Merge git://git.infradead.org/users/dwmw2/libraid-2.6 into for-linus

22 files changed, 1734 insertions, 84 deletions

diff --git a/lib/Kconfig b/lib/Kconfig
index 5b916bc0fbae..fa9bf2c06199 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -7,6 +7,9 @@ config BINARY_PRINTF
 
 menu "Library routines"
 
+config RAID6_PQ
+	tristate
+
 config BITREVERSE
 	tristate
 
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e722e9d62221..79e0dff1cdcb 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -76,7 +76,6 @@ config UNUSED_SYMBOLS
 
 config DEBUG_FS
 	bool "Debug Filesystem"
-	depends on SYSFS
 	help
 	  debugfs is a virtual file system that kernel developers use to put
 	  debugging files into.  Enable this option to be able to read and
@@ -152,28 +151,33 @@ config DEBUG_SHIRQ
 	  Drivers ought to be able to handle interrupts coming in at those
 	  points; some don't and need to be caught.
 
-config DETECT_SOFTLOCKUP
-	bool "Detect Soft Lockups"
+config LOCKUP_DETECTOR
+	bool "Detect Hard and Soft Lockups"
 	depends on DEBUG_KERNEL && !S390
-	default y
 	help
-	  Say Y here to enable the kernel to detect "soft lockups",
-	  which are bugs that cause the kernel to loop in kernel
+	  Say Y here to enable the kernel to act as a watchdog to detect
+	  hard and soft lockups.
+
+	  Softlockups are bugs that cause the kernel to loop in kernel
 	  mode for more than 60 seconds, without giving other tasks a
-	  chance to run.
+	  chance to run.  The current stack trace is displayed upon
+	  detection and the system will stay locked up.
 
-	  When a soft-lockup is detected, the kernel will print the
-	  current stack trace (which you should report), but the
-	  system will stay locked up. This feature has negligible
-	  overhead.
+	  Hardlockups are bugs that cause the CPU to loop in kernel mode
+	  for more than 60 seconds, without letting other interrupts have a
+	  chance to run.  The current stack trace is displayed upon detection
+	  and the system will stay locked up.
 
-	  (Note that "hard lockups" are separate type of bugs that
-	   can be detected via the NMI-watchdog, on platforms that
-	   support it.)
+	  The overhead should be minimal.  A periodic hrtimer runs to
+	  generate interrupts and kick the watchdog task every 10-12 seconds.
+	  An NMI is generated every 60 seconds or so to check for hardlockups.
+
+config HARDLOCKUP_DETECTOR
+	def_bool LOCKUP_DETECTOR && PERF_EVENTS && HAVE_PERF_EVENTS_NMI
 
 config BOOTPARAM_SOFTLOCKUP_PANIC
 	bool "Panic (Reboot) On Soft Lockups"
-	depends on DETECT_SOFTLOCKUP
+	depends on LOCKUP_DETECTOR
 	help
 	  Say Y here to enable the kernel to panic on "soft lockups",
 	  which are bugs that cause the kernel to loop in kernel
@@ -190,7 +194,7 @@ config BOOTPARAM_SOFTLOCKUP_PANIC
 
 config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE
 	int
-	depends on DETECT_SOFTLOCKUP
+	depends on LOCKUP_DETECTOR
 	range 0 1
 	default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC
 	default 1 if BOOTPARAM_SOFTLOCKUP_PANIC
@@ -307,6 +311,12 @@ config DEBUG_OBJECTS_WORK
 	  work queue routines to track the life time of work objects and
 	  validate the work operations.
 
+config DEBUG_OBJECTS_RCU_HEAD
+	bool "Debug RCU callbacks objects"
+	depends on DEBUG_OBJECTS && PREEMPT
+	help
+	  Enable this to turn on debugging of RCU list heads (call_rcu() usage).
+
 config DEBUG_OBJECTS_ENABLE_DEFAULT
 	int "debug_objects bootup default value (0-1)"
         range 0 1
@@ -528,7 +538,7 @@ config LOCKDEP
 	bool
 	depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
 	select STACKTRACE
-	select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390
+	select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE
 	select KALLSYMS
 	select KALLSYMS_ALL
 
@@ -628,6 +638,19 @@ config DEBUG_INFO
 
 	  If unsure, say N.
 
+config DEBUG_INFO_REDUCED
+	bool "Reduce debugging information"
+	depends on DEBUG_INFO
+	help
+	  If you say Y here gcc is instructed to generate less debugging
+	  information for structure types. This means that tools that
+	  need full debugging information (like kgdb or systemtap) won't
+	  be happy. But if you merely need debugging information to
+	  resolve line numbers there is no loss. Advantage is that
+	  build directory object sizes shrink dramatically over a full
+	  DEBUG_INFO build and compile times are reduced too.
+	  Only works with newer gcc versions.
+
 config DEBUG_VM
 	bool "Debug VM"
 	depends on DEBUG_KERNEL
@@ -937,7 +960,7 @@ config FAIL_MAKE_REQUEST
 	  Provide fault-injection capability for disk IO.
 
 config FAIL_IO_TIMEOUT
-	bool "Faul-injection capability for faking disk interrupts"
+	bool "Fault-injection capability for faking disk interrupts"
 	depends on FAULT_INJECTION && BLOCK
 	help
 	  Provide fault-injection capability on end IO handling. This
@@ -958,13 +981,13 @@ config FAULT_INJECTION_STACKTRACE_FILTER
 	depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
 	depends on !X86_64
 	select STACKTRACE
-	select FRAME_POINTER if !PPC && !S390
+	select FRAME_POINTER if !PPC && !S390 && !MICROBLAZE
 	help
 	  Provide stacktrace filter for fault-injection capabilities
 
 config LATENCYTOP
 	bool "Latency measuring infrastructure"
-	select FRAME_POINTER if !MIPS && !PPC && !S390
+	select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE
 	select KALLSYMS
 	select KALLSYMS_ALL
 	select STACKTRACE
diff --git a/lib/Makefile b/lib/Makefile
index 0bfabba1bb32..e6a3763b8212 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
 obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
 obj-$(CONFIG_LZO_COMPRESS) += lzo/
 obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
+obj-$(CONFIG_RAID6_PQ) += raid6/
 
 lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
 lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
diff --git a/lib/atomic64_test.c b/lib/atomic64_test.c
index 250ed11d3ed2..44524cc8c32a 100644
--- a/lib/atomic64_test.c
+++ b/lib/atomic64_test.c
@@ -114,7 +114,7 @@ static __init int test_atomic64(void)
 	BUG_ON(v.counter != r);
 
 #if defined(CONFIG_X86) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \
-    defined(CONFIG_S390) || defined(_ASM_GENERIC_ATOMIC64_H)
+    defined(CONFIG_S390) || defined(_ASM_GENERIC_ATOMIC64_H) || defined(CONFIG_ARM)
 	INIT(onestwos);
 	BUG_ON(atomic64_dec_if_positive(&v) != (onestwos - 1));
 	r -= one;
diff --git a/lib/devres.c b/lib/devres.c
index 49368608f988..6efddf53b90c 100644
--- a/lib/devres.c
+++ b/lib/devres.c
@@ -328,7 +328,7 @@ EXPORT_SYMBOL(pcim_iomap_regions_request_all);
  * @pdev: PCI device to map IO resources for
  * @mask: Mask of BARs to unmap and release
  *
- * Unamp and release regions specified by @mask.
+ * Unmap and release regions specified by @mask.
  */
 void pcim_iounmap_regions(struct pci_dev *pdev, u16 mask)
 {
diff --git a/lib/ioremap.c b/lib/ioremap.c
index 14c6078f17a2..5730ecd3eb66 100644
--- a/lib/ioremap.c
+++ b/lib/ioremap.c
@@ -13,10 +13,10 @@
 #include <asm/pgtable.h>
 
 static int ioremap_pte_range(pmd_t *pmd, unsigned long addr,
-		unsigned long end, unsigned long phys_addr, pgprot_t prot)
+		unsigned long end, phys_addr_t phys_addr, pgprot_t prot)
 {
 	pte_t *pte;
-	unsigned long pfn;
+	u64 pfn;
 
 	pfn = phys_addr >> PAGE_SHIFT;
 	pte = pte_alloc_kernel(pmd, addr);
@@ -31,7 +31,7 @@ static int ioremap_pte_range(pmd_t *pmd, unsigned long addr,
 }
 
 static inline int ioremap_pmd_range(pud_t *pud, unsigned long addr,
-		unsigned long end, unsigned long phys_addr, pgprot_t prot)
+		unsigned long end, phys_addr_t phys_addr, pgprot_t prot)
 {
 	pmd_t *pmd;
 	unsigned long next;
@@ -49,7 +49,7 @@ static inline int ioremap_pmd_range(pud_t *pud, unsigned long addr,
 }
 
 static inline int ioremap_pud_range(pgd_t *pgd, unsigned long addr,
-		unsigned long end, unsigned long phys_addr, pgprot_t prot)
+		unsigned long end, phys_addr_t phys_addr, pgprot_t prot)
 {
 	pud_t *pud;
 	unsigned long next;
@@ -67,7 +67,7 @@ static inline int ioremap_pud_range(pgd_t *pgd, unsigned long addr,
 }
 
