Merge branch 's3c-move' into devel

Conflicts:

	arch/arm/mach-versatile/core.c

42 files changed, 281 insertions, 1329 deletions

diff --git a/include/asm-arm/plat-s3c/debug-macro.S b/include/asm-arm/plat-s3c/debug-macro.S
deleted file mode 100644
index 84c40b847da8..000000000000
--- a/include/asm-arm/plat-s3c/debug-macro.S
+++ /dev/null
@@ -1,75 +0,0 @@
-/* linux/include/asm-arm/plat-s3c/debug-macro.S
- *
- * Copyright 2005, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/plat-s3c/regs-serial.h>
-
-/* The S3C2440 implementations are used by default as they are the
- * most widely re-used */
-
-	.macro fifo_level_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
-	.endm
-
-#ifndef fifo_level
-#define fifo_level fifo_level_s3c2410
-#endif
-
-	.macro  fifo_full_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		tst	\rd, #S3C2440_UFSTAT_TXFULL
-	.endm
-
-#ifndef fifo_full
-#define fifo_full fifo_full_s3c2440
-#endif
-
-	.macro	senduart,rd,rx
-		strb 	\rd, [\rx, # S3C2410_UTXH ]
-	.endm
-
-	.macro	busyuart, rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
-		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
-		beq	1001f				@
-		@ FIFO enabled...
-1003:
-		fifo_full \rd, \rx
-		bne	1003b
-		b	1002f
-
-1001:
-		@ busy waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
-		tst	\rd, #S3C2410_UTRSTAT_TXFE
-		beq	1001b
-
-1002:		@ exit busyuart
-	.endm
-
-	.macro	waituart,rd,rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
-		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
-		beq	1001f				@
-		@ FIFO enabled...
-1003:
-		fifo_level \rd, \rx
-		teq	\rd, #0
-		bne	1003b
-		b	1002f
-1001:
-		@ idle waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
-		tst	\rd, #S3C2410_UTRSTAT_TXFE
-		beq	1001b
-
-1002:		@ exit busyuart
-	.endm
diff --git a/include/asm-arm/plat-s3c/map.h b/include/asm-arm/plat-s3c/map.h
deleted file mode 100644
index b84289d32a54..000000000000
--- a/include/asm-arm/plat-s3c/map.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/plat-s3c/map.h
- *
- * Copyright 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - Memory map definitions (virtual addresses)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_MAP_H
-#define __ASM_PLAT_MAP_H __FILE__
-
-/* Fit all our registers in at 0xF4000000 upwards, trying to use as
- * little of the VA space as possible so vmalloc and friends have a
- * better chance of getting memory.
- *
- * we try to ensure stuff like the IRQ registers are available for
- * an single MOVS instruction (ie, only 8 bits of set data)
- */
-
-#define S3C_ADDR_BASE	(0xF4000000)
-
-#ifndef __ASSEMBLY__
-#define S3C_ADDR(x)	((void __iomem __force *)S3C_ADDR_BASE + (x))
-#else
-#define S3C_ADDR(x)	(S3C_ADDR_BASE + (x))
-#endif
-
-#define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
-#define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
-#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* system control */
-#define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
-#define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
-#define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
-
-#endif /* __ASM_PLAT_MAP_H */
diff --git a/include/asm-arm/plat-s3c/regs-adc.h b/include/asm-arm/plat-s3c/regs-adc.h
deleted file mode 100644
index 4323cccc86cd..000000000000
--- a/include/asm-arm/plat-s3c/regs-adc.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
- *
- * Copyright (c) 2004 Shannon Holland <holland@loser.net>
- *
- * This program is free software; yosu can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 ADC registers
-*/
-
-#ifndef __ASM_ARCH_REGS_ADC_H
-#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
-
-#define S3C2410_ADCREG(x) (x)
-
-#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
-#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
-#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
-#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
-#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
-
-
-/* ADCCON Register Bits */
-#define S3C2410_ADCCON_ECFLG		(1<<15)
-#define S3C2410_ADCCON_PRSCEN		(1<<14)
-#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
-#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
-#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
-#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
-#define S3C2410_ADCCON_STDBM		(1<<2)
-#define S3C2410_ADCCON_READ_START	(1<<1)
-#define S3C2410_ADCCON_ENABLE_START	(1<<0)
-#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
-
-
-/* ADCTSC Register Bits */
-#define S3C2410_ADCTSC_YM_SEN		(1<<7)
-#define S3C2410_ADCTSC_YP_SEN		(1<<6)
-#define S3C2410_ADCTSC_XM_SEN		(1<<5)
-#define S3C2410_ADCTSC_XP_SEN		(1<<4)
-#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
-#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
-#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
-
-/* ADCDAT0 Bits */
-#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
-
-/* ADCDAT1 Bits */
-#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
-
-#endif /* __ASM_ARCH_REGS_ADC_H */
-
-
diff --git a/include/asm-arm/plat-s3c/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h
deleted file mode 100644
index a0daa647b92c..000000000000
--- a/include/asm-arm/plat-s3c/regs-serial.h
+++ /dev/null
@@ -1,232 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
- *
- *  From linux/include/asm-arm/hardware/serial_s3c2410.h
- *
- *  Internal header file for Samsung S3C2410 serial ports (UART0-2)
- *
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- *  Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk)
- *
- *  Adapted from:
- *
- *  Internal header file for MX1ADS serial ports (UART1 & 2)
- *
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#ifndef __ASM_ARM_REGS_SERIAL_H
-#define __ASM_ARM_REGS_SERIAL_H
-
-#define S3C24XX_VA_UART0      (S3C_VA_UART)
-#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
-#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
-#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
-
-#define S3C2410_PA_UART0      (S3C24XX_PA_UART)
-#define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
-#define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
-#define S3C2443_PA_UART3      (S3C24XX_PA_UART + 0xC000 )
-
-#define S3C2410_URXH	  (0x24)
-#define S3C2410_UTXH	  (0x20)
-#define S3C2410_ULCON	  (0x00)
-#define S3C2410_UCON	  (0x04)
-#define S3C2410_UFCON	  (0x08)
-#define S3C2410_UMCON	  (0x0C)
-#define S3C2410_UBRDIV	  (0x28)
-#define S3C2410_UTRSTAT	  (0x10)
-#define S3C2410_UERSTAT	  (0x14)
-#define S3C2410_UFSTAT	  (0x18)
-#define S3C2410_UMSTAT	  (0x1C)
-
-#define S3C2410_LCON_CFGMASK	  ((0xF<<3)|(0x3))
-
-#define S3C2410_LCON_CS5	  (0x0)
-#define S3C2410_LCON_CS6	  (0x1)
-#define S3C2410_LCON_CS7	  (0x2)
-#define S3C2410_LCON_CS8	  (0x3)
-#define S3C2410_LCON_CSMASK	  (0x3)
-
-#define S3C2410_LCON_PNONE	  (0x0)
-#define S3C2410_LCON_PEVEN	  (0x5 << 3)
-#define S3C2410_LCON_PODD	  (0x4 << 3)
-#define S3C2410_LCON_PMASK	  (0x7 << 3)
-
-#define S3C2410_LCON_STOPB	  (1<<2)
-#define S3C2410_LCON_IRM          (1<<6)
-
-#define S3C2440_UCON_CLKMASK	  (3<<10)
-#define S3C2440_UCON_PCLK	  (0<<10)
-#define S3C2440_UCON_UCLK	  (1<<10)
-#define S3C2440_UCON_PCLK2	  (2<<10)
-#define S3C2440_UCON_FCLK	  (3<<10)
-#define S3C2443_UCON_EPLL	  (3<<10)
-
-#define S3C2440_UCON2_FCLK_EN	  (1<<15)
-#define S3C2440_UCON0_DIVMASK	  (15 << 12)
-#define S3C2440_UCON1_DIVMASK	  (15 << 12)
-#define S3C2440_UCON2_DIVMASK	  (7 << 12)
-#define S3C2440_UCON_DIVSHIFT	  (12)
-
-#define S3C2412_UCON_CLKMASK	(3<<10)
-#define S3C2412_UCON_UCLK	(1<<10)
-#define S3C2412_UCON_USYSCLK	(3<<10)
-#define S3C2412_UCON_PCLK	(0<<10)
-#define S3C2412_UCON_PCLK2	(2<<10)
-
-#define S3C2410_UCON_UCLK	  (1<<10)
-#define S3C2410_UCON_SBREAK	  (1<<4)
-
-#define S3C2410_UCON_TXILEVEL	  (1<<9)
-#define S3C2410_UCON_RXILEVEL	  (1<<8)
-#define S3C2410_UCON_TXIRQMODE	  (1<<2)
-#define S3C2410_UCON_RXIRQMODE	  (1<<0)
-#define S3C2410_UCON_RXFIFO_TOI	  (1<<7)
-#define S3C2443_UCON_RXERR_IRQEN  (1<<6)
-#define S3C2443_UCON_LOOPBACK	  (1<<5)
-
-#define S3C2410_UCON_DEFAULT	  (S3C2410_UCON_TXILEVEL  | \
-				   S3C2410_UCON_RXILEVEL  | \
-				   S3C2410_UCON_TXIRQMODE | \
-				   S3C2410_UCON_RXIRQMODE | \
-				   S3C2410_UCON_RXFIFO_TOI)
-
-#define S3C2410_UFCON_FIFOMODE	  (1<<0)
