[SCSI] aic94xx: new driver

This is the end point of the separate aic94xx driver based on the
original driver and transport class from Luben Tuikov
<ltuikov@yahoo.com>

The log of the separate development is:

Alexis Bruemmer:
  o aic94xx: fix hotplug/unplug for expanderless systems
  o aic94xx: disable split completion timer/setting by default
  o aic94xx: wide port off expander support
  o aic94xx: remove various inline functions
  o aic94xx: use bitops
  o aic94xx: remove queue comment
  o aic94xx: remove sas_common.c
  o aic94xx: sas remove depot's
  o aic94xx: use available list_for_each_entry_safe_reverse()
  o aic94xx: sas header file merge

James Bottomley:
  o aic94xx: fix TF_TMF_NO_CTX processing
  o aic94xx: convert to request_firmware interface
  o aic94xx: fix hotplug/unplug
  o aic94xx: add link error counts to the expander phys
  o aic94xx: add transport class phy reset capability
  o aic94xx: remove local_attached flag
  o Remove README
  o Fixup Makefile variable for libsas rename
  o Rename sas->libsas
  o aic94xx: correct return code for sas_discover_event
  o aic94xx: use parent backlink port
  o aic94xx: remove channel abstraction
  o aic94xx: fix routing algorithms
  o aic94xx: add backlink port
  o aic94xx: fix cascaded expander properties
  o aic94xx: fix sleep under lock
  o aic94xx: fix panic on module removal in complex topology
  o aic94xx: make use of the new sas_port
  o rename sas_port to asd_sas_port
  o Fix for eh_strategy_handler move
  o aic94xx: move entirely over to correct transport class formulation
  o remove last vestages of sas_rphy_alloc()
  o update for eh_timed_out move
  o Preliminary expander support for aic94xx
  o sas: remove event thread
  o minor warning cleanups
  o remove last vestiges of id mapping arrays
  o Further updates
  o Convert aic94xx over entirely to the transport class end device and
  o update aic94xx/sas to use the new sas transport class end device
  o [PATCH] aic94xx: attaching to the sas transport class
  o Add missing completion removal from prior patch
  o [PATCH] aic94xx: attaching to the sas transport class
  o Build fixes from akpm

Jeff Garzik:
  o [scsi aic94xx] Remove ->owner from PCI info table

Luben Tuikov:
  o initial aic94xx driver

Mike Anderson:
  o aic94xx: fix panic on module insertion
  o aic94xx: stub out SATA_DEV case
  o aic94xx: compile warning cleanups
  o aic94xx: sas_alloc_task
  o aic94xx: ref count update
  o aic94xx nexus loss time value
  o [PATCH] aic94xx: driver assertion in non-x86 BIOS env

Randy Dunlap:
  o libsas: externs not needed

Robert Tarte:
  o aic94xx: sequence patch - fixes SATA support

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 644 insertions, 0 deletions

