Merge tag 'mac80211-next-for-net-next-2020-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
A new set of changes:
 * lots of small documentation fixes, from Jérôme Pouiller
 * beacon protection (BIGTK) support from Jouni Malinen
 * some initial code for TID configuration, from Tamizh chelvam
 * I reverted some new API before it's actually used, because
   it's wrong to mix controlled port and preauth
 * a few other cleanups/fixes
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 193 insertions, 53 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 7709b92f5b6b..f7c84c32ba39 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -72,12 +72,12 @@ struct wiphy;
  *
  * @IEEE80211_CHAN_DISABLED: This channel is disabled.
  * @IEEE80211_CHAN_NO_IR: do not initiate radiation, this includes
- * 	sending probe requests or beaconing.
+ *	sending probe requests or beaconing.
  * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
  * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
- * 	is not permitted.
+ *	is not permitted.
  * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
- * 	is not permitted.
+ *	is not permitted.
  * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel.
  * @IEEE80211_CHAN_NO_80MHZ: If the driver supports 80 MHz on the band,
  *	this flag indicates that an 80 MHz channel cannot use this
@@ -627,6 +627,41 @@ struct cfg80211_chan_def {
 };
 
 /**
+ * struct cfg80211_tid_cfg - TID specific configuration
+ * @config_override: Flag to notify driver to reset TID configuration
+ *	of the peer.
+ * @tids: bitmap of TIDs to modify
+ * @mask: bitmap of attributes indicating which parameter changed,
+ *	similar to &nl80211_tid_config_supp.
+ * @noack: noack configuration value for the TID
+ * @retry_long: retry count value
+ * @retry_short: retry count value
+ * @ampdu: Enable/Disable aggregation
+ * @rtscts: Enable/Disable RTS/CTS
+ */
+struct cfg80211_tid_cfg {
+	bool config_override;
+	u8 tids;
+	u32 mask;
+	enum nl80211_tid_config noack;
+	u8 retry_long, retry_short;
+	enum nl80211_tid_config ampdu;
+	enum nl80211_tid_config rtscts;
+};
+
+/**
+ * struct cfg80211_tid_config - TID configuration
+ * @peer: Station's MAC address
+ * @n_tid_conf: Number of TID specific configurations to be applied
+ * @tid_conf: Configuration change info
+ */
+struct cfg80211_tid_config {
+	const u8 *peer;
+	u32 n_tid_conf;
+	struct cfg80211_tid_cfg tid_conf[];
+};
+
+/**
  * cfg80211_get_chandef_type - return old channel type from chandef
  * @chandef: the channel definition
  *
@@ -1686,7 +1721,7 @@ struct mpath_info {
  * @basic_rates_len: number of basic rates
  * @ap_isolate: do not forward packets between connected stations
  * @ht_opmode: HT Operation mode
- * 	(u16 = opmode, -1 = do not change)
+ *	(u16 = opmode, -1 = do not change)
  * @p2p_ctwindow: P2P CT Window (-1 = no change)
  * @p2p_opp_ps: P2P opportunistic PS (-1 = no change)
  */
@@ -2062,8 +2097,8 @@ struct cfg80211_bss_select_adjust {
  * @ie_len: length of ie in octets
  * @flags: bit field of flags controlling operation
  * @match_sets: sets of parameters to be matched for a scan result
- * 	entry to be considered valid and to be passed to the host
- * 	(others are filtered out).
+ *	entry to be considered valid and to be passed to the host
+ *	(others are filtered out).
  *	If ommited, all results are passed.
  * @n_match_sets: number of match sets
  * @report_results: indicates that results were reported for this request
@@ -2456,7 +2491,7 @@ struct cfg80211_disassoc_request {
  *	will be used in ht_capa.  Un-supported values will be ignored.
  * @ht_capa_mask:  The bits of ht_capa which are to be used.
  * @wep_keys: static WEP keys, if not NULL points to an array of
- * 	CFG80211_MAX_WEP_KEYS WEP keys
+ *	CFG80211_MAX_WEP_KEYS WEP keys
  * @wep_tx_key: key index (0..3) of the default TX static WEP key
  */
 struct cfg80211_ibss_params {
@@ -3369,6 +3404,8 @@ struct cfg80211_update_owe_info {
  * @set_default_key: set the default key on an interface
  *
  * @set_default_mgmt_key: set the default management frame key on an interface
+
+ * @set_default_beacon_key: set the default Beacon frame key on an interface
  *
  * @set_rekey_data: give the data necessary for GTK rekeying to the driver
  *
@@ -3669,6 +3706,10 @@ struct cfg80211_update_owe_info {
  *
  * @probe_mesh_link: Probe direct Mesh peer's link quality by sending data frame
  *	and overrule HWMP path selection algorithm.
+ * @set_tid_config: TID specific configuration, this can be peer or BSS specific
+ *	This callback may sleep.
+ * @reset_tid_config: Reset TID specific configuration for the peer, for the
+ *	given TIDs. This callback may sleep.
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -3702,6 +3743,9 @@ struct cfg80211_ops {
 	int	(*set_default_mgmt_key)(struct wiphy *wiphy,
 					struct net_device *netdev,
 					u8 key_index);
+	int	(*set_default_beacon_key)(struct wiphy *wiphy,
+					  struct net_device *netdev,
+					  u8 key_index);
 
