drm/kms-core: Use recommened kerneldoc for struct member refs

I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).

Also some minor drive-by polish where it makes sense, I read a lot
of docs ...

v2: Review from Eric.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-4-daniel.vetter@ffwll.ch

10 files changed, 80 insertions, 73 deletions

diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
index f96220ed4004..2e28fdca9c3d 100644
--- a/include/drm/drm_atomic.h
+++ b/include/drm/drm_atomic.h
@@ -123,7 +123,8 @@ struct drm_crtc_commit {
 	/**
 	 * @commit_entry:
 	 *
-	 * Entry on the per-CRTC commit_list. Protected by crtc->commit_lock.
+	 * Entry on the per-CRTC &drm_crtc.commit_list. Protected by
+	 * $drm_crtc.commit_lock.
 	 */
 	struct list_head commit_entry;
 
@@ -429,7 +430,8 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
  *
  * For example if the CRTC mode has changed, and the hardware is able to enact
  * the requested mode change without going through a full modeset, the driver
- * should clear mode_changed during its ->atomic_check.
+ * should clear mode_changed in its &drm_mode_config_funcs.atomic_check
+ * implementation.
  */
 static inline bool
 drm_atomic_crtc_needs_modeset(const struct drm_crtc_state *state)
diff --git a/include/drm/drm_color_mgmt.h b/include/drm/drm_color_mgmt.h
index c767238ac9d5..d9c2f680f5ae 100644
--- a/include/drm/drm_color_mgmt.h
+++ b/include/drm/drm_color_mgmt.h
@@ -34,7 +34,7 @@ int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
 				 int gamma_size);
 
 /**
- * drm_color_lut_extract - clamp&round LUT entries
+ * drm_color_lut_extract - clamp and round LUT entries
  * @user_input: input value
  * @bit_precision: number of bits the hw LUT supports
  *
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index d489cc003b7e..e5e1eddd19fb 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -331,15 +331,15 @@ struct drm_connector_funcs {
 	 *
 	 * Entry point for output detection and basic mode validation. The
 	 * driver should reprobe the output if needed (e.g. when hotplug
-	 * handling is unreliable), add all detected modes to connector->modes
+	 * handling is unreliable), add all detected modes to &drm_connector.modes
 	 * and filter out any the device can't support in any configuration. It
 	 * also needs to filter out any modes wider or higher than the
 	 * parameters max_width and max_height indicate.
 	 *
 	 * The drivers must also prune any modes no longer valid from
-	 * connector->modes. Furthermore it must update connector->status and
-	 * connector->edid.  If no EDID has been received for this output
-	 * connector->edid must be NULL.
+	 * &drm_connector.modes. Furthermore it must update
+	 * &drm_connector.status and &drm_connector.edid.  If no EDID has been
+	 * received for this output connector->edid must be NULL.
 	 *
 	 * Drivers using the probe helpers should use
 	 * drm_helper_probe_single_connector_modes() or
@@ -348,7 +348,7 @@ struct drm_connector_funcs {
 	 *
 	 * RETURNS:
 	 *
-	 * The number of modes detected and filled into connector->modes.
+	 * The number of modes detected and filled into &drm_connector.modes.
 	 */
 	int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
 
@@ -381,7 +381,7 @@ struct drm_connector_funcs {
 	 * core drm connector interfaces. Everything added from this callback
 	 * should be unregistered in the early_unregister callback.
 	 *
-	 * This is called while holding drm_connector->mutex.
+	 * This is called while holding &drm_connector.mutex.
 	 *
 	 * Returns:
 	 *
@@ -398,7 +398,7 @@ struct drm_connector_funcs {
 	 * early in the driver unload sequence to disable userspace access
 	 * before data structures are torndown.
 	 *
-	 * This is called while holding drm_connector->mutex.
+	 * This is called while holding &drm_connector.mutex.
 	 */
 	void (*early_unregister)(struct drm_connector *connector);
 