 int ioremap_page_range(unsigned long addr,
-		       unsigned long end, unsigned long phys_addr, pgprot_t prot)
+		       unsigned long end, phys_addr_t phys_addr, pgprot_t prot)
 {
 	pgd_t *pgd;
 	unsigned long start;
diff --git a/lib/raid6/Makefile b/lib/raid6/Makefile
new file mode 100644
index 000000000000..19bf32da644f
--- /dev/null
+++ b/lib/raid6/Makefile
@@ -0,0 +1,78 @@
+obj-$(CONFIG_RAID6_PQ)	+= raid6_pq.o
+
+raid6_pq-y	+= raid6algos.o raid6recov.o raid6tables.o \
+		   raid6int1.o raid6int2.o raid6int4.o \
+		   raid6int8.o raid6int16.o raid6int32.o \
+		   raid6altivec1.o raid6altivec2.o raid6altivec4.o \
+		   raid6altivec8.o \
+		   raid6mmx.o raid6sse1.o raid6sse2.o
+hostprogs-y	+= mktables
+
+quiet_cmd_unroll = UNROLL  $@
+      cmd_unroll = $(AWK) -f$(srctree)/$(src)/unroll.awk -vN=$(UNROLL) \
+                   < $< > $@ || ( rm -f $@ && exit 1 )
+
+ifeq ($(CONFIG_ALTIVEC),y)
+altivec_flags := -maltivec -mabi=altivec
+endif
+
+targets += raid6int1.c
+$(obj)/raid6int1.c:   UNROLL := 1
+$(obj)/raid6int1.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+targets += raid6int2.c
+$(obj)/raid6int2.c:   UNROLL := 2
+$(obj)/raid6int2.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+targets += raid6int4.c
+$(obj)/raid6int4.c:   UNROLL := 4
+$(obj)/raid6int4.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+targets += raid6int8.c
+$(obj)/raid6int8.c:   UNROLL := 8
+$(obj)/raid6int8.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+targets += raid6int16.c
+$(obj)/raid6int16.c:  UNROLL := 16
+$(obj)/raid6int16.c:  $(src)/raid6int.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+targets += raid6int32.c
+$(obj)/raid6int32.c:  UNROLL := 32
+$(obj)/raid6int32.c:  $(src)/raid6int.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+CFLAGS_raid6altivec1.o += $(altivec_flags)
+targets += raid6altivec1.c
+$(obj)/raid6altivec1.c:   UNROLL := 1
+$(obj)/raid6altivec1.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+CFLAGS_raid6altivec2.o += $(altivec_flags)
+targets += raid6altivec2.c
+$(obj)/raid6altivec2.c:   UNROLL := 2
+$(obj)/raid6altivec2.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+CFLAGS_raid6altivec4.o += $(altivec_flags)
+targets += raid6altivec4.c
+$(obj)/raid6altivec4.c:   UNROLL := 4
+$(obj)/raid6altivec4.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+CFLAGS_raid6altivec8.o += $(altivec_flags)
+targets += raid6altivec8.c
+$(obj)/raid6altivec8.c:   UNROLL := 8
+$(obj)/raid6altivec8.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+quiet_cmd_mktable = TABLE   $@
+      cmd_mktable = $(obj)/mktables > $@ || ( rm -f $@ && exit 1 )
+
+targets += raid6tables.c
+$(obj)/raid6tables.c: $(obj)/mktables FORCE
+	$(call if_changed,mktable)
diff --git a/lib/raid6/mktables.c b/lib/raid6/mktables.c
new file mode 100644
index 000000000000..3b1500843bba
--- /dev/null
+++ b/lib/raid6/mktables.c
@@ -0,0 +1,132 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright 2002-2007 H. Peter Anvin - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2 or (at your
+ *   option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * mktables.c
+ *
+ * Make RAID-6 tables.  This is a host user space program to be run at
+ * compile time.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include <stdlib.h>
+#include <time.h>
+
+static uint8_t gfmul(uint8_t a, uint8_t b)
+{
+	uint8_t v = 0;
+
+	while (b) {
+		if (b & 1)
+			v ^= a;
+		a = (a << 1) ^ (a & 0x80 ? 0x1d : 0);
+		b >>= 1;
+	}
+
+	return v;
+}
+
+static uint8_t gfpow(uint8_t a, int b)
+{
+	uint8_t v = 1;
+
+	b %= 255;
+	if (b < 0)
+		b += 255;
+
+	while (b) {
+		if (b & 1)
+			v = gfmul(v, a);
+		a = gfmul(a, a);
+		b >>= 1;
+	}
+
+	return v;
+}
+
+int main(int argc, char *argv[])
+{
+	int i, j, k;
+	uint8_t v;
+	uint8_t exptbl[256], invtbl[256];
+
+	printf("#include <linux/raid/pq.h>\n");
+
+	/* Compute multiplication table */
+	printf("\nconst u8  __attribute__((aligned(256)))\n"
+		"raid6_gfmul[256][256] =\n"
+		"{\n");
+	for (i = 0; i < 256; i++) {
+		printf("\t{\n");
+		for (j = 0; j < 256; j += 8) {
+			printf("\t\t");
+			for (k = 0; k < 8; k++)
+				printf("0x%02x,%c", gfmul(i, j + k),
+				       (k == 7) ? '\n' : ' ');
+		}
+		printf("\t},\n");
+	}
+	printf("};\n");
+	printf("#ifdef __KERNEL__\n");
+	printf("EXPORT_SYMBOL(raid6_gfmul);\n");
+	printf("#endif\n");
+
+	/* Compute power-of-2 table (exponent) */
+	v = 1;
+	printf("\nconst u8 __attribute__((aligned(256)))\n"
+	       "raid6_gfexp[256] =\n" "{\n");
+	for (i = 0; i < 256; i += 8) {
+		printf("\t");
+		for (j = 0; j < 8; j++) {
+			exptbl[i + j] = v;
+			printf("0x%02x,%c", v, (j == 7) ? '\n' : ' ');
+			v = gfmul(v, 2);
+			if (v == 1)
+				v = 0;	/* For entry 255, not a real entry */
+		}
+	}
+	printf("};\n");
+	printf("#ifdef __KERNEL__\n");
+	printf("EXPORT_SYMBOL(raid6_gfexp);\n");
+	printf("#endif\n");
+
+	/* Compute inverse table x^-1 == x^254 */
+	printf("\nconst u8 __attribute__((aligned(256)))\n"
+	       "raid6_gfinv[256] =\n" "{\n");
+	for (i = 0; i < 256; i += 8) {
+		printf("\t");
+		for (j = 0; j < 8; j++) {
+			invtbl[i + j] = v = gfpow(i + j, 254);
+			printf("0x%02x,%c", v, (j == 7) ? '\n' : ' ');
+		}
+	}
+	printf("};\n");
+	printf("#ifdef __KERNEL__\n");
+	printf("EXPORT_SYMBOL(raid6_gfinv);\n");
+	printf("#endif\n");
+
+	/* Compute inv(2^x + 1) (exponent-xor-inverse) table */
+	printf("\nconst u8 __attribute__((aligned(256)))\n"
+	       "raid6_gfexi[256] =\n" "{\n");
+	for (i = 0; i < 256; i += 8) {
+		printf("\t");
+		for (j = 0; j < 8; j++)
+			printf("0x%02x,%c", invtbl[exptbl[i + j] ^ 1],
+			       (j == 7) ? '\n' : ' ');
+	}
+	printf("};\n");
+	printf("#ifdef __KERNEL__\n");
+	printf("EXPORT_SYMBOL(raid6_gfexi);\n");
+	printf("#endif\n");
+
+	return 0;
+}
diff --git a/lib/raid6/raid6algos.c b/lib/raid6/raid6algos.c
new file mode 100644
index 000000000000..1f8784bfd44d
--- /dev/null
+++ b/lib/raid6/raid6algos.c
@@ -0,0 +1,154 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright 2002 H. Peter Anvin - All Rights Reserved
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ *   Boston MA 02111-1307, USA; either version 2 of the License, or
+ *   (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6algos.c
+ *
+ * Algorithm list and algorithm selection for RAID-6
+ */
+
+#include <linux/raid/pq.h>
+#include <linux/gfp.h>
+#ifndef __KERNEL__
+#include <sys/mman.h>
+#include <stdio.h>
+#else
+#if !RAID6_USE_EMPTY_ZERO_PAGE
+/* In .bss so it's zeroed */
+const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
+EXPORT_SYMBOL(raid6_empty_zero_page);
+#endif
+#endif
+
+struct raid6_calls raid6_call;
+EXPORT_SYMBOL_GPL(raid6_call);
+
+const struct raid6_calls * const raid6_algos[] = {
+	&raid6_intx1,
+	&raid6_intx2,
+	&raid6_intx4,
+	&raid6_intx8,
+#if defined(__ia64__)
+	&raid6_intx16,
+	&raid6_intx32,
+#endif
+#if defined(__i386__) && !defined(__arch_um__)
+	&raid6_mmxx1,
+	&raid6_mmxx2,
+	&raid6_sse1x1,
+	&raid6_sse1x2,
+	&raid6_sse2x1,
+	&raid6_sse2x2,
+#endif
+#if defined(__x86_64__) && !defined(__arch_um__)
+	&raid6_sse2x1,
+	&raid6_sse2x2,
+	&raid6_sse2x4,
+#endif
+#ifdef CONFIG_ALTIVEC
+	&raid6_altivec1,
+	&raid6_altivec2,
+	&raid6_altivec4,
+	&raid6_altivec8,
+#endif
+	NULL
+};
+
+#ifdef __KERNEL__
+#define RAID6_TIME_JIFFIES_LG2	4
+#else
+/* Need more time to be stable in userspace */
+#define RAID6_TIME_JIFFIES_LG2	9
+#define time_before(x, y) ((x) < (y))
+#endif
+
+/* Try to pick the best algorithm */
+/* This code uses the gfmul table as convenient data set to abuse */
+
+int __init raid6_select_algo(void)
+{
+	const struct raid6_calls * const * algo;
+	const struct raid6_calls * best;
+	char *syndromes;
+	void *dptrs[(65536/PAGE_SIZE)+2];
+	int i, disks;
+	unsigned long perf, bestperf;
+	int bestprefer;
+	unsigned long j0, j1;
+
+	disks = (65536/PAGE_SIZE)+2;
+	for ( i = 0 ; i < disks-2 ; i++ ) {
+		dptrs[i] = ((char *)raid6_gfmul) + PAGE_SIZE*i;
+	}
+
+	/* Normal code - use a 2-page allocation to avoid D$ conflict */
+	syndromes = (void *) __get_free_pages(GFP_KERNEL, 1);
+
+	if ( !syndromes ) {
+		printk("raid6: Yikes!  No memory available.\n");
+		return -ENOMEM;
+	}
+
+	dptrs[disks-2] = syndromes;
+	dptrs[disks-1] = syndromes + PAGE_SIZE;
+
+	bestperf = 0;  bestprefer = 0;  best = NULL;
+
+	for ( algo = raid6_algos ; *algo ; algo++ ) {
+		if ( !(*algo)->valid || (*algo)->valid() ) {
+			perf = 0;
+
+			preempt_disable();
+			j0 = jiffies;
+			while ( (j1 = jiffies) == j0 )
+				cpu_relax();
+			while (time_before(jiffies,
+					    j1 + (1<<RAID6_TIME_JIFFIES_LG2))) {
+				(*algo)->gen_syndrome(disks, PAGE_SIZE, dptrs);
+				perf++;
+			}
+			preempt_enable();
+
+			if ( (*algo)->prefer > bestprefer ||
+			     ((*algo)->prefer == bestprefer &&
+			      perf > bestperf) ) {
+				best = *algo;
