rcu: add call_rcu_sched()

Fourth cut of patch to provide the call_rcu_sched().  This is again to
synchronize_sched() as call_rcu() is to synchronize_rcu().

Should be fine for experimental and -rt use, but not ready for inclusion.
With some luck, I will be able to tell Andrew to come out of hiding on
the next round.

Passes multi-day rcutorture sessions with concurrent CPU hotplugging.

Fixes since the first version include a bug that could result in
indefinite blocking (spotted by Gautham Shenoy), better resiliency
against CPU-hotplug operations, and other minor fixes.

Fixes since the second version include reworking grace-period detection
to avoid deadlocks that could happen when running concurrently with
CPU hotplug, adding Mathieu's fix to avoid the softlockup messages,
as well as Mathieu's fix to allow use earlier in boot.

Fixes since the third version include a wrong-CPU bug spotted by
Andrew, getting rid of the obsolete synchronize_kernel API that somehow
snuck back in, merging spin_unlock() and local_irq_restore() in a
few places, commenting the code that checks for quiescent states based
on interrupting from user-mode execution or the idle loop, removing
some inline attributes, and some code-style changes.

Known/suspected shortcomings:

o	I still do not entirely trust the sleep/wakeup logic.  Next step
	will be to use a private snapshot of the CPU online mask in
	rcu_sched_grace_period() -- if the CPU wasn't there at the start
	of the grace period, we don't need to hear from it.  And the
	bit about accounting for changes in online CPUs inside of
	rcu_sched_grace_period() is ugly anyway.

o	It might be good for rcu_sched_grace_period() to invoke
	resched_cpu() when a given CPU wasn't responding quickly,
	but resched_cpu() is declared static...

This patch also fixes a long-standing bug in the earlier preemptable-RCU
implementation of synchronize_rcu() that could result in loss of
concurrent external changes to a task's CPU affinity mask.  I still cannot
remember who reported this...

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2 files changed, 372 insertions, 62 deletions

diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index c09605f8d16c..a4e329d92883 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -39,18 +39,12 @@
 #include <linux/sched.h>
 #include <asm/atomic.h>
 #include <linux/bitops.h>
-#include <linux/completion.h>
 #include <linux/percpu.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>
 #include <linux/mutex.h>
 #include <linux/module.h>
 
-struct rcu_synchronize {
-	struct rcu_head head;
-	struct completion completion;
-};
-
 static DEFINE_PER_CPU(struct rcu_head, rcu_barrier_head) = {NULL};
 static atomic_t rcu_barrier_cpu_count;
 static DEFINE_MUTEX(rcu_barrier_mutex);
@@ -60,7 +54,7 @@ static struct completion rcu_barrier_completion;
  * Awaken the corresponding synchronize_rcu() instance now that a
  * grace period has elapsed.
  */
-static void wakeme_after_rcu(struct rcu_head  *head)
+void wakeme_after_rcu(struct rcu_head  *head)
 {
 	struct rcu_synchronize *rcu;
 
@@ -77,17 +71,7 @@ static void wakeme_after_rcu(struct rcu_head  *head)
  * sections are delimited by rcu_read_lock() and rcu_read_unlock(),
  * and may be nested.
  */
-void synchronize_rcu(void)
-{
-	struct rcu_synchronize rcu;
-
-	init_completion(&rcu.completion);
-	/* Will wake me after RCU finished */
-	call_rcu(&rcu.head, wakeme_after_rcu);
-
-	/* Wait for it */
-	wait_for_completion(&rcu.completion);
-}
+synchronize_rcu_xxx(synchronize_rcu, call_rcu)
 EXPORT_SYMBOL_GPL(synchronize_rcu);
 