-#define S3C2410_UFCON_TXTRIG0	  (0<<6)
-#define S3C2410_UFCON_RXTRIG8	  (1<<4)
-#define S3C2410_UFCON_RXTRIG12	  (2<<4)
-
-/* S3C2440 FIFO trigger levels */
-#define S3C2440_UFCON_RXTRIG1	  (0<<4)
-#define S3C2440_UFCON_RXTRIG8	  (1<<4)
-#define S3C2440_UFCON_RXTRIG16	  (2<<4)
-#define S3C2440_UFCON_RXTRIG32	  (3<<4)
-
-#define S3C2440_UFCON_TXTRIG0	  (0<<6)
-#define S3C2440_UFCON_TXTRIG16	  (1<<6)
-#define S3C2440_UFCON_TXTRIG32	  (2<<6)
-#define S3C2440_UFCON_TXTRIG48	  (3<<6)
-
-#define S3C2410_UFCON_RESETBOTH	  (3<<1)
-#define S3C2410_UFCON_RESETTX	  (1<<2)
-#define S3C2410_UFCON_RESETRX	  (1<<1)
-
-#define S3C2410_UFCON_DEFAULT	  (S3C2410_UFCON_FIFOMODE | \
-				   S3C2410_UFCON_TXTRIG0  | \
-				   S3C2410_UFCON_RXTRIG8 )
-
-#define	S3C2410_UMCOM_AFC	  (1<<4)
-#define	S3C2410_UMCOM_RTS_LOW	  (1<<0)
-
-#define S3C2412_UMCON_AFC_63	(0<<5)		/* same as s3c2443 */
-#define S3C2412_UMCON_AFC_56	(1<<5)
-#define S3C2412_UMCON_AFC_48	(2<<5)
-#define S3C2412_UMCON_AFC_40	(3<<5)
-#define S3C2412_UMCON_AFC_32	(4<<5)
-#define S3C2412_UMCON_AFC_24	(5<<5)
-#define S3C2412_UMCON_AFC_16	(6<<5)
-#define S3C2412_UMCON_AFC_8	(7<<5)
-
-#define S3C2410_UFSTAT_TXFULL	  (1<<9)
-#define S3C2410_UFSTAT_RXFULL	  (1<<8)
-#define S3C2410_UFSTAT_TXMASK	  (15<<4)
-#define S3C2410_UFSTAT_TXSHIFT	  (4)
-#define S3C2410_UFSTAT_RXMASK	  (15<<0)
-#define S3C2410_UFSTAT_RXSHIFT	  (0)
-
-/* UFSTAT S3C2443 same as S3C2440 */
-#define S3C2440_UFSTAT_TXFULL	  (1<<14)
-#define S3C2440_UFSTAT_RXFULL	  (1<<6)
-#define S3C2440_UFSTAT_TXSHIFT	  (8)
-#define S3C2440_UFSTAT_RXSHIFT	  (0)
-#define S3C2440_UFSTAT_TXMASK	  (63<<8)
-#define S3C2440_UFSTAT_RXMASK	  (63)
-
-#define S3C2410_UTRSTAT_TXE	  (1<<2)
-#define S3C2410_UTRSTAT_TXFE	  (1<<1)
-#define S3C2410_UTRSTAT_RXDR	  (1<<0)
-
-#define S3C2410_UERSTAT_OVERRUN	  (1<<0)
-#define S3C2410_UERSTAT_FRAME	  (1<<2)
-#define S3C2410_UERSTAT_BREAK	  (1<<3)
-#define S3C2443_UERSTAT_PARITY	  (1<<1)
-
-#define S3C2410_UERSTAT_ANY	  (S3C2410_UERSTAT_OVERRUN | \
-				   S3C2410_UERSTAT_FRAME | \
-				   S3C2410_UERSTAT_BREAK)
-
-#define S3C2410_UMSTAT_CTS	  (1<<0)
-#define S3C2410_UMSTAT_DeltaCTS	  (1<<2)
-
-#define S3C2443_DIVSLOT		  (0x2C)
-
-#ifndef __ASSEMBLY__
-
-/* struct s3c24xx_uart_clksrc
- *
- * this structure defines a named clock source that can be used for the
- * uart, so that the best clock can be selected for the requested baud
- * rate.
- *
- * min_baud and max_baud define the range of baud-rates this clock is
- * acceptable for, if they are both zero, it is assumed any baud rate that
- * can be generated from this clock will be used.
- *
- * divisor gives the divisor from the clock to the one seen by the uart
-*/
-
-struct s3c24xx_uart_clksrc {
-	const char	*name;
-	unsigned int	 divisor;
-	unsigned int	 min_baud;
-	unsigned int	 max_baud;
-};
-
-/* configuration structure for per-machine configurations for the
- * serial port
- *
- * the pointer is setup by the machine specific initialisation from the
- * arch/arm/mach-s3c2410/ directory.
-*/
-
-struct s3c2410_uartcfg {
-	unsigned char	   hwport;	 /* hardware port number */
-	unsigned char	   unused;
-	unsigned short	   flags;
-	upf_t		   uart_flags;	 /* default uart flags */
-
-	unsigned long	   ucon;	 /* value of ucon for port */
-	unsigned long	   ulcon;	 /* value of ulcon for port */
-	unsigned long	   ufcon;	 /* value of ufcon for port */
-
-	struct s3c24xx_uart_clksrc *clocks;
-	unsigned int		    clocks_size;
-};
-
-/* s3c24xx_uart_devs
- *
- * this is exported from the core as we cannot use driver_register(),
- * or platform_add_device() before the console_initcall()
-*/
-
-extern struct platform_device *s3c24xx_uart_devs[3];
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARM_REGS_SERIAL_H */
-
diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h
deleted file mode 100644
index cc0eedd53e38..000000000000
--- a/include/asm-arm/plat-s3c/regs-timer.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Timer configuration
-*/
-
-
-#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H
-
-#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
-#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
-
-#define S3C2410_TCFG0	      S3C_TIMERREG(0x00)
-#define S3C2410_TCFG1	      S3C_TIMERREG(0x04)
-#define S3C2410_TCON	      S3C_TIMERREG(0x08)
-
-#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
-#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
-#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
-#define S3C2410_TCFG_DEADZONE_MASK   (255<<16)
-#define S3C2410_TCFG_DEADZONE_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX4_DIV2	  (0<<16)
-#define S3C2410_TCFG1_MUX4_DIV4	  (1<<16)
-#define S3C2410_TCFG1_MUX4_DIV8	  (2<<16)
-#define S3C2410_TCFG1_MUX4_DIV16  (3<<16)
-#define S3C2410_TCFG1_MUX4_TCLK1  (4<<16)
-#define S3C2410_TCFG1_MUX4_MASK	  (15<<16)
-#define S3C2410_TCFG1_MUX4_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX3_DIV2	  (0<<12)
-#define S3C2410_TCFG1_MUX3_DIV4	  (1<<12)
-#define S3C2410_TCFG1_MUX3_DIV8	  (2<<12)
-#define S3C2410_TCFG1_MUX3_DIV16  (3<<12)
-#define S3C2410_TCFG1_MUX3_TCLK1  (4<<12)
-#define S3C2410_TCFG1_MUX3_MASK	  (15<<12)
-
-
-#define S3C2410_TCFG1_MUX2_DIV2	  (0<<8)
-#define S3C2410_TCFG1_MUX2_DIV4	  (1<<8)
-#define S3C2410_TCFG1_MUX2_DIV8	  (2<<8)
-#define S3C2410_TCFG1_MUX2_DIV16  (3<<8)
-#define S3C2410_TCFG1_MUX2_TCLK1  (4<<8)
-#define S3C2410_TCFG1_MUX2_MASK	  (15<<8)
-
-
-#define S3C2410_TCFG1_MUX1_DIV2	  (0<<4)
-#define S3C2410_TCFG1_MUX1_DIV4	  (1<<4)
-#define S3C2410_TCFG1_MUX1_DIV8	  (2<<4)
-#define S3C2410_TCFG1_MUX1_DIV16  (3<<4)
-#define S3C2410_TCFG1_MUX1_TCLK0  (4<<4)
-#define S3C2410_TCFG1_MUX1_MASK	  (15<<4)
-
-#define S3C2410_TCFG1_MUX0_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX0_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX0_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX0_DIV16  (3<<0)
-#define S3C2410_TCFG1_MUX0_TCLK0  (4<<0)
-#define S3C2410_TCFG1_MUX0_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_MUX_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX_DIV16   (3<<0)
-#define S3C2410_TCFG1_MUX_TCLK    (4<<0)
-#define S3C2410_TCFG1_MUX_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_SHIFT(x)	  ((x) * 4)
-
-/* for each timer, we have an count buffer, an compare buffer and
- * an observation buffer
-*/
-
-/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
-
-#define S3C2410_TCNTB(tmr)    S3C_TIMERREG2(tmr, 0x00)
-#define S3C2410_TCMPB(tmr)    S3C_TIMERREG2(tmr, 0x04)
-#define S3C2410_TCNTO(tmr)    S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
-
-#define S3C2410_TCON_T4RELOAD	  (1<<22)
-#define S3C2410_TCON_T4MANUALUPD  (1<<21)
-#define S3C2410_TCON_T4START	  (1<<20)
-
-#define S3C2410_TCON_T3RELOAD	  (1<<19)
-#define S3C2410_TCON_T3INVERT	  (1<<18)
-#define S3C2410_TCON_T3MANUALUPD  (1<<17)
-#define S3C2410_TCON_T3START	  (1<<16)
-
-#define S3C2410_TCON_T2RELOAD	  (1<<15)
-#define S3C2410_TCON_T2INVERT	  (1<<14)
-#define S3C2410_TCON_T2MANUALUPD  (1<<13)
-#define S3C2410_TCON_T2START	  (1<<12)
-
-#define S3C2410_TCON_T1RELOAD	  (1<<11)
-#define S3C2410_TCON_T1INVERT	  (1<<10)
-#define S3C2410_TCON_T1MANUALUPD  (1<<9)
-#define S3C2410_TCON_T1START	  (1<<8)
-
-#define S3C2410_TCON_T0DEADZONE	  (1<<4)
-#define S3C2410_TCON_T0RELOAD	  (1<<3)
-#define S3C2410_TCON_T0INVERT	  (1<<2)
-#define S3C2410_TCON_T0MANUALUPD  (1<<1)
-#define S3C2410_TCON_T0START	  (1<<0)
-
-#endif /*  __ASM_ARCH_REGS_TIMER_H */
-
-
-
diff --git a/include/asm-arm/plat-s3c/uncompress.h b/include/asm-arm/plat-s3c/uncompress.h
deleted file mode 100644
index 19b9eda39485..000000000000
--- a/include/asm-arm/plat-s3c/uncompress.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/* linux/include/asm-arm/plat-s3c/uncompress.h
- *
- * Copyright 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_UNCOMPRESS_H
-#define __ASM_PLAT_UNCOMPRESS_H
-
-typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
-
-/* uart setup */
-
-static unsigned int fifo_mask;
-static unsigned int fifo_max;
-
-/* forward declerations */
-
-static void arch_detect_cpu(void);
-
-/* defines for UART registers */
-
-#include <asm/plat-s3c/regs-serial.h>
-#include <asm/plat-s3c/regs-watchdog.h>
-
-/* working in physical space... */
-#undef S3C2410_WDOGREG
-#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