+				bestprefer = best->prefer;
+				bestperf = perf;
+			}
+			printk("raid6: %-8s %5ld MB/s\n", (*algo)->name,
+			       (perf*HZ) >> (20-16+RAID6_TIME_JIFFIES_LG2));
+		}
+	}
+
+	if (best) {
+		printk("raid6: using algorithm %s (%ld MB/s)\n",
+		       best->name,
+		       (bestperf*HZ) >> (20-16+RAID6_TIME_JIFFIES_LG2));
+		raid6_call = *best;
+	} else
+		printk("raid6: Yikes!  No algorithm found!\n");
+
+	free_pages((unsigned long)syndromes, 1);
+
+	return best ? 0 : -EINVAL;
+}
+
+static void raid6_exit(void)
+{
+	do { } while (0);
+}
+
+subsys_initcall(raid6_select_algo);
+module_exit(raid6_exit);
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("RAID6 Q-syndrome calculations");
diff --git a/lib/raid6/raid6altivec.uc b/lib/raid6/raid6altivec.uc
new file mode 100644
index 000000000000..2654d5c854be
--- /dev/null
+++ b/lib/raid6/raid6altivec.uc
@@ -0,0 +1,130 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright 2002-2004 H. Peter Anvin - All Rights Reserved
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ *   Boston MA 02111-1307, USA; either version 2 of the License, or
+ *   (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6altivec$#.c
+ *
+ * $#-way unrolled portable integer math RAID-6 instruction set
+ *
+ * This file is postprocessed using unroll.awk
+ *
+ * <benh> hpa: in process,
+ * you can just "steal" the vec unit with enable_kernel_altivec() (but
+ * bracked this with preempt_disable/enable or in a lock)
+ */
+
+#include <linux/raid/pq.h>
+
+#ifdef CONFIG_ALTIVEC
+
+#include <altivec.h>
+#ifdef __KERNEL__
+# include <asm/system.h>
+# include <asm/cputable.h>
+#endif
+
+/*
+ * This is the C data type to use.  We use a vector of
+ * signed char so vec_cmpgt() will generate the right
+ * instruction.
+ */
+
+typedef vector signed char unative_t;
+
+#define NBYTES(x) ((vector signed char) {x,x,x,x, x,x,x,x, x,x,x,x, x,x,x,x})
+#define NSIZE	sizeof(unative_t)
+
+/*
+ * The SHLBYTE() operation shifts each byte left by 1, *not*
+ * rolling over into the next byte
+ */
+static inline __attribute_const__ unative_t SHLBYTE(unative_t v)
+{
+	return vec_add(v,v);
+}
+
+/*
+ * The MASK() operation returns 0xFF in any byte for which the high
+ * bit is 1, 0x00 for any byte for which the high bit is 0.
+ */
+static inline __attribute_const__ unative_t MASK(unative_t v)
+{
+	unative_t zv = NBYTES(0);
+
+	/* vec_cmpgt returns a vector bool char; thus the need for the cast */
+	return (unative_t)vec_cmpgt(zv, v);
+}
+
+
+/* This is noinline to make damned sure that gcc doesn't move any of the
+   Altivec code around the enable/disable code */
+static void noinline
+raid6_altivec$#_gen_syndrome_real(int disks, size_t bytes, void **ptrs)
+{
+	u8 **dptr = (u8 **)ptrs;
+	u8 *p, *q;
+	int d, z, z0;
+
+	unative_t wd$$, wq$$, wp$$, w1$$, w2$$;
+	unative_t x1d = NBYTES(0x1d);
+
+	z0 = disks - 3;		/* Highest data disk */
+	p = dptr[z0+1];		/* XOR parity */
+	q = dptr[z0+2];		/* RS syndrome */
+
+	for ( d = 0 ; d < bytes ; d += NSIZE*$# ) {
+		wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE];
+		for ( z = z0-1 ; z >= 0 ; z-- ) {
+			wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE];
+			wp$$ = vec_xor(wp$$, wd$$);
+			w2$$ = MASK(wq$$);
+			w1$$ = SHLBYTE(wq$$);
+			w2$$ = vec_and(w2$$, x1d);
+			w1$$ = vec_xor(w1$$, w2$$);
+			wq$$ = vec_xor(w1$$, wd$$);
+		}
+		*(unative_t *)&p[d+NSIZE*$$] = wp$$;
+		*(unative_t *)&q[d+NSIZE*$$] = wq$$;
+	}
+}
+
+static void raid6_altivec$#_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+	preempt_disable();
+	enable_kernel_altivec();
+
+	raid6_altivec$#_gen_syndrome_real(disks, bytes, ptrs);
+
+	preempt_enable();
+}
+
+int raid6_have_altivec(void);
+#if $# == 1
+int raid6_have_altivec(void)
+{
+	/* This assumes either all CPUs have Altivec or none does */
+# ifdef __KERNEL__
+	return cpu_has_feature(CPU_FTR_ALTIVEC);
+# else
+	return 1;
+# endif
+}
+#endif
+
+const struct raid6_calls raid6_altivec$# = {
+	raid6_altivec$#_gen_syndrome,
+	raid6_have_altivec,
+	"altivecx$#",
+	0
+};
+
+#endif /* CONFIG_ALTIVEC */
diff --git a/lib/raid6/raid6int.uc b/lib/raid6/raid6int.uc
new file mode 100644
index 000000000000..d1e276a14fab
--- /dev/null
+++ b/lib/raid6/raid6int.uc
@@ -0,0 +1,117 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright 2002-2004 H. Peter Anvin - All Rights Reserved
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ *   Boston MA 02111-1307, USA; either version 2 of the License, or
+ *   (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6int$#.c
+ *
+ * $#-way unrolled portable integer math RAID-6 instruction set
+ *
+ * This file is postprocessed using unroll.awk
+ */
+
+#include <linux/raid/pq.h>
+
+/*
+ * This is the C data type to use
+ */
+
+/* Change this from BITS_PER_LONG if there is something better... */
+#if BITS_PER_LONG == 64
+# define NBYTES(x) ((x) * 0x0101010101010101UL)
+# define NSIZE  8
+# define NSHIFT 3
+# define NSTRING "64"
+typedef u64 unative_t;
+#else
+# define NBYTES(x) ((x) * 0x01010101U)
+# define NSIZE  4
+# define NSHIFT 2
+# define NSTRING "32"
+typedef u32 unative_t;
+#endif
+
+
+
+/*
+ * IA-64 wants insane amounts of unrolling.  On other architectures that
+ * is just a waste of space.
+ */
+#if ($# <= 8) || defined(__ia64__)
+
+
+/*
+ * These sub-operations are separate inlines since they can sometimes be
+ * specially optimized using architecture-specific hacks.
+ */
+
+/*
+ * The SHLBYTE() operation shifts each byte left by 1, *not*
+ * rolling over into the next byte
+ */
+static inline __attribute_const__ unative_t SHLBYTE(unative_t v)
+{
+	unative_t vv;
+
+	vv = (v << 1) & NBYTES(0xfe);
+	return vv;
+}
+
+/*
+ * The MASK() operation returns 0xFF in any byte for which the high
+ * bit is 1, 0x00 for any byte for which the high bit is 0.
+ */
+static inline __attribute_const__ unative_t MASK(unative_t v)
+{
+	unative_t vv;
+
+	vv = v & NBYTES(0x80);
+	vv = (vv << 1) - (vv >> 7); /* Overflow on the top bit is OK */
+	return vv;
+}
+
+
+static void raid6_int$#_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+	u8 **dptr = (u8 **)ptrs;
+	u8 *p, *q;
+	int d, z, z0;
+
+	unative_t wd$$, wq$$, wp$$, w1$$, w2$$;
+
+	z0 = disks - 3;		/* Highest data disk */
+	p = dptr[z0+1];		/* XOR parity */
+	q = dptr[z0+2];		/* RS syndrome */
+
+	for ( d = 0 ; d < bytes ; d += NSIZE*$# ) {
+		wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE];
+		for ( z = z0-1 ; z >= 0 ; z-- ) {
+			wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE];
+			wp$$ ^= wd$$;
+			w2$$ = MASK(wq$$);
+			w1$$ = SHLBYTE(wq$$);
+			w2$$ &= NBYTES(0x1d);
+			w1$$ ^= w2$$;
+			wq$$ = w1$$ ^ wd$$;
+		}
+		*(unative_t *)&p[d+NSIZE*$$] = wp$$;
+		*(unative_t *)&q[d+NSIZE*$$] = wq$$;
+	}
+}
+
+const struct raid6_calls raid6_intx$# = {
+	raid6_int$#_gen_syndrome,
+	NULL,		/* always valid */
+	"int" NSTRING "x$#",
+	0
+};
+
+#endif
diff --git a/lib/raid6/raid6mmx.c b/lib/raid6/raid6mmx.c
new file mode 100644
index 000000000000..e7f6c13132bf
--- /dev/null
+++ b/lib/raid6/raid6mmx.c
@@ -0,0 +1,142 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright 2002 H. Peter Anvin - All Rights Reserved
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ *   Boston MA 02111-1307, USA; either version 2 of the License, or
+ *   (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6mmx.c
+ *
+ * MMX implementation of RAID-6 syndrome functions
+ */
+
+#if defined(__i386__) && !defined(__arch_um__)
+
+#include <linux/raid/pq.h>
+#include "raid6x86.h"
+
+/* Shared with raid6sse1.c */
+const struct raid6_mmx_constants {
+	u64 x1d;
+} raid6_mmx_constants = {
+	0x1d1d1d1d1d1d1d1dULL,
+};
+
+static int raid6_have_mmx(void)
+{
+	/* Not really "boot_cpu" but "all_cpus" */
+	return boot_cpu_has(X86_FEATURE_MMX);
+}
+
+/*
+ * Plain MMX implementation
+ */
+static void raid6_mmx1_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+	u8 **dptr = (u8 **)ptrs;
+	u8 *p, *q;
+	int d, z, z0;
+
+	z0 = disks - 3;		/* Highest data disk */
+	p = dptr[z0+1];		/* XOR parity */
+	q = dptr[z0+2];		/* RS syndrome */
+
+	kernel_fpu_begin();
+
+	asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
+	asm volatile("pxor %mm5,%mm5");	/* Zero temp */
+
+	for ( d = 0 ; d < bytes ; d += 8 ) {
+		asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
+		asm volatile("movq %mm2,%mm4");	/* Q[0] */
+		for ( z = z0-1 ; z >= 0 ; z-- ) {
+			asm volatile("movq %0,%%mm6" : : "m" (dptr[z][d]));
+			asm volatile("pcmpgtb %mm4,%mm5");
+			asm volatile("paddb %mm4,%mm4");
+			asm volatile("pand %mm0,%mm5");
+			asm volatile("pxor %mm5,%mm4");
+			asm volatile("pxor %mm5,%mm5");
+			asm volatile("pxor %mm6,%mm2");
+			asm volatile("pxor %mm6,%mm4");
+		}
+		asm volatile("movq %%mm2,%0" : "=m" (p[d]));
+		asm volatile("pxor %mm2,%mm2");
+		asm volatile("movq %%mm4,%0" : "=m" (q[d]));
