Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "Here are the main updates for SoC support (besides DT additions) for
  ARM 32- and 64-bit platforms. The branch also contains defconfig
  updates to turn on drivers and options as needed on the various
  platforms.

  The largest parts of the delta are from cleanups moving platform data
  and board file setup of TI platforms to ti-sysc bus drivers. There are
  also some sweeping changes of eeprom and nand setup on Davinci, i.MX
  and other platforms.

  Samsung is removing support for Exynos5440, which was an oddball SoC
  that hasn't been seen much use in designs.

  Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).

  Linus Walleij is also removing support for ux500 (Sony Ericsson)
  U8540/9540 SoCs that never made it to significant mass production and
  products"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  MAINTAINERS: add NXP linux team maillist as i.MX reviewer
  ARM: stm32: Don't select DMA unconditionally on STM32MP157C
  arm64: defconfig: Enable PCIe on msm8996 and db820c
  ARM: pxa3xx: enable external wakeup pins
  ARM: pxa: stargate2: use device properties for at24 eeprom
  arm64: defconfig: Enable HISILICON_LPC
  arm64: defconfig: enable drivers for Poplar support
  arm64: defconfig: Enable UFS on msm8996
  ARM: berlin: switch to SPDX license identifier
  arm: berlin: remove non-necessary flush_cache_all()
  ARM: berlin: extend BG2CD Kconfig entry
  OMAP: CLK: CLKSRC: Add suspend resume hooks
  ARM: AM43XX: Add functions to save/restore am43xx control registers
  ASoC: ams_delta: use GPIO lookup table
  ARM: OMAP1: ams-delta: add GPIO lookup tables
  bus: ti-sysc: Fix optional clocks array access
  ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
  ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
  ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
  ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
  ...

6 files changed, 76 insertions, 21 deletions

diff --git a/include/dt-bindings/power/r8a77470-sysc.h b/include/dt-bindings/power/r8a77470-sysc.h
new file mode 100644
index 000000000000..8bf4db187c31
--- /dev/null
+++ b/include/dt-bindings/power/r8a77470-sysc.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A77470_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A77470_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A77470_PD_CA7_CPU0		 5
+#define R8A77470_PD_CA7_CPU1		 6
+#define R8A77470_PD_SGX			20
+#define R8A77470_PD_CA7_SCU		21
+
+/* Always-on power area */
+#define R8A77470_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A77470_SYSC_H__ */
diff --git a/include/dt-bindings/power/r8a77990-sysc.h b/include/dt-bindings/power/r8a77990-sysc.h
new file mode 100644
index 000000000000..944d85beec15
--- /dev/null
+++ b/include/dt-bindings/power/r8a77990-sysc.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A77990_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A77990_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A77990_PD_CA53_CPU0		5
+#define R8A77990_PD_CA53_CPU1		6
+#define R8A77990_PD_CR7			13
+#define R8A77990_PD_A3VC		14
+#define R8A77990_PD_3DG_A		17
+#define R8A77990_PD_3DG_B		18
+#define R8A77990_PD_CA53_SCU		21
+#define R8A77990_PD_A2VC1		26
+
+/* Always-on power area */
+#define R8A77990_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A77990_SYSC_H__ */
diff --git a/include/linux/platform_data/media/ir-rx51.h b/include/linux/platform_data/media/ir-rx51.h
deleted file mode 100644
index 9d127aa648e7..000000000000
--- a/include/linux/platform_data/media/ir-rx51.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _IR_RX51_H
-#define _IR_RX51_H
-
-struct ir_rx51_platform_data {
-	int(*set_max_mpu_wakeup_lat)(struct device *dev, long t);
-};
-
-#endif
diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h
index f1a2cf655bdb..1bbfa27cccb4 100644
--- a/include/linux/platform_data/mtd-davinci.h
+++ b/include/linux/platform_data/mtd-davinci.h
@@ -56,6 +56,16 @@ struct davinci_nand_pdata {		/* platform_data */
 	uint32_t		mask_ale;
 	uint32_t		mask_cle;
 
+	/*
+	 * 0-indexed chip-select number of the asynchronous
+	 * interface to which the NAND device has been connected.
+	 *
+	 * So, if you have NAND connected to CS3 of DA850, you
+	 * will pass '1' here. Since the asynchronous interface
+	 * on DA850 starts from CS2.
+	 */
+	uint32_t		core_chipsel;
+
 	/* for packages using two chipselects */
 	uint32_t		mask_chipsel;
 
diff --git a/include/linux/platform_data/spi-imx.h b/include/linux/platform_data/spi-imx.h
index 6f012fefa1a2..328f670d10bd 100644
--- a/include/linux/platform_data/spi-imx.h
+++ b/include/linux/platform_data/spi-imx.h
@@ -5,24 +5,29 @@
 
 /*
  * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio
- *              pins, numbers < 0 mean internal CSPI chipselects according
- *              to MXC_SPI_CS(). Normally you want to use gpio based chip
- *              selects as the CSPI module tries to be intelligent about
- *              when to assert the chipselect: The CSPI module deasserts the
- *              chipselect once it runs out of input data. The other problem
- *              is that it is not possible to mix between high active and low
- *              active chipselects on one single bus using the internal
- *              chipselects. Unfortunately Freescale decided to put some
+ * @chipselect: Array of chipselects for this master or NULL.  Numbers >= 0
+ *              mean GPIO pins, -ENOENT means internal CSPI chipselect
+ *              matching the position in the array.  E.g., if chipselect[1] =
+ *              -ENOENT then a SPI slave using chip select 1 will use the
+ *              native SS1 line of the CSPI.  Omitting the array will use
+ *              all native chip selects.
+
+ *              Normally you want to use gpio based chip selects as the CSPI
+ *              module tries to be intelligent about when to assert the
+ *              chipselect:  The CSPI module deasserts the chipselect once it
+ *              runs out of input data.  The other problem is that it is not
+ *              possible to mix between high active and low active chipselects
+ *              on one single bus using the internal chipselects.
+ *              Unfortunately, on some SoCs, Freescale decided to put some
  *              chipselects on dedicated pins which are not usable as gpios,
  *              so we have to support the internal chipselects.
- * @num_chipselect: ARRAY_SIZE(chipselect)
+ *
+ * @num_chipselect: If @chipselect is specified, ARRAY_SIZE(chipselect),
+ *                  otherwise the number of native chip selects.
  */
 struct spi_imx_master {
 	int	*chipselect;
 	int	num_chipselect;
 };
 
-#define MXC_SPI_CS(no)	((no) - 32)
-
 #endif /* __MACH_SPI_H_*/
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
index 80ce28d40832..990aad477458 100644
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -45,6 +45,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_RESOURCE_PROVIDER	BIT(9)
 #define SYSC_QUIRK_LEGACY_IDLE		BIT(8)
 #define SYSC_QUIRK_RESET_STATUS		BIT(7)
 #define SYSC_QUIRK_NO_IDLE_ON_INIT	BIT(6)