-
-/* how many bytes we allow into the FIFO at a time in FIFO mode */
-#define FIFO_MAX	 (14)
-
-#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT)
-
-static __inline__ void
-uart_wr(unsigned int reg, unsigned int val)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	*ptr = val;
-}
-
-static __inline__ unsigned int
-uart_rd(unsigned int reg)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	return *ptr;
-}
-
-/* we can deal with the case the UARTs are being run
- * in FIFO mode, so that we don't hold up our execution
- * waiting for tx to happen...
-*/
-
-static void putc(int ch)
-{
-	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
-		int level;
-
-		while (1) {
-			level = uart_rd(S3C2410_UFSTAT);
-			level &= fifo_mask;
-
-			if (level < fifo_max)
-				break;
-		}
-
-	} else {
-		/* not using fifos */
-
-		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
-			barrier();
-	}
-
-	/* write byte to transmission register */
-	uart_wr(S3C2410_UTXH, ch);
-}
-
-static inline void flush(void)
-{
-}
-
-#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
-
-/* CONFIG_S3C_BOOT_WATCHDOG
- *
- * Simple boot-time watchdog setup, to reboot the system if there is
- * any problem with the boot process
-*/
-
-#ifdef CONFIG_S3C_BOOT_WATCHDOG
-
-#define WDOG_COUNT (0xff00)
-
-static inline void arch_decomp_wdog(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-}
-
-static void arch_decomp_wdog_start(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
-}
-
-#else
-#define arch_decomp_wdog_start()
-#define arch_decomp_wdog()
-#endif
-
-#ifdef CONFIG_S3C_BOOT_ERROR_RESET
-
-static void arch_decomp_error(const char *x)
-{
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System resetting\n");
-
-	__raw_writel(0x4000, S3C2410_WTDAT);
-	__raw_writel(0x4000, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
-
-	while(1);
-}
-
-#define arch_error arch_decomp_error
-#endif
-
-static void error(char *err);
-
-static void
-arch_decomp_setup(void)
-{
-	/* we may need to setup the uart(s) here if we are not running
-	 * on an BAST... the BAST will have left the uarts configured
-	 * after calling linux.
-	 */
-
-	arch_detect_cpu();
-	arch_decomp_wdog_start();
-}
-
-
-#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/include/asm-arm/plat-s3c24xx/clock.h b/include/asm-arm/plat-s3c24xx/clock.h
deleted file mode 100644
index 235b753cd877..000000000000
--- a/include/asm-arm/plat-s3c24xx/clock.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/clock.h
- * linux/arch/arm/mach-s3c2410/clock.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct clk {
-	struct list_head      list;
-	struct module        *owner;
-	struct clk           *parent;
-	const char           *name;
-	int		      id;
-	int		      usage;
-	unsigned long         rate;
-	unsigned long         ctrlbit;
-
-	int		    (*enable)(struct clk *, int enable);
-	int		    (*set_rate)(struct clk *c, unsigned long rate);
-	unsigned long	    (*get_rate)(struct clk *c);
-	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
-	int		    (*set_parent)(struct clk *c, struct clk *parent);
-};
-
-/* other clocks which may be registered by board support */
-
-extern struct clk s3c24xx_dclk0;
-extern struct clk s3c24xx_dclk1;
-extern struct clk s3c24xx_clkout0;
-extern struct clk s3c24xx_clkout1;
-extern struct clk s3c24xx_uclk;
-
-extern struct clk clk_usb_bus;
-
-/* core clock support */
-
-extern struct clk clk_f;
-extern struct clk clk_h;
-extern struct clk clk_p;
-extern struct clk clk_mpll;
-extern struct clk clk_upll;
-extern struct clk clk_xtal;
-
-/* exports for arch/arm/mach-s3c2410
- *
- * Please DO NOT use these outside of arch/arm/mach-s3c2410
-*/
-
-extern struct mutex clocks_mutex;
-
-extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
-
-extern int s3c24xx_register_clock(struct clk *clk);
-extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
-
-extern int s3c24xx_setup_clocks(unsigned long xtal,
-				unsigned long fclk,
-				unsigned long hclk,
-				unsigned long pclk);
diff --git a/include/asm-arm/plat-s3c24xx/common-smdk.h b/include/asm-arm/plat-s3c24xx/common-smdk.h
deleted file mode 100644
index 58d9094c935c..000000000000
--- a/include/asm-arm/plat-s3c24xx/common-smdk.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void smdk_machine_init(void);
diff --git a/include/asm-arm/plat-s3c24xx/cpu.h b/include/asm-arm/plat-s3c24xx/cpu.h
deleted file mode 100644
index 23e420e8bd5b..000000000000
--- a/include/asm-arm/plat-s3c24xx/cpu.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/cpu.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
-
-#ifndef MHZ
-#define MHZ (1000*1000)
-#endif
-
-#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
-
-/* forward declaration */
-struct s3c24xx_uart_resources;
-struct platform_device;
-struct s3c2410_uartcfg;
-struct map_desc;
-
-/* core initialisation functions */
-
-extern void s3c24xx_init_irq(void);
-
-extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-
-extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c24xx_init_clocks(int xtal);
-
-extern void s3c24xx_init_uartdevs(char *name,
-				  struct s3c24xx_uart_resources *res,
-				  struct s3c2410_uartcfg *cfg, int no);
-
-/* timer for 2410/2440 */
-
-struct sys_timer;
-extern struct sys_timer s3c24xx_timer;
-
-/* system device classes */
-
-extern struct sysdev_class s3c2410_sysclass;
-extern struct sysdev_class s3c2412_sysclass;
-extern struct sysdev_class s3c2440_sysclass;
-extern struct sysdev_class s3c2442_sysclass;
-extern struct sysdev_class s3c2443_sysclass;
diff --git a/include/asm-arm/plat-s3c24xx/devs.h b/include/asm-arm/plat-s3c24xx/devs.h
deleted file mode 100644
index badaac9d64a8..000000000000
--- a/include/asm-arm/plat-s3c24xx/devs.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/devs.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 standard platform devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-#include <linux/platform_device.h>
-
-struct s3c24xx_uart_resources {
-	struct resource		*resources;
-	unsigned long		 nr_resources;
-};
-
-extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
-
-extern struct platform_device *s3c24xx_uart_devs[];
-extern struct platform_device *s3c24xx_uart_src[];
-
-extern struct platform_device s3c_device_timer[];
-
-extern struct platform_device s3c_device_usb;
-extern struct platform_device s3c_device_lcd;
-extern struct platform_device s3c_device_wdt;
-extern struct platform_device s3c_device_i2c;
-extern struct platform_device s3c_device_iis;
-extern struct platform_device s3c_device_rtc;
-extern struct platform_device s3c_device_adc;
-extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_hsmmc;
-
-extern struct platform_device s3c_device_spi0;
-extern struct platform_device s3c_device_spi1;
-
-extern struct platform_device s3c_device_nand;
-
-extern struct platform_device s3c_device_usbgadget;
-
-/* s3c2440 specific devices */
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern struct platform_device s3c_device_camif;
-
-#endif
diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h
deleted file mode 100644
index c78efe316fc8..000000000000
--- a/include/asm-arm/plat-s3c24xx/dma.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/dma.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
-
-#define DMA_CH_VALID		(1<<31)
-#define DMA_CH_NEVER		(1<<30)
-
-struct s3c24xx_dma_addr {
-	unsigned long		from;
-	unsigned long		to;
-};
-
-/* struct s3c24xx_dma_map
- *
- * this holds the mapping information for the channel selected
- * to be connected to the specified device
-*/
-
-struct s3c24xx_dma_map {
-	const char		*name;
-	struct s3c24xx_dma_addr  hw_addr;
-
-	unsigned long		 channels[S3C2410_DMA_CHANNELS];
-	unsigned long		 channels_rx[S3C2410_DMA_CHANNELS];
-};
-
-struct s3c24xx_dma_selection {
-	struct s3c24xx_dma_map	*map;
-	unsigned long		 map_size;
-	unsigned long		 dcon_mask;
-
-	void	(*select)(struct s3c2410_dma_chan *chan,
-			  struct s3c24xx_dma_map *map);
-
-	void	(*direction)(struct s3c2410_dma_chan *chan,
-			     struct s3c24xx_dma_map *map,
-			     enum s3c2410_dmasrc dir);
-};
-
-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
-
-/* struct s3c24xx_dma_order_ch
- *
- * channel map for one of the `enum dma_ch` dma channels. the list