+		asm volatile("pxor %mm4,%mm4");
+	}
+
+	kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_mmxx1 = {
+	raid6_mmx1_gen_syndrome,
+	raid6_have_mmx,
+	"mmxx1",
+	0
+};
+
+/*
+ * Unrolled-by-2 MMX implementation
+ */
+static void raid6_mmx2_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+	u8 **dptr = (u8 **)ptrs;
+	u8 *p, *q;
+	int d, z, z0;
+
+	z0 = disks - 3;		/* Highest data disk */
+	p = dptr[z0+1];		/* XOR parity */
+	q = dptr[z0+2];		/* RS syndrome */
+
+	kernel_fpu_begin();
+
+	asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
+	asm volatile("pxor %mm5,%mm5");	/* Zero temp */
+	asm volatile("pxor %mm7,%mm7"); /* Zero temp */
+
+	for ( d = 0 ; d < bytes ; d += 16 ) {
+		asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
+		asm volatile("movq %0,%%mm3" : : "m" (dptr[z0][d+8]));
+		asm volatile("movq %mm2,%mm4"); /* Q[0] */
+		asm volatile("movq %mm3,%mm6"); /* Q[1] */
+		for ( z = z0-1 ; z >= 0 ; z-- ) {
+			asm volatile("pcmpgtb %mm4,%mm5");
+			asm volatile("pcmpgtb %mm6,%mm7");
+			asm volatile("paddb %mm4,%mm4");
+			asm volatile("paddb %mm6,%mm6");
+			asm volatile("pand %mm0,%mm5");
+			asm volatile("pand %mm0,%mm7");
+			asm volatile("pxor %mm5,%mm4");
+			asm volatile("pxor %mm7,%mm6");
+			asm volatile("movq %0,%%mm5" : : "m" (dptr[z][d]));
+			asm volatile("movq %0,%%mm7" : : "m" (dptr[z][d+8]));
+			asm volatile("pxor %mm5,%mm2");
+			asm volatile("pxor %mm7,%mm3");
+			asm volatile("pxor %mm5,%mm4");
+			asm volatile("pxor %mm7,%mm6");
+			asm volatile("pxor %mm5,%mm5");
+			asm volatile("pxor %mm7,%mm7");
+		}
+		asm volatile("movq %%mm2,%0" : "=m" (p[d]));
+		asm volatile("movq %%mm3,%0" : "=m" (p[d+8]));
+		asm volatile("movq %%mm4,%0" : "=m" (q[d]));
+		asm volatile("movq %%mm6,%0" : "=m" (q[d+8]));
+	}
+
+	kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_mmxx2 = {
+	raid6_mmx2_gen_syndrome,
+	raid6_have_mmx,
+	"mmxx2",
+	0
+};
+
+#endif
diff --git a/lib/raid6/raid6recov.c b/lib/raid6/raid6recov.c
new file mode 100644
index 000000000000..2609f00e0d61
--- /dev/null
+++ b/lib/raid6/raid6recov.c
@@ -0,0 +1,132 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright 2002 H. Peter Anvin - All Rights Reserved
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ *   Boston MA 02111-1307, USA; either version 2 of the License, or
+ *   (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6recov.c
+ *
+ * RAID-6 data recovery in dual failure mode.  In single failure mode,
+ * use the RAID-5 algorithm (or, in the case of Q failure, just reconstruct
+ * the syndrome.)
+ */
+
+#include <linux/raid/pq.h>
+
+/* Recover two failed data blocks. */
+void raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
+		       void **ptrs)
+{
+	u8 *p, *q, *dp, *dq;
+	u8 px, qx, db;
+	const u8 *pbmul;	/* P multiplier table for B data */
+	const u8 *qmul;		/* Q multiplier table (for both) */
+
+	p = (u8 *)ptrs[disks-2];
+	q = (u8 *)ptrs[disks-1];
+
+	/* Compute syndrome with zero for the missing data pages
+	   Use the dead data pages as temporary storage for
+	   delta p and delta q */
+	dp = (u8 *)ptrs[faila];
+	ptrs[faila] = (void *)raid6_empty_zero_page;
+	ptrs[disks-2] = dp;
+	dq = (u8 *)ptrs[failb];
+	ptrs[failb] = (void *)raid6_empty_zero_page;
+	ptrs[disks-1] = dq;
+
+	raid6_call.gen_syndrome(disks, bytes, ptrs);
+
+	/* Restore pointer table */
+	ptrs[faila]   = dp;
+	ptrs[failb]   = dq;
+	ptrs[disks-2] = p;
+	ptrs[disks-1] = q;
+
+	/* Now, pick the proper data tables */
+	pbmul = raid6_gfmul[raid6_gfexi[failb-faila]];
+	qmul  = raid6_gfmul[raid6_gfinv[raid6_gfexp[faila]^raid6_gfexp[failb]]];
+
+	/* Now do it... */
+	while ( bytes-- ) {
+		px    = *p ^ *dp;
+		qx    = qmul[*q ^ *dq];
+		*dq++ = db = pbmul[px] ^ qx; /* Reconstructed B */
+		*dp++ = db ^ px; /* Reconstructed A */
+		p++; q++;
+	}
+}
+EXPORT_SYMBOL_GPL(raid6_2data_recov);
+
+/* Recover failure of one data block plus the P block */
+void raid6_datap_recov(int disks, size_t bytes, int faila, void **ptrs)
+{
+	u8 *p, *q, *dq;
+	const u8 *qmul;		/* Q multiplier table */
+
+	p = (u8 *)ptrs[disks-2];
+	q = (u8 *)ptrs[disks-1];
+
+	/* Compute syndrome with zero for the missing data page
+	   Use the dead data page as temporary storage for delta q */
+	dq = (u8 *)ptrs[faila];
+	ptrs[faila] = (void *)raid6_empty_zero_page;
+	ptrs[disks-1] = dq;
+
+	raid6_call.gen_syndrome(disks, bytes, ptrs);
+
+	/* Restore pointer table */
+	ptrs[faila]   = dq;
+	ptrs[disks-1] = q;
+
+	/* Now, pick the proper data tables */
+	qmul  = raid6_gfmul[raid6_gfinv[raid6_gfexp[faila]]];
+
+	/* Now do it... */
+	while ( bytes-- ) {
+		*p++ ^= *dq = qmul[*q ^ *dq];
+		q++; dq++;
+	}
+}
+EXPORT_SYMBOL_GPL(raid6_datap_recov);
+
+#ifndef __KERNEL__
+/* Testing only */
+
+/* Recover two failed blocks. */
+void raid6_dual_recov(int disks, size_t bytes, int faila, int failb, void **ptrs)
+{
+	if ( faila > failb ) {
+		int tmp = faila;
+		faila = failb;
+		failb = tmp;
+	}
+
+	if ( failb == disks-1 ) {
+		if ( faila == disks-2 ) {
+			/* P+Q failure.  Just rebuild the syndrome. */
+			raid6_call.gen_syndrome(disks, bytes, ptrs);
+		} else {
+			/* data+Q failure.  Reconstruct data from P,
+			   then rebuild syndrome. */
+			/* NOT IMPLEMENTED - equivalent to RAID-5 */
+		}
+	} else {
+		if ( failb == disks-2 ) {
+			/* data+P failure. */
+			raid6_datap_recov(disks, bytes, faila, ptrs);
+		} else {
+			/* data+data failure. */
+			raid6_2data_recov(disks, bytes, faila, failb, ptrs);
+		}
+	}
+}
+
+#endif
diff --git a/lib/raid6/raid6sse1.c b/lib/raid6/raid6sse1.c
new file mode 100644
index 000000000000..b274dd5eab8f
--- /dev/null
+++ b/lib/raid6/raid6sse1.c
@@ -0,0 +1,162 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright 2002 H. Peter Anvin - All Rights Reserved
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ *   Boston MA 02111-1307, USA; either version 2 of the License, or
+ *   (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6sse1.c
+ *
+ * SSE-1/MMXEXT implementation of RAID-6 syndrome functions
+ *
+ * This is really an MMX implementation, but it requires SSE-1 or
+ * AMD MMXEXT for prefetch support and a few other features.  The
+ * support for nontemporal memory accesses is enough to make this
+ * worthwhile as a separate implementation.
+ */
+
+#if defined(__i386__) && !defined(__arch_um__)
+
+#include <linux/raid/pq.h>
+#include "raid6x86.h"
+
+/* Defined in raid6mmx.c */
+extern const struct raid6_mmx_constants {
+	u64 x1d;
+} raid6_mmx_constants;
+
+static int raid6_have_sse1_or_mmxext(void)
+{
+	/* Not really boot_cpu but "all_cpus" */
+	return boot_cpu_has(X86_FEATURE_MMX) &&
+		(boot_cpu_has(X86_FEATURE_XMM) ||
+		 boot_cpu_has(X86_FEATURE_MMXEXT));
+}
+
+/*
+ * Plain SSE1 implementation
+ */
+static void raid6_sse11_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+	u8 **dptr = (u8 **)ptrs;
+	u8 *p, *q;
+	int d, z, z0;
+
+	z0 = disks - 3;		/* Highest data disk */
+	p = dptr[z0+1];		/* XOR parity */
+	q = dptr[z0+2];		/* RS syndrome */
+
+	kernel_fpu_begin();
+
+	asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
+	asm volatile("pxor %mm5,%mm5");	/* Zero temp */
+
+	for ( d = 0 ; d < bytes ; d += 8 ) {
+		asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
+		asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
+		asm volatile("prefetchnta %0" : : "m" (dptr[z0-1][d]));
+		asm volatile("movq %mm2,%mm4");	/* Q[0] */
+		asm volatile("movq %0,%%mm6" : : "m" (dptr[z0-1][d]));
+		for ( z = z0-2 ; z >= 0 ; z-- ) {
+			asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
+			asm volatile("pcmpgtb %mm4,%mm5");
+			asm volatile("paddb %mm4,%mm4");
+			asm volatile("pand %mm0,%mm5");
+			asm volatile("pxor %mm5,%mm4");
+			asm volatile("pxor %mm5,%mm5");
+			asm volatile("pxor %mm6,%mm2");
+			asm volatile("pxor %mm6,%mm4");
+			asm volatile("movq %0,%%mm6" : : "m" (dptr[z][d]));
+		}
+		asm volatile("pcmpgtb %mm4,%mm5");
+		asm volatile("paddb %mm4,%mm4");
+		asm volatile("pand %mm0,%mm5");
+		asm volatile("pxor %mm5,%mm4");
+		asm volatile("pxor %mm5,%mm5");
+		asm volatile("pxor %mm6,%mm2");
+		asm volatile("pxor %mm6,%mm4");
+
+		asm volatile("movntq %%mm2,%0" : "=m" (p[d]));
+		asm volatile("movntq %%mm4,%0" : "=m" (q[d]));
+	}
+
+	asm volatile("sfence" : : : "memory");
+	kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_sse1x1 = {
+	raid6_sse11_gen_syndrome,
+	raid6_have_sse1_or_mmxext,
+	"sse1x1",
+	1			/* Has cache hints */
+};
+
+/*
+ * Unrolled-by-2 SSE1 implementation
+ */
+static void raid6_sse12_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+	u8 **dptr = (u8 **)ptrs;
+	u8 *p, *q;
+	int d, z, z0;
+
+	z0 = disks - 3;		/* Highest data disk */
+	p = dptr[z0+1];		/* XOR parity */
+	q = dptr[z0+2];		/* RS syndrome */
+
+	kernel_fpu_begin();
+
+	asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
