Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

1 files changed, 174 insertions, 20 deletions

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 855126a3039d..9d4e4d846ec1 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -17,13 +17,6 @@
 #include "rate.h"
 #include "mesh.h"
 
-struct ieee80211_hw *wiphy_to_hw(struct wiphy *wiphy)
-{
-	struct ieee80211_local *local = wiphy_priv(wiphy);
-	return &local->hw;
-}
-EXPORT_SYMBOL(wiphy_to_hw);
-
 static bool nl80211_type_check(enum nl80211_iftype type)
 {
 	switch (type) {
@@ -33,6 +26,8 @@ static bool nl80211_type_check(enum nl80211_iftype type)
 #ifdef CONFIG_MAC80211_MESH
 	case NL80211_IFTYPE_MESH_POINT:
 #endif
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_AP_VLAN:
 	case NL80211_IFTYPE_WDS:
 		return true;
 	default:
@@ -315,12 +310,35 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 
 	sinfo->filled = STATION_INFO_INACTIVE_TIME |
 			STATION_INFO_RX_BYTES |
-			STATION_INFO_TX_BYTES;
+			STATION_INFO_TX_BYTES |
+			STATION_INFO_TX_BITRATE;
 
 	sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx);
 	sinfo->rx_bytes = sta->rx_bytes;
 	sinfo->tx_bytes = sta->tx_bytes;
 
+	if (sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) {
+		sinfo->filled |= STATION_INFO_SIGNAL;
+		sinfo->signal = (s8)sta->last_signal;
+	}
+
+	sinfo->txrate.flags = 0;
+	if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)
+		sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS;
+	if (sta->last_tx_rate.flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+		sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
+	if (sta->last_tx_rate.flags & IEEE80211_TX_RC_SHORT_GI)
+		sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+
+	if (!(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)) {
+		struct ieee80211_supported_band *sband;
+		sband = sta->local->hw.wiphy->bands[
+				sta->local->hw.conf.channel->band];
+		sinfo->txrate.legacy =
+			sband->bitrates[sta->last_tx_rate.idx].bitrate;
+	} else
+		sinfo->txrate.mcs = sta->last_tx_rate.idx;
+
 	if (ieee80211_vif_is_mesh(&sdata->vif)) {
 #ifdef CONFIG_MAC80211_MESH
 		sinfo->filled |= STATION_INFO_LLID |
@@ -401,8 +419,10 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
 	 */
 	if (params->interval) {
 		sdata->local->hw.conf.beacon_int = params->interval;
-		if (ieee80211_hw_config(sdata->local))
-			return -EINVAL;
+		err = ieee80211_hw_config(sdata->local,
+					IEEE80211_CONF_CHANGE_BEACON_INTERVAL);
+		if (err < 0)
+			return err;
 		/*
 		 * We updated some parameter so if below bails out
 		 * it's not an error.
@@ -589,6 +609,8 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
 
+	sband = local->hw.wiphy->bands[local->oper_channel->band];
+
 	/*
 	 * FIXME: updating the flags is racy when this function is
 	 *	  called from ieee80211_change_station(), this will
@@ -629,7 +651,6 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 
 	if (params->supported_rates) {
 		rates = 0;
-		sband = local->hw.wiphy->bands[local->oper_channel->band];
 
 		for (i = 0; i < params->supported_rates_len; i++) {
 			int rate = (params->supported_rates[i] & 0x7f) * 5;
@@ -641,10 +662,10 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 		sta->sta.supp_rates[local->oper_channel->band] = rates;
 	}
 
-	if (params->ht_capa) {
-		ieee80211_ht_cap_ie_to_ht_info(params->ht_capa,
-					       &sta->sta.ht_info);
-	}
+	if (params->ht_capa)
+		ieee80211_ht_cap_ie_to_sta_ht_cap(sband,
+						  params->ht_capa,
+						  &sta->sta.ht_cap);
 
 	if (ieee80211_vif_is_mesh(&sdata->vif) && params->plink_action) {
 		switch (params->plink_action) {
@@ -665,6 +686,7 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 	struct sta_info *sta;
 	struct ieee80211_sub_if_data *sdata;
 	int err;
+	int layer2_update;
 