 	int	(*start_ap)(struct wiphy *wiphy, struct net_device *dev,
 			    struct cfg80211_ap_settings *settings);
@@ -3974,8 +4018,7 @@ struct cfg80211_ops {
 	int	(*tx_control_port)(struct wiphy *wiphy,
 				   struct net_device *dev,
 				   const u8 *buf, size_t len,
-				   const u8 *dest, const u8 *src,
-				   const __be16 proto,
+				   const u8 *dest, const __be16 proto,
 				   const bool noencrypt);
 
 	int	(*get_ftm_responder_stats)(struct wiphy *wiphy,
@@ -3990,6 +4033,10 @@ struct cfg80211_ops {
 				   struct cfg80211_update_owe_info *owe_info);
 	int	(*probe_mesh_link)(struct wiphy *wiphy, struct net_device *dev,
 				   const u8 *buf, size_t len);
+	int     (*set_tid_config)(struct wiphy *wiphy, struct net_device *dev,
+				  struct cfg80211_tid_config *tid_conf);
+	int	(*reset_tid_config)(struct wiphy *wiphy, struct net_device *dev,
+				    const u8 *peer, u8 tids);
 };
 
 /*
@@ -4427,7 +4474,7 @@ struct wiphy_iftype_akm_suites {
  *	note that if your driver uses wiphy_apply_custom_regulatory()
  *	the reg_notifier's request can be passed as NULL
  * @regd: the driver's regulatory domain, if one was requested via
- * 	the regulatory_hint() API. This can be used by the driver
+ *	the regulatory_hint() API. This can be used by the driver
  *	on the reg_notifier() if it chooses to ignore future
  *	regulatory domain changes caused by other drivers.
  * @signal_type: signal type reported in &struct cfg80211_bss.
@@ -4463,10 +4510,11 @@ struct wiphy_iftype_akm_suites {
  *	the same number of arbitrary MAC addresses.
  * @registered: protects ->resume and ->suspend sysfs callbacks against
  *	unregister hardware
- * @debugfsdir: debugfs directory used for this wiphy, will be renamed
- *	automatically on wiphy renames
- * @dev: (virtual) struct device for this wiphy
- * @registered: helps synchronize suspend/resume with wiphy unregister
+ * @debugfsdir: debugfs directory used for this wiphy (ieee80211/<wiphyname>).
+ *	It will be renamed automatically on wiphy renames
+ * @dev: (virtual) struct device for this wiphy. The item in
+ *	/sys/class/ieee80211/ points to this. You need use set_wiphy_dev()
+ *	(see below).
  * @wext: wireless extension handlers
  * @priv: driver private data (sized according to wiphy_new() parameter)
  * @interface_modes: bitmask of interfaces types valid for this wiphy,
@@ -4577,12 +4625,6 @@ struct wiphy_iftype_akm_suites {
  *	and probe responses.  This value should be set if the driver
  *	wishes to limit the number of csa counters. Default (0) means
  *	infinite.
- * @max_adj_channel_rssi_comp: max offset of between the channel on which the
- *	frame was sent and the channel on which the frame was heard for which
- *	the reported rssi is still valid. If a driver is able to compensate the
- *	low rssi when a frame is heard on different channel, then it should set
- *	this variable to the maximal offset for which it can compensate.
- *	This value should be set in MHz.
  * @bss_select_support: bitmask indicating the BSS selection criteria supported
  *	by the driver in the .connect() callback. The bit position maps to the
  *	attribute indices defined in &enum nl80211_bss_select_attr.
@@ -4602,11 +4644,19 @@ struct wiphy_iftype_akm_suites {
  *	@support_mbssid must be set for this to have any effect.
  *
  * @pmsr_capa: peer measurement capabilities
+ *
+ * @tid_config_support: describes the per-TID config support that the
+ *	device has
+ * @tid_config_support.vif: bitmap of attributes (configurations)
+ *	supported by the driver for each vif
+ * @tid_config_support.peer: bitmap of attributes (configurations)
+ *	supported by the driver for each peer
+ * @tid_config_support.max_retry: maximum supported retry count for
+ *	long/short retry configuration
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
 