diff --git a/include/scsi/sas.h b/include/scsi/sas.h
new file mode 100644
index 000000000000..752853a113dc
--- /dev/null
+++ b/include/scsi/sas.h
@@ -0,0 +1,644 @@
+/*
+ * SAS structures and definitions header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_H_
+#define _SAS_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define SAS_ADDR_SIZE        8
+#define HASHED_SAS_ADDR_SIZE 3
+#define SAS_ADDR(_sa) ((unsigned long long) be64_to_cpu(*(__be64 *)(_sa)))
+
+#define SMP_REQUEST             0x40
+#define SMP_RESPONSE            0x41
+
+#define SSP_DATA                0x01
+#define SSP_XFER_RDY            0x05
+#define SSP_COMMAND             0x06
+#define SSP_RESPONSE            0x07
+#define SSP_TASK                0x16
+
+#define SMP_REPORT_GENERAL       0x00
+#define SMP_REPORT_MANUF_INFO    0x01
+#define SMP_READ_GPIO_REG        0x02
+#define SMP_DISCOVER             0x10
+#define SMP_REPORT_PHY_ERR_LOG   0x11
+#define SMP_REPORT_PHY_SATA      0x12
+#define SMP_REPORT_ROUTE_INFO    0x13
+#define SMP_WRITE_GPIO_REG       0x82
+#define SMP_CONF_ROUTE_INFO      0x90
+#define SMP_PHY_CONTROL          0x91
+#define SMP_PHY_TEST_FUNCTION    0x92
+
+#define SMP_RESP_FUNC_ACC        0x00
+#define SMP_RESP_FUNC_UNK        0x01
+#define SMP_RESP_FUNC_FAILED     0x02
+#define SMP_RESP_INV_FRM_LEN     0x03
+#define SMP_RESP_NO_PHY          0x10
+#define SMP_RESP_NO_INDEX        0x11
+#define SMP_RESP_PHY_NO_SATA     0x12
+#define SMP_RESP_PHY_UNK_OP      0x13
+#define SMP_RESP_PHY_UNK_TESTF   0x14
+#define SMP_RESP_PHY_TEST_INPROG 0x15
+#define SMP_RESP_PHY_VACANT      0x16
+
+/* SAM TMFs */
+#define TMF_ABORT_TASK      0x01
+#define TMF_ABORT_TASK_SET  0x02
+#define TMF_CLEAR_TASK_SET  0x04
+#define TMF_LU_RESET        0x08
+#define TMF_CLEAR_ACA       0x40
+#define TMF_QUERY_TASK      0x80
+
+/* SAS TMF responses */
+#define TMF_RESP_FUNC_COMPLETE   0x00
+#define TMF_RESP_INVALID_FRAME   0x02
+#define TMF_RESP_FUNC_ESUPP      0x04
+#define TMF_RESP_FUNC_FAILED     0x05
+#define TMF_RESP_FUNC_SUCC       0x08
+#define TMF_RESP_NO_LUN          0x09
+#define TMF_RESP_OVERLAPPED_TAG  0x0A
+
+enum sas_oob_mode {
+	OOB_NOT_CONNECTED,
+	SATA_OOB_MODE,
+	SAS_OOB_MODE
+};
+
+/* See sas_discover.c if you plan on changing these.
+ */
+enum sas_dev_type {
+	NO_DEVICE   = 0,	  /* protocol */
+	SAS_END_DEV = 1,	  /* protocol */
+	EDGE_DEV    = 2,	  /* protocol */
+	FANOUT_DEV  = 3,	  /* protocol */
+	SAS_HA      = 4,
+	SATA_DEV    = 5,
+	SATA_PM     = 7,
+	SATA_PM_PORT= 8,
+};
+
+enum sas_phy_linkrate {
+	PHY_LINKRATE_NONE = 0,
+	PHY_LINKRATE_UNKNOWN = 0,
+	PHY_DISABLED,
+	PHY_RESET_PROBLEM,
+	PHY_SPINUP_HOLD,
+	PHY_PORT_SELECTOR,
+	PHY_LINKRATE_1_5 = 0x08,
+	PHY_LINKRATE_G1  = PHY_LINKRATE_1_5,
+	PHY_LINKRATE_3   = 0x09,
+	PHY_LINKRATE_G2  = PHY_LINKRATE_3,
+	PHY_LINKRATE_6   = 0x0A,
+};
+
+/* Partly from IDENTIFY address frame. */
+enum sas_proto {
+	SATA_PROTO    = 1,
+	SAS_PROTO_SMP = 2,	  /* protocol */