 	/* Prevent a race with changing the rate control algorithm */
 	if (!netif_running(dev))
@@ -695,17 +717,25 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 
 	rate_control_rate_init(sta);
 
+	layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
+		sdata->vif.type == NL80211_IFTYPE_AP;
+
 	rcu_read_lock();
 
 	err = sta_info_insert(sta);
 	if (err) {
 		/* STA has been freed */
+		if (err == -EEXIST && layer2_update) {
+			/* Need to update layer 2 devices on reassociation */
+			sta = sta_info_get(local, mac);
+			if (sta)
+				ieee80211_send_layer2_update(sta);
+		}
 		rcu_read_unlock();
 		return err;
 	}
 
-	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
-	    sdata->vif.type == NL80211_IFTYPE_AP)
+	if (layer2_update)
 		ieee80211_send_layer2_update(sta);
 
 	rcu_read_unlock();
@@ -957,6 +987,72 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev,
 	rcu_read_unlock();
 	return 0;
 }
+
+static int ieee80211_get_mesh_params(struct wiphy *wiphy,
+				struct net_device *dev,
+				struct mesh_config *conf)
+{
+	struct ieee80211_sub_if_data *sdata;
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
+		return -ENOTSUPP;
+	memcpy(conf, &(sdata->u.mesh.mshcfg), sizeof(struct mesh_config));
+	return 0;
+}
+
+static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask)
+{
+	return (mask >> (parm-1)) & 0x1;
+}
+
+static int ieee80211_set_mesh_params(struct wiphy *wiphy,
+				struct net_device *dev,
+				const struct mesh_config *nconf, u32 mask)
+{
+	struct mesh_config *conf;
+	struct ieee80211_sub_if_data *sdata;
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
+		return -ENOTSUPP;
+
+	/* Set the config options which we are interested in setting */
+	conf = &(sdata->u.mesh.mshcfg);
+	if (_chg_mesh_attr(NL80211_MESHCONF_RETRY_TIMEOUT, mask))
+		conf->dot11MeshRetryTimeout = nconf->dot11MeshRetryTimeout;
+	if (_chg_mesh_attr(NL80211_MESHCONF_CONFIRM_TIMEOUT, mask))
+		conf->dot11MeshConfirmTimeout = nconf->dot11MeshConfirmTimeout;
+	if (_chg_mesh_attr(NL80211_MESHCONF_HOLDING_TIMEOUT, mask))
+		conf->dot11MeshHoldingTimeout = nconf->dot11MeshHoldingTimeout;
+	if (_chg_mesh_attr(NL80211_MESHCONF_MAX_PEER_LINKS, mask))
+		conf->dot11MeshMaxPeerLinks = nconf->dot11MeshMaxPeerLinks;
+	if (_chg_mesh_attr(NL80211_MESHCONF_MAX_RETRIES, mask))
+		conf->dot11MeshMaxRetries = nconf->dot11MeshMaxRetries;
+	if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask))
+		conf->dot11MeshTTL = nconf->dot11MeshTTL;
+	if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask))
+		conf->auto_open_plinks = nconf->auto_open_plinks;
+	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, mask))
+		conf->dot11MeshHWMPmaxPREQretries =
+			nconf->dot11MeshHWMPmaxPREQretries;
+	if (_chg_mesh_attr(NL80211_MESHCONF_PATH_REFRESH_TIME, mask))
+		conf->path_refresh_time = nconf->path_refresh_time;
+	if (_chg_mesh_attr(NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, mask))
+		conf->min_discovery_timeout = nconf->min_discovery_timeout;
+	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, mask))
+		conf->dot11MeshHWMPactivePathTimeout =
+			nconf->dot11MeshHWMPactivePathTimeout;
+	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, mask))
+		conf->dot11MeshHWMPpreqMinInterval =
+			nconf->dot11MeshHWMPpreqMinInterval;
+	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+			   mask))
+		conf->dot11MeshHWMPnetDiameterTraversalTime =
+			nconf->dot11MeshHWMPnetDiameterTraversalTime;
+	return 0;
+}
+
 #endif
 
