Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 411 insertions, 0 deletions

diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
new file mode 100644
index 000000000000..6d3e8b1bd1f2
--- /dev/null
+++ b/net/ipv4/Kconfig
@@ -0,0 +1,411 @@
+#
+# IP configuration
+#
+config IP_MULTICAST
+	bool "IP: multicasting"
+	depends on INET
+	help
+	  This is code for addressing several networked computers at once,
+	  enlarging your kernel by about 2 KB. You need multicasting if you
+	  intend to participate in the MBONE, a high bandwidth network on top
+	  of the Internet which carries audio and video broadcasts. More
+	  information about the MBONE is on the WWW at
+	  <http://www-itg.lbl.gov/mbone/>. Information about the multicast
+	  capabilities of the various network cards is contained in
+	  <file:Documentation/networking/multicast.txt>. For most people, it's
+	  safe to say N.
+
+config IP_ADVANCED_ROUTER
+	bool "IP: advanced router"
+	depends on INET
+	---help---
+	  If you intend to run your Linux box mostly as a router, i.e. as a
+	  computer that forwards and redistributes network packets, say Y; you
+	  will then be presented with several options that allow more precise
+	  control about the routing process.
+
+	  The answer to this question won't directly affect the kernel:
+	  answering N will just cause the configurator to skip all the
+	  questions about advanced routing.
+
+	  Note that your box can only act as a router if you enable IP
+	  forwarding in your kernel; you can do that by saying Y to "/proc
+	  file system support" and "Sysctl support" below and executing the
+	  line
+
+	  echo "1" > /proc/sys/net/ipv4/ip_forward
+
+	  at boot time after the /proc file system has been mounted.
+
+	  If you turn on IP forwarding, you will also get the rp_filter, which
+	  automatically rejects incoming packets if the routing table entry
+	  for their source address doesn't match the network interface they're
+	  arriving on. This has security advantages because it prevents the
+	  so-called IP spoofing, however it can pose problems if you use
+	  asymmetric routing (packets from you to a host take a different path
+	  than packets from that host to you) or if you operate a non-routing
+	  host which has several IP addresses on different interfaces. To turn
+	  rp_filter off use:
+
+	  echo 0 > /proc/sys/net/ipv4/conf/<device>/rp_filter
+	  or
+	  echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
+
+	  If unsure, say N here.
+
+config IP_MULTIPLE_TABLES
+	bool "IP: policy routing"
+	depends on IP_ADVANCED_ROUTER
+	---help---
+	  Normally, a router decides what to do with a received packet based
+	  solely on the packet's final destination address. If you say Y here,
+	  the Linux router will also be able to take the packet's source
+	  address into account. Furthermore, the TOS (Type-Of-Service) field
+	  of the packet can be used for routing decisions as well.
+
+	  If you are interested in this, please see the preliminary
+	  documentation at <http://www.compendium.com.ar/policy-routing.txt>
+	  and <ftp://post.tepkom.ru/pub/vol2/Linux/docs/advanced-routing.tex>.
+	  You will need supporting software from
+	  <ftp://ftp.tux.org/pub/net/ip-routing/>.
+
+	  If unsure, say N.
+
+config IP_ROUTE_FWMARK
+	bool "IP: use netfilter MARK value as routing key"
+	depends on IP_MULTIPLE_TABLES && NETFILTER
+	help
+	  If you say Y here, you will be able to specify different routes for
+	  packets with different mark values (see iptables(8), MARK target).
+
+config IP_ROUTE_MULTIPATH
+	bool "IP: equal cost multipath"
+	depends on IP_ADVANCED_ROUTER
+	help
+	  Normally, the routing tables specify a single action to be taken in
+	  a deterministic manner for a given packet. If you say Y here
+	  however, it becomes possible to attach several actions to a packet
+	  pattern, in effect specifying several alternative paths to travel
+	  for those packets. The router considers all these paths to be of
+	  equal "cost" and chooses one of them in a non-deterministic fashion
+	  if a matching packet arrives.
+
+config IP_ROUTE_MULTIPATH_CACHED
+	bool "IP: equal cost multipath with caching support (EXPERIMENTAL)"
+	depends on: IP_ROUTE_MULTIPATH
+	help
+	  Normally, equal cost multipath routing is not supported by the
+	  routing cache. If you say Y here, alternative routes are cached
+	  and on cache lookup a route is chosen in a configurable fashion.
