Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

12 files changed, 3315 insertions, 0 deletions

diff --git a/init/Kconfig b/init/Kconfig
new file mode 100644
index 000000000000..abe2682a6ca6
--- /dev/null
+++ b/init/Kconfig
@@ -0,0 +1,463 @@
+menu "Code maturity level options"
+
+config EXPERIMENTAL
+	bool "Prompt for development and/or incomplete code/drivers"
+	---help---
+	  Some of the various things that Linux supports (such as network
+	  drivers, file systems, network protocols, etc.) can be in a state
+	  of development where the functionality, stability, or the level of
+	  testing is not yet high enough for general use. This is usually
+	  known as the "alpha-test" phase among developers. If a feature is
+	  currently in alpha-test, then the developers usually discourage
+	  uninformed widespread use of this feature by the general public to
+	  avoid "Why doesn't this work?" type mail messages. However, active
+	  testing and use of these systems is welcomed. Just be aware that it
+	  may not meet the normal level of reliability or it may fail to work
+	  in some special cases. Detailed bug reports from people familiar
+	  with the kernel internals are usually welcomed by the developers
+	  (before submitting bug reports, please read the documents
+	  <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>,
+	  <file:Documentation/BUG-HUNTING>, and
+	  <file:Documentation/oops-tracing.txt> in the kernel source).
+
+	  This option will also make obsoleted drivers available. These are
+	  drivers that have been replaced by something else, and/or are
+	  scheduled to be removed in a future kernel release.
+
+	  Unless you intend to help test and develop a feature or driver that
+	  falls into this category, or you have a situation that requires
+	  using these features, you should probably say N here, which will
+	  cause the configurator to present you with fewer choices. If
+	  you say Y here, you will be offered the choice of using features or
+	  drivers that are currently considered to be in the alpha-test phase.
+
+config CLEAN_COMPILE
+	bool "Select only drivers expected to compile cleanly" if EXPERIMENTAL
+	default y
+	help
+	  Select this option if you don't even want to see the option
+	  to configure known-broken drivers.
+
+	  If unsure, say Y
+
+config BROKEN
+	bool
+	depends on !CLEAN_COMPILE
+	default y
+
+config BROKEN_ON_SMP
+	bool
+	depends on BROKEN || !SMP
+	default y
+
+config LOCK_KERNEL
+	bool
+	depends on SMP || PREEMPT
+	default y
+
+config INIT_ENV_ARG_LIMIT
+	int
+	default 32 if !USERMODE
+	default 128 if USERMODE
+	help
+	  This is the value of the two limits on the number of argument and of
+	  env.var passed to init from the kernel command line.
+
+endmenu
+
+menu "General setup"
+
+config LOCALVERSION
+	string "Local version - append to kernel release"
+	help
+	  Append an extra string to the end of your kernel version.
+	  This will show up when you type uname, for example.
+	  The string you set here will be appended after the contents of
+	  any files with a filename matching localversion* in your
+	  object and source tree, in that order.  Your total string can
+	  be a maximum of 64 characters.
+
+config SWAP
+	bool "Support for paging of anonymous memory (swap)"
+	depends on MMU
+	default y
+	help
+	  This option allows you to choose whether you want to have support
+	  for socalled swap devices or swap files in your kernel that are
+	  used to provide more virtual memory than the actual RAM present
+	  in your computer.  If unsure say Y.
+
+config SYSVIPC
+	bool "System V IPC"
+	depends on MMU
+	---help---
+	  Inter Process Communication is a suite of library functions and
+	  system calls which let processes (running programs) synchronize and
+	  exchange information. It is generally considered to be a good thing,
+	  and some programs won't run unless you say Y here. In particular, if
+	  you want to run the DOS emulator dosemu under Linux (read the
+	  DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
+	  you'll need to say Y here.
+
+	  You can find documentation about IPC with "info ipc" and also in
+	  section 6.4 of the Linux Programmer's Guide, available from
+	  <http://www.tldp.org/guides.html>.
+
+config POSIX_MQUEUE
+	bool "POSIX Message Queues"
+	depends on NET && EXPERIMENTAL
+	---help---
+	  POSIX variant of message queues is a part of IPC. In POSIX message
+	  queues every message has a priority which decides about succession
+	  of receiving it by a process. If you want to compile and run
+	  programs written e.g. for Solaris with use of its POSIX message
+	  queues (functions mq_*) say Y here. To use this feature you will
+	  also need mqueue library, available from
+	  <http://www.mat.uni.torun.pl/~wrona/posix_ipc/>
+
+	  POSIX message queues are visible as a filesystem called 'mqueue'
+	  and can be mounted somewhere if you want to do filesystem
+	  operations on message queues.
+
+	  If unsure, say Y.
+
+config BSD_PROCESS_ACCT
+	bool "BSD Process Accounting"
+	help
+	  If you say Y here, a user level program will be able to instruct the
+	  kernel (via a special system call) to write process accounting
+	  information to a file: whenever a process exits, information about
+	  that process will be appended to the file by the kernel.  The
+	  information includes things such as creation time, owning user,
+	  command name, memory usage, controlling terminal etc. (the complete
+	  list is in the struct acct in <file:include/linux/acct.h>).  It is
+	  up to the user level program to do useful things with this
+	  information.  This is generally a good idea, so say Y.
+
+config BSD_PROCESS_ACCT_V3
+	bool "BSD Process Accounting version 3 file format"
+	depends on BSD_PROCESS_ACCT
+	default n
+	help
+	  If you say Y here, the process accounting information is written
+	  in a new file format that also logs the process IDs of each
+	  process and it's parent. Note that this file format is incompatible
+	  with previous v0/v1/v2 file formats, so you will need updated tools
+	  for processing it. A preliminary version of these tools is available
+	  at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>.
+
+config SYSCTL
+	bool "Sysctl support"
+	---help---
+	  The sysctl interface provides a means of dynamically changing
+	  certain kernel parameters and variables on the fly without requiring
+	  a recompile of the kernel or reboot of the system.  The primary
+	  interface consists of a system call, but if you say Y to "/proc
+	  file system support", a tree of modifiable sysctl entries will be
+	  generated beneath the /proc/sys directory. They are explained in the
+	  files in <file:Documentation/sysctl/>.  Note that enabling this
+	  option will enlarge the kernel by at least 8 KB.
+
+	  As it is generally a good thing, you should say Y here unless
+	  building a kernel for install/rescue disks or your system is very
+	  limited in memory.
+
+config AUDIT
+	bool "Auditing support"
+	default y if SECURITY_SELINUX
+	help
+	  Enable auditing infrastructure that can be used with another
+	  kernel subsystem, such as SELinux (which requires this for
+	  logging of avc messages output).  Does not do system-call
+	  auditing without CONFIG_AUDITSYSCALL.
+
+config AUDITSYSCALL
+	bool "Enable system-call auditing support"
+	depends on AUDIT && (X86 || PPC64 || ARCH_S390 || IA64)
+	default y if SECURITY_SELINUX
+	help
+	  Enable low-overhead system-call auditing infrastructure that
+	  can be used independently or with another kernel subsystem,
+	  such as SELinux.
+
+config HOTPLUG
+	bool "Support for hot-pluggable devices" if !ARCH_S390
+	default ARCH_S390
+	help
+	  This option is provided for the case where no in-kernel-tree
+	  modules require HOTPLUG functionality, but a module built
+	  outside the kernel tree does. Such modules require Y here.
+
+config KOBJECT_UEVENT
+	bool "Kernel Userspace Events"
+	depends on NET
+	default y
+	help
+	  This option enables the kernel userspace event layer, which is a
+	  simple mechanism for kernel-to-user communication over a netlink
+	  socket.
+	  The goal of the kernel userspace events layer is to provide a simple
+	  and efficient events system, that notifies userspace about kobject
+	  state changes. This will enable applications to just listen for
+	  events instead of polling system devices and files.
+	  Hotplug events (kobject addition and removal) are also available on
+	  the netlink socket in addition to the execution of /sbin/hotplug if
+	  CONFIG_HOTPLUG is enabled.
+
+	  Say Y, unless you are building a system requiring minimal memory
+	  consumption.
+
+config IKCONFIG
+	bool "Kernel .config support"
+	---help---
+	  This option enables the complete Linux kernel ".config" file
+	  contents to be saved in the kernel. It provides documentation
+	  of which kernel options are used in a running kernel or in an
+	  on-disk kernel.  This information can be extracted from the kernel
+	  image file with the script scripts/extract-ikconfig and used as
+	  input to rebuild the current kernel or to build another kernel.
+	  It can also be extracted from a running kernel by reading
+	  /proc/config.gz if enabled (below).
+
+config IKCONFIG_PROC
+	bool "Enable access to .config through /proc/config.gz"
+	depends on IKCONFIG && PROC_FS
+	---help---
+	  This option enables access to the kernel configuration file
+	  through /proc/config.gz.
+
+config CPUSETS
+	bool "Cpuset support"
+	depends on SMP
+	help
+	  This options will let you create and manage CPUSET's which
+	  allow dynamically partitioning a system into sets of CPUs and
+	  Memory Nodes and assigning tasks to run only within those sets.
+	  This is primarily useful on large SMP or NUMA systems.
+
+	  Say N if unsure.
+
+menuconfig EMBEDDED
+	bool "Configure standard kernel features (for small systems)"
+	help
+	  This option allows certain base kernel options and settings
+          to be disabled or tweaked. This is for specialized
+          environments which can tolerate a "non-standard" kernel.
+          Only use this if you really know what you are doing.
+
+config KALLSYMS
+	 bool "Load all symbols for debugging/kksymoops" if EMBEDDED
+	 default y
+	 help
+	   Say Y here to let the kernel print out symbolic crash information and
+	   symbolic stack backtraces. This increases the size of the kernel
+	   somewhat, as all symbols have to be loaded into the kernel image.
+
+config KALLSYMS_ALL
+	bool "Include all symbols in kallsyms"
+	depends on DEBUG_KERNEL && KALLSYMS
+	help
+	   Normally kallsyms only contains the symbols of functions, for nicer
+	   OOPS messages.  Some debuggers can use kallsyms for other
+	   symbols too: say Y here to include all symbols, and you
+	   don't care about adding 300k to the size of your kernel.
+
+	   Say N.
+
+config KALLSYMS_EXTRA_PASS
+	bool "Do an extra kallsyms pass"
+	depends on KALLSYMS
+	help
+	   If kallsyms is not working correctly, the build will fail with
+	   inconsistent kallsyms data.  If that occurs, log a bug report and
+	   turn on KALLSYMS_EXTRA_PASS which should result in a stable build.
+	   Always say N here unless you find a bug in kallsyms, which must be
+	   reported.  KALLSYMS_EXTRA_PASS is only a temporary workaround while
+	   you wait for kallsyms to be fixed.
+
+config BASE_FULL
+	default y
+	bool "Enable full-sized data structures for core" if EMBEDDED
+	help
+	  Disabling this option reduces the size of miscellaneous core
+	  kernel data structures. This saves memory on small machines,
+	  but may reduce performance.
+
+config FUTEX
+	bool "Enable futex support" if EMBEDDED
+	default y
+	help
+	  Disabling this option will cause the kernel to be built without
+	  support for "fast userspace mutexes".  The resulting kernel may not
+	  run glibc-based applications correctly.
+
+config EPOLL
+	bool "Enable eventpoll support" if EMBEDDED
+	default y
+	help
+	  Disabling this option will cause the kernel to be built without
+	  support for epoll family of system calls.
+
+config CC_OPTIMIZE_FOR_SIZE
+	bool "Optimize for size" if EMBEDDED
+	default y if ARM || H8300
+	help
+	  Enabling this option will pass "-Os" instead of "-O2" to gcc
+	  resulting in a smaller kernel.
+
+	  WARNING: some versions of gcc may generate incorrect code with this
+	  option.  If problems are observed, a gcc upgrade may be needed.
+
+	  If unsure, say N.
+
+config SHMEM
+	bool "Use full shmem filesystem" if EMBEDDED
+	default y
+	depends on MMU
+	help
+	  The shmem is an internal filesystem used to manage shared memory.
+	  It is backed by swap and manages resource limits. It is also exported
+	  to userspace as tmpfs if TMPFS is enabled. Disabling this
+	  option replaces shmem and tmpfs with the much simpler ramfs code,
+	  which may be appropriate on small systems without swap.
+
+config CC_ALIGN_FUNCTIONS
+	int "Function alignment" if EMBEDDED
+	default 0
+	help
+	  Align the start of functions to the next power-of-two greater than n,
+	  skipping up to n bytes.  For instance, 32 aligns functions
+	  to the next 32-byte boundary, but 24 would align to the next
+	  32-byte boundary only if this can be done by skipping 23 bytes or less.
+	  Zero means use compiler's default.
+
+config CC_ALIGN_LABELS
+	int "Label alignment" if EMBEDDED
+	default 0
+	help
+	  Align all branch targets to a power-of-two boundary, skipping
+	  up to n bytes like ALIGN_FUNCTIONS.  This option can easily
+	  make code slower, because it must insert dummy operations for
+	  when the branch target is reached in the usual flow of the code.
