Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - Fix ASPM link_state teardown on removal (Lukas Wunner)

 - Fix misleading _OSC ASPM message (Sinan Kaya)

 - Make _OSC optional for PCI (Sinan Kaya)

 - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
   (Patrick Talbert)

 - Remove x86 and arm64 node-local allocation for host bridge structures
   (Punit Agrawal)

 - Pay attention to device-specific _PXM node values (Jonathan Cameron)

 - Support new Immediate Readiness bit (Felipe Balbi)

 - Differentiate between pciehp surprise and safe removal (Lukas Wunner)

 - Remove unnecessary pciehp includes (Lukas Wunner)

 - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)

 - Tolerate PCIe Slot Presence Detect being hardwired to zero to
   workaround broken hardware, e.g., the Wilocity switch/wireless device
   (Lukas Wunner)

 - Unify pciehp controller & slot structs (Lukas Wunner)

 - Constify hotplug_slot_ops (Lukas Wunner)

 - Drop hotplug_slot_info (Lukas Wunner)

 - Embed hotplug_slot struct into users instead of allocating it
   separately (Lukas Wunner)

 - Initialize PCIe port service drivers directly instead of relying on
   initcall ordering (Keith Busch)

 - Restore PCI config state after a slot reset (Keith Busch)

 - Save/restore DPC config state along with other PCI config state
   (Keith Busch)

 - Reference count devices during AER handling to avoid race issue with
   concurrent hot removal (Keith Busch)

 - If an Upstream Port reports ERR_FATAL, don't try to read the Port's
   config space because it is probably unreachable (Keith Busch)

 - During error handling, use slot-specific reset instead of secondary
   bus reset to avoid link up/down issues on hotplug ports (Keith Busch)

 - Restore previous AER/DPC handling that does not remove and
   re-enumerate devices on ERR_FATAL (Keith Busch)

 - Notify all drivers that may be affected by error recovery resets
   (Keith Busch)

 - Always generate error recovery uevents, even if a driver doesn't have
   error callbacks (Keith Busch)

 - Make PCIe link active reporting detection generic (Keith Busch)

 - Support D3cold in PCIe hierarchies during system sleep and runtime,
   including hotplug and Thunderbolt ports (Mika Westerberg)

 - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
   are empty or occupied (Jon Derrick)

 - Remove duplicated include from pci/pcie/err.c and unused variable
   from cpqphp (YueHaibing)

 - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
   Pawandeep)

 - Uninline PCI bus accessors for better ftracing (Keith Busch)

 - Remove unused AER Root Port .error_resume method (Keith Busch)

 - Use kfifo in AER instead of a local version (Keith Busch)

 - Use threaded IRQ in AER bottom half (Keith Busch)

 - Use managed resources in AER core (Keith Busch)

 - Reuse pcie_port_find_device() for AER injection (Keith Busch)

 - Abstract AER interrupt handling to disconnect error injection (Keith
   Busch)

 - Refactor AER injection callbacks to simplify future improvments
   (Keith Busch)

 - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)

 - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)

 - Add switch fall-through annotations (Gustavo A. R. Silva)

 - Remove unused Switchtec quirk variable (Joshua Abraham)

 - Fix pci.c kernel-doc warning (Randy Dunlap)

 - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)

 - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)

 - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
   useless dmesg errors (Logan Gunthorpe)

 - Update Switchtec NTB documentation (Wesley Yung)

 - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)

 - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)

 - Add PCI support for peer-to-peer DMA (Logan Gunthorpe)

 - Add sysfs group for PCI peer-to-peer memory statistics (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
   Gunthorpe)

 - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA driver writer's documentation (Logan
   Gunthorpe)

 - Add block layer flag to indicate driver support for PCI peer-to-peer
   DMA (Logan Gunthorpe)

 - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
   memory (Logan Gunthorpe)

 - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
   Gunthorpe)

 - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
   Gunthorpe)

 - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
   Christoph Hellwig, Logan Gunthorpe)

 - Cache VF config space size to optimize enumeration of many VFs
   (KarimAllah Ahmed)

 - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)

 - Fix VMD AERSID quirk Device ID matching (Jon Derrick)

 - Fix Cadence PHY handling during probe (Alan Douglas)

 - Signal Cadence Endpoint interrupts via AXI region 0 instead of last
   region (Alan Douglas)

 - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
   Douglas)

 - Remove redundant controller tests for "device_type == pci" (Rob
   Herring)

 - Document R-Car E3 (R8A77990) bindings (Tho Vu)

 - Add device tree support for R-Car r8a7744 (Biju Das)

 - Drop unused mvebu PCIe capability code (Thomas Petazzoni)

 - Add shared PCI bridge emulation code (Thomas Petazzoni)

 - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)

 - Add aardvark Root Port emulation (Thomas Petazzoni)

 - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)

 - Add initial power management for i.MX7 (Leonard Crestez)

 - Add PME_Turn_Off support for i.MX7 (Leonard Crestez)

 - Fix qcom runtime power management error handling (Bjorn Andersson)

 - Update TI dra7xx unaligned access errata workaround for host mode as
   well as endpoint mode (Vignesh R)

 - Fix kirin section mismatch warning (Nathan Chancellor)

 - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)

 - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)

 - Update Keystone to use MRRS quirk for host bridge instead of open
   coding (Kishon Vijay Abraham I)

 - Refactor Keystone link establishment (Kishon Vijay Abraham I)

 - Simplify and speed up Keystone link training (Kishon Vijay Abraham I)

 - Remove unused Keystone host_init argument (Kishon Vijay Abraham I)

 - Merge Keystone driver files into one (Kishon Vijay Abraham I)

 - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
   Abraham I)

 - Rename Keystone functions for uniformity (Kishon Vijay Abraham I)

 - Add Keystone device control module DT binding (Kishon Vijay Abraham
   I)

 - Use SYSCON API to get Keystone control module device IDs (Kishon
   Vijay Abraham I)

 - Clean up Keystone PHY handling (Kishon Vijay Abraham I)

 - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)

 - Clean up Keystone config space access checks (Kishon Vijay Abraham I)

 - Get Keystone outbound window count from DT (Kishon Vijay Abraham I)

 - Clean up Keystone outbound window configuration (Kishon Vijay Abraham
   I)

 - Clean up Keystone DBI setup (Kishon Vijay Abraham I)

 - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)

 - Fix Keystone IRQ status checking (Kishon Vijay Abraham I)

 - Add debug messages for all Keystone errors (Kishon Vijay Abraham I)

 - Clean up Keystone includes and macros (Kishon Vijay Abraham I)

 - Fix Mediatek unchecked return value from devm_pci_remap_iospace()
   (Gustavo A. R. Silva)

 - Fix Mediatek endpoint/port matching logic (Honghui Zhang)

 - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
   Zhang)

 - Remove redundant Mediatek PM domain check (Honghui Zhang)

 - Convert Mediatek to pci_host_probe() (Honghui Zhang)

 - Fix Mediatek MSI enablement (Honghui Zhang)

 - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)

 - Add Mediatek loadable module support (Honghui Zhang)

 - Detach VMD resources after stopping root bus to prevent orphan
   resources (Jon Derrick)

 - Convert pcitest build process to that used by other tools (iio, perf,
   etc) (Gustavo Pimentel)

* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI/AER: Refactor error injection fallbacks
  PCI/AER: Abstract AER interrupt handling
  PCI/AER: Reuse existing pcie_port_find_device() interface
  PCI/AER: Use managed resource allocations
  PCI: pcie: Remove redundant 'default n' from Kconfig
  PCI: aardvark: Implement emulated root PCI bridge config space
  PCI: mvebu: Convert to PCI emulated bridge config space
  PCI: mvebu: Drop unused PCI express capability code
  PCI: Introduce PCI bridge emulated config space common logic
  PCI: vmd: Detach resources after stopping root bus
  nvmet: Optionally use PCI P2P memory
  nvmet: Introduce helper functions to allocate and free request SGLs
  nvme-pci: Add support for P2P memory in requests
  nvme-pci: Use PCI p2pmem subsystem to manage the CMB
  IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
  block: Add PCI P2P flag for request queue
  PCI/P2PDMA: Add P2P DMA driver writer's documentation
  docs-rst: Add a new directory for PCI documentation
  PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
  PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
  ...