 static void rcu_barrier_callback(struct rcu_head *notused)
diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c
index 5e02b7740702..aaa7976bd85f 100644
--- a/kernel/rcupreempt.c
+++ b/kernel/rcupreempt.c
@@ -46,6 +46,7 @@
 #include <asm/atomic.h>
 #include <linux/bitops.h>
 #include <linux/module.h>
+#include <linux/kthread.h>
 #include <linux/completion.h>
 #include <linux/moduleparam.h>
 #include <linux/percpu.h>
@@ -87,9 +88,14 @@ struct rcu_data {
 	struct rcu_head **nexttail;
 	struct rcu_head *waitlist[GP_STAGES];
 	struct rcu_head **waittail[GP_STAGES];
-	struct rcu_head *donelist;
+	struct rcu_head *donelist;	/* from waitlist & waitschedlist */
 	struct rcu_head **donetail;
 	long rcu_flipctr[2];
+	struct rcu_head *nextschedlist;
+	struct rcu_head **nextschedtail;
+	struct rcu_head *waitschedlist;
+	struct rcu_head **waitschedtail;
+	int rcu_sched_sleeping;
 #ifdef CONFIG_RCU_TRACE
 	struct rcupreempt_trace trace;
 #endif /* #ifdef CONFIG_RCU_TRACE */
@@ -131,11 +137,24 @@ enum rcu_try_flip_states {
 	rcu_try_flip_waitmb_state,
 };
 
+/*
+ * States for rcu_ctrlblk.rcu_sched_sleep.
+ */
+
+enum rcu_sched_sleep_states {
+	rcu_sched_not_sleeping,	/* Not sleeping, callbacks need GP.  */
+	rcu_sched_sleep_prep,	/* Thinking of sleeping, rechecking. */
+	rcu_sched_sleeping,	/* Sleeping, awaken if GP needed. */
+};
+
 struct rcu_ctrlblk {
 	spinlock_t	fliplock;	/* Protect state-machine transitions. */
 	long		completed;	/* Number of last completed batch. */
 	enum rcu_try_flip_states rcu_try_flip_state; /* The current state of
 							the rcu state machine */
+	spinlock_t	schedlock;	/* Protect rcu_sched sleep state. */
+	enum rcu_sched_sleep_states sched_sleep; /* rcu_sched state. */
+	wait_queue_head_t sched_wq;	/* Place for rcu_sched to sleep. */
 };
 
 static DEFINE_PER_CPU(struct rcu_data, rcu_data);
@@ -143,8 +162,12 @@ static struct rcu_ctrlblk rcu_ctrlblk = {
 	.fliplock = __SPIN_LOCK_UNLOCKED(rcu_ctrlblk.fliplock),
 	.completed = 0,
 	.rcu_try_flip_state = rcu_try_flip_idle_state,
+	.schedlock = __SPIN_LOCK_UNLOCKED(rcu_ctrlblk.schedlock),
+	.sched_sleep = rcu_sched_not_sleeping,
+	.sched_wq = __WAIT_QUEUE_HEAD_INITIALIZER(rcu_ctrlblk.sched_wq),
 };
 
+static struct task_struct *rcu_sched_grace_period_task;
 
 #ifdef CONFIG_RCU_TRACE
 static char *rcu_try_flip_state_names[] =
@@ -207,6 +230,8 @@ static DEFINE_PER_CPU_SHARED_ALIGNED(enum rcu_mb_flag_values, rcu_mb_flag)
  */
 #define RCU_TRACE_RDP(f, rdp) RCU_TRACE(f, &((rdp)->trace));
 
+#define RCU_SCHED_BATCH_TIME (HZ / 50)
+
 /*
  * Return the number of RCU batches processed thus far.  Useful
  * for debug and statistics.
@@ -411,32 +436,34 @@ static void __rcu_advance_callbacks(struct rcu_data *rdp)
 	}
 }
 
-#ifdef CONFIG_NO_HZ
+DEFINE_PER_CPU_SHARED_ALIGNED(struct rcu_dyntick_sched, rcu_dyntick_sched) = {
+	.dynticks = 1,
+};
 
-DEFINE_PER_CPU(long, dynticks_progress_counter) = 1;
-static DEFINE_PER_CPU(long, rcu_dyntick_snapshot);
+#ifdef CONFIG_NO_HZ
 static DEFINE_PER_CPU(int, rcu_update_flag);
 
 /**
  * rcu_irq_enter - Called from Hard irq handlers and NMI/SMI.
  *
  * If the CPU was idle with dynamic ticks active, this updates the
- * dynticks_progress_counter to let the RCU handling know that the
+ * rcu_dyntick_sched.dynticks to let the RCU handling know that the
  * CPU is active.
  */
 void rcu_irq_enter(void)
 {
 	int cpu = smp_processor_id();
+	struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
 
 	if (per_cpu(rcu_update_flag, cpu))
 		per_cpu(rcu_update_flag, cpu)++;
 