- * entry contains a set of low-level channel numbers, orred with
- * DMA_CH_VALID, which are checked in the order in the array.
-*/
-
-struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
-	unsigned int	flags;				/* flags */
-};
-
-/* struct s3c24xx_dma_order
- *
- * information provided by either the core or the board to give the
- * dma system a hint on how to allocate channels
-*/
-
-struct s3c24xx_dma_order {
-	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
-};
-
-extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
-
-/* DMA init code, called from the cpu support code */
-
-extern int s3c2410_dma_init(void);
-
-extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
-			    unsigned int stride);
diff --git a/include/asm-arm/plat-s3c24xx/irq.h b/include/asm-arm/plat-s3c24xx/irq.h
deleted file mode 100644
index 45746a995343..000000000000
--- a/include/asm-arm/plat-s3c24xx/irq.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/irq.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
-
-/* these are exported for arch/arm/mach-* usage */
-extern struct irq_chip s3c_irq_level_chip;
-extern struct irq_chip s3c_irq_chip;
-
-static inline void
-s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
-		int subcheck)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
-	/* check to see if we need to mask the parent IRQ */
-
-	if ((submask  & subcheck) == subcheck) {
-		__raw_writel(mask | parentbit, S3C2410_INTMSK);
-	}
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void
-s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
-	mask &= ~parentbit;
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void
-s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	s3c_irqsub_mask(irqno, parentmask, group);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-static inline void
-s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-/* exported for use in arch/arm/mach-s3c2410 */
-
-#ifdef CONFIG_PM
-extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
-#else
-#define s3c_irq_wake NULL
-#endif
-
-extern int s3c_irqext_type(unsigned int irq, unsigned int type);
diff --git a/include/asm-arm/plat-s3c24xx/pm.h b/include/asm-arm/plat-s3c24xx/pm.h
deleted file mode 100644
index cc623667e48a..000000000000
--- a/include/asm-arm/plat-s3c24xx/pm.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/pm.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* s3c2410_pm_init
- *
- * called from board at initialisation time to setup the power
- * management
-*/
-
-#ifdef CONFIG_PM
-
-extern __init int s3c2410_pm_init(void);
-
-#else
-
-static inline int s3c2410_pm_init(void)
-{
-	return 0;
-}
-#endif
-
-/* configuration for the IRQ mask over sleep */
-extern unsigned long s3c_irqwake_intmask;
-extern unsigned long s3c_irqwake_eintmask;
-
-/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
-extern unsigned long s3c_irqwake_intallow;
-extern unsigned long s3c_irqwake_eintallow;
-
-/* per-cpu sleep functions */
-
-extern void (*pm_cpu_prep)(void);
-extern void (*pm_cpu_sleep)(void);
-
-/* Flags for PM Control */
-
-extern unsigned long s3c_pm_flags;
-
-/* from sleep.S */
-
-extern int  s3c2410_cpu_save(unsigned long *saveblk);
-extern void s3c2410_cpu_suspend(void);
-extern void s3c2410_cpu_resume(void);
-
-extern unsigned long s3c2410_sleep_save_phys;
-
-/* sleep save info */
-
-struct sleep_save {
-	void __iomem	*reg;
-	unsigned long	val;
-};
-
-#define SAVE_ITEM(x) \
-	{ .reg = (x) }
-
-extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
-
-#ifdef CONFIG_PM
-extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
-extern int s3c24xx_irq_resume(struct sys_device *dev);
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
-#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2400.h b/include/asm-arm/plat-s3c24xx/s3c2400.h
deleted file mode 100644
index 3a5a16821af8..000000000000
--- a/include/asm-arm/plat-s3c24xx/s3c2400.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2400 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *     09-Fev-2006 LCVR  First version, based on s3c2410.h
-*/
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern  int s3c2400_init(void);
-
-extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2400_init_clocks(int xtal);
-
-#else
-#define s3c2400_init_clocks NULL
-#define s3c2400_init_uarts NULL
-#define s3c2400_map_io NULL
-#define s3c2400_init NULL
-#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2410.h b/include/asm-arm/plat-s3c24xx/s3c2410.h
deleted file mode 100644
index 3cd1ec677b3f..000000000000
--- a/include/asm-arm/plat-s3c24xx/s3c2410.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 machine directory
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifdef CONFIG_CPU_S3C2410
-
-extern  int s3c2410_init(void);
-
-extern void s3c2410_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2410_init_clocks(int xtal);
-
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#endif
-
-extern int s3c2410_baseclk_add(void);
diff --git a/include/asm-arm/plat-s3c24xx/s3c2412.h b/include/asm-arm/plat-s3c24xx/s3c2412.h
deleted file mode 100644
index 3ec97685e781..000000000000
--- a/include/asm-arm/plat-s3c24xx/s3c2412.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern  int s3c2412_init(void);
-
-extern void s3c2412_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern  int s3c2412_baseclk_add(void);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2440.h b/include/asm-arm/plat-s3c24xx/s3c2440.h
deleted file mode 100644
index 107853bf9481..000000000000
--- a/include/asm-arm/plat-s3c24xx/s3c2440.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2440
-extern  int s3c2440_init(void);
-#else
-#define s3c2440_init NULL
-#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2442.h b/include/asm-arm/plat-s3c24xx/s3c2442.h
deleted file mode 100644
index 451a23a2092a..000000000000
--- a/include/asm-arm/plat-s3c24xx/s3c2442.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2442
-extern  int s3c2442_init(void);
-#else
-#define s3c2442_init NULL
-#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2443.h b/include/asm-arm/plat-s3c24xx/s3c2443.h
deleted file mode 100644
index 11d83b5c84e6..000000000000
--- a/include/asm-arm/plat-s3c24xx/s3c2443.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2443 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2443
-
-struct s3c2410_uartcfg;
-
-extern  int s3c2443_init(void);
-
-extern void s3c2443_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2443_init_clocks(int xtal);
-
-extern  int s3c2443_baseclk_add(void);
-
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#endif
diff --git a/include/asm-mips/cevt-r4k.h b/include/asm-mips/cevt-r4k.h
new file mode 100644
index 000000000000..fa4328f9124f
--- /dev/null
+++ b/include/asm-mips/cevt-r4k.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Kevin D. Kissell
+ */
+
+/*
+ * Definitions used for common event timer implementation
+ * for MIPS 4K-type processors and their MIPS MT variants.
+ * Avoids unsightly extern declarations in C files.
+ */
+#ifndef __ASM_CEVT_R4K_H
+#define __ASM_CEVT_R4K_H
+
+DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+
+void mips_event_handler(struct clock_event_device *dev);
+int c0_compare_int_usable(void);
+void mips_set_clock_mode(enum clock_event_mode, struct clock_event_device *);
+irqreturn_t c0_compare_interrupt(int, void *);
+
+extern struct irqaction c0_compare_irqaction;
+extern int cp0_timer_irq_installed;
+
+/*
+ * Possibly handle a performance counter interrupt.
+ * Return true if the timer interrupt should not be checked
+ */
+
+static inline int handle_perf_irq(int r2)
+{
+	/*
+	 * The performance counter overflow interrupt may be shared with the
+	 * timer interrupt (cp0_perfcount_irq < 0). If it is and a
+	 * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
+	 * and we can't reliably determine if a counter interrupt has also
+	 * happened (!r2) then don't check for a timer interrupt.
+	 */
+	return (cp0_perfcount_irq < 0) &&
+		perf_irq() == IRQ_HANDLED &&
+		!r2;
+}
+
+#endif /* __ASM_CEVT_R4K_H */
diff --git a/include/asm-mips/irqflags.h b/include/asm-mips/irqflags.h
index 881e8866501d..701ec0ba8fa9 100644
--- a/include/asm-mips/irqflags.h
+++ b/include/asm-mips/irqflags.h
@@ -38,8 +38,17 @@ __asm__(
 	"	.set	pop						\n"
 	"	.endm");
 
