Merge tag 'usb-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.16 merge window

Not a lot here during this merge window. Mostly we just have
the usual miscellaneous patches (removal of unnecessary prints,
proper dependencies being added to Kconfig, build warning fixes,
new device ID, etc.

Other than those, the only important new features are the
new support for OS Strings which should help Linux Gadget
Drivers behave better under MS Windows. Also Babble Recovery
implementation for MUSB on AM335x. Lastly, we also have
ARCH_QCOM PHY support though phy-msm.

Signed-of-by: Felipe Balbi <balbi@ti.com>

Conflicts:
	drivers/usb/phy/phy-mv-u3d-usb.c

4 files changed, 111 insertions, 34 deletions

diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index d3ca3b53837c..7373203140e7 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -57,6 +57,61 @@
 struct usb_configuration;
 
 /**
+ * struct usb_os_desc_ext_prop - describes one "Extended Property"
+ * @entry: used to keep a list of extended properties
+ * @type: Extended Property type
+ * @name_len: Extended Property unicode name length, including terminating '\0'
+ * @name: Extended Property name
+ * @data_len: Length of Extended Property blob (for unicode store double len)
+ * @data: Extended Property blob
+ * @item: Represents this Extended Property in configfs
+ */
+struct usb_os_desc_ext_prop {
+	struct list_head	entry;
+	u8			type;
+	int			name_len;
+	char			*name;
+	int			data_len;
+	char			*data;
+	struct config_item	item;
+};
+
+/**
+ * struct usb_os_desc - describes OS descriptors associated with one interface
+ * @ext_compat_id: 16 bytes of "Compatible ID" and "Subcompatible ID"
+ * @ext_prop: Extended Properties list
+ * @ext_prop_len: Total length of Extended Properties blobs
+ * @ext_prop_count: Number of Extended Properties
+ * @opts_mutex: Optional mutex protecting config data of a usb_function_instance
+ * @group: Represents OS descriptors associated with an interface in configfs
+ * @owner: Module associated with this OS descriptor
+ */
+struct usb_os_desc {
+	char			*ext_compat_id;
+	struct list_head	ext_prop;
+	int			ext_prop_len;
+	int			ext_prop_count;
+	struct mutex		*opts_mutex;
+	struct config_group	group;
+	struct module		*owner;
+};
+
+/**
+ * struct usb_os_desc_table - describes OS descriptors associated with one
+ * interface of a usb_function
+ * @if_id: Interface id
+ * @os_desc: "Extended Compatibility ID" and "Extended Properties" of the
+ *	interface
+ *
+ * Each interface can have at most one "Extended Compatibility ID" and a
+ * number of "Extended Properties".
+ */
+struct usb_os_desc_table {
+	int			if_id;
+	struct usb_os_desc	*os_desc;
+};
+
+/**
  * struct usb_function - describes one function of a configuration
  * @name: For diagnostics, identifies the function.
  * @strings: tables of strings, keyed by identifiers assigned during bind()
@@ -73,6 +128,10 @@ struct usb_configuration;
  *	be available at super speed.
  * @config: assigned when @usb_add_function() is called; this is the
  *	configuration with which this function is associated.
+ * @os_desc_table: Table of (interface id, os descriptors) pairs. The function
+ *	can expose more than one interface. If an interface is a member of
+ *	an IAD, only the first interface of IAD has its entry in the table.
+ * @os_desc_n: Number of entries in os_desc_table
  * @bind: Before the gadget can register, all of its functions bind() to the
  *	available resources including string and interface identifiers used
  *	in interface or class descriptors; endpoints; I/O buffers; and so on.
@@ -129,6 +188,9 @@ struct usb_function {
 
 	struct usb_configuration	*config;
 
+	struct usb_os_desc_table	*os_desc_table;
+	unsigned			os_desc_n;
+
 	/* REVISIT:  bind() functions can be marked __init, which
 	 * makes trouble for section mismatch analysis.  See if
 	 * we can't restructure things to avoid mismatching.
@@ -327,6 +389,8 @@ extern void usb_composite_unregister(struct usb_composite_driver *driver);
 extern void usb_composite_setup_continue(struct usb_composite_dev *cdev);
 extern int composite_dev_prepare(struct usb_composite_driver *composite,
 		struct usb_composite_dev *cdev);
+extern int composite_os_desc_req_prepare(struct usb_composite_dev *cdev,
+					 struct usb_ep *ep0);
 void composite_dev_cleanup(struct usb_composite_dev *cdev);
 
 static inline struct usb_composite_driver *to_cdriver(
@@ -335,11 +399,19 @@ static inline struct usb_composite_driver *to_cdriver(
 	return container_of(gdrv, struct usb_composite_driver, gadget_driver);
 }
 