+	  Zero means use compiler's default.
+
+config CC_ALIGN_LOOPS
+	int "Loop alignment" if EMBEDDED
+	default 0
+	help
+	  Align loops to a power-of-two boundary, skipping up to n bytes.
+	  Zero means use compiler's default.
+
+config CC_ALIGN_JUMPS
+	int "Jump alignment" if EMBEDDED
+	default 0
+	help
+	  Align branch targets to a power-of-two boundary, for branch
+	  targets where the targets can only be reached by jumping,
+	  skipping up to n bytes like ALIGN_FUNCTIONS.  In this case,
+	  no dummy operations need be executed.
+	  Zero means use compiler's default.
+
+endmenu		# General setup
+
+config TINY_SHMEM
+	default !SHMEM
+	bool
+
+config BASE_SMALL
+	int
+	default 0 if BASE_FULL
+	default 1 if !BASE_FULL
+
+menu "Loadable module support"
+
+config MODULES
+	bool "Enable loadable module support"
+	help
+	  Kernel modules are small pieces of compiled code which can
+	  be inserted in the running kernel, rather than being
+	  permanently built into the kernel.  You use the "modprobe"
+	  tool to add (and sometimes remove) them.  If you say Y here,
+	  many parts of the kernel can be built as modules (by
+	  answering M instead of Y where indicated): this is most
+	  useful for infrequently used options which are not required
+	  for booting.  For more information, see the man pages for
+	  modprobe, lsmod, modinfo, insmod and rmmod.
+
+	  If you say Y here, you will need to run "make
+	  modules_install" to put the modules under /lib/modules/
+	  where modprobe can find them (you may need to be root to do
+	  this).
+
+	  If unsure, say Y.
+
+config MODULE_UNLOAD
+	bool "Module unloading"
+	depends on MODULES
+	help
+	  Without this option you will not be able to unload any
+	  modules (note that some modules may not be unloadable
+	  anyway), which makes your kernel slightly smaller and
+	  simpler.  If unsure, say Y.
+
+config MODULE_FORCE_UNLOAD
+	bool "Forced module unloading"
+	depends on MODULE_UNLOAD && EXPERIMENTAL
+	help
+	  This option allows you to force a module to unload, even if the
+	  kernel believes it is unsafe: the kernel will remove the module
+	  without waiting for anyone to stop using it (using the -f option to
+	  rmmod).  This is mainly for kernel developers and desperate users.
+	  If unsure, say N.
+
+config OBSOLETE_MODPARM
+	bool
+	default y
+	depends on MODULES
+	help
+	  You need this option to use module parameters on modules which
+	  have not been converted to the new module parameter system yet.
+	  If unsure, say Y.
+
+config MODVERSIONS
+	bool "Module versioning support (EXPERIMENTAL)"
+	depends on MODULES && EXPERIMENTAL && !UML
+	help
+	  Usually, you have to use modules compiled with your kernel.
+	  Saying Y here makes it sometimes possible to use modules
+	  compiled for different kernels, by adding enough information
+	  to the modules to (hopefully) spot any changes which would
+	  make them incompatible with the kernel you are running.  If
+	  unsure, say N.
+
+config MODULE_SRCVERSION_ALL
+	bool "Source checksum for all modules"
+	depends on MODULES
+	help
+	  Modules which contain a MODULE_VERSION get an extra "srcversion"
+	  field inserted into their modinfo section, which contains a
+    	  sum of the source files which made it.  This helps maintainers
+	  see exactly which source was used to build a module (since
+	  others sometimes change the module source without updating
+	  the version).  With this option, such a "srcversion" field
+	  will be created for all modules.  If unsure, say N.
+
+config KMOD
+	bool "Automatic kernel module loading"
+	depends on MODULES
+	help
+	  Normally when you have selected some parts of the kernel to
+	  be created as kernel modules, you must load them (using the
+	  "modprobe" command) before you can use them. If you say Y
+	  here, some parts of the kernel will be able to load modules
+	  automatically: when a part of the kernel needs a module, it
+	  runs modprobe with the appropriate arguments, thereby
+	  loading the module if it is available.  If unsure, say Y.
+
+config STOP_MACHINE
+	bool
+	default y
+	depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
+	help
+	  Need stop_machine() primitive.
+endmenu
diff --git a/init/Makefile b/init/Makefile
new file mode 100644
index 000000000000..93a53fbdbe79
--- /dev/null
+++ b/init/Makefile
@@ -0,0 +1,28 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y				:= main.o version.o mounts.o initramfs.o
+obj-$(CONFIG_GENERIC_CALIBRATE_DELAY) += calibrate.o
+
+mounts-y			:= do_mounts.o
+mounts-$(CONFIG_DEVFS_FS)	+= do_mounts_devfs.o
+mounts-$(CONFIG_BLK_DEV_RAM)	+= do_mounts_rd.o
+mounts-$(CONFIG_BLK_DEV_INITRD)	+= do_mounts_initrd.o
+mounts-$(CONFIG_BLK_DEV_MD)	+= do_mounts_md.o
+
+# files to be removed upon make clean
+clean-files := ../include/linux/compile.h
+
+# dependencies on generated files need to be listed explicitly
+
+$(obj)/version.o: include/linux/compile.h
+
+# compile.h changes depending on hostname, generation number, etc,
+# so we regenerate it always.
+# mkcompile_h will make sure to only update the
+# actual file if its content has changed.
+
+include/linux/compile.h: FORCE
+	@echo '  CHK     $@'
+	@$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ "$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CC) $(CFLAGS)"
diff --git a/init/calibrate.c b/init/calibrate.c
new file mode 100644
index 000000000000..c698e04a3dbe
--- /dev/null
+++ b/init/calibrate.c
@@ -0,0 +1,79 @@
+/* calibrate.c: default delay calibration
+ *
+ * Excised from init/main.c
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ */
+
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+static unsigned long preset_lpj;
+static int __init lpj_setup(char *str)
+{
+	preset_lpj = simple_strtoul(str,NULL,0);
+	return 1;
+}
+
+__setup("lpj=", lpj_setup);
+
+/*
+ * This is the number of bits of precision for the loops_per_jiffy.  Each
+ * bit takes on average 1.5/HZ seconds.  This (like the original) is a little
+ * better than 1%
+ */
+#define LPS_PREC 8
+
+void __devinit calibrate_delay(void)
+{
+	unsigned long ticks, loopbit;
+	int lps_precision = LPS_PREC;
+
+	if (preset_lpj) {
+		loops_per_jiffy = preset_lpj;
+		printk("Calibrating delay loop (skipped)... "
+			"%lu.%02lu BogoMIPS preset\n",
+			loops_per_jiffy/(500000/HZ),
+			(loops_per_jiffy/(5000/HZ)) % 100);
+	} else {
+		loops_per_jiffy = (1<<12);
+
+		printk(KERN_DEBUG "Calibrating delay loop... ");
+		while ((loops_per_jiffy <<= 1) != 0) {
+			/* wait for "start of" clock tick */
+			ticks = jiffies;
+			while (ticks == jiffies)
+				/* nothing */;
+			/* Go .. */
+			ticks = jiffies;
+			__delay(loops_per_jiffy);
+			ticks = jiffies - ticks;
+			if (ticks)
+				break;
+		}
+
+		/*
+		 * Do a binary approximation to get loops_per_jiffy set to
+		 * equal one clock (up to lps_precision bits)
+		 */
+		loops_per_jiffy >>= 1;
+		loopbit = loops_per_jiffy;
+		while (lps_precision-- && (loopbit >>= 1)) {
+			loops_per_jiffy |= loopbit;
+			ticks = jiffies;
+			while (ticks == jiffies)
+				/* nothing */;
+			ticks = jiffies;
+			__delay(loops_per_jiffy);
+			if (jiffies != ticks)	/* longer than 1 tick */
+				loops_per_jiffy &= ~loopbit;
+		}
+
+		/* Round the value and print it */
+		printk("%lu.%02lu BogoMIPS (lpj=%lu)\n",
+			loops_per_jiffy/(500000/HZ),
+			(loops_per_jiffy/(5000/HZ)) % 100,
+			loops_per_jiffy);
+	}
+
+}
diff --git a/init/do_mounts.c b/init/do_mounts.c
new file mode 100644
index 000000000000..b7570c074d0f
--- /dev/null
+++ b/init/do_mounts.c
@@ -0,0 +1,430 @@
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/ctype.h>
+#include <linux/fd.h>
+#include <linux/tty.h>
+#include <linux/suspend.h>
+#include <linux/root_dev.h>
+#include <linux/security.h>
+#include <linux/delay.h>
+
+#include <linux/nfs_fs.h>
+#include <linux/nfs_fs_sb.h>
+#include <linux/nfs_mount.h>
+
+#include "do_mounts.h"
+
+extern int get_filesystem_list(char * buf);
+
+int __initdata rd_doload;	/* 1 = load RAM disk, 0 = don't load */
+
+int root_mountflags = MS_RDONLY | MS_VERBOSE;
+char * __initdata root_device_name;
+static char __initdata saved_root_name[64];
+
+/* this is initialized in init/main.c */
+dev_t ROOT_DEV;
+
+EXPORT_SYMBOL(ROOT_DEV);
+
+static int __init load_ramdisk(char *str)
+{
+	rd_doload = simple_strtol(str,NULL,0) & 3;
+	return 1;
+}
+__setup("load_ramdisk=", load_ramdisk);
+
+static int __init readonly(char *str)
+{
+	if (*str)
+		return 0;
+	root_mountflags |= MS_RDONLY;
+	return 1;
+}
+
+static int __init readwrite(char *str)
+{
+	if (*str)
+		return 0;
+	root_mountflags &= ~MS_RDONLY;
+	return 1;
+}
+
+__setup("ro", readonly);
+__setup("rw", readwrite);
+
+static dev_t try_name(char *name, int part)
+{
+	char path[64];
+	char buf[32];
+	int range;
+	dev_t res;
+	char *s;
+	int len;
+	int fd;
+	unsigned int maj, min;
+
+	/* read device number from .../dev */
+
+	sprintf(path, "/sys/block/%s/dev", name);
+	fd = sys_open(path, 0, 0);
+	if (fd < 0)
+		goto fail;
+	len = sys_read(fd, buf, 32);
+	sys_close(fd);
+	if (len <= 0 || len == 32 || buf[len - 1] != '\n')
+		goto fail;
+	buf[len - 1] = '\0';
+	if (sscanf(buf, "%u:%u", &maj, &min) == 2) {
+		/*
+		 * Try the %u:%u format -- see print_dev_t()
+		 */
+		res = MKDEV(maj, min);
+		if (maj != MAJOR(res) || min != MINOR(res))
+			goto fail;
+	} else {
+		/*
+		 * Nope.  Try old-style "0321"
+		 */
+		res = new_decode_dev(simple_strtoul(buf, &s, 16));
+		if (*s)
+			goto fail;
+	}
+
+	/* if it's there and we are not looking for a partition - that's it */
+	if (!part)
+		return res;
+
+	/* otherwise read range from .../range */
+	sprintf(path, "/sys/block/%s/range", name);
+	fd = sys_open(path, 0, 0);
+	if (fd < 0)
+		goto fail;
+	len = sys_read(fd, buf, 32);
+	sys_close(fd);
+	if (len <= 0 || len == 32 || buf[len - 1] != '\n')
+		goto fail;
+	buf[len - 1] = '\0';
+	range = simple_strtoul(buf, &s, 10);
+	if (*s)
+		goto fail;
+
+	/* if partition is within range - we got it */
+	if (part < range)
+		return res + part;
+fail:
+	return 0;
+}
+
+/*
+ *	Convert a name into device number.  We accept the following variants:
+ *
+ *	1) device number in hexadecimal	represents itself
+ *	2) /dev/nfs represents Root_NFS (0xff)
+ *	3) /dev/<disk_name> represents the device number of disk
+ *	4) /dev/<disk_name><decimal> represents the device number
+ *         of partition - device number of disk plus the partition number
+ *	5) /dev/<disk_name>p<decimal> - same as the above, that form is
+ *	   used when disk name of partitioned disk ends on a digit.
+ *
+ *	If name doesn't have fall into the categories above, we return 0.
+ *	Driverfs is used to check if something is a disk name - it has
+ *	all known disks under bus/block/devices.  If the disk name
+ *	contains slashes, name of driverfs node has them replaced with
+ *	bangs.  try_name() does the actual checks, assuming that driverfs
+ *	is mounted on rootfs /sys.