+extern void smtc_ipi_replay(void);
+
 static inline void raw_local_irq_enable(void)
 {
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC kernel needs to do a software replay of queued
+	 * IPIs, at the cost of call overhead on each local_irq_enable()
+	 */
+	smtc_ipi_replay();
+#endif
 	__asm__ __volatile__(
 		"raw_local_irq_enable"
 		: /* no outputs */
@@ -47,6 +56,7 @@ static inline void raw_local_irq_enable(void)
 		: "memory");
 }
 
+
 /*
  * For cli() we have to insert nops to make sure that the new value
  * has actually arrived in the status register before the end of this
@@ -185,15 +195,14 @@ __asm__(
 	"	.set	pop						\n"
 	"	.endm							\n");
 
-extern void smtc_ipi_replay(void);
 
 static inline void raw_local_irq_restore(unsigned long flags)
 {
 	unsigned long __tmp1;
 
-#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
+#ifdef CONFIG_MIPS_MT_SMTC
 	/*
-	 * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred
+	 * SMTC kernel needs to do a software replay of queued
 	 * IPIs, at the cost of branch and call overhead on each
 	 * local_irq_restore()
 	 */
@@ -208,6 +217,17 @@ static inline void raw_local_irq_restore(unsigned long flags)
 		: "memory");
 }
 
