Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

Changes of note:

 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.

 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
    David Ahern.

 3) Allow the user to ask for the statistics to be filtered out of
    ipv4/ipv6 address netlink dumps.  From Sowmini Varadhan.

 4) More work to pass the network namespace context around deep into
    various packet path APIs, starting with the netfilter hooks.  From
    Eric W Biederman.

 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
    Richter.

 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.

 7) Support Very High Throughput in wireless MESH code, from Bob
    Copeland.

 8) Allow setting the ageing_time in switchdev/rocker.  From Scott
    Feldman.

 9) Properly autoload L2TP type modules, from Stephen Hemminger.

10) Fix and enable offload features by default in 8139cp driver, from
    David Woodhouse.

11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
    Jiri Benc.

12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
    Opstad.

13) Fix IPSEC flowcache overflows on large systems, from Steffen
    Klassert.

14) Convert bridging to track VLANs using rhashtable entries rather than
    a bitmap.  From Nikolay Aleksandrov.

15) Make TCP listener handling completely lockless, this is a major
    accomplishment.  Incoming request sockets now live in the
    established hash table just like any other socket too.

    From Eric Dumazet.

15) Provide more bridging attributes to netlink, from Nikolay
    Aleksandrov.

16) Use hash based algorithm for ipv4 multipath routing, this was very
    long overdue.  From Peter Nørlund.

17) Several y2038 cures, mostly avoiding timespec.  From Arnd Bergmann.

18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.

19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet.  This
    influences the port binding selection logic used by SO_REUSEPORT.

20) Add ipv6 support to VRF, from David Ahern.

21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.

22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.

23) Implement RACK loss recovery in TCP, from Yuchung Cheng.

24) Support multipath routes in MPLS, from Roopa Prabhu.

25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
    Dumazet.

26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
    Sudarsana Kalluru.

27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
    Sowa.

28) Support ipv6 geneve tunnels, from John W Linville.

29) Add flood control support to switchdev layer, from Ido Schimmel.

30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
    Hannes Frederic Sowa.

31) Support persistent maps and progs in bpf, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
  sh_eth: use DMA barriers
  switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
  net: sched: kill dead code in sch_choke.c
  irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
  net: dsa: mv88e6xxx: include DSA ports in VLANs
  net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
  net/core: fix for_each_netdev_feature
  vlan: Invoke driver vlan hooks only if device is present
  arcnet/com20020: add LEDS_CLASS dependency
  bpf, verifier: annotate verbose printer with __printf
  dp83640: Only wait for timestamps for packets with timestamping enabled.
  ptp: Change ptp_class to a proper bitmask
  dp83640: Prune rx timestamp list before reading from it
  dp83640: Delay scheduled work.
  dp83640: Include hash in timestamp/packet matching
  ipv6: fix tunnel error handling
  net/mlx5e: Fix LSO vlan insertion
  net/mlx5e: Re-eanble client vlan TX acceleration
  net/mlx5e: Return error in case mlx5e_set_features() fails
  net/mlx5e: Don't allow more than max supported channels
  ...

18 files changed, 202 insertions, 77 deletions

diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index f7b2db44eb4b..70d89230b641 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -263,6 +263,7 @@ header-y += minix_fs.h
 header-y += mman.h
 header-y += mmtimer.h
 header-y += mpls.h
+header-y += mpls_iptunnel.h
 header-y += mqueue.h
 header-y += mroute6.h
 header-y += mroute.h
diff --git a/include/uapi/linux/atm_zatm.h b/include/uapi/linux/atm_zatm.h
index 10f0fa29454f..9c9c6ad55f14 100644
--- a/include/uapi/linux/atm_zatm.h
+++ b/include/uapi/linux/atm_zatm.h
@@ -35,12 +35,6 @@ struct zatm_pool_req {
 	struct zatm_pool_info info;	/* actual information */
 };
 