@@ -418,9 +418,9 @@ struct drm_connector_funcs {
 	 * Duplicate the current atomic state for this connector and return it.
 	 * The core and helpers guarantee that any atomic state duplicated with
 	 * this hook and still owned by the caller (i.e. not transferred to the
-	 * driver by calling ->atomic_commit() from struct
-	 * &drm_mode_config_funcs) will be cleaned up by calling the
-	 * @atomic_destroy_state hook in this structure.
+	 * driver by calling &drm_mode_config_funcs.atomic_commit) will be
+	 * cleaned up by calling the @atomic_destroy_state hook in this
+	 * structure.
 	 *
 	 * Atomic drivers which don't subclass &struct drm_connector_state should use
 	 * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
@@ -428,7 +428,7 @@ struct drm_connector_funcs {
 	 * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
 	 * duplicated in a consistent fashion across drivers.
 	 *
-	 * It is an error to call this hook before connector->state has been
+	 * It is an error to call this hook before &drm_connector.state has been
 	 * initialized correctly.
 	 *
 	 * NOTE:
@@ -609,8 +609,8 @@ struct drm_connector {
 
 	/**
 	 * @mutex: Lock for general connector state, but currently only protects
-	 * @registered. Most of the connector state is still protected by the
-	 * mutex in &drm_mode_config.
+	 * @registered. Most of the connector state is still protected by
+	 * &drm_mode_config.mutex.
 	 */
 	struct mutex mutex;
 
@@ -636,22 +636,22 @@ struct drm_connector {
 	/**
 	 * @modes:
 	 * Modes available on this connector (from fill_modes() + user).
-	 * Protected by dev->mode_config.mutex.
+	 * Protected by &drm_mode_config.mutex.
 	 */
-	struct list_head modes; /* list of modes on this connector */
+	struct list_head modes;
 
 	/**
 	 * @status:
 	 * One of the drm_connector_status enums (connected, not, or unknown).
-	 * Protected by dev->mode_config.mutex.
+	 * Protected by &drm_mode_config.mutex.
 	 */
 	enum drm_connector_status status;
 
 	/**
 	 * @probed_modes:
 	 * These are modes added by probing with DDC or the BIOS, before
-	 * filtering is applied. Used by the probe helpers.Protected by
-	 * dev->mode_config.mutex.
+	 * filtering is applied. Used by the probe helpers. Protected by
+	 * &drm_mode_config.mutex.
 	 */
 	struct list_head probed_modes;
 
