diff options
author | Brian Norris <computersforpeace@gmail.com> | 2017-05-01 22:36:44 +0200 |
---|---|---|
committer | Brian Norris <computersforpeace@gmail.com> | 2017-05-01 22:36:44 +0200 |
commit | 57e363b8c45b6626b012f6ce39a2f70adf6b49fc (patch) | |
tree | 720d15f5f181787aa815a17f1a4a7b82dc836019 /include | |
parent | mtd: physmap_of: use OF helpers for reading strings (diff) | |
parent | mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program (diff) | |
download | linux-57e363b8c45b6626b012f6ce39a2f70adf6b49fc.tar.xz linux-57e363b8c45b6626b012f6ce39a2f70adf6b49fc.zip |
Merge tag 'nand/for-4.12' of github.com:linux-nand/linux into MTD
From Boris:
"""
This pull request contains:
- some minor fixes/improvements on existing drivers (fsmc, gpio, ifc,
davinci, brcmnand, omap)
- a huge cleanup/rework of the denali driver accompanied with core
fixes/improvements to simplify the driver code
- a complete rewrite of the atmel driver to support new DT bindings
make future evolution easier
- the addition of per-vendor detection/initialization steps to avoid
extending the nand_ids table with more extended-id entries
"""
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/mtd/nand.h | 96 |
1 files changed, 68 insertions, 28 deletions
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 9591e0fbe5bd..8f67b1581683 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -366,26 +366,6 @@ struct onfi_ext_param_page { */ } __packed; -struct nand_onfi_vendor_micron { - u8 two_plane_read; - u8 read_cache; - u8 read_unique_id; - u8 dq_imped; - u8 dq_imped_num_settings; - u8 dq_imped_feat_addr; - u8 rb_pulldown_strength; - u8 rb_pulldown_strength_feat_addr; - u8 rb_pulldown_strength_num_settings; - u8 otp_mode; - u8 otp_page_start; - u8 otp_data_prot_addr; - u8 otp_num_pages; - u8 otp_feat_addr; - u8 read_retry_options; - u8 reserved[72]; - u8 param_revision; -} __packed; - struct jedec_ecc_info { u8 ecc_bits; u8 codeword_size; @@ -465,6 +445,17 @@ struct nand_jedec_params { } __packed; /** + * struct nand_id - NAND id structure + * @data: buffer containing the id bytes. Currently 8 bytes large, but can + * be extended if required. + * @len: ID length. + */ +struct nand_id { + u8 data[8]; + int len; +}; + +/** * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices * @lock: protection lock * @active: the mtd device which holds the controller currently @@ -525,7 +516,7 @@ static inline void nand_hw_control_init(struct nand_hw_control *nfc) * out-of-band data). * @read_page: function to read a page according to the ECC generator * requirements; returns maximum number of bitflips corrected in - * any single ECC step, 0 if bitflips uncorrectable, -EIO hw error + * any single ECC step, -EIO hw error * @read_subpage: function to read parts of the page covered by ECC; * returns same as read_page() * @write_subpage: function to write parts of the page covered by ECC. @@ -721,6 +712,20 @@ nand_get_sdr_timings(const struct nand_data_interface *conf) } /** + * struct nand_manufacturer_ops - NAND Manufacturer operations + * @detect: detect the NAND memory organization and capabilities + * @init: initialize all vendor specific fields (like the ->read_retry() + * implementation) if any. + * @cleanup: the ->init() function may have allocated resources, ->cleanup() + * is here to let vendor specific code release those resources. + */ +struct nand_manufacturer_ops { + void (*detect)(struct nand_chip *chip); + int (*init)(struct nand_chip *chip); + void (*cleanup)(struct nand_chip *chip); +}; + +/** * struct nand_chip - NAND Private Flash Chip Data * @mtd: MTD device registered to the MTD framework * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the @@ -750,6 +755,7 @@ nand_get_sdr_timings(const struct nand_data_interface *conf) * setting the read-retry mode. Mostly needed for MLC NAND. * @ecc: [BOARDSPECIFIC] ECC control structure * @buffers: buffer structure for read/write + * @buf_align: minimum buffer alignment required by a platform * @hwcontrol: platform-specific hardware control structure * @erase: [REPLACEABLE] erase function * @scan_bbt: [REPLACEABLE] function to scan bad block table @@ -793,6 +799,7 @@ nand_get_sdr_timings(const struct nand_data_interface *conf) * @pagebuf_bitflips: [INTERN] holds the bitflip count for the page which is * currently in data_buf. * @subpagesize: [INTERN] holds the subpagesize + * @id: [INTERN] holds NAND ID * @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded), * non 0 if ONFI supported. * @jedec_version: [INTERN] holds the chip JEDEC version (BCD encoded), @@ -822,7 +829,7 @@ nand_get_sdr_timings(const struct nand_data_interface *conf) * @errstat: [OPTIONAL] hardware specific function to perform * additional error status checks (determine if errors are * correctable). - * @write_page: [REPLACEABLE] High-level page write function + * @manufacturer: [INTERN] Contains manufacturer information */ struct nand_chip { @@ -847,9 +854,6 @@ struct nand_chip { int (*scan_bbt)(struct mtd_info *mtd); int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page); - int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, - uint32_t offset, int data_len, const uint8_t *buf, - int oob_required, int page, int cached, int raw); int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip, int feature_addr, uint8_t *subfeature_para); int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip, @@ -881,6 +885,7 @@ struct nand_chip { int badblockpos; int badblockbits; + struct nand_id id; int onfi_version; int jedec_version; union { @@ -901,6 +906,7 @@ struct nand_chip { struct nand_ecc_ctrl ecc; struct nand_buffers *buffers; + unsigned long buf_align; struct nand_hw_control hwcontrol; uint8_t *bbt; @@ -910,6 +916,11 @@ struct nand_chip { struct nand_bbt_descr *badblock_pattern; void *priv; + + struct { + const struct nand_manufacturer *desc; + void *priv; + } manufacturer; }; extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops; @@ -946,6 +957,17 @@ static inline void nand_set_controller_data(struct nand_chip *chip, void *priv) chip->priv = priv; } +static inline void nand_set_manufacturer_data(struct nand_chip *chip, + void *priv) +{ + chip->manufacturer.priv = priv; +} + +static inline void *nand_get_manufacturer_data(struct nand_chip *chip) +{ + return chip->manufacturer.priv; +} + /* * NAND Flash Manufacturer ID Codes */ @@ -1049,17 +1071,33 @@ struct nand_flash_dev { }; /** - * struct nand_manufacturers - NAND Flash Manufacturer ID Structure + * struct nand_manufacturer - NAND Flash Manufacturer structure * @name: Manufacturer name * @id: manufacturer ID code of device. + * @ops: manufacturer operations */ -struct nand_manufacturers { +struct nand_manufacturer { int id; char *name; + const struct nand_manufacturer_ops *ops; }; +const struct nand_manufacturer *nand_get_manufacturer(u8 id); + +static inline const char * +nand_manufacturer_name(const struct nand_manufacturer *manufacturer) +{ + return manufacturer ? manufacturer->name : "Unknown"; +} + extern struct nand_flash_dev nand_flash_ids[]; -extern struct nand_manufacturers nand_manuf_ids[]; + +extern const struct nand_manufacturer_ops toshiba_nand_manuf_ops; +extern const struct nand_manufacturer_ops samsung_nand_manuf_ops; +extern const struct nand_manufacturer_ops hynix_nand_manuf_ops; +extern const struct nand_manufacturer_ops micron_nand_manuf_ops; +extern const struct nand_manufacturer_ops amd_nand_manuf_ops; +extern const struct nand_manufacturer_ops macronix_nand_manuf_ops; int nand_default_bbt(struct mtd_info *mtd); int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs); @@ -1226,4 +1264,6 @@ int nand_reset(struct nand_chip *chip, int chipnr); /* Free resources held by the NAND device */ void nand_cleanup(struct nand_chip *chip); +/* Default extended ID decoding function */ +void nand_decode_ext_id(struct nand_chip *chip); #endif /* __LINUX_MTD_NAND_H */ |