Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (41 commits)
  regulator: Add some brief design documentation
  regulator: fix voltage range in da9034 ldo12
  regulator/driver: be more specific in nanodoc for is_enabled
  regulator/lp3971: drop unnecessary initialization
  regulator: drop 'default n'
  regulator: fix typos
  regulator: fix calculation of voltage range in da9034_set_ldo12_voltage()
  regulator: update a filename in documentation
  drivers/regulator/Kconfig: fix typo (s/Usersapce/Userspace/) in REGULATOR_USERSPACE_CONSUMER description
  REGULATOR Handle positive returncode from enable
  regulator: tps650xx - build fixes for x86_64
  Fix some regulator documentation
  Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile
  Regulator: Add TPS6507x regulator driver
  Regulator: Add TPS65023 regulator driver
  regulator: userspace: use sysfs_create_group
  regulator: Add GPIO enable control to fixed voltage regulator driver
  Regulator: Implement list_voltage for pcf50633 regulator driver.
  regulator: regulator_enable() permission checking
  regulator: Push locking for regulator_is_enabled() out
  ...

6 files changed, 59 insertions, 8 deletions

diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h
index 115dbe965082..c63b65c94429 100644
--- a/include/linux/mfd/da903x.h
+++ b/include/linux/mfd/da903x.h
@@ -1,7 +1,7 @@
 #ifndef __LINUX_PMIC_DA903X_H
 #define __LINUX_PMIC_DA903X_H
 
-/* Unified sub device IDs for DA9030/DA9034 */
+/* Unified sub device IDs for DA9030/DA9034/DA9035 */
 enum {
 	DA9030_ID_LED_1,
 	DA9030_ID_LED_2,
@@ -57,6 +57,8 @@ enum {
 	DA9034_ID_LDO13,
 	DA9034_ID_LDO14,
 	DA9034_ID_LDO15,
+
+	DA9035_ID_BUCK3,
 };
 
 /*
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 277f4b964df5..490c5b37b6d7 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -125,6 +125,8 @@ struct regulator_bulk_data {
 /* regulator get and put */
 struct regulator *__must_check regulator_get(struct device *dev,
 					     const char *id);
+struct regulator *__must_check regulator_get_exclusive(struct device *dev,
+						       const char *id);
 void regulator_put(struct regulator *regulator);
 
 /* regulator output control and status */
@@ -144,6 +146,8 @@ void regulator_bulk_free(int num_consumers,
 
 int regulator_count_voltages(struct regulator *regulator);
 int regulator_list_voltage(struct regulator *regulator, unsigned selector);
+int regulator_is_supported_voltage(struct regulator *regulator,
+				   int min_uV, int max_uV);
 int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
 int regulator_get_voltage(struct regulator *regulator);
 int regulator_set_current_limit(struct regulator *regulator,
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index ce1be708ca16..31f2055eae28 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -37,7 +37,8 @@ enum regulator_status {
  *
  * @enable: Configure the regulator as enabled.
  * @disable: Configure the regulator as disabled.
- * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise.
+ * @is_enabled: Return 1 if the regulator is enabled, 0 if not.
+ *		May also return negative errno.
  *
  * @set_voltage: Set the voltage for the regulator within the range specified.
  *               The driver should select the voltage closest to min_uV.
@@ -162,6 +163,8 @@ struct regulator_desc {
 struct regulator_dev {
 	struct regulator_desc *desc;
 	int use_count;
+	int open_count;
+	int exclusive;
 
 	/* lists we belong to */
 	struct list_head list; /* list of all regulators */
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index 91b4da31f1b5..e94a4a1c7c8a 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -5,6 +5,9 @@
  *
  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
  *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of the
@@ -16,9 +19,30 @@
 
 struct regulator_init_data;
 