+	asm volatile("pxor %mm5,%mm5");	/* Zero temp */
+	asm volatile("pxor %mm7,%mm7"); /* Zero temp */
+
+	/* We uniformly assume a single prefetch covers at least 16 bytes */
+	for ( d = 0 ; d < bytes ; d += 16 ) {
+		asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
+		asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
+		asm volatile("movq %0,%%mm3" : : "m" (dptr[z0][d+8])); /* P[1] */
+		asm volatile("movq %mm2,%mm4");	/* Q[0] */
+		asm volatile("movq %mm3,%mm6"); /* Q[1] */
+		for ( z = z0-1 ; z >= 0 ; z-- ) {
+			asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
+			asm volatile("pcmpgtb %mm4,%mm5");
+			asm volatile("pcmpgtb %mm6,%mm7");
+			asm volatile("paddb %mm4,%mm4");
+			asm volatile("paddb %mm6,%mm6");
+			asm volatile("pand %mm0,%mm5");
+			asm volatile("pand %mm0,%mm7");
+			asm volatile("pxor %mm5,%mm4");
+			asm volatile("pxor %mm7,%mm6");
+			asm volatile("movq %0,%%mm5" : : "m" (dptr[z][d]));
+			asm volatile("movq %0,%%mm7" : : "m" (dptr[z][d+8]));
+			asm volatile("pxor %mm5,%mm2");
+			asm volatile("pxor %mm7,%mm3");
+			asm volatile("pxor %mm5,%mm4");
+			asm volatile("pxor %mm7,%mm6");
+			asm volatile("pxor %mm5,%mm5");
+			asm volatile("pxor %mm7,%mm7");
+		}
+		asm volatile("movntq %%mm2,%0" : "=m" (p[d]));
+		asm volatile("movntq %%mm3,%0" : "=m" (p[d+8]));
+		asm volatile("movntq %%mm4,%0" : "=m" (q[d]));
+		asm volatile("movntq %%mm6,%0" : "=m" (q[d+8]));
+	}
+
+	asm volatile("sfence" : :: "memory");
+	kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_sse1x2 = {
+	raid6_sse12_gen_syndrome,
+	raid6_have_sse1_or_mmxext,
+	"sse1x2",
+	1			/* Has cache hints */
+};
+
+#endif
diff --git a/lib/raid6/raid6sse2.c b/lib/raid6/raid6sse2.c
new file mode 100644
index 000000000000..6ed6c6c0389f
--- /dev/null
+++ b/lib/raid6/raid6sse2.c
@@ -0,0 +1,262 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright 2002 H. Peter Anvin - All Rights Reserved
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ *   Boston MA 02111-1307, USA; either version 2 of the License, or
+ *   (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6sse2.c
+ *
+ * SSE-2 implementation of RAID-6 syndrome functions
+ *
+ */
+
+#if (defined(__i386__) || defined(__x86_64__)) && !defined(__arch_um__)
+
+#include <linux/raid/pq.h>
+#include "raid6x86.h"
+
+static const struct raid6_sse_constants {
+	u64 x1d[2];
+} raid6_sse_constants  __attribute__((aligned(16))) = {
+	{ 0x1d1d1d1d1d1d1d1dULL, 0x1d1d1d1d1d1d1d1dULL },
+};
+
+static int raid6_have_sse2(void)
+{
+	/* Not really boot_cpu but "all_cpus" */
+	return boot_cpu_has(X86_FEATURE_MMX) &&
+		boot_cpu_has(X86_FEATURE_FXSR) &&
+		boot_cpu_has(X86_FEATURE_XMM) &&
+		boot_cpu_has(X86_FEATURE_XMM2);
+}
+
+/*
+ * Plain SSE2 implementation
+ */
+static void raid6_sse21_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+	u8 **dptr = (u8 **)ptrs;
+	u8 *p, *q;
+	int d, z, z0;
+
+	z0 = disks - 3;		/* Highest data disk */
+	p = dptr[z0+1];		/* XOR parity */
+	q = dptr[z0+2];		/* RS syndrome */
+
+	kernel_fpu_begin();
+
+	asm volatile("movdqa %0,%%xmm0" : : "m" (raid6_sse_constants.x1d[0]));
+	asm volatile("pxor %xmm5,%xmm5");	/* Zero temp */
+
+	for ( d = 0 ; d < bytes ; d += 16 ) {
+		asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
+		asm volatile("movdqa %0,%%xmm2" : : "m" (dptr[z0][d])); /* P[0] */
+		asm volatile("prefetchnta %0" : : "m" (dptr[z0-1][d]));
+		asm volatile("movdqa %xmm2,%xmm4"); /* Q[0] */
+		asm volatile("movdqa %0,%%xmm6" : : "m" (dptr[z0-1][d]));
+		for ( z = z0-2 ; z >= 0 ; z-- ) {
+			asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
+			asm volatile("pcmpgtb %xmm4,%xmm5");
+			asm volatile("paddb %xmm4,%xmm4");
+			asm volatile("pand %xmm0,%xmm5");
+			asm volatile("pxor %xmm5,%xmm4");
+			asm volatile("pxor %xmm5,%xmm5");
+			asm volatile("pxor %xmm6,%xmm2");
+			asm volatile("pxor %xmm6,%xmm4");
+			asm volatile("movdqa %0,%%xmm6" : : "m" (dptr[z][d]));
+		}
+		asm volatile("pcmpgtb %xmm4,%xmm5");
+		asm volatile("paddb %xmm4,%xmm4");
+		asm volatile("pand %xmm0,%xmm5");
+		asm volatile("pxor %xmm5,%xmm4");
+		asm volatile("pxor %xmm5,%xmm5");
+		asm volatile("pxor %xmm6,%xmm2");
+		asm volatile("pxor %xmm6,%xmm4");
+
+		asm volatile("movntdq %%xmm2,%0" : "=m" (p[d]));
+		asm volatile("pxor %xmm2,%xmm2");
+		asm volatile("movntdq %%xmm4,%0" : "=m" (q[d]));
+		asm volatile("pxor %xmm4,%xmm4");
+	}
+
+	asm volatile("sfence" : : : "memory");
+	kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_sse2x1 = {
+	raid6_sse21_gen_syndrome,
+	raid6_have_sse2,
+	"sse2x1",
+	1			/* Has cache hints */
+};
+
+/*
+ * Unrolled-by-2 SSE2 implementation
+ */
+static void raid6_sse22_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+	u8 **dptr = (u8 **)ptrs;
+	u8 *p, *q;
+	int d, z, z0;
+
+	z0 = disks - 3;		/* Highest data disk */
+	p = dptr[z0+1];		/* XOR parity */
+	q = dptr[z0+2];		/* RS syndrome */
+
+	kernel_fpu_begin();
+
+	asm volatile("movdqa %0,%%xmm0" : : "m" (raid6_sse_constants.x1d[0]));
+	asm volatile("pxor %xmm5,%xmm5"); /* Zero temp */
+	asm volatile("pxor %xmm7,%xmm7"); /* Zero temp */
+
+	/* We uniformly assume a single prefetch covers at least 32 bytes */
+	for ( d = 0 ; d < bytes ; d += 32 ) {
+		asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
+		asm volatile("movdqa %0,%%xmm2" : : "m" (dptr[z0][d]));    /* P[0] */
+		asm volatile("movdqa %0,%%xmm3" : : "m" (dptr[z0][d+16])); /* P[1] */
+		asm volatile("movdqa %xmm2,%xmm4"); /* Q[0] */
+		asm volatile("movdqa %xmm3,%xmm6"); /* Q[1] */
+		for ( z = z0-1 ; z >= 0 ; z-- ) {
+			asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
+			asm volatile("pcmpgtb %xmm4,%xmm5");
+			asm volatile("pcmpgtb %xmm6,%xmm7");
+			asm volatile("paddb %xmm4,%xmm4");
+			asm volatile("paddb %xmm6,%xmm6");
+			asm volatile("pand %xmm0,%xmm5");
+			asm volatile("pand %xmm0,%xmm7");
+			asm volatile("pxor %xmm5,%xmm4");
+			asm volatile("pxor %xmm7,%xmm6");
+			asm volatile("movdqa %0,%%xmm5" : : "m" (dptr[z][d]));
+			asm volatile("movdqa %0,%%xmm7" : : "m" (dptr[z][d+16]));
+			asm volatile("pxor %xmm5,%xmm2");
+			asm volatile("pxor %xmm7,%xmm3");
+			asm volatile("pxor %xmm5,%xmm4");
+			asm volatile("pxor %xmm7,%xmm6");
+			asm volatile("pxor %xmm5,%xmm5");
+			asm volatile("pxor %xmm7,%xmm7");
+		}
+		asm volatile("movntdq %%xmm2,%0" : "=m" (p[d]));
+		asm volatile("movntdq %%xmm3,%0" : "=m" (p[d+16]));
+		asm volatile("movntdq %%xmm4,%0" : "=m" (q[d]));
+		asm volatile("movntdq %%xmm6,%0" : "=m" (q[d+16]));
+	}
+
+	asm volatile("sfence" : : : "memory");
+	kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_sse2x2 = {
+	raid6_sse22_gen_syndrome,
+	raid6_have_sse2,
+	"sse2x2",
+	1			/* Has cache hints */
+};
+
+#endif
+
+#if defined(__x86_64__) && !defined(__arch_um__)
+
+/*
+ * Unrolled-by-4 SSE2 implementation
+ */
+static void raid6_sse24_gen_syndrome(int disks, size_t bytes, void **ptrs)
+{
+	u8 **dptr = (u8 **)ptrs;
+	u8 *p, *q;
+	int d, z, z0;
+
+	z0 = disks - 3;		/* Highest data disk */
+	p = dptr[z0+1];		/* XOR parity */
+	q = dptr[z0+2];		/* RS syndrome */
+
+	kernel_fpu_begin();
+
+	asm volatile("movdqa %0,%%xmm0" :: "m" (raid6_sse_constants.x1d[0]));
+	asm volatile("pxor %xmm2,%xmm2");	/* P[0] */
+	asm volatile("pxor %xmm3,%xmm3");	/* P[1] */
+	asm volatile("pxor %xmm4,%xmm4"); 	/* Q[0] */
+	asm volatile("pxor %xmm5,%xmm5");	/* Zero temp */
+	asm volatile("pxor %xmm6,%xmm6"); 	/* Q[1] */
+	asm volatile("pxor %xmm7,%xmm7"); 	/* Zero temp */
+	asm volatile("pxor %xmm10,%xmm10");	/* P[2] */
+	asm volatile("pxor %xmm11,%xmm11");	/* P[3] */
+	asm volatile("pxor %xmm12,%xmm12"); 	/* Q[2] */
+	asm volatile("pxor %xmm13,%xmm13");	/* Zero temp */
+	asm volatile("pxor %xmm14,%xmm14"); 	/* Q[3] */
+	asm volatile("pxor %xmm15,%xmm15"); 	/* Zero temp */
+
+	for ( d = 0 ; d < bytes ; d += 64 ) {
+		for ( z = z0 ; z >= 0 ; z-- ) {
+			/* The second prefetch seems to improve performance... */
+			asm volatile("prefetchnta %0" :: "m" (dptr[z][d]));
+			asm volatile("prefetchnta %0" :: "m" (dptr[z][d+32]));
+			asm volatile("pcmpgtb %xmm4,%xmm5");
+			asm volatile("pcmpgtb %xmm6,%xmm7");
+			asm volatile("pcmpgtb %xmm12,%xmm13");
+			asm volatile("pcmpgtb %xmm14,%xmm15");
+			asm volatile("paddb %xmm4,%xmm4");
+			asm volatile("paddb %xmm6,%xmm6");
+			asm volatile("paddb %xmm12,%xmm12");
+			asm volatile("paddb %xmm14,%xmm14");
+			asm volatile("pand %xmm0,%xmm5");
+			asm volatile("pand %xmm0,%xmm7");
+			asm volatile("pand %xmm0,%xmm13");
+			asm volatile("pand %xmm0,%xmm15");
+			asm volatile("pxor %xmm5,%xmm4");
+			asm volatile("pxor %xmm7,%xmm6");
+			asm volatile("pxor %xmm13,%xmm12");
+			asm volatile("pxor %xmm15,%xmm14");
+			asm volatile("movdqa %0,%%xmm5" :: "m" (dptr[z][d]));
+			asm volatile("movdqa %0,%%xmm7" :: "m" (dptr[z][d+16]));