-struct zatm_t_hist {
-	struct timeval real;		/* real (wall-clock) time */
-	struct timeval expected;	/* expected real time */
-};
-
-
 #define ZATM_OAM_POOL		0	/* free buffer pool for OAM cells */
 #define ZATM_AAL0_POOL		1	/* free buffer pool for AAL0 cells */
 #define ZATM_AAL5_POOL_BASE	2	/* first AAL5 free buffer pool */
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 92a48e2d5461..9ea2d22fa2cb 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -63,50 +63,16 @@ struct bpf_insn {
 	__s32	imm;		/* signed immediate constant */
 };
 
-/* BPF syscall commands */
+/* BPF syscall commands, see bpf(2) man-page for details. */
 enum bpf_cmd {
-	/* create a map with given type and attributes
-	 * fd = bpf(BPF_MAP_CREATE, union bpf_attr *, u32 size)
-	 * returns fd or negative error
-	 * map is deleted when fd is closed
-	 */
 	BPF_MAP_CREATE,
-
-	/* lookup key in a given map
-	 * err = bpf(BPF_MAP_LOOKUP_ELEM, union bpf_attr *attr, u32 size)
-	 * Using attr->map_fd, attr->key, attr->value
-	 * returns zero and stores found elem into value
-	 * or negative error
-	 */
 	BPF_MAP_LOOKUP_ELEM,
-
-	/* create or update key/value pair in a given map
-	 * err = bpf(BPF_MAP_UPDATE_ELEM, union bpf_attr *attr, u32 size)
-	 * Using attr->map_fd, attr->key, attr->value, attr->flags
-	 * returns zero or negative error
-	 */
 	BPF_MAP_UPDATE_ELEM,
-
-	/* find and delete elem by key in a given map
-	 * err = bpf(BPF_MAP_DELETE_ELEM, union bpf_attr *attr, u32 size)
-	 * Using attr->map_fd, attr->key
-	 * returns zero or negative error
-	 */
 	BPF_MAP_DELETE_ELEM,
-
-	/* lookup key in a given map and return next key
-	 * err = bpf(BPF_MAP_GET_NEXT_KEY, union bpf_attr *attr, u32 size)
-	 * Using attr->map_fd, attr->key, attr->next_key
-	 * returns zero and stores next key or negative error
-	 */
 	BPF_MAP_GET_NEXT_KEY,
-
-	/* verify and load eBPF program
-	 * prog_fd = bpf(BPF_PROG_LOAD, union bpf_attr *attr, u32 size)
-	 * Using attr->prog_type, attr->insns, attr->license
-	 * returns fd or negative error
-	 */
 	BPF_PROG_LOAD,
+	BPF_OBJ_PIN,
+	BPF_OBJ_GET,
 };
 
 enum bpf_map_type {
@@ -160,6 +126,11 @@ union bpf_attr {
 		__aligned_u64	log_buf;	/* user supplied buffer */
 		__u32		kern_version;	/* checked when prog_type=kprobe */
 	};
+
+	struct { /* anonymous struct used by BPF_OBJ_* commands */
+		__aligned_u64	pathname;
+		__u32		bpf_fd;
+	};
 } __attribute__((aligned(8)));
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
@@ -272,6 +243,32 @@ enum bpf_func_id {
 	BPF_FUNC_skb_get_tunnel_key,
 	BPF_FUNC_skb_set_tunnel_key,
 	BPF_FUNC_perf_event_read,	/* u64 bpf_perf_event_read(&map, index) */
+	/**
+	 * bpf_redirect(ifindex, flags) - redirect to another netdev
+	 * @ifindex: ifindex of the net device
+	 * @flags: bit 0 - if set, redirect to ingress instead of egress
+	 *         other bits - reserved
+	 * Return: TC_ACT_REDIRECT
+	 */
+	BPF_FUNC_redirect,
+
+	/**
+	 * bpf_get_route_realm(skb) - retrieve a dst's tclassid
+	 * @skb: pointer to skb
+	 * Return: realm if != 0
+	 */
+	BPF_FUNC_get_route_realm,
+
+	/**
+	 * bpf_perf_event_output(ctx, map, index, data, size) - output perf raw sample
+	 * @ctx: struct pt_regs*
+	 * @map: pointer to perf_event_array map
+	 * @index: index of event in the map
+	 * @data: data on stack to be output as raw data
+	 * @size: size of data
+	 * Return: 0 on success
+	 */
+	BPF_FUNC_perf_event_output,
 	__BPF_FUNC_MAX_ID,
 };
 