13 files changed, 172 insertions, 73 deletions

diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 53600f527a70..0300374101cd 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -346,10 +346,16 @@ struct acpi_device_physical_node {
 	bool put_online:1;
 };
 
+struct acpi_device_properties {
+	const guid_t *guid;
+	const union acpi_object *properties;
+	struct list_head list;
+};
+
 /* ACPI Device Specific Data (_DSD) */
 struct acpi_device_data {
 	const union acpi_object *pointer;
-	const union acpi_object *properties;
+	struct list_head properties;
 	const union acpi_object *of_compatible;
 	struct list_head subnodes;
 };
diff --git a/include/dt-bindings/reset/imx7-reset.h b/include/dt-bindings/reset/imx7-reset.h
index 63948170c7b2..31b3f87dde9a 100644
--- a/include/dt-bindings/reset/imx7-reset.h
+++ b/include/dt-bindings/reset/imx7-reset.h
@@ -56,7 +56,9 @@
 #define IMX7_RESET_DDRC_PRST		23
 #define IMX7_RESET_DDRC_CORE_RST	24
 
-#define IMX7_RESET_NUM			25
+#define IMX7_RESET_PCIE_CTRL_APPS_TURNOFF 25
+
+#define IMX7_RESET_NUM			26
 
 #endif
 
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index af4628979d13..ed80f147bd50 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -1072,6 +1072,15 @@ static inline int acpi_node_get_property_reference(
 		NR_FWNODE_REFERENCE_ARGS, args);
 }
 
+static inline bool acpi_dev_has_props(const struct acpi_device *adev)
+{
+	return !list_empty(&adev->data.properties);
+}
+
+struct acpi_device_properties *
+acpi_data_add_props(struct acpi_device_data *data, const guid_t *guid,
+		    const union acpi_object *properties);
+
 int acpi_node_prop_get(const struct fwnode_handle *fwnode, const char *propname,
 		       void **valptr);
 int acpi_dev_prop_read_single(struct acpi_device *adev,
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 61207560e826..7d423721b327 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -704,6 +704,7 @@ struct request_queue {
 #define QUEUE_FLAG_REGISTERED  26	/* queue has been registered to a disk */
 #define QUEUE_FLAG_SCSI_PASSTHROUGH 27	/* queue supports SCSI commands */
 #define QUEUE_FLAG_QUIESCED    28	/* queue has been quiesced */
+#define QUEUE_FLAG_PCI_P2PDMA  29	/* device supports PCI p2p requests */
 
 #define QUEUE_FLAG_DEFAULT	((1 << QUEUE_FLAG_IO_STAT) |		\
 				 (1 << QUEUE_FLAG_SAME_COMP)	|	\
@@ -736,6 +737,8 @@ bool blk_queue_flag_test_and_clear(unsigned int flag, struct request_queue *q);
 #define blk_queue_dax(q)	test_bit(QUEUE_FLAG_DAX, &(q)->queue_flags)
 #define blk_queue_scsi_passthrough(q)	\
 	test_bit(QUEUE_FLAG_SCSI_PASSTHROUGH, &(q)->queue_flags)
+#define blk_queue_pci_p2pdma(q)	\
+	test_bit(QUEUE_FLAG_PCI_P2PDMA, &(q)->queue_flags)
 