+#define OS_STRING_QW_SIGN_LEN		14
+#define OS_STRING_IDX			0xEE
+
 /**
  * struct usb_composite_device - represents one composite usb gadget
  * @gadget: read-only, abstracts the gadget's usb peripheral controller
  * @req: used for control responses; buffer is pre-allocated
+ * @os_desc_req: used for OS descriptors responses; buffer is pre-allocated
  * @config: the currently active configuration
+ * @qw_sign: qwSignature part of the OS string
+ * @b_vendor_code: bMS_VendorCode part of the OS string
+ * @use_os_string: false by default, interested gadgets set it
+ * @os_desc_config: the configuration to be used with OS descriptors
  *
  * One of these devices is allocated and initialized before the
  * associated device driver's bind() is called.
@@ -369,9 +441,16 @@ static inline struct usb_composite_driver *to_cdriver(
 struct usb_composite_dev {
 	struct usb_gadget		*gadget;
 	struct usb_request		*req;
+	struct usb_request		*os_desc_req;
 
 	struct usb_configuration	*config;
 
+	/* OS String is a custom (yet popular) extension to the USB standard. */
+	u8				qw_sign[OS_STRING_QW_SIGN_LEN];
+	u8				b_vendor_code;
+	struct usb_configuration	*os_desc_config;
+	unsigned int			use_os_string:1;
+
 	/* private: */
 	/* internals */
 	unsigned int			suspended:1;
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 32754835a39b..b0a39243295a 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -23,21 +23,6 @@
 #include <linux/clk.h>
 
 /**
- * Supported USB modes
- *
- * USB_PERIPHERAL       Only peripheral mode is supported.
- * USB_HOST             Only host mode is supported.
- * USB_OTG              OTG mode is supported.
- *
- */
-enum usb_mode_type {
-	USB_NONE = 0,
-	USB_PERIPHERAL,
-	USB_HOST,
-	USB_OTG,
-};
-
-/**
  * OTG control
  *
  * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
@@ -115,27 +100,23 @@ enum usb_chg_type {
 /**
  * struct msm_otg_platform_data - platform device data
  *              for msm_otg driver.
- * @phy_init_seq: PHY configuration sequence. val, reg pairs
- *              terminated by -1.
+ * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
+ *              "do not overwrite default vaule at this address".
+ * @phy_init_sz: PHY configuration sequence size.
  * @vbus_power: VBUS power on/off routine.
  * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
  * @mode: Supported mode (OTG/peripheral/host).
  * @otg_control: OTG switch controlled by user/Id pin
- * @default_mode: Default operational mode. Applicable only if
- *              OTG switch is controller by user.
- * @pclk_src_name: pclk is derived from ebi1_usb_clk in case of 7x27 and 8k
- *              dfab_usb_hs_clk in case of 8660 and 8960.
  */
 struct msm_otg_platform_data {
 	int *phy_init_seq;
+	int phy_init_sz;
 	void (*vbus_power)(bool on);
 	unsigned power_budget;
-	enum usb_mode_type mode;
+	enum usb_dr_mode mode;
 	enum otg_control_type otg_control;
-	enum usb_mode_type default_mode;
 	enum msm_usb_phy_type phy_type;
 	void (*setup_gpio)(enum usb_otg_state state);
-	char *pclk_src_name;
 	int (*link_clk_reset)(struct clk *link_clk, bool assert);
 	int (*phy_clk_reset)(struct clk *phy_clk);
 };
@@ -147,7 +128,6 @@ struct msm_otg_platform_data {
  * @irq: IRQ number assigned for HSUSB controller.
  * @clk: clock struct of usb_hs_clk.
  * @pclk: clock struct of usb_hs_pclk.
- * @pclk_src: pclk source for voting.
  * @phy_reset_clk: clock struct of usb_phy_clk.
  * @core_clk: clock struct of usb_hs_core_clk.
  * @regs: ioremapped register base address.
@@ -168,7 +148,6 @@ struct msm_otg {
 	int irq;
 	struct clk *clk;
 	struct clk *pclk;
-	struct clk *pclk_src;
 	struct clk *phy_reset_clk;
 	struct clk *core_clk;
 	void __iomem *regs;
@@ -179,10 +158,18 @@ struct msm_otg {
 	atomic_t in_lpm;
 	int async_int;
 	unsigned cur_power;
+	int phy_number;
 	struct delayed_work chg_work;
 	enum usb_chg_state chg_state;
 	enum usb_chg_type chg_type;
 	u8 dcd_retries;
+	struct regulator *v3p3;
+	struct regulator *v1p8;
+	struct regulator *vddcx;
+
+	struct reset_control *phy_rst;
+	struct reset_control *link_rst;
+	int vdd_levels[3];
 };
 