@@ -293,6 +290,7 @@ struct __sk_buff {
 	__u32 tc_index;
 	__u32 cb[5];
 	__u32 hash;
+	__u32 tc_classid;
 };
 
 struct bpf_tunnel_key {
diff --git a/include/uapi/linux/can/bcm.h b/include/uapi/linux/can/bcm.h
index 89ddb9dc9bdf..7a291dc1ff15 100644
--- a/include/uapi/linux/can/bcm.h
+++ b/include/uapi/linux/can/bcm.h
@@ -47,6 +47,11 @@
 #include <linux/types.h>
 #include <linux/can.h>
 
+struct bcm_timeval {
+	long tv_sec;
+	long tv_usec;
+};
+
 /**
  * struct bcm_msg_head - head of messages to/from the broadcast manager
  * @opcode:    opcode, see enum below.
@@ -62,7 +67,7 @@ struct bcm_msg_head {
 	__u32 opcode;
 	__u32 flags;
 	__u32 count;
-	struct timeval ival1, ival2;
+	struct bcm_timeval ival1, ival2;
 	canid_t can_id;
 	__u32 nframes;
 	struct can_frame frames[0];
diff --git a/include/uapi/linux/if_arcnet.h b/include/uapi/linux/if_arcnet.h
index 46e34bd0e783..cfb642f8e7bd 100644
--- a/include/uapi/linux/if_arcnet.h
+++ b/include/uapi/linux/if_arcnet.h
@@ -19,7 +19,6 @@
 #include <linux/types.h>
 #include <linux/if_ether.h>
 
-
 /*
  *    These are the defined ARCnet Protocol ID's.
  */
@@ -57,42 +56,40 @@
  * The RFC1201-specific components of an arcnet packet header.
  */
 struct arc_rfc1201 {
-    __u8  proto;		/* protocol ID field - varies		*/
-    __u8  split_flag;	/* for use with split packets		*/
-    __be16   sequence;		/* sequence number			*/
-    __u8  payload[0];	/* space remaining in packet (504 bytes)*/
+	__u8  proto;		/* protocol ID field - varies		*/
+	__u8  split_flag;	/* for use with split packets		*/
+	__be16   sequence;	/* sequence number			*/
+	__u8  payload[0];	/* space remaining in packet (504 bytes)*/
 };
 #define RFC1201_HDR_SIZE 4
 
-
 /*
  * The RFC1051-specific components.
  */
 struct arc_rfc1051 {
-    __u8 proto;		/* ARC_P_RFC1051_ARP/RFC1051_IP	*/
-    __u8 payload[0];		/* 507 bytes			*/
+	__u8 proto;		/* ARC_P_RFC1051_ARP/RFC1051_IP	*/
+	__u8 payload[0];	/* 507 bytes			*/
 };
 #define RFC1051_HDR_SIZE 1
 
-
 /*
  * The ethernet-encap-specific components.  We have a real ethernet header
  * and some data.
  */
 struct arc_eth_encap {
-    __u8 proto;		/* Always ARC_P_ETHER			*/
-    struct ethhdr eth;		/* standard ethernet header (yuck!)	*/
-    __u8 payload[0];		/* 493 bytes				*/
+	__u8 proto;		/* Always ARC_P_ETHER			*/
+	struct ethhdr eth;	/* standard ethernet header (yuck!)	*/
+	__u8 payload[0];	/* 493 bytes				*/
 };
 #define ETH_ENCAP_HDR_SIZE 14
 