+			asm volatile("movdqa %0,%%xmm13" :: "m" (dptr[z][d+32]));
+			asm volatile("movdqa %0,%%xmm15" :: "m" (dptr[z][d+48]));
+			asm volatile("pxor %xmm5,%xmm2");
+			asm volatile("pxor %xmm7,%xmm3");
+			asm volatile("pxor %xmm13,%xmm10");
+			asm volatile("pxor %xmm15,%xmm11");
+			asm volatile("pxor %xmm5,%xmm4");
+			asm volatile("pxor %xmm7,%xmm6");
+			asm volatile("pxor %xmm13,%xmm12");
+			asm volatile("pxor %xmm15,%xmm14");
+			asm volatile("pxor %xmm5,%xmm5");
+			asm volatile("pxor %xmm7,%xmm7");
+			asm volatile("pxor %xmm13,%xmm13");
+			asm volatile("pxor %xmm15,%xmm15");
+		}
+		asm volatile("movntdq %%xmm2,%0" : "=m" (p[d]));
+		asm volatile("pxor %xmm2,%xmm2");
+		asm volatile("movntdq %%xmm3,%0" : "=m" (p[d+16]));
+		asm volatile("pxor %xmm3,%xmm3");
+		asm volatile("movntdq %%xmm10,%0" : "=m" (p[d+32]));
+		asm volatile("pxor %xmm10,%xmm10");
+		asm volatile("movntdq %%xmm11,%0" : "=m" (p[d+48]));
+		asm volatile("pxor %xmm11,%xmm11");
+		asm volatile("movntdq %%xmm4,%0" : "=m" (q[d]));
+		asm volatile("pxor %xmm4,%xmm4");
+		asm volatile("movntdq %%xmm6,%0" : "=m" (q[d+16]));
+		asm volatile("pxor %xmm6,%xmm6");
+		asm volatile("movntdq %%xmm12,%0" : "=m" (q[d+32]));
+		asm volatile("pxor %xmm12,%xmm12");
+		asm volatile("movntdq %%xmm14,%0" : "=m" (q[d+48]));
+		asm volatile("pxor %xmm14,%xmm14");
+	}
+
+	asm volatile("sfence" : : : "memory");
+	kernel_fpu_end();
+}
+
+const struct raid6_calls raid6_sse2x4 = {
+	raid6_sse24_gen_syndrome,
+	raid6_have_sse2,
+	"sse2x4",
+	1			/* Has cache hints */
+};
+
+#endif
diff --git a/lib/raid6/raid6test/Makefile b/lib/raid6/raid6test/Makefile
new file mode 100644
index 000000000000..2874cbef529d
--- /dev/null
+++ b/lib/raid6/raid6test/Makefile
@@ -0,0 +1,75 @@
+#
+# This is a simple Makefile to test some of the RAID-6 code
+# from userspace.
+#
+
+CC	 = gcc
+OPTFLAGS = -O2			# Adjust as desired
+CFLAGS	 = -I.. -I ../../../include -g $(OPTFLAGS)
+LD	 = ld
+AWK	 = awk
+AR	 = ar
+RANLIB	 = ranlib
+
+.c.o:
+	$(CC) $(CFLAGS) -c -o $@ $<
+
+%.c: ../%.c
+	cp -f $< $@
+
+%.uc: ../%.uc
+	cp -f $< $@
+
+all:	raid6.a raid6test
+
+raid6.a: raid6int1.o raid6int2.o raid6int4.o raid6int8.o raid6int16.o \
+	 raid6int32.o \
+	 raid6mmx.o raid6sse1.o raid6sse2.o \
+	 raid6altivec1.o raid6altivec2.o raid6altivec4.o raid6altivec8.o \
+	 raid6recov.o raid6algos.o \
+	 raid6tables.o
+	 rm -f $@
+	 $(AR) cq $@ $^
+	 $(RANLIB) $@
+
+raid6test: test.c raid6.a
+	$(CC) $(CFLAGS) -o raid6test $^
+
+raid6altivec1.c: raid6altivec.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=1 < raid6altivec.uc > $@
+
+raid6altivec2.c: raid6altivec.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=2 < raid6altivec.uc > $@
+
+raid6altivec4.c: raid6altivec.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=4 < raid6altivec.uc > $@
+
+raid6altivec8.c: raid6altivec.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=8 < raid6altivec.uc > $@
+
+raid6int1.c: raid6int.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=1 < raid6int.uc > $@
+
+raid6int2.c: raid6int.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=2 < raid6int.uc > $@
+
+raid6int4.c: raid6int.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=4 < raid6int.uc > $@
+
+raid6int8.c: raid6int.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=8 < raid6int.uc > $@
+
+raid6int16.c: raid6int.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=16 < raid6int.uc > $@
+
+raid6int32.c: raid6int.uc ../unroll.awk
+	$(AWK) ../unroll.awk -vN=32 < raid6int.uc > $@
+
+raid6tables.c: mktables
+	./mktables > raid6tables.c
+
+clean:
+	rm -f *.o *.a mktables mktables.c raid6int.uc raid6*.c raid6test
+
+spotless: clean
+	rm -f *~
diff --git a/lib/raid6/raid6test/test.c b/lib/raid6/raid6test/test.c
new file mode 100644
index 000000000000..7a930318b17d
--- /dev/null
+++ b/lib/raid6/raid6test/test.c
@@ -0,0 +1,124 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright 2002-2007 H. Peter Anvin - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2 or (at your
+ *   option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6test.c
+ *
+ * Test RAID-6 recovery with various algorithms
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <linux/raid/pq.h>
+
+#define NDISKS		16	/* Including P and Q */
+
+const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
+struct raid6_calls raid6_call;
+
+char *dataptrs[NDISKS];
+char data[NDISKS][PAGE_SIZE];
+char recovi[PAGE_SIZE], recovj[PAGE_SIZE];
+
+static void makedata(void)
+{
+	int i, j;
+
+	for (i = 0; i < NDISKS; i++) {
+		for (j = 0; j < PAGE_SIZE; j++)
+			data[i][j] = rand();
+
+		dataptrs[i] = data[i];
+	}
+}
+
+static char disk_type(int d)
+{
+	switch (d) {
+	case NDISKS-2:
+		return 'P';
+	case NDISKS-1:
+		return 'Q';
+	default:
+		return 'D';
+	}
+}
+
+static int test_disks(int i, int j)
+{
+	int erra, errb;
+
+	memset(recovi, 0xf0, PAGE_SIZE);
+	memset(recovj, 0xba, PAGE_SIZE);
+
+	dataptrs[i] = recovi;
+	dataptrs[j] = recovj;
+
+	raid6_dual_recov(NDISKS, PAGE_SIZE, i, j, (void **)&dataptrs);
+
+	erra = memcmp(data[i], recovi, PAGE_SIZE);
+	errb = memcmp(data[j], recovj, PAGE_SIZE);
+
+	if (i < NDISKS-2 && j == NDISKS-1) {
+		/* We don't implement the DQ failure scenario, since it's
+		   equivalent to a RAID-5 failure (XOR, then recompute Q) */
+		erra = errb = 0;
+	} else {
+		printf("algo=%-8s  faila=%3d(%c)  failb=%3d(%c)  %s\n",
+		       raid6_call.name,
+		       i, disk_type(i),
+		       j, disk_type(j),
+		       (!erra && !errb) ? "OK" :
+		       !erra ? "ERRB" :
+		       !errb ? "ERRA" : "ERRAB");
+	}
+
+	dataptrs[i] = data[i];
+	dataptrs[j] = data[j];
+
+	return erra || errb;
+}
+
+int main(int argc, char *argv[])
+{
+	const struct raid6_calls *const *algo;
+	int i, j;
+	int err = 0;
+
+	makedata();
+
+	for (algo = raid6_algos; *algo; algo++) {
+		if (!(*algo)->valid || (*algo)->valid()) {
+			raid6_call = **algo;
+
+			/* Nuke syndromes */
+			memset(data[NDISKS-2], 0xee, 2*PAGE_SIZE);
+
+			/* Generate assumed good syndrome */
+			raid6_call.gen_syndrome(NDISKS, PAGE_SIZE,
+						(void **)&dataptrs);
+
+			for (i = 0; i < NDISKS-1; i++)
+				for (j = i+1; j < NDISKS; j++)
+					err += test_disks(i, j);
+		}
+		printf("\n");
+	}
+
+	printf("\n");
+	/* Pick the best algorithm test */
+	raid6_select_algo();
+
+	if (err)
+		printf("\n*** ERRORS FOUND ***\n");
+
+	return err;
+}
diff --git a/lib/raid6/raid6x86.h b/lib/raid6/raid6x86.h
new file mode 100644
index 000000000000..4c22c1568558
--- /dev/null
+++ b/lib/raid6/raid6x86.h
@@ -0,0 +1,61 @@
+/* ----------------------------------------------------------------------- *
+ *
+ *   Copyright 2002-2004 H. Peter Anvin - All Rights Reserved
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ *   Boston MA 02111-1307, USA; either version 2 of the License, or
+ *   (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * raid6x86.h
+ *
+ * Definitions common to x86 and x86-64 RAID-6 code only
+ */
+
+#ifndef LINUX_RAID_RAID6X86_H
+#define LINUX_RAID_RAID6X86_H
+
+#if (defined(__i386__) || defined(__x86_64__)) && !defined(__arch_um__)
+
+#ifdef __KERNEL__ /* Real code */
+
+#include <asm/i387.h>
+
+#else /* Dummy code for user space testing */
+
+static inline void kernel_fpu_begin(void)
+{
+}
+
+static inline void kernel_fpu_end(void)
+{
+}
+
+#define X86_FEATURE_MMX		(0*32+23) /* Multimedia Extensions */
+#define X86_FEATURE_FXSR	(0*32+24) /* FXSAVE and FXRSTOR instructions
+					   * (fast save and restore) */
+#define X86_FEATURE_XMM		(0*32+25) /* Streaming SIMD Extensions */
+#define X86_FEATURE_XMM2	(0*32+26) /* Streaming SIMD Extensions-2 */
+#define X86_FEATURE_MMXEXT	(1*32+22) /* AMD MMX extensions */
+
+/* Should work well enough on modern CPUs for testing */
+static inline int boot_cpu_has(int flag)
+{
+	u32 eax = (flag >> 5) ? 0x80000001 : 1;
+	u32 edx;
+
+	asm volatile("cpuid"
+		     : "+a" (eax), "=d" (edx)
+		     : : "ecx", "ebx");
+
+	return (edx >> (flag & 31)) & 1;
+}
+
+#endif /* ndef __KERNEL__ */
+
+#endif
+#endif
diff --git a/lib/raid6/unroll.awk b/lib/raid6/unroll.awk
new file mode 100644
index 000000000000..c6aa03631df8
--- /dev/null
+++ b/lib/raid6/unroll.awk
@@ -0,0 +1,20 @@
+
+# This filter requires one command line option of form -vN=n
+# where n must be a decimal number.
+#
+# Repeat each input line containing $$ n times, replacing $$ with 0...n-1.
+# Replace each $# with n, and each $* with a single $.
+
+BEGIN {
+	n = N + 0
+}
+{
+	if (/\$\$/) { rep = n } else { rep = 1 }
+	for (i = 0; i < rep; ++i) {
+		tmp = $0
+		gsub(/\$\$/, i, tmp)
+		gsub(/\$\#/, n, tmp)
+		gsub(/\$\*/, "$", tmp)
+		print tmp
+	}
+}
diff --git a/lib/random32.c b/lib/random32.c
index 870dc3fc0f0f..fc3545a32771 100644
--- a/lib/random32.c
+++ b/lib/random32.c
@@ -127,7 +127,7 @@ core_initcall(random32_init);
 