+ */
+
+dev_t name_to_dev_t(char *name)
+{
+	char s[32];
+	char *p;
+	dev_t res = 0;
+	int part;
+
+#ifdef CONFIG_SYSFS
+	int mkdir_err = sys_mkdir("/sys", 0700);
+	if (sys_mount("sysfs", "/sys", "sysfs", 0, NULL) < 0)
+		goto out;
+#endif
+
+	if (strncmp(name, "/dev/", 5) != 0) {
+		unsigned maj, min;
+
+		if (sscanf(name, "%u:%u", &maj, &min) == 2) {
+			res = MKDEV(maj, min);
+			if (maj != MAJOR(res) || min != MINOR(res))
+				goto fail;
+		} else {
+			res = new_decode_dev(simple_strtoul(name, &p, 16));
+			if (*p)
+				goto fail;
+		}
+		goto done;
+	}
+	name += 5;
+	res = Root_NFS;
+	if (strcmp(name, "nfs") == 0)
+		goto done;
+	res = Root_RAM0;
+	if (strcmp(name, "ram") == 0)
+		goto done;
+
+	if (strlen(name) > 31)
+		goto fail;
+	strcpy(s, name);
+	for (p = s; *p; p++)
+		if (*p == '/')
+			*p = '!';
+	res = try_name(s, 0);
+	if (res)
+		goto done;
+
+	while (p > s && isdigit(p[-1]))
+		p--;
+	if (p == s || !*p || *p == '0')
+		goto fail;
+	part = simple_strtoul(p, NULL, 10);
+	*p = '\0';
+	res = try_name(s, part);
+	if (res)
+		goto done;
+
+	if (p < s + 2 || !isdigit(p[-2]) || p[-1] != 'p')
+		goto fail;
+	p[-1] = '\0';
+	res = try_name(s, part);
+done:
+#ifdef CONFIG_SYSFS
+	sys_umount("/sys", 0);
+out:
+	if (!mkdir_err)
+		sys_rmdir("/sys");
+#endif
+	return res;
+fail:
+	res = 0;
+	goto done;
+}
+
+static int __init root_dev_setup(char *line)
+{
+	strlcpy(saved_root_name, line, sizeof(saved_root_name));
+	return 1;
+}
+
+__setup("root=", root_dev_setup);
+
+static char * __initdata root_mount_data;
+static int __init root_data_setup(char *str)
+{
+	root_mount_data = str;
+	return 1;
+}
+
+static char * __initdata root_fs_names;
+static int __init fs_names_setup(char *str)
+{
+	root_fs_names = str;
+	return 1;
+}
+
+static unsigned int __initdata root_delay;
+static int __init root_delay_setup(char *str)
+{
+	root_delay = simple_strtoul(str, NULL, 0);
+	return 1;
+}
+
+__setup("rootflags=", root_data_setup);
+__setup("rootfstype=", fs_names_setup);
+__setup("rootdelay=", root_delay_setup);
+
+static void __init get_fs_names(char *page)
+{
+	char *s = page;
+
+	if (root_fs_names) {
+		strcpy(page, root_fs_names);
+		while (*s++) {
+			if (s[-1] == ',')
+				s[-1] = '\0';
+		}
+	} else {
+		int len = get_filesystem_list(page);
+		char *p, *next;
+
+		page[len] = '\0';
+		for (p = page-1; p; p = next) {
+			next = strchr(++p, '\n');
+			if (*p++ != '\t')
+				continue;
+			while ((*s++ = *p++) != '\n')
+				;
+			s[-1] = '\0';
+		}
+	}
+	*s = '\0';
+}
+
+static int __init do_mount_root(char *name, char *fs, int flags, void *data)
+{
+	int err = sys_mount(name, "/root", fs, flags, data);
+	if (err)
+		return err;
+
+	sys_chdir("/root");
+	ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev;
+	printk("VFS: Mounted root (%s filesystem)%s.\n",
+	       current->fs->pwdmnt->mnt_sb->s_type->name,
+	       current->fs->pwdmnt->mnt_sb->s_flags & MS_RDONLY ? 
+	       " readonly" : "");
+	return 0;
+}
+
+void __init mount_block_root(char *name, int flags)
+{
+	char *fs_names = __getname();
+	char *p;
+	char b[BDEVNAME_SIZE];
+
+	get_fs_names(fs_names);
+retry:
+	for (p = fs_names; *p; p += strlen(p)+1) {
+		int err = do_mount_root(name, p, flags, root_mount_data);
+		switch (err) {
+			case 0:
+				goto out;
+			case -EACCES:
+				flags |= MS_RDONLY;
+				goto retry;
+			case -EINVAL:
+				continue;
+		}
+	        /*
+		 * Allow the user to distinguish between failed sys_open
+		 * and bad superblock on root device.
+		 */
+		__bdevname(ROOT_DEV, b);
+		printk("VFS: Cannot open root device \"%s\" or %s\n",
+				root_device_name, b);
+		printk("Please append a correct \"root=\" boot option\n");
+
+		panic("VFS: Unable to mount root fs on %s", b);
+	}
+	panic("VFS: Unable to mount root fs on %s", __bdevname(ROOT_DEV, b));
+out:
+	putname(fs_names);
+}
+ 
+#ifdef CONFIG_ROOT_NFS
+static int __init mount_nfs_root(void)
+{
+	void *data = nfs_root_data();
+
+	create_dev("/dev/root", ROOT_DEV, NULL);
+	if (data &&
+	    do_mount_root("/dev/root", "nfs", root_mountflags, data) == 0)
+		return 1;
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_BLK_DEV_RAM) || defined(CONFIG_BLK_DEV_FD)
+void __init change_floppy(char *fmt, ...)
+{
+	struct termios termios;
+	char buf[80];
+	char c;
+	int fd;
+	va_list args;
+	va_start(args, fmt);
+	vsprintf(buf, fmt, args);
+	va_end(args);
+	fd = sys_open("/dev/root", O_RDWR | O_NDELAY, 0);
+	if (fd >= 0) {
+		sys_ioctl(fd, FDEJECT, 0);
+		sys_close(fd);
+	}
+	printk(KERN_NOTICE "VFS: Insert %s and press ENTER\n", buf);
+	fd = sys_open("/dev/console", O_RDWR, 0);
+	if (fd >= 0) {
+		sys_ioctl(fd, TCGETS, (long)&termios);
+		termios.c_lflag &= ~ICANON;
+		sys_ioctl(fd, TCSETSF, (long)&termios);
+		sys_read(fd, &c, 1);
+		termios.c_lflag |= ICANON;
+		sys_ioctl(fd, TCSETSF, (long)&termios);
+		sys_close(fd);
+	}
+}
+#endif
+
+void __init mount_root(void)
+{
+#ifdef CONFIG_ROOT_NFS
+	if (MAJOR(ROOT_DEV) == UNNAMED_MAJOR) {
+		if (mount_nfs_root())
+			return;
+
+		printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
+		ROOT_DEV = Root_FD0;
+	}
+#endif
+#ifdef CONFIG_BLK_DEV_FD
+	if (MAJOR(ROOT_DEV) == FLOPPY_MAJOR) {
+		/* rd_doload is 2 for a dual initrd/ramload setup */
+		if (rd_doload==2) {
+			if (rd_load_disk(1)) {
+				ROOT_DEV = Root_RAM1;
+				root_device_name = NULL;
+			}
+		} else
+			change_floppy("root floppy");
+	}
+#endif
+	create_dev("/dev/root", ROOT_DEV, root_device_name);
+	mount_block_root("/dev/root", root_mountflags);
+}
+
+/*
+ * Prepare the namespace - decide what/where to mount, load ramdisks, etc.
+ */
+void __init prepare_namespace(void)
+{
+	int is_floppy;
+
+	mount_devfs();
+
+	if (root_delay) {
+		printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
+		       root_delay);
+		ssleep(root_delay);
+	}
+
+	md_run_setup();
+
+	if (saved_root_name[0]) {
+		root_device_name = saved_root_name;
+		ROOT_DEV = name_to_dev_t(root_device_name);
+		if (strncmp(root_device_name, "/dev/", 5) == 0)
+			root_device_name += 5;
+	}
+
+	is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
+
+	if (initrd_load())
+		goto out;
+
+	if (is_floppy && rd_doload && rd_load_disk(0))
+		ROOT_DEV = Root_RAM0;
+
+	mount_root();
+out:
+	umount_devfs("/dev");
+	sys_mount(".", "/", NULL, MS_MOVE, NULL);
+	sys_chroot(".");
+	security_sb_post_mountroot();
+	mount_devfs_fs ();
+}
+
diff --git a/init/do_mounts.h b/init/do_mounts.h
new file mode 100644
index 000000000000..de92bee4f35e
--- /dev/null
+++ b/init/do_mounts.h
@@ -0,0 +1,92 @@
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/devfs_fs_kernel.h>
+#include <linux/init.h>
+#include <linux/syscalls.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/mount.h>
+#include <linux/major.h>
+#include <linux/root_dev.h>
+
+dev_t name_to_dev_t(char *name);
+void  change_floppy(char *fmt, ...);
+void  mount_block_root(char *name, int flags);
+void  mount_root(void);
+extern int root_mountflags;
+extern char *root_device_name;
+
+#ifdef CONFIG_DEVFS_FS
+
+void mount_devfs(void);
+void umount_devfs(char *path);
+int  create_dev(char *name, dev_t dev, char *devfs_name);
+
+#else
+
+static inline void mount_devfs(void) {}
+static inline void umount_devfs(const char *path) {}
+
+static inline int create_dev(char *name, dev_t dev, char *devfs_name)
+{
+	sys_unlink(name);
+	return sys_mknod(name, S_IFBLK|0600, new_encode_dev(dev));
+}
+
+#endif
+
+#if BITS_PER_LONG == 32
+static inline u32 bstat(char *name)
+{
+	struct stat64 stat;
+	if (sys_stat64(name, &stat) != 0)
+		return 0;
+	if (!S_ISBLK(stat.st_mode))
+		return 0;
+	if (stat.st_rdev != (u32)stat.st_rdev)
+		return 0;
+	return stat.st_rdev;
+}
+#else
+static inline u32 bstat(char *name)
+{
+	struct stat stat;
+	if (sys_newstat(name, &stat) != 0)
+		return 0;
+	if (!S_ISBLK(stat.st_mode))
+		return 0;
+	return stat.st_rdev;
+}
+#endif
+
+#ifdef CONFIG_BLK_DEV_RAM
+
+int __init rd_load_disk(int n);
+int __init rd_load_image(char *from);
+
+#else
+
+static inline int rd_load_disk(int n) { return 0; }
+static inline int rd_load_image(char *from) { return 0; }
+
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+
+int __init initrd_load(void);
+
+#else
+
+static inline int initrd_load(void) { return 0; }
+
+#endif
+
+#ifdef CONFIG_BLK_DEV_MD
+
+void md_run_setup(void);
+
+#else
+
+static inline void md_run_setup(void) {}
+
+#endif
diff --git a/init/do_mounts_devfs.c b/init/do_mounts_devfs.c
new file mode 100644
index 000000000000..cc526474690a
--- /dev/null
+++ b/init/do_mounts_devfs.c
@@ -0,0 +1,137 @@
+
+#include <linux/kernel.h>
+#include <linux/dirent.h>
+#include <linux/string.h>
+
+#include "do_mounts.h"
+
+void __init mount_devfs(void)
+{
+	sys_mount("devfs", "/dev", "devfs", 0, NULL);
+}
+
+void __init umount_devfs(char *path)
+{
+	sys_umount(path, 0);
+}
+
+/*
+ * If the dir will fit in *buf, return its length.  If it won't fit, return
+ * zero.  Return -ve on error.
+ */
+static int __init do_read_dir(int fd, void *buf, int len)
+{
+	long bytes, n;
+	char *p = buf;
+	sys_lseek(fd, 0, 0);
+
+	for (bytes = 0; bytes < len; bytes += n) {
+		n = sys_getdents64(fd, (struct linux_dirent64 *)(p + bytes),
+					len - bytes);
+		if (n < 0)
+			return n;
+		if (n == 0)
+			return bytes;
+	}
+	return 0;
+}
+
+/*
+ * Try to read all of a directory.  Returns the contents at *p, which
+ * is kmalloced memory.  Returns the number of bytes read at *len.  Returns
+ * NULL on error.