-
 struct arc_cap {
 	__u8 proto;
-	__u8 cookie[sizeof(int)];   /* Actually NOT sent over the network */
+	__u8 cookie[sizeof(int)];
+				/* Actually NOT sent over the network */
 	union {
 		__u8 ack;
-		__u8 raw[0];		/* 507 bytes */
+		__u8 raw[0];	/* 507 bytes */
 	} mes;
 };
 
@@ -105,9 +102,9 @@ struct arc_cap {
  * driver.
  */
 struct arc_hardware {
-    __u8  source,		/* source ARCnet - filled in automagically */
-             dest,		/* destination ARCnet - 0 for broadcast    */
-    	     offset[2];		/* offset bytes (some weird semantics)     */
+	__u8 source;		/* source ARCnet - filled in automagically */
+	__u8 dest;		/* destination ARCnet - 0 for broadcast    */
+	__u8 offset[2];		/* offset bytes (some weird semantics)     */
 };
 #define ARC_HDR_SIZE 4
 
@@ -116,17 +113,17 @@ struct arc_hardware {
  * when you do a raw packet capture).
  */
 struct archdr {
-    /* hardware requirements */
-    struct arc_hardware hard;
-     
-    /* arcnet encapsulation-specific bits */
-    union {
-	struct arc_rfc1201   rfc1201;
-	struct arc_rfc1051   rfc1051;
-	struct arc_eth_encap eth_encap;
-	struct arc_cap       cap;
-	__u8 raw[0];		/* 508 bytes				*/
-    } soft;
+	/* hardware requirements */
+	struct arc_hardware hard;
+
+	/* arcnet encapsulation-specific bits */
+	union {
+		struct arc_rfc1201   rfc1201;
+		struct arc_rfc1051   rfc1051;
+		struct arc_eth_encap eth_encap;
+		struct arc_cap       cap;
+		__u8 raw[0];	/* 508 bytes				*/
+	} soft;
 };
 
 #endif				/* _LINUX_IF_ARCNET_H */
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
index 3635b7797508..18db14477bdd 100644
--- a/include/uapi/linux/if_bridge.h
+++ b/include/uapi/linux/if_bridge.h
@@ -127,6 +127,7 @@ enum {
 #define BRIDGE_VLAN_INFO_UNTAGGED	(1<<2)	/* VLAN egresses untagged */
 #define BRIDGE_VLAN_INFO_RANGE_BEGIN	(1<<3) /* VLAN is start of vlan range */
 #define BRIDGE_VLAN_INFO_RANGE_END	(1<<4) /* VLAN is end of vlan range */
+#define BRIDGE_VLAN_INFO_BRENTRY	(1<<5) /* Global bridge VLAN entry */
 
 struct bridge_vlan_info {
 	__u16 flags;
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index 3a5f263cfc2f..5ad57375a99f 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -232,11 +232,47 @@ enum {
 	IFLA_BR_PRIORITY,
 	IFLA_BR_VLAN_FILTERING,
 	IFLA_BR_VLAN_PROTOCOL,
+	IFLA_BR_GROUP_FWD_MASK,
+	IFLA_BR_ROOT_ID,
+	IFLA_BR_BRIDGE_ID,
+	IFLA_BR_ROOT_PORT,
+	IFLA_BR_ROOT_PATH_COST,
+	IFLA_BR_TOPOLOGY_CHANGE,
+	IFLA_BR_TOPOLOGY_CHANGE_DETECTED,
+	IFLA_BR_HELLO_TIMER,
+	IFLA_BR_TCN_TIMER,
+	IFLA_BR_TOPOLOGY_CHANGE_TIMER,
+	IFLA_BR_GC_TIMER,
+	IFLA_BR_GROUP_ADDR,
+	IFLA_BR_FDB_FLUSH,
+	IFLA_BR_MCAST_ROUTER,
+	IFLA_BR_MCAST_SNOOPING,
+	IFLA_BR_MCAST_QUERY_USE_IFADDR,
+	IFLA_BR_MCAST_QUERIER,
+	IFLA_BR_MCAST_HASH_ELASTICITY,
+	IFLA_BR_MCAST_HASH_MAX,
+	IFLA_BR_MCAST_LAST_MEMBER_CNT,
+	IFLA_BR_MCAST_STARTUP_QUERY_CNT,
+	IFLA_BR_MCAST_LAST_MEMBER_INTVL,
+	IFLA_BR_MCAST_MEMBERSHIP_INTVL,
+	IFLA_BR_MCAST_QUERIER_INTVL,
+	IFLA_BR_MCAST_QUERY_INTVL,
+	IFLA_BR_MCAST_QUERY_RESPONSE_INTVL,
+	IFLA_BR_MCAST_STARTUP_QUERY_INTVL,
+	IFLA_BR_NF_CALL_IPTABLES,
+	IFLA_BR_NF_CALL_IP6TABLES,
+	IFLA_BR_NF_CALL_ARPTABLES,
+	IFLA_BR_VLAN_DEFAULT_PVID,
 	__IFLA_BR_MAX,
 };
 