+static inline void __raw_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+	__asm__ __volatile__(
+		"raw_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+}
+
 static inline int raw_irqs_disabled_flags(unsigned long flags)
 {
 #ifdef CONFIG_MIPS_MT_SMTC
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index a46f8e258e6b..979866000da4 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -1462,7 +1462,7 @@ set_c0_##name(unsigned int set)					\
 {								\
 	unsigned int res;					\
 	unsigned int omt;					\
-	unsigned int flags;					\
+	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 	omt = __dmt();						\
@@ -1480,7 +1480,7 @@ clear_c0_##name(unsigned int clear)				\
 {								\
 	unsigned int res;					\
 	unsigned int omt;					\
-	unsigned int flags;					\
+	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 	omt = __dmt();						\
@@ -1498,7 +1498,7 @@ change_c0_##name(unsigned int change, unsigned int new)		\
 {								\
 	unsigned int res;					\
 	unsigned int omt;					\
-	unsigned int flags;					\
+	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 								\
diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h
index 4396e9ffd418..55813d6150c7 100644
--- a/include/asm-mips/pgtable-32.h
+++ b/include/asm-mips/pgtable-32.h
@@ -57,7 +57,7 @@ extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
 #define PMD_ORDER	1
 #define PTE_ORDER	0
 
-#define PTRS_PER_PGD	((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
+#define PTRS_PER_PGD	(USER_PTRS_PER_PGD * 2)
 #define PTRS_PER_PTE	((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
 
 #define USER_PTRS_PER_PGD	(0x80000000UL/PGDIR_SIZE)
diff --git a/include/asm-mips/smtc.h b/include/asm-mips/smtc.h
index 3639b28f80db..ea60bf08dcb0 100644
--- a/include/asm-mips/smtc.h
+++ b/include/asm-mips/smtc.h
@@ -6,6 +6,7 @@
  */
 
 #include <asm/mips_mt.h>
+#include <asm/smtc_ipi.h>
 
 /*
  * System-wide SMTC status information
@@ -38,14 +39,15 @@ struct mm_struct;
 struct task_struct;
 
 void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu);
-
+void self_ipi(struct smtc_ipi *);
 void smtc_flush_tlb_asid(unsigned long asid);
-extern int mipsmt_build_cpu_map(int startslot);
-extern void mipsmt_prepare_cpus(void);
+extern int smtc_build_cpu_map(int startslot);
+extern void smtc_prepare_cpus(int cpus);
 extern void smtc_smp_finish(void);
 extern void smtc_boot_secondary(int cpu, struct task_struct *t);
 extern void smtc_cpus_done(void);
 
+
 /*
  * Sharing the TLB between multiple VPEs means that the
  * "random" index selection function is not allowed to
diff --git a/include/asm-mips/sn/mapped_kernel.h b/include/asm-mips/sn/mapped_kernel.h
index c3dd5d0d525f..721496a0bb92 100644
--- a/include/asm-mips/sn/mapped_kernel.h
+++ b/include/asm-mips/sn/mapped_kernel.h
@@ -5,6 +5,8 @@
 #ifndef __ASM_SN_MAPPED_KERNEL_H
 #define __ASM_SN_MAPPED_KERNEL_H
 
+#include <linux/mmzone.h>
+
 /*
  * Note on how mapped kernels work: the text and data section is
  * compiled at cksseg segment (LOADADDR = 0xc001c000), and the
@@ -29,10 +31,8 @@
 #define MAPPED_ADDR_RO_TO_PHYS(x)	(x - REP_BASE)
 #define MAPPED_ADDR_RW_TO_PHYS(x)	(x - REP_BASE - 16777216)
 
-#define MAPPED_KERN_RO_PHYSBASE(n) \
-			(PLAT_NODE_DATA(n)->kern_vars.kv_ro_baseaddr)
-#define MAPPED_KERN_RW_PHYSBASE(n) \
-			(PLAT_NODE_DATA(n)->kern_vars.kv_rw_baseaddr)
+#define MAPPED_KERN_RO_PHYSBASE(n) (hub_data(n)->kern_vars.kv_ro_baseaddr)
+#define MAPPED_KERN_RW_PHYSBASE(n) (hub_data(n)->kern_vars.kv_rw_baseaddr)
 
 #define MAPPED_KERN_RO_TO_PHYS(x) \
 				((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \
diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h
index 051e1af0bb95..4c37c4e5f72e 100644
--- a/include/asm-mips/stackframe.h
+++ b/include/asm-mips/stackframe.h
@@ -297,14 +297,31 @@
 #ifdef CONFIG_MIPS_MT_SMTC
 		.set	mips32r2
 		/*
-		 * This may not really be necessary if ints are already
-		 * inhibited here.
+		 * We need to make sure the read-modify-write
+		 * of Status below isn't perturbed by an interrupt
+		 * or cross-TC access, so we need to do at least a DMT,
+		 * protected by an interrupt-inhibit. But setting IXMT
+		 * also creates a few-cycle window where an IPI could
+		 * be queued and not be detected before potentially
+		 * returning to a WAIT or user-mode loop. It must be
+		 * replayed.
+		 *
+		 * We're in the middle of a context switch, and
+		 * we can't dispatch it directly without trashing
+		 * some registers, so we'll try to detect this unlikely
+		 * case and program a software interrupt in the VPE,
+		 * as would be done for a cross-VPE IPI.  To accomodate
+		 * the handling of that case, we're doing a DVPE instead
+		 * of just a DMT here to protect against other threads.
+		 * This is a lot of cruft to cover a tiny window.
+		 * If you can find a better design, implement it!
+		 *
 		 */
 		mfc0	v0, CP0_TCSTATUS
 		ori	v0, TCSTATUS_IXMT
 		mtc0	v0, CP0_TCSTATUS
 		_ehb
-		DMT	5				# dmt a1
+		DVPE	5				# dvpe a1
 		jal	mips_ihb
 #endif /* CONFIG_MIPS_MT_SMTC */
 		mfc0	a0, CP0_STATUS
@@ -325,17 +342,50 @@
  */
 		LONG_L	v1, PT_TCSTATUS(sp)
 		_ehb
-		mfc0	v0, CP0_TCSTATUS
+		mfc0	a0, CP0_TCSTATUS
 		andi	v1, TCSTATUS_IXMT
-		/* We know that TCStatua.IXMT should be set from above */
-		xori	v0, v0, TCSTATUS_IXMT
-		or	v0, v0, v1
-		mtc0	v0, CP0_TCSTATUS
-		_ehb
-		andi	a1, a1, VPECONTROL_TE
+		bnez	v1, 0f
+
+/*
+ * We'd like to detect any IPIs queued in the tiny window
+ * above and request an software interrupt to service them
+ * when we ERET.
+ *
+ * Computing the offset into the IPIQ array of the executing
+ * TC's IPI queue in-line would be tedious.  We use part of
+ * the TCContext register to hold 16 bits of offset that we
+ * can add in-line to find the queue head.
+ */
+		mfc0	v0, CP0_TCCONTEXT
+		la	a2, IPIQ
+		srl	v0, v0, 16
+		addu	a2, a2, v0
+		LONG_L	v0, 0(a2)
+		beqz	v0, 0f
+/*
+ * If we have a queue, provoke dispatch within the VPE by setting C_SW1
+ */
+		mfc0	v0, CP0_CAUSE
+		ori	v0, v0, C_SW1
+		mtc0	v0, CP0_CAUSE
+0:
+		/*
+		 * This test should really never branch but
+		 * let's be prudent here.  Having atomized
+		 * the shared register modifications, we can
+		 * now EVPE, and must do so before interrupts
+		 * are potentially re-enabled.
+		 */
+		andi	a1, a1, MVPCONTROL_EVP
 		beqz	a1, 1f
-		emt
+		evpe
 1:
+		/* We know that TCStatua.IXMT should be set from above */
+		xori	a0, a0, TCSTATUS_IXMT
+		or	a0, a0, v1
+		mtc0	a0, CP0_TCSTATUS
+		_ehb
+
 		.set	mips0
 #endif /* CONFIG_MIPS_MT_SMTC */
 		LONG_L	v1, PT_EPC(sp)
diff --git a/include/asm-x86/acpi.h b/include/asm-x86/acpi.h
index 635d764dc13e..35d1743b57ac 100644
--- a/include/asm-x86/acpi.h
+++ b/include/asm-x86/acpi.h
@@ -140,6 +140,8 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
 	    boot_cpu_data.x86_model <= 0x05 &&
 	    boot_cpu_data.x86_mask < 0x0A)
 		return 1;
+	else if (boot_cpu_has(X86_FEATURE_AMDC1E))
+		return 1;
 	else
 		return max_cstate;
 }
diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h
index 9489283a4bcf..cfcfb0a806ba 100644
--- a/include/asm-x86/cpufeature.h
+++ b/include/asm-x86/cpufeature.h
@@ -81,6 +81,7 @@
 #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */
 #define X86_FEATURE_11AP	(3*32+19) /* Bad local APIC aka 11AP */
 #define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
+#define X86_FEATURE_AMDC1E	(3*32+21) /* AMD C1E detected */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* Streaming SIMD Extensions-3 */
diff --git a/include/asm-x86/idle.h b/include/asm-x86/idle.h
index d240e5b30a45..cbb649123612 100644
--- a/include/asm-x86/idle.h
+++ b/include/asm-x86/idle.h
@@ -10,4 +10,6 @@ void idle_notifier_register(struct notifier_block *n);
 void enter_idle(void);
 void exit_idle(void);
 