+ */
+static void * __init read_dir(char *path, int *len)
+{
+	int size;
+	int fd = sys_open(path, 0, 0);
+
+	*len = 0;
+	if (fd < 0)
+		return NULL;
+
+	for (size = 1 << 9; size <= (PAGE_SIZE << MAX_ORDER); size <<= 1) {
+		void *p = kmalloc(size, GFP_KERNEL);
+		int n;
+		if (!p)
+			break;
+		n = do_read_dir(fd, p, size);
+		if (n > 0) {
+			sys_close(fd);
+			*len = n;
+			return p;
+		}
+		kfree(p);
+		if (n == -EINVAL)
+			continue;	/* Try a larger buffer */
+		if (n < 0)
+			break;
+	}
+	sys_close(fd);
+	return NULL;
+}
+
+/*
+ * recursively scan <path>, looking for a device node of type <dev>
+ */
+static int __init find_in_devfs(char *path, unsigned dev)
+{
+	char *end = path + strlen(path);
+	int rest = path + 64 - end;
+	int size;
+	char *p = read_dir(path, &size);
+	char *s;
+
+	if (!p)
+		return -1;
+	for (s = p; s < p + size; s += ((struct linux_dirent64 *)s)->d_reclen) {
+		struct linux_dirent64 *d = (struct linux_dirent64 *)s;
+		if (strlen(d->d_name) + 2 > rest)
+			continue;
+		switch (d->d_type) {
+			case DT_BLK:
+				sprintf(end, "/%s", d->d_name);
+				if (bstat(path) != dev)
+					break;
+				kfree(p);
+				return 0;
+			case DT_DIR:
+				if (strcmp(d->d_name, ".") == 0)
+					break;
+				if (strcmp(d->d_name, "..") == 0)
+					break;
+				sprintf(end, "/%s", d->d_name);
+				if (find_in_devfs(path, dev) < 0)
+					break;
+				kfree(p);
+				return 0;
+		}
+	}
+	kfree(p);
+	return -1;
+}
+
+/*
+ * create a device node called <name> which points to
+ * <devfs_name> if possible, otherwise find a device node
+ * which matches <dev> and make <name> a symlink pointing to it.
+ */
+int __init create_dev(char *name, dev_t dev, char *devfs_name)
+{
+	char path[64];
+
+	sys_unlink(name);
+	if (devfs_name && devfs_name[0]) {
+		if (strncmp(devfs_name, "/dev/", 5) == 0)
+			devfs_name += 5;
+		sprintf(path, "/dev/%s", devfs_name);
+		if (sys_access(path, 0) == 0)
+			return sys_symlink(devfs_name, name);
+	}
+	if (!dev)
+		return -1;
+	strcpy(path, "/dev");
+	if (find_in_devfs(path, new_encode_dev(dev)) < 0)
+		return -1;
+	return sys_symlink(path + 5, name);
+}
diff --git a/init/do_mounts_initrd.c b/init/do_mounts_initrd.c
new file mode 100644
index 000000000000..07e7d31f2d0b
--- /dev/null
+++ b/init/do_mounts_initrd.c
@@ -0,0 +1,121 @@
+#define __KERNEL_SYSCALLS__
+#include <linux/unistd.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/minix_fs.h>
+#include <linux/ext2_fs.h>
+#include <linux/romfs_fs.h>
+#include <linux/initrd.h>
+#include <linux/sched.h>
+
+#include "do_mounts.h"
+
+unsigned long initrd_start, initrd_end;
+int initrd_below_start_ok;
+unsigned int real_root_dev;	/* do_proc_dointvec cannot handle kdev_t */
+static int __initdata old_fd, root_fd;
+static int __initdata mount_initrd = 1;
+
+static int __init no_initrd(char *str)
+{
+	mount_initrd = 0;
+	return 1;
+}
+
+__setup("noinitrd", no_initrd);
+
+static int __init do_linuxrc(void * shell)
+{
+	static char *argv[] = { "linuxrc", NULL, };
+	extern char * envp_init[];
+
+	sys_close(old_fd);sys_close(root_fd);
+	sys_close(0);sys_close(1);sys_close(2);
+	sys_setsid();
+	(void) sys_open("/dev/console",O_RDWR,0);
+	(void) sys_dup(0);
+	(void) sys_dup(0);
+	return execve(shell, argv, envp_init);
+}
+
+static void __init handle_initrd(void)
+{
+	int error;
+	int i, pid;
+
+	real_root_dev = new_encode_dev(ROOT_DEV);
+	create_dev("/dev/root.old", Root_RAM0, NULL);
+	/* mount initrd on rootfs' /root */
+	mount_block_root("/dev/root.old", root_mountflags & ~MS_RDONLY);
+	sys_mkdir("/old", 0700);
+	root_fd = sys_open("/", 0, 0);
+	old_fd = sys_open("/old", 0, 0);
+	/* move initrd over / and chdir/chroot in initrd root */
+	sys_chdir("/root");
+	sys_mount(".", "/", NULL, MS_MOVE, NULL);
+	sys_chroot(".");
+	mount_devfs_fs ();
+
+	pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD);
+	if (pid > 0) {
+		while (pid != sys_wait4(-1, &i, 0, NULL))
+			yield();
+	}
+
+	/* move initrd to rootfs' /old */
+	sys_fchdir(old_fd);
+	sys_mount("/", ".", NULL, MS_MOVE, NULL);
+	/* switch root and cwd back to / of rootfs */
+	sys_fchdir(root_fd);
+	sys_chroot(".");
+	sys_close(old_fd);
+	sys_close(root_fd);
+	umount_devfs("/old/dev");
+
+	if (new_decode_dev(real_root_dev) == Root_RAM0) {
+		sys_chdir("/old");
+		return;
+	}
+
+	ROOT_DEV = new_decode_dev(real_root_dev);
+	mount_root();
+
+	printk(KERN_NOTICE "Trying to move old root to /initrd ... ");
+	error = sys_mount("/old", "/root/initrd", NULL, MS_MOVE, NULL);
+	if (!error)
+		printk("okay\n");
+	else {
+		int fd = sys_open("/dev/root.old", O_RDWR, 0);
+		printk("failed\n");
+		printk(KERN_NOTICE "Unmounting old root\n");
+		sys_umount("/old", MNT_DETACH);
+		printk(KERN_NOTICE "Trying to free ramdisk memory ... ");
+		if (fd < 0) {
+			error = fd;
+		} else {
+			error = sys_ioctl(fd, BLKFLSBUF, 0);
+			sys_close(fd);
+		}
+		printk(!error ? "okay\n" : "failed\n");
+	}
+}
+
+int __init initrd_load(void)
+{
+	if (mount_initrd) {
+		create_dev("/dev/ram", Root_RAM0, NULL);
+		/*
+		 * Load the initrd data into /dev/ram0. Execute it as initrd
+		 * unless /dev/ram0 is supposed to be our actual root device,
+		 * in that case the ram disk is just set up here, and gets
+		 * mounted in the normal path.
+		 */
+		if (rd_load_image("/initrd.image") && ROOT_DEV != Root_RAM0) {
+			sys_unlink("/initrd.image");
+			handle_initrd();
+			return 1;
+		}
+	}
+	sys_unlink("/initrd.image");
+	return 0;
+}
diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c
new file mode 100644
index 000000000000..3fbc3555ce96
--- /dev/null
+++ b/init/do_mounts_md.c
@@ -0,0 +1,290 @@
+
+#include <linux/raid/md.h>
+
+#include "do_mounts.h"
+
+/*
+ * When md (and any require personalities) are compiled into the kernel
+ * (not a module), arrays can be assembles are boot time using with AUTODETECT
+ * where specially marked partitions are registered with md_autodetect_dev(),
+ * and with MD_BOOT where devices to be collected are given on the boot line
+ * with md=.....
+ * The code for that is here.
+ */
+
+static int __initdata raid_noautodetect, raid_autopart;
+
+static struct {
+	int minor;
+	int partitioned;
+	int pers;
+	int chunk;
+	char *device_names;
+} md_setup_args[MAX_MD_DEVS] __initdata;
+
+static int md_setup_ents __initdata;
+
+extern int mdp_major;
+/*
+ * Parse the command-line parameters given our kernel, but do not
+ * actually try to invoke the MD device now; that is handled by
+ * md_setup_drive after the low-level disk drivers have initialised.
+ *
+ * 27/11/1999: Fixed to work correctly with the 2.3 kernel (which
+ *             assigns the task of parsing integer arguments to the
+ *             invoked program now).  Added ability to initialise all
+ *             the MD devices (by specifying multiple "md=" lines)
+ *             instead of just one.  -- KTK
+ * 18May2000: Added support for persistent-superblock arrays:
+ *             md=n,0,factor,fault,device-list   uses RAID0 for device n
+ *             md=n,-1,factor,fault,device-list  uses LINEAR for device n
+ *             md=n,device-list      reads a RAID superblock from the devices
+ *             elements in device-list are read by name_to_kdev_t so can be
+ *             a hex number or something like /dev/hda1 /dev/sdb
+ * 2001-06-03: Dave Cinege <dcinege@psychosis.com>
+ *		Shifted name_to_kdev_t() and related operations to md_set_drive()
+ *		for later execution. Rewrote section to make devfs compatible.
+ */
+static int __init md_setup(char *str)
+{
+	int minor, level, factor, fault, pers, partitioned = 0;
+	char *pername = "";
+	char *str1;
+	int ent;
+
+	if (*str == 'd') {
+		partitioned = 1;
+		str++;
+	}
+	if (get_option(&str, &minor) != 2) {	/* MD Number */
+		printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
+		return 0;
+	}
+	str1 = str;
+	if (minor >= MAX_MD_DEVS) {
+		printk(KERN_WARNING "md: md=%d, Minor device number too high.\n", minor);
+		return 0;
+	}
+	for (ent=0 ; ent< md_setup_ents ; ent++)
+		if (md_setup_args[ent].minor == minor &&
+		    md_setup_args[ent].partitioned == partitioned) {
+			printk(KERN_WARNING "md: md=%s%d, Specified more than once. "
+			       "Replacing previous definition.\n", partitioned?"d":"", minor);
+			break;
+		}
+	if (ent >= MAX_MD_DEVS) {
+		printk(KERN_WARNING "md: md=%s%d - too many md initialisations\n", partitioned?"d":"", minor);
+		return 0;
+	}
+	if (ent >= md_setup_ents)
+		md_setup_ents++;
+	switch (get_option(&str, &level)) {	/* RAID Personality */
+	case 2: /* could be 0 or -1.. */
+		if (level == 0 || level == LEVEL_LINEAR) {
+			if (get_option(&str, &factor) != 2 ||	/* Chunk Size */
+					get_option(&str, &fault) != 2) {
+				printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
+				return 0;
+			}
+			md_setup_args[ent].pers = level;
+			md_setup_args[ent].chunk = 1 << (factor+12);
+			if (level ==  LEVEL_LINEAR) {
+				pers = LINEAR;
+				pername = "linear";
+			} else {
+				pers = RAID0;
+				pername = "raid0";
+			}
+			md_setup_args[ent].pers = pers;
+			break;
+		}
+		/* FALL THROUGH */
+	case 1: /* the first device is numeric */
+		str = str1;
+		/* FALL THROUGH */
+	case 0:
+		md_setup_args[ent].pers = 0;
+		pername="super-block";
+	}
+
+	printk(KERN_INFO "md: Will configure md%d (%s) from %s, below.\n",
+		minor, pername, str);
+	md_setup_args[ent].device_names = str;
+	md_setup_args[ent].partitioned = partitioned;
+	md_setup_args[ent].minor = minor;
+
+	return 1;
+}
+
+#define MdpMinorShift 6
+
+static void __init md_setup_drive(void)
+{
+	int minor, i, ent, partitioned;
+	dev_t dev;
+	dev_t devices[MD_SB_DISKS+1];
+
+	for (ent = 0; ent < md_setup_ents ; ent++) {
+		int fd;
+		int err = 0;
+		char *devname;
+		mdu_disk_info_t dinfo;
+		char name[16], devfs_name[16];
+
+		minor = md_setup_args[ent].minor;
+		partitioned = md_setup_args[ent].partitioned;
+		devname = md_setup_args[ent].device_names;
+
+		sprintf(name, "/dev/md%s%d", partitioned?"_d":"", minor);
+		sprintf(devfs_name, "/dev/md/%s%d", partitioned?"d":"", minor);
+		if (partitioned)
+			dev = MKDEV(mdp_major, minor << MdpMinorShift);
+		else
+			dev = MKDEV(MD_MAJOR, minor);
+		create_dev(name, dev, devfs_name);
+		for (i = 0; i < MD_SB_DISKS && devname != 0; i++) {
+			char *p;
+			char comp_name[64];
+			u32 rdev;
+
+			p = strchr(devname, ',');
+			if (p)
+				*p++ = 0;
+
+			dev = name_to_dev_t(devname);
+			if (strncmp(devname, "/dev/", 5) == 0)
+				devname += 5;
+			snprintf(comp_name, 63, "/dev/%s", devname);
+			rdev = bstat(comp_name);
+			if (rdev)
+				dev = new_decode_dev(rdev);
+			if (!dev) {
+				printk(KERN_WARNING "md: Unknown device name: %s\n", devname);
+				break;
+			}
+
+			devices[i] = dev;
+
+			devname = p;
+		}
+		devices[i] = 0;
+
+		if (!i)
+			continue;
+
+		printk(KERN_INFO "md: Loading md%s%d: %s\n",
+			partitioned ? "_d" : "", minor,
+			md_setup_args[ent].device_names);
+
+		fd = sys_open(name, 0, 0);
+		if (fd < 0) {
+			printk(KERN_ERR "md: open failed - cannot start "
+					"array %s\n", name);
+			continue;
+		}
+		if (sys_ioctl(fd, SET_ARRAY_INFO, 0) == -EBUSY) {
+			printk(KERN_WARNING
+			       "md: Ignoring md=%d, already autodetected. (Use raid=noautodetect)\n",
+			       minor);
+			sys_close(fd);
+			continue;
+		}
+
+		if (md_setup_args[ent].pers) {
+			/* non-persistent */
+			mdu_array_info_t ainfo;
+			ainfo.level = pers_to_level(md_setup_args[ent].pers);
+			ainfo.size = 0;
+			ainfo.nr_disks =0;
+			ainfo.raid_disks =0;
+			while (devices[ainfo.raid_disks])
+				ainfo.raid_disks++;
+			ainfo.md_minor =minor;
+			ainfo.not_persistent = 1;
+
+			ainfo.state = (1 << MD_SB_CLEAN);
+			ainfo.layout = 0;
+			ainfo.chunk_size = md_setup_args[ent].chunk;
+			err = sys_ioctl(fd, SET_ARRAY_INFO, (long)&ainfo);
+			for (i = 0; !err && i <= MD_SB_DISKS; i++) {
+				dev = devices[i];
+				if (!dev)
+					break;
+				dinfo.number = i;
+				dinfo.raid_disk = i;
+				dinfo.state = (1<<MD_DISK_ACTIVE)|(1<<MD_DISK_SYNC);
+				dinfo.major = MAJOR(dev);
+				dinfo.minor = MINOR(dev);
+				err = sys_ioctl(fd, ADD_NEW_DISK, (long)&dinfo);
+			}
+		} else {
+			/* persistent */
+			for (i = 0; i <= MD_SB_DISKS; i++) {
+				dev = devices[i];
+				if (!dev)
+					break;
+				dinfo.major = MAJOR(dev);
+				dinfo.minor = MINOR(dev);
+				sys_ioctl(fd, ADD_NEW_DISK, (long)&dinfo);
+			}
+		}
+		if (!err)
+			err = sys_ioctl(fd, RUN_ARRAY, 0);
+		if (err)
+			printk(KERN_WARNING "md: starting md%d failed\n", minor);
+		else {
+			/* reread the partition table.