 	/*
 	 * Only update if we are coming from a stopped ticks mode
-	 * (dynticks_progress_counter is even).
+	 * (rcu_dyntick_sched.dynticks is even).
 	 */
 	if (!in_interrupt() &&
-	    (per_cpu(dynticks_progress_counter, cpu) & 0x1) == 0) {
+	    (rdssp->dynticks & 0x1) == 0) {
 		/*
 		 * The following might seem like we could have a race
 		 * with NMI/SMIs. But this really isn't a problem.
@@ -459,12 +486,12 @@ void rcu_irq_enter(void)
 		 * RCU read-side critical sections on this CPU would
 		 * have already completed.
 		 */
-		per_cpu(dynticks_progress_counter, cpu)++;
+		rdssp->dynticks++;
 		/*
 		 * The following memory barrier ensures that any
 		 * rcu_read_lock() primitives in the irq handler
 		 * are seen by other CPUs to follow the above
-		 * increment to dynticks_progress_counter. This is
+		 * increment to rcu_dyntick_sched.dynticks. This is
 		 * required in order for other CPUs to correctly
 		 * determine when it is safe to advance the RCU
 		 * grace-period state machine.
@@ -472,7 +499,7 @@ void rcu_irq_enter(void)
 		smp_mb(); /* see above block comment. */
 		/*
 		 * Since we can't determine the dynamic tick mode from
-		 * the dynticks_progress_counter after this routine,
+		 * the rcu_dyntick_sched.dynticks after this routine,
 		 * we use a second flag to acknowledge that we came
 		 * from an idle state with ticks stopped.
 		 */
@@ -480,7 +507,7 @@ void rcu_irq_enter(void)
 		/*
 		 * If we take an NMI/SMI now, they will also increment
 		 * the rcu_update_flag, and will not update the
-		 * dynticks_progress_counter on exit. That is for
+		 * rcu_dyntick_sched.dynticks on exit. That is for
 		 * this IRQ to do.
 		 */
 	}
@@ -490,12 +517,13 @@ void rcu_irq_enter(void)
  * rcu_irq_exit - Called from exiting Hard irq context.
  *
  * If the CPU was idle with dynamic ticks active, update the
- * dynticks_progress_counter to put let the RCU handling be
+ * rcu_dyntick_sched.dynticks to put let the RCU handling be
  * aware that the CPU is going back to idle with no ticks.
  */
 void rcu_irq_exit(void)
 {
 	int cpu = smp_processor_id();
+	struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
 
 	/*
 	 * rcu_update_flag is set if we interrupted the CPU
@@ -503,7 +531,7 @@ void rcu_irq_exit(void)
 	 * Once this occurs, we keep track of interrupt nesting
 	 * because a NMI/SMI could also come in, and we still
 	 * only want the IRQ that started the increment of the
-	 * dynticks_progress_counter to be the one that modifies
+	 * rcu_dyntick_sched.dynticks to be the one that modifies
 	 * it on exit.
 	 */
 	if (per_cpu(rcu_update_flag, cpu)) {
@@ -515,28 +543,29 @@ void rcu_irq_exit(void)
 
 		/*
 		 * If an NMI/SMI happens now we are still
-		 * protected by the dynticks_progress_counter being odd.
+		 * protected by the rcu_dyntick_sched.dynticks being odd.
 		 */
 
 		/*
 		 * The following memory barrier ensures that any
 		 * rcu_read_unlock() primitives in the irq handler
 		 * are seen by other CPUs to preceed the following
-		 * increment to dynticks_progress_counter. This
+		 * increment to rcu_dyntick_sched.dynticks. This
 		 * is required in order for other CPUs to determine
 		 * when it is safe to advance the RCU grace-period
 		 * state machine.
 		 */
 		smp_mb(); /* see above block comment. */
-		per_cpu(dynticks_progress_counter, cpu)++;
-		WARN_ON(per_cpu(dynticks_progress_counter, cpu) & 0x1);
+		rdssp->dynticks++;
+		WARN_ON(rdssp->dynticks & 0x1);
 	}
 }
 
 static void dyntick_save_progress_counter(int cpu)
 {
-	per_cpu(rcu_dyntick_snapshot, cpu) =
-		per_cpu(dynticks_progress_counter, cpu);
+	struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
+
+	rdssp->dynticks_snap = rdssp->dynticks;
 }
 
 static inline int
@@ -544,9 +573,10 @@ rcu_try_flip_waitack_needed(int cpu)
 {
 	long curr;
 	long snap;
+	struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
 