+void c1e_remove_cpu(int cpu);
+
 #endif
diff --git a/include/asm-x86/kgdb.h b/include/asm-x86/kgdb.h
index 484c47554f3b..94d63db10365 100644
--- a/include/asm-x86/kgdb.h
+++ b/include/asm-x86/kgdb.h
@@ -39,12 +39,13 @@ enum regnames {
 	GDB_FS,			/* 14 */
 	GDB_GS,			/* 15 */
 };
+#define NUMREGBYTES		((GDB_GS+1)*4)
 #else /* ! CONFIG_X86_32 */
-enum regnames {
+enum regnames64 {
 	GDB_AX,			/* 0 */
-	GDB_DX,			/* 1 */
+	GDB_BX,			/* 1 */
 	GDB_CX,			/* 2 */
-	GDB_BX,			/* 3 */
+	GDB_DX,			/* 3 */
 	GDB_SI,			/* 4 */
 	GDB_DI,			/* 5 */
 	GDB_BP,			/* 6 */
@@ -58,18 +59,15 @@ enum regnames {
 	GDB_R14,		/* 14 */
 	GDB_R15,		/* 15 */
 	GDB_PC,			/* 16 */
-	GDB_PS,			/* 17 */
 };
-#endif /* CONFIG_X86_32 */
 
-/*
- * Number of bytes of registers:
- */
-#ifdef CONFIG_X86_32
-# define NUMREGBYTES		64
-#else
-# define NUMREGBYTES		((GDB_PS+1)*8)
-#endif
+enum regnames32 {
+	GDB_PS = 34,
+	GDB_CS,
+	GDB_SS,
+};
+#define NUMREGBYTES		((GDB_SS+1)*4)
+#endif /* CONFIG_X86_32 */
 
 static inline void arch_kgdb_breakpoint(void)
 {
diff --git a/include/asm-x86/uaccess_64.h b/include/asm-x86/uaccess_64.h
index 515d4dce96b5..45806d60bcbe 100644
--- a/include/asm-x86/uaccess_64.h
+++ b/include/asm-x86/uaccess_64.h
@@ -7,6 +7,7 @@
 #include <linux/compiler.h>
 #include <linux/errno.h>
 #include <linux/prefetch.h>
+#include <linux/lockdep.h>
 #include <asm/page.h>
 
 /*
diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h
new file mode 100644
index 000000000000..8c0f9505b48c
--- /dev/null
+++ b/include/linux/cnt32_to_63.h
@@ -0,0 +1,80 @@
+/*
+ *  Extend a 32-bit counter to 63 bits
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	December 3, 2006
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_CNT32_TO_63_H__
+#define __LINUX_CNT32_TO_63_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/* this is used only to give gcc a clue about good code generation */
+union cnt32_to_63 {
+	struct {
+#if defined(__LITTLE_ENDIAN)
+		u32 lo, hi;
+#elif defined(__BIG_ENDIAN)
+		u32 hi, lo;
+#endif
+	};
+	u64 val;
+};
+
+
+/**
+ * cnt32_to_63 - Expand a 32-bit counter to a 63-bit counter
+ * @cnt_lo: The low part of the counter
+ *
+ * Many hardware clock counters are only 32 bits wide and therefore have
+ * a relatively short period making wrap-arounds rather frequent.  This
+ * is a problem when implementing sched_clock() for example, where a 64-bit
+ * non-wrapping monotonic value is expected to be returned.
+ *
+ * To overcome that limitation, let's extend a 32-bit counter to 63 bits
+ * in a completely lock free fashion. Bits 0 to 31 of the clock are provided
+ * by the hardware while bits 32 to 62 are stored in memory.  The top bit in
+ * memory is used to synchronize with the hardware clock half-period.  When
+ * the top bit of both counters (hardware and in memory) differ then the
+ * memory is updated with a new value, incrementing it when the hardware
+ * counter wraps around.
+ *
+ * Because a word store in memory is atomic then the incremented value will
+ * always be in synch with the top bit indicating to any potential concurrent
+ * reader if the value in memory is up to date or not with regards to the
+ * needed increment.  And any race in updating the value in memory is harmless
+ * as the same value would simply be stored more than once.
+ *
+ * The only restriction for the algorithm to work properly is that this
+ * code must be executed at least once per each half period of the 32-bit
+ * counter to properly update the state bit in memory. This is usually not a
+ * problem in practice, but if it is then a kernel timer could be scheduled
+ * to manage for this code to be executed often enough.
+ *
+ * Note that the top bit (bit 63) in the returned value should be considered
+ * as garbage.  It is not cleared here because callers are likely to use a
+ * multiplier on the returned value which can get rid of the top bit
+ * implicitly by making the multiplier even, therefore saving on a runtime
+ * clear-bit instruction. Otherwise caller must remember to clear the top
+ * bit explicitly.
+ */
+#define cnt32_to_63(cnt_lo) \
+({ \
+	static volatile u32 __m_cnt_hi; \
+	union cnt32_to_63 __x; \
+	__x.hi = __m_cnt_hi; \
+	__x.lo = (cnt_lo); \
+	if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
+		__m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
+	__x.val; \
+})
+
+#endif
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 6d93dce61cbb..2f245fe63bda 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -47,14 +47,22 @@ enum hrtimer_restart {
  *	HRTIMER_CB_IRQSAFE:		Callback may run in hardirq context
  *	HRTIMER_CB_IRQSAFE_NO_RESTART:	Callback may run in hardirq context and
  *					does not restart the timer
- *	HRTIMER_CB_IRQSAFE_NO_SOFTIRQ:	Callback must run in hardirq context
- *					Special mode for tick emultation
+ *	HRTIMER_CB_IRQSAFE_PERCPU:	Callback must run in hardirq context
+ *					Special mode for tick emulation and
+ *					scheduler timer. Such timers are per
+ *					cpu and not allowed to be migrated on
+ *					cpu unplug.
+ *	HRTIMER_CB_IRQSAFE_UNLOCKED:	Callback should run in hardirq context
+ *					with timer->base lock unlocked
+ *					used for timers which call wakeup to
+ *					avoid lock order problems with rq->lock
  */
 enum hrtimer_cb_mode {
 	HRTIMER_CB_SOFTIRQ,
 	HRTIMER_CB_IRQSAFE,
 	HRTIMER_CB_IRQSAFE_NO_RESTART,
-	HRTIMER_CB_IRQSAFE_NO_SOFTIRQ,
+	HRTIMER_CB_IRQSAFE_PERCPU,
+	HRTIMER_CB_IRQSAFE_UNLOCKED,
 };
 
