Merge tag 'iio-for-6.12b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 2nd set of new device support features and cleanup for 6.12

Late pull request as I was planing to include another series that
is waiting for a fix to end up in char-misc-next.  That can wait
for next cycle.

Includes one immutable branch merge from MFD to get a necessary header
change.

Usual mix of a few new drivers, additional device support for existing
drivers, new features and a bunch of cleanup across tree.

New device support
==================

asahi-kasei,ak8975
- A few minor fixes as precursors to support for the AK09118 magnetometer
  that is very similar to the already supported AK09112
awinic,aw96103
- New driver for this capacitive proximity sensor.
x-powers,axp202
- Add support for the axp717 (including merge of MFD immutable branch).
sophgo,saradc
- New driver for this SOC ADC.

Features
========

adi,ad4695
- Add calibration support.
bosch,bmi323
- Ensure device is in lowest power state on suspend.

Cleanup and minor fixes
=======================
treewide
- Start to standardize formatting of id tables (ADC drivers done so far).
adi,ad5449
- Drop platform data support as long unused in upstream kernel.
bosch,bmc150
- Use fwnode_irq_get_by_name() in place of of_ variant.
- Use ACPI_HANDLE() to get the handle directly rather than via
  ACPI_COMPANION()
google,cros_ec_mkbp_proximity
- Include mod_devicetable.h instead of broader of.h
mirochip,mcp320x
- Drop vendorless compatible entries as not needed for backwards
  compatibility and should not be used in new boards.
st,lsm6dsx
- Use iio_read_acpi_mount_matrix() helper instead of open coding the
  same.
- Drop some unnecessary dev_fwnode() calls to check if a fwnode is
  available.  All the calls made handle this anyway.
xilinx,ams
- Use device_for_each_child_node_scoped() to avoid manual release of
  fwnode handle.

tools,generic-buffer
- Handle failure to allocate trigger name.
- Cleanup .*.cmd files if present.

* tag 'iio-for-6.12b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (28 commits)
  iio: adc: axp20x_adc: add support for AXP717 ADC
  dt-bindings: iio: adc: Add AXP717 compatible
  iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
  tools: iio: rm .*.cmd when make clean
  iio: adc: standardize on formatting for id match tables
  iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  dt-bindings: iio: aw96103: Add bindings for aw96103/aw96105 sensor
  iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC
  dt-bindings: iio: adc: sophgo,cv1800b-saradc: Add Sophgo CV1800B SARADC
  tools/iio: Add memory allocation failure check for trigger_name
  iio: imu: st_lsm6dsx: Remove useless dev_fwnode() calls
  iio: imu: st_lsm6dsx: Use iio_read_acpi_mount_matrix() helper
  iio: adc: mcp320x: Drop vendorless compatible strings
  iio: dac: ad5449: drop support for platform data
  iio: adc: xilinx-ams: use device_* to iterate over device child nodes
  iio: ABI: document ad4695 new attributes
  doc: iio: ad4695: update for calibration support
  iio: adc: ad4695: implement calibration support
  iio: adc: ad4695: add 2nd regmap for 16-bit registers
  iio: bmi323: peripheral in lowest power state on suspend
  ...

2 files changed, 26 insertions, 39 deletions

diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 8c0a33a2e9ce..9b7ef473adcb 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -115,6 +115,16 @@ enum axp20x_variants {
 #define AXP313A_IRQ_STATE		0x21
 