-	curr = per_cpu(dynticks_progress_counter, cpu);
-	snap = per_cpu(rcu_dyntick_snapshot, cpu);
+	curr = rdssp->dynticks;
+	snap = rdssp->dynticks_snap;
 	smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
 
 	/*
@@ -580,9 +610,10 @@ rcu_try_flip_waitmb_needed(int cpu)
 {
 	long curr;
 	long snap;
+	struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
 
-	curr = per_cpu(dynticks_progress_counter, cpu);
-	snap = per_cpu(rcu_dyntick_snapshot, cpu);
+	curr = rdssp->dynticks;
+	snap = rdssp->dynticks_snap;
 	smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
 
 	/*
@@ -609,14 +640,86 @@ rcu_try_flip_waitmb_needed(int cpu)
 	return 1;
 }
 
+static void dyntick_save_progress_counter_sched(int cpu)
+{
+	struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
+
+	rdssp->sched_dynticks_snap = rdssp->dynticks;
+}
+
+static int rcu_qsctr_inc_needed_dyntick(int cpu)
+{
+	long curr;
+	long snap;
+	struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
+
+	curr = rdssp->dynticks;
+	snap = rdssp->sched_dynticks_snap;
+	smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
+
+	/*
+	 * If the CPU remained in dynticks mode for the entire time
+	 * and didn't take any interrupts, NMIs, SMIs, or whatever,
+	 * then it cannot be in the middle of an rcu_read_lock(), so
+	 * the next rcu_read_lock() it executes must use the new value
+	 * of the counter.  Therefore, this CPU has been in a quiescent
+	 * state the entire time, and we don't need to wait for it.
+	 */
+
+	if ((curr == snap) && ((curr & 0x1) == 0))
+		return 0;
+
+	/*
+	 * If the CPU passed through or entered a dynticks idle phase with
+	 * no active irq handlers, then, as above, this CPU has already
+	 * passed through a quiescent state.
+	 */
+
+	if ((curr - snap) > 2 || (snap & 0x1) == 0)
+		return 0;
+
+	/* We need this CPU to go through a quiescent state. */
+
+	return 1;
+}
+
 #else /* !CONFIG_NO_HZ */
 
-# define dyntick_save_progress_counter(cpu)	do { } while (0)
-# define rcu_try_flip_waitack_needed(cpu)	(1)
-# define rcu_try_flip_waitmb_needed(cpu)	(1)
+# define dyntick_save_progress_counter(cpu)		do { } while (0)
+# define rcu_try_flip_waitack_needed(cpu)		(1)
+# define rcu_try_flip_waitmb_needed(cpu)		(1)
+
+# define dyntick_save_progress_counter_sched(cpu)	do { } while (0)
+# define rcu_qsctr_inc_needed_dyntick(cpu)		(1)
 
 #endif /* CONFIG_NO_HZ */
 
+static void save_qsctr_sched(int cpu)
+{
+	struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
+
+	rdssp->sched_qs_snap = rdssp->sched_qs;
+}
+
+static inline int rcu_qsctr_inc_needed(int cpu)
+{
+	struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu);
+
+	/*
+	 * If there has been a quiescent state, no more need to wait
+	 * on this CPU.
+	 */
+
+	if (rdssp->sched_qs != rdssp->sched_qs_snap) {
+		smp_mb(); /* force ordering with cpu entering schedule(). */
+		return 0;
+	}
+
+	/* We need this CPU to go through a quiescent state. */
+
+	return 1;
+}
+
 /*
  * Get here when RCU is idle.  Decide whether we need to
  * move out of idle state, and return non-zero if so.
@@ -819,6 +922,26 @@ void rcu_check_callbacks(int cpu, int user)
 	unsigned long flags;
 	struct rcu_data *rdp = RCU_DATA_CPU(cpu);
 