 #define blk_noretry_request(rq) \
 	((rq)->cmd_flags & (REQ_FAILFAST_DEV|REQ_FAILFAST_TRANSPORT| \
diff --git a/include/linux/memremap.h b/include/linux/memremap.h
index f91f9e763557..0ac69ddf5fc4 100644
--- a/include/linux/memremap.h
+++ b/include/linux/memremap.h
@@ -53,11 +53,16 @@ struct vmem_altmap {
  * wakeup event whenever a page is unpinned and becomes idle. This
  * wakeup is used to coordinate physical address space management (ex:
  * fs truncate/hole punch) vs pinned pages (ex: device dma).
+ *
+ * MEMORY_DEVICE_PCI_P2PDMA:
+ * Device memory residing in a PCI BAR intended for use with Peer-to-Peer
+ * transactions.
  */
 enum memory_type {
 	MEMORY_DEVICE_PRIVATE = 1,
 	MEMORY_DEVICE_PUBLIC,
 	MEMORY_DEVICE_FS_DAX,
+	MEMORY_DEVICE_PCI_P2PDMA,
 };
 
 /*
@@ -120,6 +125,7 @@ struct dev_pagemap {
 	struct device *dev;
 	void *data;
 	enum memory_type type;
+	u64 pci_p2pdma_bus_offset;
 };
 
 #ifdef CONFIG_ZONE_DEVICE
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 0416a7204be3..daa2b8f1e9a8 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -890,6 +890,19 @@ static inline bool is_device_public_page(const struct page *page)
 		page->pgmap->type == MEMORY_DEVICE_PUBLIC;
 }
 
+#ifdef CONFIG_PCI_P2PDMA
+static inline bool is_pci_p2pdma_page(const struct page *page)
+{
+	return is_zone_device_page(page) &&
+		page->pgmap->type == MEMORY_DEVICE_PCI_P2PDMA;
+}
+#else /* CONFIG_PCI_P2PDMA */
+static inline bool is_pci_p2pdma_page(const struct page *page)
+{
+	return false;
+}
+#endif /* CONFIG_PCI_P2PDMA */
+
 #else /* CONFIG_DEV_PAGEMAP_OPS */
 static inline void dev_pagemap_get_ops(void)
 {
@@ -913,6 +926,11 @@ static inline bool is_device_public_page(const struct page *page)
 {
 	return false;
 }
+
+static inline bool is_pci_p2pdma_page(const struct page *page)
+{
+	return false;
+}
 #endif /* CONFIG_DEV_PAGEMAP_OPS */
 
 static inline void get_page(struct page *page)
diff --git a/include/linux/pci-dma-compat.h b/include/linux/pci-dma-compat.h
index c3f1b44ade29..cb1adf0b78a9 100644
--- a/include/linux/pci-dma-compat.h
+++ b/include/linux/pci-dma-compat.h
@@ -119,29 +119,11 @@ static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
 {
 	return dma_set_coherent_mask(&dev->dev, mask);
 }
-
-static inline int pci_set_dma_max_seg_size(struct pci_dev *dev,
-					   unsigned int size)
-{
-	return dma_set_max_seg_size(&dev->dev, size);
-}
-
-static inline int pci_set_dma_seg_boundary(struct pci_dev *dev,
-					   unsigned long mask)
-{
-	return dma_set_seg_boundary(&dev->dev, mask);
-}
 #else
 static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
 { return -EIO; }
 static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
 { return -EIO; }
-static inline int pci_set_dma_max_seg_size(struct pci_dev *dev,
-					   unsigned int size)
-{ return -EIO; }
-static inline int pci_set_dma_seg_boundary(struct pci_dev *dev,
-					   unsigned long mask)
-{ return -EIO; }
 #endif
 