+	SAS_PROTO_STP = 4,	  /* protocol */
+	SAS_PROTO_SSP = 8,	  /* protocol */
+	SAS_PROTO_ALL = 0xE,
+};
+
+/* From the spec; local phys only */
+enum phy_func {
+	PHY_FUNC_NOP,
+	PHY_FUNC_LINK_RESET,		  /* Enables the phy */
+	PHY_FUNC_HARD_RESET,
+	PHY_FUNC_DISABLE,
+	PHY_FUNC_CLEAR_ERROR_LOG = 5,
+	PHY_FUNC_CLEAR_AFFIL,
+	PHY_FUNC_TX_SATA_PS_SIGNAL,
+	PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
+};
+
+/* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
+ * Most of those are here for completeness.
+ */
+enum sas_prim {
+	SAS_PRIM_AIP_NORMAL = 1,
+	SAS_PRIM_AIP_R0     = 2,
+	SAS_PRIM_AIP_R1     = 3,
+	SAS_PRIM_AIP_R2     = 4,
+	SAS_PRIM_AIP_WC     = 5,
+	SAS_PRIM_AIP_WD     = 6,
+	SAS_PRIM_AIP_WP     = 7,
+	SAS_PRIM_AIP_RWP    = 8,
+
+	SAS_PRIM_BC_CH      = 9,
+	SAS_PRIM_BC_RCH0    = 10,
+	SAS_PRIM_BC_RCH1    = 11,
+	SAS_PRIM_BC_R0      = 12,
+	SAS_PRIM_BC_R1      = 13,
+	SAS_PRIM_BC_R2      = 14,
+	SAS_PRIM_BC_R3      = 15,
+	SAS_PRIM_BC_R4      = 16,
+
+	SAS_PRIM_NOTIFY_ENSP= 17,
+	SAS_PRIM_NOTIFY_R0  = 18,
+	SAS_PRIM_NOTIFY_R1  = 19,
+	SAS_PRIM_NOTIFY_R2  = 20,
+
+	SAS_PRIM_CLOSE_CLAF = 21,
+	SAS_PRIM_CLOSE_NORM = 22,
+	SAS_PRIM_CLOSE_R0   = 23,
+	SAS_PRIM_CLOSE_R1   = 24,
+
+	SAS_PRIM_OPEN_RTRY  = 25,
+	SAS_PRIM_OPEN_RJCT  = 26,
+	SAS_PRIM_OPEN_ACPT  = 27,
+
+	SAS_PRIM_DONE       = 28,
+	SAS_PRIM_BREAK      = 29,
+
+	SATA_PRIM_DMAT      = 33,
+	SATA_PRIM_PMNAK     = 34,
+	SATA_PRIM_PMACK     = 35,
+	SATA_PRIM_PMREQ_S   = 36,
+	SATA_PRIM_PMREQ_P   = 37,
+	SATA_SATA_R_ERR     = 38,
+};
+
+enum sas_open_rej_reason {
+	/* Abandon open */
+	SAS_OREJ_UNKNOWN   = 0,
+	SAS_OREJ_BAD_DEST  = 1,
+	SAS_OREJ_CONN_RATE = 2,
+	SAS_OREJ_EPROTO    = 3,
+	SAS_OREJ_RESV_AB0  = 4,
+	SAS_OREJ_RESV_AB1  = 5,
+	SAS_OREJ_RESV_AB2  = 6,
+	SAS_OREJ_RESV_AB3  = 7,
+	SAS_OREJ_WRONG_DEST= 8,
+	SAS_OREJ_STP_NORES = 9,
+
+	/* Retry open */
+	SAS_OREJ_NO_DEST   = 10,
+	SAS_OREJ_PATH_BLOCKED = 11,
+	SAS_OREJ_RSVD_CONT0 = 12,
+	SAS_OREJ_RSVD_CONT1 = 13,
+	SAS_OREJ_RSVD_INIT0 = 14,
+	SAS_OREJ_RSVD_INIT1 = 15,
+	SAS_OREJ_RSVD_STOP0 = 16,
+	SAS_OREJ_RSVD_STOP1 = 17,
+	SAS_OREJ_RSVD_RETRY = 18,
+};
+
+struct  dev_to_host_fis {
+	u8     fis_type;	  /* 0x34 */
+	u8     flags;
+	u8     status;
+	u8     error;
+
+	u8     lbal;
+	union { u8 lbam; u8 byte_count_low; };
+	union { u8 lbah; u8 byte_count_high; };
+	u8     device;
+
+	u8     lbal_exp;
+	u8     lbam_exp;
+	u8     lbah_exp;
+	u8     _r_a;
+
+	union { u8  sector_count; u8 interrupt_reason; };
+	u8     sector_count_exp;
+	u8     _r_b;
+	u8     _r_c;
+
+	u32    _r_d;
+} __attribute__ ((packed));
+
+struct host_to_dev_fis {
+	u8     fis_type;	  /* 0x27 */
+	u8     flags;
+	u8     command;
+	u8     features;
+
+	u8     lbal;
+	union { u8 lbam; u8 byte_count_low; };
+	union { u8 lbah; u8 byte_count_high; };
+	u8     device;
+
+	u8     lbal_exp;
+	u8     lbam_exp;
+	u8     lbah_exp;
+	u8     features_exp;
+
+	union { u8  sector_count; u8 interrupt_reason; };
+	u8     sector_count_exp;
+	u8     _r_a;
