md: move the early init autodetect code to drivers/md/

Just like the NFS and CIFS root code this better lives with the
driver it is tightly integrated with.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 304 deletions

diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c
deleted file mode 100644
index 359363e85ccd..000000000000
--- a/init/do_mounts_md.c
+++ /dev/null
@@ -1,304 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/delay.h>
-#include <linux/raid/md_u.h>
-#include <linux/raid/md_p.h>
-
-#include "do_mounts.h"
-
-/*
- * When md (and any require personalities) are compiled into the kernel
- * (not a module), arrays can be assembles are boot time using with AUTODETECT
- * where specially marked partitions are registered with md_autodetect_dev(),
- * and with MD_BOOT where devices to be collected are given on the boot line
- * with md=.....
- * The code for that is here.
- */
-
-#ifdef CONFIG_MD_AUTODETECT
-static int __initdata raid_noautodetect;
-#else
-static int __initdata raid_noautodetect=1;
-#endif
-static int __initdata raid_autopart;
-
-static struct {
-	int minor;
-	int partitioned;
-	int level;
-	int chunk;
-	char *device_names;
-} md_setup_args[256] __initdata;
-
-static int md_setup_ents __initdata;
-
-/*
- * Parse the command-line parameters given our kernel, but do not
- * actually try to invoke the MD device now; that is handled by
- * md_setup_drive after the low-level disk drivers have initialised.
- *
- * 27/11/1999: Fixed to work correctly with the 2.3 kernel (which
- *             assigns the task of parsing integer arguments to the
- *             invoked program now).  Added ability to initialise all
- *             the MD devices (by specifying multiple "md=" lines)
- *             instead of just one.  -- KTK
- * 18May2000: Added support for persistent-superblock arrays:
- *             md=n,0,factor,fault,device-list   uses RAID0 for device n
- *             md=n,-1,factor,fault,device-list  uses LINEAR for device n
- *             md=n,device-list      reads a RAID superblock from the devices
- *             elements in device-list are read by name_to_kdev_t so can be
- *             a hex number or something like /dev/hda1 /dev/sdb
- * 2001-06-03: Dave Cinege <dcinege@psychosis.com>
- *		Shifted name_to_kdev_t() and related operations to md_set_drive()
- *		for later execution. Rewrote section to make devfs compatible.
- */
-static int __init md_setup(char *str)
-{
-	int minor, level, factor, fault, partitioned = 0;
-	char *pername = "";
-	char *str1;
-	int ent;
-
-	if (*str == 'd') {
-		partitioned = 1;
-		str++;
-	}
-	if (get_option(&str, &minor) != 2) {	/* MD Number */
-		printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
-		return 0;
-	}
-	str1 = str;
-	for (ent=0 ; ent< md_setup_ents ; ent++)
-		if (md_setup_args[ent].minor == minor &&
-		    md_setup_args[ent].partitioned == partitioned) {
-			printk(KERN_WARNING "md: md=%s%d, Specified more than once. "
-			       "Replacing previous definition.\n", partitioned?"d":"", minor);
-			break;
-		}
-	if (ent >= ARRAY_SIZE(md_setup_args)) {
-		printk(KERN_WARNING "md: md=%s%d - too many md initialisations\n", partitioned?"d":"", minor);
-		return 0;
-	}
-	if (ent >= md_setup_ents)
-		md_setup_ents++;
-	switch (get_option(&str, &level)) {	/* RAID level */
-	case 2: /* could be 0 or -1.. */
-		if (level == 0 || level == LEVEL_LINEAR) {
-			if (get_option(&str, &factor) != 2 ||	/* Chunk Size */
-					get_option(&str, &fault) != 2) {
-				printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
-				return 0;
-			}
-			md_setup_args[ent].level = level;
-			md_setup_args[ent].chunk = 1 << (factor+12);
-			if (level ==  LEVEL_LINEAR)
-				pername = "linear";
-			else
-				pername = "raid0";
-			break;
-		}
-		/* FALL THROUGH */
-	case 1: /* the first device is numeric */
-		str = str1;
-		/* FALL THROUGH */
-	case 0:
-		md_setup_args[ent].level = LEVEL_NONE;
-		pername="super-block";
-	}
-
-	printk(KERN_INFO "md: Will configure md%d (%s) from %s, below.\n",
-		minor, pername, str);
-	md_setup_args[ent].device_names = str;
-	md_setup_args[ent].partitioned = partitioned;
-	md_setup_args[ent].minor = minor;
-
-	return 1;
-}
-
-static void __init md_setup_drive(void)
-{
-	int minor, i, ent, partitioned;
-	dev_t dev;
-	dev_t devices[MD_SB_DISKS+1];
-
-	for (ent = 0; ent < md_setup_ents ; ent++) {
-		int fd;
-		int err = 0;