+	/*
+	 * If this CPU took its interrupt from user mode or from the
+	 * idle loop, and this is not a nested interrupt, then
+	 * this CPU has to have exited all prior preept-disable
+	 * sections of code.  So increment the counter to note this.
+	 *
+	 * The memory barrier is needed to handle the case where
+	 * writes from a preempt-disable section of code get reordered
+	 * into schedule() by this CPU's write buffer.  So the memory
+	 * barrier makes sure that the rcu_qsctr_inc() is seen by other
+	 * CPUs to happen after any such write.
+	 */
+
+	if (user ||
+	    (idle_cpu(cpu) && !in_softirq() &&
+	     hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
+		smp_mb();	/* Guard against aggressive schedule(). */
+	     	rcu_qsctr_inc(cpu);
+	}
+
 	rcu_check_mb(cpu);
 	if (rcu_ctrlblk.completed == rdp->completed)
 		rcu_try_flip();
@@ -869,6 +992,8 @@ void rcu_offline_cpu(int cpu)
 	struct rcu_head *list = NULL;
 	unsigned long flags;
 	struct rcu_data *rdp = RCU_DATA_CPU(cpu);
+	struct rcu_head *schedlist = NULL;
+	struct rcu_head **schedtail = &schedlist;
 	struct rcu_head **tail = &list;
 
 	/*
@@ -882,6 +1007,11 @@ void rcu_offline_cpu(int cpu)
 		rcu_offline_cpu_enqueue(rdp->waitlist[i], rdp->waittail[i],
 						list, tail);
 	rcu_offline_cpu_enqueue(rdp->nextlist, rdp->nexttail, list, tail);
+	rcu_offline_cpu_enqueue(rdp->waitschedlist, rdp->waitschedtail,
+				schedlist, schedtail);
+	rcu_offline_cpu_enqueue(rdp->nextschedlist, rdp->nextschedtail,
+				schedlist, schedtail);
+	rdp->rcu_sched_sleeping = 0;
 	spin_unlock_irqrestore(&rdp->lock, flags);
 	rdp->waitlistcount = 0;
 
@@ -916,22 +1046,40 @@ void rcu_offline_cpu(int cpu)
 	 * fix.
 	 */
 
-	local_irq_save(flags);
+	local_irq_save(flags);  /* disable preempt till we know what lock. */
 	rdp = RCU_DATA_ME();
 	spin_lock(&rdp->lock);
 	*rdp->nexttail = list;
 	if (list)
 		rdp->nexttail = tail;
+	*rdp->nextschedtail = schedlist;
+	if (schedlist)
+		rdp->nextschedtail = schedtail;
 	spin_unlock_irqrestore(&rdp->lock, flags);
 }
 
 void __devinit rcu_online_cpu(int cpu)
 {
 	unsigned long flags;
+	struct rcu_data *rdp;
 
 	spin_lock_irqsave(&rcu_ctrlblk.fliplock, flags);
 	cpu_set(cpu, rcu_cpu_online_map);
 	spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags);
+
+	/*
+	 * The rcu_sched grace-period processing might have bypassed
+	 * this CPU, given that it was not in the rcu_cpu_online_map
+	 * when the grace-period scan started.  This means that the
+	 * grace-period task might sleep.  So make sure that if this
+	 * should happen, the first callback posted to this CPU will
+	 * wake up the grace-period task if need be.
+	 */
+
+	rdp = RCU_DATA_CPU(cpu);
+	spin_lock_irqsave(&rdp->lock, flags);
+	rdp->rcu_sched_sleeping = 1;
+	spin_unlock_irqrestore(&rdp->lock, flags);
 }
 
 #else /* #ifdef CONFIG_HOTPLUG_CPU */
@@ -986,31 +1134,196 @@ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
 	*rdp->nexttail = head;
 	rdp->nexttail = &head->next;
 	RCU_TRACE_RDP(rcupreempt_trace_next_add, rdp);
-	spin_unlock(&rdp->lock);
-	local_irq_restore(flags);
+	spin_unlock_irqrestore(&rdp->lock, flags);
 }
 EXPORT_SYMBOL_GPL(call_rcu);
 