+	u8     control;
+
+	u32    _r_b;
+} __attribute__ ((packed));
+
+/* Prefer to have code clarity over header file clarity.
+ */
+#ifdef __LITTLE_ENDIAN_BITFIELD
+struct sas_identify_frame {
+	/* Byte 0 */
+	u8  frame_type:4;
+	u8  dev_type:3;
+	u8  _un0:1;
+
+	/* Byte 1 */
+	u8  _un1;
+
+	/* Byte 2 */
+	union {
+		struct {
+			u8  _un20:1;
+			u8  smp_iport:1;
+			u8  stp_iport:1;
+			u8  ssp_iport:1;
+			u8  _un247:4;
+		};
+		u8 initiator_bits;
+	};
+
+	/* Byte 3 */
+	union {
+		struct {
+			u8  _un30:1;
+			u8 smp_tport:1;
+			u8 stp_tport:1;
+			u8 ssp_tport:1;
+			u8 _un347:4;
+		};
+		u8 target_bits;
+	};
+
+	/* Byte 4 - 11 */
+	u8 _un4_11[8];
+
+	/* Byte 12 - 19 */
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* Byte 20 */
+	u8 phy_id;
+
+	u8 _un21_27[7];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+	u8     frame_type;
+	u8     hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+	u8     _r_a;
+	u8     hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+	__be16 _r_b;
+
+	u8     changing_data_ptr:1;
+	u8     retransmit:1;
+	u8     retry_data_frames:1;
+	u8     _r_c:5;
+
+	u8     num_fill_bytes:2;
+	u8     _r_d:6;
+
+	u32    _r_e;
+	__be16 tag;
+	__be16 tptt;
+	__be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+	u8     _r_a[10];
+
+	u8     datapres:2;
+	u8     _r_b:6;
+
+	u8     status;
+
+	u32    _r_c;
+
+	__be32 sense_data_len;
+	__be32 response_data_len;
+
+	u8     resp_data[0];
+	u8     sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+	__be16  change_count;
+	__be16  route_indexes;
+	u8      _r_a;
+	u8      num_phys;
+
+	u8      conf_route_table:1;
+	u8      configuring:1;
+	u8      _r_b:6;
+
+	u8      _r_c;
+
+	u8      enclosure_logical_id[8];
+
+	u8      _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	__be16 _r_b;
+
+	u8    _r_c:4;
+	u8    attached_dev_type:3;
+	u8    _r_d:1;
+
+	u8    linkrate:4;
+	u8    _r_e:4;
+
+	u8    attached_sata_host:1;
+	u8    iproto:3;
+	u8    _r_f:4;
+
+	u8    attached_sata_dev:1;
+	u8    tproto:3;
+	u8    _r_g:3;
+	u8    attached_sata_ps:1;
+
+	u8    sas_addr[8];
+	u8    attached_sas_addr[8];
+	u8    attached_phy_id;
+
+	u8    _r_h[7];
+
+	u8    hmin_linkrate:4;
+	u8    pmin_linkrate:4;
+	u8    hmax_linkrate:4;
+	u8    pmax_linkrate:4;
+
+	u8    change_count;
+
+	u8    pptv:4;
+	u8    _r_i:3;
+	u8    virtual:1;
+
+	u8    routing_attr:4;
+	u8    _r_j:4;
+
+	u8    conn_type;
+	u8    conn_el_index;
+	u8    conn_phy_link;
+
+	u8    _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	u8    _r_b;
+
+	u8    affil_valid:1;
+	u8    affil_supp:1;
+	u8    _r_c:6;
+
+	u32    _r_d;
+
+	u8    stp_sas_addr[8];
+
+	struct dev_to_host_fis fis;
+
+	u32   _r_e;
+
+	u8    affil_stp_ini_addr[8];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+	u8    frame_type;
+	u8    function;
+	u8    result;
+	u8    reserved;
+	union {
+		struct report_general_resp  rg;
+		struct discover_resp        disc;
+		struct report_phy_sata_resp rps;
+	};