 /*
  *	Generate better values after random number generator
- *	is fully initalized.
+ *	is fully initialized.
  */
 static int __init random32_reseed(void)
 {
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index a009055140ec..34e3082632d8 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -50,19 +50,11 @@
  */
 #define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
 
-/*
- * Enumeration for sync targets
- */
-enum dma_sync_target {
-	SYNC_FOR_CPU = 0,
-	SYNC_FOR_DEVICE = 1,
-};
-
 int swiotlb_force;
 
 /*
- * Used to do a quick range check in unmap_single and
- * sync_single_*, to see if the memory was in fact allocated by this
+ * Used to do a quick range check in swiotlb_tbl_unmap_single and
+ * swiotlb_tbl_sync_single_*, to see if the memory was in fact allocated by this
  * API.
  */
 static char *io_tlb_start, *io_tlb_end;
@@ -140,28 +132,14 @@ void swiotlb_print_info(void)
 	       (unsigned long long)pend);
 }
 
-/*
- * Statically reserve bounce buffer space and initialize bounce buffer data
- * structures for the software IO TLB used to implement the DMA API.
- */
-void __init
-swiotlb_init_with_default_size(size_t default_size, int verbose)
+void __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
 {
 	unsigned long i, bytes;
 
-	if (!io_tlb_nslabs) {
-		io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
-		io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
-	}
-
-	bytes = io_tlb_nslabs << IO_TLB_SHIFT;
+	bytes = nslabs << IO_TLB_SHIFT;
 
-	/*
-	 * Get IO TLB memory from the low pages
-	 */
-	io_tlb_start = alloc_bootmem_low_pages(bytes);
-	if (!io_tlb_start)
-		panic("Cannot allocate SWIOTLB buffer");
+	io_tlb_nslabs = nslabs;
+	io_tlb_start = tlb;
 	io_tlb_end = io_tlb_start + bytes;
 
 	/*
@@ -185,6 +163,32 @@ swiotlb_init_with_default_size(size_t default_size, int verbose)
 		swiotlb_print_info();
 }
 