+void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
+{
+	unsigned long flags;
+	struct rcu_data *rdp;
+	int wake_gp = 0;
+
+	head->func = func;
+	head->next = NULL;
+	local_irq_save(flags);
+	rdp = RCU_DATA_ME();
+	spin_lock(&rdp->lock);
+	*rdp->nextschedtail = head;
+	rdp->nextschedtail = &head->next;
+	if (rdp->rcu_sched_sleeping) {
+
+		/* Grace-period processing might be sleeping... */
+
+		rdp->rcu_sched_sleeping = 0;
+		wake_gp = 1;
+	}
+	spin_unlock_irqrestore(&rdp->lock, flags);
+	if (wake_gp) {
+
+		/* Wake up grace-period processing, unless someone beat us. */
+
+		spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags);
+		if (rcu_ctrlblk.sched_sleep != rcu_sched_sleeping)
+			wake_gp = 0;
+		rcu_ctrlblk.sched_sleep = rcu_sched_not_sleeping;
+		spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags);
+		if (wake_gp)
+			wake_up_interruptible(&rcu_ctrlblk.sched_wq);
+	}
+}
+EXPORT_SYMBOL_GPL(call_rcu_sched);
+
 /*
  * Wait until all currently running preempt_disable() code segments
  * (including hardware-irq-disable segments) complete.  Note that
  * in -rt this does -not- necessarily result in all currently executing
  * interrupt -handlers- having completed.
  */
-void __synchronize_sched(void)
+synchronize_rcu_xxx(__synchronize_sched, call_rcu_sched)
+EXPORT_SYMBOL_GPL(__synchronize_sched);
+
+/*
+ * kthread function that manages call_rcu_sched grace periods.
+ */
+static int rcu_sched_grace_period(void *arg)
 {
-	cpumask_t oldmask;
+	int couldsleep;		/* might sleep after current pass. */
+	int couldsleepnext = 0; /* might sleep after next pass. */
 	int cpu;
+	unsigned long flags;
+	struct rcu_data *rdp;
+	int ret;
 
-	if (sched_getaffinity(0, &oldmask) < 0)
-		oldmask = cpu_possible_map;
-	for_each_online_cpu(cpu) {
-		sched_setaffinity(0, &cpumask_of_cpu(cpu));
-		schedule();
-	}
-	sched_setaffinity(0, &oldmask);
+	/*
+	 * Each pass through the following loop handles one
+	 * rcu_sched grace period cycle.
+	 */
+	do {
+		/* Save each CPU's current state. */
+
+		for_each_online_cpu(cpu) {
+			dyntick_save_progress_counter_sched(cpu);
+			save_qsctr_sched(cpu);
+		}
+
+		/*
+		 * Sleep for about an RCU grace-period's worth to
+		 * allow better batching and to consume less CPU.
+		 */
+		schedule_timeout_interruptible(RCU_SCHED_BATCH_TIME);
+
+		/*
+		 * If there was nothing to do last time, prepare to
+		 * sleep at the end of the current grace period cycle.
+		 */
+		couldsleep = couldsleepnext;
+		couldsleepnext = 1;
+		if (couldsleep) {
+			spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags);
+			rcu_ctrlblk.sched_sleep = rcu_sched_sleep_prep;
+			spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags);
+		}
+
+		/*
+		 * Wait on each CPU in turn to have either visited
+		 * a quiescent state or been in dynticks-idle mode.
+		 */
+		for_each_online_cpu(cpu) {
+			while (rcu_qsctr_inc_needed(cpu) &&
+			       rcu_qsctr_inc_needed_dyntick(cpu)) {
+				/* resched_cpu(cpu); @@@ */
+				schedule_timeout_interruptible(1);
+			}
+		}
+
+		/* Advance callbacks for each CPU.  */
+
+		for_each_online_cpu(cpu) {
+
+			rdp = RCU_DATA_CPU(cpu);
+			spin_lock_irqsave(&rdp->lock, flags);
+
+			/*
+			 * We are running on this CPU irq-disabled, so no
+			 * CPU can go offline until we re-enable irqs.
+			 * The current CPU might have already gone
+			 * offline (between the for_each_offline_cpu and
+			 * the spin_lock_irqsave), but in that case all its
+			 * callback lists will be empty, so no harm done.
+			 *
+			 * Advance the callbacks!  We share normal RCU's
+			 * donelist, since callbacks are invoked the
+			 * same way in either case.
+			 */
+			if (rdp->waitschedlist != NULL) {
+				*rdp->donetail = rdp->waitschedlist;
+				rdp->donetail = rdp->waitschedtail;
+
+				/*
+				 * Next rcu_check_callbacks() will
+				 * do the required raise_softirq().
+				 */
+			}
+			if (rdp->nextschedlist != NULL) {
+				rdp->waitschedlist = rdp->nextschedlist;
+				rdp->waitschedtail = rdp->nextschedtail;
+				couldsleep = 0;
+				couldsleepnext = 0;
+			} else {
+				rdp->waitschedlist = NULL;
+				rdp->waitschedtail = &rdp->waitschedlist;
+			}
+			rdp->nextschedlist = NULL;
+			rdp->nextschedtail = &rdp->nextschedlist;
+
+			/* Mark sleep intention. */
+
+			rdp->rcu_sched_sleeping = couldsleep;
+
+			spin_unlock_irqrestore(&rdp->lock, flags);
+		}
+
+		/* If we saw callbacks on the last scan, go deal with them. */
+
+		if (!couldsleep)
+			continue;
+
+		/* Attempt to block... */
+
+		spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags);
+		if (rcu_ctrlblk.sched_sleep != rcu_sched_sleep_prep) {
+
+			/*
+			 * Someone posted a callback after we scanned.
+			 * Go take care of it.
+			 */
+			spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags);
+			couldsleepnext = 0;
+			continue;
+		}
+
+		/* Block until the next person posts a callback. */
+
+		rcu_ctrlblk.sched_sleep = rcu_sched_sleeping;
+		spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags);
+		ret = 0;
+		__wait_event_interruptible(rcu_ctrlblk.sched_wq,
+			rcu_ctrlblk.sched_sleep != rcu_sched_sleeping,
+			ret);
+
+		/*
+		 * Signals would prevent us from sleeping, and we cannot
+		 * do much with them in any case.  So flush them.
+		 */
+		if (ret)
+			flush_signals(current);
+		couldsleepnext = 0;
+
+	} while (!kthread_should_stop());
+
+	return (0);
 }
-EXPORT_SYMBOL_GPL(__synchronize_sched);
 