+
+	  If unsure, say N.
+
+config IP_ROUTE_MULTIPATH_RR
+	tristate "MULTIPATH: round robin algorithm"
+	depends on IP_ROUTE_MULTIPATH_CACHED
+	help
+	  Mulitpath routes are chosen according to Round Robin
+
+config IP_ROUTE_MULTIPATH_RANDOM
+	tristate "MULTIPATH: random algorithm"
+	depends on IP_ROUTE_MULTIPATH_CACHED
+	help
+	  Multipath routes are chosen in a random fashion. Actually,
+	  there is no weight for a route. The advantage of this policy
+	  is that it is implemented stateless and therefore introduces only
+	  a very small delay.
+
+config IP_ROUTE_MULTIPATH_WRANDOM
+	tristate "MULTIPATH: weighted random algorithm"
+	depends on IP_ROUTE_MULTIPATH_CACHED
+	help
+	  Multipath routes are chosen in a weighted random fashion. 
+	  The per route weights are the weights visible via ip route 2. As the
+	  corresponding state management introduces some overhead routing delay
+	  is increased.
+
+config IP_ROUTE_MULTIPATH_DRR
+	tristate "MULTIPATH: interface round robin algorithm"
+	depends on IP_ROUTE_MULTIPATH_CACHED
+	help
+	  Connections are distributed in a round robin fashion over the
+	  available interfaces. This policy makes sense if the connections 
+	  should be primarily distributed on interfaces and not on routes. 
+
+config IP_ROUTE_VERBOSE
+	bool "IP: verbose route monitoring"
+	depends on IP_ADVANCED_ROUTER
+	help
+	  If you say Y here, which is recommended, then the kernel will print
+	  verbose messages regarding the routing, for example warnings about
+	  received packets which look strange and could be evidence of an
+	  attack or a misconfigured system somewhere. The information is
+	  handled by the klogd daemon which is responsible for kernel messages
+	  ("man klogd").
+
+config IP_PNP
+	bool "IP: kernel level autoconfiguration"
+	depends on INET
+	help
+	  This enables automatic configuration of IP addresses of devices and
+	  of the routing table during kernel boot, based on either information
+	  supplied on the kernel command line or by BOOTP or RARP protocols.
+	  You need to say Y only for diskless machines requiring network
+	  access to boot (in which case you want to say Y to "Root file system
+	  on NFS" as well), because all other machines configure the network
+	  in their startup scripts.
+
+config IP_PNP_DHCP
+	bool "IP: DHCP support"
+	depends on IP_PNP
+	---help---
+	  If you want your Linux box to mount its whole root file system (the
+	  one containing the directory /) from some other computer over the
+	  net via NFS and you want the IP address of your computer to be
+	  discovered automatically at boot time using the DHCP protocol (a
+	  special protocol designed for doing this job), say Y here. In case
+	  the boot ROM of your network card was designed for booting Linux and
+	  does DHCP itself, providing all necessary information on the kernel
+	  command line, you can say N here.
+
+	  If unsure, say Y. Note that if you want to use DHCP, a DHCP server
+	  must be operating on your network.  Read
+	  <file:Documentation/nfsroot.txt> for details.
+
+config IP_PNP_BOOTP
+	bool "IP: BOOTP support"
+	depends on IP_PNP
+	---help---
+	  If you want your Linux box to mount its whole root file system (the
+	  one containing the directory /) from some other computer over the
+	  net via NFS and you want the IP address of your computer to be
+	  discovered automatically at boot time using the BOOTP protocol (a
+	  special protocol designed for doing this job), say Y here. In case
+	  the boot ROM of your network card was designed for booting Linux and
+	  does BOOTP itself, providing all necessary information on the kernel
+	  command line, you can say N here. If unsure, say Y. Note that if you
+	  want to use BOOTP, a BOOTP server must be operating on your network.
+	  Read <file:Documentation/nfsroot.txt> for details.
+
+config IP_PNP_RARP
+	bool "IP: RARP support"
+	depends on IP_PNP
+	help
+	  If you want your Linux box to mount its whole root file system (the
+	  one containing the directory /) from some other computer over the
+	  net via NFS and you want the IP address of your computer to be
+	  discovered automatically at boot time using the RARP protocol (an
+	  older protocol which is being obsoleted by BOOTP and DHCP), say Y
+	  here. Note that if you want to use RARP, a RARP server must be
+	  operating on your network. Read <file:Documentation/nfsroot.txt> for
+	  details.