 #define IFLA_BR_MAX	(__IFLA_BR_MAX - 1)
 
+struct ifla_bridge_id {
+	__u8	prio[2];
+	__u8	addr[6]; /* ETH_ALEN */
+};
+
 enum {
 	BRIDGE_MODE_UNSPEC,
 	BRIDGE_MODE_HAIRPIN,
@@ -256,6 +292,19 @@ enum {
 	IFLA_BRPORT_PROXYARP,	/* proxy ARP */
 	IFLA_BRPORT_LEARNING_SYNC, /* mac learning sync from device */
 	IFLA_BRPORT_PROXYARP_WIFI, /* proxy ARP for Wi-Fi */
+	IFLA_BRPORT_ROOT_ID,	/* designated root */
+	IFLA_BRPORT_BRIDGE_ID,	/* designated bridge */
+	IFLA_BRPORT_DESIGNATED_PORT,
+	IFLA_BRPORT_DESIGNATED_COST,
+	IFLA_BRPORT_ID,
+	IFLA_BRPORT_NO,
+	IFLA_BRPORT_TOPOLOGY_CHANGE_ACK,
+	IFLA_BRPORT_CONFIG_PENDING,
+	IFLA_BRPORT_MESSAGE_AGE_TIMER,
+	IFLA_BRPORT_FORWARD_DELAY_TIMER,
+	IFLA_BRPORT_HOLD_TIMER,
+	IFLA_BRPORT_FLUSH,
+	IFLA_BRPORT_MULTICAST_ROUTER,
 	__IFLA_BRPORT_MAX
 };
 #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
@@ -412,6 +461,7 @@ enum {
 	IFLA_GENEVE_TOS,
 	IFLA_GENEVE_PORT,	/* destination port */
 	IFLA_GENEVE_COLLECT_METADATA,
+	IFLA_GENEVE_REMOTE6,
 	__IFLA_GENEVE_MAX
 };
 #define IFLA_GENEVE_MAX	(__IFLA_GENEVE_MAX - 1)
@@ -501,6 +551,7 @@ enum {
 				 * on/off switch
 				 */
 	IFLA_VF_STATS,		/* network device statistics */
+	IFLA_VF_TRUST,		/* Trust VF */
 	__IFLA_VF_MAX,
 };
 
@@ -562,6 +613,11 @@ enum {
 
 #define IFLA_VF_STATS_MAX (__IFLA_VF_STATS_MAX - 1)
 
+struct ifla_vf_trust {
+	__u32 vf;
+	__u32 setting;
+};
+
 /* VF ports management section
  *
  *	Nested layout of set/get msg is:
diff --git a/include/uapi/linux/magic.h b/include/uapi/linux/magic.h
index 7b1425a6b370..accb036bbc9c 100644
--- a/include/uapi/linux/magic.h
+++ b/include/uapi/linux/magic.h
@@ -75,5 +75,6 @@
 #define ANON_INODE_FS_MAGIC	0x09041934
 #define BTRFS_TEST_MAGIC	0x73727279
 #define NSFS_MAGIC		0x6e736673
+#define BPF_FS_MAGIC		0xcafe4a11
 
