diff options
author | Mario Limonciello <mario.limonciello@amd.com> | 2022-01-11 23:57:50 +0100 |
---|---|---|
committer | Alexandre Belloni <alexandre.belloni@bootlin.com> | 2022-03-29 22:45:31 +0200 |
commit | 3ae8fd41573af4fb3a490c9ed947fc936ba87190 (patch) | |
tree | 920fccf101af67671604f25d844def218ca3016e /include | |
parent | rtc: optee: add RTC driver for OP-TEE RTC PTA (diff) | |
download | linux-3ae8fd41573af4fb3a490c9ed947fc936ba87190.tar.xz linux-3ae8fd41573af4fb3a490c9ed947fc936ba87190.zip |
rtc: mc146818-lib: Fix the AltCentury for AMD platforms
Setting the century forward has been failing on AMD platforms.
There was a previous attempt at fixing this for family 0x17 as part of
commit 7ad295d5196a ("rtc: Fix the AltCentury value on AMD/Hygon
platform") but this was later reverted due to some problems reported
that appeared to stem from an FW bug on a family 0x17 desktop system.
The same comments mentioned in the previous commit continue to apply
to the newer platforms as well.
```
MC146818 driver use function mc146818_set_time() to set register
RTC_FREQ_SELECT(RTC_REG_A)'s bit4-bit6 field which means divider stage
reset value on Intel platform to 0x7.
While AMD/Hygon RTC_REG_A(0Ah)'s bit4 is defined as DV0 [Reference]:
DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1. Bit5-bit6 is defined
as reserved.
DV0 is set to 1, it will select Bank 1, which will disable AltCentury
register(0x32) access. As UEFI pass acpi_gbl_FADT.century 0x32
(AltCentury), the CMOS write will be failed on code:
CMOS_WRITE(century, acpi_gbl_FADT.century).
Correct RTC_REG_A bank select bit(DV0) to 0 on AMD/Hygon CPUs, it will
enable AltCentury(0x32) register writing and finally setup century as
expected.
```
However in closer examination the change previously submitted was also
modifying bits 5 & 6 which are declared reserved in the AMD documentation.
So instead modify just the DV0 bank selection bit.
Being cognizant that there was a failure reported before, split the code
change out to a static function that can also be used for exclusions if
any regressions such as Mikhail's pop up again.
Cc: Jinke Fan <fanjinke@hygon.cn>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/all/CABXGCsMLob0DC25JS8wwAYydnDoHBSoMh2_YLPfqm3TTvDE-Zw@mail.gmail.com/
Link: https://www.amd.com/system/files/TechDocs/51192_Bolton_FCH_RRG.pdf
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220111225750.1699-1-mario.limonciello@amd.com
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/mc146818rtc.h | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/include/linux/mc146818rtc.h b/include/linux/mc146818rtc.h index 808bb4cee230..b0da04fe087b 100644 --- a/include/linux/mc146818rtc.h +++ b/include/linux/mc146818rtc.h @@ -86,6 +86,8 @@ struct cmos_rtc_board_info { /* 2 values for divider stage reset, others for "testing purposes only" */ # define RTC_DIV_RESET1 0x60 # define RTC_DIV_RESET2 0x70 + /* In AMD BKDG bit 5 and 6 are reserved, bit 4 is for select dv0 bank */ +# define RTC_AMD_BANK_SELECT 0x10 /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */ # define RTC_RATE_SELECT 0x0F |