+
+# not yet ready..
+#   bool '    IP: ARP support' CONFIG_IP_PNP_ARP		
+config NET_IPIP
+	tristate "IP: tunneling"
+	depends on INET
+	select INET_TUNNEL
+	---help---
+	  Tunneling means encapsulating data of one protocol type within
+	  another protocol and sending it over a channel that understands the
+	  encapsulating protocol. This particular tunneling driver implements
+	  encapsulation of IP within IP, which sounds kind of pointless, but
+	  can be useful if you want to make your (or some other) machine
+	  appear on a different network than it physically is, or to use
+	  mobile-IP facilities (allowing laptops to seamlessly move between
+	  networks without changing their IP addresses).
+
+	  Saying Y to this option will produce two modules ( = code which can
+	  be inserted in and removed from the running kernel whenever you
+	  want). Most people won't need this and can say N.
+
+config NET_IPGRE
+	tristate "IP: GRE tunnels over IP"
+	depends on INET
+	select XFRM
+	help
+	  Tunneling means encapsulating data of one protocol type within
+	  another protocol and sending it over a channel that understands the
+	  encapsulating protocol. This particular tunneling driver implements
+	  GRE (Generic Routing Encapsulation) and at this time allows
+	  encapsulating of IPv4 or IPv6 over existing IPv4 infrastructure.
+	  This driver is useful if the other endpoint is a Cisco router: Cisco
+	  likes GRE much better than the other Linux tunneling driver ("IP
+	  tunneling" above). In addition, GRE allows multicast redistribution
+	  through the tunnel.
+
+config NET_IPGRE_BROADCAST
+	bool "IP: broadcast GRE over IP"
+	depends on IP_MULTICAST && NET_IPGRE
+	help
+	  One application of GRE/IP is to construct a broadcast WAN (Wide Area
+	  Network), which looks like a normal Ethernet LAN (Local Area
+	  Network), but can be distributed all over the Internet. If you want
+	  to do that, say Y here and to "IP multicast routing" below.
+
+config IP_MROUTE
+	bool "IP: multicast routing"
+	depends on IP_MULTICAST
+	help
+	  This is used if you want your machine to act as a router for IP
+	  packets that have several destination addresses. It is needed on the
+	  MBONE, a high bandwidth network on top of the Internet which carries
+	  audio and video broadcasts. In order to do that, you would most
+	  likely run the program mrouted. Information about the multicast
+	  capabilities of the various network cards is contained in
+	  <file:Documentation/networking/multicast.txt>. If you haven't heard
+	  about it, you don't need it.
+
+config IP_PIMSM_V1
+	bool "IP: PIM-SM version 1 support"
+	depends on IP_MROUTE
+	help
+	  Kernel side support for Sparse Mode PIM (Protocol Independent
+	  Multicast) version 1. This multicast routing protocol is used widely
+	  because Cisco supports it. You need special software to use it
+	  (pimd-v1). Please see <http://netweb.usc.edu/pim/> for more
+	  information about PIM.
+
+	  Say Y if you want to use PIM-SM v1. Note that you can say N here if
+	  you just want to use Dense Mode PIM.
+
+config IP_PIMSM_V2
+	bool "IP: PIM-SM version 2 support"
+	depends on IP_MROUTE
+	help
+	  Kernel side support for Sparse Mode PIM version 2. In order to use
+	  this, you need an experimental routing daemon supporting it (pimd or
+	  gated-5). This routing protocol is not used widely, so say N unless
+	  you want to play with it.
+
+config ARPD
+	bool "IP: ARP daemon support (EXPERIMENTAL)"
+	depends on INET && EXPERIMENTAL
+	---help---
+	  Normally, the kernel maintains an internal cache which maps IP
+	  addresses to hardware addresses on the local network, so that
+	  Ethernet/Token Ring/ etc. frames are sent to the proper address on
+	  the physical networking layer. For small networks having a few
+	  hundred directly connected hosts or less, keeping this address
+	  resolution (ARP) cache inside the kernel works well. However,
+	  maintaining an internal ARP cache does not work well for very large
+	  switched networks, and will use a lot of kernel memory if TCP/IP
+	  connections are made to many machines on the network.