@@ -659,10 +659,10 @@ struct drm_connector {
 	 * @display_info: Display information is filled from EDID information
 	 * when a display is detected. For non hot-pluggable displays such as
 	 * flat panels in embedded systems, the driver should initialize the
-	 * display_info.width_mm and display_info.height_mm fields with the
-	 * physical size of the display.
+	 * &drm_display_info.width_mm and &drm_display_info.height_mm fields
+	 * with the physical size of the display.
 	 *
-	 * Protected by dev->mode_config.mutex.
+	 * Protected by &drm_mode_config.mutex.
 	 */
 	struct drm_display_info display_info;
 	const struct drm_connector_funcs *funcs;
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 06c943d1e04c..10661e156d89 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -81,8 +81,8 @@ struct drm_plane_helper_funcs;
  * @enable: whether the CRTC should be enabled, gates all other state
  * @active: whether the CRTC is actively displaying (used for DPMS)
  * @planes_changed: planes on this crtc are updated
- * @mode_changed: crtc_state->mode or crtc_state->enable has been changed
- * @active_changed: crtc_state->active has been toggled.
+ * @mode_changed: @mode or @enable has been changed
+ * @active_changed: @active has been toggled.
  * @connectors_changed: connectors to this crtc have been updated
  * @zpos_changed: zpos values of planes on this crtc have been updated
  * @color_mgmt_changed: color management properties have changed (degamma or
@@ -102,9 +102,10 @@ struct drm_plane_helper_funcs;
  *
  * Note that the distinction between @enable and @active is rather subtile:
  * Flipping @active while @enable is set without changing anything else may
- * never return in a failure from the ->atomic_check callback. Userspace assumes
- * that a DPMS On will always succeed. In other words: @enable controls resource
- * assignment, @active controls the actual hardware state.
+ * never return in a failure from the &drm_mode_config_funcs.atomic_check
+ * callback. Userspace assumes that a DPMS On will always succeed. In other
+ * words: @enable controls resource assignment, @active controls the actual
+ * hardware state.
  *
  * The three booleans active_changed, connectors_changed and mode_changed are
  * intended to indicate whether a full modeset is needed, rather than strictly
@@ -346,8 +347,8 @@ struct drm_crtc_funcs {
 	 * through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application
 	 * requests a page flip the DRM core verifies that the new frame buffer
 	 * is large enough to be scanned out by the CRTC in the currently
-	 * configured mode and then calls the CRTC ->page_flip() operation with a
-	 * pointer to the new frame buffer.
+	 * configured mode and then calls this hook with a pointer to the new
+	 * frame buffer.
 	 *
 	 * The driver must wait for any pending rendering to the new framebuffer
 	 * to complete before executing the flip. It should also wait for any
@@ -382,7 +383,7 @@ struct drm_crtc_funcs {
 	 * RETURNS:
 	 *
 	 * 0 on success or a negative error code on failure. Note that if a
-	 * ->page_flip() operation is already pending the callback should return
+	 * page flip operation is already pending the callback should return
 	 * -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode
 	 * or just runtime disabled through DPMS respectively the new atomic
 	 * "ACTIVE" state) should result in an -EINVAL error code. Note that
@@ -434,19 +435,19 @@ struct drm_crtc_funcs {
 	 * @atomic_duplicate_state:
 	 *
 	 * Duplicate the current atomic state for this CRTC and return it.
-	 * The core and helpers gurantee that any atomic state duplicated with
+	 * The core and helpers guarantee that any atomic state duplicated with
 	 * this hook and still owned by the caller (i.e. not transferred to the
-	 * driver by calling ->atomic_commit() from struct
-	 * &drm_mode_config_funcs) will be cleaned up by calling the
-	 * @atomic_destroy_state hook in this structure.
+	 * driver by calling &drm_mode_config_funcs.atomic_commit) will be
+	 * cleaned up by calling the @atomic_destroy_state hook in this
+	 * structure.
 	 *
-	 * Atomic drivers which don't subclass &struct drm_crtc should use
+	 * Atomic drivers which don't subclass &struct drm_crtc_state should use
 	 * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the
 	 * state structure to extend it with driver-private state should use
 	 * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is
 	 * duplicated in a consistent fashion across drivers.
 	 *
-	 * It is an error to call this hook before crtc->state has been
+	 * It is an error to call this hook before &drm_crtc.state has been
 	 * initialized correctly.
 	 *
 	 * NOTE:
@@ -641,7 +642,7 @@ struct drm_crtc {
 	 * This provides a read lock for the overall crtc state (mode, dpms
 	 * state, ...) and a write lock for everything which can be update
 	 * without a full modeset (fb, cursor data, crtc properties ...). Full
-	 * modeset also need to grab dev->mode_config.connection_mutex.
+	 * modeset also need to grab &drm_mode_config.connection_mutex.
 	 */
 	struct drm_modeset_lock mutex;
 
diff --git a/include/drm/drm_framebuffer.h b/include/drm/drm_framebuffer.h
index 046c35e54099..04c77eee9c20 100644
--- a/include/drm/drm_framebuffer.h
+++ b/include/drm/drm_framebuffer.h
@@ -40,8 +40,8 @@ struct drm_framebuffer_funcs {
 	 *
 	 * Clean up framebuffer resources, specifically also unreference the
 	 * backing storage. The core guarantees to call this function for every
-	 * framebuffer successfully created by ->fb_create() in
-	 * &drm_mode_config_funcs. Drivers must also call
+	 * framebuffer successfully created by calling
+	 * &drm_mode_config_funcs.fb_create. Drivers must also call
 	 * drm_framebuffer_cleanup() to release DRM core resources for this
 	 * framebuffer.
 	 */
@@ -112,8 +112,8 @@ struct drm_framebuffer {
 	 */
 	struct drm_device *dev;
 	/**
-	 * @head: Place on the dev->mode_config.fb_list, access protected by
-	 * dev->mode_config.fb_lock.
+	 * @head: Place on the &drm_mode_config.fb_list, access protected by
+	 * &drm_mode_config.fb_lock.
 	 */
 	struct list_head head;
 