 #endif
diff --git a/include/linux/pci-dma.h b/include/linux/pci-dma.h
deleted file mode 100644
index 0f7aa7353ca3..000000000000
--- a/include/linux/pci-dma.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_PCI_DMA_H
-#define _LINUX_PCI_DMA_H
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)   DEFINE_DMA_UNMAP_LEN(LEN_NAME);
-#define pci_unmap_addr             dma_unmap_addr
-#define pci_unmap_addr_set         dma_unmap_addr_set
-#define pci_unmap_len              dma_unmap_len
-#define pci_unmap_len_set          dma_unmap_len_set
-
-#endif
diff --git a/include/linux/pci-p2pdma.h b/include/linux/pci-p2pdma.h
new file mode 100644
index 000000000000..bca9bc3e5be7
--- /dev/null
+++ b/include/linux/pci-p2pdma.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * PCI Peer 2 Peer DMA support.
+ *
+ * Copyright (c) 2016-2018, Logan Gunthorpe
+ * Copyright (c) 2016-2017, Microsemi Corporation
+ * Copyright (c) 2017, Christoph Hellwig
+ * Copyright (c) 2018, Eideticom Inc.
+ */
+
+#ifndef _LINUX_PCI_P2PDMA_H
+#define _LINUX_PCI_P2PDMA_H
+
+#include <linux/pci.h>
+
+struct block_device;
+struct scatterlist;
+
+#ifdef CONFIG_PCI_P2PDMA
+int pci_p2pdma_add_resource(struct pci_dev *pdev, int bar, size_t size,
+		u64 offset);
+int pci_p2pdma_distance_many(struct pci_dev *provider, struct device **clients,
+			     int num_clients, bool verbose);
+bool pci_has_p2pmem(struct pci_dev *pdev);
+struct pci_dev *pci_p2pmem_find_many(struct device **clients, int num_clients);
+void *pci_alloc_p2pmem(struct pci_dev *pdev, size_t size);
+void pci_free_p2pmem(struct pci_dev *pdev, void *addr, size_t size);
+pci_bus_addr_t pci_p2pmem_virt_to_bus(struct pci_dev *pdev, void *addr);
+struct scatterlist *pci_p2pmem_alloc_sgl(struct pci_dev *pdev,
+					 unsigned int *nents, u32 length);
+void pci_p2pmem_free_sgl(struct pci_dev *pdev, struct scatterlist *sgl);
+void pci_p2pmem_publish(struct pci_dev *pdev, bool publish);
+int pci_p2pdma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+		      enum dma_data_direction dir);
+int pci_p2pdma_enable_store(const char *page, struct pci_dev **p2p_dev,
+			    bool *use_p2pdma);
+ssize_t pci_p2pdma_enable_show(char *page, struct pci_dev *p2p_dev,
+			       bool use_p2pdma);
+#else /* CONFIG_PCI_P2PDMA */
+static inline int pci_p2pdma_add_resource(struct pci_dev *pdev, int bar,
+		size_t size, u64 offset)
+{
+	return -EOPNOTSUPP;
+}
+static inline int pci_p2pdma_distance_many(struct pci_dev *provider,
+	struct device **clients, int num_clients, bool verbose)
+{
+	return -1;
+}
+static inline bool pci_has_p2pmem(struct pci_dev *pdev)
+{
+	return false;
+}
+static inline struct pci_dev *pci_p2pmem_find_many(struct device **clients,
+						   int num_clients)
+{
+	return NULL;
+}
+static inline void *pci_alloc_p2pmem(struct pci_dev *pdev, size_t size)
+{
+	return NULL;
+}
+static inline void pci_free_p2pmem(struct pci_dev *pdev, void *addr,
+		size_t size)
+{
+}
+static inline pci_bus_addr_t pci_p2pmem_virt_to_bus(struct pci_dev *pdev,
+						    void *addr)
+{
+	return 0;
+}
+static inline struct scatterlist *pci_p2pmem_alloc_sgl(struct pci_dev *pdev,
+		unsigned int *nents, u32 length)
+{
+	return NULL;
+}
+static inline void pci_p2pmem_free_sgl(struct pci_dev *pdev,
+		struct scatterlist *sgl)
+{
+}
+static inline void pci_p2pmem_publish(struct pci_dev *pdev, bool publish)
+{
+}
+static inline int pci_p2pdma_map_sg(struct device *dev,
+		struct scatterlist *sg, int nents, enum dma_data_direction dir)
+{
+	return 0;
+}
+static inline int pci_p2pdma_enable_store(const char *page,
+		struct pci_dev **p2p_dev, bool *use_p2pdma)
+{
+	*use_p2pdma = false;
+	return 0;
+}
+static inline ssize_t pci_p2pdma_enable_show(char *page,
+		struct pci_dev *p2p_dev, bool use_p2pdma)
+{
+	return sprintf(page, "none\n");
+}
+#endif /* CONFIG_PCI_P2PDMA */
+
+
+static inline int pci_p2pdma_distance(struct pci_dev *provider,
+	struct device *client, bool verbose)
+{
+	return pci_p2pdma_distance_many(provider, &client, 1, verbose);
+}
+
+static inline struct pci_dev *pci_p2pmem_find(struct device *client)
+{
+	return pci_p2pmem_find_many(&client, 1);
+}
+
+#endif /* _LINUX_PCI_P2P_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 2c4755032475..11c71c4ecf75 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -281,6 +281,7 @@ struct pcie_link_state;
 struct pci_vpd;
 struct pci_sriov;
 struct pci_ats;
+struct pci_p2pdma;
 