 static int ieee80211_change_bss(struct wiphy *wiphy,
@@ -972,25 +1068,79 @@ static int ieee80211_change_bss(struct wiphy *wiphy,
 		return -EINVAL;
 
 	if (params->use_cts_prot >= 0) {
-		sdata->bss_conf.use_cts_prot = params->use_cts_prot;
+		sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot;
 		changed |= BSS_CHANGED_ERP_CTS_PROT;
 	}
 	if (params->use_short_preamble >= 0) {
-		sdata->bss_conf.use_short_preamble =
+		sdata->vif.bss_conf.use_short_preamble =
 			params->use_short_preamble;
 		changed |= BSS_CHANGED_ERP_PREAMBLE;
 	}
 	if (params->use_short_slot_time >= 0) {
-		sdata->bss_conf.use_short_slot =
+		sdata->vif.bss_conf.use_short_slot =
 			params->use_short_slot_time;
 		changed |= BSS_CHANGED_ERP_SLOT;
 	}
 
+	if (params->basic_rates) {
+		int i, j;
+		u32 rates = 0;
+		struct ieee80211_local *local = wiphy_priv(wiphy);
+		struct ieee80211_supported_band *sband =
+			wiphy->bands[local->oper_channel->band];
+
+		for (i = 0; i < params->basic_rates_len; i++) {
+			int rate = (params->basic_rates[i] & 0x7f) * 5;
+			for (j = 0; j < sband->n_bitrates; j++) {
+				if (sband->bitrates[j].bitrate == rate)
+					rates |= BIT(j);
+			}
+		}
+		sdata->vif.bss_conf.basic_rates = rates;
+		changed |= BSS_CHANGED_BASIC_RATES;
+	}
+
 	ieee80211_bss_info_change_notify(sdata, changed);
 
 	return 0;
 }
 
+static int ieee80211_set_txq_params(struct wiphy *wiphy,
+				    struct ieee80211_txq_params *params)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_tx_queue_params p;
+
+	if (!local->ops->conf_tx)
+		return -EOPNOTSUPP;
+
+	memset(&p, 0, sizeof(p));
+	p.aifs = params->aifs;
+	p.cw_max = params->cwmax;
+	p.cw_min = params->cwmin;
+	p.txop = params->txop;
+	if (local->ops->conf_tx(local_to_hw(local), params->queue, &p)) {
+		printk(KERN_DEBUG "%s: failed to set TX queue "
+		       "parameters for queue %d\n", local->mdev->name,
+		       params->queue);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ieee80211_set_channel(struct wiphy *wiphy,
+				 struct ieee80211_channel *chan,
+				 enum nl80211_channel_type channel_type)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+
+	local->oper_channel = chan;
+	local->oper_channel_type = channel_type;
+
+	return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+}
+
 struct cfg80211_ops mac80211_config_ops = {
 	.add_virtual_intf = ieee80211_add_iface,
 	.del_virtual_intf = ieee80211_del_iface,
@@ -1013,6 +1163,10 @@ struct cfg80211_ops mac80211_config_ops = {
 	.change_mpath = ieee80211_change_mpath,
 	.get_mpath = ieee80211_get_mpath,
 	.dump_mpath = ieee80211_dump_mpath,
+	.set_mesh_params = ieee80211_set_mesh_params,
+	.get_mesh_params = ieee80211_get_mesh_params,
 #endif
 	.change_bss = ieee80211_change_bss,
+	.set_txq_params = ieee80211_set_txq_params,
+	.set_channel = ieee80211_set_channel,
 };