+			 * I (neilb) and not sure why this is needed, but I cannot
+			 * boot a kernel with devfs compiled in from partitioned md
+			 * array without it
+			 */
+			sys_close(fd);
+			fd = sys_open(name, 0, 0);
+			sys_ioctl(fd, BLKRRPART, 0);
+		}
+		sys_close(fd);
+	}
+}
+
+static int __init raid_setup(char *str)
+{
+	int len, pos;
+
+	len = strlen(str) + 1;
+	pos = 0;
+
+	while (pos < len) {
+		char *comma = strchr(str+pos, ',');
+		int wlen;
+		if (comma)
+			wlen = (comma-str)-pos;
+		else	wlen = (len-1)-pos;
+
+		if (!strncmp(str, "noautodetect", wlen))
+			raid_noautodetect = 1;
+		if (strncmp(str, "partitionable", wlen)==0)
+			raid_autopart = 1;
+		if (strncmp(str, "part", wlen)==0)
+			raid_autopart = 1;
+		pos += wlen+1;
+	}
+	return 1;
+}
+
+__setup("raid=", raid_setup);
+__setup("md=", md_setup);
+
+void __init md_run_setup(void)
+{
+	create_dev("/dev/md0", MKDEV(MD_MAJOR, 0), "md/0");
+	if (raid_noautodetect)
+		printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=noautodetect)\n");
+	else {
+		int fd = sys_open("/dev/md0", 0, 0);
+		if (fd >= 0) {
+			sys_ioctl(fd, RAID_AUTORUN, raid_autopart);
+			sys_close(fd);
+		}
+	}
+	md_setup_drive();
+}
diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c
new file mode 100644
index 000000000000..c10b08a80982
--- /dev/null
+++ b/init/do_mounts_rd.c
@@ -0,0 +1,429 @@
+
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/minix_fs.h>
+#include <linux/ext2_fs.h>
+#include <linux/romfs_fs.h>
+#include <linux/cramfs_fs.h>
+#include <linux/initrd.h>
+#include <linux/string.h>
+
+#include "do_mounts.h"
+
+#define BUILD_CRAMDISK
+
+int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */
+
+static int __init prompt_ramdisk(char *str)
+{
+	rd_prompt = simple_strtol(str,NULL,0) & 1;
+	return 1;
+}
+__setup("prompt_ramdisk=", prompt_ramdisk);
+
+int __initdata rd_image_start;		/* starting block # of image */
+
+static int __init ramdisk_start_setup(char *str)
+{
+	rd_image_start = simple_strtol(str,NULL,0);
+	return 1;
+}
+__setup("ramdisk_start=", ramdisk_start_setup);
+
+static int __init crd_load(int in_fd, int out_fd);
+
+/*
+ * This routine tries to find a RAM disk image to load, and returns the
+ * number of blocks to read for a non-compressed image, 0 if the image
+ * is a compressed image, and -1 if an image with the right magic
+ * numbers could not be found.
+ *
+ * We currently check for the following magic numbers:
+ * 	minix
+ * 	ext2
+ *	romfs
+ *	cramfs
+ * 	gzip
+ */
+static int __init 
+identify_ramdisk_image(int fd, int start_block)
+{
+	const int size = 512;
+	struct minix_super_block *minixsb;
+	struct ext2_super_block *ext2sb;
+	struct romfs_super_block *romfsb;
+	struct cramfs_super *cramfsb;
+	int nblocks = -1;
+	unsigned char *buf;
+
+	buf = kmalloc(size, GFP_KERNEL);
+	if (buf == 0)
+		return -1;
+
+	minixsb = (struct minix_super_block *) buf;
+	ext2sb = (struct ext2_super_block *) buf;
+	romfsb = (struct romfs_super_block *) buf;
+	cramfsb = (struct cramfs_super *) buf;
+	memset(buf, 0xe5, size);
+
+	/*
+	 * Read block 0 to test for gzipped kernel
+	 */
+	sys_lseek(fd, start_block * BLOCK_SIZE, 0);
+	sys_read(fd, buf, size);
+
+	/*
+	 * If it matches the gzip magic numbers, return -1
+	 */
+	if (buf[0] == 037 && ((buf[1] == 0213) || (buf[1] == 0236))) {
+		printk(KERN_NOTICE
+		       "RAMDISK: Compressed image found at block %d\n",
+		       start_block);
+		nblocks = 0;
+		goto done;
+	}
+
+	/* romfs is at block zero too */
+	if (romfsb->word0 == ROMSB_WORD0 &&
+	    romfsb->word1 == ROMSB_WORD1) {
+		printk(KERN_NOTICE
+		       "RAMDISK: romfs filesystem found at block %d\n",
+		       start_block);
+		nblocks = (ntohl(romfsb->size)+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS;
+		goto done;
+	}
+
+	if (cramfsb->magic == CRAMFS_MAGIC) {
+		printk(KERN_NOTICE
+		       "RAMDISK: cramfs filesystem found at block %d\n",
+		       start_block);
+		nblocks = (cramfsb->size + BLOCK_SIZE - 1) >> BLOCK_SIZE_BITS;
+		goto done;
+	}
+
+	/*
+	 * Read block 1 to test for minix and ext2 superblock
+	 */
+	sys_lseek(fd, (start_block+1) * BLOCK_SIZE, 0);
+	sys_read(fd, buf, size);
+
+	/* Try minix */
+	if (minixsb->s_magic == MINIX_SUPER_MAGIC ||
+	    minixsb->s_magic == MINIX_SUPER_MAGIC2) {
+		printk(KERN_NOTICE
+		       "RAMDISK: Minix filesystem found at block %d\n",
+		       start_block);
+		nblocks = minixsb->s_nzones << minixsb->s_log_zone_size;
+		goto done;
+	}
+
+	/* Try ext2 */
+	if (ext2sb->s_magic == cpu_to_le16(EXT2_SUPER_MAGIC)) {
+		printk(KERN_NOTICE
+		       "RAMDISK: ext2 filesystem found at block %d\n",
+		       start_block);
+		nblocks = le32_to_cpu(ext2sb->s_blocks_count) <<
+			le32_to_cpu(ext2sb->s_log_block_size);
+		goto done;
+	}
+
+	printk(KERN_NOTICE
+	       "RAMDISK: Couldn't find valid RAM disk image starting at %d.\n",
+	       start_block);
+	
+done:
+	sys_lseek(fd, start_block * BLOCK_SIZE, 0);
+	kfree(buf);
+	return nblocks;
+}
+
+int __init rd_load_image(char *from)
+{
+	int res = 0;
+	int in_fd, out_fd;
+	unsigned long rd_blocks, devblocks;
+	int nblocks, i, disk;
+	char *buf = NULL;
+	unsigned short rotate = 0;
+#if !defined(CONFIG_ARCH_S390) && !defined(CONFIG_PPC_ISERIES)
+	char rotator[4] = { '|' , '/' , '-' , '\\' };
+#endif
+
+	out_fd = sys_open("/dev/ram", O_RDWR, 0);
+	if (out_fd < 0)
+		goto out;
+
+	in_fd = sys_open(from, O_RDONLY, 0);
+	if (in_fd < 0)
+		goto noclose_input;
+
+	nblocks = identify_ramdisk_image(in_fd, rd_image_start);
+	if (nblocks < 0)
+		goto done;
+
+	if (nblocks == 0) {
+#ifdef BUILD_CRAMDISK
+		if (crd_load(in_fd, out_fd) == 0)
+			goto successful_load;
+#else
+		printk(KERN_NOTICE
+		       "RAMDISK: Kernel does not support compressed "
+		       "RAM disk images\n");
+#endif
+		goto done;
+	}
+
+	/*
+	 * NOTE NOTE: nblocks is not actually blocks but
+	 * the number of kibibytes of data to load into a ramdisk.
+	 * So any ramdisk block size that is a multiple of 1KiB should
+	 * work when the appropriate ramdisk_blocksize is specified
+	 * on the command line.
+	 *
+	 * The default ramdisk_blocksize is 1KiB and it is generally
+	 * silly to use anything else, so make sure to use 1KiB
+	 * blocksize while generating ext2fs ramdisk-images.
+	 */
+	if (sys_ioctl(out_fd, BLKGETSIZE, (unsigned long)&rd_blocks) < 0)
+		rd_blocks = 0;
+	else
+		rd_blocks >>= 1;
+
+	if (nblocks > rd_blocks) {
+		printk("RAMDISK: image too big! (%dKiB/%ldKiB)\n",
+		       nblocks, rd_blocks);
+		goto done;
+	}
+		
+	/*
+	 * OK, time to copy in the data
+	 */
+	if (sys_ioctl(in_fd, BLKGETSIZE, (unsigned long)&devblocks) < 0)
+		devblocks = 0;
+	else
+		devblocks >>= 1;
+
+	if (strcmp(from, "/initrd.image") == 0)
+		devblocks = nblocks;
+
+	if (devblocks == 0) {
+		printk(KERN_ERR "RAMDISK: could not determine device size\n");
+		goto done;
+	}
+
+	buf = kmalloc(BLOCK_SIZE, GFP_KERNEL);
+	if (buf == 0) {
+		printk(KERN_ERR "RAMDISK: could not allocate buffer\n");
+		goto done;
+	}
+
+	printk(KERN_NOTICE "RAMDISK: Loading %dKiB [%ld disk%s] into ram disk... ",
+		nblocks, ((nblocks-1)/devblocks)+1, nblocks>devblocks ? "s" : "");
+	for (i = 0, disk = 1; i < nblocks; i++) {
+		if (i && (i % devblocks == 0)) {
+			printk("done disk #%d.\n", disk++);
+			rotate = 0;
+			if (sys_close(in_fd)) {
+				printk("Error closing the disk.\n");
+				goto noclose_input;
+			}
+			change_floppy("disk #%d", disk);
+			in_fd = sys_open(from, O_RDONLY, 0);
+			if (in_fd < 0)  {
+				printk("Error opening disk.\n");
+				goto noclose_input;
+			}
+			printk("Loading disk #%d... ", disk);
+		}
+		sys_read(in_fd, buf, BLOCK_SIZE);
+		sys_write(out_fd, buf, BLOCK_SIZE);
+#if !defined(CONFIG_ARCH_S390) && !defined(CONFIG_PPC_ISERIES)
+		if (!(i % 16)) {
+			printk("%c\b", rotator[rotate & 0x3]);
+			rotate++;
+		}
+#endif
+	}
+	printk("done.\n");
+
+successful_load:
+	res = 1;
+done:
+	sys_close(in_fd);
+noclose_input:
+	sys_close(out_fd);
+out:
+	kfree(buf);
+	sys_unlink("/dev/ram");
+	return res;
+}
+
+int __init rd_load_disk(int n)
+{
+	if (rd_prompt)
+		change_floppy("root floppy disk to be loaded into RAM disk");
+	create_dev("/dev/root", ROOT_DEV, root_device_name);
+	create_dev("/dev/ram", MKDEV(RAMDISK_MAJOR, n), NULL);
+	return rd_load_image("/dev/root");
+}
+
+#ifdef BUILD_CRAMDISK
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args)  args
+
+#ifndef memzero
+#define memzero(s, n)     memset ((s), 0, (n))
+#endif
+
+typedef unsigned char  uch;
+typedef unsigned short ush;
+typedef unsigned long  ulg;
+
+#define INBUFSIZ 4096
+#define WSIZE 0x8000    /* window size--must be a power of two, and */
+			/*  at least 32K for zip's deflate method */
+
+static uch *inbuf;
+static uch *window;
+
+static unsigned insize;  /* valid bytes in inbuf */
+static unsigned inptr;   /* index of next byte to be processed in inbuf */
+static unsigned outcnt;  /* bytes in output buffer */
+static int exit_code;
+static int unzip_error;
+static long bytes_out;
+static int crd_infd, crd_outfd;
+
+#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
+		
+/* Diagnostic functions (stubbed out) */
+#define Assert(cond,msg)
+#define Trace(x)
+#define Tracev(x)
+#define Tracevv(x)
+#define Tracec(c,x)
+#define Tracecv(c,x)
+
+#define STATIC static
+#define INIT __init
+
+static int  __init fill_inbuf(void);
+static void __init flush_window(void);
+static void __init *malloc(size_t size);
+static void __init free(void *where);
+static void __init error(char *m);
+static void __init gzip_mark(void **);
+static void __init gzip_release(void **);
+
+#include "../lib/inflate.c"
+
+static void __init *malloc(size_t size)
+{
+	return kmalloc(size, GFP_KERNEL);
+}
+
+static void __init free(void *where)
+{
+	kfree(where);
+}
+
+static void __init gzip_mark(void **ptr)
+{
+}
+
+static void __init gzip_release(void **ptr)
+{
+}
+
+
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty
+ * and at least one byte is really needed.
