[MIPS] Pb1550 code style cleanup

Fix a few errors and warnings given by checkpatch.pl:

- macros with complex values not enclosed in parentheses;

- printk() without KERN_* facility level;

- unnecessary braces for single-statement block;

- using simple_strtol() where strict_strtol() could be used.

In addition to these changes, also do the following:

- replace numeric literals with the matching macros;

- properly indent the code and the array initializers;

- insert spaces between operator and its operands, also remove excess spaces
  there;

- remove space after the type cast's closing parenthesis;

- insert missing space before closing brace in the array initializers;

- replace spaces after the macro name with tabs in the #define directives, also
  sometimes insert space there for better looks;

- remove excess tabs after the macro name in the #define directives;

- fix typos/errors, capitalize acronyms, etc. in the comments;

- make the multi-line comment style consistent with the kernel style elsewhere
  by adding empty first line;

- update MontaVista copyright;

- remove Pete Popov's old email address...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 26 insertions, 25 deletions

diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h
index c2ab0e2df4ae..6704a11497db 100644
--- a/include/asm-mips/mach-pb1x00/pb1550.h
+++ b/include/asm-mips/mach-pb1x00/pb1550.h
@@ -30,15 +30,15 @@
 #include <linux/types.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
 
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC3_RX
 
-#define SPI_PSC_BASE        PSC0_BASE_ADDR
-#define AC97_PSC_BASE       PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE      PSC2_BASE_ADDR
-#define I2S_PSC_BASE        PSC3_BASE_ADDR
+#define SPI_PSC_BASE		PSC0_BASE_ADDR
+#define AC97_PSC_BASE		PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE		PSC2_BASE_ADDR
+#define I2S_PSC_BASE		PSC3_BASE_ADDR
 
 #define BCSR_PHYS_ADDR 0xAF000000
 
@@ -129,12 +129,12 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
 #define BCSR_SYSTEM_POWEROFF	0x4000
 #define BCSR_SYSTEM_RESET	0x8000
 
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
 
 /* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
-	((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
 
 #if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
 #define PB1550_BOTH_BANKS
@@ -144,16 +144,17 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
 #define PB1550_USER_ONLY
 #endif
 
-/* Timing values as described in databook, * ns value stripped of
+/*
+ * Timing values as described in databook, * ns value stripped of
  * lower 2 bits.
  * These defines are here rather than an SOC1550 generic file because
  * the parts chosen on another board may be different and may require
  * different timings.
  */
-#define NAND_T_H			(18 >> 2)
-#define NAND_T_PUL			(30 >> 2)
-#define NAND_T_SU			(30 >> 2)
-#define NAND_T_WH			(30 >> 2)
+#define NAND_T_H		(18 >> 2)
+#define NAND_T_PUL		(30 >> 2)
+#define NAND_T_SU		(30 >> 2)
+#define NAND_T_WH		(30 >> 2)
 
 /* Bitfield shift amounts */
 #define NAND_T_H_SHIFT		0
@@ -161,16 +162,16 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
 #define NAND_T_SU_SHIFT		8
 #define NAND_T_WH_SHIFT		12
 
-#define NAND_TIMING	((NAND_T_H   & 0xF)	<< NAND_T_H_SHIFT)   | \
-			((NAND_T_PUL & 0xF)	<< NAND_T_PUL_SHIFT) | \
-			((NAND_T_SU  & 0xF)	<< NAND_T_SU_SHIFT)  | \
-			((NAND_T_WH  & 0xF)	<< NAND_T_WH_SHIFT)
+#define NAND_TIMING	(((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
+			 ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+			 ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
+			 ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
 
 #define NAND_CS 1
 
-/* should be done by yamon */
-#define NAND_STCFG  0x00400005 /* 8-bit NAND */
-#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
-#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
+/* Should be done by YAMON */
+#define NAND_STCFG	0x00400005 /* 8-bit NAND */
+#define NAND_STTIME	0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR	0x12000FFF /* physical address 0x20000000 */
 
 #endif /* __ASM_PB1550_H */