 #endif
diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h
index 6e97a2d3d39f..a29f6030afb1 100644
--- a/include/linux/usb/msm_hsusb_hw.h
+++ b/include/linux/usb/msm_hsusb_hw.h
@@ -16,6 +16,9 @@
 #ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
 #define __LINUX_USB_GADGET_MSM72K_UDC_H__
 
+/* USB phy selector - in TCSR address range */
+#define USB2_PHY_SEL         0xfd4ab000
+
 #define USB_AHBBURST         (MSM_USB_BASE + 0x0090)
 #define USB_AHBMODE          (MSM_USB_BASE + 0x0098)
 #define USB_CAPLENGTH        (MSM_USB_BASE + 0x0100) /* 8 bit */
@@ -25,13 +28,15 @@
 #define USB_OTGSC            (MSM_USB_BASE + 0x01A4)
 #define USB_USBMODE          (MSM_USB_BASE + 0x01A8)
 #define USB_PHY_CTRL         (MSM_USB_BASE + 0x0240)
+#define USB_PHY_CTRL2        (MSM_USB_BASE + 0x0278)
 
 #define USBCMD_RESET   2
 #define USB_USBINTR          (MSM_USB_BASE + 0x0148)
 
 #define PORTSC_PHCD            (1 << 23) /* phy suspend mode */
-#define PORTSC_PTS_MASK         (3 << 30)
-#define PORTSC_PTS_ULPI         (3 << 30)
+#define PORTSC_PTS_MASK        (3 << 30)
+#define PORTSC_PTS_ULPI        (2 << 30)
+#define PORTSC_PTS_SERIAL      (3 << 30)
 
 #define USB_ULPI_VIEWPORT    (MSM_USB_BASE + 0x0170)
 #define ULPI_RUN              (1 << 30)
@@ -41,9 +46,14 @@
 #define ULPI_DATA(n)          ((n) & 255)
 #define ULPI_DATA_READ(n)     (((n) >> 8) & 255)
 
+/* synopsys 28nm phy registers */
+#define ULPI_PWR_CLK_MNG_REG	0x88
+#define OTG_COMP_DISABLE	BIT(0)
+
 #define ASYNC_INTR_CTRL         (1 << 29) /* Enable async interrupt */
 #define ULPI_STP_CTRL           (1 << 30) /* Block communication with PHY */
 #define PHY_RETEN               (1 << 1) /* PHY retention enable/disable */
+#define PHY_POR_ASSERT		(1 << 0) /* USB2 28nm PHY POR ASSERT */
 
 /* OTG definitions */
 #define OTGSC_INTSTS_MASK	(0x7f << 16)
diff --git a/include/linux/usb/usb_phy_gen_xceiv.h b/include/linux/usb/usb_phy_generic.h
index cc8d818a83be..68adae83affc 100644
--- a/include/linux/usb/usb_phy_gen_xceiv.h
+++ b/include/linux/usb/usb_phy_generic.h
@@ -3,7 +3,7 @@
 
 #include <linux/usb/otg.h>
 
-struct usb_phy_gen_xceiv_platform_data {
+struct usb_phy_generic_platform_data {
 	enum usb_phy_type type;
 	unsigned long clk_rate;
 
@@ -13,16 +13,17 @@ struct usb_phy_gen_xceiv_platform_data {
 	int gpio_reset;
 };
 
-#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
+#if IS_ENABLED(CONFIG_NOP_USB_XCEIV)
 /* sometimes transceivers are accessed only through e.g. ULPI */
-extern void usb_nop_xceiv_register(void);
-extern void usb_nop_xceiv_unregister(void);
+extern struct platform_device *usb_phy_generic_register(void);
+extern void usb_phy_generic_unregister(struct platform_device *);
 #else
-static inline void usb_nop_xceiv_register(void)
+static inline struct platform_device *usb_phy_generic_register(void)
 {
+	return NULL;
 }
 
-static inline void usb_nop_xceiv_unregister(void)
+static inline void usb_phy_generic_unregister(struct platform_device *pdev)
 {
 }
 #endif