+ * Returning -1 does not guarantee that gunzip() will ever return.
+ */
+static int __init fill_inbuf(void)
+{
+	if (exit_code) return -1;
+	
+	insize = sys_read(crd_infd, inbuf, INBUFSIZ);
+	if (insize == 0) {
+		error("RAMDISK: ran out of compressed data");
+		return -1;
+	}
+
+	inptr = 1;
+
+	return inbuf[0];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+static void __init flush_window(void)
+{
+    ulg c = crc;         /* temporary variable */
+    unsigned n, written;
+    uch *in, ch;
+    
+    written = sys_write(crd_outfd, window, outcnt);
+    if (written != outcnt && unzip_error == 0) {
+	printk(KERN_ERR "RAMDISK: incomplete write (%d != %d) %ld\n",
+	       written, outcnt, bytes_out);
+	unzip_error = 1;
+    }
+    in = window;
+    for (n = 0; n < outcnt; n++) {
+	    ch = *in++;
+	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+    }
+    crc = c;
+    bytes_out += (ulg)outcnt;
+    outcnt = 0;
+}
+
+static void __init error(char *x)
+{
+	printk(KERN_ERR "%s\n", x);
+	exit_code = 1;
+	unzip_error = 1;
+}
+
+static int __init crd_load(int in_fd, int out_fd)
+{
+	int result;
+
+	insize = 0;		/* valid bytes in inbuf */
+	inptr = 0;		/* index of next byte to be processed in inbuf */
+	outcnt = 0;		/* bytes in output buffer */
+	exit_code = 0;
+	bytes_out = 0;
+	crc = (ulg)0xffffffffL; /* shift register contents */
+
+	crd_infd = in_fd;
+	crd_outfd = out_fd;
+	inbuf = kmalloc(INBUFSIZ, GFP_KERNEL);
+	if (inbuf == 0) {
+		printk(KERN_ERR "RAMDISK: Couldn't allocate gzip buffer\n");
+		return -1;
+	}
+	window = kmalloc(WSIZE, GFP_KERNEL);
+	if (window == 0) {
+		printk(KERN_ERR "RAMDISK: Couldn't allocate gzip window\n");
+		kfree(inbuf);
+		return -1;
+	}
+	makecrc();
+	result = gunzip();
+	if (unzip_error)
+		result = 1;
+	kfree(inbuf);
+	kfree(window);
+	return result;
+}
+
+#endif  /* BUILD_CRAMDISK */
diff --git a/init/initramfs.c b/init/initramfs.c
new file mode 100644
index 000000000000..02c5ce64990d
--- /dev/null
+++ b/init/initramfs.c
@@ -0,0 +1,500 @@
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/syscalls.h>
+
+static __initdata char *message;
+static void __init error(char *x)
+{
+	if (!message)
+		message = x;
+}
+
+static void __init *malloc(size_t size)
+{
+	return kmalloc(size, GFP_KERNEL);
+}
+
+static void __init free(void *where)
+{
+	kfree(where);
+}
+
+/* link hash */
+
+static __initdata struct hash {
+	int ino, minor, major;
+	struct hash *next;
+	char *name;
+} *head[32];
+
+static inline int hash(int major, int minor, int ino)
+{
+	unsigned long tmp = ino + minor + (major << 3);
+	tmp += tmp >> 5;
+	return tmp & 31;
+}
+
+static char __init *find_link(int major, int minor, int ino, char *name)
+{
+	struct hash **p, *q;
+	for (p = head + hash(major, minor, ino); *p; p = &(*p)->next) {
+		if ((*p)->ino != ino)
+			continue;
+		if ((*p)->minor != minor)
+			continue;
+		if ((*p)->major != major)
+			continue;
+		return (*p)->name;
+	}
+	q = (struct hash *)malloc(sizeof(struct hash));
+	if (!q)
+		panic("can't allocate link hash entry");
+	q->ino = ino;
+	q->minor = minor;
+	q->major = major;
+	q->name = name;
+	q->next = NULL;
+	*p = q;
+	return NULL;
+}
+
+static void __init free_hash(void)
+{
+	struct hash **p, *q;
+	for (p = head; p < head + 32; p++) {
+		while (*p) {
+			q = *p;
+			*p = q->next;
+			free(q);
+		}
+	}
+}
+
+/* cpio header parsing */
+
+static __initdata unsigned long ino, major, minor, nlink;
+static __initdata mode_t mode;
+static __initdata unsigned long body_len, name_len;
+static __initdata uid_t uid;
+static __initdata gid_t gid;
+static __initdata unsigned rdev;
+
+static void __init parse_header(char *s)
+{
+	unsigned long parsed[12];
+	char buf[9];
+	int i;
+
+	buf[8] = '\0';
+	for (i = 0, s += 6; i < 12; i++, s += 8) {
+		memcpy(buf, s, 8);
+		parsed[i] = simple_strtoul(buf, NULL, 16);
+	}
+	ino = parsed[0];
+	mode = parsed[1];
+	uid = parsed[2];
+	gid = parsed[3];
+	nlink = parsed[4];
+	body_len = parsed[6];
+	major = parsed[7];
+	minor = parsed[8];
+	rdev = new_encode_dev(MKDEV(parsed[9], parsed[10]));
+	name_len = parsed[11];
+}
+
+/* FSM */
+
+static __initdata enum state {
+	Start,
+	Collect,
+	GotHeader,
+	SkipIt,
+	GotName,
+	CopyFile,
+	GotSymlink,
+	Reset
+} state, next_state;
+
+static __initdata char *victim;
+static __initdata unsigned count;
+static __initdata loff_t this_header, next_header;
+
+static __initdata int dry_run;
+
+static inline void eat(unsigned n)
+{
+	victim += n;
+	this_header += n;
+	count -= n;
+}
+
+#define N_ALIGN(len) ((((len) + 1) & ~3) + 2)
+
+static __initdata char *collected;
+static __initdata int remains;
+static __initdata char *collect;
+
+static void __init read_into(char *buf, unsigned size, enum state next)
+{
+	if (count >= size) {
+		collected = victim;
+		eat(size);
+		state = next;
+	} else {
+		collect = collected = buf;
+		remains = size;
+		next_state = next;
+		state = Collect;
+	}
+}
+
+static __initdata char *header_buf, *symlink_buf, *name_buf;
+
+static int __init do_start(void)
+{
+	read_into(header_buf, 110, GotHeader);
+	return 0;
+}
+
+static int __init do_collect(void)
+{
+	unsigned n = remains;
+	if (count < n)
+		n = count;
+	memcpy(collect, victim, n);
+	eat(n);
+	collect += n;
+	if ((remains -= n) != 0)
+		return 1;
+	state = next_state;
+	return 0;
+}
+
+static int __init do_header(void)
+{
+	if (memcmp(collected, "070701", 6)) {
+		error("no cpio magic");
+		return 1;
+	}
+	parse_header(collected);
+	next_header = this_header + N_ALIGN(name_len) + body_len;
+	next_header = (next_header + 3) & ~3;
+	if (dry_run) {
+		read_into(name_buf, N_ALIGN(name_len), GotName);
+		return 0;
+	}
+	state = SkipIt;
+	if (name_len <= 0 || name_len > PATH_MAX)
+		return 0;
+	if (S_ISLNK(mode)) {
+		if (body_len > PATH_MAX)
+			return 0;
+		collect = collected = symlink_buf;
+		remains = N_ALIGN(name_len) + body_len;
+		next_state = GotSymlink;
+		state = Collect;
+		return 0;
+	}
+	if (S_ISREG(mode) || !body_len)
+		read_into(name_buf, N_ALIGN(name_len), GotName);
+	return 0;
+}
+
+static int __init do_skip(void)
+{
+	if (this_header + count < next_header) {
+		eat(count);
+		return 1;
+	} else {
+		eat(next_header - this_header);
+		state = next_state;
+		return 0;
+	}
+}
+
+static int __init do_reset(void)
+{
+	while(count && *victim == '\0')
+		eat(1);
+	if (count && (this_header & 3))
+		error("broken padding");
+	return 1;
+}
+
+static int __init maybe_link(void)
+{
+	if (nlink >= 2) {
+		char *old = find_link(major, minor, ino, collected);
+		if (old)
+			return (sys_link(old, collected) < 0) ? -1 : 1;
+	}
+	return 0;
+}
+
+static __initdata int wfd;
+
+static int __init do_name(void)
+{
+	state = SkipIt;
+	next_state = Reset;
+	if (strcmp(collected, "TRAILER!!!") == 0) {
+		free_hash();
+		return 0;
+	}
+	if (dry_run)
+		return 0;
+	if (S_ISREG(mode)) {
+		if (maybe_link() >= 0) {
+			wfd = sys_open(collected, O_WRONLY|O_CREAT, mode);
+			if (wfd >= 0) {
+				sys_fchown(wfd, uid, gid);
+				sys_fchmod(wfd, mode);
+				state = CopyFile;
+			}
+		}
+	} else if (S_ISDIR(mode)) {
+		sys_mkdir(collected, mode);
+		sys_chown(collected, uid, gid);
+		sys_chmod(collected, mode);
+	} else if (S_ISBLK(mode) || S_ISCHR(mode) ||
+		   S_ISFIFO(mode) || S_ISSOCK(mode)) {
+		if (maybe_link() == 0) {
+			sys_mknod(collected, mode, rdev);
+			sys_chown(collected, uid, gid);
+			sys_chmod(collected, mode);
+		}
+	}
+	return 0;
+}
+
+static int __init do_copy(void)
+{
+	if (count >= body_len) {
+		sys_write(wfd, victim, body_len);
+		sys_close(wfd);
+		eat(body_len);
+		state = SkipIt;
+		return 0;
+	} else {
+		sys_write(wfd, victim, count);
+		body_len -= count;
+		eat(count);
+		return 1;
+	}
+}
+
+static int __init do_symlink(void)
+{
+	collected[N_ALIGN(name_len) + body_len] = '\0';
+	sys_symlink(collected + N_ALIGN(name_len), collected);
+	sys_lchown(collected, uid, gid);
+	state = SkipIt;
+	next_state = Reset;
+	return 0;
+}
+
+static __initdata int (*actions[])(void) = {
+	[Start]		= do_start,
+	[Collect]	= do_collect,
+	[GotHeader]	= do_header,
+	[SkipIt]	= do_skip,
+	[GotName]	= do_name,
+	[CopyFile]	= do_copy,
+	[GotSymlink]	= do_symlink,
+	[Reset]		= do_reset,
+};
+
+static int __init write_buffer(char *buf, unsigned len)
+{
+	count = len;
+	victim = buf;
+
+	while (!actions[state]())
+		;
+	return len - count;
+}
+
+static void __init flush_buffer(char *buf, unsigned len)
+{
+	int written;
+	if (message)
+		return;
+	while ((written = write_buffer(buf, len)) < len && !message) {
+		char c = buf[written];
+		if (c == '0') {
+			buf += written;
+			len -= written;
+			state = Start;
+		} else if (c == 0) {
+			buf += written;
+			len -= written;
+			state = Reset;
+		} else
+			error("junk in compressed archive");
+	}
+}
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args)  args
+
+#ifndef memzero
+#define memzero(s, n)     memset ((s), 0, (n))
+#endif
+
+typedef unsigned char  uch;
+typedef unsigned short ush;
+typedef unsigned long  ulg;
+
+#define WSIZE 0x8000    /* window size--must be a power of two, and */
+			/*  at least 32K for zip's deflate method */
+
+static uch *inbuf;
+static uch *window;
+
+static unsigned insize;  /* valid bytes in inbuf */
+static unsigned inptr;   /* index of next byte to be processed in inbuf */
+static unsigned outcnt;  /* bytes in output buffer */
+static long bytes_out;
+
+#define get_byte()  (inptr < insize ? inbuf[inptr++] : -1)
+		
+/* Diagnostic functions (stubbed out) */
+#define Assert(cond,msg)
+#define Trace(x)
+#define Tracev(x)
+#define Tracevv(x)
+#define Tracec(c,x)
+#define Tracecv(c,x)
+
+#define STATIC static
+#define INIT __init
+
+static void __init flush_window(void);
+static void __init error(char *m);
+static void __init gzip_mark(void **);
+static void __init gzip_release(void **);
+
+#include "../lib/inflate.c"
+
+static void __init gzip_mark(void **ptr)
+{
+}
+
+static void __init gzip_release(void **ptr)
+{