 #endif /* __LINUX_MAGIC_H__ */
diff --git a/include/uapi/linux/netfilter/nfnetlink_log.h b/include/uapi/linux/netfilter/nfnetlink_log.h
index 90c2c9575bac..fb21f0c717a1 100644
--- a/include/uapi/linux/netfilter/nfnetlink_log.h
+++ b/include/uapi/linux/netfilter/nfnetlink_log.h
@@ -51,6 +51,8 @@ enum nfulnl_attr_type {
 	NFULA_HWTYPE,			/* hardware type */
 	NFULA_HWHEADER,			/* hardware header */
 	NFULA_HWLEN,			/* hardware header length */
+	NFULA_CT,                       /* nf_conntrack_netlink.h */
+	NFULA_CT_INFO,                  /* enum ip_conntrack_info */
 
 	__NFULA_MAX
 };
@@ -93,5 +95,6 @@ enum nfulnl_attr_config {
 
 #define NFULNL_CFG_F_SEQ	0x0001
 #define NFULNL_CFG_F_SEQ_GLOBAL	0x0002
+#define NFULNL_CFG_F_CONNTRACK	0x0004
 
 #endif /* _NFNETLINK_LOG_H */
diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h
index 6f3fe16cd22a..f095155d8749 100644
--- a/include/uapi/linux/netlink.h
+++ b/include/uapi/linux/netlink.h
@@ -54,6 +54,7 @@ struct nlmsghdr {
 #define NLM_F_ACK		4	/* Reply with ack, with zero or error code */
 #define NLM_F_ECHO		8	/* Echo this request 		*/
 #define NLM_F_DUMP_INTR		16	/* Dump was inconsistent due to sequence change */
+#define NLM_F_DUMP_FILTERED	32	/* Dump was filtered as requested */
 
 /* Modifiers to GET request */
 #define NLM_F_ROOT	0x100	/* specify tree	root	*/
diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h
index dd3f75389076..399f39ff8048 100644
--- a/include/uapi/linux/nfc.h
+++ b/include/uapi/linux/nfc.h
@@ -86,6 +86,7 @@
  *	for this event is the application ID (AID).
  * @NFC_CMD_GET_SE: Dump all discovered secure elements from an NFC controller.
  * @NFC_CMD_SE_IO: Send/Receive APDUs to/from the selected secure element.
+ * @NFC_CMD_ACTIVATE_TARGET: Request NFC controller to reactivate target.
  * @NFC_CMD_VENDOR: Vendor specific command, to be implemented directly
  *	from the driver in order to support hardware specific operations.
  */
@@ -156,6 +157,7 @@ enum nfc_commands {
  * @NFC_ATTR_APDU: Secure element APDU
  * @NFC_ATTR_TARGET_ISO15693_DSFID: ISO 15693 Data Storage Format Identifier
  * @NFC_ATTR_TARGET_ISO15693_UID: ISO 15693 Unique Identifier
+ * @NFC_ATTR_SE_PARAMS: Parameters data from an evt_transaction
  * @NFC_ATTR_VENDOR_ID: NFC manufacturer unique ID, typically an OUI
  * @NFC_ATTR_VENDOR_SUBCMD: Vendor specific sub command
  * @NFC_ATTR_VENDOR_DATA: Vendor specific data, to be optionally passed
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index c0ab6b0a3919..1f0b4cf5dd03 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -10,6 +10,7 @@
  * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ * Copyright 2015	Intel Deutschland GmbH
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -328,7 +329,15 @@
  *	partial scan results may be available
  *
  * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
- *	intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ *	intervals and certain number of cycles, as specified by
+ *	%NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
+ *	not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
+ *	scheduled scan will run in an infinite loop with the specified interval.
+ *	These attributes are mutually exculsive,
+ *	i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
+ *	NL80211_ATTR_SCHED_SCAN_PLANS is defined.
+ *	If for some reason scheduled scan is aborted by the driver, all scan
+ *	plans are canceled (including scan plans that did not start yet).
  *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
  *	are passed, they are used in the probe requests.  For
  *	broadcast, a broadcast SSID must be passed (ie. an empty
@@ -1761,6 +1770,19 @@ enum nl80211_commands {
  * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
  *      is operating in an indoor environment.
  *
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for
+ *	scheduled scan supported by the device (u32), a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for
+ *	a scan plan (u32), a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in
+ *	a scan plan (u32), a wiphy attribute.
+ * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan.
+ *	Each scan plan defines the number of scan iterations and the interval
+ *	between scans. The last scan plan will always run infinitely,
+ *	thus it must not specify the number of iterations, only the interval
+ *	between scans. The scan plans are executed sequentially.
+ *	Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2130,6 +2152,11 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_REG_INDOOR,
 