 #define AXP717_ON_INDICATE		0x00
+#define AXP717_PMU_STATUS_2		0x01
+#define AXP717_BC_DETECT		0x05
+#define AXP717_PMU_FAULT		0x08
+#define AXP717_MODULE_EN_CONTROL_1	0x0b
+#define AXP717_MIN_SYS_V_CONTROL	0x15
+#define AXP717_INPUT_VOL_LIMIT_CTRL	0x16
+#define AXP717_INPUT_CUR_LIMIT_CTRL	0x17
+#define AXP717_MODULE_EN_CONTROL_2	0x19
+#define AXP717_BOOST_CONTROL		0x1e
+#define AXP717_VSYS_V_POWEROFF		0x24
 #define AXP717_IRQ0_EN			0x40
 #define AXP717_IRQ1_EN			0x41
 #define AXP717_IRQ2_EN			0x42
@@ -125,6 +135,9 @@ enum axp20x_variants {
 #define AXP717_IRQ2_STATE		0x4a
 #define AXP717_IRQ3_STATE		0x4b
 #define AXP717_IRQ4_STATE		0x4c
+#define AXP717_ICC_CHG_SET		0x62
+#define AXP717_ITERM_CHG_SET		0x63
+#define AXP717_CV_CHG_SET		0x64
 #define AXP717_DCDC_OUTPUT_CONTROL	0x80
 #define AXP717_DCDC1_CONTROL		0x83
 #define AXP717_DCDC2_CONTROL		0x84
@@ -145,6 +158,19 @@ enum axp20x_variants {
 #define AXP717_CLDO3_CONTROL		0x9d
 #define AXP717_CLDO4_CONTROL		0x9e
 #define AXP717_CPUSLDO_CONTROL		0x9f
+#define AXP717_BATT_PERCENT_DATA	0xa4
+#define AXP717_ADC_CH_EN_CONTROL	0xc0
+#define AXP717_BATT_V_H			0xc4
+#define AXP717_BATT_V_L			0xc5
+#define AXP717_VBUS_V_H			0xc6
+#define AXP717_VBUS_V_L			0xc7
+#define AXP717_VSYS_V_H			0xc8
+#define AXP717_VSYS_V_L			0xc9
+#define AXP717_BATT_CHRG_I_H		0xca
+#define AXP717_BATT_CHRG_I_L		0xcb
+#define AXP717_ADC_DATA_SEL		0xcd
+#define AXP717_ADC_DATA_H		0xce
+#define AXP717_ADC_DATA_L		0xcf
 
 #define AXP806_STARTUP_SRC		0x00
 #define AXP806_CHIP_ID			0x03
diff --git a/include/linux/platform_data/ad5449.h b/include/linux/platform_data/ad5449.h
deleted file mode 100644
index d687ef5726c2..000000000000
--- a/include/linux/platform_data/ad5449.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog
- * Converter driver.
- *
- * Copyright 2012 Analog Devices Inc.
- *  Author: Lars-Peter Clausen <lars@metafoo.de>
- */
-
-#ifndef __LINUX_PLATFORM_DATA_AD5449_H__
-#define __LINUX_PLATFORM_DATA_AD5449_H__
-
-/**
- * enum ad5449_sdo_mode - AD5449 SDO pin configuration
- * @AD5449_SDO_DRIVE_FULL: Drive the SDO pin with full strength.
- * @AD5449_SDO_DRIVE_WEAK: Drive the SDO pin with not full strength.
- * @AD5449_SDO_OPEN_DRAIN: Operate the SDO pin in open-drain mode.
- * @AD5449_SDO_DISABLED: Disable the SDO pin, in this mode it is not possible to
- *			read back from the device.
- */
-enum ad5449_sdo_mode {
-	AD5449_SDO_DRIVE_FULL = 0x0,
-	AD5449_SDO_DRIVE_WEAK = 0x1,
-	AD5449_SDO_OPEN_DRAIN = 0x2,
-	AD5449_SDO_DISABLED = 0x3,
-};
-
-/**
- * struct ad5449_platform_data - Platform data for the ad5449 DAC driver
- * @sdo_mode: SDO pin mode
- * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the
- *			outputs to midscale (true) or to zero scale(false).
- */
-struct ad5449_platform_data {
-	enum ad5449_sdo_mode sdo_mode;
-	bool hardware_clear_to_midscale;
-};
-
-#endif