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+static void __init flush_window(void)
+{
+	ulg c = crc;         /* temporary variable */
+	unsigned n;
+	uch *in, ch;
+
+	flush_buffer(window, outcnt);
+	in = window;
+	for (n = 0; n < outcnt; n++) {
+		ch = *in++;
+		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+	}
+	crc = c;
+	bytes_out += (ulg)outcnt;
+	outcnt = 0;
+}
+
+static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only)
+{
+	int written;
+	dry_run = check_only;
+	header_buf = malloc(110);
+	symlink_buf = malloc(PATH_MAX + N_ALIGN(PATH_MAX) + 1);
+	name_buf = malloc(N_ALIGN(PATH_MAX));
+	window = malloc(WSIZE);
+	if (!window || !header_buf || !symlink_buf || !name_buf)
+		panic("can't allocate buffers");
+	state = Start;
+	this_header = 0;
+	message = NULL;
+	while (!message && len) {
+		loff_t saved_offset = this_header;
+		if (*buf == '0' && !(this_header & 3)) {
+			state = Start;
+			written = write_buffer(buf, len);
+			buf += written;
+			len -= written;
+			continue;
+		}
+		if (!*buf) {
+			buf++;
+			len--;
+			this_header++;
+			continue;
+		}
+		this_header = 0;
+		insize = len;
+		inbuf = buf;
+		inptr = 0;
+		outcnt = 0;		/* bytes in output buffer */
+		bytes_out = 0;
+		crc = (ulg)0xffffffffL; /* shift register contents */
+		makecrc();
+		gunzip();
+		if (state != Reset)
+			error("junk in gzipped archive");
+		this_header = saved_offset + inptr;
+		buf += inptr;
+		len -= inptr;
+	}
+	free(window);
+	free(name_buf);
+	free(symlink_buf);
+	free(header_buf);
+	return message;
+}
+
+extern char __initramfs_start[], __initramfs_end[];
+#ifdef CONFIG_BLK_DEV_INITRD
+#include <linux/initrd.h>
+#endif
+
+void __init populate_rootfs(void)
+{
+	char *err = unpack_to_rootfs(__initramfs_start,
+			 __initramfs_end - __initramfs_start, 0);
+	if (err)
+		panic(err);
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start) {
+		int fd;
+		printk(KERN_INFO "checking if image is initramfs...");
+		err = unpack_to_rootfs((char *)initrd_start,
+			initrd_end - initrd_start, 1);
+		if (!err) {
+			printk(" it is\n");
+			unpack_to_rootfs((char *)initrd_start,
+				initrd_end - initrd_start, 0);
+			free_initrd_mem(initrd_start, initrd_end);
+			return;
+		}
+		printk("it isn't (%s); looks like an initrd\n", err);
+		fd = sys_open("/initrd.image", O_WRONLY|O_CREAT, 700);
+		if (fd >= 0) {
+			sys_write(fd, (char *)initrd_start,
+					initrd_end - initrd_start);
+			sys_close(fd);
+			free_initrd_mem(initrd_start, initrd_end);
+		}
+	}
+#endif
+}
diff --git a/init/main.c b/init/main.c
new file mode 100644
index 000000000000..40bf367ffdf1
--- /dev/null
+++ b/init/main.c
@@ -0,0 +1,713 @@
+/*
+ *  linux/init/main.c
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
+ *  GK 2/5/95  -  Changed to support mounting root fs via NFS
+ *  Added initrd & change_root: Werner Almesberger & Hans Lermen, Feb '96
+ *  Moan early if gcc is old, avoiding bogus kernels - Paul Gortmaker, May '96
+ *  Simplified starting of init:  Michael A. Griffith <grif@acm.org> 
+ */
+
+#define __KERNEL_SYSCALLS__
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/proc_fs.h>
+#include <linux/devfs_fs_kernel.h>
+#include <linux/kernel.h>
+#include <linux/syscalls.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/utsname.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/smp_lock.h>
+#include <linux/initrd.h>
+#include <linux/hdreg.h>
+#include <linux/bootmem.h>
+#include <linux/tty.h>
+#include <linux/gfp.h>
+#include <linux/percpu.h>
+#include <linux/kmod.h>
+#include <linux/kernel_stat.h>
+#include <linux/security.h>
+#include <linux/workqueue.h>
+#include <linux/profile.h>
+#include <linux/rcupdate.h>
+#include <linux/moduleparam.h>
+#include <linux/kallsyms.h>
+#include <linux/writeback.h>
+#include <linux/cpu.h>
+#include <linux/cpuset.h>
+#include <linux/efi.h>
+#include <linux/unistd.h>
+#include <linux/rmap.h>
+#include <linux/mempolicy.h>
+#include <linux/key.h>
+
+#include <asm/io.h>
+#include <asm/bugs.h>
+#include <asm/setup.h>
+
+/*
+ * This is one of the first .c files built. Error out early
+ * if we have compiler trouble..
+ */
+#if __GNUC__ == 2 && __GNUC_MINOR__ == 96
+#ifdef CONFIG_FRAME_POINTER
+#error This compiler cannot compile correctly with frame pointers enabled
+#endif
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <asm/smp.h>
+#endif
+
+/*
+ * Versions of gcc older than that listed below may actually compile
+ * and link okay, but the end product can have subtle run time bugs.
+ * To avoid associated bogus bug reports, we flatly refuse to compile
+ * with a gcc that is known to be too old from the very beginning.
+ */
+#if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 95)
+#error Sorry, your GCC is too old. It builds incorrect kernels.
+#endif
+
+static int init(void *);
+
+extern void init_IRQ(void);
+extern void sock_init(void);
+extern void fork_init(unsigned long);
+extern void mca_init(void);
+extern void sbus_init(void);
+extern void sysctl_init(void);
+extern void signals_init(void);
+extern void buffer_init(void);
+extern void pidhash_init(void);
+extern void pidmap_init(void);
+extern void prio_tree_init(void);
+extern void radix_tree_init(void);
+extern void free_initmem(void);
+extern void populate_rootfs(void);
+extern void driver_init(void);
+extern void prepare_namespace(void);
+#ifdef	CONFIG_ACPI
+extern void acpi_early_init(void);
+#else
+static inline void acpi_early_init(void) { }
+#endif
+
+#ifdef CONFIG_TC
+extern void tc_init(void);
+#endif
+
+enum system_states system_state;
+EXPORT_SYMBOL(system_state);
+
+/*
+ * Boot command-line arguments
+ */
+#define MAX_INIT_ARGS CONFIG_INIT_ENV_ARG_LIMIT
+#define MAX_INIT_ENVS CONFIG_INIT_ENV_ARG_LIMIT
+
+extern void time_init(void);
+/* Default late time init is NULL. archs can override this later. */
+void (*late_time_init)(void);
+extern void softirq_init(void);
+
+/* Untouched command line (eg. for /proc) saved by arch-specific code. */
+char saved_command_line[COMMAND_LINE_SIZE];
+
+static char *execute_command;
+
+/* Setup configured maximum number of CPUs to activate */
+static unsigned int max_cpus = NR_CPUS;
+
+/*
+ * Setup routine for controlling SMP activation
+ *
+ * Command-line option of "nosmp" or "maxcpus=0" will disable SMP
+ * activation entirely (the MPS table probe still happens, though).
+ *
+ * Command-line option of "maxcpus=<NUM>", where <NUM> is an integer
+ * greater than 0, limits the maximum number of CPUs activated in
+ * SMP mode to <NUM>.
+ */
+static int __init nosmp(char *str)
+{
+	max_cpus = 0;
+	return 1;
+}
+
+__setup("nosmp", nosmp);
+
+static int __init maxcpus(char *str)
+{
+	get_option(&str, &max_cpus);
+	return 1;
+}
+
+__setup("maxcpus=", maxcpus);
+
+static char * argv_init[MAX_INIT_ARGS+2] = { "init", NULL, };
+char * envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, };
+static const char *panic_later, *panic_param;
+
+extern struct obs_kernel_param __setup_start[], __setup_end[];
+
+static int __init obsolete_checksetup(char *line)
+{
+	struct obs_kernel_param *p;
+
+	p = __setup_start;
+	do {
+		int n = strlen(p->str);
+		if (!strncmp(line, p->str, n)) {
+			if (p->early) {
+				/* Already done in parse_early_param?  (Needs
+				 * exact match on param part) */
+				if (line[n] == '\0' || line[n] == '=')
+					return 1;
+			} else if (!p->setup_func) {
+				printk(KERN_WARNING "Parameter %s is obsolete,"
+				       " ignored\n", p->str);
+				return 1;
+			} else if (p->setup_func(line + n))
+				return 1;
+		}
+		p++;
+	} while (p < __setup_end);
+	return 0;
+}
+
+/*
+ * This should be approx 2 Bo*oMips to start (note initial shift), and will
+ * still work even if initially too large, it will just take slightly longer
+ */
+unsigned long loops_per_jiffy = (1<<12);
+
+EXPORT_SYMBOL(loops_per_jiffy);
+
+static int __init debug_kernel(char *str)
+{
+	if (*str)
+		return 0;
+	console_loglevel = 10;
+	return 1;
+}
+
+static int __init quiet_kernel(char *str)
+{
+	if (*str)
+		return 0;
+	console_loglevel = 4;
+	return 1;
+}
+
+__setup("debug", debug_kernel);
+__setup("quiet", quiet_kernel);
+
+static int __init loglevel(char *str)
+{
+	get_option(&str, &console_loglevel);
+	return 1;
+}
+
+__setup("loglevel=", loglevel);
+
+/*
+ * Unknown boot options get handed to init, unless they look like
+ * failed parameters
+ */
+static int __init unknown_bootoption(char *param, char *val)
+{
+	/* Change NUL term back to "=", to make "param" the whole string. */
+	if (val) {
+		/* param=val or param="val"? */
+		if (val == param+strlen(param)+1)
+			val[-1] = '=';
+		else if (val == param+strlen(param)+2) {
+			val[-2] = '=';
+			memmove(val-1, val, strlen(val)+1);
+			val--;
+		} else
+			BUG();
+	}
+
+	/* Handle obsolete-style parameters */
+	if (obsolete_checksetup(param))
+		return 0;
+
+	/*
+	 * Preemptive maintenance for "why didn't my mispelled command
+	 * line work?"
+	 */
+	if (strchr(param, '.') && (!val || strchr(param, '.') < val)) {
+		printk(KERN_ERR "Unknown boot option `%s': ignoring\n", param);
+		return 0;
+	}
+
+	if (panic_later)
+		return 0;
+
+	if (val) {
+		/* Environment option */
+		unsigned int i;
+		for (i = 0; envp_init[i]; i++) {
+			if (i == MAX_INIT_ENVS) {
+				panic_later = "Too many boot env vars at `%s'";
+				panic_param = param;
+			}
+			if (!strncmp(param, envp_init[i], val - param))
+				break;
+		}
+		envp_init[i] = param;
+	} else {
+		/* Command line option */
+		unsigned int i;
+		for (i = 0; argv_init[i]; i++) {
+			if (i == MAX_INIT_ARGS) {
+				panic_later = "Too many boot init vars at `%s'";
+				panic_param = param;
+			}
+		}
+		argv_init[i] = param;
+	}
+	return 0;
+}
+
+static int __init init_setup(char *str)
+{
+	unsigned int i;
+
+	execute_command = str;
+	/*
+	 * In case LILO is going to boot us with default command line,
+	 * it prepends "auto" before the whole cmdline which makes
+	 * the shell think it should execute a script with such name.
