@ -2292,8 +2399,12 @@ enum rate_control_changed {
  * @short_preamble: whether mac80211 will request short-preamble transmission
  *	if the selected rate supports it
  * @max_rate_idx: user-requested maximum rate (not MCS for now)
+ *	(deprecated; this will be removed once drivers get updated to use
+ *	rate_idx_mask)
+ * @rate_idx_mask: user-requested rate mask (not MCS for now)
  * @skb: the skb that will be transmitted, the control information in it needs
  *	to be filled in
+ * @ap: whether this frame is sent out in AP mode
  */
 struct ieee80211_tx_rate_control {
 	struct ieee80211_hw *hw;
@@ -2303,6 +2414,8 @@ struct ieee80211_tx_rate_control {
 	struct ieee80211_tx_rate reported_rate;
 	bool rts, short_preamble;
 	u8 max_rate_idx;
+	u32 rate_idx_mask;
+	bool ap;
 };
 
 struct rate_control_ops {
diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h
index ba1ba0c5efd1..63d449807d9b 100644
--- a/include/net/netns/conntrack.h
+++ b/include/net/netns/conntrack.h
@@ -11,6 +11,8 @@ struct nf_conntrack_ecache;
 struct netns_ct {
 	atomic_t		count;
 	unsigned int		expect_count;
+	unsigned int		htable_size;
+	struct kmem_cache	*nf_conntrack_cachep;
 	struct hlist_nulls_head	*hash;
 	struct hlist_head	*expect_hash;
 	struct hlist_nulls_head	unconfirmed;
@@ -28,5 +30,6 @@ struct netns_ct {
 #endif
 	int			hash_vmalloc;
 	int			expect_vmalloc;
+	char			*slabname;
 };
 #endif
diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h
index 8098f6b8319d..2764994c9136 100644
--- a/include/net/netns/ipv4.h
+++ b/include/net/netns/ipv4.h
@@ -42,6 +42,7 @@ struct netns_ipv4 {
 #endif
 	struct xt_table		*nat_table;
 	struct hlist_head	*nat_bysource;
+	unsigned int		nat_htable_size;
 	int			nat_vmalloced;
 #endif
 
diff --git a/include/net/netns/xfrm.h b/include/net/netns/xfrm.h
index 56f8e5585df7..74f119a2829a 100644
--- a/include/net/netns/xfrm.h
+++ b/include/net/netns/xfrm.h
@@ -5,6 +5,7 @@
 #include <linux/wait.h>
 #include <linux/workqueue.h>
 #include <linux/xfrm.h>
+#include <net/dst_ops.h>
 
 struct ctl_table_header;
 
@@ -42,6 +43,11 @@ struct netns_xfrm {
 	unsigned int		policy_count[XFRM_POLICY_MAX * 2];
 	struct work_struct	policy_hash_work;
 
+	struct dst_ops		xfrm4_dst_ops;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+	struct dst_ops		xfrm6_dst_ops;
+#endif
+
 	struct sock		*nlsk;
 	struct sock		*nlsk_stash;
 
diff --git a/include/net/netrom.h b/include/net/netrom.h
index 15696b1fd30f..ab170a60e7d3 100644
--- a/include/net/netrom.h
+++ b/include/net/netrom.h
@@ -132,6 +132,8 @@ static __inline__ void nr_node_put(struct nr_node *nr_node)
 static __inline__ void nr_neigh_put(struct nr_neigh *nr_neigh)
 {
 	if (atomic_dec_and_test(&nr_neigh->refcount)) {
+		if (nr_neigh->ax25)
+			ax25_cb_put(nr_neigh->ax25);
 		kfree(nr_neigh->digipeat);
 		kfree(nr_neigh);
 	}
diff --git a/include/net/phonet/pep.h b/include/net/phonet/pep.h
index 4c61cdce4e5f..35672b1cf44a 100644
--- a/include/net/phonet/pep.h
+++ b/include/net/phonet/pep.h
@@ -44,6 +44,7 @@ struct pep_sock {
 	u8			rx_fc;	/* RX flow control */
 	u8			tx_fc;	/* TX flow control */
 	u8			init_enable;	/* auto-enable at creation */
+	u8			aligned;
 };
 
 static inline struct pep_sock *pep_sk(struct sock *sk)
@@ -77,6 +78,7 @@ static inline struct pnpipehdr *pnp_hdr(struct sk_buff *skb)
 
 enum {
 	PNS_PIPE_DATA = 0x20,
+	PNS_PIPE_ALIGNED_DATA,
 
 	PNS_PEP_CONNECT_REQ = 0x40,
 	PNS_PEP_CONNECT_RESP,
@@ -138,6 +140,7 @@ enum {
 	PN_PIPE_SB_NEGOTIATED_FC,
 	PN_PIPE_SB_REQUIRED_FC_TX,
 	PN_PIPE_SB_PREFERRED_FC_RX,
+	PN_PIPE_SB_ALIGNED_DATA,
 };
 
