[PATCH] chardev: GPIO for SCx200 & PC-8736x: add gpio-ops vtable

Abstract the gpio operations into a new nsc_gpio_ops vtable.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 33 insertions, 0 deletions

diff --git a/include/linux/nsc_gpio.h b/include/linux/nsc_gpio.h
new file mode 100644
index 000000000000..3ad8ae9dcb5a
--- /dev/null
+++ b/include/linux/nsc_gpio.h
@@ -0,0 +1,33 @@
+/**
+   nsc_gpio.c
+
+   National Semiconductor GPIO common access methods.
+
+   struct nsc_gpio_ops abstracts the low-level access
+   operations for the GPIO units on 2 NSC chip families; the GEODE
+   integrated CPU, and the PC-8736[03456] integrated PC-peripheral
+   chips.
+
+   The GPIO units on these chips have the same pin architecture, but
+   the access methods differ.  Thus, scx200_gpio and pc8736x_gpio
+   implement their own versions of these routines; and use the common
+   file-operations routines implemented in nsc_gpio module.
+
+   Copyright (c) 2005 Jim Cromie <jim.cromie@gmail.com>
+
+   NB: this work was tested on the Geode SC-1100 and PC-87366 chips.
+   NSC sold the GEODE line to AMD, and the PC-8736x line to Winbond.
+*/
+
+struct nsc_gpio_ops {
+	struct module*	owner;
+	u32	(*gpio_config)	(unsigned iminor, u32 mask, u32 bits);
+	void	(*gpio_dump)	(unsigned iminor);
+	int	(*gpio_get)	(unsigned iminor);
+	void	(*gpio_set)	(unsigned iminor, int state);
+	void	(*gpio_set_high)(unsigned iminor);
+	void	(*gpio_set_low)	(unsigned iminor);
+	void	(*gpio_change)	(unsigned iminor);
+	int	(*gpio_current)	(unsigned iminor);
+};
+