+	NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
+	NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
+	NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
+	NL80211_ATTR_SCHED_SCAN_PLANS,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3364,6 +3391,9 @@ enum nl80211_bss_scan_width {
  *	(not present if no beacon frame has been received yet)
  * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
  *	@NL80211_BSS_TSF is known to be from a probe response (flag attribute)
+ * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
+ *	was last updated by a received frame. The value is expected to be
+ *	accurate to about 10ms. (u64, nanoseconds)
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -3383,6 +3413,7 @@ enum nl80211_bss {
 	NL80211_BSS_CHAN_WIDTH,
 	NL80211_BSS_BEACON_TSF,
 	NL80211_BSS_PRESP_DATA,
+	NL80211_BSS_LAST_SEEN_BOOTTIME,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
@@ -4589,4 +4620,28 @@ enum nl80211_tdls_peer_capability {
 	NL80211_TDLS_PEER_WMM = 1<<2,
 };
 
+/**
+ * enum nl80211_sched_scan_plan - scanning plan for scheduled scan
+ * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In
+ *	seconds (u32).
+ * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this
+ *	scan plan (u32). The last scan plan must not specify this attribute
+ *	because it will run infinitely. A value of zero is invalid as it will
+ *	make the scan plan meaningless.
+ * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
+ *	currently defined
+ * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_plan {
+	__NL80211_SCHED_SCAN_PLAN_INVALID,
+	NL80211_SCHED_SCAN_PLAN_INTERVAL,
+	NL80211_SCHED_SCAN_PLAN_ITERATIONS,
+
+	/* keep last */
+	__NL80211_SCHED_SCAN_PLAN_AFTER_LAST,
+	NL80211_SCHED_SCAN_PLAN_MAX =
+		__NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h
index e663627a8ef3..28ccedd000f5 100644
--- a/include/uapi/linux/openvswitch.h
+++ b/include/uapi/linux/openvswitch.h
@@ -349,6 +349,8 @@ enum ovs_tunnel_key_attr {
 	OVS_TUNNEL_KEY_ATTR_TP_SRC,		/* be16 src Transport Port. */
 	OVS_TUNNEL_KEY_ATTR_TP_DST,		/* be16 dst Transport Port. */
 	OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS,		/* Nested OVS_VXLAN_EXT_* */
+	OVS_TUNNEL_KEY_ATTR_IPV6_SRC,		/* struct in6_addr src IPv6 address. */
+	OVS_TUNNEL_KEY_ATTR_IPV6_DST,		/* struct in6_addr dst IPv6 address. */
 	__OVS_TUNNEL_KEY_ATTR_MAX
 };
 
diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index 651221334f49..d801bb0d9f6d 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -110,6 +110,7 @@ enum perf_sw_ids {
 	PERF_COUNT_SW_ALIGNMENT_FAULTS		= 7,
 	PERF_COUNT_SW_EMULATION_FAULTS		= 8,
 	PERF_COUNT_SW_DUMMY			= 9,
+	PERF_COUNT_SW_BPF_OUTPUT		= 10,
 