@@ -187,8 +187,7 @@ struct drm_framebuffer {
 	 */
 	int hot_y;
 	/**
-	 * @filp_head: Placed on &struct drm_file fbs list_head, protected by
-	 * fbs_lock in the same structure.
+	 * @filp_head: Placed on &drm_file.fbs, protected by &drm_file.fbs_lock.
 	 */
 	struct list_head filp_head;
 };
@@ -260,8 +259,8 @@ static inline void drm_framebuffer_assign(struct drm_framebuffer **p,
  * @fb: the loop cursor
  * @dev: the DRM device
  *
- * Iterate over all framebuffers of @dev. User must hold the fb_lock from
- * &drm_mode_config.
+ * Iterate over all framebuffers of @dev. User must hold
+ * &drm_mode_config.fb_lock.
  */
 #define drm_for_each_fb(fb, dev) \
 	for (WARN_ON(!mutex_is_locked(&(dev)->mode_config.fb_lock)),		\
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 17942c0f32a8..5a29978062d3 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -132,8 +132,8 @@ struct drm_mode_config_funcs {
 	 *    that before calling this hook.
 	 *
 	 * See the documentation of @atomic_commit for an exhaustive list of
-	 * error conditions which don't have to be checked at the
-	 * ->atomic_check() stage?
+	 * error conditions which don't have to be checked at the in this
+	 * callback.
 	 *
 	 * See the documentation for &struct drm_atomic_state for how exactly
 	 * an atomic modeset update is described.
@@ -198,10 +198,10 @@ struct drm_mode_config_funcs {
 	 * completed. These events are per-CRTC and can be distinguished by the
 	 * CRTC index supplied in &drm_event to userspace.
 	 *
-	 * The drm core will supply a &struct drm_event in the event
-	 * member of each CRTC's &drm_crtc_state structure. See the
-	 * documentation for &drm_crtc_state for more details about the precise
-	 * semantics of this event.
+	 * The drm core will supply a &struct drm_event in each CRTC's
+	 * &drm_crtc_state.event. See the documentation for
+	 * &drm_crtc_state.event for more details about the precise semantics of
+	 * this event.
 	 *
 	 * NOTE:
 	 *
diff --git a/include/drm/drm_mode_object.h b/include/drm/drm_mode_object.h
index 43460b21d112..2c017adf6d74 100644
--- a/include/drm/drm_mode_object.h
+++ b/include/drm/drm_mode_object.h
@@ -86,10 +86,15 @@ struct drm_object_properties {
 	 *
 	 * Note that atomic drivers do not store mutable properties in this
 	 * array, but only the decoded values in the corresponding state
-	 * structure. The decoding is done using the ->atomic_get_property and
-	 * ->atomic_set_property hooks of the corresponding object. Hence atomic
-	 * drivers should not use drm_object_property_set_value() and
-	 * drm_object_property_get_value() on mutable objects, i.e. those
+	 * structure. The decoding is done using the &drm_crtc.atomic_get_property and
+	 * &drm_crtc.atomic_set_property hooks for &struct drm_crtc. For
+	 * &struct drm_plane the hooks are &drm_plane_funcs.atomic_get_property and
+	 * &drm_plane_funcs.atomic_set_property. And for &struct drm_connector
+	 * the hooks are &drm_connector_funcs.atomic_get_property and
+	 * &drm_connector_funcs.atomic_set_property .
+	 *
+	 * Hence atomic drivers should not use drm_object_property_set_value()
+	 * and drm_object_property_get_value() on mutable objects, i.e. those
 	 * without the DRM_MODE_PROP_IMMUTABLE flag set.
 	 */
 	uint64_t values[DRM_OBJECT_MAX_PROPERTY];
diff --git a/include/drm/drm_modeset_lock.h b/include/drm/drm_modeset_lock.h
index d918ce45ec2c..96d39fbd12ca 100644
--- a/include/drm/drm_modeset_lock.h
+++ b/include/drm/drm_modeset_lock.h
@@ -64,7 +64,7 @@ struct drm_modeset_acquire_ctx {
 /**
  * struct drm_modeset_lock - used for locking modeset resources.
  * @mutex: resource locking
- * @head: used to hold it's place on state->locked list when
+ * @head: used to hold it's place on &drm_atomi_state.locked list when
  *    part of an atomic update
  *
  * Used for locking CRTCs and other modeset resources.
diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
index e049bc52fb07..6834d61eec30 100644
--- a/include/drm/drm_plane.h
+++ b/include/drm/drm_plane.h
@@ -247,11 +247,11 @@ struct drm_plane_funcs {
 	 * @atomic_duplicate_state:
 	 *
 	 * Duplicate the current atomic state for this plane and return it.
-	 * The core and helpers gurantee that any atomic state duplicated with
+	 * The core and helpers guarantee that any atomic state duplicated with
 	 * this hook and still owned by the caller (i.e. not transferred to the
-	 * driver by calling ->atomic_commit() from struct
-	 * &drm_mode_config_funcs) will be cleaned up by calling the
-	 * @atomic_destroy_state hook in this structure.
+	 * driver by calling &drm_mode_config_funcs.atomic_commit) will be
+	 * cleaned up by calling the @atomic_destroy_state hook in this
+	 * structure.
 	 *
 	 * Atomic drivers which don't subclass &struct drm_plane_state should use
 	 * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the
@@ -259,7 +259,7 @@ struct drm_plane_funcs {
 	 * __drm_atomic_helper_plane_duplicate_state() to make sure shared state is
 	 * duplicated in a consistent fashion across drivers.
 	 *
-	 * It is an error to call this hook before plane->state has been
+	 * It is an error to call this hook before &drm_plane.state has been
 	 * initialized correctly.
 	 *
 	 * NOTE:
@@ -423,8 +423,8 @@ enum drm_plane_type {
 	 *
 	 * Primary planes represent a "main" plane for a CRTC.  Primary planes
 	 * are the planes operated upon by CRTC modesetting and flipping
-	 * operations described in the page_flip and set_config hooks in struct
-	 * &drm_crtc_funcs.
+	 * operations described in the &drm_crtc_funcs.page_flip and
+	 * &drm_crtc_funcs.set_config hooks.
 	 */
 	DRM_PLANE_TYPE_PRIMARY,
 
