mtd: cleanup nand.h

- *var instead of * var
- proper multiline comment
- func(args) instead of func (args)
- 80 lines

So from
|total: 2 errors, 37 warnings, 654 lines checked
we got to one warning.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 99 insertions, 56 deletions

diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 023866572fb1..acd0b500f55a 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -27,15 +27,17 @@
 struct mtd_info;
 struct nand_flash_dev;
 /* Scan and identify a NAND device */
-extern int nand_scan (struct mtd_info *mtd, int max_chips);
-/* Separate phases of nand_scan(), allowing board driver to intervene
- * and override command or ECC setup according to flash type */
+extern int nand_scan(struct mtd_info *mtd, int max_chips);
+/*
+ * Separate phases of nand_scan(), allowing board driver to intervene
+ * and override command or ECC setup according to flash type.
+ */
 extern int nand_scan_ident(struct mtd_info *mtd, int max_chips,
 			   struct nand_flash_dev *table);
 extern int nand_scan_tail(struct mtd_info *mtd);
 
 /* Free resources held by the NAND device */
-extern void nand_release (struct mtd_info *mtd);
+extern void nand_release(struct mtd_info *mtd);
 
 /* Internal helper for board drivers which need to override command function */
 extern void nand_wait_ready(struct mtd_info *mtd);
@@ -49,7 +51,8 @@ extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 /* The maximum number of NAND chips in an array */
 #define NAND_MAX_CHIPS		8
 
-/* This constant declares the max. oobsize / page, which
+/*
+ * This constant declares the max. oobsize / page, which
  * is supported now. If you add a chip with bigger oobsize/page
  * adjust this accordingly.
  */
@@ -153,9 +156,10 @@ typedef enum {
 #define NAND_GET_DEVICE		0x80
 
 
-/* Option constants for bizarre disfunctionality and real
-*  features
-*/
+/*
+ * Option constants for bizarre disfunctionality and real
+ * features.
+ */
 /* Chip can not auto increment pages */
 #define NAND_NO_AUTOINCR	0x00000001
 /* Buswitdh is 16 bit */
@@ -166,19 +170,27 @@ typedef enum {
 #define NAND_CACHEPRG		0x00000008
 /* Chip has copy back function */
 #define NAND_COPYBACK		0x00000010
-/* AND Chip which has 4 banks and a confusing page / block
- * assignment. See Renesas datasheet for further information */
+/*
+ * AND Chip which has 4 banks and a confusing page / block
+ * assignment. See Renesas datasheet for further information.
+ */
 #define NAND_IS_AND		0x00000020
-/* Chip has a array of 4 pages which can be read without
- * additional ready /busy waits */
+/*
+ * Chip has a array of 4 pages which can be read without
+ * additional ready /busy waits.
+ */
 #define NAND_4PAGE_ARRAY	0x00000040
-/* Chip requires that BBT is periodically rewritten to prevent
+/*
+ * Chip requires that BBT is periodically rewritten to prevent
  * bits from adjacent blocks from 'leaking' in altering data.
- * This happens with the Renesas AG-AND chips, possibly others.  */
+ * This happens with the Renesas AG-AND chips, possibly others.
+ */
 #define BBT_AUTO_REFRESH	0x00000080
-/* Chip does not require ready check on read. True
+/*
+ * Chip does not require ready check on read. True
  * for all large page devices, as they do not support
- * autoincrement.*/
+ * autoincrement.
+ */
 #define NAND_NO_READRDY		0x00000100
 /* Chip does not allow subpage writes */
 #define NAND_NO_SUBPAGE_WRITE	0x00000200
@@ -213,8 +225,10 @@ typedef enum {
 #define NAND_USE_FLASH_BBT	0x00010000
 /* This option skips the bbt scan during initialization. */
 #define NAND_SKIP_BBTSCAN	0x00020000
-/* This option is defined if the board driver allocates its own buffers
-   (e.g. because it needs them DMA-coherent */
+/*
+ * This option is defined if the board driver allocates its own buffers
+ * (e.g. because it needs them DMA-coherent).
+ */
 #define NAND_OWN_BUFFERS	0x00040000
 /* Chip may not exist, so silence any errors in scan */
 #define NAND_SCAN_SILENT_NODEV	0x00080000
@@ -304,8 +318,9 @@ struct nand_onfi_params {
  * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
  * @lock:               protection lock
  * @active:		the mtd device which holds the controller currently
- * @wq:			wait queue to sleep on if a NAND operation is in progress
- *                      used instead of the per chip wait queue when a hw controller is available
+ * @wq:			wait queue to sleep on if a NAND operation is in
+ *			progress used instead of the per chip wait queue
+ *			when a hw controller is available.
  */
 struct nand_hw_control {
 	spinlock_t	 lock;
@@ -329,9 +344,11 @@ struct nand_hw_control {
  * @correct:	function for ecc correction, matching to ecc generator (sw/hw)
  * @read_page_raw:	function to read a raw page without ECC
  * @write_page_raw:	function to write a raw page without ECC
- * @read_page:	function to read a page according to the ecc generator requirements
+ * @read_page:	function to read a page according to the ecc generator
+ *		requirements.
  * @read_subpage:	function to read parts of the page covered by ECC.
- * @write_page:	function to write a page according to the ecc generator requirements
+ * @write_page:	function to write a page according to the ecc generator
+ *		requirements.
  * @read_oob:	function to read chip OOB data
  * @write_oob:	function to write chip OOB data
  */
@@ -393,13 +410,16 @@ struct nand_buffers {
 