 /* The pci_dev structure describes PCI devices */
 struct pci_dev {
@@ -325,6 +326,7 @@ struct pci_dev {
 	pci_power_t	current_state;	/* Current operating state. In ACPI,
 					   this is D0-D3, D0 being fully
 					   functional, and D3 being off. */
+	unsigned int	imm_ready:1;	/* Supports Immediate Readiness */
 	u8		pm_cap;		/* PM capability offset */
 	unsigned int	pme_support:5;	/* Bitmask of states from which PME#
 					   can be generated */
@@ -402,6 +404,7 @@ struct pci_dev {
 	unsigned int	has_secondary_link:1;
 	unsigned int	non_compliant_bars:1;	/* Broken BARs; ignore them */
 	unsigned int	is_probed:1;		/* Device probing in progress */
+	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
 	pci_dev_flags_t dev_flags;
 	atomic_t	enable_cnt;	/* pci_enable_device has been called */
 
@@ -439,6 +442,9 @@ struct pci_dev {
 #ifdef CONFIG_PCI_PASID
 	u16		pasid_features;
 #endif
+#ifdef CONFIG_PCI_P2PDMA
+	struct pci_p2pdma *p2pdma;
+#endif
 	phys_addr_t	rom;		/* Physical address if not from BAR */
 	size_t		romlen;		/* Length if not from BAR */
 	char		*driver_override; /* Driver name to force a match */
@@ -1342,7 +1348,6 @@ int pci_set_vga_state(struct pci_dev *pdev, bool decode,
 
 /* kmem_cache style wrapper around pci_alloc_consistent() */
 
-#include <linux/pci-dma.h>
 #include <linux/dmapool.h>
 
 #define	pci_pool dma_pool
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index a6d6650a0490..7acc9f91e72b 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -16,8 +16,6 @@
 
 /**
  * struct hotplug_slot_ops -the callbacks that the hotplug pci core can use
- * @owner: The module owner of this structure
- * @mod_name: The module name (KBUILD_MODNAME) of this structure
  * @enable_slot: Called when the user wants to enable a specific pci slot
  * @disable_slot: Called when the user wants to disable a specific pci slot
  * @set_attention_status: Called to set the specific slot's attention LED to
@@ -25,17 +23,9 @@
  * @hardware_test: Called to run a specified hardware test on the specified
  * slot.
  * @get_power_status: Called to get the current power status of a slot.
- *	If this field is NULL, the value passed in the struct hotplug_slot_info
- *	will be used when this value is requested by a user.
  * @get_attention_status: Called to get the current attention status of a slot.
- *	If this field is NULL, the value passed in the struct hotplug_slot_info
- *	will be used when this value is requested by a user.
  * @get_latch_status: Called to get the current latch status of a slot.
- *	If this field is NULL, the value passed in the struct hotplug_slot_info
- *	will be used when this value is requested by a user.
  * @get_adapter_status: Called to get see if an adapter is present in the slot or not.
- *	If this field is NULL, the value passed in the struct hotplug_slot_info
- *	will be used when this value is requested by a user.
  * @reset_slot: Optional interface to allow override of a bus reset for the
  *	slot for cases where a secondary bus reset can result in spurious
  *	hotplug events or where a slot can be reset independent of the bus.
@@ -46,8 +36,6 @@
  * set an LED, enable / disable power, etc.)
  */
 struct hotplug_slot_ops {
-	struct module *owner;
-	const char *mod_name;
 	int (*enable_slot)		(struct hotplug_slot *slot);
 	int (*disable_slot)		(struct hotplug_slot *slot);
 	int (*set_attention_status)	(struct hotplug_slot *slot, u8 value);
@@ -60,37 +48,19 @@ struct hotplug_slot_ops {
 };
 