+/*
+ * Statically reserve bounce buffer space and initialize bounce buffer data
+ * structures for the software IO TLB used to implement the DMA API.
+ */
+void __init
+swiotlb_init_with_default_size(size_t default_size, int verbose)
+{
+	unsigned long bytes;
+
+	if (!io_tlb_nslabs) {
+		io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
+		io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
+	}
+
+	bytes = io_tlb_nslabs << IO_TLB_SHIFT;
+
+	/*
+	 * Get IO TLB memory from the low pages
+	 */
+	io_tlb_start = alloc_bootmem_low_pages(bytes);
+	if (!io_tlb_start)
+		panic("Cannot allocate SWIOTLB buffer");
+
+	swiotlb_init_with_tbl(io_tlb_start, io_tlb_nslabs, verbose);
+}
+
 void __init
 swiotlb_init(int verbose)
 {
@@ -323,8 +327,8 @@ static int is_swiotlb_buffer(phys_addr_t paddr)
 /*
  * Bounce: copy the swiotlb buffer back to the original dma location
  */
-static void swiotlb_bounce(phys_addr_t phys, char *dma_addr, size_t size,
-			   enum dma_data_direction dir)
+void swiotlb_bounce(phys_addr_t phys, char *dma_addr, size_t size,
+		    enum dma_data_direction dir)
 {
 	unsigned long pfn = PFN_DOWN(phys);
 
@@ -360,26 +364,25 @@ static void swiotlb_bounce(phys_addr_t phys, char *dma_addr, size_t size,
 			memcpy(phys_to_virt(phys), dma_addr, size);
 	}
 }
+EXPORT_SYMBOL_GPL(swiotlb_bounce);
 
-/*
- * Allocates bounce buffer and returns its kernel virtual address.
- */
-static void *
-map_single(struct device *hwdev, phys_addr_t phys, size_t size, int dir)
+void *swiotlb_tbl_map_single(struct device *hwdev, dma_addr_t tbl_dma_addr,
+			     phys_addr_t phys, size_t size,
+			     enum dma_data_direction dir)
 {
 	unsigned long flags;
 	char *dma_addr;
 	unsigned int nslots, stride, index, wrap;
 	int i;
-	unsigned long start_dma_addr;
 	unsigned long mask;
 	unsigned long offset_slots;
 	unsigned long max_slots;
 
 	mask = dma_get_seg_boundary(hwdev);
-	start_dma_addr = swiotlb_virt_to_bus(hwdev, io_tlb_start) & mask;
 
-	offset_slots = ALIGN(start_dma_addr, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
+	tbl_dma_addr &= mask;
+
+	offset_slots = ALIGN(tbl_dma_addr, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
 
 	/*
  	 * Carefully handle integer overflow which can occur when mask == ~0UL.
@@ -466,12 +469,27 @@ found:
 
 	return dma_addr;
 }
+EXPORT_SYMBOL_GPL(swiotlb_tbl_map_single);
+
+/*
+ * Allocates bounce buffer and returns its kernel virtual address.
+ */
+
+static void *
+map_single(struct device *hwdev, phys_addr_t phys, size_t size,
+	   enum dma_data_direction dir)
+{
+	dma_addr_t start_dma_addr = swiotlb_virt_to_bus(hwdev, io_tlb_start);
+
+	return swiotlb_tbl_map_single(hwdev, start_dma_addr, phys, size, dir);
+}
 
 /*
  * dma_addr is the kernel virtual address of the bounce buffer to unmap.
  */
-static void
-do_unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
+void
+swiotlb_tbl_unmap_single(struct device *hwdev, char *dma_addr, size_t size,
+			enum dma_data_direction dir)
 {
 	unsigned long flags;
 	int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
@@ -509,10 +527,12 @@ do_unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
 	}
 	spin_unlock_irqrestore(&io_tlb_lock, flags);
 }
+EXPORT_SYMBOL_GPL(swiotlb_tbl_unmap_single);
 
-static void
-sync_single(struct device *hwdev, char *dma_addr, size_t size,
-	    int dir, int target)
+void
+swiotlb_tbl_sync_single(struct device *hwdev, char *dma_addr, size_t size,
+			enum dma_data_direction dir,
+			enum dma_sync_target target)
 {
 	int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;
 	phys_addr_t phys = io_tlb_orig_addr[index];
@@ -536,6 +556,7 @@ sync_single(struct device *hwdev, char *dma_addr, size_t size,
 		BUG();
 	}
 }
+EXPORT_SYMBOL_GPL(swiotlb_tbl_sync_single);
 
 void *
 swiotlb_alloc_coherent(struct device *hwdev, size_t size,
@@ -559,8 +580,8 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 	}
 	if (!ret) {
 		/*
-		 * We are either out of memory or the device can't DMA
-		 * to GFP_DMA memory; fall back on map_single(), which
+		 * We are either out of memory or the device can't DMA to
+		 * GFP_DMA memory; fall back on map_single(), which
 		 * will grab memory from the lowest available address range.
 		 */
 		ret = map_single(hwdev, 0, size, DMA_FROM_DEVICE);
@@ -578,7 +599,7 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 		       (unsigned long long)dev_addr);
 
 		/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
-		do_unmap_single(hwdev, ret, size, DMA_TO_DEVICE);
+		swiotlb_tbl_unmap_single(hwdev, ret, size, DMA_TO_DEVICE);
 		return NULL;
 	}
 	*dma_handle = dev_addr;
@@ -596,13 +617,14 @@ swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
 	if (!is_swiotlb_buffer(paddr))
 		free_pages((unsigned long)vaddr, get_order(size));
 	else
-		/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
-		do_unmap_single(hwdev, vaddr, size, DMA_TO_DEVICE);
+		/* DMA_TO_DEVICE to avoid memcpy in swiotlb_tbl_unmap_single */
+		swiotlb_tbl_unmap_single(hwdev, vaddr, size, DMA_TO_DEVICE);
 }
 EXPORT_SYMBOL(swiotlb_free_coherent);
 
 static void
-swiotlb_full(struct device *dev, size_t size, int dir, int do_panic)
+swiotlb_full(struct device *dev, size_t size, enum dma_data_direction dir,
+	     int do_panic)
 {
 	/*
 	 * Ran out of IOMMU space for this operation. This is very bad.
@@ -680,14 +702,14 @@ EXPORT_SYMBOL_GPL(swiotlb_map_page);
  * whatever the device wrote there.
  */
 static void unmap_single(struct device *hwdev, dma_addr_t dev_addr,
-			 size_t size, int dir)
+			 size_t size, enum dma_data_direction dir)
 {
 	phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
 
 	BUG_ON(dir == DMA_NONE);
 
 	if (is_swiotlb_buffer(paddr)) {
-		do_unmap_single(hwdev, phys_to_virt(paddr), size, dir);
+		swiotlb_tbl_unmap_single(hwdev, phys_to_virt(paddr), size, dir);
 		return;
 	}
 
@@ -723,14 +745,16 @@ EXPORT_SYMBOL_GPL(swiotlb_unmap_page);
  */
 static void
 swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
-		    size_t size, int dir, int target)
+		    size_t size, enum dma_data_direction dir,
+		    enum dma_sync_target target)
 {
 	phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
 
 	BUG_ON(dir == DMA_NONE);
 
 	if (is_swiotlb_buffer(paddr)) {
-		sync_single(hwdev, phys_to_virt(paddr), size, dir, target);
+		swiotlb_tbl_sync_single(hwdev, phys_to_virt(paddr), size, dir,
+				       target);
 		return;
 	}
 
@@ -809,7 +833,7 @@ EXPORT_SYMBOL(swiotlb_map_sg_attrs);
 
 int
 swiotlb_map_sg(struct device *hwdev, struct scatterlist *sgl, int nelems,
-	       int dir)
+	       enum dma_data_direction dir)
 {
 	return swiotlb_map_sg_attrs(hwdev, sgl, nelems, dir, NULL);
 }
@@ -836,7 +860,7 @@ EXPORT_SYMBOL(swiotlb_unmap_sg_attrs);
 
 void
 swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sgl, int nelems,
-		 int dir)
+		 enum dma_data_direction dir)
 {
 	return swiotlb_unmap_sg_attrs(hwdev, sgl, nelems, dir, NULL);
 }
@@ -851,7 +875,8 @@ EXPORT_SYMBOL(swiotlb_unmap_sg);
  */
 static void
 swiotlb_sync_sg(struct device *hwdev, struct scatterlist *sgl,
-		int nelems, int dir, int target)
+		int nelems, enum dma_data_direction dir,
+		enum dma_sync_target target)
 {
 	struct scatterlist *sg;
 	int i;
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index b8a2f549ab0e..4ee19d0d3910 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -980,6 +980,11 @@ char *uuid_string(char *buf, char *end, const u8 *addr,
  *             [0][1][2][3]-[4][5]-[6][7]-[8][9]-[10][11][12][13][14][15]
  *           little endian output byte order is:
  *             [3][2][1][0]-[5][4]-[7][6]-[8][9]-[10][11][12][13][14][15]
+ * - 'V' For a struct va_format which contains a format string * and va_list *,
+ *       call vsnprintf(->format, *->va_list).
+ *       Implements a "recursive vsnprintf".
+ *       Do not use this feature without some mechanism to verify the
+ *       correctness of the format string and va_list arguments.
  *
  * Note: The difference between 'S' and 'F' is that on ia64 and ppc64
  * function pointers are really function descriptors, which contain a
@@ -1025,6 +1030,10 @@ char *pointer(const char *fmt, char *buf, char *end, void *ptr,
 		break;
 	case 'U':
 		return uuid_string(buf, end, ptr, spec, fmt);
+	case 'V':
+		return buf + vsnprintf(buf, end - buf,
+				       ((struct va_format *)ptr)->fmt,
+				       *(((struct va_format *)ptr)->va));
 	}
 	spec.flags |= SMALL;
 	if (spec.field_width == -1) {