 /**
  * struct nand_chip - NAND Private Flash Chip Data
- * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
- * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the flash device
+ * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the
+ *			flash device
+ * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the
+ *			flash device.
  * @read_byte:		[REPLACEABLE] read one byte from the chip
  * @read_word:		[REPLACEABLE] read one word from the chip
  * @write_buf:		[REPLACEABLE] write data from the buffer to the chip
  * @read_buf:		[REPLACEABLE] read data from the chip into the buffer
- * @verify_buf:		[REPLACEABLE] verify buffer contents against the chip data
+ * @verify_buf:		[REPLACEABLE] verify buffer contents against the chip
+ *			data.
  * @select_chip:	[REPLACEABLE] select chip nr
  * @block_bad:		[REPLACEABLE] check, if the block is bad
  * @block_markbad:	[REPLACEABLE] mark the block bad
@@ -409,45 +429,60 @@ struct nand_buffers {
  *			mtd->oobsize, mtd->writesize and so on.
  *			@id_data contains the 8 bytes values of NAND_CMD_READID.
  *			Return with the bus width.
- * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line
- *			If set to NULL no access to ready/busy is available and the ready/busy information
- *			is read from the chip status register
- * @cmdfunc:		[REPLACEABLE] hardwarespecific function for writing commands to the chip
- * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on ready
+ * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accesing
+ *			device ready/busy line. If set to NULL no access to
+ *			ready/busy is available and the ready/busy information
+ *			is read from the chip status register.
+ * @cmdfunc:		[REPLACEABLE] hardwarespecific function for writing
+ *			commands to the chip.
+ * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on
+ *			ready.
  * @ecc:		[BOARDSPECIFIC] ecc control ctructure
  * @buffers:		buffer structure for read/write
  * @hwcontrol:		platform-specific hardware control structure
  * @ops:		oob operation operands
- * @erase_cmd:		[INTERN] erase command write function, selectable due to AND support
+ * @erase_cmd:		[INTERN] erase command write function, selectable due
+ *			to AND support.
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
- * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
+ * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transfering
+ *			data from array to read regs (tR).
  * @state:		[INTERN] the current state of the NAND device
  * @oob_poi:		poison value buffer
- * @page_shift:		[INTERN] number of address bits in a page (column address bits)
+ * @page_shift:		[INTERN] number of address bits in a page (column
+ *			address bits).
  * @phys_erase_shift:	[INTERN] number of address bits in a physical eraseblock
  * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry
  * @chip_shift:		[INTERN] number of address bits in one chip
- * @options:		[BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about
- *			special functionality. See the defines for further explanation
- * @badblockpos:	[INTERN] position of the bad block marker in the oob area
+ * @options:		[BOARDSPECIFIC] various chip options. They can partly
+ *			be set to inform nand_scan about special functionality.
+ *			See the defines for further explanation.
+ * @badblockpos:	[INTERN] position of the bad block marker in the oob
+ *			area.
  * @cellinfo:		[INTERN] MLC/multichip data from chip ident
  * @numchips:		[INTERN] number of physical chips
  * @chipsize:		[INTERN] the size of one chip for multichip arrays
  * @pagemask:		[INTERN] page number mask = number of (pages / chip) - 1
- * @pagebuf:		[INTERN] holds the pagenumber which is currently in data_buf
+ * @pagebuf:		[INTERN] holds the pagenumber which is currently in
+ *			data_buf.
  * @subpagesize:	[INTERN] holds the subpagesize
- * @onfi_version:	[INTERN] holds the chip ONFI version (BCD encoded), non 0 if ONFI supported
- * @onfi_params:	[INTERN] holds the ONFI page parameter when ONFI is supported, 0 otherwise
+ * @onfi_version:	[INTERN] holds the chip ONFI version (BCD encoded),
+ *			non 0 if ONFI supported.
+ * @onfi_params:	[INTERN] holds the ONFI page parameter when ONFI is
+ *			supported, 0 otherwise.
  * @ecclayout:		[REPLACEABLE] the default ecc placement scheme
  * @bbt:		[INTERN] bad block table pointer
- * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash lookup
+ * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash
+ *			lookup.
  * @bbt_md:		[REPLACEABLE] bad block table mirror descriptor
- * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for initial bad block scan
- * @controller:		[REPLACEABLE] a pointer to a hardware controller structure
- *			which is shared among multiple independend devices
+ * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for initial
+ *			bad block scan.
+ * @controller:		[REPLACEABLE] a pointer to a hardware controller
+ *			structure which is shared among multiple independend
+ *			devices.
  * @priv:		[OPTIONAL] pointer to private chip date
- * @errstat:		[OPTIONAL] hardware specific function to perform additional error status checks
- *			(determine if errors are correctable)
+ * @errstat:		[OPTIONAL] hardware specific function to perform
+ *			additional error status checks (determine if errors are
+ *			correctable).
  * @write_page:		[REPLACEABLE] High-level page write function
  */
 