+} __attribute__ ((packed));
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+struct sas_identify_frame {
+	/* Byte 0 */
+	u8  _un0:1;
+	u8  dev_type:3;
+	u8  frame_type:4;
+
+	/* Byte 1 */
+	u8  _un1;
+
+	/* Byte 2 */
+	union {
+		struct {
+			u8  _un247:4;
+			u8  ssp_iport:1;
+			u8  stp_iport:1;
+			u8  smp_iport:1;
+			u8  _un20:1;
+		};
+		u8 initiator_bits;
+	};
+
+	/* Byte 3 */
+	union {
+		struct {
+			u8 _un347:4;
+			u8 ssp_tport:1;
+			u8 stp_tport:1;
+			u8 smp_tport:1;
+			u8 _un30:1;
+		};
+		u8 target_bits;
+	};
+
+	/* Byte 4 - 11 */
+	u8 _un4_11[8];
+
+	/* Byte 12 - 19 */
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* Byte 20 */
+	u8 phy_id;
+
+	u8 _un21_27[7];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+	u8     frame_type;
+	u8     hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+	u8     _r_a;
+	u8     hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+	__be16 _r_b;
+
+	u8     _r_c:5;
+	u8     retry_data_frames:1;
+	u8     retransmit:1;
+	u8     changing_data_ptr:1;
+
+	u8     _r_d:6;
+	u8     num_fill_bytes:2;
+
+	u32    _r_e;
+	__be16 tag;
+	__be16 tptt;
+	__be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+	u8     _r_a[10];
+
+	u8     _r_b:6;
+	u8     datapres:2;
+
+	u8     status;
+
+	u32    _r_c;
+
+	__be32 sense_data_len;
+	__be32 response_data_len;
+
+	u8     resp_data[0];
+	u8     sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+	__be16  change_count;
+	__be16  route_indexes;
+	u8      _r_a;
+	u8      num_phys;
+
+	u8      _r_b:6;
+	u8      configuring:1;
+	u8      conf_route_table:1;
+
+	u8      _r_c;
+
+	u8      enclosure_logical_id[8];
+
+	u8      _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	__be16 _r_b;
+
+	u8    _r_d:1;
+	u8    attached_dev_type:3;
+	u8    _r_c:4;
+
+	u8    _r_e:4;
+	u8    linkrate:4;
+
+	u8    _r_f:4;
+	u8    iproto:3;
+	u8    attached_sata_host:1;
+
+	u8    attached_sata_ps:1;
+	u8    _r_g:3;
+	u8    tproto:3;
+	u8    attached_sata_dev:1;
+
+	u8    sas_addr[8];
+	u8    attached_sas_addr[8];
+	u8    attached_phy_id;
+
+	u8    _r_h[7];
+
+	u8    pmin_linkrate:4;
+	u8    hmin_linkrate:4;
+	u8    pmax_linkrate:4;
+	u8    hmax_linkrate:4;
+
+	u8    change_count;
+
+	u8    virtual:1;
+	u8    _r_i:3;
+	u8    pptv:4;
+
+	u8    _r_j:4;
+	u8    routing_attr:4;
+
+	u8    conn_type;
+	u8    conn_el_index;
+	u8    conn_phy_link;
+
+	u8    _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	u8    _r_b;
+
+	u8    _r_c:6;
+	u8    affil_supp:1;
+	u8    affil_valid:1;
+
+	u32   _r_d;
+
+	u8    stp_sas_addr[8];
+
+	struct dev_to_host_fis fis;
+
+	u32   _r_e;
+
+	u8    affil_stp_ini_addr[8];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+	u8    frame_type;
+	u8    function;
+	u8    result;
+	u8    reserved;
+	union {
+		struct report_general_resp  rg;
+		struct discover_resp        disc;
+		struct report_phy_sata_resp rps;
+	};
+} __attribute__ ((packed));
+
+#else
+#error "Bitfield order not defined!"
+#endif
+
+#endif /* _SAS_H_ */