 /**
- * struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot
- * @power_status: if power is enabled or not (1/0)
- * @attention_status: if the attention light is enabled or not (1/0)
- * @latch_status: if the latch (if any) is open or closed (1/0)
- * @adapter_status: if there is a pci board present in the slot or not (1/0)
- *
- * Used to notify the hotplug pci core of the status of a specific slot.
- */
-struct hotplug_slot_info {
-	u8	power_status;
-	u8	attention_status;
-	u8	latch_status;
-	u8	adapter_status;
-};
-
-/**
  * struct hotplug_slot - used to register a physical slot with the hotplug pci core
  * @ops: pointer to the &struct hotplug_slot_ops to be used for this slot
- * @info: pointer to the &struct hotplug_slot_info for the initial values for
- * this slot.
- * @private: used by the hotplug pci controller driver to store whatever it
- * needs.
+ * @owner: The module owner of this structure
+ * @mod_name: The module name (KBUILD_MODNAME) of this structure
  */
 struct hotplug_slot {
-	struct hotplug_slot_ops		*ops;
-	struct hotplug_slot_info	*info;
-	void				*private;
+	const struct hotplug_slot_ops	*ops;
 
 	/* Variables below this are for use only by the hotplug pci core. */
 	struct list_head		slot_list;
 	struct pci_slot			*pci_slot;
+	struct module			*owner;
+	const char			*mod_name;
 };
 
 static inline const char *hotplug_slot_name(const struct hotplug_slot *slot)
@@ -110,9 +80,6 @@ void pci_hp_del(struct hotplug_slot *slot);
 void pci_hp_destroy(struct hotplug_slot *slot);
 void pci_hp_deregister(struct hotplug_slot *slot);
 
-int __must_check pci_hp_change_slot_info(struct hotplug_slot *slot,
-					 struct hotplug_slot_info *info);
-
 /* use a define to avoid include chaining to get THIS_MODULE & friends */
 #define pci_hp_register(slot, pbus, devnr, name) \
 	__pci_hp_register(slot, pbus, devnr, name, THIS_MODULE, KBUILD_MODNAME)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 8ddc2ffe3895..69f0abe1ba1a 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2543,8 +2543,6 @@
 #define PCI_VENDOR_ID_HUAWEI         	0x19e5
 
 #define PCI_VENDOR_ID_NETRONOME		0x19ee
-#define PCI_DEVICE_ID_NETRONOME_NFP3200	0x3200
-#define PCI_DEVICE_ID_NETRONOME_NFP3240	0x3240
 #define PCI_DEVICE_ID_NETRONOME_NFP4000	0x4000
 #define PCI_DEVICE_ID_NETRONOME_NFP5000	0x5000
 #define PCI_DEVICE_ID_NETRONOME_NFP6000	0x6000
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index ee556ccc93f4..e1e9888c85e6 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -52,6 +52,7 @@
 #define  PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
 
 #define PCI_STATUS		0x06	/* 16 bits */
+#define  PCI_STATUS_IMM_READY	0x01	/* Immediate Readiness */
 #define  PCI_STATUS_INTERRUPT	0x08	/* Interrupt status */
 #define  PCI_STATUS_CAP_LIST	0x10	/* Support Capability List */
 #define  PCI_STATUS_66MHZ	0x20	/* Support 66 MHz PCI 2.1 bus */