-		char *devname;
-		mdu_disk_info_t dinfo;
-		char name[16];
-
-		minor = md_setup_args[ent].minor;
-		partitioned = md_setup_args[ent].partitioned;
-		devname = md_setup_args[ent].device_names;
-
-		sprintf(name, "/dev/md%s%d", partitioned?"_d":"", minor);
-		if (partitioned)
-			dev = MKDEV(mdp_major, minor << MdpMinorShift);
-		else
-			dev = MKDEV(MD_MAJOR, minor);
-		create_dev(name, dev);
-		for (i = 0; i < MD_SB_DISKS && devname != NULL; i++) {
-			struct kstat stat;
-			char *p;
-			char comp_name[64];
-
-			p = strchr(devname, ',');
-			if (p)
-				*p++ = 0;
-
-			dev = name_to_dev_t(devname);
-			if (strncmp(devname, "/dev/", 5) == 0)
-				devname += 5;
-			snprintf(comp_name, 63, "/dev/%s", devname);
-			if (vfs_stat(comp_name, &stat) == 0 &&
-			    S_ISBLK(stat.mode))
-				dev = new_decode_dev(stat.rdev);
-			if (!dev) {
-				printk(KERN_WARNING "md: Unknown device name: %s\n", devname);
-				break;
-			}
-
-			devices[i] = dev;
-
-			devname = p;
-		}
-		devices[i] = 0;
-
-		if (!i)
-			continue;
-
-		printk(KERN_INFO "md: Loading md%s%d: %s\n",
-			partitioned ? "_d" : "", minor,
-			md_setup_args[ent].device_names);
-
-		fd = ksys_open(name, 0, 0);
-		if (fd < 0) {
-			printk(KERN_ERR "md: open failed - cannot start "
-					"array %s\n", name);
-			continue;
-		}
-		if (ksys_ioctl(fd, SET_ARRAY_INFO, 0) == -EBUSY) {
-			printk(KERN_WARNING
-			       "md: Ignoring md=%d, already autodetected. (Use raid=noautodetect)\n",
-			       minor);
-			ksys_close(fd);
-			continue;
-		}
-
-		if (md_setup_args[ent].level != LEVEL_NONE) {
-			/* non-persistent */
-			mdu_array_info_t ainfo;
-			ainfo.level = md_setup_args[ent].level;
-			ainfo.size = 0;
-			ainfo.nr_disks =0;
-			ainfo.raid_disks =0;
-			while (devices[ainfo.raid_disks])
-				ainfo.raid_disks++;
-			ainfo.md_minor =minor;
-			ainfo.not_persistent = 1;
-
-			ainfo.state = (1 << MD_SB_CLEAN);
-			ainfo.layout = 0;
-			ainfo.chunk_size = md_setup_args[ent].chunk;
-			err = ksys_ioctl(fd, SET_ARRAY_INFO, (long)&ainfo);
-			for (i = 0; !err && i <= MD_SB_DISKS; i++) {
-				dev = devices[i];
-				if (!dev)
-					break;
-				dinfo.number = i;
-				dinfo.raid_disk = i;
-				dinfo.state = (1<<MD_DISK_ACTIVE)|(1<<MD_DISK_SYNC);
-				dinfo.major = MAJOR(dev);
-				dinfo.minor = MINOR(dev);
-				err = ksys_ioctl(fd, ADD_NEW_DISK,
-						 (long)&dinfo);
-			}
-		} else {
-			/* persistent */
-			for (i = 0; i <= MD_SB_DISKS; i++) {
-				dev = devices[i];
-				if (!dev)
-					break;
-				dinfo.major = MAJOR(dev);
-				dinfo.minor = MINOR(dev);
-				ksys_ioctl(fd, ADD_NEW_DISK, (long)&dinfo);
-			}
-		}
-		if (!err)
-			err = ksys_ioctl(fd, RUN_ARRAY, 0);
-		if (err)
-			printk(KERN_WARNING "md: starting md%d failed\n", minor);
-		else {
-			/* reread the partition table.
-			 * I (neilb) and not sure why this is needed, but I cannot
-			 * boot a kernel with devfs compiled in from partitioned md
-			 * array without it
-			 */
-			ksys_close(fd);
-			fd = ksys_open(name, 0, 0);
-			ksys_ioctl(fd, BLKRRPART, 0);
-		}
-		ksys_close(fd);
-	}
-}
-
-static int __init raid_setup(char *str)
-{
-	int len, pos;
-
-	len = strlen(str) + 1;
-	pos = 0;
-
-	while (pos < len) {
-		char *comma = strchr(str+pos, ',');
-		int wlen;
-		if (comma)
-			wlen = (comma-str)-pos;
-		else	wlen = (len-1)-pos;
-
-		if (!strncmp(str, "noautodetect", wlen))
-			raid_noautodetect = 1;
-		if (!strncmp(str, "autodetect", wlen))
-			raid_noautodetect = 0;
-		if (strncmp(str, "partitionable", wlen)==0)
-			raid_autopart = 1;
-		if (strncmp(str, "part", wlen)==0)
-			raid_autopart = 1;
-		pos += wlen+1;
-	}
-	return 1;
-}
-
-__setup("raid=", raid_setup);
-__setup("md=", md_setup);
-
-static void __init autodetect_raid(void)
-{
-	int fd;
-
-	/*
-	 * Since we don't want to detect and use half a raid array, we need to
-	 * wait for the known devices to complete their probing
-	 */
-	printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n");
-	printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n");
-
-	wait_for_device_probe();
-
-	fd = ksys_open("/dev/md0", 0, 0);
-	if (fd >= 0) {
-		ksys_ioctl(fd, RAID_AUTORUN, raid_autopart);
-		ksys_close(fd);
-	}
-}
-
-void __init md_run_setup(void)
-{
-	create_dev("/dev/md0", MKDEV(MD_MAJOR, 0));
-
-	if (raid_noautodetect)
-		printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=autodetect will force)\n");
-	else
-		autodetect_raid();
-	md_setup_drive();
-}