 /*
  * Check to see if any future RCU-related work will need to be done
@@ -1027,7 +1340,9 @@ int rcu_needs_cpu(int cpu)
 
 	return (rdp->donelist != NULL ||
 		!!rdp->waitlistcount ||
-		rdp->nextlist != NULL);
+		rdp->nextlist != NULL ||
+		rdp->nextschedlist != NULL ||
+		rdp->waitschedlist != NULL);
 }
 
 int rcu_pending(int cpu)
@@ -1038,7 +1353,9 @@ int rcu_pending(int cpu)
 
 	if (rdp->donelist != NULL ||
 	    !!rdp->waitlistcount ||
-	    rdp->nextlist != NULL)
+	    rdp->nextlist != NULL ||
+	    rdp->nextschedlist != NULL ||
+	    rdp->waitschedlist != NULL)
 		return 1;
 
 	/* The RCU core needs an acknowledgement from this CPU. */
@@ -1105,6 +1422,11 @@ void __init __rcu_init(void)
 		rdp->donetail = &rdp->donelist;
 		rdp->rcu_flipctr[0] = 0;
 		rdp->rcu_flipctr[1] = 0;
+		rdp->nextschedlist = NULL;
+		rdp->nextschedtail = &rdp->nextschedlist;
+		rdp->waitschedlist = NULL;
+		rdp->waitschedtail = &rdp->waitschedlist;
+		rdp->rcu_sched_sleeping = 0;
 	}
 	register_cpu_notifier(&rcu_nb);
 
@@ -1127,11 +1449,15 @@ void __init __rcu_init(void)
 }
 
 /*
- * Deprecated, use synchronize_rcu() or synchronize_sched() instead.
+ * Late-boot-time RCU initialization that must wait until after scheduler
+ * has been initialized.
  */
-void synchronize_kernel(void)
+void __init rcu_init_sched(void)
 {
-	synchronize_rcu();
+	rcu_sched_grace_period_task = kthread_run(rcu_sched_grace_period,
+						  NULL,
+						  "rcu_sched_grace_period");
+	WARN_ON(IS_ERR(rcu_sched_grace_period_task));
 }
 
 #ifdef CONFIG_RCU_TRACE