-	/* permanent MAC address(es) */
 	u8 perm_addr[ETH_ALEN];
 	u8 addr_mask[ETH_ALEN];
 
@@ -4673,11 +4723,6 @@ struct wiphy {
 	u32 available_antennas_tx;
 	u32 available_antennas_rx;
 
-	/*
-	 * Bitmap of supported protocols for probe response offloading
-	 * see &enum nl80211_probe_resp_offload_support_attr. Only valid
-	 * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set.
-	 */
 	u32 probe_resp_offload;
 
 	const u8 *extended_capabilities, *extended_capabilities_mask;
@@ -4686,16 +4731,10 @@ struct wiphy {
 	const struct wiphy_iftype_ext_capab *iftype_ext_capab;
 	unsigned int num_iftype_ext_capab;
 
-	/* If multiple wiphys are registered and you're handed e.g.
-	 * a regular netdev with assigned ieee80211_ptr, you won't
-	 * know whether it points to a wiphy your driver has registered
-	 * or not. Assign this to something global to your driver to
-	 * help determine whether you own this wiphy or not. */
 	const void *privid;
 
 	struct ieee80211_supported_band *bands[NUM_NL80211_BANDS];
 
-	/* Lets us get back the wiphy on the callback */
 	void (*reg_notifier)(struct wiphy *wiphy,
 			     struct regulatory_request *request);
 
@@ -4703,14 +4742,10 @@ struct wiphy {
 
 	const struct ieee80211_regdomain __rcu *regd;
 
-	/* the item in /sys/class/ieee80211/ points to this,
-	 * you need use set_wiphy_dev() (see below) */
 	struct device dev;
 
-	/* protects ->resume, ->suspend sysfs callbacks against unregister hw */
 	bool registered;
 
-	/* dir in debugfs: ieee80211/<wiphyname> */
 	struct dentry *debugfsdir;
 
 	const struct ieee80211_ht_cap *ht_capa_mod_mask;
@@ -4718,7 +4753,6 @@ struct wiphy {
 
 	struct list_head wdev_list;
 
-	/* the network namespace this phy lives in currently */
 	possible_net_t _net;
 
 #ifdef CONFIG_CFG80211_WEXT
@@ -4734,7 +4768,6 @@ struct wiphy {
 	u16 max_ap_assoc_sta;
 
 	u8 max_num_csa_counters;
-	u8 max_adj_channel_rssi_comp;
 
 	u32 bss_select_support;
 
@@ -4751,6 +4784,13 @@ struct wiphy {
 
 	const struct cfg80211_pmsr_capabilities *pmsr_capa;
 
+	struct {
+		u64 peer, vif;
+		u8 max_retry;
+	} tid_config_support;
+
+	u8 max_data_retry_count;
+
 	char priv[0] __aligned(NETDEV_ALIGN);
 };
 