@@ -457,24 +492,32 @@ struct nand_chip {
 
 	uint8_t		(*read_byte)(struct mtd_info *mtd);
 	u16		(*read_word)(struct mtd_info *mtd);
-	void		(*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
-	void		(*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
-	int		(*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+	void		(*write_buf)(struct mtd_info *mtd, const uint8_t *buf,
+			int len);
+	void		(*read_buf)(struct mtd_info *mtd, uint8_t *buf,
+			int len);
+	int		(*verify_buf)(struct mtd_info *mtd, const uint8_t *buf,
+			int len);
 	void		(*select_chip)(struct mtd_info *mtd, int chip);
-	int		(*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
+	int		(*block_bad)(struct mtd_info *mtd, loff_t ofs,
+			int getchip);
 	int		(*block_markbad)(struct mtd_info *mtd, loff_t ofs);
 	void		(*cmd_ctrl)(struct mtd_info *mtd, int dat,
 				    unsigned int ctrl);
 	int		(*init_size)(struct mtd_info *mtd,
 					struct nand_chip *this, u8 *id_data);
 	int		(*dev_ready)(struct mtd_info *mtd);
-	void		(*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
-	int		(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
+	void		(*cmdfunc)(struct mtd_info *mtd, unsigned command,
+			int column, int page_addr);
+	int		(*waitfunc)(struct mtd_info *mtd,
+			struct nand_chip *this);
 	void		(*erase_cmd)(struct mtd_info *mtd, int page);
 	int		(*scan_bbt)(struct mtd_info *mtd);
-	int		(*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page);
-	int		(*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
-				      const uint8_t *buf, int page, int cached, int raw);
+	int		(*errstat)(struct mtd_info *mtd, struct nand_chip *this,
+			int state, int status, int page);
+	int		(*write_page)(struct mtd_info *mtd,
+			struct nand_chip *chip, const uint8_t *buf, int page,
+			int cached, int raw);
 
 	int		chip_delay;
 	unsigned int	options;
@@ -557,7 +600,7 @@ struct nand_flash_dev {
 */
 struct nand_manufacturers {
 	int id;
-	char * name;
+	char *name;
 };
 
 extern struct nand_flash_dev nand_flash_ids[];
@@ -570,7 +613,7 @@ extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt);
 extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 			   int allowbbt);
 extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
-			size_t * retlen, uint8_t * buf);
+			size_t *retlen, uint8_t *buf);
 
 /**
  * struct platform_nand_chip - chip level device structure