+
+	  If you say Y here, the kernel's internal ARP cache will never grow
+	  to more than 256 entries (the oldest entries are expired in a LIFO
+	  manner) and communication will be attempted with the user space ARP
+	  daemon arpd. Arpd then answers the address resolution request either
+	  from its own cache or by asking the net.
+
+	  This code is experimental and also obsolete. If you want to use it,
+	  you need to find a version of the daemon arpd on the net somewhere,
+	  and you should also say Y to "Kernel/User network link driver",
+	  below. If unsure, say N.
+
+config SYN_COOKIES
+	bool "IP: TCP syncookie support (disabled per default)"
+	depends on INET
+	---help---
+	  Normal TCP/IP networking is open to an attack known as "SYN
+	  flooding". This denial-of-service attack prevents legitimate remote
+	  users from being able to connect to your computer during an ongoing
+	  attack and requires very little work from the attacker, who can
+	  operate from anywhere on the Internet.
+
+	  SYN cookies provide protection against this type of attack. If you
+	  say Y here, the TCP/IP stack will use a cryptographic challenge
+	  protocol known as "SYN cookies" to enable legitimate users to
+	  continue to connect, even when your machine is under attack. There
+	  is no need for the legitimate users to change their TCP/IP software;
+	  SYN cookies work transparently to them. For technical information
+	  about SYN cookies, check out <http://cr.yp.to/syncookies.html>.
+
+	  If you are SYN flooded, the source address reported by the kernel is
+	  likely to have been forged by the attacker; it is only reported as
+	  an aid in tracing the packets to their actual source and should not
+	  be taken as absolute truth.
+
+	  SYN cookies may prevent correct error reporting on clients when the
+	  server is really overloaded. If this happens frequently better turn
+	  them off.
+
+	  If you say Y here, note that SYN cookies aren't enabled by default;
+	  you can enable them by saying Y to "/proc file system support" and
+	  "Sysctl support" below and executing the command
+
+	  echo 1 >/proc/sys/net/ipv4/tcp_syncookies
+
+	  at boot time after the /proc file system has been mounted.
+
+	  If unsure, say N.
+
+config INET_AH
+	tristate "IP: AH transformation"
+	depends on INET
+	select XFRM
+	select CRYPTO
+	select CRYPTO_HMAC
+	select CRYPTO_MD5
+	select CRYPTO_SHA1
+	---help---
+	  Support for IPsec AH.
+
+	  If unsure, say Y.
+
+config INET_ESP
+	tristate "IP: ESP transformation"
+	depends on INET
+	select XFRM
+	select CRYPTO
+	select CRYPTO_HMAC
+	select CRYPTO_MD5
+	select CRYPTO_SHA1
+	select CRYPTO_DES
+	---help---
+	  Support for IPsec ESP.
+
+	  If unsure, say Y.
+
+config INET_IPCOMP
+	tristate "IP: IPComp transformation"
+	depends on INET
+	select XFRM
+	select INET_TUNNEL
+	select CRYPTO
+	select CRYPTO_DEFLATE
+	---help---
+	  Support for IP Payload Compression Protocol (IPComp) (RFC3173),
+	  typically needed for IPsec.
+	  
+	  If unsure, say Y.
+
+config INET_TUNNEL
+	tristate "IP: tunnel transformation"
+	depends on INET
+	select XFRM
+	---help---
+	  Support for generic IP tunnel transformation, which is required by
+	  the IP tunneling module as well as tunnel mode IPComp.
+	  
+	  If unsure, say Y.
+
+config IP_TCPDIAG
+	tristate "IP: TCP socket monitoring interface"
+	depends on INET
+	default y
+	---help---
+	  Support for TCP socket monitoring interface used by native Linux
+	  tools such as ss. ss is included in iproute2, currently downloadable
+	  at <http://developer.osdl.org/dev/iproute2>. If you want IPv6 support
+	  and have selected IPv6 as a module, you need to build this as a
+	  module too.
+	  
+	  If unsure, say Y.
+
+config IP_TCPDIAG_IPV6
+	def_bool (IP_TCPDIAG=y && IPV6=y) || (IP_TCPDIAG=m && IPV6)
+
+source "net/ipv4/ipvs/Kconfig"
+