+/**
+ * struct fixed_voltage_config - fixed_voltage_config structure
+ * @supply_name:	Name of the regulator supply
+ * @microvolts:		Output voltage of regulator
+ * @gpio:		GPIO to use for enable control
+ * 			set to -EINVAL if not used
+ * @enable_high:	Polarity of enable GPIO
+ *			1 = Active high, 0 = Active low
+ * @enabled_at_boot:	Whether regulator has been enabled at
+ * 			boot or not. 1 = Yes, 0 = No
+ * 			This is used to keep the regulator at
+ * 			the default state
+ * @init_data:		regulator_init_data
+ *
+ * This structure contains fixed voltage regulator configuration
+ * information that must be passed by platform code to the fixed
+ * voltage regulator driver.
+ */
 struct fixed_voltage_config {
 	const char *supply_name;
 	int microvolts;
+	int gpio;
+	unsigned enable_high:1;
+	unsigned enabled_at_boot:1;
 	struct regulator_init_data *init_data;
 };
 
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index bac64fa390f2..87f5f176d4ef 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -41,7 +41,7 @@ struct regulator;
 #define REGULATOR_CHANGE_DRMS		0x10
 
 /**
- * struct regulator_state - regulator state during low power syatem states
+ * struct regulator_state - regulator state during low power system states
  *
  * This describes a regulators state during a system wide low power state.
  *
@@ -117,25 +117,37 @@ struct regulation_constraints {
 	/* mode to set on startup */
 	unsigned int initial_mode;
 
-	/* constriant flags */
+	/* constraint flags */
 	unsigned always_on:1;	/* regulator never off when system is on */
 	unsigned boot_on:1;	/* bootloader/firmware enabled regulator */
-	unsigned apply_uV:1;	/* apply uV constraint iff min == max */
+	unsigned apply_uV:1;	/* apply uV constraint if min == max */
 };
 
 /**
  * struct regulator_consumer_supply - supply -> device mapping
  *
- * This maps a supply name to a device.
+ * This maps a supply name to a device.  Only one of dev or dev_name
+ * can be specified.  Use of dev_name allows support for buses which
+ * make struct device available late such as I2C and is the preferred
+ * form.
  *
  * @dev: Device structure for the consumer.
+ * @dev_name: Result of dev_name() for the consumer.
  * @supply: Name for the supply.
  */
 struct regulator_consumer_supply {
 	struct device *dev;	/* consumer */
+	const char *dev_name;   /* dev_name() for consumer */
 	const char *supply;	/* consumer supply - e.g. "vcc" */
 };
 
+/* Initialize struct regulator_consumer_supply */
+#define REGULATOR_SUPPLY(_name, _dev_name)			\
+{								\
+	.supply		= _name,				\
+	.dev_name	= _dev_name,				\
+}
+
 /**
  * struct regulator_init_data - regulator platform initialisation data.
  *
@@ -166,6 +178,12 @@ struct regulator_init_data {
 
 int regulator_suspend_prepare(suspend_state_t state);
 
+#ifdef CONFIG_REGULATOR
 void regulator_has_full_constraints(void);
+#else
+static inline void regulator_has_full_constraints(void)
+{
+}
+#endif
 
 #endif
diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h
index 44563192bf16..de9a7fae20be 100644
--- a/include/linux/regulator/max1586.h
+++ b/include/linux/regulator/max1586.h
@@ -36,7 +36,7 @@
  * max1586_subdev_data - regulator data
  * @id: regulator Id (either MAX1586_V3 or MAX1586_V6)
  * @name: regulator cute name (example for V3: "vcc_core")
- * @platform_data: regulator init data (contraints, supplies, ...)
+ * @platform_data: regulator init data (constraints, supplies, ...)
  */
 struct max1586_subdev_data {
 	int				id;
@@ -46,7 +46,7 @@ struct max1586_subdev_data {
 
 /**
  * max1586_platform_data - platform data for max1586
- * @num_subdevs: number of regultors used (may be 1 or 2)
+ * @num_subdevs: number of regulators used (may be 1 or 2)
  * @subdevs: regulator used
  *           At most, there will be a regulator for V3 and one for V6 voltages.
  * @v3_gain: gain on the V3 voltage output multiplied by 1e6.