 /*
@@ -67,9 +75,10 @@ enum hrtimer_cb_mode {
  * 0x02		callback function running
  * 0x04		callback pending (high resolution mode)
  *
- * Special case:
+ * Special cases:
  * 0x03		callback function running and enqueued
  *		(was requeued on another CPU)
+ * 0x09		timer was migrated on CPU hotunplug
  * The "callback function running and enqueued" status is only possible on
  * SMP. It happens for example when a posix timer expired and the callback
  * queued a signal. Between dropping the lock which protects the posix timer
@@ -87,6 +96,7 @@ enum hrtimer_cb_mode {
 #define HRTIMER_STATE_ENQUEUED	0x01
 #define HRTIMER_STATE_CALLBACK	0x02
 #define HRTIMER_STATE_PENDING	0x04
+#define HRTIMER_STATE_MIGRATE	0x08
 
 /**
  * struct hrtimer - the basic hrtimer structure
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 1524829f73f2..6514db8fd2e4 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -366,7 +366,9 @@ enum {
 	/* Currently on a filemark */
 	IDE_AFLAG_FILEMARK		= (1 << 25),
 	/* 0 = no tape is loaded, so we don't rewind after ejecting */
-	IDE_AFLAG_MEDIUM_PRESENT	= (1 << 26)
+	IDE_AFLAG_MEDIUM_PRESENT	= (1 << 26),
+
+	IDE_AFLAG_NO_AUTOCLOSE		= (1 << 27),
 };
 
 struct ide_drive_s {
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 655ea0d1ee14..b2f944468313 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -141,6 +141,10 @@ enum {
 	MLX4_STAT_RATE_OFFSET	= 5
 };
 
+enum {
+	MLX4_MTT_FLAG_PRESENT		= 1
+};
+
 static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor)
 {
 	return (major << 32) | (minor << 16) | subminor;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index c0e14008a3c2..98dc6243a706 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -534,7 +534,7 @@ extern void pci_sort_breadthfirst(void);
 #ifdef CONFIG_PCI_LEGACY
 struct pci_dev __deprecated *pci_find_device(unsigned int vendor,
 					     unsigned int device,
-					     const struct pci_dev *from);
+					     struct pci_dev *from);
 struct pci_dev __deprecated *pci_find_slot(unsigned int bus,
 					   unsigned int devfn);
 #endif /* CONFIG_PCI_LEGACY */
@@ -550,7 +550,7 @@ struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device,
 				struct pci_dev *from);
 struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device,
 				unsigned int ss_vendor, unsigned int ss_device,
-				const struct pci_dev *from);
+				struct pci_dev *from);
 struct pci_dev *pci_get_slot(struct pci_bus *bus, unsigned int devfn);
 struct pci_dev *pci_get_bus_and_slot(unsigned int bus, unsigned int devfn);
 struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from);
@@ -816,7 +816,7 @@ _PCI_NOP_ALL(write,)
 
 static inline struct pci_dev *pci_find_device(unsigned int vendor,
 					      unsigned int device,
-					      const struct pci_dev *from)
+					      struct pci_dev *from)
 {
 	return NULL;
 }
@@ -838,7 +838,7 @@ static inline struct pci_dev *pci_get_subsys(unsigned int vendor,
 					     unsigned int device,
 					     unsigned int ss_vendor,
 					     unsigned int ss_device,
-					     const struct pci_dev *from)
+					     struct pci_dev *from)
 {
 	return NULL;
 }
diff --git a/include/linux/ramfs.h b/include/linux/ramfs.h
index b160fb18e8d6..37aaf2b39863 100644
--- a/include/linux/ramfs.h
+++ b/include/linux/ramfs.h
@@ -6,6 +6,7 @@ extern int ramfs_get_sb(struct file_system_type *fs_type,
 	 int flags, const char *dev_name, void *data, struct vfsmount *mnt);
 
 #ifndef CONFIG_MMU
+extern int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize);
 extern unsigned long ramfs_nommu_get_unmapped_area(struct file *file,
 						   unsigned long addr,
 						   unsigned long len,
diff --git a/include/linux/smb.h b/include/linux/smb.h
index caa43b2370cb..82fefddc5987 100644
--- a/include/linux/smb.h
+++ b/include/linux/smb.h
@@ -11,7 +11,9 @@
 
 #include <linux/types.h>
 #include <linux/magic.h>
+#ifdef __KERNEL__
 #include <linux/time.h>
+#endif
 
 enum smb_protocol { 
 	SMB_PROTOCOL_NONE, 
diff --git a/include/linux/stacktrace.h b/include/linux/stacktrace.h
index 5da9794b2d78..b106fd8e0d5c 100644
--- a/include/linux/stacktrace.h
+++ b/include/linux/stacktrace.h
@@ -1,6 +1,8 @@
 #ifndef __LINUX_STACKTRACE_H
 #define __LINUX_STACKTRACE_H
 
+struct task_struct;
+
 #ifdef CONFIG_STACKTRACE
 struct stack_trace {
 	unsigned int nr_entries, max_entries;
diff --git a/include/net/9p/9p.h b/include/net/9p/9p.h
index b3d3e27c6299..c3626c0ba9d3 100644
--- a/include/net/9p/9p.h
+++ b/include/net/9p/9p.h
@@ -596,4 +596,5 @@ int p9_idpool_check(int id, struct p9_idpool *p);
 int p9_error_init(void);
 int p9_errstr2errno(char *, int);
 int p9_trans_fd_init(void);
+void p9_trans_fd_exit(void);
 #endif /* NET_9P_H */
diff --git a/include/net/9p/transport.h b/include/net/9p/transport.h
index 0db3a4038dc0..3ca737120a90 100644
--- a/include/net/9p/transport.h
+++ b/include/net/9p/transport.h
@@ -26,6 +26,8 @@
 #ifndef NET_9P_TRANSPORT_H
 #define NET_9P_TRANSPORT_H
 
+#include <linux/module.h>
+
 /**
  * enum p9_trans_status - different states of underlying transports
  * @Connected: transport is connected and healthy
@@ -91,9 +93,12 @@ struct p9_trans_module {
 	int maxsize;		/* max message size of transport */
 	int def;		/* this transport should be default */
 	struct p9_trans * (*create)(const char *, char *, int, unsigned char);
+	struct module *owner;
 };
 
 void v9fs_register_trans(struct p9_trans_module *m);
-struct p9_trans_module *v9fs_match_trans(const substring_t *name);
-struct p9_trans_module *v9fs_default_trans(void);
+void v9fs_unregister_trans(struct p9_trans_module *m);
+struct p9_trans_module *v9fs_get_trans_by_name(const substring_t *name);
+struct p9_trans_module *v9fs_get_default_trans(void);
+void v9fs_put_trans(struct p9_trans_module *m);
 #endif /* NET_9P_TRANSPORT_H */
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index 24811732bdb2..029a54a02396 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -227,6 +227,9 @@ struct sctp_chunk *sctp_make_abort_violation(const struct sctp_association *,
 				   const struct sctp_chunk *,
 				   const __u8 *,
 				   const size_t );
+struct sctp_chunk *sctp_make_violation_paramlen(const struct sctp_association *,
+				   const struct sctp_chunk *,
+				   struct sctp_paramhdr *);
 struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *,
 				  const struct sctp_transport *,
 				  const void *payload,