@@ -5526,9 +5566,9 @@ void cfg80211_send_layer2_update(struct net_device *dev, const u8 *addr);
  * @wiphy: the wireless device giving the hint (used only for reporting
  *	conflicts)
  * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
- * 	should be in. If @rd is set this should be NULL. Note that if you
- * 	set this to NULL you should still set rd->alpha2 to some accepted
- * 	alpha2.
+ *	should be in. If @rd is set this should be NULL. Note that if you
+ *	set this to NULL you should still set rd->alpha2 to some accepted
+ *	alpha2.
  *
  * Wireless drivers can use this function to hint to the wireless core
  * what it believes should be the current regulatory domain by
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ce80773dfeb2..5ef34a2ba3c7 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3776,6 +3776,9 @@ enum ieee80211_reconfig_type {
  *
  * @start_pmsr: start peer measurement (e.g. FTM) (this call can sleep)
  * @abort_pmsr: abort peer measurement (this call can sleep)
+ * @set_tid_config: Apply TID specific configurations. This callback may sleep.
+ * @reset_tid_config: Reset TID specific configuration for the peer.
+ *	This callback may sleep.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -4080,6 +4083,13 @@ struct ieee80211_ops {
 			  struct cfg80211_pmsr_request *request);
 	void (*abort_pmsr)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			   struct cfg80211_pmsr_request *request);
+	int (*set_tid_config)(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
+			      struct ieee80211_sta *sta,
+			      struct cfg80211_tid_config *tid_conf);
+	int (*reset_tid_config)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct ieee80211_sta *sta, u8 tids);
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 158bccb4a47b..b002ef2060fa 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -265,6 +265,29 @@
  */
 
 /**
+ * DOC: TID configuration
+ *
+ * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG
+ * attribute given in wiphy capabilities.
+ *
+ * The necessary configuration parameters are mentioned in
+ * &enum nl80211_tid_config_attr and it will be passed to the
+ * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG.
+ *
+ * If the configuration needs to be applied for specific peer then the MAC
+ * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
+ * configuration will be applied for all the connected peers in the vif except
+ * any peers that have peer specific configuration for the TID by default; if
+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
+ * will be overwritten.
+ *
+ * All this configuration is valid only for STA's current connection
+ * i.e. the configuration will be reset to default when the STA connects back
+ * after disconnection/roaming, and this configuration will be cleared when
+ * the interface goes down.
+ */
+
+/**
  * enum nl80211_commands - supported nl80211 commands
  *
  * @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -1039,14 +1062,11 @@
  *	a control port frame and as a notification that a control port frame
  *	has been received. %NL80211_ATTR_FRAME is used to specify the
  *	frame contents.  The frame is the raw EAPoL data, without ethernet or
- *	802.11 headers. An optional %NL80211_ATTR_SRC_MAC can be used to send
- *	pre-auth frames to STAs on behalf of other APs.
+ *	802.11 headers.
  *	When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
  *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added
  *	indicating the protocol type of the received frame; whether the frame
  *	was received unencrypted and the MAC address of the peer respectively.
- *	%NL80211_ATTR_DST_MAC can be used to forward pre-auth frames in
- *	userspace while using AP mode.
  *
  * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
  *
@@ -1128,6 +1148,9 @@
  *	peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
  *	content. The frame is ethernet data.
  *
+ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
+ *	is passed using %NL80211_ATTR_TID_CONFIG attribute.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1352,6 +1375,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_PROBE_MESH_LINK,
 
+	NL80211_CMD_SET_TID_CONFIG,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -2412,8 +2437,10 @@ enum nl80211_commands {
  *	%NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not
  *	advertised for a specific interface type.
  *
- * @NL80211_ATTR_SRC_MAC: MAC address used in control port over nl80211 transmit
- * @NL80211_ATTR_DST_MAC: MAC address used in control port over nl80211 receive
+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
+ *	nested attribute with &enum nl80211_tid_config_attr sub-attributes;
+ *	on output (in wiphy attributes) it contains only the feature sub-
+ *	attributes.
  *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2883,8 +2910,7 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_IFTYPE_AKM_SUITES,
 