+	 * So we ignore all arguments entered _before_ init=... [MJ]
+	 */
+	for (i = 1; i < MAX_INIT_ARGS; i++)
+		argv_init[i] = NULL;
+	return 1;
+}
+__setup("init=", init_setup);
+
+extern void setup_arch(char **);
+
+#ifndef CONFIG_SMP
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static void __init smp_init(void)
+{
+	APIC_init_uniprocessor();
+}
+#else
+#define smp_init()	do { } while (0)
+#endif
+
+static inline void setup_per_cpu_areas(void) { }
+static inline void smp_prepare_cpus(unsigned int maxcpus) { }
+
+#else
+
+#ifdef __GENERIC_PER_CPU
+unsigned long __per_cpu_offset[NR_CPUS];
+
+EXPORT_SYMBOL(__per_cpu_offset);
+
+static void __init setup_per_cpu_areas(void)
+{
+	unsigned long size, i;
+	char *ptr;
+	/* Created by linker magic */
+	extern char __per_cpu_start[], __per_cpu_end[];
+
+	/* Copy section for each CPU (we discard the original) */
+	size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES);
+#ifdef CONFIG_MODULES
+	if (size < PERCPU_ENOUGH_ROOM)
+		size = PERCPU_ENOUGH_ROOM;
+#endif
+
+	ptr = alloc_bootmem(size * NR_CPUS);
+
+	for (i = 0; i < NR_CPUS; i++, ptr += size) {
+		__per_cpu_offset[i] = ptr - __per_cpu_start;
+		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+	}
+}
+#endif /* !__GENERIC_PER_CPU */
+
+/* Called by boot processor to activate the rest. */
+static void __init smp_init(void)
+{
+	unsigned int i;
+
+	/* FIXME: This should be done in userspace --RR */
+	for_each_present_cpu(i) {
+		if (num_online_cpus() >= max_cpus)
+			break;
+		if (!cpu_online(i))
+			cpu_up(i);
+	}
+
+	/* Any cleanup work */
+	printk(KERN_INFO "Brought up %ld CPUs\n", (long)num_online_cpus());
+	smp_cpus_done(max_cpus);
+#if 0
+	/* Get other processors into their bootup holding patterns. */
+
+	smp_commence();
+#endif
+}
+
+#endif
+
+/*
+ * We need to finalize in a non-__init function or else race conditions
+ * between the root thread and the init thread may cause start_kernel to
+ * be reaped by free_initmem before the root thread has proceeded to
+ * cpu_idle.
+ *
+ * gcc-3.4 accidentally inlines this function, so use noinline.
+ */
+
+static void noinline rest_init(void)
+	__releases(kernel_lock)
+{
+	kernel_thread(init, NULL, CLONE_FS | CLONE_SIGHAND);
+	numa_default_policy();
+	unlock_kernel();
+	preempt_enable_no_resched();
+	cpu_idle();
+} 
+
+/* Check for early params. */
+static int __init do_early_param(char *param, char *val)
+{
+	struct obs_kernel_param *p;
+
+	for (p = __setup_start; p < __setup_end; p++) {
+		if (p->early && strcmp(param, p->str) == 0) {
+			if (p->setup_func(val) != 0)
+				printk(KERN_WARNING
+				       "Malformed early option '%s'\n", param);
+		}
+	}
+	/* We accept everything at this stage. */
+	return 0;
+}
+
+/* Arch code calls this early on, or if not, just before other parsing. */
+void __init parse_early_param(void)
+{
+	static __initdata int done = 0;
+	static __initdata char tmp_cmdline[COMMAND_LINE_SIZE];
+
+	if (done)
+		return;
+
+	/* All fall through to do_early_param. */
+	strlcpy(tmp_cmdline, saved_command_line, COMMAND_LINE_SIZE);
+	parse_args("early options", tmp_cmdline, NULL, 0, do_early_param);
+	done = 1;
+}
+
+/*
+ *	Activate the first processor.
+ */
+
+asmlinkage void __init start_kernel(void)
+{
+	char * command_line;
+	extern struct kernel_param __start___param[], __stop___param[];
+/*
+ * Interrupts are still disabled. Do necessary setups, then
+ * enable them
+ */
+	lock_kernel();
+	page_address_init();
+	printk(KERN_NOTICE);
+	printk(linux_banner);
+	setup_arch(&command_line);
+	setup_per_cpu_areas();
+
+	/*
+	 * Mark the boot cpu "online" so that it can call console drivers in
+	 * printk() and can access its per-cpu storage.
+	 */
+	smp_prepare_boot_cpu();
+
+	/*
+	 * Set up the scheduler prior starting any interrupts (such as the
+	 * timer interrupt). Full topology setup happens at smp_init()
+	 * time - but meanwhile we still have a functioning scheduler.
+	 */
+	sched_init();
+	/*
+	 * Disable preemption - early bootup scheduling is extremely
+	 * fragile until we cpu_idle() for the first time.
+	 */
+	preempt_disable();
+	build_all_zonelists();
+	page_alloc_init();
+	printk(KERN_NOTICE "Kernel command line: %s\n", saved_command_line);
+	parse_early_param();
+	parse_args("Booting kernel", command_line, __start___param,
+		   __stop___param - __start___param,
+		   &unknown_bootoption);
+	sort_main_extable();
+	trap_init();
+	rcu_init();
+	init_IRQ();
+	pidhash_init();
+	init_timers();
+	softirq_init();
+	time_init();
+
+	/*
+	 * HACK ALERT! This is early. We're enabling the console before
+	 * we've done PCI setups etc, and console_init() must be aware of
+	 * this. But we do want output early, in case something goes wrong.
+	 */
+	console_init();
+	if (panic_later)
+		panic(panic_later, panic_param);
+	profile_init();
+	local_irq_enable();
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start && !initrd_below_start_ok &&
+			initrd_start < min_low_pfn << PAGE_SHIFT) {
+		printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - "
+		    "disabling it.\n",initrd_start,min_low_pfn << PAGE_SHIFT);
+		initrd_start = 0;
+	}
+#endif
+	vfs_caches_init_early();
+	mem_init();
+	kmem_cache_init();
+	numa_policy_init();
+	if (late_time_init)
+		late_time_init();
+	calibrate_delay();
+	pidmap_init();
+	pgtable_cache_init();
+	prio_tree_init();
+	anon_vma_init();
+#ifdef CONFIG_X86
+	if (efi_enabled)
+		efi_enter_virtual_mode();
+#endif
+	fork_init(num_physpages);
+	proc_caches_init();
+	buffer_init();
+	unnamed_dev_init();
+	key_init();
+	security_init();
+	vfs_caches_init(num_physpages);
+	radix_tree_init();
+	signals_init();
+	/* rootfs populating might need page-writeback */
+	page_writeback_init();
+#ifdef CONFIG_PROC_FS
+	proc_root_init();
+#endif
+	cpuset_init();
+
+	check_bugs();
+
+	acpi_early_init(); /* before LAPIC and SMP init */
+
+	/* Do the rest non-__init'ed, we're now alive */
+	rest_init();
+}
+
+static int __initdata initcall_debug;
+
+static int __init initcall_debug_setup(char *str)
+{
+	initcall_debug = 1;
+	return 1;
+}
+__setup("initcall_debug", initcall_debug_setup);
+
+struct task_struct *child_reaper = &init_task;
+
+extern initcall_t __initcall_start[], __initcall_end[];
+
+static void __init do_initcalls(void)
+{
+	initcall_t *call;
+	int count = preempt_count();
+
+	for (call = __initcall_start; call < __initcall_end; call++) {
+		char *msg;
+
+		if (initcall_debug) {
+			printk(KERN_DEBUG "Calling initcall 0x%p", *call);
+			print_fn_descriptor_symbol(": %s()", (unsigned long) *call);
+			printk("\n");
+		}
+
+		(*call)();
+
+		msg = NULL;
+		if (preempt_count() != count) {
+			msg = "preemption imbalance";
+			preempt_count() = count;
+		}
+		if (irqs_disabled()) {
+			msg = "disabled interrupts";
+			local_irq_enable();
+		}
+		if (msg) {
+			printk(KERN_WARNING "error in initcall at 0x%p: "
+				"returned with %s\n", *call, msg);
+		}
+	}
+
+	/* Make sure there is no pending stuff from the initcall sequence */
+	flush_scheduled_work();
+}
+
+/*
+ * Ok, the machine is now initialized. None of the devices
+ * have been touched yet, but the CPU subsystem is up and
+ * running, and memory and process management works.
+ *
+ * Now we can finally start doing some real work..
+ */
+static void __init do_basic_setup(void)
+{
+	/* drivers will send hotplug events */
+	init_workqueues();
+	usermodehelper_init();
+	driver_init();
+
+#ifdef CONFIG_SYSCTL
+	sysctl_init();
+#endif
+
+	/* Networking initialization needs a process context */ 
+	sock_init();
+
+	do_initcalls();
+}
+
+static void do_pre_smp_initcalls(void)
+{
+	extern int spawn_ksoftirqd(void);
+#ifdef CONFIG_SMP
+	extern int migration_init(void);
+
+	migration_init();
+#endif
+	spawn_ksoftirqd();
+}
+
+static void run_init_process(char *init_filename)
+{
+	argv_init[0] = init_filename;
+	execve(init_filename, argv_init, envp_init);
+}
+
+static inline void fixup_cpu_present_map(void)
+{
+#ifdef CONFIG_SMP
+	int i;
+
+	/*
+	 * If arch is not hotplug ready and did not populate
+	 * cpu_present_map, just make cpu_present_map same as cpu_possible_map
+	 * for other cpu bringup code to function as normal. e.g smp_init() etc.
+	 */
+	if (cpus_empty(cpu_present_map)) {
+		for_each_cpu(i) {
+			cpu_set(i, cpu_present_map);
+		}
+	}
+#endif
+}
+
+static int init(void * unused)
+{
+	lock_kernel();
+	/*
+	 * init can run on any cpu.
+	 */
+	set_cpus_allowed(current, CPU_MASK_ALL);
+	/*
+	 * Tell the world that we're going to be the grim
+	 * reaper of innocent orphaned children.
+	 *
+	 * We don't want people to have to make incorrect
+	 * assumptions about where in the task array this
+	 * can be found.
+	 */
+	child_reaper = current;
+
+	/* Sets up cpus_possible() */
+	smp_prepare_cpus(max_cpus);
+
+	do_pre_smp_initcalls();
+
+	fixup_cpu_present_map();
+	smp_init();
+	sched_init_smp();
+
+	cpuset_init_smp();
+
+	/*
+	 * Do this before initcalls, because some drivers want to access
+	 * firmware files.
+	 */
+	populate_rootfs();
+
+	do_basic_setup();
+
+	/*
+	 * check if there is an early userspace init.  If yes, let it do all
+	 * the work
+	 */
+	if (sys_access((const char __user *) "/init", 0) == 0)
+		execute_command = "/init";
+	else
+		prepare_namespace();
+
+	/*
+	 * Ok, we have completed the initial bootup, and
+	 * we're essentially up and running. Get rid of the
+	 * initmem segments and start the user-mode stuff..
+	 */
+	free_initmem();
+	unlock_kernel();
+	system_state = SYSTEM_RUNNING;
+	numa_default_policy();
+
+	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+		printk(KERN_WARNING "Warning: unable to open an initial console.\n");
+
+	(void) sys_dup(0);
+	(void) sys_dup(0);
+	
+	/*
+	 * We try each of these until one succeeds.
+	 *
+	 * The Bourne shell can be used instead of init if we are 
+	 * trying to recover a really broken machine.
+	 */
+
+	if (execute_command)
+		run_init_process(execute_command);
+
+	run_init_process("/sbin/init");
+	run_init_process("/etc/init");
+	run_init_process("/bin/init");
+	run_init_process("/bin/sh");
+
+	panic("No init found.  Try passing init= option to kernel.");
+}
diff --git a/init/version.c b/init/version.c
new file mode 100644
index 000000000000..3ddc3ceec2fe
--- /dev/null
+++ b/init/version.c
@@ -0,0 +1,33 @@
+/*
+ *  linux/init/version.c
+ *
+ *  Copyright (C) 1992  Theodore Ts'o
+ *
+ *  May be freely distributed as part of Linux.
+ */
+
+#include <linux/compile.h>
+#include <linux/module.h>
+#include <linux/uts.h>
+#include <linux/utsname.h>
+#include <linux/version.h>
+
+#define version(a) Version_ ## a
+#define version_string(a) version(a)
+
+int version_string(LINUX_VERSION_CODE);
+
+struct new_utsname system_utsname = {
+	.sysname	= UTS_SYSNAME,
+	.nodename	= UTS_NODENAME,
+	.release	= UTS_RELEASE,
+	.version	= UTS_VERSION,
+	.machine	= UTS_MACHINE,
+	.domainname	= UTS_DOMAINNAME,
+};
+
+EXPORT_SYMBOL(system_utsname);
+
+const char linux_banner[] =
+	"Linux version " UTS_RELEASE " (" LINUX_COMPILE_BY "@"
+	LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION "\n";