@@ -470,9 +470,9 @@ struct drm_plane {
 	/**
 	 * @mutex:
 	 *
-	 * Protects modeset plane state, together with the mutex of &drm_crtc
-	 * this plane is linked to (when active, getting actived or getting
-	 * disabled).
+	 * Protects modeset plane state, together with the &drm_crtc.mutex of
+	 * CRTC this plane is linked to (when active, getting activated or
+	 * getting disabled).
 	 */
 	struct drm_modeset_lock mutex;
 
@@ -580,7 +580,7 @@ static inline struct drm_plane *drm_plane_find(struct drm_device *dev,
  *
  * Iterate over all legacy planes of @dev, excluding primary and cursor planes.
  * This is useful for implementing userspace apis when userspace is not
- * universal plane aware. See also enum &drm_plane_type.
+ * universal plane aware. See also &enum drm_plane_type.
  */
 #define drm_for_each_legacy_plane(plane, dev) \
 	list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \
diff --git a/include/drm/drm_property.h b/include/drm/drm_property.h
index 43c4b6a2046d..f66fdb47551c 100644
--- a/include/drm/drm_property.h
+++ b/include/drm/drm_property.h
@@ -30,7 +30,7 @@
 /**
  * struct drm_property_enum - symbolic values for enumerations
  * @value: numeric property value for this enum entry
- * @head: list of enum values, linked to enum_list in &drm_property
+ * @head: list of enum values, linked to &drm_property.enum_list
  * @name: symbolic name for the enum
  *
  * For enumeration and bitmask properties this structure stores the symbolic
@@ -191,9 +191,9 @@ struct drm_property {
  * struct drm_property_blob - Blob data for &drm_property
  * @base: base KMS object
  * @dev: DRM device
- * @head_global: entry on the global blob list in &drm_mode_config
- *	property_blob_list.
- * @head_file: entry on the per-file blob list in &drm_file blobs list.
+ * @head_global: entry on the global blob list in
+ * 	&drm_mode_config.property_blob_list.
+ * @head_file: entry on the per-file blob list in &drm_file.blobs list.
  * @length: size of the blob in bytes, invariant over the lifetime of the object
  * @data: actual data, embedded at the end of this structure
  *