-	NL80211_ATTR_SRC_MAC,
-	NL80211_ATTR_DST_MAC,
+	NL80211_ATTR_TID_CONFIG,
 
 	/* add attributes here, update the policy in nl80211.c */
 
@@ -4559,6 +4585,7 @@ enum nl80211_key_default_types {
  *	See &enum nl80211_key_default_types.
  * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.
  *	Defaults to @NL80211_KEY_RX_TX.
+ * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key
  *
  * @__NL80211_KEY_AFTER_LAST: internal
  * @NL80211_KEY_MAX: highest key attribute
@@ -4574,6 +4601,7 @@ enum nl80211_key_attributes {
 	NL80211_KEY_TYPE,
 	NL80211_KEY_DEFAULT_TYPES,
 	NL80211_KEY_MODE,
+	NL80211_KEY_DEFAULT_BEACON,
 
 	/* keep last */
 	__NL80211_KEY_AFTER_LAST,
@@ -4730,6 +4758,69 @@ enum nl80211_tx_power_setting {
 };
 
 /**
+ * enum nl80211_tid_config - TID config state
+ * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
+ * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID
+ */
+enum nl80211_tid_config {
+	NL80211_TID_CONFIG_ENABLE,
+	NL80211_TID_CONFIG_DISABLE,
+};
+
+/* enum nl80211_tid_config_attr - TID specific configuration.
+ * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
+ * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported
+ *	for per-vif configuration; doesn't list the ones that are generic
+ *	(%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
+ * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
+ *	per peer instead.
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if no peer
+ *	is selected, if set indicates that the new configuration overrides
+ *	all previous peer configurations, otherwise previous peer specific
+ *	configurations should be left untouched. If peer is selected then
+ *	it will reset particular TID configuration of that peer and it will
+ *	not accept other TID config attributes along with peer.
+ * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7)
+ *	Its type is u16.
+ * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID.
+ *	specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config.
+ *	Its type is u8.
+ * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame
+ *	transmission, user-space sets this configuration in
+ *	&NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and
+ *	the max value is advertised by the driver in this attribute on
+ *	output in wiphy capabilities.
+ * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame
+ *	transmission, user-space sets this configuration in
+ *	&NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
+ *	the max value is advertised by the driver in this attribute on
+ *	output in wiphy capabilities.
+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable aggregation for the TIDs
+ *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. Its type is u8, using
+ *	the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs
+ *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using
+ *	the values from &nl80211_tid_config.
+ */
+enum nl80211_tid_config_attr {
+	__NL80211_TID_CONFIG_ATTR_INVALID,
+	NL80211_TID_CONFIG_ATTR_PAD,
+	NL80211_TID_CONFIG_ATTR_VIF_SUPP,
+	NL80211_TID_CONFIG_ATTR_PEER_SUPP,
+	NL80211_TID_CONFIG_ATTR_OVERRIDE,
+	NL80211_TID_CONFIG_ATTR_TIDS,
+	NL80211_TID_CONFIG_ATTR_NOACK,
+	NL80211_TID_CONFIG_ATTR_RETRY_SHORT,
+	NL80211_TID_CONFIG_ATTR_RETRY_LONG,
+	NL80211_TID_CONFIG_ATTR_AMPDU_CTRL,
+	NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL,
+
+	/* keep last */
+	__NL80211_TID_CONFIG_ATTR_AFTER_LAST,
+	NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_packet_pattern_attr - packet pattern attribute
  * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
  * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
@@ -5548,9 +5639,8 @@ enum nl80211_feature_flags {
  *	feature, which prevents bufferbloat by using the expected transmission
  *	time to limit the amount of data buffered in the hardware.
  *
- * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_MAC_ADDRS: The driver
- *	can use src and dst MAC addresses with control port over nl80211 rx
- *	and tx operations.
+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
+ *	and can receive key configuration for BIGTK using key indexes 6 and 7.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5599,7 +5689,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_SAE_OFFLOAD,
 	NL80211_EXT_FEATURE_VLAN_OFFLOAD,
 	NL80211_EXT_FEATURE_AQL,
-	NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_MAC_ADDRS,
+	NL80211_EXT_FEATURE_BEACON_PROTECTION,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,