 /* Phonet pipe flow control models */
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index 2d567265363e..b6cdc33b39c1 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -71,6 +71,7 @@ extern void qdisc_watchdog_cancel(struct qdisc_watchdog *wd);
 
 extern struct Qdisc_ops pfifo_qdisc_ops;
 extern struct Qdisc_ops bfifo_qdisc_ops;
+extern struct Qdisc_ops pfifo_head_drop_qdisc_ops;
 
 extern int fifo_set_limit(struct Qdisc *q, unsigned int limit);
 extern struct Qdisc *fifo_create_dflt(struct Qdisc *sch, struct Qdisc_ops *ops,
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index 47995b81c5d7..f873ee37f7e4 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -39,6 +39,7 @@ enum environment_cap {
  * 	00 - World regulatory domain
  * 	99 - built by driver but a specific alpha2 cannot be determined
  * 	98 - result of an intersection between two regulatory domains
+ *	97 - regulatory domain has not yet been configured
  * @intersect: indicates whether the wireless core should intersect
  * 	the requested regulatory domain with the presently set regulatory
  * 	domain.
diff --git a/include/net/request_sock.h b/include/net/request_sock.h
index c9b50ebd9ce9..99e6e19b57c2 100644
--- a/include/net/request_sock.h
+++ b/include/net/request_sock.h
@@ -45,6 +45,8 @@ struct request_sock_ops {
 	void		(*send_reset)(struct sock *sk,
 				      struct sk_buff *skb);
 	void		(*destructor)(struct request_sock *req);
+	void		(*syn_ack_timeout)(struct sock *sk,
+					   struct request_sock *req);
 };
 
 /* struct request_sock - mini sock to represent a connection request
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index dad558bc06fa..67dc08eaaa45 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -427,6 +427,25 @@ static inline struct sk_buff *qdisc_dequeue_head(struct Qdisc *sch)
 	return __qdisc_dequeue_head(sch, &sch->q);
 }
 
+static inline unsigned int __qdisc_queue_drop_head(struct Qdisc *sch,
+					      struct sk_buff_head *list)
+{
+	struct sk_buff *skb = __qdisc_dequeue_head(sch, list);
+
+	if (likely(skb != NULL)) {
+		unsigned int len = qdisc_pkt_len(skb);
+		kfree_skb(skb);
+		return len;
+	}
+
+	return 0;
+}
+
+static inline unsigned int qdisc_queue_drop_head(struct Qdisc *sch)
+{
+	return __qdisc_queue_drop_head(sch, &sch->q);
+}
+
 static inline struct sk_buff *__qdisc_dequeue_tail(struct Qdisc *sch,
 						   struct sk_buff_head *list)
 {
diff --git a/include/net/snmp.h b/include/net/snmp.h
index f0d756f2ac99..da02ee027d69 100644
--- a/include/net/snmp.h
+++ b/include/net/snmp.h
@@ -32,7 +32,7 @@
  *  - name of entries.
  */
 struct snmp_mib {
-	char *name;
+	const char *name;
 	int entry;
 };
 
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 788c99f98597..87d164b9bd8f 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -400,6 +400,8 @@ extern int			compat_tcp_setsockopt(struct sock *sk,
 					int level, int optname,
 					char __user *optval, unsigned int optlen);
 extern void			tcp_set_keepalive(struct sock *sk, int val);
+extern void			tcp_syn_ack_timeout(struct sock *sk,
+						    struct request_sock *req);
 extern int			tcp_recvmsg(struct kiocb *iocb, struct sock *sk,
 					    struct msghdr *msg,
 					    size_t len, int nonblock, 
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 6d85861ab990..fcee547ca7e3 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1367,8 +1367,8 @@ struct xfrmk_spdinfo {
 extern struct xfrm_state *xfrm_find_acq_byseq(struct net *net, u32 seq);
 extern int xfrm_state_delete(struct xfrm_state *x);
 extern int xfrm_state_flush(struct net *net, u8 proto, struct xfrm_audit *audit_info);
-extern void xfrm_sad_getinfo(struct xfrmk_sadinfo *si);
-extern void xfrm_spd_getinfo(struct xfrmk_spdinfo *si);
+extern void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si);
+extern void xfrm_spd_getinfo(struct net *net, struct xfrmk_spdinfo *si);
 extern int xfrm_replay_check(struct xfrm_state *x,
 			     struct sk_buff *skb, __be32 seq);
 extern void xfrm_replay_advance(struct xfrm_state *x, __be32 seq);
@@ -1408,9 +1408,9 @@ extern int xfrm6_input_addr(struct sk_buff *skb, xfrm_address_t *daddr,
 			    xfrm_address_t *saddr, u8 proto);
 extern int xfrm6_tunnel_register(struct xfrm6_tunnel *handler, unsigned short family);
 extern int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler, unsigned short family);
-extern __be32 xfrm6_tunnel_alloc_spi(xfrm_address_t *saddr);
-extern void xfrm6_tunnel_free_spi(xfrm_address_t *saddr);
-extern __be32 xfrm6_tunnel_spi_lookup(xfrm_address_t *saddr);
+extern __be32 xfrm6_tunnel_alloc_spi(struct net *net, xfrm_address_t *saddr);
+extern void xfrm6_tunnel_free_spi(struct net *net, xfrm_address_t *saddr);
+extern __be32 xfrm6_tunnel_spi_lookup(struct net *net, xfrm_address_t *saddr);
 extern int xfrm6_extract_output(struct xfrm_state *x, struct sk_buff *skb);
 extern int xfrm6_prepare_output(struct xfrm_state *x, struct sk_buff *skb);
 extern int xfrm6_output(struct sk_buff *skb);