 	PERF_COUNT_SW_MAX,			/* non-ABI */
 };
diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h
index 4f0d1bc3647d..439873775d49 100644
--- a/include/uapi/linux/pkt_cls.h
+++ b/include/uapi/linux/pkt_cls.h
@@ -87,6 +87,7 @@ enum {
 #define TC_ACT_STOLEN		4
 #define TC_ACT_QUEUED		5
 #define TC_ACT_REPEAT		6
+#define TC_ACT_REDIRECT		7
 #define TC_ACT_JUMP		0x10000000
 
 /* Action type identifiers*/
@@ -373,6 +374,8 @@ enum {
 
 /* BPF classifier */
 
+#define TCA_BPF_FLAG_ACT_DIRECT		(1 << 0)
+
 enum {
 	TCA_BPF_UNSPEC,
 	TCA_BPF_ACT,
@@ -382,6 +385,7 @@ enum {
 	TCA_BPF_OPS,
 	TCA_BPF_FD,
 	TCA_BPF_NAME,
+	TCA_BPF_FLAGS,
 	__TCA_BPF_MAX,
 };
 
diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h
index a7a697986614..fb8106509000 100644
--- a/include/uapi/linux/ptrace.h
+++ b/include/uapi/linux/ptrace.h
@@ -64,6 +64,8 @@ struct ptrace_peeksiginfo_args {
 #define PTRACE_GETSIGMASK	0x420a
 #define PTRACE_SETSIGMASK	0x420b
 
+#define PTRACE_SECCOMP_GET_FILTER	0x420c
+
 /* Read signals from a shared (process wide) queue */
 #define PTRACE_PEEKSIGINFO_SHARED	(1 << 0)
 
diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h
index 9d8f5d10c1e5..123a5af4e8bb 100644
--- a/include/uapi/linux/rtnetlink.h
+++ b/include/uapi/linux/rtnetlink.h
@@ -270,6 +270,7 @@ enum rt_scope_t {
 #define RTM_F_CLONED		0x200	/* This route is cloned		*/
 #define RTM_F_EQUALIZE		0x400	/* Multipath equalizer: NI	*/
 #define RTM_F_PREFIX		0x800	/* Prefix addresses		*/
+#define RTM_F_LOOKUP_TABLE	0x1000	/* set rtm_table to FIB lookup result */
 
 /* Reserved table identifiers */
 
@@ -666,6 +667,7 @@ struct tcamsg {
 #define RTEXT_FILTER_VF		(1 << 0)
 #define RTEXT_FILTER_BRVLAN	(1 << 1)
 #define RTEXT_FILTER_BRVLAN_COMPRESSED	(1 << 2)
+#define	RTEXT_FILTER_SKIP_STATS	(1 << 3)
 
 /* End of information exported to user level */
 
diff --git a/include/uapi/linux/usb/cdc.h b/include/uapi/linux/usb/cdc.h
index b6a9cdd6e096..e2bc417b243b 100644
--- a/include/uapi/linux/usb/cdc.h
+++ b/include/uapi/linux/usb/cdc.h
@@ -6,8 +6,8 @@
  * firmware based USB peripherals.
  */
 
-#ifndef __LINUX_USB_CDC_H
-#define __LINUX_USB_CDC_H
+#ifndef __UAPI_LINUX_USB_CDC_H
+#define __UAPI_LINUX_USB_CDC_H
 
 #include <linux/types.h>
 
@@ -444,4 +444,4 @@ struct usb_cdc_ncm_ndp_input_size {
 #define USB_CDC_NCM_CRC_NOT_APPENDED			0x00
 #define USB_CDC_NCM_CRC_APPENDED			0x01
 
-#endif /* __LINUX_USB_CDC_H */
+#endif /* __UAPI_LINUX_USB_CDC_H */